International government jobs in Norfolk, VirginiaCreate job alerts

Job Description At Credence, we support our clients’ mission-critical needs, powered by technology. We provide cutting-edge solutions, including AI/ML, secure cloud, digital transformation, and advanced intelligence capabilities, to the largest defense, health, and international development federal organizations. Through partnership and trust, we increase mission success for warfighters and secure our nation for a better future. We are privately held, are repeatedly recognized as a top place to work, and have been on the Inc. 5000 Fastest Growing Private Companies list for the last 12 years. We practice servant leadership and believe that by focusing on the success of our clients, team members, and partners, we all achieve greater success. Credence has an immediate need for a System Engineer to provide engineering level support for the engineering and sustainment of navigation systems and sensors installed on USCG afloat assets Responsibilities: The System Engineer shall provide expertise in the areas of Systems Engineering Lifecycle (SELC) process and shipboard systems integration support for a myriad of electronic navigation systems and sensors. Manage, coordinate, supervise, support, or perform project and technical writing activities related to all aspects of an engineering project. May provide support in the areas of leadership, development, presentation or overseeing development of system requirements, design, documentation, algorithms, software implementation, hardware layout, integration, installation, analysis, and peripheral interfaces. Generates, or oversees generation of, test and evaluation plans, and executes those plans when necessary. Exercises independent judgment, as well as a high level of analytical skill, in solving complex and unusual technical, administrative, and managerial problems. These services support the U.S. Coast Guard’s over-arching life-cycle requirement for C5I systems aboard all Coast Guard cutters and boats. Requirements • Must possess an active Secret clearance, • Education Associate Degree in Engineering or completion of USCG or DOD Technical Schools., • Education and USCG/DOD Training may be substituted as follows:, • Comprehensive knowledge of DOD military specifications and standards. Demonstrated Expert: Seven (7) years of concurrent, relevant experience in engineering, design, maintenance and installation of Command, Control and Communication Systems., • Demonstrated Subject Matter Expert (SME) equates to four (4) years’ experience, including both shipboard and shore station, with four (4) of the following equipment/systems/programs or like systems:, • Automatic Direction Finder (ADF), Doppler Speed Log (DSL), Encrypted Automatic Identification System (EAIS), Electronic Chart Display and Information System (ECDIS), Electronic Chart System (ECS), VEGA, Electronic Navigation System (ENS), andScalable Integrated Navigation System (SINS), and their integration with Machinery Plant Control and Monitoring Systems (MPCMS), Dynamic Positioning Systems (DPS), Automatic Identification System (AIS), and Track Controller/Autopilot systems., • Applied knowledge of the DHS/USCG C5ISC Systems Engineering Lifecycle (SELC) process or similar engineering process., • Ability to development, deliver, and present SELC System Technical Engineering Reviews (SETR)., • Applied knowledge of the Surface Forces Logistics Center (SFLC) Engineering Change (EC), Time Compliant Technical Order (TCTO) process., • SME level System Sustainment and System Development support throughout the lifecycle of multiple electronic navigation systems and sensors., • Lifecycle risk identification and mitigation strategies., • Develop and deliver Commercial Off-the-Shelf (COTS) or Government Off-the-Shelf (GOTS) integration and engineering design solutions., • Develop and deliver engineering lifecycle related artifacts and activities in support of applicable systems., • Conduct hardware and software light off, testing, evaluation, and resolve system issues as required., • Coordinate and oversee First Article Test (FAT) and Engineering Test Assist efforts, in field and laboratory environments., • Ability to develop, review, or direct the development of documentation necessary to complete a EC/TCTO; documentation includes technical drawings, wiring details, engineering change, Time Critical Maintenance Action (TCMA), System Operation and Verification Test (SOVT) test procedures, Test and Evaluation (TEV) test plans and procedures, and maintenance., • Provide technical guidance and oversight to Installation Activities (IA) during system testing, prototype, and/or production events., • Provide on-site, phone, and email support for the purpose of technical corrective maintenance to resolve system casualties during prototype phase., • Expert level knowledge of shipboard electronic system installation and integration process and applicable Government standards., • Expert level knowledge of troubleshooting and corrective maintenance involving complex electronic navigation systems., • Expert knowledge of the Microsoft Office suite of applications to draft reports, emails, presentations, create system architecture and integration diagrams, and possess a thorough knowledge of performing independent research. Please join us, and together, we can build a better world powered by AI/ML, Data Fusion, Analytics, and Cloud technologies!

Job Description Overview Tradesmen International is immediately hiring experienced First Class Machinists for projects located in and around Newport News, VA. This is a full time opportunity with a pay range of up to $27.31/hour based on experience plus $140/Per Diem to Travelers 60+ miles from the job site. If you are a First Class Machinist and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: * Install, align, and test main propulsion plant machinery and support systems * Overhaul and maintain valves, pumps, turbines, and heat exchangers * Perform boiler operations, hydrostatic testing, and lube oil flushing * Read and interpret complex blueprints, schematics, and technical drawings * Install and test systems such as: * Anchor windlass, aircraft/weapon elevators, hydraulic systems * Steam plant, AC & refrigeration units, distilling plant systems * Operate machine tools: lathes, boring bars, portable milling/drilling machines * Use precision measuring tools (micrometers, dial indicators, etc.) for alignment and fit * Conduct system grooming and ensure cleanliness to shipyard standards * Comply with OSHA and shipyard safety regulations * Support installation of additional systems such as: * Condenser tubes, winches, ballast tanks, arresting gear, diesel systems, and more Requirements: * * DOD clearance required * Minimum 4 years of commercial/naval experience as a First-Class Machinist * Strong technical knowledge of mechanical, steam, and hydraulic systems * Familiarity with OSHA safety standards related to shipbuilding * Ability to work from complex technical drawings and schematics * Experience in the use of precision measuring tools and alignment procedures Preferred: * * * Experience with: * ALRE systems, steam valves, sea valves, and pump/motor alignment * Boiler tube replacements and steam turbine installation * System optical alignment and cleanliness inspections * Ability to operate and maintain watertight compartments and noise equipment * Knowledge of air and fuel systems, shipboard HVAC, and AC/refrigeration components * Comfortable working independently or as part of a team on high-spec government projects Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job DescriptionPartner Attorney – Norfolk, VA Our client, a prestigious multi-service law firm with nearly a century of trusted legal excellence is seeking& experienced Partner-level Attorneys to join its growing team in Norfolk, VA. This is an exceptional opportunity for entrepreneurial attorneys who want transparent compensation, true independence, and the support of a collaborative, full-service platform. About the Firm For almost 100 years, this Norfolk-based firm has represented individuals, government agencies, and businesses across diverse practice areas. The team delivers superior, efficient, and value-driven legal services to local, national, and international clients. Practice strengths include: * Litigation * Construction law * Government contracts * Mergers acquisitions * Project finance * Creditor’s rights * Data privacy security * And other key business-focused practice areas The firm is committed to innovation, collaboration, and high-level service for every client. What We’re Looking For Ideal candidates bring: * An entrepreneurial mindset * A commitment to exceptional client service * A collaborative, team-first approach * The desire to set fair billable rates that maximize value for clients * An established book of business with room to grow Requirements Qualified Partner candidates must have: * 7+ years of legal practice (all practice areas will be considered) * A portable book of business of $400K or more * A degree from an ABA-accredited law school * An active license to practice law * The ability to work independently and in team-oriented environments What Attorneys Enjoy Attorneys at this Norfolk, VA firm benefit from a modern, supportive structure designed for long-term success: * Transparent and objective compensation model (Earn a higher percentage of what you produce) * Ability to set reasonable client rates * No minimum billable hour requirement * Full administrative and legal support * Marketing support, including website promotion * Cross-selling opportunities across diverse practice groups * Full benefits package * Remote and in-office work options for flexibility * Recruiting bonuses * Educational, affinity group, and community service initiatives Working Here The firm’s culture allows driven attorneys to build their practice their way. With a flexible structure, no minimum billable hour expectations, and collaborative practice groups, attorneys can shape meaningful client relationships and strong financial outcomes. Diversity, Equity Inclusion The firm believes that diversity enriches legal perspectives and strengthens advocacy. Its DEI commitment is reflected in recruiting, professional development, and firm culture. Every attorney—from every background—receives the opportunity to thrive, grow, and lead.

Job Description Exploitation Analyst – Top Secret Clearance | Norfolk, VA Cambridge International Systems, Inc. Join a dynamic global team united by shared values: commitment, integrity, and perseverance. At Cambridge, you’ll work alongside top talent worldwide, tackling some of today’s most complex and critical challenges in defense and security. We are currently seeking an Exploitation Analyst to support operations in Norfolk, VA. This is a full-time position requiring an active DoD TS clearance. This position is contingent upon contract award with an expected award date of January 2026. What You’ll Do • Lead cyber test planning and execution support as a subject matter expert (SME) in cyberspace operations., • Analyze system architecture and documentation to identify test entry points and develop red team objectives., • Coordinate closely with red team operators and government stakeholders to ensure test objectives are achievable, traceable, and clearly defined., • Conduct and lead cyber OT&E-related test events, including cooperative vulnerability and adversarial assessments., • Support the Cyber Survivability Test Planning Course and help update training materials, templates, and SOPs., • Ensure pre-test, execution, and post-test planning documentation is accurate and aligned to OPTEVFOR policy., • Develop comprehensive test plans, in-briefs, daily hotwashes, and final deliverables including data analysis summaries., • Participate in and support working groups, technical exchanges, and OT&E meetings as assigned. Required Qualifications: Education & Experience: • Bachelor’s degree in computer science, cybersecurity, or related technical degree OR minimum 5 years’ experience in DoD defensive or offensive cyberspace operations planning or exploitation analysis Technical Expertise:, • Demonstrated ability to reverse engineer, exploit, or emulate real-world cyber threats across networked and embedded systems., • Familiarity with cyber survivability concepts, test resource planning, and system vulnerability evaluation. Proficiency in Microsoft Office Applications (MS Visio, Project, Excel, PowerPoint etc.) * Ability to perform detail-oriented work quality assurance/quality control prior to delivery to the government. • Excellent written and oral communications skills to support briefing senior leadership (O6/GS-15 or higher) Certifications: Must have a current and active DoD TS security clearance with the ability to obtain a SCI clearance. * Proficient with modern IT tools and infrastructure technologies Preferred (Nice to Have): • Familiarity with DoD cyber OT&E policy, procedures, and Red Team test integration., • Proficiency with exploitation frameworks and vulnerability assessment tools (e.g., Metasploit, Cobalt Strike)., • Hands on experience performing vulnerability research or developing proof-of-concept exploits., • Knowledge of threat vectors, vulnerability exploitation strategies, and mission risk evaluation., • Understanding of DCWF Work Role 121 responsibilities and cybersecurity assessment workflows., • Experience leading validation or exploitation events under RMF/NIST 800-53 security frameworks., • Knowledge of virtualized, cloud-based systems, network protocols, firewalls, and perimeter defense. Some overnight stays possible. Work Environment * Compliance with vaccination and medical requirements for TDY/OCONUS roles as per Vaccine Recommendations by AOR | Health.mil. Office setting: * Primarily an office-based role in Norfolk, VA * Standard desk/computer work with flexibility for walking and movement on site * Must be able to work in an office environment, sitting at a desk, looking at a computer for most of the workday. * Work is physically comfortable; the employee has discretion about sitting, walking, standing, etc. * May be required to travel short distances to offices/conference rooms and buildings on site. Background & Security * Employment is contingent upon successful background investigation * Drug screening may be required for federal contract compliance Benefits & Perks We believe in investing in our team—both professionally and personally: * Medical, dental, vision, life, accident, and critical illness insurance * 401(k) immediate vesting and match * Paid time off and company holidays * Generous tuition & training support * Relocation assistance * Sign-on and performance-based bonuses * Employee referral program * Access to Tickets at Work, EAP, wellness initiatives, and more Join Us If you're driven by mission, technology, and teamwork—we want to hear from you. Cambridge is growing, and this position is just one of many opportunities on our global team. Know someone perfect for the role? Referrals are welcome—both employees and non-employees may qualify for a bonus. Apply today and help shape the future of secure cloud computing for national security. About Cambridge International Systems At Cambridge, innovation grows through diversity. We are proud to be an equal opportunity employer, committed to creating an inclusive and supportive work environment for all. Learn more at . Powered by JazzHR DhSewWJfYS

Job Description * POSITION IS HYBRID IN CHESAPEAKE, VA * Job Summary The Payroll Manager is responsible for overseeing payroll staff. Their duties include hiring and training Payroll Specialists, coordinating with the finance and HR departments to process payroll for new employees or monitor payroll schedules and managing employee payroll earnings and deductions. As with any position, additional expectations exist. Some of these include, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with assigned supervisor(s), staying focused on the assigned tasks, and completing other tasks as assigned. Responsibilities • Review and approval of payroll processing runs and ability to independently prepare payroll processing when needed, • Reconciliation of payroll to quarterly payroll tax reports; strong working knowledge of payroll tax forms, • Maintains payroll information by designing systems; directing the collection, calculation, and entering of data, • Updates payroll records by reviewing and approving changes in exemptions, insurance coverage, savings deductions, and job titles, and department/ division transfers, • Pays employees by directing the production and issuance of paychecks or electronic transfers to bank accounts, • Prepares reports by compiling summaries of earnings, taxes, deductions, leave, disability, and nontaxable wages, • Determines payroll liabilities by approving the calculation of employee federal and state income and social security taxes, and employer’s social security, unemployment, and workers compensation payments, • Balances the payroll accounts by resolving payroll discrepancies, • Provides payroll information by answering questions and requests, • Maintains payroll guidelines by writing and updating policies and procedures, • Complies with federal, state, and local legal requirements by studying existing and new legislation; enforcing adherence to requirements; advising management on needed actions, • Maintains employee confidence and protects payroll operations by keeping information confidential, • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies, • Completes operational requirements by scheduling and assigning employees; following up on work results, • Maintains payroll staff by recruiting, selecting, orienting, and training employees, • Maintains payroll staff job results by counseling and disciplining employees; planning, monitoring, and appraising job results, • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies, • Contributes to team effort by accomplishing related results as needed, • Bachelor’s Degree in Finance, Business, or other related fields, • 2+ years’ experience supervising a payroll department, • 6+ years’ overseeing end-to-end multi-state payroll processing, • Proven experience managing payroll processes, staff, compliance reporting, and tax filing, • 2+ years’ working with JAMIS software or similar DCAA compliant software, • Master’s Degree in related field, • CPP, FPC, CPA or similar certification, • 4+ years’ experience supervising a payroll department, • Proven experience with compensation and wage structure, benefits administration, worker compensation, employment law, and accounting skills, • Proven experience processing international payroll and tax filing Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job Description Apogee Solutions, a Woman-Owned Small Business, is seeking a Cybersecurity Manager to support our corporate Cybersecurity Maturity Model Certification (CMMC) program in Chesapeake, VA. Qualified candidates must be a U.S. Citizen capable of receiving a DOD Top Secret clearance. The Cybersecurity Manager is responsible for managing, administering, and coordinating Apogee Solutions’ CMMC Cybersecurity Program. Apogee Solutions has achieved a CMMC Level 2 Certification via assessment by a Certified Third-Party Assessment Organization (C3PAO). This role is critical in ensuring the security of Controlled Unclassified Information (CUI), Federal Contract Information (FCI), Covered Defense Information (CDI), Controlled Technical Information (CTI), and International Traffic in Arms Regulations (ITAR) Data, safeguarding Apogee Solutions’ Department of Defense (DoD) portfolio. The Cybersecurity Manager will be responsible for developing, implementing, and managing a secure and compliant enclave for CUI, FCI, CDI, CTI, and ITAR data, ensuring adherence to federal cybersecurity regulations. The Cybersecurity Manager will: • Oversee the CMMC compliance program, including gap analysis, certification, and continuous monitoring., • Maintain cybersecurity posture at Cybersecurity Maturity Model Certification (CMMC) Level 2 with all 110 security controls across 14 domains., • Ensure full incorporation of cybersecurity standards in accordance with DFARS 252.204-7021, Cybersecurity Maturity Model Certification Requirements, • Maintain cybersecurity compliance with National Institutes of Standards (NIST) Special Publication (SP) 800-171, Protecting Controlled Unclassified Information in Nonfederal Systems and Organizations., and NIST SP 800-173, Information Security Continuous Monitoring (ISCM) for Federal Information Systems and Organizations., • Ensure compliance management, continuous monitoring, and facilitating projects to drive long-term evolution of security environment., • Oversee the lifecycle management of the full CMMC program, including developing and maintaining essential documentation, including the System Security Plan (SSP) and mitigation and reporting of security/cyber related incidents., • Create, implement, and maintain company-wide security policies and procedures that translate CMMC requirements into actionable practices., • Manage and lead the response for all internal and external CMMC audits and assessments by preparing for and conducting cybersecurity readiness inspection, self-inspections, and audits., • Oversee management of IT security policies as related to IT solutions and configuration., • Conduct risk assessments and oversee the vulnerability management lifecycle for the CUI, FCI, CDI, CTI, and ITAR environments., • Regularly conduct internal audits to assess the effectiveness of security controls and provide reports and briefings on program status, risks, and milestones to company leadership., • Nurture external and internal customer relationships, developing cyber security and information security programs, and deliver high quality site and systems security plans., • Provide key security support to geographically dispersed company employees., • As needed, design and develop Information Assurance (IA) or IA-enabled products, interface specifications, and approaches to secure the environment., • U.S. Citizen with the ability to obtain a DOD Top Secret clearance required, • Bachelor’s degree in Computer Science, Information Systems, or Cybersecurity from an accredited institution required, • Minimum 2 years of experience with DFARS 7012, NIST 800-171, and other NIST publications required, • Minimum 1 year of experience with various data types such as CUI, FCI, CDI, CTI, and ITAR required, • Demonstrated experience in and exposure to cybersecurity compliance programs and organizations, especially CMMC, Cyber Accreditation Body (CyberAB), and Defense Industrial Base Cybersecurity Assessment Center (DIBCAC) required, • Prior experience with successful implementation of NIST 800-171, CMMC, and ITAR security controls including Microsoft 365 Government Community Cloud High (GCC High) environment and Federal Information Processing Standards (FIPS) required, • Knowledge and skill in cybersecurity fundamentals such as incident management, forensic analyses, obfuscation techniques, vulnerability scans, threat intelligence, encryption, and decryption required, • Broad understanding of client/server and webserver architectures and systems to facilitate required interaction with Managed Security Services Provider (MSSP) required, • Broad understanding of networking technologies, architectures, and tools required, • Knowledge of Internet network addressing required, • Familiarity with programming languages and methodologies required, • Knowledge of data management, retrieval systems, transfer technologies, and backup systems required, • CompTIA A+ certification required, • Certifications such as Certified Information Systems Security Professional (CISSP), CompTIA Security+, Certified Information Systems Auditor (CISA), highly preferred, • CMMC Certifications such as Certified CMMC Professional (CCP) or Certified CMMC Assessor (CCA) highly preferred

Job Description SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: • Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor., • Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations., • Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements., • Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data., • Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation., • Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive., • Immediately report all symptoms or suspected symptoms as early and accurately as possible., • Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation., • Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others., • Assist in the training of new personnel or tenders., • Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits., • Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site., • Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others., • Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance., • Ensure their medical certificates are up to date and recorded in their logbook., • Present their logbook to the Diving Supervisor on every job., • Maintain current certification in first aid and CPR., • Graduate of a professional diving school., • Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability., • Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld)., • Significant physical effort required. Significant exposure to physical risk., • Ability to pass annual diving physical., • Ability to obtain a U.S. Government security clearance. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status

Job Description At Credence, we support our clients’ mission-critical needs, powered by technology. We provide cutting-edge solutions, including AI/ML, secure cloud, digital transformation, and advanced intelligence capabilities, to the largest defense, health, and international development federal organizations. Through partnership and trust, we increase mission success for warfighters and secure our nation for a better future. We are privately held, are repeatedly recognized as a top place to work, and have been on the Inc. 5000 Fastest Growing Private Companies list for the last 12 years. We practice servant leadership and believe that by focusing on the success of our clients, team members, and partners, we all achieve greater success. Credence has an immediate need for System Engineers specializing in maritime navigation systems and sensors to include marine-grade commercial and/or militarized, (encrypted) Global Positioning Systems (GPS), Radar (solid state X band / S band), Automatic Identification Systems (AIS), Doppler Speed Log (DSL) and other similar shipboard sensors. Ideal candidates have a technical and/or engineering background providing integration, engineering, and installation services in support of shipboard navigation systems and sensors for the United States Coast Guard, United States Navy, United States Army (afloat), Merchant Marines, or the commercial maritime industry. Responsibilities Responsible for the development of integration engineering technical documentation/artifacts, (i.e. engineering changes, system interface diagrams, site survey reports, test plans, drawing redlines, etc.) in support of the USCG’s System Engineering Lifecycle (SELC) process. Provide subject matter expertise to USCG active duty and civilian personnel throughout the development process; from requirements development, design, and prototype, to implementation of complete navigation systems or individual sensors. Serve as the onsite representative (OSR) and navigation system/sensor expert during prototype installations or other field test activities. Travel CONUS/OCONUS to provide field support on USCG cutters, boats, and shore stations, as required. Requirements • Must possess an active Secret clearance, • Bachelor's Degree in the field of Electrical, System, Network, or Telecommunications Engineering with four (4) years of relevant and current experience., • Bachelor's Degree may be substituted as follows, • Comprehensive knowledge of DOD military specifications and standards. Demonstrated Expert with ten (10) years of concurrent, relevant experience in engineering, design, integration, corrective maintenance and installation of Command, Control and Communication Systems., • Extensive background and working knowledge of shipboard electronic navigation systems and sensors is desired., • Working knowledge of the Microsoft Office suite of applications to draft reports, emails, and presentations, create system architecture and integration diagrams, and possess a thorough knowledge of performing independent research., • Capable of independent troubleshooting and resolution of system integration issues associated with navigation systems and sensors, (i.e, GPS, Radar, DSL) in a shipboard environment., • Capable of conducting site surveys/ship checks and documenting results in a professional report format., • Read, interpret, and provide redline edits to shipboard navigation system drawings, including AC and DC power, block wiring diagrams, arrangements, and elevations., • Posses technical expertise necessary to advise USCG technical and engineering personnel during the development and recapitalizaiton of shipboard navigation systems and sensors., • Develop system/sensor test plans and procedures for use in a lab environment or on a maritime asset., • Capable of installing, testing, and commissioning navigation systems/sensors when required, (i.e., prototype efforts or emergent situations.), • Provide system lifecycle risk identification and mitigation strategies., • Develop and deliver Commercial Off-the-Shelf (COTS) or Government Off-the-Shelf (GOTS) integration and engineering design solutions., • Capable of developing engineering documentation within an established USCG System Engineering Lifecycle (SELC) and Engineering Change (EC) process., • Provide on-site, phone, and email support for the purpose of technical corrective maintenance to resolve system casualties as required., • Deliver expert level knowledge of troubleshooting and corrective maintenance involving complex electronic navigation systems.

Job DescriptionONSITE Who We Are: Founded in 2007, SimIS Inc. is an innovative information technology solution Veteran Owned Small Business (VOSB) that models future environments, requirements, and capabilities, and then secures the enterprise from internal and external threats compliant with Federal, State, and industry standard governance to ensure client mission success. Our performance standard is “excellence,” with an outcomes-based, quality focus in our services and products, guided by our core values of honesty (in word and deed), relationships (confidence and trust with clients and partners), teamwork (shared goals, mission, and purpose), loyalty (allegiance to our client and team), and importance of others (work and win as a team). SimIS is currently recruiting for the listed position and is contingent upon award. The position is anticipated to be “on site.” Job Description: NATO HQ Supreme Allied Command Transformation (NATO SACT) is seeking contract support for the capture, development, architecture, data science and quality assurance of capability requirements and operational analysis necessary to adapt to future threats and explore long-term military strategy to shape how NATO's forces will operate in the future. To support our NATO customer, SimIS Inc seeks a Strategic Thinker to support NATO Capability Program Managers and projects. The candidate will conduct research and analysis to support NATO’s Strategic Foresight, Strategic Planning and Execution, Strategic Gap Analysis, Strategy Implementation, Futures Thinking, Digital Transformation and Artificial Intelligence. Experience Required: • BS Degree in international relations, business administration, economics, public administration, operations research or related discipline. Master’s degree preferred., • Seven (7) years of experience in policy/strategy analysis or strategic planning., • Demonstrated experience in corporate, government, or academic environment in analysis in the area of international relations, security or strategic studies., • Experience in strategic analysis of China and the Sino-Russian relationship., • A basic understanding of Strategic Foresight, Strategic Planning and Execution, Strategic Gap Analysis, Strategy Implementation, Futures Thinking, Digital Transformation and Artificial Intelligence., • Previous experience in an international organization / governmental organization, preferably NATO experience.Responsibilities:, • Support implementation of Long-Term Military Strategic Shaping (LTMSS) Program of Work., • Facilitate and prepare workshops and other related events such as wargames., • Provide valuable input on NATO Warfighting Capstone Concept (NWCC) and Warfare Development Agenda (WDA) and offer ideas and related analysis., • Interpret military, political, economic, sociocultural, and technological trends and develop alternatives ways of assessment., • Conduct research and data analysis to inform strategic decisions, especially on China and the Sino-Russian relationship., • Develop plans to materialize long term strategy and analyze development proposals., • Conduct research to identify threats and opportunities., • Construct forecasts and analytical models., • Monitor and analyze global trends (cognitive topics, international relations, global security environment, industry and market changes, etc.).Benefits:, • Medical, Dental, and Vision, • Short-Term Disability (at no cost to you) & Long-Term Disability, • Life Insurance, • 401(k) Savings Plan, • Flex Spending Accounts, • Tuition Assistance Program, • Professional Development, • Paid Time Off (PTO) CFFT6CmXn2

Duties • You will serve as the Distinguished Engineer - Director for Unmanned Surface Vehicles (USVs), providing enterprise-wide scientific and engineering leadership for USV technology development., • You will serve as Director of USVs Distinguished Scientist/Engineer, providing technical leadership and expertise in the development and implementation of advanced technologies for unmanned surface vehicles., • You will lead and coordinate unmanned surface vehicle research, development, test, and experimentation across a broad network., • You will provide executive direction and strategic vision for the research, development, test, evaluation, and integration of USV technologies and systems across the Navy's warfare centers., • You will represent NSWC and the Navy as a USV subject matter expert at various technical forums and will provide technical guidance and recommendations across departments at NSWCCD., • You will provide technical expertise, supervision, and direction to division engineers and scientists in USV testing, USV modeling and simulation, and USV applicable technology development., • You will lead the planning and budgeting activities for USV-related programs, providing program sponsors and Warfare Center leadership with technical workload projections and skill assessments., • You will ensure USV systems are safe, reliable, effective, and operationally suitable for their intended missions., • You will be responsible for stewardship of USV Research, Development, Test, and Evaluation (RDT and E) and operating budget.\nRequirements Conditions of employment • Must be a US Citizen., • Must be determined suitable for federal employment., • Must participate in the direct deposit pay program., • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326., • Males born after 12-31-59 must be registered for Selective Service., • You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment., • You will be required to obtain and maintain an interim and/or final Top Secret/SCI security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal., • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing., • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes., • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\nQualifications Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin. To meet the minimum qualification requirements for this position, your resume must show that you possess the Technical Qualifications (TQ) related to this position - NOT TO EXCEED 2 PAGES. Resumes over the 2-page limit will be disqualified. Your resume should include examples of experience, education, and accomplishments applicable to the qualification(s). If your resume does not reflect demonstrated evidence of these qualifications, you may not receive consideration for the position. TECHNICAL QUALIFICATIONS (TQs): Your resume should demonstrate accomplishments that would satisfy the technical qualifications. TQ#1. Demonstrated experience leading research, development, test and evaluation (RDT&E) efforts, from basic research to prototyping and deployment, for unmanned surface vehicle systems and technologies. TQ#2. Demonstrated ability to furnish highly advanced and/or unprecedented scientific and/or technical guidance and recommendations to top-level administrative and technical management officials within the NR&DE, DON, DOD, other government agencies, and outside organizations such as academia and industry. Additional qualification information can be found from the following Office of Personnel Management website: AND All Professional Engineering series, 08XX Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: For 08XX Professional Engineering Series: A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. -or- B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or (II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or (IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable. Additional information Senior Scientific Technical Manager (SSTM) positions are positions which exceed the ND-05 (GS-15 equivalent). SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities. Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert. SSTM positions are in the competitive service. This position is not covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: There are three key documents that contain important information about your rights and obligations. Please read and retain these documents: • Noncriminal Justice Applicant's Privacy Rights , for those who undergo an FBI fingerprint-based criminal history record check for personnel vetting, which includes Rap Back,, • FD-258 Privacy Act Statement - FBI (this is the same statement used when your fingerprints are submitted as part of your background investigation), and

Job DescriptionJOB AD: Paramedics Introduction: Aspen Medical has an exciting opportunity for Paramedics to partner with us in providing temporary contracted medical services to Military Treatment Facilities throughout the United States. Today’s posting will place you at the primary location of the Naval Medical Center. This opportunity allows employees to work with the federal government, offering competitive compensation and a strong work-life balance. Hospital: Naval Medical Center Location: United States, Portsmouth, VA Minimum Qualifications: • Degree: Certification, • Certifications: (In addition to Basic Life Support) Possess and maintain certification as a Nationally Registered Paramedic (NRP) from the National Registry of Emergency Medical Technicians (NREMT) or State of Virginia Paramedic certification. Possess and maintain an American Heart Association (AHA) or American Red Cross (ARC) Advance Cardiac Life Support (ACLS) for Healthcare Providers certification and Pediatric Advance Life Support for Health Care Providers certification (PALS), • Education: Graduate from an accredited NREMT program, • Experience: Twelve (12) months of experience as an NR-P after graduation, • Licensure: Licensure as required to operate any Emergency Vehicle (EV)/Ambulance as applicable by the duty location assignedCore Duties:, • Serve as a Paramedic on a Specialty Care Team (SCT), providing specialized care utilizing critical care skills and intensive observational monitoring techniques to assess patient condition and provide an advanced level of specialized care to all critically ill patients (surgical, medical and pediatrics)., • Conduct long distance inter-facility critical care patient transfers to include critical care transport to higher level of care hospitals and medical centers., • Administer critical care drugs as necessary which require specialized knowledge of the monitoring and infusion equipment and the effects, side effects, doses, and dosages calculations due to the potency and potential to cause serious complications., • Remaining duties are listed within the PWS and can be provided upon request Benefits:, • Virtual Interviews, • Variable of locations throughout the United States., • Contract: Year-long assignment, • The Interfacility Transport Team and Transfer Center operate 24 hours per day, 7 days per week, including holidays. Paramedics will be assigned shifts to include an 8, 10, or 12-hour day, evening or night shift, on the Interfacility Transport Team and Transfer Center on a rotating basis. A typical shift may include but is not limited to 0600-1800, 1500-2300, 2200-0600 and 1800-0600. Shift location and shift needs will be determined by the designated government representative. Weekend work and alternate shifts may be required. No contract personnel shall be allowed to perform services more than 80 hours in a two-week period. Specific days, hours, and shift length will be scheduled by the designated government representative. The specific schedule for each two-week period will be provided one month in advance. At the mutual agreement of the Contractor and the Government, alternative schedules may be implemented such as a compressed work schedule. Any changes in the schedule shall be coordinated between the contracted personnel and the Government. Any planned absences of the contract personnel shall be communicated to the Government supervisor in advance of the absence to ensure that clinical operations are not adversely affected. The Government reserves the right to change shift hours with a seventy-two (72) hour notice to accommodate patient care needs and mission requirements., • Detailed pay rates will be outlined in the initial interview phase Aspen Medical is committed to a diverse and inclusive workplace. We are an equal opportunity employer, and Aspen Medical does not discriminate based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request accommodation, please contact . By joining Aspen Medical, you will join a responsive mission-driven organization where you will be a vital member of a small, dynamic team supported by a large international corporation. Powered by JazzHR 2xpng90YMU

Job DescriptionCompany Description Veolia is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Job Summary: The Driver delivers trailers customized with mobile water treatment equipment to customer sites regionally and occasionally throughout North America utilizing company owned or leased tractors. Drivers operate leased late model state of the art tractors with 24-7 roadside coverage by the fleet team. Key Characteristics (Highlight characteristics required to succeed in the role) * Ability and willingness to work / deliver to a range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities * Ability and willingness to make runs as assigned * Ability and willingness to make runs across international borders if required * Ability and willingness to work on call / standby rotation * Ability to follow DOT Regulations * Ability to operate tractor-trailers in a safe manner Duties & Responsibilities * The Driver delivers trailers customized with mobile water treatment equipment to customer sites regionally and occasionally throughout North America utilizing company owned or leased tractors. * Assists in local movement of equipment to customer sites, repair facilities or other company facilities or within the service center compound. * Some deliveries require set-up/start-up of standard mobile water treatment equipment, make minor repairs or provide instructions to customers. * Conducts company business in a professional manner while working with Field Service Representatives, Sales, Logistics and our customers. * Complies with all government, DOT and company guidelines, regulations and laws. * Maintains accurate logs of driving hours as required by DOT HOS * Operates tractor-trailer and equipment in a safe manner * Performs pre and post trip inspections to ensure safety and compliance * Other duties as assigned Knowledge, Skills & Abilities * Good Communication Skills – verbal and written * Detail Oriented * Good Problem Solving and Troubleshooting Skills * Good Judgment Skills Qualifications Required: * High School Diploma, GED, Home School Certification or international equivalent to a HS Diploma * 2 years tractor trailer, multistate driving experience in all weather conditions. * CDL-A Drivers License with Hazmat and Tanker Endorsements prior to hire. * Clean driving and safety record. Additional Information * The Driver delivers trailers customized with mobile water treatment equipment to customer sites regionally and occasionally throughout North America utilizing company owned or leased tractors. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job DescriptionONSITE Who We Are: Founded in 2007, SimIS Inc. is an innovative information technology solution Veteran Owned Small Business (VOSB) that models future environments, requirements, and capabilities, and then secures the enterprise from internal and external threats compliant with Federal, State, and industry standard governance to ensure client mission success. Our performance standard is “excellence,” with an outcomes-based, quality focus in our services and products, guided by our core values of honesty (in word and deed), relationships (confidence and trust with clients and partners), teamwork (shared goals, mission, and purpose), loyalty (allegiance to our client and team), and importance of others (work and win as a team). SimIS is currently recruiting for the listed position and is contingent upon award. The position is anticipated to be “on site.” Job Description: NATO HQ Supreme Allied Command Transformation (NATO SACT) is seeking contract support for the capture, development, architecture, data science and quality assurance of capability requirements and operational analysis necessary to adapt to future threats and explore long-term military strategy to shape how NATO's forces will operate in the future. To support our NATO customer, SimIS Inc seeks a Political Warfare SME to support NATO Capability Program Managers and projects. The candidate will serve as a SME on Political Warfare as it relates to NATO, Russia, China, and state sponsored Terrorism within the Strategic Plans and Policy (SPP) Directorate. Experience Required: • Master's degree in International Relations, Political Science or related field., • Proven ability to communicate effectively, both orally and in writing., • Demonstrated experience working with international teams., • Possess experience working in a Strategic Headquarters dealing with complex issues., • Demonstrated research experience related to the field or expertise: published work that demonstrates knowledge of regional political / geopolitical, human, and economical issues., • Developing, coordinating, and advising on the implementations of NATO Warfighting Capstone Concept (NWCC) Warfare Development Agenda (WDA) Lines of Delivery focused on the NWCC timeline and the political warfare challenges associated with Russia, China, and terrorism., • Support of SPP’s Political-Military Affairs Constellation Group and related strategic initiatives, including SPP’s NATO-Ukraine Joint Analysis Training Education Centre (JATEC) project titled “Political-Military Strategy Development”., • Support strategy development by coordinating internal and external subject matter expertise on Russia and China; support of designated projects ensuring alignment with HQ SACT Red Team, SHAPE J2 Red Team, NATO HQ entities, and relevant external entities., • Conduct in-depth research and analysis on political warfare to support HQ SACT’s Strategy Development Programme of Work: Russia’s Theory of Victory, military strategies and doctrine., • Provide specialized strategic, operational and analytical support to SPP Strategy Policy and Analytics (SPA) Strategic Research Officer, offering insights and expertise to enhance the effectiveness of research activities and outputs. Assist in drafting, reviewing, and finalizing PLP reports, strategic analyses to ensure high-quality deliverables that meet NATO standards.Benefits:, • Medical, Dental, and Vision, • Short-Term Disability (at no cost to you) & Long-Term Disability, • Life Insurance, • 401(k) Savings Plan, • Flex Spending Accounts, • Tuition Assistance Program, • Professional Development, • Paid Time Off (PTO) mmEbVtJAfz

1st Class Field Manual Machinist - Steel America Purpose: Steel America, a business unit of Colonna's Shipyard, is seeking 1st Class Manual Field Machinists to work multiple on & off-site projects in and around Norfolk, VA. Job Description: • Routine blueprint reading and technical writing to accomplish work tasks., • Daily use of tools such as micrometers, height gauges, Vernier calipers, and dividing heads to support tasking., • Operate machine tools in varying tolerances according to need (from ½ thousands upwards)., • Non routine maintenance and repair the portable machines tools., • Routine use of hoisting and rigging equipment for heavy pieces such as forklifts and chain falls, • Responsible for system tolerance determination and application., • Daily tasking will involve work on the following:, • Rudders and Steering systems to include blue checking and fitting, piano wire alignment method, stock straightness determination, hydraulic and pneumatic controls., • Bearings and Bushings to include lubrication types and methods, piano wire fit and alignment method, dial indicator alignment., • Engines, Motors, and Generators: diesel engines, gas or steam turbines, generators, motors, reduction gears, clutches, PTO's, mount arrangements, systems flushing, heat exchanger (shell/tube and plate/frame), heat exchanger and systems leak testing., • Propulsion Shafting to include: CPP shafting, hydraulic couplings, clearance (water bearings), wear downs (oil bearings), Piano wire alignment method, dial indicator alignment, FRP spark test, bearing contact determination, shaft straightness (run out) determination., • Seals to include gaskets, packing, and "O"-rings, lips & labyrinth, mechanical, tightness testing., • Valve work: leak testing, seat types, packing/gasketing/lubrication, lapping, seat types (materials and types)., • Propellers to include Keyed, Tapered, Flanged & Key fits- Solid and Built, CPP Systems, Polishing., • K. Pumps to include Valving (internal & external), Bearing & Sealing arrangements, Alignment (dial indicator & laser)., • Deck machinery: gear boxes, bearings/seal arrangements, alignments, drivers (electric, mechanical, or hydraulic), sheaves, cables, turrets, booms, • Instruct lower classes of machinists, manage work/personnel assignments and the requisition of job materials., • Must have a high school diploma or equivalent and at least seven (7) years of experience as a Machinist., • Must have experience with manual lathes and mills., • Must be able to read and comprehend blueprints, drawings and other technical trade related documents, • Must have adept mechanical ability, manual dexterity, and hand/eye coordination required to perform various projects, per drawings, sketches, and verbal or written instructions., • Position requires you to gain and maintain access to government and military installations, often requiring completion of stringent background checks and screenings., • May require the ability to obtain and maintain appropriate level of security clearance depending on the contract., • Frequent Travel; 50% or less., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Job Description The Rigger Shop Mechanic performs a variety of skilled mechanical duties involving deck machinery, engine room work, electronic equipment, staging work, testing, steel/pipe work, general dock, rudders, shafting, wheel work, and anchor chain work. The Mechanic operates equipment for assembly and installation; performs preventative and predictive maintenance on facility machinery; records work performed and follows specified safety policies and procedures. Key Responsibilities & Functional Knowledge: This list is representative of the key areas of responsibility and functional knowledge required of a mechanic in the rigger shop. A mechanic must demonstrate a developing knowledge of the skills, functional knowledge and abilities required to perform tasks in these and related areas of responsibility. Developing knowledge means that the mechanic understands how to perform tasks in these categories (including, but not limited to, the specific tasks identified below) and is able to complete them with minimal assistance. This also means that the mechanic has the necessary level of knowledge of the equipment, protective gear, and machinery required to complete these tasks. In some cases, as specified, the mechanic is expected to assist, rather than completing the task independently. -Anchor Chain Work -Make metal tags -Break detachable links (including baldt/kenter style links) -Transport - load/unload - trailers/pallets (Preferred) -Read a micrometer -Assist in counting anchor shots and tags -Assist in removing and reinstalling bitter ends - open/closed fo'c'sle -Assist in measuring chain links and detachable links including snap gauge shots -Wheel Work (Hubs/Blades/CCP System) -Hook up and operate air falls -Install and remove blade pallet rig -Transport hub - trailer/boom dolly (Preferred) -Assist in proper sling/grommet hook up - hull -Dry-Dock Related Shafting Work -Assist in method of removal - pad eye placement - select gear -Assist in shaft transporting - trailer/boom dolly -Shaft Alley Related Shafting Work -Removal of bulkhead seals -Deck Machinery Work (work with cranes and cargo booms) -Wires - Assist with removing/reeve system/blocks -Booms - Assist with removing /install and proper method/gear selection for ABS quadrennial -Blocks - Assist with removing /reinstall [ABS quadrennial] -Testing - Assist with setting up, [navy test] [ABS test] -B&A crane - Assist with removing /reeve wire ropes -B&A crane - Assist with boom removal [method/select gear/block/transport] -B&A Crane - Assist with testing and set up -Routine Engine Room Work -Method/gear/route walked -Proper lashing/rig gear applications -Small pumps, motors, valves [less than 24"], pipe, vent ducting, etc. -Install and remove flushing gear -Main Engine/SSDG Overhaul Work -Install and remove flushing gear -Electronic Equipment Inspections -Complete inspection procedures -Determine follow up required -Staging Work -Must be familiar with the staging procedure -Must be familiar with proper building practices for the QES/Burke -Steel/Pipe Related Work: -Complete steel repair work and or piping work on various areas outside of the engine room -General Dock-Related Work -Blocking -Docking/undocking -Mooring ships -Gangway/platforms -Other various dock-related tasks -Must be familiar with Hook-on (ship/pier) Required Education, Experience, & Skills Minimum education: 4 to 7 yrs. Minimum relevant education: Practical Theory Requirements: A mechanic must demonstrate a developing understanding of naval vessel compartments, number systems and related vessel terminology for the CG, DDG, and LHD ships. Knowledge of job planning and executing, proper gear selection, leading helpers and handypersons with normal supervision. Other Requirements: -Must be able to read, write and comprehend simple instructions -Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form -Must be able to calculate and understand units of measure -Must be able to wear appropriate protective gear -Must be able to obtain a government access badge. This job description does not include all activities, duties or responsibilities required for this position. The key duties, responsibilities and requirements identified in this description are subject to modification by the Company (in consultation with the Union, as appropriate) at any time. Preferred Education, Experience, & Skills High School/Ged Pay Information This position is covered under a Collective Bargaining Agreement (CBA), which will determine your wages. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life including health and financial well-being. Benefits for Union employees are governed by a Collective Bargaining Agreement (CBA), so your benefits may differ from those described here. Generally, employees are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, which may include military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and ship repair...just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too.

Amee Bay, LLC a subsidiary of Three Saints Bay, LLC and a Federal Government Contractor industry leader, is seeking an Apprentice Electrician to join our Team in Chesapeake, VA. Qualified Candidates will be able to: \n • Work closely with Senior Electricians to develop or improve current knowledge of various shipboard electrical tasks.\n, • Learn how to read electrical drawing/diagrams.\n, • Develop key skills to execute clean and efficient wiring in cabinets.\n, • Learn to properly route cables throughout cableways.\n, • Use calibrated tools such as Multi-Meters and Meggers\n\n Other Duties and Responsibilities: \n • Transport materials, tools, and equipment to and within work sites as required.\n, • Inventory received material.\n, • Help maintain a clean worksite.\n, • Assist senior technicians with drilling, cutting, and modifying various shipboard items.\n, • Be able to frequently lift up to 50 pounds\n\n Position Requirements: \n • US Citizenship.\n, • Must meet requirements to obtain a Federal Secret Clearance.\n, • High School Diploma or equivalent.\n, • Minimum of one (1) year of marine/maritime related experience.\n, • Ability to perform general maintenance tasks.\n, • Ability to follow written and verbal instructions.\n, • Knowledge of relevant tools and equipment.\n, • Ability to work aboard ships which includes frequent climbing, bending, and working in confined spaces.\n, • Must have a Valid U.S. Driver's License.\n, • Must pass drug screening as a condition of employment.\n\n This position is located in Chesapeake, VA. To apply: https://phg.tbe.taleo.net/phg01/ats/careers/v2/viewRequisition?org=GATEWAYVENT&cws=55&rid=4265 VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a QA & NDT Level II Technician to support our operations on Navy contracts, with a focus on Quality Assurance activities in Chesapeake, VA. Position Responsibilities: \n • Manage and support QA activities related to Navy contracts, ensuring full compliance with Navy specifications (e.g., MIL-STD, NAVSEA, MIL-PRF) and other relevant industry standards.\n, • Conduct detailed inspections and audits of products, processes, and systems in accordance with military standards, ensuring the adherence to quality specifications and requirements.\n, • Review and analyze technical documentation, blueprints, and engineering drawings to assess compliance with project requirements and quality standards.\n, • Develop and review quality control procedures for naval projects, ensuring all quality metrics, tests, and inspections meet the specific standards for Navy contracts.\n, • Collaborate with Navy engineers, contractors, and subcontractors to ensure effective communication and alignment with quality expectations for all deliverables.\n, • Ensure all materials, components, and systems meet the stringent military-grade quality requirements for operational readiness and long-term reliability.\n, • Monitor and track non-conformances, initiating corrective actions to address quality issues and ensuring compliance with Navy regulations.\n, • Lead quality reviews and inspections of materials, systems, and processes used in shipbuilding, submarine construction, and military equipment maintenance and repair.\n, • Oversee and assist with the preparation of quality assurance documentation including test plans, inspection reports, and final certification reports.\n, • Conduct root cause analysis and support continuous improvement initiatives to enhance quality assurance processes, mitigate risks, and optimize performance.\n, • Ensure the calibration and maintenance of all QA testing and inspection equipment in accordance with Navy and military standards.\n, • Perform supplier quality audits to ensure third-party vendors meet the necessary quality requirements for materials and components.\n, • Provide training and mentoring to junior QA personnel and assist in the development of quality assurance programs for Navy-related projects.\n, • US Citizen.\n, • Must be able to obtain and maintain an Active Secret Clearance; Candidates currently possessing an Active Secret Clearance are preferred.\n, • High School Diploma or Equivalent.\n, • QA experience with a focus on Navy contracts or military-related projects, ideally within shipbuilding, defense systems, or naval vessel maintenance.\n, • Minimum of 5 years of experience in a quality assurance role with hands-on experience in the defense industry.\n, • Familiarity with military standards, including NAVSEA, MIL-STD, and other DoD quality specifications.\n, • Strong understanding of quality management systems (QMS), ISO standards, and relevant industry codes (e.g., ASME, ASTM, API).\n, • Ability to interpret and evaluate engineering drawings and technical specifications to ensure quality compliance.\n, • Proficiency with QA software and reporting tools used for tracking non-conformances, inspections, and audit documentation.\n, • Knowledge of root cause analysis (RCA), failure mode analysis, and the corrective action process.\n, • Excellent written and verbal communication skills, including the ability to prepare technical reports and quality assurance documentation for Navy contracts.\n, • Ability to work independently and within a team to achieve military and project-specific quality objectives.\n, • Ability to work in shipyard environments, confined spaces, and other physically demanding settings typical of Navy-related projects.\n, • Ability to lift and carry equipment up to [insert weight].\n Apply online at: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Job Description BB&E is a full service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering and Program/Project Management Services to Federal and private sectors. Position Summary BB&E is currently looking for a Senior Fire Protection Engineer to provide Fire Protection Engineering design support services to support Design-Bid-Build and Design-Build projects and associated efforts undertaken by NAVFAC Mid-Atlantic program, at Norfolk Naval Station. Job Duties & Responsibilities · Provide independent, timely and professional fire protection engineering support, services and consultation for the planning, design, construction, and maintenance of facilities for the Navy, Marine Corps, and other Supported Commands, including minor works projects, specific projects, special projects, military construction (MILCON), demolition, maintenance, space utilization and facilities development. · Participate in conferences with project stakeholders and collaborates with other engineering and architectural disciplines to ensure system coordination and integration with specific project requirements. · Typical projects include: fire protection engineering services for life safety, type of construction, height and area requirements, separation distances, fire rated construction, spray-applied fireproofing, firestopping, sprinkler systems, fire alarm systems, mass notification systems, clean agent fire suppression systems, base-wide fire alarm reporting systems, water distribution systems, hydraulic analysis, fire modeling, and performance-based designs of major size and complexity for use in government facilities, including multi-story office buildings, steam plants, hospitals, housing, manufacturing, training, and similar structures. Requirements · Registration as Professional Engineer (PE) in the discipline of Fire Protection Engineering is required. · Substantial professional knowledge and practical application of fire protection engineering concepts, theories, principles, practices, and techniques necessary to plan, design, construct and maintain a wide range of shore-based engineering projects. · Knowledge of DoD and Navy guide specifications, criteria and policy, industry codes and standards, and standard practices as related to fire protection engineering design, including the Unified Facilities Criteria (UFC), National Fire Protection Association (NFPA) codes and standards, International Building Code (IBC), International Mechanical Code (IMC),International Residential Code (IRC), FM Global Loss Prevention Data Sheets, Society of Fire Protection Engineer's Handbook, and various other industry standards. · Knowledge of local, state, federal, and foreign country laws, codes, and other statutory requirements affecting fire protection engineering design throughout the NAVFAC Mid-Atlantic AOR. · Knowledge of related architectural and engineering fields and their associated impacts as related to fire protection engineering design. Ability to make oral presentations of proposed designs and results of studies · Knowledge and experience with Autodesk software, Microsoft Office products, fire protection engineering design and analysis software and other applicable DoD computer systems and software used by the Command. · Ability to produce results of analysis in writing and consolidate findings of others and evaluate recommendations and facts. · Knowledge of budgeting, planning and project management techniques, including the ability to coordinate the work of others and lead teams. · Knowledge of and full compliance with Safety Policy and Guidance, and use of personal protective equipment. Experience & Education · Experience: A minimum of 10 years of professional fire protection engineering code compliant facilities design experience for new construction, including renovation design experience, is required. · Education: Completion of a course of studies accredited by the Accreditation Board for Engineers and Technology (ABET) for a fire protection engineering program from a college or university for a bachelor's or master's degree in mechanical engineering or fire protection engineering, supplemented by a considerable amount of hands-on facilities design experience, is required. If degree is in mechanical engineering, then a PE registration in the discipline of Fire Protection Engineering is required Physical Requirements · Ability to stand/walk/climb/kneel/crouch and remain in a stationary position/sit at least 60% of the time · Ability to operate office equipment, including computer, copy machine, phone, etc. · Ability to use hands to finger, handle or feel objects or controls; reach with hands and arms · Capable of lifting up to 10 lbs. · Ability to see details of objects that are less than a few feet away · Ability to understand the speech of another person, speak clearly so listeners can understand, and talk or hear both in person and by telephone Benefits Compensation, Benefits & Perks · Competitive compensation packages · Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned! · Discretionary bonus · *Medical, Dental, and Vision Insurance with health care concierge · *Employer provided Short-Term & Long-Term disability · *Employer provided Life insurance · *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits · *Generous PTO plus 11 paid holidays · Traditional & Roth 401(k) options with fully vested employer match · Tuition reimbursement & professional development · Employee referral program · Financial wellness resources · Employee discounts · Employee Assistance Program (EAP) · Pet insurance discount *Applies only to full-time employees *BB&E is an Equal Opportunity Employer and an Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

A company is looking for a Defense & Government Travel Consultant II.Key Responsibilities Create domestic and international travel arrangements for clients, including air, hotel, rail, and ground transportation Ensure reservations meet client standards and preferences, acting as a trusted advisor

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an experienced Naval Marine Shipboard Electrician to join our team in Norfolk, VA. Position Overview: 1st Class electricians test, manufacture, troubleshoots, repair, red-line drawings and make design recommendations for electrical and electronic equipment. The employee will perform a wide variety of different tasks depending on the needs of the company. Position Responsibilities: \n • Knowledge of navy AC (60 and 400 Hz) and DC electrical systems\n, • Navy tag-out, WAF programs and applicable Naval procedures / instructions\n, • Maintain QWI and associated forms\n, • Implements and monitor OSHA safety\n, • Demonstrate the ability to supervise junior personnel\n, • Knowledge of Navy electrical and electronic systems\n, • Able to troubleshoot, disassemble, and inspect electrical equipment\n, • Able to clean electrical equipment and parts, reassemble, and operationally test equipment.\n, • Knowledge of electrical systems such as switchboards, switchgear, distribution panels, controls, etc.\n, • Versed in the use of common electrical measuring instruments, and of various electronic measuring devices, such as voltmeters, ammeters, ohmmeters, power analyzers and megohmmeters.\n, • Familiar with the use of Precision Measuring Instrumentation\n, • Ability to read and interpret blueprints, sketches, written technical instructions and manuals.\n, • Ability to plan and make working diagrams and circuits.\n, • Capable of cable run fabrication and wire way fabrication\n, • US Citizenship\n, • Must be able to obtain/maintain security and base access clearance. Active clearance is preferred \n, • High School Diploma or equivalent\n, • Navy 'A' / 'C' school(s) or completion of a vocational, maritime, or journeyman training program.\n, • Minimum eight (8) years' experience.\n, • Must have a valid U.S. Driver's License\n, • Must pass drug screening.\n\n This position is located in Norfolk, VA. To apply: The hourly rate for this position is $26.00 - $35.00 based on experience VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an experienced Naval Marine Shipboard Electrician to join our team in Norfolk, VA. Position Overview: 1st Class electricians test, manufacture, troubleshoots, repair, red-line drawings and make design recommendations for electrical and electronic equipment. The employee will perform a wide variety of different tasks depending on the needs of the company. Position Responsibilities: \n • Knowledge of navy AC (60 and 400 Hz) and DC electrical systems\n, • Navy tag-out, WAF programs and applicable Naval procedures / instructions\n, • Maintain QWI and associated forms\n, • Implements and monitor OSHA safety\n, • Demonstrate the ability to supervise junior personnel\n, • Knowledge of Navy electrical and electronic systems\n, • Able to troubleshoot, disassemble, and inspect electrical equipment\n, • Able to clean electrical equipment and parts, reassemble, and operationally test equipment.\n, • Knowledge of electrical systems such as switchboards, switchgear, distribution panels, controls, etc.\n, • Versed in the use of common electrical measuring instruments, and of various electronic measuring devices, such as voltmeters, ammeters, ohmmeters, power analyzers and megohmmeters.\n, • Familiar with the use of Precision Measuring Instrumentation\n, • Ability to read and interpret blueprints, sketches, written technical instructions and manuals.\n, • Ability to plan and make working diagrams and circuits.\n, • Capable of cable run fabrication and wire way fabrication\n, • US Citizenship\n, • Must be able to obtain/maintain security and base access clearance. Active clearance is preferred \n, • High School Diploma or equivalent\n, • Navy 'A' / 'C' school(s) or completion of a vocational, maritime, or journeyman training program.\n, • Minimum eight (8) years' experience.\n, • Must have a valid U.S. Driver's License\n, • Must pass drug screening.\n\n This position is located in Norfolk, VA. To apply: The hourly rate for this position is $26.00 - $35.00 based on experience VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an experienced Naval Marine Shipboard Electrician to join our team in Norfolk, VA. Position Overview: 1st Class electricians test, manufacture, troubleshoots, repair, red-line drawings and make design recommendations for electrical and electronic equipment. The employee will perform a wide variety of different tasks depending on the needs of the company. Position Responsibilities: \n • Knowledge of navy AC (60 and 400 Hz) and DC electrical systems\n, • Navy tag-out, WAF programs and applicable Naval procedures / instructions\n, • Maintain QWI and associated forms\n, • Implements and monitor OSHA safety\n, • Demonstrate the ability to supervise junior personnel\n, • Knowledge of Navy electrical and electronic systems\n, • Able to troubleshoot, disassemble, and inspect electrical equipment\n, • Able to clean electrical equipment and parts, reassemble, and operationally test equipment.\n, • Knowledge of electrical systems such as switchboards, switchgear, distribution panels, controls, etc.\n, • Versed in the use of common electrical measuring instruments, and of various electronic measuring devices, such as voltmeters, ammeters, ohmmeters, power analyzers and megohmmeters.\n, • Familiar with the use of Precision Measuring Instrumentation\n, • Ability to read and interpret blueprints, sketches, written technical instructions and manuals.\n, • Ability to plan and make working diagrams and circuits.\n, • Capable of cable run fabrication and wire way fabrication\n, • US Citizenship\n, • Must be able to obtain/maintain security and base access clearance. Active clearance is preferred \n, • High School Diploma or equivalent\n, • Navy 'A' / 'C' school(s) or completion of a vocational, maritime, or journeyman training program.\n, • Minimum eight (8) years' experience.\n, • Must have a valid U.S. Driver's License\n, • Must pass drug screening.\n\n This position is located in Norfolk, VA. To apply: The hourly rate for this position is $26.00 - $35.00 based on experience. VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Manager, Technical Program Management (Cloud Operations Resilience Engineering).Are you interested in leading programs that deliver on critical business goals and build large scale products & platforms?.At Capital One, we’re changing banking for good.We were founded on the belief that no one shoul

The Mechanical Project Manager coordinates and directs a project team's mechanical engineering, design, procurement, and construction efforts to meet a customer's project objectives in accordance with the terms defined in the contract applicable to the work.The Mechanical Project Manager provides, e

Manager, Support Operations (Data Platforms, Service Now, AWS, IT Systems Infrastructure).An IT leader, with a detailed understanding of IT Service management principles.Manages teams providing technology support operations in the areas of data platforms, end user support, IT incident Management, ch

I am exclusively representing a multi $B+ revenue Top ENR General Contractor, boasting a broad geographical footprint, with more than 20 locations across the US.Being already well established across 15+ market sectors, they are investing heavily into their Aviation Group, in the view of bolstering t

Manager, Technical Program Management (Cloud Operations Resilience Engineering).Are you interested in leading programs that deliver on critical business goals and build large scale products & platforms? At Capital One, we’re changing banking for good.We were founded on the belief that no one shoul

Interfaces with Government and contractor leadership to ensure smooth operational execution. Excellent written and verbal communication skills for coordination with Government and staff. Additionally, as a federal, state, and local contractor, Hornblower complies with government regulations, includi

Manager, Support Operations (Data Platforms, Service Now, AWS, IT Systems Infrastructure).An IT leader, with a detailed understanding of IT Service management principles.Manages teams providing technology support operations in the areas of data platforms, end user support, IT incident Management, ch

SEA 21, NAVSEA's Director of Surface Ship Maintenance, Modernization, and Sustainment is seeking professional support services to support the Government's existing organization, personnel, knowledge, and processes.

Manager, Support Operations (Data Platforms, Service Now, AWS, IT Systems Infrastructure).An IT leader, with a detailed understanding of IT Service management principles.Manages teams providing technology support operations in the areas of data platforms, end user support, IT incident Management, ch

Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. You will work closely with Government and industry professionals as well as shipbuilders and other support personnel.

Manager, Technical Program Management (Cloud Operations Resilience Engineering).Are you interested in leading programs that deliver on critical business goals and build large scale products & platforms?.At Capital One, we’re changing banking for good.We were founded on the belief that no one shoul

Senior Project Manager / Architect - Retail (Hybrid).We are partnering with a well-established, multi-discipline architecture firm with a strong presence in the Mid-Atlantic region.The firm delivers high-quality design across a diverse range of project types.The position supports a Retail studio bas

Senior Software Engineer, Back End (Enterprise Platforms Technology).Do you love building and pioneering in the technology space? Do you enjoy solving complex business problems in a fast-paced, collaborative, inclusive, and iterative delivery environment? At Capital One, you'll be part of a big grou

Navy's Continuous Training Environment (NCTE).We provide critical engineering and technical expertise for the U.Live, Virtual, Constructive (LVC).Our work involves seamlessly integrating live training with synthetic systems to create highly realistic and complex global training environments.We also

Manager, Technical Program Management (Cloud Operations Resilience Engineering) Job Description Are you interested in leading programs that deliver on critical business goals and build large scale products & platforms? At Capital One, we’re changing banking for good.We were founded on the belief t

Senior Project Manager – Multidisciplinary Group Project.Norfolk, Virginia (required full-time residence for the duration of the project ~1 year).Full-time, on-site in Norfolk, VA.The Senior Project Manager will lead and coordinate a strategic, multidisciplinary project that integrates several com

Architectural Designer / Assistant Project Manager - Retail (Hybrid).We are partnering with a multi-discipline architecture firm supporting Retail and Commercial projects.This role is ideal for an architect with 3-5 years of experience looking to grow through hands-on production work and team collab

Government, this position will require U. Scientific Research Corporation is an advanced information technology and engineering company that provides innovative products and services to government and private industry, as well as independent institutions. For positions requiring a security clearance

Manager, Site Operations And Logistics.Abbott is a global healthcare leader that helps people live more fully at all stages of life.Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and bra

Collaborate effectively with international teams located in Austria, India, Australia, and other global locations. Willingness and ability to travel domestically and internationally up to 25%.

Office in Norfolk, VA, presence throughout the Elizabeth River Watershed .The Elizabeth River Project is a mission-driven nonprofit dedicated to restoring the health and resilience of the Elizabeth River and its surrounding watershed.Through science-based restoration, community partnerships, and in

Rainbow International LLC is the franchisor of the Rainbow International Restoration® franchised system. Each Rainbow International Restoration® franchised location is independently-owned and operated by an independent franchisee performing services. Rainbow International LLC is NOT the employer s

Collaborate effectively with international teams located in Austria, India, Australia, and other global locations. Willingness and ability to travel domestically and internationally up to 25%.

Location: CHESAPEAKE, VA 23320, USA.Join the Hair Cuttery Family of Brands as a Licensed Salon Leader! You will enjoy a dynamic work environment where your skills can shine and your leadership will inspire.Your compensation will include a salary and commission based on your performance, with additio

Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. You will work closely with Government and industry professionals as well as shipbuilders and other support personnel. If requested, this will require prese

Manager, Technical Program Management (Cloud Operations Resilience Engineering) Job Description Are you interested in leading programs that deliver on critical business goals and build large scale products & platforms? At Capital One, we’re changing banking for good.We were founded on the belief t