Trabajos inspector en Houston, Texas - Page 4Crear alertas

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: The below statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required. This description is subject to modification as the needs and requirements of the position change. • Conduct fire and life safety inspections of commercial and public buildings, both occupied and under construction, • Enforce local, state, and federal safety fire codes, laws, and regulations, • Deliver fire prevention education programs, • Investigate complaints related to fire codes, • Review building plans for fire code compliance, • Conduct fire and explosion investigations to determine cause and origin to include those occurring outside of regular business hours, • Prepare criminal complaints relating to intentionally set fires and fire code violations, • Testify in court as required, • Prepare monthly reports related to inspections, fire code violations, and others, • Perform other duties as assigned, • Subject to after-hours on-call response for investigations and other reasons as deemed necessary, • Only full-time employment with the City of Stafford is permitted. Additional Full-Time employment of any type is not allowed during the length of employment. KNOWLEDGE, SKILLS & ABILITIES: To perform in this position successfully, and individual(s) must be able to perform each essential duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. At time of application and duration of employment. • Applicable Federal, State, and local laws, codes, regulations, and/or ordinances., • Fire safety inspection methods and procedures;, • Investigative techniques related to fire safety;, • Evidence collection techniques related to fire safety;, • Specialized equipment relevant to the area of assignment., • • High school diploma or GED • Current TCOLE Peace Officer license – Basic, • Valid Texas driver's license, • Satisfactorily pass background investigation in accordance with CJIS requirements • • Current TCFP Fire Inspector – Basic* • Current TCFP Fire Investigator – Basic* • Frequent use of hands to handle, feel, or operate objects, tools, or controls, as well as reach with hands and arms, • Climb and balance, stoop, kneel, crawl, walk, sit, talk, and hear, • Work environment is frequently outside in varying weather conditions, consisting of low light, high heat, rain, dirt/dust, extreme cold, and other conditions, • Work environment may cause exposure to hazardous conditions and materials, with the use of Self-Contained Breathing Apparatus (SCBA) requiredHIRING PROCESS, • Panel interview of selected candidates.The City of Stafford is an Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Title: QA Inspector (Incoming Quality) Location: Houston, TX (Onsite – 5 days/week) Duration: 3-Month Contract (Likely Extension / Possible Conversion) Work Requirements: Must be authorized to work in the U.S. Compensation: 20-25/hr Summary We’re working with a growing medical device manufacturer looking to add a QA Inspector focused on incoming quality control. This role supports inspection of raw materials and precision components before they enter production. This is a detail-heavy, precision-focused role working with small components like PCBs and micro parts. It’s a strong opportunity for someone looking to get into or grow within a regulated, high-quality manufacturing environment. Responsibilities • Perform incoming inspections on raw materials and components prior to production, • Inspect mechanical and electronic components against drawings, specs, and acceptance criteria, • Use measurement tools such as calipers, micrometers, gauges, microscopes, and optical equipment, • Identify defects using visual and precision inspection methods, • Accept or reject materials based on quality standards, • Document inspection results accurately in logs and systems, • Identify and quarantine nonconforming materials, • Support corrective actions and quality investigations, • Maintain inspection records and controlled documentation Qualifications Required: • 1+ year of QA or inspection experience, • Hands-on experience with measurement tools (calipers, micrometers, gauges), • Ability to read drawings, specs, and inspection criteria, • Strong attention to detail and accuracy Preferred: • Experience in medical device or regulated manufacturing (ISO/FDA), • Experience with optical inspection tools (Keyence, Micro-Vu), • Metrology or precision measurement background, • Work Environment, • Quiet, focused inspection environment, • Small team (3–4 inspectors), • High-tenure group (people stay long-term), • Independent work with minimal supervision, • Flexible but structured workflow EEO Statement Summa is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description The Director of Radiographic Testing (RT) provides strategic and operational leadership for all RT programs across Tulsa Inspection Resources, LLC (TIR). This role is responsible for establishing technical standards, ensuring regulatory and client compliance, and driving performance, quality, and growth of RT services. The Director partners with executive leadership and cross-functional teams to develop workforce strategy, enhance technical capabilities, and ensure consistent, high-quality service delivery across all regions. This position serves as the company’s subject matter expert for RT and is accountable for program governance, inspector competency, and continuous improvement initiatives. PRINCIPAL DUTIES & RESPONSIBILITIES (additional duties may be assigned) • Provide strategic direction and oversight of all RT operations, including long-term planning, scalability, and performance across multiple regions, • Serve as the company’s subject matter expert for RT/NDE methods, ensuring compliance with applicable codes, standards, and client specifications, • Develop, implement, and maintain company-wide RT policies, procedures, and quality standards, • Partner with executive leadership, operations, and recruiting to forecast workforce needs and develop certification and training pipelines, • Oversee field performance, quality metrics, and compliance outcomes across all active projects, • Lead talent development initiatives, including training programs, certification pathways, and career progression for RT personnel, • Provide technical guidance on complex inspections, quality issues, and client escalations, • Ensure proper documentation, reporting, and recordkeeping for RT activities, certifications, OQ compliance, and audit results, • Collaborate with Quality, Safety, and Operations teams to drive continuous improvement and root cause analysis efforts, • Support business development efforts through client engagement, technical presentations, and proposal support, • Oversee RT equipment standards, technology adoption, and implementation of emerging inspection tools, • Monitor operational KPIs, budgets, and project performance; provide regular reporting and recommendations to executive leadership, • Maintain relationships with clients, regulatory agencies, and industry organizations to ensure alignment and credibility, • Lead internal and external audits, including compliance reviews and corrective action plans, • Promote and enforce a culture of safety, accountability, and technical excellence KNOWLEDGE, SKILLS & ABILITIES • High school diploma or equivalent required; Associate’s or Bachelor’s degree preferred, • 10+ years of experience in RT/NDE within pipeline integrity, mechanical integrity, construction, or related industries, • Proven leadership experience managing multi-site or multi-state operations, • Advanced knowledge of RT and related NDE methods (e.g., UT, MT, PT, PAUT), • Strong working knowledge of applicable industry codes and standards (e.g., API, ASME, ASNT), • Experience with Operator Qualification (OQ) programs, certification management, and audit processes, • Strong leadership, organizational, and decision-making skills, • Ability to manage multiple priorities and drive long-term strategic initiatives, • Excellent communication and interpersonal skills, including executive-level and client-facing interactions, • Proficiency in Microsoft Office and operational/reporting systems, • Demonstrated ability to maintain confidentiality and exercise sound judgment, • Strong commitment to safety, quality, and continuous improvement BENEFITS • Competitive Salary, • Medical, dental, vision, • Company Paid Long Term Disability, • Company Paid Life Insurance, • 401K Plan and Company Match, • Paid Holidays, • Paid Time Off, • Referral Bonus Program, • Internal Training and Cross Training for all NDT functions WORKING CONDITIONS Internal: Primarily office-based with regular collaboration across departments External: Periodic travel required for client meetings, field visits, audits, and industry engagement PHYSICAL DEMANDS • Ability to sit, stand, and walk for extended periods as needed, • Frequent use of computers and standard office equipment, • Occasional field visits requiring outdoor work in varying weather conditions, • Ability to work extended hours as needed to meet business demands COMPANY OVERVIEW Tulsa Inspection Resources has proudly served the industry for over 20 years as the premier inspection and integrity management service provider. We are committed to building strong relationships with our customers, field technicians, support staff, partners, and suppliers. Our focus goes beyond delivering exceptional services — we are dedicated to training and upskilling our team to ensure they remain industry leaders. By combining expertise with continuous development, we help our customers safely sustain economic production, manage asset integrity, reduce total cost of ownership, and protect the environment. Tulsa Inspection Resources, LLC (TIR) is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, age, religion, creed, national origin, gender identity, disability, military/veteran status, genetic information, or any other status protected by applicable law.

Job Description The Quality Supervisor is responsible for leading the daily activities of Quality Inspectors and NDT Inspectors at the RMS Houston facility. This position ensures that all inspection and testing activities are executed to RMS standards, customer requirements, and applicable industry codes. The Quality Supervisor provides direct oversight to inspection staff, supports the resolution of quality issues, and drives continuous improvement on the shop floor. The Quality Supervisor reports directly to the QHSE Manager and works closely with Operations, Engineering, and Project Management to ensure quality objectives are achieved. SKILLS REQUIRED ORGANIZATIONAL - Leadership & Organization: • Strong program ownership mindset with the ability to lead without direct authority, • Exceptional ability to prioritize, mulititask, and manage competing regulatory and operational demands, • High attention to detail with strong follow-through on corrective actions and commitments, • Demonstrated accountability for outcomes, not just activity, • Ability to adapt to changing operational schedules and priorities, • Ability to translate regulatory requirements into practical, shop ready programs, • Excellent verbal and written communication skills., • Ability to influence plant leadership and frontline employees, • Strong facilitation skills for training, meetings, and safety discussions, • Knowledge and experience with QMS principles and ISO 9001., • Working knowledge of relevant QHSE legislation., • Exceptional safety and quality awareness, • Relevant Quality professional qualification, • Supervise and coordinate the work of Quality Inspectors and NDT Inspectors, ensuring accuracy and consistency in all inspection activities., • Oversee inspection of rotating equipment components (compressors, turbines, and related assemblies) for dimensional, metallurgical, and nondestructive testing compliance., • Review and approve nonconformance reports, ensuring proper documentation, disposition, and timely closure., • Coach and develop inspection staff through structured training and mentoring programs to elevate technical proficiency, strengthen ownership, and prepare them for higher levels of responsibility within the Quality organization., • Support and verify root cause analysis and corrective/preventive actions., • Oversee inspection equipment calibration and NDT inspector certification records., • Coordinate with Operations and Engineering to address quality issues affecting production and service., • Support customer and third-party audits, providing inspection documentation and records as required., • Monitor and report inspection performance, defect trends, and key metrics to the Quality Manager., • Promote compliance with RMS’s QMS (ISO 9001) and applicable codes (API, ASME, AWS). The above list of activities is not all inclusive but a general representation of the requirements of an RMS Quality Supervisor. This list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • 10+ years of experience in quality assurance/ inspection in a manufacturing or service environment, • Strong rotating equipment knowledge, including inspection, assembly, and repair of turbomachinery., • 2+ years of supervisory or team leadership experience., • Proficient with dimensional inspection tools and methods., • Working knowledge of NDT methods (MT, PT, UT, RT preferred)., • Knowledge of welding processes, weld inspection, and applicable codes (ASME, AWS) appreciated., • Familiarity with machining practices and processes., • High School Diploma or GED from an accredited institution, • The position may be based in RMS’s Houston, TX facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background checks., • Must possess a valid driver’s license, • Ability to pass pre-employment drug, alcohol test, and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Ability and willingness to lift objects weighing up to 50 lbs. (with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembling and tool usage, • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel., • Authorized to work in the United States, • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionSalary: Note: Accepting resumes. The Environmental Inspector is under the general supervision of the Chief Inspector/Assistant Chief/ Client representative. The Environmental Inspector shall possess knowledge and be well skilled and competent in the regulations associated with field construction. The responsibilities include but are not limited to the following: Primary Functions: • Has a full working knowledge of the Erosion and Sediment Control Plan, this includes the plan narrative and plan drawings., • Ensures that all erosion and sedimentation control measures at waterways, roads, excavations, hillsides, etc., are installed in their proper sequence and in accordance to the design specifications., • Keeps the Chief Inspector aware of any problems or of any anticipated problems which may affect compliance with the Environmental Plan or Governmental Regulations., • Maintains close contact with all other inspectors on the project to address any questions or concerns that may arise., • Assures that no design changes or material substitutions affecting the Environmental Plan are made unless prior approval is obtained from the Chief Inspector., • Assures that all environmental structures damaged by the contractor are repaired and restored per the Environmental Plan., • Assures that all materials used in the performance of the job assignment are in compliance with the Environmental Plan. Qualifications: • Proven capabilities and experience in the execution of installing environmental controls., • Is knowledgeable in Industry Standards relating to erosion and sediment control practices., • Is thoroughly versed with the Client Company procedures of the Environmental Plan. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visitAPI | API 1169 - Pipeline Construction Inspector for more information. For more information about EnSiteUSA, please visit:

Job Description At Firetrol Protection Systems, we are dedicated to providing exceptional fire protection and life safety services. We are currently seeking a skilled Fire Sprinkler Inspector to join our team. In this role, you will be responsible for performing routine inspections, testing, and preventative maintenance of fire sprinkler systems, ensuring their proper functionality and adherence to safety standards. This position will be located in Pasadena, Tx. Key responsibilities: • Conduct routine inspections of fire sprinkler systems with minimal supervision, • Perform testing and maintenance tasks to ensure proper functionality, • Diagnose and troubleshoot issues that arise during inspections, • Document inspections and recommended corrective actions, • Previous experience as a Fire Sprinkler Inspector, • Valid driver's license, • Excellent communication skills for working with clients and team members, • Ability to work independently as well as in a team, • Knowledge of fire codes and safety regulations, • Physical ability to climb ladders, lift heavy objects, and perform inspections in various locations, • Previous experience as a Fire Sprinkler Inspector, • Valid driver's license, • Excellent communication skills, • Knowledge of fire codes and safety regulations Firetrol offers a full benefit package including health, vision, dental, life insurance, paid holidays, vacation, PTO, and a 401(k) with a generous match and immediate vesting. Visit for more information on Firetrol.

Job Description Position Summary Thompson Engineering is seeking a motivated and detail-oriented Certified Welding Inspector (CWI) to join our inspection and quality assurance team. This position is responsible for performing welding inspections and ensuring compliance with applicable codes, project specifications, and industry standards across a variety of construction and industrial projects throughout the Southeast. This role requires the ability and willingness to travel to project sites, including multi-state assignments, and work in field environments as needed to support active construction operations. Key Responsibilities • Confirm welder qualifications and maintain required documentation, • Interpret construction drawings, welding symbols, and technical specifications, • Document inspection findings, non-conformances, and corrective actions, • Coordinate and monitor non-destructive testing (NDT) activities as required, • Prepare daily field reports, inspection summaries, and supporting documentation, • Travel to various job sites, including out-of-town and multi-state assignments, as required, • Follow established safety policies and quality control procedures, • Communicate effectively with project managers, field staff, contractors, and clients Qualifications • Current Certified Welding Inspector (CWI) certification issued by the American Welding Society (AWS), • Minimum 3 years of welding inspection experience preferred, • Working knowledge of applicable welding codes such as AWS D1.1, API 1104, and ASME Section IX, • Strong understanding of welding processes and inspection techniques, • Proficiency with Microsoft Office applications and digital reporting systems, • Strong written and verbal communication skills, • Valid driver's license with a clean driving record, • Ability and willingness to travel frequently and work extended hours based on project needs Physical and Work Environment Requirements • Ability to work in outdoor and construction site environments, • Ability to stand for extended periods and navigate uneven terrain, • Ability to lift up to 50 pounds and perform field-related tasks, • Willingness to work flexible hours, including overtime and travel assignments, based on project needs

Job Description About the Role: The New Vehicle Inspection role is critical in ensuring that newly manufactured or delivered vehicles meet all safety, quality, and regulatory standards before they reach customers. This position involves conducting thorough inspections of vehicles to identify any defects, damages, or deviations from manufacturer specifications. The inspector plays a key role in maintaining the brand’s reputation by preventing substandard vehicles from entering the market. This role requires a keen eye for detail, strong technical knowledge of vehicle systems, and the ability to document findings accurately. Ultimately, the goal is to guarantee that every vehicle leaving the facility is safe, reliable, and compliant with all applicable standards. Minimum Qualifications: • High school diploma or equivalent., • Experience in vehicle inspection, automotive maintenance, or a related field., • Certification in automotive inspection or quality control., • Experience working with new vehicle delivery or manufacturing environments., • Proficiency with digital inspection tools and software., • Perform comprehensive inspections of new vehicles, including mechanical, electrical, and cosmetic components, to ensure compliance with quality standards., • Identify and document any defects, damages, or inconsistencies found during the inspection process., • Collaborate with manufacturing and quality assurance teams to communicate inspection results and facilitate corrective actions., • Maintain detailed records of inspections and generate reports to support quality control and regulatory compliance. The required skills enable the inspector to accurately assess vehicle condition by applying technical knowledge and attention to detail during each inspection. Proficiency in reading technical manuals and checklists ensures that inspections are thorough and consistent with manufacturer and regulatory standards. Preferred skills such as certification and familiarity with digital tools enhance the efficiency and accuracy of inspections, allowing for better documentation and reporting. Communication skills are essential for effectively conveying inspection findings and collaborating with manufacturing and quality teams to resolve issues. Together, these skills ensure that the inspector can maintain high-quality standards and contribute to the overall safety and reliability of new vehicles.

Job Description The QC Fabrication In-process Inspector position reports directly to the QC Fabrication Inspection Supervisor and performs the following in-process inspections in the fabrication department. Laser Cut and Formed Metal In-process Inspection Responsibilities • Verifies cut components are free of burrs and sharp edges, • Verifies bent components are bent in the proper orientation by comparing the component to the engineered drawings., • Verifies all copper hole punching is free from burrs or damaged to copper components., • Verifies epoxy insulation is free from knicks, burns, cuts or visible damage, • Verifies proper fit-up/alignment of laser cut/formed components prior to welding, • Verifies welds on components prior to completed assembly welds, • Verifies paint finish does not contain any peeling, bubbling or discoloration using paint color chip(s), • Be responsible for utilizing squares and mil thickness gauges to validate component compliance., • Form fills paperwork to validate inspections completed, • High school diploma or GED required, • 1–3 years of manufacturing, fabrication, QC, or inspection experience required, • Ability to read engineered drawings and verify part compliance, • Ability to use inspection tools such as squares, rulers, and mil thickness gauges, • Ability to identify fabrication, welding, insulation, and coating defects, • Strong documentation skills, including inspection forms and NCRs, • 3+ years of in-process inspection experience in a fabrication environment, • Experience with sheet metal, copper forming, welding, epoxy insulation, or powder coating inspection, • Experience with NCR documentation and quality systems, • Familiarity with additional measurement tools such as calipers and micrometers, • Experience in switchgear, electrical manufacturing, or custom industrial fabrication, • Bilingual English/Spanish preferred

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled CNC Fabricator. The CNC Fabricator produces a variety of sheet metal parts, which meet dimensional requirements. Set up and align parts per shop prints in preparation for CNC operations, and final fabrication assembly. Working either individually, or as part of a small team to produce metal buildings and enclosures. Job Duties: • Consults blueprints, work orders, and/or schematics to safely construct a specified structure; develop additional sketches if needed., • Selects appropriate material for each job based on the desired or necessary strength., • Load and unload raw materials and equipment, set up and calibrate accessories, and program the CNC machine, • Cuts, bends, and shapes sheet metal to required dimensions., • Measures and cuts according to specifications, blueprints, or directions., • Verifies conformance of workpiece to specifications, using square, ruler, and measuring tape., • Perform assigned work such as punching holes for screws or bending., • Sets up and operates fabricating machines, such as brakes, and shears., • Coordinates require shutdowns and startups of equipment., • Develops and maintains records for projects and repairs, • Maintains clean and orderly workspace, • Performs other related duties as assigned, • Notify the lead person or Inspector when the product is ready for inspection, • Maintains a clean and safe work area each day and returns tools to their proper locations, • High school diploma or equivalent preferred, • Forklift certification preferred, • Two plus years of CNC experience required, • Two plus years of experience in forklift operating required, • Two plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, etc.) required, • Two plus years of experience in shear, brake press, turret punch, band saw, grinder, ratchet straps, and other hand tools required, • Two plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • High levels of organizational and time management skills required, • High levels of analytical, observational, and active listening skills required, • High levels of reliability required, • Excellent communication skills, both written and verbal required, • Ability to pass physical, drug, driving, and background check required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Ability to read a tape measure and prints required, • Ability to convert decimals to fractions and utilize conversion charts required, • Excellent manual dexterity required, • Alignment with company core values required, • Ability to read tape measure down to 1/32”, • Ability to read decimals/fractions on measurements Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionCentiMark Corporation, the nation’s leader in commercial and industrial roofing, has an immediate full-time opening for an entry-level, Branch Safety Inspector to cover our Houston or San Antonio offices. This role is paying $20/hr to $25/hr with overtime available. Job Summary: • Must have good working knowledge of roofing procedures and safety, • Knowledge and understanding of OSHA Regulations, • Valid state driver’s license in good standing required, • Excellent communication/ writing skills, • Superb follow up skills, • 5 years roofing/ construction experience preferred, • Bilingual (English/Spanish) preferred, not requiredCandidate Requirements, • Overnight travel, • Assist in setting up fall protection, pre-job inspections and job planning meetings, • Sign off on all deck replacement fall protection plans, • Perform safety inspections on all crews (including Service) to check compliance, • Check Fall Plans, Tool Box Talks and other safety documents to be on site, • Address all safety violations in compliance with CentiMark Safety Rules or Policy, • Review inspections with crews and cover safety awareness messages, • Report inspection results on a weekly basis to the Regional Manager, • Serious violations must be reported immediately, • 2 Health Insurance Plans:, • No Cost “Core Plan” – No Cost Medical & Dental, • “Buy Up Plan” – Features a lower deductible for Medical, • Vision Plan, • Employer Paid Life & AD&D Insurance, • Traditional 401K with Company Match, • Roth 401K with Company Match, • Employer Provided Employee Stock Ownership Program (ESOP), • Flexible Spending Account (FSA), • Paid Holidays and Vacation WHY WORK FOR CENTIMARK? >>>> CLICK HERE TO WATCH VIDEO! CentiMark provides a great work environment with challenging career opportunities. Drug Free Workplace - EOE (M/F/V/D) - E-Verify Employer For more information, please visit our website -- Powered by JazzHR o1YT6AdYKH

Consults with Project Engineers, resident project representatives and contractor's superintendents on work progress and construction problems; reviews equipment utilization data and time/cost estimates. Observe, measure, and document construction activities. Construction Inspector I to join the team

We are seeking a qualified and detail-oriented Construction and Building Inspector to perform technical inspections of buildings, infrastructure, and fabrication projects to ensure compliance with applicable codes, standards, and project specifications. Inspect construction, fabrication, and install

VSC Fire & Security delivers integrated, cutting-edge fire protection, life safety and security solutions, including fire suppression and detection systems, fire sprinklers, alarms and security systems. VSC Fire and Security is a drug free workplace. As the premier provider of fire protection and li

Job Description Essential Responsibilities · Accurate dimensions inspection of product using a wide variety of measuring devices · Handle vendor incoming inspection · Manages the NDT reports server · Assure all First and Last Article inspection is conducted as required · Manages and analyzes all customer returns · Identifies non-conformances and generate QC reports · Lead further activities when a non-conformance product/material is identified · Educate/train other employees on specification requirements · Complies with company safety regulations and standard procedures at all times Qualifications · Minimum high school diploma or equivalent · Quality Control: Minimum 5 years of experience · Experience in the PVF (pipe, valves and fittings) industry · Speak and read English. Bilingual Spanish preferred · Working knowledge of blueprint reading, shop math and non-destructive testing · Proficient in Microsoft Word, Excel and Outlook · Ability to understand and execute instructions well · Positive attitude; works well under stress · Hands-on, action oriented, and demonstrate a bias for continual improvement · Ability to organize, prioritize, and accomplish multiple tasks with careful attention to detail · Capable of lifting 50 lbs with back support · Ability to drive forklift and secure certification · Positive attitude; works well under stress · Hands-on, action oriented, and demonstrate a bias for continual improvement · Ability to organize, prioritize, and accomplish multiple tasks with careful attention to detail Company DescriptionWe offer an excellent compensation and benefits package that includes medical, dental, vision, life, 401(k), disability, and paid time off. Allied Group's people deliver expertise born of experience. We understand the needs of our customers because we know what matters to them most. Our capabilities include on-staff metallurgists, several quality-control specialists, and skilled customized finishing professionals. Opportunity for Growth! Must be able to pass physical, background and drug test.We offer an excellent compensation and benefits package that includes medical, dental, vision, life, 401(k), disability, and paid time off. Allied Group's people deliver expertise born of experience. We understand the needs of our customers because we know what matters to them most. Our capabilities include on-staff metallurgists, several quality-control specialists, and skilled customized finishing professionals. Opportunity for Growth!\r\n\r\nMust be able to pass physical, background and drug test.

Job DescriptionQuality Control Inspector | $16-$19 an hour | Monday through Friday 7:00am to 5:00pm What Matters Most • Competitive Pay rate $16-$19 an hour, • Schedule: Monday through Friday 7:00am to 5:00pm, • Location: South Houston, TX | 77051, • Temporary-to-hire opportunity with career growth and stability, • Weekly Pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus programJob DescriptionWe are currently seeking a motivated Quality Control Inspector to join our dynamic team. In this role, you will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency. If you are looking for a hands-on position where you can contribute to the efficiency of our operations and grow within a supportive work environment, we encourage you to apply. Responsibilities:, • Daily use and care of measuring equipment consisting of calipers, micrometers, tap measure, height gage and NPT threaded gages, • Daily inspection on inbound and outbound material, • Perform thorough examinations of all materials and finished products, • Implement and improve quality control operating procedures, • Participate in routine visual inspections Qualifications and Requirements:, • Ability to work flexible hours, including weekends (50+ hours/week)., • Pass background check and drug screen., • Commitment to safety and adherence to protocols., • At least 6 months experience inspecting pipe, • Experience with fittings flanges pipe preferred, • Must be able to do simple math, • Capable of working in extreme weather and performing physical tasks. Benefits and Perks:, • Competitive Salary: $16-$18 an hour - Enjoy a competitive wage that reflects your skills and experience with potential for performance-based bonuses, • Comprehensive health, dental, and vision insurance., • Generous paid time off (PTO) and paid holidays., • 401(k) retirement plan with company match., • Opportunities for career advancement and professional development., • Supportive and inclusive work environment., • Employee wellness programs and resources., • Discounts on company products and services. Your New Organization:Join a dynamic and growing leader in the pipe supply industry where your skills and contributions are highly valued. Company offers a competitive salary, comprehensive benefits, and ample opportunities for career advancement in a supportive work environment. Their commitment to employee development and a positive workplace culture makes this a great place to build your career. Discover your future with a company dedicated to excellence and growth.Your Career Partner:The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment.The base hourly range for this position is $16 - $19 an hour, excluding benefits, bonuses, or other compensation. Your final salary will depend on your skills, qualifications, experience, location, and internal pay equity. Please note, hiring at the top of the range is uncommon to allow room for future salary growth.

Convergentz, a division of the Hunton Group, () has a new and exciting opportunity for you to join our organization as a Fire Life Safety Inspector. Installation and service of all fire and life safety equipment systems, including new installations, retrofits, and tenant improvem

The Rope Access, NACE Level 3 Inspector (NACE Level 3 Inspector with Rope Access Level 1, 2, or 3 certification) is responsible for leading, managing, and performing coating inspections, maintenance, and repairs of offshore structures using specialized rope access techniques and equipment, ensuring

Requires the ability to perform on-site field inspections requiring a moderate amount of physical exertion to stoop, crouch, climb and lift; ability to work around electrical currents and building materials in a safe manner; sufficient hand-eye coordination to perform semi-skilled repetitive movemen

The Aircrew Program Manager (APM) is responsible for the adequacy of aircrew ground and flight training/testing and standards for specific aircraft of an assigned air carrier.Work is performed under the general supervision of the Principal Operations Inspector (POI).Manages programs on assigned airc

Job Description Convergentz, a division of the Hunton Group, has a new and exciting opportunity for you to join our organization as a Fire Life Safety Inspector. In this role, the selected candidate will conduct inspection services on either of, or a combination of the following fire protection systems and equipment, which may include Fire Alarm Systems, Fire Sprinkler Systems, Fire Pumps, Backflows, Fire Extinguishers, Kitchen Hood Fire Suppression Systems, Total Flood Fire Suppression Systems, and more. The ideal candidate will provide mentorship and guidance to junior technicians, ensuring all work is performed safely and efficiently. Come work for an industry leader that has been recognized both locally and nationally as one of the Top Places to Work! Responsibilities: • Annual, Quarterly, and 5-year inspections and testing of fire protection systems, including but not limited to:, • Installation and service of all fire and life safety equipment systems, including new installations, retrofits, and tenant improvement projects., • Provide support, guidance, and expertise to other field installers and helpers., • Clear and concise communication with team members and customers about their systems and deficiencies, • Thoroughly and accurately complete inspection reports, ensuring attention to detail and including clear, concise documentation with supporting photographs., • Time management, • Minimum of three (3) years of experience in inspection and installation of fire systems., • Proficient knowledge of wet, dry, and pre-action fire sprinkler systems., • Familiarity with Antifreeze systems, backflow prevention, and fire pump systems are a plus., • Experience with the installation of underground piping is advantageous., • In-depth understanding of NFPA 13 and 20 code requirements., • Ability to read and interpret fire system design drawings., • Solid knowledge of the fire protection industry., • Understanding of OSHA safety standards. Job Posted by ApplicantPro

Job DescriptionGENERAL DESCRIPTION: • Performs all repair process inspections to ensure compliance with requirements, • Performs incoming inspection of all raw materials/components/castings received prior to release to the facility, • Practice and ensure good shop safety practices, • Monitor and respect tool and equipment calibration, • Input production data into ERP system, • Performs Non-Destructive testing, including ultrasonic, dye penetrant, visual and mag particle, • Perform other duties as assigned. QUALIFICATIONS: • High school diploma or GED, • 2-4 years of NDT Quality Inspection experience working in the combustion turbine repair industry, • 2 year technical school with Certification in SNT-TC-1 A ADA JOB REQUIREMENTS: Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

MacDonald-Bedford LLC is seeking a Certified Elevator / Transport System Inspector to conduct facility assessments of existing systems, with a focus on condition, maintenance, cost, schedule, and performance. As part of a Facility Condition assessment Team, conduct comprehensive on-site inspections,

Inspectors are responsible for inspecting, testing, and maintaining fire sprinkler systems, fire pumps, and backflows with minimal supervision. Are you interested in working for the nation's leading fire protection company and beginning a rewarding and satisfying career that helps save the lives of

As a global medtech company, we are driven by our Vision of changing the trajectory of lives for a new day and our Mission to create ingenious solutions that ignite patient turnarounds.Our relentless commitment to patients and strong legacy of innovation in healthcare are the foundation of our futur

Wood Pipeline Inspection Team has an opportunity for a Chief Inspector (Sr. Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets.

ICC Certified Building Official (CBO) required; additional ICC certifications (Plans Examiner, Building Inspector) highly desirable. Full-timeLead, Influence, and Shape Building Safety as a Building Official. Supervise building inspectors and manage inspection programs.

We are seeking a qualified and detail-oriented Construction and Building Inspector to perform technical inspections of buildings, infrastructure, and fabrication projects to ensure compliance with applicable codes, standards, and project specifications. Inspect construction, fabrication, and install

The API Inspector is responsible for leading inspection of piping and fixed equipment, in addition to providing functional expertise related to Integrity Management (IM) within the assigned project(s).Emphasis is placed on quality of the work product and the efficiency of work execution.The API Insp

Wood Pipeline Inspection Team has an opportunity for a Chief Inspector (Sr. Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets.

Conducts a range of trade-specific inspections on elevators, escalators, mechanized walkways, and/or other lift machinery, verifying that the operation, construction, retrofit, or repair work in the field is performed in accordance with applicable code requirements, drawings, plans, specifications a

Monitor quality standards for incoming material and manufactured products.Perform inspections of adjustable speed drives and power apparatus throughout the various stages of the manufacturing process.Perform inspections of incoming material.Assist with projects as assigned by department leadership.F

Serve as an Inspector Trainee by learning Saybolt, API, ASTM, and customer guidelines and procedures. The Trainee will also learn and adhere to all company safety policies and procedures.

Serve as an Inspector Trainee by learning Saybolt, API, ASTM, and customer guidelines and procedures. The Trainee will also learn and adhere to all company safety policies and procedures.

Quality Control Inspector (6+ Month Contract). The Temporary Quality Control Inspector will support the Safe Fleet Quality team for a six-month contract period under the direction of the Quality Control Coordinator.

As a global medtech company, we are driven by our Vision of changing the trajectory of lives for a new day and our Mission to create ingenious solutions that ignite patient turnarounds.Our relentless commitment to patients and strong legacy of innovation in healthcare are the foundation of our futur

Job Description Job Description: Houston area restoration contractor Cavalry Construction has an immediate opening for a full-time Plumbing Program Inspector. We are looking for a highly motivated and ambitious professional with strong sales ability, excellent communication skills, and the capacity to manage plumbing related mitigation projects from start to finish. The ideal candidate will present professionally, respond quickly to new plumbing leads, and confidently guide homeowners through both self-pay projects and insurance-covered losses. Duties and Responsibilities: • Manage all aspects of the inspection up to signed Work Authorization., • Documentation of all communication and job progress in dedicated job management software, • Perform in-person inspections of damage and secure job with client in the field, • Weekly Strategy meetings with Marketing Rep, Operations Manager, File Coordinator and GM to review prior weeks Secured and Non-Secured jobs, • Keep all stakeholders informed of job status daily from initial visit through a signed Work Authorization (this includes homeowner, tenant, property manager, referring party, ect.), • Organize all job information and documentation in appropriate CRM utilizing pictures, notes, and tasking features. This includes scoping, sketching, and documentation. These tools include moisture meters, thermal cameras, and CRM., • Provide File Coordinator and Operations Manager with proper scope outline and be available to answer questions while the job is in production., • Process appropriate regulatory sampling per guidelines (Asbestos, lead, ect), • Excellent communication skills and a high level of comfort speaking to customers, • Ability to overcome challenges and obstacles through problem solving, • Experience in Microsoft programs such as Word and Excel as well as CRM proficiency, • Strong time-management and people skills, • Professional appearance and demeanor, • Strong attention to detail and work ethic, • Experience in sales environments, • IICRC WRT and either AMRT or ASD Certifications preferred but not required, • 1 year minimum in current position if promoting from within (must be in good standing on last performance review; a 4 or better with no performance improvement plan in place) Please send resume and salary requirements by email as a .pdf. No phone calls please. Post-offer drug screen and background check are required. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • Monday to Friday, • Weekends as needed Supplemental Pay: • Commission Pay

Job Description HEALTHCARE FACILITY SURVEYOR Essential HealthCare Solutions is seeking a goal-oriented problem solver and team player who is ready for the responsibility required to work in a professionally exciting environment, ensuring the safety of patients and residents of healthcare facilities nationwide while sharing their knowledge and expertise to support the company's mission of providing superior customer service. You will enjoy a creative work environment and comprehensive fringe benefits that include: • Flexible paid vacation days, • Paid holidays, • Company-issued and company-paid Amex card for travel, • All travel expenses paid directly by the company, • Airline and hotel points accumulate for the employee's personal use, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Disability insurance, • Extensive training opportunities This position is 100% remote with up to 75% travel. The HealthCare Facility Surveyor will perform various types of surveys (i.e., re-certification, comparative, complaint investigation, and revisits) for long-term care and non-long-term care facilities, including: • Long Term Nursing HealthCare Centers, • Ambulatory surgical centers (ASC),, • Intermediate Care Facilities for Individuals with Intellectual Disabilities (ICFs/IID), • End-stage renal disease (ESRD), • Psychiatric Residential Treatment Facility (PRTF), • hospital, critical access hospital, and hospice facilities, • Conducting on-site surveys of Medicare-Medicaid certified healthcare facilities to determine compliance with federal regulations., • Preparing for surveys, including off-site preparation, facility tours, observations, record reviews, and staff interviews., • Evaluating the safety systems and physical plant of healthcare facilities., • Communicating non-compliance issues with key personnel throughout the site review and exit conference., • Determining the acceptability of plans of correction., • Conducting follow-up visits and monitoring surveys to verify the implementation of corrective actions., • Minimum of 3 years' experience in Life Safety Code inspections and fire safety in accrediting or certifying facilities serving long-term care residents., • Successful completion of CMS's Basic Life Safety Code Training., • Fire Inspector 1 (NFPA) certification preferred but not required., • Demonstrated knowledge, skills, and abilities to conduct federal surveys, investigate complaints, and respond to crisis situations in compliance with federal laws, regulations, and guidelines., • Strong independent decision-making skills to effectively manage the survey process, set priorities, discuss conflicts, and seek assistance when needed., • Ability to work independently or as part of a team., • Current knowledge of fire protection and life safety standards of practice. Salary: $80,000 to $92,000 per year Essential HealthCare Solutions is an Equal Opportunity Employer: We are an Equal Employment/Affirmative Action employer. We do not discriminate in hiring based on sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. If you need reasonable accommodation for any part of the employment process, please contact Human Resources and let us know the nature of your request and your contact information. Accommodation requests will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to by Human Resources.

Home inspectors conduct inspections on residential properties to check for compliance and assess if there are hazards or structural defects. This entails examining both the interior and exterior of the property, including infrastructure, electrical and plumbing systems, and water quality. In respons

Corrosion Control Lead with Established Presence in Houston, TX This Jobot Job is hosted by: Cheyanne Muller Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $145,000 per year A bit about us: A well-established downstream energy company with a strong presence in the U.S. refining sector. The organization operates multiple large-scale refineries across key domestic markets and maintains an extensive network of terminals, pipelines, and specialty manufacturing facilities. With a workforce of several thousand employees and significant aggregate crude processing capacity, the company is recognized as a stable, well-branded supplier within the petroleum industry. Why join us? Flexible work arrangements, including remote or hybrid setups for qualifying roles, based on business needs Alternative work schedules available in select departments, including a 9/80 option Generous time-off offerings, including paid vacation, company-recognized holidays, and caregiver leave Additional paid vacation incentives awarded annually to eligible employees Robust retirement programs featuring a competitive 401(k) match and a traditional pension plan Incentive opportunities tied to individual and company performance Broad health coverage options, including medical, dental, and vision plans with FSA and HSA participation Employer-provided coverage for sick leave, long-term disability, and life insurance Programs that support employee wellness, including health rewards initiatives and fitness reimbursements Ongoing professional development through tuition assistance, recognition programs, and scholarships for eligible dependents Access to employee savings and discount programs Convenient on-site resources at select locations, such as health services, dining options, fitness facilities, and financial services Job Details This role provides technical leadership for corrosion prevention and cathodic protection activities across terminal and pipeline assets. The position ensures programs align with internal standards and applicable regulatory requirements while supporting integrity, risk mitigation, and long-term asset reliability. The role also includes oversight of field personnel, external service providers, and corrosion data systems, and serves as a subject matter authority for coatings and corrosion control practices. Key Qualifications: • Bachelor’s degree with 8+ years of relevant experience, or 12+ years of progressive experience in corrosion control, • Active NACE Cathodic Protection Technologist (CP3) certification (required), • Strong working knowledge of corrosion control principles, CP system design, testing, installation, and operational monitoring, • Proficiency with standard business software (word processing, spreadsheets, presentations); experience with corrosion data management systems preferred, • Bachelor’s degree in engineering or a physical science discipline, • Oversee cathodic protection survey activities for terminal facilities, including contractor selection, cost development, and performance evaluation, • Review, interpret, and validate CP survey data; identify deficiencies and recommend corrective actions to operations leadership, • Develop repair scopes, coordinate internal and external resources, and provide technical oversight for CP and corrosion remediation projects, • Provide technical direction and day-to-day guidance to corrosion technicians supporting pipeline assets across multiple regions, • Support integrity management initiatives by analyzing corrosion growth rates, close-interval survey results, in-line inspection data, field excavations, and coating performance, • Deliver corrosion control support for above-ground storage tank inspections to ensure regulatory compliance and asset protection, • Maintain and enhance corrosion data systems, including rectifier monitoring, route configuration, test point management, and ad-hoc reporting, • Administer corrosion documentation, procedures, and records, including updates to operating and maintenance manuals and as-built files, • Lead the coatings governance group, serving as the technical authority for coating specifications, approved materials, inspection programs, and performance reviews, • Coordinate coatings inspections, maintain inspector qualifications, and facilitate periodic technical review meetings Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionDescription: The Express Technician services vehicles as assigned by management following all established standards and procedures, which includes rotating tires, performing multi-point inspections, and changing automotive fluids. He or she checks the oil, tire pressure and condition, filters, windshield wiper fluid, power steering fluid, brake fluid, transmission and differential fluids, and engine coolant. The ideal candidate has a high school diploma or GED, at least one year of experience, an unrestricted driver's license and a clean driving record, an aptitude for vehicle maintenance. State-certified inspectors a plus. Candidates must have fluent English speaking and writing skills, good time management skills, and appropriate appearance and behavior. Responsibilities • Checks all fluids and maintenance-related parts and tops-off or replaces fluids or filters/parts as required, • Performs routine service inspections or tests and completes standard maintenance jobs, • Maintains cleanliness of vehicles while performing service or repairs, • Ensures that required documentation is complete and is in compliance with regulations and standards, • Performs other duties as assigned Requirements: Qualifications • High school diploma or GED preferred, • One year of relevant experience preferred, • Knowledge of automotive servicing or repair highly desired, • Unrestricted driver's license and clean driving record, • Can drive both automatic and standard-transmission vehicles, • Neat, clean, and professional appearance, • Excellent interpersonal skills to interact professionally with customers, vendors, and staff, • Basic computer and internet skills, • Certification as a state inspector a plus Keating Auto Group is always looking for talented, self-motivated individuals to join our team. If you think you are ready to be a part of an exciting team, then we encourage you to continue with this applicant friendly, online job application! Keating Auto Group is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, age, national origin, ancestry, citizenship, disability, or veteran status. Benefits • Group benefits package (Medical, Dental, Life Insurance), • 401(K) with Company Match, • Paid Vacation, • Direct Deposit, • Employee Assistance Program, • Excellent Advancement Opportunities, • Free Parking

Property Inspector Post Judgment. Organize inspections for daily property inspections. Contact property owners on occupied properties to ensure they are informed of the pending tax sale.

Job DescriptionJob Title: Quality Inspector / Non –Destructive Testing Tech Level II We are currently searching for an experienced and highly analytical Quality Inspector to join our department. As the Quality Inspector, you will uphold the safety regulations of our company and supervise the production/ Fabrication process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations; record inspection results, and recommend improvements to the production/Fabrication process. To excel in this role, applicants should demonstrate great attention to detail with good technical and organizational skills. Essential job functions: • Perform regular quality assessments on incoming materials from vendors when required., • Approves finished products by verifying it conforms to the specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work., • Reject all products and materials that fail to meet quality expectations., • Read blueprints, plans, and specifications to understand the requirements of products and services., • Measure product dimensions, examine functionality, and compare the final product to the specifications., • Recommend improvements to the production process to ensure quality control., • Document inspection outcomes by completing detailed reports and performance records., • Resolve quality-related issues promptly., • Maintain a safe and healthy work environment by following company standards and procedures, and complying with legal requirements., • Recording inspection data on the appropriate ACSI Inspection forms/documents, including documentation of the Non-conforming process, product, and services (should it be needed). Secondary job functions: • Replace or assist other workers as deemed necessary., • Perform other tasks as assigned by a supervisor or manager. Knowledge, skills, and abilities: • One to two years' quality inspection experience, • Visual weld inspection, • Dye Penetrant Level II Certification, • Magnetic Particle Level II Certification, • Ultrasonic Level II Certification, • High School Diploma/GED or Higher, • English Communication Skills- Written, Verbal, Interpersonal, and Phone, • Ability to think analytically, with a focus on quality and detail, • A flexible and strong team player who can work in a fast-paced environment, • Must be computer literate (Word, Excel), • Read & Understand: tape measure, calipers, Engineering Drawings, weld symbols, and general shop testing equipment Job Posted by ApplicantPro

Job Description For over 40 years, ONEMESA has been providing solutions for corrosion control and rust mitigation across all sectors. Headquartered in Tulsa, Oklahoma, ONEMESA encompasses multiple companies—MESA Products, MESA Services, Bass Engineering, and Hansen Drilling—each delivering specialized expertise and innovative solutions to meet our customers’ diverse needs. With regional offices across the country and an in-house team of project managers and engineers, ONEMESA is one of the top three providers of corrosion control solutions in the United States. Our commitment to delivering SAFE, innovative solutions for the protection of people, property, and the planet means we’re as invested in the solution as our customers. Joining the ONEMESA team means you’ll have access to benefits designed to meet the needs of you and your family. We offer comprehensive medical benefits, including dental and vision, as well as no-cost extras like annual health assessments and flu shots. Our compensation package includes a company-matched 401(k), life insurance, competitive pay, annual salary reviews with a job progression plan, and a generous profit-sharing program. We are continuously seeking qualified Corrosion Technicians; whether you are entry-level, mid, or senior for upcoming and future projects! This is an evergreen requisition, meaning we are building a pipeline of skilled candidates as new opportunities arise. This position requires extensive travel, with assignments lasting multiple weeks at a time. Daily per diem and hotel accommodations are provided during travel. If your experience aligns with our needs, our team will reach out as positions become available. About the Role: In this role, you’ll help protect critical infrastructure by monitoring, testing, and maintaining corrosion control systems. Depending on your experience level, you may assist with basic field testing or lead advanced inspections, troubleshooting, and program management. This position involves fieldwork, travel, and working outdoors in varying conditions. Responsibilities: • Perform routine and specialized inspections to identify corrosion and material degradation, • Conduct testing such as ultrasonic thickness measurements, coating inspections, and corrosion rate analysis, • Collect and document field data; prepare clear and accurate reports, • Assist with or lead corrosion prevention methods, including cathodic protection and coatings, • Maintain and calibrate testing and monitoring equipment, • Ensure compliance with safety, environmental, and industry standards (API, AMPP/NACE, OSHA), • High school diploma or equivalent., • Ability to follow detailed instructions and SAFETY guidelines., • Good communication skills and ability to work collaboratively in a team environment., • Physical ability to handle tools and equipment, including lifting and standing for extended periods., • Ability to be technically oriented, willing to learn, communicate effectively with customers and team members., • Willingness to work outside and the ability to work both independently and as part of a team, • Must have a valid driver’s license with an acceptable driving record for insurability, • This is a SAFETY-sensitive position and is subject to pre-employment and random DOT drug testing, • Technical training, associate degree, or certification in corrosion technology, materials science, or a related field, • Experience performing corrosion inspections and using related testing equipment, • Knowledge of industry standards such as API, AMPP/NACE, and OSHA, • Experience in oil & gas, petrochemical, or manufacturing environments, • Familiarity with corrosion monitoring software and digital data collection4Certifications:, • AMPP/NACE CP1 certification preferred; required for more experienced roles, • AMPP/NACE CP2 certification required for advanced or senior-level responsibilities, • Assist senior technicians in the installation, maintenance, and repair of equipment and systems., • Prepare and organize tools, parts, and materials required for technical tasks., • Perform routine inspections and basic troubleshooting under supervision., • Maintain accurate records of maintenance activities and report issues promptly., • Ensure compliance with SAFETY protocols and company policies during all technical operations., • Support inventory management by tracking supplies and ordering replacements as needed., • Must be able to move safely over uneven terrain or in confined spaces, such as trenches, pits, and manholes, • Must be able to lift, carry, push or pull objects up to 50 pounds regularly, • Must be able to climb stairs, ramps and ladders regularly, • Sitting, standing, walking, or driving for long periods of time (1-3 hours), • Must be able to see, hear, and respond quickly to dangerous situations, • Primarily working outdoors, including extreme weather conditions, • Working around moving machinery, vehicles, and heavy equipment For this role, we anticipate paying $22 and more per hour. ONEMESA is firmly committed to Equal Employment Opportunities (EEO) and fully complies with all federal, state, and local laws that prohibit employment discrimination on the basis of age, race, color, gender, sexual orientation, national origin, religion, disability, veteran status, and other classifications. This position requires extensive and travel and for several weeks at a time and 1 week off (daily per diem and hotel lodging provided when traveling). Typically Monday - Saturday, between 45-60 hours, OT rules apply.

CoralTree Hospitality - - Responsibilities: Inspect assigned sections (guest rooms, linen rooms, hallways, public spaces, grounds) to ensure cleanliness, safety and condition to meet hotel standards; Maintain and uphold company policies, assist in the development of assigned employees through train

Multifamily Housing Inspectors. Combination (Combinator) Inspectors. Government or municipal inspectors with relevant experience.

The Chief Inspector's duties and responsibilities require that they will be both knowledgeable and experienced in all phases of pipeline construction and inspection. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client a

The unit inspector will execute required inspections accurately in compliance with inspection requirements, practices, guidelines and policies for continuous improvement in stationary equipment as assigned by the mechanical integrity inspector. This will include working with the RBI inspector to det