Computer technician jobs in Clovis, CaliforniaCreate job alerts

Job DescriptionDescription: THIS IS A UNION REPRESENTED POSITION We are proud to be affiliated with the International Association of Machinists and Aerospace Workers AFL-CIO, District Lodge 190, which represents this position at our company. This means you become part of the union within 30 days of being hired and your wages and benefits are established through the CBA negotiation process. Your starting wage will be determined based on your relevant skills and experience, and you will be placed on a development plan that leads to a wage increase every six-months based on your success. You will become a Toyota Certified Service Technician after six months, and a Bronze certified technician after 18-months. You will have the opportunity to continue to progress to additional certification levels earning more pay at each step and should achieve journeyman status within a few years depending on where you start. Here's an explanation of the job: JOB OVERVIEW: At the direction of your Service Advisor, you’ll perform the diagnoses and repair of mechanical, electronic, gas/diesel and hydraulic material handling equipment while ensuring all repairs address the problem and not the symptom. You’ll also be expected to identify additional safety, mechanical and other items in need of repair when working on the equipment. These additional repairs are to be clearly documented on the work order as well as communicated directly to the customer with the goal of gaining approval to go forward with them before the work is done, or before leaving the job site if on the road. You’ll keep track of your time throughout the day to ensure correct billing of your 8 hours each day. You will work closely with your Service Advisor to mitigate when lost, and/or overtime may be incurred, and you’ll keep them updated on your job progress through the day. KEY RESPONSIBILITIES: The following list describes what a fully trained service technician will be involved in. We hire service technicians based on level of experience (I, II, III, Journeyman), so you may come in as a Shop Technician, reporting to a branch location every day with an assigned bay, or as a Road Technician where you start in our Shop then progress to an assigned territory based on your learning plan and experience, or as a Fleet Technician, where you are dedicated to a large customer with one or a few locations. Equipment Repair and Maintenance • Troubleshoot, repair, and maintain mechanical, electronic, gas/diesel and hydraulic systems on new, used and/or rental Industrial Forklifts, Aerial equipment, industrial cleaning equipment and utility vehicles/ golf carts to name a few, • Test equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications, • Determine if additional parts are needed to complete the repair or as a follow-up to preventive maintenance service and order necessary parts, • Add any additional repair work and time to the work order before closing, • Complete work orders daily, to maintain a clean “Work in Progress” report, • Return warranty parts within 48hrs of warranty repair. Ensure parts are tagged and labeled for accurate identification, • Notify customer to “Red Tag” equipment if it is not safe to use. Advise Customer of the safety issue(s) and obtain signature as acknowledgement that they are aware of safety issue(s). Notify Service Advisor, • Check and review work order for clarity, detail, and completeness prior to presenting to the customer for signature, • Regularly use personal protective equipment in the performance of each job, • Tracks parts inventory in service vehicle. Re-order parts as needed to keep vehicle stocked, • Keep van or assigned shop bay clean, organized, and ASEC compliant always, • If assigned a company vehicle, proactively stay on top of vehicle maintenance items, • Stay updated on current Toyota product(s) via on-line training, and any other information/ materials provided, • Attend all regularly scheduled service and safety meetings and complete assigned safety training on time, • Drive in accordance with established DMV and TMH driving rules and regulations, always being courteous, • Follow environmental and safety regulations, immediately reporting potential hazards that may cause injury to your supervisor, • Follow written policies and procedures in the company IIPP Program and Employee Handbook Required • 7+ years of experience as a Forklift Mechanic/Technician, • Minimum Toyota Certified classification, • High School diploma or equivalent, • Excellent written and verbal English communication skills, • Ability to work safely under pressure, take general directions and use good judgement when working independently, • Ability to work both independently and collaboratively, • Ability to shift priorities and manage multiple tasks in a fast-paced environment, • Ability to act in a way that is consistent with our values, • Basic knowledge of computer and ability to type information and take photos with a mobile device, • Ability to drive a motor vehicle and other industrial equipment if necessary to travel to customer site(s) and test equipment, • ASE certifications, • Master Certified Technician (non-Toyota considered), • Approximately 80% is spent bending, squatting, standing, or moving about the work area, • Approximately 15% could be spent driving to and from customer sites and/or forklift equipment, • Approximately 5% is spent seated at a desk, working on the telephone or at a computer terminal, • Operation of foot controls or repetitive foot movement required for driving equipment including forklift and motor vehicle, • Ability to lift 50 pounds without assistance and 100 pounds with assistance from others or utilizing a lifting device Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. The policy of RJMS Corporation is to hire, train, and promote all persons in all job groups in accordance with the law, without regard to race, color, religion, sex, sexual orientation, age, marital or military status, national origin, gender identity, the presence of any sensory, mental, or physical disability, genetic information, or any other status or characteristic protected by local, state, or federal law. RJMS CORPORATION is an equal employment opportunity and affirmative action employer.

Job Description WAWONA FROZEN FOODS ABOUT THIS COMPANY We pride ourselves on being family-owned and operated and treating our employees like family. Working at a company where safety and quality are top priorities. Every day, Wawona Frozen Foods' commitment to excellence justifies its reputation for delivering superior quality, value, and service. Wawona's state-of-the-art production methods and facilities ensure consistent high-quality products - all while maintaining the highest food safety standards as required by the USDA and state regulators. ABOUT THIS ROLE Technician for refrigeration department with ability to handle most of the needs required for the department's equipment. Works in close communication with department lead or supervisor to ensure that the daily, weekly and monthly goals are met. Monitors systems to ensure proper operation and ensures that countermeasures are followed or developed to avoid any crises that can be derived. Communicates and asks help to perform tasks critical to the system. DUTIES INCLUDE • Active participation in Wawona Frozen Foods safety program to maintain a healthy and injury-free environment., • Participate in training and company meetings to facilitate individual and company growth., • Follow all GMP, HAACP, Food Safety, Food Defense, and SQF policies and procedures., • Performs work in accordance with all quality systems requirements included in SQF policies and procedures, including Food Safety, Food Defense, HACCP, and GMP's as well as meets all company corporate requirements related to quality and food safety programs. Employee is responsible and encouraged to report Food Safety problems to personnel with authority to initiate action. Empowered to act to resolve food safety issues within their scope of work., • Intermediate ability to perform Total Productive Maintenance in any equipment that include but are not limited to repair or replacement of: Bearings, Bushings, Shafts, Gear Boxes, Greasing, Lubing, etc., • Entry-level knowledge and ability to perform and understand electrical work., • Ability to read schematics or other engineering drawings., • Intermediate ability to assess issues, troubleshoot and develop proper counter measures., • Inspects systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes., • Work as a team within department and with other departments., • 3+ years' work experience in refrigeration for a food or similar manufacturing facility, • RETA I or RETA II preferred, • Intermediate Ammonia system knowledge, including ability to do assessments, troubleshooting, fixing, and maintaining the ammonia system under some guidance for critical jobs., • Complete safety program training, including but not limited to: Ammonia systems safety, Lock Out Tag Out, Hazmat, Confined Space Entry, Hot Works, PIT, SDS/Chemical Safety, NFPA 70E, etc., • RMP/PSM program, including system configuration, site evacuation, emergency contacts and procedures., • Ability to read, write, follow instructions, and recognize similarities and difference., • Ability to do basic math, addition, subtraction, division, and multiplication., • Ability to perform operations while maintaining high level of quality and wearing appropriate proper personal protection equipment., • Ability to do continuous repetitive work., • High attention to detail, and thorough practice of note/record keeping., • Ability to work independently with minimal supervision., • Excellent listening skills and strong written and verbal communication skills, • A strong work ethic and a can-do attitude, • Self-motivated and self-starter, • Strict adherence to GMP guidelines., • Excellent time management skills and able to work under deadlines and timelines., • Ability to work with various employees and employee levels while building rapport and respect., • Ability to read, write, and understanding instructions in English., • Bilingual in Spanish preferred, • Must be punctual and regular attendance is required., • Understand and follow all color-coding rules as stated in procedures., • This position will work out of our Cedar location., • Full time employees are eligible to participate in our competitive benefit package which includes a generous 401k with company match, medical, dental and vision benefits, employer paid life insurance, employee assistance program, and voluntary life, cafeteria 125 flexible spending and dependent care accounts., • Wawona Wednesday's, End of Season Appreciation Events, T-shirts and Hats, Employee of the Month, • We learn together. We believe in supporting all employees with all the training, resources, and tools to be successful. We invest in our people, we learn together, we take the time to train, and we grow together. We celebrate OUR people and want each employee to have a long career with Wawona Frozen Foods., • We focus on building and keeping relationships, going above and beyond, and offering world-class service. Empowering each team member to make Wawona Frozen Foods better every day, come up with improvements and suggest suggestions, and help us be innovative. We are proud of our history and want to continue to leave a legacy., • Wawona Frozen Foods promotes a work environment that encourages problem-solving, collaboration, and a culture of growth. We roll up our sleeves, we get dirty, we exemplify true grit, and we support each other because we truly care about our people., • We pride ourselves on having a diverse team matching our diverse product base. We have an inclusive culture where different professional and personal perspectives, ideas, and suggestions are respected and welcomed., • We pride ourselves on the fast-paced environment that our season creates, and we recognize that if it was not for our people working hard that we would not be as successful., • We strive to deliver the best fruit products available and to be a valued partner in every one of our customer's successes. While performing the duties of this job, the employee is required to: • Work in an environment where there can be medium to loud noise and cold temperatures., • Frequent stand and walk, and use of hands, fingers, and arms to pull, reach, twist, and lift. Ability to sit and use a computer as needed., • Will spend most of the day standing, climbing, balancing, stooping, kneeling, twisting, or crawling., • Ability to talk or hear instructions over machinery, equipment, and other processing equipment., • A fast-paced environment that requires high attention to detail and minimal down time., • Occasional lifting and transporting of moderately heavy objects, such as buckets, boxes, pails, etc. Lifting requirement: Must be able to lift or move up to 50 lbs. independently., • Other duties as assigned requiring repetitive tasks, duties, or assignments., • Work flexible/varying schedules to support the team and deadlines., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus., • You may occasionally be exposed to moving mechanical parts, extreme cold, and vibration. Exposure to smell of cleaning products and agents for the sanitation of equipment and machinery regularly., • Wear appropriate personal protection equipment and adhere to dress code as outlined for working in a food manufacturing facility. Applicants must be fully authorized to work in the U.S. and physically be in the U.S. Wawona Frozen Foods is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, gender identity, or any other protected factor. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. NOTICE TO RECRUITERS, EMPLOYMENT AGENCIES, AND/OR VENDORS Please note that Wawona Frozen Foods does not accept unsolicited resumes from recruiters, employment agencies, or vendors. Without a signed Recruitment Fee Agreement, Wawona Frozen Foods will not consider or agree to payment of any referral compensation or recruiter fee. If a recruiter or agency submits a resume or candidate without Wawona Frozen Foods' authorization, Wawona Frozen Foods is without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Wawona Frozen Foods. Verbal commitments from any Wawona Frozen Food employees will not be considered binding terms. This applies to all Wawona Frozen Foods locations and offices. It is the responsibility of all third-party recruiters and vendors to know this policy.

WARFIGHTERS NEED MEDICAL WARRIORS. Saving lives is the mission-but for Special Operations medics, it's a mission fought in the shadows. These elite medical specialists don't just treat injuries; they bring life-saving expertise into the fight. From stabilizing wounded operators under enemy fire to leaping from helicopters and diving with Special Operations teams, Hospital Corpsmen in the Advanced Technical Field (HM-ATF), are trained to handle medical emergencies wherever the mission takes them. As part of an exclusive group supporting SEALs, Divers, SWCC, and EOD teams, they deliver critical care in the most extreme conditions. You might serve in one of three roles: a Search & Rescue Medical Technician, a Dive Medical Technician or as a Special Operations Independent Duty Corpsman. It's not easy to earn the title "Doc." But when warfighters put their lives on the line, they need a medical warrior by their side. Enlisted None WATCH VIDEOS ABOUT SPECIAL OPERATIONS CORPSMEN Special Operations Independent Duty Corpsman Search and Rescue Medical Technician Medical Deep Sea Diving Technician SPECIAL OPERATIONS CORPSMAN: CAREER DETAILS & REQUIREMENTS Responsibilities Those in the Hospital Corpsman Advanced Technical Field go beyond the duties of basic Hospital Corpsman, working in austere and challenging environments while saving lives. Each of the three classifications has its own responsibilities: Special Operations Independent Duty Corpsman (SOIDC) Provide advanced medical care and operational services for Marine Reconnaissance, USMC Special Operations Forces and Navy Special Operations Command personnel, like SWCC and SEALs Engage as a team member in direct action, special reconnaissance, foreign internal defense and unconventional warfare Search and Rescue Medical Technician (SMT) Rescue patients and deliver emergency care from the back of a helicopter Perform aircrew duties and En Route Care (ERC) for routine illness and emergent patients Provide relief and assistance in areas ravaged by catastrophic natural disasters Support Search and Rescue (SAR), tactical evacuation (TECEVAC), Medical Evacuation (MEDEVAC), casualty evacuation (CASEVAC) and Combat Search & Rescue (CSAR) for Navy and Marine Corps Aviation Deep Sea Diving Medical Technician (DMT) Provide basic medicine and assist medics in prevention and treatment of diving related illnesses, injuries associated with deep sea diving and hyperbaric conditions Operate, test and repair all Navy diving equipment Perform underwater inspections, harbor/port/ship security inspections, conduct ordnance searches, rescue personnel, engage in special warfare and small boat operations Operate Swimmer Delivery Vehicle Dry-Deck Shelter system and submarine Lock-in/Lock-out systems Work Environment As a Hospital Corpsman, you have the most diverse range of work environments in the Navy. Your job will likely take you all over the world-and far out of your comfort zone. If you choose to go the Hospital Corpsman Advanced Technical Field route, you will work in extreme and sometimes precarious conditions. From deep-sea diving to combat missions to flying in MH-60 Romeo helicopters, you will train outside the realm of conventional military forces to prepare for any mission. You may work independent of a physician or under supervision in this program. Training & Advancement Upon completion of initial training at Recruit Training Command Great Lakes (known as Boot Camp), you'll report for specialized training including: Hospital Corps "A" School (19 weeks) in San Antonio, Texas for training on basic principles and techniques of patient care and first aid procedures. After "A" School, HM-ATF candidates track to one of three advanced training paths: Special Operations Independent Duty Corpsman Pipeline (121 weeks) Areas of training include but are not limited to basic reconnaissance, airborne operations, combatant diving, demolitions, clinical diagnostics, advanced trauma skills, Advanced Cardiac Life Support (ACLS), basic surgical anesthesia, basic veterinary medicine and basic dental exams. Search and Rescue Medical Tech Pipeline (27 weeks) Areas of training include but are not limited to advanced fluid resuscitation, administration and management of Advanced Life Support medications, use of emergency medical equipment, rescue and recovery devices and patient handling. Medical Deep Sea Diving Tech Pipeline (28 weeks) Areas of training include but are not limited to diving physics, scuba and surface-supplied air diving, recognition and treatment of diving related illnesses. After completing your pipeline, you'll receive your first assignment. You'll go wherever you're needed, which can be anywhere in the world. Automatic promotion opportunities are available but are competitive and based on completion of pipeline. Post-Service Opportunities There's no better way to begin a successful career in health care than by serving in the medical support division of America's Navy. Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian world, such as Emergency Medical Technician (EMT), Home Health Aide, Anesthesiologist Assistant and more. Education Opportunities Beyond offering access to professional credentials and certifications, Navy technical and operational training in the medical field can translate to credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through undergraduate degree opportunities like the Navy College Program and Tuition Assistance and the Post-9/11 GI Bill. Qualifications & Requirements A high-school diploma or equivalent is required to become an Enlisted Sailor. Those seeking a position as a Hospital Corpsman must be U.S. citizens. While no college degree is required to apply for a position as a Hospital Corpsman Advanced Technical Field, a high degree of difficulty should be expected. Entry Requirements include: Vision correctable to 20/20 Normal color perception Pass a physical examination 28 years of age or younger U.S. citizen eligible for security clearance In addition to strong communication, writing and arithmetic skills, you should also have a genuine interest in providing health care, along with good use of your hands and strong physical stamina. The Minimum and Elevated Navy Physical Screening Test (PST & EPST) requirements are: For Special Operations Independent Duty Corpsman (SOIDC) Exercise Time Min. Elevated Swim 500 yards (breast or sidestroke) Unlimited 12:30 9:30 Push-up 2:00 50 75 Curl-up 2:00 50 75 Pull-up 2:00 10 15 Run 1.5 miles Unlimited 10:30 9:30 For Search and Rescue Medical Technicians (SMT) Exercise Time Min. Swim 500 yards (breast or sidestroke) Unlimited 12:00 Push-up 2:00 42 Pull-up 2:00 04 Run 1.5 miles Unlimited 12:00 For Deep Sea Diving Medical Technicians (DMT) Exercise Time Min. Swim 500 yards (breast or sidestroke) Unlimited 12:00 Push-up 2:00 50 Pull-up 2:00 06 Run 1.5 miles Unlimited 11:30 Candidates who achieve the Elevated Physical Screening Test (EPST) scores shown above may qualify for the Enlisted Bonus for Shipping (EB-SHP) program. These elevated standards must be met during your 14-day shipping PST to be eligible for the bonus. Learn more about Navy enlistment bonuses. Important personal traits for this role include maturity, resourcefulness, dependability and trustworthiness. Please note that any illegal involvement with drugs may be disqualifying. General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before. Part-Time Opportunities There are no part-time jobs as a Navy Reserve Sailor in this role. Go back to Careers to find other jobs that have a Reserve component. You can also find out more about what life is like as a Reserve Sailor in the Navy. Compare Navy Careers See how a career as a Hospital Corpsman Advanced Technical Field compares to other Navy jobs. Compare roles, pay and requirements for each job now.

Once an aircraft launches off a carrier, pilots depend on their jet's complex electronic systems to operate all areas of their craft and complete their mission.There is zero room for failure.That's why Aviation Electronics Technicians are carefully trained to maintain all aviation electronic systems

Job DescriptionCompany Description Tessenderlo Kerley, Inc. is a company of diverse businesses unified by shared values and vision. We serve the agriculture, mining, industrial and water reclamation markets with a broad range of products and technologies, worldwide. Serving these customers well is a passion and a commitment-one that the people of Tessenderlo Kerley find rewarding, empowering and meaningful. If you want the work you do to make a positive impact on the world in which we live, and work alongside innovative, quality-focused people of vision, Tessenderlo Kerley is the right place for you. Job Description Are you a hands-on Industrial maintenance professional who enjoys troubleshooting equipment, rebuilding rotating systems, and supporting safe plant operations? Do you take pride in keeping industrial systems running efficiently? If so, this is your opportunity to make an impact as a Maintenance Technician at our Fresno, California facility. At Tessenderlo Kerley, safety, integrity and operational reliability drive everything we do. We’re looking for a mechanically strong team member - and while welding experience is not required, it would be highly beneficial in this role. Why Join Us? Hands-On Impact – Maintain and repair essential plant equipment including pumps, agitators, conveyors and rotating systems. Expand Your Skillset – Welding experience (Stick, TIG, MIG) is highly valued and provides additional opportunities to contribute to fabrication and repair work. ⚙️ Grow Technically – Gain experience aligning rotating equipment, performing preventative maintenance and troubleshooting process issues. Ongoing Training & Development – Receive training in hazardous materials handling and regulatory compliance to broaden your expertise. Compensation & Benefits Hourly Pay Range: $29.26 – $31.21 per hour (based on experience, skills and qualifications) Performance Bonus: Eligible for a discretionary performance-based bonus Comprehensive benefits package including medical, dental, vision, 401(k), paid time off and more What You’ll Do ✅ Perform plant troubleshooting and maintenance to ensure safe and efficient operations. ✅ Rebuild and align rotating equipment, including pumps and other mechanical systems. ✅ Conduct preventative maintenance and maintain detailed equipment files. ✅ Maintain sufficient spare parts inventory and keep maintenance shop and storage areas clean and organized. ✅ Assist in developing and improving plant maintenance procedures. ✅ Troubleshoot and mitigate plant process issues in partnership with operations. ✅ If experienced, support fabrication and equipment repair using Stick (SMAW), TIG (GTAW) and MIG (GMAW) welding techniques on stainless steel and carbon steel. ✅ Complete HAZWOPER training and properly contain, clean, package and label hazardous waste in compliance with OSHA, EPA, RCRA, HM-126 and DOT regulations. ✅ Conduct all business in a professional manner aligned with company values and integrity. Qualifications What You’ll Bring: ✔ High School Diploma or GED is required ✔ A strong mechanical aptitude with hands-on troubleshooting skills ✔ Experience in plant maintenance (pumps, tank agitators, conveyors, elevators) preferred. ✔ Welding experience with stainless steel and carbon steel using Stick (SMAW), TIG (GTAW), and/or MIG (GMAW) is highly preferred but not required. ✔ Strong mathematical and analytical skills. ✔ Basic knowledge of chemistry is a plus. ✔ Ability to communicate professionally with team members at all levels. ✔ Computer proficiency, including MS Office and SAP. ✔ Knowledge of HAZWOPER, OSHA, PSM, RCRA and DOT regulations preferred. ✔ Willingness to work an 8-hour day shift (with weekends/overtime as needed) or 12-hour rotating swing shift (days/nights/weekends/holidays as scheduled; training on 8-hour schedule) ✔ Ability to lift 50 pounds routinely and walk up to ¼ mile throughout the workday. This is a great opportunity for someone with strong mechanical skills who wants to continue growing in a safety-focused manufacturing environment. If you bring welding experience, even better - but if you’re mechanically inclined and eager to learn, we encourage you to apply! Additional Information Why join Tessenderlo Kerley: Working at Tessenderlo Kerley • Work/life balance, • Fun and rewarding environment, • Learning, development and teamwork, • Community involvement/outreach, • Medical-Dental-Vision-Prescription (Low employee premiums!), • 401(k) plan with dollar-for-dollar matching up to the first 5% of employee contribution, • 401(k) company retirement contribution at year-end, equal to 4% of annual base salary, • Short-term incentive awards based on measured performance criteria, • Life Insurance (2x annual base salary), • Paid vacation and sick time, and 10 paid holidays per year, • Tuition Reimbursement: Up to $5,000 per calendar year (non-taxable), • Adoption Assistance: Up to $7,500 in reimbursement assistance, • Paid maternity and parental time off, • Business Travel Life & Accident Insurance, • Flexible Spending Account, • Telemedicine program for you and your dependents, • Long-Term Disability insurance

Job Summary The Laboratory Animal Resource Center (LARC) supports the research programs of the faculty by providing all services associated with the care and use of laboratory animals (includes rodents) including the purchasing/receiving, daily care and monitoring of the health of all species. The Animal Technician is responsible for the daily care of animals in accordance with applicable laws and regulations. Duties include changing cages and racks, delivering food and water in accordance to established procedures, maintaining equipment and animal housing areas according to standard operating procedures and federal and state regulations. Perform record keeping duties such as per-diems records, animal health surveillance, feed logs, temperature/humidity charts, animal receipt and disposition logs and performs other duties as assigned. LARC provides care for various species of laboratory animals housed in multiple LARC research facilities located throughout the city of San Francisco. Under direction of the Animal Resources Supervisor or assigned lead, the Animal Technician (AT) has experience, training and is capable of performing all duties within the scope of the job description for Assistant Animal Technicians. Animal Technicians performs assigned duties in a manner that achieves the LARC mission. Animal Technicians are expected to identify problems, remedy and report them immediately. Animal Technicians must ensure the proper care and use of animals and Animal Technicians must be able to perform some technical procedures required within LARC or to support the research effort. • Knowledge, Skills and Abilities:1 year of animal handling or lab animal sanitation equipment operations experience required., • Ability to communicate animal health information to appropriate personnel, maintain legible records for permanent status. All assignments require some use of computer/email., • General knowledge of feeding, caging, and space requirements for multiple species of laboratory animals used in biomedical research., • Ability and skills needed to identify animal health concerns and regulatory compliance for their assigned areas and to report conditions to veterinary staff, researchers, and compliance staff., • Full knowledge of disinfection, sanitation, and cleaning agents; knowledge and ability to use cage washers for cleaning and autoclaves for sterilization of cages., • General knowledge of federal and other licensing agencies’ regulations., • Satisfactory job performance ratings at all times during probationary employment period., • Ability to follow instructions, work independently or in shared assignments with others., • Basic computer skills (e.g.,e/mail skills, ability to scan cage barcodes, sync PDA’s for submitting Health Surveillance Reports electronically, utilize email account for work-related communications, online training, HBS timesheet submission)., • Ability to follow work rules, including no eating or drinking in animal areas, no smoking at campus facilities., • Ability to bend, squat, kneel, stand, reach above shoulder level, and move on hard surface for up to 7 hours/day., • Ability to wear personal protective equipment as required; includes protective clothing, protective glasses, safety shoes and gloves daily , face masks as required, respirator if assigned. Graduation from high school/GED, completion of training equivalent to the Assistant Laboratory Animal Technician certification of the AALAS, and one year of animal care experience; or high school graduation and two years of animal care experience in the care of an animal species appropriate to the particular job; or an equivalent combination of education and experience; and knowledge and abilities essential to the successful performance of the duties assigned to the position. • #Tier2 Travel ComplianceAll Tentative Rto Must Be Included At Time Of Submittal- Additional Requests Mid-Contract Will Not Be Accepted, • RTO must be discussed and approved by the hiring manager at time of offer., • If an Auto-Offer unit, RTO must be included and limited to 1-week total RTO. Anything over 7 days will require manager approval at time of offer., • MUST HAVE COVID VACCINATION AND BOOSTER, NO EXCEPTIONS. please confirm this upon submission., • Please attach proof of COVID Vaccination/Booster. If your candidate does not have their booster, please attach proof of appointment scheduled before start date, • Any submission that doesn’t provide proof OR confirm verbally that candidate has both, will be removed from LL and sent to Submittal Excellence distro., • All RN positions require BSN, • Must have Prior Travel within 12 months, • Prior Teaching Hospital Experience preferred, • Float Policy: At any time during assignment, resources may be reassigned to a different department, unit, or facility (within 75+ radius) if the resource satisfies the requisite Job Specifications. Please ensure this is discussion at time of submission, and time of offer., • Travel Pairs: travel pairs are allowed, but generally will not be on the same unit. Married couples may not work on the same unit, • Employment History: ANY employment with any University of California medical facility and any of their acquired facilities MUST be included with employment history, • Return Staff Policy: must be separated for a minimum of 1 year from perm position before eligible for consideration as a traveler, • Modules:, • Modules are non-billable and included in NBO hours, 8 hours of modules, • Anything over 24 hours is billable, • Modules are completed during pre-start, and annually

Turning Point of Central California, Inc. was founded in 1970. For over 50 years now, we have been transforming lives across the state of California. From Mental Health to Community Corrections, Children's Services, Housing Programs, Recovery Services, Substance Abuse Disorders & more; we serve people in need. Our desire is to see individuals reach their full potential, and create lasting change that will stand the test of time. This job will expire after 10 days. JOB SUMMARY The Nurse reports to the Regional Nurse Supervisor and Program Director and will provide direct nursing support to the clients as well as education to the Treatment Team, to the clients, and to families of clients (as appropriate) in many areas, with special attention given to the role of psychotropic medications. ESSENTIAL JOB RESPONSIBILITIES • Provide high-quality nursing services to clients with Severe Mental Illness (SMI) and dual-diagnosis individuals including: medication education and support (scheduled, walk-in, individual, groups, crisis intervention, and on-call), consultation with Psychiatrist and physicians regarding clients and medication adjustments, facilitation of blood draw for labs as ordered, assistance with medical treatments/procedures as prescribed., • Per authority of license, chart appropriate records, review medicine orders regularly, obtain appropriate physician approval, and coordinate with pharmacy as needed., • Observe client's physical condition and behavior, report significant changes to professional staff, and record clinical notes on clients., • Responsible for monitoring and observation of clients self-administer medications; (as needed or requested) administration of prescribed injections as ordered by provider; and tracking of prescribed medication and dispensing as appropriate., • Visiting clients in their homes, board and care facilities, or in other community placement locations to carry out prescribed treatment plans., • Provide services to enhance clients' development self-reliance in daily living and independent living skills., • Order supplies and check delivery; stock and maintain inventory., • Communicate closely, in a systematic fashion, with agencies and significant others involved in the rehabilitation of consumers., • Employees shall follow the reporting requirements for incidents of Child Abuse, Elder Abuse, Adult Abuse, Dependent Adult Abuse, and Tarasoff warnings per California reporting laws., • Prepare and maintain a variety of records and prepare reports including documenting services to meet all clinical program and state requirements, including Short-Doyle/Medi-Cal requirements., • Provide the Program Director with timely reports on any unusual occurrences that might impact the overall program operation or the health and safety of clients or employees., • Complete the minimum required hours of training annually per Turning Point training requirements., • Think and act quickly and efficiently in emergencies., • Will drive on company business and transport clients as needed., • Possession of a valid license as a Licensed Vocational Nurse or Psychiatric Technician as issued by the State of California., • Any combination of experience and education that could likely provide the required knowledge, skills and abilities is qualifying. A typical way to obtain the knowledge, skills and abilities would be: Supplemental college course work in behavioral or social sciences, and one year of experience performing duties comparable to a Mental Health Worker or related nursing experience., • Knowledge of basic concepts of mental illness and mental health including the physical, emotional and social needs of emotionally disturbed individuals., • Knowledge of fundamentals of psychiatric and mental health nursing care., • Knowledge of basic medical and psychiatric terminology., • Knowledge of principles and techniques involved in the care and treatment of individuals or groups of mentally ill, emotionally disturbed, or intellectually disabled patients., • Knowledge of contra-indications, side effects and signs of medication complications., • Ability to apply routine psychiatric/medical nursing care to clients with Severe Mental Illness (SMI) and Dual-Diagnosis individuals, • Recognize symptoms indicative of adverse reactions., • Communicate effectively in written and spoken English., • Ability to communicate effectively in written and spoken Spanish and/or Hmong is preferred., • Knowledge of record-keeping procedures related to client charts., • Ability to operate within Electronic Medical Records (EMR) system., • Intermediate computer skills in Microsoft Word, Excel, Outlook and PowerPoint, Office 365, Teams, Zoom and other communication/meeting platforms., • Possess a valid driver's license and have access to a dependable means of transportation that is properly insured and operated in accordance with all laws. Agency insurer authorization is required., • Ability to pass a pre-employment criminal background check., • Communicate effectively in written and spoken Spanish., • Required ability to communicate effectively with monolingual Spanish speaking clients and families for all clinical purposes., • Assist with phone calls for Spanish speaking clients., • Required to provide language translations for case managers and Physicians on a periodic basis., • Minimal adequate competency in the Spanish language as evidenced by successful passage of the TPOCC Spanish Competency Test., • Pay Range:, • Monolingual: Class 150 ($25.78 - $33.93/hour), • Bilingual: Class 155 ($27.10 - $35.66/hour), • Company paid benefits package including medical, dental, vision, Employee Assistance Program, Pension Fund and many other voluntary benefits, • Qualified non-profit for the Public Service Loan Forgiveness (PSLF) Program, • Regular work schedule (Monday through Friday, 8am - 5pm) We are a diverse, inclusive and equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, ancestry, national origin, religion, creed, age (40+), disability status, sex, gender, sexual orientation, gender identity, gender expression, medical condition, genetic information, marital status, protected military or veteran status, or any other characteristic protected by law. Turning Point of Central California, Inc. will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Turning Point of Central California, Inc. is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting the Civil Rights Department Fair Chance Act webpage. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job DescriptionDescription: Job Title: Optical Technician (Level 1) Department: Optical Reports to: Optical Manager Classification: Non-Exempt Status: Full Time GREAT PAY!! Between base hourly wage and our generous sales incentive program, our staff make an average hourly salary of $25.00!! OUR MISSION We pursue excellence in the delivery of professional, compassionate, and complete eye care. OUR VALUES • Empathy | Seek to understand others’ feelings and perspectives., • Extend Grace | Offer kindness and forgiveness., • Desire to Help People in Need | Strong sense of social responsibility., • Wants to Work | Perform your job to the best of your abilities. A successful Optical Technician (OT) is responsible for actions that support and safeguard Fogg Remington EyeCare (FRE) Standard of Patient Care. As an OT, you will juggle multi-tasks simultaneously and regularly complete ad hoc projects. The workday goes by quickly, and no two days are exactly alike. The OT should be committed to the Company's strong learning culture and creating a positive patient experience. They are responsible for assisting the optometrist or ophthalmologist in providing eye care services to patients. They perform various tasks related to eye exams, eyeglasses and contact lens fittings, and optical product dispensing. This role combines technical optical work with strong customer service to ensure patients receive high-quality vision solutions. ESSENTIAL FUNCTIONS, DUTIES, and RESPONSIBILITIES • Assist patients in selecting eyeglass frames and lenses based on prescription and lifestyle., • Accurately interpret and verify optical prescriptions written by optometrists and ophthalmologists., • Measure patients for proper frame and lens fit, including pupillary distance (PD), optical center alignment, multifocal segment location, vertex distance, and other measurements related to special design lenses such as pediatric and patients with special needs., • Adjust, repair, and fit eyeglass frames to ensure comfort and correct vision alignment., • Process frame and lens orders for patients, ensuring prescriptions, measurements, and product selections are entered accurately., • Educate and counsel patients on various types of lens designs, materials, and treatments based on prescription., • Obtain proper pupillary distance (PD) measurements, multifocal location, vertex distance, and other measurements related to, • Convert full prescription to reading prescription., • Select the proper lens style based on the computer and reading prescription., • Obtain insurance authorization and review benefits and fee schedule., • Perform balance control to show the patient's out-of-pocket cost based on the insurance fee schedule., • Review and respond to tasks, emails, and EHR tasks in a timely manner., • Troubleshoot and problem-solve patient complaints about their eyewear., • Responsible for returning defective frames to vendors when replacement frame is received., • Respond to messages received via patient portal., • Process basic billing for vision plans., • Review patient communication platforms for undelivered text notifications and contact patients with eyeglasses ready for pick-up., • Process monthly returns, obtain return authorization from the Optical Manager, and ship frames for credit., • Sort eyeglasses that have not been picked up after 30-60-90 days; disassemble if not picked up after 2nd notification., • Answer incoming calls, greet callers, provide information, transfer calls, and take messages as necessary., • Send completed jobs to various labs. Box up jobs, record lab count, remakes, and tracking numbers in an Optical binder., • Call frame vendors to order Patient frame orders and record in Optical binder., • Tray-up incoming jobs from various laboratories for Quality Control., • Check-in patient frame orders and mark them as received in Optical Management and Optical binder., • Put price tags on all stock frames and display them on frame boards by the vendor., • Responsible for sending vendor invoices to the Accounting Department by the end of each week., • Responsible for sending outside prescriptions to be scanned and saved in the patient's Electronic Health Record (EHR) at the end of each week., • Ability to read simple prescription (SV, Bifocal, and Progressive)., • Responsible for making sure that all invoices show no charges for any remakes and to report any discrepancies to Optical Manager., • Dispense with or without adjustments. Obtain patient e-signature in PM and show dispensed data in OM., • Conduct daily frame inventory of display frame boards. Morning and evening counts must match the frame count on the daily frame inventory form., • Cross-train in relevant/related functions and roles as necessary, and assist/train other staff in related functions as needed., • Take payments., • Has not been sanctioned or excluded from participation in federal or state healthcare programs by a federal or state law enforcement, regulatory, or licensing agency., • Maintain confidentiality by safeguarding ePHI and demonstrating HIPAA compliance to our patients., • Ensure that HIPAA privacy policies are clearly understood and followed., • Present a positive view of FRE to the community., • Protect company assets., • Support all co-workers and treat them with dignity and respect., • Support the team to reach common goals., • Be able to think and act quickly and efficiently in emergencies., • May be scheduled to work at different locations as necessary, reporting to the location at beginning of the day., • May drive on company business., • Must have valid California driver’s license (required)., • Comply with all FRE policies and procedures, including but not limited to workplace safety, reporting work-related injuries, Infection Control, and preventing potential safety risks for staff, clients, and others. Education • Preferred (not required): Experience as a Dispensing Optician/Optical Technician., • The ability to work with delicate tools and materials., • Strong research and math skills., • Good interpersonal skills and the ability to communicate effectively with different audiences., • Intermediate to advanced phone skills; able to effectively relate via the telephone and in-person to serve the needs of Clinic patients/clients/visitors in an efficient and productive manner., • Strong written and verbal communication., • Ability to gracefully assist unhappy customers., • Ability to interact and work effectively with co-workers, clients, guests, volunteers, and others., • Well-spoken and polished demeanor., • Cultural sensitivity and demonstrated ability to work with diverse people groups., • Attention to detail requires a high level of accuracy and attention., • Time management and organizational skills: Prioritizing tasks, meeting deadlines, and staying organized., • Problem-solving skills: Analyzing complex problems, developing creative solutions, and making sound decisions. FRE Standards of Patient Care: • Respect: Treat all patients with respect and dignity., • Communication: Communicate clearly and effectively with patients and their families., • Safety: Ensure the safety of all patients and staff., • Quality: Provide quality care and services to all patients., • Privacy: Respect the privacy of all patients and their families. Extend Grace: Ability to put yourself in the Patient's shoes to try and understand their situation, which allows you to show compassion and understanding, making the Patient feel more comfortable and at ease. Desire to help people in need: Exhibit a strong sense of social responsibility and willingness to take action and make decisions to positively impact others in our community. Display compassion to make a difference in people's lives by going the extra mile to ensure those in need receive quality care. Wants to work: Possess a strong desire to work hard and complete tasks promptly. Show your commitment to excellence by doing what is necessary to complete the job. Contributing to achieving team goals that value collaboration, accountability, and mutual support. Invest in yourself: Take the time and effort to develop your skills and knowledge. Be open to learning new things and take on challenges that will help you grow professionally. Stay current on the latest trends and technologies in our field. Benefit of the doubt: Be open-minded and consider all sides of an issue before deciding how to proceed. Be understanding and compassionate when dealing with difficult situations. Create a positive work environment and foster better relationships with your teammates and patients. Environmental Conditions • Indoors in a typical office environment approximately ninety-five percent (95%) of the time., • Frequent computer use at the workstation for up to two hours., • Frequently work at a fast pace with unscheduled interruptions., • Use one or two hands to grasp, move, handle, control, feel, and assemble objects, tools, or controls., • Use fingers to grasp, move, or assemble very small objects., • Ability to walk, sit, stand, stoop, crouch, and climb stairs., • Ability to move and lift up to 10 pounds., • See the differences between colors, shades, and brightness., • Visual Acuity (Far/Near). ADA/FEHA: Fogg Remington EyeCare will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990 and California's Fair Employment and Housing Act. EEO: Fogg Remington EyeCare is an equal-opportunity employer. All aspects of employment, including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We celebrate diversity and are committed to creating an inclusive environment for all employees. Requirements:

About Us We are a full-service HVAC, building automation, chiller, and retrofit contractor with a reputation for combining high-quality consulting services with customized energy solutions. Our integrated, single-source solutions include turnkey in-house capabilities with design assistance, as well as engineering applications and automated control systems. Essential Duties & Responsibilities * Provide technical assistance and on-site training for team members. * Assist Field Supervisor in evaluating skills and create development plans for each technician. * Will have superior customer relations skills. * Will have one of the cleanest vehicle and proper uniform. * MSCA Star Certified. Take and complete the Star Certification Test. * Assist and train the technicians in their communication with the customer. * Provide for response to after hours and emergency service calls when the primary technician is unavailable. * Should be proactive when possible "warranty" or "credits" could arise. * Ensure compliance of team members to all safety policies and procedures. * Ensure all their quoted work is performed at or under allotted time. * Consistently attend or teach union training courses for continued education. * Should be the technical "go to" for the Team Dispatcher in the Field Supervisors absence. * Assist sales and quote department with technical information required. Qualifications * Extensive HVAC field knowledge with minimum 10 years' service field experience. * Extensive Safety knowledge and training with minimum 10 years field experience. * Effective oral and written communication skills. * Strong computer skills a plus. * Ability to organize and plan daily responsibilities effectively. #Mesa #LI-Mesa #LI-HVACjobs #LI-Onsite Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Affirmative Action Policy Please review ourAffirmative Action Policy () . Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here () . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Geographic Disclosure Compensation Range: $60 Per Hour The hourly rate is determined by the CBA/rate sheet and test results. Benefits are provided through local labor union aligned with collective bargaining agreement. Email a Friend Email a Friend Job Locations US-CA-Fresno ID 2026-47366 Company Mesa Energy Systems, Inc. Category Maintenance Position Type Full-Time Location Type Onsite Posted Date 2 months ago (1/6/2026 4:20 PM)

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Are you a skilled and highly motivated Generator Technician who is looking to learn and grow in a fast-paced, challenging job in the Telecom industry? If so, Pearce has a career for you! Our Generator Technicians service and repair commercial generators on cell phone towers in your region. This role is a great match for independent, self-starters who are willing to travel. Core Responsibilities: • Maintaining generators, diagnosing and repairing problems, installing and replacing components or entire systems, and performing additional maintenance or upgrades on out-of-season equipment, • Conducting performance checks and regular maintenance on generators to ensure proper readiness, reading and following blueprints or other design specifications to install or repair, • Install fuel and water supply lines, pumps, electrical wiring and controls, and other components, and test for proper operation, • Be responsible for responding promptly/timely to Power/Generator alarms; have the ability to be on call 24/7 if necessary and respond promptly in answering assigned phone and email Core Experience: • Two or more years of experience with generator maintenance is preferred and a minimum of one year of intense work-related experience with generator and electrical maintenance-related software, hardware, and processes, • Thorough knowledge of generator installations, maintenance, and repair of Generators; knowledge of electronic, mechanical, and electrical components; moderate computer skills At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • This position requires lifting over 50 pounds, stooping, bending, kneeling, squatting, climbing, and standing for long periods of time, • Must have the ability to inspect and/or troubleshoot equipment/alarms effectively, both visually and audibly, • Must be willing and able to drive long distances, workday, evening, or night hours; overtime, emergency callouts, weekends, and holidays as required; must assume 24-hour on-call duty when assigned and be gone from home for extended periods of time In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job DescriptionClinica Sierra Vista is excited to be one of the largest Federally Qualified Health Centers in the Nation! We’re honored to serve the men and women of the fields. We also offer care and support to the inner city, the rural and isolated, those of low, moderate, and fixed incomes, and families from an array of cultural backgrounds who speak several languages. We don’t inquire about immigration status because we simply don’t need to know. If you come to us, we will treat you like any other patient. As we grow our team, we are looking for individuals who believe the patient is always #1. Why work for us? • Competitive pay which matches your abilities and experience, • Health coverage for you and your family, • Generous number of vacation days per year, • A robust wellness plan and health club discounts, • Continuing education assistance to grow and further your talents, • 403(B) plan with company matching Intrigued? We’d love to hear from you! Please review the job details below and then click “apply.” We're looking for someone to join our team as a Pharmacy Technician. The Pharmacy Technician works under the supervision of the Pharmacist performing assigned duties in support of the Pharmacy Department with an emphasis on accuracy, timeliness, and patient safety. Essential Functions: • Performs all functions or duties under the direct supervision of the Pharmacist on duty., • Provides quality service to all patients and/or customers either by telephone, electronically or face to face., • Follows up on prescription status, including, without limitation, calling the prescriber, obtaining prior authorization, and/or determining refill status and advising patient of the same., • Gathers and accurately enters prescriptions and pertinent patient information (demographics, insurance, allergies, etc.) into the computer system., • Processes, resolves issues, and completes third party prescription claims., • Accurately fills and prepares medication order for Pharmacist verification., • Answer incoming and make outbound calls to patients, case managers, providers, insurance companies, etc., • Follows established procedures concerning quality assurance, security of controlled substances and disposal of hazardous waste and drugs, • Handle payment transactions at Point of Service (POS) and reconcile beginning and end-of-day transactions., • Maintains a neat and organized workstation and cleans pharmacy and equipment in accordance with company standards, • If applicable, may need to coordinate prescription deliveries to patients, • Checks stock to remove outdated items and processes returns to EXP in a timely manner, • CA Pharmacy Technician License, • Possess and maintain Pharmacy Technician Certification (CPhT) (preferred), • One year experience in a retail setting preferred, • Ability to make arithmetical computations rapidly and accurately, • Bilingual in Spanish/English Clinica Sierra Vista values human rights, goodwill, respect, inclusivity, equality, and recognizes that the organization derives its strength from a rich diversity of thoughts, ideas, and contributions. As leaders in healthcare industry, we aspire to be an employer of choice by promoting an organizational culture that reflects these core values. We seek to attract, develop, and retain a talented and dedicated workforce where people of diverse races, genders, religions, cultures, political affiliations and lifestyles thrive. Our goal is to create a welcoming and inclusive environment that empowers our employees to provide the highest level of service to our community of residents and businesses; they’re counting on us. Clinica Sierra Vista is an equal opportunity employer and strives to attract qualified applicants from all walks of life without regard to race, color, ethnicity, religion, national origin, age, sex, sexual orientation, gender identity, gender expression, marital status, ancestry, physical disability, mental disability, medical condition, genetic information, military and veteran status, or any other status protected under federal, state and/or local law. We aim to create an environment that celebrates and embraces the diversity of our workforce. We welcome you to join our team!

Job Description If you are a problem solver who is detail-oriented and capable of multi-tasking, we want to talk to you! We are looking for experienced technicians. WiZiX Technology Group - Field Service Technician We are looking for a qualified candidate responsible for a full range of repairs and service procedures on copiers/printers. Good communication skills, a valid driver's license with a clean DMV record, and stable work history with verifiable references are required. Some lifting necessary. Job Responsibilities: • Troubleshooting and repairing office equipment (copiers, printers, fax machines, etc.), • Providing high-quality technical support to our customer base, • Communicating with customers to ensure satisfaction, • Developing options to solve unusual problems, • Mechanical and Electrical Mindset, • IT literate, • Experience and training with Toshiba, Ricoh, Savin, Kyocera, Brother, Lexmark, and other manufacturers is desired, • Production experience is a plus Just as we aim to help our customers grow their businesses through technology, we offer our own employees growth opportunities to reach their career goals. Among our company goals, we aim to be a long-term employer. That means providing our team with the training and certification they need to keep up with the fast-changing technology our office machines, devices and software employ. About WiZiX: WiZiX Technology Group, Inc. is a leading provider of office equipment & technology solutions in California and Nevada. WiZiX offers a wide range of products, including Copiers, Printers, Scanners, and other office equipment from top brands such as Kyocera, Toshiba, Ricoh, and Brother. WiZiX also provides VoIP Phone Systems, Managed Print Services, Document Management Systems, EV Charging Stations. At WiZiX, our mission is to provide the highest level of customer service, support, and technology solutions to our clients, enabling them to focus on growing their business and achieving their goals without having to worry about their office technologies.

Job DescriptionWe are seeking a highly motivated Desktop Technician to join our collaborative, mission-driven, dynamic, and innovative campus technology team. Reporting to the onsite Desktop Lead, the Desktop Technician is responsible for delivering first and second-tier technical support for desktop software, desktop hardware, classroom technology, printing, and network-related issues to faculty, staff, and students on campus. This role requires effective communication of technical solutions in a friendly and professional manner, providing initial diagnostic and troubleshooting assistance primarily in person, and occasionally online or over the phone. Onsite Requirement: Monday-Friday in Fresno, CAEssential Job Duties • Troubleshoots and repair of laptop/desktop computers and related peripherals, • Performing preventative maintenance, deployments, swap outs and replacements., • Diagnoses and troubleshoots hardware, software, network, and system issues effectively, • Installs, sets-up, tests, and troubleshoots non-computer IT equipment such as media, video, and phone systems in the classrooms and on campus, • Configures, installs, maintains, troubleshoots; domains, user accounts, software accounts, network connectivity and wireless access, • Resolves technology-related difficulties experienced by faculty, staff, and students, • Develops and maintains desktop deployment systems to streamline the process of deploying images to endpoint devices, • Accurately inputs, assigns, and updates service requests and incidents into the IT ticket tracking system. Maintain records and generate reports as required. Respond to service requests and incidents logged through the designated ticketing system. Escalate complex service requests when necessary, • Utilizes, contributes to and approves newly created articles within the knowledge base to help resolve issues. Adhere to technical processes and procedures, • Collaborates with IT staff to resolve and manage tickets in the IT ticket tracking systemAdditional Responsibilities, • Coordinate with vendors to resolve problems, • Generate and review activity reports, • Other duties, as assignedRequired Skills/Abilities, • Ability to format, install, set up, maintain, and troubleshoot desktop and laptop computers, • Knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) and/or Google apps, • Good written and verbal communication skills, • Ability to explain technical concepts and train others in non-technical terms, • Ability to adhere to set schedules, meet deadlines, and cover shift patterns to provide the coverage needed for the client, • Ability to work collaboratively in a team environment, • A strong focus on customer service, • Good organizational skills with a keen attention to detail, • Ability to work independently and as part of a team, • Ability to manage multiple tasks and prioritize effectivelyMinimum Qualifications, • High school diploma or equivalent, • A minimum of one-year related experience in supporting personal computer hardware, software, peripherals, servers, printers, scanners, and classroom audiovisual technologyPreferred Qualifications, • Professional IT certifications such as CompTIA ITF+, A+, Network+, Server+, MCP, etc., • Associate’s degree or bachelor’s degree in computer science or a related field, • 2 or more years of related desktop experience in configuring, testing, and troubleshooting network connectivity and wireless access for computers or devices

Job Description Summary The IC&E Technician is responsible for the maintenance and repair of all instruments, control systems and electrical equipment in the power plant and the associated facilities. Perform work of high skill in the inspection repair, testing, adjustment, installation and removal of all electronic and electrical power plant equipment and systems. Primary Duties • Responsible for conducting maintenance in a safe and efficient manner in accordance with all permits and maintenance procedures., • Perform preventive maintenance duties on all major equipment and systems as well as emergency backup systems., • Maintain complete equipment files, logs, and drawings for all designated equipment., • Forecast, inventory, and reorder spare parts to maintain plant reliability. Assist in physical inventories., • Records and compiles data, completing and maintaining forms, logs, and reports., • Ensures that required inspections are performed at specified intervals and addresses and corrects any reported issues., • Participate in the administrative maintenance of the plant operating manuals, technical references, prints and diagrams and preventive/predictive maintenance records., • Inspect repair, install and remove all types of motors, generators, transformers, switches, control equipment, wiring, electrical signal and communication systems, and storage batteries, and work with electrical systems up to and including 18kV., • Repairs, replaces and cleans equipment and components. This equipment includes, but is not limited to, the gas turbine, CEMS, and other auxiliary equipment., • Adjusts functional parts of devices using hand tools., • Responsibility (Control Authority) for Safety, LOTO and preparing tags and paperwork for outages and other work situations. Responsible for issuing JHA’s, Hot Work, Confined Space, and Safe Work Permits, • Uses Common hand tools, power tools, precision measuring instruments, electrical and electronic testing devices, computer, cell phone, phone, basic office machines, forklift., • Performs other responsibilities as a team member. Additional Duties • May perform work on, troubleshoot, and maintain electrical systems up to 230kV under direction., • Requisitioning parts and supplies as necessary., • Perform various administrative functions including but not limited to: shipping, receiving, inventory issuances., • Prepares and maintains records detailing tests, repairs and maintenance as completed., • Consults manuals, schematics, wiring diagrams and engineering personnel to troubleshoot and solve equipment problems and to determine optimum equipment functioning., • Prepares and completes work orders, job safety analyses; reads, understands and follows procedures., • Complete all required training in required periodicity., • Performs other job-related duties as assigned. Working Relationships • Reports to plant Management or IC&E Lead, • Works closely with other technician positions and remote operations personnel Requirements Summary The IC&E Technician is responsible for the maintenance and repair of all instruments, control systems and electrical equipment in the power plant and the associated facilities. Perform work of high skill in the inspection repair, testing, adjustment, installation and removal of all electronic and electrical power plant equipment and systems. Primary Duties • Responsible for conducting maintenance in a safe and efficient manner in accordance with all permits and maintenance procedures., • Perform preventive maintenance duties on all major equipment and systems as well as emergency backup systems., • Maintain complete equipment files, logs, and drawings for all designated equipment., • Forecast, inventory, and reorder spare parts to maintain plant reliability. Assist in physical inventories., • Records and compiles data, completing and maintaining forms, logs, and reports., • Ensures that required inspections are performed at specified intervals and addresses and corrects any reported issues., • Participate in the administrative maintenance of the plant operating manuals, technical references, prints and diagrams and preventive/predictive maintenance records., • Inspect repair, install and remove all types of motors, generators, transformers, switches, control equipment, wiring, electrical signal and communication systems, and storage batteries, and work with electrical systems up to and including 18kV., • Repairs, replaces and cleans equipment and components. This equipment includes, but is not limited to, the gas turbine, CEMS, and other auxiliary equipment., • Adjusts functional parts of devices using hand tools., • Responsibility (Control Authority) for Safety, LOTO and preparing tags and paperwork for outages and other work situations. Responsible for issuing JHA’s, Hot Work, Confined Space, and Safe Work Permits, • Uses Common hand tools, power tools, precision measuring instruments, electrical and electronic testing devices, computer, cell phone, phone, basic office machines, forklift., • Performs other responsibilities as a team member. Additional Duties • May perform work on, troubleshoot, and maintain electrical systems up to 230kV under direction., • Requisitioning parts and supplies as necessary., • Perform various administrative functions including but not limited to: shipping, receiving, inventory issuances., • Prepares and maintains records detailing tests, repairs and maintenance as completed., • Consults manuals, schematics, wiring diagrams and engineering personnel to troubleshoot and solve equipment problems and to determine optimum equipment functioning., • Prepares and completes work orders, job safety analyses; reads, understands and follows procedures., • Complete all required training in required periodicity., • Performs other job-related duties as assigned. Working Relationships • Reports to plant Management or IC&E Lead, • Works closely with other technician positions and remote operations personnel Job Qualifications: • Education: AA from a two-year college or technical school; or equivalent years of related experience and/or training; or combination of experience and education. High school diploma or equivalent required., • Years of Experience: A minimum of 3 years of experience in an operational power generating plant, or plant related experience. Experience working in power plant maintenance or other combustion turbine/combined cycle maintenance and operation or the equivalent of job experience, education or military training. PREREQUISITE SKILLS & REQUIREMENTS:  Knowledge of machines and tools, including their design, use, repair and maintenance.  Able to perform routine mechanical maintenance on equipment, determining when and what kind of maintenance is needed.  Able to calculate figures and amounts such as measurements, proportions, percentages, area, circumference and volume; able to apply concepts of basic algebra and geometry. Able to define and solve problems, collect data, establish facts and draw valid conclusions; able to interpret a variety of instructions furnished in written, oral, diagram, or schedule format.  Able to organize work with attention to detail.  Able to analyze problems and situations and construct logical, practical and consistent solutions.  Able to focus on designated tasks despite interruptions and distractions.  Able to work effectively and efficiently with minimal supervision.  Excellent interpersonal skills; able to function as a productive and positive team member.  Computer software proficiency.  Must be available to work at any plant location as needed.  Able to provide weekend coverage on a rotational basis and work overtime and cover for absences and emergencies as needed and required; travel requiring overnight stays will be required occasionally.  Able to understand and comply with all safety rules and regulations.  Demonstrate good verbal and written communication skills with the ability to read, write, speak and understand English.  Demonstrated knowledge of all facets of power plant maintenance.  Demonstrated ability to read and interpret P&IDs, write routine reports, solve potential problems, make competent decisions in emergency situations, clearly communicate tasks and training of other personnel.  Have and maintain a valid driver’s license  Able to complete all physical requirements of the job with or without reasonable accommodation. Including using stairs, climbing ladders, and routinely carrying and moving up to 50 pounds during 12-hour shifts. In addition, must wear protective equipment in the performance of some duties (e.g. hard hats, safety glasses, full or half-faced respirators, ear protection, chemical suits, hot gloves and high voltage protective equipment, etc.). Work with hazardous materials may be required. Benefits $45 - $60 Per Hour

Job Description Licensed Pharm Tech - Claims & Prior Authorization Location Fresno, CA | Onsite COMPENSATION & SCHEDULE • $22 per hour, • Full-time, • W2 employment | Temporary (possible conversion), • Monday – Friday | 8 hour shift between 6:00AM – 7:00PM PST, • Rotating weekend coverage required ROLE IMPACT The Licensed Pharm Tech – Claims & Prior Authorization person plays a vital role in ensuring timely medication access by resolving pharmacy claims, benefit verification, and prior authorization inquiries. This position supports pharmacies, providers, and patients by delivering accurate information, compliant documentation, and efficient issue resolution. Success is measured by claims accuracy, service quality, documentation standards, and strict adherence to HIPAA and healthcare compliance regulations. Key Responsibilities • Serve as a licensed pharmacy technician resource handling inbound inquiries regarding pharmacy claims processing, benefit verification, eligibility, and prior authorizations, • Research and resolve claim rejections, third-party billing issues, and coverage discrepancies to prevent therapy delays, • Explain pharmacy benefit coverage, formulary requirements, and plan details clearly and professionally, • Accurately document case activity within the ticketing or case management system in accordance with compliance standards, • Escalate complex clinical or operational matters to pharmacists or internal support teams as appropriate, • Support omni-channel communication including phone, email, and chat Minimum Qualifications -Active Pharmacy Technician license in good standing (any state accepted) • 2+ years of experience in pharmacy operations, pharmacy benefit management (PBM), healthcare operations, or high-volume customer support, • High school diploma or GED Equipment & Work Environment • Prolonged computer use with frequent operation of keyboard, mouse, multi-line phone system, and standard office equipment, • Primarily sedentary role with occasional standing, walking, bending, and reaching, • Fast-paced healthcare support environment with productivity and accuracy standards Preferred Skills • Experience in PBM, managed care, specialty pharmacy, or healthcare call center environments, • Familiarity with pharmacy claims adjudication systems and third-party billing processes, • Strong documentation accuracy and compliance-focused mindset Legal Notice By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from CornerStone and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at: #FRISCO123 Company DescriptionCornerStone Staffing has been servicing the Dallas-Fort Worth metroplex since 1991. We are committed to supporting our community through our core values of compassion, integrity, self discipline, and faith. CornerStone currently has 11 offices across the Metroplex to serve your needs. If you are a job seeker looking for short-term supplemental income or a full-time position that will launch a new career, we can assist you in finding the right opportunity!CornerStone Staffing has been servicing the Dallas-Fort Worth metroplex since 1991. We are committed to supporting our community through our core values of compassion, integrity, self discipline, and faith.\r\n\r\nCornerStone currently has 11 offices across the Metroplex to serve your needs. If you are a job seeker looking for short-term supplemental income or a full-time position that will launch a new career, we can assist you in finding the right opportunity!

Job Description Summary The IC&E Technician is responsible for the maintenance and repair of all instruments, control systems and electrical equipment in the power plant and the associated facilities. Perform work of high skill in the inspection repair, testing, adjustment, installation and removal of all electronic and electrical power plant equipment and systems. Primary Duties · Responsible for conducting maintenance in a safe and efficient manner in accordance with all permits and maintenance procedures. · Perform preventive maintenance duties on all major equipment and systems as well as emergency backup systems. · Maintain complete equipment files, logs, and drawings for all designated equipment. · Forecast, inventory, and reorder spare parts to maintain plant reliability. Assist in physical inventories. · Records and compiles data, completing and maintaining forms, logs, and reports. · Ensures that required inspections are performed at specified intervals and addresses and corrects any reported issues. · Participate in the administrative maintenance of the plant operating manuals, technical references, prints and diagrams and preventive/predictive maintenance records. · Inspect repair, install and remove all types of motors, generators, transformers, switches, control equipment, wiring, electrical signal and communication systems, and storage batteries, and work with electrical systems up to and including 18kV. · Repairs, replaces and cleans equipment and components. This equipment includes, but is not limited to, the gas turbine, CEMS, and other auxiliary equipment. · Adjusts functional parts of devices using hand tools. · Responsibility (Control Authority) for Safety, LOTO and preparing tags and paperwork for outages and other work situations. Responsible for issuing JHA’s, Hot Work, Confined Space, and Safe Work Permits · Uses Common hand tools, power tools, precision measuring instruments, electrical and electronic testing devices, computer, cell phone, phone, basic office machines, forklift. · Performs other responsibilities as a team member. Additional Duties · May perform work on, troubleshoot, and maintain electrical systems up to 230kV under direction. · Requisitioning parts and supplies as necessary. · Perform various administrative functions including but not limited to: shipping, receiving, inventory issuances. · Prepares and maintains records detailing tests, repairs and maintenance as completed. · Consults manuals, schematics, wiring diagrams and engineering personnel to troubleshoot and solve equipment problems and to determine optimum equipment functioning. · Prepares and completes work orders, job safety analyses; reads, understands and follows procedures. · Complete all required training in required periodicity. · Performs other job-related duties as assigned. Working Relationships · Reports to plant Management or IC&E Lead · Works closely with other technician positions and remote operations personnel Job Qualifications: · Education: AA from a two-year college or technical school; or equivalent years of related experience and/or training; or combination of experience and education. High school diploma or equivalent required. · Years of Experience: A minimum of 3 years of experience in an operational power generating plant, or plant related experience. Experience working in power plant maintenance or other combustion turbine/combined cycle maintenance and operation or the equivalent of job experience, education or military training. PREREQUISITE SKILLS & REQUIREMENTS: · Knowledge of machines and tools, including their design, use, repair and maintenance. · Able to perform routine mechanical maintenance on equipment, determining when and what kind of maintenance is needed. · Able to calculate figures and amounts such as measurements, proportions, percentages, area, circumference and volume; able to apply concepts of basic algebra and geometry. Able to define and solve problems, collect data, establish facts and draw valid conclusions; able to interpret a variety of instructions furnished in written, oral, diagram, or schedule format. · Able to organize work with attention to detail. · Able to analyze problems and situations and construct logical, practical and consistent solutions. · Able to focus on designated tasks despite interruptions and distractions. · Able to work effectively and efficiently with minimal supervision. · Excellent interpersonal skills; able to function as a productive and positive team member. · Computer software proficiency. · Must be available to work at any plant location as needed. · Able to provide weekend coverage on a rotational basis and work overtime and cover for absences and emergencies as needed and required; travel requiring overnight stays will be required occasionally. · Able to understand and comply with all safety rules and regulations. · Demonstrate good verbal and written communication skills with the ability to read, write, speak and understand English. · Demonstrated knowledge of all facets of power plant maintenance. · Demonstrated ability to read and interpret P&IDs, write routine reports, solve potential problems, make competent decisions in emergency situations, clearly communicate tasks and training of other personnel. · Have and maintain a valid driver’s license · Able to complete all physical requirements of the job with or without reasonable accommodation. Including using stairs, climbing ladders, and routinely carrying and moving up to 50 pounds during 12-hour shifts. In addition, must wear protective equipment in the performance of some duties (e.g. hard hats, safety glasses, full or half-faced respirators, ear protection, chemical suits, hot gloves and high voltage protective equipment, etc.). Work with hazardous materials may be required. Safety Safety is a core value of MRP and as a condition of employment, all employees are expected to be mentally alert and work safely at all times. Additionally, employees are required to adhere to all safety warnings and posted safety signs whenever on company property.

Job DescriptionSalary: $25.00 - $33.00 / Hour SureSite Consulting Group, LLC provides complete infrastructure deployment services through its teams of real estate, planning, and engineering, environmental, project management and construction management experts. Are you a proactive person with an in-depth knowledge of construction and/or the wireless industry? If you are a factual and detail-oriented person, this job is for you! As a Field Technician at SureSite, every day can be an adventure. You will be responsible for installing/repairing various telecommunications structures and hardware. We will provide necessary training and safety is always our highest priority. You will join a remarkable, hardworking team, that works side-by-side with industry experts. As a full-time tech, you will work approximately 40-50 hours/week, Monday-Friday and will be eligible for overtime. You will also have access to medical, dental and vision benefits as well as a company matched 401K! Essential Functions: • Hardware Installation Management (60%)- Work on a crew of three or four field technicians that will be installing, erecting, maintaining, repairing, removing, or retrofitting towers, Small Cell and rooftop antenna systems. Will also perform third party inspections., • Hardware Commissioning (10%)- Commission (test) hardware in accordance with the prevailing contractual share of the responsibility, specifications and quality requirements and document progress in the applicable Site Folder. Will also learn commissioning services under direction of the Site Foreman., • Documentation (5%)- Must log all installation, test, close out and inspection results as directed by the Construction Manager or Site Foreman and report hours worked daily., • Quality (20%)- Responsible to assist in escalating all QA deficiencies to the Site Foreman or Field Technician III that cannot be cleared., • Fault and Discrepancy Reporting (5%) Manage the contents of an assigned build kit for the issuance of fault and/or discrepancy reports to document kit churn. Assist in ensuring defective components are promptly returned for replacement processing and will document and report equipment and material shortages immediately., • Other- Assists the Site Foreman or Field Technician III on the installation of all network elements installed on site and other equipment as applicable and directed by management team. Job Requirements: • At least two years of construction, wind turbine installation, computer IT, solar installation or electrical experience., • High School Diploma/GED or higher, • Some knowledge of SWEEP and PIM equipment., • Some understanding of basic architecture of antenna systems., • Understand some RF Design for telecommunication sites - basic RFDS knowledge., • Knowledge of power and hand tools for construction., • Previous experience working aloft in man lifts, and/or climbing., • Some understanding of basic RF and grounding safety standards for installation., • Basic knowledge of either civil construction or electrical work., • Ability to work on laptop with MS Office., • Understand and speak English., • Valid drivers license for the preceding 3 years, • Have no major violations in the past 3 years (A major violation is any violation of any traffic law that may result in criminal charges and/or the suspension or revocation of your drivers license. Preferred: • Anritsu / PIM / fiber testing certification, • Connector certification (Andrew, PPC, CommScope, etc.), • Reports to: Typically, will report daily to either a Site Foreman or Construction Manager. Normal Work Environment: • The work environment is physically demanding, and you need to be able to perform all of the tasks safely and efficiently., • The position requires the use of standard installation equipment i.e. power tools, DC crimpers, thermoweld, hand tools, etc., • The position will require either working aloft on cell towers, in a man-lift, bucket truck or climbing., • Some work will be under adverse conditions (e.g. high towers, inclement weather, remote sites, etc.) throughout the US using safety equipment and hand, power and specialty tools., • Must be able to transport required equipment and materials to work locations including remote areas to perform functions of the job using appropriate company and specialty vehicles., • Must have a current drivers license with satisfactory record for the last three years., • Must be able to maintain constant communication and interact successfully with team to understand project requirements., • Must work well in a team environment and be able to work with a diverse group of people., • Exhibit a strong positive attitude toward and be diplomatic in resolving issues., • Overtime required as needed., • Must have the ability to lift 50 lbs. of equipment. AAP/EEO Statement: • We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are committed to providing a workplace free from discrimination and harassment, fostering a diverse and inclusive environment where all employees can thrive.

Job Description This is a position in which we are looking to train an individual to become a Petroleum Tester. Petroleum Testers conduct annual regulatory testing at gas stations. In order to do this multiple certifications are required as well as hands on training/mentoring. No experience is required. Day to day, you will be working with one of our Petroleum Technicians or Petroleum Testers, gaining work experience and hands-on training. Responsibilities: Assist in the job duties of Petroleum Technician at general, limited or minimal supervision based on increasing levels of capabilities with increasing levels of independence. Make needed repairs and/or adjustments to fuel dispensing equipment Make repairs to equipment associated with the underground storage tanks and delivery systems (this includes alarms, sensors, and probes) Commission, troubleshoot, reset, and/or reload POS (Point of Sale) equipment Conduct regularly scheduled preventative maintenance on equipment Meet response time parameters for repair work and ensure high priority work is completed first as communicated by dispatch Ensure assigned vehicle is appropriately stocked with parts as needed Complete accurate work order reporting within required timelines Available to work “on call” as assigned (this may require unscheduled overtime, or the ability to respond to emergency situations) No phone calls please Requirements Valid driver’s license and good driving record Basic computer knowledge Strong communication skills Ability to work independently and be self-motivated Company DescriptionLC Services is a petroleum service and maintenance company that was started in 1995 and as of 2019 is employee owned. We specialize in servicing, testing, and construction of existing and new gas stations. Our installers are experienced and completely state certified, which allow us to build with extremely high quality and speed unmatched by any competitor in the industry. We are a fast-paced company that takes pride in the quality work that we do. If you are like-minded and would like to work for a company with strong growth potential, apply today.LC Services is a petroleum service and maintenance company that was started in 1995 and as of 2019 is employee owned. We specialize in servicing, testing, and construction of existing and new gas stations. Our installers are experienced and completely state certified, which allow us to build with extremely high quality and speed unmatched by any competitor in the industry.\r\n\r\nWe are a fast-paced company that takes pride in the quality work that we do. If you are like-minded and would like to work for a company with strong growth potential, apply today.

2nd shift position from 12:30am-9:30pm This Jobot Consulting Job is hosted by: Holly Leahy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $85,000 - $100,000 per year A bit about us: We are seeking a dedicated and detail-oriented Quality Technician to join our team. As a Quality Technician, you will play a critical role in ensuring the highest standards of quality in the manufacturing and assembly of cutting-edge electronics and components. This position will require you to collaborate closely with various teams to drive improvements and ensure products meet strict specifications and functional requirements. *2nd shift position from 10:30am-7:30pm Why join us? premiere medical, dental, vision, and life insurance plans 401k Inclusive, flexible work environment. We offer healthy snacks and daily catered meals, in addition to family-friendly company events featuring our CEO’s famous BBQ! Job Details Key Responsibilities: Inspect, measure, and evaluate incoming materials and components to ensure they meet established specifications. Operate and maintain precision inspection equipment, including CMM (Coordinate Measuring Machines), OMM (Optical Measuring Machines), and other quality control tools to qualify PCBs, PCBAs, and critical mechanical components for production use. Identify, assess, and document component defects, ensuring traceability for corrective actions and continuous improvement. Build, disassemble, and troubleshoot complex electronic subassemblies, ensuring they meet quality standards. Perform basic functional tests and electrical measurements to verify product functionality, including using multimeters, oscilloscopes, and other test equipment. Provide feedback and generate data from builds and inspections, collaborating with the supply chain and manufacturing teams for issue resolution and supplier performance improvements. Assist in the development of inspection methodologies and contribute to the creation of process improvements and best practices. Requirements: 3+ years of experience in a production or manufacturing environment, with a strong comfort level working in clean room environments (Class 10,000 or similar). Proficiency with computer applications, including MS Office (Excel, PowerPoint, Outlook, Word), and enterprise software tools such as Slack, Teams, or others. Experience with OMM/CMM equipment, microscopes, basic metrology tools, DMMs (Digital Multimeters), and PCBA assembly/rework equipment. Hands-on experience with AOI (Automated Optical Inspection) equipment and inspection techniques. Strong attention to detail with a quality-focused mindset and the ability to spot potential issues before they become problems. Solid understanding of electronics fundamentals, mechanical principles, SMT (Surface-Mount Technology) processes, and mechanical assembly techniques. Familiarity with IPC standards, with certification in PCB and PCBA inspection requirements preferred. Excellent problem-solving skills and the ability to work in a fast-paced, collaborative environment. If you're passionate about quality control and thrive in a hands-on environment, we invite you to apply and contribute to a high-performance, innovative team. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Job Title: Field Service Technician Reports to: Equipment Supervisor Pay: Salary is based on experience and geographic location. * * • Antigo, WI- $25.52-$30.62, • Idaho Falls, ID- $23.85-$28.62, • Pasco, WA- $27.30-$32.76, • Fresno, CA- $27.30-$32.76 The Field Service Technician is responsible for performing field and in-house service work for customers, the installation and set-up of new machines, and ensuring customer satisfaction by performing high quality work in a timely manner. Service work includes installation, repair, and maintenance of electrical, mechanical, computer, and industrial systems and controls of mechanical equipment located in production settings. Essential Duties • Install, maintain, and repair electro-mechanical equipment., • Travel to customer locations throughout North America to perform installations, maintenance, and repairs to electro-mechanical equipment., • Prepare and test all equipment before equipment is shipped to customers to ensure proper functioning and operation., • Load and unload equipment at Volm and customer facilities., • Train customers and operators on proper use of equipment sold and serviced by Volm Companies., • Troubleshoot and diagnose issues with equipment utilizing technical manuals, schematics, and diagnostics tools, visually and by sound., • Conduct phone service support on an “on-call” basis., • Document all installation and service work performed in a timely manner including expense reports, service reports, time sheets, etc., • Ability to obtain and maintain a valid US passport or passport card preferred., • Developed understanding and use of mechanical, electrical, and electronic systems, including PLC and VFD controls., • Ability to accurately read and interpret mechanical, electrical, and hydraulic drawings, schematics, and diagrams., • Strong critical thinking, troubleshooting, and analytical skills., • Ability to read and follow oral and written instructions., • Ability to handle stress and successfully perform in a fast-past environment., • The ability to establish priorities, work independently, and proceed with objectives without direct supervision., • Adaptability and flexibility to embrace new skills., • Proven ability to work collaboratively in a team environment., • Strong time management skills for efficient task allocation and meeting deadlines., • Knowledge of mechanical and electrical standards and practices normally acquired through completion of a technical certificate or equivalent combinations of education and experience., • Established experience working with material and resource planning systems, spreadsheets, word processing documents, customer management databases, and other applicable computer systems and data management software preferred., • Established experience in electro-mechanical principles, systems, and repair preferred., • Journeyman electrician license preferred., • Ability to stand, walk, and move around for extended periods of time., • Capability to lift and carry objects of various weights, ranging from light office supplies to heavy machinery components., • Proficiency in using hands, fingers, and arms for tasks such as typing, writing, operating machinery, assembling products, etc., • Sufficient visual acuity to read documents, operate equipment, and recognize details at close and distant ranges., • Ability to hear and understand verbal communication, as well as detect warning signals or equipment malfunctions., • Endurance to withstand prolonged periods of physical activity or work shifts, particularly relevant for manufacturing roles that involve repetitive tasks., • Ability to move quickly, easily, and with coordination to navigate through tight spaces, react swiftly to changing work conditions, and perform tasks that require agility., • Flexibility to bend, stoop, and reach low or high objects, particularly relevant for jobs that involve material handling or maintenance tasks., • Capability to climb ladders, stairs, or scaffolding, as required in certain manufacturing or construction environments., • Ability to perform physically demanding tasks, such as lifting, pushing, pulling, or carrying heavy objects., • Good hand-eye coordination and motor skills for tasks that require precision, such as operating machinery or using hand tools., • Adaptability to work in varying environmental conditions, such as temperature extremes, noise, dust, or fumes, depending on the nature of the job., • A Commitment to Our Purpose (COMMITTED PEOPLE) – Our mission is to serve and build up our customers, suppliers, communities, and each other, guided by the principles of our Lord Jesus Christ. The commitment to serving and building up is easily seen in those employees that exemplify this value., • Without Our Customers We Are Nothing (CUSTOMER FIRST) – We realize that we are blessed to serve our customers and without them, our company does not exist. They rely on us for their success and that is a responsibility we cannot take lightly. Our focus must be on serving them with as seamless communication and access to products as possible., • Kind, Humble and Positive (HUMBLE) – These positive traits do not mean being a doormat to others. But when a person is kind, humble and positive it comes through in their genuine caring for those around them., • A Desire For “Expert” (EXPERTS) – Our people want to be seen as the experts in their specific roles. From how we convert a bag efficiently and with highest quality, to knowledge of the product portfolio, to desiring to know more about tax or human resource policy – the desire for “expert” drives us in each of our roles., • Intentional Growth – Developing of Self and Others (PERSONAL GROWTH)– Times, tools, and customer expectations change. Our team members are interested in developing themselves and those around them. We know that a stronger team is one that makes our customers and our fellow employees happier., • Strong Work Ethic (HARD WORKERS) – The commitment to serve those around us is honorable and we respond to this by putting our strongest effort into that purpose., • High Expectations of Self and Others (HIGH EXPECTATIONS) – We expect ourselves, and those around us, to put in our best effort. When others struggle, we help them align towards perfection. When we struggle, we are open and humble to hear it and course-correct accordingly. This is a field-based role that requires frequent overnight travel, up to 75% of the time. Driver Qualification The ability to drive a company owned/leased vehicle or personal vehicle on behalf of the company is preferred. Inclusion in the company’s driver qualification program is required to drive a company owned/leased vehicle or personal vehicle. Becoming a qualified driver includes: • Agree to the company driving policies that apply to company owned/leased vehicle or personal vehicle as applicable., • Possess and maintain a valid driver license and be a minimum of 21 years of age., • Maintain an acceptable driving record, as evidenced by completion of a baseline motor vehicle record check and ongoing monitoring. Volm Companies is an equal opportunity employer and is committed to providing reasonable accommodation to qualified individuals with disabilities and other protected characteristics. If you require reasonable accommodation to perform the essential functions of the job, please inform us and we will work with you to address your needs. Benefits As a family-owned and operated company, we offer a comprehensive benefits package designed to support you and your family. We offer a strong foundation of benefits, including access to medical, dental, and vision coverage, an HSA employer contribution, and a 401k with profit sharing to secure your future. To support your overall well-being and family life, we offer additional benefits beyond the core package, such as paid vacation, wellness stipends, childcare reimbursement assistance, and much more. We are committed to continuously enhancing our benefits to meet the evolving needs of our team.

Job Description JOB DESCRIPTION JOB TITLE: Service Technician DEPARTMENT: Service REPORTS TO: Service Manager / Shop Foreman SUMMARY: This position is responsible for diagnosing, maintaining, and repairing customer vehicles. DUTIES AND RESPONSIBILITIES: • Performs maintenance and repair on customer vehicles., • Identifies problems with vehicles uses the diagnostic equipment., • Explains automotive repairs and issues and provides great customer service., • Plans repair procedures uses charts manuals and experience., • Tests the functionality of parts and systems., • Performs basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation., • Repairs and replaces brake pads, wheel bearings, sensors and other parts., • Performs routine maintenance and general mechanic work on vehicles., • Prepares to get additional certification as needed., • Learns with hands-on training., • Helps keep repair shop clean and organized., • Keeps a professional appearance., • Performs other related duties as assigned by management. SUPERVISORY RESPONSIBILITIES: • This job has no supervisory responsibilities. QUALIFICATIONS: • High school diploma or general education degree (GED), or one to three months related experience and/or training, or equivalent combination of education and experience., • Certificates, licenses and registrations required:, • Valid Driver’s License., • ASE Certifications., • Computer skills required: Reynolds and Reynolds DMS, Google Workplace (GMAIL, Docs, Sheets, Drive, Meet), • Other skills required:, • Automotive and engine repair experience or auto mechanic training required., • Ability to maintain a professional appearance and provide friendly customer service., • Must read, interpret and transcribe data in order to maintain accurate records., • Perform routine maintenance and other tasks in a fast-paced environment., • Commitment to excellence and high standards., • Excellent written and oral communication skills., • Strong organizational, problem-solving, and analytical skills., • Ability to manage priorities and workflow., • Acute attention to detail. COMPETENCIES: • Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce., • Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values., • Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Business Acumen - Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals., • Change Management - Develops workable implementation plans; Communicates changes effectively; Builds commitment and overcomes resistance; Prepares and supports those affected by change; Monitors transition and evaluates results., • Cost Consciousness - Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Delegation - Delegates work assignments; Matches the responsibility to the person; Gives authority to work independently; Sets expectations and monitors delegated activities; Provides recognition for results., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Design - Generates creative solutions; Translates concepts and information into images; Uses feedback to modify designs; Applies design principles; Demonstrates attention to detail., • Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Innovation - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention., • Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Judgement - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions., • Leadership - Exhibits confidence in self and others; Inspires and motivates others to perform well; Effectively influences actions and opinions of others; Accepts feedback from others; Gives appropriate recognition to others., • Managing People - Includes staff in planning, decision-making, facilitating and process improvement; Takes responsibility for subordinates' activities; Makes self available to staff; Provides regular performance feedback; Develops subordinates' skills and encourages growth; Solicits and applies customer feedback (internal and external); Fosters quality focus in others; Improves processes, products and services.; Continually works to improve supervisory skills., • Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity., • Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans., • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Project Management - Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness., • Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly., • Strategic Thinking - Develops strategies to achieve organizational goals; Understands organization's strengths & weaknesses; Analyzes market and competition; Identifies external threats and opportunities; Adapts strategy to changing conditions., • Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Visionary Leadership - Displays passion and optimism; Inspires respect and trust; Mobilizes others to fulfill the vision; Provides vision and inspiration to peers and subordinates., • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Continually required to stand., • Continually required to walk., • Occasionally required to sit., • Continually required to utilize hand and finger dexterity., • Occasionally required to climb, balance, bend, stoop, kneel or crawl., • Frequently required to talk or hear., • Occasionally required to taste or smell., • Occasionally exposed to wet and/or humid conditions (non-weather)., • Continually works near moving mechanical parts., • Occasionally works in high, precarious places., • Continually works around fumes, airborne particles, or toxic chemicals., • Occasionally exposed to outside weather conditions., • Frequently exposed to extreme heat or cold (non-weather)., • Occasionally exposed to bloodborne and airborne pathogens or infectious materials., • While performing the duties of this job, the noise level in the work environment is usually loud, • The employee must frequently lift and/or move up to 30 pounds, • Specific vision abilities required by this job include: close vision. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Utility Locator (Field Technician) Starting pay $23.00! More than a Job! Stake Center Locating is hiring entry level Locate Technicians to locate underground utilities, troubleshoot, and mark the ground (using paint and flags), promoting damage prevention in your community. We will train you on the job and equip you with the basic skills to be successful in our 100% paid training. What you’ll need to bring is a preference to work outdoors in all weather, a desire to work independently and an ability to problem solve with speed and accuracy. What We Offer: Since 1997, we have been on a mission to make Stake Center a great place to work. We have been working with our locators to make Stake Center the company of choice. What we offer: • Pay Rate: $23.00 per hour., • We provide late-model vehicles with a fuel card that allows you to avoid high gas prices on your daily commute. In fact, you take the vehicle home every night (for company use only)!, • PTO and paid Holidays – best in class, • We are providing vouchers that can be used on 300+ types of Red Wing safety shoes (a total of $200 after every twelve months of service)., • 401(k) with company match Key Responsibilities: We will train entry level Locating Technicians to: • Think Safety First!, • Use a laptop computer to receive, document and process tickets and email., • Read maps, interpret blueprints, and determine the best method & sequence for locating., • Use provided locate equipment & technology to accurately locate underground utilities., • Communicate effectively with peers, managers, and homeowners. Qualifications: • Eighteen years of age or older., • High school diploma or equivalent., • Valid driver license with an acceptable driving record., • Ability to walk up to 5 miles a day 2-3 times a week., • Ability to carry up to 5 lbs of electronic locating equipment for extended periods of time; lifting objects up to 25 lbs or lifting in excess of 75 lbs with tool aids., • Pass pre-employment background and drug screening. Schedule: • Will need to have the ability to work a flexible schedule (some evenings, weekends, and an occasional Holiday) as ticket/production load requires., • Employees will respond to emergency calls during scheduled on-call shift rotation. We understand what is at stake for our employees, our customers, and our customers’ customers. That is why we continually invest in our people, equipment, and technology. To us you are a professional - this is a career not just a job!

Job DescriptionDescription: The Fabrication Technician position must complete responsibilities delegated by the Fabrication & Rental manager/Foremen that include the fabrication of Skids and Maintenance of Rental boilers and related accessories. This effort involves regular contact with both internal and external parties. Our expectation is for the Fabrication Technician to be performing pressure vessel repairs, general repair of boilers, welding, pipe fitting, and other Skid buildout processes. Additionally, the Fabrication Technician will keep the scheduler of the work informed of daily work progress, maintain work areas and equipment clean and organized. Performs other related duties as required and assigned. Essential Functions The following reflects management’s definition of essential functions for this job but does not restrict the tasks that may be assigned. Management may assign or reassign duties and responsibilities to this job at any time due to reasonable accommodation or other reasons. • Must be willing to attend trainings for boiler pressure vessel welders as the schedule permits. Will keep the adequate personnel informed of ongoing tasks and problems with new and existing projects., • In general will do what it takes to make our company successful with the product lines we represent and the customers we serve. It is expected that this effort will complement and result in high quality build out and repairs of Skid Projects and the repair/installation of Boiler accessories and repairs., • Ability to work extended hours including nights and weekends as needed., • Will understand the requirements of ASME Code repairs and its impact on estimating, inspections, welding procedures and material control., • Will attend all required bi-monthly safety meetings and training as requested., • Must have good communication skills and the ability to work in a team atmosphere., • Must be certified in the 6G welding position and able to be certified as an employee of our company., • Opening and inspection of boilers, with the understanding of the design and construction., • Cleaning of the fire and watersides along with installing new gaskets. Performing refractory repairs and replacement., • Capable of reading and understanding mechanical drawings. Along with the ability to make modifications to the equipment per these drawings., • Capable of pipe fitting to ASME, state and local codes., • Evaluate basic boiler room systems (steam and hydronic), gather information and help solve problems., • Must be detail oriented in completing work orders, all required forms, summaries, and checklist daily or as required in procedures manual., • Must have strong language skills as well as industry specific vocabulary., • Basic mathematics, algebra, and formula knowledge are required., • Must have very strong reasoning and problem solving skills., • A valid driver's license is required. Must be insurable with no major infractions. Job will require some travel., • Must be a team player., • Must be able and willing to work the hours necessary to fulfill the needs and expectations of the position and our customers., • Must have the ability to provide some ASME boiler code application support as needed on the various boilers, • Must display a willingness to learn, and to expand in the position., • Must be very detailed in paperwork., • Must have some computer skills., • Other duties assigned. Competencies 1. Must have strong Communication skills, 2. Proficient in communications both verbal and written, 3. Interpersonal Skills, 4. Safety Focus, 5. Critical Thinking/Evaluation, 6. Reasoning skills, 7. Ethical conduct & practices, 8. Time Management, 9. Personal Effectiveness/Credibility, 10. Flexibility, 11. Timeliness, 12. Initiative · Computer knowledge a plus. · Welding & Pipefitting experience.

Job DescriptionDescription: Description Join the top-rated RV dealership in the nation! RV Country has been voted the People’s Choice for Best RV Dealer and certified as an Amazing Workplace. With over 60 years of success and growth and 13 locations across Washington, Oregon, Nevada, Arizona, and California, we're expanding our team of over 350 professionals. At RV Country, we're more than just a dealership; we're a community dedicated to making a difference in the lives of both our customers and employees. Join us and be part of an exciting journey! We are seeking a parts counter person for our RV Dealership. All you need is one year of parts experience to change your career path for the better. We need a reliable, professional parts counterperson to issue parts within our busy dealership. Job Responsibilities • Identify parts needs and accurately create or modify purchase orders for the appropriate vendors., • Process special order parts in the dealership system and notify the appropriate advisor, technician, or customer upon receipt., • Verify and process invoices by comparing them to purchase orders, ensuring correct quality, quantity, and pricing., • Track, document, and manage warranty returns, outside purchases, and parts received or issued., • Maintain accurate parts inventory through regular organization and ongoing cycle counts., • Strong attention to detail and accuracy when handling orders and inventory, • Ability to stay organized and manage multiple tasks, • Good communication skills, • Basic computer literacy and willingness to learn dealership systems, • Dependable, punctual, and able to work both independently and as part of a team Education and Experience • Previous RV or auto parts store experience required, • Computer and phone proficiency preferred, • Medical, dental, and vision insurance, • 401K with company match, • PTO The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, to stand and to walk. The employee is occasionally required to stoop, kneel, or crouch. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus Our company maintains a strong policy of equal employment opportunity for all associates. We hire, train, promote and compensate associates on the basis of personal and professional competence and potential for advancement without regard for race, color, religion, sex, national origin, age, marital status, disability or citizenship, as well as other classifications protected by applicable federal or state

Job Description Become the Driving Force Behind Retail Innovation as an ActionLink Certified Tech & Merchandising Pro! Step into a role where every day sparks action! As an ActionLink Certified Technician & Merchandising Representative, you’ll be the powerhouse behind flawless in‑store experiences—bringing displays to life, installing cutting‑edge technology, executing eye‑catching planograms, solving technical challenges on the spot, and supporting top retail partners across your territory. Merchandising Execution • Set product to planograms, • Build and install POP, endcaps, and visual displays, • Maintain shelves, refresh signage, and complete product audits, • Support retail staff and secure required store sign‑offsTechnical Installation & Maintenance, • Install and troubleshoot interactive displays, kiosks, AV, and security devices, • Perform light construction and fixture setup, • Document work through photos/videos, • Lead small teams during complex installs and resets, • Resolve on‑site challenges efficientlyCommunication and Reporting, • Maintain regular communication with the District Manager, • Submit same‑day reporting and feedback to clients/teams, • Process expenses in accordance with company policyWorking Environment & Physical Requirements, • Retail store settings, • Home office with reliable high‑speed internet, • Travel by vehicle and/or plane as needed, • Use of computer, phone, and standard office equipment, • Ability to sit or stand for up to 4 hours, • Lift up to 50 lbs as needed, • Climb ladders (10’+)What We Offer:, • The wage range for this position is $19.00 to $19.00 per hour commensurate with experience., • Medical, Dental, Vision, Life and Prescription Insurance Coverage, • 401(k) retirement plan with employer match, • Paid time off and paid holidays, • Travel reimbursementQualifications:, • 6+ months retail or merchandising experience; 2+ years technical installation/troubleshooting preferred, • Ability to read and execute planograms, • Strong communication skills and ability to work independently, • Flexible availability, including weekends and overnights, • Reliable transportation and valid driver’s license, • Skilled with hand and power tools; must have a cordless drill, • Proficient using levels, measuring devices, email, and retail systems

Job DescriptionSalary: $22-25 Position Summary The Inspection Technician has the most important responsibility of ensuring all systems are ready to pass inspections; this includes walking City/County officials through a recently installed and ready-to-go solar system, and fixing any issues that may arise during the inspections! Here at Better Earth, the Inspection Technicians are the anchor of a successful install. So why not be a part of the team that helps us become the fastest team in the nation? This is the perfect opportunity for someone who is interested in entering the Solar Industry, has some electrical background, and is ready to give it their all! Responsibilities: • Communicate with inspectors to ensure efficient installation, • Communicate with with coordinators/ managers, • Solve any issues that may arise regarding code and installs (this requires electrical knowledge on how to fix said issues), • Examples, • Breaker swaps, • Grounding/bonding, • Tie-ins, • Wire management, • Set up and tie off ladders for the city/county inspectors, • Help county/city inspectors with accessibility problems, • Coordinate and perform pre-inspection and on-site problem solving to ensure compliance with policy Qualifications: • Some electrical background, • Strong communication skills with multiple parties utilizing technology, • Strong analytical, creative, problem solving, and interpersonal/human relations skills, • Comfortable being and working on roofs, • Work well with others that are on your work team, • Must have a valid state driver's license, • Must have a clean driving record, • Comfort with using technology (computer, phone, email, etc.) Requirements: • Must be 21 years of age or older, • Must have a clean and valid driving record, • Must be comfortable working on roofs, • MUST have some electrical background Full Benefits Package • Health Insurance, • Dental, • Vision Full Time $22 - $25/hr depending on experience (FULL TIME HOURS) Hourly - Nonexempt

Job DescriptionSalary: $32.00 - $43.00 Hour DOE Low Voltage Installation Technician III Sebastianis a premier provider of communications and construction services in California. With more than 70 years ofexperience, Sebastian is passionate about providing people with a great place to work. Our high growth and dynamic model offers employees the opportunity for career advancement. As a family company we value the expertise and experience of our team. Job Description: The Low Voltage Technician (Level III) is a senior-level position responsible for the advanced installation, troubleshooting, and servicing of complex low-voltage systems, including communication, security, and audio-visual systems. In this role, the technician will take the lead on high-priority projects, ensuring that all installations and services meet or exceed industry standards. This position requires expert-level technical knowledge and hands-on experience to resolve complex issues, perform system diagnostics, and make recommendations for system improvements. The Level III technician will also mentor and train junior technicians, provide technical support to the team, and collaborate closely with project managers and clients to ensure successful project delivery. This role requires strong problem-solving abilities, exceptional communication skills, and the ability to manage multiple projects simultaneously while maintaining high-quality service. Job Duties: • Safely wire, install, and program low voltage products per project guidelines on an enterprise level., • Promptly troubleshoot and diagnose hardware, software and network problems, • Knowledge of Phone-Off premise/ Cloud solutions, • Advanced knowledge of Audio-visual installation and programing., • Complete all required paperwork and reports as required, • Represent Sebastian in a professional manner including appearance, promptness, thoroughness, jobsite cleanliness, courtesy and other relevant behavior, • Effectively communicate the arrival time and job scope with customers, • Keep an accurate accounting of all tools, equipment, and materials, • Complete safety documentation and vehicle inspections on-time and accurately, • Stay abreast of new technologies and upgrades, • Program & troubleshoot, in detail, low voltage equipment, including: burglar alarm, business phone systems, access control, CCTV, A/V, etc., • Upsell and/or cross-sell Sebastian products and services to both new and existing customers, • Other duties and responsibilities may be assigned as necessary. Job Requirements: • Minimum of 5+ years experience in 75% of our products and services required, • Fire-FLS safety certification preferred., • Experience with programming one or more of our products, • Excellent troubleshooting skills & ability to diagnose and fix hardware/ software/ network issue, • Proficient in using a variety of resources (Internet, vendor support, etc.) to research issues, • Ability to read and dissect blue print floor plans, • Must have a high School diploma or equivalent, • Basic computer and software skills (Microsoft Office and other applications), • Willing to travel and work occasional overtime/ weekend hours, • Willing to work both private and prevailing wage projects, • Ability to work well independently and with others, • Must comply with all company policies and safety procedures, • Excellent oral and written communication skills, • Actively participate in a team environment and practice the Corporate and Spirit of 46 values., • Valid California drivers license and favorable DMV record. Physical, Mental and Environmental Requirements: • All requirements may be modified to reasonably accommodate individuals with disabilities., • Must be able to climb ladders, sit, bend, stoop, stand or walk for extended periods., • Must be available to work overtime, varied shifts and assume on-call duties as required., • Ability to work in temperature extremes ranging from +20o to +105o, • Ability to lift and/or pull up to 120 lbs. Compliance: • If you need an accommodation as part of the employment process, please contact Human Resources., • Sebastian is an Equal Opportunity Employer, including disabled and veterans., • If you want to view thePay Transparency Policy Statement, please click the link:English

Job DescriptionSalary: $33.00 - $38.00 / Hour SureSite Consulting Group, LLC provides complete infrastructure deployment services through its teams of real estate, planning, and engineering, environmental, project management and construction management experts. We are currently looking for a Construction Field Technician III / Foreman to be responsible for network element deployment during the telecom implementation (TI) phase of the project. Typically, the Construction Field Technician III / Foreman will run a 2 or 3 construction field technician crew that performs mostly hardware delivery and installation of the product. The Construction Field Technician III / Foreman will ensure that all work is completed to the satisfaction of the customer in accordance with defined specifications and technical standards and those requirements for health, safety and quality are maintained at the highest levels throughout the implementation cycle. The responsibility of this position is managing specialized work efficiently, with confidence and competence. The position requires above average attention to details, concern for the exact correctness of work, and strong commitment to tasks completed on time. The person in this position will take work seriously, has a strong sense of duty, and is disciplined.A somewhat faster-than-average pace will be the norm for this position. Detailed, specialized work is the major focus. The person in this position will require clearly defined work, responsibilities, and reporting relationships, ongoing and thorough training opportunities to develop expertise and increase confidence, and frequently expressed appreciation of the person's competence, conscientiousness, and loyalty. The position will provide security in a stable work environment, allowing the person to plan for, focus on and complete tasks on hand. When changes in the nature of the work occur, the person in this position will need direction, training and support. The position will generally be task oriented, requiring someone with a conservative, careful, and cautious approach to work.The Construction Field Technician III / Foreman will embrace our internal core values of ethical behavior, integrity, respect for one another and commitment to fulfill our work with confidence, progressive thinking and unwavering quality. These internal values ensure our customers experience a relationship-based approach, driven to meet project goals through personnel who are trusted, professional and accountable for achieving results based on expertise and innovation. Essential Functions: • Hardware Installation Management (40%) - Lead and manage multiple crews of three or four field technicians that will be installing, erecting, maintaining, repairing, removing, or retrofit towers and rooftop antenna systems. Will also perform third party inspections., • Hardware Commissioning (10%) - Commission (test) hardware in accordance with the prevailing contractual share of the responsibility, specifications and quality requirements and document progress in the applicable Site Folder., • Documentation (20%) - Construction Field Technicians III / Foreman are responsible to log all installation, test, close out and inspection results. The Construction Field Technician III / Foreman will be responsible for reporting the crew hours for employees assigned on their crew., • Quality (20%) As the last representative on-site, the Construction Field Technician III / Foreman is responsible to assist in escalating all QA deficiencies to the Construction Field Manager or clearing the issue., • Fault and Discrepancy Reporting (10%) The Construction Field Technician III / Foreman will be responsible for managing the contents of an assigned commissioning kit for the issuance of fault and/or discrepancy reports to document kit churn. He/she will assist in ensuring defective components are promptly returned for replacement processing and will document and report equipment and material shortages immediately. The Construction Field Technician III / Foreman will be responsible for assisting the Construction Field Manager on the installation of all network elements installed on site and other equipment as applicable and directed by the Construction Field Manager. Job Requirements: • At least five years of wireless industry experience., • Job related certifications safety, rescue, CPR, etc., • A High School Diploma/GED or higher., • Anritzu / PIM / fiber testing certification, • Connector certification (Andrew, PPC, CommScope, etc.), • Previous experience working as a tower climber or in man lifts., • Computer skills and knowledge of SWEEP and PIM equipment., • Know basic architecture of GSM, UMTS and LTE., • Ability to review and fix discrepancies., • Understand basic RF Design for sites., • RFDS knowledge., • Ability to fabricate tower hardware and accessories to maintain, repair, and retrofit towers and antenna systems in order to support communication system operation using fixed and portable power tools and equipment., • Develop leadership skills as part of the continuous improvement in order to gain the necessary knowledge and skills in the future to train and transfer knowledge to less experienced field technicians., • Must know the basic RF and grounding safety standards for installation., • Good communication skills (interpersonal and oral)., • Good English speaking and writing skills., • Reports to: Field Construction Manager, • Supervises: Construction Field Technician I and II crew(s) Other Duties: • Some work will occasionally be under adverse conditions (e.g. high towers, inclement weather, remote sites, etc.) throughout the US using safety equipment and hand, power and specialty tools., • Able to transport required equipment and materials to work locations including remote areas to perform functions of the job using appropriate company and specialty vehicles., • In-depth understanding of telecommunications hardware installation and turfing., • Must be able to maintain constant communication and interact successfully with team and customer alike to understand project requirements., • Must work well in a team environment and be able to work with a diverse group of people., • Possess and exhibit a strong positive attitude toward customer service and be diplomatic in resolving issues., • Overtime required as needed., • Must have the ability to lift 50 lbs of equipment., • Requires the ability to work for long periods of time in a strong RF environment area., • Requires working during the maintenance window hours (9:00 pm to 6:00 am), • Job's Normal Work Environment:, • The work environment involves some physical risks and hazardous conditions., • The position requires the use of standard installation equipment for cell sites. (Power tools, DC crimpers, thermoweld, hand tools, etc.), • The position will requireworking aloft on cell towers, either in a man-lift or climbing. AAP/EEO Statement: • We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are committed to providing a workplace free from discrimination and harassment, fostering a diverse and inclusive environment where all employees can thrive.

Job DescriptionSalary: $23.86 - $37.71 /hour City Rise Traffic - Traffic Control Associate: Fresno Hourly / Non-Exempt / Full Time Salary Range: $23.86 - $37.71/hr Salary depends on Job Classification and location City Rise Traffic We are a well-established and growing company offering a competitive salary and a great benefits package for the right candidate. We service all of California from multiple locations. At City Rise Traffic, we provide high-quality traffic control safety services to construction sites, such as flagging traffic through a work site, lane closures to divert traffic, or detouring traffic to reduce traffic congestion and prevent accidents. We serve the needs of varied industries and are focused on maintaining a safe work environment for construction crews, our employees, and the public. Our focus is safety, so our customers can focus on their jobs. Brief Position Summary: A Traffic Control Associate is responsible for helping manage traffic around active work zones for road construction and utility crews. They use a paddle with "Stop" on one side and "Slow" on the other to signal drivers to slow down, stop, or proceed through the area. Often working alongside a crew leader and other technicians, they coordinate traffic flow through communication, either via two-way radios or hand signals. In some cases, they may set up barricades, cones, vehicle placements, and other devices along the roadway to enhance safety. A Traffic Control Technician must possess a valid California Drivers License with a clean driving record. Their primary responsibility is to ensure the safety of motorists, pedestrians, cyclists, workers, and themselves while on the road. Essential Functions: • Maintain a consistent and unrelenting focus on safety throughout all job functions, • Use traffic signals/signs, traffic plans, and customer requests to safely coordinate traffic flow around the work zone, • Assist in managing day-to-day work zone set up, maintenance and tear down. Meeting or exceeding customer, state, federal regulations and company expectations, • Communicate with customers, the public, and with other team members, • Keep equipment in trucks well organized and in working order, • Develop superior knowledge of work zone setup and Professional Flagging responsibilities, • Provide the highest level of customer service to all customers. This includes on-time arrival and well managed work zones, • Recognize dangers using hearing and vision, • Handle stressful situations and take safe action to avoid serious injuries to any pedestrians, vehicles, customers, and employees, • Follow company and state guidelines for effective, safe well managed work zones, • Drive company trucks as needed, • Other duties not listed may apply Journeyman Traffic Control Technician Union Requirements: Apprentice Union Requirements: Job Qualifications: • Can establish and maintain effective working relationships with coworkers and others, • Can work independently with minimum supervision, • Strong interpersonal skills and professional demeanor, • Work in high-volume outdoor locations with multiple interruptions throughout the day, • Conflict resolution techniques, • Good customer service skills, • Multitasking, problem solving, and organizational skills, • Basic computer skills required, • Flexible Schedule, • Knowledge of the Caltrans MUTCD preferred but not required, • Can read and understand traffic control plans and permits preferred but not required, • Valid CA drivers license with a clean driving record/insurable, • Experience driving medium duty vehicles and towing trailers, • Bilingual in English/Spanish a plus but not required Education: • High School Diploma preferred, • Minimum of 2 years experience in a similar role preferred, • Valid ATSSA Flagging certification. Company willing to certify in-house Physical Demands: • Lift, carry and place traffic cones to ensure the safety of the work zone. Lifting may be up to 50 lbs, • Use hands to handle, feel or reach with arms to talk, • Sit, stoop or kneel, • Lift, carry, pull, or place and assemble traffic control signs in the proper order to manage work zone traffic, • Standing/walking for long periods while flagging, in various weather conditions and different times of day/night, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Language Skills: Ability to read and comprehend instructions, correspondence, and memos. Ability to write clear instructions, explanations, and correspondence. Ability to read, understand, and implement TCPs and follow industry guidelines. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Equal Employment Opportunity and Non-Discrimination: City Rise Traffic adheres to providing equal employment opportunity and affirmative action. City Rise Traffic does not discriminate on the basis of race, color, creed, religion, national or ethnic origin, sex, gender, age, sexual orientation, marital status, pregnancy, disability, medical condition, or veteran status. Employment is contingent upon new employees verifying legal permission to work in the United States, successfully passing criminal and drug test.

Job Description WAWONA FROZEN FOODS ABOUT THIS COMPANY We pride ourselves on being family-owned and operated and treating our employees like family. Working at a company where safety and quality are top priorities. Every day, Wawona Frozen Foods' commitment to excellence justifies its reputation for delivering superior quality, value, and service. Wawona's state-of-the-art production methods and facilities ensure consistent high-quality products - all while maintaining the highest food safety standards as required by the USDA and state regulators. ABOUT THIS ROLE The role of a Quality Technician with Wawona Frozen Foods will require the ability to conduct a variety of verifications as stated in our SOPs with the goal of ensuring that the product meets minimum standards. Including, proficiently filling out required paperwork, and performing CCP checks. They will work in close communication with department lead and/or supervisor as well as other departments to provide sufficient quality feedback. DUTIES INCLUDE • Active participation in Wawona Frozen Foods safety program to maintain a healthy and injury-free environment., • Participate in training and company meetings to facilitate individual and company growth., • Follow all GMP, HAACP, Food Safety, Food Defense, and SQF policies and procedures., • Wears all required personal protective equipment., • Accountable for performing quality checks such as pit checks, grading checks or required checks in Repack or Fruit Cup departments., • CCP trained with ability to perform metal detector and magnet checks., • Ability to use computer, including CDB inventory system., • Ability to place product on hold when product is out of grade or other., • Ability to collect micro samples while preventing contamination by following SOPs., • Inspects systems, equipment, and components to identify hazards and reports findings to lead or supervisor. REQUIREMENTS • 0-2 years' experience working in a manufacturing or similar setting., • 0-2 years' experience working in Quality Control or related field., • Ability to work independently with minimal supervision., • Excellent listening skills and strong communication skills, • A strong work ethic and a can-do attitude, • Self-motivated and self-starter, • Ability to work with various employees and employee levels while building rapport and respect., • Must be punctual and regular attendance is required., • Understand and follow all color-coding rules as stated in procedures for utensils, containers, and other equipment. LOCATION • This position will work out of our Cedar or Alluvial location. BENEFITS • Competitive Medical, Dental, Vision, ADD, Life, FSA and DCAP Benefit Options, • Generous 401k with Company Match, • Paid Holidays, • Vacation and Sick Time, • Wawona Wednesday's, End of Season Appreciation Events, T-shirts and Hats, Employee of the Month, • You'll have the opportunity to work with great people and make a real impact - while being your unique, authentic self at work WHY SHOULD YOU APPLY • We learn together. We believe in supporting all employees with all the training, resources, and tools to be successful. We invest in our people, we learn together, we take the time to train, and we grow together. We celebrate OUR people and want each employee to have a long career with Wawona Frozen Foods., • We focus on building and keeping relationships, going above and beyond, and offering world-class service. Empowering each team member to make Wawona Frozen Foods better every day, come up with improvements and suggest suggestions, and help us be innovative. We are proud of our history and want to continue to leave a legacy., • Wawona Frozen Foods promotes a work environment that encourages problem-solving, collaboration, and a culture of growth. We roll up our sleeves, we get dirty, we exemplify true grit, and we support each other because we truly care about our people., • We pride ourselves on having a diverse team matching our diverse product base. We have an inclusive culture where different professional and personal perspectives, ideas, and suggestions are respected and welcomed., • We pride ourselves on the fast-paced environment that our season creates, and we recognize that if it was not for our people working hard that we would not be as successful., • We strive to deliver the best fruit products available and to be a valued partner in every one of our customer's successes., • We take the time to build a relationship with our customers and make sure we are producing and delivering the best products specific to your needs. PHYSICAL AND/OR MENTAL DEMANDS While performing the duties of this job, the employee is required to: • Work in an environment where there can be medium to loud noise and in cold temperatures., • Stand and walk, feel, reach with hands and arms. Occasionally requested to sit and talk or hear., • A fast-paced environment that requires high attention to details and minimal down time., • Occasional lifting and transporting of moderately heavy objects, such as buckets of fruit, boxes, pails, etc. Lifting requirement: Must be able to lift up to 40 lbs. independently., • Other duties as assigned requiring repetitive tasks, duties, or assignments such as sorting, packing, stacking, or cutting., • Work flexible/varying schedules to support the team, customers, and deadlines., • Specific vision abilities required by this job include peripheral vision and ability to see all colors., • You will be regularly exposed to moving mechanical parts, extreme cold, and vibration. Exposure to cleaning products and agents for the sanitation of equipment and machinery regularly., • Wear appropriate personal protection equipment and adhere to dress code as outlined for working in a food manufacturing facility. ADDITIONAL INFORMATION Applicants must be fully authorized to work in the U.S. and physically be in the U.S. Wawona Frozen Foods is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, gender identity, or any other protected factor. NOTICE TO RECRUITERS, EMPLOYMENT AGENCIES, AND/OR VENDORS Please note that Wawona Frozen Foods does not accept unsolicited resumes from recruiters, employment agencies, or vendors. Without a signed Recruitment Fee Agreement, Wawona Frozen Foods will not consider or agree to payment of any referral compensation or recruiter fee. If a recruiter or agency submits a resume or candidate without Wawona Frozen Foods' authorization, Wawona Frozen Foods is without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Wawona Frozen Foods. Verbal commitments from any Wawona Frozen Food employees will not be considered binding terms. This applies to all Wawona Frozen Foods locations and offices. It is the responsibility of all third-party recruiters and vendors to know this policy.

Job Description unWired is searching for an efficient Field Installation Technician in the Central Valley Region. This position is responsible for installing and configuring customer subscribing equipment for internet service. Essential Duties: • Install and set up customer subscribing equipment for internet service., • Install cables and wiring according to work order specifications., • Ensure cables and wiring are installed in compliance with fire codes., • Test and repair cabling using required test equipment as necessary., • Maintain accurate records for jobs completed., • Respond to customer inquiries in accordance with company guidelines., • Follow industry standards regarding safety policies and procedures., • Maintain and service trucks and maintains vehicles in a clean and orderly manner., • Schedule and deliver vehicles for maintenance and service, and maintains mileage logs., • Maintain tools in a clean and orderly manner., • Knowledge of teleprocessing security and communications networks; and knowledge of technical and user-related aspects of a personal computer environment preferred., • Advanced skill in communicating orally and in writing with the general public., • Experience in a construction type of environment is ideal., • Problem Solving: identifies and resolves problems timely; gathers and analyzes information effectively; develops alternative solutions; uses reason when dealing with emotional topics., • Communication Skills: speaks and writes clearly and persuasively in positive and negative situations; responds well to questions, presents effectively in group meetings or settings, ability to read and interpret written information., • Interpersonal Skills: focuses on solving conflict, not blaming; maintains confidentiality; listens to others without interrupting; keeps emotions under control; open to others’ ideas., • Demonstrated attention to detail., • Multi-task oriented., • Medical, Dental and Vision Insurance with company subsidies, • Company-paid Life Insurance and AD&D, • Long Term Disability Insurance, • Flexible Spending Accounts, • 401K with generous company contributions, including Profit-Sharing contributions, • Holiday, Vacation, and Sick paid time off, • Complimentary internet connectionCompany DescriptionFresno based unWired Broadband was founded in 2003 with the goal of delivering fast, reliable Internet connections to homes and businesses in rural and underserved areas. Strong demand, fueled by increasing needs for connectivity, have led to 23 years of continuous growth. We currently cover over 19,000 square miles between Corning and the base of the Grapevine. Over 200 tower sites are strategically located to cover the rural and underserved areas that have been ignored by DSL, cable and fiber carriers. Please view our privacy policy at based unWired Broadband was founded in 2003 with the goal of delivering fast, reliable Internet connections to homes and businesses in rural and underserved areas. Strong demand, fueled by increasing needs for connectivity, have led to 23 years of continuous growth. We currently cover over 19,000 square miles between Corning and the base of the Grapevine. Over 200 tower sites are strategically located to cover the rural and underserved areas that have been ignored by DSL, cable and fiber carriers.\r\n\r\nPlease view our privacy policy at

Job DescriptionZūm is a rapidly expanding Series E startup backed by industry leaders Sequoia Capital, SoftBank, Spark Capital, and GIC, with a bold mission to transform the stagnant school transportation industry. Operating in over 15 states across the United States—with flagship hubs in San Francisco, Los Angeles, and Seattle—we are actively extending our reach to the East Coast and Midwest regions. As a technology-driven company, we deploy cutting-edge solutions to manage and operate school district transportation systems while also launching our own charter platform and developing proprietary SaaS offerings. Additionally, we are spearheading a nationwide initiative to electrify school transportation fleets, simultaneously supporting local utilities by feeding much-needed energy back into the grid. We have been recognized as CNBC 50 disruptor, Financial Times 500 fastest growing companies, Fast Company World Changing Ideas. About the Role We're seeking an experienced Technician I to serve as a cornerstone of our maintenance operations. This role encompasses comprehensive vehicle diagnostics, repairs, and preventive maintenance across our fleet. You'll diagnose complex mechanical and electrical issues, perform critical safety inspections, and ensure every vehicle meets rigorous DOT and safety standards. You'll be essential to our transportation operations, keeping our fleet safe, reliable, and ready to serve students and communities. What Makes You Successful in This Role You're a skilled diagnostician who thrives in a fast-paced maintenance environment where no two days are the same. You balance speed with precision, never compromising on safety or quality standards. You're a natural problem-solver who can trace issues from symptoms to root causes across complex vehicle systems. You take ownership of your work and pride yourself on first-time fixes. You're equally comfortable rebuilding an engine, troubleshooting intricate electrical systems, or conducting thorough preventive maintenance inspections. You maintain an organized workspace where tools are properly stored, documentation is complete, and every repair meets professional standards. Responsibilities Vehicle Diagnostics & Repair ● Diagnose malfunctions and perform vehicle repairs including steering, electrical, cooling, lubricating, braking systems, drivetrains, suspensions, steering systems, clutches, transmissions, and oil, temperature, gas regulating components● Adjust, test, and rebuild engines and related assigned duties within qualification level, in accordance with all relevant Federal, State/Provincial and local guidelines and requirements● Perform test drives during Preventative Maintenance inspections to identify driver reported issues and conduct test drives after service to confirm repairs have been completed successfully ● Install, program, replace and verify telematic devices Maintenance Operations ● Perform the work needed to implement preventive maintenance for the vehicles serviced by this maintenance facility● Perform the work needed to complete unscheduled repairs to the vehicles serviced by this maintenance facility● Perform road calls and on-the-road repairs as assigned● Record time spent, parts used and repairs and/or maintenance conducted on the work tablet and/or authorized form Safety & Compliance● Maintain a safe, clean, productive, and efficient work area including ensuring the work area is in compliance with all relevant Federal, State/Provincial, local guidelines and requirements, and company Housekeeping standards and safety regulations● Perform work within scope of duties and in accordance with DOT compliance requirements● Work assigned shift and overtime as needed QualificationsBasic Qualifications: ● 5 years of fleet experience in Diesel, Heavy/Med duty fleets● Minimum of five years Auto/Truck or Bus mechanical repair experience● Experience with compliance with the local applicable DOT compliance of Med/Heavy Trucks● Computer proficiency for fleet management systems and documentation● Possess the recommended minimum hand tools for a Medium and Heavy Duty and Diesel Technician● Strong experience with computerized diagnostics● Ability to use good judgment and decision-making skills● Background in planning and scheduling maintenance repairs (Daily, Weekly, Monthly)● Willingness to work flexible schedules Preferred Qualifications: ● Valid CDL License (Must be able to obtain within the first 90 days of employment)● ASE Certification in brakes, suspension, engine, electrical, A/C or a Master School Bus and/or a Master Truck TechnicianThe targeted base salary range for this role is listed in the compensation section below. Actual salary may be above or below this range based on factors such as location, skills, and relevant experience. In addition, this position may include additional compensation in the form of bonus, equity, or commissions. If you are a full-time salaried or hourly worker, we offer the following benefits: Medical, Dental, Vision, 401(k), Holidays, Wellness, Vacation, and more. The targeted pay range for this role in US: $33.65- 38.46/hr Zūm Services, Inc. and all its subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Shop Technician Location: Fresno, CA Job Type: Full-Time Salary Range: $35-$45 hourly depending on experience About Sonsray: Sonsray moves mountains for the construction, transportation, and agriculture industries. We are the West Coast's largest Thermo King & CASE dealership, offering sales, parts, service, rental, and leasing. We are committed to fostering a supportive and dynamic work environment. Why work here? At Sonsray, we value all employees, their contributions, and most importantly, their ideas! We know that the key to moving mountains is teamwork. This is what we offer our team members: • Medical coverage (PPO + HSA options), • Dental, Vision, and Life insurance provided at no cost, • 401K with competitive employer contributions, • 80 hours of annual vacation, increasing with years of service, • Uniforms provided annually, • Annual boot voucher of $125.00, • One full paid day off annually for community volunteer work, • Birthday meal provided by Sonsray, • Privately owned and operated, with decisions made based on core values rather than corporate directives, • Annual Holiday Party, including covered airfare and hotel for employees and a guest, • Emphasis on company growth and employee development Responsibilities: * Diagnose and troubleshoot issues involving: • Engines, • Transmissions, • Hydraulic systems, • Electrical systems, • Structural components, including welding, • Complete accurate documentation and service reports using basic computer systems, • Maintain a clean and safe work environment by following proper safety protocols, • Apply safe and proper use of hand, pneumatic, and electric tools, • 5 years experience hands-on experience servicing and repairing agricultural or heavy equipment (agriculture or heavy machinery preferred)., • Ability to work independently with minimal supervision, • Solid diagnostic and troubleshooting skills across mechanical, hydraulic, and electrical systems, • Welding and structural repair experience is highly preferred, • Must be at least 21 years of age with a valid driver’s license and acceptable driving record., • Ability to comply with all Auto and Equipment Safety rules and operate vehicles within prescribed limits and weather conditions.

Job Description Vie-Del is a major producer of concentrates from grapes and other fruits, brandy, spirits, and wines. We are currently seeking talented candidates to join the Vie-Del Family. We offer a competitive salary and excellent benefits package in an employee-friendly and rewarding environment. SUMMARY: The Lab Technician under close supervision from the Lab Manager and Quality Control Supervisor will perform laboratory tests for such purposes as quality control, process control, and/or product development. Conducts and analyzes tests as prescribed by company procedures and, when applicable, ensures compliance with government regulations. This is an entry-level position. DUTIES: • Learn the theory and application of analytical test methods, standard operating procedures, and equipment operation through an ongoing training program., • Calibrate, standardize, and operate various laboratory instruments required for routine lab analyses utilizing a variety of techniques and equipment, such as pipetting and titrating, colorimetric methods, pH meter, balance scales, spectrophotometer, gas chromatograph, evaporator, distillation apparatus, refractometer, turbidimeter, flame photometer, HPLC, hydrometers, and other equipment., • Test samples of raw material, in-process, and manufactured products to verify conformity to specifications., • Record test results on standardized forms and write test reports describing procedures used. Prepare graphs and charts as necessary., • Perform various microbiological tests, • Perform plant sanitation and environmental monitoring tests, • Clean and sterilize laboratory equipment, • Prepare chemical solutions according to standard formulas and Lab Safety procedures, • Conform to Good Laboratory Practices, Lab Sanitation, and Lab Safety procedures, • Cooperate with Lab Manager and QC Lab Supervisor to solve problemsQUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Individuals must be able to work all shifts and/or weekends as needed. Computer skills are required in Microsoft Word and Microsoft Excel. The position is full-time, requiring excellent attendance and punctuality Education and/or Experience Bachelor’s degree in Biology, Enology, Food Science, Chemistry, Microbiology or related field preferred; or a minimum of two years experience in wine or food lab and two (2) years related college work. Language Skills Ability to read, analyze, and interpret periodicals, professional journals, technical procedures, and government regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from laboratory staff, groups of managers, clients, and customers. Mathematical Skills Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, and percentages. Ability to apply concepts of basic algebra and geometry. Reasoning Ability Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to define problems, collect data, establish facts, and draw valid conclusions. Other Requirements Intermediate or higher level of experience with word processing and spreadsheet applications. Intermediate or higher level of experience with Internet search engines. Typing speed of 40 words per minute or more and ten-key by touch. A valid California Driver’s License is required. Powered by JazzHR EBr1Uz0yrs

Job Description Overview Join our all-PRN team! Designed for flexibility, and full of opportunity, this could be the next perfect fit for you. Opportunities for you! • Top notch compensation with 18% added to base!, • Flexible self-scheduling — pick up shifts when and where you want, • Consecutively recognized as a top employer by Forbes, and in 2025 by Newsweek, • Direct impact on quality patient care in a system with 1,200+ licensed beds, • Work knowing you have the support and resources of an experienced leadership team, • Free parking and electric charging, • Great food options with on-demand ordering We know that our ability to provide the highest level of care is through taking care of our incredible teams. Learn more on our Benefits page. Responsibilities You love what you do, now love where you do it. The Monitor Technician is responsible for monitoring heart rhythm patterns to detect, record, and report normal and abnormal heart rhythm patterns, normal and abnormal ECG interval measurement, and proper and improper pacemaker or implantable defibrillator function utilizing equipment. This position is also responsible for admitting and discharging patients, answering telephone calls, and processing physician orders. This position is part of the internal resource pool and is designated as a per diem role, providing staffing support across designated departments based on organizational needs. Qualifications Education• High School Diploma, High School Equivalency (HSE) or Completion of a CHS Approved Individualized Education Plan (IEP) Certificate required• Successful completion of a Basic Arrhythmia Recognition or ECG/EKG interpretation course requiredExperience• 1 year of experience required• Knowledge of medical terminology and computer experience preferredLicenses and Certifications• BLS - Current Basic Life Support (BLS) for Healthcare Providers by American Heart Association (AHA) requiredCHS HealthStream Course• ECG - ECG Rhythm Exam Non-Clinical (Administered by CHS) required within 30 days of hire or transfer into position

The Maintenance Technician is responsible for performing repairs and maintenance for work.

Aerotek - - Responsibilities: Install, change, and fix electrical outlets and troubleshoot electrical issues within the building; Perform basic plumbing tasks and diagnose plumbing issues; Carry out minor carpentry work as needed in the facility; Service HVAC systems at various client locations; Ma

InterSolutions - - Responsibilities: Handle service requests and maintenance tasks to ensure community functionality; Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents during turnover; Perform electrical, plumbing, appliance, and carpen

Responsibilities: Perform preventive maintenance (PMs) and repairs; Utilize diagnostics and maintenance software; Diagnose vehicle failures and disassemble/repair parts; Maintain vehicle documentation and pre-trip checklists; Respond to service calls.

Altium Packaging - 2875 South Elm Avenue - Responsibilities: Perform repairs and preventive maintenance on production machinery; Inspect and replace pneumatic and hydraulic hoses; Troubleshoot and repair blow mold, baggers and support equipment; Weld, fabricate, and repair machines; Operate blow mol

Government Jobs - Full-Time - $24.Hourly If you are interested in working with an Agency that effectively delivers housing, and other services in the community and have experience in repair and maintenance of facilities and multifamily homes, then you should submit your application for this opportun

Delivery Driver (Part Time) - Final Mile - Clovis, CA.Overall Job Summary: The Delivery Specialist is responsible for delivering purchased merchandise to customers within the assigned market while meeting delivery and quality standards.The Delivery Specialist will deliver Legendary Customer Experien