Offres land management à Mobile, AlabamaCréer des alertes d'emploi

Job Description Thompson Engineering is currently seeking a Construction Engineering & Inspection (CEI) Project Manager for the Mobile, AL location. The position will complete assignments for transportation projects that will include inspection, measuring and documenting work performed by a construction contractor and providing support as required to other Senior Inspection staff.The project manager will support as the point of contact between the contractor and the client to ensure that each project is executed efficiently and effectively. In addition, they will support in assigning inspectors and field technicians to projects, assuring that all are properly trained and equipped and have necessary certifications to perform inspection on construction projects. Key Responsibilities • Read and interpret construction documents including, but not limited to, drawings, specifications, standards, and shopping drawings., • Perform oversight of field inspections, observations testing of construction activities to ensure compliance with project plans, approved shop/working drawings, project documents and specifications in accordance with established procedures, • Represents Thompson Engineering and interacts in a professional manner with client, teaming partner firms and subcontractor representatives, • Understands, applies and oversees safety requirements in the field Skills / Qualifications: • Ten years of experience in construction inspection, surveying or highway materials testing or, • Five years of the above experience with a Bachelor of Science degree in Civil Engineering or, • Registered Professional Engineer with above experience Physical Demands • Ability to stoop, kneel, climb and lift up to 50 pounds, • Ability to drive large pick-up truck, • Ability to use hands to operate field equipment About Us: Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet literally performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job DescriptionPosition Overview Thompson Engineering is seeking a Senior Structural Engineer with specialized experience in bridge design to join our growing Structural Engineering Team. This role is ideal for a seasoned engineer with a strong background in the design of bridges for federal, state, and local government projects. The primary responsibility of this position is to ensure the safety, strength, and integrity of structures we design. The successful candidate will demonstrate expertise in the application of AASHTO codes and state-specific transportation design procedures and will play a key role in the evaluation, design, and reporting of structural systems. Key Responsibilities * Perform structural analysis, modeling, and design for a variety of public and private sector projects. * Focus on state and local highway bridge design, with additional work including: * Commercial building structures * Industrial structures (e.g., pipe racks, personnel platforms) * Heavy civil foundations * Marine and waterfront structures (e.g., piers, bulkheads, wharfs) * Retaining walls and similar infrastructure * Utilize OpenBridge (LEAP) software for bridge structural analysis. * Ensure compliance with state bridge bureau guidelines and specifications. * Select materials appropriate for each project to ensure durability and code compliance. * Produce technical reports, design documents, and support client communication. * Maintain high-quality deliverables and ensure accuracy in engineering documentation. * Manage time efficiently across multiple projects with minimal supervision. * Collaborate with project managers, contractors, and multidisciplinary teams. Qualifications * Education: * Bachelor's degree in Civil/Structural Engineering from an ABET-accredited university * Experience: * Minimum 10 years of bridge design experience * Licensure: * Must have a current Professional Engineer (PE) license * Technical Skills: * Proficient in: * Structural FEA Analysis * OpenBridge (LEAP) * MicroStation * Microsoft Office (Word, Excel) * Certifications: * Not required * Physical Requirements: * Ability to work flexible schedules and overtime as needed * Must be able to sit and operate a computer for extended periods Today, our teams lead projects that define skylines, coastlines, and transportation corridors across the Southeast. From early-stage environmental assessments and land surveys to cutting-edge design solutions and construction management, we are there from concept to completion.

Job Description Director of Economic Development Location: Downtown Mobile, AL (100% in-office, no hybrid option) Salary: $75,000–$95,000 annually, based on experience Employment Type: Full-time | Exempt About Us Downtown Mobile Alliance is a nonprofit organization dedicated to the revitalization, promotion, and continued growth of downtown Mobile. We work closely with property owners, businesses, civic leaders, and the public to strengthen our vibrant urban core through advocacy, placemaking, marketing, and events. Position Summary The Downtown Mobile Alliance (DMA) is seeking an experienced, strategic, and data-driven Director of Economic Development to lead downtown Mobile's economic growth and revitalization. This senior-level role is ideal for professionals with 5-8 years of experience in economic development, urban planning, real estate, or public policy. The Director will serve as a strategist and primary point of contact for investors, developers, civic partners, and the media, overseeing programs, policies, incentives, and research that shape downtown's future. Key Responsibilities Strategic Development & Leadership • Lead downtown's economic development strategy in alignment with DMA's Management plan and BID expansion goals., • Serve as the chief liaison to brokers, developers, property owners, civic partners, and investors., • Produce and present the Downtown Office Market Report, KPI dashboards, and market profiles., • Conduct blight and vacancy surveys; track and visualize downtown performance indicators., • Identify and advocate for reforms to anti-urban policies; promote pro-downtown initiatives and incentives., • Attend evening or weekend meetings and public forums as needed., • Speak at community events and civic clubs to build awareness., • Bachelor's degree in Urban Planning, Real Estate, Public Policy, Economics, Business, or related field, • 5-8 years of experience in economic development, urbanism, real estate, or a comparable strategic role, • Proven success in managing development projects, incentive programs, and public-private partnerships, • Experience in historic development, architectural knowledge, or adaptive reuse preferred, • Strong public speaking skills, including comfort with media interviews, conferences, and presentations, • Strong knowledge of municipal processes, land use policy, and downtown revitalization, • Advanced skills in Excel/Google Sheets, Tableau, GIS (ArcGIS/QGIS), and CRM systems, • Salary: $75,000 - $95,000 depending on experience, • Comprehensive health, dental, and vision insurance, • 401(k) with employer match, • Paid time off and holidays

Job DescriptionPosition Overview Thompson Engineering is seeking a Structural Engineer to join our team in Mobile, Alabama. This role involves leading and coordinating structural engineering projects that significantly impact organizational programs. The successful candidate will have full technical responsibility for interpreting, organizing, and executing complex assignments, while contributing innovative solutions and maintaining strong client and team relationships. The position requires independent decision-making, advanced technical knowledge, and the ability to collaborate across disciplines. This is an excellent opportunity for a highly experienced engineer to play a pivotal role in shaping critical infrastructure projects across the Southeast. Key Responsibilities * Ensure all engineering work meets established technical standards and adheres to best practices. * Lead and coordinate preliminary design studies, project layouts, and comprehensive planning activities. * Collaborate with clients, engineers, architects, and vendors to develop practical and cost-effective design solutions. * Develop detailed design criteria, select appropriate materials, and specify equipment in line with engineering standards. * Prepare and manage accurate estimates, construction drawings, specifications, and resource plans. * Conduct and review detailed engineering designs, ensuring compliance with codes, regulations, and client requirements. * Lead, supervise, and check the work of team members including engineers, designers, drafters, and technicians. * Coordinate effectively with other departments such as purchasing, estimating, and project management. * Manage project schedules, budgets, and personnel to deliver work on time and within scope. * Act as Engineer of Record for structural engineering projects. * Support business development by marketing services to current and potential clients, contributing to proposals, and maintaining updated professional profiles. * Promote and follow company safety and quality standards. * Serve as the lead structural engineer on multi-disciplinary projects. * Maintain reliable and consistent attendance. Qualifications * Education: * Bachelor's degree in Engineering from an accredited institution. * Note: Candidates who have passed the PE registration exam may be exempt from the degree requirement. * Licensure: * Registered Professional Engineer (PE) required. * Structural Engineer (SE) license is a plus. * Experience: * Minimum of 10+ years of relevant structural engineering experience. * Skills: * Demonstrated ability to manage large-scale engineering projects. * Strong written and verbal communication skills. Physical Requirements * Willingness to work flexible hours and overtime as needed. * Ability to sit for extended periods and operate a computer. About Thompson Engineering Founded in 1953, Thompson Engineering began as a provider of construction quality assurance, including materials testing, inspection services, and laboratory analysis for industrial and infrastructure projects. Our early work along the Gulf Coast laid the foundation for decades of technical excellence. Today, we are recognized as a leader in engineering, design, and construction services for projects that define skylines, coastlines, and transportation corridors. From environmental assessments to land surveying, geotechnical engineering, and full-scale project management, we deliver innovative solutions for public and private sector clients. We proudly support projects across industrial, commercial, transportation, federal, and municipal markets, consistently driving excellence from concept to completion.

Job DescriptionDescription:Are you looking to join an organization that has a GREAT company culture?Do you want to work in a place that is making a DIFFERENCE in the life of the communities they serve?If so, then stop scrolling and APPLY TODAY to join our family at BDI!We believe that employees are the backbone of our success, and we want YOU to be part of our dynamic team! SUMMARY: Baskerville-Donovan, Inc. is hiring a Civil Engineer (PE) to join our growing team of professionals in our Mobile, AL office. Under the direction of the Federal Market Director, this candidate would be responsible for assisting in the design, development, implementation and analysis of civil engineering projects primarily related to federal infrastructure programs with the US Army Corp of Engineers. A successful candidate can expect to perform site investigations, engineering evaluations, and design related to projects awarded to Baskerville-Donovan. This is a highly strategic career opportunity for a candidate with the enthusiasm and motivation to join a multi-discipline team with a primary focus on delivery of innovative, infrastructure solutions for federal civil projects. ESSENTIAL JOB RESPONSIBILITIES: • Desire to Make a Difference in the life of the communities we serve., • Technical skills in stormwater pond design, drainage, collection, and conveyance., • Technical skills in water/wastewater systems., • Technical skills in site and transportation design., • Experience with jurisdictional agencies in determining permit requirements and preparation of permit applications and supporting documentation., • Works collaboratively with a team of engineers and support staff., • Preparation of technical reports, specifications, etc. as requested by management and/or clients., • Excellent written and verbal communication is required., • Strong desire to build strong client relationships., • B.S. in Civil Engineering (From an ABET accredited engineering program)., • 5-10 years of experience in the civil engineering industry or related field., • Group Health Insurance: BCBS of AL, • Dental and Vision Insurance: Florida Combined Life & Blue Vision (Davis), • HRA: Pre-tax savings account for Health expenses with generous employer contributions., • FSA: Pre-tax savings account for Health, Dental, Vision, or Over the Counter Medical Items, • Employer paid Life and AD&D, STD & LTD: USAble Life, • Supplemental Voluntary Life Insurance: USAble Life, • Employer paid Teladoc services: Talk to a Board-Certified Doctor 24/7 with no co-pay or fee, • Accident, Critical Illness, Cancer, & Hospital Choice: Aflac-Work with amazing Aflac reps that help employees file claims, • 401(k): BDI matches 100% of the employees' contribution up to 4%, • Paid Time Off (PTO): 17.87 days your first year. Increases with tenure., • 8 paid Holidays, • Flexible and Family First Workplace, • Tuition Reimbursement, • Professional Development Opportunities, • Corporate Fitness & Wellness Program: Up to $45 gym membership reimbursement & Track your Miles award program, • Employee Assistance Program (EAP): Lucet offers services and resources i.e. Counseling, Legal & Financial, Work/Life and Coaching, • Employee Appreciation & Recognition Program: Celebrate anniversaries and national employee group days, • Support local non-profits: Host fundraising events throughout the year as well as donation drives ABOUT US: At Baskerville-Donovan, Inc., we make a difference in the life of the communities we serve by elevating the places where we live, work, and play. Our purpose as an organization is creating community, where we make deeper connections with clients and help build up communities, making the world a better place, project by project. BDI provides planning, surveying, engineering and design, and construction phase services for infrastructure projects in the United States. The company offers water resources engineering services, including wastewater treatment and collection systems design, water supply and treatment systems design, water distribution systems design and permitting, pipeline design, pump station design and rehabilitation, feasibility studies and planning, construction administration, and environmental permitting. It also provides transportation engineering services, including transportation planning, highway engineering, airfield design, traffic engineering, highway lighting, surveying and mapping, bridge design, storm water design, environmental permitting, real property support, construction administration, and public involvement. In addition, the company offers civil engineering, land surveying and mapping, and funding assistance services. DRUG-FREE WORKPLACE/BACKGROUND CHECK: BDI is a Drug-Free Workplace. All job applicants will undergo a pre-employment drug screening for the presence of illegal drugs as a condition of employment. This includes marijuana (medical or recreational) due to the services we provide to federal contracts and projects, like the Department of Defense. Employment is also contingent on a pre-employment criminal background screening. EEO/AA EMPLOYER/VET/DISABLED: Baskerville-Donovan, Inc. is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identify, status as a protected veteran, among other things or status as a qualified individual with disability.

Job Description Thompson Engineering is looking for a CEI Inspector in the Mobile, AL area. CEI Inspectors follow standard procedures in documenting construction projects and inspecting job activities to verify they are in compliance with project plans and specifications. The inspector will be responsible for completing a daily report documenting the labor and equipment used by the contractor to include a description of the work performed and any pertinent conversations with the contractor. The inspector will assist with office work such as plotting cross-sections and computing earthwork quantities. The inspector will report directly to the Senior Inspector and/or the Project Manager. DUTIES 1. Inspect work in progress to ensure conformance with plans and specifications., 2. Inspect workmanship of finished installations for conformity to standards., 3. Maintains required reports of construction inspection activities., 4. Prepares sketches of construction installations that deviate from plans and incorporates changes into master plans., 5. Inspects and test materials incorporated into the project., 6. Drive company vehicle safely to and from worksites, 7. Maintains required reports of construction inspection activities., 8. Conduct all work activities in compliance with Thompson Holdings, Inc. Health, Safety & Environmental Management System, safety policies & procedures, safety execution plans and Job Safety and Environmental Analyses., 9. Attend and pro-actively participate in monthly safety meetings, project toolbox safety meetings and safety moments., 10. Ensures regular and on time attendance., 11. Other duties as required. QUALIFICATIONS Minimum Requirements 1. High school diploma or equivalent, 2. Valid Driver's License, 3. Intermediate math and geometry skills in order to calculate areas, volume, etc., 4. Background in survey preferred Physical Requirements 1. Ability to work in the outside elements of the field up to 100% of the time, 2. Must be able to lift a minimum of 50lbs, 3. Required to remain standing for a minimum of eight (8) hours per day, 4. Must be able to bend, stoop and climb on a ladder, 5. Must be able to communicate verbally and in writing, 6. Must be able to drive a company vehicle to and from work sites., 7. Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel About Us Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Thompson Engineering has a full-time opportunity for a Survey Instrument Technician. The Surveyor Instrument Technician provides support to the Surveyor Party Chief in the daily responsibilities of the land surveying department. This position is responsible for collecting survey data using designated survey equipment. Ideal candidates must be willing to travel to support project needs. Duties: • Operates total station, digital and automatic level, Topcon data collector, TDS software., • Collect data for field level notes which is reported to the Surveyor Party Chief., • Assist in loading and unloading survey equipment from the company vehicle., • Ability to travel and stay overnight based on the workload of the Survey Department., • Conduct all work activities in compliance with Thompson Holdings, Inc. Health, Safety & Environmental Management System, safety policies & procedures, safety execution plans and Job Safety and Environmental Analyses., • Attend and pro-actively participate in monthly safety meetings, project toolbox safety meetings and safety moments., • On time and consistent attendance is required. Minimum Requirements • Five (5) years verifiable experience in surveying commercial and/or heavy industrial construction stakeout., • Must have working knowledge of GPS software using the Topcon Hyperlite., • High school diploma or equivalent., • Must have a valid Driver's License, • Must have a TWIC card, • Be able to read and comprehend measurements., • Intermediate math skills which include trigonometry and coordinate geometry., • Must be able to communicate effectively with others., • Must be able to understand and follow verbal and written instructions., • Ability to travel and stay overnight based on the workload of the Survey Department Physical Requirements • Ability to work in the outside elements of the field up to 100% of the time., • Must be able to lift a minimum of 50lbs., • Required to remain standing for a minimum of eight (8) hours per day and walk long distances., • Must be able to bend, stoop and climb on a ladder., • Must be able to drive a company vehicle to and from job sites. About Thompson Engineering Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Thompson Engineering has an immediate opening for a Transportation Project Engineer to join our growing team in one of our offices located in Mobile, Daphne or Orange Beach, AL. Enhance your engineering career with a company that aspires to be the firm of choice by driving success with our clients, employees, and communities. At Thompson Engineering, we offer a wide range of services to a growing list of clients across multiple markets throughout the Southeast. At Thompson, we aim to make the communities we live and work in better by providing our services in alignment with our core values: integrity, safety, performance, ownership, teamwork, innovation & entrepreneurial spirit, and professionalism. We have a work environment and company culture that allows self-driven engineers to gain valuable experiences and develop technical proficiencies needed for a successful and rewarding career. As an employee-owned company, we also seek to offer competitive compensation packages and employee benefits. Description This position is for an aspiring and motivated engineer with 5-10 years' of roadway design experience on local and/or state transportation projects and is seeking opportunities for growth into a project engineer position. The ideal candidate will exhibit qualities needed to assume a lead design role on road and bridge projects. This position requires knowledge of all aspects of geometric roadway and roadside design needed for the development of roadway plans for state and local clients in Alabama. Immediate benefits of this position include offering interested candidates the opportunity to develop client relationships and represent the company in professional trade organizations. Long-term benefits of this position may include growth opportunities into a senior management position overseeing and developing other engineers and managing multiple projects. We have a multi-disciplined team of engineers, surveyors, and environmental scientists which this position will coordinate and communicate with regularly. Your Role As a transportation project engineer, you will work closely with team leaders and support staff to perform a variety of tasks needed to produce quality designs and plans on road and bridge projects throughout the Southeast. Regular duties will include the following: • Preparing preliminary design studies, project planning, and related activities that lead to the design of a project., • Preparing project specifications, cost and material estimates, reports, and engineering studies., • Preparing design, detail, and layout drawings and design sketches., • Planning and adhering to task and submittal schedules and project budgets to ensure timely and cost-effective completion of projects, • Following company policies and procedures regarding safety and quality. Minimum Requirements • A bachelor's degree in civil engineering, • 5-10 years' experience, • Alabama PE, or ability to obtain such, required, • Proven experience with ALDOT design methods, plan preparation, standards and specifications required, • Proficient with MicroStation, InRoads, and other related Bentley products, • Knowledge of OpenRoads is desired, • Knowledge of drainage design and applicable software is a must, • Ability to manage client expectations, project schedules and budgets, • Ability to mentor and train entry-level engineers, • Ability to communicate clearly, both oral and written Physical Requirements • Must be willing to work flexible schedules and overtime as needed by the department needs., • Must be able to operate a computer and sit for long periods of time., • Ability to wear appropriate PPE for hazardous materials. Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Thompson Engineering has a full time opportunity for a Survey Party Chief. The Surveyor Party Chief oversees the survey crew in the daily responsibilities of the land surveying department. This position is responsible for reporting survey data to the Survey Team Manager. Ideal candidates would need to travel to support various project needs. Duties: • Oversees the daily functions of the survey crew, • Responsible for the set up and completion of the survey crew on job sites under the direct supervision of the Professional Land Surveyor and/or job supervisor, • Ensures the proper reporting of daily work logs to the Org Manager, • Reduces survey data to the Org Manager, • Interprets blueprints/plans/deeds in order to effectively lead the survey crew, • Drives company vehicle to and from job sites, • Operates all survey equipment and interprets data in order to report information to the Org Manager, • Understand and compute field calculations relative to the survey data collected, • Effectively manage the time and schedules of the survey crew, • On time and consistent attendance is required Minimum Requirements • Five (5) years verifiable experience in running a crew in surveying commercial and/or heavy industrial construction stakeout., • High school diploma or equivalent., • Must have a valid Driver's License, • Be able to read and comprehend measurements., • Intermediate math skills which include trigonometry and coordinate geometry., • Must be able to communicate effectively with others., • .Ability to travel and stay overnight based on the work load of the Survey Department Physical Requirements: • Ability to work in the outside elements of the field up to 100% of the time., • Must be able to lift a minimum of 50lbs., • Required to remain standing for a minimum of eight (8) hours per day and walk long distances., • Must be able to bend, stoop and climb on a ladder. Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required. About Thompson Engineering Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet -literally- performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Thompson Engineering is looking for qualified Construction Materials Testing (CMT) Technicians for various locations. This position is responsible for the daily oversight of the construction materials testing and inspection on construction sites to ensure specified standards of quality are met. Preferred candidates would need to be open to travel to various jobs sites and locations as required. DUTIES 1. Utilize a 40 lb. nuclear gauge to run tests on construction materials, 2. Obtain concrete samples from the ready mix trucks, 3. Make concrete test cylinders, 4. Run tests on concrete samples and deliver the samples to the laboratory, 5. Observe and record construction crew performance data for related activities, 6. Perform visual inspection of rebar, 7. Obtain and deliver soil samples from the jobsite to the laboratory, 8. Interact with clients and contractors in a professional and ethical manner 10.Ensure that standards for quality and quantity of work are implemented on all work assignment 11.Establish and maintain a daily diary of all field activities for each project 12.Submit daily reports and other documentation to the Team Leader as required by project specifications and/or applicable criteria 13.Perform all tasks assigned in a professional and ethical manner and according to company policies and procedures 14.Report to the Team Leader corrective actions (when necessary) to best ensure that the quality of work is maintained and meets company standards 15.Follow all written procedures for work being performed 16.Proactively review all project documents and testing procedures, and exhibit comprehension for the technical requirements and procedures necessary to perform the assigned work 17.Prepare reports and perform field activities in a timely manner Other Responsibilities 1. Establish personal goals for improving job performance, 2. Ensures on time and regular attendance, 4. Other duties as required QUALIFICATIONS Minimum Requirements 1. High school diploma or equivalent, 2. Six (6) months of experience in construction material testing, 3. ACI Level I Certification (must be able to obtain), 4. Nuclear Gauge Certification, 5. Communicate effectively with others written and verbally, 6. Valid driver's license, 7. Ability to read and write in English, 8. Preferred candidates will demonstrate flexibility and a willingness to travel to various job sites and locations as required, 9. Level and compensation will be commensurate with experience. Physical Requirements 2. Ability to lift and carry a minimum of 50 lbs., 3. Drive a company vehicle in a safe manner, 4. Pull or push 400 lbs. in a wheelbarrow, 5. Walk, stoop, bend, and climb up and down stairs and ladders, 7. Work in high grounds and high open buildings, 8. Work for extended periods outside in the heat and cold, 9. Ability to wear appropriate PPE for hazardous materials About Thompson Engineering Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description The Civil Engineering Associate (EA) I & II is an entry level position up through 4 years of professional work experience. The EA Performs assignments designed to develop professional work knowledge and abilities, requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related engineering tasks. Limited exercise of judgment is required on details of work and in making preliminary selections and adaptations of engineering alternatives. DUTIES 1. Learning what constitutes good engineering practice and applying it to his/her work., 2. Using computers, handbooks, drawing instruments, etc., 3. Performing basic design calculations within his/her discipline., 4. Performing neat, accurate, and productive work., 5. Assisting in preliminary design studies, project planning, and related activities that lead to the design of a project., 6. Assisting in the preparation of specifications, cost and material estimates, reports, and engineering studies., 7. Preparing design, detail, and layout drawings and design sketches., 8. Checking designs prepared by others., 9. Utilizing computers and CAD in the design effort., 10. Recognizing his/her limitations and asking for help when needed., 11. Following company policies and procedures regarding safety and quality. QUALIFICATIONS Minimum Requirements 1. A bachelor's degree in engineering from an accredited institution., 2. EIT is preferred., 3. The ability to express ideas clearly and concisely, both orally and in writing. Physical Requirements 1. Must be willing to work flexible schedules, overtime and overnight travel as needed by the department needs., 2. Must be able to operate a computer and sit for long periods of time., 3. Ability to work in the field or outside elements and walk on even/unstable surfaces, concrete, grass, dirt, gravel., 4. Must have a valid drivers' license and be able to travel out of town as needed. About Us: Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet literally performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Are we the road to your future? We are currently searching for a Traffic EIT to support our East Gulf Region located in Birmingham, Huntsville, Mobile, Montgomery, or Tuscaloosa, AL. Candidates must be willing to relocate to Alabama if out of state. What you’ll be doing: • Assist with preparation of technical reports for traffic impact studies, interchange access requests, or safety studies, • Assist with development of traffic impact studies, land use planning, master plan studies, traffic signal warrant studies, bikeway planning and design, community and campus planning, technical report writing, • Work on temporary traffic control plan/traffic management plan (TMP) and signing, pavement marking plans, • Work on traffic signal design plans for new intersections and signal modifications to facilitate multimodal accommodations, • Assist in preparing conceptual intersection layouts, schematics, signal timings and engineering reports, • Assist with and prepare roadway design plans, • Attend project meetings with clients, • Learn project budgets to meet financial metrics, • Potential to learn and participate in business development activities, • Performs other duties as assigned What you need to have: • BS in Civil Engineering, • Recent college graduates encouraged to apply, • EIT (E.I) Certification is desired but not required, • 0 - 4 years of experience, • Experience with transportation planning, including comprehensive corridor analysis, local programs, public involvement, safety and access, pedestrian and bicycle planning, multimodal planning and traffic operations are desired but not required, • Familiarity with DOT traffic design standards, MUTCD and AASHTO, • Familiarity with traffic analyses software such as VISSIM, Synchro/Simtraffic, Sidra Intersection, HCS are desired but not required, • Familiarity with OpenRoads Designer is desired but not required, • Self-starter and capable of completing tasks with minimal oversight, • Ability to communicate effectively, both orally and written, • Willingness and motivation to curate and eventually develop personal client base, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1

Job Description Thompson Engineering is looking for a Driller Assistant, willing to travel, but based in our Mobile, AL office. The Driller Assistant is responsible for assisting the Driller, other Driller Assistants, Soil Technicians and Project Engineers with the daily functions of geotechnical (with occasional environmental) drilling operations for both onshore and offshore project assignments. Essential Functions of the Position 1. Perform variety of drilling duties handling drill rods, wrenches and other tools behind the drill rig equipment, 2. Responsible for loading and unloading drilling equipment in and out of the company vehicles and trailers, 3. Drives company vehicle to and from work sites, 4. On time and consistent attendance, 5. Picks up sacks filled with mud and empties the mud into the mixer container, 6. Monitors the fluid properties of the drilling fluids (mud), 7. Equipment repairs and maintenance in the field and at shop Other Responsibilities 1. Follow safety procedures, 2. Follow quality procedures, 3. Other duties as required Minimum Requirements 1. High School diploma or equivalent, 2. Must be able to follow verbal and written instructions, 3. Valid Driver's License required, 4. Commercial Driver's License (CDL) preferred, 5. Mechanical aptitude; past experience with working with mechanical systems of some type, 6. Past experience with working with hydraulic systems of some type preferred, 7. Ability to work on both onshore and offshore project assignments for extended periods of time as may be required for the projects Physical Requirements 1. Ability to work in the field or outside 12 months of the year up to 100% of scheduled work hours, 2. Required to be standing or walking for up to 12 hours per work day and walk on uneven/unstable surfaces, concrete, grass, dirt, gravel, 3. Must be able to bend, stoop and climb, 4. Must be able to communicate verbally, 5. Required to be able to lift up to 100 lb. sacks of materials, 6. Ability to manipulate with hands to screw and unscrew equipment, operate tools and machinery, 7. Ability to travel and stay overnight on out of town assignments, and work flexible schedules including overtime based on the drilling work load About Us: Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen, physical and motor vehicle record checks are required.

Job Description Thompson Engineering is looking for a Geotechnical Engineering intern in our Mobile, AL office. The Thompson Internship Program is an 8-12 week program for college students (working towards a degree in Civil, Geotechnical, Structural, or Environmental Engineering) to learn and gain professional work experience. The intern program is designed to develop professional work knowledge and abilities, requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related tasks relevant to their field of study. Limited exercise of judgment is required on details of work and in making preliminary selections and adaptations of alternatives. DUTIES • Learning what constitutes best management practices and applying it to his/her work., • Using computers, handbooks, drawing instruments, etc., • Performing basic design calculations within his/her discipline., • Performing neat, accurate, and productive work., • Assisting in preliminary design studies, project planning, and related activities that lead to the design of a project., • Assisting in the preparation of specifications, cost and material estimates, reports, and studies., • Preparing design, detail, and layout drawings and design sketches., • Checking designs prepared by others., • Utilizing computers and CAD in the design effort., • Recognizing his/her limitations and asking for help when needed., • Following company policies and procedures regarding safety and quality. Minimum Requirements • Must have completed sophomore year working towards a degree in Civil, Geotechnical, Structural, or Environmental Engineering., • EIT is preferred, • Must be willing to work flexible schedules and overtime if required., • Must be able to operate a computer and sit for long periods of time. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Thompson Engineering is looking for a qualified Project Geotechnical Engineer. Project-Level Geotechnical Engineer Overview The Project-Level Geotechnical Engineer is responsible for performing geotechnical engineering analyses and managing projects of varying scope and scale under the guidance of a Senior or Principal Engineer. This role supports transportation, heavy industrial, and infrastructure projects. Key duties include proposal preparation, fieldwork, engineering calculations, coordination of field and laboratory tasks, client interaction, and general civil engineering support. Key Responsibilities Technical & Field Duties * Perform and/or lead field drilling services and associated engineering analysis and calculations * Prepare geotechnical recommendations, designs, plans, and specifications * Conduct observation and inspection services * Write, prepare, and review related technical reports * Perform field work including: * Logging borings * Supporting cone penetration testing (CPT) operations * Performing geotechnical field testing * Working alongside drill rigs and drilling crews, and/or on active construction sites related to Construction Materials Testing (CMT) services Project Management & Coordination * Review construction drawings for compliance with plans and specifications * Prepare proposals and cost estimates * Track and evaluate project budgets and progress; recommend changes as needed * Assign, review, and evaluate laboratory or field data for inclusion in reports Design & Engineering * Research and resolve design and construction problems * Assist with the initial design and investigative approach for major project phases * Apply sound engineering principles and communicate technical concepts to both technical and non-technical stakeholders * Plan, schedule, and coordinate engineering tasks involving both conventional and complex design requirements Leadership & Oversight * Provide technical review and direction for complex investigations * Supervise analysis and ensure findings and recommendations are clearly formulated in client reports * Review and approve engineering documents and technical deliverables Qualifications Minimum Requirements * Bachelor's degree in Engineering (Master's degree preferred) from an ABET/EAC-accredited program * 0-5 years of experience in Geotechnical Engineering * Ability to lift 50 lbs * Willingness and ability to travel Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Thompson Engineering is currently seeking a Construction Engineering & Inspection (CEI) Project Manager for the Quality Acceptance Team on the West Alabama Highway Design Build Project. This progressive design-build project includes the widening of rural highways 43 and 69 from two lanes to a four-lane divided highway as well as the addition of new bypasses along the 74-mile route from Thomasville to Tuscaloosa, Alabama. Along with the widening and bypass construction, the project will involve construction of 23 new bridges, drainage, land clearing and grubbing, relocation of utilities, and the installation of over 100 box culverts. The project will be divided into 13 segments, each averaging 5.7 miles in length. The Project Manager will support as the point of contact between the Design Build/Quality Acceptance Team and the Owner Verification Team on one or multiple segments of the project. Key Responsibilities • Coordinate and supervise quality acceptance inspection staff performing field inspections, observations and testing of contractor activities to verify compliance with project plans, specifications, technical provisions and procedures., • Direct and assign inspection and testing tasks to field staff to meet minimum requirements for the project., • Notify Contractor and Owner of nonconformances and assist in corrective action plan., • Represents Thompson Engineering and interacts in a professional manner with client, teaming partner firms and contractor representatives., • Ten years of experience in construction inspection, surveying or highway materials testing or, • Five years of the above experience with a Bachelor of Science degree in Civil Engineering or Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Thompson Engineering has a full-time opportunity for a Survey Rodman. The Surveyor Rodman provides support to the Surveyor Party Chief in the daily responsibilities of the land surveying department. This position is responsible for collecting survey data using designated survey equipment. The ideal candidate must be willing to travel and support project needs. Duties: • Operates total station, digital and automatic level, Topcon data collector, TDS software., • Collect data for field level notes which is reported to the Surveyor Party Chief., • Assist in loading and unloading survey equipment from the company vehicle., • Ability to travel and stay overnight based on the workload of the Survey Department., • Conduct all work activities in compliance with Thompson Holdings, Inc. Health, Safety & Environmental Management System, safety policies & procedures, safety execution plans and Job Safety and Environmental Analyses., • Attend and pro-actively participate in monthly safety meetings, project toolbox safety meetings and safety moments., • On time and consistent attendance is required. Minimum Requirements • High school diploma or equivalent, • Ability to read and comprehend simple measurements, • Basic math skills which include adding and subtracting numbers, • Ability to communicate effectively with others, • Must be able to understand and follow verbal and written instructions Physical Requirements • Ability to work in the outside elements of the field up to 100% of the time., • Must be able to lift a minimum of 50lbs., • Required to remain standing for a minimum of eight (8) hours per day and walk long distances., • Must be able to bend, stoop and climb on a ladder., • Must be able to drive a company vehicle to and from job sites., • Must be able to travel to support project needs (when necessary) About Thompson Engineering Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet-literally-performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Thompson Engineering is seeking an experienced and detail-oriented Senior CAD Designer II to join our dynamic team. The ideal candidate will be responsible for preparing complex design and drafting assignments using advanced CAD software to support civil, structural, environmental, or multidisciplinary engineering projects. This position requires a proactive, technically skilled professional who thrives in a collaborative environment and is committed to delivering quality and precision in every project. Essential Functions of the Position • Excellent attention to detail and organizational skills., • Experience in mentoring or leading design teams., • Familiarity with BIM workflows and 3D modeling best practices., • Working knowledge of DOT or other public-sector design requirements., • Must be willing to work overtime as needed by the department needs., • Must be able to operate a computer and sit for long periods of time. Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.