Plant jobs in Camden, New JerseyCreate job alerts

Job Description Directly responsible to the General Manager and/or a delegate. Must communicate with all plant production personnel. Functionally responsible for the production and quality of material, including it being packed and inspected as per customer requirements. Ensure that a safe working environment is maintained at all times. This will be done by following Company policies and procedures. We believe that every Employee is responsible to act safely and to model good safety practices. DUTIES AND RESPONSIBILITIES The duties and responsibilities of the Production Associate are detailed below, but not limited to the following: • Responsible for safely and quality of effectively operating all machines within the department: presses, saws, punch press, drilling, tapping, deburring machines and any other additional equipment that may be purchased in the future, • Racking, un-racking, and inspection of parts through the anodizing line, • Check the machine condition for any issues and/or mechanical problems prior to starting it, • Follow work orders and produce parts according to specifications, • Ensure material is packed in order of priority according to the pack dates indicated on the WIP Report., • Confirm weights and counts are correct., • Check material for hardness and record the readings in EPICS. If material is not within spec for hardness, it must be red tagged ahead of the pack stage and QA must be notified., • Once an order is complete, ensure the correct tagging colors are used based on work order routing., • Adherence to work order instructions are critical such as the notes section for specific customer requirements, • Pack all orders according to the required pack code so that it reaches its final destination intact., • Responsible for inputting data into EPICS throughout the run and upon completion of production, • Required to check samples periodically according to what is outlined by the quality standards stated on the work order, • Ensure first piece sample is verified by another personnel to ensure it meets specifications., • Verify the material being provided matches with what the work order is asking for to ensure all instructions are being followed, • Look for material defects, before & during packing, such as but not limited to scratches, dents, and distortion to the profile., • Perform dimensional inspection according to the requirements on applicable orders., • Shrink wrap material that is shipped in bulk on skids., • Use tape and banding as required to secure & maintain the integrity of the material on the skids., • Enter required data into our system to create packing tickets and apply tickets to skids., • Be curious and ask questions. Make suggestions for improvement & assist in fixing problems., • Maintain clean and organized work environment., • Comply with all quality related policies, procedures and system requirements. MINIMUM QUALIFICATIONS Education/Experience • Grade 12 education., • Minimum 1 year experience in manufacturing, using variety of machining, packing, and handling material. Technical Skills/Competence • Must have good command of English, written and oral., • Should be familiar with MS Office., • Must be capable of using measuring instruments and able to read blueprints/drawings., • Profit Sharing, • Education Assistance Program, • Social Events, • Safety Shoe and Glasses Allowance, • Internal Growth and Development, • Health and Dental, • Life and AD&D, • Vision, • Critical Illness Insurance, • Long Term Disability

Job Description Overview Circet USA is the leading provider of Network Services in North America, and we're looking for talented professionals to join our team. We specialize in engineering and construction services delivering comprehensive solutions across Inside Plant, Outside Plant, and Wireless networks to meet the evolving infrastructure needs of our customers. With nearly 50 years of industry experience, we work with major telecom service providers, MSOs, cloud service providers, and utilities. At Circet USA, you'll have the opportunity to make an impact by helping to create customized solutions that address our clients' unique challenges. If you’re passionate about innovation and thrive in a dynamic environment, we’d love to hear from you. Circet USA’s benefits package includes the following: • Medical, Dental, and Vision insurance, • Digital Health & Wellness Support, • Critical Illness, Accident, & Hospital Insurance, • Short-term & Long-term disability, • Group term & Voluntary life insurance, • Flexible Spending and Health Savings Accounts, • Paid Time Off & 401K, • Company Discount Website Responsibilities A Drive Test Technician is responsible for executing mobile and stationary RF testing to validate wireless network performance. This role supports engineering teams by collecting field data to optimize coverage, capacity, and quality of service across 5G technologies. This position requires 100% travel. This position will support the Northeast region which consists of the following states: • MN, VT, NE, MA, RI, CT, NY, NJ, PA, DE, MD, DC, VA ESSENTIAL DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned: • Drive Testing: Operate drive test equipment (e.g., TEMS Pocket, X-CAL, QXDM) in vehicles or on foot to collect RF data across designated routes and clusters., • Perform a Speed Test, • Data Collection & Upload: Capture logs for RSRP, SINR, PCI, throughput, and scanner data. Upload results to centralized servers for post-processing and validation., • Properly follow the test files naming conventions., • Reporting: Communicate with Circet and client point of contacts throughout the process and to escalate issues as necessary. Qualifications * • High school diploma or equivalent required; technical certifications preferred., • Familiarity with wireless technologies: LTE, VoLTE, CDMA, 5G, MIMO, Carrier Aggregation strongly preferred., • 1–3 years of experience in RF testing or field technician roles desired., • Experience with DAS, small cells, or CRAN installations is beneficial., • Must have good computer skills., • Must have a valid U.S. driver’s license and clean driving record., • Willingness to travel and work flexible hours, including weekends. Pay Range in the United States: $20/hr - $26/hr based upon geography, skills, and experience. May also be eligible for performance incentive opportunity based on company and individual goals and performance.

Line of Business: Cement & White About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing • Put your education into action in the field to support and participate in assigned project work., • Support the plant operations in achieving production goals while partnering with experienced engineers, managers, and production employees in different departments., • Complete technical projects to gain an understanding of the operations of a quarry or aggregate site., • Learn the mission of the production, maintenance, and quality departments and different job and functions., • Ensures compliance with all health, safety, and environmental regulations, as well as company policies and procedures What Are We Looking For • Current juniors and seniors working toward a degree in Chemical or Industrial Engineering, • Commitment and engagement through a high level of work ethic and utilization of abilities for the best of the company, • Demonstrated openness to change, flexibility, and adaptability, • Excellent communication skills, both written and verbal, • Ability to motivate teams and simultaneously manage several projects, • Strong strategic thinking, problem-solving, and decision making skills Work Environment • Collaborative and inclusive team culture., • Opportunities for professional growth and development., • Exposure to various aspects of the building materials industry. Equal Opportunity Employer - Minority / Female / Veteran / Disabled #Intern

Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented and diverse workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Process Engineer is responsible for the design and implementation of elements of new or improved processes as they are transferred from development to production. Core Responsibilities: • Collaborate with cross functional teams to develop safe, efficient, practical and commercially viable processes to generate a consistent quality API supply fit for its intended use, with essential considerations given to optimizing process yields, turnaround times, and productivity., • Lead process improvements efforts which improve yields and/or lower production costs, enhancing the overall efficiency and cost effectiveness of the Pharmaceutical Materials production processes., • Design and conduct a variety of experiments or plant trials to define process conditions that match or improve plant capabilities to run commercial processes., • Contribute in pilot and validation runs in the manufacturing plant, • Collaborate with Project/Facilities Engineering in capital projects during front-end design (URSs, PFDs, M&E Balances), PHAs, design reviews, commissioning, start-up and operator training, • Lead troubleshooting efforts related to processing and process equipment problems while gathering relevant information and compiling necessary reports., • Write and review Batch Records, SOPs, Process Validation Protocols, and other technical reports, • Collaborate with the EHS group on environmental, health and safety related aspects of new processes and process modifications; performs related emission calculations, • Develop process performance tracking procedures and analyses existing data for optimization potential Qualifications: Required • B.S. in Chemical Engineering or equivalent technical degree required., • Minimum of 3 years manufacturing or process engineering experience in Pharmaceuticals required., • Knowledge of commonly used equipment, technical concepts and procedures within bulk API batch manufacturing., • Advanced knowledge of Microsoft Office Products (Word, Excel and PowerPoint) required., • Team oriented and able to work efficiently in a project driven environment., • Strong verbal and written communication and presentation skills., • Excellent organization skills and ability to prioritize and multi-task., • Knowledge of FDA/cGMP guidelines and practices., • Strong statistical analysis skillset., • Strong Failure Mode and Effect and Root Cause analysis skills. Salary Range: $90,000 - $110,000 annual base salary Our Commitment: • Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies., • Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs., • Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs., • Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don’t meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team. Additional Information: Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice .

Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Production Coordinator is responsible for leading and coordinating daily production activities to ensure safe, efficient, and compliant operations. This role works closely with operations, quality, technical, supply chain, and maintenance teams to resolve process issues, maintain production schedules, and meet quality and EHS expectations. The coordinator also drives process improvements, supports annual shutdown planning, and contributes to continuous improvement initiatives across the production area. This role provides leadership and development opportunities for team members, fostering a culture of safety, accountability, and operational excellence. In addition, this position manages process safety and personnel performance. Core Responsibilities: • Ensure all production equipment is operational, clean, and ready for scheduled processes, with accurate bills of materials, consumables onsite, and supporting documentation (batch records, assays, packaging requests) provided prior to start., • Collaborate with Process Engineering, EHS, QC, QA, Regulatory, and Production to ensure batch records are accurate, approved, issued on time, and that raw materials are sampled, tested, and released before batch start., • Provide guidance and training to Production shifts, update Standard Work Plans, track cycle times and yield, implement process improvements, and lead troubleshooting for equipment and production issues., • Organize and lead investigations of production deviations, EHS events, and documentation errors, managing open production TRs and ensuring batch records close within 7 days., • Monitor facility performance and drive improvements in productivity KPIs while championing Continuous Improvement initiatives, including Kaizen blitzes, 5S, and area audits., • Review, revise, and maintain Production Work Instructions, manufacturing batch records, deviations, and SOPs within the Veranova Quality system; support tech transfers, scale-up, and validation projects as needed., • Represent Production in PHAs/PSSRs, daily L2 SQDCP meetings, and weekly planning meetings; update Production Readiness Reviews and communicate impacts to the business., • Communicate and collaborate with internal and external customers, meet with regulatory agencies during audits, and provide plant tours for visitors. Qualifications: Required • BS in Chemical Engineering, Chemistry or relevant technical degree w/ a minimum of 3 years’ manufacturing, project management, and/or product team experience in the pharmaceutical industry or, • BS degree in a non-technical discipline with a minimum of 7 years’ manufacturing, project management and/or product team experience in the pharmaceutical industry, • Advanced knowledge of Microsoft Office (Word and Excel), • Ability to lead and influence others, • Verbal/Non-verbal communication and technical writing, • Ability to independently apply scientific and/or technical knowledge in the performance of job dutie Special Factors • Able to work with minimal to moderate oversight, • Occasional walking, standing for long periods of time while in labs/plant, reaching, handling, twisting, bending spine at waist when operating equipment, • May need to wear PPE while training or troubleshooting issues in the plant Salary Range : $80,000 - $95,000 annual base salary Our Commitment: • Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies., • Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs., • Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs., • Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don’t meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team. Additional Information: Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice .

Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented and diverse workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Reliability Engineer is responsible for guiding efforts to ensure reliability and maintainability of equipment, processes, utilities, facilities and controls in collaboration with the Maintenance Department. This role will identify and manage asset reliability risks that could adversely affect plant or business operations. Core Responsibilities: • Professionally and systematically defines, designs, develops, monitors, and refines an asset maintenance plan that includes:, • Value-added preventive maintenance tasks for new and existing equipment., • Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems., • Develops and provides input to a risk management plan that will anticipate reliability-related and non-reliability related risks that could adversely impact plant operations., • Participates in the development of criteria for and evaluation of equipment and technical MRO suppliers and technical maintenance service providers., • Develops engineering solutions to repetitive failures and all other problems that adversely affect plant operations. These issues may include capacity, quality, cost or regulatory compliance issues. To fulfill this responsibility, the reliability engineer applies data analysis techniques that could include:, • Reliability modeling and prediction, • Fault tree analysis, • Six Sigma methodology, • Root cause analysis (RCA) and root cause failure analysis (RCFA), • Failure reporting, analysis and corrective action system (FRACAS), • Works with Production to perform analyses of assets including:, • Asset utilization, • Equipment effectiveness, • Remaining useful life, • Other parameters that define operating condition, reliability and costs of assets., • Provides technical support to maintenance personnel., • Participates in the development of design and installation specifications along with commissioning plans and participates in the final commissioning of new installations., • Applies value analysis to repair/replace, repair/design and make/buy decisions., • Carry out any other duties which are within the employee’s skills and abilities whenever reasonably instructed. Qualifications: Required • BS/MS in Mechanical Engineering, Reliability Engineering, or equivalent degree., • Minimum of 5 years of maintenance and reliability, production management, engineering or operations experience., • Experience with and a thorough understanding of technical concepts, practices and procedures in bulk pharmaceutical manufacturing, and related support systems., • Strong knowledge of preventive maintenance programs and the tools associated with failure detection (i.e. vibration analysis, oil monitoring and thermography) as well as the software associated with them., • Working knowledge of Computerized Maintenance Management Systems., • Experience working with Microsoft Office (Outlook, Word, Excel, Project, and Visio), • Ability to read and understand repair manuals, specifications, drawings, and schematic diagrams., • Excellent communication and interpersonal skills., • Excellent organizational skills and detail oriented., • Good technical writing skills, • Must be able to work independently with minimal supervision., • Lean/Six Sigma experience. Salary Range : $90,000 - $110,000 annual base salary Our Commitment: • Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies., • Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs., • Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs., • Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don’t meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team. Additional Information: Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice .

Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Vice President & General Manager will lead operations for Veranova’s West Deptford site, a high-throughput API manufacturing facility specializing in small molecules and controlled substances. This role is accountable for driving process excellence, ensuring compliance with DEA and FDA regulations, and delivering operational and financial performance. The GM will foster a culture of safety, quality, and continuous improvement while collaborating with Veranova’s Leadership Team to leverage growth opportunities across multiple sites internationally. Core Responsibilities: • Strategic Leadership:, • Able to define a vision for a site of approximately 200 staff members, including the development of a 3 to 5 year operating plan, • Prior experience managing responsibility of the P&L and balance sheet for a manufacturing site., • Deliver annual revenue, profit, EBITDA, and cash targets through effective P&L management., • Execute capital projects on average of +$10M to ensure facilities, equipment, and systems meet production demand and compliance requirements., • Develop and execute site master plan which includes building talent capabilities that results in the site meeting branded large pharma industry standards to facilitate new business., • Regulatory & Compliance:, • Ensure strict adherence to cGMP, FDA, and DEA regulations for controlled substances., • Maintain FDA audit readiness and compliance with OSHA, EPA, DEA and other regulatory agencies., • Process Excellence & Operational Performance:, • Drive process improvement initiatives, lean manufacturing, and digital transformation to optimize throughput and reduce costs., • Assess site operations and drive execution of cost reduction initiatives to improve productivity and profitability of products, • Implement best practices for manufacturing, • Deep understanding in Process Safety Management, Environmental understanding, including wastewater treatment plant operations and security programs., • Oversee ERP and compliance systems (including D365) for operational efficiency., • Commercial & Customer Focus:, • Partner with Commercial teams to define and execute strategies for revenue growth and customer satisfaction., • Ensure timely delivery of products in compliance with regulatory requirements., • People Leadership:, • Recruit, develop, and retain high-caliber talent through succession planning and performance management., • Demonstrates deep understanding on cultural transformation, • Foster a culture of engagement, accountability, and continuous improvement., • Business Development:, • Enable the site to deliver late -phase/commercial CDMO programs that include the acquisition of new customers, tech transfer and scale up production., • Participate in strategic initiatives including market expansion, technology alliances, and evaluation of new products., • Support acquisition and rationalization activities as needed. Qualifications: Education: • Bachelor’s degree in Chemical Engineering, Chemistry, Pharmaceutical Sciences, or related field (advanced degree preferred). Experience: • 15+ years in API small molecules pharmaceutical manufacturing leadership roles, with proven expertise in cGMP, FDA, and DEA compliance for APIs and controlled substances., • Proven experience in generics manufacturing with knowledge and capabilities to meet big pharma branded business., • Demonstrated success in operational turnarounds, quality remediations, or start-up of manufacturing facilities., • Strong background in process optimization and continuous improvement methodologies. Skills: • Exceptional leadership, communication, and change management skills., • Detail oriented, advance analytical capabilities and high learning agility, • Ability to manage complex operations and deliver results in a dynamic environment., • Understanding transactional process improvements, • Understand how to develop and implement operating mechanism and meeting structure to manage operations at the site, including the definition and implementation of KPIs and tier meetings. Salary Range: $200,000 - $300,000 annual base salary Our Commitment: • Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies., • Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs., • Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs., • Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you do not meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team. Additional Information: Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice .

Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: This role supports daily production operations by troubleshooting and maintaining DeltaV DCS and Allen Bradley PLC systems, assisting with instrumentation and electrical needs, and monitoring automation system health to identify improvement opportunities. It also executes capital projects, including automation and instrumentation design for large initiatives and full ownership of smaller automation-focused projects. Additional responsibilities include supporting equipment validation, maintaining control system documentation, advancing equipment safety, and managing the OT network. Core Responsibilities: • Oversee automation and control system design activities for assigned projects., • Develop controls sections of User Requirement Documents (URDs)., • Analyze safety instrumented systems and design safety-rated interlock systems., • Prepare Requests for Proposal (RFPs) for controls-related project work., • Manage external contractors to ensure on-time, on-budget project delivery., • Own all plant-level control architectures, programming, and documentation., • Serve as the site expert for control systems to ensure effective in-house troubleshooting and updates., • Participate in ongoing process improvement initiatives., • Maintain and update all automation and control system hardware and software documentation., • Maintain control system backups, recovery systems, and procedures., • Apply cGMP requirements to all job functions and ensure compliance in all documentation., • Support audit readiness and participate in FDA, regulatory, and customer audits as required., • Perform other duties as assigned based on skills and business needs. Qualifications: Required • Bachelor’s degree in Electrical Engineering, Chemical Engineering, or a related field with at least 2 years of relevant experience, or 7+ years of practical experience in lieu of a Bachelor's degree., • Experience in process control and automation., • Proficiency in Microsoft Office (Outlook, Word, Excel)., • Ability to read and interpret repair manuals, specifications, drawings, and schematic diagrams., • Excellent communication and interpersonal skills., • Strong organizational skills and attention to detail., • Good technical writing skills. Preferred • Experience with technical concepts, practices, and procedures in bulk pharmaceutical or chemical manufacturing., • Experience in the operation, maintenance, troubleshooting, and programming of DeltaV Distributed Control Systems and Allen Bradley PLC systems. Salary Range : $80,000 - $95,000 annual base salary Our Commitment: • Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies., • Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs., • Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs., • Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don’t meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team. Additional Information: Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice .

Students develop oral communications skills, obtain an understanding of nuclear radiation, and gain knowledge of the safe operation of a complex Naval nuclear power plant. Nuclear-trained MMs perform duties in nuclear propulsion plants operating reactor control, propulsion and power generation syste

Responsibilities: Develop, implement, and continuously improve asset maintenance and reliability strategies Identify and mitigate asset reliability risks impacting plant operations Lead failure analysis, RCA/RCFA, and reliability modeling initiatives Support maintenance and production teams with tec

Job DescriptionBenefits/Perks • Competitive Pay, • Career Advancement Job SummaryWe’re looking for a hardworking Instrument and Control Maintenance Technician to join our team! Responsibilities include installation, commissioning, testing, calibration, and maintenance of electronic instrumentation (Flow, Level, Pressure, and Temperature). The location is an industrial outdoor oil sludge recycling facility. You’ll make sure our Instruments are operating correctly, regularly inspect our instrument for any damage, and conduct routine maintenance on our instruments and control panels. The ideal person for this job is a reliable team player and a problem solver who has some prior maintenance experience. If you’re looking for a job at a fast-growing company that really values its employees, reach out to us today! Responsibilities & Skills • General experience with programmable logic controllers (PLC), automatic control valves, distributed control systems (DCS)., • General experience with Variable Frequency Drive (VFD) configuration, • General Experience in Electric Instrumentation such as Coriolis meters, Mag flow meters, RTD thermocouples, DP flow meters, Pressure, Radar level transmitters, pH and Probes., • Experience with Electrical schematics, Process flow diagrams, P&ID documents, Equipment and instrumentation Specifications Sheets and Standard Plant Operating procedures, and Industrial Safety standards., • General Experience with Electrical control panel wiring, relays, motor control starters and Circuit Breakers., • General Electrical Technical Support., • Some mechanical experience is desired., • Conduct routine maintenance on equipment and systems such as HVAC units, plumbing fixtures, and electrical wiring to make sure they’re operating efficiently and make any needed repairs, • Keep a record of completed repairs and when the equipment was last serviced, • Develop and execute preventative maintenance measures to keep our equipment operating efficiently and prevent any safety risks, • Handle additional maintenance tasks as neededQualifications, • High school diploma/GED or equivalent, • 2 year technical AA degree or equivalent experience, • At least 5 years of industrial instrument and control maintenance experience, • Some knowledge of (HVAC), Chiller, Compressor Maintenance, and plumbing systems desired, • Electrical Control systems, • Electrical Panel experience, • Steam Boiler Maintenance, • IT support skills, • Advanced understanding of maintenance equipment, procedures, and techniques, • Available to be on call and respond to maintenance requests on nights and weekends, • Excellent work ethic, communication skills, time management skills, and attention to detail, • 40 hour Haz Mat Training will be provided

Life changing therapies. Global impact. Bridge to thousands of biopharma companies and their patients. We are PCI. Our investment is in People who make an impact, drive progress and create a better tomorrow. Our strategy includes building teams across our global network to pioneer and shape the future of PCI. Summary Of Objective The main responsibilities of the Sr. Director – NPI Engineering is focused on the planning and execution of projects from estimating to launch: • Manage and communicate the site portfolio of NPI projects, ensuring projects are managed to intended capital and resource cost and scope, • Provide resources and oversight to project estimating activities to develop a trusted project resource plan, • Own the resource planning process for the NPI engineering team, coordinated with other functional leaders (quality, validation, facilities, etc.) providing resources to project teams., • Provide support to project teams, taking on risk mitigations, issue resolution, and escalations to ensure on-time launches at target quality and unit cost, • Leading change and continuous improvement activities for the NPI process, • Oversees NPI engineering project management., • Supervises a staff of engineers and/or engineering technicians and provides guidance, leadership, and mentorship in areas of engineering, project management, and professional development., • Prioritizes and guides engineering and project management resources in the design of new or improvement/expansion of existing assembly and packaging processes to deliver FDA compliant production capacity on time and within budget according to business plan., • Plan and manage capital plan for facility and production equipment related spending to assure production can meet new product development, equipment commissioning, product launch, and contract packaging requirements., • Works with global engineering to guide the specification and selection of manufacturing equipment/utility equipment and awards architectural and engineering contracts based on competitive bids and analysis developed by site Project Managers., • Adapts NPI engineering organization to meet changing product portfolio and customer demands through appropriate hiring and organizational structuring., • Communicates significant equipment or process issues to site leadership., • Measure and analyze performance metrics of the NPI project portfolio, and undertake escalations to address time, cost and scope issues., • Ensure effective communication, planning and coordination between other functions, • Prepares equipment/engineering estimates for potential projects (to be submitted to sales)., • Analyzes sales requests to determine equipment, tooling, or delivery systems needed., • Oversee the Engineering review of all components for new jobs (size, capability of equipment, bar codes)., • Conducts and/or participates in customer meetings and attends occasional off-site meetings., • Participates in internal review meetings to plan new jobs with plant Operations, Maintenance, Quality, Purchasing and Process Engineering., • Responsible for the administration, implementation, and project management of assigned projects, including using company-wide standardized methodology., • Coordination of outside design, integration, and equipment manufacturing services., • Manages the site facilities and utilities to accommodate new equipment and meet all regulatory requirements., • This position may require overtime and/or weekend work. Knowledge of and adherence to all PCI, cGMP, and GCP policies, procedures, rules. Required • Bachelor's Degree in Engineering or related field, • 7-10 years experience in a related industry, • College Level Mathematical Skills, • Program and Project management, • Intermediate Computer Skills: Ability to perform more complex computer tasks and has knowledge of various computer programs., • Full Professional Proficiency: Ability to speak, read, and write fluently and accurately on all levels pertinent to professional needs., • High Reasoning: Ability to solve practical problems and deal with a variety of concrete variables in situations where there is only limited standardization. Ability to interpret a variety of instructions that may be provided in various forms., • Ability to adapt to changing work environments., • Ability to effectively present information to various people as the job requires., • Ability to work independently and/or as part of a team., • Ability to display excellent time management skills., • Lean/Six Sigma training Equal Employment Opportunity (EEO) Statement PCI Pharma Services is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. At PCI, Equity and Inclusion are at the core of our company’s purpose: Together, delivering life-changing therapies. We are committed to cultivating an inclusive workplace by holding ourselves accountable to the highest standards of understanding, fairness, respect, and equal opportunity – at every level. We envision a PCI community where everyone can belong and grow, and we strive to bring this vision to reality by continuously and intentionally assessing our people practices, policies and programs, marketing approach, and workplace culture.

Job Description 5 plus years direct working experience within the trade or craft position required. Supervisory experience with a union labor force preferred Experience in a healthcare environment preferred Directly assists the Director and Plant Manager in the implementation of programs and projects established by the Department of Facilities Services. Ensures that all work activities are performed according to specifications, regulations, and standards. Ensures that all the physical as well as the human resources are maintained cost effectively and of a high quality within that region. • Provides expertise and management leadership for staff, technical plant operations and troubleshooting of hospital systems which include Heating, Ventilation, Air Conditioning and Refrigeration (HVACR) as well as plumbing systems, vessels, piping including piped delivery of gases, liquids and steam for process and environmental systems., • Provides leadership/technical direction and resource allocation for plant operations to ensure regulatory compliance and deliver system reliability within a pre-established budget., • Manages the development and execution of assigned projects through the Craft/Projects Shop staff and trade contractors., • Leads real time data collection and analysis to provide direction to plant operations staff for activities associated with system testing, trouble shooting, discovery, maintenance/repairs, restoration, plant reconfiguration and hazardous energy control. Responsible to execute disaster recovery and contingency plans during planned and unplanned work., • Develops, engages and supervises staff by using continuous improvement technics to promote the well-being of employees with performance evaluations, technical/compliance training and coaching., • Participates with training and safety programs as established internally as well as campus wide and make those programs available to his/her employees. Responsible for staff rewards, recognition and performance improvement plans, • Establishes and maintains a preventive maintenance as well as routine maintenance schedules within the budget guidelines established for the region., • Supervises all duties and tasks necessary for the installation, repair, maintenance and alterations in his/her area of responsibility., • Provides written estimates to facilities manager as required for maintenance related work., • Follows working rules as established by the Department as well as the University and administers those rules to his/her employees., • Adjusts and reassigns employees as work load increases or decreases in order to insure a cost-effective operation., • Makes recommendations to facilities managers as to how to improve methods of operations and cost reduction ideas., • Conducts performance evaluations as required and submit to the facilities manager annually., • Maintains all work orders, for employees directly assigned to them., • Maintains all personnel records in a neat and orderly method., • Participates in job interviewing process and make formal recommendations to facilities manager., • Handles all local 830 grievances at the first step level and provide written documentation to facilities manager., • Ensures compliance with maintenance regulations, • Assists with equipment start-up, quality control verification and coordination with required staff, • Performs other related duties as assigned by the facilities manager High School Diploma or GED required. Company DescriptionNationally ranked, Jefferson, which is principally located in the greater Philadelphia region, Lehigh Valley and Northeastern Pennsylvania and southern New Jersey, is reimagining health care and higher education to create unparalleled value. Jefferson is more than 65,000 people strong, dedicated to providing the highest-quality, compassionate clinical care for patients; making our communities healthier and stronger; preparing tomorrow's professional leaders for 21st-century careers; and creating new knowledge through basic/programmatic, clinical and applied research. Thomas Jefferson University, home of Sidney Kimmel Medical College, Jefferson College of Nursing, and the Kanbar College of Design, Engineering and Commerce, dates back to 1824 and today comprises 10 colleges and three schools offering 200+ undergraduate and graduate programs to more than 8,300 students. Jefferson Health, nationally ranked as one of the top 15 not-for-profit health care systems in the country and the largest provider in the Philadelphia and Lehigh Valley areas, serves patients through millions of encounters each year at 32 hospitals campuses and more than 700 outpatient and urgent care locations throughout the region. Jefferson Health Plans is a not-for-profit managed health care organization providing a broad range of health coverage options in Pennsylvania and New Jersey for more than 35 years. Jefferson is committed to providing equal educational and employment opportunities for all persons without regard to age, race, color, religion, creed, sexual orientation, gender, gender identity, marital status, pregnancy, national origin, ancestry, citizenship, military status, veteran status, handicap or disability or any other protected group or status.Nationally ranked, Jefferson, which is principally located in the greater Philadelphia region, Lehigh Valley and Northeastern Pennsylvania and southern New Jersey, is reimagining health care and higher education to create unparalleled value. Jefferson is more than 65,000 people strong, dedicated to providing the highest-quality, compassionate clinical care for patients; making our communities healthier and stronger; preparing tomorrow's professional leaders for 21st-century careers; and creating new knowledge through basic/programmatic, clinical and applied research. Thomas Jefferson University, home of Sidney Kimmel Medical College, Jefferson College of Nursing, and the Kanbar College of Design, Engineering and Commerce, dates back to 1824 and today comprises 10 colleges and three schools offering 200+ undergraduate and graduate programs to more than 8,300 students. Jefferson Health, nationally ranked as one of the top 15 not-for-profit health care systems in the country and the largest provider in the Philadelphia and Lehigh Valley areas, serves patients through millions of encounters each year at 32 hospitals campuses and more than 700 outpatient and urgent care locations throughout the region. Jefferson Health Plans is a not-for-profit managed health care organization providing a broad range of health coverage options in Pennsylvania and New Jersey for more than 35 years. \r\n\r\nJefferson is committed to providing equal educational and employment opportunities for all persons without regard to age, race, color, religion, creed, sexual orientation, gender, gender identity, marital status, pregnancy, national origin, ancestry, citizenship, military status, veteran status, handicap or disability or any other protected group or status.

Job Description As this position requires the most face to face time with our customers, Route Drivers are required to maintain themselves professionally, both in appearance and actions, at all times while performing company business. Route Drivers are responsible for: • Loading/Unloading their truck with customer goods, • Safe operation of the company truck at all times, • Properly utilizing laundry management system to ensure truck contents are documented at all times, • Effective communication with customers, staff, and management, • Timely delivery of all goods, both to the customer and also to the plant, • Maintaining required licensure and certification Route Drivers must have at least a year of experience operating a 26' box truck or larger. Drivers are also required to have a valid driver's license and medical DOT card. Motor Vehicle points in excess of two (2) could impact eligibility for the position. Clean Green Textile Services dba Single Source Plus offers a competitive compensation package including 401K with employer matching, health/life/dental/vision benefits, paid vacation, sick days, etc.

Job Description Catelli Brothers Family of Foods, a family-owned company established over 75 years and specialized in the processing and marketing of veal, beef, and lamb products, is looking for a Refrigeration Technician. Our Commitment: At Catelli Brothers Family of Foods, we are committed to fostering a dynamic, inclusive, and growth-oriented work environment. We empower our employees with challenging opportunities, ongoing professional development, and the chance to make a meaningful impact on the success of our North American operations. The Refrigeration Technician position maintains the daily operation of the facility refrigeration systems and performs the mechanical and electrical maintenance activities required to operate the system safely and at maximum efficiency. Technician will assist in other Maintenance Team activities as needed. This position will be hiring for full-time and part-time. This role reports to the Director of Maintenance. Duties: • Reviews refrigeration equipment manuals and develops preventive maintenance programs to ensure that refrigeration equipment performance and reliability remains at high levels., • Identifies critical parts required to maintain equipment, determines minimum on hand requirements and ensures that parts are available to minimize out-of-service time., • Audits existing preventive maintenance programs on an on-going basis and makes changes to improve reliability and reduce maintenance costs., • Communicates effectively to other Maintenance Associates about refrigeration systems repairs that have been performed or are scheduled to be performed. Keeps Management informed on the status and progress of repairs performed on the refrigeration systems and their effect on area temperatures., • Ensures that proper sanitation is performed after maintenance has been performed., • Performs cleaning of the refrigeration cooling unit coils., • Audits the refrigeration compressor room daily and ensures that tools and safety equipment are stored properly., • Ensures that chemicals used by the refrigeration system are labeled properly and stored according to the manufacturer’s recommendations., • Ensures that waste oil is collected and stored properly according to federal, state and local requirements., • Meets with Management to discuss and resolve problems relating to production room, warehouse and freezer temperatures., • Meets daily with tool crib to discuss refrigeration system work order status and provide feedback on work status and backlog., • Meets with Maintenance Buyer as needed to order parts and clarify purchase requisitions., • Meet with contractors as needed to discuss refrigeration system projects and system maintenance requirements., • Ensures that the refrigeration system operates at the highest efficiency possible., • Ensures that all associates under their supervision follow all corporate safety procedures and comply with Personal Protection Equipment (PPE) requirements., • Enforces safety rules and encourages safety practices., • Promptly reports all unsafe conditions and takes corrective action., • Performs other task and projects as directed Qualifications: • Requires advanced technical and working knowledge in operating, isolating for repairs, and maintaining complex refrigeration systems and equipment., • Must be very knowledgeable in responding to refrigeration systems emergencies and isolating sub-systems under emergency situations., • Must have sound understanding of techniques for work prioritization and scheduling., • Knowledgeable in preventative maintenance techniques pertaining to refrigeration systems and able to develop preventive maintenance programs from vendor manuals., • Working knowledge of personal computer spreadsheet software programs., • Working knowledge of electrical power distribution, instrumentation and Programmable controller (PLC) programming., • Must be able to troubleshoot complex electrical systems., • Must be knowledgeable in refrigeration system lubrication requirements, and cooling tower water treatment methods., • Must have working knowledge of OSHA and GMP requirements as they pertain to refrigeration maintenance activities. Must be very knowledgeable about EPA regulations pertaining to the release of refrigerant., • Able to work flexible hours and overtime as required by workload., • Must be willing and able to contribute to and implement department programs, procedures and systems. Will work in typical maintenance conditions. Will frequently enter various refrigerated areas of the plant to perform maintenance activities. Frequent stay in the refrigerated areas may be for extended periods of time. Education / Training: • High school diploma or GED required., • Basic Reading, Writing and Math skills. Related Experience/Requirements: • A Minimum 3- 5 yrs experience in meat production Physical Requirements: • Must be able to perform the following physical activities: Job requires workers to lift up to 60 lbs. must be able to: step, climb, balance, squat, kneel, bend and reach above shoulders as needed., • Work in a cold refrigerated environment Company DescriptionAt Catelli Brothers Family of Foods, we are committed to fostering a dynamic, inclusive, and growth-oriented work environment. We empower our employees with challenging opportunities, ongoing professional development, and the chance to make a meaningful impact on the success of our North American operations. The operating philosophy is simple: by carefully controlling and integrating each stage in the production process the company is able to continually offer consumers safe, nutritious and tasty quality products. That process includes making the finest quality feed, responsible farming of superior calves and providing customized cuts of veal and American and imported lamb for the food service and consumer retail industries. The Catelli Brothers state-of-the-art processing facility in New Jersey–along with its sister company, Montpak International, in Canada–distributes veal and lamb and other specialty meat products throughout the U.S., Canada, Mexico, and beyond.At Catelli Brothers Family of Foods, we are committed to fostering a dynamic, inclusive, and growth-oriented work environment. We empower our employees with challenging opportunities, ongoing professional development, and the chance to make a meaningful impact on the success of our North American operations.\r\n\r\nThe operating philosophy is simple: by carefully controlling and integrating each stage in the production process the company is able to continually offer consumers safe, nutritious and tasty quality products. That process includes making the finest quality feed, responsible farming of superior calves and providing customized cuts of veal and American and imported lamb for the food service and consumer retail industries.\r\n\r\nThe Catelli Brothers state-of-the-art processing facility in New Jersey–along with its sister company, Montpak International, in Canada–distributes veal and lamb and other specialty meat products throughout the U.S., Canada, Mexico, and beyond.

Job DescriptionDescription: Join a company that keeps things moving — literally. At CCT, we create pressure-sensitive tapes and adhesive solutions that power innovation across industries. We’re a hands-on team that values speed, quality, and problem-solving. If you like fixing things, figuring out how they work, and keeping a plant running like a well-oiled machine, you’ll fit right in here. The Role We’re looking for a Maintenance Technician for our overnight shift. You’ll be the go-to person keeping our production equipment up and running. From troubleshooting electrical and mechanical systems to preventive maintenance, your work keeps our lines moving and our products top quality. What You’ll Do • Diagnose, repair, and maintain machinery (electrical, mechanical, pneumatic, hydraulic)., • Work with PLCs, controls, and sensors — you’ll know your way around ladder logic and schematics., • Perform preventive maintenance and make recommendations for equipment upgrades or reliability improvements., • Install new machinery, wiring, or components as needed., • Respond to maintenance requests and occasional emergency calls., • Keep the work area safe, organized, and compliant with company and safety standards. Requirements: What You Bring • Hands-on experience as a Maintenance Technician in a manufacturing setting., • Strong troubleshooting skills with AC/DC circuits, three-phase wiring, relays, and PLCs., • Familiarity with Allen-Bradley (RSLogix 500/5000, FactoryTalk) — Omron experience a plus., • Ability to read electrical schematics and P&ID diagrams., • Organized, detail-oriented, and self-sufficient — especially on nights., • Able to lift 75 lbs and work comfortably in a production environment., • Competitive pay and shift differential for overnights., • Reliable, steady work in a clean, safety-focused facility., • Health, dental, vision, and 401(k) benefits., • Team that values collaboration and craftsmanship — not just “getting it done.”

Job Description Heidelberg Materials is seeking a Maintenance Technician at our Camden Slag Plant in Camden, NJ. This position is a rotating 7am-7pm and 7pm-7am schedule. Two-week period on days and then two-week period on nights with days off in between. If you have previous heavy industrial maintenance experience, Heidelberg Materials wants to hear from you! About the Company: Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. We're dedicated to our goal to create sustainable value with industry-leading products and solutions to satisfy the construction needs of our customers around the world. We are Building a Better Future for our people, our customers, our communities and our shareholders. What You'll Get To Do As a Maintenance Techician you will perform preventative and corrective mechanical and electrical maintenance activities on plant equipment. You will execute and provide accurate feedback on work orders and inspection sheets. Earn $28 per hour plus regular overtime! Requirements: • High school diploma or equivalent (GED), • Previous heavy industrial maintenance experience required, • Knowledge of different types of bearing (application) in rotating equipment is essential, • Ability to perform all technical aspects of the job by using all tools or systems required to perform the work. (MIG and ARN welders, cutting torch, plasma cutter, micrometers and calipers; Hoisting and rigging equipment, hand tools, hydraulic jacks), • Ability to execute periodic calibration on instrumentation, including scales, probes, feeders, etc., • Ability to perform required information for spare parts purchasing and perform physical inventory as needed. Ensure any special tools and equipment required for a maintenance activity are returned in a timely fashion and in good condition., • Ability to read, write, and comprehend simple correspondence, • Ability to work different shifts, holidays and/or overtime as required, • Competitive Pay – Earn $28 per hour plus regular overtime, • 401k with employer match, • Year-Round Health, Dental & Vision Insurance, • Life Insurance, • Vacation & Paid Holidays If this sounds like an opportunity you would be interested in, please visit our application page by clicking here. Heidelberg Materials is a drug-free workplace. All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. Powered by JazzHR DzA0OJGlVW

Job DescriptionSummary The Maintenance Supervisor supports maintenance methodologies to increase people technical skills, work towards loss elimination, tool capability in terms of improving factory efficiency and reliability, increase asset utilization, reduce costs and promote adherence to Quality, Food Safety, Plant Safety & Environmental standards. Responsibilities • Lead the maintenance of equipment per manufacturers' and internal specifications by ensuring the completion of PM's, initiating work orders, and integrating into the maintenance team during rebuilds and supplementary repairs., • Provide guidance to troubleshoot PLC and automated equipment, • Use computer maintenance management system to assign work orders, run reports and ensure resources are allocated effectively, • Manage the preventive maintenance program for the shifts ensuring assignments are properly completed, audited and continuous improvement processes are implemented, • Assign Technicians to jobs in order to efficiently meet maintenance demands and minimize downtime, • Work with Maintenance staff on various repairs as needed, • Provide leadership (supervision, guidance, coaching, training and technical support) to maintenance team members. conduct performance reviews, reinforce performance expectations, and issue progressive disciplinary actions as needed, • Participation in pre-shift meetings, team assignments and audits, • Participate in planning staffing levels, assist with hiring process and onboard new employees, • All other duties and projects as assigned, • Follow safety procedures and Good Manufacturing Practices Requirements, • 5 – 7 years of maintenance experience in a food manufacturing environment, • Bachelor’s degree preferred, or an equivalent level of education and experience, • Knowledge of employee safety, food safety and quality programs (HAACP, SQF), • Strong analytical and problem-solving skills, • Excellent interpersonal skills and a collaborative management style to create an engaged, motivated and high performing team, • Excellent communication skills both verbal and written, • Competency with Microsoft office applications and ERP systems. Able to proficiently use Microsoft systems to communicate data in a clear and effective manner

Job Description This position supports the Maintenance Team and production facility. The Maintenance Building & Facilities Technician performs general maintenance of facilities at the plant. This is a full-time position with daytime hours covering the duration of the production day, primarily Monday through Friday, including early and late hours as needed. Weekend work is required as needed. This candidate must be able to work in a dynamic setting, communicate effectively with team members, perform multiple duties, and engage in new opportunities each day. Essential Job and Duties • Perform general maintenance as it pertains to the building facilities and surrounding areas, • Complete assigned work order request repairs, • Provide continuous upkeep of the facility, including the façade, roof inspection, interior ceilings and lighting, etc, • Adherence to Good Manufacturing Practices (GMPs), • Follow Safe Quality Foods protocols, • Assist in maintaining a clean and safe work environment Requirements Skills, Expectations and Education/Training • Strong communication skills required, especially verbal communication between operators and supervisors, • Strong attention to detail, • Must be a self-starter and self-motivated, • Must be able to manage changing priorities associated with a fast-paced, team environment, • Ability to multi-task, • Experience in a manufacturing facility preferred but not required, • Must be able to lift 50 pounds Benefits Benefits and Compensation • Weekly pay with direct deposit, • Health insurance, • Various supplemental insurance policies available after 90-day introductory period, • Life insurance available after completion of 90-day introductory period, • 401-K retirement plan available after one year of employment, • Option to participate in uniform program

Job Description The maintenance department is responsible for ensuring all machines are working safely and properly at all times. Responsibilities include, but are not limited to: -PM'ing all machines regularly -Blowing down plant and machines to ensure cleanliness -Responding to staff complaints regarding improper operation of machines in a timely manner -Scheduling repairs needed to prevent production downtime -Assist with machine install and removal *Black Seal Boiler License a plus!!!!! Clean Green Textile Services dba Single Source Plus offers a competitive compensation package including 401K with employer matching, paid vacation, sick days, etc.

Job DescriptionHoltec International, a turnkey supplier of technologies for the nuclear and sustainable energy industries, is seeking to add a structural engineer/analyst to its Applied Mechanics Group with opportunities to contribute to Holtec’s first of a kind small modular reactor (SMR) design. Come join a growing multidisciplinary team of engineers designing the next generation nuclear power plant. The engineer would be called upon to analyze metallic, reinforced concrete, steel-concrete composite and soil-subgrade supported structures. The analyses will support engineering requirements, leading to the licensing and construction of SMR-300 plants across the globe. The engineer will use and learn various methods and software to perform the analyses. SPECIFIC AREAS OF RESPONSIBILITY • Execute and document analyses for a variety of structures, systems and components (SSCs), • Review available concept designs based on an ambiguous set of requirements, then develop them into mature designs by critical thinking, literature research, interacting with members from other disciplines and vendors, and any analyses as permitted by project milestones, • Support the preparation of design deliverables, presentations, and communicate design progress in stakeholder meetings, • Static and dynamic finite element analyses (FEA) using ANSYS, LS-DYNA and STAAD.Pro, • Drop and impact (e.g., missile and aircraft) analyses and target response development using LS-DYNA, • Simulation of the seismic response of freestanding structures in air or submerged in water, • Static and dynamic analyses of large reinforced concrete or steel-concrete composite structures, • Soil-structure interaction (SSI) and fluid-structure interaction (FSI) analyses, • Must be a U.S. Citizen, • Applicant must possess a BS in Mechanical/Civil/Structural Engineering with a minimum of 4 years of experience. MS will count for 2 years of experience and Ph.D. will count for 4 years of experience (experience from MS and Ph.D. cannot be combined), • Familiarity with industry standards and design codes such as ASCE, ACI, ASME and AISC, • Must possess excellent credentials in principles of solid mechanics, • Industrial experience in the latest stress analysis codes such as ANSYS, LS-DYNA and STAAD.Pro, • Prior nuclear industry experience including interactions with NRC or other regulatory authorities, • Experience in seismic and stress analysis of pressure vessels and rotating equipment Holtec International offers a competitive benefits package to eligible associates, which includes: • Medical, dental, and vision insurance, • 401(k) retirement plan with company match, • Paid time off and 11 Paid Holidays, • Company-paid life and AD&D insurance, • Employee Assistance Program, • Wellness resources and voluntary benefits, • Training and educational assistance As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Powered by JazzHR K2sDJ6OMcF

Job Description Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focuses on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: This role supports daily production operations by troubleshooting and maintaining DeltaV DCS and Allen Bradley PLC systems, assisting with instrumentation and electrical needs, and monitoring automation system health to identify improvement opportunities. It also executes capital projects, including automation and instrumentation design for large initiatives and full ownership of smaller automation-focused projects. Additional responsibilities include supporting equipment validation, maintaining control system documentation, advancing equipment safety, and managing the OT network. Core Responsibilities: • Oversee automation and control system design activities for assigned projects., • Develop controls sections of User Requirement Documents (URDs)., • Analyze safety instrumented systems and design safety-rated interlock systems., • Prepare Requests for Proposal (RFPs) for controls-related project work., • Manage external contractors to ensure on-time, on-budget project delivery., • Own all plant-level control architectures, programming, and documentation., • Serve as the site expert for control systems to ensure effective in-house troubleshooting and updates., • Participate in ongoing process improvement initiatives., • Maintain and update all automation and control system hardware and software documentation., • Maintain control system backups, recovery systems, and procedures., • Apply cGMP requirements to all job functions and ensure compliance in all documentation., • Support audit readiness and participate in FDA, regulatory, and customer audits as required. Required • Bachelor’s degree in Electrical Engineering, Chemical Engineering, or a related field with at least 2 years of relevant experience, or 7+ years of practical experience in lieu of a Bachelor's degree., • Experience in process control and automation., • Proficiency in Microsoft Office (Outlook, Word, Excel)., • Ability to read and interpret repair manuals, specifications, drawings, and schematic diagrams., • Excellent communication and interpersonal skills., • Strong organizational skills and attention to detail., • Experience with technical concepts, practices, and procedures in bulk pharmaceutical or chemical manufacturing. Our Commitment: • Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies., • Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs., • Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs. Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice. #LI-Onsite

Job Description Production supervisors are in place to oversee the efficient flow of work through the plant. Responsibilities include, but are not limited to: -Managing production employees hours, production numbers, and training while ensuring handbook compliance -Ensure proper training, and retraining when necessary, of employees to maximize plant production. -Effectively resolve conflict within departments to create and promote teamwork -Maintain positive and professional relationships with all colleagues and subordinates -Communicating effectively with staff, other management, and customers -Maintain organization of work while ensuring departments are kept tidy -Coordinating and adjusting work flow to ensure customer needs are met -Report safety concerns, machine issues, and possible OSHA violations to both maintenance team and Operations Manager -Properly utilizing laundry management system to ensure proper billing of customer goods -Properly utilizing payroll system to track and manage hours and scheduling needs -Properly executing inventory requests from customers -Assist in the completion of duties for other department supervisors when unavailable, absent, or on vacation Bilingual a plus, but not required. (English and Spanish) Fridays & Saturdays Off Clean Green Textile Services dba Single Source Plus offers a competitive compensation package including 401K with employer matching, health/life/dental/vision benefits, paid vacation, sick days, etc.

Job Description Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Production Technician will manufacture of bulk API pharmaceuticals in accordance with customer and internal specifications. Core Responsibilities: • Complete batch records in accordance with FDA and Current Good Manufacturing Practices (cGMP) guidelines, • Provide process support and troubleshooting necessary to meet all customer requirements, • Maintain the facility in excellent FDA/cGMP posture ▪ Responsible for safety equipment and active participation in safety program and hazard analysis. Wears appropriate PPE for task., • Ensure that waste is appropriately characterized, labelled, stored and disposed in compliance with all Company, state and federal regulations. Works collaboratively with Environmental, Health & Safety, as appropriate., • Assure all production/support equipment is in proper operating condition and that all production equipment is appropriately labelled with a current status tag. Works collaboratively with Maintenance, as appropriate., • Ensure the security and safe handling of all controlled substances at all times. Strictly adheres to all Company and DEA regulations., • Ensure a level of housekeeping appropriate for a pharmaceutical manufacturer and maintain 5S areas., • Active member of Emergency Response Team. Participate in Emergency Response Training and related activities., • Promote a positive work environment by maintaining a safe work area and ensuring that their team members have the knowledge, skills and appropriate tools to perform their assigned duties and a thorough understanding of their performance expectations., • Provide prompt, appropriate feedback to team members, both positive and constructive, in a continuing effort to develop employees to their full potential., • Demonstrate a professional and positive attitude, integrity and a strong work ethic and encourages team members to do the same., • Cooperate with all root cause investigations and follow corrective actions and compliance with Company policies and procedures, and all state and federal regulations occurs within department., • Operate machines and equipment that involves set up and making adjustments to regulate temperature, pressure, flow and reactions or materials safely and in accordance with batch record and work instructions., • Basic batch processing and unit operations, able to run all milling operations., • Thinking is within well-defined procedures with assistance readily available., • Proficient in all tasks/unit operations associated with a processing area ▪ Able to complete basic mechanical work required to keep operation moving, • Complex batch processing and unit operations, such as hydrogenations, PFD operations etc., • Resolve regular technical problems and takes action to ensure the production plan continues to move Qualifications: Required • High School Diploma with 5-7 years of experience in an API Manufacturing facility or AA in Chemistry, Engineering, or other related technical field with 3-5 years of experience or BS in Chemistry, Engineering or other related technical field, • Solid understanding of GMP and FDA, • Safety Awareness, • Authenticity and motivation to contribute to team success, • Ability to independently apply scientific and/or technical knowledge in the performance of job duties, • Commitment to continuous learning and improvement, • Walking, standing for long periods of time while in plant, reaching, handling, twisting, and bending spine at waist when operating equipment., • Obtain and maintain certification as forklift operator, • Able to lift 50lbs Our Commitment: • Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies., • Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs., • Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs. Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. . All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice.

Job Description Mission: The LPN will deliver quality psychiatric nursing care to adult patients with behavioral health illnesses and substance abuse issues and serve as a member of a multi-disciplinary team. The LPN will administer prescribed medications and treatments to patients in accordance with policy. Essential Function: • Administers all medication safely in accordance with policy and documents medication given and its effectiveness., • Promptly notify the Shift Director or DON of Schedule II or Schedule III medication waste., • Maintains the safety of Buprenorphine and Methadone order sheets., • Recommends improved methods for administering medications within the limits of clinical training., • Maintains binders for easy access to auditable information., • Has a working knowledge of the Methasoft system., • Completes all required assessments promptly., • Consistently puts clients at ease regarding detox and rehabilitative treatment., • Is vigilant and identifies potential patient problems., • Demonstrates respect for client’s rights, as reflected in individualized care., • Verbalizes and demonstrates proper procedures for infection control., • Works with the unit nurses to monitor MAT clients for signs of oversedation., • Acts as a role model for other staff members., • Identify physical plant problems promptly and report them to the appropriate department for correction., • Communicate effectively to the Shift Director to resolve unit and/or staffing issues promptly., • Assures that all controlled substances are secured at the end of the shift and the area is locked at night., • Treats all clients with dignity and respect., • Consistently maintains confidentiality of client information; follows release-of-information policies and procedures., • Uses effective verbal and non-verbal techniques to ensure positive outcomes for clients., • Maintains attendance as defined by Kirkbride policy., • Demonstrates Kirkbride values in all interactions., • Promptly and correctly take and routes phone messages, answers phone promptly and courteously; provides clear, correct information to callers, visitors, and co-workers., • Graduate of an approved school of practical nursing, • Current, valid LPN license in the state of PA, • Two or more years of experience in substance or mental health nursing or community health setting, • Knowledge of abnormal psychology is typically found in the adult psychiatric population., • Thorough familiarity with psychopharmacology and the use of psychotropic medications within the adult psychiatric population, • Displays basic knowledge of computer management, including Microsoft and Methasoft, • Ability to interact effectively with the clinical team and other staff., • Organizational, problem-solving and time-management skills, • Ability to exercise self-control in potentially volatile situations such as being verbally or physically confronted in a threatening or aggressive manner., • Must be able to work and concentrate amidst distractions such as noise, conversation, and foot traffic., • Ability to handle interruptions often and move from one task to another., • Must be flexible and not easily frustrated in dealing with differences of opinion., • Ability to stoop, kneel, crouch, crawl, reach, stand, walk, push, pull, lift, grasp, and be able to perceive the attributes of objects such as size, shape, temperature, and/or texture by touching with skin, particularly that of the fingertips., • Ability to express and exchange ideas via spoken word during activities in which they must accurately convey details or important spoken instructions to others, sometimes quickly and loudly. Hearing is to perceive the nature of sound with no less than 40 db loss a Hz, 1000 Hz, or 2000 Hz with or without correction., • Ability to perceive detailed information through communication and make fine sound discriminations., • Individuals must be able to exert up to 100 pounds of force occasionally and to be able to lift, carry, push, pull, or otherwise move objects., • Work requires a minimum standard of visual acuity with or without correction that will enable people in the role to complete administrative and clerical tasks and visually observe patients on the unit and in therapeutic activities., • While a worker may possibly be subjected to temperature changes, the worker is generally not substantially exposed to adverse environmental conditions as the work is predominantly inside., • Required to travel throughout the city where drug trafficking activity is prevalent.

Job DescriptionABM, a leading provider of integrated facility solutions, is looking for a Chief Engineer. The Chief Engineer oversees all activities and staff related to the maintenance and repair of mechanical and electrical systems within a property. The goal is maximum life and reliability of all systems. The Chief Engineer must be flexible and willing to perform all duties that are assigned. Those duties may include maintenance and operations of HVAC, mechanical, plumbing and electrical systems. They may also include general building maintenance and building inspections. The Chief Engineer must respond to client requests, open and assign work orders and order parts when necessary. The Chief Engineer must also ensure compliance with expense guidelines, company policy, and governing codes. ABM (NYSE: ABM) is a leading provider of facility solutions with revenues of approximately $6.4 billion and over 130,000 employees in 300 offices deployed throughout the United States and various international locations. ABM’s comprehensive capabilities include electrical & lighting, energy solutions, facilities engineering, HVAC & mechanical, janitorial, landscape & turf, mission critical solutions and parking, provided through stand-alone or integrated solutions. Founded in 1909, ABM provides custom facility solutions in urban, suburban and rural areas to properties of all sizes — from schools and commercial buildings to hospitals, data centers, manufacturing plants and airports. The Company may require that the successful candidate hired for this position be fully-vaccinated for COVID-19, if and to the extent permitted by applicable law. The Company will make exceptions for medical, sincerely held religious belief, or other legally required exceptions. Responsibilities • Provides supervision and is responsible for the implementation of all preventive maintenance and repair operations at the facility. Schedules emergency repair activities according to priority and the abilities of assigned personnel., • Provides technical advice, encouragement and instruction to subordinates in such areas as electric theory, mechanical systems, hydraulic systems, and safety procedures., • Performs equipment inspections, noting equipment condition, ensuring that proper maintenance is being performed in accordance with Able Engineering standards., • Responsible for the implementation of the quality assurance program for all work performed by the department., • Direct or participate in various facility programs and committees relating to assigned responsibilities such as safety, disaster, fire, pollution control and civil defense., • Formulates, recommends and implements site specific policies and procedures to improve the facility physical plant and operations., • Develops a plan and/or procedure for controlling, labeling, recording estimated life expectancy, maintenance and inspecting all capital and non-capital equipment within the facility. This plan includes a long-term engineering capital plan., • Recommends equipment purchases to replace obsolete equipment items and provides assistance in formulating long-range equipment replacement requirements and coordinates actions with contractors., • Assists in the development and implementation of operating and extraordinary expense budgets as required., • Plans and schedules services of department. Establishes standards and work methods; takes steps to assure quality and quantity of performance and evaluates results. Establishes plans for improving departmental work emphasizing efficiency and economy., • Communicates policies and procedures, discusses job problems, and employee concerns with supervisors and employees. Encourages development of habits and attitudes for improved performance and good employee attitudes. Direct, train, evaluate, and counsel all engineering personnel., • Ensures that general safety, fire prevention regulations are enforced, and safe working habits are promoted throughout the facility. Ensures that all shop equipment is properly maintained and conforms to safety standards. Promotes good housekeeping principles and supervises housekeeping details., • Responsible for ensuring that the building systems are operated in the most efficient and effective manner especially as it relates to utility consumption and environmental responsibility. Implement a systematic program to promote energy awareness and conservation within the facility. Champion energy conservation programs to achieve maximum results from tenants and staff., • Maintains an on-going self-improvement program to keep abreast of new equipment, standards, codes, and maintenance procedures. Qualifications, • New Jersey Black Seal license highly preferred but not required, • Highly experienced with Plant Operations, • Experience that is commensurate with the specific facility for the position of Chief Engineer., • Highest-level relevant state/local license for Stationary Engineer and/or HVAC, plus universal level refrigerant recovery license, • BOMA accredited courses desirable, • High-rise Fire Safety Director, Haz-Mat Certification, Indoor Air Quality Certification, LEED Certification preferred, • Certification meeting OSHA ACM awareness training requirements as required, • Working knowledge of energy conservation required, formal training preferred, • Strong oral and written communication skills, • Strong employee relation skills, coaching and training skills, • Proficiency with MS Word, Excel, and Outlook

Job DescriptionDescription:Sales Account Manager - Northeast Doswell, VA Description WHO WE ARE: Specialty Coating and Laminating, LLC is a member of global packaging leader, INDEVCO Group. Specialty Coating and Laminating, LLC manufactures poly-extrusion and aqueous-coated paper and paperboard products, to include roll wrap protection, heat sealable liners, slip and tier sheets, and composite can components. WHAT WE DO: Extrusion Coating Aqueous Coating Solid Fiber Laminations Building and Construction Materials: house wrap, roof underlayment, sheathing, flashing, and adhesives COVERAGE LOCATION Ohio, West Virginia, Pennsylvania, New York, New Jersey, Maryland, Delaware, Connecticut, Rhode Island, Massachusetts, Vermont, New Hampshire & Maine. JOB SUMMARY We are seeking to add an experienced Sales Account Manager who will be responsible for seeking new business opportunities that result in increased outside sales revenue. This individual will be responsible for articulating the value of our extruded and laminated products in a solution-based manner, in addition to becoming a true and trusted partner of the customer throughout the full sales cycle. This position consists of making high volume cold calls daily, the ability to communicate effectively with prospective clients, build a pipeline, and successful client management. RESPONSIBILITIES INCLUDE: Prospecting • Prospect and Convert qualified Leads from INDEVCO North American Marketing Team., • Input activities, Leads, contacts and opportunities into the CRM system., • Forecasting, Reporting and competitor profiling., • Proactively search, identify and obtain business opportunities with new and existing customers, manage resources as required to accomplish., • Cold-Calling potential customers for industrial packaging, consumer packaging for poly coated, laminated products as well as aqueous laminated and coated sheeted products., • Work with R&D and Management teams to identify and design customer-based solutions within our product portfolio., • Ability to utilize market and customer research to build product value propositions specific to the customer and industry., • Share with SC&L team market knowledge & expertise of market segments, geographical requirements and product developments., • Monitor market conditions, product innovations, and competitors' products, prices, and sales., • Ability to complete the sales cycle with complete customer satisfaction, • Identify, address, monitor and resolve complaints with current customers regarding product, quality, and service improvement, • Ability to utilize market and customer research to build product value propositions specific to the customer and industry, • Be a part of the team by liaising with cross-functional internal teams (including Customer Service, Marketing, and Operations) to improve the entire customer experience, • Must have a firm understanding of CRM systems, • Sales Experience with coated and laminated products, • Leadership and Team Skills, • Negotiation Skills, • Interpersonal Skills, • Written & Verbal Communication, • Excellent Time Management, • Results Oriented, • Performance Driven, • Business Knowledge, • 5+ years sales experience, or 2+ years of specific sales experience in laminated and coated Industrial/Consumer Packaging., • At least 70% travel required, • Must have a firm understanding of CRM systems, • Sales Experience with coated and laminated products, • Leadership and Team Skills, • Negotiation Skills, • Interpersonal Skills, • Written & Verbal Communication, • Excellent Time Management, • Results Oriented, • Performance Driven, • Business Knowledge, • 5+ years sales experience, or 2+ years of specific sales experience in laminated and coated Industrial/Consumer Packaging., • Must have a firm understanding of CRM systems, • Sales Experience with coated and laminated products, • Leadership and Team Skills, • Negotiation Skills, • Interpersonal Skills, • Written & Verbal Communication, • Excellent Time Management, • Results Oriented, • Performance Driven, • Business Knowledge, • 5+ years sales experience, or 2+ years of specific sales experience in laminated and coated Industrial/Consumer Packaging., • Familiarity and understanding of folding carton, industrial packaging, steel and roll packaging for coated and laminated products.

Job Description Controller Fastener Dimensions, Inc. Pennsauken, NJ • $90,000 to $110,000 per year - based on experience, • Full Time – 8:30 AM to 5:30 PM, • 6 Paid Holidays, • PTO, 401K, Sick Time, • Medical, Dental, Vision & Life Insurance, Short/long-term Disability Position Summary: The Financial Controller oversees all accounting, financial reporting, and internal control functions across the organization. This position ensures accuracy, compliance with GAAP, cost visibility, and supports operational leadership with timely financial insights to drive profitability, efficiency, and compliance. The Controller acts as the financial steward for the business — maintaining integrity in reporting, ensuring fiscal discipline, and partnering with plant operations to optimize performance. Key Roles & Responsibilities: Financial Management & Reporting -Lead all aspects of monthly, quarterly, and annual closing activities. • Prepare and analyze P&L, balance sheet, and cash flow statements for accuracy and completeness., • Coordinate annual audits with external auditors., • Ensure compliance with GAAP and internal financial policies., • Maintain and reconcile general ledger accounts and banking (all FDI, RPM & Brightstars) Budgeting & Forecasting • Develop annual budgets and rolling forecasts in collaboration with plant and department managers., • Monitor performance against budgets, identifying variances and corrective actions., • Support cost-reduction initiatives by providing detailed financial analysis. Cost Accounting / Manufacturing Finance • Oversee and maintain standard cost models, bill of materials (BOM), and labor burden rates., • Analyze OEE, efficiency, and productivity impacts on cost of goods sold (COGS)., • Track and report Cost of Poor Quality (COPQ), scrap, and rework costs. Internal Controls & Compliance • Maintain strong internal control framework to ensure data integrity and fraud prevention., • Ensure compliance with AS9100 financial controls and corporate procedures., • Manage fixed assets, capital expenditures, depreciation schedules and chart of accounts., • Oversee accounts payable (A/P) and accounts receivable (A/R) functions. Leadership & Cross-Functional Support • Supervise accounting staff, ensuring competence and development., • Partner with Operations, Supply Chain, and Quality to align financial reporting with operational metrics., • Provide decision-support analytics to senior management (EBITDA, ROI, working capital). Systems & Continuous Improvement • Maintain and enhance ERP/financial systems (QuickBooks Desktop)., • Develop dashboards to monitor KPIs such as EBITA %, OEE impact, and cash flow., • Implement lean accounting and continuous improvement practices in finance processes. Additional Responsibilities: · Conduct rigorous monthly reviews of accounting records to uphold data integrity and accuracy. · Prepare financial statements in strict accordance with Generally Accepted Accounting Principles (GAAP). · Establish and maintain an efficient record retention and filing system to ensure easy access and compliance. · Manage cash flow and perform meticulous bank reconciliations to maintain financial stability. · Develop and refine sophisticated cost accounting systems and procedures to optimize financial performance. · Review, interpret, and analyze complex financial data to support strategic decision-making. · Coordinate and meticulously prepare for year-end tax preparations, providing comprehensive financial information to external accountants. · Collaborate with management to design and implement the annual budgeting process, ensuring alignment with corporate objectives. · Maintain detailed fixed asset records, including precise depreciation schedules, to ensure accurate financial reporting. · Oversee comprehensive profitability analysis, regulatory reporting, cost accounting, and productivity monitoring to support financial health. · Prepare and accurately record monthly journal entries, ensuring compliance with accounting standards. · Submit, maintain & comply with 401K. Education, Experience, Skills & Abilities: • Bachelor’s Degree in Accounting, Finance, or Business Administration (CPA or CMA preferred)., • Minimum 5–10 years progressive experience in accounting/finance, including 3+ years in manufacturing., • Strong knowledge of GAAP, cost accounting, and ERP systems., • Experience with budgeting, forecasting, and variance analysis., • Familiarity with Lean Manufacturing / Six Sigma / AS9100 preferred., • Advanced Excel and data analysis skills., • Minimum 5 years QuickBooks experience. Company DescriptionManufacturer with more than 30 years of experience in the Aerospace supply chain. Our facility in Pennsauken is set up to manufacture AN, MS, NAS and OEM bolts to print.Manufacturer with more than 30 years of experience in the Aerospace supply chain.\r\nOur facility in Pennsauken is set up to manufacture AN, MS, NAS and OEM bolts to print.

Job Description Role: Manager, Revenue Growth Management (RGM) Department: Sales Reports to: VP Commercial Strategy & Shopper Activation Location: Philadelphia, PA | Hybrid / 4x week Make a greater impact at Bonduelle Americas! At Bonduelle Americas, we're on a mission to make plant-rich eating easy, accessible, and joyful for everyone. As a certified B Corp, we invite people to embrace a flexitarian lifestyle with an expanding portfolio of plant-rich products available in and beyond the produce aisle. With four facilities and nearly 3,000 Associates in the US, we're part of something bigger: a global movement rooted in over 170 years of family heritage. Our parent company, Groupe Bonduelle (BON.PA), brings plant-rich foods to tables in nearly 100 countries and partners with growers who cultivate more than 173,000 acres of fresh, nutritious produce each year. At Bonduelle-Americas, you'll find more than just a career, you'll find purpose with a team that puts people first, values sustainability, and believes in doing well by doing good. Together, we're inspiring the shift towards a plant-rich diet that nourishes both people and the plant. Job Summary: Bonduelle is seeking a Revenue Growth Manager to build and lead our Revenue Growth Management (RGM) capability, ensuring sustainable and profitable volume growth across our branded and private label portfolio. This highly visible role will serve as the enterprise thought leader for all RGM best practices—driving pricing strategy, trade investment effectiveness, and holistic customer profitability to deliver against annual operating plan (AOP) commitments. The ideal candidate is a commercial strategist with strong financial acumen, proven expertise in CPG revenue management, and the ability to partner cross-functionally across Sales, Marketing, Category Strategy, Finance, and Omnichannel Activation. What you'll do: Revenue Growth Leadership • Develop and institutionalize RGM strategies and principles across all classes of trade (Retail, Club, Mass, Value, and Foodservice)., • Build pricing and Price Pack Architecture (PPA) guidelines to avoid channel conflict and protect brand equity., • Partner with Sales Leadership to embed RGM discipline into customer planning meetings, DSMP, JBPs, and portfolio planning sessions., • Lead post-event trade analytics to optimize future investments and drive fact-based recommendations., • Collaborate with Brand Marketing, Category Strategy, and Omnichannel Activation to align promotional strategies, shopper marketing investments, and innovation launches., • Bachelor’s degree in Business, Finance, Marketing, or related field (MBA preferred)., • 7–10+ years of progressive experience in Revenue Growth Management, Trade Marketing, or Sales Strategy within leading CPG companies; food industry experience a plus, • Deep understanding of PPA, trade spend ROI, promotional strategy, and customer profitability models., • Proven track record of influencing cross-functional stakeholders and driving commercial outcomes. The base salary for this role typically ranges from $130,000 to $140,000 annually. Actual pay will be determined based on a combination of factors, including skills, experience, expertise, and location. In addition to base pay, this role may be eligible for bonuses or other incentive programs as part of a comprehensive total rewards package, which also includes a full range of medical, financial, and wellness benefits. Life at Bonduelle: Learn more by visiting:

Job Description WHO WE ARE Baldwin Richardson Foods is focused on enriching the flavor of life. As a full-service liquid products supplier and strategic partner to the food and beverage industry, Baldwin Richardson Foods combines its formulation expertise and unique packaging options with robust processing capabilities to produce high-quality sauces, toppings, syrups, fillings, and shelf-stable beverages for the world's most iconic Quick Service Restaurants (QSRs), Consumer Packaged Goods (CPG) brands, and food service companies. Its state-of-the-art Innovation & Culinary Center transforms trends and culinary inspiration into legendary products through an award-winning commercialization process. The company also manufactures and markets Mrs. Richardson's dessert sauces and Nance's mustards/condiments in addition to producing finished goods for the private label sector. BRF maintains its headquarters and a manufacturing facility in Macedon, New York; with a Culinary Innovation Center in Westmont, Illinois; and offices and manufacturing facilities in Williamson, New York; Pennsauken, New Jersey; and Corona, California. This role can report into any of our sites (NY/NJ/IL/CA). WHAT WE NEED The Senior Manager, Food Safety provides enterprise-wide leadership of food safety programs for a multi-site manufacturer of syrups, sauces, fillings, and aseptic beverages (both low-acid and high-acid). This position is responsible for developing, implementing, and sustaining robust food safety systems across the organization. The role has direct oversight of the corporate regulatory team and corporate sanitation function, ensuring that all sites operate to the highest standards of food safety, regulatory compliance, and hygienic design. This includes leadership in LACF regulations, aseptic processing validations, and thermal processing standards. The ideal candidate is a recognized subject matter expert with the ability to influence across functions and drive a culture of food safety excellence. WHAT YOU WILL DO Enterprise Food Safety Leadership & Technical Expertise: • Lead, in partnership with Site Quality Managers, the development and implementation of Food Safety Plans, HACCP systems, prerequisite programs, and all food safety-related programs to meet regulatory and customer requirements., • Support and guide Plant Quality Managers in preparation for and execution of third-party and regulatory audits, including FDA, NYS, Cal DPH, and SQF., • Ensure sites properly execute procedures to maintain food safety and regulatory compliance across FSMA, HACCP, GMP, Pest Control, Allergen Control, Chemical Control, Formula Control, mock trace and recall, LACF, and environmental monitoring programs., • Ensure all food safety and regulatory processes are documented, standardized, and kept current across all facilities., • Lead the design, implementation, and continual improvement of corporate food safety programs, ensuring consistency and alignment across all locations., • Serve as the company’s Process Authority for LACF and aseptic processing, overseeing validation studies, scheduled process filings, and process deviation evaluations., • Act as the subject matter expert on thermal processing technologies, including low-acid and high-acid aseptic processing, equipment, and methodologies., • Provide guidance on process design, equipment selection, and troubleshooting., • Develop and implement thermal processing parameters, including time and temperature profiles, to ensure product safety and quality., • Collaborate with R&D, production, and QA to design and optimize thermal processing systems that meet regulatory requirements and product specifications., • Conduct feasibility studies to evaluate new technologies or process improvements in thermal processing., • Plan and execute heat penetration studies to validate processing parameters and confirm proper heat distribution in all container types., • Analyze heat penetration data, interpret results, and recommend adjustments or improvements to thermal processing systems., • Lead validation efforts for low-acid aseptic processing and packaging systems, ensuring all processes meet FDA regulations and commercial sterility requirements., • Lead and develop the corporate regulatory team, ensuring consistent application of regulatory requirements across all facilities., • Oversee all regulatory compliance activities, including FDA (21 CFR Part 113 & 114), FSMA, USDA, state, and applicable international regulations., • Direct scheduled process filings, product registrations, labeling compliance, and regulatory submissions., • Serve as the senior corporate contact for all regulatory agency interactions, inspections, and inquiries, ensuring appropriate representation and timely resolution of issues., • Lead and develop the corporate sanitation team, providing enterprise-wide strategic direction for sanitation programs and hygienic design standards., • Establish corporate sanitation policies, SSOPs, allergen cleaning validation protocols, and master sanitation schedules for consistent execution across all sites., • Oversee the company’s Environmental Monitoring Program at the enterprise level, ensuring program design, execution, and verification meet both regulatory and customer standards., • Partner with plant teams to evaluate sanitation performance, analyze data trends, and implement improvements to reduce risk and enhance operational efficiency., • Monitor process data, performance indicators, and quality metrics to identify opportunities for process optimization., • Drive initiatives to improve energy efficiency, product quality, and operational effectiveness in thermal processing., • Participate in new product development, process scale-up, and equipment upgrade projects. WHAT YOU WILL NEED TO BE SUCCESSFUL • Bachelor’s Degree in Food Science, Food Engineering / Biological Systems Engineering, Microbiology, Chemical Engineering (with food process focus), or related discipline., • Ten (10) plus years of Food Industry Experience, • Seven (7) plus years’ experience with HACCP, SQF, GFSI, FDA and USDA audits, • Five (5) plus years people management experience, • Five (5) plus years of experience in Aseptic Processing & Packaging of low-acid and high-acid foods is required., • Five (5) plus years of experience in Thermal Processing in food manufacturing is required., • Five (5) plus years of experience in Sanitation is required., • Must be able to travel 60%. At BRF, base pay is one part of our total compensation package and is determined within a range. Your base pay will depend on your skills, qualifications, experience, and location. You’ll also receive a comprehensive benefits package including a low premium and out of pocket cost medical, dental and vision coverage, 401k with company match, generous sick and vacation time, 9 paid holidays, birthday and floating holidays, volunteer time and more! #LI-EB1

Job DescriptionJOB SUMMARY: The Operations Manager (OM) is responsible for the overall supervision and oversight of the entire Facilities department that serves base building functions. These duties include, but are not limited to the installation, repair & maintenance and documentation of base building systems and equipment. A major emphasis is paced on the oversight and upkeep of the grounds, infrastructure and all applicable HVAC equipment, (fans, pumps, heat exchangers, cooling towers, building automation system, etc.), plumbing systems, and electrical systems. The OM will ensure that the upkeep will be in the best manner possible for the safety and health of all concerned, and will coordinate these activities as needed. The OM is responsible for the implementation and documentation of site safety plans, training plans (both owner and ABM required training) and all owner and ABM operational standards and guidelines to the staff (including but not limited to owner approved standard operating procedures). The OM will be responsible for regular site inspections to the various properties within the portfolio to maintain client / ABM standards and perform quality assurance checks on team and vendor work. REPRESENTATIVE FUNCTIONS OR DUTIES: The OM provides supervision and is responsible for the implementation of all preventative maintenance and repair operations at the facility; this includes, ensuring the proper distribution of work order, both preventive and corrective, coordinating emergency repairs in accordance to priority and the abilities of assigned personnel. Provides technical advice, encouragement and instruction to subordinates in such areas as electric systems, mechanical systems, plumbing systems, and safety procedures. The OM will perform regular equipment/facility inspections, noting equipment condition, insuring that proper maintenance is being performed in accordance with owner and ABM standards. He is responsible for the implementation of the quality assurance program for all work performed by the department. The OM is expected to work with the owner to create various facility programs. These programs range from inspections of tenant construction projects to creating and implementing a cohesive ‘Emergency Response Plan’ for the building. The OM will formulate, recommend and implement polices and procedures that will improve the overall operation of the entire facility. This includes developing a plan with procedures for controlling, labeling, recording estimated life expectancy, maintenance of all capital and non‑capital equipment within the facility. This plan should include recommendations of equipment purchases to replace obsolete equipment; as well as providing assistance in formulating long‑range equipment replacement requirements. This plan will also include the inspection of work performed by the ABM staff as well as inspection of work performed by outside contractors. There will be constant evaluation of this plan to ensure that the building is operating as efficiently as possible; whether relating to man power or utilities. The OM will assist the owner in the development of the annual operating and capital budget. The OM will also be responsible for ensuring that all facility related expenditures (repairs, supplies, etc.) stay within this budget.The OM will communicate ABM and owner policies and procedures; discuss job and employee concerns with supervisors and employees. The OM will solicit feedback from all ABM employees on ways to improve the operations and maintenance of the building; and then share this feedback with the owner. The OM will encourage and foster the development of good working habits and attitudes for improved performance. Direct, train, evaluate and counsel all engineering personnel. Any and all union related complaints and issues will be immediately reported to ABM Management. Administrative tasks include ensuring the weekly forecast is complete and accurate, ensure the completion and subsequent sign-off of overtime request forms, ensure that supply order requests are completed and submitted to owner in a timely fashion. OM will also provide approval for employee timecards through ABM Engineering systems and provide annual staff performance reviews and ensure staff is trained on ABM Engineering Safety Training, Able Engineering Policies and any applicable Site specific policies and Stand Operating Procedures.Responsibilities • Responsibilities include, but are not limited to the following:, • Supporting and following ABM Engineering Services operational policies and standards., • Supporting and following ABM Engineering Services safety program., • Performing related duties as required, • Reporting to and collaborating with the owner of the facility all pertinent issues and concerns., • Work with management on plant related and tenant related issues., • Sets and maintains a professional work environment with staff., • Assures good communication, • Ensure standards of service and commitment, • Ensure compliance with safe practices and standards, • Develop goals for department, staff and self., • Builds morale and a team approach.

Job Description At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands—including Curaleaf, Select, and Grassroots—offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Store Manager Job Type: Full Time, Exempt (Bonus Eligible) Location: 640 Creek Rd, Bellmawr, NJ 08031 The candidate must have open availability on weekdays, evenings, weekends, occasional overnights, and holidays. Who You Are: As a Store Manager at Curaleaf, you will lead the store's financial success and operational excellence while aligning your team with Curaleaf's mission, vision, and values. You will be responsible for managing all aspects of store performance, including profitability, adapting to business trends, and overseeing financial management. The Store Manager will also be responsible for attracting, onboarding, and developing top talent; creating a strong pipeline for succession planning, and fostering a culture of continuous growth and improvement. A Store Manager at Curaleaf acts as a brand ambassador, educating customers about Curaleaf's products while leading a collaborative team-selling environment. Your leadership will inspire your team to exceed sales goals, deliver exceptional customer service, and support the overall growth of the business. What You'll Do: • Empower your team to deliver exceptional customer experiences while driving sales and exceeding key performance indicators (KPIs)., • Attract, hire, and retain a diverse team of top talent by setting clear goals and expectations., • Train, mentor, and develop your team, leveraging individual strengths and fostering growth opportunities., • Accurately forecast payroll to optimize productivity, ensuring the team achieves sales and payroll targets while managing operational workloads efficiently., • Oversee P&L, strategically driving revenue growth and improving store efficiency. Identify underperforming areas and implement solutions using company programs and tools., • Stay ahead of business trends and share insights with senior leadership to refine strategies and improve results., • Ensure operational excellence by delegating tasks effectively, maintaining clear brand messaging, and upholding company standards., • Create a sense of urgency and accountability within the team, adapting quickly to shifts in the retail landscape., • Protect company assets by ensuring compliance with safety protocols, inventory control, and loss prevention procedures, all while adhering to local, state, and federal regulations., • Analyze trends and manage stock levels to avoid shortages or overstock, ensuring that inventory is ordered and managed efficiently., • Travel Requirements: 10% - 25%., • 5+ years of high-volume retail Store Manager or Area/District Manager experience in a store generating $10M+ in annual sales., • Proven experience managing large teams of 25+ employees, including hiring, training, and performance management., • Proven ability to drive sales and c onsistently exceed performance goals in a high-complexity retail environment., • Experience building and leading high-performing teams with a focus on talent development, mentorship, and succession planning., • Strong communication skills and the ability to collaborate effectively across all levels of the organization., • Exceptional customer service skills with a solutions-oriented mindset., • Open to giving and receiving feedback, and skilled at managing change and fostering adaptability., • Demonstrated success in overseeing store operations, including visual merchandising, financial management, and loss prevention., • Flexibility to work nights, weekends, and holidays as needed., • Commitment to maintaining compliance with state regulations., • You have experience in the cannabis industry. While performing the duties of this Job, the employee is regularly required to stand, walk, talk or hear, stoop, kneel, crouch or crawl, use hands and finger to feel, reach with hands and arms, and lift up to 25 pounds. The employee is occasionally required to climb, balance, and lift up to 50 pounds. This position requires close vision (clear vision at 20 inches or less). Work Environment: This job operates in a professional retail environment. This role routinely uses standard office equipment such as computers, POS systems, phones, photocopiers, and filing cabinets. This position has allergen warnings including potential exposure to dust, pollen, and plant pathogens and requires the ability to work in confined spaces, have a high stress tolerance, adaptability, and be flexible to work in an ever-changing environment. Curaleaf Pay Transparency$80,000—$85,000 USD What We Offer: • Career Growth Opportunities, • Competitive Pay and Benefits, • Generous PTO and Parental Leave, • 401(K) Retirement Plan, • Life/ Disability Insurance, • Community Involvement Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: • Lead and Inspire., • Commit to Win., • ONE Curaleaf. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

Job Description Job Description: This position supports Code 412 which is responsible for the engineering and logistics support of the steam systems of numerous Navy vessels and facilities. Code 412’s responsibilities include, the NSWCPD Steam Systems Safety and Reliability Program, Amphibious Ship Steam Propulsion Plant Readiness and Safety Program, LCC-19 Extended Service Life Program (ESLP), Surface Ship HM&E Sustainment Program, LHD Midlife Program, and DOD Facilities Inspection Program. Skills and Experience: • Ten (10) years of experience in the conduct of conventional steam or nuclear propulsion modernizations., • Five (5) years specialized experience in preparing or approving Departure from Specifications (DFS), engineering senior management of Ship Change Documents (SCD) and Ship Selected Record (SSRDs) development for steam systems components., • A minimum of 5 years of specialized experience managing engineering functions and processes for U.S. Navy Large Deck Amphibious Ship Steam Propulsion Plants and associated equipment, piping and systems Degree Requirements: • High school graduate or GED, graduate of military schools which provided an in-depth knowledge of naval shipboard systems maintenance and operation, or be a graduate of a trade, industrial or correspondence school for engineering., • Must be a U.S. citizen, • A secret security clearance Company DescriptionORBIS is an ISO 9001 certified, Veteran Owned Small Business (VOSB) with over 20 years of major Navy Program experience leading, delivering, and managing professional support services for NAVSEA, the Warfare centers and the Navy industrial enterprise. From our beginnings in the submarine program, we have grown to also support other DOD and Federal Government branches and a number of commercial customers. ORBIS provides capabilities encompassing the full DOD lifecycle of acquisition, program management, delivery, modernization, quality, audits and certification. Our CEO, Guy Mossman, has a long history with the submarine program and before starting ORBIS was the Executive Director for PEO SUBs. Unique for a small business and always part of the company vision, we operate a research and development laboratory in Charleston, SC, focused on Automated Test Equipment and related technologies. We leverage our extensive portfolio of engineering and technical support tasks to provide innovative, cost-effective, and on-time solutions that exceed the requirements of Government and Commercial customers.ORBIS is an ISO 9001 certified, Veteran Owned Small Business (VOSB) with over 20 years of major Navy Program experience leading, delivering, and managing professional support services for NAVSEA, the Warfare centers and the Navy industrial enterprise. From our beginnings in the submarine program, we have grown to also support other DOD and Federal Government branches and a number of commercial customers. ORBIS provides capabilities encompassing the full DOD lifecycle of acquisition, program management, delivery, modernization, quality, audits and certification. Our CEO, Guy Mossman, has a long history with the submarine program and before starting ORBIS was the Executive Director for PEO SUBs. Unique for a small business and always part of the company vision, we operate a research and development laboratory in Charleston, SC, focused on Automated Test Equipment and related technologies. We leverage our extensive portfolio of engineering and technical support tasks to provide innovative, cost-effective, and on-time solutions that exceed the requirements of Government and Commercial customers.

Job Description This position supports the Maintenance Team and production facility. The Maintenance Project Manager will oversee and execute plantwide preventative maintenance and inventory control programs, as well as support daily operations of the Maintenance Team. This is a full-time position with daytime hours covering the duration of the production day, primarily Monday through Friday, including early and late hours as needed. This candidate must be able to work in a dynamic setting, communicate effectively with team members, perform multiple duties, and engage in new opportunities each day. • Manage and expand a plantwide preventative maintenance program, • Help oversee daily maintenance processes and operations by structuring department activities, reporting, and scheduling, • Identify and perform regular preventative maintenance on equipment, • Identify, manage, and control inventory and safety-stock levels, • Optimize and integrate PO process with inventory and financial systems, • Implement monitoring systems for production and filling equipment, • Provide technical solutions when electrical or general control issues arise, • Assign and complete plant maintenance and work order requests/repairs, • Adhere to Good Manufacturing Practices (GMPs), • Follow Safe Quality Foods protocols, • Assist in maintaining a clean and safe work environment Requirements • Minimum of 5 years of relevant work experience required, • Mechanic skills related to food manufacturing facility and related equipment, • Experience with reliability, design, planning and scheduling of predictive and preventative maintenance concepts, • Experience with inventory control and project management, • Strong communication skills required, especially in relation to verbal communication between mechanics, operators, and supervisors across departments, • Strong attention to detail, • Must be a self-starter and self-motivated, • Must be able to manage changing priorities associated with a fast-paced, team environment Benefits • Weekly pay with direct deposit, • Health insurance, • Various supplemental insurance policies available after 90-day introductory period, • Life insurance available after completion of 90-day introductory period, • 401-K retirement plan available after one year of employment, • Option to participate in uniform program I. Rice is an equal opportunity employer and derives our staff skills through a diverse and talented workforce. This person will work closely with all departments and persons in our facility and must conduct themselves professionally at all times.

Job Description Role: Associate Marketing Manager Department: Marketing Reports to: Sr Product Portfolio Manager Location: Philadelphia, PA | Hybrid (4x/week onsite) Position Summary: We are looking for a proactive and analytical Associate Marketing Manager to support brand strategy, product marketing and campaign execution across our portfolio including packaging graphics. This role is instrumental in driving brand growth, consumer engagement and market share through data-driven decision-making and cross functional collaboration. Make a greater impact at Bonduelle Americas! At Bonduelle Americas, we're on a mission to make plant-rich eating easy, accessible, and joyful for everyone. As a certified B Corp, we invite people to embrace a flexitarian lifestyle with an expanding portfolio of plant-rich products available in and beyond the produce aisle. With four facilities and nearly 3,000 Associates in the US, we're part of something bigger: a global movement rooted in over 170 years of family heritage. Our parent company, Groupe Bonduelle (BON.PA), brings plant-rich foods to tables in nearly 100 countries and partners with growers who cultivate more than 173,000 acres of fresh, nutritious produce each year. At Bonduelle-Americas, you'll find more than just a career, you'll find purpose with a team that puts people first, values sustainability, and believes in doing well by doing good. Together, we're inspiring the shift towards a plant-rich diet that nourishes both people and the plant. Job Summary: We are looking for a proactive and analytical Associate Marketing Manager to support brand strategy, product marketing and campaign execution across our portfolio including packaging graphics. This role is instrumental in driving brand growth, consumer engagement and market share through data-driven decision-making and cross functional collaboration. What You Will Do: • Assist in the development and execution of brand plans, including positioning, messaging and packaging graphics., • Support product launches, line extensions and promotional campaigns., • Collaborate with creative, media and agency partners to ensure brand consistency., • Analyze consumer trends, competitive activity and category dynamics using syndicated and panel data., • Translate insights into actionable recommendations for marketing programs and product development., • Manage timelines and deliverables for marketing initiatives including digital, social and experiential campaigns., • Coordinate with sales, trade marketing and supply chain to ensure flawless execution., • Work closely with R&D, finance and operations to support innovation and commercialization efforts., • Participate in cross-functional meetings and contribute to project planning and execution., • Manage project timelines, develop presentations and maintain and organize digital assets., • Bachelor's degree in Marketing, Communications, Business, or related field, • 2-4 years of marketing experience preferably in CPG., • Strong analytical skills and familiarity with marketing metrics and syndicated data., • Experience with digital marketing platforms and tools such as Adobe, Illustrator, Photoshop, WordPress and Canva. Actual compensation will be determined based on a combination of factors, including skills, experience, expertise, and location. In addition to base pay, this position may be eligible for bonuses or other incentive programs as part of a comprehensive total rewards package, which includes: • Medical, dental, and vision coverage with multiple plan options, • 401(k) retirement savings plan with diverse investment choices, • Generous paid time off and paid holidays, • Tuition reimbursement and professional development programs Learn more by visiting:

Job Description Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented and diverse workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Reliability Engineer is responsible for guiding efforts to ensure reliability and maintainability of equipment, processes, utilities, facilities and controls in collaboration with the Maintenance Department. This role will identify and manage asset reliability risks that could adversely affect plant or business operations. Core Responsibilities: • Professionally and systematically defines, designs, develops, monitors, and refines an asset maintenance plan that includes:, • Value-added preventive maintenance tasks for new and existing equipment., • Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems., • Develops and provides input to a risk management plan that will anticipate reliability-related and non-reliability related risks that could adversely impact plant operations., • Participates in the development of criteria for and evaluation of equipment and technical MRO suppliers and technical maintenance service providers., • Develops engineering solutions to repetitive failures and all other problems that adversely affect plant operations. These issues may include capacity, quality, cost or regulatory compliance issues. To fulfill this responsibility, the reliability engineer applies data analysis techniques that could include:, • Reliability modeling and prediction, • Fault tree analysis, • Six Sigma methodology, • Root cause analysis (RCA) and root cause failure analysis (RCFA), • Failure reporting, analysis and corrective action system (FRACAS), • Works with Production to perform analyses of assets including:, • Asset utilization, • Equipment effectiveness, • Remaining useful life, • Other parameters that define operating condition, reliability and costs of assets., • Provides technical support to maintenance personnel., • Participates in the development of design and installation specifications along with commissioning plans and participates in the final commissioning of new installations., • Applies value analysis to repair/replace, repair/design and make/buy decisions. Required • BS/MS in Mechanical Engineering, Reliability Engineering, or equivalent degree., • Minimum of 5 years of maintenance and reliability, production management, engineering or operations experience., • Experience with and a thorough understanding of technical concepts, practices and procedures in bulk pharmaceutical manufacturing, and related support systems., • Strong knowledge of preventive maintenance programs and the tools associated with failure detection (i.e. vibration analysis, oil monitoring and thermography) as well as the software associated with them., • Working knowledge of Computerized Maintenance Management Systems., • Experience working with Microsoft Office (Outlook, Word, Excel, Project, and Visio), • Ability to read and understand repair manuals, specifications, drawings, and schematic diagrams., • Excellent communication and interpersonal skills., • Excellent organizational skills and detail oriented., • Good technical writing skills, • Must be able to work independently with minimal supervision. Our Commitment: • Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies., • Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs., • Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs. Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice.

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: · Assumes the responsibilities of the Nursing Home Administrator in his/her absence. · Supervises and enforces policies and procedures of the facility. · Monitors facility to provide a clean, safe environment for residents and staff which is conducive to a high level of resident care. · Assists in directing the utilization of the facility’s resources: • Personnel resources: Monitors the staffing of the facility on a daily basis to assure resident care, quality assurance, and budget control. Reviews budgeted positions and staffing vacancies and develops a plan of correction. Monitors the utilization of any temporary staffing personnel in the facility. Keeps accurate statistical data and reports., • Monetary resources: Monitors payroll in all assigned departments. Monitors use of overtime. Provides written justification and keeps statistical data. Initially approves all purchase orders. Assures necessity, justification, and vendor information. Monitors the use of supplies used in the facility on a day to day basis. Controls special accounts such as petty cash and resident account balances. · Assists in monitoring infection control policies for resident and staff safety. · Assists with review of incident and accident reports of residents, staff, and visitors, and ensures implementation of appropriate facility policy. Responsible for implementing the Workman’s Compensation Program in conjunction with Human Resources. · Assists in monitoring mandatory annual in-services and other staff development programs, including planning, and promoting. · Assists in ensuring that all hiring follows appropriate personnel procedures. Ensures that new hires have completed Orientation and understand their job responsibilities. · Assists in monitoring personnel records for complete, accurate, appropriate, and current information. · Supports the Administrator in census control: Represents the facility to the community and referral agencies. Participates in the admissions meeting each day to discuss possible admissions and re-admissions. Reviews resident admissions for appropriateness and the ability of the facility to provide the required resident care services. Reviews census control objectives with the Administrator on a regular basis. · Participates in Case Mix Index Meetings as part of the interdisciplinary team evaluating resident assessment accuracy. · Assists the Administrator in compiling, organizing, updating, purging, and filing data (Corporate Disclosure Statement, Annual Operating Budget, Annual Capital Budget, Statement of Authority from the governing body to manage the facility, Statement of Authority to manage in the absence of the Administrator, etc.) in the Compliance Manuals. · Assists in monitoring committee meetings as assigned. · Furnishes written reports to Administrator as assigned. · Maintains open, positive communication. Promotes good working relationship with the unions representing employees in the facility. · Participates in family meetings for the purpose of sharing information and receiving feedback on the resident care given in the facility. Responsible to assist the Administrator to manage the facility in such a manner that the facility will have full licensure status. · Remains current in long-term care management via professional journals, corporate policies and procedures, networking with other Assistant Administrators, and attendance at professional meetings and workshops. · Assists with Human Resources related functions for assigned departments to include disciplinary documentation and Worker’s Compensation documentation; along with the granting of leaves of absence and the appropriate documentation. · Assist in monitoring of external consultants delivery of services General Responsibilities · Must work the days and hours necessary to perform all assigned responsibilities and tasks. Must be available (especially during regular business hours or shifts) to communicate with supervisors, customers, vendors and any other person or organization with whom interaction is required to accomplish work and employer goals. · Must be punctual and timely in meeting all requirements of performance, including, but not limited to, attendance standards and work deadlines; beginning and ending assignments on time; and scheduled work breaks, where applicable. · Must maintain courteous, professional and effective working relationships with employees at all levels of the organization. · Must develop and maintain courteous and effective working relationships with clients, vendors and/or any other representatives of external organizations. · Must assume responsibility for providing timely, appropriate responses to requests/suggestions/complaints or refer such comments to the appropriate person. When referring requests/suggestions/complaints to another individual, the employee must follow-up in writing to the individual and must maintain an accessible copy of the referral, or follow company guidelines. · Must communicate information and state problems or challenges to be resolved in a clear, concise, courteous, nondiscriminatory and professional manner, and be able to provide clarification, as necessary. · Must show respect for the opinions of others and behave in such a way as to ensure an atmosphere free of needless interruptions, difficulty and/or discrimination. · Must receive and provide clear, constructive feedback regarding work performance (to/from individuals or groups) and be able to clarification, as necessary. · Must handle in a constructive, non-disruptive manner, the multiple business, organizational and interpersonal changes or stresses that may exist in the employee’s work, work processes, dealings with other personnel, and supervision (provided or received). (“Work processes” include but are not limited to, how work is performed, supervised or distributed: how problems are solved; and how decisions are made.) · Must be sufficiently adaptable to accept and perform in a timely and effective manner work assignments that are outside the normal (day-to-day) routine. · Must adapt, with minimal or no advance notice, to changes in how business is conducted and work is accomplished. ESSENTIAL KNOWLEDGE & SKILLS: 1. Education/Training/Work Experience: Education: Bachelors degree in business administration, computer science or related desired. Equivalent combination of education and experience. Certificate/Licenses: Current active license as Nursing Home Administrator in Pennsylvania, or progression toward that goal. Work Experience: Successful completion of 12 week internship program approved by the State and one year administrative experience in long term care facility. Amazing Benefits for NewCourtland Team Members: * $10 per pay employee-only medical plan, 100% employer-paid co-insurance, $0 cost urgent care * Free Dental Insurance for you and your family * Free Life Insurance * Tuition Assistance after 90 days - we support your professional growth * Employee Referral Bonuses - bring your best, refer the best! • 403(b) Retirement Plan with company contributions

Job Description Role: Director, Category Strategy & Insights Department: Sales Reports To: VP Commercial Strategy & Omni-Channel Activations Location: Philadelphia, PA (Hybrid, onsite 4 x week) Salary Type: Exempt Make a greater impact at Bonduelle Americas! At Bonduelle Americas, we're on a mission to make plant-rich eating easy, accessible, and joyful for everyone. As a certified B Corp, we invite people to embrace a flexitarian lifestyle with an expanding portfolio of plant-rich products available in and beyond the produce aisle. With four facilities and nearly 3,000 Associates in the US, we're part of something bigger: a global movement rooted in over 170 years of family heritage. Our parent company, Groupe Bonduelle (BON.PA), brings plant-rich foods to tables in nearly 100 countries and partners with growers who cultivate more than 173,000 acres of fresh, nutritious produce each year. At Bonduelle-Americas, you'll find more than just a career, you'll find purpose with a team that puts people first, values sustainability, and believes in doing well by doing good. Together, we're inspiring the shift towards a plant-rich diet that nourishes both people and the plant. Position Summary: As Director, Category Strategy & Insights, you will lead the strategic narrative for Bonduelle’s plant-forward portfolio, owning category strategy and new-item selling stories that inform how we show up across our retail classes of trade. You’ll transform complex data into persuasive narratives that guide assortment, shelf, promotions, and brand decisions and, ultimately category share growth. In doing so, you’ll help Bonduelle become a more insight-forward, customer-centric organization. You’ll integrate category and channel dynamics as part of a larger commercial go-to-market strategy, with collaboration and feedback loops across product development, brand marketing, revenue growth management, customer planning and omni-channel activation. What you’ll do: Strategy, Storytelling & Growth Leadership * Shape and drive the overall category narrative, prioritizing shopper-based growth levers, white space opportunities, and retailer alignment. * Develop compelling category selling stories and new-item selling stories, bridging consumer/shoppers insight with retailer imperatives and internal capabilities. * Lead “captaincy” conversations with customers and Sales partners — owning strategic and tactical discussions from insight through execution. Insights, Analytics & Forecasting * Deliver deep-dive, multi-dimensional analysis to uncover retailer, category, and shopper trends, distill insights and create stories and action plans. * Synthesize syndicated (SPINS< Nielsen, IRI), loyalty/panel (Luminate, 84.51), POS, eCommerce and internal data to uncover opportunities, quantify risk and build scenario models. * Construct share forecasts and scenario planning to support selling stories and strategic plans. Assortment, Shelf & Merchandising Strategy * Lead customer line reviews, with insights to support base business and innovation recommendations. * Lead shelf / POG strategy — considering adjacencies, pack-out, share-of-shelf allocation and days-of-supply. * Guide assortment decisions (Bonduelle brand portfolio priorities, SKU priority lists,SKU rationalization) * Collaborate with Trade, Commercial Strategy & Planning, and Brand Marketing to co-create in-store and digital merchandising concepts (endcaps, secondary displays, digital shelf treatments) framed in selling stories. Cross-Functional Leadership & Execution * Work closely with Commercial Strategy & Planning, Omni Channel Activation, Brand Marketing, Sales, Revenue Growth Management to ensure alignment in strategy and execution. * Translate narrative into action: partner with Customer and Sales teams to operationalize plans and deliver business commitments. * Lead business reviews, joint business plans (JBPs), and ongoing account governance — delivering story-driven presentations that lead to decisions. * Be an expert storyteller — distill complex data into persuasive narratives that engage and influence both internal and external stakeholders. * Own dashboards, performance reporting, and communication to Sales leadership and executive management. * Coach and develop your team (senior analysts, category managers) on blending analytic excellence with narrative fluency; establish best practices across the organization. Compensation & Benefits: The base salary for this role typically ranges from $170,000 to $185,000 annually. Actual pay will be determined based on a combination of factors, including skills, experience, expertise, and location. In addition to base pay, this role may be eligible for bonuses or other incentive programs as part of a comprehensive total rewards package, which also includes a full range of medical, financial, and wellness benefits. Life at Bonduelle: Learn more by visiting:

Job Description Position: Manager, Corporate Food Safety and Quality Department: Corporate Food Safety & Quality Reports To: Director, Food Safety & Quality Salary Type: Exempt Location: Philadelphia, PA (Hybrid) Irwindale, CA (Hybrid) Make a greater impact at Bonduelle Americas! At Bonduelle Americas, we're on a mission to make plant-rich eating easy, accessible, and joyful for everyone. As a certified B Corp, we invite people to embrace a flexitarian lifestyle with an expanding portfolio of plant-rich products available in and beyond the produce aisle. With four facilities and nearly 3,000 Associates in the US, we're part of something bigger: a global movement rooted in over 170 years of family heritage. Our parent company, Groupe Bonduelle (BON.PA), brings plant-rich foods to tables in nearly 100 countries and partners with growers who cultivate more than 173,000 acres of fresh, nutritious produce each year. At Bonduelle-Americas, you'll find more than just a career, you'll find purpose with a team that puts people first, values sustainability, and believes in doing well by doing good. Together, we're inspiring the shift towards a plant-rich diet that nourishes both people and the plant. Position Summary: This job leads the overall food safety and quality programs within the manufacturing pillar of Bonduelle Americas. The Manager, Corporate Food Safety and Quality is responsible for the development, oversight, and execution of the Food Safety and Quality programs at all internal BA manufacturing facilities and internal warehouses/3PLs. This position effectively collaborates with facility operations leadership and cross-functional departments to drive the food safety and quality metrics, compliance and continuous improvement in products and processes to meet internal, customer and regulatory requirements. This role is a key part of BA’s success by directing the development, implementation and continuous improvement of food safety and quality assurance systems, standards and programs to ensure the delivery of safe, wholesome, quality products to our customers nationally. The ideal candidate will demonstrate acute critical thinking skills and the ability to craft and execute solutions in a fast-changing environment. This candidate must be forward-thinking in their approach to maintaining the food safety and quality of our products, while modeling and acting in accordance with Bonduelle’s mission, vision, and principles. What You’ll Do • Lead and Develop the Team: Directly supervise a team of Food Safety and Quality professionals, including Specialists, fostering a culture of accountability, collaboration, and continuous improvement., • Oversee Food Safety & Quality Systems: Manage all food safety and quality programs across internal manufacturing and warehousing sites — from raw material receipt through finished product delivery., • Establish and Maintain Programs: Develop, implement, and verify all produce-related food safety and quality policies, procedures, and records. Oversee programs related to training, change management, and document control (including version control, distribution, archival, retrieval, retention, and destruction)., • Benchmark and Align Programs: Ensure Bonduelle’s food safety and quality standards are aligned with broader corporate initiatives and benchmarked against industry best practices., • Audit Readiness & Leadership: Support facilities in maintaining audit readiness (SQF, Commercial Food Sanitation, customer, and regulatory audits) and serve as the Corporate lead during such audits., • Ensure Hygienic Design & Sanitation: Oversee hygienic design, traffic flow, sanitation programs, and environmental monitoring across all sites in accordance with CFS and regulatory requirements., • Drive Continuous Improvement: Lead initiatives to enhance process controls, performance metrics, and customer complaint resolution through a data-driven approach., • Champion Digital Quality Systems: Act as a quality leader for digital food safety and quality applications, leveraging data analytics to track metrics, identify trends, and drive continuous improvement., • Customer Support: Partner with Sales and Consumer Relations to address customer and consumer food safety or quality concerns, including communication, questionnaires, and portal management., • Technical Expertise: Serve as a subject matter expert on food safety and quality for both internal stakeholders and external partners., • Innovation Support: Collaborate with Product Development and cross-functional teams to ensure the safety and quality of new and existing products., • Corporate Audit & Compliance: Manage the Corporate internal audit program to verify compliance with company and regulatory standards., • Recall & Traceability: Support the execution of product recall and traceability exercises., • Sustainability & ESG: Contribute to environmental and social initiatives, advancing progress toward Bonduelle’s ESG and B Corp certification goals., • Project Leadership: Lead and influence large-scale, cross-functional projects and initiatives to elevate organizational food safety and quality performance., • Experience & Education: 10+ years of supplier food safety experience within the food industry, or 5+ years with a master’s degree in a related field. Minimum of 3 years in a supervisory or leadership capacity., • Regulatory Expertise: Strong understanding of food safety regulations (USDA, FDA, etc.) and familiarity with fresh produce standards preferred., • Audit Proficiency: Hands-on experience with Global Food Safety Initiative (GFSI) audit schemes—SQF certification preferred; exposure to other audit programs is a plus., • Analytical Strength: Skilled in analyzing complex data, identifying root causes, and recommending effective, data-driven solutions., • Quality Leadership: Knowledge of quality assurance methodologies within manufacturing environments; able to design, communicate, and champion continuous improvement initiatives., • Technical Fluency: Proficient in Microsoft 365 (Excel, Word, PowerPoint) and comfortable with data analytics platforms such as Tableau, Power BI, or JDE., • Exceptional Communicator: Excellent written and verbal communication skills; able to partner effectively across all levels and functions., • Collaborative & Resilient: Thrives in fast-paced, changing environments; skilled in managing conflict, resolving issues, and leading through ambiguity., • Project Management: Proven ability to manage multiple projects end-to-end and drive measurable outcomes. The base salary for this role typically ranges from $114,000 to $126,000 annually. Actual compensation will be determined based on a combination of factors, including skills, experience, expertise, and location. In addition to base pay, this position may be eligible for bonuses or other incentive programs as part of a comprehensive total rewards package, which includes: • Medical, dental, and vision coverage with multiple plan options, • 401(k) retirement savings plan, • Generous paid time off and paid holidays, • Tuition reimbursement and professional development programs Learn more by visiting:

Job DescriptionCompany Description Wonderful Citrus is North America’s leading integrated grower, shipper and packer of fresh citrus, including clementines/mandarins, navel and Valencia oranges, lemons, limes, grapefruits, and other citrus varieties. Wonderful Citrus farms more than 74,000 acres of fresh citrus and has supplier relationships around the world to ensure a year-round supply. Our citrus can be found in all channels of distribution, with our consumer brands most visible in the produce department of grocery stores across the globe under our flagship consumer brands, Wonderful Halos Mandarins, Wonderful Seedless Lemons, and Wonderful Sweet Scarletts Texas Red Grapefruit. Job Description Overview: To serve as the area specialist in safety and security by developing and carrying out procedures in collaboration with the local facility operations that will effectively control incident rates and health exposures in the company and minimize overall work related and site incidents. Here's what you'll do: • Responds to and investigates work related injuries. Notifies management of pertinent details., • Guides and assists plant personnel with all levels of safety and health opportunities., • Reviews facility incident trends and makes recommendations for implementation of corrections., • Supports internal forklift and aerial lift certification processes., • Interact with 3rd party organizations to fulfill project completion goals safely and effectively., • Collaborates with worker’s compensation Department on work related injury information., • Supports various safety training programs., • Validates incident report information for accuracy and completeness., • Investigates incidents with cross functional team members to determine root cause and effective corrective actions., • Monitors safety programs, policies, and procedures that meet OSHA and other applicable laws and regulations., • Assists with the development and execution of programs as listed above., • Conducts scheduled audits to determine workplace hazards and assists in development of corrective actions., • Utilizes Oracle application to create supply requisitions and work orders for repairs., • Conducts exterior security patrols., • Perform and document security equipment inspections as assigned., • Respond to calls for service including alarm and incident response as well as routine calls for service such as locking and unlocking doors., • Maintains a complete understanding of site emergency procedures., • Report security activities and make necessary adjustments and/or recommend improvements., • Participate in daily pass-downs to next shift specialist., • Support special events with traffic control or other necessary Security items., • All other duties as assigned by the Safety Manager.Qualifications Here's what you'll bring to the table: • High School Diploma required. ( AA/AS Preferred ), • Proficiency in computer usage, email, MS Office (Word, PowerPoint, Excel, and Outlook), • Understanding of packinghouse/warehouse processes and flow operations., • Well-developed observational and analytical skills., • Effective verbal and written communications skills., • Able to work flexible schedules/shifts as needed for 7-day operation., • Proven skills for planning daily/weekly tasks and adapting to competing demands., • Strong skills developing relationships across all levels and functions., • Knowledgeable in the application of OSHA/CALOSHA regulations., • Knowledgeable of the worker’s compensation process., • Experience in administering personnel policies and procedures., • Must project a positive and professional image., • Communicate effectively orally and in writing., • Must be able to make decisions within scope of job., • Be readily receptive of additional training for the broadening of skills., • Must be able to work autonomously within scope of job duties. Additional Information Wonderful's dedication to you: • Competitive benefits package including Medical, Vision, Dental, 401k, • Continued training and generous Education Reimbursement Program, • Paid sick, vacation and holiday time Wonderful Citrus is part of The Wonderful Company, a privately held $6 billion global company dedicated to harvesting health and happiness around the world. Its iconic brands include FIJI Water, POM Wonderful, Wonderful Pistachios, Wonderful Halos, Wonderful Seedless Lemons, Teleflora, and JUSTIN and Lewis Cellars wines. The Wonderful Company’s connection to consumers has health at its heart and giving back in its DNA. To learn more about The Wonderful Company, its products, and its core values, please visit wonderful.com, or follow The Wonderful Company on LinkedIn, Facebook, and Instagram. To learn more about the company’s corporate social responsibility impact, visit csr.wonderful.com. Wonderful Citrus and The Wonderful Company is an Equal Opportunity Employer and with opportunities for advancement. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected categories. EEO is the law - click here for more information I'm interested Wonderful Giving | YOU CAN MAKE A DIFFERENCE EEO is the law - click here for more information

Job Description Lassonde Pappas & Co. is a US Leader in beverage manufacturing dedicated to our team members, customers and consumers satisfaction. We remain committed to our small-town roots and rural values. Hardworking and caring are qualities that make our teams special. Since 1942, we’ve been producing delicious products for our customers across the country! To provide the best for our customers, we focus on building the best team by creating and advancing an inclusive environment amongst our diverse workforces. If you’re passionate about customer satisfaction, reliable, and committed to being and doing better, join us! We value each of our employees’ total wellbeing. To support employees in all stages of their wellness journey, we have a robust benefits program including medical, dental, and vision coverage options, growth and development potential, along with 401-K, Life & Disability Insurance, PTO, Tuition Reimbursement, Health Fairs, Gym Membership Discounts, and so much more! Pay Range for this position is: $103,000-$155,000 plus annual bonus, depending on experience and geographical location. POSITION SUMMARY The Senior Cost Analyst reports to the Director of Operational Analytics and is based out of our Cherry Hill, NJ location. This individual will be responsible for providing financial insight and analysis to support cost management, budgeting, forecasting, and strategic decision-making. This role will focus on managing the costing process while supporting manufacturing and operational analytics. The Senior Cost Analyst partners with manufacturing, operations, supply chain, cost accounting, margin management, and the finance teams to achieve the overall strategic plans of Lassonde Pappas & Co. Primary Responsibilities include: • Management of costing processes, including standard costs and multiple simulated cost sets used for various business analyses, • Develop various costing models to support product costing, financial analysis, and margin management strategies, • Analyze variances between standard, actual, and forecasted costs; identify root causes and recommend corrective actions, • Assists with budgeting, forecasting, and business planning, • Support monthly, quarterly, and year-end close processes by preparing various analyses, reports, and presentations, • Assist with the evaluation of various business investments and financial opportunities, • Develop tools and management reports to improve financial processes and decisions, • Performs other related duties as required and assigned EDUCATION AND EXPERIENCE Minimum Required Qualifications • Bachelor’s degree in Finance, Business, Accounting, Economics, or related field, • 5+ years of cost accounting, financial analysis, or cost analysis, preferably in manufacturing or supply chain-focused industries, • Experience in cost analytics and plant analytics, • Experience using Business Intelligence Tools, • Strong knowledge of cost accounting related to manufacturing operations, • Ability to operate independently and self-manage projects, • Highly organized and process oriented with strong reasoning abilities, • Strong understanding of accounting and financial principles, • Advanced Excel and financial modeling skills; ERP system experience (QAD) preferred; proficiency in MS Word and PowerPoint, • Ability to identify, research, and create Excel models to solve problems, • Ability to develop graphs/charts for various presentations and business reviews, • Attention to detail and accuracy, • Able to manage multiple projects simultaneously, • Effective communicator, with the ability to collaborate across divisions and with all levels of the organization, • Ability to travel up to 10% Additional Preferred Qualifications • Experience with QlikView or other BI tools, • Experience with QAD or other ERP systems, • Experience in the manufacturing and/or food and beverage industry, • Ability to direct, coach, and train others, • Consultative, influential, strategic thinking, and problem-solving skills PHYSICAL REQUIREMENTS & WORKING CONDITIONS This position requires sufficient physical ability to work in a typical office setting, driving a motor vehicle and occasionally working in the field. FREQUENT: sitting, upward and downward flexion of neck; fine finger dexterity and light to moderate finger pressure to include extended periods of keyboard and mouse use, side-to-side turning of neck, walking, standing, bending and stooping, pushing/pulling, twisting at waist, moderate wrist torque to twist equipment knobs and dials. OCCASIONAL: squatting, kneeling, reach above and at shoulder height, moderate grasp to manipulate reference books and manuals; lifting objects weighing 20 – 35 lbs. from below waist to above shoulders and transporting distances up to 50 feet. VISION: Ability to see in the normal visual range with or without correction. HEARING: Ability to hear in the normal audio range with or without correction. This job description is not intended to contain a comprehensive list of the responsibilities that are required to successfully perform in this position. Other duties as assigned are part of every job description. The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals to perform the essential job functions. Lassonde Pappas & Co., Inc provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description The Associate Director is responsible for Facilities Management – Operations & Maintenance. This includes managing facility space up to 2 million square feet (including hospital and academic), operating expense budget up to $15,000,000 (including utilities), and employees (direct and indirect) up to 40. Responsibility includes tactical plant operations and maintenance. Directs, plans, coordinates and is administratively and professionally responsible for the proper operation and maintenance of uninterrupted light, heat, cooling, power, water, and monitoring systems of all Hospital/University buildings and services. Ensures the Hospital/University facilities overall condition and appearance are maintained professionally. The Associate Director has fiscal responsibility for development and management of operating budgets and deferred maintenance capital for all departments and costs associated with in his/her areas of responsibility. Manages schedules, budgets (operating expense and provides direction for capital) and ensures quality control for departmental responsibilities. Has overall administrative and professional responsibility for the safe and efficient function and operation of all Hospital/University buildings, equipment, systems and grounds. Manages the interaction between the institution and the various outside regulatory agencies providing oversight to the institutions activities (TJC, PA Dept. of Health, City L&I, AAALAC, etc.). Supports Enterprise campuses and Regional responsibilities, as needed. EDUCATIONAL/TRAINING REQUIREMENTS: Bachelor’s degree in related field preferred. (Equivalent experience shall be taken into account rather than degree) Professional engineering license is preferred. Shall have one professional association with ASHE, NFPA, APPA, IEEE or similar industry. Formal management training is preferred. _________________________________________________________________________ CERTIFICATES, LICENSES, AND REGISTRATION: PE, Certified Professional Energy Manager (PEM) , APPA Certified Educational Facilities Professional (CEFP). and/or ASHE (CHFM), One certification or license is preferred. Certification is required within two years of hire. EXPERIENCE REQUIREMENTS: 5-10 years of experience in Healthcare Facilities Management (equivalent role to job description). ________________________________________________________________________ * • Develops and demonstrates a working understanding of client needs (patients/clinical units/research, etc.) as well as organizational risk. Uses this knowledge to drive continuing compliance, service level improvement, added value to client environment and satisfaction, minimized business impact of operational interruptions, and financial responsibility for requested service levels. Requires the ability to manage multiple priorities and adjust as these needs change., • Establish and maintains direct working relationships with key departmental representatives, area managers and staff as the leader of the team responsible and accountable for Facilities Performance and Customer Service. Provides direct support to the hospital and university through close interaction with Administration and Facilities Services staff. Conducts regular evaluations of clinical areas, research labs, educational and support departments to ensure that client needs are met., • Monitors overall condition of all buildings related to academic, healthcare and research missions of the institution including all systems, equipment and grounds for safety and efficiency. Monitors and maintains compliance with state and local codes, TJC compliance and insurance compliance, and through periodic and documented inspections. Works in support of the next level of management and all Facilities staff, ensuring compliance with all requirements of regulatory agencies including continuous readiness for TJC, PADOH, AAALAC and all other regulatory site visits., • Meets with appropriate state, local, and all other survey and inspection personnel referred by Administration to review surveys and corrective responses. Reports to the Director, Sr. Vice President for Facilities and Campus Planning and Associate Vice President for Facilities Design and Construction on presence and results of all such inspections and surveys with any requirements or recommendations for corrective action., • Working with the Director, Sr. Vice President for Facilities and Campus Planning, AVP of Facilities Design and Construction, participates in the planning of future development of physical facilities and systems. Developing, reviewing and recommending approval of plans for equipment and systems retrofit, repair replacement or additions to be carried out by institutional personnel and/or outside contractors., • Responsible for readiness, functioning and maintenance of all hospital/university life safety systems (fire alarms, sprinkler systems, emergency generators, etc.). Delegating routine repair and maintenance of systems to Managers/Supervisors and contracting for periodic inspection and special maintenance of detection and control systems., • Optimizes the use of the Work Order / Preventive Maintenance system to meeting the need of the institution to provide a meaningful management tool for all levels of FM management as well as efficiently schedule and distribute the workload. In addition, it must connect with the end user providing a user friendly means to report problems or needs and provide status feedback throughout the process. Use of the system reports for Hospital and University clients to provide feedback from which actions can be taken to improve outcomes both within and outside of the FM department., • Responsible for Human Resource related issues of direct and indirect staff including employment, termination, suspension, training, grievances and promotions. Developing work schedules and assignments for his / her personnel., • For union locations, supports the negotiation, application and management of the collective bargaining agreement between Jefferson and the Union., • Demonstrates commitment to our core values of excellence and innovation, integrity and respect, teamwork and communication., • Working with the Facilities Administration staff, participates in the planning of future development of physical facilities and systems. Developing, reviewing and recommending approval of plans for equipment and systems retrofit, repair replacement or additions to be carried out by institutional personnel and/or outside contractors., • Supports and optimizes the use of the Work Order / Preventive Maintenance system to meeting the need of the institution to provide a meaningful management tool for all levels of FM management as well as efficiently schedule and distribute the workload. In addition, it must connect with the end user providing a user friendly means to report problems or needs and provide status feedback throughout the process. Use of the system reports for clients to provide feedback from which actions can be taken to improve outcomes both within and outside of the FM department., • Responsible for Human Resource related issues of direct and indirect staff including employment, termination, suspension, training, grievances and promotions. Developing work schedules and assignments for his / her personnel., • Assumes a leadership role in safety and the prevention of injury. Understands emergency procedures and demonstrates appropriate response. Involves staff in the identification of system issues and development of corrective actions. Educates, involves and supports staff in error/event reporting. Problem identification, problem resolution, and compliance with all licensing/regulatory bodies, as applicable., • Supports and participates in the Corp on-call rotation.Company DescriptionNationally ranked, Jefferson, which is principally located in the greater Philadelphia region, Lehigh Valley and Northeastern Pennsylvania and southern New Jersey, is reimagining health care and higher education to create unparalleled value. Jefferson is more than 65,000 people strong, dedicated to providing the highest-quality, compassionate clinical care for patients; making our communities healthier and stronger; preparing tomorrow's professional leaders for 21st-century careers; and creating new knowledge through basic/programmatic, clinical and applied research. Thomas Jefferson University, home of Sidney Kimmel Medical College, Jefferson College of Nursing, and the Kanbar College of Design, Engineering and Commerce, dates back to 1824 and today comprises 10 colleges and three schools offering 200+ undergraduate and graduate programs to more than 8,300 students. Jefferson Health, nationally ranked as one of the top 15 not-for-profit health care systems in the country and the largest provider in the Philadelphia and Lehigh Valley areas, serves patients through millions of encounters each year at 32 hospitals campuses and more than 700 outpatient and urgent care locations throughout the region. Jefferson Health Plans is a not-for-profit managed health care organization providing a broad range of health coverage options in Pennsylvania and New Jersey for more than 35 years. Jefferson is committed to providing equal educational and employment opportunities for all persons without regard to age, race, color, religion, creed, sexual orientation, gender, gender identity, marital status, pregnancy, national origin, ancestry, citizenship, military status, veteran status, handicap or disability or any other protected group or status.Nationally ranked, Jefferson, which is principally located in the greater Philadelphia region, Lehigh Valley and Northeastern Pennsylvania and southern New Jersey, is reimagining health care and higher education to create unparalleled value. Jefferson is more than 65,000 people strong, dedicated to providing the highest-quality, compassionate clinical care for patients; making our communities healthier and stronger; preparing tomorrow's professional leaders for 21st-century careers; and creating new knowledge through basic/programmatic, clinical and applied research. Thomas Jefferson University, home of Sidney Kimmel Medical College, Jefferson College of Nursing, and the Kanbar College of Design, Engineering and Commerce, dates back to 1824 and today comprises 10 colleges and three schools offering 200+ undergraduate and graduate programs to more than 8,300 students. Jefferson Health, nationally ranked as one of the top 15 not-for-profit health care systems in the country and the largest provider in the Philadelphia and Lehigh Valley areas, serves patients through millions of encounters each year at 32 hospitals campuses and more than 700 outpatient and urgent care locations throughout the region. Jefferson Health Plans is a not-for-profit managed health care organization providing a broad range of health coverage options in Pennsylvania and New Jersey for more than 35 years. \r\n\r\nJefferson is committed to providing equal educational and employment opportunities for all persons without regard to age, race, color, religion, creed, sexual orientation, gender, gender identity, marital status, pregnancy, national origin, ancestry, citizenship, military status, veteran status, handicap or disability or any other protected group or status.

Job DescriptionLHH Recruitment Solutions is partnering with a Camden, NJ-based organization to hire an Assistant Controller. This role focuses on manufacturing cost accounting, ERP system optimization, and inventory management, while working closely with operations to improve costing accuracy, streamline financial processes, and ensure timely completion of month-end close and audit activities. Assistant Controller (Cost Accounting & ERP Focus) Job Type: Full?time, Direct Hire Work Location: Onsite (in person) Compensation: $110,000-$115,000 base salary (DOE) + benefits (401(k) with match, health, dental, vision, life, PTO, tuition reimbursement) Core Responsibilities • Own cost accounting routines: standard cost updates, BOM/routing validations, overhead allocations, and PPV analyses., • Lead monthly close tasks for COGS and inventory; reconcile sub?ledgers to the GL; perform margin and variance analysis., • Prepare GAAP?compliant financial statements and management reporting packs., • Optimize ERP workflows (AP/AR/GL, inventory, fixed assets); document processes and controls., • Strengthen internal controls; perform walkthroughs and remediation where needed., • Support budgeting/forecasting cycles; build models for production volumes, labor/overhead rates, and material usage., • Coordinate external audits; own audit schedules for inventory, revenue, and expenses., • Guide cross?functional teams on financial impacts of operational changes; recommend process improvements., • Participate in 1-3 annual physical inventory counts; support cycle count programs., • Other duties as assigned. Qualifications, • Bachelor's in Accounting, Finance, or related discipline., • 4-5+ years of accounting experience with manufacturing cost accounting exposure., • Advanced Excel (index?match/XLOOKUP, pivot tables); ERP proficiency (implementation or optimization experience a plus)., • Strong understanding of GAAP, inventory accounting, and internal controls., • Clear communicator with excellent attention to detail and deadline discipline. Preferred Attributes, • Experience translating operational data into financial outcomes; continuous improvement orientation., • Leadership potential; ability to influence non?finance stakeholders. Physical & Work Environment, • Ability to step, climb, sit for long periods, type, and lift as needed., • Work may occur in a cold, refrigerated plant environment. Pay Details: $110,000.00 to $115,000.00 per year Search managed by: Cassandra Coakley Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description BIM/MEP MECHANICAL DESIGNER - HYBRID POSITION We are seeking a Mechanical Designer to become a part of our growing team at our Rancocas, NJ division. You will collaborate with engineers and project teams to create design concepts using various software programs, such as AutoCAD, Inventor, Navisworks, Plant 3D, etc. Responsibilities: • Participate in design reviews and provide input on manufacturability, materials and performance., • Ensure designs comply with project specifications., • Prepare layouts, assemblies, detail drawing and bills of materials (BOMs) for manufacturing or construction., • Collaborate with engineers and project teams to develop design concepts and translate them into technical drawing., • Prepare construction documents, including plans, sections and details for permitting and construction., • Revise and maintain mechanical and fabrication drawings based on engineering sketches, site measurements and field changes., • Maintain organized documentation of all designs, revisions and calculations. Qualifications: • Steel mill industry experience and working in a chemical plant or paper mill is strongly preferred., • Experience using AutoCAD, Inventor, Navisworks and Plant 3D., • Previous experience in mechanical drafting, manufacturing or other related fields EMSCO, Inc. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status or disability status. Company DescriptionEMSCO Inc. is one of the Inductotherm group of companies, more than 50 technology-based firms worldwide. We are the largest service company for the induction melting and heating industries in North America. Our small company environment provides large company benefits, including employment stability and opportunities for advancement.EMSCO Inc. is one of the Inductotherm group of companies, more than 50 technology-based firms worldwide. We are the largest service company for the induction melting and heating industries in North America. Our small company environment provides large company benefits, including employment stability and opportunities for advancement.

Job Description Holtec International seeks qualified applicants for the Valve Engineer position in its Systems Engineering department with the Company’s Corporate Engineering division located at the Company's KPS Technology Campus in Camden, NJ. This department is the company's center of excellence in the field of system engineering, supporting a number of Holtec subsidiaries including SMR, LLC, which is engaged in designing Holtec’s flagship small nuclear reactor. Pipe-Flo, HTRI, MathCad are amongst the most widely used codes in this department. Valve Engineers are engaged in the development of requirements and specifications for a variety of valves for various systems in nuclear power plants. If assigned to work in the SMR-300 program, the associate will support engineering and licensing requirements, leading to the licensing and construction of the first SMR-300 plant. Similar positions are also open at the Company’s positions are open in North Pittsburgh, PA, Covert, MI and Buchanan, NY locations. Minimum Qualifications: • BS in an engineering discipline., • In-depth knowledge of valve design, operation, maintenance, and testing considerations/procedures., • Experience in developing and/or reviewing valve procurement specifications for nuclear power plants., • Familiarity with valve maintenance impacts on power plant outages., • Familiarity with ASME BPVC, valve and actuator design standards, API, MSS, and nuclear quality assurance requirements (e.g., NQA-1)., • Knowledge of NRC regulations related to mechanical components in nuclear facilities., • Excellent technical writing, interpersonal and effective communication skills. Salary range: $98,000 - $128,000 Holtec International offers a competitive benefits package to eligible associates, which includes: • Medical, dental, and vision insurance, • 401(k) retirement plan with company match, • Paid time off and 11 Paid Holidays, • Company-paid life and AD&D insurance, • Employee Assistance Program, • Wellness resources and voluntary benefits Powered by JazzHR SKXF4dLQX2

Job Description Holtec International, a turnkey supplier of technologies for the nuclear and sustainable energy industries, is seeking to add an experienced mechanical/civil/structural engineer/analyst to its Applied Mechanics Group with opportunities to contribute to Holtec’s first of a kind small modular reactor (SMR) design. Come join a growing multidisciplinary team of engineers designing the next generation nuclear power plant. The senior engineer would be called upon to analyze metallic, reinforced concrete and soil-subgrade supported structures. The analyses may support engineering and licensing requirements, leading to the licensing and construction of SMR-300 plants across the globe. The engineer will use and learn various methods and software to perform the analyses. SPECIFIC AREAS OF RESPONSIBILITY • Execute and document analyses for a variety of structures, systems and components (SSCs), • Review available concept designs based on an ambiguous set of requirements, then develop them into mature designs by critical thinking, literature research, interacting with members from other disciplines and vendors, and any analyses as permitted by project milestones, • Support the preparation of design deliverables, presentations, and communicate design progress in stakeholder meetings, • Static and dynamic finite element analyses (FEA) using ANSYS, • Drop and impact (e.g., missile and aircraft) analyses and target response using LS-DYNA, • Simulation of the seismic response of freestanding structures in air or submerged in water, • Static and dynamic analyses of large reinforced concrete or steel-concrete composite structures, • Soil-structure interaction (SSI) and fluid-structure interaction (FSI) analyses, • Applicant must possess a BS in Mechanical/Civil/Structural Engineering with a minimum of 6 years of experience. MS will count for 2 years of experience and Ph.D. will count for 4 years of experience (experience from MS and Ph.D. cannot be combined), • Familiarity with industry standards and design codes such as ASME, ASCE, ACI and AISC, • Must possess excellent credentials in principles of solid mechanics, • Industrial experience in the latest stress analysis codes such as ANSYS, LS-DYNA, and STAAD.Pro, • Prior nuclear industry experience including interactions with NRC or other regulatory authorities, • Experience in seismic and stress analysis of pressure vessels and rotating equipment, • Experience in modular design development of SSCs Powered by JazzHR CVzKisncZJ

Job Description Legal Assistant / Paralegal - Philadelphia, PA Firm: A nationally recognized law firm specializing in litigation with over 200 attorneys across multiple U.S. offices. Role: As the Legal Assistant/Paralegal, you will be responsible for providing support to attorneys and clients, conducting legal research, drafting legal documents, organizing and maintaining case files, and assisting with administrative tasks. Responsibilities: • Assisting attorneys with case preparation and research, • Drafting legal documents such as pleadings, briefs, and correspondence, • Organizing and maintaining case files, including electronic filing systems, • Conducting legal research using online databases and other resources Qualifications: • 3+ years of Legal Assistant/Paralegal experience within a law firm, • Paralegal certificate or degree preferred, • Prior experience working in a law firm or legal department, • Base Salary: $80-85k+, commensurate with experience., • Additional Compensation: Annual performance-based bonus. #legalassistant #philadelphia Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focuses on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Production Coordinator is responsible for leading and coordinating daily production activities to ensure safe, efficient, and compliant operations. This role works closely with operations, quality, technical, supply chain, and maintenance teams to resolve process issues, maintain production schedules, and meet quality and EHS expectations. The coordinator also drives process improvements, supports annual shutdown planning, and contributes to continuous improvement initiatives across the production area. This role provides leadership and development opportunities for team members, fostering a culture of safety, accountability, and operational excellence. In addition, this position manages process safety and personnel performance. Core Responsibilities: • Ensure all production equipment is operational, clean, and ready for scheduled processes, with accurate bills of materials, consumables onsite, and supporting documentation (batch records, assays, packaging requests) provided prior to start., • Collaborate with Process Engineering, EHS, QC, QA, Regulatory, and Production to ensure batch records are accurate, approved, issued on time, and that raw materials are sampled, tested, and released before batch start., • Provide guidance and training to Production shifts, update Standard Work Plans, track cycle times and yield, implement process improvements, and lead troubleshooting for equipment and production issues., • Organize and lead investigations of production deviations, EHS events, and documentation errors, managing open production TRs and ensuring batch records close within 7 days., • Monitor facility performance and drive improvements in productivity KPIs while championing Continuous Improvement initiatives, including Kaizen blitzes, 5S, and area audits., • Review, revise, and maintain Production Work Instructions, manufacturing batch records, deviations, and SOPs within the Veranova Quality system; support tech transfers, scale-up, and validation projects as needed., • Represent Production in PHAs/PSSRs, daily L2 SQDCP meetings, and weekly planning meetings; update Production Readiness Reviews and communicate impacts to the business. Required • BS in Chemical Engineering, Chemistry or relevant technical degree w/ a minimum of 3 years’ manufacturing, project management, and/or product team experience in the pharmaceutical industry or, • BS degree in a non-technical discipline with a minimum of 7 years’ manufacturing, project management and/or product team experience in the pharmaceutical industry, • Advanced knowledge of Microsoft Office (Word and Excel), • Ability to lead and influence others, • Verbal/Non-verbal communication and technical writing, • Able to work with minimal to moderate oversight, • Occasional walking, standing for long periods of time while in labs/plant, reaching, handling, twisting, bending spine at waist when operating equipment Our Commitment: • Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies., • Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs., • Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs. Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice. #LI-Onsite