Inspector jobs in Houston, Texas - Page 3Create job alerts

Facility Location The United States Attorney's Office Southern District of Texas 1000 Louisiana Street Houston, TX 77002 Position Information NON-SCHEDULED DAYS: Saturday/Sunday HOURS: 09:00 A.M. to 05:00 P.M. BENEFIT INFORMATION: The salary will be based on previous experience and current postal pay policies. We offer excellent benefits including health and life insurance, retirement plan, savings/investment plan with employer contribution, flexible spending, flextime scheduling of core work hours, annual and sick leave. Functional Purpose Serves as Special Assistant U.S. Attorney while litigating mail theft and other complex cases as designated by the Chief Inspector or designee for an assigned division/ geographic region of the U.S. Postal Inspection Service. Telework is available one day per week. DUTIES AND RESPONSIBILITIES 1. Represents the United States Postal Service in the prosecution of federal crimes., 2. Develops and recommends strategies and coordinates the preparation of litigation for mail theft, mail fraud and other complex cases., 3. Performs all aspects of criminal discovery, motions practice, trials and appeals., 4. Meets with defense attorneys in advance of trial to conduct pre-trial conferences and negotiations., 5. Works closely with postal inspectors and other law enforcement agents, witnesses and victims during criminal investigations, trial preparation and all phases of litigation., 6. Conducts legal research. Prepares memoranda and briefs on questions of law. Prepares pleadings. The United States Postal Service has the following excellent and challenging employment opportunity for highly motivated and innovative individuals. Successful candidates must demonstrate through a combination of education, training, and experience the following requirements: Requirements 1. Ability to conduct legal research to gather and interpret information and ensure accuracy of details, using resources such as internal and external documents, archives, electronic databases, and interviews. 2. Ability to provide legal advice and services and to formulate opinions involving the analysis and interpretation of federal, state, and local laws., 3. Ability to litigate cases before federal courts., 4. Ability to communicate orally and in writing, including the ability to negotiate with third parties on behalf of clients and to prepare legal documents and presentations., 5. Ability to obtain and maintain status as Special Assistant U.S. Attorney., 6. SPECIAL CONDITION: Qualified applicants must be licensed and in good standing in a state bar., 7. EXPERIENCE REQUIREMENT: At least three years of experience in legal practice, of which one year may be met through the completion of a judicial clerkship. The clerkship must be documented in the applicant's resume., 8. SPECIAL CONDITIONS: Applicant must submit to a Tier 5 Single-Scope Background Investigation (SSBI) and a Sensitive Compartmented Information (SCI) if required. This investigation requires, among other things, completion of a questionnaire and fingerprinting for a criminal records check. The investigation may require a drug test. The successful applicant will be required to obtain and maintain a Top Secret or Top Secret/SCI clearance while holding this position., 9. EDUCATION REQUIREMENT: Applicants must have a Juris Doctor degree from an American Bar Association accredited law school. Relocation benefits will not be offered to the successful candidate. Qualified applicants must successfully pass a pre-employment drug screening to meet the U.S. Postal Service's requirement to be drug free. Applicants must also be a U.S. citizen or have permanent resident alien status.

Job Description JOB TITLE: CUSTOMER SERVICE ADVISOR (CSA) Island Breeze Car Wash is a premier car wash and detailing service provider dedicated to delivering top-notch services and exceptional customer experiences. Our Lube services offer comprehensive car maintenance solutions, and we are looking for a dedicated and customer focused individual to join our team as a Customer Service Advisor. JOB PURPOSE: The Lube Customer Service Advisor is a critical role at the forefront of our services division, serving as the liaison between our customers and our service technicians. The CSA is the first point of contact for our customers, providing them with friendly and knowledgeable assistance throughout their service experience. This position requires an individual with a strong understanding of automotive maintenance services, excellent communication skills, and a commitment to customer satisfaction. DUTIES & RESPONSIBILITIES: • Customer Service: Greeting customers with a warm and welcoming attitude, addressing inquires, and providing accurate information about our services, promotions, and products. Build trusting relationships with customers by providing honest service recommendations and clear explanations of service work., • Service Coordination: Schedule and coordinate lube service appointments. Communicate with the service team to ensure timely and efficient service delivery. Monitor service progress and keep customers informed of any updates or delays., • Vehicle Inspection: Conducting basic vehicle inspections to identify potential maintenance needs and communicating findings to customers in a clear and understandable manner., • Sales Support: Assisting customers in selecting appropriate services and products based on their vehicles needs and manufacturer recommendations. Educate customers on the importance of regular vehicle maintenance and how our services can benefit their vehicles performance and longevity., • Cash Handling: Processing customer payments accurately and efficiently, handling cash, credit, and debit transactions, and maintaining proper cash handling procedures., • Administrative Duties: Maintain accurate records of customer interactions and transactions. Process payments and manage cash handling with accuracy. Ensure all customer information is entered correctly into the system., • Team Collaboration: Collaborating with technicians and other team members to ensure smooth workflow and exceptional customer service delivery., • Customer Satisfaction: Resolve customer complaints and concerns promptly and professionally. Ensure a high level of customer satisfaction by providing excellent service. Collect and analyze customer feedback to improve service quality., • Cleanliness and Organization: Maintaining cleanliness and organization of the shop and customer waiting areas, including restocking supplies and keeping workstations tidy., • High school diploma or equivalent; additional qualifications in customer service or automotive services preferred., • Proven experience in customer service, ideally in the automotive service industry., • Knowledgeable about vehicle lubrication systems and general maintenance services., • Strong interpersonal and communication skills, with the ability to convey technical information in an understandable manner., • Organized, with the ability to manage multiple tasks and prioritize in a fast-paced environment., • Enthusiasm for delivering exceptional customer experiences., • Flexibility to work weekends and holidays as needed., • Competitive salary based on experience and performance-based incentives., • Opportunities for professional growth and development., • Employee discounts on services and products, • Paid time off

Position: Bridge Inspector Lead - Texas Location: Houston, TX Job Id: 2559 of Openings: 1 Bridge Inspection Lead Locations: Indiana, Michigan, Ohio, or Texas Employment Type: Full-Time Lead & Grow Fishbeck's National Bridge Inspection Practice Fishbeck is actively seeking an experienced Bridge Inspection Lead to support and grow our bridge inspection practice across multiple states, including Indiana, Michigan, Ohio, and Texas. This senior-level role is ideal for a seasoned professional with strong technical expertise, proven client engagement skills, and experience managing inspection and scoping contracts for agencies of varying size and complexity at both the state and local levels. In this role, you will collaborate closely with Fishbeck's Transportation teams to identify business opportunities, lead project execution, and cultivate strong relationships with key clients and industry partners, playing a vital role in the continued expansion of our nationwide inspection practice. What You'll Work On • Lead and grow bridge inspection practice, including recruiting with assistance from bridge team leaders., • Provide mentorship and guidance to technical staff., • Manage contracts with various clients such as DOT's, counties, locals, private, etc., • Assist departments with identifying and pursuing bridge inspection contracts in current and future office locations., • Lead pursuits, prepare proposals, and develop fees for potential projects., • Develop strategic alliances with peers in the industry to provide bridge inspection services., • Work with other departments to provide client development and cross-marketing opportunities., • Contribute to the development of the firm's long-term business goals, and objectives. What We're Looking For, • Bachelor's or Master's degree in Civil Engineering or related discipline., • Professional Engineer (PE) license required., • 15+ years of experience in bridge inspection or related roles supporting DOT or local agency projects., • Qualified bridge inspection program manager and team leader experience., • Experience with DOT bridge management software., • Experience performing load ratings in AASHTOWare BrR., • SPRAT certification preferred., • Knowledge of design modeling or plan production software is a plus., • Strong computer, written, and verbal communication skills. Minimum Physical Requirements, • Ability to perform field work, access and maneuver around project sites, and use a computer., • Ability to travel to project and client sites as required., • Ability to use communication and documentation equipment., • Visual acuity necessary to perform inspection and documentation responsibilities. Why Fishbeck?, • Work on meaningful projects that promote environmental stewardship., • Collaborate within a supportive, people-first culture., • Enjoy flexibility with hybrid and field-based work options., • Be part of a 100% employee-owned company that invests in your future. Benefits, • Medical, dental, and vision insurance, • Wellness reimbursement and activities, • Tuition assistance, continuing education, and professional development support, • Vacation and sick time, volunteer PTO, parental leave, and paid holidays, • 401(k), profit sharing, and stock options (100% employee-owned), • And more! Ready to Apply? Submit your application and a member of our Talent Acquisition team-not a bot-will personally follow up with you. About Fishbeck Fishbeck is one of the nation's premier professional consulting firms, with more than 750 employees across 22 regional offices. Our integrated services include engineering, environmental sciences, architecture, and construction management. We pride ourselves on being a hands-on, design-oriented firm with the expertise to carry projects from concept through completion-delivering reliability, creativity, and strong client connections every step of the way. Fishbeck is an equal-opportunity employer committed to diversity. All qualified applicants will receive consideration without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, or veteran status. Apply for this Position

Responsibilities ECS is seeking a Building Enclosure Project Professional to join our SouthwestBuilding Science + Infrastructure team in Houston, TX. In this role, you will support building enclosure consulting projects through a combination of field investigations, testing, technical analysis, and report preparation. You will collaborate with experienced consultants and multidisciplinary project teams to evaluate building envelope performance, support construction quality, and deliver practical solutions for clients across a variety of facility types. This position offers strong opportunities for hands-on field experience, technical growth, and mentorship within a collaborative consulting environment. Responsibilities Technical & Field Work • Perform building science & infrastructure related testing, inspections, and consulting services., • Conduct site observations and inspections of roofing and building enclosure systems., • Interpret drawings, figures, and site plans; assist with drafting or CAD work when needed., • Perform building enclosure testing and assist with development of testing protocols and test plans., • Interpret test results, identify deficiencies, and recommend corrective actions., • Assist with forensic assessments, commissioning activities, and building enclosure investigations., • Assist with design reviews, repair design for existing building envelope components, and peer review of specifications and submittals., • Support management of multiple building science & infrastructure projects simultaneously., • Coordinate site activities and communicate with field staff, subcontractors, and senior managers., • Assist with proposals, change orders, project budgets, and invoices., • Interface with clients regularly and participate in project meetings and discussions., • Communicate project milestones and follow up on reports or project findings., • Prepare clear technical reports summarizing observations, testing results, and recommendations. Education & Experience • High school diploma or GED required. Associate or bachelor's degree preferred, • 6+ years of experience with building enclosure consulting, including field investigations, testing, commissioning (BECx), design review, or forensic assessments, or an equivalent combination of advanced education and experience, • Experience with non-destructive testing preferred, • Professional certifications (such as NRCA/RCI, AWCI, Certified EIFS Inspector, ICC, IIBEC, Certified Installer/Applicator, etc.) preferred, • Knowledge of building science, building enclosure systems, and construction practices., • Familiarity with building codes, materials, and structural or architectural systems., • Strong written and verbal communication skills., • Ability to manage multiple projects and work effectively with clients and team members., • Nationwide Building Science + Infrastructure Consulting practice made up of more than 180 employees with deep technical expertise and opportunities for collaboration across the country, • Opportunity to lead high-profile projects with technical complexity and visibility, • Be part of a growing and innovative team focused on technical excellence and client service, • Supportive work environment that values expertise, collaboration, and continuous learning, • Competitive salary, performance bonuses, and comprehensive benefits, • ECS is an employee-owned company with an Employee Stock Ownership program (ESOP)!, • 401(k) with up to 4% match, • Tuition Assistance Program, • And more! ECS Core Values:Collaborate, Focus & Lead About Us ECS Group of Companies (ECS) was founded in 1988 with the goal to raise the standards of professional engineering consulting. Today, we are a leader in geotechnical, construction materials, environmental and facilities consulting services. We are employee-owned with more than 3,000 employees in 100+ offices and testing facilities coast to coast. ECS is currently ranked #60 in Engineering News-Record's Top 500 Design Firms (April 2026), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). For additional information about ECS, visit: ___ ECS is an Equal Opportunity Employer. To learn more, click___.

Oceaneering Integrity Management and Digital Solutions (IMDS) delivers capability, safety, and reliability. We help our customers make informed decisions and manage risk associated with their oil and gas, renewables, and maritime assets-any time, any place. Customers are confident that when they choose us, we will respond with the safe, green, efficient, and cost-effective solutions and services they require. We are seeking an experienced Asset Integrity Engineer to support implementation of the Integrity Management Pressure Systems service to the allocated Assets/sites. The ideal candidate will have a strong background in asset integrity management, inspection technologies, and technical leadership, with specific familiarity with Gulf of America operated assets. The candidate would be able to draft, check, implement and maintain the Oceaneering asset integrity management service to ensure the continued integrity of our client's onshore and offshore production facilities. This service is to be in line with all Oceaneering and our client's documentary requirements and onshore / offshore legislation where applicable. ESSENTIAL : • Provide support to Integrity Management / Inspection Management / Risk Assessment activities for Pressure Systems in accordance with client contractual requirements., • Ensure projects are performed in accordance with industry codes/standards, legislation, accreditation, and Oceaneering or Client policies/procedures., • Prepare or implement Pressure Systems Integrity and Inspection Management strategies and risk-based assessments., • Experience with asset integrity management/RBI software., • Input to the review and analysis of Pressure Systems equipment data (history, inspections, design documents, process, IOW) for input into assessments and studies., • Support risk assessments, life assessments, authoritative reviews and associated engineering calculations or studies for static mechanical Pressure Systems as required., • Participate in development of comprehensive examination schemes (and where required work packs) for inspections and activities based on RBI outcomes, ensuring all parties are fully conversant with all aspects of the work scopes., • Write accurate and concise reports or documents which review, analyze, and trend integrity management or risk assessment data and outputs., • Interface and support input to the Client short- and long-term plans in accordance with Client planning process., • Develop strong relationships internally with the integrity management team and externally with Clients, Contractors and site personnel to ensure excellence in delivery and an effective integrity service., • Undertake offshore or site visits as required., • The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post., • Assist with any other duties as and when required., • Undertake specific projects as instructed by management. REQUIRED: • Master's Degree in an Engineering or Science discipline in a relevant subject (e.g. Mechanical, Materials, Chemical Engineering), • API 510 Pressure Vessel Inspector, API 570 Piping Inspection, API 580 Risk Based Inspection or equivalent, • Working towards award of professional engineer status within local region, • Minimum 6 years of specific experience related to asset integrity role in oil & gas, petrochemicals or energy sectors. Experience managing integrity programs for multiple facilities., • Strong understanding of pressure vessel design, inspection, and maintenance as per ASME/API standards., • Knowledge of process piping and pipeline systems and standards (ASME/API standards)., • Knowledge of standards, risk assessments and legislation associated with the in-service inspection of plant and equipment, • Proficiency in using any integrity data management systems (IDMS)., • Proven experience with risk-based inspection (RBI) methodologies and engineering assessments, knowledge of corrosion mechanisms and mitigation strategies., • Must be familiar with QA/QC systems/procedures and NDT techniques., • Knowledge of design, manufacture, metallurgy, welding and codes associated with fabrication and construction of plant and equipment., • Good communicator, both written, verbal and technical to make complex terminology simple for the benefit of others., • Good client or support contractor relationship skills at various levels of seniority or diverse cultures. This position is Hybrid - Remote and will require commuting to a designated office. Hybrid work schedules are determined by the hiring manager based on business need. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

ESSENTIAL JOB FUNCTIONS • Perform inspections on components, purchased parts, and/or finished products as required, • Prepare inspection reports and maintain files of inspection documents, • Review inspection records received for compliance, • Maintain inspection and measuring equipment, • Prepare and coordinate Non-Conformance Reports (NCR's) for non-conforming parts, • Maintain NOV guidelines on safety, quality, and delivery, • Clean work areas as necessary to maintain cleanliness, health, and safety standards\n FACILITY/GROUP -SPECIFIC RESPONSIBILITIES/EXPECTATIONS • Supports and contributes to facility goals, • Provide feedback on process improvements, cost savings, and opportunities for efficiency and safety, • Remain open to feedback and collaboration with other departments, • Ontime attendance and timeliness, • Must be able to pass a background check and drug/physical test\n EDUCATIONAL & EXPERIENCE QUALIFICATIONS • High School Diploma or equivalent, • 1+ yrs. Knowledge of standard measurement equipment and inspection processes such as Micrometers and Calipers.\n, • Three or more years of related experience and/or training preferred, • Demonstrable experience reading and understanding engineering prints, • Demonstrable experience of computer literacy and use of Microsoft Office programs, • Non-destructive inspection experience a plus\n COMPETITIVE BENEFITS: (visit usbenefits.nov.com for more information about our benefits offerings) • 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest., • Competitive medical plans that are effective your date of hire. Visit usbenefits.nov.com/cost-for-coverage for more information., • FREE MDLIVE virtual visits (when enrolled in an NOV medical plan)., • FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician)., • FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees)., • All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals., • All regular full-time employees receive up to 11 paid holidays per year.

About ITT: ITT is a leading manufacturer of critical components for harsh environments that serves fast-growing end markets in flow, aerospace and defense, energy and transportation. Building on our heritage of innovation, we partner with our customers to deliver solutions to the key industries that underpin our modern way of life.Headquartered in Stamford, CT, we have more than 11,700 employees globally with operations in ~40 countries and sales in more than 125. At our core is our engineering DNA, with 1,280+ engineers, 1,700+ active global patents and ~51 manufacturing locations. Our businesses are organized in three distinct segments, each based around our core engineering DNA: Industrial Process: A global leader in centrifugal and twin-screw pumps and engineered valves for chemical, energy, mining, and industrial applications. Our leading brands include the iconic Goulds Pumps (with more than 175 years of history), Bornemann, Habonim, Engineered Valves, Rheinhütte Pumpen and Svanehøj. Motion Technologies: A global leader in brake pads (ICE and electrified brake pads) and shock absorbers (energy absorption solutions) for transportation applications. Our leading brands include Friction Technologies, KONI and Axtone. Connect and Control Technologies: A leader in critical applications for the aerospace, defense and industrial markets, including harsh environment connectors and control components. Our leading brands include ITT Cannon, Enidine, Aerospace Controls and kSARIA. Position Summary We are seeking a Pump Quality Inspector to support our aftermarket repair and upgrade business in our Houston PRO Services shop located in Stafford, TX. Building on centuries of pump design experience, PRO Services provides an array of services focuses on reducing equipment total cost of ownership and increasing plant output, including condition monitoring, predictive maintenance contracts, field service, engineered upgrades, inventory management, and overhauls for pumps and other rotating equipment. The Quality Inspector assists shop with production and technical support. The Quality Inspector will support the shop by producing quotes, procuring drawings from manufacturing divisions, and providing inside sales and manufacturing support for all repair and upgrade work. Essential Responsibilities May include: • Conduct equipment inspections and document findings in detailed inspection reports in accordance with company and customer requirements., • Ensure all assigned jobs have the repair scope created within the timeframe defined by both PRO Service and customer expectations., • Produce drawings for parts manufacturing or repair., • Ensure all milestones are met., • Provide customer support and follow-ups in conjunction with Repair Coordinators and the Sales team., • Recommend upgrades and support the Sales team with problem-solving and solutions for customers., • Responsible for receiving jobs, entering, and completing all required data for entry., • Provide production and engineering support to the Shop., • Communicate daily with the Facility General Manager and Repair Coordinators on ongoing jobs and DCI scopes., • Follow established ISO 9001, ITT EHS, and other guidelines as required., • Contribute to facility goals for safety, cost savings, and quality/cost of poor quality (rework). Knowledge & Skills: • Excellent communication and interpersonal skills to interact effectively with diverse client group., • Ability to troubleshoot in-depth issues with rotating equipment., • Ability to read, analyze, and interpret pump drawings., • Ability to anticipate and solve practical problems and resolve issues., • Self-starter with the ability to work both independently and within a team., • Ability to effectively communicate ideas and properly describe problems and solutions., • Ability to effectively handle multiple tasks, time management, and prioritization skills., • Well-developed planning, organization, analytical, and decision-making skills, • Ability to produce clear, timely, and concise documentation and have well-developed problem-solving skills., • Ability to apply good judgment, strong work ethic, and integrity on the job., • Proficient in relevant PC skills.\nExperience:, • Minimum 10 years of related experience is required., • Practical, working experience with repair or service of pumps or other rotating equipment., • Proficient in MS Office\nEducation: ASQ Certified Quality INspector (CQI) or equivalent quiality inspection certification/experience. Equal Pay Act Statement We aim to pay our 'ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based not only on 'what' they accomplish, but also on 'how' they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. Specific benefits are dependent upon whether or not the position is part of a collective-bargaining agreement. The salary offered to a candidate is based several factors such as candidate experience and qualifications, location, as well as market and business considerations. Equal Pay Act Range Between $30.92 and $46.20, depending on experience

About ITT: ITT is a leading manufacturer of critical components for harsh environments that serves fast-growing end markets in flow, aerospace and defense, energy and transportation. Building on our heritage of innovation, we partner with our customers to deliver solutions to the key industries that underpin our modern way of life.Headquartered in Stamford, CT, we have more than 11,700 employees globally with operations in ~40 countries and sales in more than 125. At our core is our engineering DNA, with 1,280+ engineers, 1,700+ active global patents and ~51 manufacturing locations. Our businesses are organized in three distinct segments, each based around our core engineering DNA: Industrial Process: A global leader in centrifugal and twin-screw pumps and engineered valves for chemical, energy, mining, and industrial applications. Our leading brands include the iconic Goulds Pumps (with more than 175 years of history), Bornemann, Habonim, Engineered Valves, Rheinhütte Pumpen and Svanehøj. Motion Technologies: A global leader in brake pads (ICE and electrified brake pads) and shock absorbers (energy absorption solutions) for transportation applications. Our leading brands include Friction Technologies, KONI and Axtone. Connect and Control Technologies: A leader in critical applications for the aerospace, defense and industrial markets, including harsh environment connectors and control components. Our leading brands include ITT Cannon, Enidine, Aerospace Controls and kSARIA. Position Summary We are seeking a Pump Mechanic/Inspector to support our aftermarket repair and upgrade business in our Houston PRO Services shop located in Stafford, TX. Building on centuries of pump design experience, PRO Services provides an array of services focuses on reducing equipment total cost of ownership and increasing plant output, including condition monitoring, predictive maintenance contracts, field service, engineered upgrades, inventory management, and overhauls for pumps and other rotating equipment. Essential Responsibilities May include: • Perform complete disassembly and reassembly of centrifugal pumps, including multistage and high-energy units., • Conduct detailed dimensional inspections of critical components (shafts, impellers, sleeves, bearings, wear rings, casings) using precision measuring instruments., • Evaluate component condition and determine repair vs. replace decisions based on OEM specifications, tolerances, and operational requirements., • Troubleshoot mechanical issues independently and recommend effective repair solutions., • Develop detailed work scopes based on inspection findings, OEM specifications, and failure analysis, including material and repair recommendations., • Provide work scope and material requirements aligned with customer specifications and internal quality standards., • Measure, calculate, and set critical running clearances and tolerances (axial and radial) in accordance with OEM standards., • Perform precision assembly techniques, including proper torquing, interference fits, and use of heating/cooling methods where required., • Review and verify all running clearances prior to final assembly to ensure proper equipment performance., • Conduct final inspection of all machined parts (repaired or newly manufactured) to ensure accuracy, completeness, and compliance with specifications., • Perform final inspection of assembled equipment, record inspection data, and coordinate completion of documentation prior to shipment., • Safely perform and lead air and hydrostatic testing of equipment; interpret results and troubleshoot any issues identified during testing., • Ensure accuracy and completeness of all inspection sheets, drawings, and related documentation., • Report defects in materials, rework, missed inspections, job delays, and problem areas to applicable internal and external customers., • Mentor and provide technical guidance to lower-level mechanics in disassembly, inspection, troubleshooting, and assembly practices. Knowledge & Skills: • Excellent communication and interpersonal skills to interact effectively with diverse client group., • Ability to troubleshoot in-depth issues with rotating equipment., • Ability to read, analyze, and interpret pump drawings., • Ability to anticipate and solve practical problems and resolve issues., • Self-starter with the ability to work both independently and within a team., • Ability to effectively communicate ideas and properly describe problems and solutions., • Ability to work overtime hours, including weekends and holidays, as needed by customer demands and/or business needs., • Customer service mindset to ensure on-time delivery and quality workmanship., • Ability to effectively handle multiple tasks, time management, and prioritization skills., • Well-developed planning, organization, analytical, and decision-making skills, • Ability to produce clear, timely, and concise documentation and have well-developed problem-solving skills., • Ability to apply good judgment, strong work ethic, and integrity on the job., • Proficient in relevant PC skills., • Strong drive to make things happen and a strong "can do" attitude., • Knowledge of service environment activities including DCI, machining, assembly, test, and field service for rotating equipment., • Understand different materials and their properties., • Ability to work efficiently within the fixed time window for each manufacturing process., • Willingness to work on teams and engage in on going Continuous Improvements within facility.\n\nExperience:, • 10+ experience troubleshooting and repairing rotating equipment., • Experience in reading blueprints including GT&T, • Experience operating lifting devices, including cranes and forklifts\n\nEducation:, • High School Diploma or GED Equivalent, • Vocational/ Technical Degree preferred \n\nWork Environment: While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to wear personal protective equipment - as required by PPE Assessment. The noise level in the work environment is usually noisy as most of the activity occurs in a machine repair shop environment. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. #LI-SJ1 Equal Pay Act Statement We aim to pay our 'ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based not only on 'what' they accomplish, but also on 'how' they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. Specific benefits are dependent upon whether or not the position is part of a collective-bargaining agreement. The salary offered to a candidate is based several factors such as candidate experience and qualifications, location, as well as market and business considerations. Equal Pay Act Range Between $30.91 and $46.20

A Snapshot of Your Day Siemens Energy is seeking motivated individuals for the role of Quality Inspector, Fact Finder Distributed for the North America Service Operations Distributed organization. This position will support the Aero-Derivative, Small and Medium Gas Turbine fleet. The Quality Inspector is responsible for fact finding, visual and nondestructive testing of components, measuring of wear areas and general component dispositions. The Quality Inspector may need to work onsite alone but will typically be part of a larger maintenance crew. The Quality Inspector participates in customer meetings and interacts with the project team in US and Europe for progress reporting, technical support, and other relevant activities. This role requires a dedicated training program to become a certified Siemens Energy Quality Inspector. Training is conducted partly in the US and in Europe. How You'll Make an Impact \n • Accountable for conducting fact-finding investigations, performing visual and nondestructive testing of components, measuring wear areas, and determining the overall disposition of components. \n, • Assist onsite team with repair instructions and follow-up component inspections. \n, • Prepare and issue detailed reports regarding scope executed, the condition, repairs performed and recommendations for customer equipment \n, • Bachelor's degree or High School diploma, GED or technical vocational or apprenticeship training, combined with prior field service or equivalent related experience. \n, • 5+ years of experience with Gas Turbines, knowledge and experience with the role is an advantage, but not strictly required. \n, • Experience working in the field within industry with focus on mechanical work. \n, • Open to travel (50%+) both in the US/Canada region but also globally. \n, • Typically, the role is on active assignments approximately 70% of the year and traveling under short notice. \n Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities \n, • Supportive work culture \n, • Company paid Health and wellness benefits \n, • Paid Time Off and paid holidays \n, • 401K savings plan with company match \n, • Family building benefits \n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

DOVER PRECISION COMPONENTS: Dover Precision Components 'DPC' ('the Company') is part of Dover Corporation's ('the Parent Company') Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees' needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPC Summary: The Manual Machinist II will set up and operate manual machines, primarily lathe manual machines. The hours for this role are: 2:00 pm-10:30 pm, Monday - Friday. • Read, process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirements., • Interpret work instructions, • Identify, select and install proper tooling for operations being performed, • Calculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminum and bronze, • Intuitively understand capabilities of tooling and machinery, • Apply principles of Lean Manufacturing to reduced setup times and improve productivity, • Actively participate in daily Continuous Improvement activities\nMinimum required qualifications:, • Prior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gauges, • 5+ years experience with manual machines-- lathe and mills, • Prior GD&T knowledge, • Prior experience with rotational equipment a plus. Ideally, both Lathe and Mills or split parts, • Proven ability to hold tight machining tolerances of less than .001"\nMental/Visual/Physical Effort:, • The employee is regularly required to stand and talk or hear, • occasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smell, • must frequently lift and/or move up to 50 pounds, • Regularly exposed to moving mechanical parts, • Occasionally exposed to fumes or airborne particles and vibration, • The noise level in the work environment is usually loud\nWe offer a employee referral bonus of $2,000 for current employee and $1,000 for referred employee. Subject to conditions of referral bonus program. The ideal candidate possesses the following experience, skills, and abilities: *Note: This Job Description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by the Supervisor. All requirements are subject to change and updates. In this role you will be working with various machinery an metalworking materials in a machine shop environment including but not limited to: cutting fluids, lubricants, and metal shavings. You will be required to wear appropriate PPE such as safety glasses, steel toe boots, hearing protection, gloves, and adhere to all safety procedures. We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact [email protected] assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. Nearest Major Market: Houston Job Segment: Environmental Engineering, Machinist, Metallurgy, Industrial, Inspector, Engineering, Manufacturing, Quality

We're looking for a Clinical Programs Manager Pharmacist, someone who's ready to grow with our company. In this position you will be a key driver of the pharmacy based clinical programs, disease management initiatives, provider education, and utilization management review. This is an individual contributor role without direct reports but requires indirectly leading initiatives and other staff. This position works closely with leadership and other key personnel to execute operational goals, ensure quality control, and identify process improvement opportunities. The role serves as are source and mentor to members, network providers, employees, and external collaborators. Think you've got what it takes? Job Duties & Responsibilities • Independent utilization review of clinician administered drugs, and pharmacy appeals and collaboration with medical director team supporting benefit administration, policy development, and outcome tracking/reporting., • Manage and enhance pharmacy-based clinical and quality improvement initiatives for the health plan impacting member benefits and health outcomes, • Ensure clinical projects and tasks are completed in a timely manner, and operational goals are met. Uses data to measure quantifiable outcomes and interventions, presenting progress to leadership team. Provides support staff with guidance to ensure achievement of goals., • Manages and leads various clinical programs. Examples include but are not limited to: The Office of Inspector General (OIG) lock-in program, psychotropic medication utilization review (PMUR), retrospective drug utilization review (RDUR), prospective drug utilization review (PDUR), and others., • Coordinates and participates in performance and/or quality improvement activities. Identify process improvement opportunities. With support from the leadership team, present and execute improvement plans., • Participates in and leads multi-disciplinary work groups involving clinical operations, NCQA accreditation compliance, and pharmacy benefit manager (PBM) oversight. This includes internal and external stakeholders., • Creates pharmacy guides and training content for internal and external stakeholders., • Completes clinical and compliance tasks., • Participate in the education of parents/members, providers, employees, and pharmacy students., • Bachelor's Degree Science in Pharmacy OR Pharm. D. Doctor of Pharmacy required, • RPH - Pharmacist by the State of Texas required, • 3 years Managed care experience at a health plan or PBM working in utilization management, analytics, formulary management, and/or clinical literature required, • 1 year Managed Care Pharmacy Residency experience preferred ABOUT US Founded in 1996, Texas Children's Health Plan is the nation's first health maintenance organization (HMO) created just for children. We provide STAR/Medicaid and Children's Health Insurance Program (CHIP) to pregnant women, teens, children and adults in Houston and surrounding areas. Currently, the Health Plan has more than 375,000 members who receive care from our network of more than 1,100 primary care physicians, 3,200 specialists, and 70 hospitals. Texas Children's Health Plan is also the largest combined STAR/CHIP Managed Care Organization in the Harris County service area. To join our community of 15,000+ dedicated team members, visit texaschildrenspeople.org for career opportunities. Texas Children's is proud to be an equal opportunity employer. All applicants and employees are considered and evaluated for positions at Texas Children's without regard to mental or physical disability, race, color, religion, gender, national origin, age, genetic information, military or veteran status, sexual orientation, gender identity, marital status or any other protected Federal, State/Province or Local status unrelated to the performance of the work involved.

Description ABOUT THE POSITION Meet the Smart Safety Company At Safe Fleet our name says it all. We make fleet vehicles - and everyone in and around them - safer. Our fleet safety platform brings together best-in-class products, ground-breaking technology, and a 100-year history of fleet know-how and innovation to solve the world's biggest fleet safety problems. Our core value is safety. Without safety first, efficiency and productivity are not possible. This is true for our products, our culture, and our relationship with our community. Our vision is to reduce preventable deaths and injuries in and around fleet vehicles with a goal of ZERO accidents. We are re-defining what safety means for fleets of every type - from school buses to waste collection trucks, firefighting to utility vehicles, police cruisers to delivery vans. Whether you work in our Charlotte plant to build life-saving stop arms for school buses, or design advanced camera vision products in our Vancouver office, forge valves and high-quality nozzles to fight fires, or dream up new ways to protect fleet operators in our Corporate HQ in Kansas City, you'll contribute to our goal to keep everyone safe. We are a fast-growing manufacturing, service, and technology company with over 1700 employees in over 15 locations across Canada and the US. We're looking for motivated self-starters with innovative thinking to join our team and help us achieve our growth and performance goals. Sound like you? JOB SUMMARY The Temporary Quality Control Inspector will support the Safe Fleet Quality team for a six-month contract period under the direction of the Quality Control Coordinator. This role is responsible for performing inspections and testing of finished products, components, and repaired items to ensure compliance with established quality standards. The ideal candidate will have a working knowledge of electronics and/or mechanics, strong attention to detail, and the ability to function effectively in a fast-paced, team-oriented environment while performing cross-functional tasks. RESPONSIBILITIES \n • Perform testing of cameras, video recorders, cables, and related components in accordance with standard Quality Control (QC) inspection procedures.\n, • Verify firmware versions of electronic devices per Engineering instructions and documentation.\n, • Inspect metal and mechanical parts in accordance with QC procedures, Bills of Material (BOMs), and Engineering drawings.\n, • Ensure products are accurately identified and labeled with the appropriate status throughout the inspection process.\n, • Record product non-conformances in the company's Product Lifecycle Management (PLM) or document control system.\n, • Handle and document discrepant material in accordance with established non-conformance procedures.\n, • Complete all required quality records; update databases and maintain organized filing systems.\n, • Inspect repaired products and determine appropriate disposition based on inspection results.\n, • Conduct regular audits of 'quarantine' inventory to ensure accuracy and compliance.\n, • Perform in-process inspections as required to support production and quality objectives.\n, • Maintain a clean, organized, and sustainable 5S work environment.\n \n • Post-secondary education in Electronics, Quality Assurance, or a related field, or equivalent practical experience.\n, • Familiarity with IPC standards.\n, • Prior experience testing electronic devices and components.\n, • Working knowledge of mechanical inspections, including the ability to read and interpret Engineering drawings and Bills of Material.\n, • Familiarity with Engineering document control or PLM systems.\n, • Hands-on experience using inspection and testing tools such as multimeters, power supplies, and calipers.\n, • Experience with video surveillance equipment is considered an asset.\n, • Experience creating or maintaining inspection procedures and quality documentation is an asset.\n, • Proficiency in Microsoft Office applications, particularly Word and Excel.\n, • Strong verbal and written communication skills, with good organizational and interpersonal abilities.\n, • Ability to work independently with minimal supervision as well as collaboratively in a team environment.\n, • Self-motivated, detail-oriented, and well organized.\n\n At Safe Fleet, we do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Our core values of integrity, innovation, teamwork, customer focus, and safety guide our efforts to provide a workplace where all employees can thrive and reach their full potential.

At BrandSafway, we know our employees are our greatest asset, which is why we give them the tools, training, and resources to be successful. Come join our growing team! MATCOR by BrandSafWay is a leading cathodic protection and corrosion prevention company; providing materials and services to global clients for over 40 years. An expert in the field of cathodic protection, MATCOR offers proprietary corrosion protection products, installation, cathodic protection testing, maintenance and complete corrosion protection project management. MATCOR specializes in protecting the infrastructure of the oil and gas, electric utility, transportation and water industries. MATCOR by BrandSafWay is looking for a Corrosion Control Technician II to join our Field Services Team within the Engineering Department. Our technicians perform approximately 50 standard corrosion control methods. As a MATCOR technician, you will be trained in each of these methods and your mastery of each method will qualify you for advancement within the company. Schedule: Days Job Type: Full-time, benefits eligible Pay: $38-45/hr Responsibilities \n • Perform troubleshooting and advanced test methods to evaluate the efficacy of a cathodic protection (CP) system.\n, • Perform stray current and AC interference studies. \n, • Perform adjustments and repairs on CP systems.\n, • Oversee cathodic protection installation and survey efforts as an inspector and field trainer. \n, • Perform Operator Qualification evaluations. \n, • Perform pipeline survey methods (CIS, ACVG, DCVG, ACCA, etc.). These will typically be performed by the CP2 Technician in support of an external corrosion direct assessment (ECDA). \n, • Gather data in support of CP and AC mitigation design.\n, • Install, test, and troubleshoot CP rectifiers.\n, • Evaluate and compile data in an organized manner for submission to Engineering. Basic report writing may be required. \n, • Adhere to client and MATCOR safety requirements.\n, • Maintain client relationships, with the goal of meeting all customer expectations.\n \n • Frequent standing and walking required throughout the day.\n, • Frequent stooping, bending, pushing, pulling, reaching, and twisting required.\n, • May be required to lift and pull up to 70 pounds and must be physically capable of performing manual tasks without restriction.\n, • Computer-related activities, such as typing and viewing a computer monitor are required.\n, • Required to drive/travel to project and client sites.\n \n • AMPP CP 2 certification preferred (CP1 required). Note that MATCOR will pay for CP2 certification classes, travel, and salary while obtaining the certification for candidates with current CP1, requisite pipeline and corrosion experience.\n, • Required 3 year of experience\n, • Clean driving record\n Must be able to travel and stay near job sites for up to 3 weeks What we can offer you: \n • A comprehensive compensation package including bonuses, benefits\n, • Company truck with all equipment needed to execute job tasks\n, • Opportunities to grow and learn with the best in the industry. MATCOR will pay for AMPP Certification courses and other certifications courses that benefit the company and that contribute to our employees' career growth. MATCOR pays for the classes, travel, and salary while attending the classes. \n, • Work in a dynamic, collaborative, progressive, and high-performing team\n, • Access to a variety of career opportunities across Matcor locations\n\n #LI-CI1 BrandSafway offers a competitive benefits package that includes medical, dental, vision, life and disability insurance along with a generous 401k plan. About Us: BrandSafway is a leading global provider of access, specialized services, and forming and shoring solutions to the industrial, commercial and infrastructure markets. Through a network of ~340 strategic locations across 25 countries and ~40,000 employees, BrandSafway delivers a full range of industrial service solutions. BrandSafway supports maintenance and refurbishment projects as well as new construction and expansion plans with unmatched service from expert local labor and management. Today's BrandSafway is At Work For You® - leveraging innovation and economies of scale to increase safety and productivity, while remaining nimble and responsive. BrandSafway, including its subsidiaries, is an equal opportunity employer and does not discriminate on the basis of race, creed, color, national origin, religion, gender, marital status, sexual orientation, age, disability, special disabled or veteran status. Notice to all potential job candidates: Please be advised that BrandSafway will never require or ask for any fee from you in exchange for being considered, hired, promoted, transferred or having ongoing employment with us. It is a violation of our Code of Conduct if any employee requests any money or fee from you in exchange for tentatively special treatment or consideration. If anyone, regardless of whether an existing employee, or anyone else, requests payment of any fee in exchange for being hired into our company, you may confidentially contact our HR Compliance department at [email protected] and provide the name of the individual and any other documentation or proof of such an act.

ABOUT THE JOB - Lead Quality Inspector Location: Houston, Westplain Campus Work Environment: On-site Monday - Friday Work Schedule/Hours: Normal Business Hours Pay Range: The base pay range for this position is $65,000 - 70,000 USD. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. NACE Level II Coatings required. Position will manage a team of 5 employees, supervisory experience required. Reporting to the Quality Supervisor, you will be responsible for performing visual and precision instrument inspection of manufactured parts for dimensional and GD&T. Specialized inspections using CMM, Portable arm, Portable Scanner, for compliance with drawing requirements. In performing your work, you will interact with multiple internal departments including Manufacturing, Sales, Engineering, Purchasing, Quality, Accounting, and Shipping/Receiving. You may also work with external contractors. Daily workflow is assigned by the Quality Supervisor and/or based on project demands. Principle Duties and Responsibilities \n • Performing visual, mechanical inspection of purchased or manufactured parts, in process or finished, to determine if the parts conform to specifications, drawings, designated codes and standards.\n, • Using precision measuring and testing equipment, including calipers, height gage, micrometre's, surface plate, Articulated ARM, Optical Comparator to perform mechanical inspections.\n, • Preparing a Non-Conformance Report (NCR) for any part that does not meet specified requirements and processing it per established procedures.\n, • Document nonconformances in SAP- NCR module where needed and complete the transactions in SAP.\n, • Review and verification of materials received from vendors.\n, • Witnessing internal testing procedures to verify accuracy of results.\n, • Interpreting and executing an Inspection and Test Plan (ITP).\n, • Interfacing with third-party inspectors to verify completion of required customer requests.\n, • Handling other assigned work-related functions as deemed necessary and appropriate by your immediate supervisor.\n, • Provide on-the-job training and guidance to Level I inspection personnel.\n\n Knowledge, Skills and Abilities \n • Experienced in use of precision inspection equipment (ex., mics, callipers. Etc) to measure dimensional details as listed on drawings.\n, • Knowledge in reading & interpret blueprints, including GD&T.\n, • Experience in using and programming of Articulated ARMs is required. \n, • Experience in using and programming of CMM, Keyence, or Quick Vision systems is preferred.\n, • Knowledge of manufacturing processes and techniques, test equipment and procedures, and assembly applications.\n, • Use of hand and power tools.\n, • Strong computer skills including MS Office Suite skills, including Word, Excel, and Outlook\n, • Experience with SAP (Required)\n, • Knowledge of the valve industry is highly preferred.\n, • Ability to work in a team-oriented environment that is fast-paced and demanding.\n, • Strict attention to detail.\n, • Self-directed with excellent initiative.\n, • Proven ability to handle multiple tasks with a sense of urgency, drive and energy.\n, • Proven ability to execute tasks with drive and energy to deliver on time to deadlines.\n, • Excellent interpersonal, written and verbal communication skills.\n, • Strong organization and prioritization skills.\n\n Education and Experience \n • NACE Level II Coatings required.\n, • A high school diploma or GED equivalent.\n, • 3-5 years of inspection experience in a manufacturing environment.\n, • Certification in Liquid Penetrant, Magnetic Particle, or CWI (Preferred)\n\n WHAT WE DO Celeros Flow Technology is helping to engineer a more sustainable future by developing products for emerging carbon capture and storage applications, new nuclear and renewable energy, while supporting existing customers in decarbonizing their operations. Our full lifecycle solutions are designed to reduce emissions, optimize operational efficiency, and deliver sustainable returns. Together, we can create a safer, more resilient, and cleaner energy future. WHY JOIN OUR TEAM Providing great benefit choices to you and your family is just one of the many ways Celeros Flow Technology supports the physical, financial, and emotional well-being of the people who make our company successful - you! Key benefits include: Health Insurance (effective on start date) Dental/Vision (effective on start date) Flexible Spending Accounts/Health Savings Accounts Life Insurance/Disability/Accident/Critical Illness 401(k) Savings Plan with generous company match Tuition Reimbursement Paid time off/Generous Holiday Schedule Celeros Flow Technology is an equal-opportunity employer. All aspects of employment, including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Employment opportunities may require access to information that is subject to the export control regulations of the country in which you are applying. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities must be able to meet export control requirements.

Overview & Responsibilities Performs inspection duties to assure that all received raw materials and parts as well as fabricated parts received for repairs are in accordance with the quality standards established by Elliott Quality Assurance Procedures Manual and International Standards ISO-9001. This position works closely with Shop Operations and Shop Engineers to deliver a quality product to our customers. Has the experience and skillset to plan and oversee the workload in a safe and timely manner, with very minimal supervision or feedback. Helps train other employees in the functions and processes required. The below reflects general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Responsibilities: \n • Validate the quality of fabricated parts, and assemblies in terms of dimensional accuracy and visual verification according to acceptance criteria. Experience in generating and verify results of inspection reports.\n, • Promotes safety and quality at all times.\n, • Positive attitude and display of leadership.\n, • Flexible and responsive with a strong teamwork orientation.\n, • Maintain a clean and organized work area.\n, • Conducts themselves in a professional manner at all times when working with internal and external customers.\n, • Experienced and able to hold level II certification in nondestructive training practices and inspection processes including but not limited to: penetrant, magnetic particle, ultrasonic, eddy current or x-ray.\n, • Fully capable of reading and comprehending drawings, sketches, work scopes, and verbal instructions.\n, • Sign off on work scopes and complete supporting quality documents.\n, • Verify material test reports against Elliott specifications. Check for correct material being used to manufacture parts.\n, • Maintain and schedule calibration of shop tooling, ovens, tables, and gages and calibrate shop employee tooling.\n, • Serializes new shafts and new impellers.\n, • Fully capable of accurately assessing and documenting a visual and dimensional inspection of internal and vendor newly manufactured parts and repairs of all types of rotating equipment. Including but not limited to, inspecting parts for reverse engineering and inspecting impellers pre and post spin.\n, • Advanced knowledge and accuracy in using various measuring devices: micrometers, indicators, calipers, gauges, and other required tools necessary to perform the job.\n, • Able to accurately measure and record all critical clearances and dimensions on turbines, compressors, and any other equipment necessary.\n, • Able to pass the annual dimensional inspection test.\n, • Able to understand and process documentation associated with turbo machinery such as inspection reports, photo logs, and hold tags.\n, • Advance knowledge of lifting, rigging, crane and forklift operations.\n, • Trains other hourly employees in processes and procedures.\n, • Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.\n, • Evaluate experimental procedures and recommend changes or modifications for efficiency and adaptability to setup and production.\n, • Updates job knowledge by participating in company provided educational material, training, and reading technical publications.\n, • Accepts ownership over work performance and stays abreast of job knowledge and new skill development.\n\n Qualifications: \n • High School Diploma or Equivalency\n, • 10 + years' experience with rotating equipment / turbomachinery such as turbines and compressors\n, • Experience with tight tolerance inspections\n, • Certified in Non-Destructive Testing (NDT)\n, • Experience with Ultrasonic Testing and Magnetic Particle Testing\n\n Equal Employment Opportunity Ebara Elliott Energy is an equal employment opportunity/affirmative action employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, marital status, genetic information, disability, veteran status, or any other characteristic protected by the federal, state or local laws of the United States. Applicants and employees are protected under U.S. federal law from discrimination. To learn more, click here. To learn more about our Job Applicant Privacy Notice, please click here. No agency submissions please. NOTE: Resumes submitted to any Ebara Elliott Energy employee without a current, signed and valid contract in place with the Ebara Elliott Energy recruiting team will become the property of Ebara Elliott Energy and no search fees will be paid.

Entity: Gas & Low Carbon Energy Job Family Group: Operations Group Job Description: About Archaea Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. Introductory Employment Period Your employment with Archaea will begin with an introductory period of 90 days, starting from your first day of work. The introductory period is intended to support your transition into the role and provide an opportunity for both you and the Company to ensure a strong mutual fit. During this time, we'll work together to assess how your performance, conduct, and reliability align with the expectations of the position and the values of our organization, while also offering guidance and feedback to help you succeed. During this time, your supervisor will evaluate your ability to meet the expectations of your role, including but not limited to: \n • Consistent and timely attendance\n, • Quality and accuracy of work\n, • Ability to meet deadlines and productivity standards\n, • Adherence to company policies and procedures and the bp Code of Conduct\n, • Professional behavior and collaboration with team members and management\n\n At the conclusion of the introductory period, your performance will be reviewed. If you successfully demonstrate satisfactory performance consistent with the criteria set forth above, your continued at-will employment will be confirmed. If, however, you do not successfully demonstrate performance consistent with the criteria set forth above, your employment with Archaea will be terminated at the end of the probationary period. Note that, your employment with Archaea is at-will both during the probationary period and if you successfully complete the probationary period. At-will means that either you or Archaea may terminate your employment at any time, with or without cause, and with or without prior notice. About the role As a Quality Control Inspector at Conifer, you will play a critical role in ensuring that our products meet the highest standards of safety, reliability, and compliance. Your primary objective is to perform precise inspections and testing during all stages of production: ensuring our products meet rigorous quality, safety, and environmental standards. This role is essential to Conifer's commitment to quality at every stage of production. Your work helps protect our brand driving operational excellence across the board. You'll join a hands-on, high-performance team that thrives on collaboration, accountability, and continuous improvement. Key stakeholders include Operations, Engineering, EHS, and Supply Chain - working together to resolve issues quickly and drive quality from the ground up. What sets this team apart? A strong culture of mutual respect, technical curiosity, and pride in building something that matters. You'll be empowered to make a real impact while growing your technical skills. Key accountabilities \n • Follow all safety rules and report any unsafe conditions to the Leads or supervisors.\n, • Perform incoming, in process, and final inspections of materials, components, and finished products.\n, • Verify heat codes, Material Test Reports (MTRs), certificates of conformity, and other test documentation for accuracy.\n, • Conduct visual, dimensional, and functional inspections to verify conformity to specifications and quality standards.\n, • Read and interpret engineering drawings, manufacturing instructions, and technical specifications.\n, • Ensure products meet internal quality standards and customer requirements.\n, • Monitor production operations to ensure ongoing compliance with company specifications.\n, • Ensure inspection tools and equipment are properly calibrated and maintained; report issues promptly.\n, • Accurately record inspection data in logs, databases, or quality systems.\n, • Generate inspection reports and document deficiencies or non conformances.\n, • Prepare non-conformance reports (NCRs) and support root cause analysis activities.\n, • Maintain traceability of inspected items, including labeling, documentation, and records required for audits.\n, • Develop and maintain inspection documentation, including job travelers, inspection forms, and quality records.\n, • Work closely with production, engineering, and quality teams to resolve quality issues.\n, • Provide feedback to supervisors and engineering regarding quality trends and recurring issues.\n, • Train and mentor others as needed.\n, • Support audits by supplying inspection records and demonstrating compliance.\n, • Assist with administrative tasks, troubleshooting customer requests, and performing tasks as assigned.\n, • Participate in quality improvement initiatives.\n, • Identify opportunities to improve inspection methods, documentation practices, and manufacturing processes.\n, • Suggest and help implement process enhancements to improve product quality and operational efficiency.\n\n Essential education • High School diploma or general education degree (GED).\n Essential experience \n • Strong understanding of safety standards.\n, • Basic computer skills (MS Office).\n, • Hands on inspection experience in a manufacturing environment.\n, • Proficient with measurement tools and visual inspection techniques.\n, • Experience interpreting technical drawings, P&ID's and specifications.\n, • Experience reviewing material test reports.\n, • Experience working with hand tools, welding equipment, saws, punch press, drill press air tools, grinders, forklift, and overhead crane operations.\n, • Possess a positive attitude, ability to work well within a team and a strong work ethic.\n, • Excellent communication skills.\n, • Strong attention to detail with technical and math abilities.\n, • Demonstrated ability to apply critical thinking to identify quality issues and recommend effective corrective actions.\n, • Working knowledge of non-conformance reporting and root cause analysis.\n, • Familiarity with AWS, ASME & ISO 9001 quality standards and systems.\n\n Desirable criteria \n • 3-5 yeas welding GMAW/FCAW/SMAW/GTAW preferred\n, • AWS - Certified Weld Inspector preferred\n, • ASNT - Level 2 VT preferred\n Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today's energy system and build out tomorrow's, apply today! How much do we pay (Base)? 28- $31 *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting. This position offers paid vacation depending on your years of relevant industry experience and will range from 120 • 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays. You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks' paid leave for the birth or adoption of a child. Learn more at benefits@bp. Join our industry-leading team and you'll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to: • 401K Program, • Health, Vision, And Dental Insurance, • Life Insurance, • Short-Term Disability, • Long-Term Disability Apply today! Travel Requirement Some travel may be required with this role, this is negotiable Relocation Assistance: This role is not eligible for relocation Remote Type: This position is not available for remote working Skills: Control of Work, Cost-conscious decision-making, Maintenance general, Procedures and practices, Reliability general, Risk Management, Safety Leadership, Turnaround general Legal Disclaimer: We are an equal opportunity employer. We do not discriminate on the basis of protected characteristics like race, religion, color, sex, national origin, sexual orientation, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp's recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

As a global medtech company, we are driven by our Vision of changing the trajectory of lives for a new day and our Mission to create ingenious solutions that ignite patient turnarounds. Our relentless commitment to patients and strong legacy of innovation in healthcare are the foundation of our future. If you're looking for a new chance, a new beginning, a new trajectory, LivaNova is where your talent can truly thrive. Join our talented team members worldwide to become a pioneer of tomorrow-because at LivaNova, we don't just treat conditions - we aspire to alter the course of lives. The Quality Inspector is responsible for performing incoming inspections on raw components used during manufacturing of in-process subassemblies and finished products. Job Duties * Inspects or tests components and raw material according to written inspection procedures * Inspects electronic or mechanical assemblies, subassemblies, and component parts for compliance with acceptance criteria as defined by specifications, drawings, samples, or illustrations * Examines units visually, with microscope or other magnifying device, to determine physical defects according to written inspection procedures. * Compares assemblies with drawings, parts lists, illustrations, and/or samples to verify conformance and detect assembly errors * Examines the alignment of parts and verifies installation of hardware on assemblies and subassemblies * Measures parts for conformance to specified dimensions using measuring instruments or equipment * Accepts or rejects materials / product inspected based on conformance to acceptance criteria * Records inspection data on appropriate forms, logs, and/or in computer databases * Maintains controlled document files and test records in a timely and accurate manner * Coordinates calibration of all test equipment and fixtures * Monitors critical equipment and instrumentation to ensure proper operation and calibration * Identifies and controls nonconforming material and defective products until the material has been quarantined * Responsible for identifying, evaluating, recording, and initiating correction or prevention of quality related problems * Responsible for identifying and controlling nonconforming material and defective products by segregation or product identification * Performs other duties as may be required by management Minimum Requirements * High school graduate or equivalent * Exposure to ISO/FDA regulations, Quality Inspection Techniques and Workmanship Standards * Proficiency in MS Office * Good verbal and written communication skills Desired Skills * Metrology skills, optical comparator use, metric ability, inspection and instrumentation experience, visual measuring equipment i.e. Keyence, Micro-vue. Physical Requirements * Required to perform the essential duties and responsibilities of the job. * Must maintain near-sight acuity, with or without corrective lenses, adequate to successfully perform the required job functions as defined withinthe quality-controlled processes. Pay Transparency * A reasonable estimate of the hourly rate for this position is $22-$27 per hour. Pay ranges may vary by location and are awarded based on experience. Employee benefits include: * Health benefits - Medical, Dental, Vision * Personal and Vacation Time * Retirement & Savings Plan (401K) * Employee Stock Purchase Plan * Training & Education Assistance * Bonus Referral Program * Service Awards * Employee Recognition Program * Flexible Work Schedules

Responsibilities Cypress Creek Hospital is a free-standing 128-bed, acute care psychiatric hospital located in north Houston, TX, and minutes south of The Woodlands. Cypress Creek Hospital features individual units for adolescents and adults and offers inpatient acute care, partial hospitalization, and intensive outpatient programs. On average, over 10,000 patients receive care from our compassionate health care team each year at Cypress Creek Hospital. We are comprised of a tenured dedicated team of Psychiatrists, Nurses, Social Workers, Mental Health Technicians and Support Staff where delivering compassionate care is our mission. To learn more about Cypress Creek Hospital visit our website at: ___ We currently have opportunities for Floor Registered Nurses - Day Shift - 7am - 7:30pm Position Summary The RN is responsible for implementing and evaluating patient care on the Adult/Adolescent/Geriatric units; for providing supervision and guidance for nursing staff members; for assuming responsibilities delegated by the Chief Nursing Officer, Assistant Chief Nursing Officer, or House Supervisor; for personal and professional growth and development. Performs other duties as assigned. Job Duties • Completes patient admissions process, including nursing assessment., • Documents ongoing patient assessments/progress clearly and concisely as required by hospital and regulatory agency standards., • Medication management - administer medication and medical treatment as prescribed by a physician., • Participates as member of interdisciplinary treatment team., • Ensures nursing interventions., • Provides milieu management and unit team leadership., • Provides appropriate nursing intervention/documentation in crisis situations., • Reports unsafe conditions., • Provides age-specific communication, limit setting and interventions., • Provides health education to patients and their families., • Prepares and adheres to facility patient discharge process., • Interacts with patients and staff in professional manner, promotes teamwork and demonstrates Service Excellence, • Attends mandatory staff meetings., • Performs other duties as assigned. Benefits for Registered Nurses include: • Challenging and rewarding work environment, • Competitive Compensation & Generous Paid Time Off, • Excellent Medical, Dental, Vision and Prescription Drug Plans, • 401(K) with company match and discounted stock plan., • SoFi Student Loan Refinancing Program, • Career development opportunities within UHS and its 300+ Subsidiaries!, • Tuition Assistance One of the nation's largest and most respected providers of hospital and healthcare services, Universal Health Services, Inc. (UHS) has built an impressive record of achievement and performance. Growing steadily since its inception into an esteemed Fortune 500 corporation, annual revenues during 2025 were $17.4 billion. In 2026, UHS was again recognized as one of Fortune World's Most Admired Companies and in 2025, was listed in Forbes ranking of America's Largest Public Companies. Headquartered in King of Prussia, PA, UHS has approximately 101,500 employees and continues to grow through its subsidiaries. Operating acute care hospitals, behavioral health facilities, outpatient facilities and ambulatory care access points, an insurance offering, a physician network and various related services located in 40 U.S. states, Washington, D.C., Puerto Rico and the United Kingdom. For additional information visit ___. Qualifications Registered Nurse Job Requirements • Graduation from an accredited nursing program. Licensed by the Board of Nurse Examiners for the State of Texas (or licensed in a compact state)., • One-year psychiatric nursing experience preferred., • CPR and hospital de-escalation certifications which can be obtained during orientation., • Must be able to complete new hire requirements such as a nationwide background check and pre-employment drug screen. All UHS subsidiaries are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates. UHS subsidiaries are equal opportunity employers and as such, openly support and fully commit to recruitment, selection, placement, promotion and compensation of individuals without regard to race, color, religion, age, sex (including pregnancy, gender identity, and sexual orientation), genetic information, national origin, disability status, protected veteran status or any other characteristic protected by federal, state or local laws. Avoid and Report Recruitment Scams We are aware of a scam whereby imposters are posing as Recruiters from UHS, and our subsidiary hospitals and facilities. Beware of anyone requesting financial or personal information. At UHS and all our subsidiaries, our Human Resources departments and recruiters are here to help prospective candidates by matching skill set and experience with the best possible career path at UHS and our subsidiaries. During the recruitment process, no recruiter or employee will request financial or personal information (e.g., Social Security Number, credit card or bank information, etc.) from you via email. Our recruiters will not email you from a public webmail client like Hotmail, Gmail, Yahoo Mail, etc. If you suspect a fraudulent job posting or job-related email mentioning UHS or its subsidiaries, we encourage you to report such concerns to appropriate law enforcement. We encourage you to refer to legitimate UHS and UHS subsidiary career websites to verify job opportunities and not rely on unsolicited calls from recruiters.

Job Description The QC Inspector position is responsible for inspections against the internal quality system (QMS), customer requirements, and industry standards. The QC Inspector is also responsible for inspecting raw material, inspecting finished product, internal process audits, and ensuring general customer satisfaction. Responsibility Including but not limited to: • Use of precision tooling and measuring devices such as calipers, micrometers, coating thickness gauge, rulers, tape measures, stamping dies, extensometers, and many more., • Writing and filling out QC reports and digital data entry., • Use of MS office and internal digital programs., • Perform FAI reports and communicate efficiently on the results of FAI., • Read and interpret engineered drawings., • Use GD&T to perform product evaluations., • Inspect to engineered drawings and determine if a product is within tolerance., • Issue NCR’s against any raw material, process, or finished good product that’s not within the required specifications., • Will need to read and understand industry standards such as ASTM, ANSI, API, and ISO., • Ensure the achievement of quality objectives of the department., • Ensure 5S activities and their guidelines are adhered to., • Effectively communicate with peers, management, and customers., • Must have at least a High School Diploma., • Must be willing to work in a fast-paced environment., • Can work in a team and is a team player., • 1-3 years of experience is required, • Use of precision measuring devices., • Willingness to learn., • Is flexible and can work overtime., • Experience with ISO 9001., • Can read engineered drawings., • Proficient with MS Office., • Can read, understand, and interpret industry standards., • Can write SOP’s, JHA’s, and procedures.

Job Description Trailer Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for a Registered Cargo Tank Inspector (HM 183) with 2 to 5 years of tank trailer repair experience for our Houston, TX. location! Address: 7600 East Sam Houston Parkway North, Houston, TX. 77049. Shift Hours: Monday through Friday 7:00am- 3:30pm CT. Pay Range: $30.00 to $41.00 per hour, dependent on experience. (Skill-based pay rate reviews and potential increases every 6 months.) Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • TIG aluminum, stainless or carbon welding experience (optional), • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Job Purpose The Final Inspector will ensure all end products conform to contractual and regulatory requirements. Duties & Responsibilities -Assist with final product both visual and chemical analysis. -Knows how to use micrometers, calipers, Pi tapes and Snap gages. -Assist the Quality Manager in maintaining the final inspection. -Confirmation that real weight agrees expected weight. -Check that all WMS machinery is properly serviced before starting up. -Assists in repair and replacement of WMS equipment during maintenance shutdowns. -The employee is responsible for assisting with documentation and/or technical devices for recording production and findings. -WMS equipment calibration -Communicating with Supervisor about any problems with material and equipment. -Assist in Housekeeping, and Quality. -Assist in the training of plant personnel. -Inspect final product. -Employee must report to his immediate supervisor for briefing on daily tasks. -Employees must maintain good housekeeping ethics. Work areas must be free and clear of debris. -Other duties as assigned. Qualifications / Competencies -Education: o High School Diploma or GED preferred but not required. -Years of Experience: o1 years’ experience in quality control or a 2-year college degree in the technology field. -Job Knowledge: o At least Knowledge and experience within the OCTG pipe industry is preferable. o Reading and writing of English as well as solid arithmetic and Computer skills. o Ability to organize vast amounts of data and multi-task several priorities with excellent time management. o Capable of working MS Office suite, especially Excel, and the ability to grasp an ERP System. -Personal Competencies: o Excellent verbal and written communication skills. o The visibility of work requires attention to detail, excellent organizational skills, and discretion with confidential information. o Employees must be able to work with a flexible or rotating schedule which may require overtime when needed. -Safety: o Understands all applicable location safety rules and regulations and makes sure that all are being followed. Physical Requirements & Working Conditions • Working conditions are normal for a manufacturing environment., • Loose-fitting clothes and jewelry are not permitted on site., • The ability to lift 25/50 pounds regularly., • The ability to respond quickly to sounds., • The ability to move safely over uneven terrain or in confined spaces., • The ability to see and respond to dangerous situations., • The ability to safely climb ladders while carrying 40 pounds., • The ability to work in loud, hot environments/extreme weather while wearing required PPE., • Ability to see 20-20 when corrected., • Ability to identify and distinguish colors.

Job DescriptionSalary: Note: Accepting resumes. The Electrical & Instrumentation Inspectorreports directly to the Chief/Construction Engineer. The Electrical & Instrumentation Inspector's duties and responsibilities require that they will be both knowledgeable and experienced in all phases of pipeline construction and inspection. Primary Functions: • Performs duties as designated by the Chief/Construction Engineer in accordance with job requirements outlined in the assigned activity, uphold NEC and ISA codes and the Client Company codes and Standards., • Advise Construction Engineer of all decisions, problems, and possible alternatives in the assigned activities, and suggestions as to solutions to field problems., • Assures that all construction activities are in accordance with Client specification codes and standards and that the latest specifications as stated in the National Electrical Code are strictly adhered to., • Assure that all safety procedures are adhered to., • Receive and thoroughly inspect all mechanical, electrical and instrumentation equipment and assure that it arrives in acceptable condition., • Assure that all Calibration equipment was recently calibrated to national standards., • Become thoroughly familiar with all electrical and instrumentation hook-ups and their functions., • Record and maintain accurate records concerning damage to equipment and take steps to repair or replace, if necessary. Qualifications: • Minimum of five (5) years experience as an Electrical Inspector of which two years are of general pipeline or plant experience with an emphasis in electrical power and control system construction methods., • Essential to possess a working knowledge of the National Electrical Code and ISA standards., • Has proven judgment and decision-making skills., • Ability to read and interpret piping and instrumentation drawings pertaining to the construction project. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visitAPI | API 1169 - Pipeline Construction Inspectorfor more information. For more information about EnSiteUSA, please visit:

Job Description Procon is a top-ranked construction management and technology consulting firm with 25 years of experience delivering high‑impact projects across the U.S. and worldwide. An ENR Top 100 CM/PM firm for five consecutive years, we specialize in program management, project controls, commissioning, and virtual intelligence—and offer an excellent platform to grow your career while shaping the future of the built environment. Procon is seeking a Construction Inspector for NASA projects, based primarily at the Johnson Space Center in Houston, TX. The successful candidate will have a minimum of 5 years of experience in construction inspection related to complex aerospace projects. The position requires the candidate to review engineering drawings and specifications, monitor ongoing construction activities, perform inspections, and ensure that all work complies with established quality standards. THIS IS A NIGHT SHIFT ROLE*** Requirements Qualifications & Skills • Minimum of 5 years of construction inspection experience, preferably within the aerospace or complex engineering environment., • Strong comprehension of engineering principles and construction methods., • Detail-oriented with excellent problem-solving skills., • Bachelor’s degree in Construction Management, Engineering, or a related field is required., • Experience with project management software (e.g., Prolog, Primavera) is a plus. Certifications • OSHA 30-hour construction safety certification., • Any relevant NASA-specific certifications are a plus., • NICET certification in construction inspection is preferred., • Specialized training related to aerospace construction and inspections is an advantage. Responsibilities & Duties • Inspect roofing and related building envelope systems during all phases of construction, repair, and maintenance at NASA facilities., • Review construction documents, shop drawings, and material submittals to ensure compliance with project specifications and NASA requirements., • Monitor contractor work for compliance with codes, safety regulations, and project schedules., • Conduct field inspections and document findings with detailed reports, including photographs and recommendations., • Verify installation methods, material quality, and workmanship meet contractual and industry standards (NRCA, ASTM, OSHA, and NASA technical requirements)., • Coordinate with project managers, engineers, contractors, and safety personnel to resolve technical issues., • Provide input on corrective actions for deficiencies or non-compliant work., • Maintain accurate daily inspection logs and submit progress updates. Salary commensurate with experience. Interested and qualified candidates please submit a cover letter and a resume. Procon offers competitive salaries and a comprehensive benefits package, including full medical/dental insurance and 401(K) plan. Procon is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, or any other protected factor.

Job Description ASNT - Level III Tech - MT, PT, VT, UT Summary: ACSI is seeking a full-time ASNT - Level III Technician to support our Houston Facility. Responsibilities/Duties: ASNT - Level III Technician - MT, PT, VT, UT • Experience teaching classes, administering written and practical exams, and maintaining certifications. • Perform examinations of materials in accordance with procedures, codes, standards, and specifications. • Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees • Interface with department managers and clients to determine the scope of work and work priorities in order to meet customer expectations. • Be able to prepare written instructions and to organize and report the results of examinations. • Work independently and support team members. Perform other job-related tasks as needed and assigned by supervisors. Minimum Requirements/Qualifications: • ASNT - Level III Technician – Meet the minimum requirements of a Level III Technician to attain certifications for MT, PT, UT and VT within 6 months from hire date; provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments (ASME, NAVSEA, AWS D1.1 ASTM E164) and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems. All applicants require the following: • Ability to learn and comply with all company policies and procedures. • Excellent communication skills, written and verbal. • Applicants must pass a drug screen and a background check. Work Conditions: • Must be able to wear safety equipment as required by the safety department for personal protection. • Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc. • Work in confined spaces, which will require crawling, stooping, climbing, etc. • Work around operating equipment and industrial environments. • Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc. • Work shifts up to 12 hours/day and 7 days/week • Ability to lift and carry 100 pounds. Skills: ASNT - Level III Tech - MT, PT, VT, UT - United States Secondary job functions: • Replace or assist other workers as deemed necessary., • Perform other tasks as assigned by a supervisor or manager. Job Posted by ApplicantPro

Job DescriptionCompany Description At QIMA, we’re on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you’d like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: • Check email daily in order to receive inspection documents and guidelines;, • Attend inspections on time and communicate with supplier in a professional way;, • Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures;, • Fulfill inspection reports according with company procedures and time lines.Qualifications Think you have what it takes? First of all, we want someone with: • Experience in quality management, especially hardlines / furniture / electronics (2 years or more);, • Knowledge of AQL standards, as well as relevant safety and quality regulations;, • Good command of English (spoken and written);, • Great attention to detail and strong professional ethics. Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now with your CV in English and we can write the next chapter of the QIMA story together.

Job DescriptionIndustrial Inspection & Analysis is searching for an ANSI Inspector to join our Lifting Services team in Texas. The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure that they are in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including • Acoustic emission tests to assess the integrity of the fiberglass and steel structure, • Magnetic particle inspections to identify surface cracks on ferrous metals, • Torque test all critical fasteners, among others., • Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications • Mechanically inclined., • Basic knowledge of mechanical processes, movement, and assembly., • Basic knowledge of hand tools., • Proficient computer skills., • Strong communication skills., • Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution., • Must be able to work independently with some direction from management., • Problem solver, detail oriented. Job Requirements • Able to stand, sit, squat, climb, crawl and twist for extended periods of time., • Ability to lift up to 50 pounds., • Must be punctual, accountable, and provide high quality customer service., • Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays., • Must have valid driver’s license and be able to pass a background check and drug screen. We offer medical, dental, and vision benefits, a 401K plan, and paid time off and holidays.

Job DescriptionBenefits: • Hospital Indemnity Insurance, • Critical Illness Insurance, • Accident Insurance, • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Yard Coordinator C&D Scrap Metal Recyclers Houston, TX About the Role C&D Scrap Metal Recyclers is seeking a detail-oriented and reliable Quality Control Inspector to join our team. This position plays a key role in maintaining the accuracy, quality, and efficiency of our daily scale / yard operations. The ideal candidate will assist with traffic flow within the facility, ensure correct grading and documentation of materials, support customer service initiatives, and help maintain overall operational integrity. Key Responsibilities Collaborate with the Non-Ferrous Retail Center to coordinate material movement and support cross-functional teamwork. Inspect and grade incoming and outgoing scrap materials accurately. Record and document grading results and material adjustments with precision. Work closely with Scale Operators to verify the accuracy of all loads and shipments. Direct customers to appropriate offloading areas and assist customers with unloading while delivering professional, courteous service. Ensure compliance with company policies related to material handling and customer processing. Proactively identify and extract high-value materials during customer unloading to maximize recovery. Assist with additional tasks and duties as needed to support operational goals. Working Conditions & Physical Requirements Must be able to work outdoors in various weather conditions (heat, cold, rain, etc.). Ability to stand, walk, and move continuously throughout the shift. Comfortable working in an industrial, fast-paced environment. Position Details Full-time. Occasional travel to satellite locations may be required. Candidate Requirements Strong customer service and communication skills. Exceptional attention to detail and organizational abilities. Must be Fluent in English and Spanish to ensure clear communication with a Diverse Customer Base. Why Join C&D Scrap Metal? C&D Scrap Metal is a rapidly growing company in the Houston market. We are committed to promoting from within and providing opportunities for career growth. If youre looking to join a team that values hard work, integrity, and teamworkand youre passionate about helping build a strong, customer-focused brandwe want to hear from you!

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off Responsibility: • Use of precision tooling and measuring devices such as calipers, micrometers, coating thickness gauges, rulers, tape measures, stamping dies, extensometers, and many more., • Writing and filling out QC reports and digital data entry., • Use of MS office and internal digital programs., • Perform First Article Inspection reports and communicate efficiently on the results of FAI., • Read and interpret engineered drawings., • Use GD&T to perform product evaluations., • Inspect engineered drawings and determine if a product is within tolerance., • Issue NCRs against any raw material, process, or finished good product thats not within the required specifications., • Will need to read and understand industry standards such as ASTM, ANSI, API, and ISO., • Ensure the achievement of quality objectives of the department., • Ensure 5S activities and their guidelines are adhered to., • Effectively communicate with peers, management, and customers.Experience and requirements:, • Must have at least a High School Diploma., • Must be willing to work in a fast-paced environment., • Experience working in an industrial setting., • Use of precision measuring devices., • Excellent problem-solving skills and the ability to identify root causes of quality issues., • Strong communication skills to collaborate effectively with other teams., • Willingness to learn., • Candidates must pass a drug test as part of the hiring process.An ideal candidate will also have:, • Experience with ISO 9001., • Read engineered drawings., • Proficient with MS Office., • Can read, understand, and interpret industry standards. Can write SOPs, JHAs, and procedures.

A successful candidate will inspect structural components at customer locations and ensure that structural deficiencies are recorded for customer use.The gathering of field measurements, conducting inspections and observing existing conditions in a heavy industrial environment is a primary component

Candidate must stay familiar and up to date with different editions of the International Building Codes. Our employees are our greatest asset, with exceptionally certified individuals in all departments, including Planning & Zoning, Code Enforcement, Fire Prevention, and Engineering, as well as full

As a global medtech company, we are driven by our Vision of changing the trajectory of lives for a new day and our Mission to create ingenious solutions that ignite patient turnarounds. Our relentless commitment to patients and strong legacy of innovation in healthcare are the foundation of our future. If you're looking for a new chance, a new beginning, a new trajectory, LivaNova is where your talent can truly thrive. Join our talented team members worldwide to become a pioneer of tomorrow-because at LivaNova, we don't just treat conditions - we aspire to alter the course of lives. The Quality Inspector is responsible for performing incoming inspections on raw components used during manufacturing of in-process subassemblies and finished products. This is a great opportunity for someone who is currently pursuing a degree in engineering and has an interest in the medical device manufacturing industry. Primary Activities * Inspects or tests components and raw material according to written inspection procedures * Inspects electronic or mechanical assemblies, subassemblies, and component parts for compliance with acceptance criteria as defined by specifications, drawings, samples, or illustrations * Examines units visually, with microscope or other magnifying device, to determine physical defects according to written inspection procedures. * Compares assemblies with drawings, parts lists, illustrations, and/or samples to verify conformance and detect assembly errors * Examines the alignment of parts and verifies installation of hardware on assemblies and subassemblies * Measures parts for conformance to specified dimensions using measuring instruments or equipment * Accepts or rejects materials / product inspected based on conformance to acceptance criteria * Records inspection data on appropriate forms, logs, and/or in computer databases * Maintains controlled document files and test records in a timely and accurate manner * Coordinates calibration of all test equipment and fixtures * Monitors critical equipment and instrumentation to ensure proper operation and calibration * Identifies and controls nonconforming material and defective products until the material has been quarantined * Responsible for identifying, evaluating, recording, and initiating correction or prevention of quality related problems * Responsible for identifying and controlling nonconforming material and defective products by segregation or product identification Minimum Requirements * High school graduate or equivalent * Must be currently enrolled in a college or university program and pursuing a degree in an engineering discipline (e.g. biomedical, mechanical, manufacturing, etc.) * Exposure to ISO/FDA regulations, Quality Inspection Techniques and Workmanship Standards * Proficiency in MS Office * Good verbal and written communication skills Physical Requirements * Required to perform the essential duties and responsibilities of the job. * Must maintain near-sight acuity, with or without corrective lenses, adequate to successfully perform the required job functions as defined withinthe quality-controlled processes. Pay Transparency * A reasonable estimate of the hourly rate for this position is $22 - $25 per hour. Pay ranges may vary by location. Location and Shift * This position is located onsite in the Clear Lake area (Southeast Houston) * Work hours will be between 8:00a and 5:00p, and will be dependent upon your class schedule * We estimate that this job will require roughly 20 hours per week with a potential increase over the summer (if your schedule allows)

The successful candidate shall have basic knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national laws, codes, and statutes; basic knowledge of materials, methods, and that tools involved in construction methods, procedures, materials, and

Sciens Building Solutions is seeking a Fire Alarm Inspector to provide inspection and maintenance capabilities.

Perform advanced (senior-level) military construction inspection work for the Construction and Facilities Management Office (CFMO) primarily for the Southeast Region. Experience: Five (5) years of experience in performing construction compliance and enforcement inspection and analysis work or constr

Job Description Night Shift The QC Inspector will work closely with departmental managers, production staff, and suppliers you will take responsibility to ensure quality, aiming to minimize the costs of reworking or waste and maximize customer satisfaction with products. DUTIES: · Monitor and report Quality Assurance and Quality Control aspects of required work scope package(s). · Control and ensure the accuracy of all project documentation · Control and ensure the accuracy of all required component parts · Completion of various inspection and quality reports · Mechanical and inspection report completion to the required standard. · Ensure the traceability of all parts required and documentation trail are in place. · Record and document traceable information which will be required to certify the manufacturing process, to the highest standards. · Identify engineering faults and process inputs throughout key stages of a project’s development. From order acknowledgement to final inspection · Recommend adjustments to the process What we look for: · EDUCATION: MINIMUM HIGH SCHOOL DIPLOMA OR GED · CNC machine background (must) · Experience in reading and interpreting engineering drawings · Use of measuring tools for critical dimensions Company DescriptionAbout us: Express works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career. Express Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job. In compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discriminaAbout us:\r\n\r\nExpress works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career.\r\n\r\nExpress Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job.\r\n\r\nIn compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discrimina

Job Description Will be first point of contact to service customers seeking repairs and maintenance. Job responsibilities may include but not limited to quoting jobs, writing estimates, assigning jobs to shop techs, overseeing and managing a job's progress or status, entering notes and recording diagnostics for jobs, tracking parts, maintaining supplies/accessories and preparing replacement orders as needed, ensuring all cost has been inputted and posted, opening and closing work orders, ensuring techs are appropriately clocking in and out of work orders, explaining work done and gathering approvals from customers, collecting payment and signatures before releasing equipment, entering and following up on warranties per vendor, managing DOTs, maintaining service dept filing and records, assisting office with answering incoming calls, and communicating regularly with Corporate Office, Vendors, and Customers as needed via phone and/or email. May need to assist with moving equipment via forklift or yard mule. Will need basic knowledge of Microsoft Office including Excel, Teams, and Outlook. General understanding of mechanical terms and knowledge on quoting job hours for trailer repairs is preferred, or equivalent work experience. Being bilingual and having Forklift, Yard mule, or DOT inspector experience is a plus. Additional skills will impact the negotiable salary listed below. This job position entails working in the yard and/or shop as well as inside the office. They will need to be organized and have great time management. Company DescriptionJ&B Pavelka, Inc. has been in business since 1997. We strive to retain our customers and our employees. We are a New & Pre-Owned Heavy Trailer Dealer and a Pre-Owned Heavy Truck dealer in the Corpus Christi, Houston, and Burnet market. We are distributors for 16 different trailer manufactures.J&B Pavelka, Inc. has been in business since 1997. We strive to retain our customers and our employees. We are a New & Pre-Owned Heavy Trailer Dealer and a Pre-Owned Heavy Truck dealer in the Corpus Christi, Houston, and Burnet market. We are distributors for 16 different trailer manufactures.

Job Description We are seeking a proactive and detail-oriented Quality Engineer Assistant to support our Out of Box Audit (OBA) and manufacturing quality activities. In this role, you will actively contribute to failure analysis, corrective action implementation, inspector certification, and cross-functional quality improvement initiatives within a high-volume production environment. This position is ideal for a technically skilled professional with strong analytical capabilities and hands-on experience in testing systems and quality processes. Key Responsibilities OBA & Inspection Support * Support and oversee daily activities of the OBA (Out of Box Audit) team * Supervise onboarding and certification of OBA inspectors * Regularly evaluate inspector competency levels and deliver training on new processes * Provide direct technical guidance to the OBA team when required Failure Analysis & Corrective Actions * Initiate and lead immediate root cause analysis of OBA and test-related defects * Collaborate closely with Engineering, Test Engineering, and Quality teams * Define the scope of potentially affected products * Propose corrective and preventive actions to eliminate recurrence * Verify effectiveness and ensure no unintended product impact Reporting & Quality Monitoring * Maintain and review OBA defect database accuracy * Prepare and update analysis reports, especially in case of line-stopping issues * Monitor key performance indicators, including: * OBA-related defect ratio * Recurrence rate of defects * Inspector certification status MRB & Test Coordination * Support MRB (Material Review Board) technicians in analyzing production fallout * Ensure appropriate test methods are applied * Align testing methodologies with Test Engineering Cross-Functional Communication * Maintain continuous communication with Quality and Test Engineering * Provide clear updates on analysis results and improvement actions * Escalate issues to the Quality Manager when required Qualifications & Experience * Technical (Technician-level) qualification * Several years of experience with production test systems (e.g., IBM, Lenovo environments preferred) * Strong hands-on knowledge of manufacturing testing processes * Solid understanding of Quality Management Systems (ISO 9001) * Knowledge of Environmental Management Systems (ISO 14001) is an advantage * Basic English language skills Key Competencies * Strong analytical and structured problem-solving skills * Ability to conduct thorough and consistent root cause investigations * Proactive and improvement-driven mindset * High stress tolerance and adaptability in a fast-paced manufacturing environment * Strong administrative skills, including proficiency in Microsoft Office and document control systems * Excellent communication and collaboration skills * Commitment to continuous professional development What We Offer * Opportunity to work in a dynamic manufacturing environment * Cross-functional exposure within Quality and Engineering * Professional development and certification support * Competitive compensation package Powered by JazzHR zQnpCMe26s

Job Description Job Title: Quality Control Inspector Job Summary We are seeking a detail-oriented Quality Control Inspector to support a leading industrial manufacturing organization. This role is responsible for ensuring products meet established quality standards, customer specifications, and applicable codes throughout the fabrication and production process. The ideal candidate has a strong background in inspections, documentation, and compliance within a manufacturing or industrial environment. Pay $26.00-$32.00 DOE 6AM-6PM Houston, Texas 77051 Key Responsibilities • Perform quality inspections on incoming materials, in-process work, and finished products, • Review drawings, specifications, and quality requirements to ensure compliance, • Conduct visual, dimensional, and functional inspections using standard measuring tools, • Verify welding, fabrication, and assembly processes meet required standards and codes, • Document inspection results and maintain accurate quality records and reports, • Identify non-conformances and work with production teams to support corrective actions, • Ensure adherence to internal quality procedures, safety standards, and customer requirements, • Support audits, quality reviews, and continuous improvement initiatives, • Communicate quality issues clearly and professionally with internal teams Required Qualifications • High school diploma or GED required; technical training or certification preferred., • 2+ years of experience in quality control or inspection within manufacturing or fabrication., • Ability to read and interpret engineering drawings and specifications., • Familiarity with inspection tools (calipers, micrometers, gauges, etc.), • Knowledge of quality standards and inspection practices., • Strong attention to detail and documentation skills., • Ability to work independently and in a team environment. Preferred Qualifications • Experience in industrial, energy, or heavy manufacturing environments, • Welding inspection experience (AWS, CWI, or equivalent preferred but not required), • Knowledge of ASME, API, or similar industry standards, • ERP or quality management system experience, • VT (Visual Testing) – required, • PT (Liquid Penetrant Testing), • MT (Magnetic Particle Testing), • UT (Ultrasonic Testing), • RT (Radiographic Testing) Work Environment • Manufacturing or fabrication shop setting, • May require standing, walking, bending, and lifting up to specified limits, • Use of PPE required Please send resume to or text to 346-870-9966. Company DescriptionAt KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.At KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.

Job Description Firetrol Protection Systems is a national leader in fire protection and life safety services, founded in 1984. We are seeking a dedicated and experienced Multi Licensed Inspector to join our team in the Pasadena, TX area. The ideal candidate will be responsible for conducting inspections, testing, and preventative maintenance of fire protection systems. In this role, you will: • Perform comprehensive inspections according to industry standards and regulations for fire protection systems including sprinklers and alarms., • Diagnose issues requiring service and provide effective troubleshooting., • Prepare detailed inspection reports that outline findings and recommendations for repairs., • Engage with clients, maintaining excellent customer service relationships., • Work in various environments such as commercial buildings, educational institutions, and healthcare facilities., • A minimum of 5 years of experience in the inspection or service of fire protection systems., • Strong knowledge of fire safety regulations and standards., • Excellent customer service and communication skills., • Ability to work independently and collaboratively in a team., • Valid Driver’s License., • Must pass background check and drug screening., • Required Certifications:, • Texas RME-I License, • Texas Backflow License, • Preferred Certifications:, • Texas FAL License, • Texas FEL-A License Benefits Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community “We care for our communities”, • Integrity “We act with integrity”, • Passion “We infuse passion into everything we do”, • Quality “We believe quality comes from a culture of innovation and continuous improvement”, • Inform Environmental Compliance Inspectors and/or other members of the Environmental Compliance Team of observations, violations, activities, etc., • Contact supervisor for priorities and deadlines in the field., • Resolve differences in the interpretation of plans and specifications., • Ensure the safe utilization, storage and maintenance of all documents and tools., • Update Direct Report on progress and delays on every task or assignment., • Ensure safe usage and maintenance of individually assigned company vehicle and field equipment., • Meet established project deadlines., • Carry out assigned duties in accordance with established procedures., • Prepare and submit accurate, legible, comprehensive and complete inspection reports on a daily basis in accordance with established quality procedures., • Review plans, specifications, and shop/working drawings for project activities., • Meet with contractor's supervisors or other project leaders on assigned project sites to discuss and coordinate environmental compliance activities, corrections to existing controls, and implementation of additional controls., • Prepare reports on findings to ensure compliance with applicable state and federal environmental laws, rules, regulations, and policies., • Evaluate environmental impact of construction activities including water quality/wetland/hazardous material geological, cultural or historic resources., • Keep abreast of current environmental developments to include laws, regulations, policies and procedures., • Responsible for maintenance and update of water quality records such as Storm Water Pollution Prevention Plans., • Monitor and evaluate the effectiveness of environmental controls., • High School Diploma or G.E.D. preferred but not required., • Environmental laws, regulations, and mitigation requirements., • Commercial construction, plans, construction inspection procedures, and specifications, • Reading and interpreting specifications. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. May be regularly required to stand, walk, and drive vehicle short and/or long distances. Occasionally required to climb or balance, stoop, kneel, crouch, or crawl. Frequently required to talk or hear. Occasionally required to lift and/or move up to, 50 pounds. Specific vision abilities required by this job include close vision, distant, color peripheral vision, depth vision, and ability to adjust focus. May be occasionally exposed to work near moving mechanical parts, fumes or airborne particles and frequently exposed to outdoor weather conditions. Noise level for this position is loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. Work responsibilities may require out of town travel to Raba Kistner offices, client offices and project locations. EOE/Disabled/Veteran Drug Free Workplace #LI-ONSITE

Job DescriptionSalary: We offer competitive pay, comprehensive benefits, company matched 401k, and opportunities to build a rewarding career with Apave America Inc. Position Overview: The API 510/570/653 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifyingcompliance with industry regulations. Conduct Inspections and Assessments • Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage., • Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping), or API 653 (storage tanks)., • Document findings from inspections, including any defects or non-conformities., • Provide detailed reports that include photographic evidence, measurements, and recommendations for corrective actions., • Identify potential risks and hazards based on inspection findings., • Recommend corrective actions, including repairs, replacements, or modifications to maintain safety and integrity., • Supervise NDT methods (such as ultrasonic testing, radiographic testing, magnetic particle testing, or dye penetrant testing) to detect subsurface or surface defects., • Ensure that inspections and assessments align with all relevant regulatory standards and safety protocols., • Assist with regulatory audits and maintain compliance with industry standards to minimize downtime and potential hazards., • Work with engineers, maintenance teams, and management to develop inspection schedules and action plans., • Provide technical advice and guidance on repair and maintenance strategies., • Track and monitor equipment performance over time and report any changes or declines in condition., • Maintain necessary API certifications and participate in ongoing training to stay updated with the latest inspection standards, tools, and technologies., • Ensure that inspections are carried out according to established quality assurance standards and practices., • Verify that the equipment meets the required operational and safety standards before returning to service. Required Skills and Experience: • High School Diploma or equivalent is required., • Minimum of two (2) years' experience working with the 510, 570, and/or 653 certifications required., • Minimum of API 510 and 570 certifications are required., • Additional API 653 certification will be considered an asset., • Certifications in NDT methods (MT/PT/UTT) would be considered an asset., • Valid Drivers License and pre-access drug and alcohol testing required., • Pre-employment background checks will be required. Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Benefits: • Dental Insurance., • Vision Insurance., • Health Insurance., • Paid Time Off., • 401(K) W/Matching., • Flexible Spending Account., • Health Savings Account. NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Professional Growth: Obtain additional certifications on the company's dime to advance toward Senior Building Inspector or Building Official roles. Strong knowledge of construction methods, building codes, and safety standards. Advance Your Career as a Building Inspector Make an Impact.

Supervises inspections of public infrastructures for various civil construction projects (i. Develops training programs to improve inspection staff knowledge of public infrastructure construction. Manages inspection staff to support and maximize their effectiveness for all assigned construction proj

Inspects, observes, documents, and verifies work in progress by the construction contractor to ensure compliance with project schedule, contract documents, and plans. High School Diploma/GED or equivalent and 6 years of construction related experience.

Observes, documents, and verifies work in progress by the construction contractor to ensure compliance with contract documents and plans. High School Diploma/GED or equivalent and 3 years of construction related experience.

We are seeking a Construction Supervisor/Inspector - I&E with strong background in Instrumentation installation projects during construction, cutover, and commissioning. Construction Supervisor/Inspector - I&E.

Job Description At Firetrol Protection Systems, we are dedicated to providing exceptional fire protection and life safety services. We are currently seeking a skilled Fire Sprinkler Inspector to join our team. In this role, you will be responsible for performing routine inspections, testing, and preventative maintenance of fire sprinkler systems, ensuring their proper functionality and adherence to safety standards. This position will be located in Pasadena, Tx. Key responsibilities: • Conduct routine inspections of fire sprinkler systems with minimal supervision, • Perform testing and maintenance tasks to ensure proper functionality, • Diagnose and troubleshoot issues that arise during inspections, • Document inspections and recommended corrective actions, • Previous experience as a Fire Sprinkler Inspector, • Valid driver's license, • Excellent communication skills for working with clients and team members, • Ability to work independently as well as in a team, • Knowledge of fire codes and safety regulations, • Physical ability to climb ladders, lift heavy objects, and perform inspections in various locations, • Previous experience as a Fire Sprinkler Inspector, • Valid driver's license, • Excellent communication skills, • Knowledge of fire codes and safety regulations Firetrol offers a full benefit package including health, vision, dental, life insurance, paid holidays, vacation, PTO, and a 401(k) with a generous match and immediate vesting. Visit for more information on Firetrol.

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: The below statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required. This description is subject to modification as the needs and requirements of the position change. • Conduct fire and life safety inspections of commercial and public buildings, both occupied and under construction, • Enforce local, state, and federal safety fire codes, laws, and regulations, • Deliver fire prevention education programs, • Investigate complaints related to fire codes, • Review building plans for fire code compliance, • Conduct fire and explosion investigations to determine cause and origin to include those occurring outside of regular business hours, • Prepare criminal complaints relating to intentionally set fires and fire code violations, • Testify in court as required, • Prepare monthly reports related to inspections, fire code violations, and others, • Perform other duties as assigned, • Subject to after-hours on-call response for investigations and other reasons as deemed necessary, • Only full-time employment with the City of Stafford is permitted. Additional Full-Time employment of any type is not allowed during the length of employment. KNOWLEDGE, SKILLS & ABILITIES: To perform in this position successfully, and individual(s) must be able to perform each essential duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. At time of application and duration of employment. • Applicable Federal, State, and local laws, codes, regulations, and/or ordinances., • Fire safety inspection methods and procedures;, • Investigative techniques related to fire safety;, • Evidence collection techniques related to fire safety;, • Specialized equipment relevant to the area of assignment., • • High school diploma or GED • Current TCOLE Peace Officer license – Basic, • Valid Texas driver's license, • Satisfactorily pass background investigation in accordance with CJIS requirements • • Current TCFP Fire Inspector – Basic* • Current TCFP Fire Investigator – Basic* • Frequent use of hands to handle, feel, or operate objects, tools, or controls, as well as reach with hands and arms, • Climb and balance, stoop, kneel, crawl, walk, sit, talk, and hear, • Work environment is frequently outside in varying weather conditions, consisting of low light, high heat, rain, dirt/dust, extreme cold, and other conditions, • Work environment may cause exposure to hazardous conditions and materials, with the use of Self-Contained Breathing Apparatus (SCBA) requiredHIRING PROCESS, • Panel interview of selected candidates.The City of Stafford is an Equal Opportunity Employer Job Posted by ApplicantPro