Trabajos maintenance technician en Baton Rouge, LouisianaCrear alertas

Provide appropriate, efficient and timely pre-hospital basic life support care and transportation of the sick and injured in accordance with local, state, national and Acadian Ambulance standards of practice. DUTIES AND RESPONSIBILITIES: This job description is not intended, nor should it be construed, to be an all-inclusive list of responsibilities, duties, skills or working conditions associated with the job. It is intended to be a general description of the essential duties and requirements common to positions of this type and may be subject to change. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Conducts a careful examination of the patient for signs and symptoms of illness/injury and assists other medical personnel as necessary., • Administers prompt and efficient basic life support care within the limits of licensure or certification and in accordance with approved protocols prior to and during transport., • Provides careful handling of the patient to and from the ambulance., • Provides safe and efficient transport of the patient in the ambulance to the medical facility., • Provides a safe and efficient transfer of patient and patient care information to the receiving personnel at the destination., • Documents all aspects of patient condition and treatment on EMS run reports. Obtains and records non-medical patient information as required. Completes other patient documentation and forms as required, • Conducts regular unit inventory and equipment testing to ensure all equipment for which the EMT Basic is responsible is present, clean and in proper working order., • Upon completion of transport, responsible for all assigned duties which will place the ambulance and equipment back in service., • Responsible for full knowledge of the ambulance's basic life support equipment and its proper use at all times., • Documents and reports all needed repairs to the proper maintenance departments (electronic or mechanical) as well as to supervisors and other ambulance personnel as required., • In the absence of other qualified personnel, responsible for the use of basic extrication tools and procedures to gain access to the patient if necessary., • In the absence of other qualified personnel, responsible for controlling the patient's surroundings in such a way as to minimize further danger and control the actions of bystanders., • In both the emergency and non-emergency setting, operates I drives the ambulance in a safe and efficient manner, following company driving guidelines, so the safety or condition of the occupants are not compromised., • Follows all FCC regulations when communicating via electronic communications equipment., • Attends all mandatory meetings as scheduled., • Completes assigned station and station grounds duties., • Orders supplies and equipment from Central Supply to replenish station and ambulance inventories as needed., • Completes assigned ambulance duties (i.e., washing, waxing, interior and exterior cleaning, etc.) as required., • Completes all required company reports and logs and when necessary provides other ambulance and supervisory personnel with the information., • If an approved preceptor, responsible for precepting new employees as directed., • If an approved preceptor, responsible for precepting EMT-Basic students as directed, • Must meet and fulfill the qualifications, requirements, functions and responsibilities of the Emergency Medical Technician -Basic job descriptions., • Performs other duties as assigned. QUALIFICATIONS: • High School Diploma or GED., • National and/or State certification as an Emergency Medical Technician-Basic determined by appropriate state requirements., • Current CPR certification as established by the American Heart Association., • Current and valid state-issued driver's license determined by appropriate state requirements (equivalent of a Louisiana Class "D" driver's license)., • Must be able to read, write and communicate professionally and effectively with employees and managers. Must possess the ability to write simple correspondence or reports. Must possess the ability to effectively present information in one-on-one and small group situations to other employees and/or managers., • Must be knowledgeable of company protocols, operational procedures and safety policies., • Must be able to drive large vehicles in normal and adverse conditions. INTERPERSONAL REQUIREMENTS: • Maintain social, ethical and organizational norms., • Maintain good personal motivation; develop a sense of ownership of job tasks and results., • Must have a sense of urgency for all work performed., • Ability to work under the pressure of meeting strict deadlines., • Excellent interpersonal and communication skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Electrical & Instrumentation Tech Full-time, Permanent One-site Location: Gloster, MS As an electrical and instrumentation technician, you will be responsible for maintaining the electrical and instrumentation equipment at the production facility. The individual will be responsible for performing routine maintenance of the facility’s electrical equipment. Why join Drax? At Drax, we’re not just generating power; we’re transforming it. We’re a diverse and committed team, working together to create a brighter, more sustainable future. When you join us, you’ll find: • A Clear Purpose: Be part of a company at the forefront of sustainable energy, making a real difference for the planet and our communities., • Growth Opportunities: We believe in developing our people., • Comprehensive Benefits: From day one, you’ll receive competitive wages, comprehensive health and dental benefits, and an RRSP matching plan to support your financial goals. You’ll also participate in a company bonus plan that rewards overall Drax performance and safety., • A Supportive Team: Work in an environment where continuous learning is encouraged, and your contributions are valued. We’re a ‘can-do’ kind of place, empowering you to make informed decisions and do the right thing. Your Day-to-Day as a Electrical & Instrumentation Technician: • Inspects, tests, adjusts, calibrates, and repairs electric, electronic, mechanical, and pneumatic instruments and systems used to indicate, and record, • Inspects meters, indicators, and gauges to detect abnormal fluctuations, • Maintains a functional knowledge of the operations software and hardware, • Make preventative maintenance inspections of all control instrumentation, • Troubleshoots electrical, hydraulic, pneumatic, and mechanical failures and the aptitude to correct those failures, • Complete work order cycles, performs work, confirm time, and enter equipment history, • Diagnoses existing or potential trouble with plant electrical equipment, • Cleans, lubricates, calibrates, and adjusts as conditions indicate, • Lays out, installs, and places electrical equipment into service, • Performs housekeeping duties as requested, is responsible for keeping designated area clean and clear of safety hazards, • Multi-craft skill set is a plus; ability to perform additional maintenance tasks as assigned What you’ll bring: To excel in this vital role, you’ll need: • High school diploma or equivalent required, • Technical degree preferred, • 5+ years industrial maintenance experience, • Ability to adapt to working within a team or lone working environment, with minimal supervision, • Maintain and adjust equipment to maximize production and minimize downtime, • Experience with Computerized Maintenance Management Systems (CMMS); Must have experience with Programmable Logic Controllers, Servo and Frequency Drives, • Must have a professional attitude and work well with others, • Promote a safe working environment and follow all workplace and job safety procedures, • Perform/coordinate good housekeeping in the facility, • Must be willing to work shift which includes weekends, nights, and holidays How we act at Drax: Our culture is built on a few core beliefs that guide everything we do: • We care about what matters: We support each other to achieve important goals., • We’re a can-do kind of place: We’re empowered to make informed decisions and do what’s right., • We see things differently: We share insights, search for new ideas, and innovate., • We listen carefully: We ensure everyone feels heard and valued., • We do what we say we’ll do: We are proactive, committed, and reliable. Ready to make a difference? Apply today to help Drax discover the talented individuals we need to drive this change. A career at Drax is more than just a job—it’s a chance to make a difference. Curious to learn more about us? We recommend you connect with us on LinkedIn for more insights. The Drax Talent Acquisition team will never use third-party apps to make job offers. The recruitment process with Drax will always include at least one face-to-face interview, either in person or via an online video call, as well as several phone conversations. Drax will never ask you to download apps to enter timesheet details or ask you to purchase your own IT equipment. If you have any concerns please contact us at careers@drax.com

The primary role of the Maintenance Technician is to assist with the maintenance program for the community and preserve the value of the asset.The Maintenance Technician assists in maintaining the community's interior and exterior physical condition and is a customer service driven team player.Repor

Job Description Job Title: CMT Technician / Inspector Job Description This junior-level CMT Technician / Inspector role offers an opportunity to learn the fundamentals of construction materials testing and inspection in the Baton Rouge area. You will support experienced technicians and engineers in the field and office, gaining hands-on experience with pile monitoring, vibration monitoring, soil classification, and material sampling while contributing to high-quality construction projects. Responsibilities • Assist in monitoring piles during construction activities and accurately record pile data., • Support vibration monitoring efforts around construction sites and document readings and observations., • Help classify soils in the field and in the office under the guidance of technicians and engineers., • Collect concrete, soil, and other construction materials for testing according to established procedures., • Follow technicians and engineers in the field to observe and learn company practices and CMT industry standards., • Perform basic documentation and recordkeeping to support the inspection and testing process., • Apply concrete inspection and monitoring techniques as directed, including tasks related to ACI standards under supervision., • Use appropriate personal protective equipment (PPE), including hard hat, safety glasses, steel-toe boots, and long pants, at all required times., • Contribute to a team-oriented environment by assisting with tasks as needed and avoiding a "not my job" mindset., • Operate a personal vehicle to travel to job sites when needed, maintaining a clean driving record if driving duties are assigned. Essential Skills • At least 6 months of construction experience in a related field., • Strong dependability, including punctuality and consistent follow-through on assigned tasks., • Positive attitude and willingness to learn from experienced technicians and engineers., • Ability to follow instructions and established procedures for monitoring, inspection, and documentation., • Basic understanding of construction environments and field work., • Clean driving record (DMV) suitable for operating a vehicle for work-related travel, if required. Additional Skills & Qualifications • Familiarity with concrete work, inspection, or monitoring is beneficial., • Exposure to documentation processes related to construction or inspection work is a plus., • Any experience or coursework related to ACI (American Concrete Institute) practices is advantageous., • Ownership or access to a reliable truck for traveling to job sites is a plus., • Interest in developing a career in construction materials testing (CMT) and inspection., • Ability to work effectively in both field and office environments. Why Work Here? You will join a small, close-knit team where collaboration and mutual support are central to daily work. The organization emphasizes a team-first mindset and values people who are willing to help wherever needed rather than focusing narrowly on job titles. The mix of field and office work provides variety in your day and a chance to build a broad skill set in construction materials testing. As a junior-level hire, you will receive guidance from experienced technicians and engineers, giving you a strong foundation for long-term growth in the industry. Job Type & Location This is a Contract to Hire position based out of Baton Rouge, LA. Pay and Benefits The pay range for this position is $17.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Baton Rouge,LA. Application Deadline This position is anticipated to close on Jun 19, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description General Service and Quality Control Technician About us L&S Automotive is a family owned small business in Baton Rouge, LA. Our goal is to provide the best Automotive Repair experience in Baton Rouge. Benefits Health, vision, dental, and hearing insurance, 401K with match, paid time off, NO WEEKENDS! Duties • Assist with repair and maintenance tasks, • Perform inspections and check vehicle issues, • Perform maintenance and basic repairs, • Use hand tools and equipment to complete repair tasks, • Follow schematics and technical manuals for accurate repairs, • Assist with equipment repair and maintenance as needed, • Provide support to the team as required Requirements • Proficiency in using hand tools for repair tasks, • Ability to read and interpret schematics and technical manuals, • Knowledge of repair and maintenance procedures, • Experience is a plus Pay depends on experience. This is meant to be an entry level position with opportunity to grow within the company. #hc214151

Job Title: Advanced Electronics / Computer Field (ET/FC) Category / Component: Enlisted • Active Overview The Advanced Electronics and Computer Field trains Sailors to maintain, operate, and repair some of the Navy's most sophisticated electronics and computing systems, including radar, communications, navigation, local area networks, weapons fire control, and Aegis combat systems. ETs and FCs form the backbone of a ship's Combat Systems department aboard carriers, cruisers, destroyers, and other surface combatants, as well as at repair and technical activities ashore. Key Responsibilities Serve as an Electronics Technician (ET) or Fire Controlman (FC) after training, based on performance and Navy needs; as an ET, maintain and repair radar, communication, and navigation equipment including transmitters, receivers, displays, and shipboard communications suites such as SATCOM and HF; as an FC, operate, maintain, and repair fire control radars, computers, large screen displays, local area networks, weapon control consoles, and automatic gun systems; troubleshoot complex electronic and electro mechanical faults using technical documentation, test equipment, and established procedures; maintain configuration control, documentation, and logs that support inspections, certifications, and combat system readiness. What to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Work Environment Assignments aboard surface combatants such as aircraft carriers, Aegis cruisers and destroyers, and amphibious ships, as well as at shore based repair and technical facilities; daily work in combat systems spaces, radar rooms, communications centers, electronics shops, and shipboard network spaces; a mix of lab style environments and shipboard spaces with noise, ladders, confined areas, and occasional exposure to heat or weather when working on topside equipment. Pathways, Training & Advancement Recruit Training followed by Apprentice Technical Training at Great Lakes, Illinois, covering basic electronics, circuitry, safety, digital theory, microcomputers, fiber optics, test equipment, and troubleshooting; strand training in either the Fire Controlman or Electronics Technician track, with FCs focusing on radar, ballistics, and fire control basics, and ETs focusing on communications suites and radar systems; follow on A School and platform or system specific C Schools, often with college credit recommended by the American Council on Education; accelerated advancement to E4 upon completion of initial school training and all advancement requirements, with continued promotion based on performance, time in rate, and professional development. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Normal hearing and color perception to work safely with electronic displays and color coded wiring and schematics; strong arithmetic and computing aptitude, with the ability to learn digital theory and complex technical systems; physical strength and manual dexterity to handle equipment, tools, ladders, and shipboard environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Description Loader/Unloader Service We are specifically looking for coverage in the Zachary/Port Allen area, but may possibly need to cover the greater Baton Rouge area as well. The Loader Unloader Service person is responsible for performing a variety of tasks to meet customer needs and prepare returned equipment for the next customer. They serve the customer in person, provide helpful demonstration and information about the item the customer rents, and safely load and unload for the customer. When an item comes back from a rental, the service technician takes the steps to completely prepare it for the next renter with basic maintenance and small repairs as needed. The position requires constant interaction with the public and co-workers. Heavy lifting, a significant amount of walking, bending, pushing, and transporting objects of various weights and dimensions is required. Work is in general warehouse conditions normally not heated or air conditioned as well as outside with varying weather conditions. Chemicals, including gasoline, diesel fuel, propane, and cleaning solvents are commonly encountered in this position. Essential Duties and Responsibilities: • Greet customers who enter the yard promptly and address their needs., • In person demonstration of equipment with customer, each & every time an item is rented., • Safe loading and unloading of equipment. Secure loaded equipment per company procedure., • Checking equipment for damage upon return. Communicate any damage to the supervisor., • Confirm all items/included accessories are returned. Report missing items to the supervisor., • Prepare returned items for the next renter per our Service Guidelines., • Maintain a clean, organized work area., • Maintain a professional appearance and follow uniform policy., • Attend instructional meetings as required., • Practice personal safety and report any other safety concerns to supervisor., • Adhere to all company policies, procedures, rules, and regulations in written or verbal form., • Assist other personnel as needed. Requirements: • Customer service skills., • Basic mechanical knowledge., • Positive, willing attitude., • Must be able to understand and complete instruction., • High school diploma or GED is preferred but not required., • Must be able to pass a company drug screen., • Valid driver’s license. You can also apply in person 11189 Airline Highway Baton Rouge LA 70816 Company DescriptionAAA Rent-All is an equipment rental company that has proudly served Baton Rouge and the surrounding area since 1958. We rent construction equipment and more to a wide variety of customers. We value employees who take pride in what they do, are accountable, smart workers who put the team first- and most importantly, they strive to create a 5 star experience for our customers.AAA Rent-All is an equipment rental company that has proudly served Baton Rouge and the surrounding area since 1958. We rent construction equipment and more to a wide variety of customers. We value employees who take pride in what they do, are accountable, smart workers who put the team first- and most importantly, they strive to create a 5 star experience for our customers.

Chrysler Certified Technician Mark Dodge in Lake Charles, LA is looking for Chrysler Certified Technicians to join their industry leading Service Team! Enjoy excellent pay and performance incentives at a dealership where your skills will be recognized and rewarded! Job Responsibilities Perform work outlined on maintenance and repair orders to ensure customer satisfaction Diagnose the cause of any malfunction and repair in a timely manner Provide labor and time estimates for additional automotive repairs Able to explain mechanical problems and needed repairs to Service Advisors and vehicle owners in a non-technical manner Continuously learn new technical information and techniques in formal training sessions in order to stay in line with rapidly changing technology Job Requirements Chrysler certification required Ability to diagnose and repair engine, transmission, electrical, steering, suspension, brakes, and AC systems Hold a valid driver’s license Dealership Commitment: Competitive wages Training Health, Dental, Vision, Life, Short and Long Term Disability Insurance 401k with company match (at qualifying dealerships) Professional working environment Find out all this Dealership can offer you! Apply today!

Location: 6890 Pecue Lane, Baton Rouge, LA 70817 What’s the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you’ll do exactly that. Here, you’ll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you’re looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You’ll get to work on lots of different types of equipment—not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we’ll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You’ll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. This position will work 2nd shift.; 1:30pm-10pm and every other Saturday 7am-3:30pm. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske’s technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd ($2.00), 3rd ($3.00) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred) • Valid driver’s license • The ability to solve problems and comfort using tools • Excellent customer service skills and communication skills • The ability to work well as part of a team and outside • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 6890 Pecue Lane Primary Location: US-LA-Baton Rouge Employer: Penske Truck Leasing Co., L.P. Req ID: 2605380 Requirements

Job Description Porsche Technician – Harris Porsche (Baton Rouge Area) Join a team built on precision, performance, and innovation. At Harris Porsche, we’re looking for an experienced and motivated Porsche Technician to join our high-performing service team. If you take pride in craftsmanship and want to work on some of the most advanced vehicles in the world, this is your opportunity. What You’ll Do • Perform diagnostics, maintenance, and repairs on Porsche vehicles, • Utilize advanced diagnostic tools and factory procedures, • Leverage new AI-driven diagnostic software to reduce diagnostic time and improve accuracy, • Complete multi-point inspections with accuracy and efficiency, • Collaborate with service advisors and foreman to deliver top-tier client experience, • Maintain Porsche standards for quality and safety What We’re Looking For • REQUIRED: Prior experience as an automotive technician, • European or luxury brand experience strongly preferred, • Porsche certification (preferred but not required—we can help you get there), • Strong diagnostic and electrical troubleshooting skills, • High attention to detail and pride in your work, • Team-oriented mindset with a strong work ethic, • Must be over 21 years of age to apply What We Offer • Competitive pay (flat rate + performance incentives), • Paid training & Porsche certification opportunities, • State-of-the-art facility and equipment, • Cutting-edge technology, including AI-assisted diagnostics, • Supportive leadership and strong shop culture, • Health benefits, PTO, and career growth opportunities Why Harris Porsche? We’re not just a dealership—we’re a performance-driven team that values quality work, integrity, and long-term relationships with both clients and employees. You’ll work alongside passionate professionals who care about doing things the right way. Apply Today If you’re ready to take your career to the next level with Porsche, we’d love to hear from you. Harris Porsche – Baton Rouge, LA Company DescriptionWhat We Offer: • Competitive Compensation, • 401K With Company Match, • Vision / Dental / Health Insurance, • Bonus Incentives, • Paid Training, • Great CultureWhat We Offer:\r\n• Competitive Compensation\r\n• 401K With Company Match\r\n• Vision / Dental / Health Insurance\r\n• Bonus Incentives\r\n• Paid Training\r\n• Great Culture

Job DescriptionCompany Description Express Oil Change & Tire Engineers is the pre-eminent automotive maintenance provider in the nation with over 350 locations across 21 states, leading our industry through excellence, innovation, and growth. Don’t let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services. Job Description The Automotive Technician, reporting to the Store and Service Managers, is responsible for performing basic and advanced car maintenance and repair tasks, inspecting vehicles for potential problems, and troubleshooting issues to ensure vehicle is performing appropriately and the customer is taken care of. Primary Responsibilities include (but are not limited to): • Application of in-depth automotive repair knowledge, • Providing service of the highest quality to our customers, • Performs skilled mechanical work while analyzing and diagnosing problems, • Inspect, replace and/or repair defective parts while performing preventative maintenance on automobiles, • Continuously learn new technical information and techniques to stay abreast with rapidly changing automotive technology, • Demonstrate behaviors consistent with the company’s vision, mission, and core values in all interaction with customers, co-workers, managers, and suppliers, • Adhere to all company policies, procedures, and safety standards, • Maintain a safe, clean, and organized work areaQualifications We are looking for: • A minimum of 2 years’ automotive service, automotive mechanic, and/or engine diagnostic experience in a professional capacity, • ASE Certification preferred, but not required, • Must have Technician Tools, • Valid driver’s license, • Ability to operate and drive vehicles, • Ability to pass a pre-employment drug test and background screen, • Effective communication and interpersonal skills, • Top-notch customer service skills with a desire to build long term trust and relationships with our customers, • Willingness to work Saturdays Additional Information All your information will be kept confidential according to EEO guidelines. Physical Requirements: • Prolonged periods of standing, stooping, and bending, • At time, exerting 50 - 100 lbs of force occasionally and/or 10 - 25 lbs of force frequently and/or greater than 10 lbs of force constantly to move objects, • Requires working at a production rate pace entailing the constant pushing and/or pulling of materials By completing this application, you are agreeing that you are able to meet the physical requirements listed for this role.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc238937

Job Description Quick Lube Technician (Entry Level) – Automotive Why wait to make a career out of doing what you love? Some of our best master technicians started as quick lube techs. So if working on cars gets your gears moving, contact us today. As a quick lube tech, you’ll start by being responsible for inspecting and lubricating vehicles quickly and thoroughly. And with a little hard work and dedication, who knows where you’ll be able to go? At our dealership, the door is always open. And so are your options. Job Responsibilities • Perform multipoint inspections, • Communicate additional service/repair needs to service advisors, • Service universal joints, grease fittings, and steering knuckles using hand- or compressed-air powered grease guns, • Inspect fluid levels in steering gears, power steering reservoirs, transmissions, differentials, rear axle housings and shackles, • Check tire pressure, • Lubricate moving parts with specified lubricants, • Drain oil from crankcase and refill with required amount of oil, • Add water to radiator and battery, • Replace oil and air filters, • Inspect all vehicles for additional repairs, • Adhere to all company policies, procedures, safety standards and codes of conduct, • Follow dealership safety procedures to avoid exposure to fumes, dirt and harsh chemicals Compensation Compensation is based on experience and commensurate with Fortune 500 companies. Qualifications • Must meet dealership’s requirements for employment, • Ability to read/comprehend written instructions and information, • Familiarity with all aspects of automotive repair/maintenance, • Must have a valid driver license and be able to operate manual transmissions, • Prior experience as a technician’s helper or apprentice preferred, • Effective communication and interpersonal skills Physical Requirements/Working Conditions • Occasional exposure to inclement weather, • Ability to operate an automobile, • Prolonged periods of standing, stooping and bending, • Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than 10 pounds of force constantly to move objects, • Requires a significant amount of walking and/or standing. May also require working in the seated position for long periods while operating controls with arms and legs. This position may also require working at a production pace while pushing and/or pulling materials from place to place. Benefits Offered • Medical, • Dental, • Vision, • 401(k), • Basic Life Insurance, • Accident & Critical Illness Insurance, • Paid Training, • Short Term Disability, • Employee Discount Program About Us Family Car Group is a reputable, well-established, family-owned, and operated auto dealership group with a strong presence in our community. Our dealerships are dedicated to providing an amazing car-buying experience and provide a large selection of high-quality vehicles. Our goal is to dramatically enhance the car buying and servicing experience for our customers by building relationships based on mutual respect and complete transparency. Family Car Group is interested in finding talented individuals who are looking for a rewarding and challenging career in the automotive industry. We offer an excellent benefit package and a great working environment with many different employment opportunities ranging from sales to service to management. If you want to set yourself apart from the ordinary routine of the average job, possess the unique ability to consistently provide outstanding customer service, and have a dedication to excellence. Apply today!

Job DescriptionCompany Description Express Oil Change & Tire Engineers is the pre-eminent automotive maintenance provider in the nation with over 400 locations across 21 states, leading our industry through excellence, innovation, and growth. Don’t let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services. Job Description The Hood Technician is responsible for inspecting and lubricating cars in a quick, yet thorough manner for customers in a professional and efficient manner. This position will adhere to and promote the Company mission while operating within the confines of the Company’s core values and contributing to the success of their functional team. Primary Responsibilities include (but are not limited to): • Complete work accurately and quickly allowing customers to remain in their vehicles, • Perform multi-point inspection, • Inspect vehicles for additional repairs needed, • Advise service consultant/tech for additional work, • Inspect fluid levels of power steering reservoir and transmission, • Inspect belts, hoses, and wiper blades, • Check air pressure of tires, • Maintain a safe, clean, and organized work areaQualifications We are looking for: • Knowledge in automotive repair and maintenance desired but not required, • Ability to read and comprehend written instructions and information, • Valid driver’s license, • Ability to pass a pre-employment drug test and background screen, • Effective communication and interpersonal skills, • Customer-focused attitude with ability to work well in a team environment, • Willingness to work Saturdays Additional Information All information will be kept confidential according to EEO guidelines. Physical Requirements: • Prolonged periods of standing, stooping, and bending, • At time, exerting 50 - 100 lbs of force occasionally and/or 10 - 25 lbs of force frequently and/or greater than 10 lbs of force constantly to move objects, • Requires working at a production rate pace entailing the constant pushing and/or pulling of materials By completing this application, you are agreeing that you are able to meet the physical requirements listed for this role.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237115

Job Description Paretti Land Rover of Baton Rouge is looking for experienced and career minded Technicians to join our team! We are a family-owned organization that has been in the New Orleans area for 90 years. We take pride in serving our customers as well as being involved in our surrounding communities. We are building a culture that is people focused which means we want to be “relational” versus transactional. Key Responsibilities: • Diagnose and repair vehicle mechanical and electronic issues., • Provide accurate time and cost estimates for repairs and service recommendations., • Adhere to safety procedures and guidelines to ensure a safe working environment., • Lead and mentor junior technicians, providing guidance and training when necessary., • Keep detailed records of all services and repairs performed., • Continuously improve service techniques to meet the highest industry standards. Required Skills and Qualifications: • Proven experience as an automotive technician, with a strong understanding of vehicle maintenance and repair procedures., • Minimum of ASE Certification preferred., • Previous Manufacturer Certification a plus., • Strong ability to diagnose and repair vehicles efficiently while maintaining quality and safety standards., • Road Test vehicles to quality check work performed as required., • Must be able to stay on top of technical bulletins that may apply to customer concerns., • Ability to work well both independently and as part of a team., • Follows manufacturer repair steps and processes for all required repairs, • Follow repair escalation process, • Adheres to all factory warranty requirements including time punches, accurate documentation, and parts returns., • Maintains cleanliness of vehicles., • Keeps work area clean including service bay, tools, toolbox, and surrounding areas., • Must be a team player with impeccable honesty and integrity. Benefits: • Competitive pay and benefits package, commensurate with experience., • Health, dental, and vision insurance., • 401(k) retirement plan., • Paid time off and holidays., • Employee discounts on vehicle purchases and services., • Factory Training and Certification including EV Certification. Why Paretti? At Paretti Land Rover Baton Rouge, we pride ourselves on being more than just another dealership. We truly care about our employees and recognize that hard work and dedication deserve to be rewarded. You won’t be just another number here—we value each team member as an integral part of our success. Join a team where your experience is valued and where you can make an impact. The intent of this job description is to provide a representative summary of the major duties and responsibilities performed by incumbents of this job. Incumbents may be requested to perform job related tasks other than those specifically presented. Career opportunities are dependent on business and staffing needs, as well as the qualifications of internal and external candidates.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Opportunity for advancement, • Training & development, • Vision insurance We own 4 Grease Monkey's and SpeeDee Oil Change & Auto Service locations in Baton Rouge, Kenner, Metairie and Covington and are adding more soon. Come grow with us. Store managers in Training also needed. We specialize in: --Low Price Tire Guarantee --Full Mechanical Repair including Electric/Hybrid cars The Lube/Tire Technician position requires an outgoing and smiling personality. This position reviews the manufacturers vehicle recommendations with the customer and completes the oil change. This position sales and installs fluid exchanges, filters and other preventive maintenance items. Additionally this position sales tires and mechanical work during the oil change process. The better you can communicate the information to the customer in a lucid and easy to understand way via our TRUST process, the more you can make. Salary & Hourly positions PLUS Weekly COMMISSION/BONUS Huge Growth Potential, ask us about it! TOP weekly pay Fantastic Happy TEAM 5 Day work week Saturdays required. No sundays Benefits/Perks • Growth Opportunities, • Locally Owned and Operated, • Safety You can Trust, • Medical/Dental/Vision/Life, • Training and ASE Certification, • Competitive salary, • Excellent work environment, • Tools ProvidedDo it today! All contacts with us are strictly confidential so you have everything to gain! Position Overview During the Full Service Oil Change, The Hood technician position requires an outgoing and smiling personality. The hood technician reviews the manufacturers vehicle recommendations with the customer and completes the oil change. Essential Duties and Responsibilities • Communicate effectively with Customers, • Keep work area clean and organized. Protect pit opening with bay net when not occupied by vehicle, • Use Echo System, • Perform visual inspection of vehicle, document any unusual conditions, • Obtain correct oil filter, Drain oil, Inspect oil drain plug and gasket., • Check/fill gear boxes, • Perform additional services, such as fuel filters, transmissions and differentials, when applicable, • Assist with performing pressure and leak check, • Perform visual inspection of belts, hoses, and other hood compartment components, document unusual conditions. Assist with performing pressure and leak check, • Assist with final safety and quality checkOther Duties and Responsibilities In addition to the duties listed above, every crew member is responsible for general center maintenance and cleaning duties such as mopping, washing center windows, lawn mowing, clearing litter, snow and ice from the site, and cleaning restrooms. Crew members must attend crew meetings and run errands as required, as well as other duties assigned by a supervisor. Job Qualifications • Customer service skills Basic literacy (ready, writing, math skills) Verbal communication skills, • Ability and license to operate motor vehicles, • Ability to properly use mechanical hand tools, • Attention to detail, • Previous experience or training - Minimum 3 months actual experience or supervised training as a lube technician requiredWorking Conditions Materials Used: Automotive oils, fluids and lubricants. Environment: Frequent exposure to outside weather elements, noise, and vehicle exhaust fumes throughout the entire shift. Physical Activities: Position requires good corrected vision, hearing, frequent standing, walking, climbing, stooping, crouching, handling, reaching, and lifting. Benefits/Perks • Discounted Services for Employees, • Flexible Hours, • Opportunities for Advancement

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc240647

Job DescriptionBenefits/Perks • Career path & Advancement Opportunities, • Competitive Compensation, • Paid time off, • Paid holidays, • Performance Based bonuses, • Paid training, • Company discounts, • Quarterly Tool Stipend, • 401K Plan with company match, • Health Insurance, • Supplemental Insurance (Dental, Vision, Short and Long Term Disability, etc.), • Life InsuranceCompany Overview Do you have extensive experience and technical expertise in the automotive industry? Are you looking for a company that invests in its employees, technology, and equipment? If so, this is the place for you! We are seeking a Top Level Automotive Technician to join our exceptional team. Responsibilities • Review work orders and discuss them with service advisors as needed, • Inspect vehicles and diagnose problems., • Provide an estimate of time and parts needed for repair/maintenance, • Perform quality repair and maintenance work on automotive systems, • Install equipment, components, and systems, • Record diagnostic findings, safety concerns and maintenance recommendations on Vehicle Inspection.Qualifications, • Minimum of 2 years of automotive repair experience, • Exceptional knowledge of automotive systems, • Competency with shop equipment, alignment systems, and other necessary industry equipment, • Excellent time management, problem solving, and communication skills., • Ability to work in a fast-paced and team-oriented environment, • Own all necessary tools to complete most automotive tasks, • Valid drivers license

Job Description Precision Tune Mechanic PT01C Technician Hourly or Flat Rate Full or Part Time Pay: $10 to $18 Join the Precision Tune Auto Care Team! We are a locally owned business with a tight-knit, highly trained team that takes pride in delivering top-notch service—both in the shop and at the counter. Many of our team members have been with us for years. We are committed to continual improvement and ongoing training, including out-of-state opportunities. We willingly invest our time because we take pride in mastering our craft. Our shop is clean, well-equipped, and designed for efficiency, allowing us to provide the highest level of service to every customer who trusts us with their vehicle. We’re looking for star players who want more than just a job—individuals seeking a real career, a stable and comfortable living, and the chance to grow as one of the top professionals in the automotive industry. Lube Tech-Join our dedicated team! We are looking for a Lube Tech who is responsible for performing routine vehicle maintenance services to ensure customers' vehicles run smoothly and efficiently. Be part of a team that is serious about their craft, serious about serving people, and serious about making a difference in the community. Join a family that values professionalism, growth, hospitality, and giving back. What We Offer: • Competitive hourly pay, • Medical, Dental, and Vision Insurance — coverage begins the 1st of the month after your hire date, • Paid Time Off (PTO) to relax and recharge, • Closed evenings and Sundays — enjoy a better work-life balance, • 5 paid holidays offWhat You’ll Do, • Perform routine maintenance services such as oil changes, lubrication, and fluid checks., • Inspect vehicles for maintenance issues and report any concerns to the service advisor., • Maintain a clean and organized work environment., • Follow all safety procedures and guidelines to ensure a safe working environment., • Assist with other maintenance tasks as needed to support team efficiency., • Provide excellent customer service by communicating clearly and professionally with customers and team members., • environmental proceduresWhat You Bring, • Previous experience as a Lube Technician or in a similar automotive service role is preferred., • Basic knowledge of automotive maintenance and safety standards., • Ability to work in a fast-paced environment and handle physical work., • Strong attention to detail and commitment to quality workmanship., • Good communication and interpersonal skills., • Valid driver’s license and reliable transportation.Physical Requirements, • Lift and carry up to 50 lbs. without assistance, • Stand, walk, bend, kneel, and reach frequently during the workday, • Safely operate vehicles and automotive tools, • Communicate effectively in person and by phone, • Enter and retrieve data from a computer system All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243115

Job Description Master Automotive Service Technician Are you ready to work with Advisors who can actually sell your work and the best Auto Service Professionals around? Take a look at our reviews and see for yourself why we're one of the most trusted shops in the area! Pay: $70,000 – $120,000 per year Benefits: Health, Dental, Vision Insurance; 401(k) with company match; Paid Time Off; Employee discounts on parts and labor Schedule: Monday – Friday, No Weekends About L&S Automotive: L&S Automotive is a premier automotive repair shop in Baton Rouge, LA, with over 25 years in business. Our team of skilled technicians delivers high-quality service for a wide range of vehicles, from routine maintenance to complex repairs. We take pride in exceeding customer expectations and fostering a professional, supportive work environment for our employees. Position Summary: We are seeking an experienced Automotive Service Technician to join our team. This role offers the opportunity to work on a variety of vehicles, tackle challenging repairs, and provide excellent customer service. If you are passionate about cars, enjoy problem-solving, and thrive in a fast-paced team oriented environment, we want you on our team. Key Responsibilities: • Perform routine maintenance and vehicle repairs, including diagnostics and troubleshooting, • Provide accurate estimates for services and repairs, • Complete repairs efficiently while maintaining high-quality standards, • Ensure customer satisfaction through professional service and communication, • Maintain a clean and organized work environment Qualifications: • Minimum 5 years of experience as an Automotive Service Technician, • Strong diagnostic, problem-solving, and mechanical skills, • Excellent communication and teamwork abilities, • Ability to work efficiently in a fast-paced environment, • Completion of an automotive technology program preferred, • ASE certification preferred Why Join L&S Automotive? • Competitive pay with opportunity for growth, • Comprehensive benefits package, • Supportive, team-oriented work environment, • Opportunities to develop your skills and advance your career L&S Automotive is committed to excellence, integrity, and delivering top-tier automotive service. If you’re ready to take your career to the next level, apply today —call or text (225) 228-4117 to connect with our hiring manager. We fully understand that the person we are looking for likely already has a job. If you are reading this and you don't feel like you are respected, treated fairly, or cared about at your current job, we need to talk. #hc213887

Job Description With a qualified and experienced executive board, sales team, and service team, Mid-South Equipment proudly serves the Gulf South. All Mid-South Equipment, sales personnel have real-world experience working on or with HVAC equipment and are members of ASHRAE. Mid-South Equipment Sales & Services is pleased to announce our LAUCP & SLDBE (disadvantaged business enterprise and a small business element) certification by the Louisiana Department of Transportation (LADOTD) as well as the City of New Orleans. With these certifications we are eligible to fulfill both the City and State's minority business participation goal for city, state and federally funded contracts. Mid-South Equipment is a recognized manufacturer's representative for many top brand HVAC manufacturing companies throughout Louisiana and the Mississippi Gulf Coast. We seek out and work with the manufacturers we represent to deliver the best quality products possible to the customers we serve. Reports to: Area Service Manager FLSA Status: Non-Exempt The Opportunity We are seeking an experienced Commercial HVAC Service Technician. This position will be responsible for performing electrical and mechanical inspection, start-up maintenance on the equipment we sell. This is a full-time opportunity for an energetic go-getter. An ideal candidate will be customer service oriented and work well with others. Position requires a high level of correspondence with Project Managers, Service Coordinators and customers. Responsibilities • Performs electrical and mechanical inspection and maintenance on equipment to ensure peak performance, • Perform specific preventative maintenance including belt adjustments, oiling, greasing and cleaning of equipment, • Uses experience and technical skills with preventive maintenance and system operations to determine service requirements, • Ability to interpret engineering drawings in reference to layout, location and operation of the system(s), • Represents the company in a positive manner to other trades, contractors and owners, • Advises owner/representative of preventive maintenance inspections performed and corrective actions to be taken, • Suggest additional services that are beneficial to customer, • Works in a team-based environment to share information and workload while ensuring customer satisfaction, • Submits required paperwork to Service Coordinator in a timely manner, • Must work in a safe manner on a daily basis and ensure that all safety measures are taken at all times, • Performs other duties as assigned, • Flexibility to work overtime/ weekends, as required Qualifications • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Strong VRF Technology - (Specifically LG, Diakin, Mitsubishi, Etc.), • Must have current HVAC certification and OSHA 10 Training plus 5+ years' experience working as a Service Technician in a commercial environment, • Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad), • Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds, • Ability to work independently with minimal supervision and balance requirements of multiple and varied duties Other Skills & Abilities Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job DescriptionWe are looking for a personable, experienced HVAC service technician who loves to problem solve to join our team. You'll be responsible for a variety of work orders, visiting homes and businesses to work on HVAC, indoor air quality, refrigeration, and control systems. The ideal candidate has the technical skills to identify and isolate problems, is familiar with using hand and power tools, and has strong communication skills to explain what needs to be repaired, replaced, or installed, and why. When necessary, you’ll upsell customers on preventative maintenance plans and indoor air quality products and services. Ready to join our growing HVAC company? Apply today!Compensation: 65000 Responsibilities: • Certify newly installed components properly function, • Identify and fix HVAC problems, including component replacement and installation, • Fulfill preventative maintenance and warranty services for customers, • Present customers with a total for the HVAC services, repairs, and installation, • Enter completed projects and the parts used into the database Qualifications: • Applicant must have required local and state HVAC tech licenses, • Applicant must have high school diploma or equivalent, • Certification or associate’s degree from an HVAC program at a technical school or 1+ years experience in the field as an HVAC helper or equivalent, • Must have valid driver’s license and clean driving record, • EPA 608 refrigerant recovery certification required About Company We offer an appealing atmosphere and welcome a wide variety of guests from many different backgrounds. From business travelers to sports enthusiasts and conference attendees, our guests have a range of reasons to travel to Baton Rouge. We strive to give each of them a positive impression, starting with their interactions with associates of our hotel.

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TAG Refrigeration is seeking Refrigeration Service Technicians for commercial service work in and around the Baton Rouge, LA area Role Summary: The Journeyman Refrigeration Service Technician performs commercial service, maintenance, and repair on refrigeration systems including walk-ins, self-contained units, single systems, and rack systems. This role supports grocery and retail locations, ensuring systems operate safely and efficiently. Roles and Responsibilities: • Diagnose, repair, and maintain commercial refrigeration systems (self-contained units, walk-ins, single systems, rack systems)., • Troubleshoot electrical and mechanical refrigeration components., • Perform preventative maintenance on HVAC and refrigeration equipment., • Complete minor plumbing repairs (walk-in drains, case drains, cooling towers, water-cooled condensers)., • Inspect refrigeration, electrical, and plumbing systems to identify service needs., • Communicate service updates with store managers and directors., • Provide repair estimates and recommend equipment replacement when appropriate., • Maintain van stock, tools, and required safety equipment. Skills and Qualifications: • 2-5 + years of HVAC/R experience, • Strong diagnostic and mechanical skills, • Professional communication abilities, • Attention to detail and strong decision-making skills, • Ability to participate in on-call rotation, • Ability to pass physical, drug screen, background check, and MVR review Preferred Qualifications: • Universal EPA Certification, • Electrical license, • 2–3 years minimum of grocery refrigeration experience, • HVAC/R technical school or related certifications Benefits: • Competitive pay, • Medical, dental, and vision insurance options, • Retirement savings plan with company contributions (401(k) or equivalent), • Paid vacation, holidays, and sick time, • Year-round, steady work, • Opportunities for career growth advancement, • Supportive, team-based work environment

Job DescriptionSalary: Job Summary Responsible for HVAC and mechanical building systems, utilizing knowledge of refrigeration theory, control systems, pipe fitting, and structural layouts. Skills and Experience Five to seven years related experience and/or training. Essential Functions and Duties (including but not limited to) • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction., • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Determines parts to order for repairs and timeliness of need., • Uses power tools and computers., • Identifies, analyzes, and repairs equipment, instruments and products at the customers location(s)., • Performs preventive maintenance and modifications as needed or requested by the customer., • Seek out and submit Work Change Authorizations based on customer need., • Maintains company vehicle by keeping records of service manuals, schedules with warehouse manager required maintenance and repairs., • Ability to get along with others., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all product offerings concerning installation, operation, maintenance, service and repair, • Provides technical support to customer., • Ability to use provided software applications to document customer calls, labor and work performed. Education • Associates Degree or equivalent from two-year college or technical school with a certificate in Heating, Ventilation, and Air Conditioning; or equivalent experience., • EPA approved Universal Technician Certification

Job DescriptionBenefits: • 401(k), • Company car, • Competitive salary, • Dental insurance, • Health insurance, • Training & development, • Vision insurance Job Summary: We are seeking a skilled and experienced Commercial Refrigeration Technician to join our team. The ideal candidate will be responsible for installing, maintaining, and repairing commercial refrigeration systems in various settings such as supermarkets, service stations, and industrial facilities. Benefits/Perks • Competitive pay based on experience., • Health, dental, vision, supplemental and life insurance., • Paid time off (PTO)., • 401(k) retirement plan with company match., • Company-provided vehicles, some tools, and phone allowance for work purposes.Responsibilities:, • Install, repair, and maintain commercial refrigeration systems., • Diagnose and troubleshoot mechanical failures in HVAC and refrigeration systems., • Perform routine maintenance to ensure optimal system performance., • Inspect system components, including compressors, condensers, evaporators, and expansion valves., • Recover and reclaim refrigerant in compliance with EPA regulations., • Conduct safety inspections and adhere to safety regulations., • Maintain accurate records of repairs, replacements, and service logs., • Provide excellent customer service while on-site at clients' facilities.Qualifications:, • Minimum of 3 years experience as a commercial refrigeration technician., • EPA Section 608 Technician Certification (Type II or Universal preferred)., • Strong knowledge of refrigeration cycles and parallel rack systems., • Proficiency in reading and interpreting blueprints and schematics., • Excellent problem-solving and troubleshooting skills., • Valid driver's license and clean driving record., • Must be able to pass a drug screen., • Physical ability to lift heavy equipment and work in various weather conditions.Skills & Competencies, • Reliability and strong work ethic., • Advanced mechanical proficiency and spatial thinking skills., • Good communication skills for interacting with clients and team members., • Ability to work independently or as part of a team.

Job Description Job Description: The Maintenance Technician position is responsible for maintaining the physical integrity of the community at all times. The successful candidate will have a minimum of 2 years of maintenance related experience including but not limited to; plumbing, electrical, HVAC, and carpentry. Weekend availability and call out time on a rotating basis is required. Job Duties and Responsibilities: • Apartment make ready process for vacant units, • Completion of assigned work orders for repairs and improvements, • Appliance repairs, plumbing, electrical, some HVAC, carpentry, locks and sheetrock maintenance and repair duties, • Property and vacant unit inspections, • Use of basic hand tools and power tools, • Assist with keeping the parts and storage areas organized and secured, • Perform preventative maintenance tasks as needed, • Additional duties as assigned Qualifications: • Minimum 1 year of apartment/multi-family experience, • Minimum 2 years of maintenance specific experience, • Customer service oriented, • Strong interpersonal and communication skills+ Vintage Realty Company provides a competitive benefits & compensation package. All candidates must be able to prove eligibility to work in the United States and willing to complete a criminal background & drug screening process as successful completion is necessary before an employment offer is granted. If you are interested in furthering your career in with a progressive successful firm, please submit your cover letter and resume along with contact names and numbers of three professional references. We are an Equal Opportunity Employer.

Job Description We are currently seeking an HVAC Technician to join our team! You will be responsible for completing work orders and other required tasks. Responsibilities: Complete work and repair orders in a timely fashion Estimate time and extent of repairs Perform routine preventive maintenance Maintain material and supply inventory Qualifications: HVAC and Electrical experience Previous experience in HVAC maintenance. Familiarity with maintenance tools and equipment Ability to handle physical workload

Job Description Division: 108 - BTR-SVC Position: Overhead Crane Technician Reports To: Branch Manager Employee Type: Full-time Pay Range: $20.00-25.00 an hour Key Responsibilities and Accountabilities: • Troubleshoot, repair and inspect overhead cranes and hoists., • Perform scheduled preventive maintenance activities on equipment., • Support customers by effectively interfacing with customer and office in repairing equipment as needed., • Evaluate and make recommendations regarding required repairs for customers., • Maintain rapport with customers by examining complaints; identifying solutions; suggesting improved methods and techniques; and recommending system improvements., • Service overhead crane systems by performing quality installations; performing OSHA/ANSI equivalent inspections; documenting and completing warranty work; troubleshooting breakdowns; performing preventive maintenance; and responding to repair calls., • Document service and installation actions by completing forms, reports, and inspection checklist., • Builds and maintains customer confidence by maintaining good response time, informing customer of problems, and completing the job in a timely manner., • Maintain professional presentation, timeliness, appearance, and organization in all areas. Required Skills and Knowledge: • Ability to work under pressure and deadlines., • Ability to work independently., • Ability to fabricate and weld structures, • Ability to perform inspections to OSHA/ANSI criteria, • Ability to troubleshoot electrical circuits, • Ability to assemble and repair complex machinery, • Excellent communication skills, • Ability to work at heights., • Willingness to travel, • Safety oriented, • Maintain confidentially, • Quality and results driven, • Good driving record Equipment used to perform job: Hand tools; power tools; lift equipment; material handling equipment; fabrication equipment, electrical meters and equipment, survey equipment; ear plugs; steel-toed shoes; gloves; safety glasses; lanyard; and body harness Company DescriptionAce Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.Ace Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.

Job Description Job Title: Maintenance Technician II – Mechanical & Robotics Job Description This temporary Maintenance Technician II role supports a highly automated distribution facility by installing, maintaining, and repairing material handling, automated packaging, and robotic equipment. You will troubleshoot electrical, mechanical, and pneumatic systems, perform preventative maintenance, and help ensure that high-speed conveyor and automation systems operate safely and efficiently. Responsibilities • Install, inspect, repair, and maintain material handling equipment such as automated conveyor systems., • Troubleshoot and repair electrical, mechanical, and pneumatic systems on high-speed, automated, and robotic equipment., • Perform preventative maintenance routines on material handling and automation equipment, following established documentation and procedures., • Complete and record preventative maintenance activities, including updating PM sheets and related documentation., • Perform battery changes and conduct preventative maintenance on industrial batteries as required., • Enter downtime and maintenance data into the daily log in an accurate and timely manner., • Manage and update work orders within a Computerized Maintenance Management System (CMMS)., • Troubleshoot equipment issues, identify root causes, and implement effective corrective actions., • Track, organize, and store department inventory, including spare parts and maintenance supplies., • Work safely around high-speed automated and robotic equipment while following all safety policies and procedures., • Support the operations maintenance team by responding to equipment issues and helping minimize production downtime. Essential Skills • Hands-on experience in industrial maintenance, including repair and upkeep of material handling and automation equipment., • Proficiency in troubleshooting and repairing electrical, mechanical, and pneumatic systems., • Experience working with automated conveyor systems in a high-speed distribution or manufacturing environment., • Ability to read and work with schematics related to mechanical, electrical, and pneumatic systems., • Demonstrated capability to perform preventative maintenance on conveyors, batteries, and related equipment., • Working knowledge of basic electrical components and their functions within industrial systems., • Experience using a Computerized Maintenance Management System (CMMS) to manage and close work orders., • Strong troubleshooting skills to identify equipment problems and determine appropriate repairs., • Ability to accurately enter downtime and maintenance information into logs and PM documentation., • Organizational skills to track and manage spare parts and maintenance inventory. Additional Skills & Qualifications • Background in conveyor maintenance, equipment maintenance, or industrial maintenance in a fast-paced environment., • Comfort working with high-speed automation and robotic equipment., • Ability to follow detailed maintenance procedures and safety guidelines., • Strong attention to detail when documenting maintenance activities and equipment status., • Capacity to work independently as well as collaboratively within an operations maintenance team., • Willingness to learn and participate in formal training on high-speed automation and robotics. Why Work Here? You will join a large, growth-oriented organization that invests heavily in training and development on cutting-edge high-speed automation and robotic technology. The environment offers clear paths for advancement, with strong internal mobility and a track record of promotions for high performers. With an extensive network of facilities across the country, you can explore opportunities for travel and future career moves. The company emphasizes measurable performance, providing clarity around expectations while avoiding micromanagement, and supports your long-term development through structured learning and skill-building programs. Work Environment You will work in a large, modern distribution facility equipped with high-speed, automated, and predominantly robotic material handling systems. The role is physically active and requires comfort walking significant distances, with expectations of walking approximately 10,000 steps per day and safely handling loads up to 49 pounds. Performance is measured through data and system-based metrics to ensure expectations are clear and progress is transparent, without day-to-day micromanagement. The position requires flexibility to work any 10-hour shift as needed by the operation. You will regularly interact with conveyors, automation equipment, industrial batteries, and computerized maintenance tools, including a CMMS, in a fast-paced and safety-focused environment. Job Type & Location This is a Contract to Hire position based out of Baton Rouge, LA. Pay and Benefits The pay range for this position is $32.50 - $32.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Baton Rouge,LA. Application Deadline This position is anticipated to close on Jun 11, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionSalary: POSITION TITLE: Porter MANAGER: Property Manager GENERAL DESCRIPTION: The Porter is responsible for keeping the grounds, interior, and exterior common areas, vacant apartments, sidewalks, and alleyways of the property in a clean and safe condition. The Porter also assists in other types of maintenance when necessary. QUALIFICATIONS: Education: High School diploma or General Education Degree (GED) Experience: 1-2 years minimum previous general apartment or institutional housekeeping experience preferred, but not required Abilities: Must be a well-organized self-starter Knowledgeable of equipment (vacuum, mop, broom, etc.), chemicals, and general protocols used for cleaning Prompt and dependable with the ability to maintain a daily cleaning schedule Ability to understand and complete directives provided by the manager or lead Maintenance Technician Employee must have dependable transportation, a valid drivers license, smartphone technology, and proof of auto insurance ESSENTIAL JOB FUNCTIONS/RESPONSIBILITIES Demonstrate a pleasant demeanor on the job. Assist with tracking and communicating inventory levels as required for the products and equipment needed to perform duties. Perform light maintenance duties such as changing light bulbs and air conditioner filters Ensure that equipment and supplies are maintained in a safe, clean, and organized manner. Immediately respond to spills or accidents which may present a safety hazard and, if appropriate, place caution signs alerting others to the hazard. Monitor and clean all exterior and interior common areas. Note and report any repairs and safety hazards that they cannot resolve to the site manager. Exhibit behavior that is consistent with the Vision, Mission, and Core Values of GCHP; make the working environment enjoyable for self and others.

Job Title: Optical Gas Imaging (OGI) Technician Location: Nationwide Travel (Based in U.S.) Job Type: Full-Time Schedule: • 5 days x 8-hour shifts or 4 days x 10-hour shifts, • Monday-Friday with weekend travel as needed Work Location: On the road (travel required weekly) Position Summary: Alliance Technical Group is hiring an Optical Gas Imaging (OGI) Technician to join our growing team! The OGI team is responsible for performing inspections on various types of facilities in the Oil and Gas Industry to identify and quantify gas leaks and vents. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations with all travel expenses paid. The work is conducted safely outdoors, in the field, sometimes at elevated heights, so you must love being outside. Looking for candidates with an understanding of oil and gas field operations and have experience in performing leak detection projects is a plus. OGI Certified Technicians will be given precedence. Can work independently or as part of a team. Key Responsibilities: • Conduct Optical Gas Imaging surveys in oil and gas production environments using FLIR or similar thermal imaging equipment (training provided), • Assist with emissions testing and related environmental monitoring tasks, • Operate and maintain field equipment and instrumentation, • Document findings and follow standard reporting procedures, • Adhere to safety protocols and client-specific site requirements, • Travel extensively to sites across the country, often in rural locations, • Collaborate with team members to ensure accurate data collection and client satisfaction Required: • Willingness and ability to travel weekly, • High mobility and flexibility to work in remote or rural areas, • Strong work ethic, attention to detail, and team collaboration Preferred Qualifications: • Experience using Optical Gas Imaging cameras, • Familiarity with oil and gas production equipment, • Background in oilfield maintenance mechanics or operations, • Experience working with tanks, batteries, compressor stations, or gas plants, • Valid driver's license and a clean driving record Employee Benefits: • Medical, Dental, and Vision Insurance, • Flexible Spending Accounts, • 401(K) Plan with Competitive Match, • Continuing Education and Tuition Assistance, • Employer-Sponsored Disability Benefits, • Life Insurance, • Employee Assistance Program (EAP), • Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st), • Profit Sharing or Individual Bonus Programs, • Referral Program, • Per Diem & Paid Travel, • Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $25-$30 per hour. Locations: Texas, California, Tennessee, Georgia, Illinois, South Carolina, Wyoming, Louisiana, Kansas, Colorado, Arkansas, New Mexico, Oklahoma, Pennsylvania, New Jersey, Ohio, Delaware, Indiana, Florida Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description SUMMARY: Dental Laboratory Technician specializing in partials and dentures responsible for the fabrication, modification, and repair of complete and removable partial dentures to restore oral function and appearance. Working from dental prescriptions, impressions, and bite registrations provided by dentists, they use traditional laboratory techniques alongside digital workflows, CAD/CAM systems, and 3D printing technology to produce accurate denture bases, framework components, wax setups, and final prostheses. STANDARD RESPONSIBILITIES: • Knowledge and understanding of Employee Handbook., • Carry out the meaning of the CSMD Mission and Vision statements., • Practice a culture of safety to reduce or prevent risk of injury, claims, loss, or liability by utilizing the Risk Management and Infection Control Plan., • Perform responsibilities with a high-quality standard to yield improved compliance, quality, and patient outcome measures by adhering to the Quality Improvement Plan., • Be present and ready for work as scheduled., • Attend in-service trainings, departmental meetings, and community events., • Work cohesively with team members. PRIMARY RESPONSIBILITIES: • Promote a welcoming environment by fluidly working with team members and greeting and acknowledging all patients., • Fabricate, modify, and repair dental prosthetics-including complete dentures and removable partial dentures-in accordance with written prescriptions from licensed dentists., • Interpret dental prescriptions, impressions, bite registrations, and digital scans to produce accurate, functional, and aesthetically appropriate prosthetic devices., • Utilize traditional laboratory methods and digital technologies, including CAD/CAM systems and 3D printers, throughout the fabrication process., • Select, prepare, and manipulate dental materials (acrylics, resins, metals, and digital materials) in compliance with clinical and quality standards., • Perform denture and partial repairs, relines, adjustments, and remakes as required., • Conduct quality assurance inspections to ensure proper fit, function, appearance, and compliance with prescription requirements prior to delivery., • Operate, maintain, and perform routine preventive maintenance on laboratory equipment, including 3D printers, curing units, milling machines, handpieces, and processing equipment, in accordance with manufacturer guidelines., • Accurately document equipment maintenance, calibration, troubleshooting, and service activities in maintenance logs or electronic systems to support regulatory compliance and operational continuity., • Management of all warranties on all laboratory equipment and machinery., • Maintain a clean, safe, and organized laboratory environment in compliance with infection control, OSHA, and material safety standards., • Document case work thoroughly, including materials used, fabrication steps, and quality control checks., • Management of any and all invoices and monthly statements for supplies or outside lab work., • Proper storage and record keeping of all patient cases through the delivery process., • Collaborate with dentists, dental staff, and laboratory personnel to resolve technical issues and support optimal patient outcomes., • Maintain current knowledge of best practices within the profession., • Maintain Certified Dental Technician (CDT) credentials, including required continuing education and adherence to standards established by the National Board for Certification., • Provide technical guidance or mentorship to non‑certified technicians or support staff, as applicable., • Maintains proper use of equipment and proper inventory management of supplies., • Assist in controlling the use of material and supplies necessary to perform job duties., • Perform other duties, as assigned.

Job Description Join Our Dream Team as a Technician! We are seeking a highly skilled and experienced Automotive Professional to join our team. This role requires a strong understanding of automotive systems, excellent diagnostic and repair skills, and a commitment to providing outstanding customer service. Responsibilities: • Perform diagnosis, maintenance, and repair on a variety of vehicles, • Maintain a clean and organized work environment, • Communicate effectively with customers to explain repair recommendations and pricing, • Stay up to date on automotive technology and industry trends Requirements: • Minimum of 2 years of experience in the automotive industry, • ASE certification preferred, • Strong diagnostic and problem-solving skills, • Excellent customer service and communication abilities, • Ability to work in a fast-paced environment and multitask effectively If you meet the qualifications and are passionate about automotive repair, we encourage you to apply for this exciting opportunity. Please submit your resume and cover letter detailing your experience and qualifications. Thank you for considering joining our team.

Job Description We’re looking for a Diesel Technician to join our team! If you have experience working on Peterbilt trucks and Polar trailers, we want to hear from you. What You’ll Do: Perform diagnostics, repairs, and maintenance on Peterbilt trucks and Polar trailers Troubleshoot engine, electrical, brake, suspension, and trailer systems Complete preventative maintenance and DOT inspections Keep accurate service records and ensure high-quality workmanship What We’re Looking For: Experience as a diesel mechanic/technician (Peterbilt & Polar preferred) Strong knowledge of heavy truck and trailer systems Ability to use diagnostic tools and repair manuals CDL is a plus, but not required Strong work ethic and attention to detail What We Offer: Competitive pay (based on experience) Health, dental, and vision insurance Paid time off & holidays Ongoing training and career growth

Job Description Overview Join a Leader in Home Healthcare At Rotech Healthcare Inc., we’re more than a medical equipment provider—we’re a trusted partner in patient care. As a national leader in ventilators, oxygen therapy, sleep apnea treatment, wound care, diabetic solutions, and other home medical equipment, we empower patients to manage their health from the comfort of home. With hundreds of locations across 45 states, our team delivers high-quality products, exceptional service, and compassionate support that helps patients live more comfortably, independently, and actively. Whether you're a clinician, technician, or healthcare administrator, your work at Rotech directly improves lives. Explore more about our mission and services at Rotech.com. Responsibilities Hospital Liaison – Respiratory & DME Services Job Summary Are you passionate about patient care and experienced in healthcare coordination? We’re looking for a Hospital Liaison to serve as a vital connection between hospital staff and our home care services. In this role, you’ll work closely with Case Management and Continuing Care teams to ensure a smooth transition for patients requiring Respiratory Therapy and Durable Medical Equipment (DME) at home. You’ll coordinate discharge planning, facilitate timely equipment delivery, and educate patients and caregivers on safe equipment use. Essential Job Duties and Responsibilities (Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.) • Collaborate with hospital case managers, social workers, nurses, and physicians to coordinate patient discharges, • Ensure timely delivery and setup of respiratory and DME equipment at the point of discharge, • Educate patients and caregivers on proper equipment use and maintenance, • Maintain accurate documentation including referral forms, insurance verification, delivery tickets, and activity logs, • Support emergency equipment needs and troubleshoot issues as they arise, • Participate in quality improvement initiatives to meet company and JCAHO standards, • Maintain strong relationships with hospital personnel and serve as a trusted resource for discharge planning, • Provide in-service training and CEU programs as needed, • Represent the company at trade shows and professional events, • Travel to patient homes for equipment setup and follow-up using a company vehicle Why Join Us? • Make a meaningful impact on patient outcomes by ensuring safe and timely transitions to home care, • Work in a collaborative healthcare environment with supportive leadership, • Receive training on specialized respiratory and DME equipment, • Enjoy a dynamic role that blends clinical coordination, patient education, and fieldwork Qualifications Employment is contingent on • Background check (company-wide). Results will not be used automatically to disqualify individuals. Instead, the Company will conduct an individualized assessment that considers the duties of the position, the nature and timing of the offense, and any evidence of rehabilitation, in accordance with applicable laws., • Drug screen (when applicable for the position), • Compliance with healthcare facility credentialing process (when applicable for the position), • Valid driver’s license in state of residence with a clean driving record (when applicable for the position) Required Education and/or Experience • High school diploma or GED equivalent, required Preferred Education and/or Experience • Experience working with medical equipment or in a healthcare setting, • Familiarity with medical billing practices and insurance reimbursement, • Background in medical administration and record management, • At least three years of related work experience, • Knowledge of medical terminology Skills & Competencies • Perform basic mathematical calculations accurately, • Communicate clearly and professionally in English, both verbally and in writing, • Interpret and respond to various forms of communication (verbal, written, visual), • Handle sensitive information with discretion and confidentiality, • Stay organized, manage time effectively, and solve problems independently, • Work well both independently and as part of a collaborative team, • Maintain attention to detail while managing multiple tasks Technical & Equipment Proficiency • Use email and internet for communication and research, • Navigate Microsoft Outlook, Word, and Excel, • Operate standard office equipment (fax, copier, printer, phone, computer/tablet), • Safely load, unload, and secure equipment according to company policy, • Understand and operate home respiratory equipment and supplies, • Troubleshoot and perform basic mechanical repairs on equipment Physical & Environmental Demands • Lifting and transporting equipment (up to 65 lbs), • Sitting, standing, walking, talking, and listening throughout the day, • Close visual work with small print on screens and paperwork, • Regular contact with patients and equipment, with potential exposure to pathogens, • Driving a company vehicle for the majority of the workday

Job DescriptionCompany Description Louis Dreyfus Company is a leading merchant and processor of agricultural goods. Our activities span the entire value chain from farm to fork, across a broad range of business lines, we leverage our global reach and extensive asset network to serve our customers and consumers around the world. Structured as a matrix organization of six geographical regions and ten platforms, Louis Dreyfus Company is active in over 100 countries and employs approximately 18,000 people globally. Job Description Primary Responsibilities/Essential Functions • Maintains and repairs the control and instrumentation systems, including level transmitters, switches, probes, temperature transmitters and associated wiring, hazard monitoring systems, 24 V DC and 4/20 ma analog instrumentation circuits., • Works with plant operations to accomplish all tasks in a timely and safe manner., • Notifies Maintenance Supervisors of any production, maintenance or safety problems., • Knows, observes and enforces all Standard Operating Procedures, safety procedures and rules, environmental practices and GMP guidelines., • Responsible for troubleshooting and repair of all electrical systems and components in the facility., • Responsible for the repair of the electrical systems include, but are not limited to, variable speed drives, motors and motor control equipment, PLC and related equipment and power distribution equipment and turbines., • Performs pneumatic troubleshooting, including but not limited to: calculating ranges and set points for switches, transmitters, indicators, recorder and controllers., • Install conduit, wiring, panels, controls and other electrical components for machines and equipment., • Install and maintain light fixtures and related equipment., • Diagnoses and replaces faulty mechanical, hydraulic and pneumatic components of machines and equipment., • Makes the necessary corrections and running adjustments to maintain maximum production and quality., • Maintains thorough knowledge of all related equipment and attends training classes when available., • Applies root cause analysis theory and corrective action steps for continuous improvement., • Supports plant management efforts for improving production efficiencies with electrical resources., • Completes all required safety training and complies with all safety policies., • Follows all department procedural policies and participates in team concept approach., • Notifies supervisor and production management of product quality issues and shuts down equipment if product quality is out of specification., • Performs maintenance tasks to ensure compliance with quality and GMP requirements; always adheres to all equipment safety, quality, and GMP requirements., • Completes work orders on all work performed. Enters actual time, parts, or material used onto each work order., • Performs preventative maintenance tasks for equipment and facility in accordance with manufacturer's and/or engineering guidelines. JOB DESCRIPTION (Maintenance – E&I Technician) • Coordinates all PMs with manufacturing, quality control, and management., • Provide assistance to other maintenance employees as able and assigned, • Assist in the completion of capital and maintenance projects as able and assigned., • Look for opportunities to help work get done safer, faster and more cost effective., • Participate in company activities such as; Safety Committee, Audit committees, employee task forces, etc., when requested., • Required to work during the shutdown time to complete work orders., • When necessary, uses catwalks and/or ladders to clear any choke-ups from conveyors that cause the production line to stop., • Works assigned overtime as needed., • Perform any additional duties or tasks assigned by management. Additional Responsibilities • Keeps work area clean and free from all safety hazards which requires regular bending and occasional lifting., • Drives Company utility vehicles as necessary in order to perform tasks assigned by plant management, which may include but are not limited to: responding to plant or staff emergencies and/or picking up, dropping off or transporting parts, equipment, instruments, supplies and other materials necessary to ensure that the machinery and equipment in the plant remain in good working order., • Completes tasks as assigned by the Maintenance Superintendent, other plant Superintendents or Shift Supervisors., • Actively participates in Shift/Team activities including complying with best practices, standard operating procedures and development, maintenance and continuous improvement efforts., • Actively participates in job-related training as required. Company Conformance Statements In the performance of their respective tasks and duties all employees are expected to conform to the following: • Perform quality work within deadlines with or without direct supervision., • Interact professionally with co-workers, Company business associates and the general public., • Work together in a cooperative spirit to serve the best interests of the Company., • Operate in a fully responsible manner and comply with the law and Company policy. SHE Responsibilities • Maintains good working knowledge of SHE policies, rules, and procedures., • Ensures all applicable requirements are adhered to., • Completes required training for jobs and tasks prior to being assigned work., • Ensures area is maintained in orderly and safe manner., • Promptly reports unsafe working conditions to management and communicates potential hazards., • Promptly reports all incidents to management as soon as practicable; no later than 24 hours from time of incident. Operate in a fully responsible manner and comply with the law and Company policy.Additional Information Additional Information for the job What We Offer We provide a dynamic and stimulating international environment, which will stretch and develop your abilities and channel your skills and expertise with outstanding career development opportunities in one of the largest and most solid private companies in the world. • Comprehensive benefits program including medical, dental and vision care coverage, flexible spending account plans, employee assistance program, life insurance and disability coverage, • 401k with Company Match, • Family Friendly Benefits including childbirth and parental leave, fertility and family building benefits, • Paid Time Off (PTO) and Paid Holidays, • Flexible work available (not applicable to all roles) Diversity & Inclusion LDC is driven by a set of shared values and high ethical standards, with diversity and inclusion being part of our DNA. LDC is an equal opportunity employer committed to providing a working environment that embraces and values diversity, equity and inclusion. LDC encourages diversity, supports local communities and environmental initiatives. We encourage people of all backgrounds to apply. Equal employment opportunity (EEO) Louis Dreyfus Company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Sustainability Sustainable value is at the heart of our purpose as a company. We are passionate about creating fair and sustainable value, both for our business and for other value chain stakeholders: our people, our business partners, the communities we touch and the environment around us

Job DescriptionOverview Job Title: Senior PLC Technician/Engineer Experience: 8 years + Location: Baton Rouge, LA Schedule: Full-time Salary: $85,000.00 and up, depending on qualifications Classification: Exempt Summary: Leadership position overseeing the installation, programming, and maintenance of various Programmable Logic Controller (PLC) systems, and related automation solutions. Job Description This position requires the installation and maintenance of PLC systems and other electronic automation equipment. This involves analyzing requirements for installation, commissioning and inspecting systems hardware and software, troubleshooting and resolving problems, and managing the customer’s needs over the life of the relationship. This position requires technical acumen, the ability for critical analysis, and attention to detail with an emphasis on strong computer skills. This position requires the ability to travel to remote customer sites across the United States. Responsibilities • Lead programming and configuration efforts on PLC platforms (Allen Bradley preferred), • Perform detailed functional tests on systems integrated from different vendors, • Perform specialized installation and troubleshooting tasks and to maintain configuration databases under minimum supervision, • Concept design for new PLC systems (centralized, decentralized, dual redundant, safety systems, etc.), • PLC programming, testing, installation and commissioning as required, • Design of HMI and SCADA interface Requirements • 8 years plus of experience, • Strong computer, server, and networking skills and basic industrial instrumentation knowledge, • Some travel may be required, • Must have a valid driver's license, • Must be able to submit to and pass a drug/alcohol screening. Background check may be required for site requirements, • Must be able to comply with customer site requirements for access/entry, • Must be legally eligible to work in the U.S. and have a stable work history. Sponsorship is not availablePhysical Requirements, • Ability to lift 25+pounds periodically, • See, respond, and report to dangerous situations, • Bending, walking, climbing, kneeling, sitting, and standing for extended periods, • May be required to wear PPE/Safety gear at specific timesBenefits, • Medical, dental, and vision benefits with company contributions, • Retirement plan with matching contributions, • Generous Paid time off policy, paid holidays, • Long-term disability, life insurance, • Rewarding career with growth potential and opportunities About Us Enginuity Global is a leader in electrical engineering, automation + controls, and electrical and instrumentation field services. Our expertise delivers innovative solutions to maximize client operations and minimize downtime. Whether implementing a new system or improving the existing one, Enginuity Global’s approach encompasses both operations and engineering perspectives to get the most out of capital investments. Joining our team gives you experience in top-performing industrial facilities in the fastest growing markets in the country. We are looking for self-motivated, passionate, and hard-working professionals to grow our company. Equal Employment Opportunity Enginuity Global provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Powered by JazzHR 9QlQxjnGAO

Job Description Summary Throughout our 20-year history, we have worked hard to make CIS Industries an enjoyable and rewarding place to work. In addition to competitive salaries, comprehensive benefits, and tangible career growth, our people enjoy a stability and loyalty envied in the industry. With average employee tenure of 10+ years, our culture encourages people to maximize their skills and potential. Our company culture is professional yet relaxed; we understand that going to work every day should be a gift, not a burden. Join our growing team today! POSITION PURPOSE The Controls Service Technician role primarily involves starting up, trouble shooting and repairing complex controls on HVAC equipment consisting of primarily, but not limited to, Variable Refrigerant Flow (VRF) systems, dedicated outside air units, hot water boilers, computer room units, water source heat pumps, VAVs, packaged rooftops and split DX units. A service technician is also expected to meet with end-users monthly as part of service contracts to maintain their system and assist with their needs. This position in based out of Baton Rouge and requires out of state travel, up to 5% of the time. Controls Service Technician Job Skills: • Familiarity with instruments and the ability to acquire information such as temperature, humidity, static pressure, voltage, amperage, air flow, etc., • Understanding of control systems including wiring, thermostats, and end devices., • Perform troubleshooting steps of both IP and Serial Communication Protocols, • Effectively communicates verbally and in writing with customers and co-workers., • Able to read wiring schematics and diagrams for all equipment., • Effectively present training material to owners and contractors in a classroom environment., • Documents service and installation activities by completing work orders for each job, maintenance checklist and daily time sheets., • Maintains rapport with customers by addressing complaints and identifying solutions., • Maintains a safe and clean working environment by complying with established policies, procedures, rules and regulations., • Above average computer skills. Ability to learn and use proprietary software needed to start-up, configure or trouble shoot HVAC equipment., • Independently manages daily business needs by identifying parts to order for repairs and determines the urgency of the requirement., • Keeps current on products concerning installation, operation, maintenance, service, and repair of HVAC systems and components., • Flexibility to work outside normal work hours, as required. Qualifications: • Associate degree or equivalent from a Technical / Trade School with a certificate in Heating, Ventilation, and Air Conditioning and two (2) years related experience; or five (5) years related experience; or equivalent combination of education and experience., • Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e., Smartphone, iPad)., • Valid Driver's License with no major traffic violations for the previous 5 years. Physical Requirements • Routine sitting, lifting, bending, and kneeling, • Ability to lift 50 lbs. from floor to countertop and countertop to floor, • Ability to climb ladders and perform job duties at required heights Benefits: Benefits include paid vacation, 401K match program up to 4% of gross pay, Safe Harbor company contribution 3% of your annual salary, a company supplemented health insurance program, plus employer paid life insurance, short- and long-term disability. Dental and Vision options are available. Pay: Pay commensurate with job experience.

Job Description MMR Group, Inc is hiring for the Western Mission Critical District based out of our Corporate Office here in Baton Rouge, LA: Company Culture: At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including “Best Place to Work” and consistently being recognized as one of the top Engineering News Record’s “Annual Specialty Contractors.” All of which can be further explained on our website (https://mmrgrp.com/resources) by watching the provided videos. Organization Description: MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned “Open Shop” contractor in the United States with over 30 branch offices including global locations in Canada and South America. For more information, please visit our website: www.mmrgrp.com. Job Description: MMR is seeking HSE Western District Coordinator candidates looking to work full time out of our corporate office in Baton Rouge, LA. While this candidate will be located in Baton Rouge, LA, the district they cover is the Western Mission Critical Division (Phoenix, AZ, etc.). The responsibilities would include, but are not limited to, the following: • Report to the Vice President, HSE and or the HSE Director, works in conjunction with the Divisional and Project Managers, • Develop, revise, and implement safety training programs as needed and/or required, • Implement, track, and monitor MMR’s HSE Management System, • Conduct training throughout our company and support the corporate safety department’s training plan, • Maintain the training database, • Provide safety support to all jobsites, • Performing field audits, • Performing on-site re-training as required, • Performing follow-ups to ensure the training was understood by our employees, • Ensures that safety procedures are being followed by all employees, • Conduct safety meetings, • Meeting with clients on safety issues, pre-job meetings, and evaluations, • Assist in MMR & all required regulatory agency training for employees and supervisors, • Track information for use with supervisor’s performance reviews, and for employee re-training, • Assist in MMR’s Supervisor’s Safety Training, • Stay up to date and current on all regulatory agency regulations, • Assist in accident investigations along with the Safety Director and/or the superintendent, • Complete reports for MMR and client, • Escort insurance account representative to job sites for his evaluation as well as ours, • Implement, train, and maintain database on Behavior Based Safety, • Stay up to date and current on Client HSE standards, policies, and procedures, • Attend safety training as directed, • Commitment to the company goal of achieving a zero-injury culture; understand and follow company safety procedures, • Employee must be able to travel to and from the jobsite via personal vehicle or other public form of transportation Education and/or Experience Associate's degree (A. A.) in Occupational Safety & Health from an accredited university preferred but not required; or minimum five years related experience. OSHA 500 Train-The-Trainer certification or equivalent, OSHA 510 or equivalent. Certifications and/or Licenses Employee must possess proper forms of identification such as valid Driver’s License or State identification, and a Social Security Card. State and/or local license/certifications may be required. Certification which may be a plus: Certified Safety Professional (CSP), Associate Safety Professional (ASP), Occupational Health and Safety Technician (OHST), Construction Site Safety Technician (CSST), NFPA 70E knowledge Schedule: 40-hour workweek (M-F) with some overtime as needed MMR Group, Inc. and its affiliated companies ("MMR") is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class. Powered by JazzHR OCgpYWmpVr

Job Description Custom Truck One Source — Mobile Field Technician (Home-based in Louisiana 71303) Step into a day where your expertise keeps essential infrastructure moving. As a mobile field technician with Custom Truck One Source (CTOS), you’ll start from home, roll out in a fully equipped service truck, and tackle complex troubleshooting across the Gulf Coast. CTOS is a 30+ year industry leader with 40+ locations, 2,500+ employees, and a 10,000+ unit fleet serving utility, telecom, rail, and construction customers. Day in the life • Hit the road across Louisiana, Mississippi, East Texas, and Western Alabama to diagnose and repair specialized utility equipment at customer sites., • Work hands-on with bucket trucks, digger derricks, cranes, and service trucks—solving mechanical, electrical, diesel, and hydraulic issues., • Perform inspections (including DOT) and dielectric testing on rental, customer, and company units., • Use your company-issued laptop and credit card to manage work orders, parts, and travel logistics., • Expect frequent overnight travel (50%–80%+) with significant assignments along the Gulf Coast in oil, gas, and utility areas. What you’ll handle, • End-to-end troubleshooting, parts replacement, and field repairs on aerial, construction, and light/heavy-duty truck systems., • Preventive maintenance, safety checks, and compliance documentation., • Customer communication and coordination with the CTOS team to ensure uptime. Where you’ll thrive, • Independent problem-solver who enjoys being the expert on-site, yet collaborates well with a broader support team., • Comfortable working outdoors and on the move, adapting to varied field conditions. Requirements, • Valid Driver’s License (required); CDL Class B preferred., • Background with utility or heavy equipment such as Caterpillar, John Deere, Komatsu, and medium/heavy-duty trucks., • Proven mechanical aptitude and strong field troubleshooting skills. Tools and support from CTOS, • Company-provided, fully equipped service truck with crane, welder, and compressor., • Company computer and credit card to streamline field operations. Schedule and extras, • On-call rotation shared among 3–4 technicians (Monday–Sunday) with a $250 on-call bonus., • Work mix: approximately 70% CTOS rental equipment and 30% third-party customer work. Bring these strengths, • Heavy equipment repair, • Hydraulic systems expertise, • ASE Automobile & Light Truck certification testing familiarity, • Diesel and heavy equipment systems knowledge, • Electrical systems and diagnostics (heavy equipment), • Aerial and utility equipment systems, • Current CDL license experience, • DOT and equipment inspection compliance Equipment you’ll encounter, • Diesel Engines: Detroit Diesel, Cummins, PACCAR, • Diesel Vehicles: Ford, • Cranes: Konecranes, Terex, Manitowoc, • Boom Trucks: Terex, Altec, Elliott, National Crane, Load King, Manitex, • Digger Derricks: Terex, Altec, Elliott, • Boom Cranes: Link-Belt, Manitowoc, • Refuse Trucks and Service Trucks

Job DescriptionBenefits/Perks • Recession-Proof Industry Providing The Opportunity To Give Back, • Competitive Compensation and Benefits, • Industry Training and Advancement OpportunitiesCompany Overview Rytech is a nationally recognized leader in the water damage industry. Our principles are based on integrity and accountability. At Rytech you get a unique opportunity to work with Franchises across the country, third-party administrators, and carriers to create a seamless experience. If you love building relationships and creating quality results, Rytech is the place for you! Job Summary A Combo Water/Mold Technician is responsible for the daily service of mitigation assignments, as well as remediation assignments, New referrals, and existing, as well as customer and manager communications to accomplish their duties. Responsibilities • Be available by phone and email during scheduled on-duty hours, • Communicate daily with the Operations manager/Assistant OPS Manager, • Maintaining a company-issued vehicle, • Fleet Vehicle Handbook, SDS sheet, Equipment, Tools, Consumables, vehicle maintenance, • Maintain a daily update of all files in the MICA app, • Be available 24/7 when working on-call rotation, • Communicate daily with customers/Insurance personnel/other team members, • Maintain good time management with handling existing/new assignments, • Be able to listen and follow safety protocols, as well as wear proper PPE, • Be able to read and understand a mold remediation estimate to start new assignmentsQualifications, • Restoration (Mitigation, Remediation, Construction) experience a plus, • Experience working with Insurance claims is a plus, • Excellent communication and customer service skills, • Willing to travel in times of need, • CAT situations, • Helping other Areas, • Must be knowledgeable of Ipad features, • Must be able to listen and follow directions, • Must be able to lift and maneuver heavy equipment/contents, • IICRC Certifications a plus (WRT/ASD)

Job Description Ecoservices is dedicated to services that have a positive impact on our planet. Our Ecoservices business provides specialty grade high purity virgin sulfuric acid for a number of diverse and growing end uses. What we offer: • Competitive pay, • Full benefit package, • 401k matching, • Tuition Reimbursement Position Overview: The Instrumentation & Electrical (I&E) Technician is responsible for installing, troubleshooting, maintaining, and repairing electrical and instrumentation systems in a chemical plant environment. This role includes working with high- and low-voltage equipment, PLC systems, and process instrumentation while ensuring compliance with safety and regulatory standards. Technicians must be able to read schematics and P&IDs, perform physical labor, and support preventative maintenance and emergency response efforts as needed. What you will be doing: • Repair, install & troubleshoot electronic & pneumatic instrumentation & control equipment, as well as electrical work from 24V up to services involving 2300V., • Attends daily meetings to receive and discuss priority and routine work orders., • Selects, installs, and operates measurement devices such as O2 Analyzer, infrared photometers, carbon monoxide analyzers, pH analyzer, valves, transmitters for level, pressure, temperature, and flow., • Communicate with unit operations to ensure work site has been prepared and to avoid interfering with activities of other workers., • Inspect worksite to determine presence/root cause of obstruction or change in operational capabilities., • Communicates findings to supervisor and production supervisor as needed secondary to the nature of the problem, and the urgency of the repair to determine when planned maintenance will interfere with unit operations., • Assist in performing periodic preventive maintenance testing procedures on filters, various analyzers, leak testing, etc., • Performs research to identify availability of new technology to improve equipment efficiency and reliability., • Participates as a team member on research and development projects to upgrade operations and to assist in installing/monitoring new equipment., • Follows diagnosis of electrical layout, ensuring that concealed wiring is installed before completion of future walls, ceilings and flooring., • Pulls wiring through conduit. Splices wires by twisting or soldering wires together and applying tape or terminal caps., • Connects wiring to equipment such as lighting, motors, and instrumentation using hand tools. Required Qualifications: • High school diploma or a GED and 5 years in instrumentation and electrical experience OR One-year certificate from college or technical school and 3 plus years of experience, • Strong understanding of process control instrumentation, PLCs, and DCS systems, • Proficiency in reading schematics, P&IDs, and performing control loop checks, • Moderate computer skills; able to use MS Office and digital documentation tools, • Physically able to lift heavy equipment, climb, kneel, and work in confined spaces, • Must be able to work outdoors and in all weather conditions, • Completion of applicable safety and technical training including NFPA-70E and OSHA, • Valid and current Transportation Workers Identification Card (TWIC) is required

Job Description We are seeking an experienced DAS Technician to cover areas east of Texas. Travel a Must. Individual must reside in close proximity to a major airport. Job Responsibilities: DAS installation in both carrier and public safety spaces, with knowledge of OEM and connection types. Individual will be installing maintaining, and troubleshooting issues pertaining to coax cable, fiber optic cable, power cable, etc. Ability to terminate coax cable and power cable. Maintenance of test gear (Anritsu Sweep & PIM) to achieve passing results Cable Troubleshooting Line sweeping and PIM testing Fusion Splicing and Fiber testing. OSHA 10, CPR, First Aid and EMT desired. Qualifications: Individual MUST have experience adhering to schedules, following instructions, self-performing duties and working with professionalism with team members, clients, contractors, and vendors. 2-4 years DAS/telecom experience.Knowledge of Microsoft Word. Must maintain a clean background driving record. Drug testing at the discretion of Centerline Communications. Candidate must be able to work multiple shifts and away from home Ability to lift, squat, climb ladders, work above head, lift/maneuver up to 100lbs, stand/walk for long periods. Candidate must have ability to work outside in all elements, including but not limited to snow, rain, and varying temperatures. Ability to maintain a safe work environment Ability to lift, squat, climb ladders, work above head, lift/maneuver up to 75lbs, stand/walk for long periods Ability to read and understand construction drawings. #IND1

Job Description A Concrete Technician/Sidewalk Repair Technician is responsible for going to the job site daily and performing a survey or cutting an approved job. They are responsible for ensuring all trip hazards at each job site have been removed or marked for replace. Pay is hourly plus production rate. Duties: • Surveying: Techs are responsible for surveying various job sites. During surveying, they measure the cuts and identify them with a number using our bid technology., • Concrete Cutting: Techs are trained to remove trip hazards that have been previously identified. This involves using a portable generator with the proper equipment and using our patented technology and process to cut the hazards., • Reporting: Techs are required to report their work at the end of each day, in order to update the sales manager of the status of each job., • Training: At times, Techs are required to train other technicians. They are also expected to participate in frequent training in order to be up to date on the process and procedures of the company., • Maintenance: Each week maintenance must be performed to ensure all equipment is cleaned and functioning properly. Truck should be loaded in preparation for the next job, and all supplies needed be reported to sales manager. Qualifications: • At least 18 years old, • Experience with Power Tools, • Must have the ability to travel overnight occasionally, • Drivers License, • High School Diploma or equivalent, • Must be able to pass random drug tests, • Clean Shaven, • Able to perform manual labor About Us: Precision Concrete Cutting is based in Montgomery, Alabama and services all of Alabama, Tennessee, Louisiana, and Mississippi. We are the nation's leader in uneven sidewalk repair and trip hazard removal. Our patented process saves money for our customers, makes sidewalks ADA compliant, and eliminates trip hazards that could result in a liability. Our concrete repair service has won the trust of many clients residing in United States and Canada. Using our technology and equipment on sidewalk repair, we can decrease the cost compared to sidewalk replacement by 70-90%.

Job DescriptionCompany Description Express Oil Change & Tire Engineers is the pre-eminent automotive maintenance provider in the nation with over 400 locations across 21 states, leading our industry through excellence, innovation, and growth. Don’t let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services. Job Description The Pit Technician is responsible for inspecting and lubricating cars in a quick, yet thorough manner for customers in a professional and efficient manner. This position will adhere to and promote the Company mission while operating within the confines of the Company’s core values and contributing to the success of their functional team. Primary Responsibilities include (but are not limited to): • Complete work accurately and quickly allowing customers to remain in their vehicles, • Perform multi-point inspection, • Advise service consultant/tech for any additional work needed, • Service grease fittings, universal joints and steering knuckles, using hand or compressed air powered grease gun, • Inspect fluid levels of rear differential and rear axle housings, • Inspect vehicles for additional repairs needed, • Demonstrate behaviors consistent with the company’s vision, mission, and core values in all interaction with customers, co-workers, managers, and suppliers, • Adhere to all company policies, procedures, and safety standards, • Maintain a safe, clean, and organized work areaQualifications We are looking for: • Knowledge in automotive repair and maintenance desired but not required, • Ability to read and comprehend written instructions and information, • Valid driver’s license, • Ability to pass a pre-employment drug test and background screen, • Effective communication and interpersonal skills, • Customer-focused attitude with ability to work well in a team environment, • Willingness to work Saturdays Additional Information All information will be kept confidential according to EEO guidelines. Physical Requirements: • Prolonged periods of standing, stooping, and bending, • At time, exerting 50 - 100 lbs of force occasionally and/or 10 - 25 lbs of force frequently and/or greater than 10 lbs of force constantly to move objects, • Requires working at a production rate pace entailing the constant pushing and/or pulling of materials By completing this application, you are agreeing that you are able to meet the physical requirements listed for this role.

Summary: The role of Gauge Assembly Technician involves adhering to Company Quality Standardization Procedures, reviewing and comprehending technical drawings, and performing setup and assembly of gauge components for various applications. Responsibilities include reading and interpreting gauge assembly schematics, maintaining equipment and ensuring a clean and safe work area, following written and verbal instructions, assembling and calibrating gauge components to manufacturer specifications, and measuring and marking reference points on workpieces. The role also requires performing routine maintenance tasks on equipment, operating manual assembly tools as needed, and having knowledge of basic measuring tools such as calipers, dial indicators, and micrometers. Additionally, there is an introductory learning component for various measuring instruments, including pressure gauges, temperature gauges, and flow meters. Responsibilities: \n • Follow Company Quality Standardization Procedures for all aspects of the gauge assembly process \n, • Review and comprehend technical drawings \n, • Setup and assembly of gauge components for various applications \n, • Read and interpret gauge assembly schematics \n, • Maintain equipment and ensure work area is clean and safe at all times \n, • Follow written and verbal instructions \n, • Assemble and calibrate various gauge components to manufacturer specifications \n, • Measure, mark, or scribe reference points on workpieces as guides \n, • Perform routine maintenance tasks on equipment as required \n, • Operate manual assembly tools as needed \n, • Knowledge of basic measuring tools (calipers, dial indicators, micrometers) \n, • Introductory learning of various measuring instruments (pressure gauges, temperature gauges, flow meters) \n\n Positional Requirements & Qualifications: Education & Experience \n • HS Education or GED Equivalent a plus \n, • Assembly degree preferred \n, • Up to 1 year industry experience \n\n Skills & Abilities \n • A clear understanding of assembly safety \n, • Demonstrates proper use of Personal Protective Equipment (PPE) \n, • Proper knowledge to operate assembly equipment \n, • Basic OSHA and TWIC card (TWIC, only if required) \n, • Basic oral & written communication skills \n, • Ability to convert fractions to decimals efficiently and vice versa \n, • Demonstrated "can do" attitude \n, • Must be able to travel and have a clear driving record in accordance with company driving guidelines \n, • Clear background check and drug/alcohol screening \n\n Essential Physical Functions \n • Lifting: up to 50 pounds \n, • Adjusting or moving objects up to 50 pounds in all directions \n, • Lift and carry: 50 pounds for 100 feet \n, • Bending, stooping, walking and climbing stairs \n, • Able to pass periodic medical evaluations and respirator fit tests to ensure continued compliance with OSHA standards. \n, • Ascending or descending ladders, stairs, scaffolding, ramps \n, • Moving self in different positions to accomplish tasks in various environments including tight and confined spaces \n, • Remaining in a stationary position, often standing or sitting for prolonged periods \n, • Moving about to accomplish tasks or moving from one worksite to another \n, • Communicating with others to exchange information \n, • Repeating motions that may include the wrists, hands and/or fingers \n, • Operating machinery and/or power tools \n, • Operating motor vehicles or heavy equipment \n, • Assessing the accuracy, neatness, and thoroughness of the work assigned \n, • Required physical ability if mandated by customer or regulatory requirements \n\n This job description is intended to describe the general nature and level of the work being performed. This is not an exhaustive list of all duties and responsibilities. The company reserves the right to amend and change responsibilities to meet business and organizational needs as necessary.