Cdl b jobs in Dallas, Texas - Page 4Create job alerts

Job Description Company Info Circular Services, the largest privately held recycling and organics provider in the U.S., strengthens this mission through its national scale and long-term municipal partnerships. It operates over 25 facilities serving major long-term municipal and commercial contracts. The mission of Circular Services is to keep valuable materials in circulation and minimize the cost and environmental impact of landfills. The company services municipal contracts with some of the largest and fastest growing cities in the U.S. including New York City, Austin, San Antonio, and Phoenix. About the Role: The Class B FEL Driver operates a truck that collects and transports recyclable materials to and from specified destinations. Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. • Operates a Front-End Load (FEL) commercial recycling collection truck and ancillary equipment on assigned route/s to commercial container customers, while providing excellent customer service, • Deliver recyclables to designated recycling/drop-off facility, • Load recyclables using automated FEL to service 2 yard to 8-yard commercial containers, • Properly operates joystick to control front loading arms and forks to connect to container, watching for unintended contact with obstructions around the FEL container, • Safely raise the container to unload into the truck hopper, makes sure adequate overhead clearance ensures no contact with structures, power lines, date lines or trees that may cause damage or injury, • Practice proper backing procedures after servicing the container using cameras making sure back up alarms are working properly, • Prepares, receives, and provides appropriate documentation for the delivery and pickup of containers to ensure timely service, • Loads, secures, and unloads truck and follows all safety procedures at recycling facility, • Maintains radio or telephone communications with dispatcher and supervisor to receive instructions or notice of changes concerning deliveries or pickups, • Complies with all mandatory safety meetings & briefings, operational standards & policies, and maintains a valid Texas CDL and DOT medical card, • Maintains route sheets, completes pre-trip/post trip inspections and reports vehicle inspection records, and follows all federal and state DOT regulations daily, • Maintains route quality safety and service standards, • Maintains clean vehicle interior and exterior, • Communicates vehicle mechanical problems immediately, • Operates truck and equipment using prescribed techniques to eliminate Driver induced mechanical failures, • Responsible for completing daily pre & post trip inspections, • At least 3 years of satisfactory driving experience of Class A or B vehicles preferred, • Excellent communication skills and ability to deal professionally with customers, dispatchers, mechanics, and other drivers, • Ability to perform simple mathematical calculations, • Excellent driving skills, • Computer Skills: Basic use of Tablets and Applications, • Pass drug screen and criminal background check, • Successfully complete and pass a written and road test, • Must be at least 18 years of age, • Legally eligible to work in the United States., • Ability to perform physical requirements of the position with or without reasonable accommodation The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the Must be able to pass a DOT physical • Must be able to climb into and out of truck several times per day using three points of contact, • Must be able to sit for extended periods as well as walk for short periods, • Must be able to bend, stoop, crawl, and squat to perform a full inspection of the underside of the truck and inspect tires for adequate inflation and potential damage, • Must be able to work outside for short periods of time in all types of weather, • Must be able to see and hear proficiently to operate a commercial motor vehicle in a safe manner Benefits: • Paid Parental Leave, • Health insurance, • Dental insurance, • Vision insurance, • HSA/ FSA, • Paid time off, • Employee Assistance Program, • 401k matching, • Tuition Reimbursement EEOC: Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.

Job Description Job Summary: Provides exceptional customer service while inspecting, repairing, and providing maintenance to trucks, trailers, and attachments for On-Highway vehicles. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots, diagnosis, and repairs On-Highway trucks both Cat and OEM, • Performs engine and related equipment repairs on Trucks and Trailers, • Disassembles, inspects, determines parts required, and reassembles to factory specifications within TRGs, • Adheres to contamination control and HAZMAT rules and regulations, • Provides quality control/assurance inspections of completed tasks to include road testing, • Uses computers and related software to assist in diagnosing and reprograming engines, • Completes documentation for service reports, timecards, parts requisition and returns, • Maintains all company equipment, tools, and vehicles in a good, clean, and working order, • Interprets and utilizes information from operating, maintenance, online resources, and service manuals/bulletins, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Travels to and from the job site and travels to retrieve parts, • Listens and understands customer complaints, quotes and explains repair costs, and schedules appointments with customers while providing clear communications, • Orders parts needed to complete repairs, • Completes and files documentation necessary to justify billing, • Responds to customer needs after hours when needed, • Communicates job progress to supervisor and customer as needed, • Works overtime as required by workload and customers’ needs, • Maintains a P Factor of 100% or greater, • Maintains less than .5% rework for years total sales, • Projects professionalism with both internal and external customers, including personal appearance, • Acts as a mentor and coach to lower level Technicians, • Completes all assigned Technician Training Path courses and safety training, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Knowledge and proficiency with current computer software, related hardware, and On-Highway Truck electronic systems diagnostic tooling, • Knowledge and ability to explain how various systems function on trucks and trailers, • Operation and control skills of On-Highway Trucks & Trailers, • Problem-solving and troubleshooting skills, • Verbal communication skills, • Exceptional skills in customer service, • Excellent time management and organizational skills, • Ability to follow logical troubleshooting procedures, • Ability to learn and navigate various software for both CAT and OEM, • Ability to work independently and as part of a team, • Ability to be self-starting and motivated, • Ability to operate a conventional forklift, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair and overhead crane, • Ability to operate an On-Highway Truck on public roads, • Ability to make precisely coordinated movements of the fingers of one or both hands in order to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences Education and Experience: • High school diploma or equivalent, accreditation from a technical school or an applicable skilled trades program required, • Minimum of three years of experience required, • CDL – Class A or B required, • ASE Certifications preferred, • Has met HDSI requirements for Service Field Tech 1; Ability to complete HOLT's VBL Classes, model HOLT's VBL Culture, and successfully apply the tools, • On-going Safety Training required Supervisory Responsibilities: • None Travel: • Travel up to 40% and overnight travel may be required Additional Requirements: • Must own and maintain the necessary tools to efficiently perform the job, • Must have a clean driving record Physical Requirements: • Significant amount of time sitting, standing, walking, kneeling, crouching, stooping, crawling, climbing, and reaching, • Constant movement and use of hands, this position requires good manual dexterity, • Communicates with customers, service managers, and co-workers, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Frequently lifts and moves materials and equipment up to 70 lbs., • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: • Frequently works outdoors around moving mechanical parts and exposed to weather extremes that include inclement weather, heat, cold, and humidity, • Exposure to minor burns, cuts, bites, or stings, • Exposure to small quantities of chemical, dust, steam, high-pressure water, and high speed rotating equipment, • Exposure to hazardous conditions and contaminants, • Works in an enclosed vehicle or equipment, • Works in extremely bright or inadequate lighting, • Exposure to high noise levels Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Holt CAT, the largest Caterpillar dealer of heavy equipment in the United States, is seeking an experienced Field Service Technician for the Fort Worth / Bridgeport Texas Region. The Field Service Technician's primary role is to conduct exceptional field service repairs, which include addressing problems such as pumps, hydraulics, engines, transmissions, HVAC, and electrical issues on heavy equipment like dozers, backhoes, front-end loaders, and excavators. Hours for this position will be Monday thru Friday 7am to 5pm, must be able to work overtime. Must have a valid driver license and a good driving record. Related construction equipment experience is preferred for this role. Must be able to obtain a CDL Class B. What can HOLT offer you? A competitive salary, front-loaded PTO, 401k matching plus a profit-sharing plan, comprehensive health care benefits, tuition reimbursement, wellness rewards, gym discount, an amazing employee development program with a department devoted to your professional development allowing you to grow your skills and build your competencies to prepare you for future opportunities at HOLT, and much more! T Education and Experience: • No Less than 4 (Four) years of diesel-powered heavy construction equipment repair experience in a field environment preferred, • CATERPILLAR Dirt Machinery Experience Required, • Ability to troubleshoot, diagnose, and repair equipment using electronic and manual equipment to determine failure., • Able to document all work orders properly, • Must be able to troubleshoot and diagnose Tier 4 systems., • Must b able to troubleshoot and diagnose EGR systems, • MSHA certification preferred, • Air conditioning certification preferred, • Crane/Rigger certifications preferred, • High school diploma or equivalent preferred, • Valid Driver’s license required, • Ability to obtain a valid Commercial Driver's License (CDL) and must have an acceptable driving record, • Must have all required mechanic hand and pneumatic tools (metric/standard), • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs advanced repairs and advanced troubleshooting offsite with minimal supervision, • Performs advanced troubleshooting and advanced diagnoses of equipment malfunctions and failures, • Removes and installs parts, disassembles and assembles basic components, • Tests, makes adjustments and verifies proper operation of all repairs and adjustments, • Prepares and completes all job-related documents, writes service reports, orders parts, and maintains clear customer records; in addition, accesses databases required to complete job, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Maintains service vehicle inspection records, daily inspections and driver logs as required by the Department of Transportation, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicle in a good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Completes assigned jobs and task to meet flat rate time and re-work standards, • Works overtime as required by workload and customers’ needs, • Completes all assigned Technician Training Path courses and safety training in a timely and proficient manner, • Projects professionalism with both internal and external customers, including personal appearance; may be relied upon to act as a mentor to lower level Technicians, • Requires regular and punctual employee attendance, • Knowledge of safe work procedures and practices, • Moderate to Expert knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Moderate to Expert knowledge of hydraulics, transmissions, engines, undercarriage, and electrical, • Proficient with current computer software, related hardware, and basic knowledge of machine electronic systems, • Exceptional skills in customer service, • Advanced diagnostic and troubleshooting skills, Knowledge of CAT ET and CAT SiS 2.0 preferred, • Planning and organizing skills to prioritize and plan work activities; uses time efficiently; plans for additional resources, • Operation and control skills of equipment or systems, • Equipment selection skills to determine the kind of tools and equipment needed to do a job, • Ability to communicate clearly and effectively, both verbally and in writing, • Ability to operate a crane and forklift, and obtain required certifications/licenses, • Ability to meet deadlines and work under fast-paced, time-constraining circumstances, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 80 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet, and climb up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work #LI-HCT LI-JH1 #ZR#JH #CAT #Caterpillar #HOLTCAT #heavyequipment #dozer #excavator #motorgrader #scrapper #skidsteer #loader

Job DescriptionJob Summary Reporting to the Area Manager/Regional Program Director, the CDL Program Director is responsible for providing leadership for the CDL Program. The CDL Program Director provides subject matter expertise and actively participates in curriculum development, revision, and implementation process. As the subject matter expert in a particular program, the CDL Program Director provides product knowledge training to the Account management group, utilizing materials generated via the centralized curriculum development process. This position is responsive to the Account management staff when asked to engage with potential students and actively participates in new student orientation. The CDL Program Director is responsible for hiring, assigning, orienting, developing, evaluating, and recognizing Driver Trainers within the program(s) of study. The CDL Program Director will convene meetings with faculty on a regular basis. The CDL Program Director is also responsible for monitoring and supporting the student population within his/her program of study. The CDL Program Director plays an active role in the student advising process, including advising students during the provisional period, meeting with students who initiate a complaint, advising students who have career-oriented questions, and consulting with students whose engagement and/or academic progress is in question. The CDL Program Director analyzes student population data, working with faculty and staff to identify students who may be at risk, and contacting students to identify barriers to success and to provide support and information concerning student services. Finally, the CDL Program Director is responsible for continuous improvement of the program. Actively engaged in the development and maintenance of the campus effectiveness plan, the CDL Program Director collects data for purposes of analyzing program performance. Key Responsibilities I. Provides Services to Students * Supplements Driver Trainer advising for students receiving failing assessments. * Provides academic advising as needed to students. Provides referrals to outside resources when counseling needs go beyond the scope of the school. Provides or arranges for student tutoring when needed. * Leads student retention initiatives for students in the program who experience barriers to success. * Maintains regular contact with all students within the program area and responds to their questions and/or concerns in a timely manner. Posts office hours for students. * Refers students to appropriate staff for non-academic problem resolution. * Contacts students who miss days from class or whose absence during the week results in more than four absences during the course. * Maintains records of interactions and correspondence with students (i.e. phone calls, emails, mail). * Monitors contact, and results of contact, from Driver Trainers to students in assigned program area(s). Makes calls weekly to students who (a) were not called or could not be reached; (b) did not return as promised; or (c) did not offer plans to return by a specific date. Offers appropriate academic advice and demonstrates genuine interest in students. * Identifies students needing tutoring. II. Oversees Status of Quality of Curriculum, Instructional Materials, Equipment, and Facilities * Serves as a subject matter expert regarding academic curriculum for program area. * Actively participates in the curriculum development/revision process led by the Home Office Executive team. * Provides leadership in the implementation of new and revised curriculum. * Provides input into creating the master schedule regarding course sequencing, offerings, room assignments, and Driver Trainer teaching assignments. III. Oversees Faculty Performance and Development * Assists the Area Manager/Regional Program Director in the recruitment, interviewing, and hiring of faculty for program of study. * Orients, monitors, supervises, mentors, and assists new Driver Trainers. * Ensures that all program area Driver Trainers adhere to required administrative and classroom delivery duties and requirements as outlined in the job description for CDL Driver Driver Trainer. * Ensures completeness of faculty files and documentation of official transcripts, professional development, observations, and performance reviews. * Provides leadership and supports all Driver Trainers and supervises their instructional and program needs. * Observes classes within the program area and coaches Driver Trainers to continually improve instructional presentation and classroom management skills. * Conducts performance appraisals of department faculty members, including areas of strength and recommendations for improvement and future skillset development. * Conducts regular weekly day and evening faculty meetings. Meeting topics may include improvement of course offerings, methods of instructional delivery, selection of texts, and such other purposes which serve to improve the quality of the instructional program. Documents all meetings. * Provides departmental product knowledge training to Account management and Career Services personnel as requested. * Provides information to all departments as trends and changes in program specialty areas occur. * Assists account management personnel with student recruitment as requested. * Promotes faculty participation and provides leadership in the professional development activities of program faculty members and the documentation of those activities. * Participates actively in a minimum of one professional organization within the community. * Attends faculty meetings and in-service programs. Maintains a record of professional development activities. * Maintains current personal knowledge of federal and state institutional regulations, and accreditation standards related to program area. * Participates in preparation of government and accreditation reports and ensures their timely submission and accuracy. * Assists the Area Manager/Regional Program Director in evaluating data collected from student questionnaires and conducts faculty conferences when necessary to discuss the results and provides recommendations for improvement. * Maintains regular office hours each week to ensure consistency between day and evening policies, procedures and instruction. * Collaborates with peers and associates to ensure coordination of interdepartmental activities. * Intervenes in and works to resolve any personnel issues that arise among program area Driver Trainers. * Assists the Area Manager/Regional Program Director in planning program budgetary needs if and when applicable. * Performs all duties of a full-time Driver Trainer. IV. Leads and Develops Others * Provides clearly defined roles and objectives for driver trainers, monitors performance, provides feedback, and meets regularly to discuss priorities. * Resolves individual and group performance opportunities in a timely manner to motivate and foster teamwork. * Identifies opportunities to involve others in new and challenging work assignments that advance the skills and capabilities of individuals and the organization. Experience and Education Required * High school diploma or GED. * Industry certification in the field of instruction if required by industry, or demonstrated knowledge equivalent to the certification. * 3 years of experience in academic instruction in a post-secondary environment. * 5 years of industry experience in the field of instruction. * 2 years of experience in a management or supervisory role. * Ability to qualify as a CDL Driver /Driver Trainer. * Knowledge regarding faculty development, including requirements, delivery methods, and reporting. * Motivation, dedication, professionalism, integrity, and enthusiasm for teaching. * Ability to show sensitivity to the needs and requirements of adult learners. * Ability and desire to embrace the school’s mission. * Ability to inspire students to the highest level of achievement in preparation for meeting employer expectations. * Knowledge of industry standards and requirements within the field of instruction. * Knowledge of and ability to facilitate learning on course content within the field of instruction. * Excellent organizational skills. * Knowledge of Microsoft Office programs and database programs (CampusVue preferred). * Ability to develop and use collaborative relationships for the purpose of accomplishing work objectives; developing relationships with other individuals by listening, sharing ideas, and appreciating others' efforts. * Superior verbal and written communication skills. * Interpersonal relationship skills necessary for positive interactions with students, alumni, faculty, and employers. * Excellent creative and problem solving skills in dealing with students, alumni, employers, faculty, and staff. * Ability to meet and/or exceed defined goals. * Excellent presentation skills and ability to present ideas effectively to individuals or groups in a formal setting. * Management skills in planning, organizing, controlling and evaluating programs and policies in a dynamic and changing environment. * Knowledge of the federal FMCSA and state Department of Motor Vehicle standards. Experience and Education Preferred * Associate’s Degree or higher, documented specialized competency within the field of instruction, or equivalent work experience in the field of instruction. * 5 years of experience in academic instruction in a post-secondary environment. * 10 years of experience in the field of instruction. * Working knowledge of federal/state government education regulations. * 3 years of experience in a management or supervisory role. * Previous experience as an academic program director. * Experience in student guidance, or related fields. * Working knowledge of federal/state government regulations. Physical Demands * Mobility & Balance: Ability to frequently climb in/out of the cab, bend, squat, kneel, twist and reach to perform pre/post-trip inspections and navigate tight spaces. * Strength: Ability to crank trailer landing gear (often 100+ lbs), handle training and safety equipment, and potentially assist with loading/unloading (if applicable). * Endurance: Ability to sustain physical activity and be alert during extending driving and instructional periods, including exposure to varying weather conditions such as heat, cold, wind, rain, ice or snow. * Sensory Acuity and Overall Health: Must possess and maintain a valid DOT Medical Examiner’s Certificate and meet DOT physical qualifications required to hold a CDL, with or without reasonable accommodations, as required by Federal regulations. Specific Tasks & Considerations: * Demonstrating Skills: Physically showing students how to couple/uncouple trailers, perform inspections, and maneuver the large vehicle. * Environmental Exposure: Working outdoors in various conditions including extreme heat, cold, rain, or snow while training. Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is usually not exposed to weather conditions. The noise level in the work environment is usually moderate. Note This is not necessarily an exhaustive list of all responsibilities, skills, duties, or requirements associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or require that other or different tasks be performed when circumstances change. I have read and understand the above job description. I further understand that this is not an all-inclusive list and does not constitute a contract. My employment remains at will as with all employees of Ancora Education.

Job Description ???? Immediately Hiring – Director of Health Economics, Outcomes & Reimbursement (HEOR) ???? Remote | ???? Full-Time | ✈️ 20–30% Travel Ready to take the next step in your Market Access or HEOR career? At CDL Nuclear Technologies, we’ve been delivering innovative cardiac imaging solutions for over 30 years. Since 1992, we’ve supported more than 850 healthcare facilities nationwide and have led the way in Cardiac PET imaging for over 15 years. We offer a stable, growth-oriented environment where your expertise directly impacts patient access and clinical decision-making. ???? What You’ll Do As Director of HEOR, you’ll lead payer value communication strategies that support access and reimbursement for CDL’s cardiac imaging services across Commercial, Medicare, and Medicaid markets. You’ll drive impact by: * Translating clinical, real-world, and economic data into compelling payer value narratives * Developing payer value decks, cost-impact tools, and summary materials * Leading cost-effectiveness and budget impact analyses * Partnering with Marketing, Finance, Reimbursement, and Commercial teams * Creating objection handlers, FAQs, and field enablement tools * Monitoring payer trends (MACs, commercial insurers, CMS) * Supporting value-based contracting and payer segmentation strategies * Ensuring all materials meet legal, regulatory, and compliance standards ???? Qualifications Required: * 12+ years in pharma, biotech, or medical technology * 5+ years in HEOR, Market Access, or payer value communications * Strong understanding of U.S. payer dynamics and Medicare Part B * Ability to translate complex data into payer-facing tools * Strong communication and leadership skills Preferred: * Advanced degree (PharmD, MPH, MHA, PhD, or MBA) * Cardiovascular therapeutic experience * Experience in Market Access Strategy or Payer Account Management * Experience building health economic models * Established payer relationships ???? Critical Skills * Strategic thinking * Decision making & problem solving * Cross-functional leadership * Organization & planning * Communication excellence * Adaptability & creativity ???? Working Conditions * Primarily desk-based with periodic travel * Indoor work environment * Ability to lift/move up to 10–50 lbs * Ability to manage peak workload stress ???? What CDL Nuclear Offers * Competitive compensation * Medical, Vision & Dental Insurance * Short-Term Disability * Company-paid Long-Term Disability * Company-paid Life & AD&D Insurance * 401(k) with company match * Paid Holidays & PTO * Training & professional development * Career advancement opportunities * Employee referral program CDL Nuclear Technologies is an Equal Opportunity Employer. All employment decisions are based on individual merit and business needs.