International government jobs in Torrance, California - Page 2Create job alerts

Job DescriptionDescriptionImpulse Space is seeking an experienced Information System Security Manager (ISSM) to join our IT organization and lead the security and compliance of our information systems. The ISSM will be responsible for ensuring system security and compliance with various frameworks and directives regarding the security of both classified and controlled unclassified information systems. This is a hybrid role: part compliance authority, part hands-on security engineer, and part government-facing representative. The right candidate will thrive at the intersection of technical IT operations and regulatory frameworks, ensuring both audit readiness and practical, secure implementations. ResponsibilitiesSecurity Program Ownership • Serve as the company’s named ISSM and primary point of contact for system security with government agencies., • Establish, maintain, and enforce the cybersecurity program in alignment with cybersecurity and risk management requirements such as CNSSI 1253, DODI 8500.01, CMMC, and export control requirements such as ITAR and EAR., • Develop and maintain required documentation including System Security Plans (SSPs), POA&Ms, and other audit deliverables., • Ensure information systems are categorized, accredited, and authorized per federal and DoD requirements.IT Integration & Hands-On Security, • Work directly with IT staff to implement and validate technical controls across Windows, Linux, VMware, M365, AWS, and network infrastructure., • Partner with Infrastructure and Service Desk to integrate compliance into patching, hardening, access control, monitoring, and backups., • Support identity governance, onboarding/offboarding, and endpoint management (Intune, GPO, MFA policies)., • Deploy, configure, and manage security technologies (SIEM, vulnerability scanning, EDR, firewall logging).Governance, Risk & Compliance, • Conduct periodic self-inspections, risk assessments, and vulnerability analysis to drive continuous compliance., • Map regulatory requirements into actionable IT tasks for audit readiness., • Ensure secure handling, storage, and transmission of classified, Controlled Unclassified Information (CUI), and export regulated information.Incident Response & Monitoring, • Lead incident response activities: detection, investigation, containment, reporting, and remediation., • Oversee continuous monitoring of systems, ensuring logs and alerts are effectively triaged and acted upon., • Collaborate with IT admins to remediate findings and strengthen defense posture.Leadership & Collaboration, • Report to the Director of IT, partnering with Infrastructure, Service Desk, the InfoSec Manager, Facility Security Officer, and Security/Compliance Engineers., • Act as a bridge between compliance frameworks and practical IT implementations., • Mentor IT staff on secure practices and compliance-minded administration., • Provide executive leadership with risk briefings, compliance status, and program maturity reports., • Active TS/SCI with CI Polygraph eligibility., • Bachelor’s degree in Information Security, Computer Science, IT, or related field (or equivalent experience)., • 10+ years of experience in information system security, with at least 5 years in regulated environments (DoD, aerospace, or defense)., • Demonstrated experience working with NIST Risk Management Framework, NIST SP 800-53, and other applicable frameworks to ensure the protection of National Security Systems., • Experience with enterprise IT systems (Active Directory, M365, VMware, AWS, networking, firewalls)., • Experience leading system hardening, vulnerability management, incident response, and audits. Preferred Skills and Experience • Strong communication skills to engage with IT teams, government inspectors, and executive leadership., • Security certifications: CISSP, CISM, CAP, or CMMC-AB credentials., • Demonstrated experience as an ISSM or ISSO at a cleared defense contractor., • Familiarity with security tooling such as SIEMs, EDR platforms, vulnerability scanners, and PKI., • Proven success representing organizations during DCSA or DoD audits. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Manufacturing Engineer (Solar Modules) at Impulse, you will work with cross-functional teams to build solar modules for space applications. You will own the build and testing of solar modules in production. Your expertise will directly impact the reliability and performance of the systems we send into low-earth orbit and beyond. Leveling will be commensurate with experience. Responsibilities· Develop, document, and optimize manufacturing processes for solar modules. · Develop, document, and optimize metrology processes for solar modules. · Collaborate with optical design engineers to ensure manufacturability, DFM/DFA of solar modules. · Collaborate with cross functional teams on quality and long-term reliability. · Manage the solar manufacturing facility, including sourcing equipment and setting processes and policies. · Provide day-to-day support for the production floor, resolving build issues, updating work instructions, and improving yields. · Provide guidance to solar manufacturing technicians. · Support environmental and functional testing in production. Minimum Qualifications· Bachelors' degree in Mechanical Engineering, Electrical Engineering, Materials Engineering, Chemistry, Physics or related field ·4+ years of demonstrated development and/or manufacturing experience with solar modules, either for terrestrial or space applications ·4+ years of experience with setting up a solar manufacturing line, including using stringers and laminators. Preferred Skills and Experience·MS degree in Mechanical Engineering, Electrical Engineering, Materials Engineering, Chemistry, Physics or related field ·6+ years of demonstrated manufacturing experience in solar manufacturing, particularly for the unique demands of space applications ·Expertise with material selection for solar modules used in space applications, including cover glass, adhesives, metallization and backsheets. ·Expertise with space solar module metrology, such as using electroluminescence to inspect for defects and TVAC testing, electrical testing, fill factor calculation, etc. ·Experience with directing the work of technicians · Background in design-for-manufacturing (DFM) and continuous improvement methods space · Experience with managing a space solar manufacturing facility Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Embedded Software Engineer at Impulse focused on Actuation & Control Systems, you will be responsible for developing embedded software that controls a variety of actuated systems across launch vehicles and spacecraft. These include rocket engine valves, satellite thrusters, thrust vector control actuators, and motor-driven devices such as reaction wheels and gimbals. You will collaborate with propulsion, avionics, and GNC teams to design high-performance, fault-tolerant firmware capable of operating reliably in harsh environments such as launch and space. Responsibilities • Develop real-time firmware for controlling: Rocket engine valves and thrust vector control actuators (TVCAs); Satellite propulsion systems, including cold gas and electric thrusters; and Motor-driven systems such as reaction wheels, gimbals, and momentum wheels, • Implement closed-loop control for: Position, velocity, torque, and pressure regulation; as well as Feedback via encoders, LVDTs, resolvers, current sensors, and pressure sensors, • Interface with motor drivers and redundant actuator systems using protocols like CAN, SPI, UART, Ethernet, RS-422, and BISS-C., • Design and implement safety-critical state machines for thrust sequences, valve actuation, pressurization, and safe shutdowns, • Participate in hotfire campaigns, environmental testing, and in-flight diagnostics, • Write unit-tested and reviewable production firmware for use in both testbeds and spacecraft Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or a related field., • 5+ years of embedded C/C++ development experience for electromechanical control systems, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack., • Experience implementing real-time control loops, motor commutation, and actuator calibration routines, • Proficiency working with servo motors, stepper motors, or brushless DC motors, • Strong understanding of low-level hardware and digital interfaces (I2C, SPI, CAN, UART) Preferred Skills and Experience • Prior work on rocket engine controller software, including valve sequencing and abort logic, • Experience with satellite attitude control systems (ACS), including reaction wheels, magnetorquers, and small thrusters., • Familiarity with redundant actuator architectures and fault detection/response algorithms Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Embedded Software Engineer for Camera Systems at Impulse, your primary responsibility will be to design, implement, and maintain firmware for image capture and processing systems on spacecraft. You will collaborate with avionics, flight software, and GNC engineers to interface with imaging hardware, support ground and flight tests, and ensure high reliability under harsh environmental conditions. Responsibilities • Develop low-level drivers and control software for camera modules using interfaces like MIPI CSI-2, USB, SPI, and I2C, • Interface with commercial and custom image sensors, implementing robust and efficient data pipelines., • Implement camera configuration, triggering, and synchronization logic, • Support data capture and streaming during ground tests and in-flight operations, • Collaborate with image processing and perception teams to define firmware requirements and APIs, • Contribute to bring-up, debugging, and tuning of camera subsystems in hardware-in-the-loop setups Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or similar, • 5+ years of experience writing C/C++ code for embedded systems, preferably in imaging or robotic applications, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack, • Strong understanding of I2C, SPI, and MIPI-based camera interfaces, • Familiarity with microcontroller and SoC architectures, especially those used in vision applications Preferred Skills and Experience • Hands-on experience integrating image sensors and camera modules into embedded systems, • Familiarity with image pipeline concepts such as exposure control, gain tuning, and calibration, • Understanding of real-time data handling and buffering for high-rate image streams Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionAbout Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques that allow power-hungry systems to do more with less. Job Summary: We are seeking a Senior Interactive Simulation Developer to lead the development of an immersive simulation environment for mission planning, training, UI/UX testing, and more. The ideal candidate will have a proven track record in developing high-quality products and simulations, particularly in Unreal Engine. As a senior team member, you will oversee the technical development, guide the project, and shape the simulation roadmap. Responsibilities: • Lead the technical development of our in-house simulation platform using Unreal Engine., • Collaborate closely with engineering teams to enhance simulation capabilities., • Work with design and UI/UX teams to develop next-generation user interfaces, • Create simulation scenarios for training users in the operation of our systems.Basic Qualifications:, • Bachelor's degree in computer science or related field., • Strong understanding of computer science fundamentals (algorithms, data structures, object-oriented programming)., • 5+ years of game development experience, with at least 3 years using Unreal Engine (UE4 or later)., • Proven track record of contributing to one or more shipped AA/AAA games or equivalent., • Strong understanding of server-client architecture and network optimization for multiplayer games., • Demonstrated ability to lead a development team, including mentoring junior developers., • Proficiency in C++ and Blueprint scripting, with familiarity with Python., • Familiarity with game development processes, including working with design, development, production, and QA, • Excellent troubleshooting skills and a passion for overcoming technical challengesPreferred Skills and Experience:, • Previous experience with cross-disciplinary engineering projects, • Military service or defense industry experience, • A background in mathematical simulation or training software developmentAdditional Requirements: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $142,100—$178,900 USD

Job DescriptionIntellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments. We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets. We design, develop, and manufacture advanced products for ground, maritime, and airborne applications. We’re seeking an exceptional Shipping/Receiving and Government Property Lead to join our team. The successful candidate will support our fast-paced Shipping and Receiving Department in meeting daily customer demands by working independently to ship customer orders on time and provide outstanding service. They are also responsible for management and administration of Government Property provided to Intellisense Systems to support contract performance. As Shipping/Receiving and Government Property Lead, You Will: • Package and process daily shipments within time constraints. Run required reports and send out shipment notifications daily. Maintain Shipping log daily., • Receive inbound material into system of record and quality data base. Issue material as needed and send receipt notifications as required. Maintain Receiving log daily., • Compare identifying information and counts, weighs, or measures items of incoming and outgoing shipments to verify information against Bills of Lading, Invoices, Purchase Orders, or other records. Attention to detail is critical., • Generate contractually required shipping and receiving documentation for all shipments (Packing Lists, Receiving Reports, Commercial Invoices) using military or customer portals., • Maintain awareness of small pack carrier changes, applicable regulations, customer shipping requirements, freight forwarders and carriers utilized., • Review and follow up on shipping agreements, discounts, claims and carrier issues. Generate LTL quotes and freight for vendors., • Organize finished goods and perform physical counts as needed. Manage and account for packaging materials, replenish as needed to support shipments., • Assist with various material management and government property projects as time permits., • Shipping experience required with UPS, USPS, Fed Ex, DHL, LTL in a military or defense contractor environment., • Generate Export and Import International shipping documents. Reconcile freight Invoices., • Train new Shipping and Receiving employees on basic procedures with the assistance of management., • Maintains government property control system in compliance with government property regulations. Coordinates receiving, identification, inventory, disposition, shipment, and disposal as required per contract. Works with Contracts Management to generate administrative reports as needed for inventory reporting, contract shipments, contract updates and contract closeouts. Issues loss, damage, disposal and destruction reports as needed., • A high school diploma or equivalent is required; Some college/vocational coursework preferred., • 5-8+ years of experience in a technical customer support or logistics role., • Experience executing shipping and receiving tasks independently is required., • Packaging knowledge is required to make decisions on box size and protective packaging with lowest cost and best performance., • Ability to work within deadlines, under pressure and handle interruptions., • Proficient with data entry and Microsoft Office Suite., • Reading, Writing, Math and Communication skills., • Good communication skills, good problem-solving ability and ability to work with a diverse work force., • Team Lead or supervisory experience preferred., • Experience with Government Property and Government Contracts preferred., • The freedom to take risks, to innovate, and to be rewarded., • The ability to deliver products that are continually recognized as industry disruptors. $28.26-$36.00/hour However, base salary for this position will vary based on your skills, qualifications, and experience. Benefits: • 4 Weeks PTO a year (including 40 hours of PTO your first day), • 10 paid holidays, • 401(k) with 100% employer matching up to 4% of salary (no vesting period), • Multiple options for Medical, Vision, Dental Insurance plans, • Health Savings Accounts, • Flexible Spending Accounts, • Tuition Assistance (30% of Tuition with a minimum qualifying grade), • 100% Paid Employee Assistance Program (EAP), • 100% Paid Basic Life and AD&D Insurance, • 100% Paid Workers Compensation Insurance With an immediate 40-hours of paid time off and 100% 401(k) matching up to 4% of your annual salary without a vesting period, we recognize that employees are our greatest resource and that finding the right individuals will make our company even better. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at 424-319-7813 or by email at Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Intellisense Systems, Inc is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. JP 25026-A Powered by JazzHR 18G2CgUVio

Job DescriptionAbout Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job Summary: This is an exciting role in an innovative, high-growth defense technology company. We are looking for a highly motivated Principal Process Improvement Engineer that will lead a cross functional team of engineering, operations, and quality to deliver special projects focused on process improvements with short timelines. This role can be defined as a pressure cooker for advanced cross functional process development and needs someone who is emotionally balanced under high stress situations. The Principal Engineer will lead project teams covering multiple technical areas including project management, risk management, six sigma, inter-departmental communications, and provide regular inputs to VP leaders. The Principal Engineer will work independently with minimal direction but get buy-in from peers and set strategy across functions specific to process improvements. Requires concise communication, proficiency in process improvement, knowledge of emerging tools like Palantir Foundry, and risk management. The ideal candidate should be able to teach new team members and be a role model for career development. Responsibilities: • Report to the Vice President of Process Improvement and Quality, • Define project scope, timelines, and deliverables; ensure execution aligns with business goals, • Collaborate with engineering, operations, finance and business development to ensure process alignment, • Identify technical risks early and develop mitigation strategies to keep projects on track, • Provide regular updates to senior leadership, • Leverage engineering knowledge to guide architecture decisions and ensure technical feasibility, • Drive continuous improvement in workflows, tools, and methodologies to boost efficiency and qualityBasic Qualifications:, • 8 years of experience with a Bachelors degree, • Expert with JIRA, Confluence Preferred Skills and Experience:, • Demonstratable experience leading both software and hardware projects, • Familiarity with Palantir Foundry, • Collaborative; capable of working across all levels of the organization, • Organized; comfortable working in a fast-paced, ever-changing environment, • Masters degree ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $126,300—$150,000 USD

Job DescriptionAbout Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job Summary: This is an exciting role in a growing company. The ideal candidate for the Senior Principal Electronics Process Engineering position is someone who has experience or can lead the implementation of a new PCB manufacturing line, with a specific focus on pallet bonding and surface mount technology (SMT) processes. This role will be instrumental in driving process development, ensuring manufacturing efficiency, and optimizing production workflows to support high-quality PCB assembly. The ideal candidate will have a strong background in PCB manufacturing, SMT, and process engineering, along with experience in equipment selection, validation, and continuous improvement methodologies. Responsibilities: • Lead the planning, development, and implementation of pallet bonding equipment, SMT and manual electronics assembly at low/mid volumes, ensuring adherence to quality, efficiency, and industry standards, • Identify and implement lean manufacturing principles, Six Sigma methodologies, and automation solutions to optimize production workflows., • Monitor and analyze process performance metrics, troubleshoot defects, and implement corrective actions to enhance product yield and quality., • Partner with engineering team members in the new product introductions (NPI) by developing and iterating on board and box level assembly processes., • Identify and implement Process Failure Modes and Effects Analysis for PCB related company products, • Provide inputs to manufacturing plans and operation strategy, • Develop trainings and standards for the production technician, and engineering teams to work with implemented equipment Basic Qualifications:, • Bachelor's degree in Mechanical, Electrical, Material, Chemical, or other related engineering degree, • 12+ years of experience in manufacturing/mechanical/material engineering role or production environment, • Expertise in pallet bonding techniques, surface mount technology equipment stencil design, solder paste application, reflow soldering, and AOI, • Hands-on experience with SMT equipment, including pick-and-place machines, reflow ovens, wave soldering, and conformal coating, • Strong understanding of Design for Manufacturability and Design for Assembly principles., • Ability to work extended hours and weekends as needed, • US Citizen (future security clearance may be required) Preferred Skills and Experience:, • Aerospace/Defense experience and/or military experience, • Knowledge of geometric dimensioning and tolerances, • Experience with automation, robots, and other factory 4.0 technologies, • Proficient in documenting detailed assembly instructions with 3D models, pictures, diagrams, and text, • Good written and oral communication skills, • Collaborative; capable of working across all levels of the organization, • Knowledge of Production Systems and Lean Manufacturing elements, • Knowledge of Environmental, Health and Safety elements, • Use of SolidWorks, 2D and 3D modeling software, • Experience with RF Products, Electromechanical assembly and test, • Experience with ISO9001/AS9100 quality management systems elements ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $175,000—$206,000 USD

Job DescriptionAbout Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques that allow power-hungry systems to do more with less. Job Summary: This is an opportunity to join a team of skilled software engineers developing across the full stack down to bare metal. We are tackling new and critical problems and developing products ranging from energy weapons to AI-powered sensors and drone swarm defense. As we enhance, scale and deploy our systems, we need software engineers who want to take ownership and work closely with a skilled team from planning through implementation. At Epirus you will: · Create User Interfaces for cutting-edge systems, not just apps • Create reliable and real-time optimized UIs, • Innovate to solve problems that are novel and critical to our nation, • Be a part of a talented team of skilled and experienced engineers and managers, • Make powerful insights into our architectural decision-making, including framework trade-offs, state-management solutions, API and business layer patterns, and error-handling strategies, • Collaborate effectively with UX/UI designers to ensure the seamless translation of design concepts into functional, user-friendly interfaces, • Collaborate effectively with our backend teams to improve API designs, • Integrate novel front-end tech into our stack, • Take ownership of significant new features and plan them with meaningful technical document requirements descriptions, design wireframes, and software design diagrams, • Optimize not just performance but developer experience, CI/CD, and testing, • Be a force for readability and clean coding patterns in our codebase., • Mentor and collaborate effectivelyBasic Qualifications:, • Bachelor's degree in Computer Science, Engineering, or related field, or equivalent experience., • 5+ years of professional front-end/UI development experience, JavaScript and TypeScript Expert, • Mastery in building UI applications with React, • Competence in at least one set of front-end build tools, bundling, and transpilation, • Competence in at least one set of testing frameworks for unit, integration, and e2e testing (e.g., Jest, Playwright), • Mastery of CSS, SASS, and experience with Bootstrap, Tailwind, Material-UI, Shadcn, • Experience optimizing performance for real-time React applications, • Experience with Agile/Scrum development, • Experience working with a design/development pipeline, • At least 1+ years with at least one of the following: web-based 3d rendering, data visualization, mapping librariesPreferred Skills and Experience: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $163,300—$187,000 USD

Job DescriptionDescriptionAs an Avionics Mechanical Engineering Intern your core responsibility will be to design, manufacture, and test the mechanical elements of spacecraft avionics. You will work closely with electrical, propulsion, GNC, and vehicle structures engineers to execute on architectures and products that maximize overall vehicle performance. This internship will run from May to August 2026. Responsibilities • Evaluate requirements, develop mechanical design, generate drawings for various avionics systems and devices, • Conduct design reviews to gain cross-disciplinary consensus on design validity, • Design products for ease of manufacture, and work with suppliers to get parts fabricated, • Perform hand calculations and FEA to predict system performance, • Analyze structural modes, thermal performance, and other critical aspects of avionics devices, • Currently enrolled in a bachelor’s or master’s program in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, or related field, • Experience designing mechanical components in CAD software, • Understanding of static loads and methods of heat transfer, • Understanding of fabrication methods, such as CNC milling and 3D printing, • Familiarity working hands-on with basic mechanical tools, • Ability to work in a fast-paced environment and learn new skills, • Experience using NX and Ansys Mechanical, • Understanding of EMI shielding design, • Understanding of the basics of vibrations and associated analysis, • Experience working on a team with a mix of mechanical and electrical engineers, • Willing and able to work on-site in Redondo Beach, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Development Test Engineer at Impulse, you will be responsible for all aspects of test equipment design and test operations while working closely with a fast paced, agile team that produces high-performance spacecraft from clean sheet designs. Responsibilities • Design and build fluid, mechanical and electrical systems in support of liquid rocket propulsion and spacecraft systems testing, • Fully own key test assets and major test programs while collaborating with wide ranging teams across the company, including Redondo Beach and Mojave, • Coordinate with external vendors and contractors to meet project technical and schedule objectives, • Perform test setup, hardware inspections, checkouts and troubleshooting as needed, • Conduct test operations geared toward rapidly developing hardware for spaceflight, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in mechanical, aerospace, electrical engineering or related field, • 5+ years of experience in hardware development testing, • Strong engineering fundamentals in thermal, structural, and fluids analysis, • Prior hands-on operational experience working with aerospace test facilities, • Previously demonstrated ownership of test stand design and build-up, • Able to create and clearly communicate fluid P&IDs, electrical and controls schematics, • Able to identify and procure appropriate test equipment, • Proficient with data acquisition and control methods, • Demonstrated ability of taking project ownership and working well in small teams Preferred Skills and Experience • Demonstrated prior experience working with complex systems including cryogenic propellants, high pressure gas systems, hydraulics and/or combustion devices, • Demonstrated working knowledge of components (valves, regulators, sensors, power supplies) and hands-on skills (tube fabrication, metalworking, wiring), • Demonstrated hardware testing experience with rocket engines, or spacecraft, • Experience in a startup or agile development environmentAdditional Requirements: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Mechanical Engineer at Impulse for our Vehicle Engineering Team, you are responsible for the design, build, test/analysis & integration of your hardware– working with cross-functional engineering teams to accomplish this. This means cradle-to-grave ownership of primary/secondary structure and critical space mechanisms in support of Impulse’s collection of next generation advanced propulsion space vehicles. Responsibilities • Own all aspects of hardware development and execution, from concept through launch and orbital maneuvers, • Formulate the comprehensive cradle to grave Road Map for your hardware, • Establish driving loads and develop efficient structural design using first principles to inform critical architecture decisions on primary and secondary structures, • Perform and document analysis with clear objectives to support design intent including hand calculations, finite element analysis, and kinematic analysis, • Identify, specify, and source commercial components to support design intent as required, • Incorporate manufacturing trades into conceptual design to explore different construction methods including machined, formed, welded, composite, or other opportunities, • Proactively guide all aspects of your hardware’s maturity, project managing your hardware’s end users, stakeholders, and adjacent contributors to ensure all aspects of the system continue to mature together and that your assumptions are well understood outside yourself and remain valid, • Communicate effectively to ensure adjacent designs (such as propulsion, electrical, software and controls subsystems) are accounting for and supporting your hardware assumptions, • Produce engineering drawings with required specifications for manufacturing, • Generate Test Plans and provide direct support to ensure successful execution of your hardware’s structural qualification and acceptance testing., • Work with internal manufacturing team and external sources to procure materials, fabricate parts, and complete assemblies, • Update designs and documentation to support continuous improvement Minimum Qualifications • Bachelor's degree in engineering or related field, • 2+ years of demonstrated experience in mechanical design, • Demonstrated proficiency in CAD software with ability to learn new tools, • Demonstrated ability to model complex shapes including lofting and surfacing, • Demonstrated ability in conceptual design, fabrication and testing of hardware, • Demonstrated experience working collaboratively across different teams, • Ability to communicate technical challenges, explain rationale and/or resolve concerns Preferred Skills and Experience • Masters' degree in mechanical or aerospace engineering, • 5+ years' of demonstrated mechanical design & analysis with space-flown hardware, • 2+ years' of demonstrated understanding of geometric dimensioning & tolerancing (GD&T), • 2+ years' of demonstrated experience with Finite Element Analysis (FEA), • Capable of performing basic structural and thermal analysis in support of design, • In order to be successful in this role, you should be someone who is uniquely creative, self-driven, and is able to lead his or her own projects to completion Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescription As a Spacecraft Integration Specialist at Impulse, you will be responsible for leading and executing the physical and functional integration of spacecraft subsystems and payloads. You will work closely with engineering, manufacturing, test, and operations teams to ensure all components come together into a flight-ready vehicle. Your work will directly impact the success of our space missions. Responsibilities • Assemble and integrate electrical, mechanical, thermal, propulsion, and avionics subsystems into the spacecraft structure according to engineering specifications and test procedures, • Develop and maintain integration schedules, procedures, and checklists; ensure alignment with project milestones and delivery dates, • Identify and resolve integration issues in real-time, including misalignments, electrical anomalies, or software mismatches, • Assist in functional, environmental, and system-level testing, including vibration, thermal vacuum, and EMI/EMC testing, • Maintain accurate integration records, logs, and configuration management throughout the spacecraft build, • Work with design engineers, systems engineers, and technicians to optimize the integration process and resolve cross-disciplinary issues Minimum Qualifications • 3+ years of experience in spacecraft, satellite, or aerospace hardware integration, • High School Diploma or equivalency certificate, • Hands-on experience working with spaceflight hardware in cleanroom environments, • Strong understanding of spacecraft subsystems and system-level integration practices, • Proficiency in reading engineering drawings, wiring diagrams, and interface control documents, • Familiarity with tools such as CATIA, SolidWorks, or Siemens NX, and PLM systems, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or a related field, • 8+ years demonstrated experience with small satellite (CubeSat/SmallSat) or large-scale spacecraft integration, • 6+ years demonstrated experience with electrical harness routing, connector mating, and safe-to-mate checks, • Knowledge of environmental testing standards (e.g., MIL-STD-1540, NASA GEVS), • Experience working with launch vehicle integration teams or launch site operations Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an RF Engineering Intern, your core responsibility will be to design, manufacture, and test custom RF systems. You will work with RF engineers, avionics engineers, software engineers, and mechanical engineers. You will have the opportunity to contribute to various aspects of spacecraft RF system development, including component selection, bench testing, system bringup, and manufacturing. This internship will run from January to May 2026. Responsibilities • Evaluate and select RF components from various vendors for system integration, • Run simulations and generate link budgets for early-stage wireless designs, • Design and execute validation plans for RF system designs, • Work on RF schematics, layout, and manufacturing for test and/or flight products, • Currently enrolled in a bachelor’s or master's program for Electrical Engineering, Computer Engineering, or related area., • Experience troubleshooting PCBs at the board or system level, • Understanding of RF and microwave concepts such as transmission lines, S-parameters, amplifiers, splitters, etc., • Python scripting experience, • Previous usage of simulation tools such as ADS, CST, HFSS, etc., • Experience working with test setups for PAs, LNAs, or filters, • Experience working on a team with a mix of hardware and software, • engineers, • Experience with Altium Designer Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Propulsion Development Engineer of rocket engine nozzles at Impulse , you will own all aspects of in-house nozzle design, analysis, implementation and operation while working closely with a fast-paced, agile team that produces high-performance spacecraft from clean sheet designs. Impulse is developing several high expansion ratio rocket engines where nozzle performance will be essential to meet mission objectives. In this role you will develop a specific set of design, analysis, manufacturing and test principles to build and fly reliable, high performance nozzles. Responsibilities • Own all aspects of nozzle development to production, • Conduct analysis and testing to ensure that the performance and function of hardware meets intent, • Prepare, plan and execute tests including engine hot fire testing and structural acceptance testing, • Work with wide-ranging teams across engineering, manufacturing and operations to deliver a reliable, high-performance and highly integrated nozzle system, • Resolve technical issues with innovative resourceful solutions, including custom tooling, instrumentation, test article designs, and associated equipment., • Maintain project schedule, key milestones, and process documentation., • Coordinate outsource vendor operations and the sourcing of specialty high temperature materials., • Bachelor's degree in engineering or science, • 5+ years of demonstrated experience in the aerospace propulsion field, • Prior experience working on bipropellant rocket propulsion systems, • Proficiency in basic principles of fluids, thermodynamics, heat transfer, mechanics and materials, • Ability to perform system trades ranging from thermal-fluids analyses to materials selection, • Hands-on experience working with fluid, mechanical, electrical and controls systems, • Ability to operate complex test systems including vacuum pumps, furnaces, and vacuum chambers, • Demonstrated ability of taking project ownership and working collaboratively with small teams, • Familiarity with high temperature materials (e.g. refractory alloys and ceramic composites) and their associated fabrication and joining processes. Preferred Skills and Experience • Master’s degree in aerospace or mechanical engineering, • Prior experience working in lead roles on propulsion development programs, • Proficiency in CAD software with ability to learn new tools, • Proficiency in the principles of nozzle design and operation including: radiation cooling, performance optimization, and relevant coatings, • Experience in a startup or agile development environment Additional Requirements:, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionAbout Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques that allow power-hungry systems to do more with less. Job Summary: This is an exciting role in a growing company. The ideal candidate for the Principal Category Manager position is someone who is a skilled negotiator, has a strong strategic supplier vision, and has experience setting supplier strategies for long-term success. You will be responsible for source selection from proposal to execution phases, including negotiating strong positions for Epirus and building and maintaining strong supplier relationships. You will work with engineering to develop specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and/or services by preparing bid packages, ensuring competition, negotiating key provisions, select suppliers, and executing the award. This individual may be required to provide input and/or share their experience in establishing internal PCBA manufacturing, including capital equipment selection, preventative maintenance schedules, process flow, and identifying potential supplier needed working with production, advanced electronics, industrial and manufacturing engineering teams. Responsibilities: • Act as the sourcing and supplier expert in the PCBA space (specifically custom Epirus designs), but able to flex into multiple areas, • Collaborate across business functions to identify supplier needs and negotiate strong pricing, terms & schedules with suppliers for development and production programs, • Own and manage the full sourcing and procurement activities from development through production and final contract close out, including managing and avoiding cost & schedule scope creep, • Review cross-team capabilities and ensure the supply base has appropriate manufacturing capacity and quality yield to enable aggressive ramp up of production, • Manages the spend and supplier spend distribution for assigned mechanical commodities, including adding new suppliers as required, • Head supplier relationship by ensuring alignment to Epirus needs, define escalation protocol, and audit and inspect supplier's facilities to accurately assess technical capability, equipment, and capacity for rapid deployment of new product development and long-term production, • Conduct comprehensive supplier analysis to inform 'Make vs. Buy' decisions, down select an optimal sourcing plan taking short term NPI requirements and long term production rates, technology replacement, price trend, market and industry position, and risk assessments into account, • Deliver a seamless transition of viable new technologies into the product development process managing risks while meeting quality, schedule, and cost goals., • Collaborate across multiple functions to identify business needs, negotiate the right tradeoffs, solicit cooperation and resolve problems, and advance new supplier or product offerings., • Mentor other supply chain team members in developing skills., • Support other efforts, such as supply chain compliance, ERP development and other key company projects Basic Qualifications: • BS degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Business, Supply Chain, Operations Management or related field, • Minimum of 12 years of subcontract, commodity or supplier management experience OR minimum 8 years with a Master's degree, • Understanding of supplier risk identification, mitigation and contingency planning, • Direct design for manufacturing or design for quality experience, • Previous experience in TCO analysis, • Previous experience in negotiation of price and terms and conditions, as well as awarding and managing supplier owned IP products or products designed from a statement of work, • Direct experience and understanding of the end to end PCB/PCBA manufacturing process flow, • Experience managing a program and working with cross-functional teams Preferred Skills and Experience: • MBA preferred, • Aerospace/Defense experience and/or military experience, • Experience working with FAR/DFAR Experience in Earned Value Management or related financial management experience, • Component electronics manufacturing experience, • Good written and oral communication skills, • Collaborative; capable of working across all levels of the organization, • Organized; comfortable working in a fast-paced, ever-changing environment Additional Requirements: • May be required to retain a TS Clearance ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $160,000—$189,500 USD

Job DescriptionDescriptionAs a Space Operations Engineer Intern at Impulse Space, you'll support real-world spacecraft missions by assisting with the planning, development, and testing of mission operations. You’ll work closely with experienced engineers on a variety of tasks ranging from simulation support to test execution and procedure development. This internship offers hands-on exposure to real-time spacecraft operations and mission-level engineering. and operations for ambitious near-Earth and interplanetary missions. The internship will run from May to August of 2026. Responsibilities • Assist in developing and testing operational procedures for spacecraft missions, • Support mission simulations and rehearsals using hardware- and software-in-the-loop environments, • Help create tools and scripts to automate operational tasks, • Collaborate with subsystem teams to gather inputs and refine operations plans, • Participate in reviews, test campaigns, and anomaly investigations as needed, • Recent completion or currently pursuing a Bachelor's or Master’s degree in engineering, physics, or a related technical field, • Familiarity with scripting or programming (e.g., Python, C++, MATLAB), • Strong problem-solving skills and attention to detail, • Ability to work in a fast-paced, team-oriented environment Preferred Skills and Experience • Prior internship, research, or project experience related to aerospace or mission operations, • Exposure to systems engineering, GNC, avionics, or spacecraft autonomy concepts, • Experience working with test setups, simulations, or command/control tools Additional Requirements:, • Willing and able to work on-site in Redondo Beach, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionAbout Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job Summary: We're seeking a Cost Accounting Manager to join our dynamic, fast-growing defense technology company. As we scale manufacturing operations and transition to Oracle Fusion ERP, this role will be instrumental in building the foundation of our cost accounting function. You will lead the development and implementation of standardized cost processes, ensure accurate product costing, and support government contract compliance (FAR, DFARS, CAS). This is a high-impact role ideal for someone who thrives in a startup environment, embraces complexity, and takes ownership of building scalable systems from the ground up. Responsibilities: • Develop and maintain standardized cost accounting processes across manufacturing and supply chain., • Calculate and maintain accurate standard costs for materials, labor, and overhead., • Prepare cost reports and variance analyses to support operational and financial decision making., • Support the reconciliation and valuation of inventory, ensuring accuracy and compliance with U.S. GAAP., • Collaborate with operations, engineering and supply chain to resolve inventory discrepancies and strengthen internal controls., • Assist in preparing cost data for pricing, bids, and proposals, including government contracts, ensuring compliance with FAR/DFARS and CAS as applicable., • Support monthly and quarterly close by preparing journal entries, reconciliations, and supporting schedules related to inventory and cost accounting., • Help document and improve cost accounting processes as the company implements Oracle Fusion ERP., • Assist with external audits, DCAA audits and Incurred Cost Submissions (ICE), as needed., • Bachelor's degree in accounting, finance, or related field, • 8+ years of experience of cost accounting within a manufacturing environment, • Strong understanding of inventory accounting, standard costing, and variance analysis., • Experience with Oracle Fusion or similar ERPs., • Proficiency in Excel and experience with large datasets., • Self-starter with strong analytical and problem solving skills., • U.S. citizenship required (due to the nature of defense contracting requirements) Preferred Skills and Experience: • Experience in a public company environment, • Familiarity with government contracting regulations (FAR/DFARS, DCAA, CAS), • Exposure to DCAA audit process and ICE submissions Physical Requirements: • In office 4x per week ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $114,000—$147,000 USD

Job DescriptionAbout Epirus Epirus is a high-growth technology company developing software-defined high-power microwave (HPM) systems with devastating counter-electronics effects on modern drone threats. The Epirus Leonidas HPM family of products, empowered by innovations in AI and microelectronics, is human-safe and cost-effective. Distinguishing itself from lasers, Leonidas excels against drone swarms while also bending the cost curve back in DoD's favor - taking drone defeat costs from millions of dollars per drone to pennies on the dollar. Job Summary: This is an exciting role in a growing company. We are looking for interns to join us on a 10-week internship program. This will be a hands on and in-person position. Basic Qualifications: • Pursuing a Bachelors degree in Mechanical Engineering, Industrial Engineering or any related field, • Rising senior or beyond at time of internship and have a graduation date between 12/2026 - 12/2027. All applicants should be returning to school at the end of their internship to continue their academic studies., • Prior internship, collegiate project team, or laboratory experience, • U.S. Person status is required as this position needs to access export-controlled data ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $36—$38 USD

Job DescriptionDescriptionAs a Thermal Engineer at Impulse, you will be responsible for thermal management of spacecraft from concept, analysis, and design, to implementation, testing, and flight while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. Responsibilities • Develop and maintain thermal models of spacecraft, systems, and components, • Determine appropriate physical properties, environments, and boundary conditions, • Select and design of thermal management hardware, • Oversee and define thermal cycle and vacuum testing of components and spacecraft, • Analyze test data to correlate models and improve model fidelity, • Collaborate with design engineers to implement effective thermal management strategies, • Communicate with suppliers to determine properties and specify requirements of materials, • Bachelor’s degree in mechanical or aerospace engineering, • 1+ years' of demonstrated experience in developing and maintaining thermal models of spacecraft, systems, components, etc., • 1+ years' of demonstrated experience in selection/design and implementation of thermal management hardware such as heat pipes, radiators, heaters, thermal paint, tape and MLI, • Ability to perform thermal testing, flight/ground testing and data analysis, • Graduate work in numerical methods or heat transfer, • Creative solutions to complex problems, • Experience with successful thermal management strategies, • Experience with cryogenic fluids and fluid analysis software such as Starccm+, • Experience with Siemens Simcenter / Ansys Thermal and Thermal Desktop, • Prior experience with spacecraft design, • Experience working on a launch vehicle or satellite development effort, • Experience in a startup or agile development environmentAdditional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Development Test Engineering Intern, you will work on all aspects of development test equipment while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. Responsibilities • Design and build fluid, mechanical and electrical test systems in support of liquid rocket propulsion and spacecraft systems testing, • Collaborate with wide ranging teams across the company, including Redondo Beach and Mojave., • Perform test setup, hardware inspections, checkouts and troubleshooting as needed, • Recent completion or working towards Bachelor’s degree in Engineering or Science or related field, • Demonstrated ability to take project ownership and work well in a small team, • Demonstrated hands-on experience working with fluid or mechanical systems, • Preferred Skills and Experience, • Working knowledge of components (valves, regulators, sensors, power supplies) and hands-on skills (tube fabrication, metalworking, wiring), • Prior experience working with pneumatic, hydraulic or electromechanical test equipment, • Prior experience in propulsion development and/or testing Preferred Skills and Experience • Working knowledge of components (valves, regulators, sensors, power supplies) and hands-on skills (tube fabrication, metalworking, wiring), • Prior experience working with pneumatic, hydraulic or electromechanical test equipment, • Prior experience in propulsion development and/or testing Additional Requirements, • Willing and able to work on-site in Redondo Beach, CA or Mojave, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description JOB SUMMARY Experienced tax manager to lead and manage worldwide tax functions for 100+ U.S. and foreign entities engaged in consumer products manufacturing and sales, real estate, and hospitality. Complex U.S. federal, state, and foreign tax planning and research, prepare and review of domestic and foreign corporate, partnership, and individual income tax returns, trust, estate & gift tax planning and compliance, sales & use, property, and other tax returns, coordination of in-house tax compliance function, planning, and compliance, transfer pricing, and tax examinations to minimize worldwide tax and compliance costs and risks for a closely held group of entities in a family office environment. Hands-on team player, practical, creative, detailed and analytical problem solver. Review of financial statements and tax provisions. Mentor, supervise, and train tax department employees. Essential Duties and Responsibilities *A successful Tax Manager in the Tax Department must spend over 90% of work time on, and satisfactorily perform, these general categories of duties, which require significant discretion and independent judgment. Responsibilities include, but are not limited to: • Prepare and review federal, state & local income tax returns for high-net-worth individuals., • Prepare and review foreign tax credits for high-net-worth individuals., • Perform and review complex federal, state & local, and international individual, trust, partnership, and corporate income and estate & gift tax research and planning., • Monitor proposed, pending, and actual changes in income, state & local, and international taxation with a view towards their impact on the affiliates and principals., • Prepare and review tax estimates and extensions related to 100+ affiliate federal and state individual, partnership, and corporate income tax returns., • Prepare and review detailed schedules used to prepare the affiliates' and principals’ tax returns., • Prepare and review the affiliates' and principals’ tax returns., • Initiate and review detailed proforma federal, state & local, and international individual, trust, partnership, and corporate income, and estate & gift tax calculations., • Mentor and supervise the tax department employees., • Oversee internal and external technical training for all tax department employees., • Review of various other regulatory and tax filings., • Supervise sales & use tax research for existing and new products for numerous state and local jurisdictions and review sales & use tax returns and payments for numerous state & local jurisdictions., • Assist with tax authorities’ examinations of income, property, excise, and sales & use tax returns., • Oversee preparation of transfer pricing reports for various affiliates., • Review internal and audited financial statements and related items for domestic and foreign affiliates. 1 This list is a summary and not inclusive of all essential duties. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • Minimum of 7 years or large accounting or law firm tax experience with increasing levels of responsibility., • CPA, MST, or JD required., • Microsoft Word, Excel, PowerPoint, Acrobat, Thomson Reuters individual and entity tax software. Ability to perform Google searches for technical information and to enter information on various corporate and government websites., • Approachable team player with excellent interpersonal and written communication skills., • Ability to prioritize job tasks in order of changing priority and in a deadline-driven, fast-paced work environment., • High degree of integrity; able to handle confidential information with absolute discretion., • Strong initiative (drive, sense of urgency) and flexibility., • Detail-oriented with a high degree of accuracy, including data entry and mathematical aptitude. Highly organized and able to simultaneously handle multiple projects with total accuracy and attention to detail., • Strong organizational, administrative skills and the ability to multitask with accuracy and attention to detail., • Ability to meet deadlines and follow directions., • Excellent time management skills and a demonstrated ability to remain calm under pressure., • Adaptable and comfortable with change, focused on continuous Improvement., • Thrive in a deadline-driven environment and have the ability to respond well to changing priorities, workflows, and information., • Must be able to multitask and work well under pressure., • Ability to work independently as well as in a team environment., • Excellent written and verbal communication skills, • Analytical Skills: Possess basic mathematical skills, critical thinking, and problem-solving skills., • Excellent organizational skills with good attention to detail and accuracy. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand or walk. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and depth perception.

Job DescriptionDescriptionAs a Sr. Soft Goods Engineer at Impulse Space you will develop and manufacture state-of-the-art soft goods and multi-layer insulation (MLI) builds for current & future vehicles. You will work with cross-discipline engineering teams & outside vendors to deliver flight hardware. Responsibilities • Develop manufacturing processes to fabricate parts with MLI’s and spacecraft textile products, • Own process development, build, test, and integration for both flight and development hardware, • Generate soft goods manufacturing standards, work instructions, and process specifications, • Tooling design for part fabrication, shop aids, and assembly, • Work directly with technicians to produce high-quality hardware, • Work directly with outside vendors, • Spec, purchase, and implement equipment to aid in part fabrication, • Develop and implement shop floor layouts to establish new production cells, • Bachelors’ degree in mechanical engineering, materials engineering, aerospace engineering, or a similar field, • 5+ years of direct hands-on manufacturing experience in a production and/or development environment, • 2+ years of direct hands-on experience with part fabrication utilizing MLI’s and soft goods, • Proficiency with CAD software and the ability to learn new tools Preferred Skills and Experience • Masters' degree in mechanical engineering, materials engineering, aerospace engineering, or a similar field, • 5+ years of direct hands-on experience with part fabrication utilizing MLI’s and soft goods, • 4+ years of demonstrated experience working on soft good for launch vehicles, spacecraft, or satellites, • Develops creative design solutions to complex problems, • Ability to work with complex assemblies, • Experience with Siemens NX, • Experience in a startup or agile development environment Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an Antenna Engineering Intern at Impulse, your core responsibility will be to support design, test, and integration of antenna systems for spacecraft communication systems and GNSS receivers. You will work with antenna engineers, RF engineers, avionics electrical engineers, mechanical engineers, and others to develop performant and maintainable solutions. Your contributions will range from scripting for early antenna design to integration testing to supporting antennas at the vehicle level. This internship will run from May to August 2026. Responsibilities • Perform antenna testing using test chambers and analyze test data, • Analyze real-world performance of antennas, debug antenna issues on completed vehicles, and investigate methods to improve vehicle radiated performance, • Support RF and avionics teams by performing EM simulations of PCBs and other vehicle structures for desense analysis, co-existence simulations, and transmission loss, • Contribute to design of antennas for Impulse’s future vehicles, • Work closely with RF engineers and mechanical engineers to integrate antenna designs into RF front ends and vehicle structures, • In progress Bachelor’s degree in Computer Engineering, Electrical Engineering, or related, • 1+ year experience in antenna, RF, or electrical hardware design, bringup, and test, including lab work and university projects, • Experience writing Python, MATLAB, or another scripting tool, • Experience doing RF system-level testing in the lab using equipment such as spectrum analyzers, power meters, oscilloscopes, and noise figure analyzers., • Familiarity with a PCB design software such as KiCad, Altium, or Cadence, • Experience working closely with mechanical and vehicle engineers to integrate antenna or electrical designs with mechanical hardware, • Experience analyzing antenna systems in the lab (s-parameters, isolation, radiation patterns, propagation effects, etc), • Familiarity with 3D EM simulation tools such as CST, HFSS, ADS, FEKO, COMSOL, or Cenos, • Experience in a start-up or agile development environment Additional Requirements:, • Willing and able to work on-site in Redondo Beach, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Avionics Electrical Engineer, you will design and test custom circuit boards and other avionics devices, mentor less experienced engineers, set high standards, and guide the technical direction of the avionics team. You will work directly with software engineers, propulsion engineers, GNC engineers, and others. You will have the opportunity to contribute to all aspects of spacecraft electronics development, from architecting new systems to building and operating them. Responsibilities • Contribute to new spacecraft avionics architecture trades, • Develop circuit boards for spacecraft, with an emphasis on digital, • electronics, • Perform rigorous analyses and simulations of avionics devices and systems, • Perform development testing of hardware in the lab, from a single circuit, • board to an entire system including non-avionics elements, • Own hardware through qualification and flight operations, • Establish and maintain high technical standards and mentor less, • Bachelor’s degree in Electrical Engineering or related field, • 4+ years professional experience designing digital electronics for rockets,, • spacecraft, or other vehicles, • Proficiency with electronics component selection, analysis, simulation,, • schematics, and layout, • Knowledge of digital circuit design concepts including signal integrity,, • timing, etc., • Experience troubleshooting electronics problems at the board level or, • system level, • Desire to improve team processes and train other team members, • Ability to communicate technical challenges, explain rationale and/or resolve, • Master’s degree in Electrical Engineering or related field, • Experience with Altium Designer, • Experience doing new development work for any of the following:, • processors, FPGAs, DSPs, cameras, ethernet switches, or any other, • specialized area relevant to spacecraft or rockets, • Experience designing high speed digital interfaces such as DDR4/5, PCIe,, • RGMII/SGMII, Ethernet, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an Avionics Technician (Opto-mechanical) at Impulse, you’ll be responsible for assembling, inspecting and reworking optical and opto-mechanical assemblies used in low-earth orbit and beyond. Your work will directly impact the reliability and mission success of our Mira and Helios spacecraft. Responsibilities· Perform opto-mechanical and electromechanical assembly work. · Interpret and work from detailed engineering drawings, wiring diagrams, schematics, and work instructions ·Use optical metrology tools to check quality of optical assemblies. · Troubleshoot issues and rework optical assemblies. · Work with manufacturing engineers to improve assembly rate and efficiency · Collaborate with engineers and quality assurance on issue resolution, process improvements, and documentation updates. · Record build data and ensure traceability of parts and workmanship per aerospace standards. Minimum Qualifications· High school diploma or equivalency certificate ·4+ years of experience with opto-mechanical assembly, such as assembling and aligning lenses and mirrors. · 4+ years of experience in a production environment, e.g. in aerospace, automotive, consumer electronics, etc. · Attention to detail · Excellent communication (written and verbal) and teamwork skills Preferred Skills and Experience Additional Information: ·2+ years of experience operating centration machines and interferometers ·2+ years of experience with adhesives in a production environment · 5+ years of demonstrated experience working on opto-mechanical assemblies for space applications. ·Electromechanical assembly experience · Cleanroom experience Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Overview The Equipment Calibration and Qualification Technician performs calibration and qualification of research and manufacturing equipment, ensuring regulatory compliance with FDA's 21 CFR Part 820 and ISO 13485, and compliance with other standards. Responsibilities include calibrating equipment, executing qualification protocols, maintaining calibration records, coordinating external services, and supporting validation activities. The role requires hands-on work with precision measurement tools, strong attention to detail, regulatory knowledge, and excellent documentation skills. This full-time, on-site position also involves assisting with other Quality Assurance and validation tasks as needed. Reports to: Vice President of Quality Assurance & Regulatory Affairs Duties and Responsibilities: The Equipment Calibration and Qualification Technician's responsibilities include: • Managing all calibration of manufacturing and laboratory equipment, including torque wrenches, pressure gauges, temperature sensors, analytical balances, micrometers, calipers, and other precision measuring instruments., • Ensuring all calibrated equipment is labeled and that calibration or qualification has not expired., • Maintaining accurate calibration records, certificates, and documentation in compliance with FDA 21 CFR Part 820, ISO 13485., • Updating the equipment database with the current qualification and requalification status,and using it to ensure the timely completion of all activities, whether performed internally or externally., • Providing calibration and qualification status reports and metrics to management and support teams., • Writing, performing, and documenting equipment qualification activities, including Installation Qualification (IQ), Operational Qualification (OQ), Performance Qualification (PQ), and Preventive Maintenance (PM)., • Supporting validation activities for new equipment, as well as modification or relocation of existing equipment., • Supporting internal and external audits by providing calibration and qualification documentation, technical expertise, and responses to audit findings related to measurement systems and calibration processes., • Participating in corrective and preventive action (CAPA) investigations related to calibration and qualification non-conformances, equipment failures, and measurement system issues. The Equipment Calibration and Qualification Technician should use existing skills to perform calibration and qualification procedures, maintain documentation, and ensure regulatory compliance in individual and team projects. The following abilities may assist in completing these tasks. • Proficient with precision measuring instruments, including micrometers, calipers, torque wrenches, pressure gauges, temperature sensors, analytical balances, and electronic test equipment for calibration activities., • Strong computer skills, such as proficiency in Microsoft Office Suite for documentation, reporting, and data analysis, as well as experience with database systems for tracking equipment status, maintaining records, and generating reports and certificates., • Experience with calibration principles, measurement uncertainty concepts, and statistical analysis of measurement data for equipment performance evaluation., • Understanding of national and international measurement standards (NIST, ISO 17025) and traceability requirements for calibration activities., • Familiar with medical device manufacturing regulatory requirements, including FDA 21 CFR Part 820, ISO 13485, and Good Manufacturing Practices (GMP)., • Knowledge of equipment qualification processes (IQ/OQ/PQ) and validation documentation requirements in regulated manufacturing environments., • Experience with metrology equipment maintenance, storage, and handling procedures to ensure measurement accuracy and equipment longevity., • Ability to read and interpret technical drawings, specifications, calibration procedures, and equipment manuals for various measuring instruments., • Problem-solving abilities to troubleshoot calibration issues, identify root causes of equipment failures, and recommend corrective actions., • Highly organized with strong attention to detail and time management skills., • Excellent written and verbal communication skills for documentation, reporting, and coordination with cross-functional teams., • Ability to work independently while following established procedures and collaborate effectively with quality, engineering, and manufacturing teams., • Associate or Bachelor's Degree in Engineering Technology, Electronics, Instrumentation, Metrology, or related technical field., • 2+ years' experience in calibration, metrology, or instrumentation, preferably in the medical device, pharmaceutical, or other regulated industry., • 2+ years of hands-on experience with precision measuring instruments and calibration equipment in a manufacturing or laboratory environment., • ASQ Calibration Technician Certification or equivalent industry certification., • NCSL International training certificates in calibration and measurement principles., • Experience with equipment qualification (IQ/OQ/PQ) processes in FDA-regulated manufacturing environments., • Knowledge of ISO 17025 laboratory accreditation requirements and measurement management systems. To conform to U.S. Government Department of Defense regulations, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Benefits: • 401(k) Safe Harbor Plan, • Healthcare Insurance: Medical, Dental and Vision, • Other Insurance: Life Insurance and Long-Term Disability (LTD) Insurance, • Time Off: Paid Time Off (PTO), Paid Sick Leave, Paid Holidays, and Paid Bereavement Leave, • Tuition Reimbursement Program, • Performance Bonus, • Flexible Schedule Salary $55,000 - $85,000 per year Privacy Policy | Critical Innovations

Job DescriptionDescriptionAs a Sr. Propulsion Design Engineer at Impulse Space you will own all aspects of propulsion component design from concept to product realization, while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. Responsibilities • Design propulsion system valves and actuators, • Own all aspects of component design from concept to product realization, • Layout complex and highly integrated fluid and mechanical systems, • Generate detailed CAD models and manufacturing drawings, • Perform fluid, thermal, and structural analysis as required, • Work with the team and external sources to procure materials, fabricate parts, and complete assemblies, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in engineering or related field, • 6+ years of experience with flight propulsion components including cryogenic, high-pressure, and high performance applications, • 6+ years of hands-on experience working with fluid, electrical and mechanical systems, • Demonstrated proficiency in CAD software with ability to learn new software tools, • Demonstrated ability in requirements definition, conceptual design, procurement, fabrication, assembly and testing of hardware Preferred Skills and Experience • Experience designing and delivering high reliability, high performance hardware, • Experience with in-space propulsion components, • Experience with Siemens NX, • Strong project management skills and effective communication of technical concepts across multi-disciplinary teams, • Experience in a startup or agile development environment Additional Requirements: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a CNC Machinist at Impulse, you will be responsible for machining & manufacturing complex components for spacecraft & rocket engine hardware. This isn't just another job; it’s an opportunity to be part of something epic. Each machined part you create plays a crucial role in our mission to push the boundaries of what’s possible. If you’re ready to go the extra mile, embrace challenges, and collaborate with a team of innovators, we want to hear from you. Join us in shaping the future; one meticulously crafted component at a time! Responsibilities • Set up, operate, and program multi-axis CNC mills and lathes (up to 5-axis) to manufacture complex aerospace components, • Perform precision inspections using an array of metrology equipment to verify dimensions and ensure adherence to drawings and tolerances, • Read and interpret blueprints, CAD drawings, GD&T, and other technical documents to complete machining operations, • Manage cutting tools in CNC machines, ensuring optimal tool load and measurement for upcoming programs, • Troubleshoot and resolve operational issues, including alarm resolutions and tooling repairs, to maintain maximum machine uptime, • Operate CNC machines in a production environment, producing both development and flight hardware while meeting quick-turn program goals, • Conduct on-machine deburring and precision cleaning of components to ensure quality and reduce human intervention, • Maintain a clean and safe work environment, adhering to company guidelines and 5S principles, • Provide continuous feedback for process improvements and efficiency opportunities to engineering and leadership, • Actively participate in preventative maintenance of CNC machines on a weekly and monthly basis, • Communicate with shop leadership regarding production challenges and collaborate with teammates to support workflow Minimum Qualifications • High school diploma or equivalency certificate, • 5+ years of experience in CNC machining, particularly with aerospace machine shops and hard metals, • Demonstrated proficiency in G-code, with strong setup and operational skills on CNC mills and lathes, • Ability to read and understand complex blueprints, GD&T, and tolerances Preferred Skills and Experience • Experience with various materials such as Inconel, titanium, stainless steel, copper, and aluminum, • 3+ years of setup experience on vertical mills, • 1+ year of experience setting up and operating 5-axis mills, • Familiarity with CNC programming using software such as NX, Solidworks HSM, Mastercam, Fusion 360 or Esprit CAD/CAM, • Experience with multiple CNC control systems, including Heidenhain, Haas, Fanuc, Siemens, and others, • Strong mechanical aptitude and understanding of tooling technology and shop math, • Excellent interpersonal skills and the ability to contribute to a team-oriented environment.Additional Information:, • Must be available to work all shifts, including overtime and weekends as needed, • Ability to lift up to 35 lbs. unassisted and stand for extended periods (8 hours minimum), • Ability to stoop, bend, crawl, and maneuver in tight spaces, • Comfort with repetitive movements and exposure to sounds and noise levels that may be distractingCompensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Avionics Mechanical Engineer at Impulse for our Avionics Team, you are responsible for the design, build, test/analysis & integration of your hardware– working with cross-functional engineering teams to accomplish this. This means cradle-to-grave ownership of mechanical designs and systems in support of Impulse’s collection of next generation advanced propulsion space vehicles. Responsibilities • Own all aspects of hardware development and execution, from concept through design, test, and launch, • Formulate the comprehensive cradle to grave Road Map for your hardware, • Navigate ambiguity to establish requirements that will ensure success at a system level, • Perform and document analysis with clear objectives to support design intent including hand calculations and FEA, • Incorporate manufacturing trades into conceptual design to explore different fabrication and assembly methods, with emphasis on DFM and DFA, • Proactively guide all aspects of your hardware’s maturity, project managing your hardware’s end users, stakeholders, and adjacent contributors to ensure all aspects of the system continue to mature together and that your assumptions are well understood outside yourself and remain valid, • Communicate effectively to ensure adjacent designs (such as vehicle, GNC, electrical, and software subsystems) are accounting for and supporting your hardware assumptions, • Conduct design reviews (CoDR, PDR, CDR) to cross-disciplinary teams to communicate the impacts of your design, and establish open risks and mitigations, • Analyze structural modes, thermal performance, and other critical aspects of avionics devices, • Produce engineering drawings with required specifications for manufacturing using GD&T, • Generate Test Plans and provide direct support to ensure successful execution of your hardware’s structural and thermal qualification and acceptance testing., • Work with internal manufacturing team and external sources to procure materials, fabricate parts, and complete assemblies, • Update designs and documentation to support continuous improvement Minimum Qualifications • Bachelor's degree in engineering or related field, • 4+ years of demonstrated experience in mechanical design, • Demonstrated proficiency in CAD software with ability to learn new tools, • Demonstrated ability in conceptual design, fabrication and testing of hardware, • Demonstrated experience working collaboratively across different teams, • Ability to communicate technical challenges, explain rationale and/or resolve concerns Preferred Skills and Experience • Masters' degree in mechanical or aerospace engineering, • 7+ years' of demonstrated mechanical design & analysis with space-flown hardware, • 4+ years' of demonstrated understanding of geometric dimensioning & tolerancing (GD&T), • 4+ years' of demonstrated experience with Finite Element Analysis (FEA), • Experience with mechanical design in challenging vibration/thermal environments, • In order to be successful in this role, you should be someone who is uniquely creative, self-driven, and is able to lead his or her own projects to completion, • Experience at a startup or agile development environment, • Experience with NX and Teamcenter Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Propulsion Development Engineer at Impulse, you will own all aspects of in-house propulsion system design, analysis, implementation and operation while working closely with a fast-paced, agile team that produces high-performance spacecraft from clean sheet designs. Impulse is developing a variety of liquid propulsion systems and looking for development engineers who can contribute to key hardware development projects. Responsibilities • Own all aspects of propulsion component and/or subsystem development, • Conduct analysis and testing to ensure that the performance and function of hardware meets intent, • Prepare, plan and execute tests including engine hotfire testing, • Work with wide-ranging teams across engineering, manufacturing and operations to deliver a reliable, high-performance and highly integrated system, • Resolve technical issues with innovative resourceful solutions, • Lead technical projects and/or a small team of engineers Minimum Qualifications • Bachelor's degree in engineering or science, • 5+ years of demonstrated experience in the aerospace propulsion field, • Prior experience working on bipropellant rocket propulsion systems, • Proficiency in basic principles of fluids, thermodynamics, heat transfer, mechanics and materials, • Ability to perform system trades ranging from thermal-fluids analyses to materials selection, • Hands-on experience working with fluid, mechanical, electrical and controls systems, • Ability to operate complex test systems including vacuum pumps and vacuum chambers, • Demonstrated ability of taking project ownership and working collaboratively with small teams Preferred Skills and Experience • Master’s degree in aerospace or mechanical engineering, • Prior experience working in lead roles on propulsion development programs, • Proficiency in CAD software with ability to learn new tools, • Experience in a startup or agile development environmentAdditional Requirements:, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionAbout Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job Summary: Epirus is a high-growth company that requires creative yet organized thinking with an eye toward building Finance Senior Associate processes and tools that scale with the company. This requires enthusiasm and energy, organized and systematic thinking, efficiency in action, attention to detail, and collegiality to work across departments and functions. He or she will have strong analytical, financial modeling, and oral and written communication skills. He or she will also be creative and adaptive in a complex growth environment and understand the importance of leading by educating others on how and why things are done. Responsibilities: • Develop corporate and project financial models and analysis to support decision-making and business planning, • Partner with company leadership to develop and update annual budgets and the company's five-year financial forecast (three-statement financial model and supporting schedules), • Evaluate corporate investment and M&A opportunities, • Assist with the development of investor marketing materials and investor engagement in future capital market activities, • Prepare monthly and quarterly financial management reports for corporate leadership and the board of directors. Reporting includes:, • Income statement, balance sheet, and statement of cash flows, • Debt and lease schedules, • Capex schedules, • Labor distribution & resourcing, • Cash flow forecasting, • Debt covenant reportingBasic Qualifications:, • Bachelor's degree (finance, accounting, economics background preferred but not required), • 2+ years of investment banking, • Strong financial modeling skills, including deep familiarity of corporate accounting, • 5+ years in investment banking, corporate finance consulting, or in-house FP&A, • Proficiency in Microsoft Excel and PowerPoint. Familiarity with other financial software and data visualization platforms is a plus, • Organized and articulate presentation skills with attention to detail, • Analytical and data-driven approach to problem solving, • Collegial and communicative approach to getting things done in a fast-moving work environment, • Financial modeling experience (financial three statements)Preferred Skills and Experience:, • U.S. Government contract, and aerospace & defense industry, experience, • Experience with multiple entity reporting structures, • Corporate consolidations, • M&A activity, • MBA or CFA valued but not required ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $94,100—$119,100 USD

Job DescriptionAbout Epirus Epirus is a high-growth technology company developing software-defined high-power microwave (HPM) systems with devastating counter-electronics effects on modern drone threats. The Epirus Leonidas HPM family of products, empowered by innovations in AI and microelectronics, is human-safe and cost-effective. Distinguishing itself from lasers, Leonidas excels against drone swarms while also bending the cost curve back in DoD's favor - taking drone defeat costs from millions of dollars per drone to pennies on the dollar. Job Summary: This is an exciting role in a growing company. We are looking for interns to join us on a 10-week internship program. This will be a hands on and in-person position. Basic Qualifications: • Pursuing a Bachelors degree in Electrical Engineering, Computer Engineering, or any related field, • Rising senior or beyond at time of internship and have a graduation date between 12/2026 - 12/2027. All applicants should be returning to school at the end of their internship to continue their academic studies., • Prior internship, collegiate project team, or laboratory experience, • Experience with Python, • Experience with electrical test equipment (Multimeters, Power Supplies, Function Generators, Oscilloscopes, Electronic Loads, etc.), • U.S. Person status is required as this position needs to access export-controlled data ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $36—$38 USD

Job DescriptionDescriptionAs a Sr. Propulsion Component Engineer, you will own all aspects of spacecraft component design from concept to product realization, while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. Responsibilities • Design propulsion system valves and actuators, • Own all aspects of component design from concept to product realization, • Generate detailed CAD models and manufacturing drawings, • Perform fluid, thermal, and structural analysis as required, • Work with the team and external sources to procure materials, fabricate parts, and complete assemblies, • Conduct rigorous component design and qualification testing, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in engineering or related field, • 5+ years of demonstrated experience in valve or component design, • Hands-on experience working with fluid, electrical and mechanical systems, • Demonstrated proficiency in CAD software with ability to learn new tools, • Demonstrated ability in requirements definition, conceptual design, procurement, fabrication, assembly and testing of hardware Preferred Skills and Experience • Experience designing and operating high reliability, high performance hardware, • Experience with on-orbit propulsion components, • Experience in a startup or agile development environment, • Strong project management skills and effective communication of technical concepts across multi-disciplinary teamsAdditional Requirements:, • Flexible schedule and willing to travel as needed *Job Title (Senior, Staff, Principal, etc.) upon hire will be dependent on level or experience and skills. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescription As a Senior Propulsion Development Engineer of Combustion Devices at Impulse, you will own all aspects of in-house combustion devices design, analysis, implementation and operation while working closely with a fast-paced, agile team that produces high-performance spacecraft from clean sheet designs. Impulse is developing a variety of liquid propulsion systems and looking for development engineers who can contribute to key hardware development projects. Responsibilities • Own all aspects of combustion devices development, including igniters, preburners, main injectors, or thrust chambers, • Conduct analysis and testing to ensure that combustion devices achieve performance and reliability targets, • Prepare, plan and execute combustion tests including engine hotfire testing, • Work with wide-ranging teams across engineering, manufacturing and operations to deliver a reliable, high-performance and highly integrated system, • Resolve technical issues with innovative resourceful solutions, • Bachelor's degree in engineering or science, • 5+ years of demonstrated experience in the aerospace propulsion field, • Prior experience developing bipropellant rocket injectors or thruster chambers, • Ability to perform system trades ranging from thermal-fluids analyses to materials selection, • Hands-on experience working with fluid, mechanical, and/or electrical ignition systems, • Master’s degree in aerospace or mechanical engineering, • Prior experience working in lead roles on propulsion development programs, • Proficiency in CAD software with ability to learn new tools, • Proficiency in basic operating principles of injector design including high-pressure and oxidizer-rich combustion devices, • Experience in a startup or agile development environment Additional Requirements:, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Avionics Test Engineer, you will develop and run tests for all kinds of flight electrical devices, from individual circuit boards to entire vehicles. You will develop, build, and maintain test systems to support hardware from development to production. You will work directly with avionics hardware engineers, propulsion engineers, GNC engineers, production engineers, production technicians, and others. You will have the opportunity to contribute to all the stages of spacecraft development, from initial concepts to on-orbit operations. Responsibilities • Own test systems from start to finish. Determine the best way to meet requirements, specify and purchase hardware, automate your hardware, fix problems, and own the results., • Test electrical devices to ensure they’re suitable for flight. Work with Responsible Engineers and designers to identify test cases, select or design the necessary signal conditioning circuits and measurement equipment, develop test sequences, identify problems, and help fix them., • Learn about, design, and build dedicated test setups for specialized devices like optical or motorized assemblies., • Provide feedback to design engineers to improve Impulse’s overall avionics ecosystem., • Bachelor’s degree in any relevant engineering field, • 5+ years of demonstrated experience testing electrical systems, • Experience designing and owning test systems from concept to implementation, • Experience executing tests to support product development and prototyping, • Comfortable working with design engineers to anticipate and derive test requirements for under-defined systems, • 5+ years of demonstrated experience working on a vehicle project of any kind (spacecraft, rocket, car, boat, plane, drone, etc.), • Experience designing test stands and/or hardware racks, • Experience designing tests for a production environment, • Experience working with NI hardware (cRIO, cDAQ etc.), • Experience safely operating hazardous systems (high voltage, high pressure, etc.), • Experience with vibe tables, thermal chambers, or other aerospace test equipment, • Familiarity with spacecraft systems and test campaigns Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Supplier Quality Engineer at Impulse, you will be responsible for ensuring the quality and performance of components and materials from our suppliers. You will work closely with cross-functional teams to uphold high standards throughout the product lifecycle. In this role, you’ll leverage your technical expertise and problem-solving skills to drive continuous improvement, resolve quality issues, and optimize supplier relationships. Responsibilities • Manage the issue ticket landscape related to vendor performance and prescribe specific actions to improve quality, eliminate recurring non-conformances, and mitigate supply chain risks, • Qualify parts and oversee the manufacturing process with vendors, • Review and assess supplier manufacturing processes and quality systems, including new supplier onboarding and audit evaluations, • Own and manage non-conformances identified at vendors (Supplier Deviation Requests) and during production. Partner with vendors to implement new processes or actions that reduce recurring issues and mitigate supply chain risks, • Drive improvements in existing quality management processes while collaborating with vendors to enhance their performance, • Manage containment, receiving, and precision inspection non-conformances, and develop resolutions for existing issues. Identify and implement improvements to reduce the overall issue ticket landscape, • Foster improvements within the supply base to create a more stable and reliable supply chain., • Provide technical support onsite at suppliers to ensure part reliability, • Collaborate closely with Engineering, Procurement, and Production teams to ensure that high-quality parts and services meet all requirements, • Analyze quality metrics to identify trends and root causes of systemic issues, • Execute non-conformance management processes, including SDR, MRB, RTV, CAPA, and Production Issue Ticket reviews, • Support containment actions related to non-conforming products, including identifying product locations, coordinating with Supply Chain Reliability Engineers to mitigate flight risks, and conducting root cause analysis Minimum Qualifications • 2+ years of experience in an engineering, supply chain, manufacturing, or quality-related field, or a Bachelor's degree in Engineering, Supply Chain, or a related discipline, • Experience with Lean, Six Sigma, or other continuous improvement methodologies, • Knowledge of component manufacturing processes, quality standards, and certifications (e.g., AS9100, ISO 9001), • Ability to read and interpret technical drawings and specifications, • 4+ years of experience in Supplier Quality Engineering or a similar role within the aerospace, manufacturing, or a related industry, • Strong understanding of quality management systems (QMS), supplier audits, and non-conformance management processes (SDR, MRB, CAPA, RTV), • Strong problem-solving abilities with a proven track record of driving root cause analysis and implementing corrective actions, • Excellent communication and interpersonal skills, with the ability to collaborate effectively across teams and with suppliers, • Experience using quality management tools and software (e.g., Minitab, SAP, or similar ERP systems), • Proficiency with data analysis tools such as Excel, Power BI, or other analytics platforms Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionAbout Epirus Epirus is a high-growth technology company developing software-defined high-power microwave (HPM) systems with devastating counter-electronics effects on modern drone threats. The Epirus Leonidas HPM family of products, empowered by innovations in AI and microelectronics, is human-safe and cost-effective. Distinguishing itself from lasers, Leonidas excels against drone swarms while also bending the cost curve back in DoD's favor - taking drone defeat costs from millions of dollars per drone to pennies on the dollar. Job Summary: This is an exciting role in a growing company. We are looking for interns to join us on a 10-week internship program. This will be a hands on and in-person position. Basic Qualifications: • Pursuing a Bachelors degree in Mechanical Engineering, or any related field, • Rising senior or beyond at time of internship and have a graduation date between 12/2026 - 12/2027. All applicants should be returning to school at the end of their internship to continue their academic studies., • Prior internship, collegiate project team, or laboratory experience, • CAD experience (any platform), • U.S. Person status is required as this position needs to access export-controlled data ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $36—$38 USD

Job DescriptionDescriptionAs a Vehicle Engineering Intern, you will work on spacecraft development projects while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. This internship will run from May to August 2026. Responsibilities • Support our Vehicle Engineering team through the design and build of primary structures, tanks, supporting structures, mechanisms, and thermal management systems, • Support the design, analysis, and/or manufacturing of critical spacecraft hardware and testing equipment, • Work directly with other design and manufacturing engineers to produce and test hardware, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Completion or working towards a degree in engineering or science, • Ability to take project ownership and work well in a small team, • Demonstrated proficiency in basic principles of mechanics and materials, heat transfer, thermodynamics, and fluids Preferred Skills and Experience • Hands-on experience working with mechanical systems, • Demonstrated experience getting a hardware project through the design, build, test phase, • Familiarity with CAD software and ability to learn new tools, • Familiarity with analysis programming such as MATLAB, Excel, etc. Additional Requirements:, • Willing and able to work on-site in Redondo Beach, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an Automation & Controls Engineering Intern, you will work on all aspects of propulsion test equipment while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. Responsibilities • Design and build fluid, mechanical and electrical test systems in support of liquid rocket propulsion and spacecraft systems testing, • Collaborate with wide ranging teams across the company, including Redondo Beach and Mojave., • Perform test setup, hardware inspections, checkouts and troubleshooting as needed, • Recent completion or working towards Bachelor’s degree in Engineering or Science or related field, • Demonstrated ability to take project ownership and work well in a small team, • Demonstrated hands-on experience working with fluid or mechanical systems Preferred Skills and Experience • Working knowledge of components (valves, regulators, sensors, power supplies) and hands-on skills (tube fabrication, metalworking, wiring), • Prior experience working with pneumatic, hydraulic or electromechanical test equipment, • Prior experience in propulsion development and/or testing Additional Requirements, • Willing and able to work on-site in Redondo Beach, CA or Mojave, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Test Automation Engineer at Impulse Space, you will own all aspects of test and automation software design, implementation and operation while working closely with a fast paced, agile team. Key Responsibilities • Work on a full spectrum of software, including near-real time data acquisition and control software to user-facing GUI’s and tools., • Actively work with the operations team that uses your software daily to support testing operations., • Take part in the complete software lifecycle including design, integration, testing, deployment, debugging, and finding novel solutions to late-breaking changes or issues, • Work onsite in a fast-paced, challenging environment, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in engineering, computer science or related field, • 3+ years' of demonstrated proficiency with a programming language & demonstrated hands-on experience operating the software, • Experience developing user-facing software applications related to networking, hardware control and data acquisition, • Expertise in program design and best practices, • Proficient with basic principles of data acquisition and control, • Master’s degree in electrical, software, mechanical, or aerospace engineering, • Hands-on experience with debugging electrical systems, • Experience with networking, and interfacing with IT departments, • Experience with C, C++, Rust, and/or LabVIEW, • LabVIEW certification (CLAD, CLD, CLA), • Experience in a startup or agile development environmentAdditional Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Propulsion Component Engineer you will own all aspects of spacecraft component design from concept to product realization, while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. Responsibilities • Own all aspects of component design from concept to product realization, • Generate detailed CAD models and manufacturing drawings, • Perform fluid, thermal, and structural analysis as required, • Work with the team and external sources to procure materials, fabricate parts, and complete assemblies, • Provide technical support for test operations, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in engineering or science, • 3+ years of experience in valve or component design, • Hands-on experience working with fluid and mechanical systems, • Proficiency in CAD software with ability to learn new tools, • Capable of performing structural and thermal analysis in support of design, • Demonstrated ability in requirements definition, conceptual design, procurement, fabrication, assembly and testing of hardware Preferred Skills and Experience • Experience designing and operating high reliability, high performance hardware, • Experience with on-orbit propulsion components, • Experience in a startup or agile development environmentAdditional Requirements, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Production Planner (Avionics) at Impulse, you are responsible for serving as a liaison between all ancillary input and output organizations to ensure that components and assemblies flow smoothly through the production areas to meet stringent deadlines and quality standards. Responsibilities • Manage consignment of Printed Circuit Board Assemblies (PCBA), • Kit consignment work orders in preparation for shipments, • Coordinate and prepare shipments to ensure minimal damage to PCBA’s in transit, • Receive, verify, and reconcile PCBA’s against shipment documentation, • Support in the management of Avionics inventory, • Create and fulfill inventory requests based on demand and production schedule, • Interface with supply chain, engineers, and technicians on the release of work orders, • Support production and inventory personnel with “return to stock”, replacement parts, and inventory purge actions, • Reconciliation of work order bill of material quantities, • Monitor, track, and move parts as required through the company to ensure timely delivery to next production location, • Push/pull physical movement of parts through receiving inspection, stock areas, purchasing, production resources or any applicable work center, • Communicate part status and estimated completion dates to leadership upon request, • Support management of material certifications as required to prevent the use of uncertified materials, • Verify all material received for conformity with accompanying paperwork, checking for damage, correct part numbers, quantity, and revisions prior to release of work orders to production, • Create and improve systems used to keep components organized, • Work with the planning, procurement, engineering, and production teams to ensure our MRP/ERP data is and remains clean and accurate, • Ensure parts are handled and protected properly and within specifications, • Assist with resolution of incorrect system data which is driving inappropriate demand, schedules, or could result in general failure, • Support team members to meet rate and quality targets at each workstation, and promote continuous flow by communicating blockers and reporting downtime to supervisors and specialists, • Develop and maintain reports to highlight needs, deliverables, and constraints as required, • Assist production leadership and project teams with action item updates, • Support projects or productivity development activities within the manufacturing team, • Update and utilize metrics to drive results as applicable with production personnel, • Experience working in ESD environments is highly desirable, • 5+ years of logistics experience in space, electronics, automotive, or other high-volume manufacturing, • Excellent computer skills (Email, Microsoft Windows, ERP/MRP/MES systems, iOS, Executing Custom Developed Software), • Proficiency of MRP/ERP systems, • Experience in aerospace, automotive, electronic manufacturing environment, • Experience with SQL, python or programming, • Bachelor’s degree or equivalent Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Licensed Customs Broker – Entry & Regulatory Compliance We are seeking a Licensed U.S. Customs Broker with 10+ years of experience in customs brokerage, entry processing, and regulatory compliance. The ideal candidate will oversee the entry process and provide expert regulatory services to ensure compliance with CBP and partner government agencies. Qualifications: * Active U.S. Customs Broker License * 10+ years experience in customs brokerage & regulatory compliance * Strong knowledge of HTSUS, CBP rulings, Section 301/232 tariffs, and PGA requirements * Proven experience handling complex entry filings and compliance cases * Bilingual in Korean/English preferred Company DescriptionDK Express Inc is a licensed customs brokerage firm. We clear customs and other government agencies and arrange international and domestic shipping.DK Express Inc is a licensed customs brokerage firm.\r\nWe clear customs and other government agencies and arrange international and domestic shipping.

Job DescriptionDescriptionAs Associate General Counsel, Government and Regulatory Affairs, at Impulse, you are an integral part of our Legal team responsible for identifying and managing risks across the across the organization to ensure the Company is adequately protected through its growth stages. Your core responsibilities will be to negotiate and ensure compliance with government contracts, manage spacecraft regulatory licensing filings and prosecution, and to oversee the Company’s trade compliance program. NOTE: This position is on-site (DC or LA) Responsibilities • Provide expert legal advice on government contracting processes, including FAR and DFARS regulations, and represent the company in government-related negotiations and disputes. This includes direct involvement in the negotiation of federal government proposals, RPFs and government contracting agreements, ensuring that all terms and conditions align with the Company’s posture, • Oversee all aspects of the company’s compliance policies and procedures for government contracting and regulatory matters, ensuring the company’s adherence to applicable laws and regulations. This includes overseeing the Company’s trade compliance program, including jurisdiction and classification analysis, export control, and Technology Control Plans (TCP). The Dir. of Trade Compliance would report into this position, • Manage spacecraft regulatory licensing filings and approvals with government agencies, including the FCC, NOAA, and FAA, ensuring compliance with applicable domestic and international regulations, • Keeping proactively informed on applicable laws, regulations, and industry guidance that impact our Company’s core spacecraft product lines, • Monitor and advise on regulatory changes affecting government contracts and space regulatory requirements, ensuring that internal stakeholders are aware and prepared for changes., • Respond promptly to legal requests and questions from the business and other stakeholders, including at the executive level, summarizing, and communicating regulatory requirements in a clear, concise, succinct and business friendly way Minimum Qualifications • J.D. from an accredited legal program and member of the California bar in good standing, • 8+ years of total experience supporting defense or aerospace regulatory matters, • 2+ years of in-house experience, • Pragmatic, business mindset, • A demonstrated record of success focusing on government and regulatory compliance, • Track record of effectively navigating opportunities, headwinds, and strategic shifts that are common in an early-stage business Preferred Skills and Experience • Experience negotiating and/or overseeing a complete government contracting lifecycle, • Experience managing export compliance and approval of export authorizations, ideally as an empowered official as part of a company’s trade compliance program, • Experience working in or with the aerospace and/or the automotive industryAdditional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description The Mission At GRAM, we believe the next great leap for humanity will be physical, not digital. What AGI is to bits, Self-Replication (SR) is to atoms. As an SR research and deployment company, our mission is to make humanity galactic by enabling physical exponential growth. To achieve this, we are conducting foundational research across general-purpose robotics, artificial intelligence, biology, and materials science to enable SR within our lifetimes. Our first step is to challenge the consensus that robots should look like us. We believe true progress comes from optimizing for function over form. We are creating a new embodiment for intelligence, designed from first principles to build the future physical economy, on and off-world. The Role At GRAM, we believe that operational excellence is a core strategic advantage. Our ability to execute on an ambitious, multi-decade mission depends on a world-class foundation of operational and business systems. This role is for the leaders who build the machine that builds the machine, creating an environment where our scientists and engineers can do their best work. You are a builder of companies, not just products. You will be responsible for creating the scalable, efficient, and robust systems that enable our team to move faster and achieve more. This is an opportunity to design a company's operating system from first principles, ensuring that our physical lab, our supply chain, and our business functions are as thoughtfully engineered as our robots. This is not a traditional finance position. It is the role of the lead architect of the economic and capital framework that will underpin our long-term industrial growth. The Head of Capital will operate at the intersection of international finance, industrial strategy, and technology, with the primary mandate to build a resilient and sophisticated capital engine worthy of our generational ambition. Key Responsibilities: • Develop and lead the company's comprehensive capital strategy, building a diverse portfolio of financial instruments that extends beyond traditional venture capital to include international project finance, non-dilutive government R&D contracts, and strategic partnerships., • Lead the financial modeling and strategic economic planning for GRAM's most ambitious future projects, including our "GAIA" industrial intelligence platform and the novel unit economics of self-replicating systems., • Cultivate and manage relationships at the highest levels with strategic capital partners, including sovereign wealth funds, international development banks, and the private capital arms of global industrial conglomerates., • A decade or more of experience operating at the highest levels of project finance, corporate strategy, international law, or private equity., • A proven track record of structuring and executing novel, complex, multi-billion-dollar deals (e.g., infrastructure projects, joint ventures, sovereign investments)., • A deep, intuitive understanding of global capital markets and the mechanics of industrial economics., • The ability to command respect and build trusted relationships with the world's leading financial and industrial decision-makers.Preferred Qualifications:, • Experience building a new financial or corporate structure from zero to significant scale., • A history of negotiating directly with state-level actors or sovereign entities., • A fundamental understanding of how technology and geopolitical trends intersect to create new economic opportunities. This is an on-site role at our research lab in El Segundo, California. We offer significant relocation assistance for exceptional candidates. Interview Process After submitting your application, we review your portfolio and any exceptional work you've shipped. If your application demonstrates the caliber we seek, you'll enter our interview process, which is designed for speed and substance. We aim to complete it within one week from start to finish. Compensation Your total compensation reflects both the significance of early-stage equity and competitive market rates. The following is the general framework for all roles at GRAM. • Company-Wide Base Salary Range: $75,000 - $300,000 USD, calibrated to your impact potential, • Equity: Substantial ownership stake befitting founding team members Why Join? We are an early, focused team of scientists and engineers building the system that builds itself. GRAM is funded by leading investors and long-term visionaries. We operate without bureaucracy. Ownership and leadership flow to those who demonstrate exceptional capability, and every team member works directly on our core technology. We are based in El Segundo, the heart of America's industrial future, focused on solving one of the most important problems of our time.

Job DescriptionDescriptionAs a Manufacturing Engineering Intern, you will work across different aspects of manufacturing and assembling spacecraft avionics taking them from development test articles to high volume production, while working alongside a fast-paced, agile team. The internship will run from May to August of 2026. Responsibilities • Support the Avionics Manufacturing Engineering team to develop and continuously improve manufacturing processes for space-grade components and vehicles, • Develop and optimize processes for fabricating parts, such as harnessing, PCBAs, opto-mechanical assemblies, solar arrays, RF components, etc., • Create efficient and reliable assembly and inspection processes, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Completion or working towards a degree in engineering or science, • Ability to take project ownership and work well in a small team, • Good grasp of fundamentals of either electrical, mechanical or optical engineering., • Hands-on experience with product or process improvements, • Familiarity with CAD software and ability to learn new software tools Additional Requirements:, • Willing and able to work on-site in Redondo Beach, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an Avionics Engineering Intern your core responsibility will be to design, manufacture, and test custom circuit boards and other end devices. You will work with software engineers, propulsion engineers, and others. You will have the opportunity to contribute to various aspects of spacecraft electronics development, including PCB schematic/layout, bench testing, and manufacturing. This internship will run from May to August 2026. Responsibilities • Do schematics, layout, and manufacturing for test and/or flight products, • Bring up new circuit boards, run tests on them, and deploy them to where they’re needed, • Work with engineers from other departments to test how avionics devices interact with fluids and propulsion devices, • Do simulation and analysis of circuits and systems Minimum Qualifications • Currently enrolled in a bachelor’s or master’s program in Electrical Engineering or related field, • Experience making your own PCBAs, • Experience troubleshooting electronics problems at the board level or system level, • Ability to communicate technical challenges, explain rationale and/or resolve concerns Preferred Skills and Experience • Experience with batteries, solar arrays, motors, harnessing, sense elements, or other non-PCBA electrical devices, • Experience working collaboratively on a team with a mix of hardware and software engineers, • Experience working in a vehicle development environment (cars, planes, rockets, satellites, drones, boats, etc), • Experience with Altium Designer Additional Requirements: • Willing and able to work on-site in Redondo Beach, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.