Maintenance technician jobs in Pueblo, ColoradoCreate job alerts

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Obtain and maintain OSHA 10 and equipment certifications, as required Requirements • Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred, • Valid Colorado's license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. • $38.25 to $45.00 per hour depending on experience, • Shift differential #TAH Open & Closing Dates: 8/1/2025 - 12/1/2025 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking a Mill Mechanical Technician Assistant to join our team at our plant located in Pueblo, Colorado. The Mill Mechanical Technician (MMT) Assistant will provide all necessary mechanical maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • Serve the function(s) of a Boilermaker, Millwright, Pipefitter, and Welder, • Complete the RMSM training program to become skilled in all four of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with prints and drawings, machines, production and mobile equipment, structures, systems and other tools as appropriate, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Operation of overhead cranes, • Attend courses and assessments to become skilled in one of the three crafts, as defined by the training program, • Associates Degree or 2 years of experience in applicable field, • Valid Colorado's license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 50 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Open & Closing Dates: 8/1/2025 - 12/1/2025 • $29.07 per hour, • Shift differential Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • $32.51 - Mill Electrical Technician - Trainee - must have the equivalence in one of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $35.19 - Mill Electrical Technician - Starter - must have the equivalence in two of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $38.25 to $45.00 per hour depending on experience - Mill Electrical Technician - Standard - must possess an electrical journeyman license or equivalent education/experience., • Relocation Assistance available between $5,000- $10,000 depending on location, • Shift differential, • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred, • Valid Colorado license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 12/1/2025 The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • $32.51 - Mill Electrical Technician - Trainee - must have the equivalence in one of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $35.19 - Mill Electrical Technician - Starter - must have the equivalence in two of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $ 38.25 to $45.00 per hour depending on experience - Mill Electrical Technician - Standard - must posses an electrical journeyman license or equivalent education/experience., • Relocation Assistance available between $5,000- $10,000 depending on location, • Shift differential, • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred, • Valid Colorado license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 12/1/2025 The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking a Mill Electrical Technician Assistant to join our team at our plant located in Pueblo, Colorado. The Mill Electrical Technician (MET) Assistant will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Operation of overhead cranes, • Attend courses and assessments to become skilled in one of the three crafts, as defined by the training program, • Obtain and maintain OSHA 10 and equipment certifications, as required Requirements • Associates Degree or 2 years of experience in applicable field, • Valid Colorado's license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 12/1/2025 The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Compensation • $29.07 per hour, • Shift differential Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking a Mill Mechanical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Mechanical Technician (MMT), you will provide all necessary mechanical maintenance to all areas of the Mill in a safe and efficient manner. You will be responsible for Mechanical maintenance, installation, repair, assembly or dismantling of mechanical equipment such as gear boxes, hydraulic/pneumatic systems, pumps, packings, seals, piping and valves, mechanical power transmission and drive systems, couplings, shaft alignments, lubricants, overhead cranes and other heavy industrial equipment. You will trouble shoot, determine and obtain parts, and make necessary repairs to Mill Machinery. This position reports to the Superintendent of Maintenance. • Serve the function(s) of a Boilermaker, Millwright, Pipefitter and Welder depending upon training and certification, • Complete the training program to become skilled in all four of the crafts mentioned above, • Take control of any situation to install, repair, assemble or dismantle anything in the Mill, • Work with all Shops machines and equipment, mobile equipment of every kind, all structures, production equipment, systems, appropriate hand, power and measuring tools, prints and drawings and necessary safety equipment, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Obtain and maintain OSHA 10 and equipment certifications, as required Requirements • Must have completed or have the equivalence of a craft apprenticeship in one of the following four crafts: Boilermaker, Millwright, Pipefitter and Welder, • Strong background in hydraulic/pneumatic troubleshooting and repair skills, • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, equipment operation or a closely related field preferred, • Must be able to read, understand and work from Mechanical Prints, drawings and schematics, • Strong troubleshooting, repair and installation skills, • Must have a valid Colorado driver's license and a mobile equipment qualification., • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to constantly exert forces up to 50 pounds and frequently exert forces up to 100 pounds to lift, carry, push and pull, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. • up to 45.00 per hour depending on experience, • Open & Closing Dates: 8/1/2025 - 12/1/2025, • Shift differential Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Responsibilities As a Quality Assurance Technician, you will verify product conformance to Rocky Mountain Steel Mills standard requirements and customer specifications using non-destructive testing methods, gauges, and visual inspection. You will investigate routine metallurgical problems, determine compliance with specifications and evaluate products utilizing microscope, hardness, and tensile machines. You will prepare samples using lathes grinders, cut-off machines, power saws, drill presses, milling and turning machines, polishing equipment, and measuring tools. You will work with various measuring devices, hand tools, materials, supplies, equipment, and necessary safety equipment. The ideal candidate will demonstrate a high regard for safety. • Measure and visually inspect for adherence to process sheets, standard practices and specifications, • Verify, audit, identify and record product and equipment, • Review process sheets for customer order requirements, • Operates all equipment needed to complete the job which may include grinders, cutting torch, gauges, mobile equipment, and robotics, • Assist operators in change overs, • Reject, determine, disposition, sort and identify product, • Prepare necessary reports, records and counts for traceability and inventory purpose, • Keeps work area and equipment clean and orderly, • Perform duties as needed in keeping mill operational, including routine maintenance and assists Maintenance personnel, • Adhere to all appropriate Standard Operating Procedures, • Utilize necessary safety equipment and observe all safety rules and lock out procedures Job Requirements • Possess an understanding of the basic manufacturing process and familiarity with heavy industry, manufacturing, or mining; or a closely related field, • Competent in manipulating numbers, quantities, shapes and spaces; able to take simple measurements and perform basic mathematical operations (e.g., addition, subtraction, division, decimals, fractions), • Ability to accurately read precision measurement tools, experience with gauges, micrometers, NDT flaw detectors and machine shop equipment, • Qualified Level I non-destructive testing background or equivalent preferred, • Quality control experience in a manufacturing and metallurgical background; knowledge of ISO standards, preferred, • Must meet and maintain Inspector entry level qualifications concerning literacy, experience, training, testing, courses and certification, • Ability to safely and appropriately operate, power and hand tools, machinery, and mobile equipment; 12 months experience preferred, • Obtain and maintain safety and equipment certifications, as required, • Ability to convey and understand information effectively and safely, including speaking over a public address system, • Ability to work in both inside and outside environmental conditions, with exposure to elevated noise levels, extreme heat and cold, physical hazards - close proximity to moving parts, hot surfaces, pinch points, sparks, sharp edges, high pressure air, oxygen and gas lines (atmospheric conditions may require the use of a respirator), • Must be able to work in a physically demanding manufacturing environment, which will include but not be limited to repetition, climbing, kneeling, standing, crawling, consistent exertion of forces up to 50 pounds or more, • Valid driver's license preferred - required for certain positions within the scope of Quality Assurance, • Must be willing to work varied shifts (3 shift rotation) and any days of the week, • Must be 18 years of age, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be constructed as a detailed description of all of the work requirements that may be inherent in the job. Compensation • $28.35 per hour, • Shift differential Open & Closing Dates: 8/1/25 - 12/1/25 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job Description We are currently seeking a Mid-level Automotive Technician to join our high-volume, full-service automotive repair center. The ideal candidate will be able to work efficiently in a fast-paced environment, possess their own comprehensive set of tools, and take pride in delivering quality and timely work. Our technicians' weekly pay is uncapped, with top performers earning over $80K annually! We provide a clean, modern and safe workspace equipped with state-of-the-art tools, a steady flow of customers, and the chance to work alongside skilled Store Managers. We’re looking for a dedicated professional who is serious about earning competitive wages and becoming a long-term member of our dynamic team. Responsibilities: • Perform routine vehicle maintenance tasks, including oil changes, tire rotations, and brake replacements., • Complete digital inspections to provide to the customer., • Diagnose and repair mechanical and electrical issues., • 2+ years as an Automotive Technician., • Knowledge of vehicle diagnostic systems and methods., • Weekly Guarantee: $750 - $1,000 depending on qualifications, • Commission Potential - $55,000 - $80,000 or more per year, • Benefits include Health Insurance, Dental, 401k plan with company match, PTO based on tenure Job Type: Full-time Pay: $55,000.00 - $80,000.00 per year Benefits: • 401(k), • Employee discount, • Health insurance, • Professional development assistance Work Location: In person

Job DescriptionBenefits: • Bonus based on performance, • Employee discounts, • Free uniforms, • Health insurance ESSENTIAL DUTIES AND RESPONSIBILITIES. • Provide fast and friendly customer service., • Promote sales through explaining benefits of service and products to customers, • Maintain timely and professional communication with management, employees, vendors and customers, • Keep supervisor informed of any maintenance problems and/or any issues that need attention, • Safely operate customer vehicles with automatic and manual transmissions, • Drain oil and change oil filter; lubricate vehicles; install, rotate and balance tires and properly torque wheels; check and fill various fluids; check and replace various filters and lights, • Unload transport trucks and warehouse tires and inspect disposed tires for adjustment, • Maintain a clean environment, tools and equipment, using company guidelines, • Know and adhere to company policies and procedures, • Utilize and perform all duties on the company checklists to meet consistent adherence to policies, procedures and expectationsQUALIFICATIONS, • Previous Experience (required), • ASE Certification, • Your own tools (required), • Availability to work holidays, weekends, and after regular business hours as needed, • Reliable transportation to work, • Ability to learn new concepts and use technical materials, • Ability to consistently operate a computer and other office productivity machinery, • Capability to safely operate automatic and manual transmission vehicles, • Willingness to work with hazardous materials and in outdoor weather conditions, • Complies with Personal Protection Equipment (PPE) regulations, • Ability to remain in a stationary position (standing and/or driving) for up to nine hours per shift, • Ability to move and lift up to 75 pounds, • Ability to meet company requirements including successful pre-employment drug screening, Motor Vehicle Report (MVR), and criminal background check

Job Description Looking to make a difference in the lives of pets and people? With an almost year-round beautiful blue sky and a scenic mountain backdrop, HSPPR is a nonprofit animal shelter serving El Paso, Pueblo, and Douglas Counties as well as the City of Centennial. We employ a total of 200+ employees. We are an organization that celebrates and prioritizes diversity and inclusion. Job Summary The Animal Care Technician provides care for the daily needs of all animals within the shelter, including maintaining animal enclosures so they are clean and sanitary; ensuring appropriate feeding; identify sick or injured animals; Assisting in the humane euthanasia process; working cohesively with co-workers, other departments and volunteers; and assisting the public in a professional manner. The Animal Care Technician ensures an environment of compassionate and respectful animals and people care in accordance with HSPPR's mission, values, goals, and management philosophy. Key Duties and Responsibilities Daily Animal Care • Adheres to high quality standards of animal care, handling, and sanitation, and performance is consistent with protocols, including but not limited to ensuring that animals are fed according to dietary instructions; cleaning and disinfecting of animal enclosures, dishes and other equipment used; completing laundry duties; assists with the flow and movement of the animal population., • Provide accurate information and professional service to the public., • Assists with the humane euthanasia of animals as well as proper care and disposal of deceased animals., • Responsible for identifying sick or injured animals and reporting such information in a timely manner., • Maintain food storage, chemical storage, laundry room and food prep area in a clean, uncluttered, and sanitary manner., • Maintains and updates animal records in database accordingly., • Assists with maintaining the inventory of animals daily, reporting unresolved discrepancies to supervisor or manager., • Moves animals as appropriate., • Participate in activities to improve the animals' wellbeing while in HSPPR's care., • Performs adoption viewing of animals in accordance with current procedure., • Escort customers through shelter to search for lost pets in accordance with current procedure., • Cultivates and maintains relationships with peers and volunteers., • Communicates issues and concerns to the Animal Care Supervisor., • Communicates effectively with staff and volunteers so pertinent parties are informed of animal care issues/information., • Properly maintains equipment used., • Restocks all supply items daily. Reports need for ordering, maintenance, and inventory of supplies and equipment., • Commitment to the mission, values, goals and success of HSPPR., • Appropriately documents observed animal behaviors utilizing objective language as required in relevant procedures and/or policies., • She employee must regularly lift and/or move 25 or more pounds of moving weight and occasionally lift and/or move up to 40 or more pounds of moving weight with reasonable accommodations., • Occasionally required to climb or balance, stoop, kneel, crouch, crawl, smell, talk, and hear., • Regularly required to stand and walk, expected to be on feet for extended periods of time., • Must be able to use both hands and arms to grip, pull and push utilizing safety equipment such as, but not limited, to catch poles, snappy snares, leashes, ropes, muzzles., • Consistently exposed to animals in the workplace and animal allergens under conditions with limited alternatives available., • Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, and depth perception., • Potential exposure to zoonotic diseases., • Regularly exposed to noise and potential exposure to hazardous weather conditions., • Potential exposure to cleaning supplies and/or other substances containing toxic or caustic chemicals., • Ability to effectively read, write, interpret, communicate, perform basic problem solving, and perform basic math as commonly expected from completion of a High School Diploma or Equivalent Education, • Previous animal shelter, boarding kennel, zookeeping, or veterinary clinic experience desired., • Must be at least 18 years of age. Application Deadline: Friday, October 14, 2025, or until position is filled The Humane Society of the Pikes Peak Region is a Public Service Loan Forgiveness qualified employer. To learn more about this program, go to . The core values of the staff unite us and guide us to provide the best service to the animals in our care, our organization, and our community. Core Values Statements- • Compassion: We believe that animals matter. We are committed to treating animals and people with kindness, respect and compassion., • Stewardship: We are accountable and transparent in our actions and in the use of our resources to build trust in those we serve., • Integrity: We believe we can make the greatest impact by staying true to our mission, always doing what is best for the animals and people of our community, and by standing united in our decisions., • Excellence: We are passionate about our mission, and strive for excellence through continual learning, innovation and the development of our board, staff and volunteers., • Collaboration: We seek strategic partnerships and alliances to advance the welfare and protection of animals and people., • Service: We exist to serve our communities and operate with this commitment to serve as front and center in all we do. As a condition of employment with HSPPR, you will be required to authorize HSPPR and ProScreening to conduct a background check before confirming an employment start date. The background check will include a criminal investigation, verification of citizenship/immigration status, and a motor vehicle record. By applying for this position, you acknowledge and agree that any offers of employment will be contingent upon completion of the background check to the satisfaction of HSPPR. In consideration of any offers of employment made as a result of your interest in this position, by applying for this position, you hereby waive any and all claims that you may have against HSPPR for invasion of privacy in respect to drug testing and background checks as listed above. Job Posted by ApplicantPro

Job DescriptionAre you an experienced maintenance technician with a passion for fixing things? If so we want to hear from you! We’re looking for a reliable maintenance professional who can keep our facilities operating efficiently. You’ll run routine inspections and maintenance and create preventative measures to keep our equipment running smoothly as long as possible and minimize any risk. Jobseekers should be hardworking problem solvers ready to go from day one. Sound like you? Apply today!Compensation: $14.42 - $15 hourly Responsibilities: • Handle additional maintenance tasks as needed, • Develop and execute preventative maintenance measures to keep our equipment operating efficiently and prevent any safety risks, • Keep a record of completed repairs and when equipment was last serviced, • Conduct routine maintenance on equipment and systems such as HVAC units, plumbing fixtures, and electrical wiring to make sure they’re operating efficiently and make any needed repairs, • Check the building for any damage to doors, windows, walls, and make any repairs as neededQualifications:, • Strong understanding of maintenance equipment, techniques and procedures, • Stellar communication skills, attention to detail, and work ethic, • Flexible availability for on-call maintenance requests on nights and weekends, • Must have graduated from high school/received GED or equivalent, • Knowledge of heating and air conditioning units, plumbing systems, and electrical systemsAbout Company Our vision is to be the premier moderately priced hotel chain in the world. This will be accomplished by maintaining competitive superiority through strategic distribution, outstanding product quality, a service culture designed to guarantee 100% customer satisfaction, and a work environment based on the job satisfaction of each of our employees. Success will be measured by maintaining premiums in operating and financial performance, guest ratings, developer/financial community preference, and a reputation as the employer of first choice.

Job Description Part Time Maintenance Technician I - Night Shift (7:00pm - 7:00am Saturday & Sunday) - $28.00/hr. + $1.00/hr. Shift Differential Who we are looking for: We are currently looking for a Part Time Maintenance Technician I - Night Shift (7:00 p.m. to 7:00 a.m. Sat./Sun.) to be based out of Pueblo, Colorado. Reporting to the Maintenance Manager, the Maintenance Technician I will be responsible for maintaining production and quality by ensuring operation of machinery and mechanical/electrical equipment. What you’ll do: Maintenance Technician I’s responsibilities include, but are not limited to: • Follow diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to troubleshooting malfunctions., • Fabricate repair parts by using machine shop tools and equipment., • Follow maintenance schedules and document all maintenance activities accurately., • Conduct routine inspections, lubrication, and calibration of equipment to prevent unplanned downtime., • Perform electronic equipment repair and replace electrical components or defective parts (includes control power, sensors, switches, etc. (120V), • Repair electrical motors, parts, wiring and other electrical devices., • Ability to troubleshoot mechanical systems, determine errors, and replace mechanical components (includes pillow blocks, rotary joints, bearings, chains, etc.), • Perform hydraulic maintenance, including fixing leaks, refill reservoirs, and repair work., • Support Preventive maintenance on boiler, chiller and compressor, • Perform fabrication and welding, • Respond promptly to equipment breakdowns or failures to minimize production downtime., • Perform tool changes on equipment when required., • Work within team environment with minimum supervision., • Exercise judgment and initiative within established guidelines., • Perform inspections of safety devices in facility. (Fire extinguishers, Emergency Lighting), • Minimum educational requirement is high school diploma, or equivalent. A technical certification or degree in maintenance or a related field is a plus. Certification in Maintenance Management, OSHA, or DOT HAZMAT certification is preferred., • Experience and knowledge of Lean Daily Management principles preferred, • Strong mechanical aptitude, • 3 years of proven experience as a Maintenance Technician or in a similar role doing electrical/mechanical maintenance in an industrial/ manufacturing environment., • Strong knowledge of mechanical, electrical, and HVAC systems., • Experience with installation of machinery and equipment as well as disassembly., • Must be adaptable to changes in the work environment, comfortable with multiple competing demands and able to deal with frequent change, delays, or unexpected events in a calm and logical manner., • Must be able to work safely and efficiently in a fast-paced work environment, • Able to lift 50 pounds unassisted, • All associates must embrace and foster an environment that supports our core values of Integrity, Respect, Excellence, Teamwork and Accountability., • Know and follow plant safety rules and Life Savings Rules, understand the Atkore Values, Knowledge of 5s practices, and consistently wear proper PPE., • Complete Lock Out Tag Out and Forklift Training, • Zero safety incidents in past 90 days of evaluation date, • Less than 15 attendance points on the date of evaluation, • Train on plant equipment operation procedures to assist in troubleshooting skills Atkore is a five-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We’re committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $28.00 per hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications accepted through August 13, 2025 or until filled. Apply at .

Job DescriptionDescription: The role of this position is to assist in the Safe operation of the manufacturing process at the plant by participating on a cross functional Team that will be responsible for assuring equipment reliability by performing electrical and mechanical inspections and repairs. KEY RESPONSIBILITIES • Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas., • Operate computerized process control stations which control heavy manufacturing equipment in a minerals processing plant., • Monitor and maintain quality control system and procedures., • Monitoring and observing assigned area for abnormal conditions and emergency situations., • Work and interact with outside contractors, customers, and agencies., • Complete work orders and preventive maintenance routines., • Perform mechanical repairs on equipment including pneumatics, pumps, motors, belts, conveyors, baghouses, mills, mobile equipment, and a variety of other heavy industrial equipment., • Perform electrical repairs on equipment including motors, drives, starters, PLC’s, instrumentation, MCC’s and a variety of other heavy industrial equipment., • Participating in safety reviews and other training activities., • Maintaining proper and safe process operations of the operating equipment, • Perform maintenance related activities including welding, fabrication, housekeeping and other labor-intensive activities., • Complete inspections and report and deviations from standards., • Operate mobile equipment including skid loaders, wheel loaders, fork lifts, lifts and other heavy manufacturing mobile equipment., • Upholding company values, understanding and implementing all relevant company policies and procedures to ensure all work meets the required standard Required Education: High School Diploma or GED Field of Study Preferred: Industry related field experience preferred. Preferred Work Experience: 3-5 years in manufacturing operation including electrical and mechanical experience. Preferred Computer and Software Skills: Knowledge of processing methods and laboratory techniques and equipment operation. Proficiency with MS Office. Additional Requirements: Knowledge of processing methods and appropriate planning techniques. Problem solving and analytical skills. Welding and fabrication. Ability to read, analyze, and interpret technical procedures, drawings, schematics, diagrams, and instructions. Physical Requirements: This position will be in a heavy, industrial environment. Will require lifting to 60 pounds, climbing stairs and ladders while carrying tools, bending, pulling, overhead work, respirator use, hearing protection use and mechanical and electrical work. Job Type: Full-time Salary: $22.00 - $34.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Retirement plan, • 12 hour shift, • Day shift, • Evening shift, • Monday to Friday, • Maintenance: 3 years (Required)

Job DescriptionAt Big O Tires, we strive to be the preferred tire and auto service retailer in every community while making Big O Tires a great place to work. We offer affordable benefits, profit sharing bonuses, paid time off, a family oriented work environment, and all you need to be successful. Join our team today! POSITION SUMMARY As an Automotive Tire & Lube Technician for Big O Tires, you will be responsible for servicing and performing maintenance of tires and wheels in an accurate and timely manner. You are honest, have a solid work ethic and high motivation. ESSENTIAL DUTIES AND RESPONSIBILITIES • Mounting and dismounting automotive tires, • Installing new wheels, • Attaching and re-balancing wheels, • Repairing, rotating, and inflating tires, • Performing oil changes or any type of flushes and maintenance, • Calibrating TPMS, • Inventory stocking, • Participating in training & follows safety procedures, • Testing and installing batteries, • Test-driving vehicles after maintenanceQUALIFICATIONS, • Must have a valid current driver's license, • Must be at least 18+ years old, • Availability to work holidays, weekends, and after regular business hours as needed, • Reliable transportation to work, • Ability to learn new concepts and use technical materials, • Capability to safely operate automatic and manual transmission vehicles, • Willingness to work with hazardous materials and in outdoor weather conditions, • Complies with Personal Protection Equipment (PPE) regulations, • Ability to remain in a stationary position (standing and/or driving) for up to nine hours per shift, • Ability to move and lift up to 75 pounds

Job DescriptionSalary: $18-$21 Residential Niche has partnered with ADDA to recruit for a Maintenance Technician located in Pueblo, CO About The Company: Residential Niche Our Purpose at Residential Niche is simple yet powerful: Enriching the Lives of Our People & Communities. We believe in creating more than just properties; we strive to establish and curate exceptional multifamily residential and commercial spaces that truly enhance the lives of our residents and the communities we serve. What sets RN apart is our genuine dedication to creating welcoming environments. We understand the importance of fostering a sense of belonging and ensuring that everyone who interacts with our properties feels valued and at home. We take pride in our ability to create spaces that go beyond mere structures, cultivating vibrant communities where individuals can thrive. By joining RN, you'll become part of a team that values collaboration, innovation, and personal growth. We offer opportunities for long-term growth and stability, providing a supportive environment where your skills and talents can flourish. Whether you're an experienced professional or just starting your career, RN is the place where you can make a real impact and be part of something truly special. Responsibilities: • Perform maintenance and repair tasks on various equipment and systems, including HVAC, electrical, and plumbing, • Troubleshoot and diagnose issues to determine the best course of action for repairs, • Conduct routine inspections to identify potential problems and ensure equipment is functioning optimally. This includes preventative maintenance such as: changing air filters / batteries in smoke detectors / change light bulbs, etc., • Respond promptly to maintenance requests(On-Call)and prioritize tasks based on urgency, including occasional after-hours emergencies which can occur outside of business hours, • Snow removal as needed, • Collaborate with team members and communicate effectively to ensure smooth workflow and timely completion of projects, • Take pride in your work and demonstrate a strong problem-solving mindset, • Adhere to safety protocols and maintain a clean and organized work environment, • Any and all other maintenance tasks as assigned Requirements: • 1+ years of previous experience as a Maintenance Technician, • Strong decision-making skills and a positive approach to problem-solving, • Excellent communication skills and the ability to work well within a team, • Self-motivated and able to work with minimal supervision, • Proficiency in HVAC, electrical, and plumbing systems, • Access to or ownership of basic tools required for maintenance work, • Valid and non-expired driver's license, insurance, along with reliable transportation, • Lift up to 60lbs when necessary to perform maintenance tasks Benefits: • Dental, Health, Vision Insurance as well as 401K, • Company paid AD&D, Life plan, • Company paid private plan for CO FAMLI program, • Join a dynamic team of professionals dedicated to providing high-quality maintenance services, • Work in a supportive environment that values teamwork and collaboration

Job Description Job Summary We are looking for experienced Diesel Mechanics/Technicians in Pueblo, CO Pay starting at $25 per hour with the potential to go hire. Commission also available. As a Diesel Technician, you will provide accurate, efficient service to customers by troubleshooting, diagnosing, and repairing heavy duty trucks and trailers in a professional and accommodating manner. Our Technicians ensure we are returning every traveler to the road better than they came! In this role, you can expect to: · Work in a fun, trusting environment focused on providing great service where the expectations of the customer are exceeded · Have extensive knowledge of the products we sell and the services we provide · Diagnose wear conditions and together with TSA or Manager, makes recommendations to customers · Complete repairs within their capabilities and as written · Understand Truck Service Standard Services and specialized customer programs · Follow safety guidelines and reports potentially unsafe situations caused by team members and/or customers. What we’d like to see: · A dedicated individual who works well with others and is excited to be part of our team! · Good verbal and written communication skills · Previous experience in repair or parts shop preferred · Basic computer skills · Ability to work flexible hours including nights, weekends and some holidays in interior and exterior conditions · A valid driver’s license Typical Physical Demands In this role, the team member is regularly required to talk and hear. Standing, walking, kneeling, stooping, bending over, crouching, crawling, climbing, and repetitive use of legs are done occasionally. The team member is occasionally required to lift up to 50 lbs and/or move heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. All performed with or without a reasonable accommodation. Work Environment While performing these duties of this job, the employee may be exposed to outdoor elements in all seasons. Occasionally, the employee will also be exposed to fumes and particles, moving mechanical parts and vibration. The noise level in the work environment can be loud at times. While performing these duties, the employee may be exposed to dirt, dust, grime, grease, oil, gas, high-concentrated cleaning solutions, etc. Requirements Qualifications for the Diesel Technician position: • High school diploma or equivalent; vocational training in diesel technology is preferred., • Considerable experience in diesel repair and maintenance., • Strong problem-solving and diagnostic skills., • Ability to work independently and as part of a team., • Effective communication skills., • Valid driver's license with a clean driving record., • Willingness to work flexible hours, including nights and weekends.

Job Description We are currently seeking a Lead Automotive Technician to join our high-volume, full-service automotive repair center. The ideal candidate will be able to work efficiently in a fast-paced environment, possess their own comprehensive set of tools, and take pride in delivering quality and timely work. Our technicians' weekly pay is uncapped, with top performers earning over $100K annually! We provide a clean, modern and safe workspace equipped with state-of-the-art tools, a steady flow of customers, and the chance to work alongside skilled Store Managers. We’re looking for a dedicated professional who is serious about earning competitive wages and becoming a long-term member of our dynamic team. Responsibilities: • Perform routine vehicle maintenance tasks, including oil changes, tire rotations, and brake replacements., • Complete digital inspections to provide to the customer., • Diagnose and repair mechanical and electrical issues., • 5+ years as an Automotive Technician., • Strong knowledge of vehicle diagnostic systems and methods., • Weekly Guarantee: $1,000 - $1,500 depending on qualifications, • Commission Potential - $75,000 - $110,000 or more per year, • Benefits include Health Insurance, Dental, 401k plan with company match, PTO based on tenure Job Type: Full-time Pay: $75,000.00 - $110,000.00 per year Benefits: • 401(k), • Employee discount, • Health insurance, • Professional development assistance Work Location: In person

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, & ASE certifications are preferred & rewarded Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations 55myEINRip

Job DescriptionJoin Our Team of HVAC Service, and Sales Pros Today! Do you value professionalism and punctuality? Do you want to work with the best pros in the HVAC industry? If you are an individual who values a rewarding career and providing amazing customer experiences, you may be a match for our team. Opportunities for professional technicians and customer service professionals are now available across the country. JOB SUMMARY This position performs service, repair, and maintenance on HVAC systems in a residential and light commercial setting. JOB DUTIES • Services, maintains, repairs and sales on residential and light commercial HVAC systems, • Determines general condition of HVAC systems, and can troubleshoot HVAC malfunctions and determine extent of necessary repairs, • Always maintains a neat work area and inspects that area for cleanliness after completion of each job, • Conveys a safety-conscious attitude, both on the job and while driving, • Wears floor savers while in the clients home, • Maintains company vehicle, ensuring that it is always clean on both the inside and the outsideMINIMUM REQUIREMENTS, • High school diploma or equivalent, • Must have prior, successful experience as a Technician in the HVAC industry, • NATE certification preferred, • Must display strong communication skills and technical competence, • Ability to pass a thorough background check and drug screen, • Clean driving record

Job DescriptionSalary: $15-$16 Residential Niche has partnered with ADDA to recruit for a Maintenance Technician located in Pueblo, CO Position Summary The Housekeeper is responsible for maintaining the cleanliness and appearance of the apartment community, including common areas, management offices, amenities, and vacant units. This position plays a critical role in ensuring a safe, sanitary, and welcoming environment for residents, guests, and staff. Essential Duties and Responsibilities • Clean and sanitize common areas, including hallways, lobbies, restrooms, laundry rooms, fitness centers, and community spaces., • Prepare vacant apartment units for new residents by thoroughly cleaning kitchens, bathrooms, flooring, appliances, and fixtures., • Perform routine cleaning duties such as dusting, vacuuming, sweeping, mopping, polishing, and trash removal., • Restock restroom and supply areas as needed., • Maintain cleaning equipment and report repair or replacement needs to management., • Identify and promptly report safety concerns, maintenance issues, and property damage., • Ensure compliance with company policies, procedures, and safety standards., • Assist with special projects and seasonal cleaning as assigned. Qualifications • High school diploma or equivalent preferred., • Prior housekeeping, janitorial, or custodial experience preferred, particularly in residential or commercial settings., • Ability to work independently and follow instructions with minimal supervision., • Strong attention to detail and commitment to quality standards., • Physical ability to perform cleaning duties, bending, standing, and climbing stairs., • Reliable, punctual, and professional demeanor. Work Environment • Work performed in both indoor and outdoor settings within an apartment community., • Regular exposure to cleaning chemicals and equipment. Equal Employment Opportunity Statement Residential Niche is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic in accordance with applicable laws.

Job Description Requirements • RVIA certification is recommended but not required, • A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs, • Plumbing-Carpentry-HVAC-Electrical-Mechanical-RV Service, • A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs, • Certification from college or technical school in trade field (HVAC, Electrical, Plumbing, Maintenance, etc.) is certainly helpful but, we also consider applicable work experience, • Valid driver's license Responsibilities • Provide and document complete diagnostic tests and repair or replacement services to customers, • Perform electrical, plumbing, carpentry, and appliance maintenance, • Track all parts and materials used in repairs or replacements, • Keep supervisor appraised of work progress, • Ensure that the final work product meets quality standards and is inspected by the supervisor or designee, • Prolonged periods of standing, stooping, crawling, and bending, • Exposure to heights and hazards related to working with electrical and welding equipment, • Environmental conditions include heat, cold, humidity, noise, dust, and wetness, • May lift up to 25 lbs and/or move up to 50 lbs, • Make 100 % productivity the goal and keep as close to that as possible, • Use factory specifications as the standard in all repair, service, and customization work, • Provide excellent customer service for all external and internal customers, specifically offering dependable vehicle service, • Receive service assignments from the service writer or service manager, • Have the repair work finished within the allotted time. Set goals, develop skills, and constantly increase efficiency skill level, • Submit your requested parts as soon as it is determined what is required for a particular job, • Keep the service writer or service manager informed of any additional work that may be required or of any delays to the estimated completion time as you make those determinations so the customer can receive up-to-date information, • Aid service writer as needed to write work orders, conduct test rides, interact with the customer, or in any other way you are able to guarantee customer satisfaction, • Maintain a clean, efficient work area and assist in keeping the shop neat and organized, • Make sure the proper paperwork is completed and filed after every job completion, • Keep your technical qualifications current by finishing any required training programs, • Take care that the vehicle is cleaner when the job is completed than when the customer dropped it off Salary is based on a structure that takes into account an individual’s experience. Company DescriptionWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local lawsWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws

Since the beginning, our undeniable passion has driven our organic growth from a small property management firm to one of the most trusted allies in real estate. Asset Living is a member of The Institute of Real Estate Management (IREM) and is recognized as an Accredited Management Organization (AMO

Since the beginning, our undeniable passion has driven our organic growth from a small property management firm to one of the most trusted allies in real estate. Asset Living is a member of The Institute of Real Estate Management (IREM) and is recognized as an Accredited Management Organization (AMO

Essential Duties & Responsibilities * Community Maintenance * Regular/daily onsite attendance is required * Respond to resident/management requests and work orders for community common areas, buildings, and units in a timely manner * Ensure all repairs and replacements necessary for community commo

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact The Advanced Solar Field Service Technician (Operations and Maintenance) in the PEARCE Renewables Solar Operations and Maintenance Division performs tasks involving physical labor at solar energy sites near Pueblo, Colorado. The Solar Field Service Technician is responsible for the operation and maintenance (O&M) of solar power plants in accordance with established preventative and corrective maintenance standards while always maintaining safety and professionalism. These are local sites-candidates should reside within 50 miles of the Pueblo, Colorado areas. Core Responsibilities • Conduct preventative and corrective maintenance of Solar Utility and Sub-Station equipment., • Responsible for documentation including, but not limited to, work orders, time logs, inventory control, and emergency information schedules., • Provide a working knowledge of troubleshooting electrical components with help and use of digital multi-meters, meggers, amp clamps, and similar equipment., • Testing/troubleshooting installed solar equipment and ensuring proper working order., • Must have a strong safety background with experience in Lock Out Tag Out (LOTO) and Job Hazard Analysis (JHA)., • Able work in a solo as well as a group environment. Core Experience • 2+ years' experience in Commercial/Industrial operations and maintenance (O&M) on solar power plants is preferred., • Preventative Maintenance experience on Solar Utility equipment is preferred., • Candidates should possess strong mechanical and electrical experience with troubleshooting and installation skills., • Specific solar experience with Inverters, Tracker Systems, or Sub-Stations Equipment (TMEIC/SMA/Sungrow/Nextracker/ATI, etc.) is preferred., • Takes initiative to escalate issues at site., • Ability to train, mentor, and develop laborers into Apprentices. At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Must live within approximately 50 miles of the Pueblo, Colorado areas., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Employment may require working on weekends and holidays, including an "on call" service availability via telephone/text message. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$42 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Nearest Major Market: Pueblo Nearest Secondary Market: Colorado Springs Job Segment: Auto Technician, Facilities, Technician, HVAC, Automotive, Operations, Technology. Maintenance Technicians play a crucial role in our operations by ensuring a safe, clean, and well-maintained environment. Use of var

Aerotek - JobID: JP-005602421 [Maintenance Technician] As a Carpenter at Aerotek, you'll: Follow blueprints when installing structures and fixtures, such as windows and molding; Perform measuring, cutting, or shaping wood and plastic; Build cabinets and vanities.

Date Posted: 2025-09-22 Country: United States of America Location: HCO02: Wheels & Brakes (Carbon)-Puebl 50 William White Blvd, Pueblo, CO, 81001 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here. Security Clearance: None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. We are seeking a skilled Instrumentation Technician to support calibration, maintenance, and troubleshooting of factory instrumentation and control systems. This role involves working with analog and digital communication systems, ensuring accurate calibrations, performing preventative maintenance, and supporting equipment commissioning. The ideal candidate will have hands-on experience with various test equipment, strong troubleshooting skills, and a commitment to safety and reliability in a fast-paced manufacturing environment. What You Will Do \n • Calibration of critical and non-critical instrument transmitters across the factory using multifunction calibrators and the DCS (distributed control system). This includes documentation and record keeping of calibrations in AMS (Asset Management System). This also requires planning of calibration due date's to not impact customers.\n, • Troubleshooting and replacement/repair of malfunctioned instruments including control system hardware. Technician will use a variety of test equipment to troubleshoot including field communicators, AMS (Asset Management System), digital volt meters, amp meters, advanced multifunction calibrators, and oscilloscopes as needed. Responsibilities include primarily working with 4-20mA analog current loops and 24VDC/120VAC discrete control voltage along with HART, Modbus, and Fieldbus communication protocol systems. The use of control loop drawings and P&ID's is required for troubleshooting instrument issues.\n, • Perform PM's (preventative maintenance) and work order completion for SAP scheduled events.\n, • Specifying/solicit quotes from vendors and ordering of new/replacement instrumentation equipment.\n, • Support of new instrumentation commissioning and startup. \n, • Support senior technicians with equipment troubleshooting as needed. \n, • Work safely and be able to troubleshoot analog signal loops and 24VDC/120VAC discrete control loops.\n, • Ability to troubleshoot Digital Communication Systems. (HART, MODBUS and FIELDBUS)\n, • Ability to calibrate pressure, temperature and flow transmitters using multifunction calibrators. (e.g. Beamex MC6)\n\n Qualifications You Must Have: \n • Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 4 years of relevant experience\n, • ISA CCST Level One certification (or equivalent) or applicable associates degree (Electrical Technology, Instrumentation and Controls, Electronics Technology, Mechatronics Technology or similar program).\n\n Qualifications We Prefer: \n • Electrical safety training to include ARC Flash and Lock Out/Tag Out.\n, • Familiarity with field communicators, digital volt meters, amp meters and oscilloscopes.\n, • Basic familiarity with pyrometer theory.\n, • Basic familiarity with Gas Chromatographs.\n, • Basic ability to read and understand electrical one lines, P&ID's and loop diagrams.\n, • Ability to order replacement in kind equipment to maintain spares inventory.\n, • Able to use Vendor manuals to install, troubleshoot, repair or calibrate equipment with minimal assistance.\n, • Ability to perform Loop Checks to the DCS Graphics (Delta-V) and troubleshoot issues to fix the loop.\n, • Perform troubleshooting/repair of Digital Valve Controllers.\n, • Perform valve hardware replacement and bench set control valves.\n, • Generate and manage minor projects (<100k)\n, • Ability to work with minimal supervision.\n\n What We Offer Benefits Some of our competitive benefits package includes: \n • Medical, dental, and vision insurance \n, • Three weeks of vacation for newly hired employees \n, • Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option \n, • Tuition reimbursement program \n, • Student Loan Repayment Program \n, • Life insurance and disability coverage \n, • Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection \n, • Birth, adoption, parental leave benefits \n, • Ovia Health, fertility, and family planning \n, • Adoption Assistance \n, • Autism Benefit \n, • Employee Assistance Plan, including up to 10 free counseling sessions \n, • Healthy You Incentives, wellness rewards program \n, • Doctor on Demand, virtual doctor visits \n, • Bright Horizons, child and elder care services\n, • Teladoc Medical Experts, second opinion program \n, • And more! \n\n Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! Role Type Definitions: *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. The salary range for this role is 40,000 USD - 82,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Are you searching for an exciting career opportunity within a dynamic team? Look no further! Walmart is expanding its workforce across local retail stores and is actively recruiting Developmental Technicians specializing in Refrigeration and HVAC Maintenance. If you have experience in this field, we

Built on a foundation of trust, we deliver a range of engineering, construction, and maintenance services that power, connect, and enhance society.

Essential Duties & Responsibilities * Community Maintenance * Regular/daily onsite attendance is required * Respond to resident/management requests and work orders for community common areas, buildings, and units in a timely manner * Ensure all repairs and replacements necessary for community commo

Ability to read and interpret documents such as safety regulations, operation and maintenance instructions, and. Perform skilled work in maintenance, repair and construction of lighting and power as part of the electrical jobs.

The Maintenance Technician is responsible for assisting in carrying out the maintenance processes of the property, including corrective, preventative, routine, emergency, and cosmetic maintenance. The Maintenance Technician is also responsible for the make-ready process in a manner consistent with t

Work tasks include inspecting testing, troubleshooting, repairing, overhauling, modifying, and performing general maintenance of complex alternating/direct current (AC/DC) electrical and electronic equipment such as motors, transformers, generators, switches, sensors, control panels, variable freque

Duties also include operating vehicles and equipment in either a specific or a variety of maintenance, construction and/or utility tasks. Assisting with Pueblo RecycleWorks site operations which includes yard clean-up, equipment maintenance, and assisting vendors.

Residential Service and Install Technician.

The client's customers are as diverse as their products, ra Field Service Technician, Service Technician, Field Service, Field Technician, Service Tech, Technician, Retail, Staffing.