System jobs in Hitchin - Page 4Create job alerts

MERITUS are recruiting for a Principal Quality Assurance Engineer to support with Supply Chain engineering programmes in the defence sphere from our client's site in Stevenage. Please note, there will be regular supplier visits to international sites and you must have awareness of AS9100 and ISO 9001. PRINCIPAL QUALITY ASSURANCE ENGINEER - INSIDE IR35 - £45 PER HOUR (£333 PER DAY) - 6 MONTHS - 2 STAGE INTERVIEW PROCESS - STEVENAGE (+INTERNATIONAL TRAVEL) Complete scheduled Quality Assurance audits at suppliers using standardised tools Conduct thorough verification / inspection of products to ensure they meet the required quality standards Identify and document any non-conformities in the manufacturing process and deviations from the product specifications Maintain accurate and organized records of all quality control activities Communicate findings to relevant departments / stakeholders and work cross functionally to implement root cause corrective actions at supplier Contribute to continuous improvement initiatives to enhance the quality of our products Participate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers Provide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders What we're looking for from you: Trained auditor to AS9100 is essential Experienced in conducting Quality Audits & surveillance Ideally minimum HNC/HND in Engineering would be desirable Experienced quality professional within Mechanical, Manufacturing or Electronic Engineering Proven track record in Quality, Supply Chain or Manufacturing Ideally defence, automotive or aerospace experience Familiarity with GD&T and able to use a variety of metrology equipment (where applicable) Practitioner of current QA problem solving and improvement methods (8D, RCA, DMAIC, etc.) Strong knowledge of the product lifecycle management Strong analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools Continuous improvement awareness and ability to use own initiative to deliver improvements Experience is NADCAP is desirable Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Ability to communicate and influence effectively at all levels of the organisation Recognise and understand regulatory and certification requirements, and respond to them

Stevenage The Launch Management System Design Authority is responsible for ensuring the technical development of, certification sign-off and in-service support for the Launch Management System (LMS) on two major programmes, Sea Ceptor and Land Ceptor. Salary: £49,000 - £57,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The Opportunity The Launch Management System (LMS) is a critical component in ensuring the safe and secure launch of missiles from our Weapon Systems. The LMS Design Authority is responsible for ensuring the technical development of, certification sign-off and in-service support for the Launch Management System (LMS) on two major programmes, Sea Ceptor and Land Ceptor. By building on and maintaining a complex structure of functional and physical design, you will ensure every aspect of the product can be verified, validated and accepted into the Weapon System capability by our Customers. In this role, you will be expected to have a high level of engagement across a variety of technical aspects, including system design, software engineering, electronics and mechanical engineering, in-service reliability and support, safety, cybersecurity and other disciplines. In addition, you will need to ensure the hardware and software design continues to evolve in order to meet the demand of the overall system capability expected by our customers. The LMS Design Authority will be supported in their career development goals and will ensure expertise are maintained within the team to promote the design goals required of the team and wider MBDA organisation. What we're looking for from you: If you have experience or are interested in developing your skills in the following areas, this role may be for you: Design leadership for a complex electronics subsystem Manage technical risks and opportunities in line with product development requirements Developing strong relationships with Product Design stakeholders Mastering Systems engineering principles, processes and practices Requirements engineering at System, Subsystem or Component level to enable evolution of the product design and system certification Broad knowledge associated with the design and build of hardware and software for computer based electronics equipment Ability to validate test procedures required to verify products and gather evidence to enable certification.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

An exciting opportunity has arisen for a Technical Co-ordinator to join the Calibration & Maintenance team, delivering support, services and measurements to MBDA and its customers. Salary: Circa £45,000 depending on experience Hybrid working pattern: 4 days per week on-site, due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking a technical co-ordinator to join the Calibration and Maintenance team at our Stevenage site. The main focus of the role will be to manage external service providers to ensure timely maintenance and calibration activities are carried out on MBDA owned test equipment. Working as part of a small Control Team within the wider Calibration & Maintenance department, you will produce and review technical reports for calibrated and serviced equipment, ensuring they conform to MBDA requirements. In addition to this, you will be a focal point for all calibration and maintenance aspects of the SAP enterprise resource planning system, including providing training and support. Key areas of responsibility are as follows: Managing external calibrations and equipment repairs with service providers including reviewing technical calibration certificates to ensure they conform to MBDAs requirements. Managing of service contracts for MBDA owned equipment, including the introduction of contracts for new equipment. Management of critical spares; deploying critical spares packages and managing calibration requirements to minimise downtime to production Providing SAP training and producing documentation for calibration and maintenance specific activities for the wider MBDA functions.What we are looking for from you: Minimum qualification: at least HNC. Experience and knowledge of mechanical and electrical measurement techniques. Working knowledge of the SAP (Systems Applications and Products in data processing) enterprise resource planning system, Sharepoint and JIRA. Good analytical and problem solving skills. Experience in creating and managing service contracts with external suppliers would be an advantage. Whilst not essential, a good understanding of calibration principles and processes would be beneficial. The ability to deal with multiple issues, tasks and priorities concurrently.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Stevenage The Land Ceptor System of Systems organisation is growing fast in order to support delivery of export contracts and evolution of the product to enhance the capabilities for our customers. As a System of Systems engineer your primary objective is to support the functional integration of the Land Ceptor product into a wider Ground Based Air Defence Weapon System context. Salary: £45,000 - £50,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The Land Ceptor System of Systems organisation is growing fast in order to support delivery of export contracts and evolution of the product to enhance the capabilities for our customers. As a System of Systems engineer your primary objective is to support the functional integration of the Land Ceptor product into a wider Ground Based Air Defence Weapon System context. You will have experience in functional design and/or integration to demonstrate your understanding of the challenges of integrating complex systems into a larger / wider system context. This role will involve working with our customer to support system requirements and architecture definition whilst working internally within a multidisciplinary team to develop a product that meets this need. We are looking for flexible and motivated candidates to work collaboratively with our customers, industry partners and internal project teams to develop solutions for existing and future programmes. The work is varied, providing you with a unique opportunity to develop a wider awareness of multiple engineering disciplines alongside contributing to critical programme delivery in the form of System architectural design and requirements definition. What we're looking for from you: Engineers at varying levels with: Experience in developing and integrating complex systems, preferably in the defence industry Strong systems thinking skills with the ability to initiate and drive trade studies Excellent communication skills to effectively convey technical information to a variety of stakeholders Experience developing requirement sets, and an ability to agreeing these collaboratively with different stakeholder groups including System Design Authorities and Government organisations Project engineering knowledge to be able to design and deliver work packages Familiarity with system architecture tools, including DOORS and RhapsodyOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Due to increased workload, we are looking for experienced Principal Mechanical Design Engineers to work in all areas of the Product Life Cycles with the drive and enthusiasm to join Europe's leading missile systems provider, developing and designing Test Equipment solutions for the next generation of weapons. Salary: Up to £55,000 depending on Experience Location: Stevenage (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: Maximum total (employer and employee) contribution of up to 14% Overtime:Opportunity for paid overtime Flexi Leave:Up to 15 additional days Flexible working:We welcome applicants who are looking for flexible working arrangements Enhanced parental leave:Offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Due to increased workload, we are looking for experienced Principal Mechanical Design Engineers to work in all areas of the Product Life Cycles with the drive and enthusiasm to join Europe's leading missile systems provider, developing and designing Test Equipment solutions for the next generation of weapons. You will support design, development and proving activities, throughout the product lifecycle, for a wide range of bespoke test system hardware. This opportunity provides fantastic development opportunities for career progression within MBDA. What we're looking for from you: Ideally Degree/HND/HNC qualified plus significant experience in Mechanical Design and Development. A strong understanding and use of GD&T would be advantageous. The ability to lead mechanical design work packages and have experience of working within a multi-disciplinary team with the awareness and understanding of the challenges that this may bring. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Strong communication skills, both written and verbal with the ability to influence and negotiate with partners across the business. Experience of supplier engagement and development across internal and external multi-disciplinary teams. The awareness and understanding of cultural differences with the ability to adapt accordingly. A willing, helpful attitude, a calm professional manner, and the ability to assess and set priorities and deal with multiple issues on a regular basis. Relevant 3D CAD/CAE experience (training on our preferred CAD tools will be given) An understanding of manufacturing processes, design for EMC, connectors to BS & military specifications, tolerance studies environmental test, thermal management design, material selection would be advantageous.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function and will be deployed to the Stevenage-based Manufacturing Equipment team, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent (ideally HND/degree) in a relevant subject, plus significant experience in digital, analogue and RF electronics manufacture and test. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Ready to find the right role for you? Salary: up to £52,000 per annum plus bonus scheme, car allowance and other Veolia benefits Hours: 40 hours per week Location: Airbus Stevenage, Gunnels Wood Road, Stevenage, SG1 2AS When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. Whether you're looking to overhaul the industry, or just do a good day's work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you: * 25 days of annual leave * Access to our people's pension scheme * Free physiotherapy service * Discounts on everything from groceries to well known retailers * Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to * Ongoing training and development opportunities, allowing you to reach your full potential What you'll be doing: * Deliver effective maintenance services into M&E and Building Fabric to fully meet both contractual and statutory requirements. * Effectively manage all Hard Services operations, including small projects. * Be an essential part of the management of a team who will ensure the safe operation of all plants and equipment on the site. * Responsibility for implementation and management of a permit to work system and compilation of producing a SSoW. * Ensure operational, planned, and reactive maintenance activities are effectively scheduled and undertaken on time and in accordance with Statutory Legislation, appropriate maintenance specification and agreed SLA response times. * Communicate effectively with clients, vendors, and team members. * Compilation and presentation of reports and recommendations. * Actively share with the client opportunities for improvements and new best practices. What we're looking for: * Ability to pass SC clearance * A time served professional with a demonstrable work history within the building services sector * HND or NVQ equivalent in an associated hard services trade (electrical / mechanical / HVAC) * Previous experience in a management role as the team lead with good HR experience across all aspects of people management * Experience with budget control and expenditure with a proven track record of P&L management, effective cost management and margin achievement * Able to compile local policies and procedures whilst demonstrating alignment with group and statutory best practice. * Has a culture of cooperation, collaboration, and teamwork across the operation and ensures a smooth and positive interface with relevant stakeholders. * IOSH or NEBOSH qualification - desirable What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. Were looking for a Principal Materials Engineer with a strong non-metallic materials engineering background, to join our materials and test team to support the production and development of next generation composite aero structures, ice protection and transparency products. The role will be based in the Materials, Coatings and Test (MCT) team within the wider Engineering and Technology department and report to the Functional Team Leader. The role as a Principal Materials Engineer will support the business and engineering team, with non polymer materials science and processing knowledge and guidance. The role will provide a deep understanding of the interactions between processing parameters and material properties of composites, Acrylics, Polycarbonates and adhesives, being able to guide and make decisions on new technology test plans and current production deviations. There will be occasional travel, national and international, required to support customer visits and other GKN sites. You will also support the work of the business to establish safe working practices and necessary level of documentation. You will be involved with projects from the planning / assembly / instrumentation / commissioning phase though to successfully performing and reporting the test. You will also be responsible for providing specialist support to existing programmes within your field of expertise, helping to resolve manufacturing issues and supporting continuous improvement efforts. You will have a proven track record of leading and delivering technical work, with strong communication skills being confident working with a broad range of internal and external stakeholders, including non-technical audiences. Job Responsibilities Development of manufacturing processes in relation to polymer, composite and adhesive materials Qualification of materials and processes to assure they comply with the requirements Assessment of deviations from the specified materials and processes requirements to assure continued airworthiness Support operational and development programs to enable and deliver zero defect projects utilizing engineering and problem solving skills. Accountable for delivering robust, manufacturing process technologies as applied to materials, tooling, part fabrication and assembly. Promote GKNs technical capability globally to the broader technical eco-system, including customers, suppliers and steering groups. Collect inputs, related to a task and take it through an identified process to produce an output / deliverable adhering to quality and schedule requirements. Coordination/project lead for REACh activities: identification of arising issues regarding the REACh legislation, providing support and advice locally and to other GKN sites concerning the impact of REACh. Preparing and defining tests/test plans; critical and systematic interpretation and analysis of test data, applying the outcome of tests for substantiation of specification changes. Troubleshooting and production support on Materials Issues (e.g. Composites, polymers, bonding, surface treatments). Maintaining contacts with suppliers regarding alternative/new products. Contribute to the development of GKN as a 'great place to work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Composite or Polymer Materials Science based Degree (or related) Experience in Polymer and Composite material science and processing; familiarity with REACh environmental legislation Significant relevant experience within an industrial engineering discipline, preferably within an Aerospace/Automotive/Marine/Energy sectors Experience with quality systems, specifications, standards, etc. with the ability to oversee the broader field Excellent reporting and project management skills Good English language, both verbally and in writing, Desirable: Ability to plan work through formal project management processes, including scheduling and budgeting and lead a team to ensure successful delivery of required outcomes. An awareness of aerospace certification requirements. A higher degree qualification such as a Masters, PhD or EngD within Aerospace/Automotive/Marine/Energy sectors The successful candidate should have a broad interest in non-metallic material technologies & testing and characterisation techniques. You should want to mentor people in a technical environment. Youll be able to adapt to changing priorities to meet business priorities handling multiple enquires at once. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders, including operations and other business functions. The successful candidate should be adaptable in their approach to work, and be able to adapt to potentially dynamic priorities. As a Principal Materials Engineer , the candidate will be naturally curious and seek to increase/deepen their own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

World Class Defence Organisation is currently looking to recruit a remote PERL Software Engineer subcontractor on an initial 6 month contract. Job Title: PERL Software Engineer Rate: £77 - £84 per hour Location: Stevenage Hybrid / Remote working: This role is a remote based role – with just 1 visit to the Stevenage site per month. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) PERL Software Engineer Job Description: The Software department are looking for a software developer with experience in the PERL programming language. We require someone who can create and update text-based templates used in Technical Publications authoring and publishing tasks. Knowledge of the Technical Publications publishing process would be an advantage but not a requirement. Assistance in updating and in some cases, creating applications and reporting tools using C# , SQL, Java and PowerShell and possibly across different coding domain languages. Responsibilities: Code technical publication stylesheets using PERL language Develop database solutions to store and retrieve company information Install and configure information systems to ensure functionality Analysing, planning, and defining data architecture framework, including security, reference data, metadata, and master data Migrate data from legacy systems to new solutions Improve system performance by conducting tests, troubleshooting and integrating new elements Optimize new and current database systems Define security and backup procedures Collaborating with other teams within the organisation to devise and implement data strategies, build models, and assess shareholder needs and goals Provide operational support for Management Information Systems Requirements and skills: Proficiency in PERL is essential Proficiency in SQL and C# Experience with data visualization is highly desirable. Proficiency in MS Excel Experience in data modelling, metadata management, data synthesis Experience gathering and analyzing system requirements Proven analytical skills

Perl Developer Certain Advantage are hiring for a Perl Developer based in Stevenage. (Once a month onsite in Stevenage) This role is on an initial 6-month contract basis. The company: We’re working with a leading defence and aerospace organization that designs, develops, and delivers advanced missile systems and related technologies. It supports national and allied armed forces with cutting-edge, integrated solutions across air, land, and sea domains. The role: Code technical publication stylesheets using PERL language Develop database solutions to store and retrieve company information Install and configure information systems to ensure functionality Analysing, planning, and defining data architecture framework, including security, reference data, metadata, and master data Migrate data from legacy systems to new solutions Improve system performance by conducting tests, troubleshooting and integrating new elements Optimize new and current database systems Define security and backup procedures Collaborating with other teams within the organisation to devise and implement data strategies, build models, and assess shareholder needs and goals Provide operational support for Management Information Systems The individual: Proficiency in PERL is essential Proficiency in SQL and C# Experience with data visualization is highly desirable. Proficiency in MS Excel Experience in data modelling, metadata management, data synthesis Experience gathering and analysing system requirements Proven analytical skills Problem-solving attitude Does this sound like your next career move? Apply today. Working with Certain Advantage We go the extra mile to find the best people for the job. If you’re hunting for a role where you can make an impact and grow your career, we’ll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn’t for you, head to (url removed) and register for job alerts and career guidance tips

Do you have excellent (or emerging) clinical diagnostic and interpersonal skills?.Are you motivated to achieve great outcomes for Podiatry patients in Singapore?.If so then come and join our team.An excellent opportunity is available for an enthusiastic, flexible and motivated podiatrist to join our

Join TKMS Atlas UK, a successful and ever-expanding company, in our quest for a System Design Authority (SDA) within our Submarine Systems division. Our SDAs are at the forefront of technical leadership and systems engineering, driving the development of solutions from conceptualization to customer

Do you have excellent clinical, diagnostic and interpersonal skills?.Are you motivated to achieve great outcomes for Podiatry patients in Singapore?.If so then come and join our team.An excellent opportunity is available for an enthusiastic, flexible and motivated podiatrist to join our committed an

Key Responsibilities Contribute to the integration of hardware and software subsystems into cohesive flight simulation systems. An exciting opportunity has arisen for a Systems Engineer, focussed on Integration & Test, to join a team developing advanced flight simulation systems used by pilot train

Service and maintain audio/video intercom systems, including IP-based systems. Control System Engineer Exciting Opportunity for an Access Engineer! This company is seeking a skilled and motivated Access Engineer to join their dynamic team. Key Responsibilities of the Access Engineer: Install,

Working closely with the Business Services Project Manager (Systems Lead) and the Business Services Systems Officers, the Reservations System Project Manager is responsible for providing global operational support and administration of the firms room and desk booking technology, Eptura Engage. This

Key Responsibilities: Executing key systems engineering activities on significant projects Engaging with external and internal stakeholders to ensure customer and business needs are satisfied and issues are mitigated Directing technical documentation in support of work carried out Delivering work a

As a Senior Systems Engineer, you will take system-level ownership of sophisticated, high-precision products that combine advanced optics, laser-based processes, motion systems, controls, software and machine vision. You are likely to be an experienced systems engineer with a strong background in ph

I am seeking a proactive IT Systems Analyst with experience in Epicor BisTrack and strong SQL skills to support my client’s core business systems. Support system integrations and data workflows across the business. A desire to improve systems, processes, and efficiency.

Experience in designing and commissioning safety automation and control systems for marine and/or hazardous environments. Control System Engineer Key Responsibilities. Design control system circuits and documentation.

Do you have experience across the full systems lifecycle?. As the Systems Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. Experience of systems engineering lifecycle.

Overarching responsibility for the design and quality of the system level specifications, architecture, and detailed designs of the sub-system/system. Responsible for overall system architecture and the corresponding assignation of system functions to sub-functions or sub-systems. Responsible for th

Program advanced PLC, HMI, and SCADA systems while producing essential technical documentation like manuals and test procedures. Attend meetings with customers and internal teams, offering expertise in system design, documentation, and troubleshooting. Follow project schedules set by the Systems Eng

Solid understanding of automation and control systems. JOB TITLE: Control Systems Engineer. Designing and developing control systems for industrial automation projects.

Focused on the installation of CCTV, access control, intruder alarm, and perimeter security systems, along with fault finding and general system support. Focused on system commissioning, configuration, integration, and final handover of security systems across complex projects. Fault diagnosis acros

We are working with a highly established, award-winning control system integrator to recruit a Control System Engineer with a strong electrical design bias. Multi-Award-Winning Control System Integrator. Electric Design (varied incoming distribution along with exp of change over systems).

TCS provides engineering solutions and services for Aero Engine Control System and Software to a prominent customer who is a world leader in power and propulsion systems. As a Control System Engineer, you will be the owner of assigned control system functions and interfaces. Develop electronic contr

You will be configuring and implementing pension administration systems by translating client requirements into accurate system setup and robust automated calculations. Familiarity with system setup, parameters and pension administration systems. Undertaking system demonstrations where required.

This is a great opportunity for someone with strong BisTrack knowledge who enjoys working closely with business users, solving system issues and helping organisations get the most out of their ERP. Troubleshooting system issues and resolving tickets. Supporting system configuration and ongoing impro

Access Coins ERP System Manager. ERP System Administration with at least 2 years focused on Access Coins. In-depth knowledge system configuration, data maintenance / database management and security protocols.

System1 is a The Creative Effectiveness Platform. As a member of the System1 Marketing department you will work alongside our Design Director to influence and help deliver our brand marketing, thought leadership and event experiences. Deliver best-in-class System1 led creative work.

We’re looking for a System Implementation and Support Manager to ensure our digital systems are effectively implemented, optimised, and delivering real value across our care services. You’ll act as the link between operational teams, systems, and governance—supporting implementation, improving

We are looking a GIS specialist to join our team in in the West Midlands.GIS Specialists - Defence and Security.Are you a tech-savvy GIS specialist eager to contribute to our nation's defence and security efforts? Are you ready to immerse yourself in dynamic operational environments where precision

You will act as the subject matter expert for HR systems, combining deep technical expertise with a comprehensive HR background to ensure systems align with best practice, UK employment law, and organisational processes. Deliver training sessions and ongoing support to HR team members, line managers

I’m currently partnering with a leading organisation that is looking to appoint an experienced HR Systems Manager to lead the strategic management and optimisation of their iTrent HR & Payroll system. Manage system access controls, workflows, and approval structures. HR Systems Manager – iTrent

Do you have excellent clinical, diagnostic and interpersonal skills?.Are you motivated to achieve great outcomes for Podiatry patients in Singapore?.If so then come and join our team.An excellent opportunity is available for an enthusiastic, flexible and motivated podiatrist to join our committed an

Do you have excellent (or emerging) clinical diagnostic and interpersonal skills?.Are you motivated to achieve great outcomes for Podiatry patients in Singapore?.If so then come and join our team.An excellent opportunity is available for an enthusiastic, flexible and motivated podiatrist to join our

Business Development Manager Metal FabricationJob Type: Permanent Location: Leicester Post Code: LE3 1AHSalary: £35,000 - £38,000, Car Allowance, OTE £50,000+, Benefits Start Date: ASAPSector: Metalwork, Metal Fabrication, Sheet Metalwork, Manufacturing As Business Development Manager Metal Fabri

System Integrator (PLC Programming)Dungannon NI£70,000 - £80,000 + Progression + Training + Company Benefits Are you a PLC Programmer or similar that wants to work on critical infrastructure vehicles projects for an industry leader that has a best in class staff retention?Do you want to work on ex

HRIS System Integration Engineer Location: Hybrid (2 days travel to their offices in Hemel Hempstead) Contract: Outside IR35 Day rate: Up to £600 per day Duration: Initial 3 months but will most likely extend Start date: ASAP Key words: ElementSuite, Integration, API, Dataflows We are looking for

Digital System Owner - Care Management SystemAn exciting opportunity to join Certitude as a Digital System Owner Care Management System, as we continue to grow.

Auditor Integrated Management System Shift Times: Monday - Friday 37 Hours (Hybrid working available)Pay Rate: £240 per day Location: Bridgwater TA6 4FJJob OverviewThe Integrated Management System (IMS) Auditor supports the IMS & Audit Manager in maintaining the Hinkley Point C (HPC) integrated ma

Maintenance Plumber (Renewable System Training)Inverness (Field Based)£37,500 - £47,500 + Company vehicle + Un-capped Overtime + Company Benefits + Renewable Energy TrainingAre you a Maintenance Plumber or similar looking for a role at a well-established, family-run facility management company cur

Our OfferSub System Design LeadPermanentOn site 4-5 days for first 3 months then relaxed£60,000 - £65,000 Key TasksPrimary role will be OBDH sub-system role working with project core team and/or product owners within the SSTL matrix structure with projects - Typical duties include: Evaluation of

Power System Studies Engineer (PSCAD) - Bristol Aurora Power Consultancy is currently seeking an experienced Power System Studies Engineer to join their growing team in either their Bristol or Manchester office.

CWDerby / GrangemouthJoin Our Team as a System Integration EngineerAre you passionate about delivering innovative control system solutions and eager to work on impactful infrastructure projects? As a System Integration Engineer, you will play a critical role in designing, developing, testing, and co

JOB PURPOSE, ACTIVITIES AND TASKS - The Wildcat HUMS Controller is responsible to the RNAS Yeovilton Wildcat MTP for the provision of Wildcat Vibration analysis (VA) and Wildcat Health Usage Monitoring System (HUMS) support through control of the Vibration Health Usage Cen.