Flight jobs in San Diego, CaliforniaCreate job alerts

Job Description About Bartell Hotels: Bartell Hotels is San Diego's largest independent hotel owner-operator with a sharp focus on employees, customers and community. This diverse collection of properties reflects Southern California's natural beauty, love for active lifestyles and exceptional hospitality. Our hotels combine classic and modern design, farm-to-table restaurants and energized bars, three beautiful marinas and the iconic Humphreys Concerts by the Bay entertainment venue. Our Culture: At Bartell Hotels you will find a team of incredibly friendly people who are committed to exceeding guest expectations every day. The Bartell Hotels culture emphasizes respect, pride, teamwork and development. When you work at Bartell Hotels, you are encouraged to think entrepreneurially, and you are empowered to perform and show leadership in ways that can help advance your career. We often look within to promote deserving colleagues at all levels. Bartell Hotels embraces colleague diversity, inclusion and equity, and is firmly committed to respecting and appreciating each colleague. Bartell Hotels is an equal opportunity employer. Primary Objective of Guest Service Agent Position To provide prompt, effective, friendly guest service for customers and hotel staff by operating hotel inventory in accordance with the standards of Bartell Hotels Responsibilities • Provides courteous and efficient service to customers by operating the front desk according to Bartell Hotels standards, • Understands room types and rates, • Proficient in manipulating the hotel room inventory to meet and exceed customer expectations without loss to hotel, • Understands the “10 foot rule”, • Owns a problem when confronted with one, • Handles difficult situations effectively, • Understands the importance of group codes, guest types, and source codes, • Communicates clearly and courteously with other staff members and guests, • Demonstrates proficiency in the use of equipment (inc. faxes, phones, etc.), • Responds to customer questions regarding hotel, in-house facilities, and local events, • Provides courteous, prompt, and accurate inter-hotel communications to staff and customers, • Takes accurate and complete messages, • Correctly places room on priority status with housekeeping, • Communicates with authorized personnel by using Phones, HotSos and/or radios, • Follows established hotel security and safety policies as required, • Prepares reports as requested which may include bucket checks, dupe checks, credit limits, room discrepancies and In-house notes Other duties may be assigned as needed Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl, as well as frequently lifting and/or moving up to 50 pounds. The employee must also be able to go up and down a flight of stairs while carrying 25 pounds. The employee is sometimes exposed to outside weather conditions and the noise level in the work environment is usually moderate to loud.

Job Description About Bartell Hotels: Bartell Hotels is San Diego's largest independent hotel owner-operator with a sharp focus on employees, customers and community. This diverse collection of properties reflects Southern California's natural beauty, love for active lifestyles and exceptional hospitality. Our hotels combine classic and modern design, farm-to-table restaurants and energized bars, three beautiful marinas and the iconic Humphreys Concerts by the Bay entertainment venue. Our Culture: At Bartell Hotels you will find a team of incredibly friendly people who are committed to exceeding guest expectations every day. The Bartell Hotels culture emphasizes respect, pride, teamwork and development. When you work at Bartell Hotels, you are encouraged to think entrepreneurially, and you are empowered to perform and show leadership in ways that can help advance your career. We often look within to promote deserving colleagues at all levels. Bartell Hotels embraces colleague diversity, inclusion and equity, and is firmly committed to respecting and appreciating each colleague. Bartell Hotels is an equal opportunity employer. Primary Objective of Guest Service Agent Position To provide prompt, effective, friendly guest service for customers and hotel staff by operating hotel inventory in accordance with the standards of Bartell Hotels Responsibilities • Provides courteous and efficient service to customers by operating the front desk according to Bartell Hotels standards, • Understands room types and rates, • Proficient in manipulating the hotel room inventory to meet and exceed customer expectations without loss to hotel, • Understands the “10 foot rule”, • Owns a problem when confronted with one, • Handles difficult situations effectively, • Understands the importance of group codes, guest types, and source codes, • Communicates clearly and courteously with other staff members and guests, • Demonstrates proficiency in the use of equipment (inc. faxes, phones, etc.), • Responds to customer questions regarding hotel, in-house facilities, and local events, • Provides courteous, prompt, and accurate inter-hotel communications to staff and customers, • Takes accurate and complete messages, • Correctly places room on priority status with housekeeping, • Communicates with authorized personnel by using Phones, HotSos and/or radios, • Follows established hotel security and safety policies as required, • Prepares reports as requested which may include bucket checks, dupe checks, credit limits, room discrepancies and In-house notes Other duties may be assigned as needed Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl, as well as frequently lifting and/or moving up to 50 pounds. The employee must also be able to go up and down a flight of stairs while carrying 25 pounds. The employee is sometimes exposed to outside weather conditions and the noise level in the work environment is usually moderate to loud.

Job Description About Bartell Hotels: Bartell Hotels is San Diego's largest independent hotel owner-operator with a sharp focus on employees, customers and community. This diverse collection of properties reflects Southern California's natural beauty, love for active lifestyles and exceptional hospitality. Our hotels combine classic and modern design, farm-to-table restaurants and energized bars, three beautiful marinas and the iconic Humphreys Concerts by the Bay entertainment venue. Our Culture: At Bartell Hotels you will find a team of incredibly friendly people who are committed to exceeding guest expectations every day. The Bartell Hotels culture emphasizes respect, pride, teamwork and development. When you work at Bartell Hotels, you are encouraged to think entrepreneurially, and you are empowered to perform and show leadership in ways that can help advance your career. We often look within to promote deserving colleagues at all levels. Bartell Hotels embraces colleague diversity, inclusion and equity, and is firmly committed to respecting and appreciating each colleague. Bartell Hotels is an equal opportunity employer. Primary Objective of Dining Room Server Position To provide quality service to hotel restaurant guests by providing prompt, courteous and knowledgeable food and beverage service. Responsibilities • Takes the initiative to greet guests in a friendly and warm manner., • Reviews menu with diners, suggesting dinner courses, appropriate wines, and answering questions regarding food and cocktail preparations., • Enters orders accurately in POS and serves courses from kitchen and service bars., • Garnishes and decorates dishes preparatory to serving., • Observes diners to fulfill any additional request and to perceive when meal has been completed., • Presents bill and processes payment, • Replenishes supplies and prepares for the next meal. Other duties as assigned Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl and must frequently lift and/or move up to 25 pounds. The employee must also be able to go up and down a flight of stairs while carrying up to 25 pounds. The employee may be frequently exposed to outside weather conditions. The noise is usually moderate to loud.

Job Description About Bartell Hotels: Bartell Hotels is San Diego's largest independent hotel owner-operator with a sharp focus on employees, customers and community. This diverse collection of properties reflects Southern California's natural beauty, love for active lifestyles and exceptional hospitality. Our hotels combine classic and modern design, farm-to-table restaurants and energized bars, three beautiful marinas and the iconic Humphreys Concerts by the Bay entertainment venue. Our Culture: At Bartell Hotels you will find a team of incredibly friendly people who are committed to exceeding guest expectations every day. The Bartell Hotels culture emphasizes respect, pride, teamwork and development. When you work at Bartell Hotels, you are encouraged to think entrepreneurially, and you are empowered to perform and show leadership in ways that can help advance your career. We often look within to promote deserving colleagues at all levels. Bartell Hotels embraces colleague diversity, inclusion and equity, and is firmly committed to respecting and appreciating each colleague. Bartell Hotels is an equal opportunity employer. Primary Objective of Dining Room Server Position To provide quality service to hotel restaurant guests by providing prompt, courteous and knowledgeable food and beverage service. Responsibilities • Takes the initiative to greet guests in a friendly and warm manner., • Reviews menu with diners, suggesting dinner courses, appropriate wines, and answering questions regarding food and cocktail preparations., • Enters orders accurately in POS and serves courses from kitchen and service bars., • Garnishes and decorates dishes preparatory to serving., • Observes diners to fulfill any additional request and to perceive when meal has been completed., • Presents bill and processes payment, • Replenishes supplies and prepares for the next meal. Other duties as assigned Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl and must frequently lift and/or move up to 25 pounds. The employee must also be able to go up and down a flight of stairs while carrying up to 25 pounds. The employee may be frequently exposed to outside weather conditions. The noise is usually moderate to loud.

Job DescriptionJob Title: Manufacturing Technician Job Description As a Manufacturing Technician, you will build, inspect, and support the integration of UAV systems that operate in real-world environments. You will assemble flight-critical structures, propulsion systems, and subsystems using precise methods and tooling while working closely with engineers and other technicians to ensure each vehicle meets rigorous mechanical and performance standards. Your work will span the full production lifecycle, from part preparation and alignment through final assembly and checkout. This is a hands-on, technical role where attention to detail, discipline, and accountability are essential, and the hardware you build will directly impact tactical readiness and mission success. Responsibilities • Assemble UAV components, mechanical subsystems, and structural assemblies according to detailed specifications and work instructions., • Ensure proper alignment, torque, and fastening of mechanical and structural components to meet quality and performance standards., • Interpret and follow engineering drawings, exploded views, wiring diagrams, and written build documentation accurately., • Perform functional and mechanical checks on assemblies to verify form, fit, and basic performance., • Assist with part preparation tasks, including deburring, hand trimming, polishing, and post-cleaning., • Support additive manufacturing operations, including post-processing, racking, unloading, and material handling., • Conduct basic mechanical and electrical integration, such as installing servos, sensors, harnesses, and avionics., • Operate shop equipment such as drill presses, band saws, air tools, and torque drivers safely and effectively., • Assist with shop floor logistics, including staging kits, moving materials, and supporting shipping and receiving activities., • Perform light preventative maintenance tasks such as coolant checks, electronic rework, and filter swaps., • Maintain detailed build records, logs, and checklists for assemblies and tasks to ensure traceability and quality documentation., • Promptly identify, document, and communicate issues or discrepancies to the appropriate engineering or supervisory team members., • Collaborate across teams to support iterative prototyping, teardowns, and rework cycles., • Uphold 5S, foreign object debris (FOD) control, electrostatic discharge (ESD) control, and daily shop cleanliness protocols., • Adhere strictly to all safety procedures and immediately report potential hazards or unsafe conditions., • Perform other tasks as directed, including general facility support or non-production duties as needed.Essential Skills, • 2+ years of hands-on experience in mechanical assembly, UAV systems, aerospace, automotive, machining, or a related technical field., • Strong mechanical aptitude with the ability to follow detailed work instructions and engineering drawings., • Proficiency with hand tools, power tools, precision instruments, and shop equipment., • Ability to inspect components visually and dimensionally to ensure compliance with specifications., • High attention to detail, strong organizational skills, and the ability to maintain clear and accurate documentation of work performed., • Self-directed approach with comfort working in a fast-paced, cross-functional environment., • Strong communication skills and a high level of accountability in team-based settings., • Ability to lift up to 75 pounds and stand for extended periods in a hands-on production environment., • U.S. citizenship.Additional Skills & Qualifications, • Previous experience with drones, UAVs, experimental aircraft, or aerospace vehicle integration., • Familiarity with aerospace assembly methods, including riveting, mechanical fasteners, nut plates, bonding, and sealing., • Exposure to additive manufacturing or CNC machining workflows., • Experience conducting basic mechanical and electrical functional checks., • Skill in using calipers, height gauges, torque tools, and other inspection equipment., • Experience working in a prototyping or low-rate production environment., • Comfort with flexible schedules, second shifts, or occasional weekend work.Why Work Here? You will contribute directly to the build of advanced UAV systems that operate in real-world missions, giving your work clear purpose and impact. The environment emphasizes hands-on engineering, collaboration with cross-functional teams, and exposure to cutting-edge manufacturing methods such as additive manufacturing and precision assembly. You will gain experience across the full production lifecycle, from prototype to final integration, in a setting that values accountability, craftsmanship, and continuous improvement. The culture supports learning by doing, open communication, and shared ownership of quality and safety. Work Environment This role is based on-site at a manufacturing-focused headquarters in San Diego, CA, and requires daily presence on the shop floor; remote work is not applicable. You will work in a hands-on production environment with regular use of power tools, precision equipment, and machinery. The role involves standing for extended periods, lifting 50–75 pounds, and working around metal powders, high-temperature components, and 3D printing equipment. You will follow established 5S, FOD, and ESD protocols and use provided personal protective equipment (PPE) as required to ensure a safe and orderly workspace. Attire is appropriate for a shop-floor environment and must accommodate the use of PPE. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Jul 29, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description About the Role: The Concert Beverage Server plays a vital role in delivering an exceptional guest experience at Humphreys Concerts by the Bay by efficiently serving beverages in a fast-paced environment. This position requires attentiveness to customer needs, ensuring timely and accurate service while maintaining compliance with all safety and alcohol service regulations. The server will interact directly with concert attendees, providing friendly and professional service that enhances the overall event atmosphere. Additionally, the role involves handling electronic payments, and maintaining cleanliness and organization of the service area. Ultimately, the Concert Beverage Server contributes to the success of the event by promoting a safe, enjoyable, and memorable experience for all guests. Minimum Qualifications: • Must be at least 21 years of age to serve alcoholic beverages., • Previous experience in beverage service or hospitality is preferred, • Ability to stand and walk for extended periods during events., • Strong communication and interpersonal skills., • Basic math skills for handling transactions. Preferred Qualifications: • Certification in responsible alcohol service (e.g., TIPS, ServSafe Alcohol)., • Experience working in a fast-paced event or concert environment., • Ability to work flexible hours, including nights, weekends, and holidays, • Physical stamina to carry trays and lift beverage cases. Responsibilities: • Serve alcoholic and non-alcoholic beverages to concert attendees in accordance with venue policies and legal requirements., • Engage with customers in a courteous and professional manner, addressing questions and ensuring satisfaction., • Check identification to verify legal drinking age and refuse service to underage or intoxicated individuals., • Handle electronic payments accurately, providing correct receipts as needed., • Maintain cleanliness and organization of the beverage service area, including restocking supplies and disposing of waste properly., • Collaborate with team members and management to ensure smooth operation during events., • Adhere to all health, safety, and alcohol service regulations and guidelines. Skills: The required skills such as strong communication and interpersonal abilities are essential for engaging with guests and providing excellent customer service throughout the event. Basic math skills are used daily to accurately process payments. Attention to detail and adherence to safety regulations ensure responsible alcohol service and compliance with legal standards. Preferred skills like certification in alcohol service enhance the server's ability to handle challenging situations professionally and responsibly. Physical stamina and the ability to work in a fast-paced environment enable the server to maintain high energy and efficiency during busy concert periods. Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl, as well as frequently lifting and/or moving up to 25 pounds. The employee must also be able to go up and down a flight of stairs while carrying 25 pounds. The employee is sometimes exposed to outside weather conditions and the noise level in the work environment is usually moderate to loud

Job Description About Bartell Hotels: Bartell Hotels is San Diego's largest independent hotel owner-operator with a sharp focus on employees, customers and community. This diverse collection of properties reflects Southern California's natural beauty, love for active lifestyles and exceptional hospitality. Our hotels combine classic and modern design, farm-to-table restaurants and energized bars, three beautiful marinas and the iconic Humphreys Concerts by the Bay entertainment venue. Our Culture: At Bartell Hotels you will find a team of incredibly friendly people who are committed to exceeding guest expectations every day. The Bartell Hotels culture emphasizes respect, pride, teamwork and development. When you work at Bartell Hotels, you are encouraged to think entrepreneurially, and you are empowered to perform and show leadership in ways that can help advance your career. We often look within to promote deserving colleagues at all levels. Bartell Hotels embraces colleague diversity, inclusion and equity, and is firmly committed to respecting and appreciating each colleague. Bartell Hotels is an equal opportunity employer. Primary Objective of Host/Hostess Position The primary objective of the host/hostess is to deliver an excellent first and last impression to all guests and to provide accurate information over the phone and in person in a friendly and efficient manner. Responsibilities • Greet all guest in a pleasant and attentive manner, • Work with customers to exceed expectations and answer all questions, • Answer phones promptly and be knowledgeable on all current activities of the restaurant and bar, • Accountable for controlling the smooth and steady flow of customers in the restaurant., • Maintain awareness of reservations, mapping out the floor plan being mindful of seating rotations, • Present menus and inform guests who their server will be, • Keep track of the customer counts and table seating times, • Make sure servers are aware that they have a new table and make sure they are ready, • Let a manager know if there is a need for a wait or table touch, • Maintain familiarity of the menu to be able to answer questions of waiting guest and phone calls, as well as being able to take to go orders as needed, • Acquires a working knowledge of hotel, in-house facilities, and local information to respond to customer questions in these areas as required Other duties may be assigned as needed Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl and must frequently lift and/or move up to 25 pounds. The employee must also be able to go up and down a flight of stairs. The employee may be frequently exposed to outside weather conditions. The noise is usually moderate to loud.

Job Description C2 Group is seeking 14 CFR Part 107 Remote Pilots with experience supporting Electrical Distribution inspection operations. This role requires a professional approach to flight discipline, strong judgment in dynamic environments, and the ability to operate safely around energized distribution assets. Utility inspection experience in California is preferred. What You Will Do: Distribution Pilots support critical inspection efforts that help prevent infrastructure failures and reduce wildfire risk across utility service territories. Operations are performed using multiple UAS platforms, sensor systems in both urban and rural environments. The ideal candidate is comfortable working as part of a small crew, adapting to changing field conditions, and maintaining high data-quality standards. This position is based in Southern California and requires ongoing field deployment throughout the project duration. Responsibilities include: • Conducting pre-flight, flight, and post-flight duties as RPIC, • Inspecting electrical distribution poles, equipment, • Operating safely in live-wire distribution environments, • Supporting flexible crewing models through cross-training, • Participating in safety tailboards and daily operational briefings Required Skills and Experience: • Minimum 50 flight hours conducting UAS operations in live electrical environments, • Familiarity with General Aviation Rules, • Strong communication skills in fast-moving field environments, • Ability to crouch, stoop, lean, and lift 25–50+ lbs at least 20% of the time, • Ability to travel and deploy in California for extended periods (up to 6 months) Required Certifications: • FAA Part 107 Remote Pilot Certificate, • Pilot currency documentation (if applicable) Desired Experience: • Distribution-level utility inspections, • Multirotor flight experience, • Safety tailboard planning and execution, • Data Quality Control processes, • Engineering or 3D modeling exposure, • Emergency response or disaster-relief operations

Job Description- Experience on maintaining King Air 200/350/1900, Falcon 50/900/200 or Challenger 350 a plus. Responsible for servicing, troubleshooting, repairing and modifying aircraft systems to ensure continued airworthiness. These tasks are performed on avionics & electrical systems, engines, flight controls and airframe components. • Reads and interprets manufacturers maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components., • Ensure aircraft discrepancies are properly recorded in accordance with approved maintenance procedures. Know and understand the functions and requirements of computerized maintenance software. Maintain a clean and organized work place., • Perform other duties as assigned by Management, • Required to provide own hand tools., • Reports To: Shop Supervisor., • Possesses a valid FAA Aircraft & Powerplant (A&P) license and shows compliance with FAR 65.83, recent experience requirements, • Reliable, self-motivated, and able to deal with stressful situations and timelines while maintaining professional and non-confrontational attitude, • Experience & Education: High School degree or equivalent required., • Three to Five years experience on maintaining King Air 200/350/1900, Falcon 50/900/200 or Challenger 350 preferred., • Physical Requirements/Working Environment: Must possess a valid driver’s license. Be physically able to perform aircraft mechanic duties. Stand, squat, sit, walk, work with arms overhead for extended periods of time. Pull, push, lift up to 50 lbs. Job Type: Full-time Salary: $30.00 - $38.00 per hour (depends on experience) Benefits: • Dental insurance, • Health insurance, • Paid time off, • Vision insuranceSchedule:, • 8 hour shift, • Day shift, • Monday to Friday, • OvertimeEducation:, • High school or equivalent (Preferred)

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking an Aerostructures Design Engineer II to support the development of structural components for our next-generation autonomous aircraft. As a key contributor on the Mechanical Engineering team, you will design and develop high-performance structural components from concept through production release. You’ll work cross-functionally to ensure structural integrity, manufacturability, and system integration across one of the most advanced autonomous aircraft platforms being built today. This role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. What you'll do: • Design and develop structural components and assemblies for Shield AI’s next-generation UAV platform, supporting both primary and secondary aircraft structures., • Execute all stages of the design lifecycle including conceptual development, initial CAD modeling, detailed design, and drawing release., • Perform hand calculations for stress or strain with limited basic FEA analysis, with guidance from senior engineers as needed., • Collaborate closely with aerodynamics, propulsion, avionics, payload, and manufacturing teams to support system integration across airframe interfaces., • Support structural validation efforts including coupon testing, subcomponent testing, and system-level verification., • Generate high-quality design documentation, drawings, interface definitions, and analysis reports in compliance with aerospace standards., • Partner with manufacturing and flight test teams to resolve build issues and support hardware through test and deployment., • Participate in design reviews and technical discussions, presenting work clearly and incorporating feedback effectively., • Continuously improve personal technical depth in structural layout, joints, fasteners, tolerancing, and structural optimization.Required qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or related discipline., • 2+ years of experience in aircraft structural design or closely related aerospace structures., • Experience designing and releasing structural components in development or production environments., • Working knowledge of composite and metallic structures, including fasteners, bonded joints, and load paths., • Proficiency in CAD tools (NX, CATIA, SolidWorks, or similar)., • Understanding of GD&T, tolerance stackups, and DFMA principles., • Strong written and verbal technical communication skills., • Demonstrated ability to operate in fast-paced, high-ownership engineering environments, • Ability to get a S//SAR level security clearance desiredPreferred qualifications:, • M.S. degree in Aerospace or Mechanical Engineering., • Experience supporting UAV, DoD, or aerospace vehicle programs., • Familiarity with aerospace standards (MIL-STD, ASME Y14.5, FAA)., • Experience supporting hardware through test, failure analysis, and design iteration., • Exposure to composite design and manufacturing methods., • Experience using FEA tools (ANSYS, Abaqus, NASTRAN, or similar) for linear structural analysis#LI-MS1#LB Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI's Software Test & Automation Team is responsible for developing the verification, validation, and automation capabilities that enable rapid delivery of Hivemind autonomy across the Expeditionary and Emerging Operations portfolio. The team provides objective evidence of software quality, reliability, and mission readiness by developing scalable automation frameworks, repeatable validation environments, and software readiness assessments spanning Software-in-the-Loop (SIL), Hardware-in-the-Loop (HIL), Vehicle-in-the-Loop (VIL), and operational test environments. As the Software Test & Automation Manager, you will lead a multidisciplinary engineering team responsible for defining verification strategies, building automated validation capabilities, and establishing software readiness standards across a diverse portfolio that includes XBAT, VBAT, Weapons, Space, Maritime, and other emerging autonomy programs. You will partner closely with software engineering, systems engineering, platform integration, digital infrastructure, and flight test organizations to ensure autonomy capabilities are thoroughly validated and ready for operational deployment. This role is ideal for a technical leader who enjoys building high-performing engineering teams, developing scalable automation strategies, and improving software quality through modern verification and continuous validation practices. What you'll do: • Lead and grow a team of Software Test & Automation Engineers supporting Expeditionary and Emerging Operations., • Define verification and validation strategies spanning simulation, SIL, HIL, VIL, and operational test environments., • Drive the development of automated regression testing, validation frameworks, and test infrastructure that improve software quality and engineering velocity., • Establish software readiness criteria, quality gates, and objective performance metrics used to assess autonomy maturity throughout the development lifecycle., • Partner with Digital Infrastructure to integrate automated validation into CI/CD pipelines and expand continuous testing capabilities., • Develop common automation frameworks, reusable test assets, and validation methodologies across multiple autonomy programs., • Coordinate software readiness activities with software engineering, systems engineering, platform integration, and flight test teams., • Develop technical roadmaps, staffing plans, and engineering priorities aligned with organizational objectives., • Mentor engineers, conduct performance reviews, recruit top talent, and foster technical excellence across the organization., • Present software readiness assessments, technical risks, and validation status to program leadership, Chief Engineers, and executive stakeholders. Required qualifications:, • Lead and grow a team of Software Test & Automation Engineers supporting Expeditionary and Emerging Operations., • Define verification and validation strategies spanning simulation, SIL, HIL, VIL, and operational test environments., • Drive the development of automated regression testing, validation frameworks, and test infrastructure that improve software quality and engineering velocity., • Establish software readiness criteria, quality gates, and objective performance metrics used to assess autonomy maturity throughout the development lifecycle., • Partner with Digital Infrastructure to integrate automated validation into CI/CD pipelines and expand continuous testing capabilities., • Develop common automation frameworks, reusable test assets, and validation methodologies across multiple autonomy programs., • Coordinate software readiness activities with software engineering, systems engineering, platform integration, and flight test teams., • Develop technical roadmaps, staffing plans, and engineering priorities aligned with organizational objectives., • Mentor engineers, conduct performance reviews, recruit top talent, and foster technical excellence across the organization., • Present software readiness assessments, technical risks, and validation status to program leadership, Chief Engineers, and executive stakeholders. Preferred qualifications:, • Experience supporting autonomous systems, robotics, or unmanned platforms., • Experience with software quality tools such as SonarQube., • Experience with ROS., • Experience developing software readiness metrics, dashboards, and executive reporting., • Experience supporting DoD programs and customer demonstrations. #LI-LD1#LD Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking an Aerostructures Design Engineer II to support the development of structural components for our next-generation autonomous aircraft. As a key contributor on the Mechanical Engineering team, you will design and develop high-performance structural components from concept through production release. You’ll work cross-functionally to ensure structural integrity, manufacturability, and system integration across one of the most advanced autonomous aircraft platforms being built today. This role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. What you'll do: • Design and develop structural components and assemblies for Shield AI’s next-generation UAV platform, supporting both primary and secondary aircraft structures., • Execute all stages of the design lifecycle including conceptual development, initial CAD modeling, detailed design, and drawing release., • Perform hand calculations for stress or strain with limited basic FEA analysis, with guidance from senior engineers as needed., • Collaborate closely with aerodynamics, propulsion, avionics, payload, and manufacturing teams to support system integration across airframe interfaces., • Support structural validation efforts including coupon testing, subcomponent testing, and system-level verification., • Generate high-quality design documentation, drawings, interface definitions, and analysis reports in compliance with aerospace standards., • Partner with manufacturing and flight test teams to resolve build issues and support hardware through test and deployment., • Participate in design reviews and technical discussions, presenting work clearly and incorporating feedback effectively., • Continuously improve personal technical depth in structural layout, joints, fasteners, tolerancing, and structural optimization.Required qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or related discipline., • 2+ years of experience in aircraft structural design or closely related aerospace structures., • Experience designing and releasing structural components in development or production environments., • Working knowledge of composite and metallic structures, including fasteners, bonded joints, and load paths., • Proficiency in CAD tools (NX, CATIA, SolidWorks, or similar)., • Understanding of GD&T, tolerance stackups, and DFMA principles., • Strong written and verbal technical communication skills., • Demonstrated ability to operate in fast-paced, high-ownership engineering environments, • Ability to get a S//SAR level security clearance desiredPreferred qualifications:, • M.S. degree in Aerospace or Mechanical Engineering., • Experience supporting UAV, DoD, or aerospace vehicle programs., • Familiarity with aerospace standards (MIL-STD, ASME Y14.5, FAA)., • Experience supporting hardware through test, failure analysis, and design iteration., • Exposure to composite design and manufacturing methods., • Experience using FEA tools (ANSYS, Abaqus, NASTRAN, or similar) for linear structural analysis#LI-MS1#LB Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description This position is located at our San Diego Flight Training Center Located 3794 John J Montgomery Dr, San Diego, CA 92123 SUMMARY: The A&P Mechanic is responsible for repairs and perform scheduled maintenance on aircrafts. The A&P Mechanic must uphold the philosophy and mission of the University while instilling positive and progressive attitude in all employees. JOB REQUIREMENTS include but are not limited to the following: COMPLIANCE: • Responsible for compliance with all local, state, accreditation and federal regulations, • Ensure completeness, accuracy, and security of campus files, documents and reports., • Ensure and maintain compliance with all company policies and procedures, • Responsible for complete and accurate timekeeping. ESSENTIAL DUTIES: • Conduct all duties and responsibilities ethically and professionally;, • Diagnose mechanical or electrical problems., • Repair wings, brakes, electrical systems, and other aircraft components., • Replace defective parts, using hand tools or power tools., • Examine replacement aircraft parts for defects., • Read maintenance manuals to identify repair procedures., • Test aircraft parts with diagnostic equipment., • Inspect completed work to ensure that it meets performance standards., • Keep records of maintenance and repair work., • Clean shop as required., • Work on weekends when required., • Be willing to travel on short notice., • Other duties as assigned. QUALIFICATIONS AND REQUIREMENTS: To perform this job successfully, an individual must be able to carry out each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential duties. EDUCATION AND/OR EXPERIENCE: A&P certification requires. One plus years’ experience and/ or training; or equivalent combination of education and experience. OTHER SKILLS and ABILITIES: Ability to interact in a pleasant and professional manner with all types of people. Ability to work well under pressure, manage multiple priorities, set and meet deadlines and manage unexpected situations. Strong technology skills necessary. TRAVEL DEMANDS: Travel to various conferences and/or trainings may require overnight stays, and the number of nights is dictated by company and/or by the schedule of events. The employee must have the ability to travel to various locations as necessary. Must have vehicle suitable to safe and secure transportation. LANGUAGE SKILLS: Ability to read, analyze, and interpret business communications, financial reports, legal documents, and some government reports. Ability to respond to common inquiries or complaints from students, regulatory agencies, or members of the business community. Ability to write correspondence. Ability to effectively present information to students, top management and/or public groups. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of instructions and deal with several abstract and concrete variables. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. While performing the duties of this job, the employee is regularly required to converse and listen. The employee frequently is required to sit and use hands to finger a computer keyboard, and handle the telephone. The employee is required to stand, walk, and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. The noise level in the work environment is usually moderate.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Senior Structural Design Engineer to support the development of structural components for our next-generation autonomous aircraft. As a key contributor on the Mechanical Engineering team, you will design and develop high-performance structural components from concept through production release. You’ll work cross-functionally to ensure structural integrity, manufacturability, and system integration across one of the most advanced autonomous aircraft platforms being built today. This role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. What you'll do: • Design and develop structural components and assemblies for Shield AI’s next-generation UAV platform, supporting both primary and secondary aircraft structures., • Execute all stages of the design lifecycle including conceptual development, initial CAD modeling, detailed design, and drawing release., • Perform hand calculations for stress or strain with limited basic FEA analysis, with guidance from senior engineers as needed., • Collaborate closely with aerodynamics, propulsion, avionics, payload, and manufacturing teams to support system integration across airframe interfaces., • Support structural validation efforts including coupon testing, subcomponent testing, and system-level verification., • Generate high-quality design documentation, drawings, interface definitions, and analysis reports in compliance with aerospace standards., • Partner with manufacturing and flight test teams to resolve build issues and support hardware through test and deployment., • Participate in design reviews and technical discussions, presenting work clearly and incorporating feedback effectively., • Continuously improve personal technical depth in structural layout, joints, fasteners, tolerancing, and structural optimization.Required qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or related discipline., • 4–5+ years of experience in aircraft structural design or closely related aerospace structures., • Experience designing and releasing structural components in development or production environments., • Working knowledge of composite and metallic structures, including fasteners, bonded joints, and load paths., • Proficiency in CAD tools (NX, CATIA, SolidWorks, or similar)., • Understanding of GD&T, tolerance stackups, and DFMA principles., • Strong written and verbal technical communication skills., • Demonstrated ability to operate in fast-paced, high-ownership engineering environmentsPreferred qualifications:, • M.S. degree in Aerospace or Mechanical Engineering., • Experience supporting UAV, DoD, or aerospace vehicle programs., • Familiarity with aerospace standards (MIL-STD, ASME Y14.5, FAA)., • Experience supporting hardware through test, failure analysis, and design iteration., • Exposure to composite design and manufacturing methods., • Experience using FEA tools (ANSYS, Abaqus, NASTRAN, or similar) for linear structural analysis#LI-MS#LC Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description About Bartell Hotels: Bartell Hotels is San Diego's largest independent hotel owner-operator with a sharp focus on employees, customers and community. This diverse collection of properties reflects Southern California's natural beauty, love for active lifestyles and exceptional hospitality. Our hotels combine classic and modern design, farm-to-table restaurants and energized bars, three beautiful marinas and the iconic Humphreys Concerts by the Bay entertainment venue. Our Culture: At Bartell Hotels you will find a team of incredibly friendly people who are committed to exceeding guest expectations every day. The Bartell Hotels culture emphasizes respect, pride, teamwork and development. When you work at Bartell Hotels, you are encouraged to think entrepreneurially, and you are empowered to perform and show leadership in ways that can help advance your career. We often look within to promote deserving colleagues at all levels. Bartell Hotels embraces colleague diversity, inclusion and equity, and is firmly committed to respecting and appreciating each colleague. Bartell Hotels is an equal opportunity employer. Primary Objective of Houseperson Position To contribute to an attractive and clean hotel in accordance with the standards of Bartell Hotels by providing public space cleaning of customer floors, hallways, service areas and outside grounds. Assist Room Attendants with all supplies necessary for smooth operation of department Responsibilities • Maintains the overall cleanliness of the hotel's public space by cleaning all assigned areas thoroughly on a daily basis, • Cleans public areas including; floors, carpets, restrooms, lobbies, hallways, vending areas, service areas, stairwells, fitness center, grounds and any other areas needed for cleaning, • Cleans and polishes floors, windows, mirrors, vending machines, and ice machines, • Vacuums, shampoos, and removes gum spots from carpets as required, • Removes all litter from public space, • Dusts all spots thoroughly, • Distributes linen and supplies to Room Attendants and performs other cleaning duties as required, • Prevents any damage to hotel property by exercising proper caution with chemicals, • Maximizes job efficiency and neat, orderly appearance by maintaining well-stocked and clean supply cart and linen closet, • Maintains vacuum cleaner by replacing and/or emptying bag daily, cleaning and placing according to S.O.P.'s, • Insures the rapid maintenance and repair of hotel equipment by reporting all maintenance requests in a timely and efficient manner, • Completes work projects as assigned by supervisor and management, • Minimizes safety hazards by following all safety rules and procedures, • Keeps immediate supervisor promptly and fully informed of all problems or unusual matters of significance Other duties may be assigned as needed Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl, as well as frequently lifting and/or moving up to 75 pounds. The employee must also be able to go up and down a flight of stairs while carrying 75 pounds. The employee is sometimes exposed to outside weather conditions and the noise level in the work environment is usually moderate.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking an Aerostructures Design Engineer II to support the development of structural components for our next-generation autonomous aircraft. As a key contributor on the Mechanical Engineering team, you will design and develop high-performance structural components from concept through production release. You’ll work cross-functionally to ensure structural integrity, manufacturability, and system integration across one of the most advanced autonomous aircraft platforms being built today. This role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. What you'll do: • Design and develop structural components and assemblies for Shield AI’s next-generation UAV platform, supporting both primary and secondary aircraft structures., • Execute all stages of the design lifecycle including conceptual development, initial CAD modeling, detailed design, and drawing release., • Perform hand calculations for stress or strain with limited basic FEA analysis, with guidance from senior engineers as needed., • Collaborate closely with aerodynamics, propulsion, avionics, payload, and manufacturing teams to support system integration across airframe interfaces., • Support structural validation efforts including coupon testing, subcomponent testing, and system-level verification., • Generate high-quality design documentation, drawings, interface definitions, and analysis reports in compliance with aerospace standards., • Partner with manufacturing and flight test teams to resolve build issues and support hardware through test and deployment., • Participate in design reviews and technical discussions, presenting work clearly and incorporating feedback effectively., • Continuously improve personal technical depth in structural layout, joints, fasteners, tolerancing, and structural optimization.Required qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or related discipline., • 2+ years of experience in aircraft structural design or closely related aerospace structures., • Experience designing and releasing structural components in development or production environments., • Working knowledge of composite and metallic structures, including fasteners, bonded joints, and load paths., • Proficiency in CAD tools (NX, CATIA, SolidWorks, or similar)., • Understanding of GD&T, tolerance stackups, and DFMA principles., • Strong written and verbal technical communication skills., • Demonstrated ability to operate in fast-paced, high-ownership engineering environments, • Ability to get a S//SAR level security clearance desiredPreferred qualifications:, • M.S. degree in Aerospace or Mechanical Engineering., • Experience supporting UAV, DoD, or aerospace vehicle programs., • Familiarity with aerospace standards (MIL-STD, ASME Y14.5, FAA)., • Experience supporting hardware through test, failure analysis, and design iteration., • Exposure to composite design and manufacturing methods., • Experience using FEA tools (ANSYS, Abaqus, NASTRAN, or similar) for linear structural analysis#LI-MS1#LB Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description About CAMP Systems: At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry. With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts suppliers worldwide, we’re shaping the future of aviation technology. Since our founding in 1968, we’ve grown to a dynamic team of 1,600+ employees across 14 locations globally—all united by a passion for innovation and excellence. Our Mission & Vision: We connect the aviation industry through smart technology to make flight safer and more efficient, driving the future of aviation with intelligence and exceptional customer experiences. Our Values & Excellence Mindset: We are customer obsessed, trust-driven, owners of our work, stronger together, constantly curious, and boldly innovative. What You Will Experience In This Role: Are you a highly motivated professional with a passion for building customer relationships and driving business growth? CAMP Aviate is looking for an Account Manager to grow and expand our customer partnerships across the aviation industry. In this role, you will develop a deep understanding of customer business objectives, industry challenges, and operational needs while helping clients maximize the value of CAMP Aviate’s solutions. You will serve as a trusted advisor to your customers, identifying opportunities to strengthen partnerships, improve operational efficiency, and drive measurable business outcomes. Responsibilities: Account Management and Growth: • Execute account plans designed to grow CAMP Aviate’s revenue through customer retention, expansion, cross-sell, and upsell opportunities., • Develop and maintain trusted advisor relationships with key stakeholders within your portfolio of accounts., • Identify opportunities to expand CAMP Aviate’s footprint within existing customer organizations and support new business opportunities through referrals and advocacy., • Drive customer adoption and value realization by aligning CAMP Aviate solutions with customer business objectives.Customer Engagement & Success:, • Develop a comprehensive understanding of customer operations, business drivers, goals, and challenges., • Conduct regular business reviews with customers to evaluate performance, identify opportunities, and ensure continued alignment with strategic objectives., • Proactively identify risks to customer satisfaction, adoption, and retention, and coordinate appropriate action plans., • Serve as the primary point of contact and advocate for customers within CAMP Aviate.Revenue Retention & Expansion:, • Own renewal strategies and execution for assigned accounts, ensuring high retention rates and customer satisfaction., • Identify expansion opportunities through additional products, services, users, locations, and business units., • Collaborate with customers to develop success plans that support long-term partnership growth.CRM & Pipeline Management:, • Maintain accurate customer records, account plans, renewal forecasts, and opportunity tracking within CAMP Aviate’s CRM platform., • Consistently document customer interactions, strategic initiatives, risks, opportunities, and next steps., • Develop and manage account growth plans and revenue forecasts for assigned territories and customer segments.Cross-Functional Collaboration:, • Work closely with Customer Success, Product Management, Support, Marketing, Revenue Operations, and Executive Leadership teams to deliver an exceptional customer experience., • Partner with internal stakeholders to address customer needs, resolve issues, and communicate product feedback., • Advocate for customer priorities and communicate market insights throughout the organization.Industry Expertise & Market Intelligence:, • Serve as CAMP Aviate’s eyes and ears within the aviation industry., • Stay informed about industry trends, operational challenges, regulatory changes, and emerging technologies., • Regularly communicate customer feedback, competitive intelligence, and market opportunities to internal teams. You have: Experience & Background: • 5+ years of experience in Account Management, Customer Success, Strategic Relationship Management, or SaaS B2B sales., • Proven track record of retaining and growing customer revenue through renewals, expansion, and strategic account planning., • Experience managing complex enterprise or mid-market customer relationships across multiple stakeholders., • Demonstrated success working with software, technology, or aviation-related solutions.Business & Technical Skills:, • Experience leveraging business tools and technologies to optimize customer engagement and account performance, including Salesforce, HubSpot, Power BI, and customer success platforms., • Strong analytical skills with the ability to identify trends, uncover opportunities, and develop actionable account strategies., • Experience creating forecasts, account plans, business reviews, and customer success plans.Relationship Building:, • Exceptional interpersonal and communication skills with the ability to build executive-level relationships., • Skilled at navigating complex customer organizations and influencing decision-makers., • Strong consultative approach with a focus on solving business problems and delivering measurable value.Personal Attributes:, • Confident, collaborative, and customer-focused., • Highly organized with strong attention to detail and follow-through., • Entrepreneurial mindset with the ability to thrive in a fast-paced and evolving environment., • Passionate about customer outcomes and continuous improvement.Travel & Industry Knowledge:, • Willingness to travel up to 25%, including customer visits, industry conferences, and company events., • Fluent in English, both written and verbal., • Experience in aviation, aerospace, maintenance operations, or business aviation is highly desirable.Success Measures:, • Success in this role will be measured through:, • Gross Revenue Retention (GRR), • Net Revenue Retention (NRR), • Renewal Rate, • Expansion Revenue, • Customer Health Scores, • Product Adoption & Utilization, • Customer Satisfaction (CSAT), • Net Promoter Score (NPS), • Strategic Account Growth, • Executive Relationship Development, • Forecast Accuracy, • Customer Advocacy & References Salary: $80,000 Base + Commission Structure (Depending on experience) Why Work at CAMP? Join a culture where your ideas matter, your impact is real, and your growth is supported. Be part of a team reimagining the future of aviation. CAMP is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer – vets/disabled CAMP is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact hr@campsystems.com. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or protected veteran status EEO.

Job Description US Aviation is part of a nationwide family of companies. We are expanding and looking for talent to join our team. Currently, we are hiring dependable, punctual and professional Cabin Cleaners for our operation. We are an Equal Opportunity Employer and we promote from within. For eligible employees, benefits are available. Key Responsibilities: • Perform tasks as assigned by the Lead/Supervisor and outlined in the scope of work., • Remove all trash from aircraft., • Clean and restock all lavatories., • Clean galley, all seats, seat back pockets, tray tables, and replace soiled magazines., • Conduct thorough security searches and submit all Lost and Found items to the immediate Supervisor., • Review and adhere to safety instructions when operating and driving ground equipment., • Always maintain company vehicles in a well-organized and clean manner; assist in pre and post operation inspections (POIs) of vehicles during the assigned shift., • Review posted updates on Cabin Cleaning or Ramp Operations before each shift begins., • Ensure all break room areas, warehouse areas, and dock areas are clean and free of debris., • Perform duties in a consistently safe manner, ensuring no damage occurs to any company vehicles, airline vehicles/equipment and/or aircraft. Ensure actions do not cause injury to self, employees or agents working in common areas., • Report any injury or property damage immediately to Shift Supervisor and provide written statements as requested regarding any such injury or damages., • Immediately notify Shift Supervisor of any irregular activities that may impact service to airline partner(s). Additional Skills and Abilities: • Must sign or clock in/out at the beginning and end of the scheduled shift., • Proper uniform attire is required when reporting to work., • Safety measures must always be taken including wearing mandatory Personal Protective Equipment (PPE) during assigned shifts and as part of the uniform., • Adhere to rules and regulations outlined in Employee Handbook at all times., • Demonstrate respectful and helpful behavior to fellow employees, airline personnel, passengers, and other company employees working within the assigned area., • Must be capable of reading and understanding flight schedule(s)., • A valid driver's license is required., • Must be at least 18 years of age, have access to reliable transportation, and authorized to work in the United States. Physical Requirements: • Must be able to walk, bend, stoop, lift, reach, and push for extended periods of time during the assigned shift, • Walking and climbing up and down stairs is required to reach planes, access garbage disposal areas, and depart from planes throughout the shift., • Work spaces can be confined and small; must be able to work in tight spaces., • The ability to lift and carry up to 50 pounds is required., • Exposure to inclement weather, including hot and cold temperatures, is common for this role., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description About Bartell Hotels: Bartell Hotels is San Diego's largest independent hotel owner-operator with a sharp focus on employees, customers and community. This diverse collection of properties reflects Southern California's natural beauty, love for active lifestyles and exceptional hospitality. Our hotels combine classic and modern design, farm-to-table restaurants and energized bars, three beautiful marinas and the iconic Humphreys Concerts by the Bay entertainment venue. Our Culture: At Bartell Hotels you will find a team of incredibly friendly people who are committed to exceeding guest expectations every day. The Bartell Hotels culture emphasizes respect, pride, teamwork and development. When you work at Bartell Hotels, you are encouraged to think entrepreneurially, and you are empowered to perform and show leadership in ways that can help advance your career. We often look within to promote deserving colleagues at all levels. Bartell Hotels embraces colleague diversity, inclusion and equity, and is firmly committed to respecting and appreciating each colleague. Bartell Hotels is an equal opportunity employer. Primary Objective of Room Attendant Position To maximize customer satisfaction by providing neat and clean customer rooms in accordance with the standards of Bartell Hotels Responsibilities • Insures customer satisfaction by cleaning customer rooms daily according to operational policies and standards, • Removes soiled bed and bath linens and replaces with clean linens as required, • Removes accumulated trash and debris from room as required, • Cleans bathroom area, dusts all surfaces and vacuums room as required, • Replenishes promotional materials and literature and room amenities, • Reports maintenance requests and replacement orders, • Turns in articles left in rooms to Housekeeping office for "Lost and Found" handling, • Leaves all customer belongings in stay over rooms unless they have been discarded in the trash, • Maximizes job efficiency and neat, orderly appearance by maintaining well-stocked and clean supply cart and linen closet, • Maintains vacuum cleaner by replacing and/or emptying bag daily, cleaning and placing according to S.O.P.'s, • Notifies Housekeeping Department immediately if any stock shortages exist, • Pulls any damaged or rewash linen and returns them to the Housekeeping Department, • Insures safety and security by securing the locks on linen closets and linen chute doors, • Reports all "Do Not Disturb" or bolted door rooms to Housekeeping department as required, • Keeps immediate supervisor promptly and fully informed of all problems or unusual matters of significance Other duties may be assigned as needed Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl, as well as frequently lifting and/or moving up to 50 pounds. The employee must also be able to go up and down a flight of stairs while carrying 50 pounds. The employee is sometimes exposed to outside weather conditions and the noise level in the work environment is usually moderate.

Job Description General information Job Title Ramp Agent AS/FT - SAN Date Thursday, April 30, 2026 Entity Unifi Aviation, LLC State California City San Diego Base Pay Rate: $ 18.00 Full/Part Time Full Time Exempt or Non-Exempt Position Non-Exempt Shift A.M. shift, P.M. shift Requirements and Description Unifi has decades of experience in the aviation services industry. We continue to innovate, adapt, and grow by leaning on our experience and expertise in airline ground services. Our vision is to be the most respected company by providing exceptional experience getting aircraft and passengers to their destination safely. We are seeking individuals to join our growing team who are passionate, have integrity, and have empathy for how their words and decisions affect our employees, customers, and partners. No experience is required. Paid training is provided for all new employees. Join our team and see where the flight benefits can take you. Job Summary: Responsible for marshalling aircraft in and out of gate, loading, unloading and sorting baggage. Also responsible for cleaning the aircraft, restocking items, de-icing aircraft, carrying out inspections, hazard checks. Operate ramp equipment such as stairs and bridges. Benefits: • Flight Privileges: Offered after 30 days for employees and eligible family members!, • Weekly pay for hourly employees (could change it specific to the state e.g. CA), • Full time starts at 30 hours per week!, • Paid time off (for full-time employees)., • Comprehensive Medical, Dental and Vision Insurance (for full-time employees)., • 401k for all employees., • Exclusive discounts and additional wellness programs. Job Duties:, • Marshall all arriving, departing, and towed aircraft on the ramp., • Perform wing walker duties to protect the aircraft wing from equipment in the path of pushback and de-ice aircraft as required., • Load, unload, sort and transfer passenger baggage, airmail, freight and company material in and out of aircraft bins, belt loaders or baggage carts., • Operate ramp equipment like bag tugs, belt loaders, aircraft tow tractors, water servicing vehicles, and lavatory servicing vehicles., • May be assigned cabin service duties like servicing the aircraft, cleaning lavatories and cabin, restocking supplies, and other items., • Adhere to all safety procedures and policies., • Perform other related duties as assigned within the appropriate skill, experience and, capabilities expected for this position., • Complete work in a safe and secure manner, following company safety and operational standards, • Immediately report safety and security incidents as well as potential hazards in line with the Unifi Fair and Just Culture Policy. Qualifications:, • High School diploma or GED., • Must be at least 18 years of age., • Must be able to obtain credentials required as per airport or state or customs requirements., • Possess a valid Driver’s License. Physical requirements:, • Must be able to frequently lift, greater than 70lbs and constantly lift up to 70 lbs; Constantly push, pull up to 70 lbs; and constantly walk, stand, reach above shoulder, climb, crawl, stoop, squat, kneel, & bend. Working conditions:, • Must be able to work in rotating shifts and hours, nights, weekends and holidays, overtime., • Must be able and open to work in outside weather conditions which may include severe seasonal elements. "Unifi is committed to equal opportunity employment regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability or veteran status."

Job DescriptionWe are building a talent network of experienced drone operations professionals for potential upcoming programs supporting advanced UAS operations and aerial logistics initiatives across the United States. Responsibilities • Conduct and oversee commercial drone operations in accordance with applicable regulations and operating procedures, • Perform pre-flight, in-flight, and post-flight activities, • Assess flight readiness and operational conditions, • Monitor operational safety and compliance requirements, • Support incident reporting and operational documentation, • Collaborate with field operations, maintenance, and support teamsRequirements, • FAA Part 107 Remote Pilot Certificate, • Experience with commercial UAS operations, • Strong understanding of airspace, safety, and operational procedures, • Experience in BVLOS, logistics, delivery, inspection, or autonomous operations is a plus, • Ability to work in dynamic operational environments We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description General information Job Title Ramp Agent AS/PT- SAN Date Thursday, April 30, 2026 Entity Unifi Aviation, LLC State California City San Diego Base Pay Rate: $ 18.00 Full/Part Time Part Time Exempt or Non-Exempt Position Non-Exempt Shift A.M. shift, P.M. shift Part Time Days Days of the weekShiftShift Start TimeMonday, Tuesday, Wednesday, Thursday, Friday, Saturday, SundayA.M. shift, P.M. shift Requirements and Description Unifi has decades of experience in the aviation services industry. We continue to innovate, adapt, and grow by leaning on our experience and expertise in airline ground services. Our vision is to be the most respected company by providing exceptional experience getting aircraft and passengers to their destination safely. We are seeking individuals to join our growing team who are passionate, have integrity, and have empathy for how their words and decisions affect our employees, customers, and partners. No experience is required. Paid training is provided for all new employees. Join our team and see where the flight benefits can take you. Job Summary: Responsible for marshalling aircraft in and out of gate, loading, unloading and sorting baggage. Also responsible for cleaning the aircraft, restocking items, de-icing aircraft, carrying out inspections, hazard checks. Operate ramp equipment such as stairs and bridges. Benefits: • Flight Privileges: Offered after 30 days for employees and eligible family members!, • Weekly pay for hourly employees (could change it specific to the state e.g. CA), • Full time starts at 30 hours per week!, • Paid time off (for full-time employees)., • Comprehensive Medical, Dental and Vision Insurance (for full-time employees)., • 401k for all employees., • Exclusive discounts and additional wellness programs. Job Duties:, • Marshall all arriving, departing, and towed aircraft on the ramp., • Perform wing walker duties to protect the aircraft wing from equipment in the path of pushback and de-ice aircraft as required., • Load, unload, sort and transfer passenger baggage, airmail, freight and company material in and out of aircraft bins, belt loaders or baggage carts., • Operate ramp equipment like bag tugs, belt loaders, aircraft tow tractors, water servicing vehicles, and lavatory servicing vehicles., • May be assigned cabin service duties like servicing the aircraft, cleaning lavatories and cabin, restocking supplies, and other items., • Adhere to all safety procedures and policies., • Perform other related duties as assigned within the appropriate skill, experience and, capabilities expected for this position., • Complete work in a safe and secure manner, following company safety and operational standards, • Immediately report safety and security incidents as well as potential hazards in line with the Unifi Fair and Just Culture Policy. Qualifications:, • High School diploma or GED., • Must be at least 18 years of age., • Must be able to obtain credentials required as per airport or state or customs requirements., • Possess a valid Driver’s License. Physical requirements:, • Must be able to frequently lift, greater than 70lbs and constantly lift up to 70 lbs; Constantly push, pull up to 70 lbs; and constantly walk, stand, reach above shoulder, climb, crawl, stoop, squat, kneel, & bend. Working conditions:, • Must be able to work in rotating shifts and hours, nights, weekends and holidays, overtime., • Must be able and open to work in outside weather conditions which may include severe seasonal elements. "Unifi is committed to equal opportunity employment regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability or veteran status."

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking an engineering manager of Mechanical Design to support the development of our next-generation autonomous UAV platform. In this high-ownership, high visibility role you will lead a team of engineers developing mechanical systems to support Shield AI’s next generation aircraft program(s). You will work the director of engineering in a deputy capacity to support collaboration across engineering sites, align technical leaders, create mentorship opportunities for junior engineers, and assist in leveling engineering resources across vehicles and programs. You will set the bar for excellence through technical demonstration, guidance, and mentorship. What you'll do: • Lead a team designing complex electro-mechanical solutions for flight critical avionics systems. This includes packaging, electrical interconnects, thermal management, and integration of designs into the X-BAT aircraft, • Drive structural, thermal, and modal analyses for electromechanical systems to ensure survivability in harsh environments, • Work cross-functionally with electrical engineering, supply chain, supplier development engineering, manufacturing, and other mechanical engineering teams, • Ensure avionics meet performance, safety, environmental, and EMI/EMC compliance standards on a long-term path to airworthiness certification, • Lead by example - own work from design, verification, and through production Required qualifications:, • B.S. in Mechanical/Aerospace Engineering, • 10+ years of experience in mechanical & electrical equipment design for aerospace, including harness integration and mechanical component design, • Expertise in CAD software (NX, SolidWorks, CATIA, or similar) for 3D modeling, drawing creation, and system layout. Familiarity with eCAD software (Altium, Cadence, Allegro), and harness design software (Capital, Zuken), • Experience working with electrical engineers to define PCB constraints, develop circuit cards, and care for all the mechanical interfaces, • Experience with finite element analysis (FEA), thermal analysis, and fatigue/lifecycle testing, • Experience working directly with fabrication shops, contract manufacturers, and suppliers., • Ability to work in a fast-paced, agile development environment with evolving priorities, • A demonstrated record of working hard, being trustworthy, holding yourself to high standards, and being kind to others #LI-JM2#LE Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Senior Fluid Systems Engineer to support development of liquid cooling and hydraulic fluid systems for our groundbreaking jet-engine VTOL military UAV platform, X-BAT. You will design components and fluid systems, engage with suppliers, perform system and component analysis and sizing, and own multiple aspects of X-BAT’s fluid systems. Required qualifications: • B.S. in Mechanical Engineering (or equivalent)., • 5+ years experience with fluid or hydraulic system design, component design, system analysis, supplier management, requirements management, etc., • Demonstrated ability to execute design, build, test with rigor at speed, • Strong CAD skills (NX preferred), • Demonstrated proficiency with fluid or hydraulic system analysis, including 1st principles, Simscape, Amesim, etc., • Ability to work independently in fast-paced, cross-functional teams, • A demonstrated record of working hard, being trustworthy, holding yourself to high standards, and being kind to others, • Ability to obtain a S//SAR level security clearance desired.Preferred qualifications:, • Experience with environmental and operational robustness (vibration/shock, thermal extremes, contamination, corrosion, sand/dust, etc.)., • Experience supporting ground test and flight test campaigns and system checkout, failure investigations., • Familiarity with reliability and safety methods (DFMEA/FTA, fault containment, safe-state thinking) in collaboration with systems safety.#LI-MS1#LC Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Currently seeking A&P Technicians in San Diego, CA Experience with DHC-6, CASA C212 and/or DHC-4T Caribou preferred. Experience with PT6 and/or TPE331 turboprops is preferred. BASIC FUNCTION SUMMARY A&P Technicians work on company owned aircraft, performing flight line support as well as airframe and engine maintenance, repair, modifications, and inspections. Minimum of four years total aviation maintenance experience, plus a civilian or military aviation maintenance technical school is preferred. REQUIRED QUALIFICATIONS Candidates must hold a Federal Aviation Administration (FAA) Airframe and Powerplant (A&P) License. Must meet CFR 65.83 recency experience Applicants must own basic Aviation hand tools stored in Mechanic‘s toolbox Must Hold Valid US Passport / US Citizen and valid United States Driver’s License Will be required to pass drug, alcohol and background check(s). Must be willing to work overtime and odd hours May be required to travel (CONUS) Must be able to read, write, speak and understand English Physical Demands: Climbing, standing, stooping, bending, pushing, kneeling, stretching, extensive walking and working in tiring uncomfortable positions. Special vision abilities required to perform this job are close vision, peripheral vision, depth perception and the ability to adjust and focus May require lifting of objects whose weight may exceed 75 pounds. Work Environment: The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment of inclement weather. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards. Rampart Aviation, LLC is an equal opportunity employer. Powered by JazzHR wlIGoSReyM

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. The Autonomous Pilot Integration team for launched effects builds autonomy solutions for small, often air- or ground-launched platforms that operate in multi-agent fleets and frequently in disconnected or air-gapped environments. We combine capabilities from the Autonomy Capabilities team (motion planning, tactics), the Perception team (e.g., track fusion), and the HivemindSDK to develop the autonomy software that runs on launched effects platforms, then integrate, validate, and field it on the real hardware—for U.S. and international defense customers. Our engineers write new autonomy code—such as mission behaviors, platform-specific control, multi-agent coordination, contingencies, and executive autonomy—and own it end-to-end from software-in-the-loop, to hardware-in-the-loop, to vehicle-in-the-loop, to live test exercise. In this role, you'll develop and integrate autonomy capabilities for launched effects platforms, owning major features from design through operational deployment. You'll work closely with the Autonomy Capabilities and Perception teams, feature crews, autopilot vendors (e.g., PX4, ArduPilot), C2 providers, and customer partners to deliver mission-ready autonomy software. This is a hands-on role for engineers who enjoy solving challenging integration problems and seeing their software operate in demanding real-world environments. What You'll Do: Develop & Field Autonomy – Develop and integrate autonomy software solutions onto launched effects platforms, including payload computer bring-up, autopilot integration (e.g., PX4, ArduPilot), multi-agent coordination, and deployment to disconnected or air-gapped environments. Own major features from software-in-the-loop through live flight testing and operational deployment. Technical Leadership – Own major features or subsystems; drive technical execution, contribute to design decisions, mentor teammates, and help deliver complex autonomy capabilities. Collaboration Across Teams & Partners – Partner closely with the Autonomy Capabilities team (motion planning, tactics), the Perception team, feature crews, autopilot vendors (e.g., PX4, ArduPilot), C2 providers, and customer/contractor partners to deliver integrated autonomy capabilities. Design & Documentation – Contribute to design reviews, ICDs, integration planning, and post-mortems while helping improve engineering rigor and cross-team execution. Pre-deployment Preparation – Build, configure, and validate mission-ready systems for Capability Releases and fleet-scale deployments; coordinate hardware/software compatibility, mission readiness, and release readiness across engineering teams. On-site Test & Mission Support – Travel to test sites, customer exercises, and live demonstrations to support flight operations, system bring-up, troubleshooting, and mission execution under operational timelines. Hardware/Software Debugging – Diagnose and resolve integration issues across autonomy software, payload computers, embedded systems, and platform interfaces using simulation, laboratory testing, and operational data. Mission Data & Debrief Support – Capture mission and test data, reproduce issues in simulation, and partner with autonomy capability owners to rapidly drive improvements into future releases. Continuous Improvement – Develop tools and processes that improve integration timelines, testing reliability, deployment efficiency, and mission readiness. C2 Interoperability & Standards – Implement and validate interfaces with C2 providers while supporting compliance with common message and open-systems standards (e.g., UCI, OMS, MOSA, WOSA, TAK/CoT). Travel Requirement – Members of this team typically travel around 10–20% of the year to different office locations, customer sites, operator training events, flight tests, and integration exercises. Required Qualifications: BS/MS in Computer Science, Electrical Engineering, Aerospace Engineering, Mechanical Engineering, or equivalent practical experience. Typically requires 5+ years of relevant experience (or equivalent advanced degree experience). Strong proficiency in C++ and experience developing or integrating real-time or embedded systems. Experience with Linux-based development and embedded systems. Experience integrating complex software and hardware systems. Experience supporting system integration, testing, or field events. Ability to obtain a SECRET clearance. Preferred Qualifications: Experience with launched effects, unmanned systems, or autonomous platforms. Experience with PX4, ArduPilot, or comparable autopilot stacks. Experience with multi-agent autonomy. Python, Docker, CMake/Conan, or CI/CD experience. Experience supporting military field exercises or defense customers. #LI-ED1#LC Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on H-60 aircraft. Military aviation platform experience is a plus. This position will require a government issued clearance. DUTIES • Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes, • Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum; replace sections and patch old systems; cut, bend, shape, and form metals for items that have numerous irregular angles, planes, and curves with varying pitch and circumference; use a variety of assembly joints, complex fastening systems, riveted or welded joints, drill or punch holes; and assemble or repair items by seaming, bolting, screwing, riveting, tacking. Assembly methods shall meet appearance and strength standards, as well as critical tolerances. As a condition of employment Contractor personnel will be required to pass a FRCW administered certification skills examination, • Use precision measuring instruments such as calipers, protractors, snap ring, height, depth, dial and screw pitch gauges, squares, rulers, trammel points, and sine bars, • Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS • High School Diploma or equivalent, • Minimum 4 years Sheetmetal Mechanic (Aircraft Mechanic II) experience, • H-60 aircraft experience preferred, • A&P license not required but a plus, • Prefer experience from military fixed wing community or civilian heavy structure background, • Experience in heavy structure U.S. Military or related FAA or civil aviation, • Up to 25% travel may be required, • Must be a US Citizen, • Must be able to obtain and/or maintain a secret clearance, • We maintain a drug-free workplace and perform pre-employment and post offer substance abuse testing. Functional Requirements: • Must be able to walk, stand, crawl, kneel and bend on level and/or inclined surfaces for certain periods throughout the day., • Must be able to climb stairs, ramps, ladders, and work stands., • Must be able to crouch, crawl, grasp, pull over hand, push, reach or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders., • May be required to lift up to 44 pounds and heavy, moderate carrying up to 44 pounds., • May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools., • Must be able to see imperfections, micrometer readings and other small scales with or without corrective lens., • Must be able to communicate by voice and detect sound by ear., • Must be able to distinguish color, shades of color and judge three-dimensional depth., • May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, crane, truck, tractor, etc. Environmental Factors: • Work in an inside/outside environment to include working around machinery, objects, vehicles, ladders, and scaffolds., • Excessive noise and vibration that can be intermittent or constant., • Environmental conditions can included but not limited to dust, silica, asbestos, fumes, smoke, gas, solvents such as degreasing agents, grease, oils, and electrical energy, • Working on slippery or uneven surfaces, • Working closely with others or working alone, • Possible protracted or irregular hours of work as needed or required. EQUAL OPPORTUNITY EMPLOYER / VEVRAA /ADA TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law. #jsfirm Job Posted by ApplicantPro

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:As a Senior Staff Systems Engineer on Shield AI’s next gen UAS program, you will play a pivotal role in designing, developing, and integrating cutting-edge autonomous aircraft systems for national defense. You will lead the technical execution of system architecture, ensuring seamless integration of avionics, autonomy, propulsion, sensor payloads, and mission-critical systems. This position requires a deep understanding of aerospace systems engineering, autonomy, and complex system integration. You will work cross-functionally with teams in hardware, software, autonomy, flight operations, and manufacturing to develop a scalable, mission-ready platform capable of operating in contested environments. Your expertise will be critical in defining system requirements and architectures through model-based systems engineering, conducting trade studies, ensuring compliance with military and aviation standards, and supporting the aircraft through flight testing and operational deployment.What You'll Do: • Perform System Architecture & Design: Develop and refine the system architecture for the next gen UAS, ensuring seamless integration of avionics, autonomy, propulsion, sensor payloads, and mission systems., • Define and document system-level behavior, including modes, states, transitions, and fault responses, • Support safety analyses (FHA, FMEA, FTA) by defining behavior under fault conditions, • Define and Manage System Requirements: Establish top-level requirements, decompose them into subsystems, and maintain traceability across the development lifecycle., • Autonomy & AI Integration: Work closely with autonomy and software teams to integrate AI-driven flight control, decision-making, and mission execution capabilities., • Model-Based Systems Engineering (MBSE): Utilize SysML, DOORS, or other MBSE tools to create digital system models, conduct trade studies, and optimize system performance., • Risk Management & Trade Studies: Conduct trade studies to evaluate design alternatives, assess technical risks, and ensure the best engineering solutions for mission effectiveness., • Stakeholder & Customer Engagement: Work closely with DoD stakeholders, industry partners, and government agencies to align system capabilities with operational requirements., • Cross-Functional Collaboration: Partner with hardware, autonomy, software, propulsion, and flight operations teams to drive seamless system integration and rapid development cycles.Required Qualifications:, • 10+ years of experience in systems engineering for aerospace, defense, or autonomous aircraft systems., • Demonstrated experience defining system behavior logic and operational modes, • Deep expertise in system architecture, avionics integration, and autonomy-driven flight systems., • Proficiency in MBSE, DOORS, SysML, CAMEO, or similar system modeling tools for complex systems design and analysis., • Experience with Group 4 or Group 5 UAS, military aircraft, or autonomous airborne platforms., • Strong background in flight testing, system integration, and performance validation., • Knowledge of DoD acquisition processes, MIL-STDs, FAA airworthiness certification, and airborne system safety standards., • Demonstrated ability to lead cross-functional teams and drive complex projects to successful completion., • Ability to work in a fast-paced, agile development environment with shifting priorities., • Worked on developmental program from clean sheet to first flight, • Ability to obtain a S//SAR level security clearance desired.Preferred Qualifications:, • Experience developing AI-driven autonomy for unmanned aircraft., • Expertise in ISR, EW, and advanced sensor integration for airborne platforms., • Familiarity with modular open system architectures (MOSA) and Government Reference Architectures (GRA) for defense applications., • Prior experience working with defense primes, DoD stakeholders, or government R&D programs., • Active Secret or Top Secret clearance (or ability to obtain one).#LI-JM2#LE Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Structural Analyst to support the structural analysis and testing of advanced UAVs. In this role, you will work closely with Mechanical, Systems, Propulsion, and Aerospace Engineers to ensure the structural integrity of our lightweight, high-performance aircraft. You will contribute to the design, analysis, testing, and optimization of airframe structures and components, ensuring they meet performance, weight, and safety requirements. This role is ideal for engineers with 7+ years of experience looking to gain expertise in finite element analysis (FEA), composite materials, mechanical testing, and aircraft loads analysis in a fast-paced, high-tech aerospace environment.What you'll do: • Assist in building and refining finite element models (FEM) to evaluate the structural performance of UAV components., • Perform static, modal, fatigue, and vibration analyses to assess stress, deformation, and durability., • Conduct hand calculations to validate FEA results, ensuring accuracy and structural reliability., • Work with design engineers to optimize airframe structures, balancing weight, strength, and manufacturability., • Support the development of test plans for structural validation, including quasi-static, vibration, and shock testing., • Analyze flight telemetry and structural test data to improve modeling accuracy and correlate predictions with real-world performance., • Assist in defining load cases, material properties, and design margins for UAV airframe and mechanical components., • Document and present structural analysis reports and technical recommendations to engineering teams., • Collaborate with cross-functional teams to ensure structural requirements align with system performance goals., • Contribute to the continuous improvement of structural analysis methodologies, tools, and best practices.Required qualifications:, • B.S. in Mechanical Engineering, Aerospace Engineering, or related field., • 7+ years of experience in structural analysis, finite element modeling, or aircraft loads analysis., • Experience with FEA tools (ANSYS, NASTRAN, HyperWorks, or similar)., • Strong ability to perform hand calculations for structural strength, stability, and fatigue analysis., • Knowledge of composite materials and lightweight aerospace structures., • Familiarity with mechanical testing methods (static, vibration, and fatigue)., • Proficiency with data analysis tools (Excel, MATLAB, Python, or similar)., • Strong problem-solving skills, attention to detail, and ability to work in a team environment., • Ability to get a S//SAR level security clearance desired.Preferred qualifications:, • Master’s degree in Mechanical or Aerospace Engineering., • Experience in aircraft structural design, UAV airframe development, or aerospace testing., • Hands-on experience with structural testing, modal analysis, or composite modeling., • Exposure to CAD software (NX, SolidWorks) and PLM tools (Teamcenter or similar)., • Understanding of aerospace industry standards, structural certification processes, and material selection.#LI-JM2#LD Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:Shield AI is seeking a Structural Analyst to support the structural analysis and testing of advanced UAVs. In this role, you will work closely with Mechanical, Systems, Propulsion, and Aerospace Engineers to ensure the structural integrity of our lightweight, high-performance aircraft. You will contribute to the design, analysis, testing, and optimization of airframe structures and components, ensuring they meet performance, weight, and safety requirements. This role is ideal for engineers with 5+ years of experience looking to gain expertise in finite element analysis (FEA), composite materials, mechanical testing, and aircraft loads analysis in a fast-paced, high-tech aerospace environment.What you'll do: • Assist in building and refining finite element models (FEM) to evaluate the structural performance of UAV components., • Perform static, modal, fatigue, and vibration analyses to assess stress, deformation, and durability., • Conduct hand calculations to validate FEA results, ensuring accuracy and structural reliability., • Work with design engineers to optimize airframe structures, balancing weight, strength, and manufacturability., • Support the development of test plans for structural validation, including quasi-static, vibration, and shock testing., • Analyze flight telemetry and structural test data to improve modeling accuracy and correlate predictions with real-world performance., • Assist in defining load cases, material properties, and design margins for UAV airframe and mechanical components., • Document and present structural analysis reports and technical recommendations to engineering teams., • Collaborate with cross-functional teams to ensure structural requirements align with system performance goals., • Contribute to the continuous improvement of structural analysis methodologies, tools, and best practices.Required qualifications:, • B.S. in Mechanical Engineering, Aerospace Engineering, or related field., • 5+ years of experience in structural analysis, finite element modeling, or aircraft loads analysis., • Experience with FEA tools (ANSYS, NASTRAN, HyperWorks, or similar)., • Strong ability to perform hand calculations for structural strength, stability, and fatigue analysis., • Knowledge of composite materials and lightweight aerospace structures., • Familiarity with mechanical testing methods (static, vibration, and fatigue)., • Proficiency with data analysis tools (Excel, MATLAB, Python, or similar)., • Strong problem-solving skills, attention to detail, and ability to work in a team environment., • Ability to get a S//SAR level security clearance desired.Preferred qualifications:, • Master’s degree in Mechanical or Aerospace Engineering., • Experience in aircraft structural design, UAV airframe development, or aerospace testing., • Hands-on experience with structural testing, modal analysis, or composite modeling., • Exposure to CAD software (NX, SolidWorks) and PLM tools (Teamcenter or similar)., • Understanding of aerospace industry standards, structural certification processes, and material selection.#LI-MS1#LC Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: The Aircraft Simulation team turns frontier autonomy into mission-ready aircraft. We own the commit-to-flight pipeline—deterministic aircraft and mission simulation, HITL/SITL integration, CI/CD, and tooling for automated flight qualification testing. Our goal is simple: make AI fly—safely, reliably, and fast. As a Staff Modeling & Simulation Engineer, you will be dedicated to Shield AI’s next-generation aircraft program, contributing to our emergent modeling & simulation tooling. You’ll design, build, and scale novel aircraft subsystem models, develop infrastructure that enables robust automated testing for our next generation XBAT product line, and conduct system performance analysis. What you'll do: • Develop models and infrastructure for the integrated simulation pipeline in C++., • Design deterministic, high-performance simulation tools capable of faster-than-real-time execution for development, testing, and release., • Implement test scenarios and write unit, system, and regression tests., • Collaborate across autonomy, embedded, GNC, and test engineering to ensure the simulation mirrors real aircraft behavior and mission scenarios., • Contribute to platform-agnostic simulation tooling to accelerate current and future aircraft design and development efforts., • Perform verification and validation (V&V) analysis activities on modeling tools., • Conduct system performance analysis and generate reports and visualizations., • Utilize best practices in C++, simulation architecture, and performance engineering.Required qualifications:, • BS or MS in Computer Science, Aerospace, Robotics, or related field., • 7+ years of experience in simulation software development, with emphasis on modern C++ (C++17 or later) and performance optimization., • Strong understanding of rigid-body dynamics, kinematics, aerodynamics, and sensor mechanics., • Proven experience developing or integrating simulation systems for robotics, aerospace, and/or autonomous systems., • Ability to debug complex build and runtime environments (CMake, package management, logging, and profiling tools)., • Experience with software testing tools (GTest, etc.), • Experience with simulation V&V., • Strong collaboration and communication skills across software, hardware, and systems disciplines., • Ability to obtain a S//SAR level security clearance desired.Preferred qualifications:, • Grasp of real-time and deterministic software design, including multi-threading, synchronization, and memory management., • Experience with DevOps-integrated simulation workflows, including CI/CD and automated hardware testing environments., • Working knowledge of Python for data analysis, test automation, or simulation orchestration., • Familiarity with aircraft and flight physics modeling.#LI-SM1#LD Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Are you a passionate and innovative engineer looking to help develop state-of-the-art AI and robotics products? Are you eager to make a positive difference in the world? Do you want to work alongside mission-driven and values-focused teammates? Shield AI is just the place for you! The Hivemind Quality team is committed to ensuring our autonomy platform delivers reliable, mission-ready capabilities through rigorous integration, validation, and flight testing. We work closely with autonomy, platform, and hardware teams to validate new features in simulation, hardware-in-the-loop, and real-world flight environments, ensuring our customers can confidently deploy autonomous systems in demanding operational conditions. We are seeking an experienced Senior Engineer, Flight Test passionate about autonomy development and system validation. In this role, you will develop and execute comprehensive flight test strategies that validate autonomous behaviors, software integrations, and end-to-end system performance. You will work closely with software, hardware, and product teams to reproduce real-world mission scenarios, identify product issues, and improve the quality and reliability of the Hivemind platform. You will also develop tooling that accelerates testing and analysis while mentoring engineers and helping establish best practices across the organization. This position bridges software quality, systems integration, and flight operations—ensuring our autonomy platform delivers reliable, mission-ready autonomous capabilities. What you'll do: • Develop and execute flight test plans that validate new autonomy capabilities, software integrations, and system performance in real-world flight environments., • Design and execute test scenarios that reproduce operational customer workflows and mission conditions to identify software defects, integration issues, and performance limitations., • Build analysis tools and validation workflows that improve test coverage, accelerate regression testing, and reduce time to identify issues., • Review flight logs, telemetry, rosbags, and system data to triage issues, perform root-cause analysis, and collaborate with engineering teams to drive resolution., • Work closely with middleware, autonomy, and integration teams to develop complementary test strategies, share tooling, and improve overall product quality., • Provide technical guidance to junior engineers, establish testing standards, and help improve engineering processes across the organization., • Maintain standard operating procedures, participate in flight operations, and contribute to the continuous improvement of testing processes and operational readiness.Required qualifications:, • Typically requires a minimum of 5 years of related experience with a Bachelor's degree; or 4 years and a Master's degree; or equivalent work experience., • Proficiency in software quality engineering, test automation, and programming with Python and C++., • Experience planning and executing field or flight testing for robotics, autonomous systems, or complex software platforms., • Experience developing automated test tooling, validation frameworks, or data analysis tools., • Demonstrated experience designing, documenting, executing, and tracking test plans, test cases, and software defects., • Strong problem-solving skills with the ability to analyze flight logs, telemetry, and system behavior to identify root causes., • Excellent communication skills with the ability to collaborate across software, hardware, product, and test organizations., • FAA Part 107 Remote Pilot Certificate (or the ability to obtain one within a reasonable timeframe).Preferred qualifications:, • Experience using GenAI tools to improve engineering productivity or software quality., • Experience with C++14/C++17, TypeScript, JSON, and modern software development practices., • Experience with ROS., • Proficiency with simulation tools and Hardware-in-the-Loop (HIL) testing environments., • Experience with CI/CD pipelines., • Familiarity with networking, Linux operating systems, and radio communications., • Experience testing autonomous aerial systems or other robotic platforms., • Experience analyzing flight telemetry, sensor data, and autonomy behaviors. #LC Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Shield AI has been redefining autonomous aviation with cutting-edge AI and GPS/RF-denied navigation technologies for the past few years. We’re looking for a software engineer, well versed in development and testing, to help continue building V-BAT's test operations, specifically automation capabilities and tools used to test software components ranging from autonomy, embedded systems, ground control applications, and more – you will gather requirements and write software to automate them. This is an opportunity to build and solve problems defense primes are unwilling to. You’ll be supported by world-class engineers, but you’re expected to learn on the job and deliver weekly – you’ll need to be hungry and motivated to grow!WHAT YOU'LL DO: • Work directly with our GNC and Embedded teams daily to build software that leverages simulation, avionics, and/or custom hardware to automate testing, • Define test cases to verify and validate embedded or GNC software at a system level, automating them to run continuously, • Implement software interfaces and drivers to orchestrate simulation environments, hardware devices, and test equipment – enabling real-world behaviors, failure injection, and hardware manipulation for various test scenarios, • Quickly prototype solutions using software & hardware to unblock testing, harden your prototype into scalable products for continuous release testing, • Support release test planning and execution leading up to flight test events and major product milestones REQUIRED QUALIFICATIONS:, • 2+ years of related experience with a Bachelor’s degree (CE, CS, EE); or some industry experience (intern, startup, self-projects) with a Master’s or PhD degree, • Strong C++ or Python skills, basic proficiency in the other, • Familiarity with common version control (git) and build/packaging systems (CMake, Poetry, etc), • Passion for growth, fast-paced environments, and holding self to a high standard of excellence PREFERRED QUALIFICATIONS, • 5+ years of related experience building automated test solutions, • Experience building automated test solutions for aircraft of autonomous vehicles, • Experience in automated testing, bare-metal firmware development, or simulation tooling #LI-SM1 Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description The Director, SEC Reporting and Technical Accounting is a Senior Technical Accounting Professional responsible for SEC external reporting, complex accounting research, policy development, and supporting the quarterly and annual close and filings. Acts as subject matter expert on US GAAP, emerging standards, and the SEC reporting process; partners with Finance, Legal, Investor Relations, and external auditors to ensure accurate, timely, and compliant disclosures. Supports earnings releases, investor materials, and XBRL tagging as needed. Essential Functions: • Lead preparation and review of SEC filings and disclosure deliverables, including Form 10-K, 10- Q, 8-K, and registration statements; coordinate disclosure checklists and XBRL tagging., • Perform and document technical accounting research on complex or novel transactions (e.g., business combinations, leases, share-based compensation, equity transactions)., • Draft technical accounting memoranda that summarize facts, applicable guidance, management conclusions, sensitivity analyses, and disclosure requirements., • Develop, update, and communicate accounting policies, procedures, and internal controls, drive SOX remediation and control testing where applicable., • Partner with FP&A and accounting teams to prepare reconciliations, roll forwards, EPS calculations, and supporting schedules for external reporting., • Manage relationships with external auditors and assist audit committee preparation and responses to audit requests., • Monitor and interpret new FASB, SEC, and industry guidance; lead implementation projects for new accounting standards and deliver training to stakeholders., • Provide day-to-day technical accounting support to business partners on transactions, contracts, and system implementations., • Advise on M&A, divestitures, equity transactions, joint ventures, and system implementations from a technical accounting perspective., • Provide technical accounting training and mentorship to accounting teams; review workpapers and complex journal entries., • Perform other duties as required., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Qualifications and Competencies: • Ability to obtain/maintain Security Clearance- U.S. Citizenship required., • Deep knowledge of US GAAP and SEC reporting requirements, including experience producing 10-Qs/10-Ks and related disclosure packages., • Proven experience writing technical accounting memos and making defensible judgments on complex issues., • Strong written and verbal communication skills for explaining technical issues to non-accountants and interacting with auditors and the audit committee., • Strong Excel skills and experience with financial reporting systems; familiarity with XBRL tagging and EDGAR filing process preferred., • Directs and provides expert knowledge in the strategic function of the department., • Develops short and long-term people and organizational strategy., • Leads with impact & influence., • Establishes credibility, effectively persuades and develops others, and achieves important objectives collaboratively., • Sets performance standards and encourages employee engagement and results through delegation, continuous feedback, goal setting, and performance management., • Maintains transparent communication., • Appropriately communicates organization information through department meetings, one-on-one meetings, and appropriate email, and regular interpersonal communication. Education / Certifications: • Bachelor's degree in accounting, Finance, or related field; CPA required. Experience: • 10+ years of progressive public company accounting experience or Big Four public accounting experience with significant technical accounting and SEC reporting exposure., • Experience with ASC 606, ASC 842, business combinations (ASC 805), ASC 718, and income taxes., • Hands-on experience with disclosure management and XBRL tools. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Constantly required to sit, and to reach to use computers and other office equipment Note: For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. The Company provides a reasonable range of compensation. Actual compensation is influenced by an array of factors including, but not limited to, skill set, level of experience, and specific location. The range of starting pay for this position is for the listed location only. Salary Range$196,000—$220,300 USD About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. The Hivemind Software Engineering Integration and Test team is seeking a Senior Automated Test Engineer to design, develop, and scale advanced automated testing and CI/CD infrastructure for our next-generation autonomy platform. You will help develop test frameworks that enable this software ecosystem to create, test and deploy resilient autonomy capabilities for unmanned aircraft and robotic platforms operating in complex, contested, and GPS-denied environments. You will work with a robust suite of autonomy and mission software components, including production flight code, simulation and synthetic environment tooling, mission planning and orchestration systems, operator-facing Ground Control Station (GCS) applications, telemetry and data pipelines, and cloud-native developer infrastructure. In this role, you will help ensure the reliability, scalability, and quality of the Hivemind ecosystem through advanced automation, validation infrastructure, and AI-assisted engineering workflows. You will develop automated test frameworks, CI/CD systems, and verification tooling that support distributed autonomy software spanning onboard edge compute, APIs, web-based operator interfaces, simulation environments, and hardware-in-the-loop systems. Working closely with software, autonomy, simulation, and systems engineering teams, you will contribute to a high-assurance development environment focused on mission-critical reliability, rapid iteration, and engineering excellence. The ideal candidate has strong experience in Python-based automation, distributed systems testing, developer tooling, and modern CI/CD practices, along with an interest in autonomy, aerospace, robotics, or safety-critical software systems. Experience leveraging AI-assisted development and intelligent automation tools to accelerate testing, debugging, analytics, and developer productivity is highly valued. What You'll Do: Design, develop, and maintain automated test frameworks for Autonomy and UI applications. Develop scalable automated test infrastructure for functional, integration, regression, system, and end-to-end testing across distributed software and hardware environments. Create and maintain CI/CD pipelines in GitLab using YAML configurations and shell scripting to support automated build, test, and deployment workflows. Build workflow automation tools and utilities in Python to improve test execution efficiency, reporting, environment setup, and developer productivity. Develop and maintain UI and API test automation using Go and TypeScript for modern web-based operator interfaces and mission control applications. Integrate automated testing into continuous integration environments to support rapid software delivery and high reliability standards. Collaborate closely with software, autonomy, simulation, and systems engineering teams to define verification strategies and improve software quality throughout the development lifecycle. Develop automated validation solutions for safety-critical and mission-critical aerospace software systems. Create test harnesses, simulators, stubs, and mocks to support automated verification in both simulated and hardware-in-the-loop (HIL) environments. Analyze test results, troubleshoot failures, and work with development teams to isolate root causes and improve system reliability. Improve test coverage, execution speed, maintainability, and observability of automated test systems. Contribute to software quality standards, coding best practices, and automation architecture decisions. Maintain clear technical documentation for test frameworks, automation workflows, CI/CD infrastructure, and validation procedures. Support release qualification activities and ensure traceability between requirements, tests, and verification results where applicable. Represent the Integration and Test Role in design reviews and advocate for a culture of engineering excellence and continuous improvement. Develop AI-assisted engineering workflows and analytics tools using modern coding agents such as Claude Code, Codex, and related LLM-based development platforms to improve test generation, failure triage, debugging, and developer productivity. Design intelligent automation pipelines that leverage AI-assisted code generation, log analysis, test analysis, and workflow orchestration to accelerate software verification and validation processes. Evaluate and integrate emerging AI-driven software engineering tools into automated test and CI/CD ecosystems while maintaining reliability, traceability, and engineering quality standards. Required Qualifications: 5+ years of experience building scalable, maintainable automation frameworks and/or developer tooling in Python. 5+ years of experience working with package management, dependency management, and build systems using tools such as conan, pip, setuptools, poetry, and nix or similar. 5+ years of experience building tooling for automated log collection, analytics, reporting, and failure triage. Strong understanding of asynchronous and concurrent programming in Python for scalable automation and parallel test execution. Experience developing and maintaining CI/CD pipelines using GitLab CI, YAML, and shell scripting. Experience with automated testing of distributed systems, backend services, APIs, and web-based UIs. Familiarity with modern test frameworks, automated validation strategies, and software quality methodologies. Experience working in Linux-based development environments. Strong debugging and problem-solving skills in complex software systems. Excellent collaboration and communication skills in cross-functional engineering environments. Preferred Qualifications: Experience integrating Python with native C/C++ libraries and applications using bindings, wrappers, subprocess interfaces, or interoperability tooling. Proficiency with Go and/or TypeScript for automation tooling or UI test development. Experience with C++ development or testing. Aerospace, robotics, autonomy, or safety-critical software experience. Familiarity with simulation, hardware-in-the-loop (HIL), or embedded system testing. Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description GROW WITH US AND STAY EXTRAORDINARY: Launch your career to new heights with Innoflight—one of San Diego’s fastest-growing Aerospace and Defense innovators. Here, visionary minds engineer the future of space technology through pioneering, compact, and cyber-secure solutions. From software-defined radios to cutting-edge cryptographic systems and avionics, everything we build powers the next era of New Space. Join our small, agile, and mission-driven team where your work has real impact and your growth has no limits. We’re not just reaching for the stars—we’re engineering them. Let’s innovate the infinite, together. A DAY IN THE LIFE: The Embedded Software Engineer III plays a key role in developing software solutions for satellite avionics and payload data processing systems. This position involves creating real-time system monitoring and power management software, preparing Linux board support packages for customer flight applications, and working with a variety of embedded systems, sensors, communication buses, radios, and communications security (COMSEC) equipment. Close collaboration with hardware and FPGA engineers is essential to deliver rugged, reliable, and integrated Low-Size, Weight, and Power (Low-SWaP) products to aerospace customers. WHAT YOU'LL DO: • Develop Embedded Software Systems: Design and implement embedded C/C++ software for multi-core processors and FPGA-integrated systems (Xilinx, Microchip, Vorago), targeting ARM Cortex and RISC-V architectures., • Build and Customize Linux Platforms: Configure Linux systems including kernel and bootloader (U-Boot, GRUB) modifications to support flight applications and mission requirements., • Implement Secure Communications: Develop networking and cryptographic functionality (e.g., IP, TLS, IPsec, AES, RSA, ECDSA) and interface with buses and protocols like SPI, I2C, UART, PCIe, SpaceWire, and Ethernet., • Drive End-to-End Development: Translate customer and system-level requirements into robust software solutions, participating in design, documentation, integration, validation, and testing., • Collaborate and Present: Work closely with cross-functional teams, support system integration, debug software/hardware issues, and present technical updates to both internal and external stakeholders., • Manage Development Lifecycle: Track features, bugs, and build processes using industry-standard tools for version control and release management.YOU’RE AWESOME AT: Embedded Software Development: Expertise in embedded software design and implementation, particularly within aerospace applications. Complex Document Analysis: Ability to read, interpret, and analyze complex technical documents and specifications. Cybersecurity and Encryption: Familiarity with writing embedded C code that incorporates cybersecurity and encryption measures to ensure secure communications. WHAT YOU’LL NEED: • Bachelor’s Degree in Electrical or Computer Engineering, Computer Science, or related field., • 5 or more years of professional experience developing embedded software in C/C++ for Linux and/or RTOS-based systems., • Deep knowledge of embedded platforms, multi-core processors, and interfacing standards (SPI, I2C, UART, PCIe, etc.)., • Experience configuring bootloaders (U-Boot, GRUB) and customizing Linux kernels for application-specific needs., • Proficient with networking protocols (IP, TLS, IPsec) and cryptographic systems (AES, RSA, ECDSA, ECDH)., • Familiarity with version control and task tracking systems (e.g., Git, Jira) and modern software development workflows., • Strong technical communication skills and ability to present designs and progress to both engineers and stakeholders., • Experience with OpenCL, CUDA, or other parallel-processing frameworks is a plus., • Prior work with aerospace or defense systems and knowledge of COMSEC requirements highly desirable., • Ability to obtain a U.S. Security Clearance. COMPENSATION & BENEFITS: The starting base salary for this position ranges from $125,000 to $150,000 per year, depending on the candidate’s job-related knowledge, skills, and experience. In addition to a competitive base salary, Innoflight offers a well-rounded compensation package that includes a Profit-Sharing Bonus and a Cash Performance Bonus to reward both individual and company performance. Additional benefits include: • 401(k) with 3% company match (automatic enrollment), • Comprehensive medical, dental, vision, HSA & life insurance, • 10 paid holidays + 120 hours PTO (starting in year one), • Access to ancillary benefits such as critical illness, accident, disability, legal and pet insurance. WHY YOU’LL LOVE WORKING HERE: • Flexible Work-Life Balance: Enjoy a 9/80 work schedule with every other Friday off—whether you use it to recharge, work on a passion project, or spend time with family, the choice is yours., • Continuous Learning & Development: We’re serious about professional development. From tuition reimbursement to internal "Ask Me Anything" sessions and weekly “Lunch & Learns,” we make learning a core part of the job., • Mission-Driven Culture: We aren’t just building tech—we’re enabling the next era of space exploration. Our Culture Ambassadors help lead initiatives around inclusion, positivity, recognition, and transparency. Here, your voice is heard, your work is respected, and your individuality is celebrated. BE YOU, WITH US: At Innoflight, we are committed to fostering an inclusive and equitable workplace where everyone belongs. We recognize that great talent comes in many forms, and you don’t need to meet every requirement to bring value to our team. If this role excites you, we encourage you to apply—even if you don’t check every box. YOU SHOULD KNOW: Potential new employees must successfully complete a background check which includes criminal search, education certification and employment verification prior to hire. Applicants must be authorized to work for any employer in the U.S as you must have the ability to obtain a security clearance. We are unable to sponsor or take over sponsorship of an employment Visa. A NOTE TO STAFFING AGENCIES: Innoflight does not accept unsolicited resumes from agencies, recruiters, or any third-party sources. Any such submissions will be considered property of Innoflight, and no fees will be paid in the event a candidate is hired from an unsolicited referral. To California residents applying for this job, please read Innoflight’s CCPA Notice: https://www.innoflight.com/careers/california-consumer-privacy-act-notice-for-job-applicants. #LI-Onsite Powered by JazzHR rwDuaEGH97

Job Description The Program Manager, Business Operations leads cross-functional initiatives that improve operational efficiency, enhance organizational performance, and support strategic business objectives. This role manages large, complex programs from planning through execution, ensuring alignment across teams such as Operations, Finance, Product, IT, HR, and Executive Leadership. Additionally, Senior Program Managers may also provide leadership, mentorship, and guidance to other members of the Business Operations function and project teams. Essential Functions • Lead end-to-end program planning, execution, and delivery for high-impact business operations (including Value Creation, Compliance, Continuous Improvement and other as assigned) initiatives., • Partner with senior leadership to define program scope, objectives, milestones, and success metrics., • Coordinate cross-functional teams to ensure alignment, remove blockers, and drive execution., • Analyze operational data to identify inefficiencies, performance gaps, and opportunities for improvement., • Develop program roadmaps, timelines, status dashboards, and reporting for executive stakeholders., • Facilitate decision-making by providing insights, clear communication, and risk mitigation strategies., • Maintain detailed program documentation, including requirements, processes, and post-implementation reviews., • Lead operational change management, including training, communication, and adoption plans., • Support implementation of new tools, systems, and automation efforts that increase organizational scalability., • Track and measure program outcomes, including ROI, process improvements, and operational metrics., • Provide expertise exhibiting a depth of knowledge across operations to include operational, engineering, maintenance, system test and technical management disciplines for which they are assigned., • Work directly with the customer to determine project requirements, develop a work plan, execute the work., • Ensure projects/programs are executed to the highest level of safety and compliance., • Ensure all personnel meet/exceed professional standards and embrace the AEVEX culture., • Effectively communicate expectations and develop innovative strategies to enhance organizational capabilities that support operational priorities and requirements., • Cultivate strong relationships with peers, subordinates, and customers while providing leadership and technical advice to strategic and operational business planning., • Be an agile and adaptive leader who consistently meets challenges head-on and ensures organizational success by building effective professional relationships with senior executives and peers., • Facilitate alignment and achievement of strategy objectives and performance goals across the company., • Manage all aspects of assigned programs to include costs, schedules, and performance., • Integrate industry best practices and meet or exceed program financial goals. •, • Develop processes for identifying, assessing, monitoring and mitigating risk throughout the program life cycle., • Perform other duties as required. Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Security Clearance- Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. (Top Secret eligibility preferred), • Strong program and project management skills, with experience managing multiple concurrent initiatives., • Ability to translate complex business needs into actionable plans., • Strong analytical and data-driven decision-making capabilities., • Proficiency with project management and collaboration tools (e.g., Jira, Microsoft Project Server)., • Excellent communication, presentation, and stakeholder-management skills., • In-depth knowledge of US Military and Federal Acquisition Regulations. (preferred), • Critical thinking and problem-solving skills are essential., • Ability to develop and mentor/coach others., • Proficient in Microsoft Office suites (Excel, PowerPoint, etc.)., • Strong relationship building and negotiation skills., • Detail oriented with strong planning, organizational, project management, and analytical skills., • Demonstrates Professionalism and Integrity at all times Education / Certifications • Bachelor's degree in Business, Operations, Program Management, Strategy, or related field from an accredited University (MS or MBA preferred)., • Program Management Professional (PMP) Certification or DAWIA Level 2. Experience • 5–7+ years of experience in Business Operations, Program Management, Strategy, or related fields., • Experience with operational frameworks such as Lean, Six Sigma, or Agile., • Experience working with cross-functional teams and senior stakeholders., • Strong financial and business acumen., • Experience in A&D, SaaS, tech, or other fast-moving industries. (preferred), • Familiarity with data and analytics tools (e.g., Power BI, Tableau). (preferred) Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to sit, and to reach to use computers and other office equipment For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. The Company provides a reasonable range of compensation. Actual compensation is influenced by an array of factors including, but not limited to, skill set, level of experience, and specific location. The range of starting pay for this position is for the listed location only. Salary Range$122,200—$149,100 USD About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description The Public Company Tax Director leads all tax strategy, tax accounting, compliance, and reporting activities for the Company. This role ensures accurate financial reporting of tax positions under U.S. GAAP, maintains compliance with federal, state, and international tax laws, and partners closely with Finance, Legal, and external advisors to optimize the Company's global tax profile. This position plays a key leadership role in readiness and ongoing compliance for public-company requirements, including SOX controls and SEC-related tax disclosures. Essential Functions: Tax Accounting & Reporting (ASC 740) • Oversee preparation and review of quarterly and annual income tax provisions., • Ensure accurate deferred tax asset/liability recognition and valuation allowance assessments., • Manage tax footnote disclosures for SEC filings (Form 10-K, 10-Q, S-1 if applicable)., • Maintain strong internal controls over financial reporting (SOX 404). Tax Compliance • Lead all federal, state, local, and international tax return activities., • Manage tax audits and inquiries; respond to regulators as needed., • Ensure compliance with evolving tax legislation—including BEPS Pillar Two, state nexus expansion, and global intangible low-taxed income (GILTI). Tax Strategy & Planning • Evaluate and implement strategies to optimize effective tax rate (ETR)., • Support M&A due diligence, structuring, and post-acquisition integration., • Partner with Treasury, Legal, and FP&A to advise on business initiatives and entity structure., • Monitor emerging tax laws and model impacts to the business. Leadership & Cross-Functional Collaboration • Manage external provider relationships., • Collaborate with Accounting, Legal, HR, and Operations to ensure tax compliance across business processes., • Present tax matters, risks, and opportunities to senior leadership and the Audit Committee (as applicable)., • Perform other duties as required., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Ability to obtain and maintain a Secret Clearance Security-U.S. Citizenship required., • Deep knowledge of ASC 740, federal and state income tax rules, and SEC reporting requirements., • Strong analytical, leadership, and communication skills., • High attention to detail and commitment to accuracy., • Excellent organizational skills and the ability to manage multiple priorities in a fast-paced environment., • Familiarity with tax technology tools and ERP systems., • Directs and provides expert knowledge in the strategic function of the department., • Develops short and long-term people and organizational strategy in alignment with AEVEX goals and direction., • Leads with impact & influence. Establishes credibility, effectively persuades and develops others, and achieves important objectives collaboratively., • Identifies, recruits, and retains top-notch talent., • Champions AEVEX's culture and empowers employees to take responsibility for their jobs and goals., • Sets performance standards and encourages employee engagement and results through delegation, continuous feedback, goal setting, and performance management., • Maintains transparent communication. Appropriately communicates organization information through department meetings, one-on-one meetings, and appropriate email, and regular interpersonal communication. Education / Certifications • Bachelor's degree in accounting, Finance, or related field, • CPA strongly preferred. Experience • 10+ years of progressive tax experience, including public company experience., • Experience operating in a SOX controlled environment. Physical Requirements • While performing the duties the employee is: Physical Requirements Constantly required to sit, and to reach to use computers and other office equipment Note: For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. The Company provides a reasonable range of compensation. Actual compensation is influenced by an array of factors including, but not limited to, skill set, level of experience, and specific location. The range of starting pay for this position is for the listed location only. Salary Range$228,700—$256,500 USD About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description General information Job Title Ramp Agent AS/FT - SAN Date Thursday, April 30, 2026 Entity Unifi Aviation, LLC State California City San Diego Base Pay Rate: $ 18.00 Full/Part Time Full Time Exempt or Non-Exempt Position Non-Exempt Shift A.M. shift, P.M. shift Requirements and Description Unifi has decades of experience in the aviation services industry. We continue to innovate, adapt, and grow by leaning on our experience and expertise in airline ground services. Our vision is to be the most respected company by providing exceptional experience getting aircraft and passengers to their destination safely. We are seeking individuals to join our growing team who are passionate, have integrity, and have empathy for how their words and decisions affect our employees, customers, and partners. No experience is required. Paid training is provided for all new employees. Join our team and see where the flight benefits can take you. Job Summary: Responsible for marshalling aircraft in and out of gate, loading, unloading and sorting baggage. Also responsible for cleaning the aircraft, restocking items, de-icing aircraft, carrying out inspections, hazard checks. Operate ramp equipment such as stairs and bridges. Benefits: • Flight Privileges: Offered after 30 days for employees and eligible family members!, • Weekly pay for hourly employees (could change it specific to the state e.g. CA), • Full time starts at 30 hours per week!, • Paid time off (for full-time employees)., • Comprehensive Medical, Dental and Vision Insurance (for full-time employees)., • 401k for all employees., • Exclusive discounts and additional wellness programs. Job Duties:, • Marshall all arriving, departing, and towed aircraft on the ramp., • Perform wing walker duties to protect the aircraft wing from equipment in the path of pushback and de-ice aircraft as required., • Load, unload, sort and transfer passenger baggage, airmail, freight and company material in and out of aircraft bins, belt loaders or baggage carts., • Operate ramp equipment like bag tugs, belt loaders, aircraft tow tractors, water servicing vehicles, and lavatory servicing vehicles., • May be assigned cabin service duties like servicing the aircraft, cleaning lavatories and cabin, restocking supplies, and other items., • Adhere to all safety procedures and policies., • Perform other related duties as assigned within the appropriate skill, experience and, capabilities expected for this position., • Complete work in a safe and secure manner, following company safety and operational standards, • Immediately report safety and security incidents as well as potential hazards in line with the Unifi Fair and Just Culture Policy. Qualifications:, • High School diploma or GED., • Must be at least 18 years of age., • Must be able to obtain credentials required as per airport or state or customs requirements., • Possess a valid Driver’s License. Physical requirements:, • Must be able to frequently lift, greater than 70lbs and constantly lift up to 70 lbs; Constantly push, pull up to 70 lbs; and constantly walk, stand, reach above shoulder, climb, crawl, stoop, squat, kneel, & bend. Working conditions:, • Must be able to work in rotating shifts and hours, nights, weekends and holidays, overtime., • Must be able and open to work in outside weather conditions which may include severe seasonal elements. "Unifi is committed to equal opportunity employment regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability or veteran status."

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. This position is perfect for an individual who enjoys solving the most complex problems across a portfolio of diverse domains and modalities. An ideal candidate is expected to apply classical autonomous techniques, algorithms, and theory to various platforms in multiple tactical scenarios. These solutions are expected to be integrated into real-world problems with near-term program impacts and rewards. Shield AI is committed to developing cutting-edge autonomy for unmanned aircraft operating across all Department of Defense (DoD) domains, including air, sea, and land. We aim to push the envelope by combining traditional autonomous systems algorithms with deep reinforcement learning-based solutions to deliver unmatched capability, agility, and speed in deploying advanced technologies that support national defenseWhat you'll do: • Tactical Autonomy Design – Design tactical autonomy algorithms to enable unmanned aircraft to perform complex missions across air, land, and sea domains with minimal human supervision., • High-Performance Software Development – Develop high-performance software modules that incorporate planning, decision-making, and behavior execution strategies for dynamic and adversarial environments., • Behavior Architecture Implementation – Implement and test behavior architectures that enable multi-agent coordination, target engagement, reconnaissance, and survivability in contested scenarios., • Hybrid Autonomy Integration – Work at the intersection of classical autonomy and machine learning, blending rule-based systems with learning-based methods such as reinforcement learning to achieve robust, adaptive behavior., • Cross-Functional Collaboration – Collaborate with cross-functional teams including perception, planning, simulation, hardware, and flight test to ensure seamless integration of autonomy solutions on real-world platforms., • Deployment & Field Testing – Deploy autonomy capabilities to real platforms and participate in field tests and flight demos, validating performance in operationally relevant conditions., • Mission Data Analysis – Analyze mission logs and performance data to diagnose failures, optimize behavior models, and inform iterative development., • R&D and Roadmapping – Contribute to the autonomy roadmap by researching and prototyping new algorithms, identifying tactical capability gaps, and proposing novel solutions that advance Shield AI’s mission., • Program Support & Adaptation – Support defense-focused programs and customer needs by adapting autonomy solutions to evolving mission sets, compliance requirements, and operational feedback., • Travel Requirement – Members of this team typically travel around 10-15% of the year (to different office locations, customer sites, and flight integration events).Required Qualifications:, • BS/MS in Computer Science, Electrical Engineering, Mechanical Engineering, Aerospace Engineering, and/or similar degree, or equivalent practical experience, • Typically requires a minimum of 10 years of related experience with a Bachelor’s degree; or 9 years and a Master’s degree; or 7 years with a PhD; or equivalent work experience., • Proficiency in programming languages such as C++ and Python, and familiarity with real-time operating systems (RTOS)., • Significant background in robotics technologies related to motion planning, behavior modeling, decision-making, or autonomous system design., • Significant experience with unmanned system technologies and accompanying algorithms (specifically air domain), • Experience with simulation tools and environments (e.g., AFSIM, NGTS) for testing and validation., • Strong problem-solving skills, with the ability to troubleshoot and optimize system performance., • Excellent communication and teamwork skills, with the ability to work effectively in a collaborative, multidisciplinary environment., • Ability to obtain a SECRET clearance. Preferred Qualifications:, • Experience applying ML/RL techniques in autonomy pipelines., • Background in collaborative behaviors, swarm robotics, or distributed decision-making., • Familiarity with tactical behaviors for unmanned systems in DoD or government programs., • Work on behaviors applicable across air, ground, and maritime vehicles., • Hands-on experience supporting flight demos or live exercises., • Experience with UCI and OMS Standards#LI-ED1#LE Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description General information Job Title Ramp Agent AS/PT- SAN Date Thursday, April 30, 2026 Entity Unifi Aviation, LLC State California City San Diego Base Pay Rate: $ 18.00 Full/Part Time Part Time Exempt or Non-Exempt Position Non-Exempt Shift A.M. shift, P.M. shift Part Time Days Days of the weekShiftShift Start TimeMonday, Tuesday, Wednesday, Thursday, Friday, Saturday, SundayA.M. shift, P.M. shift Requirements and Description Unifi has decades of experience in the aviation services industry. We continue to innovate, adapt, and grow by leaning on our experience and expertise in airline ground services. Our vision is to be the most respected company by providing exceptional experience getting aircraft and passengers to their destination safely. We are seeking individuals to join our growing team who are passionate, have integrity, and have empathy for how their words and decisions affect our employees, customers, and partners. No experience is required. Paid training is provided for all new employees. Join our team and see where the flight benefits can take you. Job Summary: Responsible for marshalling aircraft in and out of gate, loading, unloading and sorting baggage. Also responsible for cleaning the aircraft, restocking items, de-icing aircraft, carrying out inspections, hazard checks. Operate ramp equipment such as stairs and bridges. Benefits: • Flight Privileges: Offered after 30 days for employees and eligible family members!, • Weekly pay for hourly employees (could change it specific to the state e.g. CA), • Full time starts at 30 hours per week!, • Paid time off (for full-time employees)., • Comprehensive Medical, Dental and Vision Insurance (for full-time employees)., • 401k for all employees., • Exclusive discounts and additional wellness programs. Job Duties:, • Marshall all arriving, departing, and towed aircraft on the ramp., • Perform wing walker duties to protect the aircraft wing from equipment in the path of pushback and de-ice aircraft as required., • Load, unload, sort and transfer passenger baggage, airmail, freight and company material in and out of aircraft bins, belt loaders or baggage carts., • Operate ramp equipment like bag tugs, belt loaders, aircraft tow tractors, water servicing vehicles, and lavatory servicing vehicles., • May be assigned cabin service duties like servicing the aircraft, cleaning lavatories and cabin, restocking supplies, and other items., • Adhere to all safety procedures and policies., • Perform other related duties as assigned within the appropriate skill, experience and, capabilities expected for this position., • Complete work in a safe and secure manner, following company safety and operational standards, • Immediately report safety and security incidents as well as potential hazards in line with the Unifi Fair and Just Culture Policy. Qualifications:, • High School diploma or GED., • Must be at least 18 years of age., • Must be able to obtain credentials required as per airport or state or customs requirements., • Possess a valid Driver’s License. Physical requirements:, • Must be able to frequently lift, greater than 70lbs and constantly lift up to 70 lbs; Constantly push, pull up to 70 lbs; and constantly walk, stand, reach above shoulder, climb, crawl, stoop, squat, kneel, & bend. Working conditions:, • Must be able to work in rotating shifts and hours, nights, weekends and holidays, overtime., • Must be able and open to work in outside weather conditions which may include severe seasonal elements. "Unifi is committed to equal opportunity employment regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability or veteran status."

Job Description Natilus is building the next generation of aviation through the development of blended-wing-body aircraft, delivering a step-change in overall efficiency. Our growing family of aircraft is designed to make air travel more sustainable while fundamentally improving the economics of commercial flight and the operational effectiveness of defense logistics. By combining advanced aerodynamics with innovative design, Natilus aircraft achieve exceptional fuel efficiency, increased payload capacity, and seamless compatibility with existing airport infrastructure. With hundreds of aircraft valued in the billions of dollars already on order, we are redefining how aircraft are designed, built, and operated, representing a meaningful evolution in modern aviation Work Summary: Natilus is seeking a Aircraft Subsystems Engineering Lead to join our team in San Diego, CA. In this role, you will contribute and lead end-to-end systems development, including requirements definition, system architecture, and technical integration across all subsystems including flight control mechanisms, propulsion, avionics, electrical and fuel systems. This role oversees trade studies, interface control, compliance, and scheduling, while providing technical leadership and mentorship to engineering team. Main Responsibilities: • Applies technical knowledge to the aircraft systems design from concept through first flight, • Provide technical leadership and oversight for the Kona systems design team, • Assign work, set priorities, and mentor engineers to ensure timely, high-quality execution, • Communicate and collaborate closely with the executive team including CEO and Head of Engineering, • Manage engineering deliverables, identify issues, and drive corrective actions as needed, • Lead and contribute to aircraft system design and analysis from concept through production, including propulsion, fuel, electrical, avionics, and flight controls Requirements • Minimum of 10 years of experience as a systems engineer or in a closely related role, • Bachelor of Science in Aerospace Engineering, Mechanical Engineering, or equivalent practical experience, • Strong foundational understanding of aircraft systems, • Familiarity with FAA Part 23 and 25 requirements, • Experience with aircraft systems test planning and execution, • Experience with turboprop powerplant installation design, • Familiarity with composite airframe design and integration, • Proficiency with NX, CATIA, or SolidWorks, • Experience with rapid prototype aircraft programs from conceptual and preliminary design through build Desired Experience: • Kickoff through production program experience, • Rapid prototype program experience, • Hands-on build experience Core Behaviors: • Build trust through ownership, transparency, and follow-through, • Communicates clearly, directly, and respectfully across teams, • Lead by example and model expected behaviors, • Ability to give and receive direct, constructive feedback, • Comfortable operating in a fast-paced, collaborative environment with evolving priorities Travel Requirements: Occasional travel and on-site work at the local hangar may be required Compensation: The expected salary range for this position is $170,000 to $195,000 annually. Actual compensation will be determined based on qualifications, relevant experience, skills, and business needs. Benefits Health Care Plan (Medica, Dental, Vision) Retirement Plan – 401k Unlimited PTO Onsite Gym Access Natilus Inc. hires solely based on qualifications, merit and competence. Natilus Inc. is an equal opportunity employer. Natilus Inc. does not hire on the basis of race, color, religion, gender, national origin/ ethnicity, veteran status, disability status, age, sexual orientation, marital status, mental or physical disability or any other legally protected status.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:Shield AI is redefining autonomous aviation with cutting-edge AI and GPS/RF-denied navigation technologies. Now, we’re building our next-generation aircraft, XBAT, like no other—one that will push the boundaries of innovation and performance. We’re looking for a Power Engineer II to contribute to the design, analysis, and validation of power electronics systems critical to our aircraft. This role is perfect for an engineer with a solid foundation in power systems who is eager to grow, own challenging projects, and see their work move rapidly from concept to flight. If you thrive in fast-paced environments, enjoy solving complex problems, and want to help build the future of autonomous aviation, we want to hear from you.What you'll do: • Design Power Electronics: Design of HV and LV systems including:-High-voltage and low-voltage power systems-DC-DC converters, inverters, and motor controllers-Battery, Battery management, power generation, and distribution-Embedded safety and protection mechanisms, • Design across power ranges: Engineer solutions from <1 kW low-power systems to >10 kW high-power applications, • Full-cycle hardware development: Own the entire flow — concept, modeling, worst case analysis, schematic capture, simulation, prototyping, design reiteration for improving design maturity, testing and validation, • PCB ownership: Drive PCB layout and design with ECAD engineers, optimizing for power density, EMI, thermal, and manufacturability, • Design for Safety, Manufacturability and Reliability: Design robust systems keeping in mind best practices for safety, manufacturing and reliability, • Board Bring Up and Testing: execute board bring up, verification, validation and HALT testing to meet rigorous aerospace reliability standards, • Cross-functional collaboration: Work closely with Mechanical, CAD, Embedded, Software, Production and various aircraft teams throughout the product lifecycle, • Design review leadership: Lead and contribute to cross-functional reviews ensuring robust, high-integrity engineering decisions, • Program execution: Manage project timelines, deliverables, and technical milestones to drive on-time, high-quality outcomesRequired qualifications:, • You have a B.S. in Electrical Engineering or equivalent, • You have 1+ years of experience as an Electrical Engineer, • You are experienced with: circuit design, schematic capture, component selection, circuit testing, and debugging, • You have a demonstrated record of working hard, being a trustworthy teammate, holding yourself and others to high standards, and being kind to others, • Familiarity with Altium or equivalent, • You have experience with lab equipment: oscilloscopes, power supplies, E-loads, multimeters, etc..#LI-JM2#LB Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Staff Aerostructures Design Engineer to support the development of structural components for our next-generation autonomous aircraft. As a key contributor on the Mechanical Engineering team, you will design and develop high-performance structural components from concept through production release. You’ll work cross-functionally to ensure structural integrity, manufacturability, and system integration across one of the most advanced autonomous aircraft platforms being built today. This role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. What you'll do: • Design and develop structural components and assemblies for Shield AI’s next-generation UAV platform, supporting both primary and secondary aircraft structures., • Execute all stages of the design lifecycle including conceptual development, initial CAD modeling, detailed design, and drawing release., • Perform hand calculations for stress or strain with limited basic FEA analysis, with guidance from senior engineers as needed., • Collaborate closely with aerodynamics, propulsion, avionics, payload, and manufacturing teams to support system integration across airframe interfaces., • Support structural validation efforts including coupon testing, subcomponent testing, and system-level verification., • Generate high-quality design documentation, drawings, interface definitions, and analysis reports in compliance with aerospace standards., • Partner with manufacturing and flight test teams to resolve build issues and support hardware through test and deployment., • Participate in design reviews and technical discussions, presenting work clearly and incorporating feedback effectively., • Continuously improve personal technical depth in structural layout, joints, fasteners, tolerancing, and structural optimization.Required qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or related discipline., • 8+ years of experience in aircraft structural design or closely related aerospace structures., • Experience designing and releasing structural components in development or production environments., • Working knowledge of composite and metallic structures, including fasteners, bonded joints, and load paths., • Proficiency in CAD tools (NX, CATIA, SolidWorks, or similar)., • Understanding of GD&T, tolerance stackups, and DFMA principles., • Strong written and verbal technical communication skills., • Demonstrated ability to operate in fast-paced, high-ownership engineering environments, • Ability to get a S//SAR level security clearance desired.Preferred qualifications:, • M.S. degree in Aerospace or Mechanical Engineering., • Experience supporting UAV, DoD, or aerospace vehicle programs., • Familiarity with aerospace standards (MIL-STD, ASME Y14.5, FAA)., • Experience supporting hardware through test, failure analysis, and design iteration., • Exposure to composite design and manufacturing methods., • Experience using FEA tools (ANSYS, Abaqus, NASTRAN, or similar) for linear structural analysis#LI-MS1#LD Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Staff Aerostructures Design Engineer to support the development of structural components for our next-generation autonomous aircraft. As a key contributor on the Mechanical Engineering team, you will design and develop high-performance structural components from concept through production release. You’ll work cross-functionally to ensure structural integrity, manufacturability, and system integration across one of the most advanced autonomous aircraft platforms being built today. This role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. What you'll do: • Design and develop structural components and assemblies for Shield AI’s next-generation UAV platform, supporting both primary and secondary aircraft structures., • Execute all stages of the design lifecycle including conceptual development, initial CAD modeling, detailed design, and drawing release., • Perform hand calculations for stress or strain with limited basic FEA analysis, with guidance from senior engineers as needed., • Collaborate closely with aerodynamics, propulsion, avionics, payload, and manufacturing teams to support system integration across airframe interfaces., • Support structural validation efforts including coupon testing, subcomponent testing, and system-level verification., • Generate high-quality design documentation, drawings, interface definitions, and analysis reports in compliance with aerospace standards., • Partner with manufacturing and flight test teams to resolve build issues and support hardware through test and deployment., • Participate in design reviews and technical discussions, presenting work clearly and incorporating feedback effectively., • Continuously improve personal technical depth in structural layout, joints, fasteners, tolerancing, and structural optimization.Required qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or related discipline., • 8+ years of experience in aircraft structural design or closely related aerospace structures., • Experience designing and releasing structural components in development or production environments., • Working knowledge of composite and metallic structures, including fasteners, bonded joints, and load paths., • Proficiency in CAD tools (NX, CATIA, SolidWorks, or similar)., • Understanding of GD&T, tolerance stackups, and DFMA principles., • Strong written and verbal technical communication skills., • Demonstrated ability to operate in fast-paced, high-ownership engineering environments, • Ability to get a S//SAR level security clearance desired.Preferred qualifications:, • M.S. degree in Aerospace or Mechanical Engineering., • Experience supporting UAV, DoD, or aerospace vehicle programs., • Familiarity with aerospace standards (MIL-STD, ASME Y14.5, FAA)., • Experience supporting hardware through test, failure analysis, and design iteration., • Exposure to composite design and manufacturing methods., • Experience using FEA tools (ANSYS, Abaqus, NASTRAN, or similar) for linear structural analysis#LI-MS1#LD Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:Shield AI is seeking a Senior Staff Structural Design Engineer to play a critical role in the development of structural components for our next-generation autonomous aircraft. As a senior member of the Mechanical Engineering team, you will own the design and development of high-performance structural systems, from clean-sheet concepts to production-ready hardware. You’ll work across disciplines to ensure structural integrity, manufacturability, and mission-readiness in one of the most advanced autonomous aircraft platforms being built today. This role is ideal for an experienced aerospace mechanical engineer who thrives in fast-paced, high-ownership environments and is passionate about building systems that matter.What you'll do: • Lead the design and development of structural components and assemblies for Shield AI’s next-gen UAV platform, with a focus on primary and secondary aircraft structures., • Own the structural design lifecycle including concept generation, CAD modeling, detail design, and drawing release, ensuring high quality and traceability., • Use FEA tools to perform and guide linear and nonlinear structural analysis, stress analysis, and margin assessment under operational loads and edge cases., • Work closely with aerodynamics, propulsion, avionics, payload, and manufacturing teams to ensure seamless system integration across airframe and subsystem interfaces., • Support and lead efforts in material selection, focusing on composites, aluminum alloys, and advanced manufacturing approaches suited to mission and environment., • Participate in and lead design reviews, architecture discussions, and technical decision-making forums related to structural systems., • Oversee the design and execution of structural validation testing, including coupon-level, subcomponent, and full-system testing., • Guide the development of design documentation, analysis reports, interface definitions, and verification plans in compliance with MIL-STD, FAA, and internal Shield AI standards., • Mentor junior engineers and review team members’ work for technical rigor, performance, and manufacturability., • Collaborate with the manufacturing and flight test teams to transition designs from engineering to production and field deployment., • Identify opportunities to improve design processes, configuration management, and team workflows for increased engineering velocity and design quality.Required qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or a related discipline., • 10+ years of experience in aircraft structural design, with demonstrated ownership of components or systems in development, test, or production., • Deep understanding of composite and metallic structures, including material behavior, joints, and thermal/environmental effects., • Expertise in CAD tools (NX, CATIA, or SolidWorks) and FEA tools (ANSYS, Abaqus, NASTRAN, or similar)., • Experience conducting or overseeing stress analysis, fatigue analysis, and design optimization., • Strong working knowledge of DFMA, GD&T, tolerance stackups, and structural layout principles., • Clear, concise technical communication skills and experience leading cross-functional engineering efforts., • A track record of technical excellence, high ownership, and a mission-driven mindset in challenging engineering environments.Preferred qualifications:, • M.S. degree in Aerospace or Mechanical Engineering., • Strong NX CAD skills, • Experience supporting or leading Group 3–5 UAV, DoD aircraft, or high-performance aerospace vehicle programs., • Knowledge of aerospace standards (MIL-STD, ASME Y14.5, FAA FARS) and certification pathways., • Prior experience in flight vehicle integration, manufacturing liaison, or production support., • Familiarity with model-based engineering, digital twin development, or configuration management tools., • Demonstrated experience in failure analysis, design iteration, and test correlation., • Previous work in startup, R&D, or high-growth defense environments where agility and innovation are key.#LI-MS1#LE Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Opportunity for advancement, • Paid time off About Mimir Engineering Mimir Engineering is a precision engineering service provider with a team that spans multiple disciplines and backgrounds. We work across a broad industry base with a specific focus on the end-to-end development of aerospace optical systems and capabilities in design, analysis, and manufacturing (i.e. AI&T). We enjoy the technical and team-building aspects of tackling the most challenging engineering problems. SENIOR ENGINEER Essential Functions • Design and develop assemblies and sub-systems for a diverse range of applications such as remote sensing, communications, data analytics, defense, etc., • Develop innovative technical solutions to meet performance and survivability requirements of hardware, • Design, build, and test prototypes, flight hardware, and ground support equipment (GSE) as necessary, • Drive appropriate system sizing and design/selection of components using engineering judgement and detailed knowledge of fundamentals, including the use of classical hand calculations and finite element modeling (FEM), • Create detailed engineering documentation (CAD models, drawings, BOMs, reports, instructions, presentations, etc.) as necessary to support project needs, • Provide expert guidance to clients and other staff members working on difficult technical problems, • Anticipate future engineering needs and the modifications required to accomplish a technical goal, • Work on projects independently and/or with a multi-disciplined team, • Effectively manage multiple tasks and juggle multiple projects, • Mentor and assist junior engineers, • Collaborate with others in the development of project plans, proposals, and schedules, • Prepare slides for and present in customer design reviews and meetings as required, • Perform other duties as assignedRequired Qualifications and Desired Skills, • Bachelor’s or master’s degree in mechanical engineering or related technical discipline, • 8 years of experience in opto-mechanical design or other precision mechanical design, • Demonstrated understanding of optical integration techniques and considerations, • Ability to assist, independently perform, and/or delegate work tasks, • Strong communication, presentation, and interpersonal skills, • Proficiency with SolidWorks (CAD & simulation), Matlab, and Zemax, • Prior experience in a consulting environment is a plus, • Ability to understand new concepts quickly and apply them accurately in an evolving environment, • Proactive approach to problem solving in a collaborative work environment, • Must be a U.S. Person (U.S. Citizen or Legal Permanent Resident), • Ability to work extended hours and travel as required Flexible work from home options available.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Staff Aerostructures Design Engineer to support the development of structural components for our next-generation autonomous aircraft. As a key contributor on the Mechanical Engineering team, you will design and develop high-performance structural components from concept through production release. You’ll work cross-functionally to ensure structural integrity, manufacturability, and system integration across one of the most advanced autonomous aircraft platforms being built today. This role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. What you'll do: • Design and develop structural components and assemblies for Shield AI’s next-generation UAV platform, supporting both primary and secondary aircraft structures., • Execute all stages of the design lifecycle including conceptual development, initial CAD modeling, detailed design, and drawing release., • Perform hand calculations for stress or strain with limited basic FEA analysis, with guidance from senior engineers as needed., • Collaborate closely with aerodynamics, propulsion, avionics, payload, and manufacturing teams to support system integration across airframe interfaces., • Support structural validation efforts including coupon testing, subcomponent testing, and system-level verification., • Generate high-quality design documentation, drawings, interface definitions, and analysis reports in compliance with aerospace standards., • Partner with manufacturing and flight test teams to resolve build issues and support hardware through test and deployment., • Participate in design reviews and technical discussions, presenting work clearly and incorporating feedback effectively., • Continuously improve personal technical depth in structural layout, joints, fasteners, tolerancing, and structural optimization.Required qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or related discipline., • 8+ years of experience in aircraft structural design or closely related aerospace structures., • Experience designing and releasing structural components in development or production environments., • Working knowledge of composite and metallic structures, including fasteners, bonded joints, and load paths., • Proficiency in CAD tools (NX, CATIA, SolidWorks, or similar)., • Understanding of GD&T, tolerance stackups, and DFMA principles., • Strong written and verbal technical communication skills., • Demonstrated ability to operate in fast-paced, high-ownership engineering environments, • Ability to get a S//SAR level security clearance desired.Preferred qualifications:, • M.S. degree in Aerospace or Mechanical Engineering., • Experience supporting UAV, DoD, or aerospace vehicle programs., • Familiarity with aerospace standards (MIL-STD, ASME Y14.5, FAA)., • Experience supporting hardware through test, failure analysis, and design iteration., • Exposure to composite design and manufacturing methods., • Experience using FEA tools (ANSYS, Abaqus, NASTRAN, or similar) for linear structural analysis#LI-MS1#LD Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.