Trabajos electrical engineer en Plainfield, New JerseyCrear alertas

About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit _. Job Summary :The Sr. Reliability Engineer will be responsible for supporting overall system reliability by developing the electronic‑based failure bathtub curve, modeling long‑term reliability, and defining accelerated test plans for battery management systems (BMS). The engineer will work closely with hardware, systems, and software teams to analyze failure modes, validate reliability assumptions, and drive corrective actions . Job Responsibilitie • s:Lead reliability objectives for battery storage hardware, including PCBAs and electromechanical assembli, • esDevelop long-term reliability test plans for all BMS circuit boards, including thermal cycling, damp heat, and other environmental stresses aligned with warranty requirement, • s.Estimate annual failure DPPM (AFR%) using SR‑332 standards and reliability modeling tool, • s.Assess expected field use conditions including power‑on hours (POH), temperature exposure, and duty cyc, • leIdentify components with potential wear‑out mechanisms and develop degradation or failure‑rate models as neede, • d.Determine acceleration factors and test durations based on agreed upon field use assumption, • s.Detect wear out failure modes during testing, coordinate root cause investigations, and recommend corrective or preventive action, • s.Create HALT (Accelerated Life Test) plans to uncover early‑life and latent failure mechanisms and assess relevance to field condition, • s.Develop HASS (Highly Accelerated Stress Screening) plans to evaluate ongoing production product qualit, • y.Participate in recurring reliability reviews with engineering teams to track progress, risks, and timeline, • s.Provide guidance on system level and software related reliability considerations, including interactions between hardware, firmware, and operational condition, • s.Support broader reliability initiatives within the battery storage platform as neede d.Education/Experienc • e:Bachelor’s degree in electrical engineering requir, • ed8 years of experience in systems engineering, reliability engineering, or relat edSkills/Abilitie • s:Experience with electronic component reliability, SR 332 modeling, and AFR/DPPM estimatio, • n.Proficiency with reliability modeling tools such as Relyence, RelCalc, or simila, • r.Strong understanding of environmental stress testing (thermal cycling, humidity, HALT, etc., • ).Familiarity with degradation mechanisms in electronic components and PCB assemblie, • s.Experience conducting root cause analysis and developing corrective actions for wear out failure s.

Your new Company A well-established MEP consulting firm in Central New Jersey is looking to hire a Senior Electrical Design Engineer to support continued growth and a strong pipeline of repeat client work. This is a hands-on, senior-level role suited to an engineer who enjoys taking ownership of projects, working closely with architects and internal teams, and being involved from concept through construction. The position is primarily office-based to support collaboration, mentoring, and site activity. Your new role • Designing electrical power, lighting, and fire alarm systems for a range of building types Working on projects across: • Commercial, • Institutional, • Industrial, • Multifamily residential, • Producing construction documents and technical drawings using AutoCAD, • Applying relevant electrical, life safety, and building codes, • Coordinating with architects, clients, and other engineering disciplines, • Carrying out site visits and field surveys as required, • Supporting and mentoring junior engineers (with longer-term opportunities to step into a lead role) What you’ll need to succeed • Experience in electrical building systems design, • Strong background in electrical MEP and fire alarm design, • Ability to work independently and manage projects with minimal supervision, • Solid working knowledge of codes and standards, • Proficiency in AutoCAD and comfort producing your own drawings What you’ll get in return • A senior, hands-on role with real technical ownership, • Exposure to a diverse mix of technically interesting projects, • A collaborative, low‑politics working environment, • Opportunity to grow with the business and influence the electrical function, • Competitive salary based on experience and capability (flexibility for the right candidate) What you need to do now If you’re interested in this Senior Electrical Design Engineer role and would like to learn more, apply now or contact us for a confidential discussion.

Cover Letter Required Abraxas Energy Consulting, LLC, a subsidiary of Hillmann Consulting, LLC, is a nationwide energy auditing and consulting firm that provides energy assessments, training, and software tools to assist facilities in reducing energy and water waste. Together, Abraxas and Hillmann can provide customized Energy Analysis, Energy Accounting, Environmental Health and Safety, Remediation Support, Real Estate Due Diligence, Geotechnical, and Laboratory Analysis services. Abraxas and Hillmann deliver consulting with an uncompromising commitment to customer service, safety, and increasing value and quality to our clients. Abraxas has an immediate opening for an experienced Energy Engineer for nationwide coverage out of the Union, NJ area to lead facility energy and water assessments and provide other energy consulting services. Typical assignments will include leading on-site energy and water assessments, retro-commissioning activities, field measurement and verification, and field diagnostic testing/deployment. The Energy Engineer is expected to be capable of leading an energy audit following ASHRAE’s Level 2 energy audit methodology for most facilities independently from start to finish. However, the Energy Engineer is also expected to work in small teams when necessary on larger projects and to facilitate mentorship of more junior team members. This position requires a high level of individual initiative, responsibility, work ethic and time management skills to meet shifting and overlapping project deadlines. The work will involve regular interaction with clients in person, on the phone, and via email. The Energy Engineer will work with team members to request information, solicit feedback, and clearly define project responsibilities is crucial. The Energy Engineer will also need to communicate with their peers and Project Managers regarding their schedule, roadblocks to their work, and additional support that may be required. Responsibilities: Field Tasks The tasks will range in complexity from one day walk thru site visits to investment grade energy audits to identify energy reduction opportunities in lighting, HVAC, building envelope, water, renewables, controls, and other energy and water using systems. • Conduct/lead detailed energy surveys of facilities ranging from simple office or multifamily properties to complex high-rise offices, manufacturing, and/or other energy intensive buildings., • Lead building retro-commissioning activities including functional performance testing and monitoring of equipment., • Lead measurement and verification field work including visual verification, sampling strategies, and complex field measurements., • Conduct energy audits., • Adapt to varying field data collection techniques including handwritten notes, tablet-based tools, photo logging, review of as-built drawings, review of building control systems, use of measurement devices and hand tools, etc., • Deploy field diagnostic equipment such as wireless monitoring systems, data loggers, flow meters, power loggers, multimeters, temperature devices, air flow meters, manometers, lighting meters, current transducers, appropriate personal protective equipment (PPE), hand tools, etc. Analysis • Keep current with new energy efficiency technologies and strategies., • Analyze and evaluate results from measurements including interval energy data, lighting readings, etc., • Interpret, and tabulate information from facility mechanical and electrical drawings such as lighting fixture counts, mechanical equipment ratings/locations, piping diagrams, etc., • Interpret control strategies and sequences. Analyze and propose optimum strategies for all types of energy using equipment., • Complete detailed energy allocations that predict with reasonable accuracy the breakdown of major energy users in a building., • Evaluate operations and maintenance savings and estimate the cost to implement energy conservation measures., • Exercise experience and research to scope energy improvements to building systems in detail and quantify accurate installed cost estimates., • Communicate with and obtain vendor quotes for proposed improvements as needed., • Complete life-cycle cost analysis for energy improvement projects., • Perform energy and economic analysis of energy efficiency measures using energy modeling software, spreadsheets and other tools. Reporting and Presentation • Document and communicate the results of energy audits through written reports, PowerPoint presentations, meetings, and conference calls., • Meet with clients and team members to discuss energy efficiency measures., • Keep current with new energy efficiency technologies and strategies., • Convey technical concepts and recommendations in a clear, concise, and meaningful way. Other • Review the work of more junior Auditors and Energy Analyst assigned to your own projects and ensure all tasks are completed accurately., • Mentor and train supporting Energy Analyst and Auditor in how best to support the engineering project., • Conduct peer review of other engineers’ work., • Conduct scoping assessments to evaluate client facilities for potential work with Abraxas, • Support business development through technical input on proposals, quotes, capabilities, etc., • Support operations with the optimization of processes and development and improvement of tools, templates, resources, and training content. This job has no supervisory responsibilities. Minimum Qualifications (Education, Skills, and Experience): Meeting these qualifications will make you eligible for a starting salary at the low end of the posted range: • Preferred: Bachelor of Science Degree in Mechanical Engineering, Electrical Engineering, or other four-year STEM degree AND 3+ years of experience in the analysis of energy using systems in existing buildings., • Minimum: 2-year technical, math, or science degree AND 5-10+ years pf experience in the analysis of energy using systems in existing buildings., • Mastery of the English language – written and spoken., • Advanced competency with Microsoft Excel and Microsoft Word and ability to improve., • Experience surveying and analyzing the operation of complex mechanical and electrical systems in buildings and their associated control algorithms., • Experience writing detailed energy audit and engineering reports including conveying as-found conditions and recommended capital improvements., • Experience with the application of advanced mathematical concepts to energy use analysis in buildings., • Experience presenting the results of an energy audit or re-commissioning project to small groups of stakeholders. Additional Valuable Qualifications: Meeting these qualifications may make you eligible for a starting salary at the high end of the posted range: • 7+ Years of related experience, • NABCEP Certification: PV Installation Professional (PVIP), PV Design Specialist (PVDS), or PV Installer Specialist (PVIS), • Professional Engineer license in any state., • A certification in any of the following: Certified Energy Manager, Certified Lighting Efficiency Professional, LEED Accreditation, Certified Energy Auditor, Building Performance Institute, HERS Rater., • Experience with self-performing advanced field measurements in existing buildings including: spot and long-term power measurements, 3 phase power measurements, airflow duct traverses, ultrasonic flow metering, combustion gas analysis, airflow hood testing, thermal imaging, non-destructive envelope measurements, etc., • Experience in new construction and/or existing building commissioning., • Experience developing energy simulation models with DOE-2, eQUEST, TRANE TRACE 700, TRACE 3D or similar programs., • Experience creating measurement & verification plans for energy projects. TRAVEL - While many project assignments are local or regional, the Energy Auditor should expect to be gone from home 5-7 nights per month on average. Abraxas reimburses all travel expenses according to the company’s Travel and Expense Policy. Benefits: Abraxas Energy Consulting, LLC and Hillmann Consulting, LLC are committed to the professional development and well-being of our employees. The following benefits are offered to employees: · Competitive salary · Paid vacation and sick leave · Medical, dental, and vision insurance · Employer-401(k) Plan · Tuition assistance · Volunteer time off Abraxas Energy Consulting, LLC is an equal opportunity employer.

Electrical Hardware Design Engineer (High-Speed Imaging Systems) Seeking an experienced Electrical Hardware Design Engineer to support development of advanced scientific imaging and detection systems. This role focuses on the design of high-speed mixed-signal electronics and sensor interface hardware used in precision instrumentation environments. The position bridges low-noise analog design with FPGA-based digital control and high-speed data acquisition . This is not a consumer electronics role. The work centers on scientific-grade instrumentation hardware involving sensitive imaging sensors, precision signal chains, and high-performance data system s. Requiremen • ts:Design and develop mixed-signal circuit boards for high-speed imaging and light detection syst, • emsSupport full product lifecycle including definition, design, qualification, and production supp, • ortDesign low-noise, wide-bandwidth analog front-end circuits for sensitive sensor signal condition, • ingDevelop FPGA-based high-speed digital circuitry for sensor command, control, and data handl, • ingSupport implementation of high-speed sensor interfaces and data acquisition pathw, • aysGuide multi-layer PCB design including stack-up definition, component placement, and routing strat, • egyParticipate in board bring-up, validation, and troubleshoot, • ingContribute to board-level test fixture design and production support activit ies Technical Ski • lls:Strong background in both analog and digital electrical engineering princi, • plesExperience designing low-noise, high-bandwidth mixed-signal circ, • uitsHands-on experience with data acquisition systems and high-speed digital interf, • acesExperience with FPGA-based hardware designs and high-speed signal p, • athsKnowledge of system-level power distribution and power management techni, • quesAbility to guide complex multi-layer PCB designs for signal integrity and noise con, • trolProficiency using lab equipment such as oscilloscopes, logic analyzers, spectrum analyzers, and power supp, • liesStrong troubleshooting and hardware debug sk ills Preferred Experi • ence:Background working with scientific instrumentation, analytical devices, or precision imaging sy, • stemsExperience supporting hardware from prototype through produ, • ctionFamiliarity with sensor-based imaging or detection sy, • stemsPrior experience contributing technical direction within engineering teams Type: Fu lltimeLocation: Piscataway, NJ (O nsite)Salary Range: $120,000 - $1 50,000

POSITION: Facilities Engineer DEPARTMENT: Maintenance REPORTS TO: Operations Manager POSITION SUMMARY: The Facilities Engineer is responsible to fulfill the mechanical needs of both the equipment and the physical structure. This position will be responsible for the installation, maintenance, and troubleshooting of all facility equipment and machinery. In addition, he/she will be responsible for some light carpentry, painting, basic plumbing, and other duties required in the maintenance of the building. The Facilities Engineer will have direct responsibility for performing some electrical work throughout the plant and contracting, scheduling, and overseeing the work of outside labor when necessary. This individual will make recommendations regarding purchasing supplies and equipment needed to run the Maintenance Department as well as for scheduling basic equipment maintenance. He/She must consistently and efficiently perform and follow procedures in compliance to company, customer, and ISO standards. PRINCIPAL JOB RESPONSIBILITIES: • Diagnose problems and make repairs on equipment in order to minimize machine ‘downtime’ and, if necessary, schedule outside labor; i.e. factory repair., • Schedule and perform preventive and predictive maintenance on equipment., • Install and/or assist with installation of factory equipment., • Operate all shop equipment including all power equipment., • Perform some sheet metal work., • Perform electrical, plumbing, and other duties required for efficient operation of the physical plant including some HVAC programming., • Complete daily maintenance and repair logs., • Maintain and secure work tools., • Clean and maintain all work areas., • Contributes to team effort by accomplishing related results as needed., • Perform additional duties/projects as assigned by lead, management and/or Supervisor. SAFETY RESPONSIBILITIES: Must learn and comply with all Cultech, Inc. safety rules; reference to employee handbook. PRINCIPAL SKILLS AND FUNCTIONS (5+): • Ability to work independently and as part of a team with a high level of initiative and flexibility., • Capable of understanding technical customer requirements., • Ability to work and multi-task under pressure in a fast-paced environment to meet customer deadlines., • Constantly produces high quality work and maintain established production standards. JOB REQUIREMENTS: • High school education required; College degree with an emphasis on engineering preferred., • Licensed in electrical preferred; proficiency required., • Proficient in machine repair., • Proficient in use of welding equipment., • Knowledge of printing specific equipment, • Skilled in plumbing, carpentry, HVAC, electrical, and piping skills., • Familiarity with OSHA standards regarding potential job hazards and protocols., • Must be able to stand for long periods of time and work in potentially uncomfortable positions., • Ability to work effectively in a team environment., • Must be attentive to detail., • Must be able to comprehend and follow all job procedures and safety protocols. ADDITIONAL REQUIREMENTS: Employees must fulfill the performance standards of this position and comply with policies, rules and procedures of Cultech, including those set out in the Employee Handbook or otherwise communicated (verbally or in writing) to employees.As necessary, employees are expected to manage waste and chemical products properly. This job description is intended to describe the general nature and work responsibilities of the position and is not intended, and should not be construed, to be an all-inclusive list of responsibilities, skills, efforts or working conditions associated with this position. This job description and the duties of this position are subject to change, modification and addition as deemed necessary by Cultech management. Employees are required to comply with supervisory instructions and perform other job duties, responsibilities and assignments as requested by supervisors or management. The job responsibilities of this position may include cross training in other functions or positions to ensure satisfactory operation of the department or work area. This job description does not constitute an employment contract between Cultech and any employee.

Seeking a highly motivated and collaborative Electrical Designer or Engineer to join our growing team. This position is ideal for someone passionate about thoughtful design, team collaboration, and high-performance building systems. The person in this role should have an Electrical Engineering or Architectural Engineering degree, or 3–7+ years of experience designing electrical systems for commercial, mixed-use, or institutional buildings. This person will be responsible for the design and documentation of electrical systems, including power distribution, lighting, fire alarm, and low voltage systems, and for coordinating with other disciplines including mechanical, plumbing, architectural, and structural. Position Qualifications: • Electrical or Architectural Engineering degree (or equivalent experience), • 3–7+ years of electrical design experience, • EIT or PE license preferred not required, • Excellent knowledge and proficiency with Revit and BIM 360, • Experience with multi-story, multi-family electrical design preferred, • Strong knowledge of CEC, NEC, and other applicable codes, • Familiarity with restaurant electrical systems is a plus, • Strong understanding of the plan review and permitting process, • Excellent written and verbal communication skills, • A positive, energetic attitude, • A desire for personal and professional growth, • A team-first mindset with a collaborative spirit, • Strong attention to detail, • Empathy and respect for coworkers and project partners

Senior Traffic Engineer US-NJ-Edison Job ID: 2026-3276 of Openings: 1 Category: Civil/Structural Engineering LiRo-Hill Overview We are seeking a Senior Traffic Engineer to play a key role in expanding and strengthening our transportation practice in our Edison, NJ office. This position offers the opportunity to help build and shape our in-house traffic capabilities in support of bridge, roadway, and infrastructure projects throughout NJ and NY, particularly for NJDOT and NYSDOT clients. In addition this role is intended for a well-rounded infrastructure professional who is comfortable operating beyond traditional traffic engineering boundaries when project or practice needs require. This is not solely a production role. We are looking for an experienced traffic professional who is interested in helping grow a practice — someone who can lead technical efforts, contribute to pursuit strategy, mentor staff, and collaborate across disciplines and office locations to deliver integrated and constructible transportation solutions. The successful candidate will work closely with structural, civil, and infrastructure teams to integrate traffic engineering into projects from planning and concept development through final design and construction. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities • Perform and review traffic engineering analyses, including capacity analysis, signal analysis, intersection evaluation, and corridor studies (e.g., Synchro, HCS), • Lead and oversee the preparation of Maintenance & Protection of Traffic (MPT) and staging plans for bridge and roadway projects, • Develop traffic control, signing, and pavement marking plans in accordance with NJDOT, NJTA, NYSDOT, NYCDOT, and MUTCD standards, • Support and lead traffic impact studies and operational improvement projects, • Coordinate closely with structural and civil engineers to develop practical, cost-effective, and constructible staging solutions, • Serve as task lead and technical authority on traffic-related assignments, • Participate in site visits and constructability reviews to evaluate existing traffic conditions, • Provide technical support during construction administration, • Assist with agency coordination and client engagement related to traffic and work zone impacts, • Contribute to proposals, qualifications packages, and business development efforts to strengthen the firm’s transportation resume Qualifications • Bachelor of Science in Civil Engineering or Bachelor of Science in Electrical Engineering (Transportation focus preferred), • 8–25 years of traffic engineering experience, including DOT project experience, • NJ PE required; NY PE strongly preferred or ability to obtain, • PTOE certification preferred, • Demonstrated experience with NJDOT, NJTA, NYSDOT, or NYCDOT standards and procedures, • Strong background in MPT/staging and work zone traffic control, • Experience with traffic analysis software (Synchro, HCS, VISSIM or similar), • Signal design and timing experience preferred, • Proficiency in AutoCAD preferred; MicroStation experience is a plus, • Ability to manage multiple assignments, mentor junior staff and work as part of team., • Strong written and verbal communication skills Growth Opportunity This position is part of a strategic initiative to expand our multidisciplinary transportation capabilities. The selected candidate will have the opportunity to help define processes, grow internal talent, and build a scalable traffic engineering group within a collaborative environment. We are seeking a professional who is motivated to take ownership and contribute to the long-term development of the practice. Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $140,000; Maximum: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role., • Please visit our website for all of our career opportunities at _ LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 140000-170000 Yearly Salary PI7fe997f26570-37820-39771742

Job Description Maintenance Assistant (Hotel) Location:Hampton Inn by Hilton - 205 New World Way, South Plainfield, NJ 0708 The Hampton Inn - South Plainfield is seeking a Maintenance Assistant to join their team! This is a Full Time position - shift 8am to 4pm. Flexible availability is needed. The Maintenance Assistant will be responsible for the upkeep of the hotel property, assisting the Chief Engineer. • Major duties include basic repair work, painting, wall covering, plumbing, electrical work, pool operations, preventative maintenance, and indoor and outdoor grounds upkeep., • Maintains all fixtures and equipment according to the preventative maintenance schedule and records such maintenance in log books as required by Buffalo Lodging and hotel brand., • Maintains and services pool and spa areas including testing and recording as stated by the state and local regulations., • Cleans internal areas of buildings including sweeping, mopping and removing garbage from building. Maintains cleanliness of public and storage areas as well as the parking lot. Typical shifts would be: Any day of the week, including weekends ; What You Bring: At least 2 years of mechanic experience in a hotel or a related field. HVAC, electrical, plumbing, boiler operations and general maintenance skills required. Must be able to bend, kneel, lift, push, carry and pull up to 75 lbs. Requires reaching overhead, climbing, crouching, and twisting. Valid drivers license required. What We Offer You: At Buffalo Lodging, we are committed to keeping our most important assets – our employees – healthy, happy and productive. To achieve this, we offer a variety of benefits including the following: • Paid Weekly (Every Friday!), • Medical, Dental & Vision Insurance, • Competitive 401 (k) Retirement Savings Plan with Generous Employer Match, • Paid Vacation and Sick Time, • Paid Holidays, • Tuition Reimbursement, • Flexible Spending Account, • Company Paid Life Insurance, • Company Paid Short-Term Disability Insurance, • Long-Term Disability Insurance, • Employee Assistance Program, • Hotel Discounts – for You, Your Friends and Family, • Monthly Employee Appreciation Activities & Events, • Learning and Development Opportunities, • Employee Referral Program, • Typical Shifts -Schedule is based on business needs; Schedule is normally Tuesday - Saturday hours are typically from 9am-5pm. Weekend/Holiday availability is a required. Buffalo Lodging Associates provides equal employment opportunities to all associates and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. AECOM has a position available for a High Voltage Transmission Electrical Engineer with a specialization in HVDC electrical power systems. The focus of your experience must be in the power industry and be associated with electrical engineering with respect to the design of HVDC terrestrial / submarine cable systems and converter stations. The responsibilities of this role include, but may not be limited to, the following: • Engineering support for HVDC terrestrial and submarine cable systems and converter stations, • Supporting HVDC cable routing and converter station feasibility studies, • Providing technical support input during the project permitting phase, • Preparation of conceptual level engineering documents, • Working with Project Engineer and Project Manager on developing design schedules and budgets for electrical engineering work activities, • Supporting clients with utility interface and technical coordination, • Power system studies (load flow, short circuit, protective coordination, arc flash analysis), • PSCAD model development and analysis, • Preparation of one line and three-line diagrams, AC/DC schematics, BOMs, wire schedule, interconnection diagrams, • Field experience including witnessing testing of HVDC equipment and systems, • Developing construction and equipment specifications, • Supporting projects during construction, start-up, and commissioning as needed, • Grounding Analysis and Design, • Reviewing engineering work performed by peers, • Attending client meetings, • Assist in the promotion of AECOM's capabilities while maintaining our existing client base and, • Provides specialized technical input to studies and design for staff's specific area of expertise, technical expertise for studies and design efforts, and presents complex technical solutions to clients, • Perform quality control reviews of work developed by others, • Participate in development of technical proposals, • Provides estimates for the engineering budget and schedule, • For this role, AECOM offers the freedom and flexibility to work remotely and/or be located at a variety of Energy offices in multiple locations across the United States through our Freedom to Grow program DCS—Energy AECOM’s Energy practice provides a wide range of services from consulting and engineering design to energy engineering, energy procurement and construction (EPC) for power, energy efficiency, oil and gas, nuclear, and renewable energy clients. Our understanding of the big picture – and the interconnection between generation, distribution, storage, and the demand side of the meter – allows us to deliver holistic solutions that improve and modernize generation energy infrastructure. We connect knowledge and experience across our global framework to bring together a unique combination of engineers, planners, scientists, advisors, and project managers who advance energy solution and infrastructure to meet our varied Clients needs. Minimum Requirements: • Bachelors degree in Electrical Engineering and 6 years of relevant HVAC experience and HVDC experience or demonstrated equivalency of experience and/or education., • Experience must include electrical power engineering coupled with some leadership experience. Preferred Qualifications: • Masters degree in Electrical Engineering is preferred, • Professional Engineer (P.E.) license in Electrical Engineering, • 10+ years of relevant experience or demonstrated equivalency of experience and/or education, • Experience working with FACTS, • Power systems analysis software experience (ASPEN OneLiner, ETAP, SKM Power Tools, AcSELerator, EnerVista, etc.), • Familiarity with industry codes and standards (NEC, NESC, IEEE, etc.), • Able to lead engineering tasks with strong communication skills (written and verbal), • Experience on full EPC, Design/Build projects from start to finish, • Plant Startup and Commissioning Field Experience, • Owner’s Engineering experience, • Experience working with remote team, • Relocation assistance is not available for this position, • Sponsorship for US Employment Authorization is available for this position, • Offered compensation will be based on location and individual qualifications. The expected range is $130,000.00 to $190,000.00 USD. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community—where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

Job Description Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Summary: Attalon is seeking an embedded software engineer to contribute to the development of advanced laser systems for defense applications. Primary Duties & Responsibilities: Software Architecture and Design: Works as a member of a cross-disciplinary team of systems engineers, optical engineers, electrical engineers, and FPGA engineers to conceptualize a system solution that meets customer requirements. Responsible for architecting, designing, and documenting software for assigned projects. Creates design documentation including Software Requirements Documents, block diagrams, Software Design Documents, and Interface Control Documents. May serve as the lead software engineer on assigned projects. Software Development and Test: Develops software (primarily embedded) to meet the requirements of the system under development. Writes software test plans and tests software at various levels of integration (unit tests, tests on target architecture, test with target electronics). Writes software scripts and tools to support software development and system test. System Integration and Test Support: Develops Software Test Plans and supports integration and test activities from initial board-level bring up through final system test. New Business Development: Participates in writing proposals and providing cost and schedule estimates in support of new business pursuits. Technical Expertise: Subject matter expert with extensive knowledge and expertise in embedded systems and software development. Works independently with general direction to achieve goals and objectives. Exercises judgment in selecting methods, techniques and evaluation criteria for obtaining results. Makes accurate detailed work plans for complex systems/projects; takes the lead in planning and executing software tasks. Education & Experience: • Typically requires a minimum of 9 years of related experience with a Bachelor’s degree; or 7 years and a Master’s degree; or a PhD with 4 years experience; or equivalent experience. Skills: • Must have significant demonstrated experience in architecting and designing software solutions in embedded systems. Must have deep understanding of tradeoffs involved in hardware/software functional partitioning., • Must have a strong understanding of embedded processor platforms and be familiar with microcontrollers, FPGAs and system-on-chip devices. Experience with AMD/Xilinx platforms is preferred., • Must have significant past experience developing software in C and C++, and a strong background in object-oriented programming. Must have strong debugging and troubleshooting skills. Experience developing in one or more of the following are also highly desirable: C#, Python, LabVIEW., • Must have significant experience developing software for real-time operating systems (RTOS) and/or embedded Linux., • Must have strong understanding of embedded hardware devices, chip-to-chip interfaces, and networking protocols., • Must have demonstrated experience working with cross-disciplinary engineering teams to develop and test highly-functional integrated systems., • Experience working with laser systems is desired but not required. Past experience on high-reliability systems for defense and/or space is desired but not required., • Must be able to obtain/maintain a US Government security clearance if one is required to perform the job responsibilities. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Life at Plume At Plume, we believe that technology isn't about moving faster, it's about making life's moments better. Which is why we've built the world's first, and only, open and hardware-independent service delivery platform for smart homes, small businesses, enterprises, and beyond. Our SaaS platform uses WiFi, advanced AI, and machine learning to create the future of connected spaces—and human experiences—at massive scale. We now deliver services to over 60 million locations globally and have managed over 3 billion devices on our platform. We're expanding rapidly, pioneering a new category, and we achieved our Series F funding in just four years. Our customers include many of the world's largest Internet Service Providers (ISPs) who look to Plume to help them evolve their smart home offerings while gleaning insights from their own data. With a bias for action and a love for being trailblazers, the team at Plume embodies a combination of relentless curiosity and imaginative innovation. We challenge ourselves to think in ways that other companies don't, work to do what should be done (rather than what can), and if we can't do it exceptionally well, we don't do it. It's how we've assembled a team of world-class builders, thinkers, and doers. And it's how we're reinventing what's possible every day. About the Role Plume's Core Engineering team is looking for a Senior Wireless Firmware Engineer with deep expertise in WiFi driver development to lead innovation for large-scale WiFi and broadband solutions. You will work across embedded firmware, wireless drivers, and system-level software to enable high-performance, scalable, and reliable WiFi experiences. This is a high-impact senior role where you will lead complex initiatives in wireless networking, performance optimization, and large-scale deployments, while mentoring other engineers and influencing system architecture. What You'll Do • Lead design and development of WiFi firmware and driver architecture for next-generation wireless platforms, • Own critical components of the WiFi stack and drive technical direction across projects, • Mentor junior engineers and provide technical guidance across firmware and driver domains, • Design, develop, and optimize WiFi firmware and low-level wireless drivers, • Work on IEEE 802.11 stack (WiFi 4/5/6/6E/7), including MAC/PHY layers, • Debug and optimize WiFi drivers with chipset/SoC vendors, • Analyze network behavior and improve performance (throughput, latency, reliability), • Participate in full software lifecycle: design, development, testing, deployment, and support, • Troubleshoot complex system-level issues across firmware, drivers, and networking stacks Required Qualifications • BS/MS/PhD in Computer Science, Electrical Engineering, or related field, • 8+ years of experience in embedded systems, firmware, or driver development, • Proven experience leading complex technical projects end-to-end, • Strong expertise in C/C++, • Deep experience with WiFi driver development at chipset/SoC level, • Strong understanding of Linux kernel and networking stack, • Deep knowledge of IEEE 802.11 MAC and PHY layers, • Experience with OpenWRT, RDK, or OpenSync, • Strong debugging and performance optimization skills Preferred Qualifications • Experience with Broadcom, Qualcomm, or MediaTek WiFi chipsets, • Experience with mesh networking and large-scale deployments, • Knowledge of MU-MIMO, OFDMA, beamforming, WiFi 7, • Python or scripting for automation, • Familiarity with cloud-managed networking systems What You Bring • Strong ownership and leadership mindset, • Ability to solve complex, ambiguous problems, • Experience mentoring engineers, • Excellent communication and collaboration skills, • Passion for building high-performance wireless systems This role is fully remote but requires someone to reside in EST. Unfortunately, we are not offering sponsorship at this time. The total compensation package would include an anticipated compensation range of $140,000.00 - $150,000.00, plus bonus, equity, and benefits. Benefits include: a 401 (k) plan and a company match, basic life insurance, plus unparalleled health, dental, vision, and other benefits and perks. An employee's base salary and its position within the range may depend on several factors, including job-related knowledge, education, skills, experience, and other business-related considerations. Published ranges are provided in good faith at the time of posting. #LI-Remote, #RemoteJobs, #WorkFromHome, #RemoteWork, #WFH About Plume As the creator of the only open, hardware-independent, cloud-controlled experience platform for ISPs and their subscribers, Plume partners with over 400 ISP customers, including some of the world's largest such as Comcast, Charter, Liberty Global, and J:COM. Using OpenSync, the most widely supported open-source, silicon-to-cloud framework for smart spaces, Plume's software-defined network allows ISPs to decouple their service offerings from hardware and rapidly curate and deliver new services over a multi-vendor, open-platform architecture. Plume is an equal opportunity workplace that maintains a continuing policy of nondiscrimination in all employment practices and decisions, ensuring equal employment opportunities for all qualified individuals without regard to race, color, creed, religion, sex, national origin, age, physical or mental disability, sexual orientation, gender identity, marital status, pregnancy, childbirth or related individual conditions, medical conditions (as defined by state law), military or veteran status, or any other characteristic protected by federal, state or local law.

Job Description Position Overview Harris Energy Solutions (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, and Building Retro-Commissioning. We pride ourselves in the work we perform and the services we provide. HES is hiring a Senior Energy Engineer with proven proficiency in Energy Audits & Commissioning work to join our team. Proficiency in Energy Audits & Commissioning work is a mandatory requirement for this role. Candidates without direct Energy Audits & Commissioning work experience will not be considered. Responsibilities • Energy Modeling, • Lead the development and implementation of advanced energy models to support forecasting, scenario analysis, and energy market strategies., • Oversee the modeling team, ensuring accuracy, efficiency, and alignment with company goals., • Collaborate with cross-functional teams to integrate modeling insights into broader company initiatives., • Perform drawing reviews to identify applicable building components, • Compile data for inputs into building energy modeling software, • Execute building modeling, • Perform ASHRAE Level I/II/III Energy Audits, • Analyze utility bills and drawings to identify building energy consumption, • Conduct onsite energy audits of complex building systems, • Identify Energy Conservation Measures, • Perform energy savings and cost analyses for projects, • Generate a technical report for deliverables to clients, • Supervise energy services personnel, which includes work allocation, training, promotion, and enforcement of internal procedures and control, and problem resolution; evaluate performance and make recommendations for personnel actions; motivate employees to achieve peak productivity and performance Requirements • Proficiency in Energy Audits & Commissioning work is required. Candidates without demonstrated experience in Energy Audits & Commissioning work will not be considered., • A valid Professional Engineer (PE) license, • Bachelor's degree in Engineering (Mechanical, Electrical, or Facilities), • 6 years of experience in the Energy Engineering field, • Experience with building energy modeling techniques, • Proficient in Microsoft Office, • Understanding of energy efficiency technologies, HVAC systems, and renewable systems, • Experience with large commercial and multi-family buildings, • Ability to travel throughout the United States Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and without a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time (40 hours per week) Pay: $100,000.00 - $120,000.00 per year Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: 8 hour shift Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description In addition to the responsibilities below, the Programmer will be responsible for the overall success of software design, database creation, and the implementation of procedures and standards used in the programming of controls projects. Responsibilities: As key member of the Albireo team, the Programmer will be responsible for developing unit controller programming and designing interface graphics of building automation systems to include, but not limited to: • Review of project specifications, drawings and project specific documents to establish project intent., • Breakdown scope of work into manageable segments and post to Project Manager for scheduling., • Attend or receive meeting minutes from graphics review meetings with customers., • Posting project programming specific “Request for Information” (RFI) documentation to System Engineer, Project Manager and Engineering Manager., • Follow sequence of operations as required by project documents and engineered sequence of operations, utilizing established standards and libraries., • Assist in startup and commissioning of large systems, such as AHUs, chiller plants, or other utilities systems. Includes installation/configuration of workstations, servers, and network., • Work independently or be part of small collaborative teams., • Work with field technicians to troubleshoot and take corrective action to software issues., • Troubleshoot and correct BMS integration issues. Requirements • Bachelor’s degree in Mechanical Engineering, Electrical Engineering or Computer Science is preferred., • Degree may be offset by 3+ years programming BAS systems., • Experience with Schneider Ecostruxure, Tridium Niagara and/or JCI CCT/Metasys, • Understanding of mechanical HVAC equipment and sequence of operations., • Experience with building automation programming (Function Block, Ladder, or Text-based preferred) or other programming languages (e.g. C, C++, Java, VBA). Tridium system experience, preferred., • Thorough understanding of electrical and network wiring and the programming of BAS components., • Excellent computer skills and strong understanding of MS Office products (Word, Excel); AutoCAD, Visual Basic, Visio., • Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Strong understanding of Modbus and BACnet protocols and integration of these technologies into BAS systems., • Ability to travel to and work on construction sites for commissioning/startup. Salary Range: $80K-$135K/yr. DOE. Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Job Summary: Immediate Opening for a Project Manager/ Construction / Inspector to work in our Warren, New Jersey office location. Job responsibilities would include: • Conducting site evaluations and prepare investigation reports., • Preparing design documents including construction drawings, bid documents and technical specifications related to site/civil projects which may include stormwater/drainage, asphalt or concrete pavement, grading/topography, MSE wall, or other related site features, etc., • Recording field measurements and performing civil engineering calculations related to the noted project types., • Preparing quantity takeoffs and cost estimates., • Representing clients in obtaining and evaluating bids, and awarding construction contracts., • Managing site/civil construction projects:, • Monitoring contractors work for conformance to project construction documents, drawings, and specifications., • Working as our client’s representative on site during work., • Reviewing and approving change orders., • Knowledge of local and state building codes, and ability to apply to work., • Familiarity with local jurisdictional permitting processes and requirements for site/civil project impacts, such as: wetlands, land disturbance, E&S control, pervious/impervious drainage, etc., • Collecting post-project feedback to look for issues and opportunities for improvement., • Work closely with teams to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Perform other related duties as assigned.This position will be balanced between the field on job sites and in the office to help prepare construction documents and reports. Estimated salary range for this position is $85,000 to $120,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license Qualifications Education • Bachelor’s degree in Civil Engineering from an accredited four-year college or university or equivalent experience.Work Experience, • 4 years’ minimum experience required in Engineering, Construction Management and/or a combination of related education and experience., • Experience with site/civil work including: stormwater/drainage, asphalt and concrete pavement, grading/topography, MSE wall, or other related site features, etc. Licenses and Certifications, • Professional Engineer (P.E.) license desired but not required., • OSHA 10 hour certified preferred, otherwise must complete within three months from date of hire, fees covered by Company., • Must have or be able to obtain an unrestricted valid Driver’s License.Skills, • Ability to perform technical civil engineering calculations and design construction drawings /documents with limited oversight., • Excellent written and verbal communication skills., • Excellent computer skills with proficiency in MS Office Suite., • Strong organizational skills and the ability to handle multiple projects at one time., • Ability to interact in a professional manner with clients and colleagues., • AutoCAD proficiency (preferred)., • Ability to work individually or with team members and work collaboratively with other disciplines., • Ability to work in the field and to travel outside local areas as required., • Provide exceptional customer service. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR QClHUuS3ei

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Energy Audit to join our team. The Energy Engineer (Energy Audit) will lead the technical execution of ASHRAE Level I, II, and III energy audits across commercial, institutional, and multi-family buildings. This role focuses on identifying Energy Conservation Measures (ECMs), quantifying savings opportunities, and producing high-quality client deliverables that drive energy efficiency and decarbonization outcomes. Responsibilities • Perform ASHRAE Level I/II/III Energy Audits: Analyze utility bills (electric, gas, steam, water) and architectural, mechanical, electrical, and plumbing drawings to baseline building energy consumption., • Conduct Onsite Audits: Lead and support field investigations of building envelope, HVAC equipment, lighting, domestic hot water, plug loads, and building automation systems using hand tools, light meters, data loggers, and infrared cameras., • Identify Energy Conservation Measures (ECMs): Develop a comprehensive list of viable ECMs tailored to the facility, occupancy, and client goals, including operational, capital, and decarbonization measures (e.g., electrification, heat pumps)., • Perform Energy and Cost Analyses: Calculate energy and demand savings using engineering calculations, bin analysis, spreadsheet tools, and/or simplified energy models; develop installed cost estimates and financial metrics (simple payback, ROI, NPV, IRR)., • Generate Technical Reports: Author client-ready audit reports including executive summaries, ECM write-ups, savings tables, recommendations, and supporting appendices., • Support Utility Incentive and Decarbonization Programs: Prepare documentation supporting utility incentive applications (e.g., NYSERDA, ConEd, NJ Clean Energy) and local carbon legislation compliance (e.g., NYC Local Law 97, BERDO)., • Client and Project Coordination: Coordinate site visit logistics, communicate progress to project managers and clients, and respond to client questions during and after the audit. Requirements • Bachelor's in Engineering (Mechanical, Electrical, Architectural, or Facilities), • 1-3 years of experience performing energy audits or energy engineering work, including at least one internship, co-op, or full-time role, • Working knowledge of HVAC systems, lighting systems, building envelope, controls, and renewable systems, • Familiarity with ASHRAE Procedures for Commercial Building Energy Audits, • Experience using audit tools (data loggers, light meters, IR cameras, combustion analyzers) preferred, • Proficient in Microsoft Office (especially Excel), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CEM, or CEA credential preferred (or willingness to obtain within first year), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionSalary: $70k-100k Position Overview: GRA Design Studio is seeking a skilled and motivated Mechanical Engineer to join our dynamic and engaging team, supporting major national franchise brands such as Wingstop, Playa Bowls, Dave's Hot Chicken, Dunkin', Wonder, Bubbakoo's Burritos, Jersey Mike's Subs, and more. As a key player in our process-driven and creative engineering team, the ideal candidate will have a strong background in mechanical engineering with a focus on HVAC design. The Mechanical Engineer will be responsible for performing HVAC calculations, generating specifications, and sizing plumbing and gas piping systems. Additionally, the role involves creating detailed mechanical layouts, coordinating with other disciplines, and ensuring that designs are executed to the highest standards. This position requires proficiency in AutoCAD and/or Revit and strong project management skills. At GRA Design Studios, we pride ourselves on our end-to-end product line offering, national reach, and commitment to transparency and external communication. We are a disruptive force in the industry, known for our engaging and transparent approach to every project. Job Description: As a Mechanical, Electrical, Plumbing Engineer at GRA Design Studios, you will be responsible for the following: • HVAC Design: Perform load calculations, develop HVAC system layouts, and be responsible for HVAC material to meet project goals. You will also develop and maintain project schedules to ensure timely delivery., • Plumbing and Gas Piping: Size and design plumbing and gas piping systems, ensuring all layouts are accurate and code-compliant. Collaborate with other disciplines to seamlessly integrate these systems into the overall building design., • Layout Creation: Develop detailed mechanical, electrical and plumbing layouts using AutoCAD and/or Revit, ensuring accuracy, clarity, and compliance with standards., • Project Management: Oversee engineering projects from conception through completion, ensuring timelines, budgets, and quality standards are met. Maintain transparent communication with clients and stakeholders, providing regular updates and detailed reporting., • Documentation and Quality Assurance: Prepare detailed engineering reports, specifications, and documentation. Conduct pre and post construction site visits and inspections to verify that installations meet design intent and participate in the commissioning process., • Professional Development: Stay current with industry trends, tools, and technologies. Attend training sessions, workshops, and seminars to maintain professional certifications and licenses, contributing innovative ideas to improve processes. To excel in this role, you should have: • Education: A Bachelors degree in Mechanical or Electrical Engineering or a closely related field from a 4-year accredited college or university., • Experience: Experience: A minimum of 35 years of engineering experience, with proficiency in AutoCAD and/or Revit. Experience performing HVAC calculations, designing HVAC systems, and generating mechanical layouts is essential. Experience sizing plumbing and gas piping systems is also required. Prior fieldwork experience, including site surveys, construction observations, and coordination with contractors, is a plus., • Certification: Engineer-In-Training (EIT) certification is preferred., • Skills: Strong project management, problem-solving abilities, attention to detail, and excellent communication skills, both written and verbal. Benefits: • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K with up to 3% match), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment

Job Description Job Summary: Karbon Engineering has an outstanding opportunity for a talented and motivated Mechanical or Electrical Commissioning Engineer. Candidates must have 2-6 years of experience in operation / testing of: Mechanical Candidate: HVAC systems including water-cooled or air-cooled chiller plants, primary-secondary pumping systems, variable-flow primary-only pumping systems, air handling units, fans and control systems or equivalent mechanical systems. Electrical Candidate: UPS Systems, Generators, Switchgear Controls Must have good communication skills, be computer literate and be able to travel. Experience with Facility Grid a plus. Bachelor’s degree is desirable; equivalent experience will be considered. Responsibilities: Responsibilities include preparation of commissioning plans, pre-functional checklists and test procedures; performing construction inspections, testing equipment and systems, report writing, running meetings and discrepancy resolution. Company DescriptionKarbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities and data centers. The position will be based out of the New Jersey/New York/Pennsylvania area. As an equal opportunity employer, Karbon Engineering invites resumes from all interested parties. Please submit your resumes to careers@karbonengineering.comKarbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities and data centers. The position will be based out of the New Jersey/New York/Pennsylvania area.\n \nAs an equal opportunity employer, Karbon Engineering invites resumes from all interested parties.\nPlease submit your resumes to careers@karbonengineering.com

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Title: Stationary Engineer DAYS Location: Linden NJ (on-site) Visa: USC/GC Only Must have: Blue seal refrigeration toxic 2-c license and black seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires state of New Jersey licenses for operation of hazardous refrigeration and high-pressure steam systems (Blue & Black Seals). Requires valid drivers license

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Promote a culture of technical excellence, accountability, and continuous learning within the commissioning team. Education and Experience Requirements: • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills, • Ability to travel to project sites as needed Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $110,000 – $130,000 per year Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description POSITION: Senior Project Engineer REPORTS TO: Project Engineering Manager OBJECTIVE: Be a valuable member of Verrex and its Engineering Services Department in the overall Implementation of Verrex’s Mission, Vision and Strategy, enabling Verrex to continue to grow and expand its business. COMPENSATION: Salary, exempt (non-hourly), monthly cell phone stipend. BENEFITS: Verrex offers a comprehensive benefits package to support the health, well-being, and financial security of our employees. Benefits include: • Medical, dental, and vision insurance (VSP), • Company-sponsored 401(k) plan with matching contributions, • Company-paid life insurance and AD&D coverage ($50,000), • Long-term disability (LTD) insurance, • Optional supplemental life insurance available for purchase, • Healthcare and Dependent Care Flexible Spending Accounts (FSAs), • Access to AFLAC supplemental insurance products This benefits summary is intended as a general overview and is subject to the terms and conditions of the official plan documents. RESPONSIBILITIES: • Work as the sole Engineer projects in maintaining and executing major project milestones, including:, • Review materials provided by Sales, including proposal, system description, BOM (bill of material), and other documentation, • Prepare sketches for the creation of facility and electrical drawing packages and wiring drawings., • The CAD department primarily works on drawings, but the engineer is required to have a working knowledge of AutoCAD and is expected to create and edit drawings., • Confirm final selection of equipment based on information provided by sales, client, and/or consultant to ensure expected system functionality, • Generate the job control for Purchasing based on the confirmed and agreed upon BOM, • Determination of bulk cable and connectors, and creation of cable pull schedule, • Creation of audio DSP files (Biamp, Q-SYS, and others), • Creation of Theory of Operation document to define specific system functionality, • Coordinate system functionality with the Programming team, • Shop QA review of systems, • Onsite system testing and commissioning, • Review markups of drawings and work with CAD to create as-built drawing sets, • Attend kick-off meetings and site coordination meetings both online and onsite, • Adhere to project schedules created by Project Managers, • Work closely with and provide support to other members of the internal project team (sales, other engineers, project managers, fabricators, QA, field technicians, programmers, and purchasing), • Coordination with architects, general contractors, and electrical contractors to preemptively avoid issues, ensuring site infrastructure and furniture will accommodate AV systems General Responsibilities: • Be a technical resource for other departments as required, • Be a mentor for Project Engineers, • Help drive the evolution of processes within the Engineering Department, • Be an engineering representative in reviewing Verrex processes with other departments, • Leverage field commissioning as a training opportunity for others internal to the company, • Be a liaison to the Design Engineers, providing feedback both positive and negative to help improve the Sales design process, • Conduct equipment research and testing on new and existing technology, • Proactively seek and review new industry products, providing written feedback and recommendations, • Interface with manufacturers when dealing with equipment problems, • Conduct site surveys, • Attend weekly resource meetings and monthly department meetings, • Attend manufacturer and industry training in-house, off premises, and online, • Provide peer review of drawings This job description may be revised at any given time by Verrex Management. Employee Handbook Please refer to the Verrex Employee Handbook for company policies on such issues as employment wages, salary, benefits, services, reimbursable expenses, employee communications, safety, health, standards of conduct, and corrective action. Equal Opportunity Employer Statement Verrex is proud to be an equal opportunity employer. We are committed to creating an inclusive, respectful workplace where everyone can thrive.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Measurement and Verification (M&V) to join our team. The Energy Engineer (Measurement and Verification, or M&V) will plan and execute M&V activities to quantify energy and demand savings for retrofit projects, utility incentive programs, and Energy Savings Performance Contracts (ESPCs). This role focuses on rigorous, defensible savings calculations in accordance with IPMVP and program-specific protocols. Responsibilities • Develop M&V Plans: Author project-specific M&V plans following IPMVP Options A, B, C, and D, tailored to project scope, savings magnitude, and program requirements., • Establish Baselines: Collect, clean, and analyze pre-retrofit utility bill data, sub-metered data, BAS trends, and operating schedules to develop defensible baseline models., • Specify and Oversee Metering: Identify required metering points, specify and source data loggers and meters, coordinate installation, and validate incoming data streams for quality., • Perform Post-Installation Verification: Conduct site visits and spot measurements to verify equipment installation, operating conditions, and as-found schedules; document any commissioning or operational issues affecting savings., • Calculate Verified Savings: Build regression models (whole-building, hour-of-week, change-point) and engineering calculations to quantify energy, demand, and cost savings, including weather normalization where applicable., • Author M&V Reports: Produce baseline reports, savings reports, and annual reconciliation reports for clients, utilities, and program administrators; clearly communicate methodology, assumptions, and uncertainty., • Support Utility Incentive and ESPC Programs: Prepare incentive application packages, respond to program reviewer comments, and support performance guarantees on ESPC projects., • Data Analysis and Tooling: Use Excel, Python, R, or other tools to process large utility and interval datasets; apply statistical techniques such as regression, residual analysis, and outlier detection. Requirements • Bachelor's in Engineering (Mechanical, Electrical, Industrial, or Facilities) or related quantitative degree, • 1-3 years of experience in M&V, energy analytics, utility program implementation, or energy engineering, including at least one internship, co-op, or full-time role, • Working knowledge of IPMVP, ASHRAE Guideline 14, and FEMP M&V Guidelines, • Experience with regression analysis and weather normalization (e.g., NMECR, CalTRACK, ECAM, or equivalent methods), • Strong Excel skills required; experience with Python, R, or SQL preferred, • Understanding of HVAC, lighting, controls, and renewable systems, • Familiarity with utility tariffs, interval data formats (Green Button, ESPI), and BAS trend extraction, • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CMVP, or CEM credential preferred (or willingness to obtain within first year), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Summary: Attalon is seeking a Principal Electrical Engineer to design complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock generators, matched RF signals and FPGA complexes. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications with minimal oversite., • Design high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs., • Work with circuit layout and board assembly subcontractors., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 9+ years of circuit design experience or Master’s degree with 7+ years’ experience, or Ph.D. with 4+ years’ experience Skills Required: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Experience with programmable logic devices and control system circuit design., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Self-motivated, responsible and team player. Desired: • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Knowledge of circuit board thermal and EMI management, and ESD protection, • Experience with government defense design processes. Equal Opportunity Employer Statement: Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance: This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Job Summary: Attalon is seeking a Senior Principal Electrical Engineer to lead the design of complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock sources and FPGAs, multilayer and matched RF signals with high isolation. Provide technical leadership to less experienced electrical engineers across the organization. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications., • Lead the design of high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs and monitor PCB layouts., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Work with circuit layout subcontractors and board population subcontractors, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business., • Provide technical advice to less experienced electrical engineers., • Oversee work assignments across a small team of hardware engineers. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 15+ years of circuit design experience or Master’s degree with 12+ years’ experience, or Ph.D. with 9+ years’ experience Skills: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Strong background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Experience with programmable logic devices and control system circuit design., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Knowledge of circuit board thermal and EMI management., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Experience with government defense design processes., • Self-motivated, responsible, team player with leadership experience. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Building Commissioning to join our team. The Energy Engineer (Commissioning) will support and execute new construction commissioning (Cx) and retro-commissioning (RCx) projects across a portfolio of commercial, institutional, and multi-family buildings. This role focuses on verifying that building systems are designed, installed, tested, and operated to meet the Owner's Project Requirements and applicable code, certification, and performance criteria. Responsibilities • Develop Commissioning Documentation: Author commissioning plans, Owner's Project Requirements (OPR) summaries, Basis of Design (BOD) reviews, issues logs, and final commissioning reports., • Perform Design and Submittal Reviews: Review drawings, specifications, sequences of operation, and contractor submittals to identify deficiencies, design intent gaps, and commissioning impact items., • Create Pre-Functional and Functional Checklists: Develop equipment-specific Pre-Functional Checklists (PFCs) and Functional Performance Test (FPT) scripts for HVAC, plumbing, electrical, controls, and life safety systems., • Conduct Site Visits and Construction Observation: Perform installation verification site visits, document open issues, and coordinate with general contractors, mechanical/electrical contractors, controls vendors, and TAB agents., • Execute Functional Performance Testing: Lead and witness FPTs of air-side, water-side, BAS, lighting controls, and emergency power systems; verify sequences of operation and proper system response., • Support Retro-Commissioning Studies: Conduct onsite performance testing of existing building systems, identify Retro-Commissioning Measures, and quantify low- and no-cost operational savings., • Develop Systems Manuals and Training: Compile systems manuals and assist with O&M training to support owner handoff., • Support Certification and Compliance: Support LEED Fundamental and Enhanced Commissioning, ASHRAE Guideline 0/1.1/1.5, and project-specific certification requirements. Requirements • Bachelor's in Engineering (Mechanical, Electrical, or Facilities), • 1-3 years of experience in commissioning, MEP design, construction, or energy engineering, including at least one internship, co-op, or full-time role, • Working understanding of HVAC equipment (AHUs, chillers, boilers, VRF, VAV, terminal units), BAS sequences of operation, and basic electrical systems, • Familiarity with construction documents, specifications (CSI MasterFormat), and submittal review, • Exposure to LEED commissioning requirements and/or ASHRAE Guideline 0 preferred, • Comfortable working onsite in active construction environments (PPE required), • Proficient in Microsoft Office and PDF markup tools (Bluebeam, Adobe), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CxA, BCxP, or LEED AP credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Immediate Opening for a Forensic Engineer/ Structural Professional Engineer to work in our Warren, NJ location in charge of forensic investigations and expert witness testimony. The Forensic Engineer is responsible for leading and managing forensic investigation, report preparation and expert testimony (in deposition and trial) specifically for community association transitions, construction, claims and ensuring the successful delivery of projects within scope, budget and timeline. DUTIES & RESPONSIBILITES: Special Requirements Technical • Able to serve as an expert witness and depositions, mediations, or litigation, • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies/defects., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Reviews and interprets drawings, codes, specifications, project manuals, material specifications, etc., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Interprets and specifies a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities, • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations, and drawings., • Oversee and assist in the development and review of technical specifications, drawings, and construction documents. Essential Functions for All Technical Positions • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches., • Coordinates the recordation of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicates this feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry. (Not limited to exclusive company events.), • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Client Relations • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Foster strong client relationships, ensuring effective communication and understanding of project requirements and objectives. Internal Team • Works closely with the team to direct and provide the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Mentor and support junior team members, fostering their professional growth and development. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: Education • Bachelor’s degree from a four-year college or university in Structural/ Civil Engineering. Work Experience • Four plus years of experience in the architectural and engineering consulting industry., • Must have experience as an expert witness. Licenses & Certifications • Professional Engineer license required., • OSHA 10 Certification preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites. Skills • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. Estimated salary range for this position is $90,000 to $170,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs. Height and Access Equipment • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights. Outdoor Environment • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Adverse weather conditions like snow/ice, rain, and wind. Mobility • Extended periods of standing and walking, possibly on uneven or challenging terrains. Flexibility in Scheduling • Ability to adjust lunch hours based on project-specific demands, which might include working through regular lunch times. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR 2ARqcfr7S2

Job Description ABOUT ORGANOX: OrganOx is a commercial stage organ technology company dedicated to developing technologies to improve outcomes for patients with acute or chronic organ failure. The company was established as a spin out of the University of Oxford in 2008 and is now part of the Terumo Group. OrganOx is a pioneer in normothermic machine perfusion (NMP). It's flagship platform, the metra®, is available for use in the U.S., Europe, Canada, and Australia. It has been utilized in over 7,000 liver transplants to date to keep donor livers in a metabolically active state outside the body enabling longer preservation times and functional assessment of the organ prior to transplant, leading to an increased number of organs available for transplant. Founded in 1921, Terumo Corporation (TSE:4543) strives to fulfill its mission of “Contributing to Society through Healthcare” by providing a comprehensive range of solutions in the fields of therapeutic procedures, hospital operations, and life sciences in more than 160 countries and regions. Position Summary The Product Quality Engineering team at OrganOx is a technical quality engineering team responsible for monitoring, understanding, and improving product performance of the OrganOx Metra, a Class III medical device. The Product Quality Engineering team works closely with Product Sustaining Engineering and Contracted Suppliers to set in place quality control and management processes for externally built products and componentry, including sterilization and microbiology, supplier management, and contract manufacturing processes. The Product Quality Engineer position will be focused on hands on complaint investigation of returned product. This position is ideal for an entry-level engineer looking to grow and develop hands on quality engineering skills. The ideal candidate will have some prior laboratory or investigation experience, and showcase an ability to analyze product quality issues and work cross-functionally to solve problems related to product quality. The successful candidate is collaborative, has excellent communication and problem-solving skills, and is passionate about delivering world-class products that make healthcare more accessible, simpler, and safer. Listed below are the major responsibilities of the role and a brief description of some of the key tasks to be performed. This list is not totally exhaustive. This is a flexible, on-site role in our Madison, NJ office. Requirements Major Responsibilities Under direction from the Senior Product Quality Engineer and Senior Manager, Product Quality Engineering, the Product Quality Engineer may be responsible for the following: • Support root-cause investigations in response to customer complaints, • Support hands-on analyses of returned products to identify root causes of failures, • Receive all returned products and perform full decontamination process in accordance with established procedures., • Gather all relevant case details including service reports, system data, and clarifying information needed to support a thorough complaint evaluation with assistance from the Product Quality Engineer, • Execute hands on lab work such as monitoring running test circuits or preparing equipment for evaluation · Support development of investigation criteria and test methods to properly diagnose and root cause field failures • Raise Supplier Corrective Action Reports (SCARs) in response to product performance trends. Support timely closure of SCARs., • Work cross-functionally with other engineering teams and contracted suppliers to implement changes in manufacturing and inspection procedures to mitigate field failures. · Support CAPAs, Escalations, and engineering investigations in response to field quality issues. • Participate in the development and review of engineering change orders that impact product quality activities, • Perform DHR, Service History record, and PFMEA reviews in support of complaint investigations, • Adhere to the letter and spirit of OrganOx’s Code of Conduct and all other company policies. Skills & Experience • Familiarity with quality engineering principals such as complaint investigation, SCARS and CAPAs, • Experience in handling laboratory materials and conducting hands on lab investigations is a plus, • Excellent oral and written communication skills with the ability to communicate with audiences of varying technical skills, • Strong organizational skills with the ability to manage multiple tasks simultaneously, • A strong ability to prepare written technical plans and reports documenting failure investigations, • Proven ability to work cross functional and within global teams, fostering a culture of high collaboration, • Ability to be self-driven and solve complex problems independently. Committed to upholding OrganOx values in daily work and decision-making, • Experience in driving a global quality mindset across teams and geographies, • Demonstrated strong attention to detail and “do it right the first time” attitude Qualifications • Bachelor’s degree in an Engineering discipline (Electrical, Mechanical, Bio-Medical, etc.) or the equivalent work experience is required · 0-2 years of related hands-on engineering experience in Medical Devices, Pharmaceuticals or other regulated industry is required • Excellent technical report writing skills are required, • Strong experience with MS Office Products (Word, Excel, Visio, Project, PowerPoint, Outlook, etc.) is required, • Prior experience performing complaint investigations preferred, • Ability to travel 10-20% (domestically and internationally) A job description does not imply that the duties stated are the only ones to be performed by the job holder. Job holder will be required to follow any other job-related instruction as reasonably requested by their line manager or their designate. Benefits At OrganOx, We offer competitive compensation and comprehensive benefits available from day one, including health, dental, vision, disability coverage, and flexible spending accounts. Additionally, we offer a 401(k)-retirement plan with company matching after 90 days, paid time off, holidays, and additional leave benefits, as well as employee discounts and access to our onsite wellness facility. OrganOx supports work-life balance and provides opportunities for ongoing professional development.

Job Description Job Title: Junior and Senior Electrical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: BRUNS-PAK, an Information Technology/Data Center Facilities (A/MEP) firm, helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure that support operations in an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices. Artificial Intelligence and High-Performance Compute included. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Senior Electrical Engineer specializing in the design of electrical systems for Data Centers and Mission Critical Facilities. The ideal candidate should possess a solid background in designing appropriately sized Electrical Service, Generators, Switchgear, UPS Systems, transformers, PDU’s, and other Mission Critical equipment, incorporating reliability and redundancy into their designs. Key Responsibilities: • · Design and develop electrical systems for Data Center Facilities, ensuring reliability, redundancy, and efficiency., • · Utilize AutoCAD and potentially Revit for effective design and documentation., • · Apply diversified knowledge of engineering principles and practices to a variety of assignments in related fields., • · Make informed and independent decisions regarding engineering methods and techniques., • · Consult with supervisor on critical issues, new concepts, and policy matters, seeking guidance as needed., • · Develop test procedures and provide support during the commissioning of electrical equipment., • · Develop comprehensive specifications. Qualifications: • · Minimum of 10-15 years of relevant experience in electrical engineering, preferably in the field of Data Center Facilities., • · Junior Electrical Engineer – 10-15 years experience., • · Senior Electrical Engineer – 15+ years experience., • · Proficiency in AutoCAD 2D design is essential, and experience with Revit design is a plus., • · Registration as a licensed Professional Engineer (PE) is usually required for this position (Senior). Requirements: • · Extensive experience in designing electrical systems for Data Center Facilities., • · Strong knowledge of Generators, Switchgear, UPS Systems, Transformers, PDU’s, and other Mission Critical equipment., • · Ability to integrate reliability and redundancy into electrical system designs., • · Excellent problem-solving skills and ability to apply engineering principles to diverse assignments., • · Ability to effectively communicate technical solutions to diverse audiences both orally and in writing. Work Schedule: Normal business hours are Monday thru Friday 8-5pm. This role requires project travel. Benefits: • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in lasers and precision optics. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Details Attalon is seeking a Principal Laser Systems Engineer to lead the development of advanced lasers for aerospace applications. This engineer will take a lead role in laser systems engineering and system integration and test, including serving as a chief engineer, directing a team of laser experts, supporting program development and capture and serving as a customer-facing expert. Responsibilities • Laser Systems Engineering: Define and ensure compliance with system requirements, playing a key role in the structured decomposition of system-level specifications into sub-system and component specifications. Lead laser architecture development collaboratively with laser team across engineering disciplines and in collaboration with program management. Lead team to ensure that design concepts comply with customer specifications and are technically feasible and implementable., • Technical Leadership: Lead a group of highly skilled optical engineers, coordinating engineering activities within the team and across engineering disciplines. Exhibit a deep understanding of laser physics and engineering, especially for high-power diode-pumped solid-state and fiber lasers. Exhibits strong degree of ingenuity, creativity, and resourcefulness to develop highly advanced technologies, processes, and concepts related to the design, test, and evaluation of high energy laser optical systems. Assist planning of R&D projects, troubleshooting critical processes, solving unusually complex problems, and providing technical expertise and guidance to the organization., • Business Development: Serve as a spokesperson on new business opportunities and specialized projects. Serves as customer interface in meetings and other industry events as required. Lead and write technical proposals for the development of new business and assist in evaluating technical requirements, identifying exceptions, and preparing cost estimates for customer quotes., • Management and personnel development: Serve as a manager and mentor of small team of talented laser engineers whose experiences range from senior chief engineers to new graduates. Minimum Qualifications • B.S. in engineering field and 10-12 years of relevant experience, • Strong demonstrated technical background in lasers and laser technology, especially in high power fiber and diode-pumped solid-state lasers. Expert in laser physics and design. Demonstrated successful development of new, practical, challenging laser designs., • Structured engineering background including familiarity and experience with systems engineering practices for the new product design and development lifecycle, including mission analysis, requirements definition and derivation, establishing error budgets / engineering constraint budgets, interface definition, and tracking compliance progress throughout the development lifecycle., • Familiarity and experience with integration and test of complex laser systems including integration planning and sequencing, diagnostics and troubleshooting, formal verification planning and test design, and development of formal verification and qualification procedures. Preferred Qualifications • M.S. or Ph.D. in optics, applied physics or electrical engineering preferred with 8-10 years of relevant experience. 7+ years managerial and leadership experience., • Familiarity with executing to Department of Defense Contracts as Prime contractor or major Subcontractor is a plus. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Electrical Engineer - Pharmaceutical Manufacturing The Opportunity We're looking for an experienced Electrical Engineer to support critical infrastructure within a pharmaceutical manufacturing environment. This is a hands-on role for someone who knows electrical systems deeply and thrives in a fast-paced, highly regulated setting where uptime and compliance aren't optional. What You'll Do Own maintenance and reliability of high voltage, low voltage, and power distribution systems including panels and sub-transformers Execute preventive maintenance, calibration, and validation programs on time and to GMP standards Lead electrical installation and retrofit projects from scope through commissioning Partner with cross-functional teams to specify, procure, and commission equipment Manage vendor relationships, service agreements, and spare parts inventory Support regulatory inspections, audits, and change control processes Respond to electrical and utility breakdowns with urgency What You Bring Bachelor's degree in Electrical Engineering 6+ years of experience in electrical engineering within pharma or regulated manufacturing Strong knowledge of high/low voltage systems, utilities, and power distribution Working knowledge of NEC (NFPA 70), NFPA standards, and OSHA electrical safety requirements Familiarity with 11kVA systems and high voltage operations Ability to read electrical schematics, P&IDs, and construction blueprints Experience with regulatory inspections and GMP compliance Proficiency in AutoCAD and Microsoft Office Self-starter with strong communication skills and calm under pressure

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we're headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. What We’re Looking For: We value enthusiasm, curiosity, and a willingness to learn. While prior experience is a plus, we welcome candidates with 4+ years of professional experience who are eager to grow in a supportive environment. What You’ll Do: • Design and development of electrical systems for solar and battery storage projects, • Conducting feasibility studies, power system modeling, and electrical calculations, • Creating and reviewing electrical drawings, specifications, and technical documentation, • Ensuring designs comply with NEC, IEEE, NFPA, and NERC standards, • (If licensed) Stamping engineering drawings, • Providing mentorship and leading teams (for mid/senior-level candidates), • Supporting construction, commissioning, and site visits, • Staying current on renewable energy technologies, • Contributing technical expertise to business development and proposals Must-Haves:, • Bachelor’s in Electrical Engineering (or equivalent) from an accredited institution, • FE/ EIT Certification, • Minimum 3-5 years of experience in Electrical Engineering, • Strong analytical and problem-solving skills, • Proficiency in Microsoft Office (Word, Excel, Outlook), • Passion for renewable energy and sustainability, • Valid U.S. driver’s license and reliable transportation, • Willingness to travel and work flexible hours as needed Nice-to-Haves:, • MS in Electrical Engineering, • Internship or project experience in power systems or renewables, • Involvement in student/professional engineering societies, • Experience with electrical design or consulting Benefits: 401(k) + company match Health, dental, and vision insurance Life insurance Unlimited PTOProfessional development assistance Bonus opportunities Supportive, growth-oriented team environment #LI-ANSWhy Join ANS?, • Work on high-impact projects that shape communities and the environment., • Be part of a team that values collaboration, mentorship, and professional growth., • Gain hands-on field experience while developing technical and project management skills., • Enjoy a supportive workplace culture that encourages innovation and creative problem-solving., • Take advantage of career development opportunities, including continuing education and industry involvement. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description As part of a team you will design and supervise the manufacturing of control and monitoring systems for Commercial and Naval Ships. You will work to produce equipment drawings , electrical wiring diagrams,cable interconnection drawings and interface designs. Assist in the functional design of HMI, PLC architecture, networks and communication interfaces.Perform Factory acceptance test of the finished system to both customer and regulatory societies. Support commissioning and sea trials from the office but at times visiting the ship.Finally provide technical advice and assistance to sales, and service personnel. Company DescriptionWe are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ and Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.We are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ\r\nand Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.

Job Description • Performs all Maintenance Engineer II job duties along with any listed below., • Equipment failure decisions to stop or get a break in the process for immediate repair. Change mode till down day., • Modification or part substitution for part unavailable., • Make decision for outside service when needed, • Give proper training and guidance to lower levels. Training., • Identify quality issues. Work towards solutions. Product and efficiencies., • Work with or get application help when needed to replace or build equipment, • Understand and become proficient in all plant PM’s, • Make good labor usage and problem criteria decisions if multiple problems exist. Take charge of circumstances., • Know which issues to contact the Engineer or other management, • Must be able to trouble shoot and repair any mechanical issue pertaining to process equipment, • Must understand all normal process operations and be able to determine the problem by symptom and point of process failure., • MMI CTC knowledge of PLC hardware to field control point, operating status and hardware functions, (fault, I/O addressing, power supply, operation indicators) and actions required for symptom. Card id. Ladder logic print reading for surface level trouble shooting. ( most times external hardware failure) Safely replace bad cards., • Proficient in at least three trade skills. Plumbing, welding electrical, machine tool etc., • Become familiar with control devices such as temp controls. Burner control, and other programmable devices you may need to replace. Understand how to read technical manuals. #ZR

Job Description Hampton Inn by Hilton, South Plainfield-Piscataway-205 New World Way, South Plainfield, NJ 07080 We are currently looking for Chief Engineer to join our Team! Our Hampton Inn with 107 guest rooms, is located off I-287/I-95 in South Plainfield, a half-mile from Hadley Center and 10 minutes from Piscataway. Rutgers University – New Brunswick is six miles away and we’re close to a variety of corporate offices. The New Jersey Convention and Exposition Center is nine miles away and we’re 30 minutes from Newark Airport. We serve a daily hot complimentary to all our guests. A great place to stay – a great place to work. The Hampton Inn is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. Buffalo Lodging Associates, a hotel management company based out of Canton, MA has put an emphasis on true hospitality since being founded in 1996. While building an extensive portfolio of 50 hotels, we’ve partnered with the most respected hotel brands in the business including Marriott International, Hilton Worldwide, InterContinental Hotels Group, Choice Hotel International and Radisson Hotels. The core and heart of our company lies within our dedicated associates, for we wouldn’t be an award-winning company without each and every one of them. A GROWING HOTEL MANAGEMENT COMPANY – COME JOIN US! We value our associates with competitive compensation plans and other benefits and perks. Some of these benefits include: • Weekly pay, • Paid vacation, sick days and holidays, • Medical, dental, vision insurance, • 401K Retirement plan with company match, • Travel discounts on our branded properties, • Career growth opportunities Role: The Chief Engineer takes ownership and pride in the maintenance of the property, while fostering the Buffalo Lodging Associates (BLA) culture and values- Excellence, Passion, Integrity, Inclusive. Responsibilities include: • Creating a safe and appealing property by completing routine preventative maintenance on laundry equipment, heating and air conditioning units, ice machines, fire extinguisher, fire and smoke alarms, lawn sprinkler, lawn equipment, exercise equipment and plumbing, • Maintaining work order assignment boards and tracking completed/pending work orders I and following up on all incomplete work orders to inform the requesting guest or department of the status., • Evaluating and selecting quality vendors that are reliable and provide good value for their price, • Supervisory duties of the Maintenance Assistant on site including interviewing, hiring, training, appraising performance, rewarding and disciplining; planning, assigning, directing work, addressing complaints and resolving problems. What You Bring: • At least three years of supervisory or lead mechanic experience in a hotel or related field, • Demonstrated general mechanical skills are necessary, • Basic repair, painting, wall covering HVAC, electrical work, plumbing, boiler operation, pool maintenance and general maintenance skills required, • Vocational training is preferred but not required, • Must have valid drivers license, and acceptable driving history subject to company approval. Buffalo Lodging provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination.

Job Description Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in lasers and precision optics. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Details Attalon is seeking an Optical Engineer to be part of a small, multi-discipline team of engineers as they develop high-tech laser systems for aerospace applications. This engineer will play a wide range of support roles, helping assemble and align lasers, splice optic fibers, set up measurement apparatus and character laser performance. A strong acumen and desire to spend time in the lab working with equipment is necessary. On-the-job training will be available to broaden skillsets. Variable entry levels are available based on the applicant’s experience and skillset. Responsibilities • Assembly & Fabrication: Perform assembly, repair, and testing of electrical, fiber optic, bulk optic, and opto-mechanical assemblies for lab experiments, prototypes, and customer deliverables, following detailed work instructions. This includes soldering, cable harness fabrication, and fiber optic splicing., • Build Prototype Systems: Build and modify prototypes based on engineering specifications., • Testing & Troubleshooting: Conduct functional testing of electrical and optical/fiber assemblies using various test equipment, such as multimeters, oscilloscopes, arbitrary waveform generators, spectrum analyzers, power meters, beam profilers, and signal generators. Troubleshoot and diagnose issues with assistance from designers, identifying root causes and implementing corrective actions. Write test procedures and document test results accurately and thoroughly. Assist engineers in performing experiments and collecting measurement data., • Support R&D Labs: Assist engineers with setting up experiments and assembling test fixtures. Coordinate receiving of material and maintain inventory of components and supplies. Perform routine maintenance and calibration of lab equipment. Minimum Qualifications • Education: Associate's degree in Electronics Technology, Fiber Optics, or a related technical field, with 1-2 years of relevant experience; or an equivalent combination of education and experience., • Hands-On Skills: Experience working in a lab with high-tech equipment. Experience using test equipment such as multimeters, oscilloscopes, arbitrary waveform generators, spectrum analyzers, power meters, beam profilers, or signal generators. Experience with hand tools and basic power tools. Strong attention to detail., • Technical Know-How: Proven ability to read and interpret technical drawings, schematics, and work instructions. Strong problem-solving and troubleshooting skills. Proficiency with Microsoft Office Suite (Outlook, Word, PowerPoint, Excel, Teams)., • Attitude: Enthusiastic attitude. Willing to put in effort to meet schedule deadlines. Ability to work independently and as part of a team. Preferred Qualifications • Education: Bachelor’s degree in Electronics Technology, Fiber Optics, or a related technical field, with 2-4 years of relevant experience; or an equivalent combination of education and experience., • Test-set development: Able to program in LabView to build test sets for data collection., • Fiber-optic experience: Experience assembling and splicing optical fiber and fiber-coupled components., • Electronics experience: Ability to interpret electrical schematics. Working knowledge of analog and digital electronics. Strong soldering skills. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job DescriptionSalary: $70k-85k Position Overview The Field Engineer is a critical member of our growing Engineering department at GRA Design Studio, responsible for performing detailed on-site investigations that support project feasibility, engineering decisions, and design development. This role focuses primarily on conducting MEP-focused engineering site surveys, capturing existing conditions, and identifying system-related constraints. The Field Engineer will also support due diligence analysis based on field observations and assist with production work as needed to ensure project continuity and team flexibility. Key Responsibilities MEP-Focused Site Surveys & Field Assessments • Conduct thorough on-site MEP field surveys, documenting existing mechanical, electrical, plumbing, fire protection, and related building systems., • Capture accurate measurements, field notes, and photographic documentation to support engineering and architectural teams., • Identify system deficiencies, capacity considerations, code-related issues, and potential design or construction challenges., • Coordinate site access, interact with building personnel, and ensure all field data is collected safely and efficiently. Due Diligence & Analysis • Perform due diligence evaluations informed by on-site observations, focusing on system conditions, risks, and feasibility., • Prepare clear and concise due diligence reports summarizing findings, system impacts, and recommendations., • Assist in verifying compliance with applicable codes and standards related to MEP systems and existing building conditions., • Communicate findings to internal engineering and design teams to support scoping, planning, and decision-making. Production & Project Support • Drafting, documentation updates, and production tasks in AutoCAD, Revit, and other software., • Incorporate field findings into engineering drawings, coordination sets, and project documents., • Support engineers and architects with redlines, revisions, and project coordination., • Provide flexibility across fieldwork, analysis, and production based on project workload and departmental needs. Qualifications • Bachelors degree in Engineering, Architecture, Construction Management, or related field preferred., • 13 years of experience in field engineering, MEP surveys, construction, or similar technical roles., • Working knowledge of building MEP systems, existing facility evaluations, and construction processes., • Proficiency with field equipment, digital measuring tools, and drafting platforms (AutoCAD required; Revit a plus)., • Strong documentation skills and attention to detail in fast-paced field environments., • Ability to work independently at job sites and collaborate effectively with engineering, architectural, and project management teams., • Clear communication skills, with the ability to present technical findings to both technical and non-technical audiences. Core Competencies • MEP Field Investigation, • Technical Assessment & Problem-Solving, • Time Management & Organization, • Clear Written & Verbal Communication, • Cross-Disciplinary Collaboration, • Adaptability & Flexibility Work Environment • Frequent travel to project sites required., • Work may include indoor, outdoor, active construction, or existing facility environments., • Occasional office-based work for reporting, coordination, and production tasks. Benefits: • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K with up to 3% match), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Energy Modeling to join our team. The Energy Engineer (Energy Modeling) will perform whole-building energy simulations to support design decisions, code compliance, certification programs, and decarbonization planning. This role focuses on accurate, well-documented building energy models that translate design intent into actionable energy and cost insights. Responsibilities • Perform Whole-Building Energy Modeling: Develop baseline and proposed energy models in eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP for new construction, major renovation, and retrofit projects., • Drawing and Specification Review: Review architectural, mechanical, electrical, plumbing, and envelope documents to identify model inputs, including geometry, constructions, occupancy, lighting, plug loads, HVAC systems, and operating schedules., • Code Compliance and Certification Modeling: Produce ASHRAE 90.1 Appendix G performance-path models, IECC compliance models, and certification submissions for LEED EAp2/EAc1, ENERGY STAR, Passive House, and similar programs., • Support Local Decarbonization Compliance: Develop models supporting compliance with local laws and stretch codes (e.g., NYC Local Law 97, Title 24, Boston BERDO, Washington Clean Buildings Act)., • Parametric and Design Optimization Studies: Run parametric analyses on envelope, HVAC systems, controls, and renewable energy options; quantify life-cycle cost and carbon impacts to support design decisions., • Calibrate Existing Building Models: Calibrate energy models against utility billing or interval data per ASHRAE Guideline 14 standards for retro-commissioning, deep retrofit, and ESPC projects., • Renewable Energy Modeling: Support photovoltaic, solar thermal, geothermal, and battery storage modeling using tools such as PVsyst, SAM, and integrated simulation tools., • Generate Technical Reports: Author energy modeling reports, narratives, and exhibits suitable for clients, design teams, certification reviewers, and authorities having jurisdiction. Requirements • Bachelor's in engineering (Mechanical, Architectural, Electrical, or Facilities) or Building Science, • 1-3 years of energy modeling experience, including at least one internship, co-op, or full-time role, • Hands-on experience with at least one of: eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP, • Working knowledge of ASHRAE 90.1 (especially Appendix G), ASHRAE 62.1, and applicable energy codes (IECC, Title 24, state stretch codes), • Understanding of HVAC system types, controls, building envelope, and renewable systems, • Familiarity with LEED energy modeling submission requirements preferred, • Strong Excel skills; experience with Python, Ruby, or scripting against modeling tools is a plus, • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, BEMP, CEM, or LEED AP BD+C credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we're headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. What We’re Looking For: We value enthusiasm, curiosity, and a willingness to learn. We welcome candidates with 8-15 years of professional experience who are eager to grow in a supportive environment. What You’ll Do: • Lead design and development of electrical systems for solar and battery storage projects, • Conducting feasibility studies, power system modeling, and electrical calculations, • Creating and reviewing electrical drawings, specifications, and technical documentation, • Analyze designs to ensure compliance with NEC, IEEE, NFPA, and NERC standards, • Stamping engineering drawings., • Providing mentorship and leading teams., • Contributing technical expertise to business development and proposals Must-Haves:, • Bachelor’s in Electrical Engineering (or equivalent) from an accredited institution, • PE Licensure, • Minimum 8 years of experience in Electrical Engineering, • Strong analytical and problem-solving skills, • Proficiency in Microsoft Office (Word, Excel, Outlook), • Passion for renewable energy and sustainability, • Valid U.S. driver’s license and reliable transportation, • Willingness to travel and work flexible hours as needed Nice-to-Haves:, • MS in Electrical Engineering, • Internship or project experience in power systems or renewables, • Involvement in student/professional engineering societies, • Experience with electrical design or consulting Benefits: 401(k) + company match Health, dental, and vision insurance Life insurance Unlimited PTOProfessional development assistance Bonus opportunities Supportive, growth-oriented team environment Why Join ANS? Work on high-impact projects that shape communities and the environment. Be part of a team that values collaboration, mentorship, and professional growth. Gain hands-on field experience while developing technical and project management skills. Enjoy a supportive workplace culture that encourages innovation and creative problem-solving. Take advantage of career development opportunities, including continuing education and industry involvement. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of multi-disciplinary engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Senior Geotechnical Engineer to join our team in our NJ office. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. “MUST-HAVE” PROFILE OF THE SUCCESSFUL CANDIDATE INCLUDE: • BS in Civil Engineering, Geology, or related degree, • Valid US Drivers License, and a reliable means of transportation, • Flexibility and willingness to travel, on occasion, and for multiple consecutive days periods of times (est. up to one week at a time, once per month), • Strong communication and organizational skills, ability to find solutions to problems, and get-it-done attitude!, • Proficiency with Microsoft Office products, • Minimum 8 years of experience in consulting engineering, or related field, • Experience in preparing Engineering Reports with strong technical writing skills, • Experience with working within and leading team environments, • Working knowledge of geotechnical principles and engineering design“NICE-TO-HAVE” SKILLS FOR THE SUCCESSFUL CANDIDATE MAY INCLUDE:, • Technical licensure track including EIT, GIT, PE, PG, PMP, or similar., • Experience in planning, implementing, overseeing, and managing subsurface investigation programs, • Prior experience with geotechnical investigations, including soil borings, rock coring, and material testing, • Experience with design of foundations, support of excavation systems, and preparing reports, • Prior experience with geotechnical software (gINT, GeoStudio, LPILE, ALLPILE, DeepEx, etc.), • Familiarity with renewable energy sectorTHE CHALLENGES THAT LIE AHEAD INCLUDE:, • Working alongside a team of high-performing engineering and technical professionals, • Performing geotechnical field investigations, construction observation, and engineering evaluation and technical analysis, • Preparing technical reports and summaries, and interfacing directly with coworkers, clients, and stakeholders to communicate findings and recommendations, • Completing technical analyses, including foundation design, support of excavation, and other engineering evaluations, • Actively participating in your career growth, including the opportunity to join elective continuing education courses, being involved in community and professional societies, and managing projects and experiences that stretch you outside of your comfort zone to grow you as a professional. ANS Offers the following benefits to full-time employees: 401(k) matchingDental insuranceHealth insuranceLife insuranceUnlimited Paid time offProfessional development assistanceVision insurance If you’re ready to work on impactful projects that shape the renewable energy future, ANS is the place for you. Your expertise will make a difference- help us deliver engineering solutions that matter. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility., • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A CMMS Engineer, to support our clients with activities related to the use, operation, migration, or analysis of their Computerized Maintenance Management Systems (CMMS). This is a on-site position with occasional travel up to 25% of the time. You will report directly to our CMMS Service Lead. Responsibilities Essential Duties and Responsibilities— • Project/ Migration, • Perform field walkdowns to verify the accuracy of the equipment data., • Carry out all technical data reviews and data entries in the system., • Translate and cleanse raw data in preparation for Data Migration., • Assist in the preparation of client project status reports and immediately communicate project deviations or delays to the Project Manager., • Meet regularly with all stakeholders to discuss progress, communicate changes, and support the entire change effort., • Assist with other continuous improvement and optimization projects, as required., • BI/ Optimization, • Extract and analyze data using business intelligence tools to aid business decisions., • CMMS Support, • Provide support to end-users in navigating and utilizing the CMMS., • Input and maintain asset and equipment data in the CMMS., • Track client requests and assist with metric and key performance indicators (KPI) reporting., • Other duties as assigned. Qualifications Required Knowledge, Skills and Abilities: • Preferred: Associate degree in a STEM field, or trade certification in instrumentation, mechanical, electrical, or related engineering field., • 1 -3 years’ experience in CMMS-related work (front end). Life Science experience preferred but not required., • Experience with either SAP or Hexagon., • Proficient in MS Office platforms, particularly MS Excel. BI Tool knowledge a distinct advantage., • Familiarity with data management processes (paper-based / digital change control processes)., • Ability to perform field verification / data collection for assets to be added to / changed on the CMMS., • Ability to complete projects on time that meet our quality standards., • Ability to quickly understand new software platforms., • Ability to build data for CMMS systems to the highest level of quality (averaging zero errors consistently)., • Able to travel up to 25% of the time. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Job Description Join the H&S Family of Bakeries – the team behind H&S Family of Bakeries includes Northeast Foods, H&S Bakery and Schmidt Baking Co. – the largest family-owned variety baker in the United States. Headquartered in Baltimore, Maryland, we operate a network of 10 bakeries and 30 distribution centers across the country to deliver fresh, high-quality baked goods nationwide, from fast food and quick-service restaurants to cafeterias, hospitals, grocery stores and universities to name a few. We’re passionate about innovation in manufacturing and distribution, leading the way in the industrial baking industry, while creating opportunities for our people to grow and succeed. Our Core Beliefs: Be Well, Work Well | Create an Experience | Life-long Learning | Do the Right Thing As the Chief Engineer, you will oversee and manage all aspects of the maintenance department including, but not limited to, maintaining equipment, maintaining building and grounds, parts purchasing and inventory, maintenance budgets, capital project management, mechanic training and development, maintenance hiring, work scheduling and follow up inspections, predictive and preventative maintenance program management, and interdepartmental director of engineering. Chief Engineers report directly to the plant manager and indirectly to the corporate communications. In this role, you will: • Follow up on preventative maintenance, work orders, and emergency repairs to, • ensure they are being done correctly., • Work closely with production to make sure their needs are met., • Work with sanitation to make sure scheduled shutdowns are effective for both departments., • Schedule and plan for work to be done during normal shutdowns., • Organize and maintain a proper parts inventory as well as oversee all maintenance purchasing and contractors., • Be responsible for hiring maintenance mechanics., • Work with maintenance personnel individually to help them improve and grow in their careers., • Facilitate training programs for all maintenance employees., • Troubleshoot and repair mechanical, hydraulic, pneumatic and electrical systems., • Manage food safety requirements as they pertain to maintenance., • Manage and follow up on all safety programs and related training., • Work in a fast-paced environment, primarily hands-on position., • Participate in staff meetings, operations shift meetings, as well as safety and food safety meetings and inspections may be required., • Available to work on call during off hours for trouble shooting from remote and on-site as necessary. Qualifications: • Minimum of five years’ experience as a maintenance mechanic., • High school diploma, GED or equivalent., • Experience working in the food industry, preferably in baking., • Experience with Mixers, Dough Handling Equipment, Ovens, Cooling Systems, Packaging Equipment and Refrigeration Systems. Conveyor Systems. HVAC Systems and CMMS (Computerized Maintenance Management System) software and Diagnostic Tools., • Possess strong leadership qualities., • Strong mechanical skills., • Strong electrical troubleshooting ability., • Willing and available to work different shifts, weekends, and holidays as needed. Essential Physical Requirements: • Ability to stand and/or walk for extended periods of time during a shift, maintaining a normal range of motion in all extremities., • Ability to lift and carry up to 50 pounds, and push and pull heavy wheeled equipment or carts in a fast-paced manufacturing environment, with or without reasonable accommodation., • Ability to reach, bend, stoop, and crouch to access equipment, tools, or materials., • Ability to use arms, hands and fingers to handle or operate machinery, tools or controls., • Ability to perceive and respond immediately to visual and audible safety alerts and warnings to ensure the safety of self and others in a fast-paced, hazard-sensitive environment with or without reasonable accommodation., • Ability to work in environments with varying temperatures, noise levels, and airborne particles, odors and fumes., • Ability to climb stairs, ladders, or work platforms as required by the position., • Ability to sit for prolonged periods using office equipment and computer systems., • Ability to wear required personal protective equipment (PPE) and protective clothing for extended periods of time, with or without reasonable accommodation. What’s in it for you? At H&S Family of Bakeries, we value our team members and work hard to create a workplace where people can grow and thrive. Along with equitable pay, we provide exceptional benefits designed to support you both at work and in life. Our comprehensive and affordable packages include medical, dental, and vision coverage; short-term disability; retirement savings; paid time off; flexible spending accounts; an employee assistance program; and, of course, some very cool company swag. Equal Opportunity Employer H&S Family of Bakeries is proud to be an Equal Opportunity Employer. We welcome diversity and are committed to creating an inclusive environment for all team members. We consider all qualified applicants without regard to race, color, religion, sex, national origin, political affiliation, sexual orientation, gender identity, marital status, disability, genetic information, age, membership in an employee organization, or any other factor unrelated to merit. Offer Determination Guidelines: The salary range listed for this position is provided in accordance with applicable transparency laws and serves as a general guideline. However, it does not represent a guaranteed salary offer. Actual compensation will be determined based on a variety of job-related factors, which may include but are not limited to relevant experience, skills, education, internal equity, market data, and geographic location, including local cost of living. The final offer may vary outside the posted range based on these considerations. Thank you for your interest in joining our team. Due to the high volume of applications we receive, we are unable to respond to every applicant individually. If your experience and qualifications align with the requirements of the position, a member of our HR team will reach out to you directly. #ZP

Job DescriptionJob Summary: Immediate Opening for a Civil Engineer to work in our Warren, NJ office location. Work Experience • 5+ years’ minimum experience required in Engineering, Construction Management and/or a combination of related education and experience., • Experience with site/civil work including: stormwater/drainage, asphalt and concrete pavement, grading/topography, MSE wall, or other related site features, etc. Estimated salary range for this position is $90,000 to $150,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license Licenses and Certifications • Professional Engineer (P.E.) license required, or ability to obtain within 1-year of hire., • OSHA 10 hour certified preferred, otherwise must complete within three months from date of hire, fees covered by Company., • Must have or be able to obtain an unrestricted valid Driver’s License. Job responsibilities would include: • Conducting site evaluations and prepare investigation reports., • Preparing design documents including construction drawings, bid documents and technical specifications related to site/civil projects which may include: stormwater/drainage, asphalt or concrete pavement, grading/topography, MSE wall, or other related site features, etc., • Recording field measurements and performing civil engineering calculations related to the noted project types., • Preparing quantity takeoffs and cost estimates., • Representing clients in obtaining and evaluating bids and awarding construction contracts., • Managing site/civil construction projects:, • Monitoring contractors work for conformance to project construction documents, drawings, and specifications., • Working as our client’s representative on site during work., • Reviewing and approving change orders., • Knowledge of local and state building codes, and ability to apply to work., • Familiarity with local jurisdictional permitting processes and requirements for site/civil project impacts, such as: wetlands, land disturbance, E&S control, pervious/impervious drainage, etc., • Collecting post-project feedback to look for issues and opportunities for improvement., • Work closely with teams to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Perform other related duties as assigned.This position will be balanced between the field on job sites and in the office to help prepare construction documents and reports. Qualifications Education • Bachelor’s degree in Civil Engineering from an accredited four-year college or university or equivalent experience.Skills, • Ability to perform technical civil engineering calculations and design construction drawings /documents with limited oversight., • Excellent written and verbal communication skills., • Excellent computer skills with proficiency in MS Office Suite., • Strong organizational skills and the ability to handle multiple projects at one time., • Ability to interact in a professional manner with clients and colleagues., • AutoCAD proficiency (preferred)., • Ability to work individually or with team members and work collaboratively with other disciplines., • Ability to work in the field and to travel outside local areas as required., • Provide exceptional customer service. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. Employee Benefits We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include: • Medical, Dental and Vision coverage, where we pay a portion of the premiums., • Supplement Insurance Options- Life, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans., • Fully Company funded Short-Term & Long-Term Disability benefits., • 401K- A retirement program where we provide a match up to 3%., • We offer Paid Holidays, Paid sick time and Vacation days., • Employee Referral Program., • Employee Recognition Program., • Continuing Education Reimbursement., • Professional Licensing Assistance., • Jury Duty Leave., • Maternity/Paternity Leave., • Mobile Phone Reimbursement/ discounts., • Employee Assistance Program., • Workers Compensation. Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR tXi1P1LtEo

Job Description Electrical Engineer – Iselin, NJ Direct Hire/ Permanent Placement $90k – $150k Base, 1st year onsite and then hybrid schedule, Full benefits, 401k THE CLIENT Multi-disciplinary Engineering Consultancy with their hands in numerous fields and building types: Residential, Commercial, Healthcare, Mission Critical, K-12, Higher Ed, Restaurant, Warehouse, etc. ROLE/ RESPONSIBILITIES/ SKILLS/ EXPERIENCE • Electrical design of power distribution, lighting, fire alarm in accordance to NEC codes and standards, • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels and emergency generators, • Large scale and Complex building projects, • Project Management, • Site visits, Site Surveys, respond to RFIs, and reviewing shop drawings, • Revit, AutoCAD, SKM, COMCheck, AGI 32, • Degreed BSEE BSAE or equivalent, • EIT, PE, LEED Preferred, • 3+ years of relevant experience, • No Sponsorship available

Job DescriptionThe Role: Director of Building Envelope Location: Warren, NJ SUMMARY We are seeking a motivated Director of Building Envelope Project Engineer with a strong interest in investigation, repair, and rehabilitation of existing buildings. The position focuses on roofing, façade, structural, and balcony/deck rehabilitation projects, primarily within the multifamily sector. The engineer will provide technical evaluations, structural & envelope assessments, design support, and construction-phase engineering oversight. Depending on experience, candidates may assist in investigation, design development, structural/envelope detailing, report writing, and construction administration. Estimated salary range for this position is $135,000 to $180,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable Primary Responsibilities General Engineering / Project Support • Perform engineering evaluations of building envelope and structural systems, including roofs, façade components, balconies, decks, and related structural elements., • Prepare technical reports summarizing existing conditions and recommended repair strategies., • Assist with development of repair drawings, details, and specifications, with oversight from senior engineers., • Prepare written correspondence to clients, contractors, and code officials., • Manage and maintain organized technical records, drawings, test data, field photos, and project documentation., • Review project scopes, budgets, and schedules with supervising engineers to ensure deliverables are met., • Assist in construction administration activities—including reviewing RFIs, submittals, change orders, and contractor payment applications.Participate in internal QA/QC reviews to ensure accuracy and technical completeness., • Review contractor submittals, change orders, schedules, and payment applications as directed., • Assist in troubleshooting construction issues with contractors based on engineering judgment Field Responsibilities • Conduct on-site engineering evaluations of roofs, façades, balconies, decks, structural framing, waterproofing systems, and building envelope components., • Perform field testing and documentation (moisture testing, probes, level checks, structural observations, etc.)., • Prepare detailed field sketches, measurements, and photographic documentation., • Observe repair work in progress to verify compliance with drawings, specifications, and industry standards., • Communicate observed deficiencies and corrective recommendations to senior engineers and project managers., • Work on multiple field projects involving roofing, cladding, waterproofing, decks, balconies, and structural rehabilitation. Client Relations & Business Development • Attend client meetings with senior personnel, document meeting minutes and follow-up items., • Participate in discussions on scope, budget, and technical approach., • Represent The Falcon Group at technical seminars, networking events, continuing education sessions, and industry meetings. Supervisory Responsibilities This position currently has supervisory duties but may evolve based on growth and performance. Qualifications Licenses & Certifications • A Professional Engineering (PE) or a Registered Architect (RA) is needed., • Building envelope certifications (IIBEC: RRO, RRC, RWC) or ICC certifications are a plus., • OSHA-10 preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Experience, • Minimum of 10 years of experience with an engineering consulting firm, building envelope firm, structural engineering practice, or construction industry performing structural/envelope-related work. Education • Bachelor’s degree in Civil Engineering, Structural Engineering, Architectural Engineering, or related field., • Master’s degree is a plus but not required. Skills & Additional Requirements • Understanding of construction plans, technical specifications, and industry standards., • Ability to identify typical structural defects, building envelope failures, moisture intrusion mechanisms, and waterproofing deficiencies., • Strong technical writing skills and attention to detail., • Ability to manage multiple projects concurrently and meet deadlines., • Knowledge of building codes, including IBC, IRC, and structural standards., • Professional, organized, and capable of fieldwork including ladders, attics, roofs, and difficult access areas., • Ability to work independently and collaboratively with engineers, architects, and construction professionals., • Familiarity with AutoCAD or similar drafting software is a plus., • Familiarity with CSI MasterSpec or technical specification writing preferred.Physical Demands, • Ability to lift up to 40 lbs., • Comfortable using ladders, lifts, scaffolds, and roof access equipment., • Ability to perform site work in extreme temperatures, humidity, and adverse weather., • Ability to work at heights up to 10 stories and in confined spaces (attics, crawlspaces)., • Significant standing/walking on uneven or challenging terrain.Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Powered by JazzHR 3zS2GNNw0S

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility, • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A Maintenance and Reliability Engineer, to serve as a key technical resource supporting clients in optimizing maintenance and reliability programs, driving performance improvements, and sustaining asset health. You will balance hands-on maintenance leadership with analytical reliability strategies that reduce downtime, extend asset life, and improve overall equipment effectiveness (OEE). This is an on-site position with occasional travel up to 25% of the time. You will report directly to our Maintenance and Reliability Service Leader. Responsibilities Essential Duties and Responsibilities • Adhere to stringent regulatory requirements, such as FDA regulations, ensuring all activities and equipment meet industry standards for quality and safety., • Lead and execute preventive and predictive maintenance activities on production, utility, and process equipment., • Conduct data-driven analyses of equipment reliability trends and develop improvement recommendations., • Implement and sustain CMMS processes including PM optimization, asset hierarchies, and work management best practices., • Support and facilitate root-cause analysis (RCA) and corrective action implementation., • Partner with cross-functional teams (engineering, operations, quality, EHS) to align M&R initiatives with business goals., • Support regulatory compliance (FDA, GMP) and ensure documentation meets company and industry standards., • Coordinate vendor and contractor support for maintenance and reliability improvement activities., • Contribute to MRO spare parts management, bill of materials accuracy, and lifecycle cost reduction., • Participate in continuous improvement and digital transformation initiatives leveraging data visualization, AI, or BI tools. Qualifications Required Knowledge, Skills and Abilities • 3 – 5 years of experience in maintenance and/or reliability engineering., • Experience with either SAP or Hexagon is preferred., • Demonstrated experience in preventive and predictive maintenance programs., • Working knowledge of reliability analysis methods and continuous improvement tools., • Proficiency with Computerized Maintenance Management Systems (CMMS)., • Understanding of mechanical, electrical, pneumatic, and hydraulic systems., • Experience with MRO and spare parts management and BOM development., • Knowledge of EHS and GMP regulations., • Familiarity with Business Intelligence tools (Spotfire, Power BI, Tableau) or AI technology., • Strong verbal, written, and presentation skills; proficiency in Microsoft Office platforms (Excel, Word, PowerPoint)., • Able to travel up to 25% of the time. Preferred: • Bachelor’s or Associate degree in a STEM field or trade certification in instrumentation, mechanical, electrical, or related engineering field., • Life Science experience., • Certified Reliability Leader (CRL) or Certified Maintenance & Reliability Professional (CMRP) certification. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Job Description Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in lasers and precision optics. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Details This Principal Mechanical Engineer must be a highly experienced technical leader responsible for driving innovation and leading the development of advanced mechanical and optical systems, including laser systems, bulk optics, and fiber optic technologies, for aerospace and defense applications. This role oversees all phases of product development—from conceptual design and prototyping through manufacturing and deployment—while ensuring efficient systems integration and high-performance solutions. The position requires deep expertise in opto-mechanical and photonic systems, hands-on experience with fiber-optic technologies and laser systems, and a proven ability to lead cross-functional teams and mentor the next generation of engineers. A key focus is the delivery of cost-effective, cutting-edge solutions designed to operate in demanding environments such as terrestrial and space applications. Responsibilities • Lead the design and development of advanced optical and mechanical systems: Oversee the engineering of large-scale mechanical systems and opto-mechanical subsystems, including bulk optics, laser systems and fiber optic assemblies. Support the design and development of optical support structures, thermal management, and alignment interfaces while packaging delicate optics for demanding military environments for both prototyping and production-level solutions., • Perform and oversee preliminary analysis: Conduct and guide initial structural, thermal, and environmental analyses to validate mechanical and optical system designs. Provide insights to address application challenges, such as heat dissipation in solid-state laser systems, stress management in fiber optic assemblies and secure mounting that can withstand launch into space or operation on ground and airborne platforms. Participate in risk-reduction efforts through breadboards, prototypes, and subscale testing to refine and optimize designs., • Drive innovations in the opto-mechanics of laser systems: Lead the development of innovative opto-mechanics for fiber, diode-pumped solid-state and semiconductor lasers. Deploy the latest thermal management, fiber processing, and optics-mounting techniques and materials to develop innovative solutions., • Manage detailed engineering designs: Support systems engineering in the decomposition of system-level specifications into sub-system and component-level requirements. Develop, review, and release detailed CAD models, part and assembly drawings, and tolerance analyses to support manufacturable and reliable designs. Ensure compliance with GD&T, ASME Y14.5, and other industry design standards for laser systems, bulk optics, and fiber optic assemblies., • Oversee full product lifecycle development: Direct product development activities from concept through production and deployment. Collaborate with optical, mechanical, electrical, and systems engineering teams, ensuring the seamless integration of fiber optics, laser systems, and precision mechanical elements. Lead efforts to meet rigorous environmental and performance requirements in industrial and high-reliability applications., • Collaborate with vendors and manage supply chains: Assist the management of relationships with vendors, including sourcing, qualification, and quality oversight, to ensure the reliable delivery of components for fiber optic and photonic systems. Provide leadership in technology transfer projects, both domestic and international, to establish scalable manufacturing processes and optimize efficiency., • Lead assembly, integration, and testing efforts: Oversee mechanical aspects of product assembly and integration processes, ensuring precise alignment of optical components, fiber handling systems, and laser systems with mechanical designs. Develop tooling, work instructions, and test plans for robust and efficient assembly and system validation. Oversee performance testing on opto-mechanical systems to meet optical, mechanical, and thermal requirements., • Provide technical leadership and mentorship: Serve as a subject-matter expert on the mechanical aspects of laser and fiber optic systems, offering strategic guidance and technical direction to resolve complex engineering challenges. Actively mentor junior engineers and cross-functional team members, fostering technical growth, collaboration, and innovation across the organization. Minimum Qualifications • Education and Work Experience: A Bachelor’s degree in mechanical engineering or a related field, with 10-12 years of relevant experience., • Opto-Mechanical System Design and Integration: Extensive experience in the design, development, and integration of advanced optical, fiber optic, and laser systems, including bulk optics, optical assemblies, and opto-mechanical components for industrial or military applications., • Fiber Optic Product Development: Expertise in fiber optic technologies, including splicing, cleaving, tapering, recoating, and alignment. Proven ability to develop innovative manufacturing processes and systems for fiber handling, in-situ assembly, material curing, and high-precision optics applications., • Mechanical and Thermal Analysis: Proficient in conducting and guiding preliminary structural, thermal, and environmental analyses using FEA and related methods during the design process, with an emphasis on optimizing designs for manufacturability, cost-effectiveness, and system reliability., • CAD Modeling and Design Standards: Extensive experience with CAD tools (SolidWorks is preferred), including high-fidelity part and assembly modeling, detailed drawing creation, tolerance analysis, and adherence to industry standards such as GD&T, ASME Y14.5, MIL specs, and ASTM standards., • Product Lifecycle Management: Strong track record of managing the full product lifecycle—from conceptual design and prototyping to manufacturing, qualification, and deployment—for opto-mechanical and photonic systems in industrial applications., • Systems Engineering and Cross-Functional Collaboration: Demonstrated ability to lead and collaborate with multidisciplinary teams, including optical, electrical, systems, and controls engineers, to deliver integrated solutions for complex engineering challenges., • Innovation in Advanced Photonics & Laser Systems: Experience driving innovation in laser systems, bulk optics, and photonic products while leveraging advanced technologies for applications in industrial R&D and precision manufacturing., • Assembly, Integration, and Validation: Expertise in product assembly, integration, and testing processes, including the development of tooling, manufacturing processes, and detailed test plans. Skilled at conducting performance validation against stringent optical, mechanical, and environmental requirements., • Leadership and Mentorship: Recognized for providing hands-on mentoring and technical leadership to junior engineers and cross-functional teams, fostering a culture of collaboration, innovation, and professional growth. Preferred Qualifications • Education and Work Experience: Master’s degree with 8-10 years experience, or Ph.D. with 7+ years experience)., • [Lean Manufacturing and DFMA: In-depth knowledge of Lean Manufacturing principles, DFMA techniques, and process optimization for high-precision manufacturing, enhancing efficiency and reducing costs., • Vendor Management and Global Technology Transfers: Expertise in sourcing, qualifying, and managing vendors, as well as overseeing cost control, ensuring quality assurance, and leading international technology transfer to enable scalable and cost-efficient manufacturing operations., • Technical Program Management: Proven experience managing technical programs and projects, driving progress on strategic initiatives, aligning cross-functional teams, managing timelines and budgets, and ensuring successful product delivery., • Technical Expertise in Photonics and Optics: Broad understanding and application of photonics, laser systems, fiber optics technologies, and bulk optical systems in high-performance aerospace and defense related R&D environments. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we're headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. What We’re Looking For: We value enthusiasm, curiosity, and a willingness to learn. We welcome candidates with 8-15 years of professional experience who are eager to grow in a supportive environment. What You’ll Do: • Lead design and development of electrical systems for solar and battery storage projects, • Conducting feasibility studies, power system modeling, and electrical calculations, • Creating and reviewing electrical drawings, specifications, and technical documentation, • Analyze designs to ensure compliance with NEC, IEEE, NFPA, and NERC standards, • Stamping engineering drawings., • Providing mentorship and leading teams., • Contributing technical expertise to business development and proposals Must-Haves:, • Bachelor’s in Electrical Engineering (or equivalent) from an accredited institution, • PE Licensure, • Minimum 8 years of experience in Electrical Engineering, • Strong analytical and problem-solving skills, • Proficiency in Microsoft Office (Word, Excel, Outlook), • Passion for renewable energy and sustainability, • Valid U.S. driver’s license and reliable transportation, • Willingness to travel and work flexible hours as needed Nice-to-Haves:, • MS in Electrical Engineering, • Internship or project experience in power systems or renewables, • Involvement in student/professional engineering societies, • Experience with electrical design or consulting Benefits: 401(k) + company match Health, dental, and vision insurance Life insurance Unlimited PTOProfessional development assistance Bonus opportunities Supportive, growth-oriented team environment Why Join ANS? Work on high-impact projects that shape communities and the environment. Be part of a team that values collaboration, mentorship, and professional growth. Gain hands-on field experience while developing technical and project management skills. Enjoy a supportive workplace culture that encourages innovation and creative problem-solving. Take advantage of career development opportunities, including continuing education and industry involvement. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

We are looking for a highly skilled Embedded Software Engineer specializing in ARM based code to join our software team. Review code developed by other engineers and provide feedback to ensure best practices. Bachelor's or Master’s in electrical engineering, or equivalent practical work experience

Job Description Company Description Engineering Driven Design PC provides expert engineering services with a focus on simplifying the engineering process for clients. The company specializes in HVAC, electrical, plumbing, and fire protection engineering services, ensuring minimal client involvement in managing the engineering aspects of construction projects. By leveraging its broad knowledge base, Engineering Driven Design adds significant value to construction projects, emphasizing efficiency and reliability. Position Overview We are seeking a Senior Electrical Engineer with 3–6 years of experience in building systems design who is ready to take technical ownership of projects and play a key role in delivering high-quality, coordinated electrical designs. This position is ideal for an engineer who has progressed beyond basic production work and is comfortable leading electrical design efforts, coordinating directly with other disciplines, and supporting client and contractor communication. This is a full-time, in-office role based in Iselin, NJ. ⸻ Key Responsibilities • Lead the design of power distribution, lighting, and low-voltage systems for commercial, institutional, and industrial projects, • Perform and oversee load calculations, short circuit analysis, equipment selection, and system sizing, • Develop and review single-line diagrams, panel schedules, lighting layouts, and technical specifications, • Ensure compliance with NEC and applicable codes and standards, • Coordinate closely with mechanical, structural, and architectural disciplines, • Identify and resolve design conflicts proactively, • Review and guide junior staff in drawing production and technical accuracy, • Support construction administration efforts including submittals, RFIs, and field coordination, • Communicate effectively with clients, contractors, and utility providers ⸻ Qualifications • Bachelor’s degree in Electrical Engineering (required), • EIT certification required, • PE license preferred or actively pursuing licensure, • 3-6 years of experience with an engineering consulting firm or electrical contractor, • Demonstrated experience leading electrical design on projects from concept through construction, • Strong working knowledge of NEC and applicable building codes ⸻ What Sets You Apart We are looking for an engineer who: • Takes ownership of their projects and stands behind their work, • Thinks beyond minimum compliance toward practical, buildable solutions, • Anticipates coordination issues instead of reacting to them, • Is comfortable making sound technical decisions, • Wants to grow into increased technical authority and long-term leadership within the firm ⸻ Technical Requirements • AutoCAD proficiency (required), • Revit experience (strongly preferred), • Experience with power system analysis software is a plus ⸻ Growth Opportunity This role provides the opportunity to expand technical leadership, mentor junior team members, and increase involvement in client coordination and project delivery strategy over time.