Trabajos product en Rochester, New York - Page 13Crear alertas

Job DescriptionDescription: Position Summary: The Senior Electrical Engineer will work cooperatively with Vuzix team members on the Electrical and other engineering disciplines to deliver complex circuit designs for smart glasses and head-mounted display (HMD) products. Vuzix values individuals that are self-motivated to solve challenges and have a can-do attitude. This position will also support the functions of the R&D – Electrical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Schematic design and PCB layout of digital circuits for smart glasses and head mounted display products., • Work with PCB fabrication and SMT vendors to produce finished PCBAs for prototypes., • Test and debug new hardware for both functional correctness and reliability criteria., • Produce technical documentation for requirements, testing, and validation of designs., • Work with cross-functional engineering teams to develop electronics for highly constrained products., • Participate in cross-discipline design reviews to optimize product implementation., • Meets required ISO 9001:2015 standards and necessary training based on the relevant Quality Objectives. Competencies: To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Bachelor’s degree in Electrical Engineering, Electrical & Computer Engineering, or equivalent technical field., • 6 years’ experience in a relevant technical field., • Strong written and verbal communication skills, including the ability to brief effectively to peers and leadership., • Experience with hardware design from concept to implementation., • Demonstrated experience implementing and debugging high-speed designs., • Understanding of hardware / software interfaces., • Experience with C programming language and microprocessor development., • Experience with Altium Designer for schematic capture and PCB layout, • Experience with soldering and board rework., • Experience analyzing and debugging complex hardware using test equipment such as oscilloscopes, logic analyzers, etc., • Experience working with a multidisciplinary team environment through all phases of product development from initial concept to production release Travel: Up to 5%, with willingness to travel to manufacturing partner locations internationally, if required. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable. Compensation: In compliance with Pay Transparency requirements, the salary range for this role in New York State is $90,000 - $150,000. This is not a guarantee of compensation or salary, as final offer may vary based on various factors including but not limited to experience and geographic location.

Job Description Title: Service Engineer Reports to: Service Expert Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Annual Base Salary Range: $83k (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job Description CNC PROGRAMMER Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Programmer. The CNC Programmer is responsible for generating programs for milling centers, turning centers and multi-tasking CNC equipment, while updating and managing CNC programs and manufacturing processes to consistently produce precision products. DUTIES & RESPONSIBILITIES • Use CAD skills to create work holding and fixturing layouts, program CNC machine tools using Solid Works and Mastercam Programming software, and create geometry as needed., • Generate programs for milling centers, turning centers and muti-tasking CNC equipment., • Update and manage CNC programs and manufacturing processes to consistently produce a precision product., • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Superior communication skills and ability to develop teamwork among staff; interface with department supervisors and machinists on a regular basis., • Must be diplomatic and possess good human interaction skills., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Ability to multitask using the appropriate level of priority setting., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Must be proficient with Solid Works and Mastercam., • Experience with Mazatrol and Fanuc a plus., • Must be proficient in Cutting Speeds and Feeds., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine tool., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • Minimum 5 years of experience. High School Diploma/GED required., • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $28.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Job Description Senior Associate, PCB Parts Designer – $59K–$110K + Every Other Friday Off (26 Extra Days Off/Year) + Full Benefits Strong benefits, extra time off built into your schedule, and the opportunity to contribute to advanced communication systems used in critical environments. Join a high-impact engineering team where you’ll support the design and development of PCB components used in next-generation radio communication equipment. This role blends ECAD design, component library development, and cross-functional collaboration to ensure high-quality, manufacturable designs. What you’ll do • Create and maintain schematic symbols and PCB footprints for ECAD libraries, • Develop copper pads, solder mask, and paste patterns using vendor datasheets and IPC standards, • Support PCB design efforts with accurate component data and layouts, • Review drawings and technical datasheets for dimensional accuracy, • Ensure designs meet manufacturing, fabrication, and assembly requirements, • Work with CAD/EDA tools to support new and existing product developmentWhat you bring, • Bachelor’s degree + 2+ years experience (or equivalent experience), • Experience with PCB design tools (Mentor PADS, AutoCAD, or similar), • Knowledge of SMT and through-hole components, • Understanding of mechanical dimensioning and tolerancing, • Strong attention to detail, • Familiarity with PLM tools (Agile, Teamcenter, etc.) is a plus

Job DescriptionCompany Description Eurofins Scientific is a network of independent companies providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work to ensure the products they supply are safe, their ingredients are authentic, and labelling is accurate. Eurofins is dedicated to delivering testing services that contribute to the health and safety of society and the planet, and to its corporate responsibility to protect the environment and ensure diversity, equity, and inclusion across the entire network of Eurofins companies. With over 50 laboratories and more than 40 service centers nationwide, Eurofins Environment Testing provides full-service environmental analysis across all 50 states. Our network supports public and private clients—including DoD, DOE, and municipalities—through robust logistics and continuous investment in people, technology, and infrastructure. We offer comprehensive testing for air, water, soil, sediment, tissue, and waste, covering a wide range of analytes including PFAS, metals, VOCs/SVOCs, radiochemicals, and more. Job Description Eurofins Environment Testing is searching for a Microbiology Analyst in Rochester NY Compensation is $18-22/hour (DOE) Schedule is Mon-Fri 8:00am- 5:00pm Job Description • Applies GMP/GLP in all areas of responsibility, as appropriate, • Demonstrates and promotes the company vision, • Regular attendance and punctuality, • Perform basic micro lab techniques/analyses and prepare media/cultures, based on job function, • Contribute to a small team of analysts using bacterial test systems (i.e. Total Coliform testing, E. coli testing, Total Plate Counts, MPNs, and Wastewater testing), • Assist in writing, reviewing and editing reports, protocols and SOP’s., • Train other staff members., • Efficiently carry out procedures necessary to complete each analysis with minimal supervision., • Meticulously maintain precise records of all analyses in accordance with good laboratory practice., • Culture and enumerate infectious bacterial pathogens using routine microbiological techniques., • Enter data into LIMS computer system, • Maintain/calibrate equipment (Incubators, water baths, refrigerators, etc.), • Prepare and wash glassware, • Performs other duties as assigned (Wet Chemistry, Sample Login, Courier, etc.), • Receives and unloads incoming samples or consignments in accordance with DOT regulations and verifies receipt against Chain of Custody (COC), matches it to the corresponding quote and notes discrepancies daily. Verifies that COC’s are accurate, complete, and correct and seeks resolution for those that are not., • Logs samples into Lab Management System daily to assign a lot number for tracking purposes and distributes paperwork to Project Managers., • Labels samples so they may be identified by the lot number assigns and delivers samples to appropriate labs for analysis daily., • Prepares bottle kits daily to be shipped to clients to collect samples and return for analysis in accordance with established procedures including EPA and DOT requirements., • Forwards samples to other laboratories in accordance with DOT regulations as needed to run tests that are not performed at that location., • Disposes of spent samples, waste and other potentially hazardous materials in accordance with established procedures., • Monitors freezer and cooler temperatures daily to confirm that the readings are within SOP guidelines., • Cleans and organizes the departments/labs daily to promote a clean, safe work environment and smoother flow of daily operations., • Maintains and promotes safety and conducts all operations in a safe and environmentally compliant manner., • Stocks and supplies inventory daily and assists with inventory of supplies to maintain proper quantity of materials to perform tasks appropriately., • Performs splits and composites as needed upon request., • May perform courier duties as necessitated to support lab and client needs., • Will be compliant with all driver procedures, certification, and Company driver policies., • Must be willing to be on-call during non-business hours in order to perform non-routine sampling, delivery, setup of analyses, and readback of tests., • Assists in maintenance of walk-in coolers to facilitate locating samples., • Ships empty coolers back to clients and other Eurofins Laboratories. Logs all outgoing coolers in order to maintain a detailed inventory of all coolers., • Maintains all company vehicles for sample pickups and deliveries as needed., • Conducts all client interaction in an appropriate and professional manner., • Bottle order prep duties, • Computers, word processing software and database software, • Experience with Microbiological Laboratory and testing procedures, • General mathematics, • Basic composition, spelling, grammar, punctuation, • Strong work ethic, organize work and pay attention to detail, • Computers and basic office equipment, • Computerized shipping systems, • Personal protective equipment, • Strong computer, scientific, and organizational skills, • Excellent communication (oral and written) and attention to detail, • Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude, • Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policiesQualifications Basic Minimum Qualifications: • Biological degree required with minimum of 4 credit hours of Microbiology, • Department of Transportation (DOT) Certificate may be required for shipping hazardous chemicals within 90 days of date of hire., • Additional client or location licenses or certifications may be required in order to support client and operational needs., • May drive for long periods, • Authorization to work in the United States indefinitely without restriction or sponsorship, • Must have a valid US drivers license without recent incident to drive company vehicle as needed, • Ability to lift 50lbs Perform other duties as assigned "All offers of employment are contingent upon a successful completion of a pre-employment drug screen and background check." Additional Information Please note - Eurofins Environment Testing (USA) provides a compensation range for informational purposes, the actual base salary may vary based upon, but not limited to, relevant experience and skill set, base salary of internal peers, business sector, and geographic location. As a Eurofins employee, you will become part of a company that has received national recognition as a great place to work. We offer excellent full-time benefits including comprehensive medical coverage, life and disability insurance, 401(k) with company match, paid holidays, paid time off, and dental and vision options. We support your development! Do you feel you don’t match 100% of the requirements? Don’t hesitate to apply anyway! Eurofins companies are committed to supporting your career development. We embrace diversity! Eurofins network of companies believe in strength and innovation through diversity, being an Equal Opportunity Employer. We prohibit discrimination against employees or applications based on gender identity and/or expression, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of Eurofins companies unique. Sustainability matters to us! At Eurofins, we believe sustainability is at the heart of everything we do. Guided by our vision to be the Global Leader in “Testing for Life,” our mission to contribute to a healthier and safer world, and our core values, we are building a strong foundation for Environmental, Social, and Governance (ESG) initiatives. Eurofins’ commitment to sustainability begins within our own companies through a shared responsibility to people and the planet. With climate change posing an imminent threat, Eurofins and its many companies recognize their duty to proactively reduce or offset the environmental impact of essential operations while also helping our clients do the same—serving as a true ESG Enabler. Find out more in our career page: Company description: Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in discovery pharmacology, forensics, advanced material sciences and Eurofins Scientific 2/2 March 2023 agroscience contract research services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 35 years, Eurofins has grown from one laboratory in Nantes, France to 61,000 staff across a decentralised and entrepreneurial network of ca. 900 laboratories in 61 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2022, Eurofins generated total revenues of EUR 6.7 billion, and has been among the best performing stocks in Europe over the past 20 years. We do not offer Visa Sponsorship for this role. Eurofins is a M/F, Disabled, and Veteran Equal Employment Opportunity and Affirmative Action employer. Eurofins USA Environment Testing is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description Location: Hire type: Shift: Pay Range: PFISTERER NORTH AMERICA, INC Position Title: CNC Lathe Operator/Set Up – 3rd shift 10pm-6:30am Location: Rochester, NY 14624 Job Type: Full-time, Monday – Friday, Saturday as needed Exempt Status: Non-exempt Reports to: Head of North American Operations Wage Range: $30.00 - $37.00 / Hour Pfisterer North America is the US subsidiary of a 100-year-old family-owned company based in Germany that is a global leader in electrical connection technology and high voltage insulation. We are professional, agile and our goal is to offer a supportive culture and competitive pay & benefits. We are introducing several new product lines to North America as part of our global expansion, and are seeking several additions to our veteran team. POSITION SUMMARY: Responsible to the set up and operation of CNC lathe machines. Senior position with responsibility of loading programs and troubleshooting for accurate production of quality products. ESSENTIAL DUTIES AND REPONSIBILITIES: 1. Set up and operate CNC lathe machines to perform precision machining operations, 2. Select and install tooling, fixtures and attachments for efficient and accurate machining, 3. Monitor machine operations to ensure quality and adherence to specifications, 4. Perform routine maintenance on machines to ensure optimal performance, 5. Inspect finished products for accuracy and conformance to specifications, 6. Troubleshoot and resolve issues that may arise during the machining process. ESSENTIAL QUALIFICATIONS/EXPERIENCE: 1. 5 years of experience operating CNC lathe machines in a manufacturing or production environment, 2. Strong knowledge of basic math and measurement tools, 3. Understanding of tooling concepts and selection, 4. Knowledge of quality control processes in a machining environment PHYSICAL DEMANDS 1. Ability to lift up to 50 pounds unassisted., 2. Standing, bending, lifting throughout the day, 3. Fast paced environment, occasionally, 4. Work performed in an indoor climate BENEFITS · 401k · 401k match · Health insurance · Health savings account · Dental insurance · Vision insurance · Life insurance · Paid time off

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. About the Role: Our Mold Repair Manager is a key driver in the improvement of manufacturing processes, maintenance of production molds, and refurbishment of molds with the goal of achieving continuous improvement in quality, cost and safety. In addition, our Mold Repair Manager supports the overall site in the achievement of key performance metrics through the effective, proactive, preventative maintenance of tooling by implementing robust preventative maintenance programs, testing methods, equipment, and tools. This individual is also responsible for the staffing of the department, and mentoring/development of the existing team. What You’ll Be Doing: • Manage and coordinate the daily activities of the Mold Repair department to meet the production needs of manufacturing., • Direct, coach, and counsel Mold Repair Technicians to do effective mold repairs., • Work with Plant Management to manage internal resources effectively, taking into consideration various priorities, schedules and costs., • Maintain, monitor and repair, as needed, all tools to ensure that machines and mechanical processes continue to run smoothly, or the physical conditions of machine molds, tools, and parts are production ready and do not deteriorate., • Recommend measures to improve production methods, equipment performance, and the quality of product., • Maintain inventory of all tooling and tooling components; spare stock mold components and mold sprays; and fragile, perishable mold components to decrease possibility of downtime., • Responsible for all changeover parts and slide changes on approved tooling., • Monitor critical to functions dimensions documented on CAD drawings., • Actively participate in daily manufacturing meetings to provide updates on all jobs., • Responsible for completion of accurate time sheets for payroll., • Assess and determine need for outsourced support and coordinate appropriately., • Responsible for all performance evaluation activities for employees under your supervision. We would love to hear from you if: Education and/or Experience: High school diploma or general education degree (GED); Minimum of 10-15 years of experience in the tool-making field. Must have completed required coursework in the field. Computer Skills: Proficient with Microsoft Office Suite; Ability to learn new software as needed. Why You’ll Love Working for Century Mold: • We reward our employees. The salary range for this position is market competitive and is based on relevant years of experience and skills. Employees may qualify for a bonus program in addition to base salary; bonus amounts are determined based on company and individual performance., • We care about our employee’s well-being. In addition to direct compensation, we also offer a robust array of benefits to our employees; these include medical insurance, dental, vision, life insurance, as well as other great benefits to support your well-being. We also support our employees by offering 401(k) matching. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job Description LASER SET-UP OPERATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a Laser Set Up/Operator. The Laser Set Up/Operator is responsible for the set up and observation of lasers to verify the accuracy of the machine settings and to detect the malfunction or out-of-tolerance operation, by using precision measuring instruments such as micrometers and calipers. Additionally, the Laser Set Up/Operator is responsible for the loading, unloading of the laser and manual deburring of parts. DUTIES & RESPONSIBILITIES • Follows directions and produce required quantity of parts, • Follow all safety rules regarding machine operation and proper guarding, • Responsible for taking care of routine machine maintenance and keeping work area in neat condition, • Debur, • Set up job according to specifications or work order, • Move raw material to machines for finishing, • Create release of lasered parts from stock material by shaking, • Move finished parts to the next operation, • Use prints to set up machine for production, • Shear material, • Move material up to 50 pounds, • Assist in the training of new employees SKILLS & QUALIFICATIONS -With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved -Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes -Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating -Ability to understand and carry out oral and written directives -Ability to work well under pressure, to adhere to deadlines and the ability to be flexible -Thorough operational knowledge and skills of specific equipment to be operated, including laser equipment -Ability to operate assigned equipment safely and efficiently -Ability to keep record of time spent and material used -Ability to use precision measuring tools, such as calipers -Ability to read drawings and blueprints, and be familiar with common machine tools -Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals JOB BENEFITS • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $24.00 - $32.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Job Description CNC OPERATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Operator. The CNC Operator is responsible for the observation of machines to verify the accuracy of the machine settings and to detect malfunctions or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Operator is responsible for the controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling and deburring and the completion of first piece and in-process inspections. DUTIES & RESPONSIBILITIES: • Observes CNC Mill or CNC Lathe machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and dial caliper., • Maintain a clean machine and work area., • Controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling and deburring., • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes, • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating, • Ability to understand and carry out oral and written directives, • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Thorough operational knowledge and skills of specific equipment to be operated, • Ability to operate assigned equipment safely and efficiently, • Ability to keep record of time spent and material used, • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers, • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $17.00 - $29.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Job Description Job Summary: The Chief Engineer – Metrology at Syntec Optics serves as the technical authority for all optical measurement systems and methodologies. This role leads the development and deployment of advanced metrology solutions to ensure precise characterization of optical components and assemblies, supporting high-performance applications in aerospace, defense, medical, and semiconductor industries. The position requires deep expertise in interferometric measurement, surface metrology, active alignment, and system-level optical performance validation. Essential Duties and Responsibilities: • Lead the metrology engineering strategy across optical fabrication, coating, and assembly, • Define best-in-class measurement methods for high-precision optical components and systems, • Oversee and optimize advanced metrology equipment, including:, • Zygo interferometric scopes and systems, • Interferometers for transmitted and reflected wavefront measurement, • Profilometers for surface form and roughness characterization, • Develop and standardize measurement techniques for:, • Surface irregularity and wavefront error, • Optical element centration and alignment tolerances, • Active alignment processes with real-time measurement feedback, • Lead system-level optical performance validation, including:, • Sensor quality assessment, • MTF (Modulation Transfer Function) measurement, • Distortion characterization and correction analysis, • Architect, design, and deploy custom optical testers and automated metrology systems, • Establish and manage reliability testing protocols for optical systems, ensuring durability under environmental and operational stress conditions, • Define calibration processes, measurement uncertainty budgets, and Measurement System Analysis (MSA), • Ensure traceability to national standards (e.g., NIST), • Collaborate with Quality, Engineering, and Manufacturing teams to ensure measurement capability supports product specifications, • Analyze metrology data to drive process improvements, yield enhancement, and defect reduction, • Support root cause analysis of optical performance issues and measurement discrepancies, • Provide technical leadership during customer audits and high-level engineering reviews, • Mentor and develop metrology engineers and technical staff, • When requested, may work on special projects and various related assignments., • Direct technicians as needed., • Provides employee coaching and development. Assists in employment or metrology-purchase decisions., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelor’s, Master’s, or PhD in Optical Engineering, Physics, or related field, • 10+ years of experience in optical metrology or precision measurement engineering within high-precision industries (optics, photonics, aerospace, semiconductor), • Advanced expertise in optical metrology, including Zygo scopes, interferometers, and optical profilometers, • Strong experience with optical measurement techniques, including irregularity, centration, alignment, and active alignment systems with feedback control, • Proficiency in system-level optical performance analysis, including sensor/image quality, MTF, and distortion, • Proven ability to design, develop, and implement custom optical testers and automated inspection systems, • Experience with reliability testing and qualification of optical assemblies, • Expertise in calibration, measurement uncertainty, and statistical/data-driven analysis, • Experience with automation and data analysis tools (e.g., LabVIEW, MATLAB, Python), • Familiarity with ISO 9001 / AS9100 quality standards and cleanroom manufacturing environments, • Strong leadership, technical mentoring, and cross-functional collaboration skills, • Demonstrated ability to drive innovation, continuous improvement, and operational excellence

Job Description Position Summary The Investor Relations Director is responsible for developing and executing the company’s investor relations strategy to effectively communicate Syntec Optics’ vision, financial performance, growth initiatives, and market position to investors, analysts, shareholders, and the broader community. This role serves as a key liaison between company leadership and external stakeholders while supporting corporate messaging, public communications, and industry positioning. Key Responsibilities Investor Relations & Shareholder Communications • Develop and maintain relationships with institutional investors, analysts, shareholders, and financial media., • Support the execution of the company’s investor relations strategy and communication plans., • Prepare quarterly earnings materials, investor updates, shareholder communications, and related disclosures., • Coordinate investor meetings, earnings calls, roadshows, and conference participation., • Create and maintain executive-level presentations for investor meetings, conferences, board discussions, and strategic initiatives., • Represent the company at industry conferences, investor events, and shareholder meetings., • Collaborate with executive leadership to develop clear and compelling messaging regarding company performance, growth opportunities, and strategic direction., • Draft and distribute press releases related to company developments, financial results, strategic partnerships, product launches, and corporate milestones., • Ensure consistency of messaging across investor relations, public relations, and marketing communications., • Coordinate with internal departments and external partners regarding public announcements and media communications., • Monitor developments within the optics, photonics, advanced manufacturing, medical device, aerospace, defense, and technology sectors., • Track competitor activity, market trends, analyst coverage, and emerging technologies relevant to the business., • Provide leadership with insights regarding investor sentiment, industry developments, and market positioning opportunities., • Partner with Finance, Sales, Engineering and Executive Leadership to gather and communicate business updates., • Assist with preparation of annual reports, investor decks, SEC filings support materials, and strategic communications., • Contribute to the development of long-term corporate messaging and brand positioning initiatives., • Bachelor’s degree in Finance, Business, Communications, Marketing, Public Relations, or related field required., • 5+ years of experience in investor relations, corporate communications, public relations, finance, or related field preferred., • Strong written, verbal, and presentation communication skills., • Experience creating executive-level presentations and presenting to investors, leadership teams, and industry audiences., • Ability to communicate technical concepts and operational developments to both financial and non-technical audiences., • Knowledge of capital markets, investor engagement strategies, and financial storytelling., • Experience drafting press releases, corporate announcements, and investor communications., • Strong analytical, organizational, and project management skills with the ability to manage multiple priorities in a fast-paced environment., • Familiarity with SEC disclosure requirements and public company communications preferred., • Experience within optics, photonics, medical device, aerospace, defense, semiconductor, or advanced manufacturing industries preferred.

Job DescriptionDescription: Perform system test, calibration and repair of Ambrell induction heating systems. Responsible for testing production assemblies & units to ensure proper operation of equipment per established test criteria/procedures and record data. In-house testing of Ambrell equipment covering current product lines and legacy equipment including the applications set-up & testing Classroom and hands on equipment training for customers Knowledge of troubleshooting techniques and familiarity and use of test equipment is necessary. The position requires excellent written and verbal communication skills and ability to effectively collaborate with all associates within the Enterprise Completion of test reports and discrepancy reports. Some travel may be required Must have the mind set to Accept, Make or Pass on No Defects! Requirements: AAS in electronics or related field Knowledge of high power and Radio Frequency circuitry preferred Must be able to read and understand schematic wiring diagrams, test procedures, water flow diagrams and-lay out & installation drawings, and be able to check mechanical work to blueprint (CAD drawings) Ability to troubleshoot to the component level a plus Good organizational skills required. Paperwork must be complete, prompt, and accurate Proficient & working knowledge of Microsoft 365 Must be physically capable of strenuous work and working in extreme conditions Testing of new equipment systems and repair of customer equipment Ability to troubleshoot to the component level Previous experience in RF Solid State Technology desirable, but not required Some Applications and Field Service support (travel). Applicant must be willing to do some travel

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Product Engineer to join our team! This individual will be responsible for launching new product such as stand-alone sheet metal components and up to complex electro- mechanical assemblies from documentation control/management through shipping. Key Responsibilities: • Responsible for selecting processes and assisting with cost estimates for new products and tools., • Responsible for Floor Engineering Tech support for his or her part portfolio or customer base., • Effectively utilize Lean Principles when engineering the manufacturing processes., • Develops and documents machine processes and manual processes appropriate for the materials used to manufacture new and existing Customer products., • Aware of new and existing products based upon the 'total production cost' during the product launch and through life of the product., • Serves as technical expert for the Proview Team (Prototype), • Serves as technical expert for the NORP (New Order Review Process) Team for launching new product into Production., • Will assist Technical Sales Engineer for specific programs., • Responsible for assisting and reviewing complex cost estimates., • Responsible for product quality and process safety. Interfaces with Quality to determine effective Quality Plans and if necessary implement NCMR root cause and corrective action closure., • Manages Continuous Improvement Projects., • May be asked to mentor other Manufacturing and Tool Design Engineers and oversee cross-functional project teams ensuring cost and price profitability to drive cost up front. Qualifications:, • Associate's degree (A.S.) To perform this job successfully, an individual should have knowledge of Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Microsoft Project, Internet Explorer, Auto-CAD, strong 3D modeling (SolidWorks) Other Requirements: Familiar with the sheet-metal industry, including fabrication and hard tooling for stamping, forming and welding of steel, stainless, aluminum as well as other metals. Familiar with DFM/DFA principals to reduce costs. Strong GD&T skill set. Familiar with assembly techniques. Tool-making or tool-engineering experience a plus. Ability to present a positive ownership attitude towards work responsibilities. Mental and visual attention with concentration on detail. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job Description Overview: The Beverage Technician at Cirona Labs plays a vital role in the production of our cannabis-infused seltzer line. This position is responsible for operating and maintaining brewing and infusion equipment, ensuring high product quality and consistency, and following strict safety, sanitation, and regulatory guidelines. The ideal candidate will bring mechanical aptitude, attention to detail, and the ability to react quickly to process events. As part of our dynamic manufacturing team, the Brewing Operator will be cross-trained in batching, packaging, raw material handling, quality assurance testing, and inventory control. Accountabilities & Impact Safety • Strictly follow all Cirona Labs safety protocols and cannabis industry compliance standards., • Report potential safety hazards and assist in resolving them proactively., • Monitor beverage blending parameters such as pH, DO (Dissolved Oxygen), CO₂ concentration, product gravity, and cannabinoid concentrations using analytical equipment., • Conduct in-process and final product quality control checks to ensure compliance with Cirona's specifications and regulatory requirements., • Take immediate corrective action on any deviations to protect product integrity and consumer safety., • Operate brewing, infusion, and control systems in accordance with SOPs., • Perform cleaning-in-place (CIP) to maintain hygienic and contamination-free equipment., • Troubleshoot equipment issues and collaborate with maintenance as necessary to reduce downtime., • Execute production schedules efficiently to meet daily targets and delivery timelines., • Optimize brewing and infusion processes to reduce waste and maximize uptime., • Work collaboratively with brewers, packaging operators, maintenance, and QA teams. Documentation & Compliance • Accurately document all production activity, including batch records, ingredient logs, QA checklists, and deviation reports., • Comply with Cirona Labs' SOPs as well as local and federal cannabis manufacturing regulations., • High school diploma or equivalent required., • At least 1 year of experience in manufacturing, beverage production, or similar processing environment., • Prior experience in brewing, fermentation, or cannabis infusion strongly preferred., • Familiarity with filtration technologies (e.g., centrifuge, reverse osmosis) is highly desirable., • Basic computer skills required, including Microsoft Office and digital batch tracking systems., • Must be at least 21 years of age due to cannabis industry requirements., • Fast-paced, team-oriented production environment with frequent changes and tight timelines., • Exposure to varying temperatures, loud equipment, chemical and liquid handling., • Willingness to work rotating shifts, including evenings, overnights, weekends, and holidays., • Able to lift up to 50 lbs and remain on feet 8-12 hours daily., • Must wear PPE including bump cap, steel-toe shoes, gloves, safety glasses, and, when required, dust masks or PAPRs., • Compliance with GMPs and cannabis handling standards required at all times. Cirona Labs is an Equal Opportunity Employer and complies with ADA regulations as applicable.

Job DescriptionSummary: The Account Executive position is responsible for the proactive management and sustainable growth of the company’s product portfolio in the East coast of United States and liaising with customers in East coast of Canada to promote the sale of our products. You Have: • 3+ years of field sales experience in the FMCG grocery or food and beverage industry, • Bachelor's degree or equivalent experience, • MUST be Bilingual in English and Chinese (Speak, Read), Mandarin preferred, • Consumer goods experience with an understanding of distribution channels is preferred, • Proficiency in Microsoft Office especially in Excel, Outlook, PowerPoint and TeamsYou Will:, • Manage all aspects of the distributor/customer relationship in their region., • Management and achievement of the annual Sales Budget, • Distributor management includes distribution, inventory, and avoidance of overstocking, • Preparation of company reports such as Weekly Sales updates, monthly sales forecasts and summary of day-to-day business and issues, • Understand the market trend, share market intelligence insights with sales & marketing teams on regular base, • Plan & execute sales related promotion activities, • Identify business and channel opportunities, expand sales networks and provide quality customer services, • Other job-related duties and responsibilities will be assigned from time to time

Job DescriptionGopuff is looking for Operations Associates (OAs) to join the operations team. Directly reporting to a Site Leader, OAs play an essential role at Gopuff that requires drive, perseverance, positivity, and enthusiasm for the challenge. You will accomplish a variety of operations responsibilities including picking, packing, receiving product both within our site and accompanying kitchen (if applicable), and working with our partner drivers. Customers turn to Gopuff to provide their everyday essentials—day and night, rain or shine. We're assembling a team of thinkers, dreamers and risk takers who are ready to help us reshape the world of retail faster than ever before. And it doesn't hurt if you like snacks. Responsibilities: -Pick and pack items for dispatch to customers-Receive and unpack pallets of product from vendors, ensure physical inventory count matches purchase order/invoice, and resolve discrepancies-Manage inventory and re-shelving of canceled orders-Clean and organize sales floor and overall facility-Manage waste and spoilage through strict compliance with FIFO practice-Contact customer for substituted or out-of-stock items-Handle, scan and move product in a safe and well-organized manner-Stand, push, pull, squat, bend, reach and walk during shifts-Use carts, pallet jacks, dollies and other equipment to move product-Handle products that may contain tobacco, nicotine, and/or alcohol-Work in freezer locations periodically throughout shifts-Capability to walk several flights of steps periodically throughout the day-Prepare quality beverages and food menu items for all customers by observing all recipes and presentation standards-Ensure accuracy of all food and beverage packaged for delivery-Follow health, safety and sanitation guidelines for all products-Receive and put away order/invoice, and resolve discrepancies when they do not match expiration requirements-Maintain Kitchen Facility organization and standards to ensure resources can be accessed while managing waste and spoilage through mindful pouring and food preparation-Prepare, package and stage/handoff orders Qualifications:-High School Diploma or GED Equivalent-Experience working in a restaurant or retail environment (preferred, not required)-The ability to work a fluid schedule and be available during peak shifts (1st, 2nd, 3rd shifts)-General working knowledge of basic web-based software applications (e.g. Google G-Suite)-Stand and walk for the duration of an assigned shift-Lift up to 49 pounds-Available to work flexible hours that may include mornings, evenings, weekends, nights and holidays #LI-DNPWhat We Offer • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay:, • Gopuff pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based on a cost-of-labor index for that geographic area., • Rochester, NY Pay Rate: USD $16.25/hr, • The salary range above reflects what we’d reasonably expect to pay candidates. A candidate’s starting pay will be determined based on job-related skills, experience, qualifications, work location, and market conditions. These ranges may be modified in the future. For additional information on this role’s compensation package, please reach out to the designated recruiter for this role. Incentives:

Job Description Job Title: Controls Technician Job Description • The Controls Technician programs, troubleshoots, and repairs electrical and control systems in a manufacturing environment., • Ensure the safety, reliability, and compliance of all electrical and control systems within the facility., • Work on AC and DC circuits, including single- and multi-phase systems, to support production operations., • Collaborate with engineers and fellow technicians when working with electrical devices, circuits, and control systems., • Perform cabling and wiring work for electronic equipment, computers, and telecommunications equipment., • Connect wires to transformers and other electrical components according to established standards and diagrams., • Plan and generate layouts for electrical installations and wiring, ensuring accuracy and adherence to specifications., • Apply working knowledge of single-line diagrams and physical locations of sub-stations to support maintenance and troubleshooting., • Install, remove, repair, and adjust pneumatic and electrical instruments and actuators., • Observe automated systems in operation, identify abnormal conditions, and troubleshoot to determine root causes of issues., • Install, service, and maintain power circuits, including synchronizing their operation with existing systems., • Troubleshoot, program, and debug PLCs (including Siemens and Allen-Bradley), HMIs, relay-based circuits, and networking components., • Troubleshoot, replace, and program variable frequency drives (VFDs) to support motor and process control., • Support predictive and preventive maintenance programs to reduce downtime and extend equipment life., • Initiate purchase orders for required parts and materials to complete repairs and projects., • Utilize CAD tools to support design, modification, and documentation of control and electrical systems., • Work with pneumatics and hydraulics as part of integrated production and control systems., • 5+ years of experience working with industrial electrical and control systems., • Advanced experience with Siemens PLCs, including programming, troubleshooting, and debugging., • Ability to troubleshoot, program, and debug Allen-Bradley and Siemens PLCs and HMIs., • Strong troubleshooting skills in PLCs, electrical systems, relay-based circuits, and networking., • Hands-on electrical experience with AC and DC, single- and multi-phase circuits., • Knowledge and experience with industrial electrical and controls systems in a production environment., • Ability to troubleshoot, replace, and program variable frequency drives (VFDs)., • HMI knowledge and experience supporting operator interfaces., • Ability to read and work from single-line diagrams and understand sub-station layouts., • Experience with pneumatics and hydraulics in an industrial setting., • Networking knowledge as it relates to industrial control and automation systems., • Ability to install, service, and maintain power circuits, including synchronization of their operation., • Strong diagnostic skills for identifying root causes of automation and control issues., • Associate’s Degree in Electrical Engineering, Electrical Maintenance & Construction, or a related field is preferred., • CAD design knowledge to support control system layouts and documentation., • Experience with Siemens PLC platforms in a production environment., • Knowledge of variable frequency design and industrial circuitry., • Familiarity with network infrastructure used in industrial automation., • Experience working with production and manufacturing equipment., • Ability to plan and generate electrical installation and wiring layouts., • Strong communication and teamwork skills to coordinate with engineers and other technicians., • This role operates in a manufacturing environment with rotating shifts of 6:00 a.m. to 2:00 p.m., 2:00 p.m. to 10:00 p.m., and 10:00 p.m. to 6:00 a.m., • Shifts typically rotate every two months among first, second, and third shift to share overnight coverage across the team, • There is flexibility for individuals who prefer to remain on an off-shift., • The facility presents varying noise levels and exposure to both hot and cold conditions, depending on the area and production activity., • Personal protective equipment (PPE) may be required in certain spaces to ensure safety., • The environment is highly automated and production-focused, offering exposure to modern control systems, PLCs, HMIs, VFDs, pneumatics, hydraulics, and networked industrial equipment. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionQuality Technician II (3rd Shift) Location: Rochester, NY Pay range: $19.25 – $24.50/hour + $1.75 shift differential (pay is negotiable for more experience) Schedule: Sunday – Thursday | 11:00 PM – 7:00 AM Must be able to train on 1st shift which is Mon-Fri 7AM-3PM for 30-60 days This is a permanent position with full benefits that start day 1 About the Company We are a leading manufacturer of high-quality printed packaging solutions serving well-known consumer brands across industries such as food & beverage, personal care, and pharmaceuticals. Our team is committed to innovation, sustainability, and delivering exceptional packaging that meets the highest standards of quality and performance. Position Overview The Quality Technician II reports directly to the QA Manager and collaborates with all levels of the organization. This role plays a key part in maintaining and improving the Quality Management System (QMS), supporting continuous improvement initiatives, and ensuring products meet customer specifications and compliance standards. You’ll work closely with operations and quality leadership to ensure process control and product conformity. Key Responsibilities * Review job tickets for specifications and special instructions * Follow all standard operating procedures related to the role and department * Communicate effectively with cross-functional teams on order status and completion * Perform visual inspections and finished product audits to ensure quality standards are met * Complete and maintain detailed quality documentation * Document inspections and identify non-conformances * Utilize ERP systems (Amtech preferred) to support production and QA processes * Participate in internal quality audits * Use measurement tools to inspect product accuracy and consistency * Assist in resolving quality issues and customer complaints * Review, approve, and file job folders and customer samples * Complete Certificates of Compliance (C of C) and Certificates of Assurance (C of A) * Provide technical support to production teams * Support shift decision-making and escalate critical issues as needed * Help revise and maintain QA work instructions * Maintain clear communication during shift transitions * Follow all safety protocols and maintain a clean, organized workspace * Assist with product sorting and other duties as assigned Qualifications * High school diploma or GED required * 1–3 years of quality assurance experience (manufacturing preferred) * Ability to read and interpret job tickets, safety rules, and procedures * Strong attention to detail and accuracy * Basic math skills (addition, subtraction, multiplication, division) * Proficient in Microsoft Word and Excel * Experience with ISO9001 standards preferred * General understanding of manufacturing processes preferred * Ability to maintain detailed records and documentation * Comfortable using measurement tools for inspection * Must pass color vision (Munsell 100) test * Strong communication and interpersonal skills * Reliable, dependable, and able to maintain good attendance * Willingness to work overtime as needed Why Join Us? * Competitive pay with shift differential * Stable, growing manufacturing environment * Opportunity to contribute to continuous improvement initiatives * Team-oriented culture with cross-functional collaboration If you’re detail-oriented, quality-driven, and looking to grow your career in manufacturing, we encourage you to apply today! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job DescriptionSalary: $50k - $65k POSITION DESCRIPTION: The Videographer plays a key role in shaping the visual storytelling of the brand by capturing and producing compelling video content that showcases tools in action, highlighting product innovation, and supporting marketing activities across North America. They collaborate closely with the marketing, creative, and product teams to create content for social media, digital platforms, events, and retail support. Through hands-on production and post-production, they elevate brand presence and reinforce the companys positioning as an industry leader. ROLES & RESPONSIBILITIES: Video Production & Filming: • Shoot high-quality footage of tools in use, testimonials, and product demonstrations in studio and on-location settings., • Edit raw footage into finished video content for various marketing channels., • Work with stakeholders to plan storyboards, shot lists, and schedules., • Maintain a consistent visual identity and tone across all video assets., • Collaborate with the marketing team to align video content with campaign objectives., • Capture hands-on tool usage to create engaging and educational content for end users., • Produce short-form videos optimized for platforms like Instagram, YouTube, and TikTok., • Maintain a well-organized library of video files, project assets, and raw footage., • Film at trade shows, jobsite visits, and internal events to capture brand experiences., • Partner with design, marketing, and product teams to understand content needs., • Provide creative direction and technical insight during project briefings and reviews. SKILLS & EXPERIENCE: • Proficiency in video production tools (DSLRs, mirrorless cameras, lighting, audio)., • Expertise in editing software (Adobe Premiere Pro, After Effects, Final Cut Pro)., • Strong understanding of framing, lighting, and audio for field and studio environments., • Ability to manage multiple projects with tight deadlines and changing priorities., • Experience shooting product and lifestyle content in industrial or rugged settings preferred., • Strong storytelling instincts with a passion for craftsmanship and tools., • Ability to lift and transport gear and work in physically demanding environments., • Knowledge of social video formats and platform requirements., • Excellent communication and teamwork skills., • 2+ years of experience in videography, preferably within a product, brand, or agency context.

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning st-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I and CNC II operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Basic GD&T skills., • Basic and Advanced Vantage training., • Perform basic repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED) and/or technical school, associates degree; and three to five years related experience and/or training; or equivalent combination of education and experience. Internal Training Requirements • Company Benefits Orientation, • Bloodborne Pathogen, • Company Practices & Policies, • Fire Extinguisher Safety, • Mission, Vision & Values Training, • Hazardous Communication, • Values Based Leadership, • Lock Out/Tag Out Video, • Traveler Sign-Off, • Personal Protection Equipment, • Right-to-Know Training

Job Description CNC MACHINIST - A SHIFT Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Machinist. The CNC Machinist is responsible for the set up and observation of machines to verify the accuracy of the machine settings and to detect malfunctions or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Machinist is responsible for the setup and controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling, chamfering, and deburring. DUTIES & RESPONSIBILITIES • Sets up machine and observes machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and caliper., • Sets up and controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling, chamfering, and deburring., • Inspects "first part" and inspects work pieces throughout the production run for out-of-tolerance machining., • Clean machine and work area., • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes, • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating, • Ability to understand and carry out oral and written directives, • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Thorough operational knowledge and skills of specific CNC mills and CNC lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands, • Ability to operate assigned equipment safely and efficiently, • Ability to keep record of time spent and material used, • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, • A HS Diploma or GED, • 5 years of previous CNC setup and operation experience, • Experience on Mazak or Haas Machines preferred, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001: 2015, • Capacity to handle changes in business operations and adjust to new situations, • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. About the Role: This role is responsible for managing day‑to‑day quality control activities to ensure product conformance, process capability, and compliance with customer and quality system requirements. The position oversees quality documentation, PPAPs, inspections, corrective actions, and the supervision and training of Quality Inspectors, while serving as a key liaison with suppliers and customers on quality issues. Success in this role requires strong technical quality expertise, attention to detail, and the ability to proactively drive problem resolution and continuous improvement across assigned products and processes. What You’ll Be Doing: • Responsible for adhering to and maintaining all quality system procedures and requirements related to the position., • Must adhere to all safety rules and company policies, as well as enforce the compliance and implementation of each through subordinates., • Attendance/punctuality is consistently at work and on time; ensures that the Attendance Policy is enforced consistently through subordinates., • Maintain Quality Control documentation to include:, • Inspection Plans, • Product history, • Control Plan, • Process Flow Diagrams, • Sample locations, • Blueprints, • Quality Alerts, • PPAPs, • NCMRs, • Customer claims (Local management tool and customer portal(s)), • Reviews and dispositions supplier PPAP submissions including generation of receiving inspection sampling plan as required. Approves Supplier 8Ds., • Defining and maintaining control plans and inspections plans as agreed with customer., • Administers training program including testing and gaging for hourly personnel., • Supervision and training of Quality Inspectors as required., • Develop and initiate standards and methods for inspection, testing, and evaluation., • Kick off tool repair/improvement activities as required, • Receive and coordinate the resolution of customer complaints, 8D completion on customer portal and internal problem-solving tool, based on customer timing, • Devise sampling procedures and designs and develop forms, inspection plans and instructions for recording, evaluating, and reporting quality data., • Leads management of suspect / discrepant materials, including Quality alerts, NCMR management, MRB reviews, sort/rework instructions and internal claim management., • Manage PPAPs, submission and approval on time, • Management of boundary, master and PPAP parts, • Asure capability for their assigned parts and processes, • Assure product conformance by validation of parts and approval of any process change., • Participates in audits as required, as auditee or auditor We would love to hear from you if: Education and/or Experience: Bachelor's degree (B. A.) from four-year college or university; or two to four years related experience and/or training in similar position in the Automotive sector; or equivalent combination of education and experience; GD&T knowledge, SPC knowledge, core tools Computer Skills: Proficient with Microsoft Office Suite 365; Minitab; Ability to learn new software as needed. Why You’ll Love Working for Century Mold: • We reward our employees. The salary range for this position is market competitive and is based on relevant years of experience and skills., • We care about our employee’s well-being. In addition to direct compensation, we also offer a robust array of benefits to our employees; these include medical insurance, dental, vision, life insurance, as well as other great benefits to support your well-being. We also support our employees by offering 401(k) matching. The details of your position: Your Job Title will be: Quality Engineer Belonging to the: Quality Control Department You will report directly to: Plant Quality Manager Your Employment Status: Exempt Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job Description Come join our team! At Unlimited Technology, we are committed to our company's core values of Passion, Collaboration, Innovation and Adaptability. With offices throughout the United States, we are a premier cyber and physical security specialty contractor, and we are growing at a rapid pace. We have a wide range of talented and experienced individuals that deliver cutting edge technology solutions to meet our customers' ever-changing needs. We secure the facilities and networks of the world's leading brands and critical infrastructure and are recognized leaders in the physical and IT security, cyber, and managed services industries. UT offers a rewarding career, great benefits, and the chance to learn and work with ground-breaking technology and premier clients. The Field Installation Supervisor is responsible for managing their team members assigned for installing, programming, terminating, and commissioning a wide range of access control and video products and systems. The Field Installation Supervisor will also have the same duties as those who report to him/her but will guide and assist the technicians under their supervision and be responsible for reviewing the work as required for each of their reports. As a customer facing employee, the Field Installation Supervisor must be a personable, knowledgeable self-starter who can make sound decisions that are in the best interest of the customer and Unlimited Technology. The Field Installation Supervisor must have excellent communication skills, both verbal and written, and be able to work closely with the sales and operations departments. This position will report directly to the Program Manager to which they are assigned. Duties and Responsibilities • Supervise and manage the direct reports assigned, • Always maintain a professional attitude and appearance., • Ability to work independently, with very little supervision., • Demonstrates the ability to supervise and mentor others., • Must possess programming skills associated with the UT product line., • Must be willing to travel as needed, sometimes on short notice., • Must be able to identify and resolve issues that would have a negative impact on job productivity., • Be the projects "eyes and ears" for the management team., • Maintain a safe, clean working environment always., • Communicate all activity to the job Project Manager or Program Manager in a timely manner., • Must be willing to assist the Install team., • Ensure all UT and site-specific safety programs are followed., • Attend any product or safety training that is required., • Complete performance reviews of the team members., • Assist Program and Project Managers with weekly and monthly team supervisory duties. IE: Approval of timesheets, expenses, credit card reconciliation and PTO requests., • High School diploma or equivalent., • Mastery of all Level III Install Technician responsibilities., • Minimum 5 years of field installation experience in the security environment., • Certifications in Software House, AMAG, Genetec, and Lenel are high priority., • Demonstrate competencies in IP cameras and systems, such as Axis, Sony, Avigilon, and Exacq., • Experienced in the installation of door hardware such as strikes and magnetic locks., • Experienced in reading and comprehending engineered drawings., • Experienced in the marking up, or "red lining" of drawings post install., • Proficient in the use of a computer, with MS Word, MS Project, and MS Excel skill sets., • Excellent communication skills (verbal and written) and the ability to work well and interact with other UT employees as well as UT customers., • Strong work ethic and teamwork; "can do" attitude and desire to provide best service. Strong interpersonal and communicative Skills., • Ability to work under pressure with minimal supervision; must be a self-starter and quick learner., • Strong problem-solving skills Pay Range $75,000—$110,000 USD Benefits • Health, dental, and vision coverage, • Life insurance, • 401 (k) w/company match 100% up to 3% and an additional 50% match of 2%, • Paid time off

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Performs duties of a clerical nature, including close attention to operational details to assure timely processing of shipping paperwork and documentation to meet customer requirements. Updates Plant Manager throughout shift with status and progress against customers schedule requirements. Informs customer service of issues relative to order processing. Minimum Qualifications: • Entry level, high school diploma or equivalent, • Minimum 2-years or more experience in Shipping and Receiving, • Good organizational and multitasking skills, • Excellent clerical skills Specific Job Duties: • Process customer shipping documents in Job Boss including pack list, pick list and BOL (bill of lading), • Ensure all skids & cartons are accurately counted and labeled prior to loading the carrier, • Performs inventory transactions & makes material adjustments (location to location), • Print customer labels for packages, cartons, skids, tubs and returnable containers, • Prepares paperwork for accounting department to process export documentation for international shipments, • Assist in processing receiving paperwork form outside services, • Assist purchasing with receiving paperwork, • Process Fed-Ex and UPS documentation online for overnight and expedited shipments, • Assist with processing/packaging customer expedites, • Assist with packing parts as necessary, • Verifies that all shipping paperwork is accurate and complete before forwarding to customer service and accounting, • Immediately notify Customer Service if product is in jeopardy of not shipping, • Set-up carriers for customer pick-ups when required, • Review all daily shipping requirements from Customer Service This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Performs all assigned manufacturing tasks to ensure coordination of all production operations and products. This includes packaging, sewing, assembly, counting, stapling, etc. Promotes a safe working environment and follows the Organization’s values. All production workers are expected to be available to work in all areas of manufacturing, where training has been provided. ESSENTIAL DUTIES AND RESPONSIBILITIES • Attributes:, • Shifts jobs when needed, to help fulfill production needs., • Maintains work schedule at hire date., • Adheres to the organization’s values., • Performs all other duties as assigned when needed., • Production & Quality system Requirements:, • Understands the ISO quality statement and ISO objectives., • Can explain how they contribute positively to Goodwill of the Finger Lakes’ Quality system., • Follows’ all written procedures, processes and work instructions., • Maintains a clean, safe and organized work area., • Reports all potential product issues to supervisor or team lead., • Follows the Non-Conforming material procedures. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed below are representative of the knowledge, skill and/or ability required. EDUCATION and /or EXPERIENCE: High School Diploma or General Education Degree (GED). One-year experience in production preferred. Or an equivalent combination of education and experience. INTERPERSONAL SKILLS: Must be able to interact and communicate appropriately and effectively with all levels of employees, customers and outside guests. REASONING ABILITY: Ability to apply common sense understanding to carry out simple one (1) or two (2) step instructions. Ability to deal with standardized situations with only occasional or no variables, as required. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to be reasonably mobile. The employee must have the use of hands and arms, and be able to work in a variety of situations, some of which may require kneeling, bending, crouching and standing for periods of time. The employee must frequently lift and/or move 10 pounds and occasionally lift and/or move up to 35 pounds, depending on job assignment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee may frequently work near moving mechanical parts or be exposed to wet and/or humid conditions, fumes or airborne particles. The noise level in the work environment is usually moderate to loud. Goodwill of the Finger Lakes and its subsidiaries encourage diversity in the workplace; we are an Equal Opportunity Employer. Minority/Female/Sexual Orientation/Gender Identity or Expression/Veteran/Disability

Job Description Job Summary: The Quality Manager is responsible for developing and maintaining a system to assure that all products manufactured by the organization meet customer specifications and achieve quality and reliability levels. Directs activities and provides guidance to quality department personnel. Essential Duties and Responsibilities: • Directs day to day activities of the Quality department, provides employee support, direction, and development. Make employment decisions regarding the Quality department., • Responsible for training and enhancing the knowledge of quality inspectors., • Perform quality engineering decisions during the pre-production process to develop and implement control plans and inspection documentation to ensure conformity of final product., • Responsible for monitoring Quality department’s output for 1st piece, in-process, receiving, final, and first article inspections., • Performs the quality authorization function for all Quality Management System documentation., • Meets with vendors, customers, quality representatives and company personnel to discuss and resolve quality problems and corrective actions., • Responsible for effective NCMR and MRB process., • Team leader of all Material Review Board functions., • Compiles corrective action summary reports for the Management Review Meetings., • Monitors, maintains, or develops, performance reporting systems relative to the effectiveness of inspection operations and initiates necessary action based upon results., • Interacts with company personnel to support scheduling and implementation of continuous improvement objectives in the manufacturing process., • Recommends and implements corrective action procedures to assure improvement of lean methods and elimination of wasteful practices in QA/other departments within the organization., • Responsible for all necessary quality related documents as required by customers and internal staff., • Assist with the Implementation and maintenance of the Quality Management System for ISO compliance including, ISO education, procedure writing, auditing. Additional Responsibilities: • Responsible for quality assurance personnel scheduling and inspection coverage for the facility., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency., • Responsible for all inspection tooling in the facility., • Responsible for all the calibration activities in the facility., • When requested, may work on special projects and various related assignments., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelor’s degree or equivalent in education and experience., • Minimum 10 years experience in quality control, with management experience, • Assist with company print reviews and drawing interpretation, including extensive knowledge of GD&T., • Familiar with the operation and programming of a CMM., • Familiar with CNC technology and the use of CAD/CAM software (IE; Mastercam, Solidworks, ETC…), • Experience with supply chain management and supplier approval procedures, • Experience with functional gauging., • Problem solving and corrective/preventative action expertise., • Oral and written communication skills., • Ability to remain organized, • Must be proficient with Microsoft Office and Outlook., • Familiar with all aspects of ISO and ISO certification.

Job Description Allient-Rochester (formerly ORMEC Systems, Inc.), a subsidiary of Allient Inc., specializing in motion control systems, including motion controllers, servo drives, motors, and integrated automation solutions is in growth mode and currently seeking a Senior Embedded Software Engineer to join our team in Rochester, New York! Allient-Rochester services the aerospace & defense, medical, semiconductor equipment, e-mobility & logistics, factory & industrial automation, and packaging industries, Allient-Rochester’s tradition of innovation and excellence in motion control continues to grow as part of Allient’s global network of motion and control solutions. The Senior Embedded Software Engineer researches, designs, and develops embedded software systems in collaboration with hardware product development. This role requires a high level of independence and leadership, particularly in complex projects, and involves managing the full software development lifecycle, contributing to technology strategy, on-time delivery of software projects, and mentoring junior engineers. Apply now! Responsibilities: • Design, implement, and optimize embedded motion control, servo, and I/O systems to meet aggressive performance, determinism, and reliability requirements., • Own critical subsystems within larger product architectures., • Serve as a technical authority for EtherCAT and real-time fieldbus architectures., • Lead the design and implementation of high-performance communication stacks, synchronization strategies, and distributed systems between controllers and drives., • Lead integration and optimization of multiple industrial protocols. Ensure robust interoperability with third-party systems and controllers., • Contribute to and own portions of system-level architecture for embedded platforms, spanning firmware, real-time OS, communication layers, and hardware/firmware boundaries., • Translate high-level architectural direction into robust subsystem designs that scale across products., • Research and integrate new technologies to enhance product capabilities., • Coordinate technologies with industry partners and vendors; interface with vendors to select/customize purchased software, support programs, and hardware such as single board computers., • Investigate and resolve software issues, implementing enhancements and optimizations., • Oversee all phases of software development (design, coding, testing, documentation, deployment, and maintenance)., • Create and maintain verification and regression tests for all aspects of the design of developed products., • Manage projects independently, adapting to complexity and scale., • Support a culture of continuous improvement and innovation within the team, engaging in advanced training and professional development initiatives., • Collaborate with cross-functional teams to ensure cohesive system design and support the alignment of software development projects with organizational goals and product roadmaps., • Adhere to best practices in software development and documentation, ensuring compliance with industry standards and regulatory requirements., • Stay updated with emerging technologies and methodologies to contribute to efficiencies and competitive advantages in software engineering processes., • Provide mentorship and technical guidance to junior engineers., • Contribute to technology roadmaps and strategic planning for software development., • Lead efforts in continuous improvement, innovation, and best practices., • Lead and actively participate in all phases of the product lifecycle—architecture, implementation, review, documentation, testing, release, and long-term maintenance., • Own complex problem investigations in the field and drive root-cause analysis and systemic improvements., • Support coordination across teams, including hardware, QA, and product management., • As a Team Leader, oversee the daily operations of the software engineering team, including task assignments, performance monitoring, and technical guidance (as assigned)., • Bachelor’s or Master’s degree in Computer Science, Software Engineering, or a related field., • 10+ years of professional experience in embedded software/firmware development., • Expert-level experience with embedded system design and real-time programming., • In-depth knowledge of EtherCAT protocols and real-time communication systems., • Strong understanding of industrial Fieldbus technologies and their application, including CANopen, Modbus/TCP, Ethernet/IP, and PROFINET., • Expertise in Linux, Unix, and real-time operating systems., • Proficiency with Windows operating system and computer operation., • Proficiency in C, C++. • Proficiency with software development tools, version control systems, and agile methodologies., • Experience with Embedded control system integration:, • Motion control algorithms and systems., • ROS 2, with a focus on motion control and servodrive interfacing., • RTOS for embedded controllers (eg. FreeRTOS) . o Computer-based industrial automation motion controllers and soft-PLC., • Serial encoders (e.g., EnDat, BiSS, SSI). • Knowledge of programming in IEC 61131-3, related development tools, and Relay Ladder Logic., • Proficiency in Python and C#., • Experience with QNX Neutrino or other POSIX-based operating systems., • Knowledge of FPGA architecture and design., • Strong problem-solving and analytical skills., • Ability to work independently and lead projects effectively., • Excellent verbal and written communication skills., • Commitment to quality, efficiency, and innovation., • Experience in cross-functional team collaboration Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit *Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Job Summary: Responsible for washing and cleaning parts before shipping to customer or outside services. Pack parts or assemblies as required for storage/delivery. Help maintain product inventory. Essential Duties and Responsibilities: • Cleans parts prior to shipping as instructed., • Works with solvent and other cleaning chemicals (bleach, dish soap, etc.), • Deburr or polish parts as per routing or as instructed., • Works with steel wool, sandpaper, knives, and various deburr/polish equipment., • Sand blasts, paints and assembles parts., • Assists shipping department in maintaining inventory., • Assists shipping department in preparing parts for shipment to outside services or to the customer., • When requested, may work on special projects and various related assignments., • May be required to work in various areas of operations when necessary. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee must also occasionally lift and/or move up to 30 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Prefer previous experience in a machine shop environment., • Good communication skills., • Must be able to take direction from various personnel. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job DescriptionSenior Specialist Electrical EngineerRochester, NY • Defense Industry • Full-Time Position SnapshotLocation: Rochester, New York (on-site)Compensation: Based on experienceEmployment Type: Full-time, direct hireSeniority Level: Mid-SeniorBenefits: Full benefits package — health, dental, vision, 401(k) match, FSA, EAP, education assistance, parental leave, paid time off, and company-paid holidaysRelocation Assistance: AvailableInterview Travel: ReimbursedTravel Required: NoneVisa Sponsorship: Not availableSecurity Clearance: Not required at hire — must be eligible to obtain a U.S. Security ClearanceAbout the RoleJoin a dedicated team of engineers supporting mission-critical military communication products from pre-release through end of life. As a Senior Specialist Electrical Engineer, you will investigate and resolve a wide range of technical issues — RF/analog, digital, assembly, SMT, and test-related — and collaborate across multifunctional teams to diagnose problems to the component level, develop solutions through simulation and experimentation, and implement corrective actions.You will also be a partner with design engineering on new product launches, supporting root cause analysis, prototype troubleshooting, and successful transition into full rate production.Key Responsibilities • Mitigate component shortages by qualifying alternatives or redesigning circuits and sub-assemblies., • Identify and implement design, process, and test improvements to increase test yields and overall product quality., • Partner with cross-functional teams to meet manufacturability, testability, and other DFx requirements for volume production., • Collaborate with design engineering and manufacturing teams to introduce new designs into production., • Recommend and implement circuit changes prior to and during new product launches., • Drive component obsolescence mitigation throughout the product lifecycle., • Provide technical guidance to junior engineers, lead investigations, and coordinate task priorities., • Work with vendors, Quality, and Supply Chain to resolve material discrepancies., • Troubleshoot units, modules, and boards to the component level.Required Qualifications, • Bachelor's degree with a minimum of 6 years of relevant experience; or a Graduate degree with a minimum of 4 years; or, in lieu of a degree, a minimum of 10 years of relevant RF experience., • 4+ years of hands-on RF experience., • Demonstrated experience with RF design — defense industry experience strongly preferred., • Hardware troubleshooting capability across analog and RF components and circuits., • Proficiency designing and conducting engineering experiments and acting on test results., • Experience designing and analyzing circuits using ADS, MATLAB, and other simulation tools., • Proven ability to lead small technical design or troubleshooting teams, prioritizing tasks to meet yield and shipment targets., • Skilled in standard lab equipment: oscilloscopes, DMMs, spectrum analyzers, network analyzers, and signal generators., • Strong written and verbal communication skills, including the ability to deliver clear technical presentations to all levels of management., • Ability to work independently with general supervision in a fast-paced, multi-team environment., • Must be eligible to obtain a U.S. Security Clearance.Preferred Qualifications, • Bachelor’s degree in electrical engineering., • Experience with tactical Radio and Power Amplifier hardware., • Demonstrated experience troubleshooting to the component level., • Working knowledge of LabVIEW, ADS, and Jira., • Advanced proficiency with MS Office, including spreadsheet manipulation and presentation development., • Excellent interpersonal skills with internal teams and external suppliers.Important Notes for Applicants, • Candidates must be in or willing to relocate to Rochester, New York. Relocation assistance is available., • RF design experience in the defense industry is strongly preferred., • Candidates whose RF background is primarily in cellular/commercial wireless are not a fit for this role., • This role does not offer visa sponsorship.Application ScreeningApplicants will be asked to confirm their eligibility to obtain a U.S. Security Clearance.

Job Description ROLE OVERVIEW: A leading technology organization is seeking a Senior Specialist, Electrical Engineer (RF) to support military communication products throughout their full lifecycle, from development through production and obsolescence. This role will work closely with cross-functional teams to troubleshoot complex RF, analog, digital, and manufacturing issues, identify root causes, and implement effective solutions. The ideal candidate will bring strong hands-on technical expertise along with the ability to collaborate across engineering, manufacturing, and supply chain teams. KEY RESPONSIBILITIES: • Investigate and resolve technical issues across RF, analog, digital, assembly, SMT, and testing domains, • Perform root cause analysis at the component level using simulation and experimental methods, • Support new product introductions by collaborating with design engineering and troubleshooting prototypes, • Mitigate component shortages by qualifying alternatives or redesigning circuits and assemblies, • Identify and implement design, process, and test improvements to increase yield and product quality, • Ensure manufacturability and testability requirements are met for production environments, • Work with engineering and manufacturing teams to transition new designs into production, • Address component obsolescence throughout the product lifecycle, • Collaborate with vendors, quality, and supply chain teams to resolve material discrepancies, • Lead technical investigations and provide guidance to junior engineers, • Troubleshoot units, modules, and circuit boards to the component levelESSENTIAL SKILLS:, • Strong hardware troubleshooting skills, including RF and analog circuits, • Ability to work independently with minimal supervision, • Experience designing and conducting engineering experiments and interpreting results, • Proficiency with circuit design and simulation tools such as ADS and MATLAB, • Experience leading small technical teams and prioritizing tasks to meet production goals, • Ability to present technical findings clearly to various levels of leadership, • Experience working in fast-paced, cross-functional environments, • Hands-on experience with lab equipment such as oscilloscopes, DMMs, spectrum analyzers, network analyzers, and signal generators, • Strong problem-solving skills and ability to quickly learn new technologies, • Ability to obtain a U.S. Security ClearanceQUALIFICATIONS:, • Bachelor's degree with a minimum of 6 years of relevant experience, or, • Graduate degree with a minimum of 4 years of relevant experience, or, • 10 or more years of related experience in RF in lieu of a degree, • Minimum of 4 years of RF engineering experiencePREFERRED QUALIFICATIONS:, • Degree in Electrical Engineering, • Experience with tactical radio systems and power amplifier hardware, • Strong experience troubleshooting to the component level, • Familiarity with LabVIEW, ADS, and Jira, • Advanced proficiency with Microsoft Office, including data analysis and presentation tools

Job Description Network Inventory Manager Join our Dynamic Team Overview The Network Inventory Manager plays a critical role in driving efficiency, cost savings, and service excellence across the Parksite Interiors Business Unit (APC and Surfaces). This position is responsible for optimizing inventory movement across the network—ensuring the right products are in the right place at the right time, while minimizing freight, handling, and operational costs. You’ll serve as a key strategic partner to Purchasing, Operations, and Sales leadership, balancing service, speed, and cost efficiency through data-driven decisions and strong cross-functional collaboration. Why join our team? Build your career in a thriving industry • Be at the center of a fast-paced distribution network, directly impacting service levels, cost efficiency, and customer satisfaction across multiple business units, • Work in a highly collaborative environment where your decisions influence Purchasing, Operations, and Sales strategies at a leadership level, • 401(k) Program to secure your financial future, • Company-Paid Life Insurance, • Health, Dental, Vision, and Flexible Spending Insurance Plans, • Paid Holidays, • Paid Time Off (PTO), • Employee Stock Ownership Program (ESOP), • Expand your expertise in supply chain strategy, inventory optimization, and cost management through hands-on leadership experience, • Develop cross-functional leadership skills by partnering with Purchasing, Operations, and Sales teams across the organization, • Gain visibility with executive leadership through monthly reporting, KPI ownership, and strategic recommendations What you’ll do • Establish and implement transfer policies in partnership with Business Unit leadership and Purchasing to maximize inventory availability while maintaining cost efficiency, • Collaborate closely with Purchasing to align transfer strategies with supplier orders, buying reports, and overall sourcing plans, • Evaluate and approve or deny internal transfer requests based on cost, service impact, and established inventory rules, • Maintain and refine standardized transfer policies and approval workflows to ensure consistency across the network, • Identify high-frequency transfer items and convert them into stocked items by optimizing reorder parameters, • Partner with Operations to reduce redundant transfers and improve freight mode efficiency, • Analyze transfer and inventory data to identify cost reduction opportunities and improve product placement strategies, • Deliver monthly performance reports to leadership highlighting trends, savings opportunities, and operational improvements, • Ensure customer demand is met through proactive inventory placement and strategic sourcing decisions, • Continuously monitor and adjust inventory sourcing rules to improve service levels and reduce costs What you bring Required Qualifications Education & Experience • Bachelor’s degree in Business, Supply Chain Management, or a related field, • 5+ years of progressive leadership experience in distribution, purchasing, inventory management, or operations, • Strong analytical and data-driven decision-making skills with high attention to detail, • Ability to balance cost efficiency with customer service and operational performance, • Ability to sit, stand, and work at a computer for extended periods of time, • Capability to occasionally move throughout warehouse or operational environments as needed, • Ability to perform tasks that may require light lifting or movement of materials when necessary Pre-Employment Requirements • Ability to pass pre-employment physical, drug screen, and background check, • Experience working within multi-location distribution networks or supply chain environments, • Familiarity with ERP systems, inventory management software, or supply chain analytics tools, • Demonstrated success in reducing costs and improving service levels through process improvements, • Experience developing or managing inventory policies, transfer strategies, or sourcing rules Work Environment • Fast-paced, data-driven office environment with frequent collaboration across departments, • Regular interaction with Purchasing, Operations, and Sales leadership teams, • Hybrid exposure to both office and warehouse/distribution environments, • Dynamic setting where priorities may shift based on business needs and customer demand, • High level of autonomy with accountability for network-wide inventory performance, • Opportunity to influence strategic decisions and operational improvements, • Continuous focus on efficiency, cost savings, and service excellence, • Collaborative culture that values innovation, accountability, and teamwork About Our Companies Parksite Parksite is a premier sales, marketing, and distribution company serving the building industry with a focus on both interior and exterior products. We supply top fabricators and building material dealers with category-leading products for residential, commercial, and remodeling markets. Our unique marketplace niche is education. We identify products with distinctive applications and educate architects, builders, and designers on their value. This approach has made us an industry leader with each product line we represent. We combine marketing expertise and industry knowledge to create demand for our supplier business partners. We help build brands. Atlantic Plywood Corporation (APC) Since 1974, Atlantic Plywood Corporation has delivered the highest quality and best value to our customers. This philosophy has helped us grow into a regional industry leader, distributing a wide range of quality hardwood plywood and panel products throughout the Eastern United States. Our many satisfied customers know that Atlantic Plywood offers not only dependable products and services but also a convenient, cost-effective partnership that helps their business grow. Career Growth Opportunities • Advance into senior supply chain, operations, or business unit leadership roles, • Take ownership of larger network optimization initiatives and strategic planning efforts, • Gain exposure to executive-level decision-making and long-term business strategy, • Develop expertise in cost reduction, logistics optimization, and inventory analytics, • Expand your leadership influence across multiple business units and functional areas Ready to Build Your Future with Us? Join a team where your hard work is recognized and rewarded. As a Parksite Associate, you'll gain valuable skills, work with quality products, and become part of an employee-owned company that invests in your success. We are Equal Opportunity Employers committed to building diverse and inclusive teams. How to Apply If you're ready to join a dynamic team in the wholesale building materials industry, we want to hear from you! Apply today and take the first step toward a rewarding career with growth potential. Qualifications are a guide, not a checklist. If you think you can make an impact here, we want to hear your story.

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. About the Role: The Controls Engineer position blends strong controls engineering expertise with hands-on manufacturing engineering to improve automation, equipment reliability, and production efficiency. This role requires deep technical knowledge of PLC programming, CNC programming and setup, robotics, and industrial automation systems combined with a strategic mindset for driving continuous improvement and digital manufacturing initiatives. The Controls Engineer will play a critical role in designing, integrating, troubleshooting, and optimizing automated manufacturing systems across molding, machining, assembly, and secondary operations. This individual will partner with Operations, Maintenance, Quality, and IT teams to implement robust control systems, modernize equipment connectivity, and support the plant’s Industry 4.0 and automation roadmap. This role is ideal for someone who thrives at the intersection of controls engineering, manufacturing process development, and continuous improvement. What You’ll Be Doing: • Design, program, and maintain PLC-based control systems for automated manufacturing equipment, assembly cells, robotics, and material handling systems, • Support CNC programming, setup, and process optimization for machining operations to improve cycle times, repeatability, and product quality, • Lead automation integration projects, including robotics, vision systems, automated inspection, and secondary operations, • Troubleshoot and resolve equipment controls issues across production lines to minimize downtime and improve equipment reliability, • Develop and standardize control architectures, electrical schematics, and automation documentation, • Collaborate with maintenance and operations teams to support equipment upgrades, retrofits, and preventative maintenance strategies, • Integrate machines and automation systems with plant data systems, machine monitoring platforms, and digital manufacturing tools, • Partner with cross-functional teams to support new product launches, equipment installations, and process validation, • Implement data collection and automation technologies that improve production visibility, traceability, and decision-making, • Support the development of standard operating procedures, control logic documentation, and training materials for automated systems, • Evaluate and implement automation and robotics opportunities to improve safety, throughput, and cost competitiveness, • Work with external automation vendors, integrators, and OEMs to deliver reliable and scalable automation solutions Why This Role Matters This position is instrumental in advancing the plant’s automation capabilities and supporting the transition toward connected, data-driven manufacturing systems. By combining deep technical controls knowledge with manufacturing engineering expertise, this role will help drive improvements in safety, equipment reliability, throughput, and overall operational excellence. We would love to hear from you if: • Bachelor’s degree in Electrical Engineering, Controls Engineering, Mechanical Engineering, or Manufacturing Engineering, • 5+ years of experience in industrial automation, controls engineering, or manufacturing engineering, • Strong experience with PLC programming (Allen-Bradley, Siemens, or similar platforms), • Experience programming or supporting CNC machines (Mastercam, NX, Fanuc, Haas, or similar), • Hands-on experience with industrial robotics, motion control, and automation systems, • Knowledge of industrial networking and communication protocols (Ethernet/IP, Profinet, Modbus, OPC), • Experience with electrical schematics, control panel design, and troubleshooting electrical systems, • Familiarity with machine vision systems, sensors, and automated inspection technologies, • Experience integrating equipment with MES, SCADA, or machine monitoring systems, • Strong problem-solving ability with a hands-on approach to manufacturing challenges, • Excellent communication skills and ability to collaborate across engineering, operations, and maintenance teams Preferred Experience: • Experience in plastic injection molding, machining, or high-volume automated manufacturing Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job DescriptionDescription: Position Summary The CNC Supervisor is responsible for driving advanced process optimization across CNC machining operations, with a primary focus on reducing cycle times, improving productivity, and ensuring robust, repeatable processes. This role also leads the development of process flows and manufacturing strategies for new work, from concept through full production release. The engineer will serve as a technical expert, mentor, and key contributor to continuous improvement initiatives across the manufacturing organization. Duties and Responsibilities • Leads efforts to analyze, optimize, and standardize CNC machining processes to reduce cycle times, improve throughput, and increase machine utilization., • Develops and implements advanced machining strategies, optimized toolpaths, and cutting parameters using modern CNC programming software., • Designs and documents end-to-end manufacturing process flows for new parts, including routing, workflows, setup strategies, tooling selection, and inspection plans., • Evaluates and selects tooling, fixturing, work holding systems, and automation solutions to support efficient and scalable production., • Conducts complex time studies, capability analyses, cost-reduction reviews, and root-cause investigations to drive continuous improvement., • Collaborates closely with machinists, programmers, quality engineers, and production management to troubleshoot issues and validate processes on the shop floor., • Champion the introduction of new tooling technologies, machining techniques, and industry best practices., • Leads NPI (New Product Introduction) activities for CNC-machined components, ensuring manufacturability, repeatability, and compliance with quality standards., • Develops and maintains high-quality documentation, including standard operating procedures, setup instructions, process control plans, and PFMEAs., • Fixturing design concepts., • All other duties as assigned. Requirements: Position Qualifications • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related field; or equivalent technical experience., • Mastery of CNC programming(G-Code) and CAM tools., • Expert-level knowledge of machining fundamentals, cutting tool technologies, feeds and speeds, and GD&T., • Proven track record of reducing cycle times and improving machining efficiency in a production environment., • Experience designing complete manufacturing workflows and process flows for new parts., • Strong understanding of lean manufacturing, Six Sigma, and continuous improvement methodologies., • Excellent communication, leadership, and cross-functional collaboration skills., • Experience in high-precision or regulated industries such as aerospace, medical device, or automotive preferred., • Knowledge of automation systems, in-process probing, and advanced metrology preferred., • Ability to use data analytics tools to drive process insights and improvements preferred.

Job DescriptionCompany Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe home is more than just a place - it should be a source of creativity, comfort, and connection. From beautiful walk-in closets and entertainment centers to versatile pantries and home offices, we design custom storage solutions that add value to your life and home by making space for what belongs. Think of it as 'practical magic.' Job Description The Design and Sales Consultant provides an in-home customer experience by designing and selling cabinetry, closets, home offices, garages, media centers, and other storage solutions for homes. This position includes selling, designing, measuring home spaces, and providing an exceptional experience. Duties and Responsibilities: • Design organization units for customers utilizing our proprietary CAD software program., • Utilize a consultative sales approach to meet monthly sales goals., • Visit customers' homes for a needs analysis and to design a storage unit, • Participate in meetings and training sessions, • Continuous follow-up with the customers and collaboration with the installation team to ensure job completion., • Pursue referrals and repeat business., • Meet or exceed monthly and annual sales related goals and targets., • This is a full-time (40 hours/ week) opportunityQualifications Qualifications • Interior design education, direct industry experience, or proven passion for home décor., • Manage and engage customers through an exceptional experience where the consultant is the reason for repeat clients., • Professional and assertive, consultative sales skills., • Advance knowledge of Microsoft suite and experience working with laptops, tablets, and other electronic devices., • Previous experience with CAD or design software is a plus., • The ability to be consistently inspiring and create delightful customer and brand experiences., • Confidently be able to sell and promote a product., • The ability to be creative, yet meticulously detail-oriented with a sense of craftsmanship., • Team player with the ability to manage a portfolio of projects and clients of different complexity in a dynamic environment. Additional Information Find us on Facebook, YouTube, and Instagram We are an equal opportunity employer. We E-Verify. All your information will be kept confidential according to EEO guidelines. Terms and Conditions: Privacy Policy: Terms and Conditions:

Job Description ABOUT US: ShiftHop, LLC. is a technology services company for healthcare professionals and healthcare facilities. Our mission is to bring the PRN/gig-work to the healthcare field, allowing for decreased staffing shortages in the healthcare field. We empower healthcare professionals to become independent of their full-time job, by offering credentialing services and a clear path for becoming an independent contractor. With ShiftHop, healthcare professionals can find work 24/7, working whenever, wherever, and however often they’d like. ROLE AND RESPONSIBILITIES: ShiftHop is looking for a Facility Success Manager to join our team in our Rochester, NY office. This person will operate as the lead on all critical healthcare facility accounts. The focus of this vital role is to manage the relationship with healthcare facilities by creating a positive working relationship. The Account Manager is responsible for addressing client issues and responding to questions. The ideal candidate comes with experience in account management and developing new business opportunities among both existing and new customers. Excellent cross-functional experience working with customer service and product development to improve the entire customer experience is a critical factor in this role. • Oversee customer account management – Includes developing new business along with negotiating contracts and agreements to maximize profits., • Collaborate cross-functionally – Work closely with the sales team to achieve quotas while keeping clients satisfied and engaged with products and services., • Bachelor's degree in Business, Sales or related field, • Strong verbal and written communications skills, • Excellent listening, negotiation, and presentation abilities, • Familiarity with CRM software preferred, • Proven ability to juggle multiple account management projects at a time, while maintaining sharp attention to detail, • Demonstrable ability to communicate, present and influence key stakeholders at all levels of an organization, including executive and C-level, • 100% employer paid medical, dental and vision (MVP Healthcare), • 100% employer paid life insurance, • 100% short and long-term disability, • 401k matching up to 10% annually, plus eligibility for immediate vesting, • Same day pay option, • $500.00 annual fitness credit Powered by JazzHR A5OB3dR2g3

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. job purpose: The Warehouse Automation Engineer will be responsible for leading the technical execution of the automated warehouse systems, providing support on electrical distribution systems, controls upgrades, start-up & commissioning of equipment, automation documentation, and data collection. They will manage, coordinate, and oversee process technology improvements, troubleshoot controls, and engineer design solutions to complex problems. This individual will provide day-to-day technical support on warehouse control systems and control related tasks. responsibilities: • Work with the warehouse equipment OEM, Electric 80, operations business partners, and engineering to optimize warehouse automation equipment, including high-density AS/RS and LGVs, • Serve as a subject matter expert for all warehouse automation user interfaces, HMIs, alarm codes, and resets, • Own all WCS integrations with host system (D365), line management system signal exchanges, and reporting tools (e.g., power BI), • Manage e80 OEM embedded engineers, including a shadowing program their maintenance and service routines for knowledge transfer, establishing a steering committee for improvement projects, and monitoring performance, • Provide recommendations and user influence to our maintenance team to help shape preventative maintenance routines, on-hand spare parts lists, and service scheduling, • Lead training on operation of automated equipment, resetting alarms, troubleshooting, and safety features., • Manage strategic, technical projects and tasks in an extremely fast-paced environment, • Function as an SME for warehouse controls systems, automation components and infrastructure, • Continuously improve warehouse control systems through Advanced Process Control, Alarm Management, and Operator Interface Optimization, • Responsible for integration of PLCs, HMIs, VFDs, Servo Drives, and process controls, • Responsible for the standardization of control systems and control logic designs, documentation of operation procedures and as-built drawings and logic, • Serve as plant liaison for new system start-up and commissioning by all outside controls contractors and system integrators to ensure proper transfer of documented PLC program changes and adequate training on the installation/changes that have been completed, • Develop, troubleshoot, Improve and Maintain automation documentation (schematics, functional descriptions, PLC programs, SCADAs, etc.), • Conduct reviews of application design with site and project teams to ensure that the automation requirements have been adhered to., • Warehouse automation troubleshooting, • Manage Automation improvement projects, • Mentor/train Instrumentation & Controls Technicians, • Bachelor's degree in Electrical/Electronic Engineering or Technology preferred, • 8-10 years of manufacturing automation experience required, • Experience with warehouse automation is required. Experience with e80 systems is preferred., • Additional training as an industrial automation technician preferred, • Ability to understand, modify and upgrade PLC logic (Rockwell platform), VFD's, network switches, • Ability to update P&ID's, electrical/mechanical prints (CAD/SolidWorks preferred), • Skilled in examining and re-engineering operations and procedures, formulating policy, and developing and implementing new strategies and procedures, • Strong interpersonal and communication skills and the ability to work effectively with a wide range of constituencies in a diverse community, • Ability to analyze and assess training and development needs, • Knowledge of computerized information systems used in quality assurance, maintenance, and ERP applications, • Able to understand and utilize engineering drawings, operating manuals, and blueprints to conduct business, • Able to stand for extended periods of time, lift a minimum of 40 lbs. on an occasional basis, and able to climb ladders and work at elevations of 75 feet, • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment, • 8-12 hours sitting/standing/walking, • Ability to lift up to 25 lbs., • Frequently reaching from floor level to shoulder level done during 8-hour workday, • Exposure to ammonia, acids, caustics, chlorines, paints, particles, oils and lubricants, steam, pneumatics, fumes., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected. At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential reports to: Engineering and Reliability Manager, Packaging travel requirements: Up to 25% through onboarding, then less than 5% exempt/nonexempt: exempt base pay range: $120k to $140k *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$120,000—$140,000 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description Director of Operations/Plant Manager Rochester, NY At RPI, we are transforming how products are created, produced, and delivered worldwide through a technology-driven, print-on-demand manufacturing platform. Every day, our cloud-based systems power millions of personalized, on-demand products that reach customers with speed, quality, and sustainability. We partner with leading brands, publishers, and creative platforms, including Blurb.com, our consumer-facing self-publishing brand, to bring ideas to life at global scale through a distributed manufacturing network. We are seeking a strategic, hands-on Director of Operations / Plant Manager to lead our Rochester, NY manufacturing facility. Reporting to the Senior Vice President of Global Manufacturing, you will own site performance across safety, quality, delivery, cost, and people. The right leader brings urgency, accountability, and a consistent presence on the production floor. You will lead day-to-day operations, build strong frontline leadership, and deliver results across core KPIs including volume, capacity, quality, safety, and on-time delivery. Success requires someone who thrives in fast-paced environments, leads through change, and brings clarity, energy, and empathy to the work. Duties / Responsibilities Ownership & Floor Presence • "Acts with Ownership" by demonstrating a deep connection with staff through regular, visible engagement on the plant floor-acting as a problem-solver, mentor, and motivator., • Takes personal accountability for achieving operational goals and fostering a culture of ownership among team members., • Meets cost objectives for the operation; achieves productivity targets, minimizes overtime, and monitors discretionary spending. Goal-Oriented Leadership • Demonstrates strong leadership skills to effectively manage teams in achieving organizational objectives., • Sets ambitious yet achievable targets for volume, capacity, quality, and delivery., • Rigorously tracks progress, adapt strategies proactively, and relentlessly pursue continuous improvement and ensure sustainability to meet and beat all performance metrics. Operational Excellence & Problem Solving • Spends significant time on the operations floor addressing issues in real time, removing barriers, and helping teams improve workflows and productivity., • Uses a data-driven approach to identify root causes and implement sustainable solutions., • Establishes and drives standard work adherence. Quality & Service Level Agreements • Ensures quality standards are being met to provide our customers defect-free product., • Meets on-time delivery commitments to our customers. Staff Development & Engagement • Builds, develops, and retains a high-performing team by connecting deeply with staff, understanding their challenges, and fostering a collaborative environment that values their input and growth., • Plans, assigns, and directs work; appraises performance; rewards and disciplines employees; addresses complaints and resolves problems. Safety & Culture • Lead safety initiatives with a personal commitment to creating a safe, incident-free workplace., • Promote a positive, proactive safety culture through engagement and open communication. Strategic & Tactical Alignment • Develop and execute manufacturing strategies aligned with business goals., • Lead regular review sessions to ensure KPI targets are met, and strategies are adjusted dynamically based on operational needs. Productivity & Capacity Optimization • Drive efforts to improve cycle times, reduce waste, and leverage lean principles to maximize capacity and throughput without compromising safety or quality., • Establish and maintain staffing plans for operations to meet business objectives. Cross-Functional Collaboration • Partner closely with sales, marketing, engineering, supply chain, HR, and finance to align activities, optimize resource allocation, and meet customer expectations. Benchmark & Innovate • Continuously benchmark against best practices and incorporate innovative approaches to keep the operation at the forefront of the industry. Required Skills/Abilities • Bachelor's Degree in Operations, Business, Engineering, or a related field, MBA a plus, • 8+ years of progressive manufacturing leadership experience, ideally in digital printing, book/card finishing, or high-volume print environments, • Experience in managing P&L responsibilities, • Proven success in leading teams through relocations, transitions, or high-growth phases, • Strong presence on the floor with a hands-on leadership style that inspires trust and action., • Expertise in lean manufacturing, continuous improvement, and KPI-driven operations, • Ability to coach and engage frontline staff while building a leadership pipeline, • Knowledge of OSHA regulations and best practices in workplace safety, • Excellent communication and relationship-building skills across all levels and functions, • Comfortable with data, systems, and metrics to drive effective decision-making Physical Requirements • Ability to lift up to 50 lbs regularly, • Ability to bend, stoop, climb, reach, and balance during routine work, • Ability to stand, sit, and walk throughout the entire shift About RPI RPI Print, headquartered in Seattle, WA, with locations across the U.S. and Europe, is dedicated to helping brands succeed through personalized, on-demand print solutions. With a global network of facilities and partners, we deliver end-to-end, integrated supply chain services that bring digital printing to life at scale and on time. Sustainability is at the core of how we operate. From responsible sourcing to reducing waste across our processes, we're committed to minimizing our environmental impact while delivering high-quality, customized products. More than just print, we're committed to building lasting relationships and delivering exceptional value to our customers! If you believe you're a good fit for this role and share our passion for excellence, we'd love to hear from you!

Job DescriptionSalary: $115,000 - $130,000 Who we are: Over 600 employees strong, Asure sees Human Capital Management (HCM) through the lens of entrepreneurs and executives with an owners mentality. We help businesses develop their Human Capital to get to the next level, stay compliant, and allocate their time, money and technology toward growth. Our HCM platform empowers more than 80,000 clients to build great teams and better manage their people while staying compliant in an ever-changing HR legislative landscape. Asures HCM offering includes Payroll & Tax, HR, and Time & Attendance software and HR Services ranging from online compliance tools to a fully outsourced HR department. This position can be based near any of Asure's hub office locations. Flexibility for hybrid arrangements may be considered. The Growth Manager serves as the dedicated marketing partner for an assigned sales teamfunctioning like a fractional marketing manager for that business segment. This role blends strategy, content creation, campaign execution, and sales partnership. Growth Managers understand their target market deeply, build the content and programs their sales teams need, and collaborate across the organization to deliver consistent pipeline results. They are both hands-on creators and skilled coordinators who know how to leverage internal resources, agencies, freelancers, and AI tools to get high-quality work done fast. What Youll Do • Act as the primary marketing partner for a specific sales team, developing a deep understanding of their markets, customers, challenges, and revenue priorities., • Create and execute marketing programs that drive awareness, generate qualified opportunities, and support sales motions., • Produce versatile marketing content from educational assets and articles to tools, resources, and campaign materials using both your own skills and support from internal teams, agencies, freelancers, and AI., • Equip SDRs and Sales Executives with the messaging, lists, insights, and resources they need to engage prospects effectively and consistently., • Build and manage outbound, nurture, and targeted campaigns tailored to your sales teams goals and ICPs., • Drive engagement across digital channels, including social media, to amplify visibility and spark conversations with prospects and industry voices., • Plan and promote virtual and in-person events such as webinars, workshops, and roundtables that support your teams pipeline goals., • Monitor performance metrics, interpret trends, and communicate results in a clear, actionable way to sales and marketing leadership., • Frequently join customer and prospect calls to stay connected to real-world needs and refine marketing strategy based on direct insights., • Partner cross-functionally with Product, Operations, Customer Support, and other marketing teams to ensure consistency and alignment across all go-to-market initiatives. Qualifications • Bachelors degree preferred; equivalent experience considered., • 37+ years in growth marketing, demand generation, content marketing, or a similar marketing role., • Strong ability to research, write, and produce high-quality content across formats., • Experience building and executing multi-touch marketing campaigns in a B2B environment, SaaS and/or HCM industry experience is strongly preferred., • Comfortable working closely with Sales Development Representatives and Sales Executives., • Experience with Salesforce, HubSpot, SalesLoft, or similar platforms., • Strong analytical thinking; able to interpret performance data and adjust strategies accordingly., • Highly organized, proactive, creative, and able to manage multiple initiatives in parallel., • A collaborative mindset with the ability to influence and support cross-functional teams., • Self-starter with a builder mentality energized by autonomy and ownership. Compensation The base salary range for this role is $115,000 - $130,000 based on relevant experience, skills, and industry knowledge. Asure Software offers a variety of employee benefits. Salary information is determined by market location and is provided in accordance with state and local pay-transparency laws. Applicants should apply via . Benefits • Medical, Dental, Vision, HSA, FSA- All effective on day 1!, • Company paid Basic Life Insurance, A+D, Long-Term Disability, and Short-Term Disability, • 401K Program with 3% safe harbor contribution, • Employee Stock Purchase Program, • Fitness Reimbursement Program, • Self-Managed PTO Our Mission To provide Human Capital Management (HCM) software and services that help companies grow, while nurturing a culture of growth around us. • Helping customers grow by getting the most from their human capital., • Helping our employees grow personally and professionally., • Growing relationships in our communities that inspire goodness., • Grow shareholder value Our Vision Be the most trusted Human Capital Management resource to entrepreneurs everywhere. Our Values Reflect who we are and what we stand for as a company. • Embrace Change, • Lead with Integrity, • Own the Outcome, • Deliver Awesome, • Be a Good Human We are an equal opportunity employer. All candidates must be legally authorized to work in the US, as we are unable to sponsor or transfer Visas at this time. Criminal background checks conducted at employment offer. NO AGENCIES PLEASE Any unsolicited resumes sent to Asure Software from a third party, such as an Agency, including unsolicited resumes sent to Asures mailing address, fax machine or email address, directly to employees or hiring managers will be considered Asure property. Asure will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

Job Description Position: Material Control Specialist Location: Rochester, NY Employment type: Part-time, Non-exempt Compensation: $20-$25/hour About Us Conexa Technologies is a subsidiary of CS Contract Solutions, LLC., a leading telecommunications vendor in the United States. One of our specialties is long-term, project-based staffing solutions. Our network spans 24 states, employing over 350 technicians, engineers, and construction specialists for both outside and inside plant projects. Our team works diligently to uphold our standard of excellence. Why Work for CS Contract Solutions? At CS Contract Solutions, our mission is to empower our employees to deliver exceptional results through innovation, collaboration, and unwavering commitment to excellence as we work together to build out the nation's fiber optic networks of tomorrow. We strive to cultivate a culture that fosters creativity, integrity, and continuous learning. What we offer • Competitive base pay, • Ongoing training and development, • Opportunities for career growth and advancement, • A dynamic and supportive work environment Our Core Values At CS Contract Solutions, we operate under a defined set of core values. To work here, you'll need to align with them--these are more than words on a wall; they guide how we show up every day: • Honesty and Integrity, • Attitude over skills, • Courage in Communication, • The 3 Es: Effort, Energy, and Execution, • Keep Your Axe Sharp What we're looking for The Material Control Specialist position is a part-time role based in Rochester, NY and will focus on inventory management within the Rochester warehouse as well as transportation of materials from Connecticut. Other responsibilities for the Material Control Specialist may include customer service, requisitioning, Inventory management and all related system transactions for the provisioning of this material. The ideal Material Control Specialist takes pride in doing their best every day to deliver a quality product; anticipates customers’ needs, offering solutions for today and tomorrow; and listens to understand and not to respond. Responsibilities • Must be fully trained and familiar with every function involved in the daily operations of the storeroom., • Process orders timely and accurately for customer’s needs., • Process material transactions and annual inventory efficiently through PeopleSoft., • Manage the logistics of repaired materials, warranty check and ensures equipment is repaired in a timely fashion., • Maintain inventory levels in the most efficient and cost-effective manner., • Unload and receive materials, including central office, business systems, exempt, miscellaneous project and Outside Plant materials including cable, poles, and steel pipe, and other materials as required., • Process requisitions for materials needed by employees and contractors as directed by management., • Handle customer needs at the counter and/or cable yard timely and efficiently., • Notify other departments/customers upon arrival of ordered materials., • Receive, clean, and store used or returned items and/or equipment taken out of service and returned to inventory., • Operate the forklift in a safe and efficient manner; maintain forklift certifications., • Maintain storeroom shelves and cable yard in a neat and orderly fashion. This includes the efficient arrangement of all materials in both the storeroom and cable yard. The materials are to be stored in a systematic manner so all personnel can effectively work in the area., • Drive company vehicle when required., • Package, label and ship materials to other locations as required. Maintain all logs accurately., • Assist other areas of the Purchasing & Material Control department as required or as directed by Management., • Perform all tasks in a safe manner. Wear appropriate clothing including but not limited to hard hats and steel toed safety shoes where required., • Move and/or lift weights of 100 pounds or more. The job may entail other physical demands/requirements not listed here which employees must be able to successfully perform as essential functions of this job., • May be required to oversee special projects and perform additional duties and tasks as required by the Company. Qualifications and Educational Requirements • High school diploma or equivalent such as the GED from an accredited educational institution., • Valid state driver’s license and satisfactory driving record, able to maintain insurance., • Certified Fork Truck Operator, or able to be certified within 30 days or at the earliest opportunity given availability of a trainer., • Strong written and verbal communication; mathematical and problem solving skills with regard to inventory, • Demonstrated Customer service and team building skills, • General computer skills required with the ability to operate Microsoft Word, Excel, and Lotus Notes email. Must be able to process material control and requisition transactions and perform general inquiries within PeopleSoft. CS Contract Solutions considers all applicants for employment without regard to race, religion, gender, sexual orientation, national origin, age, disability, or status as a US military veteran in accordance with federal law. In addition, we comply with applicable state and local laws prohibiting discrimination in employment wherever it maintains facilities. We also provide reasonable accommodation to individuals with a disability in accordance with applicable laws. CS Contract Solutions is committed to a drug-free workplace.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: This position is responsible for all personnel and equipment within the Packaging Department during the scheduled shift. The primary activities include but are not limited to administration of time and attendance for employees, equipment troubleshooting, operational program execution and development, achieving and tracking production goals, facility safety and quality awareness, and material and inventory tracking and monitoring. responsibilities: • Responsible for operator supervision, training and reporting on the daily operation of the packaging equipment which consists of blow molding, filling, sleeving, case packing, palletizing, and ancillary equipment needed for operations and cleaning., • Manage production lines through all aspects of schedule: production, sanitation, production changeovers, and planned shutdowns., • Lead Shift Hand Over Meeting (SHO) and attend Daily Directional Setting (DDS) meeting, • Handle and/or escalate any safety concerns that arise during shift including but not limited to identifying and reporting potential hazards, reporting near misses/incidents, acting as a first responder if trained or notifying first responder if needed, altering plans to mitigate risks., • Manage violations of company policies, procedures, and working rules through one-on-one coaching or reporting to the appropriate manager., • Communicate with other departments of changes to running conditions in a timely manner, and report problems encountered to the Packaging Manager, while following further instruction from management., • Interpret skills matrix and organize personnel based on business needs for the shift., • Be audit ready by having floors, drains, and conveyor systems cleaned regularly and inform management of findings as needed., • Complete and audit Master Sanitation Schedule (MSS), Centerline (CL), and Clean Inspect Lubricate (CIL) tasks on shift., • Check equipment to ensure proper CIP is executed on time and all equipment is ready for production at the end of CIP., • Initiate holds in adherence to Quality standards for both material defects and finished product goods while working with Quality and Warehouse teams on proper separation., • Manage the held product rework process for the team with guidance from the Quality team., • Verify packaging equipment is being maintained in perfect condition by maintenance. Ensure PM's and work orders are being written and executed by working closely with the maintenance department personnel., • Document and react to shift losses by performing Root Cause Analysis (RCA) to completion., • Take inventory of consumables supplies daily, ensuring sufficient quantities are maintained for planned production., • A Bachelor's Degree in a related discipline is preferred or six (6) years of experience in a leadership role; or an equivalent combination of education and experience are required., • At least one (1) year of food/beverage industry manufacturing experience. Dairy industry with both ESL and Aseptic experience is highly preferred., • Ability to handle ambiguity and demonstrate success in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: • 12 hours sitting/standing/walking around the production floor, • Ability to lift up to 40 lbs of materials, • Reaching/bending requirements including climbing ladders or elevated areas, • Hand dexterity for operating machinery or computer systems, • Exposure to hazards (machinery noise, confined spaces, chemical handling, etc.), • Wearing PPE such as safety glasses, hearing protection, and slip-resistant boots, • Specific atmospheric conditions and environmental factors, • Any other physical requirements including desk work, meetings, and data entry food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential position location: Webster, NY reports to: Packaging Manager travel requirements: <10% *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$80,000—$90,000 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionDescription: Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. We give our employees what they need to succeed, including great benefits and perks! We offer medical, dental, vision, life, disability, and a 401(k) match, as well as perks that support you, your family, and your finances. And if it’s career development you desire, we provide that, too! At Paylocity, people matter most and have always been at the heart of our business. As part of the Sales & Marketing team, you’ll help us solve challenges and succeed as you grow and understand the unique needs of our clients and tailor easy-to-use solutions to deliver the performance they need. With a position in Sales & Marketing, you’ll strengthen our relationships with clients, anticipate their needs, and think outside the box to unlock new possibilities. Position Overview The Outbound Growth Account Executive is responsible for prospecting, developing, and closing new sales agreements for companies with up to 50 employees. The Outbound Growth Account Executives at Paylocity works in office in a fast-paced business environment that is highly competitive and quota-driven. The best Outbound Growth Account Executives are hunters and field warriors, capable of creating their own activity in the field to drive revenue. A strong predictor of success for an Account Executive, is someone who incorporates a consultative approach to their sales technique, has exceptional prospecting skills, and can execute a consistent sales process. Primary Responsibilities The below represents the primary duties of the position, others may be assigned as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Execute the full sales process with every assigned lead. · Conduct virtual product demonstrations showcasing the full Paylocity technology stack. · Determine prospective clients’ HR and payroll needs and present tailored solutions. · Prepare and deliver proposals and maintain timely follow-up throughout the sales cycle. · Generate new business through outbound efforts including telemarketing, referrals, networking, and personal/professional contacts. · Build and maintain relationships with partners and other referral sources. · Organize, complete, and obtain required documentation for conversion from prior payroll providers to Paylocity. · Partner cross-functionally with internal teams to ensure smooth client transitions. · Maintain accurate activity, forecast, and pipeline reports as requested. · Stay current on HCM trends, product knowledge, and industry changes. · Attend weekly meetings and trainings on site. · Meet or exceed monthly, quarterly, and annual sales quotas. Other duties as assigned. Education and Experience • High school diploma or equivalent required; bachelor’s degree or military service preferred., • 1–2 years of proven success in a sales role., • Experience with CRM systems (e.g., Salesforce, Microsoft Dynamics)., • Strong written, verbal, and virtual presentation skills., • Ability to thrive in a competitive, high-activity sales environment., • Strong organizational and time management skills., • Critical thinking and sound decision-making skills, especially when handling objections or unexpected situations., • Ability to manage administrative components of the sales cycle (documentation, file management, contract coordination)., • Customer service orientation and ability to build strong internal and external partnerships., • Proficiency with MS Office applications and general internet usage., • Must report to an approved Paylocity location., • Ability to sit, stand, walk, and interact in an office or virtual environment., • Ability to operate standard office equipment and use a computer for extended periods., • Manual dexterity for keyboard use and handling small objects., • Sensory ability to see, hear, and communicate clearly., • Mental focus for reading, writing, analysis, and complex decision-making. To request reasonable accommodation in the job application or interview process, please contact . This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed. The pay range for this position is $50,000 - $80,000/yr; however, base pay offered may vary depending on job-related knowledge, skills, and experience. This position is eligible for an annual bonus and restricted stock unit grant based on individual performance in addition to a full range of benefits outlined here. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Applicants should apply via . Your personal data will be processed for recruitment purposes in accordance with our Notice of Privacy Practices for Job Applications and applicable data protection laws Requirements:

Job Description STATUS: Full-time / Exempt REPORTS TO: Director of Member Service Center LOCATION: Rochester, Corporate Office COMPENSATION: The starting salary for this position is expected to be between $80,000 - $85,000. The actual salary will be determined based on experience and other-job related factors, consistent with applicable law. HOURS: 37.5 hours per week, including Saturdays (as needed) SCHEDULE: Monday – Friday 8:00am – 5:00pm, Saturday 8:00am – 2:00pm Position Summary The Manager, Member Service Center reports to the Director, Member Service Center, and is responsible for overseeing and assisting in the development of the Supervisor, Team Leads, and Member Service Center Representatives. This individual is responsible for providing high level support to team leadership and staff on escalated member service issues and inquiries, and for ensuring successful achievement of department sales and member service goals. Additionally, the individual is responsible for optimizing technology to ensure operational efficiencies and supporting strategic initiatives. Performs all responsibilities in a manner that serves The Summit’s Mission and upholds the credit union’s values. Essential Responsibilities – Responsible for the daily performance of the call center, ensuring that the team provides secure, compliant, and top-tier service for all account-related inquiries. Strategic Responsibilities: · Operational Excellence: Oversee daily workflows to ensure service level agreement (SLA’s) are met for the staff and call overflow vendor by managing staffing levels based on peak call volume trends. Monitor and provide guidance on member communications, via the Member Service mailbox, Live Engage (Chat), and social media platforms provided by the Marketing Department. · Compliance & Risk Management: Ensure 100% adherence to financial regulations and internal security protocols to protect sensitive customer data. · Performance Analytics: Analyze call data and KPIs to identify bottlenecks, reporting weekly/monthly performance trends to executive leadership. Utilize the Work Force Management system to review and approve the monthly MSC staffing schedule ensuring that it meets the staffing needs of the department. Monitor daily and respond, as needed to any unexpected volume or staffing events · Process Improvement: Partner with the Member Service Center Director, IT and Product teams to streamline the "customer journey," reducing friction in account authentication and common transaction workflows. Leadership & People Management · Culture Building: Cultivates an engaged and high-performing team environment where employees feel empowered, valued, and motivated to excel. Provides clear direction, expectations, and regular coaching to develop team capabilities and drive consistent performance. Maintain high employee morale and retention in a fast-paced environment through engagement initiatives and transparent communication. Collaborate with and be responsive to others, in daily interactions and on shared initiatives, with a focus on building respectful and professional relationships with colleagues in all areas of the credit union. · Mentorship: Directly manage and coach leadership staff to drive professional growth and high performance. Monitor service quality by resolving complex cases, focusing on Creating Member Loyalty (CML), compliance and identity verification, to optimize the member journey. · Escalation Management: Directly manage high-risk escalations and complex member grievances as the final point of contact. You will champion the recovery of member satisfaction by providing immediate, high-level conflict resolution that aligns with credit union values and preserves member retention. · Data Support: Provide daily, weekly, and month-end reports, identifying trends, providing support for service recommendations. Required Qualifications · Experience: 5+ years of experience in call center management, specifically within banking, credit unions, or fintech. · Regulatory Knowledge: Deep understanding of financial industry standards and privacy laws (e.g., Gramm-Leach-Bliley Act). · Technical Savvy: Expert-level experience with Workforce Management (WFM) tools, IVR systems, and CRM platforms (e.g., Salesforce or Genesis). In coordination with and under the direction of the Director, serve as an administrator/advanced user role for all member service-related software systems and programs. Participate in testing, provide support, and make recommendations on new technology, as necessary. · Education: Bachelor’s degree in finance, Business Administration, or related field. Key Performance Indicators (KPIs) The success of this role is measured by: · Service Level: % of calls answered within X seconds. Monitor and assess key performance indicators and relevant departmental statistics (such as Chat, call volume, MSC email, member experience (XP) responses, abandonment rates, schedule adherence, branch support, and quality service) to Director, as well as to Senior Leaders · Net Promoter Score (NPS): Overall customer loyalty and satisfaction. Employ Creating Member Loyalty, service standards and Member Engagement tools to ensure high employee performance and extraordinary member experience. · Cost Per Contact: Balancing high-quality service with operational budget constraints. · Attrition Rate: Keeping agent turnover below industry benchmarks. Other Responsibilities · Complete requests and projects on a timely basis, as assigned. · Serve as a backup call representative during peak times. · Perform duties of Member Service Center staff member as needed. · Perform other various duties as assigned. Qualifications and Skills Education & Experience - Applicants must possess the following qualifications or an equivalent combination of education and experience: · Education: Bachelors’ degree in a related field · At least 5 to 7 years’ professional experience, with at least 3 - 5 years in management/leadership position, preferably in a busy call center and/or high performing financial institution. Likewise, 3-5 years prior sales and service experience focused on creating positive member/customer experiences, strongly preferred. Knowledge/Skills/Abilities (including Technical & Systems/Equipment Proficiencies) · Excellent verbal and written communication skills, specifically, exhibiting a calm and reassuring demeanor to staff and members. · Proven ability to motivate, train/develop employees and inspire a team working environment. · Must possess aptitude for providing high level member service and problem resolution. · Strong interpersonal, analytical, and organizational skills. · Strong critical problem-solving skills. · Ability to handle confidential/sensitive situations in a professional manner. · Ability to manage and prioritize multi-functional tasks. · Advanced knowledge of Microsoft Windows and Office Suite, including Word, Excel, Outlook, & Power Point. Physical Requirements · Lifting (5-10 pounds) · Standing/Sitting extended periods of time, while working in front of computer monitor · Typing / Data Entry · Professional Office Environment · Overhead Lighting Training and Compliance Requirements · Subject to the compliance requirements of all related federal regulations, including but not limited to; the Bank Secrecy Act (BSA), Anti Money Laundering (AML), Information Security and Privacy policies and procedures. Employees complete annual BSA, AML, Information Security, Privacy and other job-related training requirements as established by the Summit and within deadlines. Licensure Requirements · In compliance with the Secure and Fair Enforcement for Mortgage Licensing Act of 2008 (S.A.F.E. Act) and the statute’s regulations, applicants must be eligible to register as a Mortgage Loan Originator (MLO). Candidates being considered will be subject to a credit check and fingerprinting. EQUAL OPPORTUNITY EMPLOYER: The Summit Federal Credit Union is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, protected veteran status, or status as a qualified individual with disability. Subject to the compliance requirements of all related federal regulations, including but not limited to; the Bank Secrecy Act (BSA), Anti Money Laundering (AML), Information Security and Privacy policies and procedures. Employees complete annual BSA, AML, Information Security, Privacy, and other job-related training requirements as established by the Summit and within deadlines. *Note: The above information on this job has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Works on the highest level, most complicated jobs. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Mentors and leads lower level employees. Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning set-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I, II, and III operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Advanced GD&T skills., • Basic and Advanced Vantage training., • Perform basic to complicated repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position may have team leadership responsibilities. Education, Training and/or Experience High school diploma, general education degree (GED), and/or technical school, associates degree; and five to seven years related experience and/or training; or equivalent combination of education and experience. Requirements: Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others! EEO Statement PGM will consider all individuals for any position for which they are qualified and able to perform. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, or national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, protected veteran status, or any other characteristic protected by law.

Job Description Join our growing team of Rochester, NY Brand Ambassadors!Renewal by Andersen is the full-service replacement window division of Andersen Corporation. We are united by the common goal of making a difference in the lives of our homeowners and the communities we serve. We are looking for Brand Ambassadors in the Rochester, NY area!Renewal by Andersen is looking for accomplished, driven, and collaborative candidates to help perfect our customers experience in upgrading their homes. Want to join our team?This position earns commission in addition to base pay. Your hourly rate will be $18/hr plus bonuses. The best part is that our team gets paid every week! On average, our employees make $23/hr. This team works Monday - Friday from 9am - 6pm. There are breaks throughout the day as well as a 1-hour lunch break. Base pay is based on several factors including but not limited to work experience, education, geographic location, certifications, etc. Your recruiter can share more about the specific compensation package for your preferred role during the hiring process.PURPOSE: This position is responsible for engaging in generating highly qualified leads by engaging in door-to-door canvassing. While doing so it is the responsibility of the canvasser to record accurate data regarding the information of prospective customers, and the targeted market area. As an innovative and industry-leading organization, we think of benefits more broadly. From your health care to your work environment, to your development and quality of life, we think beyond basic benefits to provide a total rewards package including, but not limited to:Medical/Dental/Vision/Life Insurance Paid holidays plus PTO 401(k) plan Professional development A culture that supports work-life balance An environment where collaboration is key Environmentally conscious business decisions 10,000+ employees and career opportunities nationwide RESPONSIBILITIES:o Vigorously and diligently work to generate leads while engaging in door-to-door campaigning in assigned territory generating qualified sales opportunities as instructed by the Canvassing Program Managero Utilize Renewal by Andersen mapping program, and business applications, to accurately keep records on house-to-house information and data tracking.o Be courteous, neat, clean and in proper uniform with required municipality permitting at all timeso Attend company meetings as required.o Communicate with Canvassing Program Manager ideas that can improve effectiveness of the canvassing program policies of Renewal by Andersen.o Master Renewal by Andersen methodology, product, and current promotional offerings. Become a Signature Service expert QUALIFICATIONS:o 1+ years of Customer Service Experienceo High School Diploma or equivalent requiredo Valid Drivers License with a clean driving recordo Reliable transportation to navigate to and from work o Strong verbal communication skillso Goal-oriented and self-motivatedo Able to navigate through multiple platforms on tabletso Physically able to stand and walk 3 to 5 miles a day CULTURE AND BENEFITS: Our vision is to make the world a better place by living up to the promise that everyone benefits from their association with Andersen. Were committed to making a difference through challenging ourselves each day, recognizing and rewarding success, taking pride in our work and honoring a legacy built on doing the right thing. There is great respect for life outside work so that you can bring your best self to work.We are committed to demonstrating mutual respect and appreciation of our similarities and differences so that each employee can realize his/her potential and we exceed our customers expectations.By applying to this job, I agree that I may be contacted at the number submitted, including by autodialed calls and texts, for informational and all other purposes by Renewal by Andersen, and its affiliated companies (collectively, RbA).We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.Company DescriptionThere’s no other home in the world exactly like yours, so you shouldn’t expect a one-size-fits-all solution when it comes to your new windows. Our hassle-free process was designed with homeowner satisfaction in mind. From design and sales through installation and service, your Renewal by Andersen team will be with you every step of the way—making it easy to know the project’s status and get answers to any questions you may have. Our window replacement process is broken down into four steps: • In-home consultation. Our design consultants listen to your needs and create a plan to improve energy efficiency and enhance your home’s beauty., • Measure and manufacture. Project Technicians ensure accuracy and answer any last-minute questions before sending in the order for your fully customized windows.

Job Description A Trusted CRO Partner for the Future of Eye Care iuvo Clinical is a full-service ophthalmology-focused contract research organization (CRO) dedicated to improving patient’s quality of life with breakthrough eye care therapies. We combine decades of specialized experience with a high touch, high science approach, partnering with innovators to accelerate ophthalmic breakthroughs from concept to commercialization. Whether advancing a novel retinal therapy or supporting a complex ocular device trial, we provide the expertise, flexibility, and personal dedication to ensure your clinical trial’s success. We offer a comprehensive benefits package and the opportunity to broaden your experience and grow your career! We currently have an exciting opportunity for a Clinical Research Associate to join our team! The Clinical Research Associate (CRA) is responsible for the monitoring of clinical research activities at research sites that are actively conducting clinical trials. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform site qualification, initiation, interim monitoring, and close-out visits per study-specific plans/requirements., • Review for regulatory and protocol compliance., • Review and verify informed consent forms and informed consent process., • Assess PI oversight of study activities., • Confirm accuracy and data integrity by reviewing eCRFs/CRFs, site source documents and other sources of study-specific site documents as applicable., • Complete timely and comprehensive site visit reports and associated correspondence per the trial-specific Monitoring Plan., • Adhere to trial-specific monitoring visit report submission, finalization, and associated correspondence timelines., • Identify and report protocol deviations and risks to subject safety/data integrity., • Generate queries and work towards query resolution with site personnel., • Perform investigational product and/or device, ancillary supplies, and equipment review/accountability as applicable., • Evaluate performance of and adherence to study protocol at the site level., • Evaluate overall performance of site and site staff, provide recommendations, and escalate issues as needed., • Provide initial site training and re-training as needed., • Monitor trial participant recruitment activities and progress., • Reconcile and facilitate adverse event and serious adverse event reporting and documentation as needed., • Review essential regulatory documents and compare them to study TMF to confirm completeness and accuracy., • Verify site study supply inventory is adequate as applicable., • Participate in the identification and selection of investigators and sites as applicable., • Serve as a liaison and resource for Investigators, Institutions, and Sites, providing support during the conduct of the clinical trial., • Attend internal and external team calls to stay informed of current study status and provide feedback/updates as needed., • Attend internal and external trial-level, line manager/department-level, and company-level meetings as applicable., • Provide In-House CRA and Site Start-up and Essential Document Specialist support for assigned sites as needed inclusive of but not limited to: Data line listing review/data cleaning activities prior to data locks, eTMF document workflow processing and maintenance of regulatory trackers., • Complete timely entry of data for assigned sites within trial level electronic tracking system as applicable (e.g., CTMS). Data entry/tracking is inclusive of but not limited to: Action Items, Site Visit status, Monitoring Visit Report and site correspondence, and PDs., • Maintain timely trial-level calendar updates for monitoring visits, travel, and out of office time, as applicable., • Promptly submit time and expense reports within specified electronic system and adhere to trial-level budget requirements. Escalate issues as needed., • Maintain a working knowledge of ICH/GCP Guidelines, medical terminology, and relevant FDA regulations., • Timely completion, review, and understanding of iuvo SOPs, work instructions and guidelines, and any sponsor-specific requirements., • Ability to work across multiple trials as needed., • May mentor other internal study-team members., • May assist with development of study manuals, plans, CRFs, and other study-specific tools/templates. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE • Bachelor’s degree or equivalent job experience, preferably in a life science, nursing, or related discipline required., • Minimum of two years onsite monitoring experience or applicable clinical research experience., • A diverse understanding of Ophthalmic indications, associated procedures and standards of Ophthalmic practice., • Strong working knowledge of GCPs and federal regulations., • Experience working with EDC, eTMF, CTMS and other clinical trial systems is highly preferred. Effective verbal and written communication skills required to interact with clinicians, clients, vendors, FDA Inspectors, and internal project team members through demonstration of: • Excellent presentation and interpersonal skills, including clear, succinct, and timely communication., • Sharing ideas in a constructive and positive manner., • Listening to and objectively considering ideas and suggestions., • Keeping commitments., • Keeping others informed of work progress, timetables, and issues., • Addressing problems/issues constructively to find mutually acceptable solutions., • Respecting the diversity of our work force in actions, words, and deeds. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit or stand at a desk, talk, and hear. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Office setting / remote home office. iuvo Clinical fosters a video-first environment; employees are expected to have their cameras on for all internal and external meetings, check-ins, and collaborative sessions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. LOCATION Remote; Near major airport TRAVEL Up to 75% travel DISCLAIMER This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. iuvo Clinical is an Equal Opportunity Employer

Job Description Staff Accountant (Direct Hire) TES Staffing is supporting a wholesale beverage distributor that supplies a wide range of beer, wine, and non-alcoholic products to retailers, bars, and restaurants Salary and Benefits: $60,000 – $65,000 + Growth Opportunity Benefits Package includes: Health (covered at 75%), dental, and vision insurance, Retirement plan, Life insurance, PTO and vacation time If you’re early in your accounting career and want more than just a job, this is your chance to join a tight-knit, fun, and genuinely supportive team where people like coming to work. This isn’t your typical accounting environment. Think: Dog-friendly office Friday product tastings A team that collaborates, laughs, and actually helps each other They’re looking for someone who’s not just technically capable, but someone who’s curious, collaborative, and ready to grow. Why This Role Stands Out • You’ll be part of a team, not stuck in a silo, • Culture is everything here, low ego, high support, • Opportunity to grow into more responsibility over time, • Leadership that understands training may be evolving and will support you through it, • Maintaining and reconciling general ledger accounts, • Reviewing and coding invoices (AP) and supporting payment processes, • Reconciling bank accounts and financial records, • Assisting with month-end close activities, • Supporting audits and gathering financial documentation, • Filing tax forms (state, local, and federal), • Open office with ~10 people, sometimes quiet, sometimes buzzing, • Social, friendly, and down-to-earth team, • Leadership is approachable and values input Who Will Love This Job • Someone early in their career who wants to learn, grow, and stay long-term, • Someone who values team culture just as much as the work itself, • Someone who isn’t afraid to ask questions and jump inCompany DescriptionTES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together!TES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together!

Job Description Banyan Software is the best permanent home for software businesses that serve specialized industries, their employees, and their customers. We are on a mission to acquire, build, and grow great companies worldwide, helping them modernize through shared AI expertise and operational discipline. The Banyan Software Foundation, endowed with $100 million in Banyan stock, leverages technology to build a greener and more equitable world. Banyan is Great Place to Work Certified, a five-time Inc. 5000 honoree, and a top 10 company on the Deloitte Technology Fast 500. Founded in 2016 and headquartered in Atlanta, Banyan operates more than 100 portfolio companies across North America, the UK, EU, and APAC. Director of Engineering Location: Hybrid - Rochester, NY About Alpine Software Alpine Software builds mission-critical software that empowers fire and EMS agencies to operate more effectively and serve their communities with excellence. Our flagship platform supports essential fire department operations with a fully integrated suite of mobile and desktop products. Trusted by departments across the country, our software plays a central role in helping public safety agencies streamline administrative workflows, maintain regulatory compliance, and ensure their teams are prepared to respond when it matters most. At Alpine, we are deeply committed to delivering reliable, secure, and innovative technology that supports first responders in their mission to protect lives and property. The Opportunity We are seeking a Director of Engineering to lead the modernization effort to transform our desktop application into a cloud-native, AI-enabled web platform. This is a rare opportunity to help lead the evolution of a proven public safety product into its next generation. You will work closely with an existing team that is currently driving the AI-forward replatforming initiative and eventually own the technical direction of continued modernization and development. This role will be critical in ensuring a smooth knowledge transfer, long-term architectural ownership, and continued innovation within our team. This position is ideal for a leader who enjoys building, mentoring, and driving meaningful technical transformation, especially in environments adopting AI-assisted engineering practices. What You'll Do Lead the Web Modernization Strategy • Partner with the modernization team to replatform our software to a cloud-native web architecture., • Guide the transition of long-term technical ownership into Alpine's engineering team., • Establish scalable architecture, standards, and engineering governance., • Contribute directly to backend and frontend development., • Lead architecture discussions and perform high-quality code reviews., • Mentor and develop mid- and junior-level engineers, helping manage a team of up to 4 direct reports across the strategic side of our business., • Champion and institutionalize AI-assisted development workflows., • Work within an agentic AI modernization model to accelerate legacy transformation., • Ensure the team is comfortable and effective using modern AI coding tools and automation practices., • Implement strong CI/CD and DevSecOps practices., • Ensure secure, scalable, observable systems in Azure. Frontend: React, TypeScript, Next.js Infrastructure & DevOps: CI/CD pipelines (e.g., GitHub Actions), Infrastructure as Code, Containerization (Docker/Kubernetes preferred) What We're Looking For • 8+ years of progressive software engineering experience., • 3+ years in a senior technical leadership role (Director, Principal, Manager, Staff+)., • Strong hands-on experience with C# / .NET, Azure cloud architecture, React / TypeScript, and SQL Server or PostgreSQL., • Experience modernizing or replatforming complex legacy systems., • Comfort working in AI-assisted development environments (e.g., Copilot, agent-based workflows, automated code generation, LLM-integrated tooling)., • Experience mentoring engineers and leading delivery execution., • Strong communication and collaboration skills.Nice to Have, • Experience rewriting legacy desktop applications (Delphi or Titanium SDK)., • Familiarity with fire, EMS, or public safety software., • Experience building or operating multi-tenant SaaS systems., • Experience working in fast-paced or startup-like environments., • Experience managing distributed teams in various locations.Why Join Alpine Software?, • Lead a high-impact modernization initiative., • Shape long-term technical ownership of a mission-critical platform., • Build software that directly supports first responders., • Work at the intersection of public safety and AI-forward development., • Help define how AI-assisted engineering transforms legacy enterprise software. Diversity, Equity, Inclusion & Equal Employment Opportunity at Banyan: Banyan affirms that inequality is detrimental to our Global Teams, associates, our Operating Companies, and the communities we serve. As a collective, our goal is to impact lasting change through our actions. Together, we unite for equality and equity. Banyan is committed to equal employment opportunities regardless of any protected characteristic, including race, color, genetic information, creed, national origin, religion, sex, affectional or sexual orientation, gender identity or expression, lawful alien status, ancestry, age, marital status, or protected veteran status and will not discriminate against anyone on the basis of a disability. We support an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. Recruitment NoticeBanyan Software may use artificial intelligence (AI) tools to assist in screening and/or assessing applicants during the recruitment process. All hiring decisions are made by our team. Personal information submitted through your application will be collected and used for recruitment purposes in accordance with applicable privacy laws. Contact us at any time with questions about our process or to request accommodation. Beware of Recruitment Scams We have been made aware of individuals fraudulently posing as members of our Talent Acquisition team and extending fake job offers. These scams may involve requests for personal information or payment for equipment. Protect yourself by following these steps: • Verify that all communications from our recruiting team come from an @banyansoftware.com email address., • Remember, employers will never request payment or banking information during the hiring process.

Job DescriptionDescription: Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. We give our employees what they need to succeed, including great benefits and perks! We offer medical, dental, vision, life, disability, and a 401(k) match, as well as perks that support you, your family, and your finances. And if it’s career development you desire, we provide that, too! At Paylocity, people matter most and have always been at the heart of our business. Help our award-winning technology company run effectively as you take on big challenges and find solutions with a position in Operations. Use your problem-solving skills to shape the way others see Paylocity. Launch your career with us! In-Office: This is a 100% in-office role based at any of our Schaumburg, Il - Meridian, ID - or Rochester, NY locations. Remote or hybrid work is not available for this position. Candidates must be able to work on-site five days per week during designated work hours. Tax Specialist I The Tax Specialist on the Balancing Team is primarily responsible for balancing the Payroll system to the Tax system and reconciling variances for new and existing customers. This role ensures that issues and errors are accurately identified and resolved while collaborating with internal and external partners to strengthen processes, controls, and deliverables. Primary Responsibilities The below represents the primary duties of the position; other duties may be assigned as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Responsible for tax reconciliation for cyclical processing and end-of-period activities, including researching and resolving demographic, wage, and liability errors and issues, • Collaborate with cross-functional teams to ensure sound tax services and deliver a high level of customer service, • Stay up to date on changes required to support tax reporting agencies, including taxability updates, • Participate in balancing activities for new customers shortly after payroll implementation, • Respond to internal support requests from Client Services, Implementation, and Payroll Operations teams, • Collaborate with team members to align priorities and ensure accurate, timely tax reconciliation and compliance, • Perform other duties as assigned Education and Experience • 2+ years of Payroll Tax experience required, • Bachelor’s degree required, • Exposure to payroll, banking, or tax software within a payroll service bureau environment preferred. Paylocity is an equal-opportunity employer. Paylocity is committed to the full inclusion of all individuals. We recruit, train, compensate, and promote regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. At Paylocity, we believe diversity makes us better. We embrace and encourage our employees’ differences in age, culture, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion or spiritual belief, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We actively cultivate these differences through our employee resource groups (ERGs), employee experiences, perspectives, talents, and approaches to drive innovation in the software and services we provide our customers. We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. To request reasonable accommodation in the job application or interview process, please contact . This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed. The base pay range for this position is $35k - 79k /yr; however, base pay offered may vary depending on job-related knowledge, skills, and experience. This position offers a full range of benefits outlined here. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Applicants should apply via . Requirements: