Service technician jobs in Baton Rouge, LouisianaCreate job alerts

Provide appropriate, efficient and timely pre-hospital basic life support care and transportation of the sick and injured in accordance with local, state, national and Acadian Ambulance standards of practice. DUTIES AND RESPONSIBILITIES: This job description is not intended, nor should it be construed, to be an all-inclusive list of responsibilities, duties, skills or working conditions associated with the job. It is intended to be a general description of the essential duties and requirements common to positions of this type and may be subject to change. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Conducts a careful examination of the patient for signs and symptoms of illness/injury and assists other medical personnel as necessary., • Administers prompt and efficient basic life support care within the limits of licensure or certification and in accordance with approved protocols prior to and during transport., • Provides careful handling of the patient to and from the ambulance., • Provides safe and efficient transport of the patient in the ambulance to the medical facility., • Provides a safe and efficient transfer of patient and patient care information to the receiving personnel at the destination., • Documents all aspects of patient condition and treatment on EMS run reports. Obtains and records non-medical patient information as required. Completes other patient documentation and forms as required, • Conducts regular unit inventory and equipment testing to ensure all equipment for which the EMT Basic is responsible is present, clean and in proper working order., • Upon completion of transport, responsible for all assigned duties which will place the ambulance and equipment back in service., • Responsible for full knowledge of the ambulance's basic life support equipment and its proper use at all times., • Documents and reports all needed repairs to the proper maintenance departments (electronic or mechanical) as well as to supervisors and other ambulance personnel as required., • In the absence of other qualified personnel, responsible for the use of basic extrication tools and procedures to gain access to the patient if necessary., • In the absence of other qualified personnel, responsible for controlling the patient's surroundings in such a way as to minimize further danger and control the actions of bystanders., • In both the emergency and non-emergency setting, operates I drives the ambulance in a safe and efficient manner, following company driving guidelines, so the safety or condition of the occupants are not compromised., • Follows all FCC regulations when communicating via electronic communications equipment., • Attends all mandatory meetings as scheduled., • Completes assigned station and station grounds duties., • Orders supplies and equipment from Central Supply to replenish station and ambulance inventories as needed., • Completes assigned ambulance duties (i.e., washing, waxing, interior and exterior cleaning, etc.) as required., • Completes all required company reports and logs and when necessary provides other ambulance and supervisory personnel with the information., • If an approved preceptor, responsible for precepting new employees as directed., • If an approved preceptor, responsible for precepting EMT-Basic students as directed, • Must meet and fulfill the qualifications, requirements, functions and responsibilities of the Emergency Medical Technician -Basic job descriptions., • Performs other duties as assigned. QUALIFICATIONS: • High School Diploma or GED., • National and/or State certification as an Emergency Medical Technician-Basic determined by appropriate state requirements., • Current CPR certification as established by the American Heart Association., • Current and valid state-issued driver's license determined by appropriate state requirements (equivalent of a Louisiana Class "D" driver's license)., • Must be able to read, write and communicate professionally and effectively with employees and managers. Must possess the ability to write simple correspondence or reports. Must possess the ability to effectively present information in one-on-one and small group situations to other employees and/or managers., • Must be knowledgeable of company protocols, operational procedures and safety policies., • Must be able to drive large vehicles in normal and adverse conditions. INTERPERSONAL REQUIREMENTS: • Maintain social, ethical and organizational norms., • Maintain good personal motivation; develop a sense of ownership of job tasks and results., • Must have a sense of urgency for all work performed., • Ability to work under the pressure of meeting strict deadlines., • Excellent interpersonal and communication skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

\n JOB SUMMARY: Receive and dispatch emergency requests for ground and air ambulance responses: direct inbound and outbound telephone calls to appropriate departments, internal and external. \n \n EQUIPMENT: Computers, telephones, printers, pagers, and other related equipment items not specifically listed may be added as new items are introduced. \n \n DUTIES AND RESPONSIBILITIES: Except as explicitly noted, the following functions are considered essential to this position. \n\n \n QUALIFICATIONS: \n\n \n INTERPERSONAL REQUIREMENTS: \n\n \n TRAINING REQUIREMENTS: \n\n \n \n All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. \n

Fusion Medical Staffing-Laboratory is seeking a travel Medical Lab Technician for a travel job in Baton Rouge, Louisiana. Job Description & Requirements • Specialty: Medical Lab Technician, • Discipline: Allied Health Professional, • Start Date: 06/01/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, nights, • Employment Type: Travel Travel Medical Laboratory Technician (MLT) - Generalist Company: Fusion Medical Staffing Location: Facility in Baton Rouge, Louisiana Job Details Fusion Medical Staffing is seeking a skilled Medical Laboratory Technician for a 13-week travel assignment in Baton Rouge, Louisiana. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year of recent experience as a Medical Laboratory Technician, • Valid license when needed in compliance with any state regulationsPreferred Qualifications:, • National certification through ASCP or equivalent such as AMT, AAB, HEW certifications, • Current BLS certification (AHA/ARC), • Perform routine diagnostic laboratory tests in areas such as chemistry, hematology, and immunology, • Prepare and process specimens for analysis, ensuring accurate labeling and handling, • Ensure accuracy and reliability of test results by following quality control protocols, • Follow standard operating procedures and regulatory guidelines (AABB, CAP, FDA, CLIA), • Support the investigation of transfusion reactions by collecting and preparing necessary samples, • Operate and maintain laboratory instruments, performing troubleshooting within scope, • Troubleshoot equipment malfunctions and escalate issues as needed, • Communicate test results clearly and professionally to other healthcare professionals, • Follow laboratory safety guidelines, infection control protocols, and hospital procedures, • Maintain detailed and accurate records of test results, calibrations, and quality control measures, • Assist with inventory management, reagent preparation, and stocking lab supplies, • Perform other duties as assigned within the scope of practice, • Adhere to hospital safety protocols, infection control guidelines, and regulatory standardsRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support Start your rewarding career as a Travel Medical Laboratory Technician (MLT) - Generalist with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer Fusion Medical Staffing - Laboratory Job ID #1920399. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Fusion Medical Staffing-Laboratory With a mission to improve the lives of everyone we touch, Fusion Medical Staffing connects healthcare travelers to opportunities in the locations they've always dreamed of living. Our recruiters act as your co-pilots to support you in your next step – no matter what, where and when. This traveler-first mentality ensures you're in charge of your own destiny, but with the tools you need to succeed. Regardless if you’re a first-time traveler or an established road warrior, you get to choose the best position that not only fits your unique personality but also your personal and professional needs. As a medical traveler, you’ll get to meld your career with personal life experiences, make informed decisions and the freedom to control your career. Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Not to mention you get to explore new cities, take adventures, meet new people, and create memories that last a lifetime. We are not just a place to find your next opportunity, but where you'll love to work. We've won awards for our ethical business practices, lasting community impact, and commitment to being an incredible place to work. Benefits • Benefits start day 1, • Medical benefits, • Dental benefits, • Vision benefits, • Cancelation protection, • Guaranteed Hours, • Employee assistance programs, • Continuing Education, • Referral bonus, • Mileage reimbursement, • License and certification reimbursement, • Weekly pay

HonorVet Technologies is seeking a travel Medical Lab Technician for a travel job in Baton Rouge, Louisiana. Job Description & Requirements • Specialty: Medical Lab Technician, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel Job Num / ID: 3275314 Client: Baton Rouge General Medical Center – MSP Expected Start Date: 05/11/2026 Job Title / Discipline: Medical Lab Technician (MLT) Specialty: Microbiology / Clinical Lab City: Baton Rouge State: LA Shift: Mid Shift (3:00 PM – 11:30 PM) Hours per week: 40 (5x8s) Duration: 13 Weeks Requirements: \t • Minimum 2 years of experience (recent) \t, • Travel experience required \t, • Louisiana State License required (Hard Stop) \t, • ASCP certification preferred \t Founded in 2015, HonorVet Technologies stands as a Service-Disabled Veteran-Owned Small Business (SDVOSB), proudly certified by NaVOBA and the U.S. Department of Veterans Affairs. Our mission goes beyond staffing—we are committed to transforming lives by addressing the critical unemployment challenges faced by veterans. As a Joint Commission-certified clinical staffing agency, we deliver unmatched expertise in placing top-tier healthcare professionals—RNs, LPNs/LVNs, CNAs/CMAs, and NPs—across diverse facilities, including hospitals, clinics, rehabilitation centers, old-age homes, schools, correctional facilities, and more. At HonorVet, we don't just fill roles; we bridge gaps, uplift communities, and honor the ones who served. Benefits • Vision benefits, • License and certification reimbursement, • Continuing Education, • Medical benefits, • Wellness and fitness programs, • Dental benefits, • Guaranteed Hours, • Mileage reimbursement, • Referral bonus, • Bereavement, • Holiday Pay, • Sick pay, • Retention bonus

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order, • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs, • Assists with the start-up of new equipment and maintain current systems and adjusts as needed to ensure the system is operational, • Installation of new equipment, plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance, • Performs work assignments in a safe manner in conjunction with site safety requirements, • Promotes, builds, and maintains good customer relations and assists with contract retention, • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements, • Keeps abreast of changes and new developments in products and technology., • Maintain certifications of customer required security systems., • Reports directly to client site. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Lenel OnGuard, • Genetec Omnicast, • Locking Systems, • Automatic doors openers, • Video Systems (IP Camera's), • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call after hours & weekend emergency calls, • A valid state driver’s license, without restrictions, is required Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order, • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs, • Assists with the start-up of new equipment and maintain current systems and adjusts as needed to ensure the system is operational, • Installation of new equipment, plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance, • Performs work assignments in a safe manner in conjunction with site safety requirements, • Promotes, builds, and maintains good customer relations and assists with contract retention, • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements, • Keeps abreast of changes and new developments in products and technology., • Maintain certifications of customer required security systems., • Reports directly to client site. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Lenel OnGuard, • Genetec Omnicast, • Locking Systems, • Automatic doors openers, • Video Systems (IP Camera's), • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call after hours & weekend emergency calls, • A valid state driver’s license, without restrictions, is required Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order, • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs, • Assists with the start-up of new equipment and maintain current systems and adjusts as needed to ensure the system is operational, • Installation of new equipment, plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance, • Performs work assignments in a safe manner in conjunction with site safety requirements, • Promotes, builds, and maintains good customer relations and assists with contract retention, • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements, • Keeps abreast of changes and new developments in products and technology., • Maintain certifications of customer required security systems., • Reports directly to client site. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Lenel OnGuard, • Genetec Omnicast, • Locking Systems, • Automatic doors openers, • Video Systems (IP Camera's), • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call after hours & weekend emergency calls, • A valid state driver’s license, without restrictions, is required Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order, • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs, • Assists with the start-up of new equipment and maintain current systems and adjusts as needed to ensure the system is operational, • Installation of new equipment, plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance, • Performs work assignments in a safe manner in conjunction with site safety requirements, • Promotes, builds, and maintains good customer relations and assists with contract retention, • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements, • Keeps abreast of changes and new developments in products and technology., • Maintain certifications of customer required security systems., • Reports directly to client site. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Lenel OnGuard, • Genetec Omnicast, • Locking Systems, • Automatic doors openers, • Video Systems (IP Camera's), • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call after hours & weekend emergency calls, • A valid state driver’s license, without restrictions, is required Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order, • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs, • Assists with the start-up of new equipment and maintain current systems and adjusts as needed to ensure the system is operational, • Installation of new equipment, plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance, • Performs work assignments in a safe manner in conjunction with site safety requirements, • Promotes, builds, and maintains good customer relations and assists with contract retention, • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements, • Keeps abreast of changes and new developments in products and technology., • Maintain certifications of customer required security systems., • Reports directly to client site. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Lenel OnGuard, • Genetec Omnicast, • Locking Systems, • Automatic doors openers, • Video Systems (IP Camera's), • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call after hours & weekend emergency calls, • A valid state driver’s license, without restrictions, is required Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order, • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs, • Assists with the start-up of new equipment and maintain current systems and adjusts as needed to ensure the system is operational, • Installation of new equipment, plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance, • Performs work assignments in a safe manner in conjunction with site safety requirements, • Promotes, builds, and maintains good customer relations and assists with contract retention, • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements, • Keeps abreast of changes and new developments in products and technology., • Maintain certifications of customer required security systems., • Reports directly to client site. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Lenel OnGuard, • Genetec Omnicast, • Locking Systems, • Automatic doors openers, • Video Systems (IP Camera's), • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call after hours & weekend emergency calls, • A valid state driver’s license, without restrictions, is required Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order, • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs, • Assists with the start-up of new equipment and maintain current systems and adjusts as needed to ensure the system is operational, • Installation of new equipment, plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance, • Performs work assignments in a safe manner in conjunction with site safety requirements, • Promotes, builds, and maintains good customer relations and assists with contract retention, • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements, • Keeps abreast of changes and new developments in products and technology., • Maintain certifications of customer required security systems., • Reports directly to client site. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Lenel OnGuard, • Genetec Omnicast, • Locking Systems, • Automatic doors openers, • Video Systems (IP Camera's), • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call after hours & weekend emergency calls, • A valid state driver’s license, without restrictions, is required Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Division: 108 - BTR-SVC Position: Overhead Crane Technician Reports To: Branch Manager Employee Type: Full-time Pay Range: $20.00-25.00 an hour Key Responsibilities and Accountabilities: • Troubleshoot, repair and inspect overhead cranes and hoists., • Perform scheduled preventive maintenance activities on equipment., • Support customers by effectively interfacing with customer and office in repairing equipment as needed., • Evaluate and make recommendations regarding required repairs for customers., • Maintain rapport with customers by examining complaints; identifying solutions; suggesting improved methods and techniques; and recommending system improvements., • Service overhead crane systems by performing quality installations; performing OSHA/ANSI equivalent inspections; documenting and completing warranty work; troubleshooting breakdowns; performing preventive maintenance; and responding to repair calls., • Document service and installation actions by completing forms, reports, and inspection checklist., • Builds and maintains customer confidence by maintaining good response time, informing customer of problems, and completing the job in a timely manner., • Maintain professional presentation, timeliness, appearance, and organization in all areas. Required Skills and Knowledge: • Ability to work under pressure and deadlines., • Ability to work independently., • Ability to fabricate and weld structures, • Ability to perform inspections to OSHA/ANSI criteria, • Ability to troubleshoot electrical circuits, • Ability to assemble and repair complex machinery, • Excellent communication skills, • Ability to work at heights., • Willingness to travel, • Safety oriented, • Maintain confidentially, • Quality and results driven, • Good driving record Equipment used to perform job: Hand tools; power tools; lift equipment; material handling equipment; fabrication equipment, electrical meters and equipment, survey equipment; ear plugs; steel-toed shoes; gloves; safety glasses; lanyard; and body harness Company DescriptionAce Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.Ace Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.

Job Description Job Description: The Maintenance Technician position is responsible for maintaining the physical integrity of the community at all times. The successful candidate will have a minimum of 2 years of maintenance related experience including but not limited to; plumbing, electrical, HVAC, and carpentry. Weekend availability and call out time on a rotating basis is required. Job Duties and Responsibilities: • Apartment make ready process for vacant units, • Completion of assigned work orders for repairs and improvements, • Appliance repairs, plumbing, electrical, some HVAC, carpentry, locks and sheetrock maintenance and repair duties, • Property and vacant unit inspections, • Use of basic hand tools and power tools, • Assist with keeping the parts and storage areas organized and secured, • Perform preventative maintenance tasks as needed, • Minimum 1 year of apartment/multi-family experience, • Minimum 2 years of maintenance specific experience, • Customer service oriented, • Strong interpersonal and communication skills+ Vintage Realty Company provides a competitive benefits & compensation package. All candidates must be able to prove eligibility to work in the United States and willing to complete a criminal background & drug screening process as successful completion is necessary before an employment offer is granted. If you are interested in furthering your career in with a progressive successful firm, please submit your cover letter and resume along with contact names and numbers of three professional references. We are an Equal Opportunity Employer.

Job description: We are seeking a Medical Laboratory Technician (MLT) to join our dynamic healthcare team. The MLT will be responsible for performing a wide range of laboratory tests and procedures to support patient diagnosis, treatment, and research activities. This role requires a strong foundation in laboratory techniques, specimen processing, and data management, ensuring accurate and timely results. The ideal candidate will possess excellent technical skills, attention to detail, and a commitment to maintaining high standards of laboratory safety and quality. Job Description: Title: Medical Lab Tech Location: Baton Rouge, LA Contract: 13 weeks Shift: 4x10 hrs Nights Pay Range: $1750 - $1925 weekly gross DOE Key Responsibilities: • Collect, process, and analyze biological specimens such as blood, urine, and tissue samples with precision and adherence to aseptic techniques, • Perform laboratory assays including ELISA, PCR, flow cytometry, immunoassays, and other diagnostic tests, • Manage laboratory data accurately using Laboratory Information Management Systems (LIMS) and ensure proper documentation, • Conduct RNA extraction, DNA isolation, and blood banking procedures following established protocols, • Maintain laboratory equipment, perform routine calibration, and troubleshoot technical issues promptly, • Support clinical trials by preparing specimens and recording detailed results for research purposes, • Ensure compliance with hospital policies, safety regulations, and medical terminology standards, • Assist in specimen collection through venipuncture and phlebotomy while ensuring patient comfort, • Monitor vital signs when necessary during sample collection or patient interaction, • Experience:, • Minimum 3 years required, • Travel experience required, • Previous charge experience: Preferred, • License/Certification: About Pride: As a minority-owned business that delivers exceptional service to its clients and candidates by capitalizing on diverse recruiting, account management, and staffing backgrounds, Pride Health's expert team provides tailored and swift sourcing solutions to help connect healthcare talent with their dream jobs. Our personalized approach within the industry shines through as we continue cultivating honest and open relationships with our network of healthcare professionals, creating an unparalleled environment of trust and loyalty. Equal Employment Opportunity Statement: As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Benefit Statement: Pride Global offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors. #GlobalDeliveryTravel

Company Description BBP, with over 30 years of experience, specializes as a trusted manufacturer’s representative and distributor of industrial instrumentation, valves, and control systems across the Southeast region. Our team proudly supports critical industries such as chemical processing, oil and gas, food and beverage, power generation, water and wastewater, pulp and paper, and pharmaceutical manufacturing. At BBP, we build trust through exceptional service and extensive industrial expertise, offering personalized solutions that deliver tangible results. From single facilities to large-scale capital projects, we collaborate closely with operations, engineering, and procurement teams to meet diverse operational needs. Role Description BBP is seeking a full-time Field Service Technician in the Baton Rouge, LA area. The Field Service Technician will be responsible for installing, maintaining, and troubleshooting industrial instrumentation, control systems, and related equipment for a variety of industries. Daily tasks include performing preventative maintenance, diagnosing technical issues, repairing equipment, and providing technical support to clients on-site. The candidate will also ensure compliance with safety protocols and maintain thorough documentation of service activities. Qualifications • Proficient in troubleshooting and maintaining industrial instrumentation and control systems., • Knowledge of installation and repair of valves, analytical products, and related equipment., • Experience with diagnosing technical issues and implementing effective solutions within industrial environments., • Strong communication skills for effectively supporting operations, engineering, and procurement teams., • Ability to work in the Baton Rouge, LA area and travel to various customer facilities., • Familiarity with safety regulations and the ability to adhere to safety protocols., • Associate degree or technical certification in a related field preferred; relevant experience considered., • Experience in industries such as chemical processing, oil and gas, food and beverage, or pharmaceutical manufacturing is an advantage.

Job DescriptionCompany Description Christian Brothers Automotive Benefits: • Closed Every Weekend To Spend Time With Family & Friends, • Paid Vacation & Paid Holidays, • Healthcare Benefits Available, • Employee Point Store Access - Redeem Your Training Points For Awesome Swag & Rewards, • Continuous Training Available Through The CBA Flywheel Learning System, • Employer-paid Financial Wellness Program and App, SmartDollar & EveryDollar, • On-Going Training & Career Advancement, • Future Franchise Leadership Academy (FFLA) - Path to Shop Ownership AvailableJob Description Job Title: Automotive Service Manager Location: 14455 Airline Hwy Baton Rouge, La 70817 Job Overview: As a Service Manager with Christian Brothers Automotive, you are the person that our guests look to when they need help with their vehicle. You are the person that our guests see every time they make an investment in their vehicle. Because of these reasons, you play a large role in building relationships with our guests. Our Service Managers have the responsibility of taking our guests through the entire repair process, keeping them informed on the status of their vehicle, and ensuring their satisfaction before they leave our facility. The Service Manager has responsibility and authority for all aspects of the daily operation of the business. Responsibilities include, but are not limited to, sales activities, staff management, quality of work, guest satisfaction, revenue, profit margin, and other documented goals as assigned by the Owner. All office and shop personnel report directly to the Service Manager. Responsibilities include, but are not limited to: • Manage office and shop personnel and daily operations, • Follow and enforce all company policies and procedures as outlined in the current Employee Handbook, • Take necessary corrective and/or disciplinary action for employee non-compliance, • Ensure quality of work, attitude and performance meets or exceeds guest satisfaction goals, • Direct the smooth, orderly and organized operation of the store, • Maintain a personal positive attitude and positive communications at all times, • Develop estimates and work orders., • Direct Service Writer's development of our guest estimates and work orders and assign work orders to the technicians, • Ensure selection of quality parts, • Ensure target margins are achieved, • Open and close stores on a daily basis, • Perform daily accounting closing and balancing procedures, • Perform daily, weekly, and monthly reconciliations, audits and report analysis. Report results to Franchise Owners and or Operators, • Ensure all equipment is fully operational and in good working order., • Ensure technicians have the resources needed to do their job, • Serve as the primary communications interface to the customers, before, during and after service, • Greet every guest that enters our facility with enthusiasm and a smile, showing hospitality and the highest level of respect, • Present the best solution to properly repair our customer’s vehicle in a way that is easy for them to understand, • Possess the ability to consistently and effectively sell our services without jeopardizing honesty and integrity, • Act in a professional manner suitable as to represent a quality organization with which you are employed, always and in every instance projecting the characteristics of honesty and integrity, • Other duties may be assignedQualifications Qualifications: • 5 years work experience in Automotive Customer Service & Service Sales, • Supervisory or Management experience in the Automotive Industry, • Proficiency in Windows based computer software and automotive store applications, • Experience in TekMetric software application preferred, but not required, • Graduation from an industry recognized service training program preferred by not required, • Current driver’s licenses, • Being on your feet for the majority of the workday (standing, walking, etc.), • Occasionally lifting and carrying objects over 50 lbs., • Driving manual transmission vehicles, • Keeping a brisk work pace in a high-volume environment, • Using a keyboard and mouse several times daily, • Using a standard handset phone several times daily Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Job Description Summary Throughout our 20-year history, we have worked hard to make CIS Industries an enjoyable and rewarding place to work. In addition to competitive salaries, comprehensive benefits, and tangible career growth, our people enjoy a stability and loyalty envied in the industry. With average employee tenure of 10+ years, our culture encourages people to maximize their skills and potential. Our company culture is professional yet relaxed; we understand that going to work every day should be a gift, not a burden. Join our growing team today! POSITION PURPOSE The Controls Service Technician role primarily involves starting up, trouble shooting and repairing complex controls on HVAC equipment consisting of primarily, but not limited to, Variable Refrigerant Flow (VRF) systems, dedicated outside air units, hot water boilers, computer room units, water source heat pumps, VAVs, packaged rooftops and split DX units. A service technician is also expected to meet with end-users monthly as part of service contracts to maintain their system and assist with their needs. This position in based out of Baton Rouge and requires out of state travel, up to 5% of the time. Controls Service Technician Job Skills: • Familiarity with instruments and the ability to acquire information such as temperature, humidity, static pressure, voltage, amperage, air flow, etc., • Understanding of control systems including wiring, thermostats, and end devices., • Perform troubleshooting steps of both IP and Serial Communication Protocols, • Effectively communicates verbally and in writing with customers and co-workers., • Able to read wiring schematics and diagrams for all equipment., • Effectively present training material to owners and contractors in a classroom environment., • Documents service and installation activities by completing work orders for each job, maintenance checklist and daily time sheets., • Maintains rapport with customers by addressing complaints and identifying solutions., • Maintains a safe and clean working environment by complying with established policies, procedures, rules and regulations., • Above average computer skills. Ability to learn and use proprietary software needed to start-up, configure or trouble shoot HVAC equipment., • Independently manages daily business needs by identifying parts to order for repairs and determines the urgency of the requirement., • Keeps current on products concerning installation, operation, maintenance, service, and repair of HVAC systems and components., • Flexibility to work outside normal work hours, as required. Qualifications: • Associate degree or equivalent from a Technical / Trade School with a certificate in Heating, Ventilation, and Air Conditioning and two (2) years related experience; or five (5) years related experience; or equivalent combination of education and experience., • Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e., Smartphone, iPad)., • Routine sitting, lifting, bending, and kneeling, • Ability to lift 50 lbs. from floor to countertop and countertop to floor Benefits include paid vacation, 401K match program up to 4% of gross pay, Safe Harbor company contribution 3% of your annual salary, a company supplemented health insurance program, plus employer paid life insurance, short- and long-term disability. Dental and Vision options are available. Pay: Pay commensurate with job experience.

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. The Service Writer ensures quality customer service and support in person, via phone, or e-mail. This often includes quoting service work, selling additional services, updating the customer in a timely manner, contacting the customer when quotes and/or work is completed with final pricing. ESSENTIAL JOB FUNCTIONS: • Support the service team by maintaining complete job files, including correspondence relative to approvals, etc.,, which tie back to more prompt payment(s)., • Technician time keeping and review on a daily basis; submittal to payroll bi-weekly., • Creation of repair orders to include customer concerns, contact info, unit info, etc., • Prepare repair orders review for service manager; finalize shop invoicing; mailing and filing of same., • Maintain job files with all pertinent correspondence to each job., • Daily yard checks and logs and update the customer accordingly, • Update daily key performance indicators (electronic and printed) to be posted in the shop., • Interact with service management team, and technicians., • Ensure fabrication materials are readily available in stock, • Allocate and pull parts for repairs orders, • Research and order parts to job spec, • High School Diploma required; Associates or Bachelor's degree a plus, • Prefer at least 5+ years’ experience in a similar role, • Self-starter with excellent customer service skills, • Strong organizational and time management skills, • Detail oriented, • Medical, Dental and Vision Insurance, • 401(k) with generous employer match, • Paid time off, • 10 Paid holidays, • Flexible spending account, • Optional Health savings account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement

Job Description Access Sciences Corporation is an employee-owned, nationwide professional services firm specializing in information management and technology consulting. Position Title: Records Technician/Document Imaging Operator Position Overview: Looking for an exhilarating opportunity to showcase your organizational skills and attention to detail? As an Onsite Records Technician/Document Imaging Operator in Baton Rouge, LA, you will be at the heart of our operations, ensuring all client documents are accurately processed and stored. You can embark on a fulfilling journey in the world of information management. Join our dynamic team at Access Sciences and be part of a company that values smart solutions, customer-centricity, excellence, and integrity. Qualifications: Education: High School Diploma or equivalent Experience: • Minimum of 2 years of work experience, • Advanced skills in MS Excel, MS Word, and MS PowerPoint; and willing to learn new technologies, • Prior scanning experience is a plus, • Must be able to provide continuous improvement by analyzing problems, communicating findings, making recommendations, and implementing the solution, • Must have good oral and written communication skills, • Must be dependable, • Must be able to follow instructions, • Must be detail-oriented, • Must be able to work as part of a team in a service-oriented environment As a Records Technician/Document Imaging Operator at Access Sciences, you will be diving into a world of document management like never before. From preparing documents for scanning to conducting quality control checks and maintaining scanning equipment, you'll be instrumental in ensuring the smooth transition of physical records to electronic formats. Your role will involve indexing data, converting documents for import, and assisting with offsite storage preparations. Disclaimers: This description is intended to highlight the typical functions of the job; it is not an exhaustive list of all possible tasks or responsibilities that may be assigned or required. Other tasks may be assigned that differ from those outlined in the job description. Job Posted by ApplicantPro

Job DescriptionDescription: $$MONEY$$ - BENEFITS - GROWTH - FAMILY CULTURE Now that we got your attention, why work for Integrity? Our people fuel the engine. We're relentlessly passionate about their success. To grow and build a company you are proud to call HOME! Integrity Fleet Services is a new and upcoming company built on a strong belief of help others, do what’s right and as the name implies integrity. By these key values we have developed strong long-lasting relationships in the fleet service industry not only with our customers but with each and every team member. Integrity Fleet Services is growing fast and looking for dependable and experienced Road Service Diesel and Trailer Technicians. Responsibilities • Perform a wide range of fleet repairs and preventative maintenances, including oil changes, filter replacements, and lubrication., • Diagnose and repair systems such as ABS, braking, hydraulic, light engine, pneumatic, and other related systems., • Utilize diagnostic software to assist with troubleshooting and efficient repair processes., • Accurately document work time, service reports, and equipment status to ensure precise billing and record-keeping., • Operate a service truck to reach various customer locations, ensuring a professional presence and communication with customers., • Responsible for decision-making surrounding vehicle diagnostics and repairs., • Conduct self in a professional manner. From the necessary (various health and wellness benefit options) to the nice-to-haves (we're talking EPIC snack bar friends), no matter what you are looking for, we have something just for you! · Health insurance · Retirement plan · Dental insurance · Vision insurance · Paid Holidays · Paid Vacation · annnd MUCH MUCH More!!! Our people: We have outdoor people, indoor people, mountain bikers, road bikers, runners, walkers (not the zombie kind), video game heroes, movie buffs, musicians, dancers, and every other variety of people. We have family people, single people, happy people. You will find a friend here and like we said, bring your friends too. Our advice: Don't ignore this opportunity. Of course, you may be happy now. But shouldn't you always be happier? Come in- Check us out. Worst case scenario, you will find out all the things we said are true (which you will). If you are a perfect fit, and join our team, FANTASTIC! If not, you made some new friends. Don't be afraid of change! One more thing: Share this! Don't be scared of friends or co-workers stealing this awesome job. If you are amazing and awesome, we will find a place for you too! Like we said, we are growing our team and have multiple positions open! Requirements: Qualifications • 2 years of experience performing repairs on trucks and trailers, including mechanical, electrical, brake, and suspension systems, with hands-on use of diagnostic software and tools for troubleshooting., • Strong mechanical skills with proficiency in the repair and service of truck and trailer systems and components; experience with advanced diagnostics is preferred but not required., • Must possess a valid driver’s license and a clean driving record., • Strong verbal and documentation skills, with the ability to work well with others and maintain professional relationships at all levels., • Must own basic tools required for the job., • Vocational or technical certifications are highly valued; ASE certification is advantageous., • Ability to work flexible schedules., • Must be able to lift, push, pull, and move up to 70 pounds and be capable of climbing, kneeling, twisting, and bending in a variety of work environments., • Welding experience a plus., • Full Time, • Approximately 40–45 hours per week, with additional hours as needed based on workload and customer demand. WE ARE A 24/7 ROAD SERVICE – FLEET MAINTENANCE COMPANY. SCHEDULE MUST BE FLEXIBLE. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.

Job Description Hancock Claims Consultants specialize in Ladder Assist and Property Inspection Services, collaborating directly with numerous insurance agencies for efficient claims management. At Hancock, we are at the forefront of claims resolution services, offering nationwide coverage, swift and comprehensive claims inspections, and unparalleled quality and precision. Our established process ensures top-tier claims support, ranging from rapid catastrophe response to direct inspections. As a Roof Field Technician, you'll be part of our dynamic network of independent contractors, conducting assessments on steep and high roofs, evaluating exterior and interior damage, and performing underwriting property inspections. Utilizing cutting-edge technology, our inspectors help assess property damage and prevent further harm until permanent repairs are complete. Please note: This is an Independent Contractor position. Successful Technicians possess: • Ability to safely navigate and inspect any type of roof, specifically steep and high roofs, • Technical ability to complete inspections in varied weather conditions, • Professionalism, • Detail Oriented, • Strong customer service skills, • Empathy when dealing with insureds, • An entrepreneurial spirit, • Must have a reliable Truck, Van or SUV with the ability to transport and carry at least a 32’ ladder, • Must have a Lidar equip device or the ability to obtain one (ex. iPad Pro/iPhone 12 pro or greater), • Demonstrated knowledge of MS Office applications including Outlook and Teams, • HAAG Certification is a plus Hja8xBGhEU

Job Description Baton Rouge, LA: Flexicrew Technical Services (FTS) is seeking a detail-oriented Drafting & CAD Technician to support engineering and manufacturing operations. This role is responsible for creating accurate 3D models and technical drawings for mechanical seals and related components using CAD software. The ideal candidate will have strong attention to detail, solid mechanical understanding, and the ability to collaborate across multiple departments in a fast-paced manufacturing environment while maintaining accuracy, organization, and production support needs. Responsibilities • Create 3D models and detailed drawings using Autodesk Inventor or similar CAD software, • Ensure drawings are accurate, properly dimensioned, and meet tolerancing requirements, • Select correct finish stock numbers and manufacturing data for production, • Provide technical support to departments including production, manufacturing, sales, customer service, and materials control, • Maintain and organize technical files, drawings, and engineering documentation, • Assist with calculations and technical information for customers and internal departments, • Meet project deadlines while maintaining accuracy and quality standards, • Experience with solid-based CAD software such as Autodesk Inventor or SolidWorks, • Understanding of manufacturing processes and production environments, • Knowledge of quality assurance procedures and techniques, • Strong attention to detail and organizational skills, • Ability to manage priorities and meet deadlines, • Professional communication and teamwork skills, • Previous experience in a manufacturing or engineering environment preferred

Job DescriptionBenefits: • Competitive Wages, • Tools Provided, • Uniforms Provided, • Company Vehicle, • Paid Training, • Flexibility, • Career Advancement Opportunities, • Growing Industry, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Job Title: Access Control Technician Reports To: General Manager or Franchise Owner Key Areas of Responsibility: The Access Control Technician position is an integral part of the business and key to the growth of the company. All Access Control Technicians must have the ability to work well in a high-paced working environment. The individual must work well as part of the team and independently from the FlyLock owner. Requirements/Responsibilities • Minimum of 2 years experience in technical hands-on field experience in security solutions, access control, door hardware, and other skilled trades., • Inspects, installs, and services all basic and complex commercial and residential access and video systems., • Performs advanced, complex troubleshooting and repair functions for commercial and residential access and video systems such as programming; cleaning detectors; testing controls and peripheral devices; mounting, replacing, and testing equipment according to specifications; running cable, etc., • Instructs customers in access and video systems operation by recommending ways to use additional features and capabilities of system installations., • Respond to customer questions and requests., • Recommend corrective services to adjust customer complaints., • Diffuses difficult and complex customer issues., • Builds and maintains working relations with the sales staff., • Defines the scope of add-ons and change orders, seeks customer approval, and writes up paperwork., • Performs site visits with sales consultants for existing or potential clients., • Takes responsibility for the project from first walk-through to final sign-off and hand-offs to service., • Maintains accurate records of all inspections/service calls and troubleshooting as required including documentation and updating paperwork., • Other duties as required by management.Nice to Have:, • Experience with systems mentioned below is useful but not all required., • Access Control - Avigilon ACM, OpenPath / Avigilon Alta, Lenel, Brivo, PDK, ButterflyMX and Latch., • CCTV - Avigilon, • Lock Hardware HES, Rutherford, Schlage, Allegion Brands, Assa Brands, SDC Controls, Lock Retrofit Kits, Magnetic Locks, Electrified Trim Sets, Electrified Crash Bars, Electrified Strikes, Electrified Handsets, Schlage NDEPhysical Requirements:, • Must be able to fluently understand, speak, and write English., • Ability to push, pull, and lift at least 50 lbs., • Ability to kneel, crouch and stoop., • Ability to reach above and below the shoulders., • Ability to use hands and fingers to grasp, twist, and pull., • Ability to climb a ladder and work above ground., • Withstand external weather conditions year-round.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for a Fire Alarm/Intrusion/Access Control Service Technician for work at various retail locations across the United States. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of a personal vehicle when travel is required, • Company vehicle provided after orientation Requirements:, • Louisiana Life Safety and Property Protection (LSPP) license issued by the Louisiana State Fire Marshal's Office for Fire Alarm (Life Safety), • Field installation experience in security environments: Fire Alarm /Intrusion / Access Control, • NICET certification (Preferred), • Current/valid state required Physical Security license and/or Life Safety license in the applicable technology., • Knowledgeable about NFPA standards, including NFPA 70 and 72, • Work schedule mainly during the day 8 am to 5 pm, with some night shifts., • Available and willing to work at heights of 20’-60’ on lifts., • Experience reading blueprints and site maps., • Experience with multiple Intrusion/Access system manufacturers is a plus., • Assist with pre-installation opportunities by designing and planning technical solutions., • Perform new installs and provide technical escalation support both on-site at customer locations as well as remotely via the phone and specialized tools., • Excellent customer relationship and communication skills; verbal and written., • Has basic PPE, and reliable transportation during the training period prior to issuing a company vehicle, • Computer/laptop/smartphone proficiency., • Basic understanding of Microsoft Office Products (Word, Excel, PowerPoint) is a plus., • Highly proficient with the use of email, spreadsheets, and the ability to learn internal systems., • Valid driver’s license with a clean driving record; no DUI or DWI in the last three years. Responsibilities:, • Install, troubleshoot, and repair cabling systems and equipment in IP Video, Access Control / Intrusion Alarm / LAN/WAN infrastructure, and wireless LAN., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit bending work., • Complete all wiring, connections/terminations, and equipment installations ensuring that Access Control and Intrusion systems are complete with total customer satisfaction and contractual requirements., • Install, repair, or upgrade fire alarm systems and program control panels for fire alarm systems with the guidance of building plans and electrical layouts., • Mount sensors at appropriate locations, performing all necessary tasks, such as drilling holes for cabling and accessing locations such as crawlspaces or attics., • Complete all wiring, connections, and equipment installations ensuring that fire alarm systems are in compliance with electrical and fire codes., • Tests to ensure all newly installed fire alarm systems and component devices are operational., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA., • Perform any other duties not specifically stated herein, but which your supervisor may assign., • Ensure all work complies with current codes and regulations., • Assist and collaborate with the Installation Team Lead or Project Manager regarding on-site work schedules and timely delivery of equipment., • Conduct tests to ensure all newly installed systems and component devices are operational., • Troubleshoot new system installations to ensure the proper functioning and to ensure the system meets local, county, state, or federal codes and legal and/or insurance requirements.Travel and Training, • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years), • Willingness to travel moderately (up to 20–30%) and work flexible shifts, including overnights

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. The Confined Space Entry Monitor is responsible for confined space attendant duties, fire prevention, and fire protection at the assigned work site. Will train as a foundational Technician if desired. ESSENTIAL JOB FUNCTIONS: • MUST BE ABLE TO WEAR A RESPIRATOR., • Focus on primary duty to monitor and protect the Entrant., • Ability to monitor two spaces that are accessible from the same platform between the two., • Perform the duties of the external fire watch for Hotwork being performed., • Remain outside the permit space during entry operations unless relieved by another authorized Attendant, • Know existing and potential hazards, including information on the mode of exposure, signs or symptoms, consequences, and physiological effects (review SDS or waste profile as applicable), • Maintain communication with the Entrant (s) by verbal communication, clearly communicated signals or radio, • Post the permit at or near the point of entry and keep an accurate account of those workers entering or exiting the permit space, • Ensure ventilation is in use and remains functional throughout the entry, • Verify that the entrant has completed and documented pre-entry meter readings, • Verify Entrant is wearing all required PPE identified on the permit, including a harness connected to a Rescue Self Retracting Lifeline (RSRL) or mechanical rescue device, • Perform non-entry rescue using RSRL or mechanical rescue device, • Summon rescue and other services during an emergency, • Order evacuation of the permit space under certain circumstances, • Prevent unauthorized people from entering permit spaces, • Inform authorized entrants and the entry supervisor if any unauthorized person enters the permit space despite the attendants’ efforts to prevent entry., • Shop helper and other safety duties as needed, • Attendant must be competent with operation of RSRL and mechanical rescue device., • Working knowledge of safety procedures, • Ability to complete multiple tasks with a strong sense of urgency to meet the customer needs., • Work well within a team environment and take instructions from management and co-workers., • Excellent written and verbal communication skills., • Safety Oriented with the ability to identify and eliminate hazards and unsafe work practices, • High School Diploma or GED required, • Must be at least 18 years of age., • Experience NOT required but Experience is a PLUS *, • The performance of this position will require exposure to shop areas, which all require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shoes, and other mandatory safety equipment., • Ambient temperatures, typical shop lighting, and mechanical equipment are generally present throughout the shop., • Medical, Dental and Vision Insurance, • 401(k) with generous employer match, • Paid time off, • 10 Paid holidays, • Flexible spending account, • Optional Health savings account & Flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement

Job Description Looking for that HVAC technician that is ready to support from the Inside. Some travel required. Objective The mission of the Gemaire technical support group is to provide expertise, knowledge and solutions to our contractor base through personal contact by dedicated Technical Support Representatives. Employees in this role primarily provide product technical support to Gemaire customers in alignment with company objectives. This routinely includes providing customers with information on the proper application, installation, operation, service procedures and handling special warranty situations for the HVAC equipment lines distributed by Gemaire. They communicate clearly with a positive attitude to encourage best practices and highest customer satisfaction. Duties and Responsibilities • Provide remote technical support regarding product installation and service issues through a queue-based Salesforce CRM system. Most of this support is conducted via telephone, chat and email. • Provide on-site technical support regarding product installation and service issues through personal direct interaction. • Encourage development of Gemaire customers by explaining the correct product installation methods, product service and diagnostic methods, and overall best practices. • May be required to teach technical training classes produced by Gemaire and the various equipment manufacturers as directed by the class syllabus and manufacturer guidelines. • Provide support to the Gemaire sales group objectives by working with local and regional sales representatives. This can include activities such as joint calls to key customers and speaking or presenting on various topics at trade shows or open house events. • Act as a first point of contact or liaison between Gemaire customers and HVAC equipment factory representatives, especially when dealing with special warranty issues, manufacturer program support or end user (consumer) support cases. • Assist in equipment manufacturer product quality escape resolution and program administration for the HVAC equipment lines distributed by Gemaire. Required Qualifications • HVAC technical service skills typical of minimum 5 years direct industry experience, • Excellent verbal and written communication skills, • Computer literate, proficient with Microsoft office suite., • Some overnight travel required, • Valid motor vehicle driver license and reliable transportation (must have clean driving record for at least the last 3 years, including no suspensions, restricted licenses, or DUI's and no more than 1 moving violation within any 1-year period). Company DescriptionGemaire is a subsidiary of Watsco, Inc., (NYSE: WSO) the world’s largest independent distributor of heating, ventilation, and air conditioning (HVAC) equipment, parts, and supplies. Gemaire, with corporate headquarters in Deerfield Beach, Florida. Gemaire has more than 100 locations in eleven states including Florida, Georgia, Texas, North Carolina, South Carolina, Virginia, Alabama, Louisiana, California, Nevada, and Arizona. For more than 50 years we have been known as a respected, strong, and reliable force within the HVAC industry. Our distribution rights with trusted manufacturer brands such as Rheem, American Standard, Frigidaire, Mitsubishi, and others allow us to provide only the highest quality, most eco-friendly equipment, parts and supplies to our valued network of contractors’ coast to coast. As a member of our sales and service team you will enjoy competitive pay and benefits including medical, dental, vision and life insurance, paid time off, tuition reimbursement and an opportunity to builGemaire is a subsidiary of Watsco, Inc., (NYSE: WSO) the world’s largest independent distributor of heating, ventilation, and air conditioning (HVAC) equipment, parts, and supplies. Gemaire, with corporate headquarters in Deerfield Beach, Florida. Gemaire has more than 100 locations in eleven states including Florida, Georgia, Texas, North Carolina, South Carolina, Virginia, Alabama, Louisiana, California, Nevada, and Arizona. \r\n\r\nFor more than 50 years we have been known as a respected, strong, and reliable force within the HVAC industry. Our distribution rights with trusted manufacturer brands such as Rheem, American Standard, Frigidaire, Mitsubishi, and others allow us to provide only the highest quality, most eco-friendly equipment, parts and supplies to our valued network of contractors’ coast to coast. \r\n\r\nAs a member of our sales and service team you will enjoy competitive pay and benefits including medical, dental, vision and life insurance, paid time off, tuition reimbursement and an opportunity to buil

Job Description Job Description S1 Technology is seeking a System Administrator — an expert-level technician and hands‐on problem solver who thrives in complex environments. This position requires a deep understanding and expertise in modern technology landscapes. In This Role, You Will • Lead end to end onboarding for new clients: assess their current environment, document systems, and implement S1’s standard stack so they start strong from day one., • Plan and execute technical onboarding tasks, including server and network configuration, user setup, security hardening, and cloud service activation for new environments., • Own project timelines for onboarding and other technical initiatives, coordinating with sales, account management, and vendors to keep work on track and clients informed., • Translate business needs into project plans and technical tasks, then follow through on configuration, testing, and documentation so handoff to the MSP support team is smooth., • Run project status check-ins with internal stakeholders, capturing risks and issues early and adjusting scope or timelines when needed., • Create and maintain clear documentation for every project and onboarding, including network diagrams, asset lists, and standard operating procedures., • Identify opportunities during onboarding and projects to improve clients’ security, reliability, and user experience, and recommend upgrades or changes., • Associate's or bachelor’s degree in Computer Science, Information Technology, or a related field., • Extensive background experience with system administration, network administration, or similar roles, • Expert-level knowledge of:, • Microsoft 365 Administration including:, • Entra ID, • Exchange Online, • SharePoint, • Hybrid Identity Architecture, • Strong understanding of networking principles and experience managing network infrastructure – switches, routers, firewalls, and VLANs., • Experience with cloud services (e.g., AWS, Azure, Google Cloud) and managing cloud-based infrastructure and services., • Knowledge of virtualization technologies (e.g., VMware, Hyper-V) and containerization (e.g., Docker, Kubernetes)., • Familiarity with backup and disaster recovery solutions and best practices., • Experience with scripting and automation tools (e.g., PowerShell, Bash)., • Excellent problem-solving and analytical skills., • Strong communication and interpersonal skills, with the ability to explain technical concepts to non-technical users., • Ability to work independently and as part of a team, managing time effectively across multiple tasks and deadlines., • You’re the person people come to when they need a complicated technical problem explained in plain language. We're laser-focused on customer experience and a good sys admin takes a consulting-by-doing approach to help end-users use technology to make their jobs easier and their lives better! We pride ourselves on fostering an incredible workplace at S1 Technology. We believe that we'd be nothing without our fantastic team, which is why we make dang sure to focus a lot of time and energy into building the culture at S1! We're always hiring and we're always looking for the best! Company DescriptionWe're a strategic Managed IT Services & Cybersecurity provider that holds ourselves to a very high standard in customer experience, technical expertise, quality of work, and work culture.We're a strategic Managed IT Services & Cybersecurity provider that holds ourselves to a very high standard in customer experience, technical expertise, quality of work, and work culture.

Job Description Porsche Technician – Harris Porsche (Baton Rouge Area) Join a team built on precision, performance, and innovation. At Harris Porsche, we’re looking for an experienced and motivated Porsche Technician to join our high-performing service team. If you take pride in craftsmanship and want to work on some of the most advanced vehicles in the world, this is your opportunity. What You’ll Do • Perform diagnostics, maintenance, and repairs on Porsche vehicles, • Utilize advanced diagnostic tools and factory procedures, • Leverage new AI-driven diagnostic software to reduce diagnostic time and improve accuracy, • Complete multi-point inspections with accuracy and efficiency, • Collaborate with service advisors and foreman to deliver top-tier client experience, • Maintain Porsche standards for quality and safety What We’re Looking For • REQUIRED: Prior experience as an automotive technician, • European or luxury brand experience strongly preferred, • Porsche certification (preferred but not required—we can help you get there), • Strong diagnostic and electrical troubleshooting skills, • High attention to detail and pride in your work, • Team-oriented mindset with a strong work ethic, • Must be over 21 years of age to apply What We Offer • Competitive pay (flat rate + performance incentives), • Paid training & Porsche certification opportunities, • State-of-the-art facility and equipment, • Cutting-edge technology, including AI-assisted diagnostics, • Supportive leadership and strong shop culture, • Health benefits, PTO, and career growth opportunities Why Harris Porsche? We’re not just a dealership—we’re a performance-driven team that values quality work, integrity, and long-term relationships with both clients and employees. You’ll work alongside passionate professionals who care about doing things the right way. Apply Today If you’re ready to take your career to the next level with Porsche, we’d love to hear from you. Harris Porsche – Baton Rouge, LA Company DescriptionWhat We Offer: • Competitive Compensation, • 401K With Company Match, • Vision / Dental / Health Insurance, • Bonus Incentives, • Paid Training, • Great CultureWhat We Offer:\r\n• Competitive Compensation\r\n• 401K With Company Match\r\n• Vision / Dental / Health Insurance\r\n• Bonus Incentives\r\n• Paid Training\r\n• Great Culture

Job Title: Information Technology Professional (IT/CTN/IS) Category / Component: Enlisted • Both Overview Information Systems Technicians, Cryptologic Technician Networks, and Intelligence Specialists keep the Fleet connected, informed, and secure by operating and defending networks, conducting cyber operations, and producing intelligence for decision makers across the Navy. Key Responsibilities As an Information Systems Technician, design, operate, secure, and restore networks, servers, and communication systems that support naval operations; as a Cryptologic Technician Networks specialist, conduct offensive and defensive cyber operations, investigate and track adversary activity, and help protect Navy networks and critical systems; as an Intelligence Specialist, collect and analyze information on adversaries, environments, and weather and create intelligence products and briefings for commanders. What to Expect High tempo, mission critical work supporting around the clock operations and watch floors; mix of help desk and user support, network and systems administration, incident response, and planned maintenance; continuous learning in cyber tools, network defense, signals analysis, and intelligence production; strict requirements for handling classified information and complying with security and information assurance standards; shift work, duty rotations, and deployments afloat and ashore. Work Environment Worldwide assignments ashore at information warfare and intelligence commands and afloat on ships, aircraft, or submarines; work in secure facilities, server rooms, operations centers, and shipboard communications spaces; close teamwork within information warfare and intelligence teams and with supported operational units. Pathways, Training & Advancement Recruit Training followed by Class A School in an information warfare specialty, such as IT or CTN at information warfare training sites and IS at intelligence training commands; advanced C schools and follow on training in areas such as cyber operations, network defense, digital forensics, signals analysis, targeting, imagery, language, and mission systems; progressive advancement based on qualifications, performance, and warfare pins such as Information Warfare and platform specific warfare designations. Direct enlistment into IT, CTN, or IS pipelines from civilian life based on aptitude, security clearance eligibility, and Navy needs; in service conversion opportunities for qualified Sailors who meet screening criteria and community requirements; Reserve accession pathways for prior service or qualified civilian professionals when manning needs allow. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: United States citizenship or equivalent status as allowed by law and policy, with most billets requiring citizenship; high school diploma or equivalent; at least 17 years of age; strong interest and aptitude in computers, networks, cyber operations, and analytical work; eligibility for a security clearance at the Secret or Top Secret level depending on the billet. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title: Bomb Technician (EOD) Category / Component: Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Supplemental Health Care is seeking a travel Interventional Radiology Technologist for a travel job in Baton Rouge, Louisiana. • Specialty: Interventional Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Job Description: Supplemental Health Care is hiring Interventional Radiology Technologists for contract assignments at partnering hospitals in Baton Rouge, Louisiana. Whether you’re looking to travel or stay local, we’re committed to helping Radiology Techs find the right fit with top hospitals across the country. With more than 40 years of experience in healthcare staffing, Supplemental Health Care offers reliable support, competitive pay, and great benefits every step of the way. Qualifications: • Graduate of an X-ray technician program accredited by the Joint Review Committee on Education in Radiologic Technology (JRCERT) or another accrediting agency approved by The American Registry of Radiologic Technologists (ARRT), • Certification from the American Registry of Radiologic Technologists (ARRT), • ACLS Certification, • American Heart Association BLS, • 2 - 3 years of prior IR experience Interventional Radiology Tech Contract Details: • $2,240 - $2,406 per week*, • 13-week contract with possibility to extend, • 40 per week, • Hospital Setting, • *Estimated weekly payment may include both taxable wages and tax-free reimbursements for meals, housing, and incidentals. Please speak with a recruiter for details. Apply today to get started with this Interventional Radiology Technologist contract opportunity, or talk to our team about the full range of Radiology Tech opportunities available. What We Offer: • Full medical, dental, vision, life, and even pet insurance!, • Round the clock support. No matter where you are or what time it is, Supplemental Health Care is standing by., • SHC's Share the Care referral program is the most dynamic, profitable referral program in the industry., • 401(k) Retirement Savings Program with a wide range of investment options., • Discounted and free online access to CEU courses through Supplemental University. Supplemental Health Care is an Equal Opportunity Employer. All candidates, including veterans and those with disabilities, are encouraged to apply. SHC will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of applicable local, state, or federal law. To learn more, visit Supplemental Health Care Job ID #1487544. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Interventional Radiology Technologist At Supplemental Health Care, a simple belief in the power of caring guides a unique commitment to world-class service in healthcare staffing. For 40 years, we’ve supported talented professionals pursuing their life calling in hospitals, schools, home health, corrections, behavioral health, and other settings. At SHC, we inspire vital connections and enrich lives and inspire better outcomes. As recipients of the Best in Staffing Awards for both Client and Talent, Supplemental Health Care is proud to be among only 2% of staffing companies singled out for the distinction based on the real feedback of our employees and the clients we serve. SHC has also earned The Joint Commission’s Gold Seal of Approval and is named among the Largest Health Care Staffing companies in the United States by Staffing Industry Analysts. We are also thrilled to recognize our very own SLP, Dr. Kelly Byrd as the American Staffing Association 2024 ___ and Health Care Sector All-Star. We’re honored to connect Dr. Byrd to employment, share her incredible story, and support her family literacy nonprofit. For everyone that we serve, SHC is the place where caring hearts thrive. • Referral bonus, • Benefits start day 1, • 401k retirement plan, • Continuing Education, • Discount program, • Health savings account

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary TRAVEL REQUIRED within US-2 to 3 weeks on-1 week off (home) Must be at least 21 years old Must have a valid Drivers License Must be able to pass a drug test, background check and Motor Vehicle Check. Position Objective: This is an entry level position that reports to a Field Supervisor. The Field Installer is responsible for timely installation of tents as well as safe use of tents and related equipment. Must be able to lift heavy equipment as the work is very physical and demanding, requiring both strength and stamina. The Field Installer is responsible for installation, takedown, repairs of fabric structures along with the loading and unloading of equipment supply trucks. Position Responsibilities: • Assist in preparation, delivery and pickup of rental equipment as needed, • Assist in the assembly and disassembly of fabric structures, • Travel to and from the jobsites as needed, • Unload and carry equipment, materials, and supplies around the jobsite, • Safely and properly use forklifts and man-baskets to construct and takedown of structures., • Must be able to properly install fabric structures and ensure functionality of the structure throughout the contract of the customer, • Understand, identify, and use the proper hand tools for use on the jobsite, • Possess proficiency in the operation of all-terrain scissor lifts, forklifts and man baskets, • Clean up worksite from debris and discarded materials, • Build, repair, and maintain fabric and hard-side walls, doors, and framework, • Be aware of all and ensure necessary safety instructions for loading materials and equipment, along with installation and removal, • Assemble various tents per manufacturer, company, safety policy and procedures, • Coordinate with Field Supervisor on layout, • Ensure proper installation and layout of all rentals per agreement, specification, and CAD diagram, • Inspect tent and accessories for damages before removing. Complete paperwork if necessary, • Explain proper usage and safety features of equipment, • Adhere to all company policies, procedures, rules and regulations in written or verbal form, • Comply with government safety requirements and other regulations, • Perform other duties as assigned and required Requirements: Education & Experience: • Must have a high school diploma or equivalent GED., • Excellent verbal and written communication skills, • Basic mathematic skills, • Travel 80% of time Certifications on the job: • Tenting 101 - The Basics of Temporary Structures (Provided in house, not by a third party), • General Construction Site Safety - OSHA Basic Plus, • Federal Background Check - TWIC (Transportation Worker Identification Credential), • OSHA Operators Training on All-Terrain - forklifts, platforms (man lift, scissor lift directly) - Sunbelt, United, Registered Behavior Technician Base Pay Range: $18.99 - 27.30 Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: * Health, Dental and Vision plans * 401(k) Match * Volunteer time off * Short-term and long-term disability * Accident, Life and Travel insurance, as well as flexible spending * Tuition Reimbursement Options * Employee Assistance Program (EAP) * Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): * 12-25 vacation days depending on years of service * 5 sick days * 6 holidays * 2 half day holidays * 2 floating holidays * 1 inclusion day * 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

Job Description Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer * Competitive salary * Paid vacation/holidays/sick time- 10 days of vacation first year * Comprehensive benefits package including 401K, medical, dental, and vision care – Available day one * Encouraging and collaborative team environment * Dedication to safety through our Zero Harm policy * Check us out!: ___ What you will do Under general direction, responsible for the service & repair, design, configuration, and operation of complete HVAC building control systems and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the customers and JCI goals. Accountable for quality, timeliness and efficiency of Service & repair and designs. Develops complex software programs, commissioning and solving to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants, Sales and Service team and subcontractors. How you will do it * Designs, configures and services technically complex building control systems for the customers facility. Creates flow diagrams, sequence of operations, bill of material, network layouts, schedules and electrical schematics as required. * Develops and tests software programs necessary to operate the system per customer facility requirements' intent. * Coordinates and creates necessary drawings and equipment schedules for submittals, services and/or installation. * Selects, orders, and tracks the delivery of materials for assigned jobs. * Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and solves problems with subcontractors and other trades to ensure proper operation. * Provides field change information to the team for the creation of as-built drawings and software. * Keeps management and JCI contractor and customer informed of job progress and issues. * Assists in performing site-specific training for owner / operator on the total building control system. * Participates in coordination and release meetings with sales and service operations. Performs value engineering to provide cost effective results while maintaining customer satisfaction. * May provide work direction to Service Controls Technician I and Senior I and Senior II Controls Technicians. * Adheres to safety standards. High degree of regard to employee and subcontractor safety What we look for Required * Bachelor's degree in engineering and/or minimum 3-4 years' experience * Petro Chemical experience * Demonstrated knowledge of the construction or service, or HVAC industry. * Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. * Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., LON, BACnet, etc.). * Ability to relate technical knowledge to a non-technical audience. Demonstrated advanced computer skills required, particularly computer-related drafting tools. HIRING HOURLY RANGE: $32.70-$44.71 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at #TechHiring

Job Description Job Summary US AIR is expanding our team! We are seeking an experience Commercial and Residential HVAC service technician. The ideal candidate will have a strong background (at least two years' experience in (commercial and/or residential) in heating, ventilation, air conditioning, and, but not required, refrigeration systems. The HVAC Technician will be responsible for ensuring optimal performance and efficiency of heating and cooling systems while adhering to safety standards and regulations. Duties • Install, maintain, and repair HVAC systems including air conditioning units, furnaces, and refrigeration systems., • Troubleshoot and diagnose issues with HVAC residential and commercial equipment., • Collaborate with property maintenance teams to address HVAC-related concerns in commercial buildings., • Drive company vehicles to job sites as needed (Van driver responsibilities)., • Follow safety protocols and guidelines while working in the field. Experience • Proven experience in HVAC installation, maintenance, and repair is a must., • At least two years' experience as a service technician., • Familiarity with plumbing tasks related to HVAC systems is a plus., • Experience with field service operations within the HVAC industry. Benefits: • Company truck, • Fuel card, • Paid time off

Job Description Maintenance Technician At PODS, we pioneered portable storage and moving solutions—and our iconic containers are at the heart of everything we do. Our containers are more than equipment—they represent our brand, our safety standards, and our commitment to customers. As a Maintenance Technician, you’ll play a critical role in keeping our containers and facilities in top condition. This is an opportunity for a skilled, hands-on professional who takes pride in quality work, values safety, and enjoys working independently in a fast-paced environment. If you’re experienced with power tools, comfortable working with your hands, and committed to doing the job right the first time, we want to meet you! What You'll Do As a Maintenance Technician, you are the reason our customers feel confident trusting us with their belongings. Your day-to-day includes: • Performing a wide range of repair tasks using hand and power tools with minimal to no supervision, • Completing general carpentry repairs, painting, caulking, cutting, and cosmetic container repairs, • Operating forklifts safely (we’ll certify you if you’re not already certified), • Operating standard shop equipment and performing all required cutting operations safely, • Pressure washing and cleaning containers, • Safely rigging and lifting materials as part of repair work, • Moving materials using hand carts and assisting with staging and organization, • Following repair instructions and technical guidance while exercising sound judgment in execution, • Helping maintain a clean, safe, and organized warehouse environment, inside and out What You Bring to the Workbench • High school diploma or equivalent, • 3–5 years of experience in construction, building trades, assembly work, or a related hands-on field, • Proven experience using hand and power tools independently, • Ability to read and understand English in compliance with OSHA safety requirements, • Basic math skills for measurements and calculations, • Ability to become forklift certified and safely operate material-handling equipment, • Valid driver’s license with a clean driving record, • A safety-first mindset and attention to detail, • Strong time management skills and ability to prioritize tasks, • Solid work ethic—regular attendance and punctuality are essential Working Conditions & Physicality This is a high-energy, physical role. You’ll be: • Working in a warehouse/repair center that feels the seasons (non-climate controlled), • Standing, walking, kneeling, and crouching—sometimes working above head level or on a ladder, • Lifting and carrying items weighing up to 60 lbs., • Working a flexible schedule that may include Saturdays and overtime when the business is booming Why You’ll Love Working at PODS • Competitive compensation with opportunities for overtime., • Comprehensive benefits including medical, dental, vision, 401(k) with match, paid time off, holidays, and more., • Hands-on work with variety—no two days are exactly the same., • Supportive team culture built on our core values: We Care, We Work as a Team, and We Find a Way, • Ongoing training, including forklift certification, and real opportunities to grow your skills Compensation Our salary ranges are based on paying competitively for our company's size and industry and are one part of the total compensation package that also includes incentives, benefits, and other opportunities at PODS. In accordance with New York, Colorado, California, Washington and other applicable laws, PODS is required to provide a reasonable estimate of the compensation range for this role. Individual pay decisions are ultimately based on several factors, including qualifications for the role, experience level, skillset, geography, and balancing internal equity. A reasonable estimate of the current salary range is listed below. Pay Rate: $18.00 - $19.00 Ready to Build Your Career With PODS? Our Maintenance Technicians are trusted professionals who take pride in their work and play a key role in delivering a quality experience to our customers. If you're a dependable, skilled tradesperson looking for a role where quality matters and your work is valued, apply today. DISCLAIMER The preceding job description has been designed to indicate the general nature of work performed; the level of knowledge and skills typically required; and usual working conditions of this position. It is not designed to contain, or be interpreted as, a comprehensive listing of all requirements or responsibilities that may be required by employees in this job. Equal Opportunity, Affirmative Action Employer PODS Enterprises, LLC is an Equal Opportunity, Affirmative Action Employer. We will not discriminate unlawfully against qualified applicants or employees with respect to any term or condition of employment based on race, color, national origin, ancestry, sex, sexual orientation, age, religion, physical or mental disability, marital status, place of birth, military service status, or other basis protected by law. If there are any questions pertaining to this job posting, please contact PODS Recruiting Team at

Job DescriptionBenefits: • Competitive salary, • Health insurance, • Opportunity for advancement Company Overview At Voda, we specialize in a wide range of services to keep your home or business clean, fresh, and free from damage. Whether you need carpet and floor cleaning, upholstery cleaning, tile and grout cleaning, water or storm damage restoration, mold mitigation, air duct cleaning, or odor removal, we have the expertise and advanced techniques to deliver exceptional results. Cleaning and Restoration Technician Job Summary Providing excellent customer experiences in carpet and hard surface floor cleaning, water restoration and Mold remediation, etc. Cleaning and Restoration Technician Responsibilities • Perform Carpet and Hard Surface floor cleaning services., • Communicate effectively with customers., • Perform basic equipment maintenance., • Perform basic vehicle maintenance., • Inspect completed work., • Complete the technicians daily log., • Complete Work Orders., • Complete appropriate restoration documentation., • Maintain appearance and stock of appropriate tools, materials, and supplies for company vehicles., • Maintain inventory of related supplies.Restoration Technician Qualifications, • Education and Experience: High school diploma (or GED)., • Mathematical Skills: Adequate math skills. Ability to apply learned techniques to determine appropriate equipment type and number of units., • Computer Skills: Demonstrates basic proficiency in the use of computers, email, and portable devices used to report and record daily activity., • Certificates, Licenses, and Registrations: Certification in performing appropriate services a plus: Water Mitigation, Mold, Carpet cleaning, Tile and grout cleaning, etc.Apply now and let's embark on this thrilling journey together, making spaces shine and restoring lives with the power of Voda Cleaning and Restoration!

Job Description Residential HVAC Service Technician New Orleans, LA Since 1999, Christian Brothers Mechanical LLC has been a trusted provider of HVAC services in the Austell community. As a family‑owned company, we combine traditional values with modern expertise, focusing on reliability, integrity, and exceptional customer care. We are growing and looking for an experienced Residential HVAC Service Technician to join our team. Position Details Pay: $18/hr. - $25/hr.- Depending on Experience Schedule: Monday-Friday, 8:00 a.m.-5:00 p.m., with rotating on‑call shifts Benefits • Colonial Life Insurance, • Cancer, dental, life, and accidental insurance, • 40 hours of vacation, • 6 paid holidays + flex days, • Diagnose, repair, and maintain residential heating and cooling systems, • Provide outstanding customer service and clearly explain HVAC options, • Recommend products and solutions based on customer needs, • Deliver high‑quality workmanship while following all safety standards, • 1+ years of residential HVAC service experience, • EPA Certification, • Valid driver's license with an insurable driving record, • Strong communication and customer service skills, • NATE Certification

Job Description POSITION TITLE: Service Technician DEPARTMENT: Maintenance REPORTS TO: Maintenance Director CLASSIFICATION: Non-Exempt JOB SUMMARY: The Service Technician is responsible for performing maintenance and other duties to assure the preservation and upkeep of the building, fixtures, and residential spaces. VALUES MODELED: All employees are expected to find ways to bring our values to life every day by demonstrating: leadership, commitment, and integrity. MEASURES OF SUCCESS: Resident feedback on quality and timeliness of resident services provided; resident turnover. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Daily communication and coordination with other employees., • Respond to resident/management work orders for occupied and vacant rental units., • Repair/replace appliances, plumbing, and air conditioning/heating/electrical systems as needed., • Repair/replace apartment materials and perform maintenance requests., • Identify and perform routine preventative maintenance assignments., • Inspect and repair vacant units and prepare for move-ins., • Work on-call as scheduled 24/7, weekend shifts, and overtime as necessary and pre-approved by the Service Manager., • Perform tasks and operate machinery in a safe manner and in compliance with safety procedures., • Complete grounds work, such as grounds pick up, sweeping, and light landscaping., • Perform other duties as requested to support community operations., • Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence., • Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent., • Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Required • High school diploma or GED., • One year of general residential maintenance experience., • Working knowledge of HVAC, plumbing, electrical, fire protection, and energy management systems., • Certifications/licenses as required by local, state, or other regulations., • Must have reliable transportation, maintain auto insurance, and have a valid driver's license., • Strong communication and customer service skills., • Ability to work on-call as scheduled and work weekends and after hours as necessary. Preferred To perform the job successfully, an individual should demonstrate the following competencies: Productivity • Dependability - Follows instructions; responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals: completes tasks on time or notifies appropriate person with an alternate plan., • Initiative - Volunteers readily; undertakes self-development activities; seeks increased responsibilities; takes independent actions and calculated risks; looks for and takes advantage of opportunities; asks for and offers help when needed., • Integrity - Treats people with respect; keeps commitments; inspires the trust of others; works with integrity and principles; upholds organizational values., • Customer Focus - Responds promptly to customer needs; solicits customer feedback to improve service; responds to requests for service and assistance; meets commitments., • Judgment - Displays willingness to make decisions; exhibits sound and accurate judgment; supports and explains reasoning for decisions; includes appropriate people in decision-making process; makes timely decisions., • Analytical/Reasoning - Synthesizes basic and varied information; collects and researches data; uses intuition and experience to complement data and make recommendations., • Communications - Expresses ideas and thoughts verbally; expresses ideas and thoughts in written form; exhibits good listening and comprehension; keeps others adequately informed; selects and uses appropriate communication methods., • Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality., • Attendance/Punctuality - Is consistently at work and on time; ensures work responsibilities are covered when absent., • Continuous Learning - Assesses own strengths and weaknesses; seeks feedback to improve performance; pursues training and development opportunities; strives to continuously build knowledge and skills; shares expertise with others., • Job Knowledge - Exhibits competency in required job skills and knowledge; exhibits ability to learn and apply new skills; keeps abreast of current developments; requires minimal supervision; displays understanding of how job relates to others; uses resources effectively., • Conflict Resolution - Encourages open communication; confronts difficult situations; maintains objectivity; keeps emotions under control; uses interpersonal and negotiation skills to resolve conflicts., • Cooperation - Establishes and maintains effective relationships; exhibits tact and consideration; offers assistance and support to co-workers; works cooperatively in group situations; works actively to resolve conflicts. While performing the duties of this position, the employee is frequently required (50 to 100% of the time) to: • Walk the community., • Bend, stoop, squat, or kneel to perform maintenance activities., • Climb stairs to access upper level units and interior units with multiple levels. May need to climb or work from a ladder., • Push or pull to move equipment, appliances, and open or close doors., • Reach above shoulders to perform routine maintenance repairs, stock, and remove equipment., • Grasp, grip, turn hands, and have finger dexterity to handle sharp objects, maintenance tools, open and close ladders, use telephone/pager/two-way radio. While performing the duties of this position, the employee is required to lift, move, and carry items such as mail, supplies, packages, ladders, cases of paper, soda, or water according to the following frequency: • Between 1-25 lbs.: Constant Need (50 to 100%), • Between 25-75 lbs.: Frequent Need (33 to 50%), • Between 75-150 lbs.: Frequent Need (33 to 50%) Vision Requirements Specific vision abilities frequently required (50 to 100% of the time) by this job include close vision, color vision, depth perception, and ability to adjust focus to: • Complete maintenance and cleaning requests., • Complete forms, review reports, and enter data on the computer., • Observe areas needing attention or correction. Specific speaking and hearing abilities frequently required (50 to 100% of the time) by this job. • Verbally communicate via telephone and in person with staff, residents, vendors, etc., for the purpose of receiving information and or direction., • Expressing or exchanging ideas by means of the spoken word. May be scheduled for morning, afternoon, or evening shifts during the regular workweek and on weekends. ON-CALL WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts, and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. REASONABLE ACCOMMODATION To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The job duties, qualifications, work environment, and physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Health insurance, • Paid time off, • Vision insurance, • Dental insurance, • Free uniforms, • Training & development, • Company parties JOB SUMMARY This position will assist the lead Installation technician with the installation of heating and air conditioning replacement systems. JOB DUTIES • Must be able to work in hot and tight attics, • Completes installation paperwork in a neat, timely, and accurate manner that reflects all tasks performed for reporting accuracy and future comparison, • Uses drop cloths to protect clients floors while performing installation, • Always maintains a neat work area and inspects that area for cleanliness after completion of each job, • Conveys a safety-conscious attitude, both on the job and while driving, • Assists the Lead Installer with maintaining required production levels, • Complete Installation of HVAC equipment and Ductwork, • Move and remove Heavy EquipmentMINIMUM REQUIREMENTS, • Must be willing to show up on time and be reliable, • Ability to pass a background check and drug screen, • Clean driving record

Job Description Utility Locator (Field Technician) Starting pay $20.00! More than a Job! Stake Center Locating is hiring entry level Locate Technicians to locate underground utilities, troubleshoot, and mark the ground (using paint and flags), promoting damage prevention in your community. We will train you on the job and equip you with the basic skills to be successful in our 100% paid training. What you’ll need to bring is a preference to work outdoors in all weather, a desire to work independently and an ability to problem solve with speed and accuracy. What We Offer: Since 1997, we have been on a mission to make Stake Center a great place to work. We have been working with our locators to make Stake Center the company of choice. What we offer: • Pay Rate: $20.00 per hour., • We provide late-model vehicles with a fuel card that allows you to avoid high gas prices on your daily commute. In fact, you take the vehicle home every night (for company use only)!, • PTO and paid Holidays – best in class, • We are providing vouchers that can be used on 300+ types of Red Wing safety shoes (a total of $200 after every twelve months of service)., • 401(k) with company match Key Responsibilities: We will train entry level Locating Technicians to: • Think Safety First!, • Use a laptop computer to receive, document and process tickets and email., • Read maps, interpret blueprints, and determine the best method & sequence for locating., • Use provided locate equipment & technology to accurately locate underground utilities., • Communicate effectively with peers, managers, and homeowners. Qualifications: • Eighteen years of age or older., • High school diploma or equivalent., • Valid driver license with an acceptable driving record., • Ability to walk up to 5 miles a day 2-3 times a week., • Ability to carry up to 5 lbs of electronic locating equipment for extended periods of time; lifting objects up to 25 lbs or lifting in excess of 75 lbs with tool aids., • Pass pre-employment background and drug screening. Schedule: • Will need to have the ability to work a flexible schedule (some evenings, weekends, and an occasional Holiday) as ticket/production load requires., • Employees will respond to emergency calls during scheduled on-call shift rotation. We understand what is at stake for our employees, our customers, and our customers’ customers. That is why we continually invest in our people, equipment, and technology. To us you are a professional - this is a career not just a job!

Job DescriptionCompany Description Domino’s started back in 1960 as a single-store location in Ypsilanti, Michigan. Over the years, we expanded to three stores, and thus came the three dots on our logo. The original plan was to keep adding dots for every store, and at over 17,000 stores worldwide (6,300 in the U.S.) you can probably figure out why that original plan didn’t work. You might be thinking, “Wow, how does Domino’s get food to 17,000 stores?” Well, that’s where you come in. We have 22 food supply and dough manufacturing centers in the U.S., and seven more across Canada, Hawaii and Alaska. They provide fresh dough, equipment and supplies to franchise and company-owned Domino’s stores in the U.S. and Canada. In 2019 alone, these centers made 720,000 deliveries. Want to get in on the fun? We’d love to have you. Job Description POSITION SUMMARY The Maintenance Technician position requires one to have the technical skills to design, evaluate, troubleshoot, repair and install Bakery equipment. Electrical, Mechanical, Plumbing, Hydraulics, Pneumatics, Hydraulics, and Computer Controls are skills needed to perform this function. This team member performs the maintenance of a distribution manufacturing facility including: preventive maintenance, troubleshooting, repairs, installation of machinery relating to bakery food processing equipment, physical structures, mechanical and electrical systems. In addition, they must possess an awareness and understanding of how to work safely on mechanical and electrical equipment in a production environment. RESPONSIBILITIES AND DUTIES (30%) • Inspect, test, troubleshoot, repair and install machinery and equipment, • Monitor equipment to detect malfunctions, • Discuss machine operation variations with supervisor or other team members to diagnose problems and repair machines, • Install, repair or replace electrical devices such as transformers, relays, circuit breakers, starters, and safety and limit switches, • Layout, assemble, install, and maintain pipe systems and related hydraulic and pneumatic equipment, • Install, program and troubleshoot automated machinery and Programmable Logic Controllers, • Install, troubleshoot and repair refrigeration and Heating Ventilation Air Conditioning (HVAC) equipment, • Service and repair material handling equipment, • Monitor main electrical panel and troubleshoot as necessary, • Follow established preventative maintenance guidelines, • Coordinate with other departments to schedule maintenance for machines, • Perform all necessary maintenance and update logs as necessary, • Maintain building through painting, repairing minor structural problems, and other repairs as necessary, • Repair and maintain physical structure of establishment, • Ensure proper adherence to all safety and government guidelines, • Identify safety issues with machines; document issues; develop action plan to resolve concern; follow-up to ensure problems are resolved, • Assist in the control and scheduling of projects, • Monitor inventory and order parts as necessary, • Monitor energy usage and provide recommendations on better usageQualifications, • HS Diploma, and/or Technical School Training two years, and/or 3 to 4 years related experience, and/or licensed journeyman of a skilled trade, • Basic level computer skills for word processing and spreadsheets, • Ability to read and interpret blueprints, mechanical and electrical schematic diagrams, • Effective presentation skills to provide information to peers, upper management and team members in oral and written form, • Ability to define problems and draw conclusions, • Ability to interpret technical instructions and diagrams, • EPA REFRIGERATION CERTIFICATION helpful. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionLane Valente Industries offers a broad range of solutions that help multi-site organizations reduce costs through energy reduction, facility maintenance and value engineering. Our solutions have uncovered significant savings for our customers when reducing both energy and maintenance costs. We exploit new technology and embrace client feedback to constantly improve our entire product range. With a thirty-year track record, we attribute our success to our solid commitment to client satisfaction, attention to detail, dependable service, and a pride in our quality of work. We have operations in a variety of locations across the United States. We are looking for talented people who value integrity, the value of an honest day's work, and shared success. If you believe you are one of those talented people, and are interested in being considered for a career at Lane Valente Industries, we invite you to apply today! HVAC Manager/Service Tech for company that handles service work and site maintenance for national accounts. Job Responsibilities & Requirements • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Able to Quote jobs., • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Review product sales metrics and work with on developing appropriate product selling plans and programs, • Effectively perform needs assessments, develops sales proposals, estimates, specifications and presentations BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations yIsu1OAGoL

Job Description JOB SUMMARY The Maintenance Technician is responsible for preventive and corrective maintenance of entire property. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform service requests per work orders. • Assist with apartment turnover procedures., • Make regular inspections of grounds, building, plumbing, electrical fixtures, appliances and major equipment., • Assist in maintaining inventory of tools, equipment, and supplies., • May be responsible for grounds maintenance to include mowing, fertilization and watering of lawn, as requested. Adhere to the designated dress code as stipulated for the specific role. SUPERVISORY DUTIES: None KEY CONTACTS Maintains critical relationships with the following: Staff, residents and vendors. KNOWLEDGE, SKILLS AND ABILITIES: Experience in general maintenance to include heating, air conditioning, electrical and plumbing equipment, and carpentry. • High School diploma or its equivalent., • Must be able to communicate effectively., • Must be capable of using extension ladder to access roof, windows, and siding to make repairs as needed., • Must be able to lift and carry fifty (50) lbs. Must have: • Current driver’s license issued by state of residence, • Current Vehicle Inspection Decal, • Current Louisiana vehicle insurance, • Current vehicle registration in state of residence, • Satisfactory Motor Vehicle Report Must be able to lift up to 50 pounds. Moderate noise levels. Frequent walking, grasping, carrying, bending, crouching, and reaching in order to perform duties for the position. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description GMH Communities, Headquartered in Philadelphia, PA, is a dynamic real estate company specializing in the acquisition, development, and management of exceptional living communities throughout the United States. Our student living sector provides our residents with leading-edge amenities, community spaces, and apartments to maximize their college experience. Job Description: The Maintenance Technician reports to the Maintenance Supervisor and is responsible for assisting in all of the properties maintenance needs, physical appearance, and work orders. The Maintenance Technician’s primary responsibilities include hands on maintenance of the property including general upkeep and repair to units and the grounds, responding according to company policy to work order requests, turn and make ready process, and maintaining excellent resident relations through outstanding customer service. Rotating on call & some weekend availability required. Responsibilities: • Participate in the daily operations of the property, • Respond to Work Orders per company policy, • Grounds and exterior upkeep, as needed, • The Turn and Make Ready process, • Conduct regular health and safety inspections, • Inspecting units for Move In readiness, • Ensure company policy and state and federal safety and fair housing laws are adhered to, • Hands on maintenance, • A minimum of 1 year maintenance experience, required, • Maintenance experience in multi-unit complexes or hotels preferred, • Experience with plumbing, electrical and HVAC, preferred, • HVAC Certification, preferred, • Mechanical background, preferred, • Good organizational and people skills, • Must be able to lift and work with heavy equipment, • Health, Vision, and Dental Insurance for you and your dependents, • Prescription Drug Plan, • Employee Assistance Program, • Short-Term Disability & Long-Term Disability Insurance, • Group Life Insurance, • 401(k) Program with Employer Contribution, • Generous Paid Vacation, Sick Time and Holidays, • Paid Parental Leave, • Direct Deposit, • Collegial Work Environment, • Time off to Volunteer, • Employee Referral Program, • Voluntary benefits GMH Associates, Inc. does not accept recruiting agency resumes. Please do not forward resumes to our employees. GMH Associates, Inc. is not responsible for any fees related to unsolicited resumes. This position description is intended to describe the general content of and requirements for the performance of the job. The statements contained in the position description are not necessarily all-inclusive and additional duties and responsibilities may be assigned as determined by business needs. This position description does not constitute a written or implied contract of employment. Visit our new website GMH Associates, Inc. is an Equal Opportunity Employer #LI-DNP

Job Description Location: Baton Rouge, LA Job Title: Residential HVAC Service Technician How would you like to join a growing company with decades of experience behind it. Built on honest work, quality craftsmanship, and round-the-clock availability, the team delivers dependable comfort all year long and you can make a direct impact on the team. Job Summary: With our company, you're not just another number — you're part of a small, tight-knit team that takes pride in doing quality work without the corporate nonsense. No upsell quotas. No endless approval chains. No getting lost in a fleet of hundreds. Just solid work, a dependable crew, and an environment where what you do actually matters. If you're someone who takes pride in your craft and wants to work somewhere that values it — keep reading. Responsibilities: • Diagnose, repair, and maintain residential and light commercial HVAC systems, • Communicate clearly with customers, explaining issues and solutions in a way that builds trust, • Keep your truck organized, stocked, and job documentation accurate and complete, • Work independently while supporting teammates when jobs require extra hands, • Represent Shield professionally in the field — like it's your own name on the truck Qualifications: • EPA 608 Certification (required), • 3+ years of hands-on HVAC experience (residential or light commercial), • Strong diagnostic and repair skills with minimal supervision, • Valid driver's license with a clean driving record, • Pride in workmanship — not just moving on to the next call, • Ability to work independently while contributing to a team environment, • Clear, professional communication with customers and coworkers Benefits: • Competitive pay based on experience and performance (OTE: $65k - $150K+ per year depending on experience), • Fully stocked company vehicle (take-home), • Medical and dental insurance, • Paid time off (PTO), • Paid holidays, • Paid training and ongoing education support, • A team that shows up for each other — no one gets left hanging, • Straightforward management: clear expectations, no micromanaging, • No sales pressure or upsell quotas We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.

Job DescriptionSalary: Centurion Maintenance is seeking a motivated professional to fulfill our Maintenance Technician position. Centurion Maintenance is a facility maintenance company based in Baton Rouge, LA servicing the commercial, industrial, and municipal markets throughout the Gulf Coast. Job Summary: Responsible for maintaining, troubleshooting and repairing, or arranging for repairs of all building operating systems on the site. Technicians will be assigned to multiple locations and must be available for after-hour emergency calls. Reports to: Maintenance Manager Essential Job Duties: • Be familiar with and conform to all written operating procedures associated with the site., • Maintain organized files. Required Skills and Abilities: Must have at least 5 years of experience • Light carpentry replace trim boards, wall studs, flooring, etc., • Sheetrock work replace sheet rock on walls, tape, and float/finish texture a plus., • Light plumbing replace under sink plumbing, install faucets, install water heaters, fix water leaks, replace water spigots, etc., • Door repairs install/adjust door closers, replace hinges, handles, deadbolts, etc., • Leak repairs find and repair leaks in windows, doors, metal roofs, shingle roofs, etc., • Painting painting walls, ceilings, doors, trim, etc., • Exceptional customer service skills., • Ability to think ahead to the next work order/repair to be done., • Time Management Education and Experience: • High School Diploma, • Five (5) years previous experience, • Proficient in computer, text, and email skills, • May perform other duties as assigned. Requirements: • Well groomed, neat appearance, • Must be able to pass drug test(s) as required by company, • Observe all company procedures and safety rules, • Work as a part of our team to ensure customer satisfaction At Centurion Maintenance, we provide our clients with high quality, high value maintenance and repair services while maintaining superior levels of communication, professionalism, integrity, and honesty with our staff, clients, suppliers, and professional associates.

Job Description POSITION TITLE: Service Technician DEPARTMENT: Maintenance REPORTS TO: Regional Maintenance Director CLASSIFICATION: Non-Exempt JOB SUMMARY: The Service Technician is responsible for performing maintenance and other duties to assure the preservation and upkeep of the building, fixtures, and residential spaces. VALUES MODELED: All employees are expected to find ways to bring our core values to life every day by being: Driven, Enthusiastic, Team Player and Humbly Confident. MEASURES OF SUCCESS: Resident feedback on quality and timeliness of resident services provided; resident turnover. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Daily communication and coordination with other employees., • Respond to resident/management work orders for occupied and vacant rental units., • Repair/replace appliances, plumbing, and air conditioning/heating/electrical systems as needed., • Repair/replace apartment materials and perform maintenance requests., • Identify and perform routine preventative maintenance assignments., • Inspect and repair vacant units and prepare for move-ins., • Work on-call as scheduled 24/7, weekend shifts, and overtime as necessary and pre-approved by the Service Manager., • Perform tasks and operate machinery in a safe manner and in compliance with safety procedures., • Complete grounds work, such as grounds pick up, sweeping, and light landscaping., • Perform other duties as requested to support community operations., • Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence., • Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent., • Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Required • High school diploma or GED., • One year of general residential maintenance experience., • Working knowledge of HVAC, plumbing, electrical, fire protection, and energy management systems., • Certifications/licenses as required by local, state, or other regulations., • Must have reliable transportation, maintain auto insurance, and have a valid driver's license., • Strong communication and customer service skills., • Ability to work on-call as scheduled and work weekends and after hours as necessary. Preferred To perform the job successfully, an individual should demonstrate the following competencies: Productivity • Dependability - Follows instructions; responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals: completes tasks on time or notifies appropriate person with an alternate plan., • Initiative - Volunteers readily; undertakes self-development activities; seeks increased responsibilities; takes independent actions and calculated risks; looks for and takes advantage of opportunities; asks for and offers help when needed., • Integrity - Treats people with respect; keeps commitments; inspires the trust of others; works with integrity and principles; upholds organizational values., • Customer Focus - Responds promptly to customer needs; solicits customer feedback to improve service; responds to requests for service and assistance; meets commitments., • Judgment - Displays willingness to make decisions; exhibits sound and accurate judgment; supports and explains reasoning for decisions; includes appropriate people in decision-making process; makes timely decisions., • Analytical/Reasoning - Synthesizes basic and varied information; collects and researches data; uses intuition and experience to complement data and make recommendations., • Communications - Expresses ideas and thoughts verbally; expresses ideas and thoughts in written form; exhibits good listening and comprehension; keeps others adequately informed; selects and uses appropriate communication methods., • Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality., • Attendance/Punctuality - Is consistently at work and on time; ensures work responsibilities are covered when absent., • Continuous Learning - Assesses own strengths and weaknesses; seeks feedback to improve performance; pursues training and development opportunities; strives to continuously build knowledge and skills; shares expertise with others., • Job Knowledge - Exhibits competency in required job skills and knowledge; exhibits ability to learn and apply new skills; keeps abreast of current developments; requires minimal supervision; displays understanding of how job relates to others; uses resources effectively., • Conflict Resolution - Encourages open communication; confronts difficult situations; maintains objectivity; keeps emotions under control; uses interpersonal and negotiation skills to resolve conflicts., • Cooperation - Establishes and maintains effective relationships; exhibits tact and consideration; offers assistance and support to co-workers; works cooperatively in group situations; works actively to resolve conflicts. While performing the duties of this position, the employee is frequently required (50 to 100% of the time) to: • Walk the community., • Bend, stoop, squat, or kneel to perform maintenance activities., • Climb stairs to access upper level units and interior units with multiple levels. May need to climb or work from a ladder., • Push or pull to move equipment, appliances, and open or close doors., • Reach above shoulders to perform routine maintenance repairs, stock, and remove equipment., • Grasp, grip, turn hands, and have finger dexterity to handle sharp objects, maintenance tools, open and close ladders, use telephone/pager/two-way radio. While performing the duties of this position, the employee is required to lift, move, and carry items such as mail, supplies, packages, ladders, cases of paper, soda, or water according to the following frequency: • Between 1-25 lbs.: Constant Need (50 to 100%), • Between 25-75 lbs.: Frequent Need (33 to 50%), • Between 75-150 lbs.: Frequent Need (33 to 50%) Vision Requirements Specific vision abilities frequently required (50 to 100% of the time) by this job include close vision, color vision, depth perception, and ability to adjust focus to: • Complete maintenance and cleaning requests., • Complete forms, review reports, and enter data on the computer., • Observe areas needing attention or correction. Specific speaking and hearing abilities frequently required (50 to 100% of the time) by this job. • Verbally communicate via telephone and in person with staff, residents, vendors, etc., for the purpose of receiving information and or direction., • Expressing or exchanging ideas by means of the spoken word. May be scheduled for morning, afternoon, or evening shifts during the regular workweek and on weekends. TRAVEL Some travel between communities may be required for this job. WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts, and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. REASONABLE ACCOMMODATION To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The job duties, qualifications, work environment, and physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Page Break

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company car, • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Flexible schedule, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development We also provide excellent benefits that include health insurance, a 401(k) plan, workers' compensation, paid holidays, and paid vacation. Our team also enjoys steady work, a stocked company vehicle, cutting-edge technology, excellent growth potential, and a friendly work environment! This position also receives 100 hours each year of training and has access to our in-house NATE training and certification. Can you go into our clients' homes to diagnose and repair their HVAC equipment? Can you help customers make informed and confident decisions? Are you an outgoing person who works well in a fast-paced, goal-driven environment? If yes, complete our initial mobile-friendly application and get ready to join the best HVAC specialist in the area. We look forward to meeting you! ABOUT ONE HOUR AIR CONDITIONING & HEATING OF BATON ROUGE Since 1981, One Hour Air Conditioning & Heating of Baton Rouge has been a family-owned company. Over the last few decades, we've proudly served the residents and businesses who needed our help in Baton Rouge and the surrounding areas. We believe in upfront, straightforward prices, guaranteed work, and personable service. We're different because of our commitment to treating customers like neighbors. We're members of the same communities that we serve, so treating our customers right is second nature to us! In order to maintain great relationships with our clients, we also have to maintain great relationships with our employees. We know that our best assets are our people, which is why we offer opportunities for career advancement, high-income potential, and a fast-paced, fun work environment. We also have a full-time in-house training program and train twice a week to increase skill level, pay, and personal stock! RESIDENTIAL HVAC SERVICE TECHNICIAN QUALIFICATIONS • Two (2) years of experience as a residential HVAC Service Technician is preferred, but we welcome any driven, hardworking employee., • Environmental Protection Agency (EPA) certification, • A valid driver's license, • A clean driving record, • NATE certification is a plusDo you have good communication skills and the ability to express technical information in layman's terms? Are you clean, organized, and efficient? Do you take pride in your work? Are you trustworthy and respectful of others and their personal property? Do you present yourself professionally? Do you have a passion for this industry and a desire to improve your knowledge? If so, apply now!