Offres 1st shift à Anaheim, CaliforniaCréer des alertes d'emploi

Job Description Summit Interconnect - Anaheim is currently has an open position for Lamination Operator (1st shift). Summit Interconnect is a manufacturer of advanced technology printed circuit boards with a specific focus on complex rigid and rigid-flex product with unique expertise in RF/Microwave applications. Position Summary: Knowledge of Summit Traveler and stack up sheet. Check material availability. Check stack up that core layers match. Review prior runs for any changes that may have been made. Clean plates and separators for lay-up room. Operator may have to oxide layers, if personnel are not available. Lay-up layers and book panels for lamination. Every panel must be identified according to work order and tool number. Books will be loaded into the press to the right recipe and unloaded/breakdown books is personnel is not available. Qualifications: To perform this job successfully, an individual must have a minimum of one (1) year experience in the printed circuit board industry and must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Responsibilities: • Lay-up and press rigid panels., • Ensure quality of panels., • Performs other department or company-related tasks at the direction of the department Supervisor. Education and Skills: • High School Diploma or equivalent., • Minimum one (1) year prior PCB experience., • Ability to communicate with managers and supervisors., • Good concentration must be able to remain focused with minor interruptions. Physical Demands: • This position requires the individual to perform for the entire shift while standing., • Must be able to lift 40 lbs. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Manufacturing Operator position offers a great entry point into a high-tech manufacturing environment. In this role, you will be trained to perform a variety of hands-on tasks in the production of printed circuit boards. You'll contribute to the quality and precision that define Pioneer Circuits' products while gaining experience/exposure across different areas of the manufacturing process, from warehouse and material issue, to operating manufacturing machines and conducting quality inspections. If you're reliable, eager to learn, and excited about working on products that support national security and space exploration—this is the opportunity for you. Based on your skills, experience, and interests, you'll be matched to a specific manufacturing role within our operations. What You'll Do: • Assist in the production, assembly, inspection, or testing of circuit board components, • Follow detailed work instructions, procedures, and safety guidelines to complete assigned tasks, • Operate manual or semi-automated equipment depending on role placement, • Handle materials and components carefully to ensure product quality, • Maintain cleanliness and organization of the work area, • Work with team members and management to meet production goals and timelines, • Learn and apply quality standards and process controls, • Perform basic documentation of completed tasks or inspection results, • Participate in cross-training opportunities to learn new skills across departments What You'll Bring: • A willingness to learn and grow in a high-tech manufacturing environment., • Ability to have reliable attendance and be consistently on time for scheduled shifts. Punctuality and dependability are essential to meet production goals and maintain workflow., • Strong attention to detail and ability to follow instructions precisely., • Good manual dexterity and hand-eye coordination., • Dependability, a positive attitude, and a strong work ethic., • Ability to work independently and as part of a team., • High school diploma or GED required., • Prior manufacturing or warehouse experience is a plus but not required—we provide training!, • Ability to read, write, and communicate effectively in English., • Comfortable working in a production environment with standing, walking, or sitting for extended periods. Schedule: • Positions are offered on one of these shifts:, • 1st shift (7:30 am- 4:00 pm), • 2nd shift (4:00 pm-12:30 pm), • 3rd shift (12:30 am-7:30 am), • Monday to Friday, • Overtime as needed, • Weekends as needed Job Type: Full-time, On-Site Only The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job DescriptionDescription: AdvancedPCB, a printed circuit board (PCB) manufacturer, is seeking a reliable, motivated Imaging Operator to join our growing company. The ideal candidates must be able to work in a fast-paced, team environment, show a true sense of urgency, and be willing to cross-train. Dry film photoresist is the key component used in the image transfer process. It is widely used in precision etching and electroplating products such as Printed Circuit Boards. The Imaging Technician will perform all aspects of this process. Essential Job Function: • Operate all department equipment, quality checks, preventative maintenance and minor repairs, • Enter jobs into the manufacturing tracking system, • Read and interpret shop order to verify that all previous operations were completed, to verify count and to verify quality, • Maintain a safe, neat, and organized workplace Work Schedule: This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is Monday through Friday, 6:00 am to 2:30 pm. Requirements: Essential Qualifications, Education and Experience: • High school diploma or equivalent, • 1 year of PCB manufacturing experience or similar manufacturing related industry Preferred Additional Skills: • Ability to read, write and communicate in English., • Ability to stand 8-12 hours throughout the shift., • Ability to lift 30 pounds without straining. Physical Requirements: • Prolonged periods sitting and performing visual and manual tasks., • Fine Motor Skills, • Ability to use microscopes for long periods of time performing job duties. Compensation/Benefits: California Pay Range: $19.00 - $25.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Advanced PCB offers a variety of health and benefit programs. Which include Medical, Dental, Vision Insurance, HSA plans, Hospital and Accident plans, Life Insurance, PTO, Matching 401k, and Paid Holidays. About AdvancedPCB APCT, Advanced Circuits and San Diego are now unified as AdvancedPCB. Though the name is new, our commitment to our customers has remained unchanged. AdvancedPCB is the most comprehensive provider of printed circuit board solutions in the country. As a result of the combination of the capabilities of APCT, Advanced Circuits and San Diego PCB, AdvancedPCB offers competitive products for applications both large and small, and every interaction will be infused with our core belief that customer centricity is key. Today, more than 40 years after our founding, we are proud to be the nation’s leader in printed circuit board solutions, offering full-scale design, fabrication and assembly, consistently faster than the industry standard. We take pride in offering full-service solutions that meet the unique demands of any PCB customer need, while providing best-in-class customer service at every touchpoint. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us! https://www.advancedpcb.com/en-us/

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity: The Assembly Potting Operator performs a wide variety of electrical/mechanical product assembly operations on components, assemblies or subassemblies. What You'll Do: • Prepares assembly work by reviewing various documents including production work orders, manufacturing and process specifications, engineering drawings and schematics, • Works with masking and unmasking materials in preparation for process, • Performs conformal coating and potting What You'll Bring: • Ability to fluently read, write and speak English, • Attention to detail and accuracy, • Ability to work well under pressure, • Excellent communication and interpersonal skills, • Experience working with chemicals and solvents in a manufacturing or assembly environment, • High level of flexibility and adaptability to changing requirements and priorities, • Ability to effectively problem solve Added Bonus If You Have: • 1 year of soldering or potting experience in a manufacturing environment (Preferred) Schedule: • Monday to Friday - 1st and 2nd shifts available, • 1st Shift (7:30am to 4:00pm), • 2nd Shift (4:00pm to 12:30am), • Overtime and Weekends as required Job Type: • Full-Time / Permanent, • On SiteCalifornia Pay Range$17—$20 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Vision insurance 6:00 AM to 2:30 PM Qualifications • High School diploma AND Associate Degree or completed trade school study relevant toward CNC machine manufacturing., • 3 -axis CNC milling machines controls, retrieve and run programs experience, • 3-5+ years experience with close tolerance CNC Milling Machines manufacturing: machine operation, programming, and cutting tool selection and maintenance, • Ability to read and understand blueprints and GD&T experience., • CNC cutting tools (reamers, end mills, boring bars, taps, drills) experience, • Standard Operating Procedures experience, • Measuring equipment experience (micrometers, calipers, gauge pins, go/no-go gauges, etc.)., • Previous race or production engine assembly or rebuilding experience, • Previous Aerospace or Defense industry experience (Deburr, and/or Assembly)Responsibilities:, • Collaborate with Manufacture Engineering to optimize machining processes, • Assist maintenance personnel with the diagnosis and correction of machine tool geometry, • Follow the production schedule and proactively verify machines are configured correctly, • SOPs and drawing set up instructions, load castings & raw materials, • Ensure all machines are running in accordance with the daily published schedule, • Perform required daily maintenance activities on assigned CNC machine, • Coordinate with the QC department to validate part quality from QC reports, • Document machine and automation robot issues, • Retrieve and/or build cutting

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Assembly SMT Operator is responsible for operating, monitoring, and maintaining SMT production equipment used in the assembly of printed circuit boards (PCBs) such as Pick & Place, Screen Printer, AOI, X-Ray machines etc. This role ensures high-quality electronic assemblies by following standard operating procedures, work instructions, and quality requirements. Performs assembly using a combination of SMT and through-hole parts, reworking SMT boards, assembling cables and mechanical assembly of Printed Circuit Assemblies. What You'll Do: • Reads and understands customers drawing(s), SOPs, work instructions, equipment manuals and requirements specified in the manufacturing traveler, • Interpret J-STD and IPC 610 standards for acceptability and customer specifications, • Verifies assembly traveler quantity to final count and notify management in cases of discrepancy, • Verifies correct part numbers being used for the specific job being run, • Performs hand placement as needed, • Monitors the output of machines to ensure quality, • Ensures the quality of product produced on the SMT line (correct parts, polarity, etc), • Uses various SMT tooling, solder paste stencil, PCB fixtures, • Performs rework of SMT components, visual inspection, hand solder and de-solder, • Performs visual inspections of SMT assemblies, • Troubleshoots and perform simple repairs when machines are not functioning properly, • Assists in performing machine preventative maintenance on screen printer and pick and place machines based on assigned schedules., • Performs all other job tasks as needed and assigned What You'll Bring: • Must be able to communicate clearly and effectively in English, • Ability to read and understand customer drawing, requirement, SOPs, work instruction, manufacturing traveler and safety rules, • Knowledge of or previously certified in J-STD-001, IPC-A-610 Acceptability of Electronics Assemblies and ESD control requirement, • Must be familiar with Surface-Mount Technology (SMT) electronic components and SMT assembly process., • Ability to use a microscope, SMT equipment, screen printer, AOI and x-ray machines, • Ability to program, set-up and process the jobs, • Must be proficient in PCB soldering including SMT and thru-hole technology and have familiarity with electronic components., • Ability to use small hand tools including soldering iron, pliers, crimpers, screwdrivers and measuring devices, • Familiarity with different CAD data formats such as Gerber data, • Must be detail-oriented, • Excellent attendance and punctuality, • Near Vision Requirement: 20/20 minimum one eye with corrected glasses or not corrected, • Willing to work overtime as needed Education and Experience: • High School Diploma or General Education Degree (GED) preferred, • Minimum of 2 years of Assembly SMT experience in PCB or electronics manufacturing and assembly industry Please note that in addition to frequent standing and walking, the work environment requires lifting, pushing, pulling, and carrying up to 25 pounds; as well as repetitive hand and finger motion. Schedule: • Monday to Friday, • 1st Shift: 7:30am to 4:00pm, • Overtime and Weekends as required Job Type: Full-time / Permanent California Pay Range$19—$23 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Inner Layer Coating Operator processes inner layers through the Hot Roller Laminator (HRL) Machine. The position ensures that all jobs are processed in accordance with Process Engineering, Team Leader direction, Traveler information and Standard Operating Procedures. Please Note: The available work schedule consists of second-shift hours (4:00pm - 12:30am); however, training will take place during the first shift (7:30am - 4:00pm). What You'll Do: • Reads and interprets work instruction on the traveler to verify customer name, lot number and quantity; confirms that prior process was completed, signed and dated on the traveler, • Operates the Hot Roller Laminator Machine including startup, turn-off, and general maintenance, • Sets up resist coat in accordance with panel size, • Feeds panels through the HRL Machine per Traveler instructions, • Visually inspects panels before and after processing to ensure that there are no non-conformances (e.g., scratches, resist wrinkles and other physical defects), • Performs all other duties as needed What You'll Bring: • Ability to read, write and speak English proficiently, • Ability to read and interpret documents such as travelers, standard operating procedure, instructions and safety rules in English to the degree necessary to perform the job, • Must be detailed oriented and self-motivated, • Must be able to remain focused with minor interruptions, • Excellent attendance and punctuality, • Must be able to work overtime as required Education and Experience: • High School Diploma, GED or comparable industry experience (Preferred), • 1 to 2 years of related experience (Preferred) Please note that in addition to frequent standing and walking, the work environment requires lifting, pushing, pulling, and carrying up to 50 pounds. Schedule: • 2nd shift, 4:00pm to 12:30am, • Monday to Friday, • Overtime, • Weekends as needed **Please Note: Successful candidate must be available to train during 1st Shift (7:30am to 4:00PM) Job Type: • Full-time, • PermanentCalifornia Pay Range$17—$18 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Breakdown Operator is responsible for loading and unloading panels from the oven for the baking process, breaking down books, inserting and removing pins, and operating the flash routing machine to edge off the finished panels. Please Note: The available work schedule consists of second-shift hours (4:00pm - 12:30am); however, training will take place during the first shift (7:30am - 4:00pm). What You'll Do: • Reads and interprets work instructions on the traveler to verify work order number and panel quantity; ensures that all previous processes were completed, signed off and dated on the traveler., • Helps autoclave operator to remove bag from autoclave, • Inserts pins using lam plates and removes all pins after autoclave process; loads and unloads inner layers from the oven, • Wraps, labels and stores lam plates, • Presets flash route machine and loads/unloads panels through it and then bakes panels, • Completes all documents accurately, • Performs other duties as needed What You'll Bring: • Ability to read and interpret documents such as standard operating procedure, instructions and safety rules in English to the degree necessary to perform the job, • Ability to understand and follow all safety codes and requirements., • Must be detailed oriented and self-motivated, • Must be able to remain focused with minor interruptions Education and Experience: • High School Diploma or General Education Degree (GED) preferred, • No experience is required Please note that in addition to frequent standing and walking, the work environment requires lifting, pushing, pulling, and carrying up to 50 pounds; as well as repetitive hand and finger motion. Schedule: • Monday to Friday, • Regular Schedule is 2nd shift 4:00pm to 12:30am, • Training Schedule is 1st Shift (7:30am to 4:00pm) for 2 to 4 weeks, • Overtime, • Weekends as needed **Please Note: Successful candidate must be available to train during 1st Shift (7:30am to 4:00PM) Job Type: Full-time / Permanent / On-site California Pay Range$17—$18 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Kitting Operator reviews the Traveler for accuracy and prepares material for processes based on Traveler instructions, Lamination Lay-Up sheets and team leader directions. What You'll Do: • Reads and understands Traveler, SOPs and Lamination Lay-Up sheet, • Records and visually verifies material supplier, lot number, issue quantity on lot traveler and expiration date and records on the Material Log, • Verifies material certification with the Traveler, • Cuts and prepares material with appropriate paperwork to release to appropriate department, • Performs all other job tasks as needed What You'll Bring: • Ability to read, write and speak English proficiently, • Ability to read and understand documents such as standard operating procedure, Lamination Lay-Up sheet, Traveler instructions and safety rules in English to the degree necessary to perform the job, • Ability to work with strict deadlines, • Must be detail-oriented, efficient and organized, • Must be able to work overtime as required Education and Experience: • High School Diploma or GED (Preferred), • Minimum of 1 year of experience in rigid, flex and rigid flex printed circuit and manufacturing industry (Preferred) Please note that in addition to prolonged standing and walking, the work environment requires lifting, pushing, pulling, and carrying up to 20 pounds; as well as repetitive hand motion. Schedule: • 1st Shift (7:30am to 4:00pm), • Monday through Friday, • Overtime and Weekends as needed Job Type: On site, Full-Time/Permanent California Pay Range$17—$19 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job Description IDEAL TRIDON The Ideal Tridon Group comprises a family of brands that support, secure, and connect the movement of air, fluid, and electricity in critical applications. With over 100 years of proven quality and a strong culture of service, we are the worldwide leader in clamps, strut, hose supports, conduit, fittings, and coupling solutions. Our products are engineered to meet the highest standards across a range of industries, and our commitment to innovation, reliability, and customer support ensures we’re ready to meet the demands of today and tomorrow. At the Ideal Tridon Group, connections aren’t just what we make—they’re the heart of everything we do. We are seeking Roll Mill Operators on 1st shift for our Garden Grove plant. Position Summary: Work in a non-climate-controlled manufacturing setting that may include dust and debris and can be loud at times. Perform various tasks involved in Roll Mill operation including but not limited to setting up and operating machines, handling parts and materials, packing parts and other related activities using hand tools, various type of packing materials. Must follow all applicable safety procedures to avoid injuries including requests for help from co-workers. Proper handling of finished parts and products to avoid injuries or damage, follow all operational instructions when operating or using tools and equipment. Provide quality checks as determined. Job may require overtime and a flexible schedule, reporting early and working late, including weekends. Shift: 1st 6:00am - 2:30pm Schedule: Monday-Friday Responsibilities: • Sets up and operates a production machine in accordance with established procedures and guidelines., • Uses computer-controlled equipment to select position and secure automatic or semi-automatic machines., • Controls and adjusts machine settings to complete more complex tasks., • May assist with training other machine operators., • May calculate and assist with numeric controlled programming., • Typically reports to a supervisor/manager Job Requirements: • Excellent verbal communication skills with strong aptitude for operating machinery., • Ability to follow instructions and learn the production process., • Excellent organizational skills and attention to detail., • Excellent time management skills., • Ability to perform repetitive tasks. Education and Experience Requirements: • High School Diploma or equivalent is required., • Hi-Lo Certification preferred, will be trained and certified on the hi-lo., • (2) years of solid experience in a manufacturing environment., • Must be able to clear drug screen and background check., • Must have reliable transportation. Physical Needs and Work Environment: The ideal candidate must be able to complete all physical requirements of the job with or without a reasonable accommodation as you will frequently and repetitively be required to bend, twist, kneel, crouch, and reach to perform work, use hands to finger, handle, or feel; and talk and hear. The employee is regularly required to stand, walk and/or sit and reach with hands and arms. May occasionally climb stairs, drive vehicles, and operate equipment. Lift or carry materials weighing up to 50 lbs. Must wear required hearing and/or eye protection. NOTE: All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. An Equal Opportunity Employer We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated Wet Process Operator (Sander) who is looking for an exciting and rewarding opportunity. The ideal candidate must be able to work in a fast-paced environment and show a true sense of urgency. Essential Job Functions • Perform job related tasks as instructed by supervisor., • Maintain a clean, safe, and organized work environment., • Read and understand applicable Process Procedures and safety rules., • Perform any other tasks assigned by management., • Wet sand by hand using grit sand paper., • Set up and operate Jitterbug and Mass Semi-automatic with minimal supervision., • Use measuring devices such as eye loops and microscopes., • Visually inspect panel’s quality and make required adjustments., • Discontinue processing when a non-conforming condition is found and report it to management., • Perform all tasks and routine maintenance as required by Process Procedure., • Accurately complete all departmental quality and lot tracking documentation., • Assist other operators, when time allows. Work Schedule: This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is 1st Shift | Monday through Friday, 6:00 am - 2:30 pm. Requirements: Essential Qualifications • High School diploma or equivalent., • Able to work overtime, including weekends and holidays, as required, in support of departmental and company goals. Preferred Additional Skills: • Able to read, write and communicate in English., • Excellent work ethics, detail oriented and self-motivated., • Be a team player and work well with others., • Able to wear personal protective equipment (PPE), as required by work area., • Able to safely work with chemicals., • Able to work with minimal supervision., • Flexible and willing to cross-train in other areas. Physical Requirements: • Ability to consistently lift 25 pounds., • Able to repeatedly walk approximately 20 feet to load/ unload etcher., • Able to walk-in uneven flooring., • Able to work with chemicals. Compensation/Benefits: California Pay Range: $19.00 - $24.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Advanced PCB offers a variety of health and benefit programs. Which include Medical, Dental, Vision Insurance, HSA plans, Hospital and Accident plans, Life Insurance, PTO, Matching 401k, and Paid Holidays. About AdvancedPCB APCT, Advanced Circuits and San Diego are now unified as AdvancedPCB. Though the name is new, our commitment to our customers has remained unchanged. AdvancedPCB is the most comprehensive provider of printed circuit board solutions in the country. As a result of the combination of the capabilities of APCT, Advanced Circuits and San Diego PCB, AdvancedPCB offers competitive products for applications both large and small, and every interaction will be infused with our core belief that customer centricity is key. Today, more than 40 years after our founding, we are proud to be the nation’s leader in printed circuit board solutions, offering full-scale design, fabrication and assembly, consistently faster than the industry standard. We take pride in offering full-service solutions that meet the unique demands of any PCB customer need, while providing best-in-class customer service at every touchpoint. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us! https://www.advancedpcb.com/en-us/

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated Etching Operator to join our growing company. Essential Job Function: Etch I (Entry level) • Perform job related tasks as instructed by supervisor., • Maintain a clean, safe, and organized work environment., • Maximize productivity by maintaining a constant load on conveyor., • Read and understand applicable Process Procedures and safety rules., • Perform any other tasks assigned by management. Work Schedule: This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is 1st Shift | Monday through Friday, 6:00 am - 2:30 pm. Requirements: Essential Qualifications, Education and Experience: • High School Diploma or Equivalent, • Minimum of 1 years’ experience and knowledge of PCB drilling. Preferred Additional Skills: • Excellent organizational and leadership skills., • Able to effectively communicate with management and supervisory staff., • Able to read, write and communicate in English., • Excellent work ethics, detail oriented and self-motivated., • Be a team player and work well with others., • Able to wear personal protective equipment (PPE), as required by work area., • Able to safely work with chemicals., • Able to work overtime, including weekends and holidays, as required, in support of departmental and company goals. Physical Requirements: • Ability to consistently lift 25 pounds., • Able to repeatedly walk approximately 20 feet to load/ unload etcher., • Able to walk-in uneven flooring., • Able to work with chemicals. Compensation: California Pay Range: $19.00 - $24.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. About AdvancedPCB AdvancedPCB, with over 40 years of experience, is a leading manufacturer of high-reliability printed circuit boards. The company features six manufacturing sites: Aurora, Colorado, our headquarters, Santa Clara, two in Southern California, Maple Grove, Minnesota, and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Advanced PCB offers Medical, Dental, Vision Insurance as well as 401K. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us! https://www.advancedpcb.com/en-us/

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Autoclave Operator sets up and operates autoclaves/ovens and auxiliary equipment to cure and bond metallic and non-metallic parts and assemblies in accordance with Team leader direction, Traveler information, work instructions and Standard Operating Procedures. Please Note: The available work schedule consists of second-shift hours (4:00pm - 12:30am); however, training will take place during the first shift (7:30am - 4:00pm). What You'll Do: • Reviews SOPs, work instructions, Team leader direction and the Traveler to ensure compliance with specifications; verifies that prior process was properly completed and that quantities match; scans job into PROCIM to ensure compliance with specifications, • Reviews Process Analysis Log and signs off before starting shift, • Adjusts manual controls to regulate and activate autoclave power supply, colling system, and pressure gauges, • Monitors instruments, switches, records, and listens for warning signals during autoclave operation to ensure conformance to specifications, • Modifies and/or aborts process as required or needed, • Operator is responsible for checking autoclave cooling, • Signs off on the Traveler, logs out in ProCIM and moves finished parts to the next scheduled process, • Perform other duties as required What You'll Bring: • Ability to read, write and speak English proficiently, • Ability to read and understand documents such as travelers, standard operating procedure, instructions, and safety rules in English to the degree necessary to perform the job, • Must be detailed oriented and self-motivated, • Must be able to remain focused with minor interruptions, • Time management, including good attendance and avoidance of regular tardiness, • Must be able to work overtime as required Education and Experience: • High School Diploma or General Education Degree (GED) preferred, • No experience is required Please note that in addition to frequent standing and walking, the work environment requires lifting, pushing, pulling, and carrying up to 50 pounds; as well as repetitive hand motion. Schedule: • Monday to Friday, • Regular Schedule is 2nd shift 4:00pm to 12:30am, • Overtime, • Weekends as needed **Please Note: Successful candidate must be available to train during 1st Shift (7:30am to 4:00PM) Job Type: Full-time California Pay Range$17—$19 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Talent4Health is seeking a travel nurse RN Infusion for a travel nursing job in Orange, California. Job Description & Requirements • Specialty: Infusion, • Discipline: RN, • Start Date: 06/30/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel CHEMO CERT REQUIRED FOR THIS POSITION OP ONC EXPERIENCE REQUIRED 1ST TIMERS ACCEPTED ONLY WITH CHEMO CERT AND 2+ YEARS OF EXP About Talent4Health A leader and innovator, offering comprehensive talent solutions for the healthcare industry across the nation. Talent4Health, based in Wilmington, DE is a one stop solution that offers access to an inclusive network of excellent healthcare professionals through its state-of-the-art recruitment strategies and extensive career opportunities. We have successfully placed over 3000 plus clinicians with the topmost healthcare facilities across 50 states in the US. With countless prestigious clients under our umbrella, backed up by passionate and hard-working recruiters, we are a team you have been looking for! Why Choose us? When it comes to choosing a recruitment agency, it’s imperative to consider what all they have to offer. • Proficiency: Our seasoned team of professionals has years of experience and we are dedicated to provide the highest quality service to our clients and candidates., • Personalized service: We understand that every candidate is unique, and we work closely with each one to develop a customized plan that meets their specific needs., • Consistency: We are devoted to offer dependable recruitment solutions for our candidates, and we are always a phone call away for all their questions or concerns., • Comprehensive care: Our healthcare recruitment team works for different specialties, so there is a job for everyone. If this is all that excites you, do visit http://www.talent4health.com today!

Bestica is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Orange, California. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Labor and Delivery 3205.740000.27477 – L&D RN *NO FIRST TIME TRAVELERS, HARD STOP, DO NOT SCREEN *2 YEARS OF EXP REQUIRED, HARD STOP, DO NOT SCREEN ALL SKILLS AND CERTS REQUIRED, HARD STOP MUST BE ABLE TO CIRCULATE MUST BE ABLE TO PERFORM STERILE VAGINAL EXAMS EXPERIENCE IN LARGE HOSPITAL SETTINGS HIGHLY PREFERRED AO WEEKENDS MAY EXCEED EVERY OTHER TO ACCOMODATE UNIT NEEDS SCHEDULING REQUESTS DUE TO OUTSIDE EMPLOYMENT WILL NOT BE CONSIDERED TRAVEL PAIRS WILL NOT BE CONSIDERED Local Radius is 50 miles - please reach out to AM for local rate L&D RN Start: ASAP Shift: 3x12 Day Hours: 07:00-19:30 Certs: BLS, ACLS, NRP, AWHONN Intermediate required, AWHONN Advanced preferred. Must be able to circulate 2 years experience required- HARD STOP 1st Time Travelers: NO HARDSTOP Pending License accepted: No Travel Pairs: NO ACLS, AWHONN Advanced*, AWHONN Intermediate, BLS, Can accept NCC EFM Cert in place of Int AWHONN, NRP 3346074 About Bestica We are a trusted provider of solutions in Information Technology and Healthcare sectors to the DoD, Federal and Commercial markets. Our guiding principle and core values help us care for our people and the community; and build a culture of excellence which in turn helps us achieve our organizational objective of exceeding customer’s expectations in each and every project. Headquartered in San Antonio, TX, we were founded in 2005 and are certified as an 8(a) Business. Benefits • Referral bonus

Solomon Page is seeking a travel RDN - Registered Dietitian Nutritionist for a travel job in Orange, California. Job Description & Requirements • Specialty: RDN - Registered Dietitian Nutritionist, • Discipline: Allied Health Professional, • Start Date: 07/06/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Our client is looking to add a Dietition to their team. As a Dietition, you will look at dietary needs and develop meal plans for patients. Dietition will act as a counselor to patients and maintain consistent communication with the care team. In this role you will update patient records and documents, ensuring the highest standards of care and procedures are met. \n\n Job Details: \n\n\n\t • Location: Orange, California\n\t, • Duration: 13 Weeks\n\t, • Start Date: 07/06/2026\n\t, • Shift: 3x8 Days\n\n\n Qualifications: \n\n\n\t • Certification from an accredited program\n\t, • Excellent interpersonal skills including patience, empathy, and compassion\n\t, • Effective communication skills, including active listening, writing, speaking and reading comprehension\n\t, • Fast and adaptive problem-solving abilities\n\t, • Ability to stand for long periods of time\n\n\n If you meet the required qualifications and are interested in this role, please apply today. \n\n Why Work with Us \n\n The success of Solomon Page is defined by our people. Healthcare providers are offered a comprehensive benefits program including a robust medical benefits package. Additionally, you are offered access to dental and vision coverage, commuter benefits, a 401(k) plan, flexible spending, referral bonuses, ongoing training, and more. Finally, as an ESOP company, Solomon Page offers an employee stock ownership plan to all consultants. As a member of our provider community, you will join a nurturing culture that fosters your career goals. \n \nAbout Solomon Page Healthcare & Medical Staffing \n\n Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides ourselves in developing long-term relationships with healthcare providers based on trust and respect. Our experienced Healthcare and Medical Staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com and connect with Solomon Page on Instagram, Facebook, Twitter, LinkedIn, and TikTok. \n\n 443283 Solomon Page Job ID #443283. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: dietitian | orange, california About Solomon Page Founded in 1990, Solomon Page has grown to be a leader in the staffing industry. As a member of our healthcare provider community, you will join a nurturing culture that fosters your career goals. We have the network and resources to connect you with your next opportunity – whether it is in your hometown, or you are looking to travel to a new destination. Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides itself in developing long-term relationships with healthcare providers based on trust and respect. Headquartered in New York with offices throughout the United States our experienced healthcare and medical staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com/healthcare and connect with us on Facebook, Twitter, Instagram, Tik Tok, and LinkedIn. • ReviveHealth Virtual Care: Available immediately. Receive free, 100% company paid, virtual care access. Upon commencement of your employment, Solomon Page offers automatic enrollment into ReviveHealth, which offers concierge, membership-based access to virtual primary care, urgent care, mental health therapy, a vision program, and prescription medications., • Medical Coverage: Available immediately. Whether you are looking to enroll in single or family insurance, you have immediate access to quality coverage., • Dental Coverage: Available the 1st of the month after your hire date. We offer dental insurance to you and your dependents., • Vision Coverage: Available the 1st of the month after your hire date. We offer vision insurance to you and your dependents., • Commuter Benefits: Available the 1st of the month after your hire date. Set aside pre-tax money to pay for public transportation., • 401K Plan: Associates can enroll in the 401K plan after they have worked 1000 hours., • ESOP Benefits: As an ESOP company, Solomon Page offers an employee stock ownership plan., • Referral Bonus: A cash bonus is offered for referring a candidate to Solomon Page who gets placed., • Training & Support: Training programs and ongoing career coaching and support is offered to consultants.Benefits, • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan, • Referral bonus

Solomon Page is seeking a travel Nuclear Medicine Technologist for a travel job in Orange, California. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 06/30/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Our client is looking to add a Nuclear Medical Tech to their team. As a Nuclear Medical Tech, you will operate nuclear detection equipment and perform scans under the direction of the imaging supervisor. Nuclear Medical Techs will collaborate with team members to update patient records and schedules. \n\n Job Details: \n\n\n\t • Location: Orange, California\n\t, • Duration: 13 Weeks\n\t, • Start Date: 06/30/2026\n\t, • Shift: 5x8 Days\n\n\n Qualifications: \n\n\n\t • Advanced degree from an accredited program\n\t, • Excellent teamwork and collaboration skills\n\t, • Excellent interpersonal skills including patience, empathy, and compassion\n\t, • Effective communication skills, including active listening, writing, speaking and reading comprehension\n\t, • Fast and adaptive problem-solving abilities\n\n\n If you meet the required qualifications and are interested in this role, please apply today. \n\n Why Work with Us \n\n The success of Solomon Page is defined by our people. Healthcare providers are offered a comprehensive benefits program including a robust medical benefits package. Additionally, you are offered access to dental and vision coverage, commuter benefits, a 401(k) plan, flexible spending, referral bonuses, ongoing training, and more. Finally, as an ESOP company, Solomon Page offers an employee stock ownership plan to all consultants. As a member of our provider community, you will join a nurturing culture that fosters your career goals. \n \nAbout Solomon Page Healthcare & Medical Staffing \n\n Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides ourselves in developing long-term relationships with healthcare providers based on trust and respect. Our experienced Healthcare and Medical Staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com and connect with Solomon Page on Instagram, Facebook, Twitter, LinkedIn, and TikTok. \n\n 448555 Solomon Page Job ID #448555. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: nuclear medical tech - radiology | orange, california About Solomon Page Founded in 1990, Solomon Page has grown to be a leader in the staffing industry. As a member of our healthcare provider community, you will join a nurturing culture that fosters your career goals. We have the network and resources to connect you with your next opportunity – whether it is in your hometown, or you are looking to travel to a new destination. Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides itself in developing long-term relationships with healthcare providers based on trust and respect. Headquartered in New York with offices throughout the United States our experienced healthcare and medical staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com/healthcare and connect with us on Facebook, Twitter, Instagram, Tik Tok, and LinkedIn. • ReviveHealth Virtual Care: Available immediately. Receive free, 100% company paid, virtual care access. Upon commencement of your employment, Solomon Page offers automatic enrollment into ReviveHealth, which offers concierge, membership-based access to virtual primary care, urgent care, mental health therapy, a vision program, and prescription medications., • Medical Coverage: Available immediately. Whether you are looking to enroll in single or family insurance, you have immediate access to quality coverage., • Dental Coverage: Available the 1st of the month after your hire date. We offer dental insurance to you and your dependents., • Vision Coverage: Available the 1st of the month after your hire date. We offer vision insurance to you and your dependents., • Commuter Benefits: Available the 1st of the month after your hire date. Set aside pre-tax money to pay for public transportation., • 401K Plan: Associates can enroll in the 401K plan after they have worked 1000 hours., • ESOP Benefits: As an ESOP company, Solomon Page offers an employee stock ownership plan., • Referral Bonus: A cash bonus is offered for referring a candidate to Solomon Page who gets placed., • Training & Support: Training programs and ongoing career coaching and support is offered to consultants.Benefits, • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan, • Referral bonus

Solomon Page is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Orange, California. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 06/30/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Our client is looking to add a Registered Nurse to their team. \n\n Job Details: • Location: Orange, California, • Duration: 13 Weeks, • Start Date: 06/30/2026, • Shift: 3x12 Nights, • Estimated Gross Weekly Pay: 2555\n\n Qualifications: \n\n\n\t • Current California license\n\t, • Excellent interpersonal skills including patience, empathy, and compassion\n\t, • Effective communication skills, including active listening, writing, speaking and reading comprehension\n\t, • Fast and adaptive problem-solving abilities\n\t, • Ability to stand for long periods of time\n\n\n If you meet the required qualifications and are interested in this role, please apply today. \n\n Why Work with Us \n\n The success of Solomon Page is defined by our people. Offering a comprehensive benefits package, travel nurses have immediate access to medical coverage and ReviveHealth virtual care. Additionally, you are offered access to dental and vision coverage, commuter benefits, a 401(k) plan, flexible spending, referral bonuses, ongoing training, and more. As an ESOP company, Solomon Page offers an employee stock ownership plan to all consultants. As a member of our traveler community, you will join a nurturing culture that fosters your career goals. Solomon Page can connect you with your next opportunity – whether it is in your hometown, or you are looking to travel to a new destination. \n\n About Solomon Page Healthcare & Medical Staffing \n\n Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides ourselves in developing long-term relationships with healthcare providers based on trust and respect. Our experienced Healthcare and Medical Staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com and connect with Solomon Page on Instagram, Facebook, Twitter, LinkedIn, and TikTok. \n\n Solomon Page Job ID #452040. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: nurse - rn - labor and delivery / l&d | orange, california About Solomon Page Founded in 1990, Solomon Page has grown to be a leader in the staffing industry. As a member of our healthcare provider community, you will join a nurturing culture that fosters your career goals. We have the network and resources to connect you with your next opportunity – whether it is in your hometown, or you are looking to travel to a new destination. Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides itself in developing long-term relationships with healthcare providers based on trust and respect. Headquartered in New York with offices throughout the United States our experienced healthcare and medical staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com/healthcare and connect with us on Facebook, Twitter, Instagram, Tik Tok, and LinkedIn. • ReviveHealth Virtual Care: Available immediately. Receive free, 100% company paid, virtual care access. Upon commencement of your employment, Solomon Page offers automatic enrollment into ReviveHealth, which offers concierge, membership-based access to virtual primary care, urgent care, mental health therapy, a vision program, and prescription medications., • Medical Coverage: Available immediately. Whether you are looking to enroll in single or family insurance, you have immediate access to quality coverage., • Dental Coverage: Available the 1st of the month after your hire date. We offer dental insurance to you and your dependents., • Vision Coverage: Available the 1st of the month after your hire date. We offer vision insurance to you and your dependents., • Commuter Benefits: Available the 1st of the month after your hire date. Set aside pre-tax money to pay for public transportation., • 401K Plan: Associates can enroll in the 401K plan after they have worked 1000 hours., • ESOP Benefits: As an ESOP company, Solomon Page offers an employee stock ownership plan., • Referral Bonus: A cash bonus is offered for referring a candidate to Solomon Page who gets placed., • Training & Support: Training programs and ongoing career coaching and support is offered to consultants.Benefits, • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan, • Referral bonus

Solomon Page is seeking a travel nurse RN OR - Operating Room for a travel nursing job in Orange, California. Job Description & Requirements • Specialty: OR - Operating Room, • Discipline: RN, • Start Date: 06/30/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Our client is looking to add a Registered Nurse to their team. \n\n Job Details: • Location: Orange, California, • Duration: 13 Weeks, • Start Date: 06/30/2026, • Shift: 5x8 Days, • Estimated Gross Weekly Pay: 2844\n\n Qualifications: \n\n\n\t • Current California license\n\t, • Excellent interpersonal skills including patience, empathy, and compassion\n\t, • Effective communication skills, including active listening, writing, speaking and reading comprehension\n\t, • Fast and adaptive problem-solving abilities\n\t, • Ability to stand for long periods of time\n\n\n If you meet the required qualifications and are interested in this role, please apply today. \n\n Why Work with Us \n\n The success of Solomon Page is defined by our people. Offering a comprehensive benefits package, travel nurses have immediate access to medical coverage and ReviveHealth virtual care. Additionally, you are offered access to dental and vision coverage, commuter benefits, a 401(k) plan, flexible spending, referral bonuses, ongoing training, and more. As an ESOP company, Solomon Page offers an employee stock ownership plan to all consultants. As a member of our traveler community, you will join a nurturing culture that fosters your career goals. Solomon Page can connect you with your next opportunity – whether it is in your hometown, or you are looking to travel to a new destination. \n\n About Solomon Page Healthcare & Medical Staffing \n\n Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides ourselves in developing long-term relationships with healthcare providers based on trust and respect. Our experienced Healthcare and Medical Staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com and connect with Solomon Page on Instagram, Facebook, Twitter, LinkedIn, and TikTok. \n\n Solomon Page Job ID #450559. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: nurse - rn - operating room | orange, california About Solomon Page Founded in 1990, Solomon Page has grown to be a leader in the staffing industry. As a member of our healthcare provider community, you will join a nurturing culture that fosters your career goals. We have the network and resources to connect you with your next opportunity – whether it is in your hometown, or you are looking to travel to a new destination. Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides itself in developing long-term relationships with healthcare providers based on trust and respect. Headquartered in New York with offices throughout the United States our experienced healthcare and medical staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com/healthcare and connect with us on Facebook, Twitter, Instagram, Tik Tok, and LinkedIn. • ReviveHealth Virtual Care: Available immediately. Receive free, 100% company paid, virtual care access. Upon commencement of your employment, Solomon Page offers automatic enrollment into ReviveHealth, which offers concierge, membership-based access to virtual primary care, urgent care, mental health therapy, a vision program, and prescription medications., • Medical Coverage: Available immediately. Whether you are looking to enroll in single or family insurance, you have immediate access to quality coverage., • Dental Coverage: Available the 1st of the month after your hire date. We offer dental insurance to you and your dependents., • Vision Coverage: Available the 1st of the month after your hire date. We offer vision insurance to you and your dependents., • Commuter Benefits: Available the 1st of the month after your hire date. Set aside pre-tax money to pay for public transportation., • 401K Plan: Associates can enroll in the 401K plan after they have worked 1000 hours., • ESOP Benefits: As an ESOP company, Solomon Page offers an employee stock ownership plan., • Referral Bonus: A cash bonus is offered for referring a candidate to Solomon Page who gets placed., • Training & Support: Training programs and ongoing career coaching and support is offered to consultants.Benefits, • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan, • Referral bonus

Prime Staffing is seeking a travel CT Technologist for a travel job in Fullerton, California. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 06/30/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, • Employment Type: Travel ID: 63460324 Shift: Mid 4x10-Hour (15:30 - 02:00) Description: CT Tech CT Scan,3211.768000.27437CLIENT OFFER, PLEASE PROVIDE INTERVIEW AVAILABILITY WITH SUBMISSION IN PACIFIC TIME*MUST HAVE SIEMENS OR PHILLIPS EXP HARD STOP, DO NOT SCREENHospital Exp preferred2YRs experience 1ST Timer accepted only with 3+ years of hospital experience WEEKENDS ARE REQUIRED, MAY EXCEED EVERY OTHER TO MEET UNIT NEEDSCHEDULING PREFERENCES CAN BE CONSIDERED BUT ARE NOT GAURENTEEDSCHEDULING REQUESTS DUE TO ADDITIONAL EMPLOYMENT WILL NOT BE CONSIDEREDLocal Radius is 50 miles - please reach out to AM for local rateStart date: ASAPHospital HighlightsType of Facility: Acute Care HospitalTotal Staffed Beds: 320Scrub Color: RN - Royal Blue L&D/OR: provided LVN - Ceil Blue CNA/PCT/CCT - Wine Unit Secretaries - Chocolate Rehabilitation Aide - Sky Blue Phlebotomists - Turquoise Physical Therapy - Sage OT - Teal Recreational Therapy - Azalea RCP/Imaging Lab/Non-Invasive Cardiology/Radiation Oncology/Material Management - Navy Blue Pharmacy - Olive Green PT Aides - Malibu Speech Therapy - BlackCharting: MeditechParking Cost: Free Parking!" Modified Time:6/30/2026 4:00:00 AM Account Manager: Brittney Wismer Account Manager Email: COVID-19 Vaccine: Not Required Flu Vaccine: Unknown Submittals:Low Job Requirements & Qualifications Previous Charge Experience : - Years of Experience : Patient Ratio Experience : Charting System Experience : - Charting System Name : Community Hospital Experience : - LTAC Experience : - Trauma Level I Experience : - Trauma Level II Experience : - Travel Experience Required : - Certifications : Skills : Adult Acute Care*, Philips, Siemens Unit Details Staffing & Scheduling Scheduling Type : - Patient Ratios Days : - Patient Ratios Nights : - Patient Ratios Weekends : - Float Required : - Call Required : - Weekend Coverage : - Number of Weekend Shifts Per Contract : As needed, may exceed every other. Pre-Approved Time Off : - Orientation Hours : - Facility & Patient Care Details Patient Age Groups : - Daily Census : - Number of Visits Per Day : - Number of Rooms : - Number of Beds : - Additional Unit Information Interdisciplinary Support : - Patient Diagnoses : Willing to work evenings and weekends. Needs Siemens and Philipps experience. We will consider someone with only Siemens or Phillips experience.*MUST HAVE SIEMENS OR PHILLIPS EXP HARD STOP, DO NOT SCREEN Special Procedures/Unit Details : HEAVY PATIENT LOAD - 140 PER 24 HR DAY Special Equipment : - #Tier3 Travel Compliance SSN required DOB required RTO: Aya Offer: 7 Days Client Offer: 7 Days Anything more than 7 Days will potentially delay your offer while we run approval by the client. To minimize turn around please limit total RTO requests. Must commit to working 3 of the 5 holidays (Thanksgiving, Xmas Eve, Xmas Day, NYE, NYD) # of jobs in system we can sub: can only sub to one Providence facility at a time Requires specific amount of exp.: minimum 1 year required Valid State License: CA license must be in hand; does not apply to some allied positions Mile Radius Rule Applies: under 50 miles consider local Local Rules: locals accepted at lower BR Bill rate: firm Background Policy to be noted prior to submission: Must disclose license/BG hits up front at time of submission. No open license hits will be approved. Return Staff Policy: can return after 3 months Must include response to the following from the candidate with submission: Have you ever worked at a Providence facility as a permanent employee, on a travel contract, or as registry/per-diem? If yes, please include location and dates worked. LA fire card within the last 30 days is required (Aya/Facility will not reimburse for this. Recruiters can margin for it accordingly). References Required: 2 References covering 1 year (6 months for CNA s) within the last 3 years during the compliance process and prior to start. Can include Charge RNs/Lead * ALL travelers are expected to float between all facilities within a given state. travelers' refusal to float may result in termination of assignment and/or forfeiture of guaranteed hours. If required for the assignment, Client agrees to supply Providers with communication devices (i.e. cell phone, pager, etc.) needed to perform the duties as assigned at no cost to Provider or Agency. If Client does not provide a mobile phone required for the assignment, Client agrees to pay Agency monthly, for all work-related cell phone use by each Provider, up to a maximum amount of $50.00 as invoiced by Agency. Providers will be responsible for submitting monthly cell phone bill directly to Agency. Modules: Modules are non-billable, average 16 hours spent. Over 20 hours requires PM approval Modules are completed pre-start, and annually Time spent on modules is self-reported, completion is recorded in Workramp transcripts Submittal Details: #Tier3 Travel ComplianceSSN requiredDOB requiredRTO:Aya Offer: 7 DaysClient Offer: 7 DaysAnything more than 7 Days will potentially delay your offer while we run approval by the client. To minimize turn around please limit total RTO requests. Must commit to working 3 of the 5 holidays (Thanksgiving, Xmas Eve, Xmas Day, NYE, NYD)# of jobs in system we can sub: can only sub to one Providence facility at a timeRequires specific amount of exp.: minimum 1 year requiredValid State License: CA license must be in hand; does not apply to some allied positionsMile Radius Rule Applies: under 50 miles consider localLocal Rules: locals accepted at lower BRBill rate: firmBackground Policy to be noted prior to submission: Must disclose license/BG hits up front at time of submission. No open license hits will be approved.Return Staff Policy: can return after 3 monthsMust include response to the following from the candidate with submission:Have you ever worked at a Providence facility as a permanent employee, on a travel contract, or as registry/per-diem? If yes, please include location and dates worked.LA fire card within the last 30 days is required (Aya/Facility will not reimburse for this. Recruiters can margin for it accordingly).References Required: 2 References covering 1 year (6 months for CNA s) within the last 3 years during the compliance process and prior to start. Can include Charge RNs/Lead ALL travelers are expected to float between all facilities within a given state. travelers' refusal to float may result in termination of assignment and/or forfeiture of guaranteed hours.*If required for the assignment, Client agrees to supply Providers with communication devices (i.e. cell phone, pager, etc.) needed to perform the duties as assigned at no cost to Provider or Agency. If Client does not provide a mobile phone required for the assignment, Client agrees to pay Agency monthly, for all work-related cell phone use by each Provider, up to a maximum amount of $50.00 as invoiced by Agency. Providers will be responsible for submitting monthly cell phone bill directly to Agency.Modules:Modules are non-billable, average 16 hours spent. Over 20 hours requires PM approvalModules are completed pre-start, and annuallyTime spent on modules is self-reported, completion is recorded in Workramp transcripts Guaranteed Hours: Contract Weeks:91 Prime Staffing Job ID #37006918. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Allied / Tech:CT Tech,19:00:00-07:30:00 About Prime Staffing At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Solomon Page is seeking a travel CT Technologist for a travel job in Fullerton, California. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 06/30/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, nights, • Employment Type: Travel Our client is looking to add a CT Technologist to their team. As a CT Technologist, you will supply teams with the required images to direct patient care and diagnoses. CT Technologists will explain the CT scan process to patients, while maintaining the highest standards of care and procedures. \n\n Job Details: • Location: Fullerton, California, • Duration: 13 Weeks, • Start Date: 06/30/2026, • Shift: 4x10 Nights, • Estimated Gross Weekly Pay: 2582\n\n Qualifications: \n\n\n\t • Current certification from an accredited nursing program\n\t, • Excellent interpersonal skills including patience, empathy, and compassion\n\t, • Effective communication skills, including active listening, writing, speaking and reading comprehension\n\t, • Fast and adaptive problem-solving abilities\n\t, • Ability to stand for long periods of time\n\n\n \n\n If you meet the required qualifications and are interested in this role, please apply today. \n\n Why Work with Us \n\n The success of Solomon Page is defined by our people. Healthcare providers are offered a comprehensive benefits program including a robust medical benefits package. Additionally, you are offered access to dental and vision coverage, commuter benefits, a 401(k) plan, flexible spending, referral bonuses, ongoing training, and more. Finally, as an ESOP company, Solomon Page offers an employee stock ownership plan to all consultants. As a member of our provider community, you will join a nurturing culture that fosters your career goals. \n \nAbout Solomon Page Healthcare & Medical Staffing \n\n Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides ourselves in developing long-term relationships with healthcare providers based on trust and respect. Our experienced Healthcare and Medical Staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com and connect with Solomon Page on Instagram, Facebook, Twitter, LinkedIn, and TikTok. \n\n 449272 Solomon Page Job ID #450323. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: ct technologist - radiology | fullerton, california About Solomon Page Founded in 1990, Solomon Page has grown to be a leader in the staffing industry. As a member of our healthcare provider community, you will join a nurturing culture that fosters your career goals. We have the network and resources to connect you with your next opportunity – whether it is in your hometown, or you are looking to travel to a new destination. Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides itself in developing long-term relationships with healthcare providers based on trust and respect. Headquartered in New York with offices throughout the United States our experienced healthcare and medical staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com/healthcare and connect with us on Facebook, Twitter, Instagram, Tik Tok, and LinkedIn. • ReviveHealth Virtual Care: Available immediately. Receive free, 100% company paid, virtual care access. Upon commencement of your employment, Solomon Page offers automatic enrollment into ReviveHealth, which offers concierge, membership-based access to virtual primary care, urgent care, mental health therapy, a vision program, and prescription medications., • Medical Coverage: Available immediately. Whether you are looking to enroll in single or family insurance, you have immediate access to quality coverage., • Dental Coverage: Available the 1st of the month after your hire date. We offer dental insurance to you and your dependents., • Vision Coverage: Available the 1st of the month after your hire date. We offer vision insurance to you and your dependents., • Commuter Benefits: Available the 1st of the month after your hire date. Set aside pre-tax money to pay for public transportation., • 401K Plan: Associates can enroll in the 401K plan after they have worked 1000 hours., • ESOP Benefits: As an ESOP company, Solomon Page offers an employee stock ownership plan., • Referral Bonus: A cash bonus is offered for referring a candidate to Solomon Page who gets placed., • Training & Support: Training programs and ongoing career coaching and support is offered to consultants.Benefits, • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan, • Referral bonus

Lancesoft is seeking an experienced Labor and Delivery Registered Nurse for an exciting Travel Nursing job in Los Angeles, CA. Shift: 3x12 hr nights Start Date: ASAP Duration: 13 weeks Pay: $2850 / Week Accepts 1st time travelers!ASAP START! Unit Details: 4 Triage, 11 LDR, 2 OR, NICU & Post-Partum. 24 OB hospitalist & OB anesthesia. Low and High Risk L&D Patient Population: -Neonates-Adolescents-Adults Requirements: Minimum 3 years' experience required Required Certifications: - AHA BLS- ACLS- NRP- AWHONN Advanced Required Skills:-Use of External Fetal Monitoring -Recognition and Treatment of abnormal fetal heart rate patterns -Circulate for C-section Unit Systems: -SBAR-Omnicell -eMD Allscripts Benefits: 🎯 Why LanceSoft? We’re proud to be recognized by Staffing Industry Analysts (SIA) as one of the fastest-growing staffing firms in the U.S. Our mission is simple: to empower healthcare professionals like you with opportunities that support both personal fulfillment and professional growth. As a certified Minority Business Enterprise (MBE) and an Equal Opportunity Employer, we’re committed to diversity, inclusion, and real human connection. 🎯 Benefits Four options of medical Insurance Dental and Vision Insurance Other Employee Perks License & certification reimbursements About Lancesoft: LanceSoft’s mission is to establish global cross-culture human connections that further the careers of our employees and strengthens the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.We are appreciative and thankful to the clients and employees we work with every day that have made us a respected global workforce provider. We want the experience to be worthy of your investment, whether that investment is in capital, time, reputation, education, or skills you've acquired. We want to do right by you, create stories that you'll share with your friends, colleagues and peers.

Lancesoft is seeking an experienced Labor and Delivery Registered Nurse for an exciting Travel Nursing job in Los Angeles, CA. Shift: 3x12 hr nights Start Date: ASAP Duration: 13 weeks Pay: $2850 / Week Accepts 1st time travelers!ASAP START! Unit Details: 4 Triage, 11 LDR, 2 OR, NICU & Post-Partum. 24 OB hospitalist & OB anesthesia. Low and High Risk L&D Patient Population: -Neonates-Adolescents-Adults Requirements: Minimum 3 years' experience required Required Certifications: - AHA BLS- ACLS- NRP- AWHONN Advanced Required Skills:-Use of External Fetal Monitoring -Recognition and Treatment of abnormal fetal heart rate patterns -Circulate for C-section Unit Systems: -SBAR-Omnicell -eMD Allscripts Benefits: 🎯 Why LanceSoft? We’re proud to be recognized by Staffing Industry Analysts (SIA) as one of the fastest-growing staffing firms in the U.S. Our mission is simple: to empower healthcare professionals like you with opportunities that support both personal fulfillment and professional growth. As a certified Minority Business Enterprise (MBE) and an Equal Opportunity Employer, we’re committed to diversity, inclusion, and real human connection. 🎯 Benefits Four options of medical Insurance Dental and Vision Insurance Other Employee Perks License & certification reimbursements About Lancesoft: LanceSoft’s mission is to establish global cross-culture human connections that further the careers of our employees and strengthens the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.We are appreciative and thankful to the clients and employees we work with every day that have made us a respected global workforce provider. We want the experience to be worthy of your investment, whether that investment is in capital, time, reputation, education, or skills you've acquired. We want to do right by you, create stories that you'll share with your friends, colleagues and peers.

Job DescriptionDescription: Signia Aerospace is a global, integrated provider of high-performance systems and specialized components for the aerospace industry. Signia currently operates two complementary business segments: Thermal Management (key brands include ACE Thermal Systems and Mezzo Technologies) and Mission Systems (key brands include Onboard Systems, Lifesaving Systems, and Meeker Aviation). The Signia brands are leaders in their respective markets and provide a compelling value proposition to both aerospace and defense OEMs and end-users. Onboard Systems Hoist & Winch, located in Anaheim, CA is one of the world’s leading providers of Search & Rescue (SAR) and Human External Cargo (HEC) advanced mission equipment for civil, commercial, and military helicopters. Position Overview This is a union position covered under a collective bargaining agreement. Starting pay is $25.00 per hour per the union contract. The ability to pass a pre-employment background check and an FAA-regulated drug test is required. Location: Anaheim, CA (Onsite) Shift: Monday-Friday 6:00am - 2:30pm Pay: $25.00 per hour The Electrical Assembly Technician will be responsible for assembling products to blueprint specifications while adhering to strict quality standards. The ideal candidate will have a strong attention to detail, the ability to work independently and within a team, and a commitment to maintaining a safe and clean work environment. What You’ll Do • Assemble electrical aerospace products in accordance with blueprint specifications and defined quality standards., • Use hand tools and equipment to perform various assembly tasks, ensuring accuracy and precision., • Obtain necessary training to acquire relevant skills, knowledge, and certifications for the job., • Inspect parts and assembled products to detect and resolve any quality defects or discrepancies., • Follow all relevant quality systems and Environmental Health and Safety (EHS) protocols to ensure a safe and compliant workplace., • Maintain an organized, clean, and efficient work area, ensuring proper care and handling of materials and tools., • Collaborate with team members to complete projects efficiently and effectively., • Perform other duties as assigned to meet production goals and deadlines. Who You Are • This position requires the ability to communicate in English, both verbally and in writing, to complete inspection reports and understand safety and quality standards., • High School Diploma or GED, with a minimum of 1 year of Aerospace or Automotive industry experience. Graduation from an Aerospace or Automotive technical program can substitute for experience., • Ability to interpret and work from technical drawings and assembly instructions., • Strong attention to detail, analytical skills, and problem-solving capabilities., • Ability to work effectively within a team, taking direction from experienced peers, leads, and supervisors., • Ability to stand, bend, stoop, and lift materials regularly., • Ability to sit and stand for extended periods during the assembly process., • Minimum 20/30 vision with the ability to see small parts and components. What’s In It for You • This position is part of union, offering negotiated benefits and protections. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status Requirements:

Job DescriptionSUMMARY: Karman Space & Defense is looking for Assembly Technicians at all levels of experience for a hands-on work environment performing a variety of tasks to support the engineering, manufacturing and production teams. Daily responsibilities may include production assembly, mechanical assembly, thermal protection systems, receiving support, packaging and shipping. Previous experience working with power tools & forklifts are encouraged. The Assembly Technician reports to the Assembly Manager & Operations Manager. About us: Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPANY BENEFITS: • Medical, • Dental, • Vision, • Life, • 401k, • Tuition Reimbursement, • Paid Holidays, • Employee Referral Program KNOWLEDGE AND SKILL REQUIREMENTS: • Performs assembly task according to verbal and written instructions, • Uses solvents & bonding material as required, • Ability to use hand tools, • Basic computer skills, • Basic ability to use measuring tools, • Maintain a clean work area daily **Night Shift Candidates: MUST BE ABLE TO TRAIN ON THE 1st SHIFT AND TRANSITION TO 2nd SHIFT ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. 1st Shift | 6:00 AM to 4:30 PM | Monday-Friday, Saturday (6 hours) 2nd Shift 4:00 PM to 12:45 AM - Monday-Friday, Saturday (6 hours)

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Vision insurance 1st shift: 6:00 AM to 2:30 PM Qualifications • High School Diploma, GED or equivalent, • Relevant mechanical assembly experience, • Laser Engraving, • Quality control and parts inspection, • Visual and Mechanical inspection and troubleshooting skills., • Must be able to follow Standard Operating Procedures and process requirements., • Basic computer skills including familiarity with Microsoft Office (Excel, Word, Access), • Ability to lift and carry items weighing up to 50 lbs., • Ability to stand and walk around consistently thru a full work shift doing repetitive assembly tasks. Responsibilities • Prepare child parts for the next days assembly requirements, • Laser Engraving, • Quality Control and Parts Inspection, • Perform visual inspection of various automotive components for coating integrity, color requirements and damage per SOP instructions., • Perform mechanical assembly of various automotive components using automatic and manual presses, grease guns and other assembly tools and equipment., • Perform final inspection of assembled components using various inspection equipment, gages, etc., • Understand production schedule and daily assembly requirements of various product lines of parts.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Vision insurance 1st shift: 6:00 AM to 2:30 PM Qualifications • High School Diploma, GED or equivalent, • Relevant mechanical assembly experience, • Laser Engraving, • Quality control and parts inspection, • Visual and Mechanical inspection and troubleshooting skills., • Must be able to follow Standard Operating Procedures and process requirements., • Basic computer skills including familiarity with Microsoft Office (Excel, Word, Access), • Ability to lift and carry items weighing up to 50 lbs., • Ability to stand and walk around consistently thru a full work shift doing repetitive assembly tasks. Responsibilities • Prepare child parts for the next days assembly requirements, • Laser Engraving, • Quality Control and Parts Inspection, • Perform visual inspection of various automotive components for coating integrity, color requirements and damage per SOP instructions., • Perform mechanical assembly of various automotive components using automatic and manual presses, grease guns and other assembly tools and equipment., • Perform final inspection of assembled components using various inspection equipment, gages, etc., • Understand production schedule and daily assembly requirements of various product lines of parts.

Job DescriptionSHIFT Training in 1st shift M-F: 6am - 4:45pm & Sat. 5:00am - 11:00 m Second Shift: M - F 3pm - 2 am & Saturday is 9:00 am - 3pm. SUMMARY Without the strength of our Assembling Team, we would not be able to offer the industry-leading service we’re known for. We’re seeking an experienced Assembly Operator Professional. The ideal candidate will have proven industry experience as an Assembly Operator. As a strong communicator and skilled hands-on Assembly, you will have good technical knowledge and possess great manual dexterity. Ability to read instructions represented in manuals, drawings, schematics etc. and follow them with precision is extremely important. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* WHAT YOU WILL DO • Ability to use hand tools, • Able to use appropriate measuring devices, such as calipers, micrometers, height gages, plug gages, etc. WHAT WE ARE LOOKING FOR • Maintain a clean work area daily as required, • Must work closely with the CNC Programmer EDUCATION & EXPERIENCE • High school graduate or equivalent in work experience., • Experience in Assembly. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. TRAVEL REQUIREMENTS: No travel required for this position. PHYSICAL REQUIREMENTS: As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description Now Hiring! APPLY TODAY AND Start ASAP Position: General Labor Work Compensation: $16.90 for 1st shift, $17.40 2nd Shift Duties: • Works with Assistant Shop Supervisor and/or Foreman for efficient packing/ racking techniques., • Stacking, • General Labor, • Verify with the Supervisor any special requirements., • Report all problems with parts or equipment to the Supervisor or Foreman., • Minimum in 1yr manufacturing/ or Warehouse experience

La Habra, CA $600-$800+/weekly 1st & 2nd Shift People want to work at Capstone because of our high-performance culture. We build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities. Through transparency and open lines of communication, we do the right thing and deliver on our promises. Think you have what it takes? The Opportunity: Warehouse Associates perform a variety of warehouse responsibilities including but not limited to loading, unloading, selecting, freight hauling, auditing, repacking, sorting, palletizing, clean up, housekeeping and other duties as assigned by site leadership. Requirements: High-energy individual with a strong work ethic, the work is fast paced and very physical Lift and carry 25-75lbs, materials handled vary Prior warehouse and/or equipment experience is preferred but we are willing to train the right candidate Why you should work with us: Get paid weekly Benefits-after 60 days of employment Career growth-our company looks to promote from within first Join our travel team, see the country, learn how all our sites operate Paid Training, Safety Incentives Our team fully embraces a high-performance culture, that inspires us to build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities. About the Company: Capstone is a North American supply chain solutions partner with more than 650 operating locations, 19,000 associates, and 60,000 carriers. We have capabilities in freight management, warehouse and distribution center support, last-mile delivery, supply chain analytics, and optimization, and more. Our integrated, end-to-end logistics solutions uniquely position us to help partners reduce warehousing and transportation costs. #CB

Job Description 1st and 2nd shift available POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Helper/Laborer is responsible for putting parts on and off the racks so that they may be prepped and ready for plating process, prepare and package parts, as well as perform general duties within the department. ESSENTIAL DUTIES & RESPONSIBILITIES: • Places parts on and off racks as needed., • Performs bending of aluminum wires on racks to ensure parts are secure and adequately placed., • Tightens bolts and screws with equipment and tools on saddle racks to ensure they are secure., • May assist the Plater in cleaning tanks., • Performs visual inspection of parts to ensure no over plating., • Use air hose to dry parts upon completion of plating cycle., • Prepares and packages parts for shipping., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Comfortable using basic tools (i.e. wire cutters and air hose)., • Comfortable working on a platform with tanks of acid and chemicals., • Ability to pay attention to detail and follow precise instructions.

Job Title: Inspector - Receiving & In-Process Inspection Pay rate: $24.00-$26.00 Hours: 1st shift The Inspector is responsible for performing quality inspections on incoming materials and components, as well as monitoring and verifying product quality during the manufacturing process. This role ensures compliance with company standards, customer requirements, and regulatory guidelines to maintain the highest level of product integrity. Receiving Inspection: Inspect incoming raw materials, components, and assemblies against purchase order specifications, drawings, and quality standards. Verify supplier documentation, including Certificates of Conformance and material certifications. Perform optical filter checks using spectrophotometer devices to validate transmission and wavelength specifications. Record inspection results and maintain accurate documentation in the quality system. Identify and segregate non-conforming materials; initiate and document DMRs (Defective Material Reports). In-Process Inspection: Perform inspections at designated stages of the manufacturing process to ensure compliance with specifications and work instructions. Verify critical dimensions, functional characteristics, and visual quality using appropriate tools and gauges. Support production teams by providing feedback on quality issues and assisting with corrective actions. Document inspection results and maintain traceability of inspected parts. Perform Operational QC for optical sensors and machine shop parts, including checking documentation according to EN 10204 and ASTM standards. Familiarity with handling explosion-proof materials High school diploma or equivalent; technical training or certification in quality inspection preferred. Minimum 5 years of experience in quality inspection within a manufacturing environment. Strong understanding of mechanical drawings, tolerances, and inspection techniques. Proficiency with measurement tools (calipers, micrometers, thread gauges, pin/plug gauges, bore gauges, Profilometer/surface finish devices, inspection set-ups using granite plate and fixtures) and basic knowledge of GD&T. Familiarity with ISO 9001 quality systems and documentation practices. Ability to work independently, with strong attention to detail and problem-solving skills. Basic computer skills – Microsoft Office Suite (Word, Excel, PowerPoint) and Microsoft Teams application. KPG123

Title: Assembler/Solderer B Location: Buena Park, CA (90620) Job ID#: 72467 Duration: 3-6 months (possibly longer) Rate Range: $21.00 - 23.00/hr W2 Shift: 1st shift Job Summary Under general supervision, performs assembly and solder operations according to manufacturing specifications and process instructions. Maintains accurate work in progress paperwork. Primary Responsibilities Using solder irons, solders assemblies in accordance with process instructions Visually inspects assemblies to ensure compliance to specifications Fills out and maintains necessary paperwork Ensures paperwork is compliant with quality instructions and manufacturing job instructions Actively participates in the Quality Improvement System Using assembly drawings assembles electronic PC boards from various components to meet specifications. Job Requirements: J-STD-001 solder certified. Passing a visual acuity exam is required. Ability to identify electronic components (through hole and SMT) Basic understanding of mechanical assembly and PCB assembly processes Familiarity with manual and automated soldering tools and microscopes Ability to follow IPC or J STD 001 standards Ability to read and understand work instructions, drawings, and technical documents Attention to detail and precision in repetitive tasks Problem solving ability and good communication skills Ability to work well in a team environment Reliable attendance and ability to work with minimal supervision Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices . Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Join a leading high-reliability electronics manufacturer offering long-term contract to hire opportunities across multiple shifts. Open Shifts & Hours: 1st Shift (6:00am–2:30pm) 2nd Shift (2:30pm–11:00pm) 3rd Shift (10:00pm–6:30am) Drill Operator 1st and 3rd shift Run multiple CNC drilling machines to produce precision holes in PCB panels—setup, load programs, align panels, inspect work, and keep equipment running smoothly. Requires 1+ year PCB experience, machine troubleshooting ability, and comfort with extended standing/sitting and light lifting. Lab Technician 1st shift Prepare and evaluate microsections for in-process and final quality checks, including sample prep, thermal stress testing, cross-section evaluation, reporting, and traceability. Requires 3+ years PCB experience, microsection/chemical analysis skills, and strong focus and organization. Starting pay rate: $19.00 per hour to start KPG123

We are seeking a Machine Operator with a high- end hardwood flooring manufacturer that offers room for growth. In this position, the Machine Operator will be crossed trained in every department from using band saws, sanding, press operating, and operating all equipment, including general labor, and loading/unloading material. Other duties will include working with all departments and having the sense of urgency to ensure all production is running on time. Why work here? This is a long term and stable position. They are seeking responsible individuals that are looking for great place to work where performance and hard work is recognized and rewarded. Once hired, you will you be eligible for an excellent PTO plan, profit share program for your retirement fund, and 100% medical coverage to the employee. Qualifications 2+ years of previous Production or Machine Operating experience Ability to lift up to 50lbs & work in a fast-paced production environment Math Skills /Problem Solving Attention to Detail Mechanically inclined, hand tools, power tools Ability to work with drawings or blueprints History of excellent attendance Pay rate is -$24.00 per hour Job Schedule: Full time. 40 hrs./week. Monday - Friday. Hours: 1st shift, 5:00am -1:30pm/3:30 pm for OT- Once fully trained after 4-5 month, hours could change to 8 am to 5:30 pm. Please send us your resume for immediate consideration! KPG123

Responsibilities About Howmet Aerospace Howmet Fastening Systems (HFS) is seeking a Tool Maker IV, Machine Build- 1st Shift for our Fullerton, CA location. At this facility Machine building is responsible for the Design and manufacture of specialized, custom automation solutions in support of Aerospace fastener manufacturing. Utilizing the latest technology in PLC, machine vision, robotics, and smart manufacturing, we support HFS sites worldwide with their challenging production needs. In this role you will be responsible for supporting various aspects related to the production and support of custom machinery solutions. Including but not limited to custom new builds, re-builds, and retrofits. Primarily this is a Tool maker/machinist role. But this position offers great exposure to anyone looking to pursue growth in the field of industrial automation or robotics. Essential Duties and Responsibilities \n • Produce various machine parts and tooling to prints, or from sketches utilizing CNC mills Lathes and surface grinders. \n, • Make drawings and sketches as needed to produce or reproduce critical tools or components. \n, • Work accurately to meet precise tolerances of (+ .001). \n, • Assembly of new mechanical systems with instruction. Disassembly of existing mechanical systems for inspection and recommend repairs or replacements with or without instruction.\n, • Machine, assemble, install machine guarding utilizing aluminum extrusions (80/20) and polycarbonate sheets to specification. \n, • Work with design team and engineers to develop parts and processes for efficient economical manufacturing. Help produce proof of concept models and test fixtures.\n, • On occasion Generate material and supply requests to support assigned work.\n, • Provide guidance and support for installed systems at sister sites occasionally requiring some local travel. \n, • Perform Basic preventive maintenance on equipment operated. \n, • Demonstrate Working knowledge of manufacturing quality processes and principles\n, • Solve practical problems with a variety of variables in a fast-paced environment.\n, • Keep work area and equipment clean, organized, and safe. Perform and maintain 5s standards to the highest level.\n, • Perform other tasks of equal or lesser skill as required.\n, • Share and accept knowledge and feedback with peers in support of growth and development of inclusive team environment. \n, • Engage regularly in conversations for improvements in efficiency and productivity. Make recommendations for tools or equipment to streamline performance of assigned tasks. \n\n Qualifications Basic Qualifications: \n • 2+ years Machine building or tool-room experience preferred. \n, • Able to calculate mathematical figures and amounts.\n, • Must have thorough knowledge of precision measuring equipment, shop math, and trig.\n, • Not required but beneficial: Experience with Trak machine tools, SMX, RMX, SLX, RMX CNC controls. Pneumatics, hydraulics, robotics, Solidworks, CAD.\n, • Willing to train if candidate possesses strong adjacent skills or mechanical knowledge. \n, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.\n\n Physical Demands: \n • Use hands to finger, handle, or feel and reach with hands and arms. \n, • Frequently required to stand and sit. \n, • Occasionally required to walk and talk or hear. \n, • Frequently lifts and/or moves up to 30 pounds. \n, • Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus.\n\n Preferred Qualifications: \n • High School Diploma, GED, apprenticeship, or equivalent preferred. \n, • Experience with aerospace tooling and fasteners.\n, • Strong communication skills - written and oral.\n\n Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $23.86 to $40.57. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

Do you love bringing characters to life through working with hair? Then apply to our Cosmetologist position today! Our Cosmetology Cast Members provide and maintain wigs styled to an approved corporate design for performers and Audio-Animatronic figures, and teach entertainers proper makeup application across the Disneyland ® Resort. Responsibilities : Wash, set, and style assigned show wigs Recreate specific styles from photos in a clear and defined manner, which may involve period looks Knowledgeable of the appropriate styling tools to use when working with synthetic and human hair wigs Assist with pinning on wigs and retouches for parades, shows, and various Entertainment venues Basic Qualifications : You must be at least 18 years of age or older to be considered for this role Must have a valid Cosmetology license with the state of California Lead with a positive demeanor and approach challenges head-on Enthusiastic about interacting and working with internal Guests/Cast Members Complete repetitious tasks while maintaining quality Self-directed and able to collaborate on a team Flexible and adaptable, especially working in a variety of areas, conditions, and changing shift times Committed and reliable for scheduled shifts Training Availability: Must be fully available for six (6) weeks of training For Part Time, must be fully available Friday, Saturday, Sunday, and all holidays year-round Preferred Qualifications: Two (2) years of salon work experience as a licensed Cosmetologist Advanced industry classes/education Experience styling synthetic and/or human hair wigs Styling experience with theatrical period looks Full availability for any shift, seven (7) days per week, including nights, weekends, and holidays is preferred Additional Information : SCHEDULE AVAILABILITY Our Theme Parks and Resort Hotels operate 24 hours a day, 365 days a year. Must have flexible availability to work Sunday through Saturday, all shifts (i.e. 1st, 2nd, and 3rd shift) including holidays. SUBMITTING YOUR APPLICATION After clicking " Apply Now " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR CASTING, dlrcasting, Disneyland Resort Casting Hourly Jobs, DLRResortRoles, DLR Resort Roles, cosmo, cosmetology, cosmetologist The pay rate for this role in California is $25.50 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: https://jobs.disneycareers.com/benefits (https://jobs.disneycareers.com/benefits) .

Picture yourself spending your days in Disneyland, knowing you help keep attractions like Space Mountain and The Matterhorn up and running. Wouldn't it be cool to put your skills to work on the rides, restaurants and facilities of the " Happiest Place on Earth ?" If you're interested in knowing that your work helps people smile, keep reading… We're looking for highly skilled Electricians who have experience maintaining and repairing equipment like that found at Disneyland and Disney California Adventure, kitchen & restaurants . If this sounds like a challenge you're ready to undertake, apply today to join the team! Responsibilities : Every day as an Appliance Electrician is different . On any given day or night, you might: Troubleshoot equipment problems at one of the many restaurants to keep the food flowing. Be responsible for performing preventive maintenance, repairing electrical systems/assemblies, lamping, installation of receptacles, switches, bending conduit, and resetting breakers. Basic Qualifications : To be successful in this role, you will need: Ability to perform maintenance on food preparation and holding appliances/equipment. Understanding of and ability to operate under Hazard Analysis Critical Control Point (HACCP) guidelines and other food safety/sanitary guidelines. Must also be able to troubleshoot and repair gas and steam systems applied in commercial kitchen equipment. Technical competence, the ability to read and understand detailed instructions, blueprints, flowcharts, schematics and engineering documents, and pass all compliance for technical and safety training Knowledge in the control and repair of circuits and motors Keen troubleshooting skills and comfortable working alone or in a team. Ability to evaluate the scope of a job, resolve needed parts/materials, and order through authorized vendors Expertise using common hand tools, meters, gauges and other associated test and measurement equipment, as well as ability to measure current, voltage and amperage Proficiency in the basic math skills needed to do the job, differentiate colors, digital literacy, and full understanding of the National Electric Code Stamina and the physical ability to undertake the job. You might bicycle, bend, kneel, climb, push vehicles to re-position them for repair, work with arms/hands above shoulder level for an extended period of time, climb (sometimes as high as 200 ft.) and more, all on a regular basis At least 18 years of age You will be required to use 2-way radios, learn CMMS (MAXIMO work order system), attend/pass compliance and other training sessions to ensure accurate maintenance documentation Electricians may work outdoors in all weather conditions, in an industrial workshop, in kitchens with wet/slippery surfaces, and may have occasional exposure to high temperatures, noise levels, and fumes In addition to the physical tasks listed above, Electronic Technicians may need to push/pull and/or lift up to 10 lbs. constantly, up to 25 lbs. frequently, up to 75 lbs. occasionally and rarely up to/over 100 lbs. Schedule Availability - Must be open to any shift (1st, 2nd, and 3rd shift) including weekends, holidays, with any combination of days off. Preferred Qualifications: 2 or more years of experience * Ideal backgrounds include trade school, apprenticeship and related experience Additional Information : Those assigned to the Electrician position are required to attend an annual Hearing Conservation training class and Lead Awareness class. They are also required to submit to an annual audiometric exam and a semi-annual Lead/Zinc blood test. SCHEDULE AVAILABILITY Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. SUBMITTING YOUR APPLICATION After clicking " Apply Now " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere, electrician, electronic technicians, blueprints, flowcharts, schematics, engineering documents, circuits, current, voltage, amperage, Hazard Analysis Critical Control Point, HACCP, National Electric Code, CMMS, MAXIMO The pay rate for this role in California is $41.63 to $50.68 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: https://jobs.disneycareers.com/benefits (https://jobs.disneycareers.com/benefits) .

At Disney, we're storytellers. We make the impossible, possible. We do this through applying and developing groundbreaking technology and innovating to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our dedicated team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. As a Maintenance Engineer, you'll be responsible for maintaining and repairing the essential systems that keep our hotels running smoothly. From HVAC, plumbing to electrical, to commercial appliances and carpentry, your work will directly impact the comfort and experience of our Guests and Cast Members. Responsibilities : Operating Engineer (CEP) Maintain boilers, chillers, compressors, refrigeration equipment, generators, plumbing, and electrical systems Troubleshoot mechanical systems Painting/Wallpaper Prepare surfaces prior to application of paints, coatings, and wallpaper to the building's interiors and exteriors Paint and refinish furniture, props, and other items as directed by the Disneyland ® Resort leadership team Cut and repair drywall as needed and provide patch work and texturing to match adjacent surfaces Prepare and refinish surfaces to Resort standards while matching interior and exterior paint colors and special finishes Clean, repair, and prime walls to ensure a smooth and adhesive-ready surface for wallpaper application Calculate dimensions, match patterns, and cut wallpaper to fit walls precisely, including around windows, doors, and corners Use adhesives or paste to hang wallpaper, ensuring proper alignment, smoothness, and a professional finish without bubbles or wrinkles HVAC Maintain and troubleshoot A/C and refrigeration systems Troubleshoot electrical and mechanical systems Maintenance and repair on commercial kitchen equipment on both hot and cold side Electrical Troubleshoot electrical systems Inspect and maintain electrical panels, breakers, and wiring systems Replace faulty switches, outlets, ballasts, and light fixtures Troubleshoot and repair electrical malfunctions in guest rooms and common areas Ensure emergency lighting and exit signs are operational and compliant Plumbing Inspect and maintain water supply lines, drainage systems, and fixtures Repair or replace leaking faucets, toilets, showerheads, and other plumbing fixtures Unclog drains and toilets using appropriate tools and techniques Mechanical Equipment Operate, fix, and maintain industrial-laundry equipment to include washers, dryer, ironers, spreaders, folders, and steam press Lubricate and replace belts, bearings, and motors in mechanical equipment Carpentry Prepare wood surfaces for staining by sanding, cleaning, and conditioning Apply stains, sealants, and finishes to wood surfaces to achieve desired aesthetics and durability Match stain colors and finishes to existing décor and ensure consistency across hotel furnishings Repair and install wood fixtures such as doors, frames cabinetry, molding, and furniture Install, repair, and maintain various types of flooring including hardwood, laminate, tile, and carpet Basic Qualifications : You must be at least 18 years of age to be considered for this role Minimum 5 years of experience in hotel or resort maintenance Ability to read blueprints, schematics, and technical diagrams Proficient in using hand and power tools Familiarity with energy management systems and CMMS software Previous experience performing preventative maintenance on equipment (i.e. boilers, chillers, HVAC-Heating Ventilation and Air Conditioning, electrical, etc.) Certifications: EPA 608 Universal Certification required Preferred Qualifications: Wood Stain Specialist Flooring Specialist Wallpaper Hanger Commercial Kitchen Appliance Technician Additional Information : SCHEDULE AVAILABILITY Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. SUBMITTING YOUR APPLICATION After clicking " Apply Now " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere The pay rate for this role in California is $36.78 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: https://jobs.disneycareers.com/benefits (https://jobs.disneycareers.com/benefits) .

(Local, Southern California applicants sought - NO RELOCATION OFFERED.) This position requires at least one year of professional automotive-maintenance experience. Working on one's own car, or those of friends and family, does not qualify. The Oiler-Truck Driver position performs functions that include operating a fuel truck to provide fueling services, lubrication support, oil analysis, and tire repairs for vehicles and equipment. This position provides direct support to all Disneyland Resort departments that operate vehicles, motorized equipment, and for Attractions that require routine-lubrication work. Responsibilities : Fueling service of automotive equipment - Operate fuel trucks and dispense gasoline, diesel, and CNG (compressed natural gas). Record fuel meter readings and contain/clean up any fuel spills as they occur. Lubrication Support - Perform lubrication services using oils, greases, and filters when servicing automotive vehicles, gear boxes, atomizers, bearings, chains, and other types of equipment. Record meter readings for assets on a utilization maintenance schedule. Take oil samples when required for oil analysis. Understand the fundamentals of lubrication. Tire Work - Operate tire changing machines, balancers, lifts, jacks, impacts, and torque wrenches to repair tires. Knowledge needed to recognize tire wear and to find leaks. Basic Qualifications : Schedule Availability Must be open to any shift (1st, 2nd, and 3rd shift) including holidays, with any combination of days off Experience and Abilities Must have professional, paid experience performing the duties listed under "Responsibilities" above This position requires at least one year of professional automotive-maintenance experience. Working on one's own car, or those of friends and family, does not qualify. Tires Professional experience repairing, patching and/or plugging tires Experience safely handling split rims General knowledge of tread types, ply ratings, and tire pressures is also important Lubrication Familiarity with lubrication fundamentals, and oil sampling and analysis Experience performing oil changes General Experience operating fuel trucks, tire machines, automotive equipment and hand tools Familiarity handling hazardous waste Ability to learn the Computerized Maintenance Management System (MAXIMO) Additional Information : Those assigned to the Oiler-Truck Driver position are required to attend an annual Hearing Conservation Training class and an audiometric exam SUBMITTING YOUR APPLICATION After clicking " Apply Now " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere The pay rate for this role in California is $33.75 to $43.08 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: https://jobs.disneycareers.com/benefits (https://jobs.disneycareers.com/benefits) .

There are many roles in which our Cast Members bring Disney dreams to life. Do you want to be part of the magic behind the magic? The Plasterer 200 is responsible to perform functions that include but are not limited to plastering normal finishes and simulated finishes (i.e., rock work, brick, stone wood). The removal and installation of tile brick pavers, concrete and asphalt. This will include shop work, field and rehab work ranging from construction to the intricacies of the refurbishment of. It requires the ability to read blueprints, follow engineering instructions and use normal hand tools and power tools. This position provides support to Engineering, all maintenance teams including attractions, ride and show, and infrastructure facilities. Responsibilities : Safely use and maintain basic hand tools and to operate pneumatic and electric-powered tools utilizing the proper safety precautions, including personal protective equipment (PPE) Read blueprints and follow engineering instructions Use MAXIMO (a work order tracking system), and follow check lists to safely handle materials, lock-out and tag-out of attractions, operate department equipment and vehicles, and know what actions to take in case of a failure Remove and repair cement, pavers, asphalt, and tile while possessing a basic knowledge of how to handle and use molds and models (preferable knowledge of how to fabricate molds and models), and possessing the ability to plaster and apply or carve in the plaster simulated finishes (i.e., rock work, wood, stone, brick, etc.) Operate a man-lift, forklift, scissors lift, truck, bicycle, and both gas and electric powered carts Basic Qualifications : You must be at least 18 years of age to be considered for this role Able to work with cementitious materials, resins, epoxies, adhesives, acrylics, urethanes, molds, models, and basic tools required of plasterer and a typical maintenance type position Familiarity with safety procedures and equipment necessary to accomplish tasks listed previously Able to read and interpret blueprints Able to read, interpret, and follow checklists, written procedures, and/or processes Familiar with or have the ability to learn the Computerized Maintenance Management System Excellent communicator (express technical ideas, exchange information with WDI personnel, management, and other Cast Members) * Able to work in a fast-paced and dynamic environment Additional Information : SCHEDULE AVAILABILITY Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. SUBMITTING YOUR APPLICATION After clicking " Apply Now " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere, pneumatic tools, manlift, forklift, scissors lift, truck, bicycle, blue prints,engineering, MAXIMO, cement, pavers, asphalt, tile The pay rate for this role in California is $40.50 to $50.55 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: https://jobs.disneycareers.com/benefits (https://jobs.disneycareers.com/benefits) .

Would you like to help deliver unparalleled creative content to audiences around the world? The Carpenter team builds, manufactures, and details permanent and temporary displays for the entire Disneyland Resort, including the Parks and Hotel. If you are interested in helping to transform scenes that bring magic to our Disneyland Resort, apply to be a Carpenter today! At the Disneyland ® Resort, we are makers and doers. Experience the Disney Difference through outstanding and unique perks and benefits like cast-exclusive discounts, and access to tuition assistance through Disney Aspire! (Local, Southern California applicants sought - NO RELOCATION OFFERED.) Responsibilities : At Disneyland ® Resort, as a Carpenter, you will: Construct, erect installs, and repair structures and fixtures of wood, plywood, and wallboard Use carpenter's hand tools and power tools Conform to local building codes and regulations Build props and sets, framing, hanging windows and doors, decorations, locks, floor work, cutting material, shaping material, stripping and treating material, preparation of work surfaces, and other tasks expected of the trade Basic Qualifications : You must be at least 18 years of age to be considered for this role Ability to read blueprints and drawings to extract information such as material requirements and structure dimensions Strong ability to perform layout preparation using measurement tools with the ability to accurately mark materials for cutting and assembly Fastening materials accurately with nails, dowel pins, screws, bolts, or glue Assemble of framework for structures including the laying of subflooring, building stairs, and laying out and installing partitions and cabinet work. Fitting and installation of window frames, doors, door framing, weather stripping, trim and finish hardware (locks, kick plates, etc…) Erection of scaffolding and ladders for assembling structures above ground level Proven understanding of the design and fabrication of props and other show-support items within budget and time constraints Proven understanding of 3-D design methods Design of specialty windows and other show props/sets to build themed show items Vital understanding of the safety components of all tools Preferred Qualifications: Journeyman Level Carpenter with demonstrable experience of 5 years or more * Previous Painting experience Additional Information : SCHEDULE AVAILABILITY Capable to work overnights and overtime when needed for installation purposes. Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. SUBMITTING YOUR APPLICATION After clicking " Apply Now " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere The pay rate for this role in California is $35.70 to $45.43 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit: https://jobs.disneycareers.com/benefits (https://jobs.disneycareers.com/benefits) .

Job Description We currently have 1st and 2nd shift available. POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Helper/Laborer is responsible for putting parts on and off the racks so that they may be prepped and ready for plating process, prepare and package parts, as well as perform general duties within the department. ESSENTIAL DUTIES & RESPONSIBILITIES: • Places parts on and off racks as needed., • Performs bending of aluminum wires on racks to ensure parts are secure and adequately placed., • Tightens bolts and screws with equipment and tools on saddle racks to ensure they are secure., • May assist the Plater in cleaning tanks., • Performs visual inspection of parts to ensure no over plating., • Use air hose to dry parts upon completion of plating cycle., • Prepares and packages parts for shipping., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Comfortable using basic tools (i.e. wire cutters and air hose)., • Comfortable working on a platform with tanks of acid and chemicals., • Ability to pay attention to detail and follow precise instructions.

When you visit the Disneyland® Resort, are you the one in your group looking at how things work? Are you an industrial-maintenance mechanic - and do you enjoy working with your hands and repairing large equipment? Are you tired of companies closing their doors or moving out of state? Then we may have your dream job! Responsibilities : The Maintenance and Facilities division at Disneyland ® Resort is looking for individuals who have experience maintaining, troubleshooting, and repairing heavy, industrial machinery. "Outside Machinists" (maintenance mechanics) work on the Disneyland ® Resort attractions and ride vehicles. This position performs functional checks, troubleshooting, overhauling, maintenance, repair, and alteration of systems and equipment, and conducts quality checks of completed work of equipment. Basic Qualifications : You must be at least 18 years of age to be considered for this role 2+ years of experience directly related as a Maintenance Mechanic in an industrial production facility Schedule Availability : Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off Preferred Qualifications: Technical Abilities : Experience with micrometers, calipers, dial indicators and basic tools required of a machinist Experience with hydraulic and pneumatic systems Familiarity with alignment of pumps and shafts Ability to read and interpret blueprints and schematics Familiarity with the use of PCs Ability to use fall protection, boatswain's chair, power scaffold, and positioning equipment Experience using standard shop equipment such as a drill press, hydraulic press, grinders, sanders, band saws Experience with hoists, lifting and jacking devices, powered carts (Mules), man lifts and lift trucks Ability to safely climb ladders, stairs, and structures, and for those specified to Disney California Adventure Park, are you able to work at heights up to 200 feet above the ground Additional Information : SUBMITTING YOUR APPLICATION After clicking " Apply Now " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere, micrometers, calipers, dial indicators, hydraulic, pneumatic, blueprints, schematics, fall protection, boatswain's chair, power scaffold, positioning equipment, drill press, hydraulic press, grinders, sanders, band saws, hoists The pay rate for this role in California is $41.63 to $50.68 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: https://jobs.disneycareers.com/benefits (https://jobs.disneycareers.com/benefits) .

(Local, Southern California applicants sought - NO RELOCATION OFFERED.) At Disneyland ® Resort, a Pruner provides day-to-day tree care for the Resort urban forest, under the direction of an Arboricultural Manager. Duties include maintaining trees and Resort aesthetics in accordance with the appropriate theme of the specific area of the property while ensuring the comfort and safety of our Guests and Cast Members. Responsibilities : Climbing: Must be able to enter a tree (10 to 150feet) via safe climbing practices under WC-CTW, International Society of Arboriculture (ISA) and ANSI Z133.1 guidelines, as well as safely use an aerial lift under DLR guidelines. Ability to gain proficiency and knowledge of different climbing systems is required Pruning: Must be able to prune young and mature trees using ISA and ANSI Z133.1 pruning standards, as well as Disney Show quality standards. Must be capable of safely using hand pruners, pole pruners, hand saws, pole saws and chainsaws to complete the job. Young Tree Care: Planting: Must be able to plant 15-gallon, 24-inch box trees using ISA and ANSI Z133.1 standards. Shoveling, bending, pushing/pulling and lifting (25-100 lbs.) are involved. Transplanting: Must be able to box up to a 24-inch root ball. Shoveling, strapping, bending, pushing/pulling and lifting (25-100 lbs). Staking New Trees : Must be proficient in staking, use of a ladder, stake pounder, and other staking tools. Inventory Maintenance and Inspection: Involves tree tagging, tree inspection, recording of data in field and on the Access Database Inventory Program. Must have the ability to understand Arboriculture in regards to tree health and structure defects, as well as the ability to input data into the Access computer program. Mature Tree Care: Cabling and Bracing: Must be familiar with hardware and ISA/ANSI Z133.1 installation guidelines. Rigging: Must have the ability to safely perform rigging operations under the standards found in ISA/ANSI Z133.1. Must have the ability to gain proficiency and knowledge of different rigging systems. Removals: Must be proficient in safely removing trees (10-150 feet) using tools specified for pruning. Groundwork: Involves safely securing the work area, providing ground assistance to the climber(s) in the tree (knot knowledge), removing and loading, safely reducing the size of debris with a chainsaw, and safe chipper operation under ISA/ANSI Z133.1 standards. Emergencies: Must be able to handle and react to stressful emergency situations within the tree crew, as well as other possible Cast Member or Guest needs. Must be available on an on-call basis 24 hours a day 7 days a week. Basic Qualifications : Schedule Availability Must be open to any shift (1st, 2nd, and 3rd shift) including holidays, with any combination of days off Qualifications Must have experience performing the duties and actions listed under Responsibilities, above. Must have a valid California Driver's License Must possess a Western Chapter Certified Tree Worker (WC-CTW) certification or the level of ability to obtain a Certified Tree Worker qualification At least 18 years of age Preferred Qualifications: Western Chapter Certified Tree Worker (WC-CTW) certification CPR and First Aid Certification Additional Information : SCHEDULE AVAILABILITY Our Theme Parks and Resort Hotels operate 24 hours a day, 365 days a year; Shifts may start as early as 2:00 AM, while some may end as late as 10:30 AM. This roles is Full Time and requires full availability, including working evenings, weekends and holidays when needed. SUBMITTING YOUR APPLICATION After clicking " Apply for this job " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere, WC-CTW, CTW, WCCTW, InternationalSocietyofArboriculture, International Society of Arboriculture, ISA, ANSI, tree tagging, tree inspection, pruning, tree climbing, treeclimbing, arborist, arboriculture, WesternChapterCertifiedTreeWorker, Western Chapter Certified Tree Worker The pay rate for this role in California is $31.51 to $38.37 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: https://jobs.disneycareers.com/benefits.

Can you imagine walking around the Disneyland ® Resort, knowing you help the fun stay up and running? If you're interested in doing work that makes people feel happy and safe, keep reading… We're looking for skilled, confident Electronic Technicians who have experience maintaining and repairing equipment like the rides and attractions at the Disneyland ® Resort. If this sounds like a challenge you're ready to undertake, apply today to join the team! This position currently reports to the Reliability Manager. We proudly and enthusiastically welcome Electronic Technicians with experience in the US Military. Responsibilities : You would join a unit whose mission is to keep everything working perfectly - it's all about minimizing downtime and maximizing Guest experience. Your skills will help keep the kids smiling and the parents feeling relaxed and secure. Every day as an Electronic Technician is different. On any given day or night, you might: Be called to repair circuits/assemblies at Pirates of the Caribbean Troubleshoot high-efficiency laser lighting systems for one of the Main Street parades Re-set breakers on Haunted Mansion Perform preventive maintenance on the rides in Pixar Pier Repair and maintain electrical/electronic systems/assemblies on " it's a small world " Replace/install lamps and switches to keep the parks light and bright Insure the Monorail hums along with PLC preventive maintenance Work on animations like the Yeti on Matterhorn Bobsleds , on R2D2, and on The Little Mermaid - Ariel's Undersea Adventure Use your experience and know-how to spot problems before they happen Experience the Parks at night, when the Guests have left and it's just you and the rides Enjoy Disney with your exclusive Cast Member perks, including steep discounts on things people like you enjoy Basic Qualifications : We proudly and enthusiastically welcome Electronic Technicians with experience in the US Military. To be successful in this role, you will need: Technical competence, the ability to read and understand detailed instructions, blueprints, flowcharts, schematics and engineering documents, and pass all compliance necessary for technical and safety training Knowledge of control and repair of circuits and motor Sharp troubleshooting skills and comfort working alone or as part of a team Ability to evaluate the scope of a job, determine needed parts/materials, and order through authorized vendors Expertise using common hand tools, meters, gauges and other associated test and measurement equipment, as well as ability to measure current, voltage and amperage Mastery of the basic math skills needed to do the job, the ability to differentiate colors, computer literacy, and full understanding of the National Electric Code Familiarity with CCTV systems, audio/public address systems, theatrical lighting fixtures, video projectors, and wireless networks Reliable on-time behavior and the flexibility to work at night as well as on weekends/holidays Good communication skills with outside vendors as well as fellow Cast Members, a Guest/customer focus, high energy, respect for diversity, reliability, and a can-do, team-first attitude Stamina and the physical ability to undertake the job. You might walk, bicycle, bend, kneel, climb, push vehicles to re-position them for repair, work with arms/hands above shoulder level for an extended period of time, climb (sometimes as high as 200 ft.) and more, all on a regular basis Ability to use 2-way radios, learn CMMS (MAXIMO work order system), and attend/pass compliance and other training sessions to ensure correct maintenance documentation Electronic Technicians may work outdoors in all weather conditions, in an industrial workshop, in kitchens with wet/slippery surfaces, and may have occasional exposure to high temperatures, noise levels and fumes In addition to the physical tasks listed above, Electronic Technicians may need to push/pull and/or lift up to 10 lbs. constantly, up to 25 lbs. frequently, up to 75 lbs. occasionally, and rarely up to/over 100 lbs. Preferred Qualifications: 2 years of experience Ideal backgrounds include trade school, apprenticeship and related experience Preferred Education : We're more interested in your years of experience - and your mastery of the skills needed to do the job well - than a degree, but education in the field is always welcome. We proudly and enthusiastically welcome Electronic Technicians with experience in the US Military. Additional Information : SCHEDULE AVAILABILITY Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. SUBMITTING YOUR APPLICATION After clicking " Apply Now " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere, electronic, electronic technician, component-level troubleshooting, soldering The pay rate for this role in California is $36.92 to $46.45 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the employee's job-related knowledge, skills, experience and seniority or adjusted service date, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: https://jobs.disneycareers.com/benefits (https://jobs.disneycareers.com/benefits) .

Job Description Job Summary We are seeking a detail-oriented and reliable Warehouse Production Assembler to join a food manufacturing team. In this role, you will be responsible for assembling tofu products according to strict specifications, maintaining high-quality standards, and supporting daily production goals in a fast-paced food manufacturing environment. Details: • Job Type: Full-time, • Pay Rate: $16.90 – $18.00 per hour (depending on experience/shift) Work Schedule • Shift Options:, • 1st Shift: Start time ranges from 12 AM, 1 AM, 2 AM, 3 AM, 4 AM, 5 AM, 6 AM, 7 AM, 8 AM, 9 AM, etc., • 2nd Shift: Start time ranges from 12 PM, 1 PM, 2 PM, 3 PM, 4 PM, 5 PM, 6 PM, 7 PM, 8 PM, 9 PM, etc., • Hours: 8-hour shifts, Monday to Friday, • Availability: Must be open to working overtime and weekends as production demands require. Roles and Responsibilities • Assembly & Production: Efficiently assemble tofu products according to company specifications and recipes., • Quality Control: Maintain consistent product quality and portion control while meeting daily production quotas., • Workspace Maintenance: Keep your assigned workstation clean, sanitized, and organized in compliance with food safety standards., • Safety & Compliance: Strictly follow all workplace safety regulations, Good Manufacturing Practices (GMP), and company policies., • Team Collaboration: Assist with additional production area tasks as needed to support the team and meet daily goals. Qualifications and Requirements • Experience: Prior experience in food production, assembly, or general manufacturing is preferred but not required., • Skills: Ability to follow detailed verbal and written instructions with high attention to detail., • Teamwork: Strong communication skills and a reliable, team-player mindset., • Physical Stamina: Ability to stand for extended periods (up to 8 hours) and comfortably lift between 15 to 50 lbs as needed., • Environment: Ability to work comfortably in a fast-paced environment that can be hot and wet due to food processing. Benefits • Medical, • Dental, • Vision, • RetirementCompany DescriptionAt United Employment Solutions, we are a rapidly growing team that prioritizes quality over quantity in every aspect of our business. Our foundation is built upon the core values of Honesty, Passion, Professionalism, and Respect, principles that are championed by every member of our staff and integrated into every department. We pride ourselves on maintaining a dynamic workplace environment where innovation is the heart of our success. We don't just accept new ideas; we actively thrive on them, and we encourage every employee to contribute their perspective, whether it’s a specific departmental improvement or a visionary concept for the entire company. Beyond a collaborative culture, we offer a comprehensive benefits package designed to support your well-being, including Medical coverage with company contributions, affordable Dental and Vision insurance, and company-sponsored Life Insurance. Our team also enjoys robust time-off benefits, including paid holidays, vacation pay, and five annual sick days. If you are looking for a professional home that values your voice and your growth, we invite you to come join our team!At United Employment Solutions, we are a rapidly growing team that prioritizes quality over quantity in every aspect of our business. Our foundation is built upon the core values of Honesty, Passion, Professionalism, and Respect, principles that are championed by every member of our staff and integrated into every department. We pride ourselves on maintaining a dynamic workplace environment where innovation is the heart of our success. We don't just accept new ideas; we actively thrive on them, and we encourage every employee to contribute their perspective, whether it’s a specific departmental improvement or a visionary concept for the entire company. Beyond a collaborative culture, we offer a comprehensive benefits package designed to support your well-being, including Medical coverage with company contributions, affordable Dental and Vision insurance, and company-sponsored Life Insurance. Our team also enjoys robust time-off benefits, including paid holidays, vacation pay, and five annual sick days. If you are looking for a professional home that values your voice and your growth, we invite you to come join our team!

Job Description Shipping and Receiving Clerk and Customer Service Rep, 1st Shift at local Fullerton, CA warehouse facility. This position requires ability to work independently in a busy small office environment and includes checking drivers in/out with required documentation, answering phones, communicating via email and scheduling appointments, communicating with warehouse, good customer service skills, detailed data entry of processing orders and receivers with general clerical duties. Required skills include attention to detail, multi-tasking and ability to work in a fast paced environment with good communication skills and email capability. This is a full time position Monday thru Friday 7am to 3:30pm. Apply now with references and get onboard immediately with a family owned company that cares about customer service!