Trabajos industrial engineering en New Rochelle, New YorkCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications, • Familiarity with enterprise maintenance KPIs and executive reporting cadence Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

Job Description 'We are seeking a skilled Machine Shop Foreman to oversee our manufacturing operations at our facility in the United States. This pivotal role involves managing production teams and ensuring the delivery of high-quality machinery that meets our company’s standards and customer expectations. Join us in shaping the future of industrial processing solutions. Responsibilities Supervise daily shop operations to ensure efficient production workflows. • Coordinate with engineering and quality control teams to maintain high standards., • Manage staff schedules, training, and performance evaluations., • Oversee maintenance of machinery and tools to minimize downtime., • Implement safety protocols in compliance with OSHA regulations., • Collaborate with procurement to ensure timely availability of materials., • Maintain accurate production records and report on operational metrics., • Drive continuous improvement initiatives within the shop environment., • Qualifications, • ', • Proven experience as a Shop Foreman or similar leadership role in manufacturing., • Strong knowledge of machining, fabrication or assembly processes and equipment., • Excellent management and team leadership skills., • Familiarity with OSHA safety standards., • Ability to read schematics and blueprints effectively., • Strong problem-solving skills and attention to detail., • Effective communication skills for coordinating with teams and vendors.' If you are ready to lead a dynamic team, at a growing company in a very attractive segment and market, we invite you to bring your expertise to American. Pay: From $70,000.00 per year Company DescriptionAs a leading manufacturer of vehicle wash systems in the heavy-duty vehicle and car wash industry, American Car Wash Solutions has the expertise and experience to guarantee both exceptional and environmentally sustainable results for your next stainless steel conveyorized car wash.As a leading manufacturer of vehicle wash systems in the heavy-duty vehicle and car wash industry, American Car Wash Solutions has the expertise and experience to guarantee both exceptional and environmentally sustainable results for your next stainless steel conveyorized car wash.

Please note: This is not an IT or Software Support role. This position focuses on hardware support for WAZER waterjet machines. Candidates should have experience with mechanical systems, hardware maintenance, or machine operation. WHY WE NEED YOU: WAZER is the creator of the world’s first desktop waterjet cutter. We’ve brought industrial-grade precision to the workshops of designers, engineers, and makers everywhere.We are looking for a Technical Support Representative who is curious, mechanically inclined, and eager to help our customers turn their designs into usable parts. We are looking for energetic, adaptable and clever team members that can think on their feet to solve problems that pop up as well as work to continuously improve our systems and processes. YOUR DAILY ROLE: As a Tier 1 Technical Support Representative, you are the face and voice of WAZER. You are the first line of defense, helping our community of makers, educators, and engineers set up their machines and troubleshoot initial challenges. This role is split between two main focuses: first is to provide Technical Support to WAZER Users, while the second is to grow your knowledge of the WAZER by maintaining test setups in the WAZER testing program. The majority of your day will be interacting with customers to help troubleshoot and resolve issues. TECHNICAL SUPPORT DAILY ROLE • Troubleshoot common issues related to cutting quality, machine setup, and component failure, • Provide email, telephone and video technical support for customers in aspects such as hardware, software and workflow., • Guide customers through our online library of resources to empower them to solve problems independently., • Document customer interactions in our support system to ensure a seamless hand-off if an issue needs to be escalated., • Process replacement part orders and coordinate with the operations team to ensure customers get what they need to keep cutting., • Work with Product Development engineers to develop short term and long term solutions, • Identify gaps in our customer-facing documentation and suggest improvements to the team., • Deescalate sensitive situations with customers., • Maintain an inventory of parts and machines in the warehouse. WAZER TEST PROGRAM DAILY ROLE • Maintain test rigs in operation and proactively improve test setups, • Collect and record data in a thorough and organized manner, • Work with Product Engineers to understand failures that arise, • Maintain an organized work and file space AD-HOC RESPONSIBILITIES • Aid the Warehouse department to prepare machines for processing, • Aid in the refurbishment of machines, • Packaging replacement machines for customers as needed, • Maintain inventory of relevant parts MUST HAVE QUALIFICATIONS: • 1+ years in a customer-facing role (Support, Retail, or Service), with hardware or technical products is a major plus., • Must have experience regularly repairing and maintaining electromechanical systems, • Must be a quick learner when it comes to mechanics, • A systematic and process oriented thinker and not solution minded, • Strong technical and written communication skills, • Fast typer and very comfortable navigating the MS and Google suites, • Comfortable leading feedback sessions with other team members and enjoy a good brainstorm session, • Well-organized and willing to work independently and a strong sense of personal organization, • Familiarity with 2D CAD - can open and manipulate an existing sketch, • Comfortable with at least one digital manufacturing tool: laser cutter, plasma cutter, 3d printer, or cnc mill., • Ability to commute to Yonkers, NY, • Ability to lift heavy (~60lbs) objects alone and team lift heavy (~120lbs) objects with another person, • Don’t mind getting your hands dirty NICE TO HAVE QUALIFICATIONS: • Have worked with CRM systems (zendesk, salesforce, etc), • You are a maker, a hacker, a craftsperson, tinkerer, or generally curious and creative, • Can break down a system and identify what makes it work the way it does, • Degree/Experience in a technical area, for example architecture, engineering, industrial design, science, and metalworking, etc., • Highly functional at 2D CAD, • Trade or technical background, • Website Editing skills (squarespace blog pages), • Passion about WAZER’s mission of bringing affordable digital cutting solutions to makers, small business, artisans, and schools. While it would be great to bring on experienced talent for this role, we’ll accept any qualified candidate. If you are passionate about our mission, are good at what you do, and want to learn quickly don’t hesitate to contact us. Be open about what you don’t know and what you excel at, and we’ll do our best to evaluate this with our specific needs! COMPENSATION: Employee Health Insurance, Paid Vacation, Paid Holidays, Paid Sick Days, Opportunities for Overtime, WAZER equity (stock options), Opportunity for advancement in a fast-growing company.

About NYC Health + Hospitals NYC Health + Hospitals is the largest public health care system in the United States. We provide essential outpatient, inpatient and home-based services to more than one million New Yorkers every year across the city’s five boroughs. Our large health system consists of ambulatory centers, acute care centers, post-acute care/long-term care, rehabilitation programs, Home Care, and Correctional Health Services. Our diverse workforce is uniquely focused on empowering New Yorkers. At NYC Health + Hospitals, our mission is to deliver high quality care health services, without exception. Every employee takes a person-centered approach that exemplifies the ICARE values (Integrity, Compassion, Accountability, Respect, and Excellence) through empathic communication and partnerships between all persons. Work Shifts 8:00 A.M – 4:00 P.M Duties & Responsibilities Purpose of Position: Under the general supervision of the Director, Engineering and Support Services, assists in directing programs to manage building maintenance, grounds, and equipment and procurement or generation of utilities and their distribution systems. Formulates and evaluates programs and projects and supervises functional programming activities. Ensures ongoing compliance with NYC Health + Hospitals and relevant health care setting policies, and other appropriate regulatory requirements. Essential Duties and Responsibilities: 1. Directs, coordinates, and maintains control over project assignments and related activities including in-house construction, renovation, and engineering activities. Follows standard methods and procedures for the implementation of maintenance systems and operations, construction contracts, and/or capital projects development. 1. Assists in the direction of trade staff through the development processes and procedures for the implementation of maintenance operations, construction contracts, and capital projects. Assists the Director in identifying staffing needs to support service delivery. 1. Prepares reports, develops and prepares engineering management audits, studies and surveys for the Director, and/or other senior management, detailing proposed new programs, statistical studies, and health care setting planning. 1. Assists in the collection of data and preparation of reports that outline the scope and estimated cost of projects proposed, implemented and developed. Organizes staff meetings, reviews capital and expense budget submissions and provides recommendations regarding proposed projects and programs. May represent the Director in budget meetings. 1. Plans and implements programs to establish performance standards to achieve increased productivity and accountability of trade staff. Reviews and evaluates existing programs, services, policies and procedures. 1. Provides departmental orientation, training and guidance to staff. Conducts in-service training programs, continually assessing staff training needs; suggests changes to Director to provide more efficient operations., 2. Coordinates efforts and cooperates with departmental leadership on matters of mutual concern and extends functional guidance and assistance. Meets with health care setting clients and staff to plan, prioritize, coordinate and/or communicate programs and policies, as needed. 1. May provide consultative services to senior leadership or liaise with Federal, State, and City agencies on matters pertaining to engineering, construction, design projects and/or other engineering support programs and functions., 2. In the Director’s absence, may represent the System in certain legal matters dealing with State, City, and Federal agencies., 3. Performs other related duties, as directed. Minimum Qualifications 1. Bachelor’s Degree from an accredited college or university in Engineering, Architecture, Construction Management, Construction Engineering or a related discipline; and two (2) years of responsible-level experience in project, facilities or construction management, capital project planning, development, and design or other related experience in a hospital or health care setting; or, 2. High school diploma or its educational equivalent, approved by a State’s Department of Education or a recognized accrediting organization; and six (6) years of experience, as described in 1 above. Special Note: Valid license and current registration as a Professional Engineer or Architect issued by the New York State Education Department (NYSED) or a related Master’s Degree can be substituted for one (1) year of experience. Department Preferences EDUCATION • Bachelor's degree in Architecture, Engineering, Industrial Engineering, Construction Management or an approved related discipline from an accredited college or university YEARS OF EXPERIENCE • Five years of experience in Construction, Design, Engineering or related fields in a health care environment, including three years in a supervisory capacity KNOWLEDGE, SKILLS, ABILITIES and OTHER REQUIREMENTS • Knowledge and understanding of healthcare building and mechanical, structural and electrical systems., • General knowledge and expertise in NFPA, TJC, CMS, EPA and OSHA Codes and regulations, • Ability to meet established goals and objectives, • Must have the ability to read, comprehend and transmit detailed instructions orally and in writing., • Should have knowledge of CMMS Systems.

Join Atlas Air Worldwide. Move the World with Us! At Atlas Air Worldwide, we're not just an airline, we're a global engine powering cargo, passenger, and leasing operations across more than 70 countries. As a leader in outsourced aviation logistics, we're built on a foundation of safety, service excellence, integrity, innovation, teamwork, and responsibility. With over 30 years of history, a modern all-Boeing fleet, and nearly 5,000 teammates collaborating across operations, technical, and corporate functions, we're driven by purpose. If you're ready to grow, innovate, and help us deliver excellence every single day, you belong here. Position Summary: Atlas Air is seeking a detail-oriented and analytical Network Planning Analyst to help optimize our global cargo network. This role plays a critical part in the 2-year to 11-day planning window, driving insights that enable operational teams to execute the most efficient and reliable schedules. The successful candidate will provide actionable analysis on network delays, utilization trends, and operating performance, build models and reports to govern network operating parameters, and contribute to the development and implementation of software optimization tools that improve reliability and streamline planning processes. This position requires strong analytical skills, a proactive approach to problem-solving, and the ability to translate data into operational strategies that protect service quality and maximize network efficiency. Values and Behavioral Standards: To ensure the effective communication and application of company values and behavioral standards, as stated in our company "Code of Conduct" policy, and to respond appropriately in the event of deviations. The employee is expected to adhere to all company policies and to act as a role model in the adherence to company policies. Major Job Accountabilities: • Analyze and Monitor Network Performance, • Track and assess network delays, capacity utilization, and operating constraints to identify opportunities for efficiency gains and reliability improvements., • Develop and maintain key performance indicators (KPIs) for network operations and planning effectiveness., • Modeling & Optimization, • Build and maintain predictive models to assess scheduling scenarios and network performance under varying conditions., • Support the design, testing, and implementation of software optimization tools to enhance operational decision-making., • Reporting & Governance, • Develop periodic performance and reliability reports for customers, assisting in presentation creation, • Produce regular and ad hoc reports to monitor compliance with established operating parameters., • Establish data-driven processes to govern scheduling rules, protect operational integrity, and ensure alignment with reliability targets., • Cross-Functional Collaboration, • Partner with Operations, Planning, and Technology teams to integrate analytics into network planning and execution., • Provide insights that inform schedule adjustments, fleet utilization, and contingency planning., • Innovation & Continuous Improvement, • Identify opportunities to streamline workflows and automate recurring analyses., • Contributes to the development of new planning methodologies and tools that enhance decision-making and operational agility. Qualifications: • Bachelor's degree required in Industrial Engineering, Operations Research, Applied Mathematics, Data Science or related quantitative discipline or equivalent work experience., • 10 years of experience in strategy, operations planning, finance or continuous improvement, ideally with airline network planning, • Proficiency in SQL (Python and R are a plus) for data extraction and analysis; experience building decision-support tools, reporting tools dashboards (e.g., Tableau, Power BI), • Strong analytical skills with experience in statistical analysis, modeling, and scenario evaluation., • Strong problem-solving skills with the ability to work in a fast-paced, dynamic environment., • Excellent communication skills with the ability to convey complex analytical findings to non-technical stakeholders., • A proactive, solution-focused mindset with a passion for operational excellence and continuous improvement., • Knowledge of operations, scheduling, and capacity planning, ideally in airlines, transportation or other complex network operations #GH19 #LI-Hybrid #LI-20 The Company is an Equal Opportunity Employer. It is our policy to afford equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, citizenship, place of birth, age, disability, protected veteran status, gender identity or any other characteristic or status protected by applicable in accordance with federal, state and local laws. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law document by clicking "_" . To view our Pay Transparency Statement, please click here: _ Competitive compensation will be offered based on a variety of factors, including a candidate's experience, skills, education, geographic location, internal equity and other factors. In addition, a range of benefits to include medical, dental and vision insurance, employee assistance program, as well as generous paid time off, and 401K contributions are offered as a part of the total compensation package. Pay Range$191,000—$258,000 USD AtAtlas Air Worldwide, we believe in the power of people, the promise of innovation, and the responsibility we hold to each other, to our customers, and to the planet. Join us and be part of a team that lifts more than cargo; we lift ambition.

The NewYork Power Authority is a dynamic organization known for our innovative projects and collaborative work environment and are passionate about developing and delivering sustainable infrastructure solutions. The Engineering team is looking for a Mechanical Engineer II to play an important role in the design, planning and implementation of energy infrastructure projects. The successful candidate will manage engineering work tasks primarily related to power generation facilities. This includes project roles both independently and collaboratively leading research, design, and commissioning activities focused on improving NYPA's energy services. The successful candidate will ensure code compliance, quality assurance and control, cost, safety, reliability, schedule timeliness, and performance throughout all activities and deliverables. To deliver a successful project outcome, the successful candidate will analyze the design effectiveness and functional reliability of projects. The successful candidate will be part of the team responsible for implementing decarbonization, energy efficiency and clean energy technology projects at NYPA facilities related to mechanical infrastructure including rotational, thermal and fluid, refrigeration, fire protection, and process systems. The successful candidate will demonstrate experience with feasibility evaluations, designing, permitting, cost benefit analysis, construction, and commissioning of complex interdisciplinary mechanical energy efficiency projects in urban and rural environments. • Provide lead engineer function in support of a wide range of design modification projects, equipment applications and failure research, engineering studies, and operations and maintenance activities., • Perform site visits to complete field condition assessments, and equipment evaluations and develop technical recommendations with moderate complexity., • Perform occasional emergency response, including outside of normal business hours., • Independently coordinate cross disciplinary activities for the successful development and execution of projects., • Select and apply codes, standards and procedures to work tasks appropriately., • Perform evaluations to ensure engineering requirements and Authority specifications are satisfied., • Provide technical leadership in state-of-the-art engineering and analytical techniques., • Review designs, calculations, specifications, and reports produced by other internal engineers and external consultants., • Provide direction and review for the mechanical design and drafting personnel in the development of project drawings (site-based)., • For assigned work and projects, provide supervision of maintenance department(s) staff, and contractors, and prepare and monitor the day-to-day work activities of the crafts. Work with planners in scheduling work activities; oversee the safety of employees. Review job packages to ensure they are complete and current prior to performance of the work. Review completed work, job packages, and work orders to verify all steps are complete and to ensure that all data/information is recorded., • Proficient in the design, operation and maintenance of mechanical systems specific to the electric utility industry and power system components with projects related to power generating plant and substation facilities (site-based). (site-based), • Working knowledge of mechanical - commercial and industrial facilities and their various systems and components]., • Ability to apply diverse technical principles and practices, with the understanding of the NYPA's policies, operations and objectives, to engineering deliverables., • Working knowledge of applicable codes, standards, regulations., • Strong verbal and written communication skills., • Collaborative and team-oriented with ability to build relationships with vendors and stakeholders., • Ability to coordinate the technical and commercial aspects of projects., • Ability to perform engineering calculations, and complete specifications, scopes of work, reports, and interdisciplinary design packages., • Competent in the use of Microsoft Office applications., • Working experience with a Mechanical design or forecasting software preferred (site-based)., • Ability to effectively manage and prioritize multiple projects., • Proficient in the design, operation and maintenance of , mechanical systems for commercial and industrial facilities and their various systems and components (Customer-based)., • Bachelor of Science Degree in Mechanical Engineering, or equivalent, from an accredited college or university., • Minimum of eight (8+) years of work-related experience., • New York State Engineer in Training certification preferred., • Approximately 10% travel primarily within NY State., • Ability to access all areas of the plant and conduct physical evaluations of grounds and equipment including ability to work at high elevations. Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $129,000-$161,100. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

Job Description General Summary Operates, maintains and repairs an operational engineering plant which provides a facility with such services as heat, air-conditioning, steam, and emergency power. Performs preventative and corrective maintenance on plant equipment. Operates one or more boilers, chillers, generators and associated equipment to produce steam, chilled water and electrical power for the facility. Essential Duties and Responsibilities • Observes and interprets reading on gauges and meters which register various aspects of boiler operations and the Central Energy Plant (CEP) Operations., • Adjusting controls to ensure safe and efficient operations of the plant that meets the demands for the utilities provided., • Logs the various aspects of the system’s operation, keeping the boilers, chillers, machinery and other system equipment in good working order., • Maintains the log, in which various aspects of plant operations are recorded., • Required to be skilled in the repair of rotating machinery, steam systems, compressed gases and water treatment systems, (i.e., clean, oil, repair or assist in repairs to plant equipment)., • Must be fully knowledgeable of the required actions in the event of the loss of any of the regularly supplied utilities services., • Treatment of cooling tower and boiler water with chemicals and analyze the water for such things as acidity, conductivity, hardness, biological growth and alkalinity., • Maintain the general cleanliness and appearance of the Plant., • Must be knowledgeable in troubleshooting, disassembling, tube cleaning and reassembling of industrial sized boilers and chillers., • Assists others as part of the maintenance team as required and performs other duties assigned according to personal qualifications., • Other duties as assigned. Knowledge, Experience and Skill Requirements • Excellent oral and written communication skills., • Knowledge of computer software programs to include Word, Excel, Power Point and Outlook required., • Experience with a Facility Computerized Maintenance Management System software (CMMS) highly desired., • High School Graduate, technical or trade school certificate in related field desired., • Previous experience in operating and maintaining industrial sized boilers, chillers and associated equipment., • Shall possess a current Stationary Engineer’s license from a city, state, or nationally recognized entity or obtain within 2 years of employment for high pressure steam plant operation. Work Environment • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. We maintain a drug-free workplace and perform pre-employment substance abuse testing. CBRE Government and Defense is thrilled at the opportunity for you to apply to one of our roles. The rate for this position is $49.94. This position may also be eligible for a wide range of benefits based on applicable bargaining unit agreements. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.

Position Overview: InnoActive Group are leaders in providing project management and technology advisory primarily in public agencies and Fortune 500 entities. InnoActive Group has managed various construction and technology projects ranging in size from small projects to multi-billion-dollar capital programs. We are seeking a highly motivated and detail-oriented Technology Analyst to support our construction and project operations teams. This role is ideal for candidates with experience supporting construction technology platforms, project reporting, and operational systems within construction, infrastructure, utilities, energy, or industrial environments. The ideal candidate will have hands-on experience with Power BI reporting and analytics, while also serving as a key administrator and support resource for Procore and other project technology systems. This individual will work closely with project managers, field teams, operations leadership, and stakeholders to improve reporting visibility, streamline workflows, and support project execution through technology solutions. Key Responsibilities: • Serve as the primary administrator and support resource for Procore, including user management, permissions, workflows, document control, and system configuration., • Support implementation, maintenance, and optimization of construction technology platforms and project management systems., • Assist project teams with troubleshooting system issues, user support, training, and platform adoption., • Collaborate with operations, project management, and field teams to improve technology utilization and project workflows., • Develop, maintain, and enhance Power BI dashboards, reports, and data visualizations for project and operational reporting., • Analyze project, financial, scheduling, and operational data to provide actionable insights and performance tracking., • Work with internal stakeholders to gather reporting requirements and build scalable reporting solutions., • Support data integrity, validation, and reporting consistency across multiple systems and platforms., • Assist with improving project reporting processes, automation opportunities, and workflow efficiencies., • Support integration and coordination between Procore, ERP systems, scheduling platforms, and reporting tools., • Maintain organized project data, system documentation, user guides, and reporting standards., • Support onboarding of new users and maintain system governance standards., • Ensure project documentation and technology processes align with company procedures and operational standards., • Support data security, user access management, and compliance with company technology policies. Requirements: • Bachelor’s degree in Information Systems, Construction Management, Business, Engineering, Data Analytics, or a related field preferred., • 3+ years of experience supporting construction technology systems, project controls, operations reporting, or related functions., • Experience with Power BI, including dashboard development, reporting, and data visualization., • Experience with Procore administration or strong willingness and aptitude to learn and manage the platform., • Experience supporting construction, infrastructure, utilities, energy, engineering, or industrial project environments preferred., • Strong understanding of project documentation, reporting workflows, and operational processes., • Experience with Microsoft Excel, Office Suite, and data/reporting tools., • Experience with ERP systems, project management software, or scheduling platforms is a plus., • Strong communication, organizational, analytical, and problem-solving skills., • Ability to manage multiple priorities and support fast-paced project environments. If you are a results-driven, analytical thinker with a passion for ensuring successful project delivery, then we want to hear from you. Apply now to join our team as a Technology Analyst and contribute to delivering solutions that make a difference in the lives of our customers. We offer a competitive salary and benefits package, along with opportunities for professional development and advancement. InnoActive Group is an equal opportunity organization and will not tolerate discrimination based on age, ethnicity, ancestry, gender, national origin, disability, race, size, religion, sexual orientation, socioeconomic background, or any other status prohibited by applicable law. InnoActive Group participates in e-Verify.

Please note: This is not an IT or Software Support role. This position focuses on hardware support for WAZER waterjet machines. Candidates should have experience with mechanical systems, hardware maintenance, or machine troubleshooting. WHY WE NEED YOU: WAZER is the creator of the world’s first desktop waterjet cutter. We’ve brought industrial-grade precision to the workshops of designers, engineers, and makers everywhere. As we continue to grow, we are looking for a Technical Support Engineer who is passionate about solving complex mechanical puzzles and facilitating excellent user experience. We are looking for energetic, adaptable and clever team members that can think on their feet to solve problems that pop up as well as work to continuously improve our systems and processes. YOUR DAILY ROLE: As a Tier 2 Technical Support Engineer, you are the bridge between our users and our engineering team. You will handle challenging technical escalations involving component failure, cut quality concerns, and monitor recurrence of issues to determine which should be escalated to the Product Development team. Beyond helping users to fix their machines, you will be a systems architect for our support department, identifying bottlenecks and implementing the tools and workflows necessary to make our support system run as efficiently as our waterjets. TECHNICAL SUPPORT ENGINEER DAILY ROLE: • Diagnose and troubleshoot hardware, software, and firmware issues remotely via email, phone calls, and video calls to guide users through mechanical repairs, • Act as the primary escalation point for complex technical issues that Tier 1 cannot resolve., • Act as the first level of support for our Reseller Network, • Deescalate sensitive situations with users, • Document user problems and the actions taken to solve them and update troubleshooting procedures accordingly, • Work with Product Development engineers to develop short term and long term solutions, • Develop proactive web support content to help users solve common issues you’ve seen repeatedly, • Manage and optimize our support systems to improve quality of support and response times, • Maintain an inventory of replacement parts in our warehouse AD-HOC RESPONSIBILITIES • Warehouse duties related to machines coming in for testing, • Aid in the refurbishment of machines, • Overseeing the machine replacement process, • Maintain inventory of relevant parts MUST HAVE QUALIFICATIONS: • 3+ years in a customer-facing technical support or field service role, ideally dealing with complex hardware (CNC, 3D printers, robotics, or industrial machinery)., • Comfortable communicating with non-technical users to explain complex technical troubleshooting and repair, • Technical proficient verbal and written communication skills - an ability to translate "Engineering-speak" into clear instructions for a user, • Proficiency in mechanical assembly, electronics troubleshooting (multimeters, wiring diagrams), and software/firmware root cause analysis, • You don't just fix the problem; you want to know why it happened and how to prevent it going forward, • Well-organized and willing to work independently with a strong sense of personal organization., • Familiarity with 2D CAD - can open and manipulate an existing sketch, • Ability to lift heavy (~60lbs) objects alone and team lift heavy (~120lbs) objects with another person, • Ability to commute to Yonkers, NY, • Don’t mind getting your hands dirty NICE TO HAVE QUALIFICATIONS: • Digital content creation, • Experience maintaining Inventory in a warehouse setting, • Have worked with CRM systems (zendesk, salesforce, etc), • You are a maker, a hacker, a craftsperson, tinkerer, or generally curious and creative, • Degree/Experience in a technical area, for example architecture, engineering, industrial design, science, and metalworking, etc., • Highly functional at 2D CAD, • Trade or technical background, • Passion about WAZER’s mission of bringing affordable digital cutting solutions to makers, small business, artisans, and schools. While it would be great to bring on experienced talent for this role, we’ll accept any qualified candidate. If you are passionate about our mission, are good at what you do, and want to learn quickly don’t hesitate to contact us. Be open about what you don’t know and what you excel at, and we’ll do our best to evaluate this with our specific needs! COMPENSATION: Employee Health Insurance, Paid Vacation, Paid Holidays, Paid Sick Days, Opportunities for Overtime, WAZER equity (stock options), Opportunity for advancement in a fast-growing company.

Job Description The Systems Engineer is the connective tissue between Allied Maker's teams and the tools they rely on: NetSuite, Autodesk Fusion, Wrike, the custom WMS, and the integrations that tie them together. This role goes beyond administration. The Systems Engineer is an integrator of design, planning, and operations, someone who understands how a fixture flows from design through shipping and builds systems that make that flow faster, cleaner, and more measurable. They refine workflows, build automations, and help leadership see team targets clearly. Key Responsibilities Platform Administration • Own day-to-day administration of NetSuite (items, BOMs, work orders, inventory, POs, reports, saved searches, roles), Autodesk Fusion / Fusion Manage, and Wrike, • Maintain user access, permissions, and licenses across platforms; manage onboarding/offboarding, • Ensure the custom WMS remains well-integrated with NetSuite and reflects physical operations accurately Integration & Automation • Build and maintain integrations between NetSuite, Fusion, Wrike, and the custom WMS, • Design automations (SuiteFlow/SuiteScript, Wrike automations, webhooks, scheduled jobs) to reduce manual handoffs, • Partner with Design, Manufacturing, and Operations to identify high-impact automation opportunities Workflow Design & Team Targets • Translate real-world workflow (design → engineering → vendor → receiving → finishing → assembly → ship) into system workflows and stage gates, • Build dashboards and reports that surface team targets, lead times, and bottlenecks, • Partner with department leads to refine status fields, definitions of done, and handoff protocols Reliability & Change Management • Document system configurations and changes; manage release processes for customizations, • Train teams on workflows and provide Tier-2 support for system issues, • Evaluate and implement new tools, modules, or integrationsRequired Qualifications, • Bachelor's degree in Systems Engineering, Industrial Engineering, Computer Science, or related field (or equivalent experience), • 3–5 years of experience administering and extending NetSuite in a manufacturing or inventory-driven environment, • Working knowledge of Autodesk Fusion / Fusion Manage and Wrike (or similar tools), • Proven ability to design workflows and build automations, • Familiarity with SQL, SuiteScript, or similar scripting tools, • Strong communication skills and ability to translate operational needs into system solutionsPreferred Qualifications, • NetSuite SuiteScript 2.x or Administrator certification, • Experience integrating a custom WMS with NetSuite, • Experience with iPaaS tools (Celigo, Workato, Boomi, Zapier), • Background in manufacturing or make-to-order environments, • Experience with BI tools (Looker, Tableau, Power BI)Compensation & Benefits, • Salary: $100,000 – $130,000 annually (based on experience), • Discretionary bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • PTO, holidays, parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoe and eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove workshop, • Primarily office-based with frequent time on the shop floor, • Requires seated computer work with occasional light liftingAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$100,000—$130,000 USD

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description The Design Engineer translates creative direction into buildable fixtures. Working on both new collection development and bespoke custom orders, this role produces detailed CAD models, drawings, and documentation that our shop floor, vendors, and installers can all build from. The Design Engineer partners closely with the design studio on aesthetics, with the Manufacturing Engineer on producibility, and with the Assembly and Quality teams on how a fixture actually comes together and gets inspected. Key Responsibilities CAD & Technical Drawings • Create parametric 3D models and manufacturing drawings in Autodesk Fusion (or similar tools) for collection and custom fixtures., • Produce clean, dimensioned drawings with tolerances, finishes, and notes appropriate to the vendor or in-house process., • Develop BOMs and maintain part revisions in NetSuite with support from the Systems Engineer. New Product & Custom Development • Partner with the design studio from concept through production release: sketch review, massing studies, proportion and scale studies, and prototype iteration., • Specify materials and finishes in collaboration with Design, including glass, machined and spun metal, alabaster, and wood., • Lead prototype builds, capture lessons learned, and carry them into a clean production release. Manufacturability & Vendor Handoff • Review designs with the Manufacturing Engineer for manufacturability, tolerance stacks, and cost before release., • Issue drawing packages to vendors and answer technical questions through the Manufacturing Engineer., • Incorporate feedback from QC and Assembly into drawing updates and ECOs. Standards & Compliance • Design fixtures that meet UL 1598 / UL 8750 and relevant electrical and structural standards in collaboration with the Assembly Engineer., • Maintain design documentation and revision history in a disciplined way so that what's in the field matches what's in the system.Required Qualifications, • Bachelor's degree in Mechanical Engineering, Industrial Design Engineering, or a closely related field., • 3–5 years of design engineering experience producing production-ready drawings for manufactured products., • Strong CAD skills in Autodesk Fusion (Fusion 360) or a comparable parametric CAD tool, with GD&T proficiency., • Experience designing for multiple materials and processes: machining, metal spinning, casting, glass, and wood., • Ability to balance aesthetic intent with buildability; comfortable iterating with a design-led team., • Strong communication skills and organized documentation habits.Preferred Qualifications, • Experience designing lighting fixtures and familiarity with UL 1598 / UL 8750., • Experience with NetSuite item and BOM records., • Background in luxury goods, architectural hardware, or high-end furniture., • Exposure to rendering, photometric analysis, or thermal considerations for LEDs.Compensation & Benefits, • Base salary range: $90,000 – $115,000 annually (based on experience), • Discretionary annual performance bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off, holidays, and parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoes and prescription eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop; split between CAD work and time on the shop floor, • Occasional exposure to shop-floor conditions during builds and reviews, • Requires seated work with periodic standing and light lifting (up to 25 lbs)About Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$90,000—$115,000 USD

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Company Outline: Kallidus Technologies, Inc. endeavors to deliver quality construction service. We provide general contracting and design/build services for federal clients. Job Description: Kallidus Technologies, Inc. is looking to fill-in a position for a Project Superintendent in commercial and industrial building. The position will be responsible for performing a variety of duties, including the following: Coordinate Field Activities Schedule tasks, project resources & field coordination including but not limited to Subcontractors Enforce safety Site visits Prepare daily reports Cost control RFIs Change orders Value Engineering Qualifications: Qualified individual will have successfully executed minimum 5 projects in the range of $5 million to $20 million Must have 5+ years experience & OSHA 30 Hr Training Must be able to read Blue Print & Specifications Must have federal or public work experience School construction experience an advange Computer Skills: email, Microsoft word, excel, RFI Excellent verbal and written communication skills All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

Job DescriptionTechnical Sales Representative – Industry Leading Solutions Provider Neff is an industry leading automation solution provider selling best in class technology to manufacturers across a wide range of industries. Neff is growing and thriving and has been for almost a century. Our focus is providing innovative solutions, excellent services and support for our current and future customers. NEFF is a fourth-generation family-owned business dedicated to the success of its customers, partners, and its employees and offers a substantial compensation and benefits package that includes: • Industry leading salary and incentive opportunities with no cap., • Generous Paid Time Off (PTO) increasing within tenure and flexible schedule options., • Mileage and expense reimbursement., • Competitive medical, dental, and vision coverage., • Retirement savings plan including profit sharing., • Wellness and community service program. As a Technical Sales Representative, you will complete the following responsibilities:, • Responsibility to proactively seek, develop, and win new business within assigned territory or accounts., • Actively calling on existing customers to foster growth and new opportunities., • Identify and target potential customers with a focus on engineers and upper management to uncover new opportunities., • Develop a thorough understanding of a customer’s business goals, objectives, and manufacturing processes to match our solutions to the customer’s needs., • Develop and execute strategies to generate a consistent pipeline of new opportunities.SPECIAL SKILLS AND ABILITIES REQUIRED:, • Proven technical sales experience required with a focus on selling to engineers and the upper management., • Ability to prospect new business., • Strong customer focus with the ability to initiate, develop, and maintain relationships., • Ability to work creatively, independently, and collaboratively.EDUCATION AND EXPERIENCE:, • A relevant bachelor’s degree in engineering, industrial technology, with robotics and/or automation technology focus required., • In lieu of a bachelor’s degree, a relevant associate degree in a related technical field with strong, demonstrated mechanical/technical aptitude and 3-5 years of technical sales experience. Salary Range: Base salary of $80,000 - $100,000 based on experience and education plus an uncapped sales compensation plan. Neff does not intend to provide sponsorship for employment visa status (e.g., H-1B, TN, etc.) for this employment position. If this sounds like the right fit for you – APPLY TODAY! Our customers expect the best Technical Sales Representatives, so that’s all we hire!

Job Description The Assembly Engineer is dedicated to the Assembly department. This role designs and optimizes how Allied Maker fixtures are put together, ensures every assembler is trained to the right method, documents every meaningful change, and holds the line on UL compliance in both assembly and QC. The Assembly Engineer is the person who walks the bench every day, improves the work, and makes craft and consistency compatible at scale. Key Responsibilities Assembly Methods & Optimization • Study and optimize assembly methods across the fixture portfolio: sequence of operations, fixturing, tools, takt, and ergonomics., • Design and build bench fixtures, jigs, and tooling that make quality easier and throughput higher., • Drive continuous-improvement initiatives (Lean/Kaizen) to reduce cycle time, rework, and ergonomic risk without losing the hand-crafted feel. Documentation & Change Control • Own the library of assembly work instructions (clear, illustrated, and current) for every fixture., • Drive disciplined change control so that improvements and corrections are documented and rolled out cleanly. Training & Capability • Build and maintain a structured training program for assemblers, including onboarding, cross-training, and certification for critical operations., • Coach assemblers on new methods and verify competency when standards change., • Support new-product introductions with pilot builds and first-article training. UL Compliance in Assembly & QC • Maintain compliance with applicable UL standards (e.g., UL 1598, UL 8750) in assembly operations and in final QC inspection., • Serve as the primary internal point of contact for UL files, construction details, and field evaluations when required., • Partner with the Quality Control Engineer to ensure final inspection reliably catches anything that would compromise UL listing or customer quality.Required Qualifications, • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering, or equivalent hands-on experience., • 3–5 years of manufacturing or assembly engineering experience in a discrete-manufacturing environment., • Proven experience authoring work instructions, building fixtures, and running structured training., • Working knowledge of UL standards for lighting (UL 1598 / UL 8750) or comparable safety-listed products., • Strong Lean/CI toolkit (5S, standard work, value-stream thinking, 5-Why/8D)., • A people-first posture: the ability to teach, coach, and earn trust with experienced assemblers.Preferred Qualifications, • Direct experience with UL lighting compliance, including maintenance of UL files., • CAD skills (Fusion or similar) for fixture design., • Prior work in lighting, luxury goods, or custom furniture manufacturing., • Lean / Six Sigma certification.Compensation & Benefits, • Base salary range: $85,000 – $110,000 annually, commensurate with experience., • Discretionary annual performance bonus., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with company match., • Paid time off, paid holidays, and paid parental leave., • Employer-paid life and disability insurance; employee assistance program., • Safety shoes and prescription safety eyewear allowance for shop-facing roles., • Employee discount on Allied Maker products.Work Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop; significant daily time on the assembly floor with additional time at a desk for documentation and design., • Active shop-floor environment; safety glasses and closed-toe footwear required in designated areas., • Requires standing and walking for extended periods and occasional lifting up to 40 lbs when handling fixtures or tooling.About Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$85,000—$110,000 USD

Job DescriptionDescription: Job Title: Quality Control Engineer / Quality Specialist Location: Spartanburg, SC or Mount Vernon, NY Company: ICE AIR, LLC and Affiliates (“Ice Air”, the “Company”, “We”) About Us: Ice Air is a manufacturer of innovative HVAC solutions serving the North America market. We are dedicated to providing reliable, quality, energy-efficient equipment for all new construction, replacement and retrofit projects. Position Overview: We are seeking a motivated Quality Control Engineer / Specialist to support the reliability, performance, and continuous improvement of our HVAC products and manufacturing processes. This role will focus on identifying quality issues, performing structured root cause analysis, improving internal processes, and strengthening feedback loops between manufacturing, engineering, service, and customers. The ideal candidate will have experience working in a manufacturing or service-oriented environment and will be comfortable analyzing technical problems, communicating with cross-functional teams, and driving corrective actions that prevent recurring issues. This individual will play an important role in helping build more robust systems and improving the overall customer experience. Key Responsibilities: • Lead Root Cause Corrective Action (RCCA) investigations into internal quality issues, field failures, and customer complaints., • Utilize structured problem-solving tools such as 8D, 5-Why analysis, Fishbone diagrams, Pareto analysis, and FMEA to identify root causes and implement corrective actions., • Analyze service trends, warranty data, and field performance information to identify recurring issues and improvement opportunities., • Work closely with engineering, manufacturing, and service teams to strengthen system reliability and help “bullet-proof” HVAC equipment performance in the field., • Develop and maintain quality control processes, inspection standards, and documentation to ensure consistent production quality., • Partner with manufacturing teams to identify process weaknesses and implement improvements that reduce defects and variability., • Monitor quality performance indicators including defect rates, warranty trends, service call data, and customer feedback., • Support containment activities and corrective action implementation when quality issues arise., • Communicate clearly with both technical teams and leadership, ensuring issues and solutions are understood across the organization., • Assist with customer communication when necessary to explain findings, corrective actions, and improvement plans., • Support new product introductions by validating quality processes and production readiness., • Help drive a culture focused on continuous improvement, accountability, and proactive quality management. What We Offer: • Competitive salary, bonus, and benefits package., • Significant long-term growth opportunity., • Collaborative and supportive work environment.Requirements: Required Qualifications • Bachelor’s degree in engineering, Industrial Engineering, Mechanical Engineering, Quality Engineering, or related technical field preferred., • 2–4 years of experience in quality engineering, manufacturing, service engineering, or related technical roles., • Hands-on experience performing root cause analysis and implementing corrective actions., • Strong analytical and data interpretation skills with the ability to identify trends and improvement opportunities., • Ability to work effectively across multiple departments including operations, engineering, service, and leadership teams., • Strong written and verbal communication skills., • Proficiency with standard business tools including Excel, Word, and PowerPoint. Preferred Qualifications • Experience with HVAC systems, refrigeration systems, or electro-mechanical assemblies strongly preferred., • Experience working with service teams or customer feedback loops is a plus., • Experience with HVAC equipment such as PTAC units, packaged systems, or commercial HVAC products., • Familiarity with manufacturing quality systems, continuous improvement methodologies, or Lean/Six Sigma environments., • Experience performing failure analysis or reliability investigations., • Ability to help build structured processes that prevent issues rather than simply reacting to them. Personal Attributes • Strong problem-solver with a curiosity for understanding technical failures., • Comfortable working in a fast-paced manufacturing environment., • Ability to communicate effectively across all levels of the organization., • Collaborative mindset with the ability to influence teams and drive improvements., • Focused on building durable systems, strong processes, and long-term quality improvements.

Job DescriptionMulti-discipline engineering firm in business for decades is looking for a Senior Project Mechanical Engineer for their White Plains office! Responsibilities: • Design of HVAC systems for small and large projects for a variety of building types (industrial buildings, schools, firehouses, commercial buildings), • Supervise/coordinate projects with other engineering and architecture departments, • Prepare construction drawings/specifications, • Build/maintain client relationships, • Project leadership including providing technical direction, production and scheduling, quality control and cost proposal preparation, • Assist with business development, • Mentor/train junior staff Requirements: • Bachelor’s degree in mechanical engineering, • 6+ years of HVAC design experience, • 5+ years of project management experience, • Experience working with municipalities and government agencies preferred Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job Description The Manufacturing Engineer sits between Allied Maker's Design team and the outside world of partner vendors. When a tolerance doesn't behave, a finish won't hold, a material fights the process, or a vendor asks a question that could change the part, this is the person who answers, and then loops back to Design with the improvement. The Manufacturing Engineer is a hands-on problem solver whose work keeps fixtures buildable, beautiful, and on schedule. Key Responsibilities Vendor Technical Liaison • Serve as the primary technical contact between Design Engineering and partner vendors (machining, spinning, casting, glass, alabaster, wood), • Resolve vendor questions about tolerances, materials, finishes, and process capability while preserving design intent, • Support QC on supplier quality issues: investigate root cause, implement corrective actions, and verify effectiveness Design for Manufacturability (DFM) • Review designs with Design Engineering for manufacturability, tolerance realism, assembly fit, and cost before release, • Propose actionable design improvements to improve yield, cost, and schedule while maintaining design intent, • Maintain a library of DFM lessons learned Process & Tolerance Ownership • Own tolerance stack-up analysis on critical features, • Resolve conflicts between design intent and vendor capability, • Define inspection and acceptance criteria with QC, • Lead first-article reviews and process qualification for new vendors and parts Continuous Improvement • Partner with Assembly, Pre-Production, and Quality to resolve recurring issues from vendor parts or upstream design, • Track the cost of poor quality and lead-time impact from vendor issues and report trendsRequired Qualifications, • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering, • 3–5 years of manufacturing engineering experience with vendor interaction, • Strong knowledge of machining, spinning, casting, and finishing processes, • Fluent in GD&T (ASME Y14.5), tolerance stack-ups, and process capability, • Strong communication skills across technical and non-technical stakeholders, • Organized, decisive, and able to own issues through resolutionPreferred Qualifications, • Experience in lighting, luxury goods, architectural hardware, or custom manufacturing, • CAD experience (Fusion or similar), • Familiarity with UL 1598 / UL 8750, • Lean / Six Sigma experience, • Experience working with Northeast US vendorsCompensation & Benefits, • Salary: $95,000 – $120,000 annually (based on experience), • Discretionary bonus, • Medical, dental, vision insurance, • 401(k) with company match, • PTO, holidays, parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoe and eyewear allowance, • Employee product discountWork Environment & Physical Requirements, • On-site at the Glen Cove workshop, • Mix of desk work, shop floor time, and vendor interaction, • Active shop environment; PPE required where applicable, • Occasional travel to vendor facilitiesAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$95,000—$120,000 USD

Job Description The Quality Control Engineer owns incoming inspection and supplier quality for all parts, components, and sub-assemblies entering Allied Maker's production process. Working across materials including hand-blown glass, machined and spun metals, alabaster, and wood, this role defines quality standards, builds inspection systems, and partners with vendors to resolve issues at the root cause. This role is critical to maintaining the craft, consistency, and reliability expected from Allied Maker products. Key Responsibilities Incoming Inspection Across Materials • Develop inspection plans, sampling strategies, and acceptance standards for each material type, • Inspect glass for dimensional accuracy, clarity, inclusions, and color consistency, • Inspect machined/spun metals for dimensional conformance, wall thickness, and surface finish, • Evaluate alabaster for veining, translucency, and structural integrity, • Verify wood components for species, moisture content, joinery, and finish quality Supplier Quality & Vendor Development • Act as primary quality contact for vendors, • Lead root-cause analysis (8D, 5-Why, Fishbone) and corrective actions, • Qualify new suppliers and parts via First Article Inspection (FAI), • Track supplier performance (defects, responsiveness, quality consistency), • Conduct supplier audits and site visits Nonconformance & Continuous Improvement • Disposition nonconforming material (rework, RTV, scrap, use-as-is), • Lead cross-functional MRB decisions, • Analyze defect trends and cost of poor quality, • Drive improvements to reduce scrap, rework, and disruptions, • Partner with Assembly & Manufacturing Engineering on upstream improvements Standards & Documentation • Build and maintain inspection standards and boundary samples, • Create clear, repeatable inspection work instructions, • Maintain calibration of measurement tools and traceable records, • Ensure documentation is properly recorded in NetSuite and internal systems, • Support UL compliance by validating incoming componentsRequired Qualifications, • Bachelor's degree in Mechanical, Industrial, Materials, or Manufacturing Engineering (or equivalent experience), • 3–5 years of quality engineering experience in manufacturing or custom/luxury goods, • Strong ability to read engineering drawings and GD&T (ASME Y14.5), • Proficiency with precision measurement tools (calipers, micrometers, gauges, etc.), • Experience leading root-cause investigations and supplier corrective actions, • Ability to define and standardize subjective quality (visual / craftsmanship), • Strong communication skills with internal teams and external vendorsPreferred Qualifications, • Experience in lighting, luxury goods, architectural hardware, or custom furniture, • Familiarity with UL 1598 / UL 8750 standards, • ASQ certification (CQE, CQA) or Lean / Six Sigma, • Experience with natural materials (stone, glass, wood, alabaster), • Experience with NetSuite or similar systemsCompensation & Benefits, • Salary: $75,000 – $95,000 (based on experience), • Discretionary performance bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • PTO, paid holidays, parental leave, • Employer-paid life and disability insurance, • Safety shoe & eyewear allowance, • Employee product discountWork Environment & Physical Requirements, • On-site in Glen Cove workshop, • Split between the inspection area, production floor, and desk work, • Exposure to shop environment (dust, finishes, moving equipment), • PPE required in designated areas, • Must be able to stand/walk for extended periods, • Lift up to 35 lbs and handle fragile materials, • Occasional travel to vendorsAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$75,000—$95,000 USD

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The position will serve a core role in the oversight and management of Veolia Water New York’s (VWNY) environmental compliance operations related to water quality, water/wastewater treatment, and distribution monitoring in Veolia’s North American operations. As a member of the Water Quality Department, the team member will be continuously working to ensure that the water quality of the VWNY operations consistently meets and surpasses water quality standards as required by the county, state and federal regulatory agencies. This member will also be dedicated to advancing the operational best practices of Veolia. A strong understanding of compliance rules and regulations in the water sector is essential. Primary Duties/Responsibilities: • Support the development, operation, and maintenance of a compliance data management system (e.g. SAMS)., • Responsible for the development and maintenance of various compliance tracking mechanisms (spreadsheets, dashboards, key performance indicators, etc.) to monitor operations and compliance., • Stay up to date with water and wastewater regulations within the regions where VWNY operates., • Supervise the sample collection process to ensure required samples are collected within all State and Federal schedules., • Maintain good relationships with contract laboratories and review data generated for accuracy., • Ensure the State and Federal sampling plans are up to date, and sampling schedules are configured and uploaded into the data management system for various facilities., • Timely preparation and dissemination of required reports, both internally and externally., • Assist with identifying root causes of water quality/treatment issues; recommend and assist production with implementing and monitoring optimized treatment solutions to maintain water quality., • Assist with addressing customer water quality issues through sampling and qualitative and quantitative laboratory testing., • Assist with the development of training documents, SOPs, and related materials. Train employees on regulatory requirements, sample collection, and field analysis procedures., • Participate in or support special projects/initiatives related to WQ (e.g. Lead & Copper Rule, PFAS treatment) to enhance compliance and optimize treatment methods and/or quality of product, including unregulated contaminants., • Operate within a team-oriented atmosphere, motivate and support peers in achievement of shared objectives, and maintain professional relationships with all internal and external staff., • Perform other duties, as assigned. Work Environment: • While this role is primarily office-based, special assignments may require working in various field environments., • These environments can include outdoor locations during inclement weather, as well as indoor areas such as water/wastewater treatment plants, customer properties, pumping stations, and roadways, as needed to complete the required work. Qualifications Education/Experience/Background: • Bachelor’s Degree in Chemistry, Environmental Science, Engineering and/or Biology, preferred., • Master’s degree in related fields is a plus., • 2+ years of overall experience in data management/analytics, Water/Wastewater Quality/Environmental compliance reporting preferably working with drinking water or wastewater treatment plants, or other processes/facilities (e.g. industrial waste treatment) that are governed by Federal or State environmental regulatory agencies. Knowledge/Skills/Abilities: • Working knowledge of water quality regulations and water treatment plant processes., • Basic knowledge of chemistry, biology and mathematics., • Strong data management skills. Ability to manage and interpret WQ date (data management / database management)., • Demonstrated ability to problem-solve or trouble-shoot laboratory or treatment issues to ensure organizational goal of zero violations is met., • Ability to communicate effectively both orally and in writing., • Ability to shift priorities frequently and effectively depending on project requirements and deadlines., • Strong interpersonal skills to effectively interact with teams at all levels, both internally and externally., • Basic understanding of environmental compliance regulations, • Ability to use Google Workspace and Excel. Required Certification/Licenses/Training: • Possesses and maintains a valid driver's license and safe driving record if required to use company vehicles. Additional Information Pay Range: $75000 to $83000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Identify and implement strategies to reduce costs and improve supply chain performance. Bachelor's degree or higher in Supply Chain Management, Industrial Engineering, Management Information Systems (MIS), or Information Technology (IT) or a related field. Proficiency in data analysis tools and supp

Adjunct Faculty - Engineering Management/Industrial Engineering. Engineering Management, Industrial Engieneering or a related area. The BS Engineering Management program at New York Institute of Technology is looking for adjunct faculty to teach courses for this program, such as Operation Research,

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Advanced degree (Master’s or PhD) in Mechanical Engineering, Chemistry, Physics, or Biology. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Generate, review, and refine questions and solutions based on real-w

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

The Senior Project Manager will lead the end-to-end delivery of system modernization through both discovery and implementation phases.This role is responsible for managing a complex, multi-agency IT project aimed at transforming legacy processes into a modern, efficient digital platform.The Project

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Role Summary The Cybersecurity Project Manager is a role within the Technology Program Management Office reporting directly to the Senior Director, Information Security Portfolio Manager, with dotted line matrixed reporting to the Business Engagement & Technology Senior Director - Information Securi

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

LE04 Public Consulting Group LLC in the United States seeks an experienced professional to lead project teams in delivering public sector solutions.The ideal candidate will have at least 10 years of technology experience and strong project management skills, particularly in cloud-based ERP systems l

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

A global leader in service management is seeking a Technical Project Manager to lead complex projects from start to finish.The ideal candidate should have over 5 years of IT experience and a strong command of Agile, Hybrid, and Waterfall methodologies.Responsibilities include managing project budget

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

A leading web services provider is seeking an experienced Software Project Manager to lead high-impact projects remotely.The ideal candidate will have a strong background in technical project management, especially in web and digital environments.Responsibilities include managing timelines, coordina

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Expert knowledge of recent technological advances in computer science and engineering.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Divelement is now Winmill! JOB SUMMARY We are looking for a marketing Software Project Manager with hands‑on experience in software development , web technologies , and website migration projects.You’ll be leading the planning, coordination, and execution of a high‑impact projects, working al

About the Position Dimagi is looking for a Project Manager to support our Data & Analytics work within the US Solutions Division.This position will be affiliated with our Cambridge, MA office but is open to remote employment within the United States.This is a 12-month fixed-term position with the po