Quality inspection jobs in PlymouthCreate job alerts

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the South West: Bath Bournemouth Bristol Gloucester Poole Taunton Trowbridge A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Working for a world-renowned manufacturer, pushing the boundaries of innovation and precision engineering for over 75 years. My client is committed to nurturing talent and professional growth.My client fosters a culture of innovation, collaboration and excellence, continually investing in the latest technologies to support our customers across the aerospace and precision engineering sectors.Job DescriptionWe're looking for an experienced and passionateLead Metrology Engineerto become the technical expert in dimensional measurement. This is an exciting opportunity for someone who enjoys remaining hands-on while leading the development of measurement capability across the business.You'll work closely with Engineering, Manufacturing and Quality teams to develop robust measurement strategies, support new product introduction and drive continuous improvement across our metrology processes. You'll also play a key role in mentoring colleagues, introducing new technologies and helping to standardise best practice throughout the organisation.If you're someone who enjoys solving complex measurement challenges, embracing new technology and making a real impact on manufacturing excellence, we'd love to hear from you.Key ResponsibilitiesLead the development, standardisation and continuous improvement of metrology processes across the business.Develop inspection methods, measurement strategies, fixturing solutions and work instructions to improve quality and efficiency.Remain hands-on with dimensional inspection activities, supporting production and engineering with complex measurement requirements.Work alongside Manufacturing Engineers during new product introduction to validate machining processes and provide measurement expertise.Programme and optimise CMM routines to improve repeatability, efficiency and inspection capability.Research, evaluate and introduce new metrology technologies, equipment and industry best practice.Provide technical guidance and mentoring to the metrology team, promoting consistent working methods and continuous development.Support Measurement System Analysis (MSA) activities including Gauge R&R, bias and linearity studies.Prepare and support dimensional documentation for FAIR and PPAP submissions.Ensure all measurement activities meet customer, regulatory and internal quality requirements.Promote continuous improvement initiatives across the department.Candidate RequirementsDegree qualified in a STEM discipline or equivalent practical engineering experience.Minimum of 5 years' experience within dimensional inspection of precision engineered components.Strong experience using both Coordinate Measuring Machines (CMM) and conventional measurement equipment.Proven CMM programming experience, ideally usingZeiss Calypsosoftware.Excellent understanding of Geometric Dimensioning & Tolerancing (GD&T).Knowledge of dimensional measurement standards, PPAP requirements and Measurement System Analysis (MSA).A proactive approach with excellent problem-solving skills and the ability to work effectively under changing priorities.Passionate about continuous improvement and developing standardised ways of working.Strong communication skills with the ability to coach and influence colleagues across multiple departments.DesirableExperience within aerospace or precision engineering manufacture.Knowledge of turning, grinding design.Experience using 3D CAD software, ideally SolidWorks.TPBN1_UKTJ

Position : Registered Manager Supported AccommodationLocation: Birmingham & PlymouthSalary: £45,000 £55,000 per annumHours : Full-timeCareer Makers are partnering with a highly regarded care provider who are seeking an experienced and motivated Ofsted Registered Manager to lead and oversee their Supported Accommodation services for young people aged 16 -17 across Birmingham and Plymouth.This is an excellent opportunity for a strong leader with experience successfully leading an Ofsted inspection and delivering high-quality, person-centred services. You will be responsible for regulatory compliance, safeguarding, team leadership, service improvement and achieving positive outcomes for young people.Benefits as an Ofsted Registered Manager:Competitive pay increase with longevityGenerous paid annual leaveCompany pension schemeOngoing training & developmental opportunitiesCompany eventsFree parkingOn-site parkingSick payCareer development and training opportunitiesResponsibilities as an Ofsted Registered Manager :Lead the day-to-day operations of multiple services, ensuring Ofsted compliance, safeguarding and high-quality care.Lead and develop teams, overseeing recruitment, performance, audits and continuous service improvement.Build strong relationships with Ofsted, Local Authorities and external professionals, while managing resources and travelling between services.Requirements as an Ofsted Registered Manager:Previous experience as an Ofsted Registered Manager or experienced Deputy Manager ready to register.Proven experience of successfully completing at least one Ofsted inspection within Children's Residential or Supported Accommodation.Level 5 Diploma in Leadership and Management for Residential Childcare, equivalent qualification, or currently working towards it.Willingness to travel regularly between Birmingham, Plymouth and surrounding areas.Are you an experienced Ofsted Registered Manager looking for an opportunity to lead multiple services and make a real difference to the lives of young people?APPLY NOW to find out more or contact Umay at Career Makers on 0161 764 2169 todayPlease note: This position does not offer any sponsorshipTPBN1_UKTJ

Location: Plymouth, Devon Job Type: Permanent Hours: Full Time – 39 hours per weekThe Opportunity A leading industrial services contractor is seeking Basic Scaffolders (NVQ Level 2) to join its growing team on a permanent basis, supporting work on major industrial and engineering projects in Plymouth.This is an excellent opportunity to join a well-established business that offers long-term career stability, ongoing training and genuine opportunities for progression. You'll become part of a professional scaffolding team delivering safe, high-quality access solutions across a range of industrial environments.The Role As a Basic Scaffolder, you will be responsible for the erection, alteration and dismantling of scaffolding structures while working as part of an experienced scaffolding team. You will ensure all work is completed safely, efficiently and in line with current industry legislation and best practice.Applicants must hold a valid CISRS Basic Scaffolder Card (NVQ Level 2 or equivalent).Key Responsibilities The successful candidate will demonstrate knowledge and practical experience of:Statutory regulations and safety requirements (including SG4) relating to the erection and dismantling of simple scaffolds.The types, uses and purposes of scaffold tubes, boards and fittings in common use.The correct handling, stacking and inspection of scaffold tubes, boards and fittings.Founding scaffolds on ground, concrete and steel surfaces.The safe installation of standards, ledgers, transoms and bracing.Basic tying patterns for sheeted and un-sheeted scaffolds.Work at Height Regulations relating to working platforms.Safe access systems including ladders, ladder towers and stairways.Inspection, use and operation of gin wheels.Inspection requirements for scaffolding structures.The safe erection and dismantling of independent scaffolds, putlog scaffolds, towers and birdcage scaffolds up to three lifts high using tube and fitting.Selection and safe use of scaffold materials.Installation of prefabricated beams and scaffold protection fans.Erection of scaffolds in public areas in accordance with Local Authority requirements.Installation of spurs, rakers, anchor ties and specialist fixings in accordance with current industry standards and TG4 guidance.Selection and installation of ties for both sheeted and un-sheeted scaffolds.Planning materials and sequencing work for scaffold erection and dismantling.Inspection of basic scaffold structures prior to handover.Leading a scaffold gang carrying out scaffolding operations.You may be required to travel between project locations, with occasional overnight stays where required.Reporting Relationships You will work closely with:Externally:Client site representativesInternally:Site managementSupervisorsScaffolding teams and colleaguesEssential Skills Ability to follow instructions.Strong practical skills.Good sense of balance and confidence working at height.Excellent hand-to-eye coordination.Good level of physical fitness.Strong organisational skills.Ability to work effectively as part of a team.Understanding of safe working practices.Ability to competently plan work at height.Essential Knowledge Tube & Fitting Scaffolding.Health & Safety legislation.Desirable Knowledge Numeracy and literacy skills.Experience with Layher, Cuplock, HAKI or Plettac scaffold systems.Essential Experience Trained to Basic Scaffolder level.Minimum 2 years' scaffolding experience .Essential Qualifications CISRS Part 1 & Part 2 Scaffold Training.NVQ Level 2 in Scaffolding.CISRS Basic Scaffolder Card.CISRS Operative Training Scheme (COTS).Current Health & Safety qualification.Desirable Qualifications GCSE Maths & English (or equivalent).GCSE Design & Technology.TPBN1_UKTJ

CNC Setter/Operator - 2 shift M-F \n Plymouth \n £32,000 - £34,000 \n \n Yolk Recruitment are partnered with this leading high-precision manufacturing business as they continue to grow. With a strong history of secure long term contracts the business has always offered security and the opportunity to develop in a well run, world class operation, manufacturing high quality components. \n \n Whether you're an experienced CNC Machinist or at an earlier point in your career, there's opportunity for you here. The business has a range of work with varying levels of challenge, and a strong training resource with proven track record developing people to reach their potential as Machinists. \n \n You'll have the opportunity to progression and broaden your experience across different machines, develop your technical knowledge, and work with modern equipment and advanced machining techniques. \n \n This is a shift role, working a 2 shift pattern, rotating weeks of 6am-2pm and 2pm-10pm, with opportunities for other shift patterns available in the future. Overtime is available and the business offers a well-developed benefits package. \n \n This is what you'll be doing: \n \n\n • Setting and/or operating CNC machines\n, • Producing components to engineering specifications\n, • Carrying out first-off inspections and in-process checks\n, • Reading and interpreting engineering drawings\n, • Using measuring equipment such as verniers, micrometers and gauges\n, • Working in line with health and safety procedures\n\n \n The experience you'll need in this role: \n \n\n • Experience and/or knowledge of machining processes in a precision engineering environment\n, • Able to read engineering drawings\n, • Experience using inspection and measuring equipment\n, • Formal engineering qualification is advantageous but experience also values\n\n \n And this is what you'll get in return: \n \n\n • Annual pay review\n, • 25 days + bank holidays\n, • 13% pension\n, • Life assurance Enhanced maternity/paternity leave\n, • Company sick pay policy\n, • Flexible benefits package\n, • Employee assistance program\n, • Training and development\n, • Proven progression opportunities\n\n \n If you're working in machining or a machine room environment and looking for long-term career prospects, this could be the ideal next step. \n \n Are you up to the challenge? \n If you feel you have the skills, experience and passion to be successful in this CNC Setter/Operator role apply now! \n *Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities. \n

CNC Setter/Operator - Permanent Nights \n Plymouth \n £39,000 \n \n Yolk Recruitment are partnered with this leading high-precision manufacturing business as they continue to grow. With a strong history of secure long term contracts the business has always offered security and the opportunity to develop in a well run, world class operation, manufacturing high quality components. \n \n Whether you're an experienced CNC Machinist or at an earlier point in your career, there's opportunity for you here. The business has a range of work with varying levels of challenge, and a strong training resource with proven track record developing people to reach their potential as Machinists. \n \n You'll have the opportunity to progression and broaden your experience across different machines, develop your technical knowledge, and work with modern equipment and advanced machining techniques. \n \n This is a shift role, working permanent nights shift. You'll work Sunday night through Friday morning. Your shift starts at 10:00pm on Sunday with each shift finishing at 6:00am the following morning (5 shifts per week). Opportunities for other shift patterns available in the future. Overtime is available and the business offers a well-developed benefits package. \n \n \n This is what you'll be doing: \n \n\n • Setting and/or operating CNC machines\n, • Producing components to engineering specifications\n, • Carrying out first-off inspections and in-process checks\n, • Reading and interpreting engineering drawings\n, • Using measuring equipment such as verniers, micrometers and gauges\n, • Working in line with health and safety procedures\n\n \n The experience you'll need in this role: \n \n\n • Experience and/or knowledge of machining processes in a precision engineering environment\n, • Able to read engineering drawings\n, • Experience using inspection and measuring equipment\n, • Formal engineering qualification is advantageous but experience also values\n\n \n And this is what you'll get in return: \n \n\n • Annual pay review\n, • 25 days + bank holidays\n, • 13% pension\n, • Life assurance Enhanced maternity/paternity leave\n, • Company sick pay policy\n, • Flexible benefits package\n, • Employee assistance program\n, • Training and development\n, • Proven progression opportunities\n\n \n If you're working in machining or a machine room environment and looking for long-term career prospects, this could be the ideal next step. \n \n Are you up to the challenge? \n If you feel you have the skills, experience and passion to be successful in this CNC Setter/Operator role apply now! \n *Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.

Location: Plymouth (PL6 7LH), onsite roleJob Type: Full Time, PermanentHQW AerospaceHQW Aerospace is a world-renowned manufacturer of super precision bearings, pushing the boundaries of innovation and precision engineering for over 75 years. We're committed to nurturing talent. Situated in the vibrant city of Plymouth, surrounded by the picturesque landscapes of Cornwall, we offer not only a stimulating work environment but also a lifestyle that blends work with leisure seamlessly. With stunning beaches, vibrant culinary scenes, and a wealth of social and sporting activities, Plymouth and its surroundings provide an exceptional backdrop for both personal and professional growth.We foster a culture of innovation, collaboration and excellence, continually investing in the latest technologies to support our customers across the aerospace and precision engineering sectors.Why Join Us?\n\n • Competitive Salary\n, • 25 days paid holiday, plus bank holidays\n, • Professional Development Investment from Day 1\n, • Subsidised Canteen with free tea and coffee\n, • Engagement and Rewards Platform, with access to discounts at over 100 retailers\n, • Free Parking\nPlease Note\n\n, • HQW Aerospace currently does not hold a sponsorship licence. Therefore, all candidates must have the right to work in the UK.\n, • Due to the nature of our business, security clearance may be required.\nJob DescriptionWe're looking for a Quality Compliance Technician / Coordinator to join our Quality Compliance team and help ensure that everything we deliver meets the exacting standards expected by our aerospace and defence customers.This is a varied role supporting product release, First Article Inspection Reports (FAIR) and quality documentation, while working closely with teams across Manufacturing, Engineering, the Standards Room and Customer Services.You'll play an important role in ensuring that quality records are accurate, documentation is completed to the required standards and customer, audit and product release deadlines are met.We're open to applicants at the start of their career as well as experienced quality professionals. The level of responsibility and salary will be matched to the skills and experience you bring.If you're highly organised, have excellent attention to detail and enjoy working in a role where accuracy and communication really matter, we'd love to hear from you.Key Responsibilities\n\n, • Carry out product release checks to ensure products and supporting documentation meet customer and internal requirements.\n, • Prepare, review and maintain First Article Inspection Report (FAIR) packs in line with AS9102 requirements.\n, • Maintain accurate and controlled quality records and documentation.\n, • Coordinate information and documentation across Manufacturing, Engineering, the Standards Room and Customer Services.\n, • Support the timely completion of customer, audit and product release requirements.\n, • Review documentation for accuracy, completeness and compliance with applicable quality standards.\n, • Identify discrepancies, missing information or potential issues and ensure these are appropriately followed up and escalated.\n, • Support the Quality Compliance team with internal and external audit activities.\n, • Communicate effectively with colleagues, customers and auditors where required.\n, • Contribute to the ongoing improvement and standardisation of quality processes and documentation.\n, • Maintain a high level of accuracy and attention to detail across all quality activities.\n, • Support other Quality Compliance activities as required.\nCandidate Requirements\n\n, • Exceptional attention to detail and accuracy.\n, • A methodical and organised approach to documentation and follow-up.\n, • Strong communication skills, with the confidence to communicate with colleagues across different departments.\n, • The ability to identify issues, ask questions and escalate concerns where appropriate.\n, • A willingness to learn and develop knowledge of quality systems, standards and processes.\n, • Good organisational skills and the ability to manage competing priorities and deadlines.\n, • A proactive approach with the ability to work both independently and as part of a wider team.\nDesirable\n\n, • Experience within a quality, compliance or manufacturing environment.\n, • Experience within aerospace, defence or precision engineering.\n, • Awareness of AS9100, AS9120, ISO9001 or AS9102.\n, • Experience of preparing or reviewing FAIR documentation.\n, • Experience working with quality records, inspection documentation or customer requirements.\nBeneficial\n\n, • An interest in engineering, CAD and technical drawings.\n, • An education with a STEM focus, at any level.\n, • Experience using Microsoft Office or similar document management systems.\n, • An interest in developing a career within Quality or Quality Compliance.\nJoin Our TeamJoin us today and become part of our mission to redefine the future of high-precision aerospace engineering.This is an excellent opportunity to develop your career within a specialist manufacturing environment, gaining valuable experience across quality compliance, customer requirements and internationally recognised aerospace standards.Whether you're taking your first step into a quality career or you're an experienced quality professional looking for your next challenge, we want to hear from you.Apply now to begin your next career with HQW Aerospace.Equality, Diversity and Inclusion StatementAt HQW Aerospace UK, we are committed to fostering a workplace that values and respects the diversity of all individuals. We believe that embracing equality, diversity and inclusion is not only the right thing to do but also essential for driving innovation, creativity and success in our future endeavours.

Electrical Project Engineer \n Plymouth | £45,000 - £55,000 + Package \n An established M&E contractor is looking to recruit an Electrical Project Engineer to support an increasing workload across a secure and technically challenging environment in Plymouth. \n This role offers an excellent opportunity for an experienced Electrical Supervisor looking to take the next step into project engineering, or an existing Project Engineer seeking greater responsibility and career progression. Working on a variety of refurbishment, infrastructure and building services projects, you will play a key role in the planning, coordination and delivery of electrical works from inception through to completion. \n The Role \n Working closely with operational teams and clients, you will be responsible for managing the day-to-day delivery of multiple electrical packages, ranging from small works through to medium-sized contracts. \n Typical duties will include: \n\n • Planning and coordinating electrical projects from award through to completion.\n, • Managing and overseeing site teams and subcontractors.\n, • Allocating labour resources and producing work schedules and programmes.\n, • Preparing RAMS, quality plans and project documentation.\n, • Monitoring project progress, quality and compliance.\n, • Coordinating materials, plant and subcontractors.\n, • Supporting client meetings and maintaining strong stakeholder relationships.\n, • Ensuring all works are delivered safely, efficiently and to programme.\n, • Assisting with project reporting, forecasting and programme updates.\n, • Supporting commissioning, handover and project close-out activities.\n\n About You \n We are looking for a motivated and organised electrical professional with strong technical knowledge and a proactive approach to project delivery. \n You will ideally possess: \n\n • Electrical NVQ Level 2 or equivalent qualification.\n, • 18th Edition Wiring Regulations.\n, • Previous experience within electrical installation, maintenance or infrastructure projects.\n, • Minimum SSSTS certification.\n, • CSCS Card\n, • First Aid at work\n, • Strong understanding of electrical systems including LV distribution, lighting and refurbishment works.\n, • Experience leading site teams or supervising electrical operatives.\n, • Good IT skills and confidence using project management and reporting systems.\n, • Excellent planning, communication and organisational abilities.\n, • Test & Inspection (2391 or equivalent) would be advantageous but is not essential.\n\n Due to the nature of the work, candidates must either hold current Security Clearance or be eligible to obtain clearance. \n Package \n\n • £45,000 - £55,000 salary\n, • Car allowance\n, • 25 days holiday plus bank holidays\n, • Pension scheme\n, • EV salary sacrifice scheme\n, • Enhanced family benefits\n, • Long-term career progression opportunities\n, • Secure and varied project workload\n\n This is a fantastic opportunity for an ambitious Electrical Supervisor or Electrical Engineer looking to progress into a project-focused role with a respected contractor delivering a diverse range of electrical projects. \n

Position: CNC Setter/Programmer \n Location: Plymouth \n Salary: £15 - £20 per hour (Plus Overtime and Career Progression Opportunities) \n \n Our client, a leading and well-established manufacturer based in Plymouth, specialises in precision-engineered products crafted from ferrous and non-ferrous metals. These high-tolerance, safety-critical components are designed for use in some of the world’s most exciting and challenging environments, including regulated markets such as Marine, Nuclear, Renewable Energy, and Oil & Gas. \n \n Renowned for their commitment to quality and excellence, our client operates from a large, clean, and well-organised facility where safety and precision are paramount. With a robust order book that reflects strong and sustained demand for their products, they are now looking to expand their team by recruiting enthusiastic and motivated CNC Setters/Programmers. \n \n Key Responsibilities: \n \n Set up, program, and operate CNC machining centres or CNC turning centres with precision and efficiency. \n Work with Fanuc or Siemens controls to produce components to exacting tolerances, ensuring compliance with detailed engineering drawings. \n Perform rigorous checks of manufactured components using precision measuring equipment to ensure they meet required specifications. \n Contribute to the production of safety-critical parts that are subject to high levels of inspection, guaranteeing accurate and consistent quality. \n Collaborate closely with other team members and departments to optimise manufacturing processes and ensure smooth workflow. \n Engage in continuous learning and development opportunities, including training on the latest CNC technologies and CAM software. \n \n Candidate Profile: \n \n The ideal candidate will have significant experience in CNC setting or operating, particularly with Fanuc or Siemens controls. You should be adept at working to close tolerances and have a strong ability to read and interpret engineering drawings. Experience with CAM software is advantageous but not essential, as our client is committed to providing comprehensive training to the right candidate. \n \n Why Join Us? \n \n Joining our client means becoming part of a dynamic team in a company that is not only a leader in its field but also deeply committed to the growth and development of its employees. With a full order book and a steady stream of exciting projects, you can be confident in the long-term stability and growth potential of your role. \n \n Our client places a strong emphasis on training and career development. \n Whether you're looking to enhance your existing skills or learn new ones, you’ll have access to a range of opportunities designed to help you grow professionally. \n \n The company offers a competitive hourly wage ranging from £15 to £20 per hour, plus ample overtime opportunities. More importantly, you’ll be working in an environment where your contributions are valued, and your career can flourish. \n \n If you are an experienced CNC Setter/Programmer with a passion for precision engineering and a desire to join a company that values training and development, we want to hear from you. \n \n Please send your CV to Gary Simpson for further information or to apply.

\n Metrology Technician \n Location: Plymouth \n Salary: £33,600 - £36,000 \n Hours: Permanent, alternating weekly shifts \n • Week 1: Monday to Friday, 6:00am - 2:00pm \n • Week 2: Monday to Friday, 2:00pm - 10:00pm \n Butler Rose is delighted to be recruiting on behalf of a well-established manufacturing business for a Metrology Technician to join their Quality team. This is an excellent opportunity for an experienced quality or inspection professional looking to develop their career within a technically advanced manufacturing environment. \n The Role \n As a Metrology Technician, you will provide vital support across metrology, calibration, inspection and quality assurance activities. Working within the Quality department, you will be responsible for carrying out accurate measurements, maintaining calibration systems, supporting production and ensuring compliance with quality standards. \n Key Responsibilities \n • Carry out dimensional measurements of materials and components against engineering specifications using a variety of metrology equipment. \n • Perform precise measurements using manual measuring tools, CMM equipment and 3D scanning systems. \n • Produce measurement reports and maintain full traceability of inspection records and samples. \n • Conduct material integrity testing including ultrasonic analysis and hardness testing (Rockwell, Brinell, Vickers and Leeb). \n • Prepare materials for metallurgical analysis including resin mounting, polishing and microscopy examination. \n • Generate and maintain measurement programmes for CMM and optical measurement equipment. \n • Calibrate internal gauges and measuring equipment in line with relevant standards. \n • Coordinate external calibration activities where required. \n • Carry out gauge servicing and repairs where possible. \n • Provide support to quality assurance and production teams, including problem solving, training and verification activities. \n • Assist with Customer Acceptance Line (CAL) activities when required, providing holiday and sickness cover. \n • Maintain a clean, organised and safe working environment. \n • Promote and comply with all quality, health and safety procedures. \n About You \n • Qualifications in Maths and English. \n • Ability to read and interpret engineering drawings. \n • Experience using dimensional metrology equipment and measurement instruments. \n • Strong attention to detail with a methodical and organised approach. \n • Ability to manage multiple priorities and consistently deliver accurate work. \n • Flexible attitude and willingness to learn. \n • Ability to adapt to changing business needs. \n \n What's on Offer? \n • Salary of £33,600 - £36,000. \n • Permanent full-time position. \n • Monday to Friday working pattern with alternating weekly shifts. \n • Opportunity to work with advanced inspection and measurement technologies. \n • Training and development opportunities within a growing quality function. \n • Supportive and professional manufacturing environment. \n If you're an experienced Metrology Technician, Quality Inspector or Calibration Technician looking for your next challenge, we'd love to hear from you. Apply now to find out more. \n #IND-HL-25 \n \n \n Butler Rose is committed to equality in the workplace and is an equal opportunity employer.Butler Rose Ltd is acting as an Employment Business in relation to this vacancy. \n

Lead CMM & Metrology EngineerLocation: Plymouth (PL6 7LH), onsite roleJob Type: Full Time, Permanent HQW Aerospace HQW Aerospace is a world-renowned manufacturer of super precision bearings, pushing the boundaries of innovation and precision engineering for over 75 years. We're committed to nurturing talent. Situated in the vibrant city of Plymouth, surrounded by the picturesque landscapes of Cornwall, we offer not only a stimulating work environment but also a lifestyle that blends work with leisure seamlessly. With stunning beaches, vibrant culinary scenes, and a wealth of social and sporting activities, Plymouth and its surroundings provide an exceptional backdrop for both personal and professional growth.We foster a culture of innovation, collaboration and excellence, continually investing in the latest technologies to support our customers across the aerospace and precision engineering sectors. Why Join Us?\n\n • Competitive Salary\n, • 25 days paid holiday, plus bank holidays\n, • Professional Development Investment from Day 1\n, • Subsidised Canteen with free tea and coffee\n, • Engagement and Rewards Platform, with access to discounts at over 100 retailers\n, • Free Parking\nPlease Note\n\n, • HQW Aerospace currently does not hold a sponsorship licence. Therefore, all candidates must have the right to work in the UK.\n, • Due to the nature of our business, security clearance may be required.\nJob Description We're looking for an experienced and passionate Lead Metrology Engineer to become our technical expert in dimensional measurement. This is an exciting opportunity for someone who enjoys remaining hands-on while leading the development of measurement capability across the business.You'll work closely with Engineering, Manufacturing and Quality teams to develop robust measurement strategies, support new product introduction and drive continuous improvement across our metrology processes. You'll also play a key role in mentoring colleagues, introducing new technologies and helping to standardise best practice throughout the organisation.If you're someone who enjoys solving complex measurement challenges, embracing new technology and making a real impact on manufacturing excellence, we'd love to hear from you. Key Responsibilities\n\n, • Lead the development, standardisation and continuous improvement of metrology processes across the business.\n, • Develop inspection methods, measurement strategies, fixturing solutions and work instructions to improve quality and efficiency.\n, • Remain hands-on with dimensional inspection activities, supporting production and engineering with complex measurement requirements.\n, • Work alongside Manufacturing Engineers during new product introduction to validate machining processes and provide measurement expertise.\n, • Programme and optimise CMM routines to improve repeatability, efficiency and inspection capability.\n, • Research, evaluate and introduce new metrology technologies, equipment and industry best practice.\n, • Provide technical guidance and mentoring to the metrology team, promoting consistent working methods and continuous development.\n, • Support Measurement System Analysis (MSA) activities including Gauge R&R, bias and linearity studies.\n, • Prepare and support dimensional documentation for FAIR and PPAP submissions.\n, • Ensure all measurement activities meet customer, regulatory and internal quality requirements.\n, • Promote continuous improvement initiatives across the department.\nCandidate Requirements\n\n, • Degree qualified in a STEM discipline or equivalent practical engineering experience.\n, • Minimum of 5 years' experience within dimensional inspection of precision engineered components.\n, • Strong experience using both Coordinate Measuring Machines (CMM) and conventional measurement equipment.\n, • Proven CMM programming experience, ideally using Zeiss Calypso software.\n, • Excellent understanding of Geometric Dimensioning & Tolerancing (GD&T).\n, • Knowledge of dimensional measurement standards, PPAP requirements and Measurement System Analysis (MSA).\n, • A proactive approach with excellent problem-solving skills and the ability to work effectively under changing priorities.\n, • Passionate about continuous improvement and developing standardised ways of working.\n, • Strong communication skills with the ability to coach and influence colleagues across multiple departments.\nDesirable\n\n, • Experience within aerospace, precision engineering or bearing manufacture.\n, • Knowledge of turning, grinding or bearing design.\n, • Experience using 3D CAD software, ideally SolidWorks.\nJoin Our Team Join us today and become part of our mission to redefine the future of high-precision aerospace engineering. This is an opportunity to shape the future of metrology within a growing manufacturing business while remaining at the forefront of measurement technology.Apply now to begin your next career with HQW Aerospace. Equality, Diversity and Inclusion Statement At HQW Aerospace UK, we are committed to fostering a workplace that values and respects the diversity of all individuals. We believe that embracing equality, diversity and inclusion is not only the right thing to do but also essential for driving innovation, creativity and success in our future endeavours.REF-230 466

Position: Lead Field Service Technician (Lifeboats)Job ID: LFST1Location: UK Home Based Rate/Salary: £60,000Type: PermanentBenefits: Pension, Life Assurance, 26 days plus BH and more.HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Fire & Security sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.Working as the Lead Field Service Technician you will commission, service, inspect and repair Life Saving Appliances, with a particular focus on Totally Enclosed Mechanically Propelled Survival Craft (TEMPSC). Working both onshore and offshore, you will ensure all work is completed safely, efficiently and in accordance with customer requirements and industry standards. You will take ownership of each project from the initial job briefing through to completion, preparing all required documentation, tools, travel arrangements and technical information before attending site.You will be responsible for producing accurate service reports and maintaining the highest standards of quality and customer service. The successful candidate will have a strong understanding of SOLAS regulations and marine safety standards, with the ability to work independently, travel extensively and confidently represent the company while delivering exceptional service to customers worldwide.Duties and responsibilities of the Lead Field Service Technician:Carry out the inspection, servicing, commissioning and repair of lifeboats and other life-saving appliances at customer sites focusing on the UK and Europe, with some rare long distance travelComplete work scopes safely, efficiently and to agreed timescales.Liaise with the Service Team and Regional Manager to report technical issues, safety concerns, critical defects and additional work requirements.Produce accurate service reports, inspection records and supporting documentation, including photographic evidence where required.Conduct inspections and testing in accordance with SOLAS regulations, manufacturer specifications and company quality standards.Carry out on-site risk assessments, Job Safety Analysis (JSA) and ensure all work complies with health, safety and environmental procedures.Ensure all PPE, tools and equipment are maintained and fit for purpose.Clearly explain inspection findings, critical defects and recommended remedial work to customers and vessel management.Identify opportunities for additional maintenance or repair work and support the preparation of quotations.Represent the company professionally at all times, delivering exceptional customer service and maintaining strong client relationships.Participate in job debriefs and provide detailed technical feedback to support future service work.Support workshop operations when based onshore, assisting with refurbishment, repairs and preparation of equipment as requiredQualifications and requirement for the Lead Field Service Technician:Driving LicenceAbility to Travel Overseas on helicopters, planes and vessels as work will be on vessels, oil rigs and more.Happy to be away from hoom for up to 3 weeks at at time (jobs can last 2 days to 3 weeks)This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.TPBN1_UKTJ

Housing Estates Officer (EO)Location: Plymouth, PL6 5DW Pay Rate £15.96 per hour First 2 weeks training requires full office attendance; then hybrid working (approx. 60% office / 2 days home) Training may be ongoing and travel to other locations may be required DBS clearance is required (Costs covered by the hiring process) Assignment runs until 31/03/27 with possibility of extension CIOH Certificate of Housing (or similar) is desirable. Holidays during the first 2 weeks of training cannot be accommodatedIf you're someone who enjoys variety, strong standards, and making sure services land properly for the people who rely on them, this could be a great match. Our Client, within the MOD, is looking for an EO Housing Estates Officer to help validate and authorise key housing activities-supporting consistent delivery and quality across an allocated portfolio.What you'll be doing: Own the 'family experience' for an allocated housing portfolio, including occupant monitoring of non-SFA and SSFA Conduct patch/ground monitoring to ensure standards are met (including PFI where relevant) Manage assurance and quality checks, including timely handling and management of complaints (level 2) Undertake assurance checks on service levels and quality of work provided by suppliers Manage an allocated IMS case to agreed standards Help deliver additional services (including IRL/SONS/VOIDS) within delegation and timeframes Validate and authorise time reliefs within approved limits Carry out handovers as requested to ensure the right service delivery for families Attend relevant stakeholder engagement events and proactively escalate where standards are not metWhat you'll bring: A confident, organised approach to validation, monitoring and authorisation A strong commitment to compliance and mandatory requirements (including inspection and training expectations) The ability to build effective working relationships with teams and stakeholders A customer-first mindset with a drive to improve outcomes for families Comfort working with case/portfolio responsibilities while maintaining agreed standards Self-motivation to identify and complete relevant training and development to grow capability in-roleReady to bring structure, standards and care to housing delivery? Apply now-our Client will be in touch to discuss next steps.Brook Street is proud to support the Armed Forces Covenant and as such, we guarantee to interview all candidates who are veterans or spouses/partners of military personnel, and who meet all the essential criteria for the vacancy.As a Disability Confident Leader, and holder of the Gold Award status from the Defence Employer Recognition Scheme, Brook Street, as a supplier to the Public Sector Resourcing Framework (PSR), will offer you a guaranteed interview with a PSR Sourcer.Should you identify as a candidate with a disability and/or as a veteran or spouse/partner of military personnel and meet all the essential criteria for the role, we encourage you to reach out to us via the Brook Street website. Here you will find a link to register your interest and state the role that you are interested in. We are committed to engaging with you.In cases where we have a high volume of ex-military candidates/military spouses/partners, who meet all of the essential criteria, Brook Street will interview the best candidates from within that group.Due to the high volume of applications we receive, we are only able to contact candidates who have been selected to progress to the next stage of the recruitment process. If you have not heard from us within 1 week of your application, please assume that your application has not been successful on this occasion. We encourage you to keep an eye on our current vacancies and welcome applications for any future roles that match your skills and experience.If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.TPBN1_UKTJ

NegotiablePlymouth, England Contract Our client, a prominent player in the Defence & Security sector, is currently seeking a Quality Engineer to join their team on a contract basis at the Devonport Royal Dockyard in Plymouth. This role involves developing and implementing quality assurance and control processes to ensure that products and services meet stringent quality standards.Key Responsibilities:Developing and executing inspection and testing proceduresConducting root cause analysis and supporting problem-solving activitiesMonitoring production or construction processes for quality complianceReviewing documentation and verifying that materials/products meet specificationsSupporting audits and quality system implementationsAssisting in corrective and preventive action (CAPA) processesCollecting and analysing quality data to identify trends and improvementsJob Requirements:Professionally qualified operator and/or graduateQuality-related qualifications and industry experience, particularly with ISO standardsExperience in a similar role, preferably within the Nuclear and Defence sectorCSCS Green Labourer certificationStrong understanding of quality principles, inspection methods, and testingFamiliarity with quality tools such as FMEA, SPC, and root cause analysisKnowledge of relevant standards, specifically ISO 9001 and industry-specific standardsBasic statistical and data analysis skillsExcellent communication and problem-solving abilitiesDue to the sensitive nature of the site, BPSS security clearance is required, which can take up to 8 weeks. Please note that eligibility for certain roles may be affected by your place of birth, nationality, and any current or former citizenship and residency. Working hours are 45 hours per week, from 07:30 to 17:00, reporting into the Principal Quality Engineer. If you are an experienced Quality Engineer looking for a challenging opportunity in the Defence & Security sector, we would love to hear from you. Apply now to join our client's dynamic team in Plymouth.

inside IR35Plymouth, England Contract Our client, a leader in the Defence & Security sector, is seeking a Site Engineer (Geotechnical) for a project in Plymouth. This contract role is integral to managing technical compliance and ensuring the project is completed safely, on time, and to the required quality.Key Responsibilities:Assist in the preparation of as-built drawings.Assist in establishing systems to record completed work and update the Project Quality Plan.Participate in developing quality check sheets and carrying out quality checks & surveys.Assist with site safety, environmental, and quality inspections.Manage systems to review progress against time, quality, dimensions, and quantity.Record and test workmanship and materials, including drilling, grouting & anchoring.Provide engineering support to overcome technical problems and answer queries.Set out works within allowable tolerances, as per the provided site control.Job Requirements:Academic qualification (Level 3 or above, such as HNC, HND, Degree).Proficiency in survey equipment (GPS, Total Station) for Setting Out & Survey.Experience in geotechnical applications such as drilling, grouting, anchor installation, inspection, and testing.Awareness of commercial processes.Familiarity with Quality Management Systems and the ability to write RAMS.Proven people and project management skills.Good standard of IT skills.Flexibility to work weekends and out of hours on a rota basis to suit project requirements.Desirable:Possession of TWS or TWC certification.First Aid at Work certification.SSSTS certification.Experience in geotechnical projects.Experience in nuclear projects.Progress towards Chartership/Incorporation with ICE or another professional body.

HeaderYour RoleApplies Engineering concepts and theories to deliver the development designs, calculations and technical solutions across a range of applications for Babcock products and services across the Engineering Product Lifecycle. An experienced Engineer, directly accountable for designs, calculations and technical solutions. Able to work under own initiative to produce high quality outputs. Capable of managing others and or delivery of engineering and technical activities, through the application of process, domain knowledge and experience. Can apply a wider range of knowledge to complex situations. Provides mentoring to othersDescriptionFooterJob Title: Senior Metallurgy and Materials EngineerLocation: Plymouth, DevonCompensation: From 44,600 Depending on Experience + BenefitsRole Type: Full time / PermanentRole ID: SF75265At Babcock, we’re working to create a safe and secure world together, and if you join us, you can play your part as a Senior Materials Engineer at our Devonport Royal Dockyard site.The roleAs a Senior Metallurgy and Materials Engineer, you’ll join our specialist Metallurgy & Materials team, where you will provide critical technical expertise to support the safety, performance, and availability of the Royal Navy's fleet and supporting assets. This is an exciting opportunity to apply advanced materials engineering knowledge in both laboratory and operational environments, investigate complex engineering challenges, and deliver solutions that directly impact national defence.On a day-to-day basis, you’ll lead specialist testing, analysis, and failure investigations to ensure the integrity and reliability of safety-critical components and systems. In return, you'll be exposed to unique defence programmes, innovative technologies, and ongoing opportunities for professional development within one of the UK's leading engineering organisations.Conduct materials testing, metallurgical analysis, and engineering evaluations to assess component integrity, performance, and compliance.Lead material failure investigations, root cause analysis, and on-site inspections, implementing corrective actions for corrosion and degradation issues.Provide specialist advice on material selection, fabrication, heat treatment, and engineering best practice to optimise safety and performance.Manage routine and specialist testing programmes, collaborating with multidisciplinary teams on safety-critical projects and customer requirements.Support quality assurance through supplier audits, process approvals, standards compliance, method development, and mentoring staff within a UKAS-accredited laboratory.This role is full-time, 35 hours per week, and based on-site at Devonport Royal Dockyard.Essential experience of the Senior Metallurgy and Materials EngineerExperience in a UKAS-accredited laboratory performing mechanical testing, metallography, weld evaluation, and certification review to international standards.Proven expertise in materials science/metallurgical engineering, including corrosion inspection, survey, and rectification, ideally within nuclear reactor systems.Experience authoring and reviewing test methods, technical documentation, and engineering reports.Strong understanding of safety legislation, digital engineering tools, data analysis, and image processing techniques.Defence sector experience, with excellent communication, collaborative working, and a commitment to continuous improvement and problem-solving.Qualifications for the Senior Metallurgy and Materials EngineerDegree in Materials Science, Materials Engineering, Metallurgy, or a related engineering discipline.Nuclear Standards Inspection and Component Staining Categorisation course would be highly beneficial.Nuclear Plant Foundation (Module 1) course would be highly beneficial.Membership of a relevant professional institution is desirable.Eligibility for professional registration with the UK Engineering Council at Incorporated Engineer or Chartered Engineer level is preferred.Security ClearanceThe successful candidate must be a sole UK National who is able to achieve and maintain Naval Nuclear Propulsion Information (NNPPI) security clearance for this role.Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held. Further details are available at United Kingdom Security Vetting: clearance levels - GOV.UK (www.gov.uk).What we offer Generous holiday allowanceMatched contribution pension scheme, with life assuranceAccess to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+Employee share schemeEmployee shopping savings portalPayment of Professional FeesReservists in the armed forces receive 10-days special paid leaveHoliday Trading is a benefit that allows UK Babcock employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. There is an annual Window to request this benefit. ‘Be Kind Day’ enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charityExcellent development opportunities and benefits package including an employee assistance programme supporting physical, mental and financial wellbeing.BabcockWe’re Babcock — a global FTSE 100 organisation with over 26,000 people working together to make a difference.Here, you’ll be part of something bigger. From initial design to final decommissioning, your work will contribute to products and services that are essential to national security and public infrastructure. Together, we’re building a future that lasts — not just through the impact we make, but through meaningful careers that respect your work-life balance.We call that lifetime engineering.Join us and see how far we can go, together.We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please emailcareers@babcockinternational.com with the subject header ‘Reasonable adjustments requirement’. We’re committed to building an inclusive culture where everyone’s free to thrive. We are happy to talk about flexible working – please ask about alternative patterns of work at interview.Application GuidanceThank you for your interest in this opportunity. Early applications are encouraged, as we may close the advert ahead of the closing date if we receive a high volume of strong applicants.Closing date: 17/09/2026#BABDESTNUC

We are seeking a dynamic and detail-oriented Product Technologist to join our team in Plymouth. This role is responsible for supporting product quality, safety and compliance throughout the product lifecycle. Working closely with buying teams, suppliers and third-party partners, you will coordinate inspections and audits, manage technical documentation, review product specifications and ensure products comply with relevant legislation and internal standards. You will also analyse technical data and certification, support new product introduction projects, investigate product and compliance issues, and identify opportunities for continuous improvement. The successful candidate will be highly organised and analytical, with excellent communication skills and the ability to manage multiple priorities in a fast-moving commercial environment. Key Responsibilities Coordinate pre-shipment inspections, DUPRO inspections, social compliance audits and associated documentation. Review packaging, labels and instruction manuals to ensure information is accurate and compliant. Prepare and maintain technical documentation and product specifications. Ensure production methods and products comply with relevant legislation and applicable standards. Support product introduction projects and associated technical activities. Maintain and input product quality, safety, compliance and due diligence data. Review and analyse testing, inspection reports and certification provided by third parties. Work independently while managing changing priorities and tight deadlines. Provide guidance and communicate technical information clearly to colleagues and suppliers. Request, review and process technical information from buyers and suppliers. Identify and implement opportunities for process and quality improvements. Liaise directly with buying teams, suppliers, internal departments and external service providers. Review internal and external complaints and carry out appropriate compliance checks. Collate and analyse quality and compliance data against defined parameters. Proactively identify potential problems and recommend commercially viable solutions. Undertake other duties and projects as required. About You You will ideally have: Excellent planning, organisational and time-management skills, preferably gained within a fast-paced commercial environment. The ability to respond quickly and effectively to changing requirements and priorities. A technical background in mechanical engineering, electrical/electronic engineering or softlines. Experience within retail, manufacturing or factory quality control. Experience with risk assessment processes. Strong knowledge of product groups and manufacturing processes. Experience working with product specifications, technical drawings and component-level problem solving. Strong analytical, lateral-thinking and problem-solving skills. Excellent written and verbal communication skills. Strong attention to detail and a methodical approach to work. Good IT skills, including experience with Microsoft Office. Knowledge or experience of 8D, Six Sigma and other quality improvement tools. What We Offer Competitive salary Pension scheme Long-service awards Employee discount Cycle-to-work scheme If you are currently seeking a new challenge and feel you would be a good fit, then please submit an up to date CV by using the apply button below. For an informal chat please call TQR Plymouth and ask for Laura, many thanks for your interest. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service. TPBN1_UKTJ

Metrology Technician Location: Plymouth Make sure to apply with all the requested information, as laid out in the job overview below. Salary: £28,000 - £30,000 per annum + 20% shift premium Shifts: Full-time, site-based, alternating shift pattern About the RoleWe are recruiting for a Metrology Technician to join a leading advanced manufacturing and engineering business based in Plymouth. This is an excellent opportunity to join a company known for its commitment to quality, precision engineering, and continuous improvement. Working within a quality-focused manufacturing environment, you will be responsible for carrying out accurate measurement, calibration, and inspection activities, while supporting quality assurance processes, production requirements, and customer acceptance activities. Key Responsibilities Perform accurate measurement and inspection of components, castings, and forgings using manual instruments, CMM equipment, and 3D scanning technology. Generate measurement reports and maintain traceability of samples, inspection records, and quality documentation. Conduct material integrity testing including ultrasonic inspection and hardness testing using Rockwell, Brinell, Vickers, and Leeb methods. Calibrate, maintain, and manage gauges and measuring equipment, liaising with external calibration providers when required. Provide support for quality assurance activities and cover Customer Acceptance Line (CAL) duties during periods of absence, holiday, or increased workload._About You Essential: Previous experience in metrology, quality inspection, calibration, or a similar engineering environment. Experience using precision measuring equipment, gauges, and inspection tools. Ability to accurately interpret engineering drawings, specifications, and quality standards. Good attention to detail with strong organisational and record-keeping skills. Desirable: Experience with CMM programming, Opticline systems, or 3D scanning equipment. Knowledge of ultrasonic testing, hardness testing, or metallurgical preparation techniques. Experience working within aerospace, automotive, defence, or other precision engineering sectors. What's in it for You? Competitive salary of £28,000 - £30,000 per annum. Additional 20% shift premium. Opportunity to work with advanced metrology and inspection technology. Join a well-established engineering business with opportunities for development and progression. xrnqpay _ Interested? Contact Chris Henry on (phone number removed) or email (url removed) to find out more or apply today

Were seeking an experienced and enthusiastic Lead Metrology Engineer to become our technical authority in dimensional measurement. This is an excellent opportunity for a hands-on professional who enjoys solving complex measurement challenges while taking the lead in developing and advancing metrology capability across the business. All potential candidates should read through the following details of this job with care before making an application. Working closely with Engineering, Manufacturing and Quality teams, youll develop effective measurement strategies, support new product introduction and drive continuous improvement across our metrology processes. Youll also have the opportunity to mentor colleagues, introduce innovative measurement technologies and help establish consistent best practice throughout the organisation. If youre passionate about precision measurement, enjoy exploring new technologies and want to make a tangible contribution to manufacturing excellence, wed be keen to hear from you. Key Role Responsibilities will include: Lead the development, standardisation and continuous improvement of metrology processes across the business. Develop inspection methods, measurement strategies, fixturing solutions and work instructions to improve quality and efficiency. Remain hands-on with dimensional inspection activities, supporting production and engineering with complex measurement requirements. Work alongside Manufacturing Engineers during new product introduction to validate machining processes and provide measurement expertise. Programme and optimise CMM routines to improve repeatability, efficiency and inspection capability. Research, evaluate and introduce new metrology technologies, equipment and industry best practice. Provide technical guidance and mentoring to the metrology team, promoting consistent working methods and continuous development. Support Measurement System Analysis (MSA) activities including Gauge R&R, bias and linearity studies. Prepare and support dimensional documentation for FAIR and PPAP submissions. Ensure all measurement activities meet customer, regulatory and internal quality requirements. Promote continuous improvement initiatives across the department. Essential Knowledge, Experience and Candidate Attributes required: Degree educated in a STEM discipline. In the absence of this qualification, relevant practical engineering experience may also be considered. Minimum of 5 years' experience within dimensional inspection of precision engineered components. Strong experience using both Coordinate Measuring Machines (CMM) and conventional measurement equipment. Proven CMM programming experience, ideally using Zeiss Calypso software. Excellent understanding of Geometric Dimensioning & Tolerancing (GD&T). Knowledge of dimensional measurement standards, PPAP requirements and Measurement System Analysis (MSA). A proactive approach with excellent problem-solving skills and the ability to work effectively under changing priorities. Passionate about continuous improvement and developing standardised ways of working. Excellent communication skills with the ability to coach and influence colleagues across multiple departments. Whats on Offer: Competitive Salary. Career Development Pathways and Investment in Professional Development. 25 days holiday + 8 days bank holiday. Engagement and Rewards platform with access to discounts at over 100 retailers. Free on site parking with electric charging points available. Subsidised canteen. The successful candidate will be required to work Monday to Friday 08:15 to 16:15 Please note, our client does not have a Skilled Worker Sponsorship Licence therefore to apply for this role, it is essential that candidates have the immediate right to work in the UK. If you have the qualifications and experience listed above, please submit an up to date CV by using the apply button below. xrnqpay By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service.

Job Description LGV Fitter Please double check you have the right level of experience and qualifications by reading the full overview of this opportunity below. Plympton Permanent, full-time Competitive salary + Company Van + Benefits As a Vehicle Technician, you will be responsible for servicing, maintaining and repairing a range of commercial vehicles, ensuring they remain safe, compliant and operational at all times. You will use modern diagnostic equipment to identify faults, carry out repairs efficiently, and maintain accurate records of all work completed. You will work on a fleet comprised of:Light Commercial Vehicles,Peugeot Boxers andFord Transit Vans. More about the role: Carry out routine servicing, maintenance and repairs on commercial vehicles. Diagnose mechanical and electrical faults using diagnostic equipment, including Texa and Bosch systems. Conduct vehicle inspections and identify repair requirements. Complete all work in line with manufacturer guidelines and company standards. Maintain accurate service records, inspection reports and job documentation. Ensure vehicles meet all safety and compliance requirements. Support workshop efficiency by working independently and collaboratively with colleagues. Qualifications About you: ? NVQ Level 3 in Vehicle Maintenance and Repair or equivalent ? Full UK Driving Licence ? Minimum of 5 years' experience in a similar Vehicle Technician role ? Experience servicing and repairing light commercial vehicles ? Strong diagnostic and fault-finding experience using Texa and/or Bosch systems ? Experience working with Ford and Peugeot vehicles ? Competent IT skills ? Confident using tablets, mobile devices and computer systems to complete job cards, service records, inspection reports and workshop paperwork accurately ? Strong attention to detail and commitment to delivering high-quality workmanship Additional Information What we can offer you: Enhanced maternity,paternity and adoption pay and leave Company pension Life assurance scheme (x4 salary) Medicare Cash Plan (includes cash payments towards dental, medical, therapeutic treatments) with the option to add up to 4 dependants Refer a friend scheme Employee assistance programme (access to GP appointments and mental health support) Competitive annual leave plus bank holidays Training and career progression opportunities Company van Adler and Allan are committed to fostering diversity and inclusion in our workplace. We proudly embrace equal opportunities for all applicants, regardless of race, colour, religion, sex, sexual orientation, gender identity or national origin. xrnqpay If you require any support with your application, whatever the circumstance, please let us know.

Company Description About Infrastructure SOCOTECs Infrastructure team delivers essential technical services that ensure the safety, quality and compliance of major construction and civil engineering projects across the UK. We provide independent construction materials testing to verify strength, durability and performance of key materials; foundations and pile testing to confirm ground stability; specialist structures and pavements assessment and analysis; and integrated geotechnical and structural monitoring that delivers real time data throughout project lifecycles. Our experts use industry leading methods and advanced technology to support infrastructure projects from initial site investigation through construction and long term performance, helping clients manage risk, meet regulatory standards and build safer, more resilient assets. What's in it for you? Your expertise deserves recognition. Alongside a competitive salary, we offer a comprehensive benefits package including 25 days holiday (with the option to buy more), an electric car scheme (where applicable), employee recognition programmes, family-friendly support, exclusive retail discounts, employee assistance programmes, and an enhanced company pension. SOCOTEC UK & Ireland are proud to be Disability Confident accredited. Job Description Field Technician Are you interested working within the construction materials testing sector on one of the largest infrastructure projects (Sizewell C)? This could be your opportunity to excel as a Field Technician, playing a vital role in supporting SOCOTECs continued success. As SOCOTEC grows, so do our teams. Were looking for a dedicated Field Technician to join our Infrastructure division and wear the SOCOTEC badge with pride. We are seeking a proactive, reliable, and flexible Field Technician to join our Infrastructure team. In this role, youll need the confidence to undertake sampling and testing of materials onsite and in our site-based laboratory facility while maintaining high health & safety and quality standards. Previous site-based experience is beneficial to thrive in this position. The tasks you will undertake will include (but are not limited to): Sampling and testing of construction materials on the Sizewell C project Liaising with clients and subcontractors on site Maintaining calibrated equipment and accurate site records Qualifications To be a successful Field Technician, you should be able to demonstrate: Minimum 1 year industry experience preferred Full UK driving licence Flexible approach to working hours including nights and weekends Have completed the vetting and are authorised to access the Sizewell C project would be advantageous Additional Information Why SOCOTEC? Join a thriving community of over 2,000 industry professionals who are passionate about making a real difference. At SOCOTEC UK, we're not just delivering services - we're shaping the future of testing, inspection, and certification across the nation. What sets us apart? Our people. We've built our reputation on attracting exceptional talent like you and empowering them to deliver excellence at every turn. Our comprehensive range of TIC services means you'll have the opportunity to work on diverse, challenging projects that truly matter. In this role, you won't just be another employee - you'll be a key player in our continued success story. Your expertise will directly contribute to our mission of building a safer, more sustainable world, while you grow your career alongside some of the industry's finest professionals. Your Career, Your Way Build a traditional career path or explore opportunities across multiple disciplines - all within SOCOTEC. Your choice, your direction. Work Your Way Local, national, or global projects. Office-based, remote, or hybrid. We offer the flexibility that empowers you to perform at your best. Committed to Your Growth From day one, you'll have access to comprehensive training, mentorship, and development programs. We support every step of your professional journey. #YouGrowWeGrow Think you've got what it takes to add value to our success? We would love to hear from you and look forward to receiving your application. Building a safer and more sustainable world is the core mission we set out to achieve at SOCOTEC, it is at the heart of everything that we do. We are committed to acting as a key player in society, investing in innovative solutions to ensure social and environmental concerns are at the forefront of all of our business operations. JBRP1_UKTJ

To deliver the MoD's submarine and warship programmes, a significant programme of infrastructure investment is required on the Devonport site. The ‘Major Infrastructure Projects' (MIP) Business Unit has been established to support this. One of the key scope elements within MIP is establishing a defuel capability for out of service submarines, which is delivered under the programme banner of 14 Dock Readiness. This work comprises of several interrelated projects to develop various multi-disciplinary infrastructure systems, with an overall value more than £100m. The Submarine Defuel Delivery Project (SDDP) sits within the Dock Readiness programme. SDDP provides the Reactor Access House (RAH) which supplies the necessary tools and systems to defuel submarine. This role is part of that Engineering Team that is delivering the design and implementation of the RAH and its associated tools and systems The primary purpose of the role is to ultimately assist and support the Design Manager in the delivery of project scope. This will include the likes of the following: • To undertake the delivery of EC&I activities to the required scope, quality, schedule and cost., • Responsible for technical aspects of the EC&I work packages, specifically updating documentation and drawings from detailed design to as-built status., • Undertake inspection and surveys of EC&I systems to ensure compliance with manufacturing drawings and the reference design., • Ensuring effective Quality Management Arrangements, operate and deliver through compliance with Babcock's Business Management System and Technical Manual., • Support ensuring that the processes and activities being undertaken are appropriately documented with appropriate records maintained and configuration and quality controls applied., • Support ensuring that staff and contractors are familiar with the hazards and risks associated with the work undertaken by the delegated engineering team through effective management and communication of the Risk Assessment. The candidate must: • Experience of designing EC&I systems, preferably in a nuclear context., • As-built experience, including surveys and as-built drawings., • Be able to demonstrate relevant knowledge and skills required in technical design development., • Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements., • Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage tasks in accordance with these procedures., • Working knowledge of relevant engineering computer applications. The candidate will have a degree or equivalent in a EC&I Engineering related discipline. Preferably working towards Chartered Engineer status and member of relevant institute. A range of Babcock specific courses will be required, such as the following: • Site Induction, • Fire Safety, • Diversity, • Anti-bribery, • Data Protection JBRP1_UKTJ

If you are looking to work for a growing business who truly value and care for their employees, then look no further! Mechanical Supervisor - Pipework & Mechanical Services Location Devonport Royal Dockyard, Plymouth Role Overview We are seeking an experienced Mechanical Supervisor to oversee the delivery of mechanical pipework and associated mechanical services within Devonport Royal Dockyard. The role will be responsible for the day-to-day supervision and coordination of mechanical works, including pipefitting, pipework installation, containment, freshwater systems, general service pipework and pipework removals. The successful candidate will provide clear direction to mechanical trades and subcontractors, ensuring works are delivered safely, efficiently, to programme and in accordance with approved drawings, specifications, RAMS and quality requirements. The role requires a strong practical mechanical background, excellent organisational skills and the ability to manage works within a live, controlled, and operational dockyard environment. Key Responsibilities Supervise and coordinate day-to-day mechanical installation activities. Manage mechanical craft personnel, including Senior Mechanical Craftsperson's, Mechanical Craftsperson's and apprentices. Plan and allocate daily work activities in accordance with the project programme and priorities. Oversee the installation, modification, maintenance and removal of mechanical pipework and containment. Supervise works involving carbon steel, ductile iron, concrete-lined pipework, and stainless steel. Oversee installation and modification of freshwater, domestic water, and general service pipework systems. Coordinate pipework diversions, alterations, extensions, tie-ins, and connections to existing systems. Supervise general pipework removals, including redundant and decommissioned services. Ensure appropriate isolation, draining, preparation and making-safe arrangements are in place prior to works commencing. Supervise installation of valves, flanges, fittings, strainers, drains, vents, supports and associated mechanical components. Coordinate installation of mechanical containment, pipe supports, brackets, pipe racks and associated support steelwork. Review drawings, specifications, isometrics, and site instructions to ensure the workforce understands the required installation. Undertake site surveys, measurements and setting-out activities where required. Identify clashes, access issues and other constructability concerns and raise these with the Project Manager/Engineer. Coordinate mechanical works with electrical, civil, structural, and other site activities. Liaise with the client, site management, engineering teams, and other contractors as required. Monitor progress against the programme and provide regular updates to the Project Manager. Identify potential delays, resource requirements and constraints and take appropriate action. Ensure sufficient labour, materials, tools, plant, and access arrangements are available to deliver the planned works. Supervise pressure testing, leak testing, flushing, and commissioning activities. Ensure inspection and testing requirements are completed and recorded. Ensure all works comply with approved RAMS, permits, drawings, specifications, ITPs, and quality requirements. Conduct regular site inspections to monitor workmanship and compliance. Promote a strong safety culture and ensure all personnel understand and comply with site rules and procedures. Lead toolbox talks, pre-start briefings and task-specific discussions as required. Monitor housekeeping and ensure work areas are maintained in a safe and orderly condition. Support incident investigations and report safety, quality, or environmental issues promptly. Verify completed works and support the preparation of handover documentation. Provide technical and practical guidance to mechanical craft personnel and apprentices. Ensure plant, tools and equipment are suitable, inspected and used correctly.Skills & Experience Significant experience in mechanical pipework installation and supervision. Strong practical background in mechanical pipefitting and industrial pipework. Proven experience working with carbon steel, ductile iron, concrete-lined pipework, and stainless steel. Experience with freshwater, domestic water, and general service pipework systems. Experience supervising pipework installations, modifications, diversions, and removals. Strong understanding of pipework supports, containment, valves, fittings and associated mechanical services. Ability to read and interpret mechanical drawings, isometrics, specifications, and installation details. Experience coordinating multiple trades within a complex operational environment. Good understanding of construction planning, sequencing, and programme delivery. Strong awareness of health, safety, quality, and environmental requirements. Previous experience within Defence, Dockyard, Marine, Industrial or Nuclear environments would be highly advantageous. Excellent communication and leadership skills. Ability to manage competing priorities and make practical decisions on site.Qualifications & Requirements Recognised mechanical engineering/pipefitting apprenticeship or equivalent trade experience. Relevant mechanical trade qualification. Proven experience in a mechanical supervisory role. Appropriate site safety qualifications. SMSTS or equivalent supervisory safety qualification preferred. Ability to obtain and maintain the required Devonport Dockyard security clearance/access. Relevant additional qualifications such as confined space, hot works, lifting/rigging, temporary works or MEWP would be advantageous.Key Competencies The successful candidate will demonstrate: Leadership - providing clear direction and support to the mechanical workforce. Safety - maintaining high standards of safety and ensuring compliance with RAMS and site procedures. Technical competence - understanding mechanical pipework installation and associated systems. Planning & organisation - effectively managing labour, materials, plant and daily activities. Quality - ensuring installations meet drawings, specifications and required standards. Communication - working effectively with the workforce, management, engineering teams, client and other contractors. Problem solving - identifying site issues and developing practical solutions. Programme awareness - proactively managing activities to support successful project delivery.Role Objective The Mechanical Supervisor will be responsible for ensuring that mechanical works are planned, coordinated, supervised and delivered safely, efficiently and to the required quality, while maintaining the programme and supporting the successful completion and handover of the works within Devonport Royal Dockyard. #CVL Whether you are looking for progression in your new role or for your forever job, we will happily welcome your application. Equal Opportunities Aureosare an equal opportunities employer, and we are determined to ensure that no applicant or employee receives less favourable treatment on the grounds of gender, age, disability, religion, belief, sexual orientation, marital status or race, or is disadvantaged by conditions or requirements which cannot be shown to be justifiable

Working for a world-renowned manufacturer, pushing the boundaries of innovation and precision engineering for over 75 years. My client is committed to nurturing talent and professional growth. My client fosters a culture of innovation, collaboration and excellence, continually investing in the latest technologies to support our customers across the aerospace and precision engineering sectors. Job Description We're looking for an experienced and passionate Lead Metrology Engineer to become the technical expert in dimensional measurement. This is an exciting opportunity for someone who enjoys remaining hands-on while leading the development of measurement capability across the business. You'll work closely with Engineering, Manufacturing and Quality teams to develop robust measurement strategies, support new product introduction and drive continuous improvement across our metrology processes. You'll also play a key role in mentoring colleagues, introducing new technologies and helping to standardise best practice throughout the organisation. If you're someone who enjoys solving complex measurement challenges, embracing new technology and making a real impact on manufacturing excellence, we'd love to hear from you. Key Responsibilities • Lead the development, standardisation and continuous improvement of metrology processes across the business., • Develop inspection methods, measurement strategies, fixturing solutions and work instructions to improve quality and efficiency., • Remain hands-on with dimensional inspection activities, supporting production and engineering with complex measurement requirements., • Work alongside Manufacturing Engineers during new product introduction to validate machining processes and provide measurement expertise., • Programme and optimise CMM routines to improve repeatability, efficiency and inspection capability., • Research, evaluate and introduce new metrology technologies, equipment and industry best practice., • Provide technical guidance and mentoring to the metrology team, promoting consistent working methods and continuous development., • Support Measurement System Analysis (MSA) activities including Gauge R&R, bias and linearity studies., • Prepare and support dimensional documentation for FAIR and PPAP submissions., • Ensure all measurement activities meet customer, regulatory and internal quality requirements., • Promote continuous improvement initiatives across the department. Candidate Requirements • Degree qualified in a STEM discipline or equivalent practical engineering experience., • Minimum of 5 years' experience within dimensional inspection of precision engineered components., • Strong experience using both Coordinate Measuring Machines (CMM) and conventional measurement equipment., • Proven CMM programming experience, ideally using Zeiss Calypso software., • Excellent understanding of Geometric Dimensioning & Tolerancing (GD&T)., • Knowledge of dimensional measurement standards, PPAP requirements and Measurement System Analysis (MSA)., • A proactive approach with excellent problem-solving skills and the ability to work effectively under changing priorities., • Passionate about continuous improvement and developing standardised ways of working., • Strong communication skills with the ability to coach and influence colleagues across multiple departments., • Desirable, • Experience within aerospace or precision engineering manufacture., • Knowledge of turning, grinding design., • Experience using 3D CAD software, ideally SolidWorks. We look at candidates at all experienced levels. If you are looking to relocate, we are able to support financially with this for the right candidate

To deliver the MoD’s submarine and warship programmes, a significant programme of infrastructure investment is required on the Devonport site. The ‘Major Infrastructure Projects’ (MIP) Business Unit has been established to support this. One of the key scope elements within MIP is establishing a defuel capability for out of service submarines, which is delivered under the programme banner of 14 Dock Readiness. This work comprises of several interrelated projects to develop various multi-disciplinary infrastructure systems, with an overall value more than £100m. The Submarine Defuel Delivery Project (SDDP) sits within the Dock Readiness programme. SDDP provides the Reactor Access House (RAH) which supplies the necessary tools and systems to defuel submarine. This role is part of that Engineering Team that is delivering the design and implementation of the RAH and its associated tools and systems The primary purpose of the role is to ultimately assist and support the Design Manager in the delivery of project scope. This will include the likes of the following: • To undertake the delivery of EC&I activities to the required scope, quality, schedule and cost. • Responsible for technical aspects of the EC&I work packages, specifically updating documentation and drawings from detailed design to as-built status. • Undertake inspection and surveys of EC&I systems to ensure compliance with manufacturing drawings and the reference design. • Ensuring effective Quality Management Arrangements, operate and deliver through compliance with Babcock’s Business Management System and Technical Manual. • Support ensuring that the processes and activities being undertaken are appropriately documented with appropriate records maintained and configuration and quality controls applied. • Support ensuring that staff and contractors are familiar with the hazards and risks associated with the work undertaken by the delegated engineering team through effective management and communication of the Risk Assessment. The candidate must: • Experience of designing EC&I systems, preferably in a nuclear context. • As-built experience, including surveys and as-built drawings. • Be able to demonstrate relevant knowledge and skills required in technical design development. • Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements. • Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage tasks in accordance with these procedures. • Working knowledge of relevant engineering computer applications. The candidate will have a degree or equivalent in a EC&I Engineering related discipline. Preferably working towards Chartered Engineer status and member of relevant institute. A range of Babcock specific courses will be required, such as the following: • Site Induction • Fire Safety • Diversity • Anti-bribery • Data Protection

Metrology Technician Location: Plymouth Salary: £28,000 - £30,000 per annum + 20% shift premium Shifts: Full-time, site-based, alternating shift pattern About the RoleWe are recruiting for a Metrology Technician to join a leading advanced manufacturing and engineering business based in Plymouth. This is an excellent opportunity to join a company known for its commitment to quality, precision engineering, and continuous improvement. Working within a quality-focused manufacturing environment, you will be responsible for carrying out accurate measurement, calibration, and inspection activities, while supporting quality assurance processes, production requirements, and customer acceptance activities. Key Responsibilities Perform accurate measurement and inspection of components, castings, and forgings using manual instruments, CMM equipment, and 3D scanning technology. Generate measurement reports and maintain traceability of samples, inspection records, and quality documentation. Conduct material integrity testing including ultrasonic inspection and hardness testing using Rockwell, Brinell, Vickers, and Leeb methods. Calibrate, maintain, and manage gauges and measuring equipment, liaising with external calibration providers when required. Provide support for quality assurance activities and cover Customer Acceptance Line (CAL) duties during periods of absence, holiday, or increased workload._About You Essential: Previous experience in metrology, quality inspection, calibration, or a similar engineering environment. Experience using precision measuring equipment, gauges, and inspection tools. Ability to accurately interpret engineering drawings, specifications, and quality standards. Good attention to detail with strong organisational and record-keeping skills. Desirable: Experience with CMM programming, Opticline systems, or 3D scanning equipment. Knowledge of ultrasonic testing, hardness testing, or metallurgical preparation techniques. Experience working within aerospace, automotive, defence, or other precision engineering sectors. What's in it for You? Competitive salary of £28,000 - £30,000 per annum. Additional 20% shift premium. Opportunity to work with advanced metrology and inspection technology. Join a well-established engineering business with opportunities for development and progression. _ Interested? Contact Chris Henry on (phone number removed) or email (url removed) to find out more or apply today

The Opportunity We are seeking an experienced Project Engineer to support the successful delivery of complex heavy marine civil engineering projects. You will take technical ownership of site engineering activities across works such as quay walls, jetties, ports, coastal structures, piling, reinforced concrete, cofferdams and heavy temporary works. Working closely with the Project Manager, site teams, designers and specialist subcontractors, you will ensure that construction is delivered safely, accurately and in accordance with programme and specification. Key Responsibilities • Manage and mentor the engineering team for marine and heavy civil works., • Interpret drawings, specifications and design information, resolving technical issues before they affect construction., • Prepare and review method statements, risk assessments, inspection and test plans, permits and temporary-works documentation., • Coordinate piling, reinforced concrete, earthworks, drainage, marine structures and associated subcontract packages., • Manage quality assurance records, including check sheets, test results, as-built surveys and handover documentation., • Monitor progress against programme and provide accurate engineering and productivity updates., • Raise and manage RFIs, technical queries, non-conformance reports and design changes., • Check subcontractor works and ensure compliance with approved designs, tolerances and specifications., • Support procurement by reviewing quantities, materials, technical submissions and lead times., • Work closely with marine operations, lifting teams and temporary-works personnel., • Champion health, safety and environmental performance throughout delivery. About You You will have: • A degree, HNC/HND or equivalent qualification in Civil Engineering or a related discipline., • Significant site engineering experience within heavy civil engineering, preferably on marine or coastal projects., • Experience with relevant works such as piling, quay walls, jetties, cofferdams, reinforced concrete, retaining structures or heavy temporary works., • A sound understanding of construction tolerances, quality assurance and temporary-works procedures., • The ability to read and interrogate complex engineering drawings and specifications., • Strong planning, problem-solving, leadership and communication skills., • A valid CSCS card and appropriate site-management or safety certification., • Flexibility to work around marine operations, tides and project requirements. Experience with AutoCAD, Civil 3D, BIM, marine plant, NEC contracts or engineering projects in operational ports would be advantageous. What We Offer • The opportunity to work on technically challenging, high-profile marine infrastructure., • A competitive salary or contract rate with an attractive benefits package., • Career development supported by experienced civil and marine engineering professionals., • Exposure to major piling, concrete, temporary-works and marine construction packages., • A collaborative environment in which engineering judgement and practical problem-solving are valued., • [Accommodation/travel allowance/company vehicle/pension/healthcare, where applicable.] Apply Submit your CV with a brief summary of your experience delivering heavy civil, marine, coastal, port or structural engineering works. We welcome applications from capable engineers who may not meet every listed requirement but can demonstrate strong transferable heavy-civil experience and the ability to succeed in a demanding marine construction environment

Chartered Valuation Surveyor The Opportunity An established independent commercial property consultancy is looking to strengthen its Plymouth office following continued demand for its valuation services across the South West. With a well-established presence throughout Devon and Cornwall, the practice has developed a loyal client base by combining technical expertise with a personal, relationship-focused service. A healthy pipeline of instructions now creates an opportunity for an experienced Chartered Valuation Surveyor to become part of its professional team. This is a chance to join a respected regional practice offering varied instructions, established clients and greater autonomy without the structure of a large corporate consultancy. The Role As a Chartered Valuation Surveyor, you’ll manage a diverse portfolio of RICS Red Book-compliant valuation instructions, predominantly across Devon, alongside work throughout Cornwall and occasional assignments in Somerset and Dorset. Your valuation work will cover: Commercial property Residential assets Development land Instructions will include valuations for: Loan security purposes Pension funds Private clients Statutory requirements You’ll take responsibility for your own workload, deal directly with clients and produce high-quality valuation reports while benefiting from the support and resources of an experienced regional team. About You We’re looking for an established valuation professional who can confidently manage instructions from initial client contact through to inspection, analysis and final reporting. For this Chartered Valuation Surveyor position, you’ll need: MRICS or FRICS status RICS Registered Valuer accreditation At least 3 years’ post-qualified valuation experience Strong experience producing RICS Red Book-compliant reports Excellent communication and client-facing skills The ability to manage your own workload effectively A full UK driving licence What’s In It For You? Competitive salary plus commission An established regional client base A varied portfolio of valuation instructions Autonomy over your workload A supportive and experienced professional team Genuine work-life balance The opportunity to help develop and grow the valuation service Long-term career stability with a respected independent consultancy Regional work without the corporate environment of a national practice If you’re a Chartered Valuation Surveyor looking for more control over your workload, greater variety and the opportunity to work with an established client base in a collaborative independent practice, apply today for a confidential discussion

Lead Site Manager – Cladding & Retrofit | Plymouth City Centre | £2m Project Location: Plymouth city centre Salary: £45,000–£55,000 + car allowance/company van Contract type: Permanent | Project duration: 12 months (start to finish) The Company A friendly, client-focused, and growing privately owned main contractor across the South West is looking for an experienced Lead Site Manager to oversee a £2m cladding and retrofit project to private apartments in the heart of Plymouth. With an expanding project pipeline across the region, this is a great opportunity to join a business at an exciting stage of growth. The Role As Lead Site Manager, you will take full responsibility for the day-to-day running of the site, reporting to a visiting Contracts Manager. You'll oversee the project from start to finish over its 12-month duration, working largely autonomously on site while being supported by regular contracts manager visits. This is a logistically challenging city-centre scheme involving occupied private apartments, so strong client and public-facing skills are essential alongside technical site management ability. Key responsibilities include: • Managing all on-site operations from mobilisation through to practical completion, • Overseeing cladding and retrofit works to occupied residential apartments, • Managing site logistics in a constrained city-centre environment, including access, deliveries, and public interface, • Acting as the key point of contact for residents, clients, and stakeholders, handling queries and concerns professionally and proactively, • Coordinating subcontractors and trades to maintain programme and quality, • Ensuring compliance with health & safety, quality, and building regulations, including relevant cladding/fire safety standards, • Chairing site and progress meetings with the client and design team, • Reporting progress, issues, and programme updates to the visiting Contracts Manager, • Managing site records, RAMS, and progress reporting About You • Proven experience as a Site Manager or Lead Site Manager, ideally on cladding, retrofit, or refurbishment projects, • Experience working on occupied residential buildings, with strong public and client-facing skills, • Comfortable managing logistically challenging city-centre sites, working autonomously day-to-day, • Valid CSCS card and First Aid certification essential, • SMSTS essential; scaffold inspection qualification a plus, • Strong leadership, communication, and problem-solving skills, • Must live within an easy daily commute of Plymouth, • Full UK driving licence What's on Offer • £45,000–£55,000 per annum, dependent on experience, • Car allowance or company van, • Private medical insurance, • Life insurance, • Contributed pension, • Income protection, • 25 days holiday plus bank holidays, • Genuine opportunity to work for a friendly, client-focused, and growing main contractor with further pipeline across the South West How to Apply To apply or find out more, please contact Martin Randall at JHR Recruitment with an up-to-date CV or apply to the role below

We’re seeking an experienced and enthusiastic Lead Metrology Engineer to become our technical authority in dimensional measurement. This is an excellent opportunity for a hands-on professional who enjoys solving complex measurement challenges while taking the lead in developing and advancing metrology capability across the business. Working closely with Engineering, Manufacturing and Quality teams, you’ll develop effective measurement strategies, support new product introduction and drive continuous improvement across our metrology processes. You’ll also have the opportunity to mentor colleagues, introduce innovative measurement technologies and help establish consistent best practice throughout the organisation. If you’re passionate about precision measurement, enjoy exploring new technologies and want to make a tangible contribution to manufacturing excellence, we’d be keen to hear from you. Key Role Responsibilities will include: • Lead the development, standardisation and continuous improvement of metrology processes across the business., • Develop inspection methods, measurement strategies, fixturing solutions and work instructions to improve quality and efficiency., • Remain hands-on with dimensional inspection activities, supporting production and engineering with complex measurement requirements., • Work alongside Manufacturing Engineers during new product introduction to validate machining processes and provide measurement expertise., • Programme and optimise CMM routines to improve repeatability, efficiency and inspection capability., • Research, evaluate and introduce new metrology technologies, equipment and industry best practice., • Provide technical guidance and mentoring to the metrology team, promoting consistent working methods and continuous development., • Support Measurement System Analysis (MSA) activities including Gauge R&R, bias and linearity studies., • Prepare and support dimensional documentation for FAIR and PPAP submissions., • Ensure all measurement activities meet customer, regulatory and internal quality requirements., • Promote continuous improvement initiatives across the department. Essential Knowledge, Experience and Candidate Attributes required: • Degree educated in a STEM discipline. In the absence of this qualification, relevant practical engineering experience may also be considered., • Minimum of 5 years' experience within dimensional inspection of precision engineered components., • Strong experience using both Coordinate Measuring Machines (CMM) and conventional measurement equipment., • Proven CMM programming experience, ideally using Zeiss Calypso software., • Excellent understanding of Geometric Dimensioning & Tolerancing (GD&T)., • Knowledge of dimensional measurement standards, PPAP requirements and Measurement System Analysis (MSA)., • A proactive approach with excellent problem-solving skills and the ability to work effectively under changing priorities., • Passionate about continuous improvement and developing standardised ways of working., • Excellent communication skills with the ability to coach and influence colleagues across multiple departments. What’s on Offer: • Competitive Salary., • Career Development Pathways and Investment in Professional Development., • 25 days holiday + 8 days bank holiday., • Engagement and Rewards platform with access to discounts at over 100 retailers., • Free on site parking with electric charging points available., • Subsidised canteen. The successful candidate will be required to work Monday to Friday 08:15 to 16:15 Please note, our client does not have a Skilled Worker Sponsorship Licence therefore to apply for this role, it is essential that candidates have the immediate right to work in the UK. If you have the qualifications and experience listed above, please submit an up to date CV by using the ‘apply’ button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service

Site Engineer – Geotechnical & Heavy Civil Engineering Location: Plymouth, Devon Rate/Salary: £300 - £400 per day Inside IR35 (plus Lodge if over 50 miles away) Security Requirement: BPSS Clearance Eligibility Required We are recruiting for an experienced Site Engineer to join a major infrastructure project delivering complex geotechnical and heavy civil engineering works within a highly regulated environment. This role offers the opportunity to work on challenging engineering packages including earthworks, deep excavations, ground improvement, piling, reinforced concrete structures, retaining systems and associated geotechnical works, supporting the safe and successful delivery of a nationally significant project. The Role Reporting to the Senior Engineer, you will play a key role in ensuring works are delivered safely, accurately and in accordance with design and quality requirements. Responsibilities will include: Setting out and surveying for geotechnical and civil engineering works. Establishing and maintaining dimensional control across earthworks, piling and structural packages. Producing and maintaining accurate site records, as-built information and survey data. Monitoring works against specifications, tolerances and quality standards. Supporting the management of technical queries and engineering challenges on site. Assisting with the development and implementation of Inspection & Test Plans (ITPs). Recording and verifying workmanship, testing and materials compliance. Ensuring survey equipment is calibrated and maintained. Supporting the preparation and review of RAMS and engineering documentation. Maintaining drawing registers, site diaries and quality records. Working closely with subcontractors, supervisors and project delivery teams to ensure programme and quality requirements are achieved. About You We are keen to hear from Site Engineers who have experience working on major civil engineering or geotechnical projects and can demonstrate: Degree, HNC or HND in Civil Engineering or a related discipline. Previous experience as a Site Engineer on infrastructure, ground engineering or heavy civil engineering projects. Strong setting out and surveying skills using Leica GPS, Total Stations and digital levels. Experience working with quality management systems and technical documentation. Understanding of geotechnical construction methodologies. Ability to review drawings and specifications and communicate technical information effectively. Good organisational and problem-solving skills. Experience preparing or supporting RAMS, quality records and engineering documentation. Highly Desirable Experience Experience in one or more of the following areas would be advantageous: Geotechnical works Piling (CFA, rotary bored, sheet piling, secant piling or diaphragm walling) Ground improvement works Deep excavations and temporary works Earthworks and ground stabilisation Retaining structures Reinforced concrete construction Marine civils or heavy infrastructure Nuclear, defence or other highly regulated environments Development of ITPs and quality assurance processes Certifications (Desirable) SSSTS First Aid at Work Temporary Works Supervisor (TWS) or Temporary Works Coordinator (TWC) Working towards ICE or another relevant professional accreditation Security Requirements Due to the nature of the project, successful applicants must be eligible to obtain BPSS clearance. Candidates must have the right to work in the UK and satisfy project-specific security requirements

Join our Growing Organisation and Take Your Electrical Career to the Next Level This is an exciting time to join Plymouth Community Homes. As we continue to invest in our homes, services and people, we're looking for a Multi- Skilled Approved Electrician to be part of our growing team. If you're an experienced electrician who takes pride in delivering high-quality work and wants to continue developing your skills within a supportive and forward-thinking organisation, we'd love to hear from you. About the role Working across our diverse housing stock, you'll carry out a wide range of electrical installation, testing, inspection, repair and maintenance work, ensuring our tenants' homes remain safe, compliant, and well maintained. This is much more than a standard electrician role. You'll have the opportunity to utilise and further develop your multi-skilled capabilities while delivering high-quality repairs and improvements that have a direct impact on our customers' lives. You'll work independently, manage your own workload, and take pride in achieving first-time fixes wherever possible, providing an exceptional service to our tenants. What You'll Be Doing Carrying out electrical installations, testing, inspection and fault-finding on new and existing installations. Completing rewires, repairs, upgrades and planned maintenance works. Undertaking a variety of multi-skilled tasks as required. Diagnosing issues and delivering effective first-time solutions. Ensuring all work complies with current electrical regulations and health and safety standards. Providing a professional, customer-focused service to our tenants. Participating in the out-of-hours on-call service. What We're Looking For We're seeking someone who: Holds JIB Approved Electrician status. Has experience installing, testing, inspecting and fault-finding electrical systems. Can confidently undertake rewires, repairs and maintenance works. Possesses a broad range of multi-skilled maintenance abilities. Takes pride in delivering excellent customer service. Works effectively on their own initiative. Has a strong understanding of electrical and health and safety regulations. Is committed to high standards, continuous improvement and professional development. Why Join Plymouth Community Homes? At PCH, you're not just joining a housing association, you're becoming part of an organisation that is investing in homes, communities and people across Plymouth. With over 16,000 homes and more than 35,000 residents, we play a vital role in the city and have ambitious plans for the future. As we continue to grow, we're committed to supporting our colleagues with the tools, training and opportunities they need to develop successful and rewarding careers. Whether you're looking to broaden your technical expertise, build your multi-skilled experience, or progress your career with a respected local employer, PCH can help you achieve your goals. What we can offer you: Excellent pension scheme with generous employer contributions. 25 days annual leave, rising to 30 days, plus Bank Holidays. Holiday trading scheme. Fully equipped onsite gym and changing facilities. Three paid volunteer days each year through our Make a Difference programme. Free Employee Assistance Programme, including counselling support. Free annual flu vaccination. Cycle to Work scheme. Modern mobile devices and digital working tools. A supportive and friendly working environment. Regular social, charity and team-building events. Modern offices in Crownhill with excellent local amenities nearby. The opportunity to live and work in one of the UK's most beautiful coastal cities. Ready to Join Us? If you're an experienced Electrician looking for your next challenge and want to be part of a growing organisation where your skills are valued and your development is supported, we encourage you to apply today. For an informal discussion about this role, please contact Daren Newcombe, Electrical Manager on (phone number removed). Why wait? Apply today and start your journey with us. Applications will be reviewed and shortlisted on an ongoing basis. We are a committed Equal Opportunities employer. We welcome applications from suitably talented people from any community and background. Living and Working in Plymouth

An excellent, long term contract opportunity for a Security Cleared Resident Electrical Engineer, ideally with electrical power experience, to join a leading client based onsite, full time in Plymouth Devon. Hourly rate: £65.00, negotialbe. The purpose of the post is: Ensure the delivery of site Quality by managing, providing advice and support, and witnessing the installation and commissioning process through construction works in the submarine refit complex. Primary focus will be Electrical activity. You will be accountable to the Lead Construction Manager for day-to-day planning matters. You will assist the construction and Project team by providing advice and communicating with contractors and relevant internal stakeholders to resolve site issues/ Technical Queries during construction in line with contract timescales. You will ensure the contractor adheres to the Scope of works and Change requests. You will undertake and record inspections to ensure adherence to scope and integrated test plans. The post operates as part of the Major Infrastructure Projects Business Unit. Principal Tasks and Responsibilities: • Ensure the delivery of site Quality by managing, providing advice and support, and witnessing the installation and commissioning process through construction works in the submarine refit complex., • Participate in the problem solving for development of technical solutions to deficiencies or in the development of designs to overcome installation problems., • Be accountable to the Lead Construction Manager for day-to-day planning matters., • Assist the construction and Project team by providing advice and communicating with contractors and relevant internal stakeholders to resolve site issues/ Technical Queries during construction in line with contract timescales., • Ensure the contractor adheres to the Scope of works and Change requests., • Undertake and record inspections to ensure adherence to scope and integrated test plans., • Supervise and provide on-the-job guidance to junior staff., • Make effective use of Learn from Experience information to develop and disseminate knowledge in relation to practical engineering and to maintain a record of development to substantiate the skills achieved., • Support development, construction, installation, commissioning, operation, and maintenance of Facilities to ensure that they comply with the design intent and DNSP's for Nuclear related Works, together with all relevant Local and National Regulations and Legislation., • Support the on-site inspection of DRDL assets for their construction, maintenance, and modification, • Maintain familiarity with DRDL procedures used within Facilities Engineering. Experience and qualifications required: Academic: Ideally Degree or HND in an appropriate engineering discipline. Nuclear: Ideally equivalent nuclear and/or marine system knowledge. Local: • Design of electrical building services, to include fire detection and alarm systems, industrial lighting and emergency lighting, site broadcast (PA) and HVAC;, • Sound understanding of company and departmental procedures relating to Health and Safety, Design and quality. Experience: • The post holder must be able to demonstrate relevant knowledge and skills required in the resolution of onsite electrical issues of complex systems throughout the construction lifecycle., • Provide advice based on on-site experience to the designers to enable them to develop the design, • Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage projects in accordance with these procedures., • Working knowledge of relevant engineering office computer applications, • Ideally Experience of the design support to construction, operation, refit/repair of conventional and nuclear submarines and/or facilities Please get in touch for further details

12 Month Contract (initially) Up to £70 per hour umbrella (Inside IR35) Full time on site Job Role: Ensure the delivery of site quality by managing, providing advice and support, and witnessing the installation and commissioning process through construction works in the submarine refit complex. Primary focus will be Electrical activity. You will be accountable to the Lead Construction Manager for day-to-day planning matters. You will assist the construction and project team by providing advice and communicating with contractors and relevant internal stakeholders to resolve site issues / Technical Queries during construction in line with contract timescales. You will ensure the contractor adheres to the Scope of Works and Change Requests. You will undertake and record inspections to ensure adherence to scope and integrated test plans. The post operates as part of the Major Infrastructure Projects Business Unit. Key Responsibilities: Ensure the delivery of site Quality by managing, providing advice and support, and witnessing the installation and commissioning process through construction works in the submarine refit complex. Participate in the problem solving for development of technical solutions to deficiencies or in the development of designs to overcome installation problems. You will be accountable to the Lead Construction Manager for day-to-day planning matters. You will assist the construction and Project team by providing advice and communicating with contractors and relevant internal stakeholders to resolve site issues / Technical Queries during construction in line with contract timescales. You will ensure the contractor adheres to the Scope of works and Change requests. You will undertake and record inspections to ensure adherence to scope and integrated test plans. Supervise and provide on-the-job guidance to the junior staff. Make effective use of Learn from Experience information to develop and disseminate knowledge in relation to practical engineering and to maintain a record of development to substantiate the skills achieved. Support development, construction, installation, commissioning, operation and maintenance of Facilities to ensure that they comply with the design intent and DNSP's for Nuclear related Works, together with all relevant Local and National Regulations and Legislation. Support the on-site inspection of DRDL assets for their construction, maintenance and modification Maintain familiarity with DRDL procedures used within Facilities Engineering. Key Experience and Attributes: Ideally has electrical power experience Needs to have some (2 years+) experience in a site-based role not necessarily as a Resident Engineer. Be confined space trained or prepared to complete confined space training and entering the subways. Experience of design of electrical building services, to include fire detection and alarm systems, industrial lighting and emergency lighting, site broadcast (PA) and HVAC The post holder must be able to demonstrate relevant knowledge and skills required in the resolution of onsite electrical issues of complex systems throughout the construction lifecycle. Provide advice based on on-site experience to the designers to enable them to develop the design Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage projects in accordance with these procedures. Working knowledge of relevant engineering office computer applications Ideally experience of the design support to construction, operation, refit/repair of conventional and nuclear submarines and/or facilities

Metrology Technician Plymouth £28,000 - £30,000 Alternating Shifts Yolk Recruitment are partnered with this leading high-precision manufacturing business as they continue to grow. With a strong history of secure long term contracts the business has always offered security and the opportunity to develop in a well run, world class operation, manufacturing high quality components. In this role you will be responsible for carrying out precise measurement, inspection, and calibration activities, while supporting quality standards, production requirements, and customer acceptance processes. This is what you'll be doing: Carry out precise measurement and inspection of components, castings, and forgings using manual measuring equipment, CMMs, and 3D scanning systems. Produce detailed measurement reports while ensuring full traceability of samples, inspection results, and associated quality records. Complete material integrity testing, including ultrasonic inspection and hardness testing using Rockwell, Brinell, Vickers, and Leeb methods. Maintain, calibrate, and control gauges and measuring equipment, working with external calibration providers where required. Support wider quality assurance activities and provide cover for Customer Acceptance Line (CAL) responsibilities during periods of absence or increased workload. The experience you'll need in this role: Previous experience within metrology, quality inspection, calibration, or a similar precision engineering environment. Confident using precision measurement equipment, gauges, and a range of inspection tools. Able to read and interpret engineering drawings, technical specifications, and relevant quality standards accurately. Strong attention to detail, with good organisational and documentation skills. Experience with CMM programming, Opticline systems, or 3D scanning technology would be advantageous. Knowledge of ultrasonic testing, hardness testing, or metallurgical preparation techniques would be beneficial. Previous experience within aerospace, automotive, defence, or another high-precision engineering environment is desirable. And this is what you'll get in return: Opportunity to work with advanced metrology, measurement, and inspection technologies. Join a well-established engineering business offering a professional and quality-focused working environment. Excellent opportunities for ongoing training, development, and career progression. Are you up to the challenge? If you feel you have the skills, experience and passion to be successful in this role apply now! *Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities

We are seeking a dynamic and detail-oriented Product Technologist to join our team in Plymouth. This role is responsible for supporting product quality, safety and compliance throughout the product lifecycle. Working closely with buying teams, suppliers and third-party partners, you will coordinate inspections and audits, manage technical documentation, review product specifications and ensure products comply with relevant legislation and internal standards. You will also analyse technical data and certification, support new product introduction projects, investigate product and compliance issues, and identify opportunities for continuous improvement. The successful candidate will be highly organised and analytical, with excellent communication skills and the ability to manage multiple priorities in a fast-moving commercial environment. Key Responsibilities • Coordinate pre-shipment inspections, DUPRO inspections, social compliance audits and associated documentation., • Review packaging, labels and instruction manuals to ensure information is accurate and compliant., • Prepare and maintain technical documentation and product specifications., • Ensure production methods and products comply with relevant legislation and applicable standards., • Support product introduction projects and associated technical activities., • Maintain and input product quality, safety, compliance and due diligence data., • Review and analyse testing, inspection reports and certification provided by third parties., • Work independently while managing changing priorities and tight deadlines., • Provide guidance and communicate technical information clearly to colleagues and suppliers., • Request, review and process technical information from buyers and suppliers., • Identify and implement opportunities for process and quality improvements., • Liaise directly with buying teams, suppliers, internal departments and external service providers., • Review internal and external complaints and carry out appropriate compliance checks., • Collate and analyse quality and compliance data against defined parameters., • Proactively identify potential problems and recommend commercially viable solutions., • Undertake other duties and projects as required. About You You will ideally have: • Excellent planning, organisational and time-management skills, preferably gained within a fast-paced commercial environment., • The ability to respond quickly and effectively to changing requirements and priorities., • A technical background in mechanical engineering, electrical/electronic engineering or softlines., • Experience within retail, manufacturing or factory quality control., • Experience with risk assessment processes., • Strong knowledge of product groups and manufacturing processes., • Experience working with product specifications, technical drawings and component-level problem solving., • Strong analytical, lateral-thinking and problem-solving skills., • Excellent written and verbal communication skills., • Strong attention to detail and a methodical approach to work., • Good IT skills, including experience with Microsoft Office., • Knowledge or experience of 8D, Six Sigma and other quality improvement tools. What We Offer Competitive salary Pension scheme Long-service awards Employee discount Cycle-to-work scheme If you are currently seeking a new challenge and feel you would be a good fit, then please submit an up to date CV by using the ‘apply’ button below. For an informal chat please call TQR Plymouth and ask for Laura, many thanks for your interest. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service

CNC Setter/Operator - Permanent Nights Plymouth £39,000 Yolk Recruitment are partnered with this leading high-precision manufacturing business as they continue to grow. With a strong history of secure long term contracts the business has always offered security and the opportunity to develop in a well run, world class operation, manufacturing high quality components. Whether you're an experienced CNC Machinist or at an earlier point in your career, there's opportunity for you here. The business has a range of work with varying levels of challenge, and a strong training resource with proven track record developing people to reach their potential as Machinists. You'll have the opportunity to progression and broaden your experience across different machines, develop your technical knowledge, and work with modern equipment and advanced machining techniques. This is a shift role, working permanent nights shift. You'll work Sunday night through Friday morning. Your shift starts at 10:00pm on Sunday with each shift finishing at 6:00am the following morning (5 shifts per week). Opportunities for other shift patterns available in the future. Overtime is available and the business offers a well-developed benefits package. This is what you'll be doing: Setting and/or operating CNC machines Producing components to engineering specifications Carrying out first-off inspections and in-process checks Reading and interpreting engineering drawings Using measuring equipment such as verniers, micrometers and gauges Working in line with health and safety procedures The experience you'll need in this role: Experience and/or knowledge of machining processes in a precision engineering environment Able to read engineering drawings Experience using inspection and measuring equipment Formal engineering qualification is advantageous but experience also values And this is what you'll get in return: Annual pay review 25 days + bank holidays 13% pension Life assurance Enhanced maternity/paternity leave Company sick pay policy Flexible benefits package Employee assistance program Training and development Proven progression opportunities If you're working in machining or a machine room environment and looking for long-term career prospects, this could be the ideal next step. Are you up to the challenge? If you feel you have the skills, experience and passion to be successful in this CNC Setter/Operator role apply now! *Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities

Our client is currently looking for a Mobile Commercial Vehicle Electrical/ Utility Engineer to join their highly skilled and knowledgeable Utility Engineering team. Working as part of a nationwide mobile engineering team, you will attend customer sites to carry out planned maintenance, compliance inspections, fault diagnosis, repairs and testing on a wide range of commercial vehicles and associated electrical equipment. You'll receive a fully equipped company vehicle, specialist tooling and ongoing training, allowing you to develop your technical knowledge while building a long-term career with one of the UK's leading commercial vehicle service providers. We are looking for someone who enjoys problem-solving, takes pride in delivering high-quality workmanship and can work confidently both independently and as part of a team. Experience within automotive electrical systems is advantageous, but candidates with transferable electrical experience will also be considered. Job type: Full time, Permanent Location: Mobile position Salary: £37,000 - £40,000 per annum (depending on experience) basic plus door to door paid travel on-top. Duties & Responsibilities: • Carry out routine maintenance, servicing and repairs on commercial vehicle electrical systems and associated equipment., • Diagnose and rectify electrical faults using appropriate testing equipment and diagnostic techniques., • Complete planned compliance inspections on commercial vehicles and associated electrical equipment., • Carry out electrical PAT testing in line with current regulations and company procedures., • Inspect, test and maintain DC and AC electrical systems, ensuring equipment meets the required safety and operational standards., • Read and interpret wiring diagrams, electrical schematics and technical documentation., • Deliver high-quality work within agreed timescales while following company procedures and manufacturer standards., • Ensure all work is completed safely and in accordance with Health & Safety legislation., • Maintain accurate service records and inspection documentation., • Represent the business professionally when working at customer sites, providing excellent customer service at all times., • Ensure the work area remains safe throughout each task, using the correct PPE and following safe working practices. Skills & Experience: • Previous experience working on commercial vehicle electrical systems or automotive based electrical experience is an advantage., • Good understanding of DC and AC electrical systems fitted to commercial vehicles., • Experience diagnosing and repairing electrical faults., • Ability to interpret wiring diagrams and technical drawings., • PAT Testing certification is desirable, training can be provided., • Good IT skills and the ability to complete digital job reports., • Ability to work independently, manage your own workload and meet deadlines., • Excellent problem-solving skills with strong attention to detail., • Confident communicating with customers in a professional manner., • Committed to maintaining high standards of workmanship and safety., • Full UK driving licence. What’s in it for you? • IMI accredited training available, • 31 days holiday including bank holidays, • Generous overtime opportunities, • Door-to-door paid travel time, • Fully equipped company van (tools, equipment and parts supplied) and uniform provided, • Employee Assistance Programme including private GP support We’re particularly keen to hear from engineers from backgrounds such as: Commercial Vehicle Electrician, Auto Electrician, Electrical Engineer, Tool Hire Engineer, Plant Fitter / Plant Electrician, Fleet Maintenance Electrician. If you’re practical, adaptable and looking for a role with variety and long-term career growth, we’d love to hear from you

This is an excellent opportunity for an experienced quality professional who is passionate about ensuring construction works are completed safely, compliantly, and to the highest standards. Working closely with site teams, engineers, and project managers, you'll play a key role in maintaining quality assurance processes throughout the project lifecycle. This is for 12 months FTC. Key Responsibilities Carry out site inspections to ensure works comply with project specifications, drawings, and industry standards. Complete quality checks and inspections across civil engineering and construction activities. Review and maintain Inspection Test Plans (ITPs), quality records, and supporting documentation. Monitor workmanship standards and identify any non-conformances. Support quality audits and contribute to continuous improvement initiatives. Verify that materials, equipment, and installations meet required project standards. Work collaboratively with site management, engineering, and subcontractor teams. Assist in the preparation of handover and completion documentation. Promote a positive quality culture throughout the project.About You Previous experience as a Quality Inspector, QA/QC Inspector, Quality Advisor, or similar within construction, utilities, rail, highways, or civil engineering. Good understanding of quality assurance and quality control processes within construction projects. Ability to interpret engineering drawings, specifications, and technical documentation. Strong attention to detail and excellent record-keeping skills. Confident communicator with the ability to build relationships across project teams. Must be able to pass SC clearanceDesirable Experience working on major infrastructure projects. Knowledge of ISO 9001 Quality Management Systems. CSCS Card. Previous SC clearance held What's in it for You? Competitive salary and benefits package. Opportunity to work on major construction and infrastructure projects. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

The Opportunity We are seeking an experienced Senior Site Engineer to support the successful delivery of complex heavy marine civil engineering projects. You will take technical ownership of site engineering activities across works such as quay walls, jetties, ports, coastal structures, piling, reinforced concrete, cofferdams and heavy temporary works. Working closely with the Project Manager, site teams, designers and specialist subcontractors, you will ensure that construction is delivered safely, accurately and in accordance with programme and specification. Key Responsibilities • Lead setting-out, surveying and engineering control for marine and heavy civil works., • Interpret drawings, specifications and design information, resolving technical issues before they affect construction., • Prepare and review method statements, risk assessments, inspection and test plans, permits and temporary-works documentation., • Coordinate piling, reinforced concrete, earthworks, drainage, marine structures and associated subcontract packages., • Manage quality assurance records, including check sheets, test results, as-built surveys and handover documentation., • Monitor progress against programme and provide accurate engineering and productivity updates., • Raise and manage RFIs, technical queries, non-conformance reports and design changes., • Check subcontractor works and ensure compliance with approved designs, tolerances and specifications., • Support procurement by reviewing quantities, materials, technical submissions and lead times., • Mentor junior engineers and promote consistently high engineering standards., • Work closely with marine operations, lifting teams and temporary-works personnel., • Champion health, safety and environmental performance throughout delivery. About You You will have: • A degree, HNC/HND or equivalent qualification in Civil Engineering or a related discipline., • Significant site engineering experience within heavy civil engineering, preferably on marine or coastal projects., • Strong setting-out and surveying capability using total stations, GPS and digital engineering systems., • Experience with relevant works such as piling, quay walls, jetties, cofferdams, reinforced concrete, retaining structures or heavy temporary works., • A sound understanding of construction tolerances, quality assurance and temporary-works procedures., • The ability to read and interrogate complex engineering drawings and specifications., • Strong planning, problem-solving, leadership and communication skills., • A valid CSCS card and appropriate site-management or safety certification., • Flexibility to work around marine operations, tides and project requirements. Experience with AutoCAD, Civil 3D, BIM, marine plant, NEC contracts or engineering projects in operational ports would be advantageous. What We Offer • The opportunity to work on technically challenging, high-profile marine infrastructure., • A competitive salary or contract rate with an attractive benefits package., • Career development supported by experienced civil and marine engineering professionals., • Exposure to major piling, concrete, temporary-works and marine construction packages., • A collaborative environment in which engineering judgement and practical problem-solving are valued., • [Accommodation/travel allowance/company vehicle/pension/healthcare, where applicable.] Apply Submit your CV with a brief summary of your experience delivering heavy civil, marine, coastal, port or structural engineering works. We welcome applications from capable engineers who may not meet every listed requirement but can demonstrate strong transferable heavy-civil experience and the ability to succeed in a demanding marine construction environment

If you are looking to work for a growing business who truly value and care for their employees, then look no further! Aureos have an exciting opportunity for an Electrician to join our team based in Plymouth. Our electricians are at the heart of what we do, delivering essential electrical works that keep our customers' operations running safely and efficiently. You'll work on a variety of commercial and industrial projects, supporting installation, maintenance, and testing across a diverse range of sites, ensuring that every job is completed safely, to standard, and with pride. The successful candidate will integrate into a small operational team working on a national contract at MOD sites covering Eastern England from Lincoln to Ipswich. The successful candidate must hold current training up to 18th Edition, including Inspection & Testing C&G2391, and capable of obtaining full MoD SC clearance. Tasks and duties Carry out electrical installation, maintenance, and testing in line with BS7671 and Aureos policies and procedures. Set out jobs from drawings and specifications, requisition materials, and ensure all works are completed to the highest standard. Commission and test electrical systems and issue relevant certification. Fault-find and carry out remedial works. Liaise with clients, subcontractors, and suppliers where required. Support and mentor apprentices or trainees as part of your daily role. LV electrical EICR Emergency light testing PAT testing Working at Height Managing sub-contractors to complete their specialist tasks, and various small electrical install projects.Qualifications, training and skills Individual must be reliable and time conscious with a proactive approach. Completion of a registered electrical apprenticeship or equivalent NVQ Level 3 in Electrical Installation or Maintenance (or equivalent) Achievement Measurement 2 (AM2) City & Guilds 2382-18 (18th Edition Wiring Regulations) City & Guilds 2391 (Inspection, Testing and Certification) - desirable ECS Card Full UK driving licence A strong focus on safety and quality The ability to work independently or as part of a team Excellent communication and problem-solving skills Confident in working with Office 365 software to complete worksheets and certificates. Ideally 3+ years of experienceWhat We Offer Generous Salary 25 days Holiday with the option to buy more Pension Cycle to work scheme Free parking Health & wellbeing programme Employee benefits portal. On-site parking Private medical insurance Referral Scheme#CVL Whether you are looking for progression in your new role or for your forever job, we will happily welcome your application. Equal Opportunities Aureosare an equal opportunities employer, and we are determined to ensure that no applicant or employee receives less favourable treatment on the grounds of gender, age, disability, religion, belief, sexual orientation, marital status or race, or is disadvantaged by conditions or requirements which cannot be shown to be justifiable

We are currently recruiting for an experienced Site Engineer to join a major marine infrastructure project involving significant reinforced concrete and marine construction works. This is an excellent opportunity to play a key role in the successful delivery of a high-profile infrastructure scheme. The Role As Site Engineer, you will be responsible for providing technical engineering support across the project, ensuring construction activities are delivered safely, accurately and in accordance with the programme, drawings, specifications and quality requirements. Site Engineer Responsibilities • Providing day-to-day engineering support across marine and reinforced concrete construction activities., • Setting out works accurately using Leica, Trimble or similar surveying equipment., • Undertaking surveying, levelling and dimensional control., • Reviewing construction drawings, specifications and technical documentation., • Ensuring construction works are carried out in accordance with approved drawings and specifications., • Carrying out quality inspections and ensuring works comply with project requirements., • Producing and maintaining QA documentation, Inspection & Test Plans (ITPs), inspection records and check sheets., • Maintaining accurate site records, as-built information and engineering documentation., • Monitoring reinforcement, formwork, embedded items, levels and dimensions prior to concrete placement., • Assisting with handover documentation, as-built records and project close-out., • Working closely with the wider engineering and construction team to ensure the successful delivery of the project. Site Engineer Requirements • Proven experience working as a Site Engineer on civil engineering, marine, structural or reinforced concrete projects., • Strong technical understanding of reinforced concrete construction, including reinforcement, formwork, concrete pours and structural elements., • Experience with setting out and surveying using Leica, Trimble or similar equipment., • Ability to interpret engineering drawings, specifications and construction information., • Experience producing and maintaining QA documentation, ITPs and inspection records., • Good understanding of construction methodology, quality assurance and health & safety requirements., • Valid CSCS Card essential., • SSSTS/SMSTS desirable., • Full UK Driving Licence preferred. What's on Offer • £320–£380 per day, depending on experience., • 18 month contract with potential for extension., • Immediate start available., • Opportunity to work on a major marine and reinforced concrete infrastructure project., • Long-term opportunity with a major contractor., • Excellent opportunity to gain further experience on a high-profile infrastructure scheme. Apply Now Apply today with your latest CV or get in touch for more information

We are currently recruiting for an experienced Project Engineer to join a major marine infrastructure project involving significant reinforced concrete and marine construction works. This is an excellent opportunity to play a key role in the successful delivery of a high-profile infrastructure scheme. The Role As Project Engineer, you will be responsible for providing technical and project engineering support across the scheme, ensuring construction activities are delivered safely, efficiently and in accordance with the programme, drawings, specifications and quality requirements. Project Engineer Responsibilities • Providing day-to-day project engineering support across marine and reinforced concrete construction activities., • Coordinating engineering activities between site teams, subcontractors, designers and the wider project team., • Reviewing construction drawings, specifications and technical documentation., • Ensuring construction works are carried out in accordance with approved drawings, specifications and project requirements., • Monitoring engineering progress and supporting the delivery of works in accordance with the programme., • Assisting with the preparation, review and management of technical submissions, RFIs and design information., • Producing and maintaining QA documentation, Inspection & Test Plans (ITPs), inspection records and technical documentation., • Monitoring reinforcement, formwork, embedded items, levels and dimensions prior to concrete placement., • Maintaining accurate site records, as-built information and engineering documentation., • Assisting with technical queries, design coordination and resolution of engineering issues on site., • Working closely with the wider engineering and construction team to ensure the successful delivery of the project. Project Engineer Requirements • Proven experience working as a Project Engineer on civil engineering, marine, structural or reinforced concrete projects., • Strong technical understanding of reinforced concrete construction, including reinforcement, formwork, concrete pours and structural elements., • Experience coordinating engineering activities and working closely with site, design and subcontractor teams., • Ability to interpret engineering drawings, specifications and construction information., • Experience producing and maintaining QA documentation, ITPs, inspection records and technical submissions., • Good understanding of construction methodology, project delivery, quality assurance and health & safety requirements., • Valid CSCS Card essential., • SSSTS/SMSTS desirable., • Full UK Driving Licence preferred. What's on Offer • £380–£480 per day, depending on experience., • 18 month contract with potential for extension., • Immediate start available., • Opportunity to work on a major marine and reinforced concrete infrastructure project., • Long-term opportunity with a major contractor., • Excellent opportunity to gain further experience on a high-profile infrastructure scheme. Apply Now Apply today with your latest CV or get in touch for more information

We are currently recruiting for an experienced Senior Engineer to join a major marine infrastructure project involving significant reinforced concrete and marine construction works. This is an excellent opportunity to play a key role in the successful delivery of a high-profile infrastructure scheme. The Role As Senior Engineer, you will be responsible for providing technical engineering leadership across the project, ensuring construction activities are delivered safely, accurately and in accordance with the programme, drawings, specifications and quality requirements. Senior Engineer Responsibilities • Providing technical engineering leadership across marine and reinforced concrete construction activities., • Managing and coordinating engineering activities to ensure works are delivered in accordance with the programme., • Reviewing construction drawings, specifications and technical documentation., • Coordinating with the Site Management, Design and Construction teams to resolve technical issues and ensure successful delivery., • Carrying out quality inspections and ensuring works comply with project requirements., • Producing and maintaining QA documentation, Inspection & Test Plans (ITPs), inspection records and check sheets., • Maintaining accurate site records, as-built information and engineering documentation., • Supporting the management of subcontractors and ensuring engineering requirements are clearly communicated and achieved., • Assisting with handover documentation, as-built records and project close-out., • Working closely with the wider engineering and construction team to ensure the successful delivery of the project. Senior Engineer Requirements • Proven experience working as a Senior Engineer or experienced Site Engineer on civil engineering, marine, structural or reinforced concrete projects., • Strong technical understanding of reinforced concrete construction, including reinforcement, formwork, concrete pours and structural elements., • Ability to interpret engineering drawings, specifications and construction information., • Experience producing and maintaining QA documentation, ITPs and inspection records., • Ability to lead and support Site Engineers and junior engineering staff., • Strong communication and problem-solving skills., • Valid CSCS Card essential., • SSSTS/SMSTS desirable., • Full UK Driving Licence preferred. What's on Offer • £350–£420 per day, depending on experience., • 18 + month contract with potential for extension., • Immediate start available., • Opportunity to work on a major marine and reinforced concrete infrastructure project. Apply Now Apply today with your latest CV or get in touch for more information

Quality Engineer – Plymouth (Devonport Royal Dockyard) Contract: Full-time, 42.5 hours per week (08:00–17:00) Recruiting via Carmichael UK Carmichael UK is recruiting for an experienced Quality Engineer to join a major infrastructure redevelopment programme at a high-security Royal Navy site in Plymouth. This is an excellent long-term opportunity to support the delivery of complex works within a live MOD facility. The Role As a Quality Engineer, you will support project delivery teams by ensuring that robust quality management processes are embedded, maintained, and continuously improved throughout the project lifecycle. You will act as a key point of independent quality assurance across site activities, supporting progressive handover, maintaining compliance, and ensuring that work meets strict regulatory, technical, and client standards. Please note: This role requires SC-level security clearance. Candidates must: Hold a passport from a NATO or MISWG member country Have lived in the UK for the past 5 years Security checks may take up to 8 weeks to process. Key Responsibilities Ensuring the Quality Management System is implemented effectively across the project Providing independent communication on quality issues and ensuring appropriate resolutions Completing internal audits in line with the Audit Schedule and closing out findings promptly Preparing, reviewing, and evaluating Inspection & Test Plans (including subcontractor ITPs) Supporting progressive sign-off of ITPs and attending weekly client meetings Managing the material approval process and verifying delivered materials meet project requirements Reviewing Lifetime Quality Records and supporting timely handover documentation Offering guidance, support, and mentoring on quality standards and processes Delivering training on Quality Management System requirements Encouraging and investigating feedback and improvement recommendations Monitoring and reporting on NCR trends to Project and Quality Leadership Promoting a culture of continuous improvement across the project What We’re Looking For Academic qualification in Civil Engineering, Quality, or Construction (HNC, BSc, MSc, BEng, MEng) CSCS White PQP/AQP Experience in quality roles within construction or infrastructure environments Strong understanding of quality systems, audits, and progressive assurance Ability to work within high-security, highly regulated environments Strong communication and stakeholder engagement skills Apply Now If you are a Quality Engineer looking for a challenging and rewarding role on one of the UK's most significant infrastructure programmes, we’d love to hear from you. Apply today through Carmichael UK

Work within the Councils estate of buildings undertaking cleaning duties as directed by line manager in accordance with the practices and procedures of the service.We are keen to employ a diverse workforce that reflects the people of Scotland.We welcome applications from all backgrounds and particul

Significant ContactsR&D Quality Leadership and all R&D Quality functionsGCP, GVP, GLP, and GCLP Quality teamsAudit Management and Inspection ManagementRisk-Based Quality Management, Clinical Operations, Clinical Development, Data Management, Biometrics, and Medical MonitoringPharmacovigilance, Regul

Work within the Councils estate of buildings undertaking cleaning duties as directed by line manager in accordance with the practices and procedures of the service.We are keen to employ a diverse workforce that reflects the people of Scotland.We welcome applications from all backgrounds and particul