Trabajos production supervisor en Syracuse, New YorkCrear alertas

The Lead Cook is responsible for cooking and preparing food using standard recipes and production guidelines while following food safety, food handling, and sanitation procedures. The individual in this role should safely handle knives and equipment including grills, fryers, ovens, broilers, etc. The Lead Cook may supervise employees and delegate responsibilities. The responsibilities of the position may vary by location based on client requirements and business needs. COMPENSATION: The Hourly rate for this position is $21.00 to $27.00. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark's good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here _ There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all applicable laws, including, but not limited to all applicable Fair Chance Ordinances and Acts. For jobs in San Francisco, this includes the San Francisco Fair Chance Ordinance. • Schedules and assigns daily work activities to staff and supervises the completion of tasks., • Trains and guides staff on job duties, standard food safety and sanitation procedures, cooking methods, etc., • Cooks and prepares food following production guidelines and standardized recipes, • Sets up workstation with all needed ingredients and equipment, • Prepares ingredients by measuring, weighing, mixing, chopping, trimming, and peeling food items, • Safely uses all food utensils including knives, • Operates equipment such as ovens, stoves, slicers, mixers, etc., • Bakes, roasts, broils, steams, and uses a variety of cooking methods on meats, vegetables, and other foods, • Arranges, garnishes, and portions food following established guidelines, • Properly stores food by following food safety policies and procedures, • Cleans and sanitizes work areas, equipment, and utensils, • Maintains excellent customer service with a positive attitude towards guests, customers, clients, co-workers, etc., • Follows Aramark safety policies and procedures including food safety and sanitation, • Ensures security of company assets, • Produces and maintains work schedules and may prepare production records. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. • Previous supervisor experience in a related role preferred, • Experience as a cook or related role required, • Ability to work independently with limited supervision required, • Proven knowledge of the basic principles of food preparation, various cooking methods, and food safety regulations such as proper food handling, sanitation, and storage, • Food safety certification required, • Demonstrates basic math and counting skills, • Demonstrates effective interpersonal and communication skills, both written and verbal This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on , and .

Job Description Monroe Tractor is a well-known and respected construction equipment and agricultural equipment dealer with over 75 years of experience servicing the northeastern US. With 18 locations throughout New York, Pennsylvania, Vermont, Connecticut, and Massachusetts, we pride ourselves on providing best-in-class sales and support to over 15,000 hardworking customers. Since our founding in 1951, the industries we serve have been transformed by the technologies, equipment, and capabilities undreamed of decades ago. But the people we serve haven't changed, and neither have we. We're still a family-owned business! We're looking for a skilled Diesel Technician with a strong background in heavy equipment. In this role, you'll provide professional, safe, and efficient support for our branch, handling everything from routine maintenance to complex diesel engine repairs. This position is part of the union Local 158-C. Qualifications • Prior experience in heavy construction equipment or agriculture equipment is preferred, • Strong independent work ethic but also able to work collaboratively with a team, • Excellent customer service skills; a builder of relationships, • Clear and concise communications, • A strong sense of urgency, focusing on time, • Computer skills, • Valid Drivers License and clean driving record is required, • Ability to independently lift between 50-75 pounds Responsibilities • Provide technical service to equipment, • Read job orders, • Observe and listen to equipment in operation to resolve malfunction issues and execute work procedures effectively, • Follow checklists to ensure all critical parts are examined, • Examine protective guards, loose bolts, and specified safety devices on trucks, and adjust as needed, • Test-drive vehicles to ensure that they run smoothly, • Tag all warranty parts and return them to the warranty clerk, • Attend training classes and keep tabs on factory technical bulletins, • Develop and maintain positive relationships with customers to increase overall customer happiness, • Properly complete the service and/or repairs assigned by the supervisor, • Complete all work according to the applicable safety requirements and published procedures, • Participate in, and utilize to the best of one's abilities, technical training as assigned by management, • Maintain your designated workspace in an organized and clean manner, • Ensure guest vehicles are returned as clean as they were before being serviced, • Show the utmost courtesy to all guests, visitors, and dealership personnel, • Make every effort to achieve the production objectives set by management, • Adhere to the manufacturer's policies and procedures as they relate to labor operations, time, and repair order documentation when performing warranty repairs and torque specifications, • Any other duties as outlined by the Service Supervisor and, or management Technician Benefits • Annual Tool/Shoe Allowance., • Uniforms provided., • Discounts on products and services., • Continued education, manufacturer hands-on and web-based training. Union Health & Welfare, and Pension package included: • Self-insured Medical, • Prescription Drug Coverage, • Dental & Vision, • Life AD&D & short term disability We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This is our target base range for this position. However, we are always looking for top talent. We scale pay based on the specific skills and background you bring. If your proven track record commands a higher package, we still want to hear from you. Pay Transparency $53.82—$53.82 USD

Job Description Position: Operations Supervisor- Night Shift Primary Location: Syracuse, New York Work Schedule: 4 on, 4 off (NIGHT SHIFT) Reports to: Operations Manager Compensation: $90,000 - $100,000 + bonus, + benefits Chemtrade is committed to delivering innovative solutions that address the complex challenges faced by our customers. As a responsible corporate citizen, we prioritize safety, sustainability, and environmental stewardship in all aspects of our operations. Our talented and diverse workforce is at the heart of our success, as we recognize that their knowledge, skills, and dedication drive our ability to deliver exceptional products and services. At Chemtrade, we believe in creating an environment where everyone feels valued, respected, and empowered to contribute their unique perspectives and talents. By putting people at the center of our operations, we build strong connections, nurture innovation, and create a fulfilling work experience for all. About This Role and You¨NBSP; The Night Shift Operations Supervisor at our Syracuse Nitrite production plant directs evening operations personnel. Troubleshoots and resolves equipment and operating problems. Reviews operating data daily. Monitors raw material utilization and production yields to ensure most efficient utilization of materials and optimization of quality products. Monitors and ensure environmental compliance for all areas of operation, air, water, and solids. Supports and participates in Responsible Care programs to maintain safe working conditions for employees and the environment. Prepares, updates and reviews operation procedures to ensure safe and efficient operation of the facility. Coordinates operations and maintenance activities to meet department goals involving budgets, production schedules and raw materials consumption **Qualifications ** Minimum 3+ years’ experience in a related management position preferred. Plant operations/maintenance background in the chemical industry or extensive knowledge and experience in chemical plant operations. Strong communication, interpersonal and organizational skills. Effective written and oral communication skills. Ability to act independently and on own initiative. Excellent problem-solving skills. Committed to continuous improvement of safety, environment, customer service, operations and quality performance. **Responsibilities ** Monitor and direct production. To know, understand, and ensure the unit is operated within its limits and according to the regulatory permits. Provide technical training and assistance to operation personnel. Provide plant personnel process knowledge. Track production and unit consumption rates. Control operation cost. Review operating data daily and report and Investigate deviations from set operating parameters and initiate corrective actions. Identify and initiate process/production improvements and modifications. Assist Operations Manager in improving effectiveness and efficiency of plant Operations. Provide vacation relief for Operations Manager. Trouble-shoot and resolve equipment and operating problems in the unit. Monitor environmental emissions and wastewater discharge. Train and ensure operations personnel are trained to perform their duties safely. Support and participate in all training initiatives as required. Ensure all operations personnel know and receive their regulatory, safety, and environmental training. Update and develop operation procedures, process modifications and equipment changes to improve plant operations. Assist in PHA reviews, Regulatory, Environmental, Safety, and ISO audits, and ensure that action items resulting from these audits and safety incidents are completed. Attend and conduct safety meetings and area inspections of the plant. To ensure that action items resulting from these meetings are completed. Assist Maintenance and Engineers with C.A.R. work and design and evaluate unit operations for process improvements. Perform other duties as assigned Oversee the receiving and unloading of products and raw materials. Ensure all regulated materials and wastes are shipped out of plant within permitted time. What Chemtrade Offers You Embracing Diversity, Maximizing Results At Chemtrade we are committed to cultivating a work environment that embraces and values the unique qualities of every employee. We believe in harnessing the richness of diverse talents, ideas, backgrounds, experiences, and perspectives to drive our business forward. Our vision is to create a workplace where all individuals feel respected, empowered, and inspired to contribute their experiences, ideas, and perspectives. In our culture, we celebrate multiple approaches and viewpoints. To foster an inclusive environment, we actively encourage the creation of Employee Resource Groups. These groups provide platforms for employees to share their unique perspectives, contribute their ideas, and help shape our inclusive culture. Together, we strive to build a workplace that recognizes and celebrates the diverse voices within our organization. We recognize that the diversity of our employees is paramount to our organization's success. It is through the diversity of perspectives that we develop and shape programs and tools that support our employees' growth and career management. Join us in our journey towards building an inclusive workplace that values diversity and promotes the personal and professional development of our employees. We recognize the immense value of Employee Resource Groups (ERG’s) in fostering an including and supportive work environment. Our ERG’s serve as vital platforms for employees to connect, share experiences, and celebrate their unique backgrounds and perspectives. We firmly believe that diversity drives innovation and fuels our success as an organization. By encouraging the formation of ERG’s, we aim to create a workplace where all individual feel empowered to bring their whole selves to work and contribute their diverse talents and ideas. Additionally, we understand the importance of work-life balance and the well-being of our employees and their families. That is why we proudly offer a range of family-friendly benefits and opportunities for career growth and advancement. We are committed to supporting our employees at every stage of their lives and ensuring they can thrive both professionally and personally. Join us and be a part of a company that values diversity, inclusion and the well-being of it’s employees. Learn more about Chemtrade by following us on LinkedIn or Facebook and YouTube: Chemtrade

Job DescriptionDescription: JOB SUMMARY Under the Supervision of the Warehouse Manager, and as a member of the operations team, you will perform material receiving; order processing; use of company ERP System; product packaging for shipment to ensure error-free packaging; efficient loading and unloading of trucks. Verify and keep records on incoming and outgoing inventory. With training may operate industrial cutting equipment. This position is classified as a Safety Sensitive Position due to the work environment and equipment trained and used by staff. Regular Shift 10pm-6:30am Monday through Friday. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Unload incoming trucks and move products to proper staging areas using a forklift, pallet jack or crane., • Receive incoming materials and compare information on packing slip with purchase orders, invoices, or other documents to verify accuracy of shipment., • Prepare orders for shipment by retrieving inventory and packaging appropriately for damage free delivery. Use of company ERP System as required., • Maintain a neat and clean work area by sweeping floors, disposing of cardboard, banding, or packing materials, and removing debris., • Perform related duties as requested to meet department and or business objectives., • After training, use equipment to accurately measure materials, color code, catalog, log inventory, and put product away., • With training may operate industrial cutting equipment to cut materials as requested and perform miscellaneous duties as assigned., • After training, and as necessary, move delivery trucks within the yard and/or operate a NonCDL F450 truck for delivery, to meet production needs., • After training, implement facility closure tasks at end of identified shift., • Regular and reliable on-site attendance is a requirement of employment. Requirements: QUALIFICATION STANDARDS • High School Diploma or High School Equivalent strongly preferred., • Mathematical ability to sort, check, count, measure, and verify numbers and or product shipped or received., • Demonstrated computer skills in the use of company ERP System as required., • Ability to operate material handling equipment after training., • Ability to read and write., • Good communication skills., • Ability to prepare routine administrative paperwork, perform math calculations and perform computer data entry., • Valid NY State Class B driver’s license and/or CDL endorsement a plus, for back-up driving a plus. SUPERVISORY RESPONSIBILITIES • This position does not have any supervisory responsibilities. ACCOUNTABILITIES • Contribute to the overall success of the company by performing all assigned duties in a professional, timely and accurate manner., • Follow all Company safety policies and procedures set forth in the Employee Handbook, Safety Policies, and any local/regional/state/national regulations. EQUIPMENT, MACHINES AND SOFTWARE USED: • Ability to operate industrial fork trucks/lifts, overhead crane, back saw, and computer to send/receive email messages, post information to a database, and perform basic email and/or data entry in ERP System., • Accurately read calipers and measuring instruments determine inventory amounts and customer requirements. With training ability to cutting machinery (saw and/or lathe)., • Must wear appropriate personal protective equipment including safety shoes, gloves, and safety glasses when performing certain job duties., • Eligible staff with NYS CDL or Class B license and training may drive company commercial vehicles. MENTAL AND VISUAL REQUIREMENTS • Moderate mental and visual attention required for performing manual work, machine operations, setups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation., • May be required to operate equipment in congested areas involving considerable variety of movement. PHYSICAL ACTIVITIES AND REQUIREMENTS • Ability with or without reasonable accommodation performs the physical requirements of the job which include but are not limited to walk, climb, stoop, kneel, crouch, bend, talk, hear, and perform repetitive motion of hands and/or wrists to finger, grasp, handle, feel, push, pull, reach., • Visual acuity to perform inspection of materials, reading of caliper and other measuring devices and operating motorized material handling equipment., • Ability to exert more than 20 pounds of force constantly, and/or more than 50 pounds of force frequently, and/or 100 pounds of force occasionally to move objects. ENVIRONMENTAL CONDITIONS • Work involves minimal exposure to unusual elements, such as temperature changes, outdoor exposure to weather conditions, fumes, odors, gases, mists, and/or smoke, oils and/or lubricating fluids. (SDS sheets on file and available for review)., • Work environment involves exposure to physical risks, such as operating dangerous equipment and proximity to moving mechanical parts. COMPENSATION • The hourly range is government set minimum wage up to $25.00/hour, plus discretionary incentive. EMPLOYER'S DISCLAIMER • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job DescriptionDescription: JOB SUMMARY Under the Supervision of the Warehouse Manager, and as a member of the operations team, you will perform material receiving; order processing; use of company ERP System; product packaging for shipment to ensure error-free packaging; efficient loading and unloading of trucks. Verify and keep records on incoming and outgoing inventory. With training may operate industrial cutting equipment. This position is classified as a Safety Sensitive Position due to the work environment and equipment trained and used by staff. Regular Shift 2pm-10:30pm Monday through Friday. Retention Incentives: $1000 Dollars after 90 days of continuous employment $1000 Dollars after 180 days of continuous employment $1500 Dollars after 1 year of continuous employment Must remain an employee of Murphy and Nolan Inc. during the entire time periods to receive incentive. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Unload incoming trucks and move products to proper staging areas using a forklift, pallet jack or crane., • Receive incoming materials and compare information on packing slip with purchase orders, invoices, or other documents to verify accuracy of shipment., • Prepare orders for shipment by retrieving inventory and packaging appropriately for damage free delivery. Use of company ERP System as required., • Maintain a neat and clean work area by sweeping floors, disposing of cardboard, banding, or packing materials, and removing debris., • Perform related duties as requested to meet department and or business objectives., • After training, use equipment to accurately measure materials, color code, catalog, log inventory, and put product away., • With training may operate industrial cutting equipment to cut materials as requested and perform miscellaneous duties as assigned., • After training, and as necessary, move delivery trucks within the yard and/or operate a NonCDL F450 truck for delivery, to meet production needs., • After training, implement facility closure tasks at end of identified shift., • Regular and reliable on-site attendance is a requirement of employment. Requirements: QUALIFICATION STANDARDS • High School Diploma or High School Equivalent strongly preferred., • Mathematical ability to sort, check, count, measure, and verify numbers and or product shipped or received., • Demonstrated computer skills in the use of company ERP System as required., • Ability to operate material handling equipment after training., • Ability to read and write., • Good communication skills., • Ability to prepare routine administrative paperwork, perform math calculations and perform computer data entry., • Valid NY State Class B driver’s license and/or CDL endorsement a plus, for back-up driving a plus. SUPERVISORY RESPONSIBILITIES • This position does not have any supervisory responsibilities. ACCOUNTABILITIES • Contribute to the overall success of the company by performing all assigned duties in a professional, timely and accurate manner., • Follow all Company safety policies and procedures set forth in the Employee Handbook, Safety Policies, and any local/regional/state/national regulations. EQUIPMENT, MACHINES AND SOFTWARE USED: • Ability to operate industrial fork trucks/lifts, overhead crane, back saw, and computer to send/receive email messages, post information to a database, and perform basic email and/or data entry in ERP System., • Accurately read calipers and measuring instruments determine inventory amounts and customer requirements. With training ability to cutting machinery (saw and/or lathe)., • Must wear appropriate personal protective equipment including safety shoes, gloves, and safety glasses when performing certain job duties., • Eligible staff with NYS CDL or Class B license and training may drive company commercial vehicles. MENTAL AND VISUAL REQUIREMENTS • Moderate mental and visual attention required for performing manual work, machine operations, setups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation., • May be required to operate equipment in congested areas involving considerable variety of movement. PHYSICAL ACTIVITIES AND REQUIREMENTS • Ability with or without reasonable accommodation performs the physical requirements of the job which include but are not limited to walk, climb, stoop, kneel, crouch, bend, talk, hear, and perform repetitive motion of hands and/or wrists to finger, grasp, handle, feel, push, pull, reach., • Visual acuity to perform inspection of materials, reading of caliper and other measuring devices and operating motorized material handling equipment., • Ability to exert more than 20 pounds of force constantly, and/or more than 50 pounds of force frequently, and/or 100 pounds of force occasionally to move objects. ENVIRONMENTAL CONDITIONS • Work involves minimal exposure to unusual elements, such as temperature changes, outdoor exposure to weather conditions, fumes, odors, gases, mists, and/or smoke, oils and/or lubricating fluids. (SDS sheets on file and available for review)., • Work environment involves exposure to physical risks, such as operating dangerous equipment and proximity to moving mechanical parts. COMPENSATION • The hourly range is government set minimum wage up to $25.00/hour, plus discretionary incentive. EMPLOYER'S DISCLAIMER • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job Description • We are hiring immediately for full time COOK positions., • Location: The Willows Inpatient by Eurest - 847 James Street, Syracuse, NY 13203 Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. More details upon interview., • Requirement: At least 2 years of scratch cooking experience required. *Internal Employee Referral Bonus Available • Fixed Pay Rate: $20.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1566208. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates at Eurest are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyEurest.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1566208 [[req_classification]]

Job Description • We are hiring immediately for full time COOK SUPERVISOR position., • Location: The Willows Inpatient - 847 James Street, Syracuse, NY 13203 Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. More details upon interview., • Requirement: At least 5 years of kitchen experience required. *Internal Employee Referral Bonus Available • Fixed Pay Rate: $22.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1589752. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Directly supervises food-service associates in accordance with policies, procedures and applicable laws. Essential Duties and Responsibilities: • Trains employees; plans, assigns and directs work; appraises performance; rewards and disciplines associates; addresses complaints and resolves problems., • Advises management of purchasing requirements with a focus on minimizing waste and avoiding product shortages., • Uses approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Operates and cleans equipment in accordance with department procedures after each use., • Stores, labels and dates food items according to policy; maintains established food rotations in storage in order to minimize spoilage and waste., • Follows HACCP guidelines to ensure quality and safety of food supply., • Operates food-service equipment in a safe manner and according to established policies and procedures., • Helps serves meals; remains present during scheduled meal periods to receive customer comments and feedback., • Performs other duties as assigned. Associates at Eurest are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyEurest.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Req ID: 1589752 [[req_classification]]

Superior Metals Manufacturing is currently looking for an Operations Manager to join our team! If you’re looking to join a company positioned for strong growth - with real opportunities to advance - Superior Metal Manufacturing may be the place for you. We’re proud to offer a competitive compensation package, outstanding benefits, and the chance to work in a state-of-the-art facility alongside a skilled and collaborative team. Location: Chittenango, NY Employment Type: Full-Time Salary: $130,000-$170,000 but will be evaluated depending on candidates’ knowledge, skills, and abilities. Job Summary: The primary function of this position is to manage operations in order to meet daily safety, quality, productivity, cost and team building requirements. Essential Job Functions/Duties: • Determine appropriate staffing levels for manufacturing areas, • Accountable for development of site supervisors and manufacturing managers., • Responsible for fostering a well-trained workforce with an emphasis on continuous improvement., • Perform performance management review for operations supervisors and manufacturing managers including the establishment of goals and objective that correspond to site objectives., • Responsible to build and improve a process that creates a quality product., • Responsible to ensure standardized work is in place for all processes and adherence to quality process., • Responsible for prevention of defects and scraps., • Build own technical knowledge in support of key process parameters., • Lead, support and plan improvement using Systematic Problem Solving., • Establish training plan and targets for critical jobs., • Provide and oversee training including training and cross training plans., • Apply and coach continuous improvement., • Responsible for site production goals, metrics, and driving quarter over quarter improvement., • Responsible to implement continuous improvement efforts., • Collaborate with maintenance department to implement preventive maintenance on critical equipment., • Responsible for resource planning in preparation for new products, • Create an environment which supports idea generation through Continuous Improvement, • Propose equipment needs for capital project implementations and may also participate in project implementation., • Ensure problems are correctly identified and cost effective solutions are implemented., • Initiate improvements to save material and energy costs., • Drive quarter over quarter variable cost improvements, • Ensure compliance with HR Policies and practices, • Establish and direct site policies and practices., • Responsible for discipline issues including attendance, employee relations, and violations of company policies., • Responsible for ensuring operations supervisor adherence to the completion of Accident Investigation forms., • Attend all accident investigations and be responsible to implementation of safety countermeasures and doing root cause analysis to determine appropriate safety changes that are needed to improve plant safety, • Responsible for oversight of safety training program., • Responsible to adhere to all site safety policies and procedures, • Coach and model safe behaviors, respect for environment and 6S behaviors., • Champion safety practices at the site., • Ability to work at the Chittenango facility, • Ability to work hours in addition to the regular work week, including evenings and weekends as needed., • Various other duties as assigned by Supervision Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Education: Bachelor’s degree; or four to ten years’ related experience and/or training; or equivalent combination of education and experience. Six sigma experience desirable. Experience: Manufacturing experience in a foundry or vacuum melting environment preferred. Other Required Knowledge, Skills, & Abilities: • Language Skills – Ability to read, understand and comprehend document such as safety rules, operating and maintenance instructions, procedure manuals, Oracle reports and Internal Methods Sheets (IMS). Ability to carry out instruction in written, oral or diagram form. Excellent team skills and able to interact with other employees, engineers and leadership. Ability to review plant performance with Executive Management. Review progress with Continuous Improvement and Engineers to solve issues., • Mathematical Skills – ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Reasoning Ability – Ability to deal with problems involving multiple variables in standardized situations., • Computer Skills – Knowledgeable of Microsoft Office and Manufacturing software. Knowledge of computers. Why Join Us? Innovative Environment: Work in a state-of-the-art melt shop. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, bonuses and more. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: _ Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. #Aerospace #Metallurgy #Manufacturing #Engineering EOE/M/F/DISABLED/VETERANS This is a management position This is a full time position Pay Range: $130,000-$170,000

Job DescriptionDescription: Operate fabricating machinery and fabricate a variety of flat and irregular shaped parts for various product lines. MONDAY-FRIDAY 6am-2:30pm or MONDAY-THURSDAY 1pm-11:30pm Shifts Available ABOUT JAQUITH INDUSTRIES: Jaquith Industries is a family-owned manufacturing company committed to delivering high-quality products, exceptional customer service, and a safe, team-oriented work environment. We take pride in our craftsmanship, reliability, and the long-term relationships we build with our employees and customers. At Jaquith Industries, we believe our people are our greatest asset, and we are dedicated to providing opportunities for growth, stability, and success. We are looking for motivated individuals who value teamwork, dependability, and continuous improvement. If you're seeking a rewarding career with a company that values its employees and invests in their future, we'd love to hear from you. BENEFITS: Jaquith Industries offers a competitive benefits package, including: · Health Insurance - 75% Employer Covered · Life Insurance · 401(k) Retirement Plan · 401(k) Automatic 3% Match · 80 Hours of Paid Time Off (PTO) · 40 Hours of Paid Sick Time · 11 Paid Holidays per Year · Up to $700 Annual Reimbursement for Eligible Dental and Vision Expenses · Stable, Long-Term Employment Opportunities · Overtime is Available, but Not Required · Supportive Team Environment Join a company where your hard work is valued and your contributions make a difference every day Department - 109 Closing, 109 CNC Saws ESSENTIAL JOB FUNCTIONS: • Operate various size and types of sheet metal fabricating machinery such as shears, press brakes, punch presses, etc., • Fabricate a variety of flat and irregular shaped parts for various product lines., • Remove burrs, sharp corners, etc. from processed parts., • Using hand truck, Lift truck, or overhead crane to move materials, parts, tools, etc. to and from storage, staging areas, or workstation., • Obtain first piece inspection., • Read and interpret measuring devices., • Perform daily lift truck inspections., • Follow quality control standards to ensure meeting quality and quantity requirements., • Make minor adjustments to machine settings and perform general equipment inspection., • Adhere to established safety rules and policies., • Notify Supervisor or Safety Director of any unsafe acts or practice stopped., • Meet quality and production standards., • Keep work area neat and orderly on a daily basis., • Keep Supervisor fully informed of any problems., • Perform other duties as assigned.Requirements:, • High school diploma or general education degree (GED) and 3 years work experience., • Possess and demonstrate positive mentoring and leadership qualities., • Good oral and written communication skills., • Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training), • Treat all co-workers with dignity and respect., • Basic math skills., • Basic organizational skills., • Positive attitude towards work and work environment. EQUIPMENT LISTING (MACHINES, TOOLS & SOFTWARE): Will work with sheet metal, plastic and aluminum, stainless steel, copper, orders, parts and drawings, using a variety of tools, including shears, press brakes, punch presses, hand truck, Lift Truck, overhead crane, disc sanders, belt sanders, hand tools, micrometers and gages, and a variety of power tools and hand tools.

Job DescriptionDescription: Job Summary: Feldmeier Equipment is seeking highly motivated individuals with a strong work ethic and machine operation experience to join our 1st shift production team! Work in a state-of-the-art facility that provides a rewarding full-time career, in an enjoyable, fast-paced environment. Feldmeier offers the opportunity to learn a skill and fabricate stainless steel parts & vessels for customers around the world. Requirements: Essential Functions of Position: • Set up machines (calibration, cleaning etc.) to start a production cycle., • Control and adjust machine settings such as speed, pressure, direction., • Troubleshoot issues that might occur with the machine during the shift., • Check finished parts to spot any machine-related mistakes or flaws., • Observe and follow company safety rules and regulations. Minimum Qualifications: • Detail orientated., • Strong ability to multitask., • Good work ethic, • Ability to work independently and be self-motivated., • Reliable Transportation Preferred Qualifications: • Machine Operation Experience in a Manufacturing setting., • Basic knowledge of hand tools., • Basic knowledge of metal cutting/welding., • Experience with CNC controls., • Ability to add, subtract, multiply, and divide using fractions, decimals etc., • Metal Forming/Polishing experience is a plus., • Ability to read and understand Blueprints is a plus. Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day and occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lying down inside or under vessel and twisting while performing required job tasks. Being mindful of chemical safety and use proper PPE when required. Job Title: Machine Operator Reports To: Shop Supervisor Classification: non-exempt Pay Range: $22.00- $31.50 Night Shift: 3:30pm-2am Shift Differential: $2

Job DescriptionDescription: Operate fabricating machinery and fabricate a variety of flat and irregular shaped parts for various product lines. MONDAY-THURSDAY 1pm-11:30pm Shifts Available ABOUT JAQUITH INDUSTRIES: Jaquith Industries is a family-owned manufacturing company committed to delivering high-quality products, exceptional customer service, and a safe, team-oriented work environment. We take pride in our craftsmanship, reliability, and the long-term relationships we build with our employees and customers. At Jaquith Industries, we believe our people are our greatest asset, and we are dedicated to providing opportunities for growth, stability, and success. We are looking for motivated individuals who value teamwork, dependability, and continuous improvement. If you're seeking a rewarding career with a company that values its employees and invests in their future, we'd love to hear from you. BENEFITS: Jaquith Industries offers a competitive benefits package, including: · Health Insurance - 75% Employer Covered · Life Insurance · 401(k) Retirement Plan · 401(k) Automatic 3% Match · 80 Hours of Paid Time Off (PTO) · 40 Hours of Paid Sick Time · 11 Paid Holidays per Year · Up to $700 Annual Reimbursement for Eligible Dental and Vision Expenses · Stable, Long-Term Employment Opportunities · Overtime is Available, but Not Required · Supportive Team Environment Join a company where your hard work is valued and your contributions make a difference every day Department - 109 Closing, 109 CNC Saws ESSENTIAL JOB FUNCTIONS: • Operate various size and types of sheet metal fabricating machinery such as shears, press brakes, punch presses, etc., • Fabricate a variety of flat and irregular shaped parts for various product lines., • Remove burrs, sharp corners, etc. from processed parts., • Using hand truck, Lift truck, or overhead crane to move materials, parts, tools, etc. to and from storage, staging areas, or workstation., • Obtain first piece inspection., • Read and interpret measuring devices., • Perform daily lift truck inspections., • Follow quality control standards to ensure meeting quality and quantity requirements., • Make minor adjustments to machine settings and perform general equipment inspection., • Adhere to established safety rules and policies., • Notify Supervisor or Safety Director of any unsafe acts or practice stopped., • Meet quality and production standards., • Keep work area neat and orderly on a daily basis., • Keep Supervisor fully informed of any problems., • Perform other duties as assigned.Requirements:, • High school diploma or general education degree (GED) and 3 years work experience., • Possess and demonstrate positive mentoring and leadership qualities., • Good oral and written communication skills., • Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training), • Treat all co-workers with dignity and respect., • Basic math skills., • Basic organizational skills., • Positive attitude towards work and work environment. EQUIPMENT LISTING (MACHINES, TOOLS & SOFTWARE): Will work with sheet metal, plastic and aluminum, stainless steel, copper, orders, parts and drawings, using a variety of tools, including shears, press brakes, punch presses, hand truck, Lift Truck, overhead crane, disc sanders, belt sanders, hand tools, micrometers and gages, and a variety of power tools and hand tools.

Job DescriptionDescription: Job Summary: Feldmeier Equipment is seeking highly motivated individuals with a strong work ethic and machine operation experience to join our 1st shift production team! Work in a state-of-the-art facility that provides a rewarding full-time career, in an enjoyable, fast-paced environment. The ideal candida Feldmeier offers the opportunity to learn a skill and fabricate stainless steel parts & vessels for customers around the world. Requirements: Essential Functions of Position: • Set up machines (calibration, cleaning etc.) to start a production cycle., • Control and adjust machine settings such as speed, pressure, direction., • Troubleshoot issues that might occur with the machine during the shift., • Check finished parts to spot any machine-related mistakes or flaws., • Observe and follow company safety rules and regulations. Minimum Qualifications: • Detail orientated., • Strong ability to multitask., • Good work ethic, • Ability to work independently and be self-motivated., • Reliable Transportation Preferred Qualifications: • Machine Operation Experience in a Manufacturing setting., • Basic knowledge of hand tools., • Basic knowledge of metal cutting/welding., • Experience with CNC controls., • Ability to add, subtract, multiply, and divide using fractions, decimals etc., • Metal Forming/Polishing experience is a plus., • Ability to read and understand Blueprints is a plus. -Forklift certified -Manufacturing Experience Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day and occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lying down inside or under vessel and twisting while performing required job tasks. · Being mindful of chemical safety and use proper PPE when required. Job Title: Machine Operator Reports To: Shop Supervisor Classification: non-exempt Pay Range: $19.00- $31.50

Job Description We are looking for dependable Machine Operators to join a growing manufacturing team. This is a great opportunity for someone with production or manufacturing experience, but extensive machine operating experience is not required. Training will be provided Pay: $20.00 per hour Available Shifts: • 1st Shift: 6:00 AM – 2:00 PM, • 2nd Shift: 2:15 PM – 10:15 PMResponsibilities, • Safely operate assigned production machinery and equipment, • Follow all safety and quality procedures, • Load raw materials or parts into machines, • Monitor machines during production, • Make basic machine adjustments as needed, • Inspect finished products for quality, • Identify obvious defects or production issues, • Properly label finished products, • Maintain basic production and quality records, • Keep machines and surrounding work areas clean and organized, • Return tools and equipment to designated locations, • Communicate machine, safety, or quality concerns to a supervisor, • Work closely with other team members to meet production goals, • Follow production schedules and adapt to changes when necessary, • Perform other production-related duties as assigned, • Work overtime when requiredQualifications, • Previous manufacturing, warehouse, or machine operating experience is helpful but not required, • Willingness to learn how to operate production equipment, • Ability to follow written and verbal instructions, • Basic mechanical aptitude, • Strong attention to safety and quality, • Dependable attendance and punctuality, • Ability to work effectively as part of a team, • Ability to work in a fast-paced manufacturing environmentPhysical Requirements, • Ability to stand and move throughout the shift, • Ability to bend, reach, push, and pull as required, • Ability to regularly lift up to 50 pounds, • Ability to safely work around manufacturing equipment

Job Description At St. Camillus, we're Centered on Celebrating our Employees! Our team is what makes St. Camillus an amazing place to work. We are currently in need of a Full Time Executive Chef for our Food Services Department! JOB DESCRIPTION: This position is responsible for all aspects of managing the kitchen’s production and culinary staff of the dining service department. This role is directly responsible for ensuring the quality and preparation of all menu items and proper handling/storage of food items according to the Department of Health and facility regulations. • Coordinates the purchasing of all food items., • Develop menus, while maintaining approved food costs., • Maintain complete knowledge of and ensure associate compliance with Department of Health and St. Camillus regulations, policies and procedures., • Establish daily priorities, and assign production and preparation tasks for the culinary team., • Review daily menus with management, and accept feedback., • Review and execute all event orders., • Take physical inventory of food items daily and weekly., • Ensure the kitchen area is stocked with required tools, and working equipment for daily demands., • Ensure that recipe cards, production scheduled, plating guides, textures, and photographs are current and posted., • Ensure that staff prepare menu items following recipes and guidelines according to department and restriction standards., • Conduct frequent walk throughs of the kitchen area and direct staff to correct any deficiencies. Ensure that quality and details are being maintained., • Ensure that excess items are used effectively., • Oversee and direct training of new hires, and maintain on-going training for existing staff., • Perform any other job related duties or responsibilities as assigned by your supervisor. QUALIFICATIONS: • Proven experience in restaurant management, food handling, and/or catering, • Strong culinary skills with expertise in food production and menu planning, • Excellent communication skills and can effectively lead a tea, • Ability to work under pressure in a fast-paced environment while maintaining quality standards EMPLOYEE BENEFITS: • No Mandated Shifts, • Daily Pay, • Generous Paid Time Off, • Affordable Health/Dental/Vision Plans, • Company Funded Life Insurance and Health Reimbursement Account, • Retirement Plan, • Tuition Reimbursement, • On the Centro Bus Line, • Free parking Why work at St. Camillus? Our Mission: St. Camillus is a non-denominational, not-for-profit organization dedicated to caring for life through a broad range of health care services. Our Vision: To be the provider of choice for compassionate and innovative care. If you are interested in joining a team of professionals who are committed to providing high quality services in a caring environment, we want to hear from you! To learn more information about St. Camillus, visit our website at: http://www.st-camillus.org EOE/Affirmative Action Employer

Job Description We are looking for a Machinist to join our manufacturing team at Bluefors in Syracuse, NY. In this role, you will manufacture precision parts in low-production runs using manual machine tools. You will play an important role in producing high-quality components for advanced cryogenic systems while working in a hands-on, collaborative manufacturing environment. This is an excellent opportunity for someone with machining experience who takes pride in precision, quality, and craftsmanship. Interested? Keep reading! Your tasks as a Machinist will include setting up and operating manual machines to complete work orders while ensuring precision is maintained throughout each machining operation. You will inspect parts according to established procedures, perform first-piece quality inspections as verified by a supervisor or quality technician, and make or modify tooling when necessary. You will also use and qualify measuring tools, monitor and record tooling, supplies, and raw material usage, and notify appropriate personnel when materials are needed. In addition, you will clean machines, tooling, and finished parts, perform basic machine maintenance, complete ongoing technical training, and assist with training Manufacturing Associates as applicable. We are looking for a Machinist candidate with a high school diploma and at least one year of machining experience, or a one-year certificate from a college or technical school with six months of related experience and/or training, or an equivalent combination of education and experience. You should have the ability to read and interpret safety rules, operating and maintenance instructions, procedure manuals, training documents, and work instructions. The ideal candidate will be able to set up and use measuring tools, read and understand blueprints, and follow written and verbal directions accurately. Familiarity with GD&T is a plus. Strong attention to detail, mechanical aptitude, dependability, and a commitment to quality and safety are essential. We also appreciate candidates who demonstrate strong problem-solving skills and a proactive approach to maintaining precision and quality. Experience modifying tooling, performing first-piece inspections, or training less experienced employees will help you stand out. A willingness to continue developing technical skills and the ability to work effectively both independently and as part of a team are highly valued. Candidates who align with our values of attention to detail, collaboration, continuous learning, dependability, adaptability, and safety will thrive in this role. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your technical and machining skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay Range: 19.23-25.00/hr. (DOE) Main Responsibilities include the following: Set up and operate manual machines to complete work orders Manufacture precision parts in low-production runs Maintain required precision and accuracy throughout all machining operations Inspect parts according to established policies and procedures Perform first-piece quality inspections as verified by a supervisor or quality technician Make and/or modify tooling as necessary Qualify and use measuring tools daily and as needed throughout the shift Monitor and record tooling, supplies, and raw material inventory usage Notify appropriate personnel when tooling, supplies, or raw materials need replenishment Clean machines, tooling, and finished parts Perform basic machine maintenance as required Complete ongoing technical training requirements Assist with training Manufacturing Associates as applicable Maintain good housekeeping and a clean, organized workspace Follow all Bluefors quality and safety standards Perform additional duties as assigned What We Expect from You High school diploma or equivalent required One year of machining experience preferred OR one-year certificate from a college or technical school with six months of related experience and/or training OR equivalent combination of education and experience Ability to set up and use measuring tools Ability to read and understand blueprints and technical drawings Familiarity with GD&T principles is a plus Ability to read and follow written and verbal directions Ability to interpret safety rules, operating and maintenance instructions, procedures, and training documents Strong attention to detail and commitment to precision and quality Strong mechanical aptitude and problem-solving skills Dependability and ability to work independently and in a team environment Commitment to safety and following established procedures Willingness to continue learning and developing technical skills Ability to align with Bluefors Leadership Principles and workplace competencies Excellent command of English, both written and spoken We Also Appreciate Experience modifying or creating tooling Experience performing first-piece and in-process inspections Experience working in a precision manufacturing environment Experience training or mentoring Manufacturing Associates Strong organizational and time management skills A proactive approach to troubleshooting and process improvement Ability to adapt in a fast-paced production environment A collaborative, team-oriented mindset A positive attitude and strong alignment with company values, including safety, diversity, and organizational effectiveness Physical Demands While performing the duties of this job, the employee is frequently required to stand, reach with arms and hands, and use hands and fingers for detailed machining tasks. The employee is occasionally required to walk, stoop, kneel, crouch, or crawl and talk and hear. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment This role operates in a manufacturing environment and regularly works around manual machine tools, moving mechanical parts, and other production equipment. The employee may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, electrical hazards, vibration, and moderately loud noise. Mandatory personal protective equipment (PPE) must be worn as required. Employees are expected to maintain a safe, clean, and organized workspace and follow all Bluefors safety policies and procedures. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job Description Machinist TT Job Posting We are looking for a Machinist to join our manufacturing team at Bluefors in Syracuse, NY. In this role, you will manufacture precision parts in low-production runs using manual machine tools. You will play an important role in producing high-quality components for advanced cryogenic systems while working in a hands-on, collaborative manufacturing environment. This is an excellent opportunity for someone with machining experience who takes pride in precision, quality, and craftsmanship. Interested? Keep reading! Your tasks will include setting up and operating manual machines to complete work orders while ensuring precision is maintained throughout each machining operation. You will inspect parts according to established procedures, perform first-piece quality inspections as verified by a supervisor or quality technician, and make or modify tooling when necessary. You will also use and qualify measuring tools, monitor and record tooling, supplies, and raw material usage, and notify appropriate personnel when materials are needed. In addition, you will clean machines, tooling, and finished parts, perform basic machine maintenance, complete ongoing technical training, and assist with training Manufacturing Associates as applicable. We are looking for a candidate with a high school diploma and at least one year of machining experience, or a one-year certificate from a college or technical school with six months of related experience and/or training, or an equivalent combination of education and experience. You should have the ability to read and interpret safety rules, operating and maintenance instructions, procedure manuals, training documents, and work instructions. The ideal candidate will be able to set up and use measuring tools, read and understand blueprints, and follow written and verbal directions accurately. Familiarity with GD&T is a plus. Strong attention to detail, mechanical aptitude, dependability, and a commitment to quality and safety are essential. We also appreciate candidates who demonstrate strong problem-solving skills and a proactive approach to maintaining precision and quality. Experience modifying tooling, performing first-piece inspections, or training less experienced employees will help you stand out. A willingness to continue developing technical skills and the ability to work effectively both independently and as part of a team are highly valued. Candidates who align with our values of attention to detail, collaboration, continuous learning, dependability, adaptability, and safety will thrive in this role. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your technical and machining skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay Range: $21.25 - $26.25/hr. (DOE) Main Responsibilities include the following: Set up and operate manual machines to complete work orders Manufacture precision parts in low-production runs Maintain required precision and accuracy throughout all machining operations Inspect parts according to established policies and procedures Perform first-piece quality inspections as verified by a supervisor or quality technician Make and/or modify tooling as necessary Qualify and use measuring tools daily and as needed throughout the shift Monitor and record tooling, supplies, and raw material inventory usage Notify appropriate personnel when tooling, supplies, or raw materials need replenishment Clean machines, tooling, and finished parts Perform basic machine maintenance as required Complete ongoing technical training requirements Assist with training Manufacturing Associates as applicable Maintain good housekeeping and a clean, organized workspace Follow all Bluefors quality and safety standards Perform additional duties as assigned What We Expect from You High school diploma or equivalent required One year of machining experience preferred OR one-year certificate from a college or technical school with six months of related experience and/or training OR equivalent combination of education and experience Ability to set up and use measuring tools Ability to read and understand blueprints and technical drawings Familiarity with GD&T principles is a plus Ability to read and follow written and verbal directions Ability to interpret safety rules, operating and maintenance instructions, procedures, and training documents Strong attention to detail and commitment to precision and quality Strong mechanical aptitude and problem-solving skills Dependability and ability to work independently and in a team environment Commitment to safety and following established procedures Willingness to continue learning and developing technical skills Ability to align with Bluefors Leadership Principles and workplace competencies Excellent command of English, both written and spoken We Also Appreciate Experience modifying or creating tooling Experience performing first-piece and in-process inspections Experience working in a precision manufacturing environment Experience training or mentoring Manufacturing Associates Strong organizational and time management skills A proactive approach to troubleshooting and process improvement Ability to adapt in a fast-paced production environment A collaborative, team-oriented mindset A positive attitude and strong alignment with company values, including safety, diversity, and organizational effectiveness Physical Demands While performing the duties of this job, the employee is frequently required to stand, reach with arms and hands, and use hands and fingers for detailed machining tasks. The employee is occasionally required to walk, stoop, kneel, crouch, or crawl and talk and hear. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment This role operates in a manufacturing environment and regularly works around manual machine tools, moving mechanical parts, and other production equipment. The employee may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, electrical hazards, vibration, and moderately loud noise. Mandatory personal protective equipment (PPE) must be worn as required. Employees are expected to maintain a safe, clean, and organized workspace and follow all Bluefors safety policies and procedures. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic

Job DescriptionDescription: STATUS: Non-Exempt DEPARTMENT: Production REPORT TO: Production Supervisor JOB SUMMARY: The Crane Operator is responsible for operating various types of cranes to lift, move, position, and transport heavy materials, machinery, or equipment on construction sites, manufacturing plants, shipping yards, or other industrial settings. Your role will involve ensuring the safe and efficient operation of electric, diesel, and gasoline cranes while adhering to all safety protocols and regulations. ESSENTIAL JOB DUTIES: • Required to safely operate different types of cranes including mobile, tower, overhead, or hydraulic cranes according to job requirements., • Lift, position, lower heavy materials/equipment using proper rigging techniques & equipment., • Strictly adhere to safety guidelines, procedures, and regulations to prevent accidents or injuries during crane operations., • Perform routine inspections and maintenance on cranes to ensure optimal functionality. Report any malfunctions or issues promptly., • Maintain clear and effective communication with ground crew, signalers, and other workers to ensure safe and efficient operations., • Assess and prepare the work area before crane operation, ensuring stability and adequate space for maneuvering., • Maintain accurate records of daily activities, including lifts performed, equipment inspections, and maintenance logs., • Troubleshoot operational issues and make adjustments as needed to ensure smooth crane functionality., • Collaborate with other construction or site personnel to coordinate crane movements and tasks effectively., • Respond promptly/effectively in emergency situations, preventing accidents and mitigate risks., • Wears PPE appropriate for the work assignment., • Other duties as required. Requirements: QUALIFICATIONS: • High school diploma or GED is required; additional applicable training or certifications are preferred., • 3+ years of experience operating cranes in a construction environment., • Crane Operator Certification (NCCCO) or equivalent is required., • Knowledge of crane operation procedures, load calculations, and rigging techniques., • Strong understanding of safety standards and practices related to crane operation., • Ability to read and interpret load charts, blueprints, and rigging plans., • Excellent hand-eye coordination and manual dexterity., • Strong communication skills and ability to follow instructions & coordinate with team members., • Valid driver’s license and ability to travel to different job sites as needed., • OSHA certification or additional safety training helpful., • Experience with various crane types (e.g., rough terrain, lattice boom, all-terrain) desired., • Knowledge of crane maintenance and troubleshooting necessary. EQUIPMENT LISTING (MACHINES, TOOLS & SOFTWARE): Advanced computer skills that include purchasing software, as well as the ability to send/receive e-mail and work with other purchasing software. Must be able to read, create and change blueprints and drawings. Must be able to operate Computer, Email, Microsoft Excel, Microsoft Word. May be required to operate Printer, Copier, Fax Machine, Telephone, Scanner, and calculator, micrometers and gages. MENTAL AND VISUAL DEMAND: Moderate mental and visual attention to coordinate materials for manual work, machine operations, setups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. SUPERVISORY RESPONSIBILITIES Directly supervises various employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. PHYSICAL ACTIVITIES AND DEMANDS: Moderate Lifting: Exerting up to 10 pounds of force frequently and/or up to 25 pounds of force occasionally and/or up to 100 pounds on rare occasions, with assistance. ENVIRONMENTAL CONDITIONS: Production Environment – While performing the duties of this job, the employee is exposed to work near moving mechanical parts;extreme heat (non-weather);risk of radiation and vibration. The noise level in the work environment is usually loud. During hot weather, work processes can produce condensation on the floor resulting in slippery conditions. Employees are required to wear steel toed, slip resistant shoes while working in production areas. Safety Equipment - May wear a variety of PPE in production areas including safety glasses with side shields, safety shoes and other PPE in accordance with assigned work tasks. EMPLOYER'S DISCLAIMER: • All requirements are subject to modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job Description About LASMNYThe Legal Aid Society of Mid-New York, Inc. (LASMNY) is a nonprofit public interest law firm dedicated to providing free legal information, advice, and representation to individuals who cannot afford an attorney. Guided by our mission to ensure equal access to justice, we assist low-income individuals facing civil legal issues that affect basic needs such as housing, safety, income, and healthcare. We are committed to protecting the rights of vulnerable populations, including seniors, veterans, people with disabilities, immigrants, and survivors of domestic violence. LASMNY serves residents in thirteen counties across Central and Northern New York: Broome, Cayuga, Chenango, Cortland, Delaware, Herkimer, Jefferson, Lewis, Madison, Oneida, Onondaga, Oswego, and Otsego. Through our Agricultural Worker Project, we also provide legal services to agricultural workers throughout New York State.Job Summary The Economic Security Project provides civil legal services to low-income residents across Central New York facing consumer debt and student loan problems that threaten household stability, including debt collection lawsuits, medical debt, credit card and automobile loan debt, wage garnishments, frozen bank accounts, default judgments, and federal and private student loan matters. The Staff Attorney will provide comprehensive legal services to eligible clients, including advice, negotiation, motion practice, discovery, and litigation. The attorney will appear in consumer credit actions and enforcement proceedings, participate in education and outreach for community members, advocates, and service providers, and offer holistic assistance to clients whose debt problems intersect with housing, benefits, health, and employment. This position is based in LASMNY’s Syracuse office and involves local travel to courts, client meetings, and outreach sites in the communities the office serves. Essential Job Duties • Manage a full caseload of clients facing consumer debt collection and student loan problems, ensuring high-quality legal services., • Represent clients in consumer credit actions, including answering complaints within statutory periods, motion practice, and trial., • Move to vacate default judgments and to vacate or release income executions, wage garnishments, and restrained bank accounts, and assert applicable exemptions from enforcement., • Assert defenses and counterclaims under the Fair Debt Collection Practices Act, New York General Business Law, and related State and federal consumer protection statutes., • Advise and represent clients on medical debt, including hospital financial assistance and charity care eligibility, billing errors, and collection practices., • Advise and represent student loan borrowers on repayment plans, forgiveness and discharge programs, default resolution, administrative advocacy, and private student loan defense, coordinating with the Education Debt Consumer Assistance Program where appropriate., • Negotiate settlements and payment agreements with creditors, debt buyers, collection agencies, and opposing counsel., • Conduct legal research and draft pleadings, motions, memoranda, discovery requests and responses, and correspondence., • Handle discovery, including document review, requests for production, and interrogatories, and prepare clients for hearings, depositions, and trial testimony., • Provide holistic counseling on interconnected legal issues affecting financial stability, including housing, benefits, employment, and health, and connect clients with social services, financial counseling, and community resources., • Assist with intake at courthouses and off-site locations, including during evening hours, to ensure accessibility for clients., • Deliver Know Your Rights presentations and training on debt collection, wage garnishment, exempt income, and student loans for community members, community-based organizations, and consumer advocates., • Participate in coalitions and task forces focused on consumer protection and economic justice., • Maintain accurate, timely, and complete case and time records in the case management system in compliance with LSC regulations, LASMNY policies, and grant reporting requirements., • Collaborate with partner organizations, pro bono attorneys, and other stakeholders, and serve as an ambassador for LASMNY in the community., • Stay current on developments in consumer protection, debt collection, and student loan law and policy., • Participate in staff meetings, trainings, case consultations, and supervisory case reviews., • Exhibit a strong commitment to advancing the mission of LASMNY.Professional Standards, • Demonstrate the highest level of professionalism when handling confidential and sensitive client information., • Communicate effectively and courteously with clients, attorneys, court personnel, agency staff, and community partners., • Maintain regular and predictable attendance in accordance with organizational policies., • Adapt to new technologies and systems, including legal research tools and case management software., • Comply with all Legal Services Corporation regulations, LASMNY policies and procedures, and grant-based reporting requirements., • Perform additional responsibilities and duties as assigned by a supervisor based on agency needs.Required Qualifications, • Juris Doctor (J.D.) or Master of Laws (LL.M.) from an accredited law school., • Eligible for admission to practice law in New York State. Law school graduates registered for the New York State Bar Exam, or eligible for admission on motion, are encouraged to apply., • Excellent written, analytical, organizational, and oral advocacy skills., • Demonstrated commitment to public interest law and serving communities facing systemic barriers to justice., • Ability to work independently, as well as collaboratively, and manage a high volume of cases.Preferred Qualifications, • Admission to practice law in New York State with zero to five years of experience., • Experience in consumer debt defense, student loan counseling, or civil litigation., • Familiarity with debt collection practice in City, Town, and Village Courts., • Valid New York State driver license, or the ability to obtain one., • Proficiency in languages other than English.Compensation and Benefits This position is paid pursuant to the terms of a collective bargaining agreement. For law graduates who are not yet admitted, the salary is $78,000 pending admission. Upon admission, attorneys move to Step 0-1 at $80,000, with salaries increasing to $89,161 at Step 5-6. Placement is by years of relevant experience under the collective bargaining agreement. This position is included in a bargaining unit represented by National Organization of Legal Services Workers (NOLSW), UAW Local 2320. Hours, salary, and benefits are governed by the collective bargaining agreement in effect. LASMNY provides a comprehensive benefits package, including health insurance, retirement contributions, paid leave, and professional development opportunities. LASMNY is a qualifying employer for the federal Public Service Loan Forgiveness program. Application Process Qualified candidates are invited to apply through our online application system. Click on the following link to apply: https://workforcenow.adp.com/. Equal Opportunity Employer LASMNY is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable law. LASMNY provides reasonable accommodations to qualified individuals with disabilities during the application process. Please contact Human Resources to request assistance. Visit our website | lasmny.org

Job Description We’re seeking a highly skilled, detail-oriented and technically driven CNC Programmer II to join our growing Machine Shop team. Do you have strong experience developing CNC programs and supporting complex machining operations? Are you comfortable working with engineering drawings, 3D models, G&M codes, CAD/CAM software and multi-axis CNC equipment? Do you enjoy troubleshooting, optimizing machine processes and providing technical guidance to others? If yes, keep reading! As a CNC Programmer II, you will plan CNC programs and support machining operations for precision metal parts on automatic machine tools while also assisting the Production Supervisor with day-to-day team direction. You will develop, prove out and optimize CNC programs for multi-axis machining centers and traditional manufacturing methods, ensuring parts meet established quality and performance specifications. This role combines hands-on CNC programming and machining expertise with opportunities to provide technical guidance, support employee development and contribute to continuous improvement initiatives. Your tasks as a CNC Programmer II will include analyzing engineering drawings, sketches and 3D models to determine machining requirements, developing and optimizing CNC programs, selecting appropriate tooling and setup requirements, and creating detailed process and setup documentation. You will conduct program prove-outs and trial runs, inspect finished parts, troubleshoot programming issues and optimize processes to improve efficiency and reduce cycle times. You will also maintain the master CNC program directory, assist with the development of jigs, fixtures and special equipment, and coordinate programming activities while providing technical guidance to CNC Programmers and Junior CNC Programmers. In addition, you will support CNC machine operations, training and cross-training, quality initiatives, equipment maintenance and long-range manufacturing projects. Main responsibilities would be Analyze engineering drawings, sketches and 3D models to determine machining dimensions, configurations, cutting tools, speeds, feeds and machining processes. Develop and optimize CNC programs for multi-axis machining centers ranging from 2–9 axes and traditional manufacturing methods using PartMaker software for Okuma OSP, Mazak VCN and Mitsubishi Wire EDM. Select and specify tooling, cutter assemblies, backup programs, tool lists and setup requirements for CNC operations. Develop detailed shop process and setup sheets, instruction sheets and cutter assembly drawings to support machine setup and operation. Conduct CNC program prove-outs and trial runs, verify finished parts against specifications and make necessary program corrections. Optimize CNC programs following initial production runs to improve machining efficiency, reduce cycle times and identify cost-saving opportunities. Maintain and manage the master CNC program directory, ensuring proper file management, program accuracy, validity and accessibility. Assist in the design and development of jigs, tools, fixtures and special equipment for CNC applications and manufacturing processes. Coordinate and assign programming activities to CNC Programmers and Junior CNC Programmers while providing technical guidance and debugging support. Plan and organize special projects and long-range manufacturing initiatives. Set up and operate various CNC machines while performing required inspection and gauging to ensure parts meet established quality standards and specifications. Identify and recommend improvements to production methods, equipment performance and product quality to support efficiency and continuous improvement. Provide training, promote cross-training, support employee development and reinforce strong performance to encourage engagement and teamwork. Clean machines, tooling and parts and perform machine maintenance as required. Qualify measuring tools on a daily basis. Maintain appropriate records and documentation. Adhere to Bluefors quality and safety standards for all equipment, supplies and products. Perform other duties as assigned. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay Range: Level II : $31.80 - $38.00/hr. (DOE) What we expect from you High school diploma/GED and completion of an Apprenticeship Program; or an associate’s degree plus four or more years of related experience and/or training; or an equivalent combination of education and experience. Experience with PartMaker software and CNC programming for lathes and mills. Ability to read, interpret and apply engineering drawings, CNC program documentation, safety rules, operating and maintenance instructions, procedure manuals and training documents. Strong understanding of G&M codes, manually written coded programs, conversational programming and CAD/CAM software, including PartMaker. Ability to develop and troubleshoot CNC programs for multi-axis machining operations. Strong mathematical, analytical and critical-thinking skills with the ability to evaluate information, identify alternatives and implement effective solutions. Ability to monitor machine operation using gauges, dials and other indicators to ensure equipment is operating properly and parts meet established requirements. Strong written and verbal communication skills, with the ability to provide clear instructions, training and technical guidance to others. Sound judgment and decision-making skills, with the ability to prioritize and manage workload effectively. Strong attention to detail and commitment to quality and safety. We also appreciate Experience working with Okuma OSP, Mazak VCN and Mitsubishi Wire EDM equipment. Experience developing and optimizing programs for multi-axis CNC machining centers. Experience designing or developing jigs, fixtures, tooling and special equipment. Experience providing technical guidance, training or mentoring to CNC Programmers or other manufacturing employees. Experience supporting continuous improvement initiatives focused on machining efficiency, cycle time reduction, cost savings or product quality. Experience participating in special projects or long-range manufacturing initiatives. Physical Demands While performing the duties of a CNC Programmer, the employee is frequently required to stand, reach with arms and hands, and use hand and finger dexterity. The employee is occasionally required to walk, stoop, kneel, crouch or crawl, and talk and hear. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close, distance and peripheral vision, depth perception, and the ability to adjust focus. Work Environment This position operates in a manufacturing environment and interacts with internal customers in a professional, courteous and cooperative manner. Required PPE must be worn as applicable. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, risk of electrical shock and vibration. The noise level in the work environment is usually moderately loud. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job DescriptionJob Description The work involves responsibility for performing professional architectural work of limited scope in the planning and design of buildings and facilities. An employee in this class performs recurring work of limited scope in the planning and design of small scale projects in terms of such factors as size, cost, coordination of mechanical and electrical elements and design requirements or, as a member of a team, a phase of a larger project. The nature of the work requires the application of conventional architectural techniques. General supervision is received from a technical supervisor or department administrator. Does related work as required. Typical Work Activities • Prepares preliminary architectural drawings pursuant to statement of requirements that indicates the nature and scope of the project., • May compute probable cost and construction time required based upon estimates of quantities of materials and labor required, experience on past projects, and knowledge of current building market., • Prepares preliminary drawings where necessary, showing general characteristics of the structure and proposed design solutions, as well as preliminary cost estimate for project completion., • Prepares working drawings translating project scope into plans, elevations, sections and details showing design, location, and dimensions of various structural elements., • Reviews change order requests involving revisions to the architectural plan during construction stages of the project., • May attend final inspection of the project after completion to insure compliance with drawings and specifications.Knowledge, Skills, and Abilities, • Working knowledge of the principles, practices, and techniques of architecture., • Working knowledge of construction methods, functions and physical properties of building materials and building costs., • Working knowledge of structural, electrical, and mechanical engineering as related to building construction., • Working knowledge of applicable, codes, laws, rules and standards regulating the design and construction of buildings., • Skill in creating architectural drawings and design., • Ability to express ideas orally and in writing., • Physical condition commensurate with the demands of the position.Minimum Qualifications, • A) Graduation from a regionally accredited or New York State registered college or university with a baccalaureate degree in architecture; or,, • B) Graduation from a regionally accredited or New York State registered college or university with an associates degree in architectural technology and two (2) years of work experience, or its part-time equivalent, as an architectural technician or in an architectural drafting position in an architect's office or similar setting; or in construction management performing duties such as preparing specifications and cost and time estimations, interpreting building blueprints and developing drawings involving the design or revision of architectural plans during construction; or,, • C) Four (4) years of work experience, or its part time equivalent, in architectural design and planning relating to building structures (i.e. space design, plans, elevations, sections and details) involving the development of design from conceptual drawings to the design format used in the production of construction documents; or,, • D) An equivalent combination of training and experience as defined by the limits of (A), (B) and (C). Note: In all cases, candidates must show at least two (2) years of educational training or work experience involving architectural design and composition in architectural media, inclusive of architectural drafting and working drawings. Benefits • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro

Job Description Affinity Recruiting has an exciting opportunity for a 3rd shift Production Supervisor for a local distributor in the Syracuse, NY location! 55K – 65K per year (depending on experience) with some OT and this position has an amazing benefits package! Qualifications: • Coordinate and manage all production, housekeeping and support department activities, ensure proper and accurate paperwork, collect and/or distribute as needed, • Build people capabilities through effective employee relations, training, and communications, • Ensure compliance with all safety regulations, GMP's, OSHA, Company Policies and Procedures Company's mission statement, • Ensure compliance with Union contract and provide fair and consistent discipline., • Work in a fast paced, changing manufacturing environment, • Meet and/or exceed daily, monthly, and annual production requirements and standards Requirements: • Must have 3 years of Experience in supervision or leadership role, • Ability to work a flexible schedule - including occasional overtime/weekend work, • Previous experience in a high-speed manufacturing setting, • Excellent verbal and written communication, math, and computer skills, • Ability to lead/motivate team towards stated goals If you meet these requirements we encourage you to apply to this posting, with an updated resume, and a recruiter will reach out immediately!

Job DescriptionAbout the Job: The Salvation Army's Adult Rehabilitation Centers make a difference in people's lives. Through the collection and resale of gently used goods we are able to provide the financial support to assist men and women with a variety of social and spiritual afflictions. The in-residence rehabilitation program focuses on basic necessities with every man or woman being provided a clean and healthy living environment, good food, work therapy, leisure time activities, group and individual counseling, and spiritual direction. All our effort is focused on developing life skills and a personal relationship with God through Jesus Christ. More than just a job, each member of the team contributes to recycling goods that literally recycle and repair broken lives. The Accounting Clerk will perform a variety of clerical and organizational duties to support Bookkeeper and Payroll Clerk in functions of the finance office. Duties and Responsibilities: • Call each store to get the daily sales, volunteer, and production numbers. Enter these into management spreadsheets and distribute., • Review daily sales sheet for accuracy, gaps in Z totals (indicate on store voucher the reason opening Z differs from prior days closing Z), completeness including listing of credit card slips and batch summary, void slips, exempt sales, gift certificates validation for both sale and redeeming, signatures, etc. Validated deposit ticket MUST be attached. Enter the daily sales sheet into the Store database. If sales tax calculated versus tax collected is out-of-balance, more than $0.50, review data entry to see if tax collected was recorded as gift certificates or if store voucher did not list exempt sales items, but cash register tape did. Make sure to record sales which were exempted from tax., • Create invoices for welfare sales and mail. Follow up to collect outstanding invoices. Place copy of invoice in open invoice folder. When payment of welfare sales invoice is received, mark invoice paid, move copy of invoice from open invoice folder to paid invoice folder noting check number and date for payment, enter new store voucher into the store program (exclude from accounting) using the last working date of the month and give check to Bookkeeper for recording and deposit., • Act as custodian for beneficiary canteen tokens or tickets. Balancing token box, replenishing needed tokens, give bookkeeper new beneficiary token/ticket form to record., • Enter daily bale production summaries into the warehouse program. Enter shipping memo sales into the warehouse program open contract, verifying all shipping information on memo., • Submit forms for permits as needed by managers or supervisors and approved by Administrator., • Act as custodian for secondary petty cash fund. Review vouchers for completeness, supporting documentation adding machine tapes, signatures, and approvals, etc. before releasing cash. Sell vouchers from secondary petty cash fund to primary Petty Cashier (Payroll Clerk) not less than monthly to secure reimbursement to petty cash fund. Checks may be written to accounting clerk to replenish secondary petty cash if payroll clerk is out for extended period of time., • Responsible for distribution of daily mail. Process outgoing daily mail., • Order office supplies, purchase order as necessary and approved by Administrator., • Type and mail thank you letters to individuals and companies that make donations (based on the receipts provided by the Bookkeeper), • Other duties are assigned by immediate supervisor and/or Administrator. Qualifications: • High School diploma or equivalent., • Ability to prioritize, with attention to detail and excellent organizational skills., • Proficiency in Microsoft Office., • 2 years of related work experience preferred.

Job Description Envelope Press Operator Locations: Malvern, PA, Newington, CT & Syracuse, NY 1st Shift – Monday – Friday from 7:00 AM to 3:30 PM 2nd shift – Monday – Thursday from 3:30 PM to 1:30 AM (Syracuse, NY Only) Job Overview We are now hiring an Envelope Jet Press Operator to help us continue our growth. If you are excited to be part of a winning team, Dupli is a perfect place to get ahead. Responsibilities • Read instructions for the job and set up the press for efficient operation and quality output., • Make job ready by running to adjust print quality, hanging plates, mixing inks, and loading/repacking paper., • Troubleshoot equipment and production problems to ensure proper safety standards are maintained and keep the press in optimal running condition., • Monitor ink and adjust when necessary to ensure consistency throughout the entire press run., • Ensure efficient size change modifications are correct., • Regular and reliable attendance. Other Functions • Pull stock for operation and replace the unused stock in the designated area., • Assist other operators with challenging jobs., • Maintain machines and a clean work environment; follow proper safety procedures and safely perform all job duties., • Perform other functions as required. Qualifications • Offset printing experience is preferred but will consider training interested candidates. Knowledge, skills, and abilities • Able to perform basic mathematical skills including the use of measurement systems., • Mechanical aptitude with the ability to perform maintenance, repairs, and troubleshooting., • Knowledge of feeding and delivery systems., • Strong attention to detail, well organized with the ability to prioritize, coordinate, and simultaneously maintain multiple projects; approachable, flexible, and adaptable to change., • Customer service-oriented and dependable, with the ability to work well under pressure in an environment full of deadlines, providing accurate output., • Highest level of professionalism with the ability to maintain confidentiality., • Effective verbal and written communication skills; ability to communicate at all levels of organization and work well within a team environment in support of company objectives., • Able to maintain a clean work environment and follow safety requirements and principles., • Strong organizational critical thinking, questioning, and problem-solving skills. Physical and Environmental Requirements • Lifting: Regularly lift 25 lbs. waist-high; occasionally lift up to 50 lbs., • Mobility: Must be able to stand for long durations; frequent bending, stooping, kneeling, and reaching required., • Environment: Exposure to moving mechanical parts, ink, paper dust, and variable temperatures in a warehouse setting., • Equipment Use: Frequent use of forklifts, pallet jacks, and other material-handling tools. Required Knowledge and Skills • Mechanical aptitude and understanding of printing press operations., • Ability to read job specifications and use measuring instruments (e.g., rulers, gauges)., • Strong attention to detail and troubleshooting skills., • Ability to follow written and verbal instructions precisely., • Basic computer proficiency for production documentation. Preferred Experience • Prior offset printing or press operation experience preferred., • Willingness to train candidates with strong mechanical aptitude. Safety and Compliance • Must adhere to OSHA regulations and company-specific safety practices., • Participate in required safety training and drills., • Report all injuries, near misses, or safety hazards to a supervisor immediately. Equal Employment Opportunity Statement Dupli Envelope & Graphics is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, veteran status, genetic information, or any other protected characteristic as outlined by federal, state, or local laws. 1st Shift – Monday – Friday from 7:00 AM to 3:30 PM 2nd shift – Monday – Thursday from 3:30 PM to 1:30 AM (Syracuse, NY Only)

Job Description We are looking for a CNC Machine Operator to join our manufacturing team at Bluefors in Syracuse, NY. In this role, you will support the production of precision components used in advanced cryogenic systems that power breakthroughs in quantum technology, scientific research, and other cutting-edge industries. This is an excellent opportunity for someone who enjoys hands-on machining work, takes pride in quality craftsmanship, and wants to grow within a collaborative, high-tech manufacturing environment. Interested? Keep reading! Your tasks as a CNC Operator will include operating CNC machines and machining centers to fabricate metallic and nonmetallic parts that meet quality and production standards. You will load raw materials into machines, inspect finished parts according to established procedures, and perform quality inspections of first-piece parts as verified by a supervisor or quality technician. You will troubleshoot machine operations, monitor machining performance, and adjust as necessary to ensure parts remain within specifications. In addition, you will use measuring tools daily, clean and deburr finished parts, monitor inventory levels for tooling and materials, and maintain a clean and organized workspace. You will also support machine maintenance activities and complete ongoing training requirements to support technical growth and continuous improvement. We are looking for a CNC Operator with a high school diploma or GED and at least one year of manufacturing experience, or a one-year technical certificate with related experience, or an equivalent combination of education and experience. You should have the ability to set up and use measuring tools and read and interpret blueprints, with GD&T knowledge considered a plus. The ideal candidate will have strong attention to detail, the ability to follow procedures accurately, and a commitment to producing high-quality work. Familiarity with g-code programming and CNC machining processes is important, and CNC programming experience is a plus. You should be dependable, safety-conscious, and able to work effectively both independently and as part of a team. We also appreciate candidates who demonstrate strong mechanical aptitude and a proactive approach to troubleshooting and problem-solving. Experience working in a manufacturing environment focused on quality and precision machining will help you stand out. A willingness to continue learning and developing technical skills, along with a team-oriented mindset and strong organizational skills, is highly valued. Candidates who align with our values of quality, collaboration, continuous learning, and safety will thrive in this role. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay range: $19.25 - $23.07/hour (DOE) Main Responsibilities include the following: -Operate CNC machines and machining centers to fabricate required parts -Use qualified measuring tools on a daily basis -Feed and load raw materials into CNC machines -Inspect parts according to established policies and procedures -Troubleshoot machines and maintain machine operations -Monitor machine operation and adjust controls as required -Detect machine malfunctions and worn or damaged tooling -Perform inspection operations to maintain quality standards and specifications -Clean machines, tooling, and finished parts as required -Stack and organize raw and finished materials properly within storage areas -Perform first-piece quality inspections as verified by a supervisor or quality technician -Monitor and record tooling, supplies, and raw material inventory usage -Complete ongoing technical training requirements -Maintain good housekeeping and a clean work environment -Perform additional duties as assigned What We Expect from You -High school diploma or general education degree (GED), or equivalent combination of education and experience -One year of manufacturing experience preferred -Technical certificate with related machining experience preferred -Ability to set up and use measuring tools -Ability to read and understand blueprints and technical drawings -Familiarity with GD&T principles preferred -Ability to read and understand g-code programming -Strong attention to detail and commitment to quality -Strong mechanical aptitude and troubleshooting skills -Dependability and ability to work independently and in a team environment -Commitment to safety and following established procedures -Willingness to continue learning and developing technical skills -Ability to align with company Leadership Principles and workplace competencies -Excellent command of English, both written and spoken We Also Appreciate -CNC programming experience -Experience working in a precision manufacturing environment -Familiarity with quality inspection processes and standards -Strong organizational and time management skills -A proactive approach to troubleshooting and process improvement -Ability to adapt in a fast-paced production environment -A collaborative, team-oriented mindset -A positive attitude and strong alignment with company values, including safety, diversity, and organizational effectiveness Physical Demands While performing the duties of this job, the employee may be required to stand for extended periods, use hands and fingers for detailed machining tasks, and frequently lift or move materials and tooling. The role may involve bending, reaching, stooping, and handling finished parts and raw materials. Specific vision abilities required include close vision, depth perception, and the ability to adjust focus. Work Environment This role operates in a manufacturing environment and regularly works around moving mechanical parts and machining equipment. The employee may occasionally be exposed to noise, airborne particles, heat, vibration, and other manufacturing-related conditions. Required personal protective equipment (PPE) must be worn as applicable. Employees are expected to maintain a safe, clean, and organized workspace at all times. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

A Production Supervisor provides leadership and supervision to hourly production employees during designated shift. Manage, coordinate, facilitate and provide leadership to first line supervisors, production employees, maintenance and other support staff. Lead technical support staff in troubleshoot

Job Description Pay Range: $19.00 - $25.00 hourly About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Position Overview: Detail Team Lead is a front-line supervisor role, responsible for directly managing and developing a team of hourly associates in an Inspection Center to regularly achieve production targets. What you'll be doing: • Manage the movement of cars into and out of the Inspection Center safely for repairs, while meeting or exceeding set production and quality goals., • Meet or exceed inventory production goals on a daily, weekly and monthly basis., • Oversee day-to-day activities of assigned team; identify team's strengths and weaknesses; determine areas of opportunity and the appropriate steps to improve., • Engage assigned team, provide appropriate coaching, development and performance management; offer feedback and demonstrate desired skills., • Create a work and team environment that inspires positive communication, team cohesion, and adherence to Carvana's Values., • Proactively communicate information to team members, providing clear understanding of expectations, performance measures, and goals., • Prevent and resolve conflict among team members., • Monitor and ensure adherence to systems, policies, procedures, and performance standards., • Review and approve identified mechanical and physical defects of incoming inventory., • Lead a team of production associates and partner with the Inspection Center General Manager to repair or reject inventory based on estimated cost of repairs and/or the overall quality of the vehicle., • Train a team of production associates using Quality Control standards to identify and complete repairs effectively and efficiently the first time, minimizing re-checks and delays in production., • Identify and complete repairs effectively and efficiently the first time, to minimize re-work and delays in production., • Conscientiously work in ways that decrease the possibility of injury to yourself or other team members in the shop due to spills or other preventable hazardous conditions., • Effectively manage multiple associates, including ensuring appropriate employee development and performance management. What the job requires: To be able to do your job at Carvana, there are some basic requirements we want to share with you. • High School Diploma or GED equivalent, • Experience using computers, • Must be at least 18 years of age, • Demonstrated functional expertise in one or more areas pertaining to Carvana's reconditioning process, • Demonstrated understanding of our current reconditioning processes and lean principles, • Valid driver's license with a clean driving record (no DUIs and no more than two moving violations in the last 3 years)., • Must be able to lift up to 60 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels, • Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Requires use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Ability to effectively delegate tasks to team members., • Ability to communicate and interact with others effectively in a professional, courteous manner., • Ability to communicate clearly and concisely, both written and oral., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Ability to multitask and prioritize effectively., • Ability to resolve complex issues with guidance from others., • Ability to work overtime and on weekends., • Ability to work variable schedule(s) as necessary. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. What we'll offer in return • Full-Time Position with a competitive salary, • Medical, Dental, and Vision benefits, • 401K with company match, • A multitude of perks including student loan payments, discounts on vehicles, benefits for your pets, and much more, • A great wellness program to keep you healthy and happy, both physically and mentally, • Access to opportunities to expand your skillset and share your knowledge with others across the organization, • A company culture of promotions from within, with a start-up atmosphere allowing for varied and rapid career development, • A seat in one of the fastest-growing companies in the country Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Kilian Manufacturing, a Regal Rexnord company, is seeking a highly skilled Machining Department Technical Lead (Master Machinist) to serve as the senior technical leader for Davenport and Acme Gridley multi-spindle screw machines within our Syracuse machining operation. This is a hands-on leadership role for an experienced machinist who excels at solving complex manufacturing challenges, developing machining processes, mentoring others, and driving operational performance. The successful candidate will combine deep technical expertise with strong shop floor leadership to support production, safety, quality, and continuous improvement initiatives. What You'll Do Technical Leadership • Serve as the primary machining expert for Davenport and Acme Gridley multi-spindle screw machines., • Lead complex setups, troubleshooting, repairs, and process optimization activities., • Develop machining processes, tooling strategies, setup documentation, and work instructions., • Calculate and optimize feeds, speeds, tooling, cycle times, and machining parameters., • Support new product launches and process validation activities. Production & Operational Support • Establish daily machining priorities based on customer demand and production schedules., • Coordinate staffing, machine capacity, tooling, and materials to meet production goals., • Monitor quality, throughput, scrap, downtime, and schedule attainment., • Identify production constraints and implement corrective actions. Team Development • Train and mentor operators, setup technicians, and machinists., • Transfer technical knowledge and develop future technical leaders., • Help create standardized processes, setup sheets, and troubleshooting guides., • Foster a culture of accountability, craftsmanship, and continuous improvement. Equipment Reliability & Continuous Improvement • Lead machine repair, rebuild, and preventative maintenance activities., • Drive improvements in uptime, setup reduction, cycle times, quality, and productivity., • Participate in root cause analysis and corrective action initiatives., • Promote safe work practices and compliance with quality standards. What We're Looking For Required Qualifications • 10+ years of machining experience in a manufacturing environment., • 5+ years of advanced setup, troubleshooting, and repair experience on Davenport and/or Acme Gridley multi-spindle screw machines., • Expertise in machining steel, stainless steel, aluminum, and brass., • Strong blueprint reading and GD&T interpretation skills., • Experience with precision measuring equipment including micrometers, calipers, indicators, bore gauges, and thread gauges., • Demonstrated experience leading production priorities and mentoring technical employees., • Strong problem-solving, mechanical aptitude, and communication skills. Preferred Qualifications • Machining apprenticeship, journeyman certification, technical degree, or equivalent trade training., • CNC setup and programming experience., • Previous experience as a lead machinist, technical lead, setup lead, or supervisor., • Experience in high-volume precision manufacturing., • Lean manufacturing and continuous improvement experience., • ERP/MRP system experience. Why Join Kilian Manufacturing? At Kilian Manufacturing, we take pride in producing high-quality precision components while investing in our people and manufacturing expertise. This role offers the opportunity to: • Make a significant impact on production performance and operational excellence., • Mentor and develop the next generation of machining talent., • Work with legacy and modern machining technologies., • Join a respected manufacturing organization that values craftsmanship, accountability, and continuous improvement. Physical Requirements Must be able to work safely in a manufacturing environment, stand for extended periods, perform machine setup and troubleshooting activities, lift and move tooling and materials, and wear required personal protective equipment. Reasonable accommodations will be provided in accordance with applicable law. Compensation & Benefits Compensation: Competitive salary commensurate with experience, skills, and qualifications. Expected hiring range is $38.00 - $50.00 per hour, with consideration given for extensive Davenport, Acme Gridley, CNC, technical leadership, and manufacturing expertise. Actual compensation will be determined based on factors including skills, experience, education, certifications, and business needs. Comprehensive Benefits Package Includes: • Medical, Dental, and Vision Insurance, • Health Savings Account (HSA) and Flexible Spending Accounts (FSA), • 401(k) Retirement Plan with Company Match, • Company-Paid Life Insurance, • Short-Term and Long-Term Disability Coverage, • Paid Vacation and Paid Holidays, • Employee Assistance Program (EAP), • Wellness Programs and Employee Resources, • Tuition Assistance and Professional Development Opportunities, • Career Growth Opportunities within Regal Rexnord's global organization, • Employee Discount Programs Why Join Regal Rexnord and Kilian Manufacturing? This is an opportunity to join a respected manufacturing organization where your technical expertise can make a significant impact. As the Machining Department Technical Lead, you'll help shape the future of our machining operation by improving processes, developing talent, solving complex manufacturing challenges, and delivering world-class products to our customers. You'll be part of a team that values: • Technical excellence, • Continuous improvement, • Safety and quality, • Employee development, • Collaboration and accountability, • Manufacturing innovation Equal Opportunity Employer Kilian Manufacturing, a Regal Rexnord company, is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description Pay Range: $24.00 - $32.00 hourly About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Position Overview: Lead Mechanic is a front-line supervisor role, responsible for directly managing and developing a team of hourly associates in an Inspection Center to regularly achieve production targets. What you'll be doing: • Manage the movement of cars into and out of the Inspection Center safely for repairs, while meeting or exceeding set production and quality goals., • Meet or exceed inventory production goals on a daily, weekly and monthly basis., • Oversee day-to-day activities of assigned team; identify team's strengths and weaknesses; determine areas of opportunity and the appropriate steps to improve., • Engage assigned team, provide appropriate coaching, development and performance management; offer feedback and demonstrate desired skills., • Create a work and team environment that inspires positive communication, team cohesion, and adherence to Carvana's Values., • Proactively communicate information to team members, providing clear understanding of expectations, performance measures, and goals., • Prevent and resolve conflict among team members., • Monitor and ensure adherence to systems, policies, procedures, and performance standards., • Review and approve identified mechanical and physical defects of incoming inventory., • Lead a team of production associates and partner with the Inspection Center General Manager to repair or reject inventory based on estimated cost of repairs and/or the overall quality of the vehicle., • Train a team of production associates using Quality Control standards to identify and complete repairs effectively and efficiently the first time, minimizing re-checks and delays in production., • Identify and complete repairs effectively and efficiently the first time, to minimize re-work and delays in production., • Conscientiously work in ways that decrease the possibility of injury to yourself or other team members in the shop due to spills or other preventable hazardous conditions., • Effectively manage multiple associates, including ensuring appropriate employee development and performance management. What the job requires: To be able to do your job at Carvana, there are some basic requirements we want to share with you. • High School Diploma or GED equivalent, • Experience using computers, • Must be at least 18 years of age, • Demonstrated functional expertise in one or more areas pertaining to Carvana's reconditioning process, • Demonstrated understanding of our current reconditioning processes and lean principles, • Valid driver's license with a clean driving record (no DUIs and no more than two moving violations in the last 3 years)., • Must be able to lift up to 60 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels, • Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Requires use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Ability to effectively delegate tasks to team members., • Ability to communicate and interact with others effectively in a professional, courteous manner., • Ability to communicate clearly and concisely, both written and oral., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Ability to multitask and prioritize effectively., • Ability to resolve complex issues with guidance from others., • Ability to work overtime and on weekends., • Ability to work variable schedule(s) as necessary. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. What we'll offer in return • Full-Time Position with a competitive salary, • Medical, Dental, and Vision benefits, • 401K with company match, • A multitude of perks including student loan payments, discounts on vehicles, benefits for your pets, and much more, • A great wellness program to keep you healthy and happy, both physically and mentally, • Access to opportunities to expand your skillset and share your knowledge with others across the organization, • A company culture of promotions from within, with a start-up atmosphere allowing for varied and rapid career development, • A seat in one of the fastest-growing companies in the country Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description At St. Camillus, we’re Centered on Celebrating our Employees, our team is what makes St. Camillus such a great place to work! We are currently hiring a Sous Chef to join our team! Responsibilities The primary purpose of this position is to prepare foods according to recipes and production tallies and in accordance with all food safety and sanitation regulations. This position works closely with the Executive Chef, as part of a team to provide nutritionally adequate meals to Residents and Patients of the facility. The responsibilities include but are not limited to: • All employees are expected to perform any work that is needed as determined by a supervisor or manager. This position primarily involves the following duties and responsibilities:, • Cooks and otherwise prepares foods by utilizing approved recipes and following prescribed production standards to ensure the quality and consistency of product’s taste and presentation. Ensures all deadlines are met in food production based on production orders., • Properly stores foods in designated areas following all corporate, State, and Federal food safety and sanitation procedures., • Responsible for ensuring proper food handling, presentation, portion control, and maintenance of proper serving temperatures., • Maintains sanitation of equipment, supplies and utensils. Cleans workstation thoroughly before leaving area. Keeps display equipment clean and free of debris during meal service to assure compliance with all sanitation, safety, production, and merchandising requirements., • Interacts with customers to ensure customer satisfaction and resolve complaints in a friendly, service-oriented manner. Relays relevant comments directly to supervisor., • Demonstrates complete understanding of daily menu items and accurately explains this to associates and customers., • Consistently exhibits the ability to keep up with peak production and service hours., • Monitors inventory and deliveries of product and supplies. Tracks product production, consumption and waste. Informs supervisor, when supplies or product are low., • Supervise hourly food service associates. Includes interviewing, scheduling, payroll, training, counseling, participating in reviews and recommending disciplinary action, as appropriate., • Assist with other functions and duties as assigned. Qualifications • Associate's degree or equivalent from Culinary or technical school; or 1 - 3 years of related experience and/or training; or equivalent combination of education and experience. Supervisory experience preferred., • Other Qualifications: Food Handler’s Permit; ServSafe training and certificate as required by applicable state and county. Employee Benefits: • Daily Pay, • No Mandated Shifts, • Generous Paid Time Off, • Affordable Health/Dental/Vision Plans, • Company Funded Life Insurance and Health Reimbursement Account, • Retirement Plan, • Tuition Reimbursement, • On the Centro Bus Line, • Free parking, • On-site cafeteria Why work for St. Camillus? Our Mission: The Centers at St. Camillus is a non-denominational, not-for-profit organization dedicated to caring for life through a broad range of health care services. Our Vision: To be the provider of choice for compassionate and innovative care If you are interested in joining a team of professionals who are committed to providing high quality services in a caring environment, we want to hear from you! EOE/Affirmative Action Employer Visit our website at www.st-camillus.org

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Responsible for performing breakdown and preventative maintenance on production and supporting equipment. $10,000 Sign-on Bonus Current Openings • Full Time - 2nd & 3rd Shift, • Part Time & Flex Scheduling also available Essential Duties & Tasks • Carry out tasks issued by maintenance shift supervisor., • Troubleshoot support system problems using basic problem solving skills., • Perform preventative maintenance tasks on equipment assigned to you., • Complete all standard work orders and preventative maintenance tasks assigned. Submit all completed paperwork., • Record information in required logbooks for systems history and continuous improvement., • Record any parts/components used for repairs to ensure replenishment of On-Hand balances are maintained, and properly dispose of used parts/components., • Ensure quality standards set by the company are adhered to after PM’s and/or repairs are made to equipment., • Perform machine repairs based upon a maintenance call or an assignment in a timely fashion., • Maintain cleanliness of the areas you are working in; properly dispose the parts/components you have replaced., • Promote a safe and harmonious work environment with adherence to company policy, procedures, safety and health regulations., • Maintain compliance with S.Q.F. Certification., • Perform other duties as assigned. Minimum Requirements • Minimum of a GED or High School Diploma. Must be a minimum of 18 years of age. • Technical training or electrical/mechanical technician degree, or verifiable comparable experience., • Food manufacturing background is a plus., • Must be able to operate forklifts and pallet jacks (electric/manual)., • Experience with programmable logic controller, instruments and controls is preferred., • Minimum of 2-3 years of experience within the mechanical field; working with boilers, ammonia refrigeration, air compressors, air handling units and HVAC is a plus. Area Specific • Must be able to work within varied temperature ranges; Must be able to work with numerous forms of energy such as electricity, steam, pneumatic, mechanical; Must be able to read, interpret and comprehend schematics and blueprints; Must be able top use Human Interface Machines and computers (stop and start-up); Must be able to lift up to and including 50lbs. Knowledge, Skills, and Abilities Mechanical: • Knowledge of how your assigned equipment operates., • Basic knowledge & troubleshooting skills in mechanics. Experience with; plumbing, pumps, seals & gaskets, drive systems (gear, belt, and chain), bearings & bushings, fastener thread designations & properties of lubricants., • Basic knowledge & troubleshooting skills in pneumatics. Experience with; basic understanding of how pneumatics work, knowledge of the function and type of control components., • Basic knowledge & troubleshooting skills in hydraulics. Experience with; basic understanding of how hydraulics work, knowledge of the function and type of control components, read and understand basic hydraulic prints., • Basic knowledge & troubleshooting skills in electrical. Experience with; understanding basic single phase wiring, correct use of a multimeter, AC & DC power, fuses and breakers, read and understand basic electrical prints, basic knowledge of three phase wiring, identify and change three phase motor rotation, proper motor and name plate reading, actuators & sensors, PLC. Other: • Knowledge of general computer functions such as Microsoft Office programs, spreadsheets, etc., • Knowledge of basic safety regulations., • Skill in multi-tasking., • Skill in basic problem solving., • Skill with basic math procedures., • Skill in team-building., • Skill in interpersonal and communication., • Possess good mechanical aptitude to disassemble and assemble all types of equipment., • Ability to communicate with co-workers, management team members, and other individuals in a courteous and professional manner., • Ability to climb ladders, stairs or use a scissor lift to inspect and/or repair equipment., • Ability to work in a fast paced environment., • Ability to pay close attention to detail and coordinate various activities simultaneously., • Ability to complete assigned tasks. Physical Dimensions Job-related physical abilities an individual needs to possess in order to perform the job in a satisfactory manner. • Seeing: Must be able to read reports and use computer., • Hearing: Must be able to hear well enough to communicate with coworkers., • Standing/Walking/Mobility: Must be able to stand to open files and operate office equipment or mechanical equipment; mobility between departments or physical locations, and attend meetings of coworkers and management., • Climbing/Stooping/Kneeling: Must be able to climb, stoop, or kneel to perform routine tasks within the scope of job., • Lifting up to 50 lbs./ Pulling/Pushing., • Touching/Grasping/Feeling: Must be able to write, type, and use office equipment or other equipment; along with handling material and equipment. Expectations • Ability to perform functions in a fast paced environment., • Promote and lead by example a safety culture that drives safety as number one., • Able to work in a varied temperature environment., • Adheres to Company Policy and Procedures., • Maintain a flexible work schedule to provide program continuity and visibility., • Acts as a role model outside and within the Company., • Performs duties as workload necessitates., • Maintains a positive and respectful attitude., • Meets departmental productivity standards., • Provides guidance for coworkers as needed or as requested., • Communicates regularly with supervisor about job-related issues., • Demonstrates flexible and efficient time management and ability to prioritize workload., • Consistently reports to work on time prepared to perform duties of position. Pay: $26-$36 per hour* • The salary range listed for this position represents the good faith and reasonable minimum and maximum pay for this role at the time of posting. Actual compensation may vary based on factors including, but not limited to, experience, skills, training, knowledge, education, and overall qualifications. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

ABOUT OUR DISTRICT The Syracuse City School District is On the Rise! We are undergoing a new phase of innovation and transformation with the goal of ensuring that all students graduate high school with the skills needed to be ready for college and career. For Syracuse, all means all. The School Board and Syracuse community have charged the Superintendent with improving student achievement, and she is seeking a dedicated and diverse team of educators to partner with her in moving the district toward its goals. The Syracuse City School District represents 35 schools and programs, including 6 high schools, 6 middle schools, 6 K-8 schools, 13 elementary schools, and 4 alternative education programs, serving approximately 19,000 students Pre-K-12. Of these students, 82.3% qualify for free or reduced-price lunch, 20.1% are served by the Office of Special Education, and 83% are students of color. Location: Print Shop at Bova DISTINGUISHING FEATURES OF THE CLASS This is entry level work involving the routine preparation and operation of one or more of a variety of office machines such as photocopiers, mimeograph machines, addressing machines, collators, inserters, staplers and bursters. Incumbents adjust the machine, tend the machine during its operation, and perform minor maintenance requiring only elementary knowledge and skills. Incumbents may also be assigned basic clerical or general office duties depending on location. Work is performed under direct supervision and in accordance with pre-established procedures. Office Machine Operators have no supervisory responsibilities. Does related work as required. Incumbents may specialize by the exclusive operation of one or two machines; however, no title is used to describe such positions. Specialized titles are used only where a specialized skill or prerequisite training or experience is required such as Word Processing Machine Operator, Duplicating (Offset Print) Machine Operator or Data Entry Operator. Although Office Machine Operator describes positions primarily involved the operation of a variety of office machines, other general or specialized clerical classes also may regularly operate such machines in connection with those duties which form the basis of their classification. TYPICAL WORK ACTIVITIES • The following are typical activities and tasks performed by Office Machine Operators however, the particular tasks performed vary depending on the type of machine(s) operated., • Prepares machine for operation by obtaining supplies loading machines and making routine tension and alignment adjustments., • Makes test run of material, observing output, to check adjustments and make further adjustments as necessary., • Tends machine during its operation to insure material is flowing properly and smoothly through machine., • Removes jammed material and make necessary adjustments to continue operation., • Adds toner, developer, fuser oil or other material as needed to keep machines functioning in most efficient manner., • Loads and unloads material from machine as necessary., • Records production figures for assignments completed., • Performs minor maintenance cleaning and repairs on machines in accordance with operating instructions to insure optimum performance., • Uses hand tools such as pliers, wrenches and screwdrivers to adjust machine and to perform minor maintenance., • Calls for service when machine malfunctions or reason for stoppage exceeds operator's knowledge., • Maintains simple logs or inventories as required by supervisor., • May perform general office duties as required such as filing, answering the telephone, simple record keeping, and making pickups and deliveries to various offices. FULL PERFORMANCE KNOWLEDGES, SKILLS, ABILITIES AND PERSONAL CHARACTERISTICS • Working knowledge of the operation, adjustment and care of machines operated., • Ability to identify unsatisfactory machine output., • Ability to coordinate eye and hand movement in making minor repairs and adjustments to machines., • Ability to use hand tools such as screwdrivers, pliers and wrenches., • Ability to carry out simple written and oral instructions., • Ability to stand, walk and stoop for periods of time., • Ability to lift standard size package of paper and liquid supplies., • Physical condition commensurate with the demands of the position. MINIMUM QUALIFICATION There are no minimum qualifications for this class. NOTE: Incumbents may be required to complete training courses of machine manufacturer while on the job. WORKING HOURS: This position will work 40 hours per week, 12 months per year. This position is full-time. This position is non-exempt. SALARY: The current starting salary for this position is $21.63 per hour per the Unit 9 contract. QUALIFICATIONS: • To be considered, all candidates must meet the minimum qualifications of the position as outlined on the Onondaga County Civil Service job specifications for this title., • The successful candidate will be required to pass a fingerprint-based background check, at the cost of $107.50 to the candidate., • City Residents are encouraged to apply! The Onondaga County Civil Service job description for this position can be viewed by clicking here. recblid yy7nnoh3fd25005znedl0d7gvc81tc

About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. Position Overview Lead daily plant operations at our South Onondaga sand and gravel operation, ensuring safe, efficient aggregate production while developing teams, improving performance, and supporting business goals. What You'll Be Doing + Lead and coordinate plant operations in a quarry environment, ensuring safe and efficient production of aggregates materials to meet targets + Monitor and optimize performance of crushing, screening, and conveying equipment; partner with maintenance to address breakdowns and minimize downtime + Drive continuous improvement initiatives focused on throughput, material quality, and cost efficiency across plant operations + Maintain accurate production, inventory, and shift reports; ensure compliance with MSHA regulations and company standards + Promote a strong safety culture by reinforcing safe work practices, conducting inspections, and leading by example + Provide direction and support to plant personnel, fostering teamwork, accountability, and operational discipline What Are We Looking For + Experience in aggregates, mining, or heavy industrial manufacturing environments preferred + Working knowledge of crushing, screening, conveying systems, and mobile or stationary plant equipment + Strong leadership and communication skills with the ability to lead crews in a high-production quarry environment + Ability to interpret production data, identify trends, and make real-time operational decisions + Solid understanding of safety standards and regulations (MSHA experience preferred) + Hands-on problem-solving skills with the ability to adapt quickly in a fast-paced, outdoor operation + Collaborative mindset with the ability to work cross-functionally with maintenance, quality, and operations teams Work Environment This position operates in an outdoor quarry and plant environment with exposure to moving equipment, varying weather conditions, dust, and elevated noise levels. Personal protective equipment (PPE) is required at all times. What We Offer + $84,900 to $113,193/yr base salary and participation in our annual incentive plan + 401(k) retirement savings plan with an automatic company contribution as well as matching contributions + Highly competitive benefits programs, including: + Medical, Dental, and Vision along with Prescription Drug Benefits + Health Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) + AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance + Paid Bonding Leave, 15 days of Paid Vacation, 56 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled Req ID JR10018347 As part of our hiring process, we may use AI-assisted tools to support the screening and evaluation of candidate applications and interviews. These tools help streamline the initial assessment, but all decisions about candidate advancement are made by human recruiters and hiring managers. While technology supports early steps, every interview will be handled by experienced recruiters and hiring managers to provide a personal touch.

Job Description Job Summary: The Sales Consultant is directly responsible for selling new and used vehicles at dealership gross profit, volume, and customer satisfaction standards. Essential Job Duties and Responsibilities: (Additional duties as assigned) • Realize that business is built on customer satisfaction and devote yourself to guaranteeing satisfaction to customers., • Give feature presentations of new or used vehicles tailored to the customer’s interests and needs., • Demonstrate new and used vehicles (includes test drives), • Deliver vehicles to customers. The delivery process includes review of the vehicle’s operating features, warranty, and paperwork; and it lays the foundation for customer loyalty., • Attend sales meetings., • Maintain an owner follow-up system that encourages repeat business and makes the owner conscious of the sales representative so that the customer will refer leads and prospects., • Maintain a prospect development system which includes a group of prospect locators and sales associates., • Keep abreast of new products and customer benefits of new features, accessories, etc., • Assist in lot and inventory maintenance such as moving cars, cleaning off snow, keeping track of keys and keyboard, etc., • Maintain CSI in top 10% of group, • It is your responsibility to support and endorse dealership policies and procedures as set forth by Dealership Management and Manufacturers’ standards. Additional: • Establish personal income goals that are consistent with dealership standards of productivity. The minimum production standard is eight new and used deliveries per month., • Devise a strategy to meet these goals., • Provide a lease presentation to every customer., • Work according to manufacturers’ standards., • Report to management concerning objectives, planned activities, reviews and analyses as requested., • Review and analyze actions at the end of each day, week, month, and year to determine how to better utilize time or plan more effectively., • Understand the terminology of the automobile business and keep abreast of technological changes in the product., • Familiarize themselves with competitive products, including equipment, prices, models, series, and trading practices., • Work with the service department in accordance with dealership policy, emphasizing to the customer the quality and availability of repairs available in the service department., • Know and understand the federal, state, and local laws which govern retail auto sales., • All Salespeople work to the highest standards of customer satisfaction and strive to be within the top 10% of group. Required Experience and Education: • High School Diploma or General Educational Diploma (GED). Additional Requirements: • Valid New York State Driver License. Required Skills and Attributes: • Ability to prioritize and organize work in a multitasked environment., • Excellent verbal and written communication skills., • Attention to detail., • Strong organizational skills including the ability to manage multiple tasks and details simultaneously., • Financial and accounting knowledge., • Ability to work productively in a fast paced, stressful environment. Equipment, Machines and Software Used: • Computer software: Microsoft Office to include Word, Outlook, Excel, and CDK. Physical and Mental Requirements: • Ability to sit, stand, walk, talk, hear, use hands, grasp, handle or feel, push, pull, reach, crouch, bend, kneel, climb, and perform repetitive motions of the hands and/or wrists., • Will stand and move throughout the dealership facility (lot, showroom, service department, offices) for most of the shift. Will spend time outdoors showing vehicles to prospective customers and to drive vehicles in traffic during test drives Physical Exertion: • Exerts up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently to lift, carry, push, pull, or otherwise move objects., • Light exertion can involve sitting, walking and/or standing most of the time. Environmental Conditions: • Work is performed in a throughout the dealership facility (lot, showroom, service department, offices)., • Occasional weekend and evening hours are required This position is a base salary plus commission. Hazards and Safety Precautions: • Hazards: Slips, trips and falls, ergonomic injuries, and occasional lifting., • Safety Precautions: Breaks are encouraged to allow for stretching and training is provided covering slips, trips, and falls, safe lifting and stretching techniques.Disclaimer:, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The dealership reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job DescriptionAbout the Job:The Salvation Army's Adult Rehabilitation Centers make a difference in people's lives. Through the collection and resale of gently used goods we are able to provide the financial support to assist men and women with a variety of social and spiritual afflictions. The in-residence rehabilitation program focuses on basic necessities with every man or woman being provided a clean and healthy living environment, good food, work therapy, leisure time activities, group and individual counseling, and spiritual direction. All our effort is focused on developing life skills and a personal relationship with God through Jesus Christ. More than just a job, each member of the team contributes to recycling goods that literally recycle and repair broken lives. The Salvation Army Adult Rehabilitation Center is seeking a Senior Sales Associate to assist in creating and sustaining a pleasant work environment and excellent customer relationships: • The Senior Sales Associate will assist the management team in meeting sales, production, and expense budget goals to maintain a profitable operation, in scheduling of store personnel, in completion of payroll information for all staff, in receiving applications and participating in interviews as requested, and in training, direction, and supervision of new employees., • The Senior Sales Associate will ensure that store personnel are aware of and in compliance with all policies, procedures, and government regulations, that sales reports and other required paperwork are completed and forwarded to the finance office daily, and that the store is well stocked., • The Senior Sales Associate will be backup for the Store Manager or Assistant Store Manager as needed. The position will support the work therapy program component of The Salvation Army Adult Rehabilitation Centers by providing to beneficiaries; an example of professional conduct, work habits, and supervision (as directed by Supervisor). About The Salvation Army Syracuse ARC:For more than 100 years, The Salvation Army has operated rehabilitation facilities across the country that provide help and hope to individuals with a variety of problems, including issues relating to substance abuse. Our charitable residential programs offer spiritual, emotional, and social assistance in an environment designed to help participants live healthy, fulfilling lives.

Position Summary The Maintenance Supervisor is responsible for leading maintenance activities within a manufacturing environment to ensure equipment reliability, minimize downtime, and support efficient production. This role oversees preventive maintenance, equipment repairs, facility upkeep, and continuous improvement initiatives while providing day-to-day leadership to the maintenance team. Key Responsibilities • Lead and support the maintenance team in daily equipment and facility maintenance activities., • Improve equipment reliability and reduce production downtime., • Oversee preventive and predictive maintenance programs and ensure work is completed on schedule., • Troubleshoot equipment issues and coordinate timely repairs., • Maintain appropriate maintenance parts, tools, equipment, and inventory., • Support continuous improvement and equipment reliability initiatives., • Maintain and improve the overall condition of the manufacturing facility., • Partner with production, engineering, and other departments to resolve equipment and operational issues., • Develop and coach maintenance team members., • Maintain appropriate maintenance records, reports, and documentation., • Perform other related duties as needed. Qualifications • 8+ years of maintenance experience, • 3+ Supervisor or management experience, • High school diploma or equivalent required., • Technical degree, engineering degree, or related education preferred., • Significant maintenance experience within a manufacturing or industrial environment., • Previous maintenance leadership or supervisory experience preferred., • Experience with preventive maintenance and equipment reliability programs., • Strong mechanical and/or electrical troubleshooting knowledge., • Familiarity with automated manufacturing equipment and industrial systems., • Strong problem-solving, organizational, and communication skills., • Ability to manage multiple priorities in a fast-paced manufacturing environment.

Job Description The Customer Service Team Leader is responsible for supporting the Store Manager by serving as the Manager on Duty (MOD) assuring safety, sales, production, programs and services, and other standards are maintained. This position will also partner with other members of the Retail Administration team, People Resources, and Workforce Development to ensure that all activities performed are in a manner consistent with the mission, vision, and values of Goodwill of the Finger Lakes. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Serves as Leader on Duty as dictated by schedule:, • Ensures safe work practices are followed at all times, • Ensures the facility is neat, clean, and organized to prevent injury or accident., • Ensures employees, volunteers, community service personnel, and others use safe work methods at all times., • Assists with supervising the daily cash drawer balances and deposits of store receipts:, • Assists with monitoring the operation of the cash registers to ensure the proper accountability of all transactions., • Balances cash and deposits store receipts as required., • Assists with the transmission of all required reports., • Assists with the supervision of all employees., • Reviews customer concerns and resolves appropriately., • Maintains interior and exterior of store in a neat, clean, organized manner (including but not limited to vacuuming, dusting, cleaning bathrooms, mopping floor)., • Performs the duties of various team member roles as staffing needs arise., • Asks every customer for a Round-up donation, maintains a minimum of 25% round up average., • Maintains proper security of all company assets., • Assists the Store Leader with store employee meetings as necessary for employees in assigned operation., • Assists in ensuring that store equipment is maintained in proper working order. Promptly notifies Maintenance Supervisor of defects, or IT Manager of problems relating to the computer systems and e-mail., • Contributes to the effectiveness of the store by performing all other tasks as assigned, which include coverage of the donation door, cashiering, and production of donated merchandise. SUPERVISORY RESPONSIBILITIES: Indirectly supervises store team members, volunteers, and community service personnel in assigned operation in accordance with the organization's policies and applicable laws. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. This position is required to work nights, weekends, and holidays. EDUCATION AND/OR EXPERIENCE: Associates degree preferred. Minimum of one year retail experience with at least six months supervisory experience. Or equivalent combination of education and experience. COMPUTER SKILLS: Must be proficient in Microsoft Word, Excel, and Outlook. LANGUAGE SKILLS: • Ability to read and understand documents such as time cards and policy manuals., • Ability to write routine reports., • Ability to speak effectively and communicate clearly to other employees and customers. MATHEMATICAL SKILLS: Able to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, and sales volume. Able to apply basic financial and budgeting concepts. WORK ENVIRONMENT: While performing the duties of this job the employee is usually working in a comfortable and store environment. At times this employee may be exposed to the outside environment when receiving donations. The employee will also be exposed to the donation processing area which is a factory-like environment. SCHEDULING REQUIREMENTS: Must have open and flexible availability, and be willing to work evenings and weekends. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must be able to travel for work-related programs and meetings. The employee is required to move stock, climb or balance on step‑ladders; stoop, kneel, crouch or crawl while setting up displays. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. The employee may bend and turn to evaluate donations moving from a bin to a processing table, as needed. The employee may also on occasion need to tag merchandise which requires use of at least one hand. Physical Demands- Customer Service Team Leader Frequency Never Almost Never Occasionally Almost always Always Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead

Job Description • We are hiring immediately for a part time FOOD SERVICE WORKER position., • Location: Helio Elements Syracuse - 4567 Crossroads Park Drive, Liverpool, NY 13088 Note: online applications accepted only., • Schedule: Part time schedule. Days and hours may vary. Weekend and holiday work required. More details upon interview., • Requirement: At least 1 year of food service experience required. *Internal Employee Referral Bonus Available • Pay Range: $18.00 per hour to $20.00 per hour We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1581723. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares, presents and serves food as needed. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables., • Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards., • Stores food in designated areas following wrapping, dating, food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Distributes supplies, utensils and portable equipment., • Utilizes approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Resolves customer concerns and relays relevant information to supervisor., • Ensures compliance with company service standards and inventory and cash control procedures., • Assures compliance with all sanitation and safety requirements., • Performs other duties as assigned. Associates at Eurest are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyEurest.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Req ID: 1581723 [[req_classification]]

Job Description Overview Are you looking for a career with premium benefits and the potential for growth? At Trinity Services Group, we have created something special, a better place to work and grow. Many employees start just expecting a paycheck but end up with a rewarding career. We provide exceptional training and a clear career path. We also offer a $250 bonus for completing our Rookie’s Fast Track Program within the first 60 days! We now also offer DailyPay providing you immediate access to earned wages. Work Today, Get Paid Today! We are proud to be a military and veteran friendly employer. BENEFITS: We care about our employees and offer benefits that support your health, finances, and career growth. ✅ Medical, Dental & Vision Insurance ✅ DailyPay® - Work Today, Get Paid Today ✅ 401(k) Retirement Plan with Company Match ✅ Paid Time Off (PTO) ✅ Tuition Reimbursement ✅ Paid Training ✅ Career Advancement Opportunities ✅ Life Insurance & AD&D Coverage ✅ Voluntary Benefits including Short-Term Disability, Long-Term Disability, Critical Illness, Accident Coverage, and more. Responsibilities This position is working inside a jail/correctional facility at the Onondaga County Justice Center. The Lead Food Service Supervisor performs a variety of kitchen responsibilities as assigned and/or instructs inmate labor in preparation and serving of correctional facility meals following departmental work production standards, standardized recipes, and work instructions. You will report to a Food Service Director. You will work onsite inside of a jail/correctional facility. Essential Functions/Main Responsibilities: Independently prepare, assists, or instructs inmate labor/team members in the preparation of a variety of food items following departmental work production standards, standardized recipes, and Institution work instructions. You will handle production paperwork and/or sanitation paperwork essential to comply with facility procedures. Ensure you complete the cleaning and maintenance of all food service equipment and work areas; confirm that you follow proper safety and sanitation practices. Follow prescribed institution requirements in all preparation, oversight, and serving of correctional facility meals Follow assigned institution housekeeping and safety practices as instructed. Stores food and supplies following instructions. Perform in high-volume food production facilities preparing food for large groups. Other responsibilities as determined by our needs. Qualifications • High School Diploma or GED and/or equivalent experience. Must be at least 21 years of age., • 1 year or more of experience working in a food service role., • We prefer prior institutional food service or restaurant experience., • Ability to lift up to 50 lb., • Ability to stand for long periods of time.

Boviteq USA in Syracuse, NY is seeking a Laboratory Technician in Embryology to support IVF, embryo production, and related lab processes. Reporting to the Laboratory Supervisor, you will perform routine and specialized procedures with high accuracy in accordance with protocols and regulatory requir

Reporting to the Laboratory Supervisor, plays a key role in supporting Boviteq USA’s advanced reproductive technologies, including IVF, embryo production, and related laboratory processes. Laboratory technician, Embryology (Agriculture). We are currently looking for a Laboratory Technician in Syra

Operations Supervisor- Night Shift. The Night Shift Operations Supervisor at our Syracuse Nitrite production plant directs evening operations personnel.

Job DescriptionTruck Driver: • Responsible for the security and safe operation of the vehicle and other assigned equipment., • Promptly report, to immediate supervisor, all accidents involving truck, personal injury, or property damage and complete all necessary paperwork., • Perform daily walk around inspection of vehicle, checking air, water, oil and other items to maintain equipment in good operating condition., • Report any problems immediately to the supervisor., • Ensure truck cab and box are clean and personal items are removed daily., • Plan daily routing based on pick-ups assigned and make all calls scheduled, including boxes., • Responsible for developing of assigned route, including bagging or carding on both sides and across the street of each pick-up, as instructed., • You are a personal representative of The Salvation Army., • You are therefore to ensure that all customers are treated courteously, donations are accepted or refused appropriately, and the “Manual for Production Assistants” is strictly followed., • Any problem in pickups should be reported immediately to the dispatcher., • Required to maintain a professional appearance in compliance with company dress code., • Maintain complete and accurate records, i.e., delivery manifests, trip log, Green Sheet, etc., • Strict adherence to communication procedure and 10 codes., • Responsible for loading and unloading of truck assigned and others as requested., • Take proper care to secure and safely handle goods and materials during loading and unloading. Blankets, ropes, etc., are to be used to:, • Avoid excessive movement of material during transit., • Avoid breakage, scratching, or other damage., • Make optimum use of available space., • Provide assistance to Thrift Store personnel when delivering items to ensure proper placement and location within the store (i.e. hampers to processing area, furniture placed properly on sales floor, removal of trash, etc.)., • Instruct and supervise Truck Helper. Keep in mind that the Truck Helper is in a rehabilitation program and that good habits are taught by example as well as instruction., • This position will support the work therapy program component of The Salvation Army Adult Rehabilitation Centers by providing to beneficiaries; an example of professional conduct, work habits, and supervision (as directed by Supervisor)., • Other duties as may be assigned by immediate supervisor and/or Administrator.

Job Description We’re seeking a hands-on, detail-oriented and dependable Manufacturing Associate – Clean/Test to join our growing manufacturing team. Do you have a strong mechanical aptitude and an interest in assembling, fabricating and testing complex technical equipment? Are you comfortable working with mechanical drawings, blueprints, precision measuring tools and technical documentation? Are you interested in high-tech and working in a cutting-edge industry? If yes, please keep reading! As a Manufacturing Associate – Clean/Test, you will be responsible for assembling and fabricating Cryocooler products, troubleshooting equipment, performing assigned tests and accurately documenting results. You will work independently and as part of a team to ensure products meet established performance specifications and quality standards. This role requires strong attention to detail, the ability to interpret technical documentation and a commitment to following plant safety requirements and Standard Operating Procedures (SOPs). Your tasks as a Manufacturing Associate – Clean/Test will include assembling, fabricating and replacing components as required, maintaining and troubleshooting equipment, and performing testing according to production schedules, work orders, test manuals, performance specifications, wiring diagrams and schematics. You will ensure work orders reflect the latest revisions before beginning testing, perform assigned tests accurately and efficiently, and keep your supervisor or Manager informed of progress, challenges and other relevant updates. You will also contribute to maintaining a safe, organized and productive manufacturing environment. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay Range: First Shift: $19.25-27.50/hr. (DOE) Your main responsibilities would be Assemble, fabricate and replace components as required. Maintain and troubleshoot equipment to ensure optimal performance. Review production schedules, work orders, test manuals, performance specifications, wiring diagrams and schematics to determine appropriate testing procedures and equipment. Verify that work orders reflect the latest revisions before beginning testing procedures. Perform assigned tests accurately and efficiently. Communicate progress, challenges and relevant updates to the Supervisor or Manager in a timely manner. Follow all plant safety requirements, Standard Operating Procedures (SOPs) and established work instructions. Maintain a safe, clean and organized work environment. Perform additional duties as assigned. What we expect from you High school diploma/GED or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and training documents. Ability to read and understand mechanical drawings and blueprints. Ability to use and understand precision measuring tools and devices. Basic understanding of mechanical principles. Basic math skills, including adding, subtracting, multiplying, dividing, and converting fractions and decimals. Ability to distinguish colors, including black, yellow, red, green and blue. Strong attention to detail and commitment to performing work accurately. Ability to follow established procedures and safety requirements. Ability to work independently as well as collaboratively as part of a team. We also appreciate Previous manufacturing experience. Technical or mechanical experience or aptitude. Experience working with mechanical equipment, tools or testing equipment. Experience working with technical documentation, drawings or schematics. A willingness and desire to learn new technical skills and processes. Physical Demands While performing the duties of this job, the employee is frequently required to stand, reach with arms and hands, and use hand and finger dexterity. The employee is occasionally required to walk, stoop, kneel, crouch or crawl, and talk and hear. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close, distance and peripheral vision, depth perception, and the ability to adjust focus. Work Environment This position operates in a manufacturing environment and interacts primarily with internal customers in a professional, courteous and cooperative manner. Mandatory PPE must be worn as required. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, electrical shock and vibration. The noise level in the work environment is usually moderately loud. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job Description 107 City Crossroads Drive, Syracuse, New York 13210 The Wolak Group is currently hiring for a Donut Production Associate to join our network! We are a locally owned, established Dunkin’ Franchise with 90+ locations and growing. Nothing makes us happier than providing our guests with America’s favorite coffee, refreshing beverages, tasty baked goods and snacks. Our customers are the reason we are in business, so we strive every day to deliver exceptional service to our guests. We’ll let you in on a little secret though...while everyone knows that America Runs on Dunkin’, at The Wolak Group, we know that Dunkin’ runs on our incredible team members. Ready to come run with us? Here’s what’s in it for you: To keep our amazing team running, employees at our restaurants enjoy a bunch of perks: • Competitive Pay ranging from $17.00-24.00/hr. Compensation is based on skills/prior experience., • Tuition Reimbursement through Southern NH University, • Career development and growth, • Comprehensive health, dental, and vision coverage*, • 401K Savings to help you save for the future*, • Paid Time Off (PTO) *Eligibility requirements Here’s who we’re looking for: • Someone who comes to work with a positive attitude ready to produce high-quality baked goods for delivery to Dunkin’ Restaurants., • A team player who excels in a fun, fast-paced environment while following brand standards as well as safety/sanitation standards, • Someone with a great attitude who has a desire to learn and is able take feedback from their supervisor and run with it Click here to view the full job descriptions! You are applying for work at The Wolak Group, a franchisee of Dunkin’ Donuts, not Dunkin’ Brands, Inc. or any of its affiliates. Many Dunkin' restaurants are owned and operated by an independent franchisee. Each Dunkin' franchisee is an independent employer and thus solely responsible for hiring decisions and all other employment-related matters for the franchisee’s restaurant(s). The terms “Company,” “Dunkin',” “we,” “our,” or “us” refer to the specific entity (corporate or franchise) that owns and operates the Dunkin' restaurant to which you are applying. Nothing on this site should be construed as Dunkin' being involved in or having control over a franchise employee’s terms and conditions of employment. Any employment-related questions regarding a franchise restaurant should be directed to the franchisee. We use eVerify to confirm U.S. Employment eligibility.

Job Description Seal & Design, Inc. is a family owned company founded in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. We are looking for a Production Associate to join our team, on first shift! • Monday - Friday: 6am - 2:30pm, • Pay Range: $21.00-$25.50 Overview: Fabricate orders according to job specifications with an eye towards process improvement, quality and meeting or exceeding job productivity and efficiency standards. Responsibilities: • Operate machinery safely according to company policies, • Perform secondary inspection and advise supervisor of shortfalls in quality and temporarily suspends sorting until issue is resolved, • Cross train and assist in other departments as required Requirements To be seriously considered for this role, please have the following regarding: Experience: 1 year of manufacturing experience Education: HS Diploma Skills: Proficiency working in a computer supported environment with business software, basic math and language skills, strong attention to detail Characteristics: Results driven, ability to take initiative and challenge the status quo, ability to meet deadlines and work in a team atmosphere to deliver results Benefits • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job Description Seal & Design, Inc. is a family owned company founded in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. We are looking for a Production Associate to join our team, on first shift! • Monday - Friday: 6am - 2:30pm, • Pay Range: $22.00 - $26.00 Overview: Fabricate orders according to job specifications with an eye towards process improvement, quality and meeting or exceeding job productivity and efficiency standards. Responsibilities: • Operate machinery safely according to company policies, • Perform secondary inspection and advise supervisor of shortfalls in quality and temporarily suspends sorting until issue is resolved, • Cross train and assist in other departments as required Requirements To be seriously considered for this role, please have the following regarding: Experience: 1 year of manufacturing experience Education: HS Diploma Skills: Proficiency working in a computer supported environment with business software, basic math and language skills, strong attention to detail Characteristics: Results driven, ability to take initiative and challenge the status quo, ability to meet deadlines and work in a team atmosphere to deliver results Benefits • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance

On our team, everyone plays a critical role in creating confidence and excitement by personally equipping all athletes to achieve their dreams.We are committed to creating an inclusive and diverse workforce, reflecting the communities we serve.If you are ready to make a difference as part of the wor

Cintas Corporation - - Responsibilities: Operate conveyor belt moving products through plant; Clean and maintain work area; Meet quantity and quality standards.