Oil jobs in Downey, CaliforniaCreate job alerts

Company Description National Signal LLC specializes in the design and manufacturing of portable solar construction equipment and advanced traffic safety products. Known for its innovative solar-powered LED light towers, message signs, and arrow boards, the company is at the forefront of sustainable technology solutions for infrastructure and construction needs. By 2025, the product line will expand to include solar-powered generators and mobile surveillance trailers. National Signal LLC is committed to providing reliable, energy-efficient solutions that promote safety and sustainability. Role Description National Signal is in search of a talented Electro-Mechanical Engineer, with excellent critical thinking and troubleshooting skills to design future products and update existing equipment. This role will be a central figure driving engineering projects and activities for the company. They will work closely with Sales and Operations on key customer issues, cost, and quality improvement. This role will report directly to the VP of Engineering for National Signal. There are currently no direct reports for this role, however, this individual is the team leader providing guidance and direction for the Engineering group. Essential Duties and Responsibilities include the following: 1. Product Design and Development, 2. Proficiency in Solidworks, 3. Electro-mechanical design and component selection, 4. MS Office, including Outlook, Word, and Excel Required Skills: 1. 12+ years in mechanical design using metal tubing, sheet metal, hydraulics, etc.. a. Trailer / structural / fastener design using bending moment / FEA to calculate stress b. Using Solidworks / AutoCad to do layout drawings from concept to prototype 2. Experience with small diesel engine operation a. Basic operation of a small diesel engine. b. Knowledge of wet stacking and prevention. c. Enclosure design for airflow for engine temperature management. d. Engine control programming and communication with the engine to allow system to run correctly. Ex. where to tap for engine start/stop, monitor rpm, oil temp, oil pressure, voltage (starter & bank), canbus, fuel start/stop, etc. 3. Experience with photovoltaic systems a. Basic operation of a solar/battery/load system. 4. Experience with hydraulic systems • Understanding of hydraulic pump, hydraulic cylinder, hydraulic manifold. 5. Basic AutoCad a. Majority of the layout drawings were done in AutoCad. Ability to do drawings for wiring diagrams in AutoCad or equivalent 2D software. 6. Fundamental understanding in electrical layouts. Experience in solar power systems., 7. Research new technologies and determine whether they are fit for our products., 8. Analyze and test new designs to determine the best materials and processes and create documentation and reports., 9. Ability to work hands on to solve complex problems., 10. Create detailed parts & assembly drawings, bills of material and working models in Solidworks., 11. Perform structural analysis, wind load calculation, and fatigue analysis where required. Desired Skills 1. Experience with lighting, 2. Understanding of codes such as ANSI and ASTM, 3. Excellent verbal and written English skills Education & Experience Requirements 1. Bachelor’s degree in mechanical engineering or similar from an accredited college or university is required., 2. Master’s degree in engineering or business is preferred but not required Other Characteristics 1. Possesses and maintains a valid passport, 2. Ability and willingness to travel within the US and internationally, 3. This position may require up to 15% travel to attend business meetings, trade shows, conferences, supplier reviews, and customer events Base Salary: $110,000 - $120,000

The Director of Manufacturing will lead the production, planning, quality inspection and inventory control teams and work with the test and engineering teams for successful LRIP (Low-Rate Initial Production) of our Subsurface Compressor Systems; perform cost reduction; improve productivity, ensure quality builds; and ensure deliveries are made on time. Essential Duties and Responsibilities: • Lead and direct the manufacturing team to meet delivery commitments., • Develop and maintain the Master Production Schedule; identify risks and take mitigating actions to address them preemptively., • Ensure production builds meet delivery, design, quality and forecasted budget., • Drive the S&OP forecasting process based on sales outlook, fleet support and internal usage., • Maintain spare part requirements for the operating fleet including R&D. Drive the S&OP process through purchase approvals., • Institute plans to improve productivity, reduce build costs and execute high quality builds. Continue to implement KPIs for these and define and track performance metrics, including OTTR and forecast accuracy., • Initiate NCR and follow through to closure to correct and prevent re-occurrence of manufacturing issues., • Verify quality traceability in the production management systems per ISO 9001, • Ensure build procedures are consistently followed and operators are trained., • Build hardware failure contingency plans for production work and field support to reduce delivery risk and lead times, • Implement 5S, including a special focus on safety assessment and PPE., • Assist in dispositioning discrepant material and ensuring engineering intent is met in the manufacturing process., • Contribute to and comply with ISO9001. Skills, Experience, Education, and Abilities: • BS degree in a technical field (Manufacturing, Industrial or Mechanical Engineering preferred) or equivalent combination of education/experience., • A minimum of 7 years progressive and related experience required., • Demonstrated ability to support hands-on decision making, management, mentoring and development of technicians and engineers in a highly collaborative environment., • Ability to read prints and familiar with interpretation of GD&T call outs., • Strong understanding of geometric tolerancing per ASME Y14.5, dimensional stack-ups, inspection procedures and metrology equipment., • Experience building turbomachinery, which includes high-speed rotating equipment, electric motors, compressors and oil management systems., • Familiar with creating ERP system BOM’s & Routers; experience with Global Shop is a plus., • Knowledge of standard manufacturing processes for complex, precision turbo machinery: casting, machining, milling, grinding, rotor balancing, mechanical and electrical assembly, inspection techniques, oil management systems (tubing, fittings, etc.) and pressurized assemblies., • Experience with NPI of complex equipment., • Kaizen, 5S, Six Sigma, Demand Flow Technology, Lean Manufacturing, ISO 9001 experience is a plus., • Experience configuring assembly lines, in-process Kanban’s and visual work instructions is a plus., • Good interpersonal and interfacing skills (i.e. communicating well with people across different departments both internally and externally), • Additional computer skills: Microsoft Office Suite Intangibles Sought: • Able to exercise independent judgment and make decisions on technical issues., • Ability to establish positive rapport with individuals at all levels of organization., • Ability to motivate working team through leadership and “can do” attitude., • Self-awareness; not afraid to ask for help or admit error., • Willingness to engage in constructive debate., • Ownership, initiative and accountability., • Flexibility in range of responsibilities. Supervisory Responsibilities: Position will lead the manufacturing team. Position will be responsible for directing and coordinating activities of others to meet company objectives. Physical Demands / Work Environment: Time will be split between office and shop floor. Personal protective equipment, such as safety glasses, gloves, or masks may be required in some assembly areas. Some travel will be required as needed for vendor visits/qualifications.

Job Description Tire Tech/General Service Tech Employment type: Full-time Growing Tire and Automotive Service Company is seeking an experienced Tire Installer/General Service Tech. Immediate openings available. The ideal candidate will have: • Experience in mounting, dismounting, balancing Passenger and Light Truck tires, including low profile, large diameter wheels., • Experience in replacing TPMS sensors, • Experience in proper lifting of vehicles using hoists, floor jacks, jack stands, etc., • Experience in properly changing oil on a wide variety of vehicles using a double check system. Employer will also consider recent graduates or students of a certified Automotive Technology program. As this position is an entry level position intended to provide the experience to become an Automotive Technician. Please submit a resume that includes your work history and your automotive training for a quick response. We are an equal Opportunity Employer. Company DescriptionWe are a growing Tire & Automotive Service Company, Our Company is a family owned business operating since 1975. We offer our customers great Tire Brands. We are a growing company and offer great pay, benefits, and career opportunities.We are a growing Tire & Automotive Service Company, Our Company is a family owned business operating since 1975. We offer our customers great Tire Brands. We are a growing company and offer great pay, benefits, and career opportunities.

Job Description $1,200 SIGN-ON RETENTION BONUS SCHEDULE: DAY SHIFT JOB DUTIES: This position requires basic mechanical skills to perform preventative maintenance on all furnaces and compressors, which includes but not limited to the following: -Inspect spark plugs and make sure that they are functioning properly. -Grease all furnace components such as bearings, pulleys and other parts that may require greasing. -Inspect all belts on pulleys and other motors that drive fans. -Check all compressors and perform basic oil changes. -You will be required to climb furnace, while wearing fall protection, to perform these tasks. -Other duties as assigned REQUIREMENTS: We are seeking candidates with the following qualifications: • High school diploma or GED equivalent, • Previous experience with industrial manufacturing or general labor is preferred., • Overtime and availability to work weekends may be required., • Possess basic welding and fabrication skills, as well as basic electrical skills., • Ability to comprehend & communicate effectively in English (Spanish is a plus).

Upwing Energy is searching for an experienced Material Planner & Scheduler in support of building downhole compressor systems for the oil and gas industry in a LRIP (Low-Rate Initial Production) environment. This role is responsible for managing demand requests to reduce lead times for orders and ensuring adequate spare part availability whilst minimizing inventory costs. Essential Duties and Responsibilities: • Develop and Maintain the Master Production Schedule, • Accept internal orders and tabulate them on the Order Board, • Create and maintain forecasts based on the sales pipeline as well as maintaining spare part requirements for the operating fleet including R&D. Drive the S&OP process through purchase approvals., • Manage changes in customer orders and implementation of ECRs as dispositioned., • Identify schedule risks and take mitigating actions to address them preemptively., • Contribution to and compliance with ISO9001., • Define and track performance metrics including OTTR and forecast accuracy. Skills, Experience, Education, and Abilities: • Previous experience as a Master Planner and minimum of 5 years working in Material Resource Planning, including operations producing low-volume high-complexity products in a regulated industry, • BS in Planning, Industrial Engineering, Business or related field or equivalent experience, • Experienced with Microsoft business applications., • Experienced with one or more ERP systems for material planning functions. Global Shop preferred., • Experience working in ISO9001 quality environment., • CPIM certification desirable Intangibles Sought: • Must be detail oriented and organized, • Must be a team player, able to communicate to multiple levels of the organization effectively, and able to motivate and develop subordinates, • Ownership of department procedures – ability to define and implement effective lean business processes Physical Demands / Work Environment: Personal protective equipment should be worn in designated shop floor areas.

Job Description Are you a motivated automotive enthusiast looking for the right opportunity to begin a rewarding career in the industry? Do you take pride in solving problems and learning new skills? If you're ready to make your mark on the auto repair world, join Tire Pros in Montebello, CA as our new full-time Tire and Lube Technician! Keep reading to learn how you can level up your career with our skilled team. THE BASICS Pay: Depending on experience, you earn $17.00 - $20.00/hour. Benefits: • Health Insurance, • Dental Insurance, • Employee Discount Program, • Paid Time Off (Accrued Vacation and Sick hours), • Relevant experience or mechanical skills is a plus (we will train you!), • Positive, "can-do" attitude, • Excellent communication and interpersonal skills WHAT TO EXPECT Your role revolves around completing quality services and developing your skill set. Working seamlessly with your auto repair team, you tackle a variety of tire- and lube-related responsibilities. We provide training to help you get the hang of the role, and you take advantage of learning opportunities to expand your knowledge. You inspect tires to look for leaks and to check tread wear, and you carefully demount, mount, and balance them. Attentive to detail, you also conduct multi-point vehicle inspections and perform basic services like oil and filter changes. Every day provides new opportunities to grow your skills and positively impact customers! ABOUT US? Tire Pros has been providing our customers with high-quality products and services for years. We offer top-of-the-line tire brands as well as automotive repair and maintenance services. Whether it's a tires, alignment, brakes, suspension, or preventive care, it's no problem for our team. Our goal is to provide professional service and a hassle-free experience, every time. We have a rock-solid reputation for providing excellent services, support, and satisfaction. We build relationships for the long haul. We know that we would not be able to provide this level of service without our hard-working team. We value each employee and encourage growth. We do our best to attract and retain the highest-caliber employees by providing a fun and friendly work environment along with excellent training and development, competitive compensation, and top-tier benefits. Apply now to start your exciting new career with a strong and stable company. Level up your auto repair career by joining us as our new Tire and Lube Technician! We're excited to meet you and see what you bring to the table. Job Posted by ApplicantPro

Pactiv Evergreen - - Responsibilities: Install and maintain production machines and plant equipment; Diagnose and repair mechanical, pneumatic, and hydraulic failures; Read and interpret mechanical prints and diagrams; Perform oil and lubricant cycles per schedule; Complete maintenance documentatio

Job DescriptionBenefits/Perks • Careers Advancement Opportunities, • Flexible Scheduling, • Use your expertise and diagnostic tools to evaluate vehicle malfunction codes, • Assist with establishing service center procedures for tracking repair status, maintaining technical documentation, and other necessary protocols, • Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements, • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes, • Ensure a high level of customer satisfaction and repeat business, • Convey necessary vehicle repair information to customers in a clear and concise mannerQualifications, • High school diploma or GED is required, • An associate degree or completion of an automotive service technician training program is preferred, • Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred, • Strong customer service and communications skills are required

Job DescriptionBenefits/Perks • Careers Advancement Opportunities, • Flexible Scheduling, • Use your expertise and diagnostic tools to evaluate vehicle malfunction codes, • Assist with establishing service center procedures for tracking repair status, maintaining technical documentation, and other necessary protocols, • Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements, • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes, • Ensure a high level of customer satisfaction and repeat business, • Convey necessary vehicle repair information to customers in a clear and concise manner Qualifications, • High school diploma or GED is required,, • An associate degree or completion of an automotive service technician training program is preferred, • Automotive Service Excellence/ASE certification preferred, • Strong customer service and communications skills are required, • Mechanical and troubleshooting skill and ability to operate electronic diagnostic equipment, • Excellent customer service skills basic computer competencies

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. LOhiGlT6VK

Our focus is in the transportation of bulk aviation fuels, however, we also specialize transport a variety of other petroleum-based products such as Jet Fuel, Renewable Fuels, Marine Gas Oil, Ethanol, Diesel Exhaust Fluid (DEF), Biodiesel, Red Dye Off-road Diesel, AV Gas, Clear Diesel Fuel, Bunker F

Join Our Team!!At World Oil we strive to be an employer of choice by recruiting, developing, and retaining a high performing and diverse workforce.As a family-owned company, our focus in work life balance fosters a healthy, safe, and productive work environment for all employees.World Oil values its

Walmart - 8450 La Palma Ave - [Tire Tech / Lube Tech / Automotive / up to $26-hr] - As a Tire & Lube Associate at Walmart, you'll: Ensure customers have a great first and last impression; Have a valid driver's license; Change oil, tires, and perform other general maintenance; Become certified on and

HVAC or Diesel Generator Mechanic. Robust technical training programs, in person and virtual, on diesel, gas, compressed air, electrical, controls, oil free air compressors, HVAC, microgrid & storage and more. Perform preventive maintenance and repairs of power generators, diesel engines, electrical

More than 75 years later, learn more About Us at: . World Oil Environmental Services recycles, produces, and transports vital petroleum products and provides important environmental services in California and throughout the western United States. World Oil offers competitive hour

CDL B Truck Driver-Local Routes. As a CDL-certified Delivery Service Driver, you willoperatean automatic straight truck (12,000-20,000 lb. GVW) on local delivery routes, delivering cooking oil to commercial kitchens while ensuring safe,accuratedeliveries and excellent customer service.

We are currently seeking a Lubes Driver to deliver bulk lubricants, coolants, and packages of oil to company and customer facilities as assigned in accordance with company procedures. This driver will work safely and in compliance with all customer, local, state, and federal guidelines. Based on per

Join Our Team!!At World Oil we strive to be an employer of choice by recruiting, developing, and retaining a high performing and diverse workforce.As a family-owned company, our focus in work life balance fosters a healthy, safe, and productive work environment for all employees.World Oil values its

Job Description We are seeking an experienced Maintenance Mechanic to join our team. This position is responsible for maintaining and servicing machinery used in the production of paper bags, ensuring equipment operates safely and efficiently. The ideal candidate will have strong mechanical troubleshooting skills and experience performing preventative maintenance in a manufacturing environment. This is a temp-to-hire onsite role, and candidates must be flexible to work across all scheduled shifts. Key Responsibilities * Prioritize safety and model safe work practices at all times * Service and maintain machines used in paper bag production * Adjust and troubleshoot bag-making equipment to maintain safe and efficient operation * Perform preventative maintenance such as greasing, oiling, and inspecting machine components * Ensure equipment runs efficiently and at posted operating speeds * Perform machine lubrication according to maintenance schedules * Inspect equipment and replace worn or defective parts * Assist with machine rebuilds and repairs when necessary * Support production teams with roll changes and machine adjustments * Troubleshoot equipment issues and assist operators when machines go down * Help train new and current employees on equipment operation and safety procedures * Ensure finished products meet standards for safety, quality, efficiency, and waste reduction * Perform additional duties assigned by supervisors or shift leads Qualifications & Requirements * Previous Maintenance Mechanic experience in a manufacturing environment * Experience performing preventative maintenance on production machinery * Ability to grease, oil, and maintain machine components * Experience with machine adjustments and troubleshooting * Knowledge of lockout/tagout safety procedures * Basic low-voltage electrical knowledge preferred * Must have your own maintenance tools * Strong mechanical troubleshooting and problem-solving skills * Ability to communicate effectively with operators, supervisors, and maintenance personnel

Job Description Position Overview This position is responsible for the repair of all equipment related to plant operations, services, and facilities back to OEM specifications. Incumbent works closely with the Plant Maintenance Supervisor and Maintenance Engineering Manager, and other maintenance team members to provide preventative maintenance to meet production goals, ensure a safe work environment, and meet customer specifications. Essential Duties and Responsibilities • Performs highly diversified duties to install and maintain all production machines and the plant facility's mechanical equipment., • Detects and diagnoses mechanical failures, including pneumatic and hydraulic malfunctions of equipment, repairs, and replaces as necessary., • Utilizes precision measuring tools/devices, hand tools, and testing instruments to ensure equipment installation and alignment are within OEM specifications., • The ability to read and understand mechanical prints and technical diagrams for the installation and repair of equipment, • Completes oil and lube cycles on all equipment at the manufacturer's recommended intervals., • Maintains housekeeping in areas of assigned responsibility to ensure a safe and clean work environment., • Performs other related duties to contribute to the success of the operation as assigned, including but not limited to equipment tooling, changeovers, and equipment startups., • Ability to perform strenuous work, • Ability to understand and follow written and verbal instructions from equipment manuals., • Ability to perform complicated maintenance repairs individually by contacting SME & without close supervision., • Ability to establish an effective working relationship with other employees, • A strong mechanical aptitude., • Previous electrical experience with troubleshooting capabilities., • Knowledge of electrical repairs and duties., • Experience in using all common hand and power tools, • Skills to service and provide general building maintenance, • HS Diploma or equivalency, • Must have no more than 4 attendance points, • Must not have a step 2 disciplinary action within the last year, • Ability to stand, walk, bend, stoop, kneel, crouch, and climb ladders for extended periods., • Frequently required to lift and carry up to 50 pounds independently., • Use of hands and arms to handle tools, operate machinery, and perform maintenance tasks with precision., • Comfortable working in a variety of environmental conditions, including hot, cold, wet, dusty, or noisy areas., • Visual acuity to read technical documents, safety warnings, and perform detailed inspections., • Ability to respond to auditory signals, alarms, and verbal instructions., • OEM (Original Equipment Manufacturing), • Mechanical Troubleshooting Skills, • Hydraulics Experience, • Oil Changes, • Pneumatics Troubleshooting, • Thermoforming Experience, • Thermoforming Machine, • Conveyor Systems

Our focus is in the transportation of bulk aviation fuels, however, we also specialize transport a variety of other petroleum-based products such as Jet Fuel, Renewable Fuels, Marine Gas Oil, Ethanol, Diesel Exhaust Fluid (DEF), Biodiesel, Red Dye Off-road Diesel, AV Gas, Clear Diesel Fuel, Bunker F

The Auto Care Center is a rewarding place to work with opportunities for advanced associate training, business development, and application of technology. Are you an ace with car maintenance? With over 2500 auto centers nationwide staffed by certified technicians, we perform millions of tire and oil

Job DescriptionTruck Driver Job Summary Operates 26Ft—flatbed truck with a capacity of a maximum of 26,000 pounds. General Accountabilities Checks vehicles to ensure that mechanical, safety, and emergency equipment is in good working order. Maneuvers trucks into loading or unloading positions, Collects delivery instructions from appropriate sources, verifying instructions and routes. Maintains logs of working hours or of vehicle service or repair status, following applicable state and federal regulations. Reports vehicle defects, accidents, traffic violations, or damage to the vehicles. Secures cargo for transport, chains, binders, and straps. Drives trucks with capacities greater than three tons, to transport and deliver products, and materials. Obtains receipts or signatures for delivered goods. Inventories and inspects goods to be moved to determine quantities and conditions. Communicates necessary information with bases, supervisors, or other drivers. Performs basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid or performing minor repairs. Reads bills of lading to determine assignment details. Checks all load-related documentation to ensure that it is complete and accurate. Reads and interprets maps to determine vehicle routes. Loads and unloads trucks, or helps others with loading and unloading, operating any special loading-related equipment on vehicles, and using other equipment as necessary. Removes debris from truck bed and truck cabin. *ExpressRun Inc. reserves the right to add or change duties at any time. Job Qualifications Education: None required. Experience: 1 year of verifiable experience as a truck driver (24ft. truck or larger) License: Valid California Drivers' License Skills Judgment and decision-making, Operation monitoring, Time management, Troubleshooting, Equipment

Job Description J&K Manufacturing Who We Are J&K Manufacturing produces high-precision parts for the aerospace and defense industry. We are committed to quality, precision, and reliability, supporting a manufacturing environment where safety, cleanliness, and attention to detail matter. The Role J&K Manufacturing is seeking a reliable and detail-oriented Parts Cleaner to join our team. In this role, you will be responsible for cleaning, degreasing, and preparing machined and manufactured components for the next stage of production, inspection, assembly, or final clean. This position plays an important role in maintaining product quality by ensuring parts are free of oils, chips, oxidation, residue, and other contaminants. The ideal candidate is safety-conscious, dependable, and committed to following established procedures and quality standards in a manufacturing environment. Key Responsibilities • Clean and prepare machined, fabricated, or production parts using approved cleaning methods and equipment, • Remove oil, grease, metal chips, dirt, oxidation, and other contaminants without damaging part surfaces or finishes, • Operate cleaning equipment such as aqueous wash systems, ultrasonic cleaners, hand cleaning tanks, vapor degreasers, or other approved systems, • Follow work instructions, job travelers, and production requirements to ensure parts are cleaned to specification, • Visually inspect cleaned parts to verify cleanliness and overall condition before releasing them to the next department, • Identify contamination, surface defects, or part damage and notify the appropriate supervisor or quality personnel, • Accurately complete required production logs, cleaning records, and job travelers, • Monitor cleaning solutions, tanks, and related equipment to ensure proper operation and compliance with process requirements, • Perform basic housekeeping and routine maintenance on cleaning equipment and the work area, • Handle, store, and dispose of chemicals and hazardous materials in accordance with company procedures, OSHA requirements, and environmental regulations, • Maintain a clean, organized, and safe work environment at all times, • Prevent cross-contamination by properly handling parts during and after the cleaning process Required Qualifications • High school diploma or equivalent preferred, • Ability to read and follow work instructions and job travelers, • Strong attention to detail and ability to identify contamination or irregularities on parts, • Ability to safely handle cleaning agents, chemicals, and production equipment, • Ability to work independently and as part of a team in a fast-paced environment, • Reliable attendance and a strong commitment to workplace safety and quality standards, • Ability to stand for extended periods and lift or move parts and materials as needed, • Ability to use hands for detailed and repetitive work, • Experience with ultrasonic cleaning, hand cleaning, vapor degreasing, or aqueous wash systems, • Prior experience in a manufacturing, machine shop, industrial, or parts cleaning environment, • Experience working with machined metal parts or in a precision manufacturing environment, • Medical and Vision Coverage, • 401(k) retirement, • Generous PTO Policy, • Paid Holidays, • Monthly Team Lunch, • Paid company closure between Christmas and New Year's, • Year-end bonus opportunity

Senior JIB Accountant for Large E&P Oil and Gas Investment Group! Hybrid Remote This Jobot Job is hosted by: Jade Greenlee Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $110,000 per year A bit about us: We are an OKC based investment group seeking a Sr Financial Reporting Accountant to join our energy team. Why join us? • Summer Half Fridays, • Room for Growth, • Work from Home Fridays, • Team Environment, • Retirement Plan, • Health Insurance Job Details Job Details: We are seeking a dynamic and experienced Permanent Senior Jib Accountant to join our team in the Energy industry. In this role, you will be tasked with managing the Joint Interest Billing (JIB) process, ensuring the accuracy and timeliness of invoicing and revenue recognition. You will be a part of a team that is at the forefront of the energy sector, working on groundbreaking projects that are shaping the future of the industry. Responsibilities: 1. Manage the Joint Interest Billing (JIB) process, ensuring accuracy and timeliness of invoicing and revenue recognition., 2. Utilize Ogsys software to maintain and manage financial records, generate reports, and perform financial analysis., 3. Collaborate with cross-functional teams to support the upstream process and ensure all financial aspects are accounted for accurately., 4. Oversee the preparation of monthly, quarterly, and annual financial statements in compliance with applicable standards and regulations., 5. Perform variance analyses and prepare account reconciliations., 6. Assist with internal and external audits to ensure compliance., 7. Develop and implement process improvements to enhance the efficiency and accuracy of the JIB process., 8. Provide guidance and support to junior accounting staff, fostering a culture of continuous learning and improvement. Qualifications: 1. Bachelor's degree in Accounting, Finance, or related field. A Master's degree or CPA certification is a plus., 2. Minimum of 5 years of experience in JIB accounting, preferably in the energy industry., 3. Proficiency in Ogsys software is a must., 4. Demonstrated experience in upstream processes., 5. Strong understanding of Generally Accepted Accounting Principles (GAAP)., 6. Exceptional analytical skills and experience creating detailed reports and presentations., 7. Excellent interpersonal and communication skills, with the ability to effectively communicate complex financial information to non-financial stakeholders., 8. Proven ability to work collaboratively in a team environment and manage a team., 9. High level of integrity and dependability with a strong sense of urgency and results-orientation. This is an excellent opportunity for a seasoned JIB accountant to take on a challenging and rewarding role in a dynamic and fast-paced industry. If you are passionate about the energy sector and have a track record of success in JIB accounting, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Manual Lathe Operator A Manual Lathe Operator sets up and operates manual horizontal lathes to turn, bore, face, and thread metal or plastic workpieces based on blueprints. Key duties include installing cutting tools, monitoring machine speeds, and verifying dimensions with precision gauges (micrometers, calipers). They must maintain a safe, clean work area, perform, and perform, basic machine maintenance. Key Responsibilities • Machine Setup: Interpret blueprints, schematics, and work orders to determine dimensions and tool requirements., • Operation: Manually operate lathe machines to cut, shape, and finish materials, including turning, boring, threading, and drilling., • Quality Inspection: Measure completed parts using precision instruments like micrometers, calipers, and dial gauges to ensure conformity to specifications., • Tool Maintenance: Select, install, and replace cutting tools; sharpen tools as needed., • Material Handling: Load and unload workpieces, often using hoists or cranes., • Experience: Generally 3-5 years of experience operating manual lathes., • Technical Skills: Strong understanding of machining techniques, blueprints, and metallurgy., • Measurement Tools: Proficiency with inspection tools (micrometers, gauges)., • Physical Stamina: Ability to stand for long periods, lift heavy materials, and work in a manufacturing environment., • Regularly standing, walking, bending, and crouching., • Lifting and moving heavy materials, often with machinery. Company DescriptionSmall business with long term employees, great environment and culture!Small business with long term employees, great environment and culture!

Job DescriptionPosition Description: Job Summary:In this role, you will be responsible for diagnosing, repairing, and maintaining a variety of diesel-powered vehicles and equipment. You will perform basic care and maintenance, including changing oil, checking fluid levels, and rotating tires.This role requires a strong understanding of vehicle maintenance, diagnostics, and repair techniques to ensure the safe and efficient operation of our fleet. You will work on various equipment, including tractor-trailers, and be responsible for troubleshooting mechanical issues.Key Responsibilities: Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Perform preventative maintenance inspections and services on commercial vehicles Troubleshoot and repair a wide range of mechanical and electrical problems. Maintain accurate records of all repairs and services performed. Order and maintain inventory of parts and supplies. Inspecting vehicle systems, including suspensions, steering and exhausts Repairing or replacing vehicle transmissions, brakes, engines and other associated parts Conducting field visits in the case of an emergency or sudden breakdown Test driving repaired vehicles to gauge their performance Completing oil changes, wheel balancing, alignment and brake checksMaintaining records of parts inventory and serviced vehiclesEducation, Experience and Licensing Requirements:Valid Driver's License Advanced knowledge of a vehicle, its electrical system and the mechanisms of a diesel engine In-depth knowledge of diesel engine components and operational mechanisms Superior knowledge of maintenance tools and repair equipment Comfortable using mechanical and electrical power tools Excellent problem-solving skills Proficiency in the use of diesel engine diagnostic software Effective collaboration and communication skillsCompensation based on experience

Job Description Location: Cerritos, CA (Onsite) | Type: Full-Time| Compensation: $19.00 per hour / $21.00 Flag Rate Norm Reeves Dealerships is a nationally-recognized group of privately-owned retail automotive dealerships located in Southern California, Texas, and Florida. With a history dating back to 1963, our group has established a reputation for innovation, integrity, and customer-centric services. We are expanding rapidly and are looking for talented individuals that are eager to grow their careers while the company continues to expand! We’re looking for a Fleet Express Technician to support Ford of Cerritos. This role is ideal for someone with hands-on automotive experience who enjoys staying active, working efficiently, and being a key part of the service flow. Previous experience is preferred, but we’re open to candidates with related mechanical or lube/express experience who are ready to learn. Core Responsibilities * Perform oil changes, tire rotations, and basic maintenance services * Complete multi-point inspections and report findings to advisors or technicians * Assist with fleet vehicle servicing and maintenance needs * Mount, balance, and rotate tires * Replace filters, fluids, wiper blades, batteries, and other basic components * Maintain a clean, safe, and organized work area * Follow dealership and manufacturer service procedures * Work closely with technicians, advisors, and the service team to support daily operations Automotive, lube, express, or mechanical experience preferred • A valid driver’s license and acceptable driving record Ability to stand, bend, lift, and work on your feet throughout the day Benefits & Employee Perks * Medical, Dental, Vision, and Complimentary Life Insurance * 401k Matching and FSA * Tuition Reimbursement * Paid Time Off (accrues) * Supplemental Insurance (Hospital, Accident, Critical Illness) * Discounts on Vehicles, Services, and Parts Tips for a Successful Application & Interview Process: * Bring Your Best Resume – Upload your most recent version so we can see all you've accomplished * Transitioning from Another Industry? – A cover letter helps! Use it to highlight transferable skills that make you a great fit * Dress to Impress – First impressions count. Dress professionally and bring your authentic self • Rescheduling or Canceling Interviews – Life happens! If you need to reschedule or cancel, let us know ahead of time. No-shows will be noted, so communication is key

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, & ASE certifications are preferred & rewarded Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Responsibilities Reyes Fleet Management, 1 of the largest privately held fleets in the U.S., is seeking a Diesel Mechanic / Fleet Technician B to help with the repairs and maintenance of our tractor and trailer equipment at our Reyes Coca-Cola Bottling shop in Downey. You will also be working on our light duty vans (Ford and Chevy) and MHE equipment. Shift: Full-Time l Sunday, Monday, Thursday, Friday, Saturday 3:00pm-11:30pm OR Sunday, Monday, Tuesday, Friday, Saturday 3:00pm-11:30pm Pay: $40.49/hr Perks and Benefits: • Union benefits plus pension, • Vacation and sick time, holiday pay, • Tool and Boot allowance, • Company provided uniforms, • CDL and ASE certifications incentive pay, • Annual raises, • Career advancement opportunities after 6 months of employment, • Health, dental, and vision coverage including multiple medical plans to choose from. Position Responsibilities: • The Fleet Technician focuses on the preventative maintenance of the fleet diesel equipment, identifying root causes of basic failures to perform repairs as needed, • As the Fleet Technician, you will complete thorough documentation for work orders of repairs and preventative maintenance, • You will inspect brake systems to ensure that machines are in proper operating condition and make sure that equipment has required licensing and registration, • You will use hand tools and power tools such as screwdrivers and perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery, • You will examine and adjust protective guards, loose bolts, and specified safety devices, • Other duties as assigned Qualifications Required Education and Experience: • High School Diploma or General Education Degree (GED) and 1 to 2 plus years of related experience, • Ability to frequently lift 50 pounds, occasionally lift 100 pounds, • Must possess own tools (have minimum tool requirement), • Technical School Certification

Job DescriptionSalary: $27.57 + commission Join Our Team!!At World Oil we strive to be an employer of choice by recruiting, developing, retaining, a high performing and diverse workforce. As a family-owned company, our focus in the work life balance fosters a healthy, safe, and productive work environment for all employees. More than 75 years later, learn more About Us at:. World Oil Environmental Servicesrecycles, produces, and transports vital petroleum products and provides important environmental services in California and throughout the western United States. We deliver more than just high-quality, high-performance products and services. We believe in doing things right and doing them well every day.World Oil offers competitive hourly pay. Company Benefits include multiple Medical/ Dental plan options, Vision, Life Insurance, 401(k) with employer match, STD/LTD, Paid Holidays, Vacation, Sick Time, and so much more! We are seeking an experienced Local Commercial Driver for aFull-time position in Compton, CA. Pay Range: $27.57 - $31.57 per hour ($3.00 to $4.00 per hour is included in rate to be earned as commission) Position Summary: The Driver position is responsible for the pick up and delivery of hazardous waste and/or non-hazardous waste and/or material or other products at various customer locations. The Driver drives to multiple customer job sites to perform various environment services; i.e. picking up used oil, used antifreeze and oily water, and delivery to a Transfer Disposal Storage Facility. The position may also include picking up and delivering full or empty drums or other containers of hazardous waste or non-hazardous waste or material. Essential Duties and Responsibilities: The essential functions include, but are not limited to the following: • Operates a commercial vehicle in a safe manner on a daily basis., • Plans a route and completes customer service requests in an efficient manner., • Completes their pre-trip inspection daily to determine the unit safe to operate., • Maintains basic vehicle maintenance, including fueling vehicle., • Drives and pulls into customer site to pump oil or pick up drums in a safe manner., • Offloads oil into railcar or offload drums into trailers., • Communicates with customers, supervisors, and other employees effectively., • Offloads trucks into tank farm Other Functions: • Provides professional, respectful, and courteous customer service at all times., • Completes required annual training via online or a classroom type setting., • Performs other related duties as assigned. Required Qualifications: • High School Diploma or equivalent (G.E.D.)., • 21 years of age or older, • Commercial Class A/B Drivers License with all endorsements., • 1 year of experience driving a commercial vehicle and maintaining a Commercial Class A/B drivers license preferred., • Ability to lift up to 50LBS., • Manual and Automatic Transmission required, • Must be able to work Monday through Friday (available to work on Saturday) 5:00 am - 3:00pm EEO Statement: It is the policy of World Oil and its subsidiaries to provide equal opportunity for all applicants and employees. The Company does not discriminate on the basis of race, age,color, religion, sex/gender, gender identity/gender expression, sexual orientation, marital status, medical condition, military/veteran status, national origin, ancestry, disability, genetic information, reproductive health decision making, or any other status protected by state or federal law.

Job DescriptionSalary: $23 - $25 (DOE) Come Join our Bakersfield Safety Team with World Oil Transportation! Join Our Team!! At World Oil we strive to be an employer of choice by recruiting, developing, and retaining a high performing and diverse workforce. As a family-owned company, our focus in work life balance fosters a healthy, safe, and productive work environment for all employees. World Oil values its amazing workforce that has contributed to the companys success for over 80 years! Learn more about us at:. As part of the Companys employment screening process, any applicant, to who an offer of employment is made must pass a test for controlled substances, under the procedures of World Oil Drug & Alcohol policy. Employment offers are conditioned on a negative test result. In this role you will be tasked with daily duties such as: • Performs a variety of administrative tasks, including filing, data entry, and correspondence with management., • Routing and scheduling with drivers to ensure customer satisfaction., • Data entry of all service orders and fulfills completed orders., • Maintains and completes filing of service orders and route sheets., • Scans all completed reports to internal/external customers., • Collaborates with management to help modify routes to accommodate the needs of customers., • Cultivates strong relationships with drivers and customers to reduce service disruptions from last minute schedule changes., • Monitors any sudden route changes or road construction issues and work with drivers to establish new routes for timely pick up and deliveries., • Shift Hours (1 Opening): Wednesday - Sunday 4PM - 12:30AM We offer great benefits, including: • Strong work/life balance in a local position, • Medical, Dental, and Vision coverage, • 401k with Company Match, • Paid vacation time, • Paid sick time., • Paid training, • And more! EEO Statement: It is the policy of World Oil and its subsidiaries to provide equal opportunity for all applicants and employees. The Company does not discriminate on the basis of race, age, color, religion, sex/gender, gender identity/gender expression, sexual orientation, marital status, medical condition, military/veteran status, national origin, ancestry, disability, genetic information, reproductive health decision making, or any other status protected by state or federal law.

Job Description Great Opportunity to Join a Stable Family Owned Company with a great work/life balance. Now Hiring an Auto Mechanic! If you are interested in a good job and good benefits, a GREAT environment, Team Work and a lot more, Then you may owe it to yourself to check us out!!! Only a one spot open!!! Must be an Energetic Team Player With Professionalism, Passionate About Helping People *** PTO, Medical, Vision and Dental Care Benefits If you're a Mechanic or a Mechanic's Apprentice looking for growth with a company that will help you perfect your craft and continue to invest in you, this is the opportunity for you. We are proud to offer a family-style work environment and above market pay, in addition to competitive benefits packages. This position is ideal for someone who is eager to immediately start working towards a Career. Benefits: • Paid Time Off, • Must work well individually and as part of a team., • Follow the outline of the company policies and procedures., • Communicate professionally and respectfully with customers, office staff and coworkers., • Some experience servicing, repairing and basic oil changes, and other tasks as assigned. Background and Drug Screening will be done before an offer is made.

Job Description The Pack Label, Inc. (TPL) is a high energy, visionary manufacturing and fulfillment company proudly rooted in the hemp industry. We are passionately dedicated to producing superior quality product offerings while maintaining an unwavering commitment to innovation, precision, and excellence in execution. Our in-house brands, MUNCHIES! and Imperial Extraction, showcase our drive for innovation. Delta Munchies transforms the hemp-derived cannabinoid experience with products that are as fun as they are revolutionary, while Imperial Extraction raises the bar with premium extracts that exemplify superior quality and craftsmanship. At TPL, we operate like a championship team, fast-paced, collaborative, and obsessed with results. Every team member plays a critical role in delivering exceptional service and product quality for our customers. We take enormous pride in the work we do, the relationships we build, and the impact we make together. Position Summary: The Quality Assurance & Quality Control (QA/QC) Manager reports to VP of Operations and is responsible for developing, implementing, and overseeing a first-in-class quality program across Hemp Preroll, Vape, and Gummy Edible manufacturing operations. This role ensures all raw materials, in-process products, and finished goods meet regulatory requirements, internal specifications, and customer quality standards. The ideal candidate possesses deep expertise in hemp flower and strain evaluation, a strong understanding of extract-based vape products and edible formulations, and the technical capability to design, equip, and operate an internal QA/QC laboratory supporting a diversified hemp product portfolio. Key Responsibilities: Quality Systems, Compliance & Regulatory Oversight • Design, implement, and maintain a comprehensive Quality Management System (QMS) across prerolls, vapes, and gummy edibles., • Develop and control SOPs, work instructions, batch records, and specifications for:, • Hemp flower intake and storage, • Preroll manufacturing, • Vape formulation, filling, and packaging, • Gummy edible production and packaging., • Ensure compliance with:, • Federal and state hemp regulations, • GMP and food-grade manufacturing requirements (for edibles), • OSHA and workplace safety standards, • Serve as the company’s subject-matter expert for hemp flower quality and strain performance., • Establish strain-specific quality standards covering visual characteristics, terpene and aroma integrity, freshness, moisture content, and water activity levels., • Oversee best practices for hemp flower handling and storage, including environmental controls, FIFO and lot traceability procedures, and contamination or degradation prevention., • Oversee QA/QC processes for vape cartridges, disposables, and related hardware., • Ensure the quality and consistency of distillates and cannabinoid extracts, terpene blending accuracy, and compatibility between oil formulations and vape hardware., • Implement inspection and testing protocols for fill weights, volume accuracy, viscosity, flow consistency, and hardware functionality., • Establish and enforce food-grade quality standards for gummy edible manufacturing., • Oversee ingredient verification, allergen management, recipe accuracy, batch consistency, and product standards for texture, flavor, and appearance., • Ensure weight uniformity and cannabinoid homogeneity across edible batches while maintaining compliance with sanitation, hygiene, and GMP food manufacturing practices., • Lead the design and build-out of an internal QA/QC laboratory that supports quality testing for flower, vape, and edible products., • Identify, procure, and manage laboratory equipment such as precision balances, moisture analyzers, water activity meters, microscopy tools, airflow and draw resistance testing devices, environmental monitoring systems, and viscosity and fill-volume verification tools., • Establish calibration, validation, and maintenance programs for all laboratory equipment., • Train production, fulfillment, and inventory teams on quality standards, inspection procedures, and GMP best practices., • Work closely with operations, production, R&D, and supply chain teams during new product introductions, strain launches, process changes, and production scale-ups., • Track and analyze quality performance metrics including defect rates, scrap, rework, yield loss, COA pass and fail trends, and customer complaints or returns., • Conduct root cause analysis on quality issues and implement corrective and preventive actions to prevent recurrence., • 5+ years of QA/QC experience in hemp, cannabis, nutraceutical, food, or regulated manufacturing environments., • Demonstrated expertise in hemp flower inspection, strain familiarity, and preroll quality control., • Experience overseeing quality programs for extract-based and/or edible products., • Hands-on experience building or managing a QA/QC lab or inspection program., • Strong working knowledge of GMPs, SOP development, CAPA, and audit readiness., • Experience with high-volume preroll manufacturing and automated equipment., • Experience with vape filling equipment and gummy production lines., • Knowledge of terpenes, cannabinoids, stability testing, and shelf-life validation., • Ability to work in manufacturing, warehouse, and laboratory environments, • Ability to stand, walk, and perform inspections for extended periods., • Full-time employment., • Compensation: $70,000-$80,000 annual base salary., • Benefits: Medical insurance, PTO, Sick Time, Holidays, • Retirement: 401k through Guideline, • Hybrid: 7am-4pm PST, minimum 2 days per week on-site @ Santa Fe Springs, CA Headquarters Powered by JazzHR L70EQDYObK

Job Description Location: Cerritos, CA (On-Site) | Type: Full Time | Hourly: $19/hr As an Express Technician, you’re one of the most important team members at Norm Reeves Ford. You’re responsible for showing our guests a super experience and getting them on the road quickly. You’ll provide light vehicle maintenance, keep a safe, neat workspace, and handle your responsibilities with honesty and integrity. Your work will ensure guests leave 100% satisfied with their Norm Reeves location experience. This role is a great entry point into your career with us! What You’ll Do: • Deliver your guests’ cars every time, on time, as promised, • Perform oil changes, check batteries, and top off fluids, • Inspect brake linings and adjust if necessary, • Rotate, repair, mount, and balance tires according to vehicle standards, • Conduct multi-point inspections (121-point inspection) and alignment checks, • Perform minor services including software updates, key programming, and windshield wiper and filter replacements, • Take detailed notes during and post-inspection, • Keep work station clean at all times, • Full time availability. You’ll also need to be at least 18 years old, • A valid driver’s license and acceptable driving record, • Experience at an Automotive School or Program, • Automotive 609 Certificate a plus Medical, Dental, Vision, and Complimentary Life Insurance * 401k Matching and FSA * Tuition Reimbursement * Paid Time Off (accrues) * Supplemental Insurance (Hospital, Accident, Critical Illness) * Discounts on Vehicles, Services, and Parts

Job DescriptionCompany Description At Buena Park Honda, a Sonic Automotive family dealership, you'll find the opportunities, resources, and support you need to grow and develop professionally. Our 100+ dealerships are concerned with more than moving inventory; they're committed to your success and invested in your future. So read on, and consider a rewarding career with Sonic Automotive, Inc. Salary: $19.00/hr (The Lube Technician Position has a Pay Scale consisting of the following elements and ranges. Wages include Base Hourly Compensation of $19.00) Job Description ESSENTIAL JOB REQUIREMENTS AND RESPONSIBILITIES: Be directly responsible for the following items, as set at the sole discretion of the company, which may be changed from time to time: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Drains oil from crankcase and refills with required amount of oil., • Replaces oil and air filters., • Inspects vehicle fluid levels, replaces or replenishes as necessary., • Checks tire pressure and adds air if needed., • Lubricates moving parts with specified lubricants., • Communicates with parts department to obtain needed parts., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Communicates immediately with service advisor immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time., • Documents all work performed and recommended on the repair order., • Participates in manufacturer-sponsored training programs, schools and events., • Keeps abreast of manufacturer technical bulletins., • Reports machinery defects or malfunctions to Service Manager., • Ensures that guest’s cars are kept clean. Notifies service advisor immediately of anything that has happened to change the appearance or condition of the vehicle., • Maintains and is accountable for all dealership owned tools and manuals. Returns them to the proper place and in the same condition as they were when checked out., • Understands, keeps abreast of, and complies with federal, state, and local requirements, such as hazardous waste disposal, OSHA Right-to Know, etc., • Operates all tools and equipment in a safe manner., • Wears and utilizes all safety equipment at all times., • Reports any safety issues immediately to Service Manager., • Keeps shop area neat and clean., • Maintains a safe work environment., • Maintains a professional appearance and wears dealership provided uniforms., • Follow directions from a supervisor., • Understand and follow work rules and procedures., • Interact well with others and be a positive influence on associate morale. Additional Information .It's time to make the most important move of your career. From our cooperative, team-based approach, to our more than 1,000 internal advancements each year, it's easy to see the difference. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. All your information will be kept confidential according to EEOC guidelines

Job Description Location: Cerritos, CA (On site) | Type: Full Time | Pay: $24/hr | Schedule: Monday - Friday As a Utility Technician with recall duties at Norm Reeves Ford, you will be responsible for supporting various aspects of production and quality assurance, with a specific focus on conducting recall inspections of vehicles. In addition to your PDI responsibilities, you will perform routine maintenance services. What You'll Do: • Conduct recalls to ensure they meet Ford's quality standards and specifications., • Perform visual and functional checks of vehicle components, systems, and features according to established inspection procedures., • Identify and document any defects, damages, or issues discovered during the inspection process, and coordinate with appropriate teams for resolution., • Carefully performing oil changes, battery checks, topping off fluids, • Inspecting brake linings and making adjustments if necessary, • Rotating tires and implementing tire repairs according to vehicle standards, • Effectively mounting and balancing tires, • Performing alignment checks, • Conducting multi-point inspections (121-point inspection), • Assisting in various minor services including software updates, key programming, and replacing windshield wipers, • Full time availability. You’ll also need to be at least 18 years old, • A valid driver’s license and acceptable driving record, • Experience at an Automotive School or Program, • Automotive 609 Certificate a plus Medical, Dental, Vision, and Complimentary Life Insurance * 401k Matching and FSA * Tuition Reimbursement * Paid Time Off (accrues) * Supplemental Insurance (Hospital, Accident, Critical Illness) * Discounts on Vehicles, Services, and Parts

Job Description We are part of the Premier Automotive Group, an established, successful dealer group with over 33 stores in 5 states nationwide! We represent top brands such as Chevrolet, Honda, Toyota, Nissan, Kia, Dodge, Chrysler, Jeep and Fiat. Premier is actively involved in giving back to our community in a HUGE way with our "Giving Hope Foundation." More information on the benefits and career paths that Premier offers can be found at WhyPremierTech.com Responsibilities for Automotive Quick Lube Technician • Ability to perform oil changes, tire rotations and basic maintenance services., • Ability to perform Multi Point Vehicle inspections., • Must have a strong understanding of maintenance intervals., • Must be able to properly rack and lower vehicles., • Must be able to work in a fast paced environment, • Must have strong attention to detail, focused on safety and quality., • High school and/or trade school education required, • At least one year of relevant experience preferred, • Must posses strong communication skills, • Must have basic computer skills necessary to use factory software, • Must be able to pass pre-employment screens (Background DMV and Drug ), • Medical Insurance, • Dental Insurance, • Vision Insurance, • Short-term Disability Insurance, • Employee Discounts, • Life insurance Job, • Paid vacation and sick leave, • Matching 401K retirement plan, • Type: Full-time, • Minimum 1 years shop experience preferred, • GM experience a plus, • Proficient time management and organizational skills, • Exemplary communication and customer service skills, • Motivated, self-starter with a superior work ethic

Job DescriptionAt Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for automotive technicians/mechanics that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas automotive technician, youll be exposed to and have responsibility for performing a wide range of diagnostics, repairs and maintenance, including: • Diagnostics using state-of-the-art computer systems, • Tires and tire repair, • Car heating and air conditioning, • Steering and suspension, • Belts and hoses, • Radiator and engine cooling systems, • Batteries, starting and charging, • Steering and suspension, • Brakes and brake repair, • Oil changes, • Check engine light, • Mufflers and exhaust services, • Visual safety and courtesy inspectionsQualifications, • Ability to repair vehicles independently, while also having experience working well in a team environment, • Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics, • Track record of high personal productivity, • Knowledge of, and adherence to, safety and environmental standards for repair facilities, • Experience using shop equipment such as lifts, tire changing equipment, alignment machines and scan tools, • High School Diploma or equivalent - technical degree a definite plus, • State-specific auto repair certifications, • Valid drivers license, • Own tools/equipment (diagnostic scanner / tools preferred also), • Able to service both foreign and domestic vehicles

Job Description At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for automotive technicians/mechanics that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas automotive technician, youll be exposed to and have responsibility for performing a wide range of diagnostics, repairs and maintenance, including: • Diagnostics using state-of-the-art computer systems, • Tires and tire repair, • Car heating and air conditioning, • Steering and suspension, • Belts and hoses, • Radiator and engine cooling systems, • Batteries, starting and charging, • Steering and suspension, • Brakes and brake repair, • Oil changes, • Check engine light, • Mufflers and exhaust services, • Ability to repair vehicles independently, while also having experience working well in a team environment, • Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics, • Track record of high personal productivity, • Knowledge of, and adherence to, safety and environmental standards for repair facilities, • Experience using shop equipment such as lifts, tire changing equipment, alignment machines and scan tools, • High School Diploma or equivalent - technical degree a definite plus, • State-specific auto repair certifications, • Valid drivers license, • Own tools/equipment (diagnostic scanner / tools preferred also), • Able to service both foreign and domestic vehicles

Job Description Great Opportunity to Join a Stable Family Owned Company with a great work/life balance. Now Hiring an Auto Mechanic! If you are interested in a good job and good benefits, a GREAT environment, Team Work and a lot more, Then you may owe it to yourself to check us out!!! Only a one spot open!!! Must be an Energetic Team Player With Professionalism, Passionate About Helping People *** PTO, Medical, Vision and Dental Care Benefits If you're a Mechanic or a Mechanic's Apprentice looking for growth with a company that will help you perfect your craft and continue to invest in you, this is the opportunity for you. We are proud to offer a family-style work environment and above market pay, in addition to competitive benefits packages. This position is ideal for someone who is eager to immediately start working towards a Career. Benefits: • Paid Time Off, • Must work well individually and as part of a team., • Follow the outline of the company policies and procedures., • Communicate professionally and respectfully with customers, office staff and coworkers., • Some experience servicing, repairing and basic oil changes, and other tasks as assigned. Background and Drug Screening will be done before an offer is made.

Job DescriptionBenefits: • Opportunity for Growth, • Dynamic Environment, • Team Member Discount We are looking for just the right Heart of House (Kitchen) Team Members to jump in the game! Buffalo Wild Wings is a fun, fast-paced environment. We create legendary experiences for our guests and can only do that with team members like YOU! This position is responsible for the preparation and production of all Buffalo Wild Wings menu items. Several roles within this position include the Chip, Shake, Grill, Southwest, and Expo stations. Chip Station: • Responsible for all preparation of fried chips, wedges, and onion rings prepared in the kitchen of the restaurant. Ensure all chip coolers are clean and free of extra debris, • The Chip position portions and prepares food items prior to cooking in accordance with the Chip Packaging Chart., • Other duties include maintaining the fryers and the quality of the shortening/oil as outlined in the Fryer Rotation Chart and Shortening Management Reference Guide.Grill Station:, • Prepares all grilled items such as chicken breast, and burger patties, • The Grill person portions and prepares food items prior to cooking in accordance with the Prep Sheets and Grill Station Chart., • Other duties include maintaining the grill and quality of the products outlined in the Prep Sheets and Grill Station Guide.Shake Station:, • Ensure all sauce pumps are cleaned, filled, and in working order, • Ensure all sauce and seasoning buckets have been washed and dried, • Ensure all seasoning shakers are clean, filled no more than full, • Ensure hot wing holding drawers are turned on, and are at 180F with the vents open, • Weigh wings to determine cooking timeSouthwest Station:, • Responsible for all preparation of wraps, salads, flatbreads, etc., • Responsible for maintaining cold rail and making sure food is properly stocked, • Job Title Cook Department Heart of House, • Reports To Kitchen Manager Position Level Non-ManagementExpo Station:, • Act as the communication link between and among the kitchen line and the front of the house to ensure the coordination and smooth flow of quality products being produced and served to customers., • Control food presentation, quality assurance, and timeliness of food delivery.General Responsibilities:, • Prep, portion, and store food items needed for daily operation, • Ensure you are using proper containers, filling to appropriate fill lines, and following FDIR and FIFO procedures, • Maintain sanitary and organized workstation, • Clean and stock each station following FIFO guidelines, • Ensure all soap and sanitizer buckets are changed minimally every four hours, • Empty any trash containers that need to be emptied, • Wash all necessary dishes, • Skim, polish, filter, dump fryers-follow your restaurants filtering scheduleThe physical demands for this position require the individual to sit, stand, bend, lift up to 30 pounds, and move intermittently during working hours. These physical requirements may be accomplished with or without reasonable accommodations. The duties of this position may change from time to time. Buffalo Wild Wings reserves the right to add or delete duties and responsibilities at the discretion of Buffalo Wild Wings or its managers. This job description is intended to describe the general level of work being performed. It is not intended to be all-inclusive. Requirements: • Ability to follow specific service time and guidelines, • Ability to maintain a high degree of pace and intensity for an extended period of time

We are looking for safe and courteous Class A truck drivers with a minimum of 2 years of tanker experience.We offer competitive pay, good benefits and a stable company that values its employees.Safety is our number one priority, which is why we have such a good safety record.Cool Transports offers n

This position requires an individual who can provide exceptional customer service according to G&M corporate standards and instruction from management.Someone who can multitask and is comfortable working as part of a team to create an overall friend Cashier, Store Manager, Customer Service, Sales, M

This position requires an individual who can provide exceptional customer service according to G&M corporate standards and instruction from management.Someone who can multitask and is comfortable working as part of a team to create an overall friendly, safe, and clean environment for both customers

Provide administrative support to ensure that municipal operations are maintained in an effective, up to date and accurate manner.Take and distribute minutes at meetings.Coordinate repairs to office equipment.Type correspondence, reports and other documents.Provide support to council to ensure that

The position could be based out of 4 different office locations (Orange, Long Beach, Westlake Village or Downtown LA) In this important position, the successful candidate will support Project Managers in the planning, project or task management and supervision of environmental compliance tasks, comp