Trabajos remote customer en Letchworth Garden CityCrear alertas

Sonovision UK is a leading provider of Engineering Support Services to clients. Our experts help our clients in the Energy, Aerospace, Military and Commercial Sectors achieve time-to-market objectives and cost goals. The role: Sonovision UK has an exciting opportunity for a Supportability Engineer, seeking an exciting new opportunity for career growth. We pride ourselves on developing long term relationships with our customers, providing support for equipment throughout its design life and often beyond. Our ILS solution provides supportability and support solutions consultancy to our customers projects, sales and technology teams. We maximise their capabilities by ensuring products are supportable and supported at optimum Whole Life Cost. We will challenge and support you in equal measure to nurture your potential as an engineer and will give you the chance to utilize and build your skills across all of the ILS disciplines, including Reliability, Availability, and Maintainability, Human Factors, Training, Lifecycle Engineering and Support Solution Design. Opportunity • Tailoring the scope and scale of ILS activities to meet the User, Customer, and Sonovision’s requirements., • Working collaboratively with designers to improve the reliability, maintainability and usability aspects of the customer designs., • Providing input to the development of the optimum support solution for each customer, within the context of a wider product and capability roadmap., • Completing life cycle cost analyses, level of repair analyses, sparing analyses, failure modes and effects analyses., • Eliciting and deriving support requirements and proposing verification methods for requirements., • Developing supportability cases and conducting analyses to provide progressive assurance of support solutions., • Performing reliability modelling and undertaking maintainability analysis to optimize support arrangements., • Assessing the human element of systems, including assessing the potential for human error as a contributor to system failures., • Preparing, or providing input to, technical manuals such as troubleshooting guides or operations and maintenance manuals., • Assisting with the identification and mitigation of hazards through system hazard analysis., • Formulating and implementing the obsolescence strategy for a product line., • Supporting the continuous improvement of processes, policies and procedures. To be considered for this opportunity You will need to: • Hold a bachelor’s degree in engineering, or a technical equivalent, or navy, army or air force equivalent in mechanical or electrical, or experience to match, • Have some knowledge and experience in Reliability & Maintainability – Reliability Prediction, RBDs, FTAs, FMECAs, MTAs, FRACAS/DRACAS, etc., • Have the ability to review work produced by domain specialists across the others:, • Integrated Logistics Support – LCC, LORA, sparing, obsolescence, etc., • Operational Analysis & Whole Life Cost Modelling – Business Case Analysis, Availability analysis, etc., • Training Development, Design and Delivery., • Hold or be capable of achieving Security Clearance (SC)., • Experience using PTC Windchill, Relyence, or some other modelling software is considered an asset. Benefits • 23 days holiday which increases with length of service, • Pension, • Life Assurance, • Private Medical Insurance (Partners and Children included), • Employee Assistance Programme, • Wellbeing Support (Remote GPs, Physiotherapy, Life Coaching, Nutritionist Appointments, Personal Training, etc), • Access to discounts at your favourite retailers, • Electric Car Scheme and more!

Sales Representative Location: Hertford/Stevenage (Hybrid / Office / Remote) Salary: Base salary up to £40k + OTE up to £60-80k Are you a commercially minded sales representative looking for a new opportunity? Do you thrive in a fast-moving environment and motivated by performance? Then this is the perfect role for you! Key Responsibilities • Manage and develop a portfolio of existing customer accounts, • Build strong, long-term relationships through regular communication and support, • Conduct Teams meetings and customer sales calls to understand requirements and present solutions, • Identify and target new customers to drive business growth, • Achieve and exceed sales targets, revenue goals, • Promote and sell a full range of services, including sourcing and supply chain solutions, • Work closely with internal teams to ensure customer requirements are met efficiently, • Stay informed on market trends, pricing, and availability within the electronics industry What We’re Looking For • Proven experience in a sales or account management role, • Strong communication and relationship-building skills, • Self-motivated with a results-driven mindset, • Ability to work in a fast-paced, target-driven environment, • Commercial awareness and problem-solving ability, • Experience in electronics and supply chain What We Offer • Competitive salary + commission structure, • Opportunity to work in a global, high-growth industry, • Ongoing training and development, • Clear progression opportunities within the sales team, • Supportive and collaborative working environment

This is you: a self-starter, with great communication & sales skills, a persuasive ‘people-person’ who enjoys dealing with all sorts of customers, looking to stretch your business development potential to the next level. You’re excited by the uncapped earning potential for self-employment where you get all your appointments and pre-qualified leads supplied by head office, and all the training you need to make your business a success straight out of the blocks. And this is us! Anglian Home Improvements, the UK’s leading home improvement business, proud of our craftsmanship and service, which has kept customers coming back time and time again for 60 years. All our products are made in Britain to the highest industry standards. But the quality products and excellent customer service are only made possible by having great people representing us – and we want to grow our team of outstanding sales and business development representatives. What you’ll be doing You’ll be quickly trainedup to know the products inside out; you’ll be proud of them, and confident in selling them to customers using your existing and growing sales abilities. Your role will involve: Following up on warm sales leads, visiting customers in their own homes or utilising our new remote selling framework Giving persuasive business development pitches to convert quotes to sales Educating customers about the products and ...

Head of Operations Stevenage; Office-based role, not remote or hybrid Up to £60,000 plus significant benefits package and bonus About Meadfleet We are a Multi Award Winning, land owning Open Space Management Company, with a legacy of community building and environmental stewardship since 1995. We manage a diverse portfolio of over 350 residential developments and serve more than 40,000 customers throughout England and Wales. We are recognised as an industry leader, setting best practice standards through a commitment to excellence. Role Purpose This is an office-based role and the most senior operational position. Responsible for orchestrating and leading our field-based team, you will ensure the successful delivery of our high standards and delight our customers. Your department consists of ~15 Field-based Managers whose roles are to pro-actively manage and improve our open spaces within their region. Your department plays the key role in delivering and improving high quality spaces through: • Landscape presentation, • Contractor performance, • Health and Safety compliance, • Customer service excellence, • Ecological enhancement and nature recovery, • Amenity improvements We are seeking a skilled People Manager and Operational Leader to build on our success by driving continuous improvement and excellence across operati...

World Class Defence Organisation is currently looking to recruit a Verification and Validation Systems Engineering Specialist subcontractor on an initial 12 month contract. Rate:£85.00 per hour Overtime Rate: Hours worked over 37 hours per week will be calculated at time and a quarter Location: Stevenage or Bristol (depending on your preference) Hybrid / Remote working: The role will be a hybrid role of on average 2 days per week onsite Contract:37 Hours per week Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) V&V Systems Engineering Specialist Job Description: The Test & Evaluation team are looking for a V&V Systems Engineering Specialist to operate with a high-level of technical responsibility for the entire lifecycle of our product, ranging from design and development to qualification and deployment. A specialist will bridge the gap between design and production, ensuring that complex, high-reliability systems meet our requirements. Key Responsibilities • Test Strategy & Development: Defining test requirements, creating test plans, scoping front end activities with the customer ensuring that requirements are met and understood with the best efficiency maintain...

World Class Defence Organisation is currently looking to recruit 2x Systems Design Engineer subcontractors on an initial 12 month contract. Rate: £80.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: The role can be based either from the companies Stevenage, Bolton or Bristol sites Hybrid / Remote working: circa 4 days onsite (more remote working may be possible) Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Systems Design Engineer Job Description: Seekers department develop RF Seekers for use in Missile products. Responsibilities: Working as part of team developing system architecture and design utilising MBSE. Deriving and managing requirements Communicating with various stakeholders with the Seeker team and the external customer and suppliers Developing Physical and Functional Architecture using SysML techniques. Developing Seeker Functional and Operational function and design. Skillset/experience required: Experience with deriving and managing requirements, Experience with generating Functional and Physical Architecture using SysML, ARCADIA, or similar MBSE language, Experience dissecting and understanding customer requirements and disseminating them down into lower...

World Class Defence Organisation is currently looking to recruit 2x Systems Design Engineer subcontractors on an initial 12 month contract. Rate:£80.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at time and a quarter Location: The role can be based either from the companies Stevenage, Bolton or Bristol sites Hybrid / Remote working: circa 4 days onsite (more remote working may be possible) Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Systems Design Engineer Job Description: Seekers department develop RF Seekers for use in Missile products. Responsibilities: • Working as part of team developing system architecture and design utilising MBSE., • Deriving and managing requirements, • Communicating with various stakeholders with the Seeker team and the external customer and suppliers, • Developing Physical and Functional Architecture using SysML techniques., • Developing Seeker Functional and Operational function and design. Skillset/experience required: <...

As the ServiceNow Solution Architect (CSM) you will focus on driving process improvement, system integration, and scalable architecture, with a strong emphasis on Customer Service Manage. ServiceNow Solution Architect (CSM) - Remote. A leading consultancy are seeking a highly skilled ServiceNow Solu

You can do this part-time or full-time. This position is perfect for anyone looking for temporary, part-time or full-time work. If you are a customer service representative agent or someone just looking for a flexible part time remote work from home job, this is a great way to supplement your income

If you are a customer service representative agent or someone just looking for a flexible part time remote work from home job, this is a great way to supplement your income. Customer Service Representative Agent Work From Home - Part Time Remote Focus Group Panelists. No Customer Service Representat

UK Product Testers is a consulting firm that specializes in product testing and product development work. Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or m

World Class Defence Organisation is currently looking to recruit 2x Senior Electronics Engineering Project Manager subcontractors on an initial 12 month contract. The role will be a hybrid of working from home and being onsite 2 days per week (flexibility on this). Please Note – this role requires a very strong Electronics background or a background of working on electronic focused/biased projects. The position will be managing detailed design of electronics product / engineering development Job Title: Senior Electronics Engineering Project Manager Number of positions: 2 Rate: £60.00 per hour Location: Stevenage, Bolton or Bristol – depending on your preference Hybrid / Remote working: 2 days per week onsite (flexibility on this) Contract: 37 Hours per week Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Senior Electronics Engineering Project Manager Job Description: We are Electronics Engineering. We are growing, dedicated and we work as a team to deliver our projects. Your role as a Senior Engineering Project Manager (SEPM) is to deliver our most complex and priority projects to time, cost and quality; to drive the design, development and delivery of our highly complex electronic sub-systems, from concept through into full production. This is a fantastic opportunity to be a senior member of the project management team; someone who will contribute to our delivery strategy. Skillset/experience required: Experience of Project Management best practice: Risk Management, Stakeholder Management, Compliance Management, Configuration Management and Earned Value Management. Experience of delivering significant project/programmes on time and to cost. Experience of project management across the various phases; from project conception and initiation through manufacture and qualification to customer delivery. A background in engineering development, ideally of complex systems or electronic units. Electronics Development experience is more important than the industry

World Class Defence Organisation is currently looking to recruit a Mechanical Design Engineer (Military Packaging Design) subcontractors on an initial 12 month contract. This role would suit a Mechanical Design Engineer who comes from a strong Defence or Aerospace background has strong Creo / PRO-E skills. Job Title: Mechanical Design Engineer Rate: £50.00 per hour Location: Stevenage Hybrid / Remote working: Hybrid, 2-3 days min on site. Although this can change due to workload. Can be continually reviewed. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Mechanical Design Engineer - Military Packaging Design Job Description: An opportunity to become part of Europe’s No. 1 Missile Systems Designer, as a Mechanical Design Engineer. You will work closely with other functional teams, to develop products to meet our customer’s needs. Within this role you will have the opportunity to undertake cutting-edge research of novel mechanical technologies to meet the challenges of tomorrow. Responsibilities: Mechanical Engineering is excited to offer an opportunity for an experienced Mechanical Design Engineer within our Military Packaging Design Team; involving Product Life Cycle, from concepts and detailed designs through to trials, qualification, production, and further in-service support. In this role, you will design and develop mechanical solutions for a wide variety of complex Military Packaging for critical defence products. You will influence design decisions across the full life cycle and play a key role in ensuring designs meet performance, safety, cost and scheduled customer requirements. You will work closely with multi-disciplinary teams across engineering, manufacturing, quality and supply chain. Appointments will be made at an appropriate level based on skills and experience. Skillset/experience required: Ideally Degree, HND, or HNC in Mechanical Engineering (or equivalent) with relevant industry experience Proven ability to work within multi-disciplinary teams across mechanical design work packages Strong experience across full product life cycles, from concept to in-service support In-depth knowledge of design proving and qualification activities Robust hands-on experience with design methodologies such as DFMEA, DFA, and DFM Strong communication skills with the ability to influence, negotiate, and make technical decisions Experience engaging with and developing suppliers and external partners Ability to manage priorities, assess risk, and mentor less experienced engineers Relevant 3D CAD/CAE experience (training provided on company tools)

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a Purchasing / Procurement Officer. The role does require a Procurement background and understanding of SAP. Rate: £27.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage Hybrid / Remote working: The role will be 1 or 2 days a week in the office and the rest remote Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Purchasing / Procurement Officer Job Description: Focal point for working with the CSS Spares and Repairs Team in the organisation and the management of customer repairs and spares procurement based upon the requests made by internal project teams. Supplier assessment, adherence to open order books, supplier communications to ensure on time deliveries, communication/solutions provision for delayed deliveries and measuring/feedback on supplier performance. Responsibilities Purchasing • Responsibilities include processing of electronic and manual requisitions. • Use of SAP to raise request for quotations (RFQ) • Creating Excel spread sheets to assess the data to aid supplier selection process. • Raising of purchase orders within SAP. • Progressing of orders to ensure on time delivery to the internal customers. • Purchase order amendment in line with changing delivery forecasts post order acknowledgment. • Maintain dialogue with internal customer to ensure topical delivery forecast are maintained. • Holding & supporting business operational reviews Administration • Liaise with both Bought Ledger and vendors to resolve Invoice queries and enable timely and accurate payments. • Data cleansing of SAP to ensure accurate data collection. • Quality assessment and measurement of suppliers. Distribution of monthly reports to vendors and ensuring correct reason codes are annotated, enabling accurate reports for delivery and quality purposes. Skillet/experience required: • Proactive approach flexible self-starter • IT Literate - Must be able to use Microsoft Office (Word; Power Point; Excel; Outlook) to a proficient level. (A working knowledge of SAP is an advantage.) • Education: Educated to basic secondary level: (Maths, English to O level/GCSE/NVQ as a minimum) • Ability to effectively communicate and maintain good relations with both internal customers and external suppliers. • Ability to work under pressure to deadlines in a professional manner

World Class Defence Organisation is currently looking to recruit a Software Test Engineer subcontractor on an initial 12 month contract. Rate: £65.00 per hour Location: Stevenage Hybrid / Remote working: 4 days a week likely onsite. A compressed 4 day week (Monday to Thursday) a possibility. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Software Test Engineer Job Description: An exciting opportunity to work as a Software Testing Engineer within the Environment Simulators team based in our Stevenage office with our simulation developers. The Simulation Software department is at the forefront of developing simulations for the Weapon System and sub-systems teams using the full development life cycle and agile methodologies. Our simulations follow best practices and capability to ensure our products are rigorously tested, fit-for-purpose, and ready for delivery. As a Software Testing Engineer, you aren't just finding bugs; you are a Quality Advocate ensuring our simulations are mission-ready. Reporting to the Group and Project Leads, you will be responsible for the end-to-end software testing and proving lifecycle for our simulation software releases and software defects. Your responsibilities will span planning, conduct, and reporting: Test/Proving Planning Understanding Customer needs and requirements from a proving perspective. Understanding design and architecture including defining software test bed requirements. Developing comprehensive software test plans, writing, and running test sets, designs, and specifications. Test/Proving Conduct Regular progressive software testing assurance during software development cycles. Leading testing of software defects. Liaising with our Support team in order to provide logs/data analysis when issues are identified. Demonstrate compliance to requirements. Executing formal software qualification testing. Test/Proving Reporting Providing regular updates to project leads and stakeholders on software functionality. Writing detailed software test and analysis reports for certification purposes. Supporting the software delivery and release process, including final certification activities. Technical Knowledge Software Test automation Understanding software Logs/Data analysis CI/CD software pipelines GitLab, JIRA, scripting, IBM PLM/ ALM/ EWM /Doors Knowledge of Agile Scrum Ability to understand (or experience with) compliance and regulatory requirements AI test automation tooling (Desirable) Software Simulation/Emulator knowledge (Desirable) Linux Network Configuration and analysis tools (Desirable)

Who we are: Modern Networks, established in 2000, is a growing IT Managed Service Provider (MSP) and Internet Service Provider (ISP) specialising in delivering services to the property management sector and commercial businesses nationwide. We work closely with customers to deliver a wide range of IT services, from endpoint technology to connectivity and telephony. Our partnerships with market‑leading vendors enable us to deliver first‑class services and solutions. The Job: The Senior Network Support Engineer sits in our third line managed services, and plays a key role in maintaining and supporting both internal and external network infrastructure and services. The role focuses on the management, operation, and support of network systems and equipment. You will respond to incidents, service requests, and system‑generated events, ensuring stability, performance, and excellent customer experience. Additionally, this role requires participation in our Out of Hours rota (approx 1 in every 4 weeks) What we Looking for: • Previous experience in a network‑focused IT service role, • Relevant certifications (e.g., CCNA, CCNP, Fortinet NSE, JNCIA, etc.), • Strong experience configuring and supporting routers and switches, • Demonstrated experience in managing Cisco and/or Fortinet technologies, • Experience with security products, especially Cisco ASA & Firepower, • Understanding of routing protocols (BGP, OSPF), • Experience with monitoring tools (LibreNMS, Fortinmanager, Nagios), • Knowledge of network security, AAA, TACACS, RADIUS, 802.1X, • Good understanding of wireless systems (Meraki, Ubiquiti, Cisco, etc.), • Experience using ITSM tools for ticketing, time logging, and remote support, • Strong documentation skills (network diagrams, troubleshooting guides, WIs) What you’ll get from us • Great prospects - once you’ve got to grips with our systems and processes, you’ll have the opportunity to progress with us., • Knowledgeable, high-achieving, experienced and fun colleagues, • A career with room for your personal life in a work environment where everyone knows the value of a healthy work-life-balance, • Commitment to Diversity and Inclusion - we hire great people from a wide variety of backgrounds, not just because it’s the right thing to do, but because it makes us stronger., • 25 days annual leave + bank holidays Sounds like you? If you share our values and our enthusiasm for delivering a world class service, you will find a home at here at Modern. Or if you’re still not convinced, drop us a line – we’ll arrange an informal chat about the role

World Class Defence Organisation is currently looking to recruit a Mechanical Design Engineer (Military Packaging Design) subcontractors on an initial 12 month contract. This role would suit a Mechanical Design Engineer who comes from a strong Defence or Aerospace background has strong Creo / PRO-E skills. Other CAD Package skills are also fine. Job Title: Mechanical Design Engineer Rate: £50.00 per hour Location: Stevenage Hybrid / Remote working: Hybrid, 2-3 days min on site. Although this can change due to workload. Can be continually reviewed. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Mechanical Design Engineer - Job Description: An opportunity to become part of Europe’s No. 1 Missile Systems Designer, as a Mechanical Design Engineer. You will work closely with other functional teams, to develop products to meet our customer’s needs. Within this role you will have the opportunity to undertake cutting-edge research of novel mechanical technologies to meet the challenges of tomorrow. Responsibilities: Mechanical Engineering is excited to offer an opportunity for an experienced Mechanical Design Engineer within our Military Packaging Design Team; involving Product Life Cycle, from concepts and detailed designs through to trials, qualification, production, and further in-service support. In this role, you will design and develop mechanical solutions for a wide variety of complex Military Packaging for critical defence products. You will influence design decisions across the full life cycle and play a key role in ensuring designs meet performance, safety, cost and scheduled customer requirements. You will work closely with multi-disciplinary teams across engineering, manufacturing, quality and supply chain. Appointments will be made at an appropriate level based on skills and experience. Skillset/experience required: Ideally Degree, HND, or HNC in Mechanical Engineering (or equivalent) with relevant industry experience Proven ability to work within multi-disciplinary teams across mechanical design work packages Strong experience across full product life cycles, from concept to in-service support In-depth knowledge of design proving and qualification activities Robust hands-on experience with design methodologies such as DFMEA, DFA, and DFM Strong communication skills with the ability to influence, negotiate, and make technical decisions Experience engaging with and developing suppliers and external partners Ability to manage priorities, assess risk, and mentor less experienced engineers Relevant 3D CAD/CAE experience (training provided on company tools)

World Class Defence Organisation is currently looking to recruit a number of Mechanical Systems Engineer / Architects on an initial 6 month contract. The department can have the role based from either the Stevenage, Bristol or Bolton sites. This role would suit a candidate who comes from a strong background of working as a Mechanical Design Engineer, Mechanical Systems Engineer, Mechanical Architect or has experience of Mechanical Systems Architecture. A defence / aerospace background is ideal but not essential. DOORS experiencewould be great. Rate: £60.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at time and a quarter Location: Stevenage, Bolton or Bristol depending on your preference Hybrid / Remote working: 3-4 days onsite needed. Will be 5 days onsite to begin with due to training needs Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Mechanical Systems Engineer / Architect Job Description: We have an opportunity for an experienced Mechanical Architect to join the team. This exciting role is to gather and manage the missile mechanical architecture requirements to achieve missile performance, on time and on cost and overall layout vs compliance. This involves providing justification of the design and co-ordinate the verification evidence of missile performance to support certification. Responsibilities: The role is responsible for the delivery of the missile mechanical architecture requirements and typical responsibilities include: Establishing the Missile Airframe Task Requirements Specification (TRS) to ensure a structured & coherent mechanical response to the overall Missile TRS Management of the mechanical interface with the launcher Management of Mechanical & Thermal Interfaces across the Missile Defining the optimum mechanical architecture for all variants of the missile, ensuring the mechanical architecture and interfaces meet requirements Implementation of GMA Policies to ensure Modularity & Reuse objectives are achieved Development of the overall proving logic for the validation of the Airframe Ensuring mechanical compliance to the Airframe TRS for missile certificate of design Interface with and manage customer expectations throughout the development process Producing Statements of Work and plans for activities within their sphere of responsibility Direct technical supervision of engineers within their team and indirect management of engineers in the extended project team Controlling assigned budgets, managing personal workload and identifying any further resource needs Skillset/experience required: Educated to degree level with 10 years experience or an equivalent qualification having obtained significant experience of mechanical engineering Ability to technically manage internal & sub-contract activities Strong leadership skills, able to establish a clear engineering vision Good knowledge & experience of mechanical design, including: Static & Dynamic Analysis, Design for Environment or Thermal Management. Good understanding of broader engineering disciplines, including: Aerodynamics Testability Production Experience developing proving logic and managing the generation of compliance evidence towards Certificates of Design Experience across the full Product Life Cycle Ability to influence senior managers and other stakeholders Strong interpersonal and well developed communication skills (written & verbal) Willingness to travel within UK and Europe DOORS experience wouldbe great TPBN1_UKTJ

World Class Defence Organisation is currently looking to recruit a number of Mechanical Systems Engineer / Architects on an initial 6 month contract. The department can have the role based from either the Stevenage, Bristol or Bolton sites. This role would suit a candidate who comes from a strong background of working as a Mechanical Design Engineer, Mechanical Systems Engineer, Mechanical Architect or has experience of Mechanical Systems Architecture. A defence / aerospace background is ideal but not essential. DOORS experience would be great. Rate: £60.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage, Bolton or Bristol depending on your preference Hybrid / Remote working: 3-4 days onsite needed. Will be 5 days onsite to begin with due to training needs Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Mechanical Systems Engineer / Architect Job Description: We have an opportunity for an experienced Mechanical Architect to join the team. This exciting role is to gather and manage the missile mechanical architecture requirements to achieve missile performance, on time and on cost and overall layout vs compliance. This involves providing justification of the design and co-ordinate the verification evidence of missile performance to support certification. Responsibilities: The role is responsible for the delivery of the missile mechanical architecture requirements and typical responsibilities include: Establishing the Missile Airframe Task Requirements Specification (TRS) to ensure a structured & coherent mechanical response to the overall Missile TRS Management of the mechanical interface with the launcher Management of Mechanical & Thermal Interfaces across the Missile Defining the optimum mechanical architecture for all variants of the missile, ensuring the mechanical architecture and interfaces meet requirements Implementation of GMA Policies to ensure Modularity & Reuse objectives are achieved Development of the overall proving logic for the validation of the Airframe Ensuring mechanical compliance to the Airframe TRS for missile certificate of design Interface with and manage customer expectations throughout the development process Producing Statements of Work and plans for activities within their sphere of responsibility Direct technical supervision of engineers within their team and indirect management of engineers in the extended project team Controlling assigned budgets, managing personal workload and identifying any further resource needs Skillset/experience required: Educated to degree level with 10 years’ experience or an equivalent qualification having obtained significant experience of mechanical engineering Ability to technically manage internal & sub-contract activities Strong leadership skills, able to establish a clear engineering vision Good knowledge & experience of mechanical design, including: Static & Dynamic Analysis, Design for Environment or Thermal Management. Good understanding of broader engineering disciplines, including: Aerodynamics Testability Production Experience developing proving logic and managing the generation of compliance evidence towards Certificates of Design Experience across the full Product Life Cycle Ability to influence senior managers and other stakeholders Strong interpersonal and well developed communication skills (written & verbal) Willingness to travel within UK and Europe DOORS experience would be great

World Class Defence Organisation is currently looking to recruit a Head of FCAS Systems Design Co-Ordination ( Systems Engineer Manager ) subcontractor on an initial 6 month contract. This position would suit a candite from the Defence / Aerospace industries and from a Systems Engineering Management background. Rate: £80.00 per hour Location: Bristol, Stevenage or Bolton, depending on your preference. Hybrid / Remote working: Hybrid, 3 days per week onsite (the department can offer a compressed 4 day week of Monday to Thursday) Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Interview process: 1 stage video interview Head of FCAS Systems Design Co-Ordination Job Description: FCAS is one of the largest, most exciting and challenging programmes within Defence – to design and deliver a Future Combat Air Programme for the RAF in record time. The key cornerstone of FCAS is the Global Combat Air Programme (GCAP), which sees the UK working with our international partners Italy and Japan. FCAS and GCAP combined present a unique opportunity to influence the design of the platform and wider system to reflect a new approach to weapon integration and employment of effects rather than just traditional integration of effectors to an existing platform. The FCAS portfolio consists of a number of different projects and contracts looking at different areas within Combat Air. The company is involved in a number of these projects including the TEMPEST project, where some novel technologies are being explored, the main UK FCAS Acquisition Programme, as well as the Global Combat Air Programme (GCAP). This is a fantastic opportunity to join the FCAS Programme within the Systems Delivery Coordination area as the Head of FCAS Systems Engineering Co-ordination. As the Head of FCAS Systems Engineering Co-ordination you would support a team of 70 engineers, a highly visible role that would report directly to the Chief Systems Engineer (CSE) and also deputise for them within the company, external partners and the Customer. This role will have responsibility to define sector wide engineering process and will ensure co-ordination over the CSE organisation. This is an exciting role that reaches across FCAS both within the company and our external partners. Responsibilities: Senior Engineering manager for System Products & Technologies Task Group (CSE owned Task Group - SPaT) Support with recruitment Support the team with effective development plans Manage mobility within the team Lead the Systems Design Co-Ordination & Transversals Team (SDCaT Team) Line management of team within SDCaT Ownership of activities assigned to SDCaT: Human Factors management and co-ordination Through Life Services Safety Product Security Weapon Integration Manage programme wide engineering governance Ownership of Project gates and design reviews Ownership of Engineering Management Plan and Systems Engineering Management Plan Management of Stakeholders Manage relationship with the customer Manage relationship with MOD Manage relationship with internal stakeholders Bid and long term planning for SDCaT Provide technical review of the outputs from SPaT Skillset/experience required: Demonstrable ability to form and maintain strong relationships within both the sector and with our external partners Strong leadership to be able to develop individuals roles on project and ensure they have the right opportunities Excellent understanding of multiple stakeholder needs and how these align within a wider business context to aid effective decision making Ability to influence and drive a narrative Fantastic attention to detail along with excellent organisational and communication skills

World Class Defence Organisation is currently looking to recruit a Verification and Validation Systems Engineering Specialist subcontractor on an initial 12 month contract. Rate: £85.00 per hour Overtime Rate: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Location: Stevenage or Bristol (depending on your preference) Hybrid / Remote working: The role will be a hybrid role of on average 2 days per week onsite Contract: 37 Hours per week Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) V&V Systems Engineering Specialist Job Description: The Test & Evaluation team are looking for a V&V Systems Engineering Specialist to operate with a high-level of technical responsibility for the entire lifecycle of our product, ranging from design and development to qualification and deployment. A specialist will bridge the gap between design and production, ensuring that complex, high-reliability systems meet our requirements. Key Responsibilities Test Strategy & Development: Defining test requirements, creating test plans, scoping front end activities with the customer ensuring that requirements are met and understood with the best efficiency maintained for deliveries. System Validation: Overseeing or supporting the qualification and acceptance of test equipment, ensuring it is robust, compliant, and accurate. Analysis & Troubleshooting: Analysing test data, identifying performance bottlenecks, and troubleshooting validation issues. Documentation & Governance: Producing technical documentation (test procedures, reports) and ensuring compliance with safety and regulatory standards. Support departmental strategy and support the department head with recruitment of the right people into the team. Proven ability to influence senior stakeholders within the business relating to technical direction Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Essential Skills & Qualifications Technical Knowledge: Strong understanding of electronics or mechanical systems, a degree in Electrical Engineering or a similar discipline. Hands-on Experience: Expertise in operating general-purpose test equipment (e.g., oscilloscopes, spectrum analyzers, signal generators). Industry Standards: Knowledge of safety-critical standards, particularly within aerospace, defence (e.g., MOD), or rail sectors. Communication: Ability to work within multi-disciplinary teams and liaise with customers for system acceptance. Hands-on experience of DOORS & DOORS NG, SysML & Rhapsody would be desirable, but training will be provided where needed. Experience in DfT and testability. RF / Microwave systems knowledge would be desirable

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies. Most research studies are conducted remotely from home, though some may be in-person. Comfort participating in remote, market r

Czech & German OR Czech & Polish Customer Service Representative - (Hybrid, mostly remote). The representative will be dealing with inbound and outbound calls on a daily basis to ensure a top-quality service for existing and new customers. You will be in charge of adding value to each customer.

We are Remote First - we champion a remote environment with a preference for asynchronous communication and a high degree of autonomy. Our Customer Care Consultants are partners to our clients and are responsible for gathering information and ensuring their continued support and success after implem

Building long-term customer relationships. Remote — work from anywhere in the UK. Commission per customer + residual income.

You will handle customer inquiries across various platforms, ensuring exceptional support and effective problem resolution. The ideal candidate must be fluent in Norwegian and English, possess strong communication and negotiation skills, and have experience in customer support. Ventureslab is seekin

Senior Customer Success Manager to maintain strong relationships with key decision-makers in the United Kingdom. The role involves driving customer satisfaction, leading initiatives for business impact, and ensuring successful adoption of solutions. Candidates should have a Bachelor's degree in Chem

A growing startup in health and wellness is seeking a Part-Time Customer Service Advisor to provide support for customer inquiries and enhance the customer experience. The ideal candidate will have customer service experience and excellent communication skills. Flexibility is essential, with options

Doing this enables merchants and customers to capture immense efficiencies, drive better customer experience, reliability and business outcomes. As part of the Customer Success organization, you will combine systems expertise, analytical problem‑solving, and customer partnership to deliver measura

As a Senior Customer Experience Specialist, you’ll manage front-line support, own the customer feedback loop, and ensure every interaction is handled with clarity and care. Senior Customer Experience Specialist to help shape and scale its customer experience systems. Senior Customer Experience Spe

Customer Success Manager based in Greater London to oversee a portfolio of global customers, ensuring they derive maximum value from the Interu application. The ideal candidate will have over 4 years of experience in Customer Success within the SaaS industry, strong communication skills, and a passi

Dataminr is seeking a Cyber Customer Success Associate to drive product adoption and renewals among EMEA customers. This role combines interests in technology and customer success, focusing on the strategic growth of Private Sector accounts. Ideal candidates have a Bachelor's degree, experience in e

ENSEK is seeking a Customer Success Manager responsible for enhancing customer retention and value within enterprise accounts. Benefits include remote-first working, health insurance, and generous holiday allowances. This role mixes consultative advising, relationship building, and problem solving t

Group in the United Kingdom is seeking a Customer Relations Specialist to handle inquiries and resolve issues, ensuring a positive customer experience.

As a Customer Success Specialist, youll be responsible for onboarding new clients, providing product training, resolving customer issues, and ensuring long-term satisfaction. Why remote work suits your lifestyle. Collaborative and customer-focused team culture.

We are seeking a Remote Travel Customer Representative to support travelers before, during, and after their trips. Resolve issues efficiently while maintaining a positive customer experience. Customer service experience (travel, hospitality, call center, or support roles preferred).

Deployed Customer Engineer (DCE) to bridge the gap between engineering excellence and client ambitions. This role involves writing production-grade code, creating database solutions, and collaborating with customers to overcome technical challenges. The DCE will optimize Couchbase products for perfo