Trabajos quality control engineer en Columbus, OhioCrear alertas

Job Title: Construction - QA/QC Program Engineer Location: New Albany, Ohio (Onsite) Pay Rate: $75-$85/hr Job Description: This role focuses on developing, monitoring, and improving quality assurance and control programs for data center construction projects. It requires strong cross-functional coordination, technical expertise across multiple disciplines, and hands-on experience with QA/QC processes, documentation, and tools. The candidate should be adept at training, auditing, issue resolution, and leading quality initiatives in complex, mission-critical environments.; Qualification: Strong mechanical and electrical QA knowledge, People focused with strong interpersonal skills. The ability to work well with XFN partners. QA/QC commissioning skills Experience with CSLA disciplines Some experience with vendor management. Experience on design-build side of projects Responsibilities: Develop and monitor quality program metrics to evaluate projects performance. Analyze metrics to understand the root cause of any disconcerting trends and then work with the applicable parties to correct those items. Assist with development of on-site partner construction QA and QC team. Assist with development of QA/QC processes and standards to enable efficiency and effectiveness and assist with cross functional communications. Interface between design, construction, and facility operations as well as general contractor(s). Provide training to personnel regarding awareness and quality procedures and specific responsibilities in the QA/QC process. Coordinate quality issues between design, construction and facility operations teams. Audit QA/QC activities of staff and subcontractors as often as necessary to assess conformance with the QA/QC procedures. Examine all submittals (in particular, mechanical, engineering and plumbing (MEP) submittals) for quality assurance and provide comments to ensure all documents are compliant. Perform quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Develop, review and approve, if required, levels one (1), two (2), three (3), four (4), and five (5) related to product and process quality such as construction quality procedures (“CQPs”) and checklists, technical deliverables, and test procedures and plans. Recommend and verify effective implementation of corrective and preventive actions for project non conformances and quality issues, in coordination with project and quality management, design, engineering, construction and other functional disciplines. Review commissioning agent level four (4) and five (5) commissioning scripts and provide feedback. Assist construction manager in review of turnover documentation package for completeness and accuracy. Assist construction manager in review of level three (3), four (4), and five (5) energization, start-up, and commissioning schedules and help ensure compliance to it. Help drive closure to open issues in BIM360 and escalate any outstanding open items not getting closed out in a timely manner. Attend factory witness tests (“FWTs”) as required for owner furnished contractor installed (“OFCI”) and contractor furnished contractor installed (“CFCI”) equipment and systems. Provide an onsite visual inspection and/or observation for construction quality control of OFCI and CFCI equipment and systems. This site acceptance inspection will be documented in BIM360. Assist in confirming that Level two (2) and level three (3) testing documentation is properly completed and retained. Provide assistance in reviewing installed labeling, signage and tagging. Assist in development of project specific QA/QC dashboards, equipment tracking matrices, and semi-annual QA/QC deep dive / presentations. Attend required construction meetings such as the weekly project and monthly global QA/QC meeting, MEP/owner architect contractor (OAC) weekly meetings, and daily start-up and commissioning meetings. Minimum Qualifications 5+ years’ experience in quality control & quality assurance (QA/QC) programs for data centers or mission critical construction projects. Experience with Design-Build and Design-Bid-Build construction programs. Experience in civil/structural, building envelope, mechanical, electrical, and I&C disciplines. Experience leading QA/QC and Cx programs. Experience in contractor, consultant, and vendor management. Experience in mission critical power and cooling infrastructure or other critical systems, and the ability to apply that experience to current data center challenges. Prior experience with construction quality tools

Job Description Forge Your Future with Us At Forge Biologics, we believe in turning bold ideas into life-changing realities. Our mission is simple yet powerful: to enable access to life-changing gene therapies and help bring them from ideas into reality. We partner with scientists, physicians, biotech and pharma innovators, and patient communities — all united by one goal: improving lives. If you're driven by purpose and excited to make a tangible impact, this is where your journey begins. Our team works out of The Hearth, a state-of-the-art, 200,000-square-foot cGMP facility in Columbus, Ohio. Here, you won't just watch innovation happen — you'll be part of it. Whether you're scaling AAV manufacturing, collaborating on cutting-edge therapies, or supporting complex technical projects, you'll play a key role in bringing hope to patients with genetic diseases. What sets Forge apart is our culture of H.O.P.E. We are hardworking, showing up each day with determination and grit. We are open, creating a space where ideas flow freely and every voice is valued. We are purpose-driven, with every task directly tied to changing lives. And we are engaged, energized by the challenges we face and the milestones we achieve together. At Forge, your growth matters. We're committed to helping you expand your skills, take on new challenges, and develop your career through mentorship, hands-on learning, and opportunities for advancement. Our people are our greatest investment, and we're proud to see team members grow with us. If you're ready to use your talent to help deliver hope to patients around the world, join us — and be part of something bigger than yourself. About the Role: We are currently looking for a highly skilled and experienced Senior Validation Engineer I to join the Forge Biologics team. As a Sr. Validation Engineer I, you will be responsible for the design, implementation, and execution of process validation activities to ensure the compliance, quality, and efficacy of our manufacturing processes. You will work closely with cross-functional teams to develop and execute validation strategies, provide technical expertise in process validation and aseptic process simulation to ensure adherence to regulatory compliance and industry best practices. Responsibilities: • Develop, Implement, and Maintain the Process Performance Qualification (PPQ) and Continued Process Validation (CPV) programs, including development of related procedures, templates, work instructions, and associated documentation., • Develop and lead execution of Process Performance Qualification (PPQ) protocols, for GMP manufacturing processes., • Maintain and provide continuous improvement of the Aseptic Process Simulation (APS) (Media Fill) program., • Develop and lead execution of new aseptic (APS) protocols, for aseptic manufacturing processes., • Collaborate with cross-functional teams, including Process & Analytical Development, GMP Manufacturing, Operations , Manufacturing Science and Technology (MSAT), Quality Management, Quality Control, and Regulatory Affairs to ensure effective planning, execution, and completion of validation activities., • Define sampling plans and, test methods, and acceptance criteria for validation deliverables, ensuring alignment with regulatory guidelines (FDA, EMA, etc.), industry best practices, and internal procedures., • Lead and participate in investigations related to validation deviations, implementing appropriate corrective and preventive actions (CAPAs) as needed., • Assess changes to proposed process changes and develop validation plans, as necessary., • Conduct hands-on validation activities, such as protocol generation, execution, data analysis, and report writing., • Collaborate on risk management, process development studies, technology transfer, and other process validation related activities., • Stay abreast of industry trends, regulatory updates, and technological advancements related to process validation in the cell and gene therapy field and propose continuous improvement initiatives to enhance validation processes and practices., • Provide technical guidance and mentorship to junior team members, fostering a culture of knowledge sharing and professional development., • Bachelor's or degree in Engineering, Biotechnology, Pharmaceutical Sciences, or a related field (or equivalent experience)., • Knowledge of validation principles across multiple disciplines, which may include process validation, aseptic process simulation, equipment qualification, and/or computer systems., • Significant experience in process validation within the pharmaceutical or biotechnology industry., • Strong understanding of Quality by Design (QbD) principles with proficiency in risk assessment methodologies (e.g., PFMEA) and statistical analysis tools for validation data (e.g., Minitab, JMP)., • Strong understanding of cGMPs (current Good Manufacturing Practices)., • Excellent analytical, problem-solving, and decision-making skills, with meticulous attention to detail., • Effective communication and collaboration abilities, with the capacity to work cross-functionally and influence stakeholders at various levels of the organization., • Strong project management skills, with the ability to prioritize and manage multiple validation projects concurrently., • Experience in the application of commercial cGMPs., • Experience with aseptic processing and clean room standards., • Process Validation experience in the Cell & Gene Therapy Industry., • Experience in qualifying a wide range of equipment, including Biological Safety Cabinets (BSCs), Controlled Temperature Units (CTUs), bioreactors, incubators, chromatography systems, centrifuges, and analytical instruments., • Experience in the application of pre-clinical and clinical cGMPs. Work Environment and Physical Demands This position works in both a laboratory environment and typical office environment where the physical work demands will vary depending on the specific tasks and duties required of the job. The employee will be stationary (standing/sitting) for extended periods of time. Employees regularly wear personal protective equipment based on the task being performed. Must be able to work in a confined space, such as a clean room or laboratory environment. Ability to identify small details within the field of vision, distinguish between different colors, and accurately identify objects within a specific area. Must be able to lift heavy objects up to 50 lbs. Forge Biologics is an equal opportunity employer dedicated to building an inclusive and diverse workforce. Forge Biologics, provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We've Got You Covered: At Forge Biologics, we believe our people deserve to be taken care of – in and out of the workplace. We've built a comprehensive compensation and benefits package designed to help you thrive, grow, and feel valued every step of the way: Health from day one • A competitive paid time off plan – because rest fuels innovation., • Annual bonus opportunities for all full-time team members., • 401(k) with company match to help you plan for the future., • Onsite fitness facility at The Hearth., • Mental health counseling and financial planning services through our Employee Assistance Program., • Ongoing professional development resources, training, and mentorship programs to help you build your care and grow within Forge.

Job Description Forge Your Future with Us: At Forge Biologics, we believe in turning bold ideas into life-changing realities. Our mission is simple yet powerful: to enable access to life-changing gene therapies and help bring them from ideas into reality. We partner with scientists, physicians, biotech and pharma innovators, and patient communities — all united by one goal: improving lives. If you're driven by purpose and excited to make a tangible impact, this is where your journey begins. Our team works out of The Hearth, a state-of-the-art, 200,000-square-foot cGMP facility in Columbus, Ohio. Here, you won't just watch innovation happen — you'll be part of it. Whether you're scaling AAV manufacturing, collaborating on cutting-edge therapies, or supporting complex technical projects, you'll play a key role in bringing hope to patients with genetic diseases. What sets Forge apart is our culture of H.O.P.E. We are hardworking, showing up each day with determination and grit. We are open, creating a space where ideas flow freely and every voice is valued. We are purpose-driven, with every task directly tied to changing lives. And we are engaged, energized by the challenges we face and the milestones we achieve together. At Forge, your growth matters. We're committed to helping you expand your skills, take on new challenges, and develop your career through mentorship, hands-on learning, and opportunities for advancement. Our people are our greatest investment, and we're proud to see team members grow with us. If you're ready to use your talent to help deliver hope to patients around the world, join us — and be part of something bigger than yourself. About The Role: The Facilities & Utilities Engineer is responsible for leading aspects of the facility and equipment performance, reliability, and compliance for Chilled Water, Hot Water, Reverse Osmosis (RO), Purified Water systems and cleanroom / building infrastructure. This role involves acting as a subject matter expert in troubleshooting, monitoring, and optimizing critical assets to drive quality and safety compliance, maximize availability, and improve asset health. The Facilities & Utilities Engineer will also lead or play a critical part in the execution of small capital projects related to utility and facility expansion. Responsibilities: Utility Systems • Collaborates with Facilities and Engineering to build preventive and predictive maintenance procedures and maintains P&IDs and other associated drawings for the following systems (participating in periodic walkdown of the systems): Hot Water, Chilled Water, Reverse Osmosis (RO), WFI (Water for Injection), CS (Clean Steam), Compressed Gas systems maintenance., • Owns performance of one or more utility systems., • Develops and maintains asset health metrics on utility systems., • Acts as a SME in design the latest maintenance technologies for building infrastructure items including cleanroom architecture (walls, ceilings and resinous flooring design), cleanroom door control system and functionality, roofing system, facility doors/roll-up doors, lighting, general exterior site access routes., • Leads / owns small utility and infrastructure projects including scoping, scheduling, budgeting, and execution., • Provides technical expertise in risk assessments for the design and selection of utility systems and building infrastructure., • Leads closure of equipment and facility Deviations, CAPAs and Change Controls, SOPs, and audits, • Participates in FMEAs, PHAs and PSSRs (Pre-startup Safety Reviews), • Executes utility and building infrastructure maintenance as required., • Owns various aspects of work order review and closure., • Collaborates on shutdown management of activities (master schedules for shutdowns including planned, corrective and project-based activities), • Provides SME support for the contractor management program and evaluate improvements with externally performed preventive maintenance (documentation and practices), • Works closely with Maintenance, Plant & Reliability Engineering & Project Engineering on the hand-off of newly designed and installed systems and facilities., • Support new projects by providing guidance on asset standardization and overall asset reliability expectations., • Maintains collaborative relationships with internal and external stakeholders to drive the business towards achieving company objectives., • Develops tools to support consistent execution., • 5+ years of experience in utilities, facilities, or building infrastructure engineering, preferably within a regulated environment (pharmaceutical, biotechnology, CDMO, or FDA)., • Bachelor's degree in an engineering discipline, preferably Mechanical, Civil, Chemical, or Electrical Engineering (or equivalent professional experience)., • Hands-on experience with utility systems such as WFI, Clean Steam, RO, HVAC, compressed gases, and building automation systems., • Strong knowledge of preventive/predictive maintenance strategies, asset reliability practices, and risk assessment tools (FMEA, PHA, PSSR)., • Strong problem-solving, troubleshooting, and decision-making abilities., • Ability to evaluate and implement new technologies for cleanrooms, utilities and facility design., • Experience with electronic Quality Management Systems (e.g., Veeva) and Computerized Maintenance Management Systems (e.g., BMRAM)., • General understanding of process control and computerized systems., • Preferred: Experience in engineering design, CAD experience, forklift trained, and engineering troubleshooting in a regulated environment (ISO, FDA). Work Environment and Physical Demands • May be required to lift up to 50 pounds of materials or equipment., • Requirement to gown into Classified Areas of the facility (ISO 7 and 8 sterile gowning), • The ability to move safely over uneven terrain or in confined spaces, • The ability to safely climb ladders while carrying 40 pounds We've Got You Covered: At Forge Biologics, we believe our people deserve to be taken care of – in and out of the workplace. We've built a comprehensive compensation and benefits package designed to help you thrive, grow, and feel valued every step of the way: Health from day one • A competitive paid time off plan – because rest fuels innovation., • Annual bonus opportunities for all full-time team members., • 401(k) with company match to help you plan for the future., • Onsite fitness facility at The Hearth., • Mental health counseling and financial planning services through our Employee Assistance Program., • Ongoing professional development resources, training, and mentorship programs to help you build your care and grow within Forge.

Job Description Ironwear, a premier name in the Personal Protective Equipment (PPE) industry, has been dedicated to improving safety for more than three decades. We manufacture, develop, and re-engineer high-quality PPE for various industrial markets globally. In light of recent events, we are also committed to supporting the medical community by enhancing our Infection Control and Medical Protection product lines. We are seeking a dynamic Regional Account Manager to bolster our sales team. The ideal candidate will be responsible for driving sales growth and maintaining strong relationships with key customers within the assigned region. This role requires strategic planning, market insight, and a commitment to understanding and addressing our clients' needs. The Regional Account Manager will play a crucial role in promoting our extensive range of products, ensuring customer satisfaction, and achieving regional sales objectives. Key Responsibilities • Develop and execute effective sales strategies tailored to meet the diverse needs of clients in your region., • Manage and nurture relationships with existing clients while identifying opportunities for new business development., • Analyze market trends and competitor strategies to inform sales tactics and product offerings., • Regularly meet with clients to assess their needs and ensure the effective delivery of solutions., • Collaborate with the marketing team to align promotional efforts with sales objectives., • Track sales performance and prepare comprehensive reports for senior management., • Minimum of 1-2 years of experience in sales or account management, ideally in the PPE or safety equipment field, • Demonstrated success in meeting and exceeding sales targets, • Ability to cultivate and maintain strong client relationships, • Excellent communication and interpersonal skills, • Proficiency in CRM software and sales data analysis, • Strong organizational skills with the ability to manage multiple accounts and priorities, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Paid Time Off (Vacation, Sick & Public Holidays)

Job Description ENVIRONMENTAL, HEALTH AND SAFETY ENGINEER PAY: $80,000 - $90,000 VISA SPONSORSHIP: NO RELOCATION ASSISTANCE: NO REMOTE: NO Do you want to push the boundaries of your profession and develop your excellence in an open, and collaborative way? If so, our client invites you to bring your EH & S regulatory compliance knowledge and experience and join our team as a Senior Health & Safety Engineer. ABOUT US: Our client is a full-service, tier one supplier to the automotive industry, specializing in the design and production of plastic components equipment, accessories, and electronic components. Their Ohio facility houses mold design, construction, production engineering, and dedicated associates in our Quality, Assembly, Sales, and Customer Service departments. HOW YOU WILL OUTSHINE: · Demonstrating solid organization skills · Being attentive to every detail · Exercising critical thinking · Solving problems · Working well independently and with a team · Demonstrated analytical skills · Excellent communication skills, written, oral, and interpersonal. WHAT YOU WILL BE DOING: This role is responsible for designing, developing, tactically deploying and effectively executing programs and policies to support the strategy and vision to achieve World Class EHS Performance. This role will actively participate in the areas of planning, EHS Governance, auditing, management systems, best practice sharing, compliance initiatives by: · Ensuring compliance with all applicable federal, state, and local regulations and company policies (including Hazard Communication, Lock-Out/Tag-Out, Machine Guarding, Hearing Conservation, Respiratory Protection, Electrical Safety, Arc Flash, Robot Safety, Cranes, ISO 14001, etc.) · Preparing and submitting all compliance reports for Federal, State and Local entities, customers, and parent company · Establishing goals, objectives, metrics and scorecards to assure the EHS function is effective · Evaluating the effectiveness of the Environmental, Health and Safety Programs and implementing best practices · Conducting injury, illness, and near miss investigations using root cause analysis to develop corrective action plans · Ensuring permit compliance (air & water) · Administering associate personal protective equipment programs including safety eyeglasses and safety shoes · Leading hazardous waste management and disposal activities · Developing and implementing a facility-wide ergonomics program · Leading and implementing Carbon Neutrality projects, data collection activities and reporting of Sustainability efforts · Coordinating SDS Program for materials used, received and/or processed at the facility. · Developing, implementing and testing emergency action plans and procedures, including fire evacuation, severe weather, chemical spills, etc. · Assessing potential environmental risks and provide mitigation plans to reduce incidents · Developing pollution and waste control programs · Evaluating hazards for environment, health and safety risks and ensuring the development of Job Hazard Analyses for defined tasks. · Managing Workers’ Compensation claims management (in coordination with the company contracted TPA, the Ohio BWC and our legal counsel). · Ensuring contractor personnel working at this location is working in compliance with OSHA Regulations and Company requirements · Conducting EHS Meetings, audits, and inspections to ensure compliance, evaluate performance, identify corrective action opportunities · Reviewing and updating SPCC plans as needed · Developing and conducting effective EHS training · Performing Risk Assessments with all departments to determine the potential hazards, environmental impacts, regulatory requirements, and conformance with recognized industry standards (ANSI, NFPA, ACGIH, RIA, etc.) of all new and changing processes and projects (capital projects and others) · Conducting field inspections, including such items as stormwater, spill prevention, and other environmental compliances · Maintaining accurate EHS record keeping and documentation control · Conducting timely investigations of all environmental, health and safety incidents to determine root cause and implement corrective action plans. WORKING CONDITIONS: • Lifting max 40lbs (0.5) hours per day, • General Office Environment (4) hours per day, • Manufacturing Environment (2.5) hours per day HAZARDS: • Exposure to Hazardous Materials (0.5) hours per day HOW YOU WILL QUALIFY: • Bachelor’s Degree in Occupational Health and Safety Management or Environmental Management, or related field, • Three to five years’ work experience required, with two years required in a manufacturing environment, • Thorough knowledge of workers’ compensation regulations, • Extensive knowledge of OSHA, NFPA, EPA and other governmental regulations and laws including OSHA 300 Logs and requirements set by Insurance Carriers, • Experience with multi-location plants and 24/7 operation, • Comprehensive understanding of EHS regulations and requirements in MA and RI, • Strong focus on behavioral safety and employee engagement, • Ability to influence up and down in an organization, • Experience with managing an EHS management system including ISO 14001, OHSAS 18001 (ISO 45001), • Experience with OSHA VPP, • OSHA General Industry 10- or 30-hour training course, • Forklift training experience These qualifications are preferred but not necessary for you to get started: HOW YOU WILL BE REWARDED: · Medical, Dental, Vision and Life Insurance • 401K Retirement Savings with Company Match, • Tuition Reimbursement and more!

Job Description Company Overview: Resource International, Inc. (Rii) is a multi-disciplined professional engineering consulting firm specializing in Construction Management, Information Technology and Planning and Design of building and transportation on infrastructure projects valued in excess of $1 billion annually. Today, the Columbus-based corporate headquarters and its branch offices throughout the Midwest employ more than 200 engineers and professionals and list an impressive roster of projects for local, state and federal government and private development for infrastructure and facilities. If you want to join a team of dedicated professionals who are among the best in their field, in a diverse work environment, then please explore Resource International’s career possibilities. To learn more about our firm, please visit our Web site at ww.resourceinternational.com. Rii is an Equal Opportunity Affirmative Action Employer. Position & Location: Rii is seeking a Bridge Engineer, PE to join our Transportation Design Division. Rii maintains design offices in Columbus and Cincinnati, Ohio as well as Indianapolis, Indiana. Responsibilities: • Ability to lead design and tasks for structural efforts to support public and private infrastructure and development, including unique and non-standard projects., • Participate in the development of contract plans, the preparation of engineer's estimates and construction specifications and performing field support services, • Develop reports/studies, specifications, plans, and designs for projects of varying magnitude and for multiple clients. This involves exploration of subject area, definition of scope and selection of problems for investigation, and development of novel concepts and approaches., • Must be able to work with consultation but limited direction/supervision., • Provides estimations of costs, personnel and materials needed and assists in establishing completion dates and preparing proposals. May assist with presentations to clients., • Reviews project designs and plans from junior engineers for accuracy and completeness, including delegation of tasks as appropriate., • Professional Engineer (P.E) licensed in Ohio., • Bachelor’s Degree (or advanced degree, MS) in Civil Engineering, with a concentration in Structural Engineering preferred., • Design experience with reinforced concrete, prestressed concrete, straight and curved steel beams required., • Prior work experience in the Civil Engineering Industry is required, including familiarity with CAD and design software, including: OpenRoads and OpenBridge Designer and/or AutoCAD/Civil3D, Merlin Dash, MIDAS, AASHTO BrR, Leap Bridge, PyWall, L-Pile., • Prior structural work experience with public transportation projects (i.e., ODOT, Municipal, and County) including familiarity with steel and reinforced concrete designs conforming to ODOT and AASHTO Specifications is required., • Experience with railroad structures and AREMA Specifications a plus., • Bridge inspection experience is also a plus., • Experience acting as technical lead on project of various complexity and must be able to effectively communicate and multi-task in a team environment., • Ability to demonstrate coursework in structural engineering and relevant career experience designing bridges, culverts, retaining walls, foundations, and related structures. Recruitment Agency Statement: Resource International Inc. (Rii) does not accept solicitation from Third Party Recruiters for any position and are not responsible for any fees associated with unsolicited resumes. No emails or calls. Company DescriptionResource International, Inc. (Rii) has been operating since 1973 as a Female Business Enterprise in Columbus, Ohio. As Chief Executive Officer and Chairperson of the Board, Farah Majidzadeh built a company from the corporate headquarters that began in her basement in 1973 into a broad-based, multi-disciplined, professional Engineering Consulting firm specializing in Construction Management, Information Technology, and planning and design of buildings and infrastructure projects valued in excess of $1 billion annually. Today, the Columbus-based corporate headquarters and its branch offices throughout the Midwest and abroad employ over 160 engineers and professionals and list an impressive roster of former projects for the federal and state government, education, healthcare and sports and entertainment.Resource International, Inc. (Rii) has been operating since 1973 as a Female Business Enterprise in Columbus, Ohio. As Chief Executive Officer and Chairperson of the Board, Farah Majidzadeh built a company from the corporate headquarters that began in her basement in 1973 into a broad-based, multi-disciplined, professional Engineering Consulting firm specializing in Construction Management, Information Technology, and planning and design of buildings and infrastructure projects valued in excess of $1 billion annually. Today, the Columbus-based corporate headquarters and its branch offices throughout the Midwest and abroad employ over 160 engineers and professionals and list an impressive roster of former projects for the federal and state government, education, healthcare and sports and entertainment.

Job Description SAP IT Engineer – Senior Job Title: SAP IT Engineer – Senior Location: Columbus, OH (Hybrid – Onsite Tuesday through Thursday) Duration: 6-Month Contract-to-Hire Rate: $60 - $70/hr Salary (Conversion): $113,000 – $170,000 annually Work Authorization: Must be authorized to work in the United States now and in the future. Sponsorship is not available for this role, including but not limited to H-1B, F-1 (CPT/OPT), TN, L-1, J-1, E-2, or any other employment-based visa. On-Call: Required for major incidents Position Overview We are seeking an experienced SAP IT Engineer to serve as the service owner accountable for the overall service level of SAP. This role is responsible for leading SAP operations, reducing incident rates, ensuring audit and regulatory compliance, and driving continuous improvement across the SAP landscape. The ideal candidate brings deep SAP technical expertise across multiple modules, strong ITIL knowledge, and the ability to lead developers and collaborate with cross-functional teams in a fast-paced, outsourced IT environment. Required Qualifications • Bachelor's Degree in Computer Science, Engineering, or related discipline (or equivalent work experience), • 7+ years of experience as an SAP Engineer, • 3–5 years of hands-on SAP experience across one or more of the following modules: MM, PM, FI/CO, Basis, GRC, ABAP, • 1+ years of experience in project management, • Strong knowledge of ITIL support practices including Incident Management, Change Management, Problem Management, and Release Management, • Familiarity with ServiceNow for IT service management, • Ability to work effectively in an outsourced IT environment, • Experience with and knowledge of legacy and new computing architectures, • Experience managing technology costs, including license management, • Excellent written and verbal communication skills, • Ability to manage multiple priorities and deadlines, • SAP certification in one or more modules (MM, PM, FI/CO, Basis, GRC, or ABAP), • ITIL Foundation certification or higher, • Experience in the utilities or energy industry, • Experience with SAP S/4HANA migration or implementation, • PMP or similar project management certification SAP Service Ownership & Operations • Serve as the service owner accountable for the overall service level of SAP, • Lead other developers to reduce incident rates and improve system stability, • Review and improve the quality of changes deployed to production environments, • Work with audit teams to ensure compliance with control tests and regulatory requirements, • Manage SAP licenses to ensure compliance and drive cost reduction, • Organize and maintain comprehensive SAP documentation, • Provide recommendations for consideration in developing the Technology roadmap, • Communicate risks, issues, and dependencies to stakeholders and leadership, • Identify opportunities to improve SAP operations and support workflows, • Reduction in SAP incident rates and improved system uptime, • Successful audit outcomes and sustained compliance, • Accurate and timely reporting and documentation, • Effective license management resulting in cost optimization, • Strong collaboration with internal teams and external partners, • Contributions to the technology roadmap that align with business objectives

Job Description About Ben Hur Construction With over a century of excellence, Ben Hur Construction has been a trusted name in the construction industry since 1909. From our roots as a local steel erector, we've grown into a regional leader in steel and precast erection, fabrication, and general contracting. Our diverse project portfolio spans iconic structures and complex installations-each project a testament to our innovative approach and commitment to quality, safety, and efficiency. We believe in empowering our teams with the tools, leadership, and safe production mindset needed to deliver outstanding results while keeping people safe and engaged. If you thrive in fast-paced environments and value the power of teamwork, accountability, and leadership, we want to hear from you. Position Overview • The Project Engineer position is an entry level opening in the Eastern Division - Columbus, Ohio., • Project assignments are in the Midwest and require moderate to extensive overnight travel to project work sites in Ohio, Indiana, Kentucky, Tennessee, and West Virginia., • The work environment is on an active construction site from the professional facilities of Ben Hur's project field office., • The project engineer reports to project management and assists members of Ben Hur's site team., • Opportunities for career advancement are expected as the employee gains knowledge and experience., • The project engineer assists with maintaining the project field office oepration and organization., • Become familiar with the project plans and specifications for Ben Hur's scope of work., • Perform field observations, trouble shoot problems, assist with field measurements and data compilation, maintain project records, logs, project drawings and documents., • Assist with project status documentation, collection, and reporting of job costs., • Become familiar with the erection plans, safety plan, schedule, and quality control and inspection aspects of the project. Qualifications • Will have completed or be in the final year of an academic degree program in engineering, technology sciences, construction management or equivalent with emphasis on STEM., • Has the ability to work as part of a team with initiative-taker attributes to manage, complete, and meet expectations and responsibilities with minimal supervision., • Construction documents are the basis of the work. The ability to understand communicate with same is required as a function of the construction process., • Must have excellent verbal and written communication skills, attention to accuracy, details, and project deadlines., • Expected technology utilization tools are laptop computers and tablets loaded with Microsoft Office, scheduling and drawing software., • The employee will be provided specific safety education and training as any entry level position. At Ben Hur Construction, we believe in building more than just projects-we build careers and opportunities for those who want to lead with purpose. If you're ready to take the next step in your career and work with a company that values people and performance equally, apply today! All new hires must be able to pass a pre-employment drug screen.

Job Description U.S. Engineering Innovations has been an industry leader through constant innovation and a willingness to evolve. The construction industry changes rapidly, and we cultivate a dynamic workplace where even our newest team members can influence change and make an impact. We know that our most valuable asset is our people. Join us! PROJECT ENGINEER U.S. Engineering Innovations is national construction project execution reimagined. We drive innovation in off-site manufacturing, specialty prefabrication, preconstruction, and mechanical construction services. As a Project Engineer, you will assist the Project Manager with a variety of project related functions including planning and coordinating onsite construction activities for designated projects, to ensure that project objectives are accomplished within prescribed time frame and funding parameters. Principal Duties and Accountabilities: • Draft RFIs (Request for Information) and proposal letters., • Review submittals and specifications and assist in documentation and budget control., • Assist Project Manager in the development and nurturing of client relationships., • Estimate change orders, develop, and help monitor the project schedule., • Maintain procurement, proposal, and correspondence logs., • Facilitate quality control measures., • Perform cost coding., • Scope of work may vary, from working on one large project, to several smaller size projects., • Bachelor’s Degree in Construction Science Management, Architectural Engineering, or Mechanical Engineering preferred., • Knowledge of construction engineering technology, processes, and standards., • Team orientation and collaborative spirit., • Self-motivation: ability to drive results., • Effective communication skills., • Ability to develop and foster strong professional relationships., • Basic level of business acumen., • The range for this position has been established at $63,120 to $94,680 per year and is US Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training. U.S. Engineering Innovations is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability, or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. #IND Equal Opportunity Employer, including disabled and veterans. Powered by JazzHR NSpEDbsVAW

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team’s full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos’ engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients’ most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor’s degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. November 3, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description Leidos is seeking a Senior Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Senior Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. Engineers at this level will focus on independent execution of technical tasks using tools like PLS-CADD and PLS-POLE and will contribute to the quality control process. This will involve working with a multi-person Leidos team and supporting clients, project planning, environmental, permitting, and construction management personnel. Work Locations: Ideal candidates will be located in Michigan, Ohio, West Virginia, Maryland, Pennsylvania, & New Jersey working a hybrid schedules. Fully REMOTE positions are available for qualified candidates. Relocation assistance will be provided to those able to relocate within a commutable distance to Walled Lake, MI or Cranberry Township, PA. The Challenge: • Execute technical design and engineering tasks related to high-voltage transmission lines, ensuring compliance with all applicable codes and standards., • Prepare and review technical drawings, specifications, and calculations under the guidance of Lead Engineers or Project Managers., • Perform engineering analyses, including PLS-CADD modeling and structure loading calculations., • Contribute to the team's continuous improvement goals by learning and applying new technical tools, AI, and automation platforms., • Actively communicate and coordinate project progress with the Project Manager (PM) to ensure awareness of and adherence to project schedule and budget. (This directly incorporates your PM/Schedule change.), • Maintain strong technical proficiency in industry-standard software and Leidos design processes. Required Education & Experience: • Bachelor’s in Civil, preferred, or Mechanical Engineering with four plus (4 +) years of relevant experience in the design of electric utility transmission systems., • Experience using PLS-CADD and PLS-POLE., • Work effectively in team environment; can also work independently., • Strong interpersonal and written communication abilities, with a focus on effective collaboration across client and project teams., • Work in client office is a possibility and/or periodic travel may be required. Desired Experience: • Experience with TOWER is a plus, • EIT or PE certification is desirable, • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. February 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote #Featuredjob

Description Leidos is seeking a Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. Engineers at this level will focus on independent execution of technical tasks using tools like PLS-CADD and PLS-POLE and will contribute to the quality control process. This will involve working with a multi-person Leidos team and supporting clients, project planning, environmental, permitting, and construction management personnel. Work Locations: Ideal candidates will be located in Michigan, Ohio, West Virginia, Maryland, Pennsylvania, & New Jersey working a hybrid schedules. Fully REMOTE positions are available for qualified candidates. Relocation assistance will be provided to those able to relocate within a commutable distance to Walled Lake, MI or Cranberry Township, PA. The Challenge: • Execute technical design and engineering tasks related to high-voltage transmission lines, ensuring compliance with all applicable codes and standards., • Prepare and review technical drawings, specifications, and calculations under the guidance of Lead Engineers or Project Managers., • Perform engineering analyses, including PLS-CADD modeling and structure loading calculations., • Contribute to the team's continuous improvement goals by learning and applying new technical tools, AI, and automation platforms., • Actively communicate and coordinate project progress with the Project Manager (PM) to ensure awareness of and adherence to project schedule and budget. (This directly incorporates your PM/Schedule change.), • Maintain strong technical proficiency in industry-standard software and Leidos design processes. Required Education & Experience: • Bachelor’s in Civil, preferred, or Mechanical Engineering with two plus (2 +) years of relevant experience in the design of electric utility transmission systems., • Experience using PLS-CADD and PLS-POLE., • Work effectively in team environment; can also work independently., • Strong interpersonal and written communication abilities, with a focus on effective collaboration across client and project teams., • Work in client office is a possibility and/or periodic travel may be required. Desired Experience: • Experience with TOWER is a plus, • EIT or PE certification is desirable, • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. February 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Job Description Position Summary: The quality control project engineer is responsible for ensuring that quality control systems in place at TP Mechanical are followed and maintained. This specialist’s job description involves the inspection and documentation of finished and semi-finished products to ensure that they comply with agreed upon standards and specifications. The quality control specialist keeps records of equipment deliveries, inspects systems installed, identifies supplier problems with respect to quality and delivery, and recommends actions to solve these problems if necessary. Responsibilities and Duties: • Inspects and tests manufactured products, • Trains and assist other inspectors with their duties, as needed, • Visually inspects products and materials according to specifications to ensure conformity to established standards, using a variety of measuring instruments, calipers, micrometers, and gauges., • Conducts standardization tests on raw materials in order to establish their physical properties or composition, such as tensile strength or powder density, • Compare product samples with specifications to ensure conformance with established standards when necessary, • Perform precision tests on products to determine their suitability for further construction processes, such as metal casting or machining, • Adjusts machine-controlled devices that control material flow in construction processes, • Determines the extent of damage in unfinished or defective parts by examining them with electronic measuring devices and comparing their extent to specifications or blueprints, • Prepares inspection reports and logs that show the details of all tests performed in the previous day or week, including the results of each test, the date, and an estimate of the amount of time required to perform certain tests., • Overseeing a Quality Control Program for the HVAC product line to improve product quality and provide QC records as required., • Interpreting engineering drawings, sketches, or diagrams and developing or implementing programs to address production, materials, safety, or quality issues., • Operating QC inspection equipment on-site or off-site and conducting quality control tests to ensure consistent production quality., • Collecting and analyzing data related to quality and leading the QC team in absence of the QC Manager or Engineer., • Monitoring and auditing suppliers to include on-site visits to supplier sites and overseeing inspections of raw products or equipment., • Developing and maintaining spreadsheets for evaluating or reporting QC data., • Complying with established safety policies and procedures and wearing required Personal Protective Equipment as directed., • Providing feedback related to hazard assessments and/or accident investigations and acting in accordance with company policies., • All other duties as assigned. Qualifications and Experience: Experience/Qualifications Required: · Minimum 1-year mechanical experience and/or related educational background. Job Skills: · Analytical skills-Ability to use thinking and reasoning to solve problems. · Technical skills, soft skills, and industry knowledge. · Ability to read and interpret blueprints. · Knowledge of general plumbing and piping installation. · Good math ability. · Good basic computer skills. · Detail oriented. · Strong organizational skills. · General accounting skills. · Excellent verbal and written communication skills. Education: · Minimum of High School Diploma or GED equivalent. Bachelor’s Degree in Business, Engineering or equivalent is preferred. Physical Requirements: · Able to walk job sites. Special Requirements: · Valid Driver’s License · OSHA 10 Company DescriptionTriplePoint, through our family of companies, delivers end-to-end solutions to our customers, from pre-construction expertise through contracting and fabrication to service and maintenance for piping, plumbing, HVAC/R and fire protection. We do this as a relationship-focused organization that leverages seven decades of experience providing innovative solutions with excellence that drive down costs, enhance safety, increase value and deliver speed to occupancy.TriplePoint, through our family of companies, delivers end-to-end solutions to our customers, from pre-construction expertise through contracting and fabrication to service and maintenance for piping, plumbing, HVAC/R and fire protection. We do this as a relationship-focused organization that leverages seven decades of experience providing innovative solutions with excellence that drive down costs, enhance safety, increase value and deliver speed to occupancy.

Job DescriptionGrowing full service firm looking to add a talented Transmission Line QA/QC Engineer to their Columbus office! Responsibilities: • Oversee design reviews/validation procedures, • Ensure accuracy and safety of the design of high voltage transmission lines using PLS-CADD, • Establish quality standards aligned with industry best practices, • Develop/implement quality control procedures, • Mentor/train junior staff with varying levels of experience, • Champion QA/QC processes to ensure consistent delivery of high-quality engineering outputs, • Communicate with project managers to align quality goals with schedule/budget Requirements: • Bachelor’s degree in civil, mechanical or electrical engineering or engineering technology, • 5+ years of transmission engineering experience, • Licensed Professional Engineer (PE), • Proficient in PLS CADD, • Expert in the analysis of transmission structures, • Ability to comprehend and interpret safety codes, utility standards and regulations, • Ability to optimize complex systems and workflows, • Ability to translate technical concepts for diverse audiences and drive cross-functional collaboration, • Valid Driver’s License is required Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job DescriptionPosition Description: IAP Government Services Group is a National Construction Management firm with an immediate opening for a QAQC. IAPs successful project performance is driven by our objective to deliver quality projects that are completed on time and within budget while exceeding the expectations of our clients. The Quality Assurance/Control responsibilities is to effectively lead the construction team and ensure they have all the resources they need. Position Responsibilities: \tConducts and carries out portions of daily inspection of site work, building construction work, document discrepancies, code violations, improper materials, or technique in the application of materials, substandard or poor-quality workmanship, monitors schedules on various aspects of ongoing daily activities to identify and mitigate slippage and coordinate project phasing. \tReviews submittals and RFIs, maintains accurate and complete job files including as-built drawings and specification, identifies progress delays and recommends appropriate corrective measures to the Project Manager and/or Superintendent. \tConduct or attend weekly progress meetings to monitor project status, schedule, discuss problems, and resolve issues accordingly. \tReview the testing/inspection reports submitted and approve/disapprove \tKeep thorough records of all construction related matters. \tPerform daily quality control reports. \tMaintaining list(s) of observed defects and omissions. \tPrepare punch lists and coordinate resolutions of punch list items. \tAvailable to work after normal duty hours, on nights from 5pm to 7am and/or weekend as the project requires. \tMust be able to communicate fluently in English. \tEnsure installed work is consistent with the approved submittals to make recommendations for final approval of installed work. \tUtilizing computerized management systems applications, processing request for information, maintaining an inventory of materials, supplies and equipment and monitoring the quantity of materials used. \tObserve work being conducted by subcontractors for proper installation and application of construction materials. \tReview samples of equipment and materials to be utilized for construction and provide analysis. \tMaintain mark-ups set of project plans and specifications for future as-built drawings. \tCompile deficiency logs and follow up on correction. \tCoordinate inspections. \tCoordinate testing and commission work. \tTake digital photos of construction progress throughout the duration of the project. \tClose out activities: warranty and O&M \tPerform additional assignments per supervisors direction. Compile deficiency logs and follow up on correction. \tCoordinate inspections. \tCoordinate testing and commission work. \tTake digital photos of construction progress throughout the duration of the project. \tClose out activities: warranty and O&M \tPerform additional assignments per supervisors direction. Knowledge, Skills and Abilities: Quality Control Manager - \tBachelors degree in: Construction Management, Engineering, related field - OR \tMinimum of 5 years combined experience in the following positions: Project Superintendent, QC Manager, Project Manager, Project Engineer or Construction Manager on similar size and type construction contracts which included the major trades. \t2yrs+ experience as a QC Manager. \tExperience in the areas of hazard identification, safety compliance, and sustainability. \tDetail knowledge of both site and vertical construction means and methods \tMastered ability to review and understand federal contract documents, plans, specifications, and Federal Acquisition Regulations (FAR) \tProficient in MS Outlook, Word, Excel, and Microsoft Project \tProcore (5yrs) \tExcellent mathematical, reading, technical writing and note taking skills \tStrong communication, organization, safety, and teamwork skills \tPrior work experience with a Construction Management, General Contractor, Architectural or Engineering firm. Preferred but not required. Job Details: Attractive Compensation Package • Based on Experience -

Job Description Hillis-Carnes Engineering Associates, Inc. (HCEA), a 100% Employee-Owned Firm (ESOP) is seeking the ideal candidate for the Branch Manager position at our new operation in Columbus, Ohio: At HCEA, our Branch Managers are considered the keys to our long-term success. This exciting and dynamic position requires excellence in six key competencies: Industry Experience: Candidate shall have specific management and technical experience in the field of Construction Materials Testing and Inspection Services, commonly referred to as IBC Chapter 17 Special Inspections and Tests. If the candidate also has experience in practicing Geotechnical Engineering, that is a huge plus. Business Development: Primary focus is to strategically capture and maintain profitable revenue streams for your branch. Establish and maintain effective relationships with local client base with particular emphasis on Architects, Civil Engineers, Commercial & Residential Developers, General Contractors, Health Care & Educational Institutions; Participate in networking events, trade shows and local community organizations; Gaither competitor information and market intelligence. Client Management: Enhance our client satisfaction ratings by providing thorough, professional service and maintaining continuous communications to build long-term relationships. Operations Management: Lead all day-to-day branch operations including direct supervision of project management, dispatch, laboratory, administrative and support staff. Quality Control: Oversee the technical excellence of all branch service providers and ensure that the highest levels of quality and integrity are the standard deliverable to our clients. Business Management: Manage all branch resources to maximize growth and profitability. Our Branch Managers have full P&L responsibility for their business units including budgeting/forecasting, staffing, and margin and cost control. Requirements • Solid Industry specific Management/Leadership skills to interface with Staff, Management, and Clients., • Experience with expansion efforts of new branch including strategizing, managing, and growing an internal team of professionals as well as creating and maintaining business relationships, a plus., • Excellent oral and written communication skills., • Minimum of 10 years' experience in the Construction Inspection and Testing Industry with an emphasis on management and/or quality control. We offer an excellent compensation and benefits package, including participation in our ESOP, health, disability, life, 401k with company match, generous paid time off and more. Equal Opportunity Employer Women and Minorities are encouraged to apply. Job Posted by ApplicantPro

Job DescriptionDescriptionThe Mannik & Smith Group, Inc. (MSG) is a people focused, award-winning, full-service consulting firm that offers a wide array of services including civil and geotechnical engineering, environmental consulting, planning, landscape architecture, agriculture, surveying and construction support. Our talented staff of more than 650+ professionals deliver integrated planning, design, engineering and construction solutions. Due to MSG's continued growth, a new opening is available for a Civil Project Manager (Residential) to assist with our projects in Columbus! Key ResponsibilitiesProject Leadership & Delivery • Manage comprehensive civil engineering design for large residential developments, including: Master planning, lot layout, road networks, open-space design, • Grading and earthwork balancing, • Sanitary, storm, and water utility design, • Stormwater management and detention/retention systems, • Lead project planning including scope, schedule, resourcing, and budget management., • Oversee preparation of construction drawings, engineering reports, and permitting packages., • Serve as primary client contact for residential developers, builders, and landowners., • Build and maintain strong relationships with regional and national homebuilders., • Present project deliverables to clients, regulatory agencies, and municipal authorities., • Manage permitting and reviews with municipalities, local review agencies, and Ohio EPA., • Navigate zoning, entitlement processes, and early-stage land planning requirements., • Oversee construction-phase services including:, • Site visits, • Responding to RFIs, • Reviewing change orders, • Coordinating with contractors and field staff, • Direct and mentor a team of engineers, designers, and technicians., • Coordinate multi-disciplinary support from environmental, transportation, survey, construction and geotechnical groups., • Bachelor’s degree in civil engineering or a related field., • Professional Engineer (PE) license, preferably in Ohio, or ability to obtain within 6 months., • 8+ years of civil site development experience, with at least 2 years focused on residential land development., • Strong proficiency with AutoCAD Civil 3D (alignments, corridors, grading, profiles, pipe networks)., • Demonstrated experience managing clients, projects, budgets, and multi-disciplinary teams., • Experience with large, multi-phase residential communities or master-planned developments., • Familiarity with Columbus-area permitting agencies and development processes., • Strong understanding of hydrologic/hydraulic modeling and stormwater best practices., • 401(k) w/ company match, • Health insurance w/ HSA option, Vision, Dental, Life, • Flexible schedule, • Paid time off, • Referral program, • Tuition reimbursement, • Catalytic Coaching - Employees draft a development plan aimed at improving contributions in their current job and increasing the potential for other opportunities. MSG is all about bringing out the best in people at work!It is the policy of our company to follow equal employment opportunity procedures in compliance with federal, state and local criteria. We will provide all applicants for employment, and all employees, with equal opportunity without regard to race, color, religion, national origin, age, sex, height, weight, marital status, arrest record, disability, pregnancy, sexual orientation, gender identity or expression, genetic information, military or veteran status, and/or any other protected classes covered by any local, state and federal laws.

Job Description Senior Quality & Project Engineer Dublin, OH – Onsite / Hybrid (Local Candidates Preferred) Full-Time | Medical Device | Robotics + Clinical Innovation We are developing a breakthrough robotic medical device designed to improve patient outcomes and transform how clinicians deliver care. We are seeking a Senior Quality & Project Engineer to build and own our quality system while driving cross-functional project execution across engineering, clinical, and regulatory workstreams. This is a high-impact, hybrid role blending Quality Engineering and Project Management, ideal for someone who thrives in fast-paced early-stage environments, is energized by ownership, and wants to help bring a first-of-its-kind device to market. What You’ll Do Quality Engineering (Primary Long-Term Focus) • Lead the development, implementation, and ongoing management of an electronic Quality Management System (eQMS), • Ensure compliance with ISO 13485, current FDA regulations and guidance, and conformity to relevant recognized standards such as IEC 62304 and IEC 62366-1, • Maintain core QMS elements including DHF, DMR/DHR, CAPA, Risk Management Files, document control, and change control, • Evaluate the current QMS platform and lead migration to an industry-recognized eQMS if appropriate, • Partner closely with clinical leadership to support readiness for upcoming testing, verification/validation, and future clinical trials, • Serve as the internal SME for quality requirements and help the team interpret standards as the device evolves, • Establish and maintain the single integrated project schedule (“schedule of truth”) across engineering, clinical, quality, and regulatory teams, • Run recurring milestone meetings, ensuring dependencies, risks, and timelines are clear and aligned, • Coordinate cross-functional execution, driving follow-through, documentation readiness, and timely decision-making, • Interface with Jira (reading tickets, understanding software timelines, logging issues) and integrate software progress into broader project planning, • Apply structured PM methodologies (Six Sigma, Lean, PMP, or similar) to improve visibility, reduce slippage, and increase operational consistency What You Bring Required Qualifications • 5+ years of experience in medical devices, including 3+ years directly in Quality Engineering, • Direct experience with ISO 13485–aligned QMS implementation, ownership, or maintenance, • Ability to understand, interpret, and apply FDA regulations and relevant recognized standards, including:, • IEC 62304 – medical device software lifecycle processes, • IEC 62366-1 – usability engineering, • Experience supporting products through prototype → product development → regulatory readiness, • Strong documentation, communication, and cross-functional coordination skills, • Demonstrated ability to thrive in fast-moving, ambiguous early-stage environments Preferred Qualifications • Experience migrating or configuring medical-grade eQMS platforms (e.g., Greenlight, Enzyme, Qualio, MasterControl), • Familiarity with robotics, embedded systems, or software-heavy medical devices, • Experience with Jira, MS Project, Smartsheet, or similar tools, • Six Sigma Green Belt or Black Belt, PMP, or equivalent PM certification, • Prior startup or small-team engineering experience Who You Are • A builder who enjoys creating systems, structure, and process from the ground up, • Equally comfortable with big-picture planning and detailed execution, • A low-ego contributor who thrives in small, high-collaboration environments, • Adaptable, curious, and energized by solving meaningful, messy problems, • Onsite required at the Dublin, OH facility, Hybrid may be considered for local candidates (2–3 days onsite weekly minimum), • Equity: Stock options, • Benefits: Medical, dental, vision, flexible PTO, paid holidays, winter shutdown, • Relocation support available for candidates moving to the Columbus/Dublin region

Job Description Mechanical Engineer / Project Manager Columbus, OH Direct Hire/ Permanent Placement $80k-$120k, Hybrid, Full Benefits, Bonuses, 401k match EPC STAFF works with Architectural, Engineering, and Construction Firms and MEP Consultants nationwide. ROLE/ RESPONSIBILITIES/ HIGHLY PREFERRED EXPERIENCE • Prepare mechanical system construction documents, • Technical design and quality control, mechanical system calculations, and layouts, • Production of construction documents, Construction administration, site visits, and shop drawing review, • Project Management, • Revit, AutoCAD, Trane Trace, • HVAC system, ductwork, and hydronic design, • BSME, BSAE, or similar with 3+ years’ experience, • EIT or PE (preferred)

Job Description Electrical Engineer – Power Systems & Water Infrastructure San Jose, CA | 100% In-office role | Relocation Required Full-Time | Permanent | Direct Hire Salary Range: $120,000 – $165,000 About the Opportunity We are recruiting on behalf of a well-established California-based water utility for a permanent, direct-hire Electrical Engineer to join their San Jose engineering team. This role supports the planning, detailed design, and construction design support of critical water infrastructure, with a strong emphasis on electrical power systems, controls, and motor control centers. This is a long-term career opportunity with a stable utility organization supporting essential public infrastructure. What You’ll Do The Electrical Engineer will provide electrical and controls engineering support for water facilities, including: • Prepare electrical construction drawings and technical specifications, • Perform advanced electrical engineering calculations, including:, • Short circuit current calculations, • Voltage drop calculations, • Breaker coordination studies, • Arc flash analysis, • Design and support low- and medium-voltage power distribution systems, • Design and work with motor control centers (MCCs), • Develop bid packages and support procurement of major electrical equipment, • Prepare RFPs and evaluate consultants and vendors, • Manage project scope, schedule, and budget, • Coordinate with contractors, consultants, agencies, and internal stakeholders, • Support construction management and field inspections, • Prepare reports, cost estimates, and technical documentation, • Assist with PUC rate case filings and annual capital budgets, • Present technical information to public agencies, special districts, and community groups, • Provide technical support to operations and maintenance teams, • Participate in continuous improvement initiatives Required Qualifications • Bachelor’s degree in Electrical Engineering (required; equivalent experience or coursework does not substitute), • Minimum 2 years of experience working as an Electrical Engineer, • Hands-on electrical design experience (power distribution, schematics, specifications) — candidates with installation support backgrounds only will not be considered, • Demonstrated knowledge of the National Electrical Code (NEC) as applied to power distribution (not controls-only) — candidates must be able to cite applicable NEC articles during interview, • Experience with motor control center (MCC) design (not just installation), • Experience with generator system design, including standby/emergency power systems and generator installation design, ATS equipment, an the like, • Experience with Arc Flash analysis principles and applicable NFPA 70E standards, • Proficiency with AutoCAD and development of design plans, • Project management experience with the ability to manage multiple priorities, • Strong written and verbal communication skills, • Proficient in Microsoft Office/M365, • Valid California Driver License (or ability to obtain one if coming in from out of state) Preferred Qualifications • California Engineer-in-Training (EIT) certification or California PE, • Experience using ETAP or similar power system modeling software, • Experience in water, wastewater, or process industries, • Experience working with consultants and contractors Why This Role • Direct hire, permanent position with a utility client, • Long-term career stability in essential infrastructure, • Competitive salary with a comprehensive utility benefits package, • Relocation assistance may be considered for the right candidate, • Work on high-impact capital projects that support local communities, • Strong internal engineering culture and professional development opportunities Benefits Our Client offers a comprehensive benefits package including: • 401(k) Plan with employer match, • Defined Benefit Pension Plan — 100% employer-funded, vests at 5 years, • Comprehensive Medical, Dental, and Vision coverage through the utility’s Health Care Plan or Kaiser Permanente, effective the first of the month following date of hire, • Life Insurance and Accidental Death & Dismemberment, effective the first of the month following date of hire, • Long-Term Disability, • Tuition Reimbursement, • 35 days of paid time off annually — 11 paid holidays, 4 floating holidays, 10 vacation days, and 10 sick days Union Membership This position is covered under a collective bargaining agreement. The successful candidate will be required to be a member of, or become a member of, the International Federation of Professional and Technical Engineers (IFPTE), AFL-CIO. The IFPTE represents engineering and technical professionals — not craft or trade workers — and is the union of record for our Client’s engineering and water quality employees.

Job Description Location: Position requires travel so the candidate can be located anywhere within the US. Why CCI? CCI Systems, Inc. is an Employee-Owned solution provider specializing in telecommunications, comprehensive network assessments, industry-leading engineering, drafting and design services, and 24/7 support services. Come join our team of engineers and experts that guide our customers toward the right choices to future-proof their network for years to come. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking a Field Engineer to provide technical expertise pertaining to customer network upgrades, services, field management and project administration with a full understanding of HFC distribution systems. Responsibilities • Assess Outside Plant (OSP) and Inside Plant (ISP) hardware and infrastructure including but not limited to plant documentation, Hybrid Fiber Coax, (HFC) active and passives, reading and understanding OSP diagrams/drawings, taking and maintaining accurate field notes, operation of a bucket truck, accessing network enclosures and nodes and operation of testing gear., • Correct customer network failures and improve overall network performance using sweep gear and CATV test equipment., • Diagnose and repair plant related issues to reduce upstream noise and forward path impairments within the cable system with the use of standard OSP tools to include OTDR's, TDR’s, light meters, and signal strength meters., • Conduct targeted system sweeps, document findings, and deliver system information to create system reports., • Perform head end and meter set up., • Perform DOCSIS 3.1 testing and assessments., • Calculate system signal losses and make necessary adjustments to resolve issues., • Reduce and diagnose upstream noise within the cable system., • Install/align/optimize HFC equipment including fiber optic nodes and related equipment., • Install in-line devices on system backbone (node, amplifiers, line extenders, taps, splitters, and power supplies) as necessary for sweep and system upgrade projects., • Work with customers, subcontractors, and other team members in the field to define, collect, and determine information from customers and customer facilities for project requirements., • Implement and oversee a team of technically sound, customer-minded, and quality focused technicians and subcontractors tasked with delivery of best-in-the-world services to CCI Systems, Inc. customers., • Assign daily workload to in-house technical staffing and subcontract labor to enable TFS to fulfill contract obligations with customers., • Work with project managers to ensure daily field operations, staffing, quality control and deliverables are driving necessary profitability goals per project., • Approve weekly project documentation; this includes subcontractor production reporting, in-house employee production reporting, technical documentation, and other necessary documentation., • Meet with customers at local level to discuss any project related issues., • Understanding the project SOW and escalation process for deviations., • Report accurate daily project updates for productivity tracking and project billing., • Define, develop, and share technical knowledge and stay current on technical advancements., • Ensure the proper development and training of new employees to assigned project., • 5-7 years’ experience as a Coax Splicer., • 5-7 years’ experience in a HFC Sweep/Technician role within the Service Provider space., • Consulting background and experience working with multiple customers preferred., • Sweep certification preferred., • DOT Certification & Bucket Truck and Safety Certifications preferred., • Test equipment will include but not limited to the following: VIAVI SCU 1800 Sweep Generator, VIAVI OneExpert ONX-630, VIAVI DSP TDR, OTDR, VOM, and Light Meter., • Full understanding of Viavi/JDSU gear regarding sweep; includes head end and meter set up., • DOCSIS testing experience., • Full understanding of an HFC head end; combining, optics (forward and return), and basic understanding of CMTS, FTTX, and ISP., • In-Depth understanding of OSP (outside plant) and proficient in troubleshooting., • Test result evaluation and reporting., • Able to work independently on projects and take direction from teammates and develop skills to advance professionally., • Strong verbal and written communication skills., • Ability to take direction and work within timelines., • Demonstrates leadership skills to positively influence others, mentor, and collaborate with teammates, communicate on the level of others, listen, and understand people in circumstances common in the workplace. Additional information • Approximately 75% nationwide travel is required, typically 14 days on-site, travel days, and 5 days off at home., • Must have a valid driver’s license and a good driving record., • Must be able to pass a DOT Medical Examination to obtain and maintain a DOT Commercial Motor Vehicle Certification., • This is a remote position when not traveling. #LI-DNI

Job DescriptionPosition Description: IAP Government Services Group is a National Construction Management firm with an immediate opening for a QAQC. IAPs successful project performance is driven by our objective to deliver quality projects that are completed on time and within budget while exceeding the expectations of our clients. The Quality Assurance/Control responsibilities is to effectively lead the construction team and ensure they have all the resources they need. Position Responsibilities: \tConducts and carries out portions of daily inspection of site work, building construction work, document discrepancies, code violations, improper materials, or technique in the application of materials, substandard or poor-quality workmanship, monitors schedules on various aspects of ongoing daily activities to identify and mitigate slippage and coordinate project phasing. \tReviews submittals and RFIs, maintains accurate and complete job files including as-built drawings and specification, identifies progress delays and recommends appropriate corrective measures to the Project Manager and/or Superintendent. \tConduct or attend weekly progress meetings to monitor project status, schedule, discuss problems, and resolve issues accordingly. \tReview the testing/inspection reports submitted and approve/disapprove \tKeep thorough records of all construction related matters. \tPerform daily quality control reports. \tMaintaining list(s) of observed defects and omissions. \tPrepare punch lists and coordinate resolutions of punch list items. \tAvailable to work after normal duty hours, on nights from 5pm to 7am and/or weekend as the project requires. \tMust be able to communicate fluently in English. \tEnsure installed work is consistent with the approved submittals to make recommendations for final approval of installed work. \tUtilizing computerized management systems applications, processing request for information, maintaining an inventory of materials, supplies and equipment and monitoring the quantity of materials used. \tObserve work being conducted by subcontractors for proper installation and application of construction materials. \tReview samples of equipment and materials to be utilized for construction and provide analysis. \tMaintain mark-ups set of project plans and specifications for future as-built drawings. \tCompile deficiency logs and follow up on correction. \tCoordinate inspections. \tCoordinate testing and commission work. \tTake digital photos of construction progress throughout the duration of the project. \tClose out activities: warranty and O&M \tPerform additional assignments per supervisors direction. Compile deficiency logs and follow up on correction. \tCoordinate inspections. \tCoordinate testing and commission work. \tTake digital photos of construction progress throughout the duration of the project. \tClose out activities: warranty and O&M \tPerform additional assignments per supervisors direction. Knowledge, Skills and Abilities: Quality Control Manager - \tBachelors degree in: Construction Management, Engineering, related field - OR \tMinimum of 5 years combined experience in the following positions: Project Superintendent, QC Manager, Project Manager, Project Engineer or Construction Manager on similar size and type construction contracts which included the major trades. \t2yrs+ experience as a QC Manager. \tExperience in the areas of hazard identification, safety compliance, and sustainability. \tDetail knowledge of both site and vertical construction means and methods \tMastered ability to review and understand federal contract documents, plans, specifications, and Federal Acquisition Regulations (FAR) \tProficient in MS Outlook, Word, Excel, and Microsoft Project \tProcore (5yrs) \tExcellent mathematical, reading, technical writing and note taking skills \tStrong communication, organization, safety, and teamwork skills \tPrior work experience with a Construction Management, General Contractor, Architectural or Engineering firm. Preferred but not required. Job Details: Attractive Compensation Package • Based on Experience -

Job Description Leading design-build general contractor is seeking an experienced Project Superintendent for manufacturing projects in Ohio and across the U.S. If you have experience as the Prime Contractor managing complete oversight of construction sites, we would love to hear from you! While an industrial background is highly desired, we welcome applicants with commercial experience. Job Title: Project Superintendent Report to: (Sr.) Project Manager Salary: up to $110,000 per year. Full-time, exempt role. Benefits: Health, Dental, Vision, up to 3% retirement contribution, vacation and sick time. Eligibility to work in the United States required including a valid driver’s license. Sponsorship unavailable. Candidates must be willing and able to travel to project sites across the U.S. (and Canada if applicable). Projects are based in Ohio, with paid mileage to the job site and per diem provided for any out-of-state assignments. Summary Project Superintendent will oversee on-site construction operation on a day-to-day basis, and ensure that work is done safely, on time, within budget and to the right quality standards under supervision of the Senior Project Manager or Project Manager. Responsibilities • Coordinate and supervise full cycle construction activities, • Set up the project site office trailer and make sure that permits, labor notices, safety regulations, and EEOC material are posted in a conspicuous place. Set up sanitary stations and coolers, • Direct all field personnel (contractors, suppliers, vendors) to achieve completion of the project on schedule with quality workmanship that conforms to the drawings and specifications, • Maintain construction schedule and identify and solve problems, • Keep the progress schedule current and review schedule status, • Order materials and schedule inspections as necessary throughout the process, • Promote job site safety, encourage safe work practices and rectifies job site hazards immediately, • Ensure all employees and contractors are adhering company safety policy and attend safety meetings, • Prepare complete, accurate and timely submittal logs for construction projects based on project drawings and specifications, • Accountable for receiving approved submittals from Architect or Engineer and notifying Project Superintendent of potential schedule impact, • Assist Project Manager by preparing all necessary back up related to change requests, • Responsible for timely completion of all required project close-out documents per contract, • Distribute contract documents to subcontractors, including drawings, specifications, and general conditions. Include any accepted alternates or addendums with documents, • Schedule all required construction meetings with required personnel, subcontractors, architects and owners, • Take accurate and complete meeting minutes and distribute timely, • Attend Owner/Architect pre-bid, project and closeout meetings, • Solicit subcontractors and suppliers for proposal prior to proposal submission time, • Prepare correspondence with Owner, Architect, Engineers, Subcontracts, Suppliers, etc. (Examples of referenced correspondence include, but not limited to the following items: Schedule of values, project schedule, memos, request for information, transmittals and submittals), • Submit building permit application, follow-up on review progress and receive upon approval. Submit Check Request (Urgent Pay Request) to Accounting for associated fees according to Urgent Pay Request procedures, • During Construction Phase, proactively manage project to achieve quality, schedule, budge and safety. Utilize and maintain tools to schedule and document management to track and record project performance, • Document quality and progress of each Subcontractor and Suppliers. Update Subcontractors and Suppliers of any changes to the plans, specifications and/or schedule, • Inform management of productivity, costs, quality control, document management and processing of applications for payment. Notify management of any issues that arise which affects quality, budget, progress and safety, • Prepare, schedule and supervise completion of a final punch list, • Maintain an organized job site, including the construction office, • Maintain positive relationships with customers, contractors, suppliers and other employees, • Must have minimum of 5 years in successful general contracting (as Prime Contractor) and project management for larger than 50,000 sq ft project, • Familiar with standard concepts, practices and procedures within the construction field, • Understand and have thorough knowledge of the project plans and specifications, • Strong and effective communicator, both verbally and written, who can interface cooperatively with various departments of the company, as well as clients and subcontractors, • Possess good organizational, analytical and problem solving ability, • Detail oriented with the ability to multi-task, • Proficient in Microsoft Word, Excel, PowerPoint and Project, • Represent the company at all times with high moral and ethical conduct, • Willingness to provide leadership and management, • Excellent presentation and negotiation skills, • An overall “action orientation” and strong problem solving abilities Any combination of education and experience that provides the necessary knowledge and skills. Minimum of 5-7 years' progressively responsible field experience as Prime Contractor.

Job Locations US-OH-Columbus Requisition ID 2026-12089 Category Project Engineering Are you looking for a highly rewarding opportunity that provides extensive career growth opportunity? Gilbane is seeking a Project Engineer to be responsible for obtaining, evaluating, coordinating, and distributing all related project information and documentation to assist the project team in maintaining the project timeline, within budget and to the quality specified. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are someone who acts inclusively, showing empathy and treating others with respect and dignity in order to uphold Gilbane's core value of Caring and "People First" workplace culture. You seek to listen in order to understand and can convey information clearly. You're a strong problem solver who can identify, prioritize, and implement alternatives for solutions, and you demonstrate adaptability by collaborating with others and supporting team members to achieve excellence. A self-starter who shows passion, commitment, and ownership all while delivering on business outcomes and driving results. You're someone who identifies opportunities for new and improved ways of doing things that result in value-add solutions. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources. While managing your responsibilities to projects, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, you would work with an experienced team which provides you with the opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. Manages the change management process effectively under the direction of the Project Manager • Serves as a key player in monthly cost report meetings and contributes with meaningful data/talking points, • Adheres to the project controls procedures to include monthly cost control, pay requests, and cost reporting successfully, • Expedites material deliveries effectively, • Reviews and evaluates shop drawings accurately, • Encourages others to seek opportunities for different and innovative approaches to problems and opportunities continually, • Develops business through identifying client needs, identifying Gilbane opportunity matches, and communicating the value and differentiation of Gilbane to prospective clients, • Reviews customer feedback proactively, builds a customer centric mentality within teams, and demonstrates knowledge of different market sectors and delivery systems to ensure positive customer relations, • Coaches and mentors less experienced team members, • Bachelor's degree in Engineering or Construction Management, • 4+ years of experience with a large trade contractor, construction management or general contractor organization, • Strong verbal and written skills, • Ability to work in a team environment, • Proficient in Microsoft Office programs, • Proven capability to establish specific measurable, attainable performance goals and hold others accountable for achieving them, • Demonstrated ability to build active team participation, team trust and strengthen positive interactions, • Ability to articulate financial knowledge and customer satisfaction awareness of how the company makes a profit, • Demonstrated ability to adapt personal communication style to suit the target audience and situation including highly effective presentations, clear and concise writing on complex and sensitive topics, and understanding through paraphrasing and use of relevant examples, • Financial management familiarity, • OSHA 30-hour certification, • MEP knowledge, • Understanding of contract documents & specifications, • Proficient in Procore, • Expertise in CMiC preferred Salary to be determined based on factors such as geographic location, skills, education, and/or experience of the applicant, as well as the internal equity and alignment with the team. For Ohio this ranges from $83,200-$110,000 plus benefits and retirement program. Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

Job Description ABOUT ITC MANUFACTURING: Our Why: Pride in Every Weld. Our purpose is simple - to build trust with relentless quality and to empower every person by turning hard work into lasting opportunity. Our Mission: We engineer and manufacture precision wire mesh solutions that meet the highest standards of quality, safety, and performance. By aligning our expertise with each customer’s specific needs, we build trust through consistent delivery, proven durability, and pride in every weld. Our Core Values: • Craftsmanship – We take pride in precision and quality - every mesh we make reflects our skill and standards., • Care – We value people and processes, protecting safety, promoting sustainability, and creating satisfaction at every step., • Trust – We build lasting relationships through consistent quality, transparency, and reliability., • Accountable – We own our work, honor our commitments, and deliver results you can count on., • Competitive pay, • Comprehensive medical, dental, and vision insurance plans, • 100% employer paid medical option available, • Short- and long-term disability insurance, • Life and AD&D insurance, • Paid vacation time, sick and holiday pay, • 401(k) retirement plan with an employer match, • $5,000 undergraduate & $15,000 graduate annual tuition reimbursement 3rd Shift Monday-Thursday 8:30pm-7:30am *Training will be Monday-Friday 7am-3:30pm for up to 6 weeks We are seeking an experienced Maintenance Technician that will be responsible for facility and equipment maintenance, maintaining our facility to provide a neat and professional appearance and optimizing repair and maintenance expenditures. Assist in developing and interpreting blueprints and schematics. Key factors to success are the ability to assist in fostering a well-trained and motivated staff, be a team player while maintaining a professional demeanor are critical. SUMMARY Responsible for facility and industrial machine equipment maintenance. Assist in developing and interpreting blueprints and schematics. PRIMARY RESPONSIBILITIES • Responsible for troubleshooting and repairing production machines., • Provide support to the manufacturing processes by repairing industrial equipment including electrical components, motors, pumps, hydraulic systems, compressors, chillers and boilers., • Follow and interpret blueprints., • Follow and interpret schematics., • Responsible for the maintenance of complete production lines., • Complete PM in a timely manner., • Assure compliance with appropriate safety practices and procedures and with applicable federal, State, and local codes, regulations, and requirements., • Perform skilled maintenance and repair on mechanical and electrical equipment., • Five years of experience in Industrial Maintenance., • Basic computer and mathematical skills., • Experience in troubleshooting of one or more of the following PLC programs: Siemens, S5, S7, ABB, and Bosch is a plus., • Understand control wiring, and logic diagrams., • Heavy lifting (up to 50 pounds), bending, and stooping may be required., • Must be able to work overtime as needed., • Responsible for assisting with improvements of the production equipment and controls to increase productivity throughout the Columbus facility., • Must be dedicated to, and assist in the carrying out of the goals, plans, and policies of the department. They will carry oneself in a manner consistent with sound principles. They will also be responsible for following all policies, procedures, and instructions in accordance with company guidelines., • Ability to multitask, completing projects while supporting daily activities., • Excellent oral and written communication skills., • Work in a team-oriented process by being an active participant., • Work with minimal supervision., • PLC and HMI troubleshooting experience are a plus., • Desire for "hands-on" engineering.

CAS uses intuitive technology, unparalleled scientific content and unmatched human expertise to help companies create groundbreaking innovations that benefit the world. As the scientific information solutions division of the American Chemical Society, CAS manages the largest curated reservoir of scientific knowledge, and for 115 years, has helped innovators mine, assess and apply that information to keep businesses thriving. The CAS team is global, diverse, endlessly curious and strives to make scientific insights accessible to innovators worldwide. CAS is currently seeking a Software Engineer. This position will be located in our headquarters in Columbus, Ohio. Job Summary: In this role, you will design, build, and deploy software applications, services, and systems that advance the scientific capabilities of CAS Custom Services, offering expert scientific knowledge management consulting and custom informatics solutions. As a member of an Agile team, you will work closely with product owners and teammates to refine backlogs, groom epics and user stories, and prepare for upcoming sprints. Success in this role requires a strong understanding of project processes, the ability to collaborate effectively, and a proactive approach to solving technical challenges. Job Duties: Software Development • Design, develop, and enhance complex software applications, services, and systems across multiple Agile delivery teams, applying advanced engineering principles to deliver high‑quality CAS products and solutions., • Partner strategically with product owners and cross‑functional teammates to refine and prioritize, ensuring clarity of scope, feasibility, and alignment with broader product roadmaps., • Champion modern engineering practices by advancing automated testing frameworks, continuous integration/continuous delivery (CI/CD), and robust change‑control methodologies., • Build influential relationships with stakeholders across CAS to align technical execution with business needs, resolve cross‑team challenges, and accelerate shared outcomes., • Stay ahead of emerging technologies and industry trends, proactively assessing their application to CAS solutions and influencing team adoption of modern tools, patterns, and practices., • Engage in ongoing professional development through formal training and peer collaboration, contributing to a culture of knowledge sharing and technical excellence. Qualifications: • Bachelor’s degree: Computer science or engineering, or equivalent experience., • 8+ years of software development and application delivery experience, • Coursework or familiarity with chemistry preferred, • Strategic thinking and strong communication and interpersonal skills. Strong team player with team spirit. Able to communicate effectively across all levels of management in a highly matrixed and/or agile environment., • Experience in leadership roles on application delivery teams, • Demonstrated passion for coding, learning, and improving craftsmanship, • Willingness to develop cross-functional skills to support the Agile team’s needs, • Demonstrated self-motivation and initiative. Able to motivate team members to be creative and efficient ., • Ability to work independently and within a matrix organization., • Ability to build relationships and influence others. Technical Experience • Java and Python development, • Spark and Scala, • Docker and Kubernetes, • Linux command line proficiency, • Experience with public cloud environments (AWS preferred), • JavaScript/TypeScript web development and popular frameworks, i.e. React, • NoSQL databases (MarkLogic strongly preferred), • Infrastructure as Code (Terraform and/or AWS CDK), • CI/CD tools (Jenkins or GitLab), • MCP or Agentic AI frameworks, • AI coding assistants (Claude Code, GitHub Copilot)

Senior Project Manager, Built Environment Location: On-site in Phoenix, AZ; Columbus, OH; or Cincinnati, OH An established, growth-focused engineering consultancy is seeking a Sr Project Manager to lead high-impact design projects within the commercial, residential, and mixed-use sectors. With a collaborative team culture and a national footprint, this firm delivers innovative solutions across public and private sectors. This role offers a prominent platform to lead architectural innovation, guide technical teams, and foster enduring relationships with key clients This Role Offers: • Strong compensation with bonus eligibility and full benefits from day one., • Leadership track with high visibility into project outcomes and team mentorship., • Access to national project portfolios spanning commercial, residential, healthcare, and institutional work., • Mentorship-focused, collaborative team culture with regular professional development opportunities., • A cutting-edge tech stack featuring leading software for building information modeling and structural design, • Equity and long-term financial planning tools, including 401(k) match and ownership pathways. Key Responsibilities: • Lead the charge as principal engineer or project lead for various structural design ventures, tackling projects of differing scopes and complexities, • Oversee the production of high-quality, code-compliant structural designs and detailed documentation., • Collaborate with architects, developers, and cross-functional engineering teams to drive project vision and structural integrity., • Manage project schedules, budgets, and technical execution, ensuring deliverables meet client expectations and performance standards., • Cultivate and maintain strong relationships with current and prospective clients, actively supporting business development., • Provide technical leadership to junior engineers and designers, offering mentorship and guidance throughout the design process., • Participate in internal quality control reviews and ensure all work adheres to relevant codes and regulations. Qualifications: • Degree in Civil or Structural Engineering required; graduate degree is a plus, • Active PE or SE licensure is required., • Strong structural engineering background, with leadership experience, • Experience in a variety of structural systems and familiarity with building codes, standards, and design methodologies., • Familiar with BIM and structural analysis tools, Revit a plus., • Demonstrated ability to lead multidisciplinary teams and manage competing project priorities., • Strong client-facing skills, with a track record of successful relationship building and project delivery. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Quality Manager Role with Industry Leader / $35.00 -$50.00 per hour depending on Experience / Great Benefits and Ability for Growth This Jobot Job is hosted by: Shawn Trainor Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $50 per hour A bit about us: We are a pioneering, global supplier of lift axles, axles, and truck and trailer suspension systems for the commercial vehicle industry. With a market focus and customer driven approach, we are committed to deliver durable products in the marketplace which are custom engineered for demanding applications. Whether a dump, mixer, bulk hauler, tanker, flatbed or logger, we invest in comprehensive research and development to help truck and trailer end users benefit from improved uptime. Why join us? Competitive Compensation Room for Growth Excellent Benefits Willing to Train Plenty of OT available Job Details Job Details: We are seeking a dynamic and experienced Permanent Quality Manager to join our leading manufacturing firm. This is an exceptional opportunity for a seasoned professional to oversee and manage the company's Quality Management Systems (QMS) and ensure compliance with ISO 13485 standards. The successful candidate will be responsible for driving continuous improvement initiatives, managing quality assurance activities, and ensuring the highest level of product quality and safety. This is a full-time, permanent position, requiring a minimum of 5 years of relevant experience. Responsibilities: 1. Oversee and manage the Quality Management Systems (QMS) in compliance with ISO 13485 standards., 2. Develop and implement quality control standards, processes, and procedures to ensure product quality and reliability., 3. Drive continuous improvement initiatives across all manufacturing processes., 4. Lead the quality assurance team in conducting regular audits, inspections, and tests to monitor product quality., 5. Collaborate with cross-functional teams to identify potential quality issues and implement effective solutions., 6. Ensure all manufacturing processes comply with local, state, and federal regulations., 7. Monitor and manage supplier quality performance and initiate corrective actions when necessary., 8. Prepare and present quality reports to senior management., 9. Train and mentor staff on quality control and improvement techniques., 10. Manage customer complaints and non-conformance issues, ensuring effective resolution and customer satisfaction. Qualifications: 1. Bachelor’s degree in Engineering, Quality Management, or related field., 2. Minimum of 5 years of experience in a quality management role within the manufacturing industry., 3. Proven experience with Quality Management Systems (QMS) and ISO 13485., 4. Strong knowledge of manufacturing processes, quality control, and continuous improvement techniques., 5. Excellent leadership and team management skills., 6. Strong problem-solving abilities and attention to detail., 7. Exceptional communication and presentation skills., 8. Ability to handle multiple tasks and projects simultaneously., 9. Proficiency in using quality control software and tools., 10. Certified Quality Engineer (CQE) or Certified Quality Manager (CQM) will be a plus. This position offers a unique opportunity to contribute to our company's growth and success while ensuring the highest levels of product quality and safety. If you are a dedicated and experienced quality manager with a passion for excellence, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Locations US-OH-Columbus Requisition ID 2026-12090 Category Project Engineering Are you looking for a highly rewarding opportunity that provides extensive career growth opportunity? Gilbane is seeking a Field Engineer II to be responsible for learning all roles and responsibilities of the Project Engineer and Superintendent function, and leveraging training within the field for hands on experience. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are someone who acts inclusively, showing empathy and treating others with respect and dignity in order to uphold Gilbane's core value of Caring and "People First" workplace culture. You seek to listen in order to understand and can convey information clearly. You're a strong problem solver who can identify, prioritize, and implement alternatives for solutions, and you demonstrate adaptability by collaborating with others and supporting team members to achieve excellence. A self-starter who shows passion, commitment, and ownership all while delivering on business outcomes and driving results. You're someone who identifies opportunities for new and improved ways of doing things that result in value-add solutions. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources. While managing your responsibilities to projects, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, you would work with an experienced team which provides you with the opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. Partners with other Engineers, Project Managers and/or Superientdents to coordinate and distribute all project information • Works with the project team to ensure all contract documents, including logs are up to date in real time, • Ensures status reports on RFIs, submittals and other documents are prepared and presented, • Creates PCIs in CMiC, issues RFQs and reviews quotes from trades, assists in preparation of ATP and OCOS, • Participates in reviewing scopes of work for bid packages, • Maintains the Material Equipment Status Report, • Develops the submittal register, • Prepares change management reports, estimates and other cost report documents, • Conducts and manages quality control activities; ensures activities are documented properly and corrective action occurs, when necessary, • Reviews contractors' startup documents (safety startup submittals, contract compliance, etc.), • Works with Lead Superintendent for trade contractor responsibilities throughout project, • Enforces Gilbane's high safety standards, • Manages and performs weekly safety inspections, • Participates in Schedule Updates and Pull Plans, • Works collaboratively with field team to ensure milestone dates are met, • Coordinates and manages general conditions work and project logistics, • Communicates with Trade Contractors and AE on field and QAQC related questions, • Prepares and contributes to daily reports, • Provides input and suggestions for trade contractor weekly meetings, • Communicates with Site Services/ Next150, orders material, and understands workforce needs, ensures clean jobsite, • Assists with Time and Materials (T&M) process, • Participates in stretch and flex, daily huddle, and reviews pre-task plans, • May be required to assist with tasks typically assigned to more junior positions, • Bachelor's or Master's degree in Engineering or Construction Management, • 1-2 years of experience or internships with a construction organization, • Some knowledge of commercial/institutional construction project, • Excellent problem solving skills and ability to adapt to changing needs, • Knowledge of Procore, • Good capabilities in Microsoft Office programs, • Strong technical and communication skills are critical, • OSHA 30 hour certification required, • First Aid, CPR Trained, • Construction-document and drawing literate, • Ability to work in a team environment Salary to be determined based on factors such as geographic location, skills, education, and/or experience of the applicant, as well as the internal equity and alignment with the team. For Ohio this ranges from $72,900-$95,000 plus benefits and retirement program. Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames isan employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top65 general contractor. The Project Engineer supports the planning, coordination, and execution of heavy highway and civil construction projectsatAmesConstructionto ensure work is performed safely, efficiently, and in compliance with contract requirements. This role works closely with project management, field supervision, subcontractors, and inspectors to deliver high-quality infrastructure projects, including roadways, bridges, and other civil structures. KeyResponsibilities * Assistin the planning, coordination, and execution of construction activities to support project schedules and budgets * Design, review, and implement temporary works and construction means and methods with a strong emphasis on safety * Inspect installed work, equipment, and materials;identifyissues and coordinate corrective actions as needed * Provide on-site direction and technical support toforemen, crews, and subcontractors * Monitor project progress and prepareaccuratedaily reports, quantities, and documentation * Perform quality control inspections to ensure workcomplies withcontract documents, plans, and specifications * Verify materials and workmanship meet project requirements and approved submittals * Enforce safety policies, OSHA regulations, and proper use of PPE on the job site * Support project cost tracking, schedule updates, and coordination with project stakeholders * Assistwith communication between the field, project management, owners, and inspectors Qualifications * Bachelor's degree in Engineeringor a related engineering discipline * Minimum of one (1) year of experience as a Project Engineer, Field Engineer, or similar role in heavy civil or highway construction * Strong understanding of construction methods, equipment, and materials used in civil infrastructure projects * Working knowledge of OSHA regulations and job-site safety practices * High attention to detail with strong organizational skills * Excellent written and verbal communication skills * Proven analytical and problem-solving abilities * Ability to work extended hours, including early mornings, nights, weekends, and occasional holidays, asrequiredto meet project schedules Working Conditions * This projectislocatedinColumbus,Ohio.Subsequentprojects will be nationally based. * Travel between job sites may be required depending on project location. * Work is primarily performed on activeconstructionjob sites, including highways, roadways, and heavy civil infrastructure projects. * Regular exposure to outdoor weather conditions, including heat, cold, rain, wind, and dust. * Position requires walking, standing, climbing, bending, and lifting in a construction environment. * Frequent interaction with heavy equipment, moving machinery, traffic, and construction hazards; strict adherence to safety protocols isrequired. * Use of personal protective equipment (PPE) is mandatory at all job sites. People are the most important asset at Ames Construction. Ames' non-craft benefits package is designed so that our team members flourish, with medical, dental, and vision (all at one low premium), voluntary benefits, generous retirement benefits, and company holidays and paid time off. Please see the Benefits section of our Careers page for more information. This job description is not designed to cover orcontaina comprehensive listing of activities, duties or responsibilities that arerequired ofthe employee for this job. Duties,responsibilitiesand activities may change at any time with or without notice. Ability to pass a pre-employment drug test isrequired Ames Construction is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Locations US-OH-Columbus Requisition ID 2025-11132 Category Superintendent Are you looking for a highly rewarding opportunity that provides extensive career growth opportunity? Gilbane is seeking a Senior General Superintendent to be responsible for managing all field operations on one or more large projects. This position will be on the job site every day and will fill a key role on the project team. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are a coach/leader who leads with an inclusive and empathetic mindset. You provide feedback and guidance to help others excel in their current or future roles. You determine priorities, delegate work, and effectively communicate progress. You establish measures to assess the impact, quality, and timeliness of results while praising successes and sharing lessons learned. You build high performing teams by attracting, engaging, developing, and retaining talented individuals through motivation and discipline to maximize impact on the organization and the individual. You leverage business insights by understanding industry trends, local market/economic conditions, and Gilbane's business model to make critical decisions and create competitive advantage. You deploy a strategic mindset when considering solutions to long-term opportunities and risks that may develop in the future. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources. While managing your responsibilities to projects, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, you would work with an experienced team which provides you with the opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. Directs and coordinates Gilbane's trade contractors and their sub-contractors, to ensure high-quality work that meets the approved project schedule • Supervises and develops the project team, • Manages the project budget for general conditions and Next 150/Site Services, • Develops, documents, and communicates the work plan regarding changes made in the field, • Leads site walks with the owner, architect/engineer, and financial institutions to show construction progress, • Maintains a thorough understanding of contract documents in order to coordinate trades, plan ahead, and proactively anticipate potential problems, • Obtains or verifies that subcontractors obtain all necessary permits for construction purposes, • Follows-up with the appropriate Authorities Having Jurisdiction (AHJ) to schedule and complete necessary inspections, • Acts as primary safety representative in the field, monitoring safety performance and verifying safety compliance with all trades, • Develops safety strategies and drives safety culture across all project personnel, • Conducts maintenance and planning of "workarounds," shutdowns and tie-ins, • Leads contractor meetings, • Accountable for review, completion, and accuracy of daily reports, • Communicates schedule status, updates, and changes to project team and trade contractors, • Coordinates and manages jobsite logistics, • Develops the Quality in Construction (QIC) plan in partnership with the Operations Excellence team, oversees the plan and implements necessary changes, • Resolves jurisdictional disputes with support of Business Unit (BU) leadership, • Establishes credibility among owners, trade contractors, unions, and other project partners by maintaining a fair and trustworthy environment, • Manages Next 150/Site Services material and crew needs, • Mentors and develops junior project team members on project needs, construction knowledge, and business acumen, • Actively engages or leads the Superintendent peer group, • Leads technical trainings for continued education, • Participates in business development, project pursuits, and preconstruction needs, including writing scopes of work and participating in buyout, • Administers Time and Materials (T&M) tracking, • Leads or delegates stretch and flex, and daily huddle, • Leads and develops ground up construction with foundation experience, • Engages in the community, growing and fostering relationships in the local market, • Partners with business development to ensure seamless integration with sales strategies, client capture plans and account plans. Optimizes profit levers and gross profit margin tactics to achieve performance targets on new sales. Leads opportunities to strengthen client, partner, and industry relationships that help position Gilbane as the "Builder of Choice", • Responsible for the career development and coaching of team members, • Fosters a positive and inclusive work environment to motivate and engage team members, • Interprets and translates the organizational strategy, ensuring team understanding of their role in accomplishing strategic goals, • Leverage Business Insights - Understand and act on industry trends, local market and economic conditions and our business model to make decisions and create competitive advantage., • Deploy a Strategic Mindset - Take a broad, global perspective when considering proactive solutions to long-term opportunities and risks that might develop in the future., • Display Emotional Intelligence - Demonstrate the capacity to recognize feelings and patterns of behavior and those of others. Manage emotions effectively in ourselves and our relationships., • Build High Performing Teams - Attract, select, develop, recognize, and retain talented individuals. Utilize motivation and discipline to maximize performance and impact on the organization., • Drive Team Accountability - Determine priorities and delegate work; monitor and communicate progress. Establish measures to assess the impact, quality and timeliness of results; praise success and learn from mistakes., • BS or MS degree in Engineering or Construction Management, • 15+ years of experience on $100+ million healthcare, institutional or advanced electronics projects, • Strong technical and communication skills, • Excellent organizational skills, • Excellentproblem solvingskills and ability to adapt to changing needs, • Must possess the ability to participate in sales process, interviews and presentations., • Ability to work in a team environment, • Proficient in Microsoft Office, Procore, • Construction-document and drawing literate, with knowledge of all phases of construction, • Experience and proficiency in all divisions of work, methods, materials, scheduling, and cost control, • Strong knowledge and appreciation of construction safety processes and ability to enforce the project safety plan, • Ability to create an environment where "safety first" is the culture and all trades people work with an incidentand injuryfree attitude, • Experience supervising a project team, • Knowledge of labor relations For Columbus, OH, this ranges from $141,000-$195,000. Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

Position & Office Overview As a Geotechnical Department Manager, you strive to lead both your team and your profits. You have extensive experience both out on the field as well as handling the "business" side of geotechnical engineering. Engineers, technicians, and project managers look to you for mentoring both technically and in building client relationships. You know how to set the bar high and not only achieve that goal yourself - but bring others along with you. You are extremely hard working and strive to ensure that your team delivers the best quality. You get the "big" picture and want to contribute accordingly - and that's why you'll have all the opportunity for career growth within our company you'll want. Responsibilities ECS Limited is seeking an experienced Geotechnical Department Manager to lead our geotechnical engineering team in our Columbus office. In this critical role, you will manage projects and staff, oversee quality control and technical standards, contribute to business development, and help drive overall department success. Responsibilities: • Manage the full lifecycle of geotechnical engineering projects., • Lead a team of geotechnical engineers, geologists, project managers, and technicians., • Ensure projects adhere to geotechnical engineering best practices, safety standards, and quality control procedures., • Perform technical review of proposals, reports, and calculations., • Track department budget, revenue, forecasts, and financial performance., • Set goals for the geotechnical group and develop staff skills through training initiatives., • Assist senior staff with business development efforts through community involvement and client engagement., • Promote company values, positive culture, and high employee engagement. #LI-BP1 Qualifications Required Experience & Skills: • 10+ years of experience in civil/geotechnical engineering., • Demonstrated leadership, communication, and relationship-building skills., • Extensive technical knowledge of geotechnical engineering concepts and applications., • Proven track record of managing budgets, forecasts, and P&L responsibilities., • Business development experience engaging clients and winning projects., • Knowledge of geotechnical conditions and construction industry. Required Education & Certifications: • BS in Civil Engineering or Geological Engineering from an ABET accredited college/university. Preferred Education & Certifications: • MS in Civil Engineering with geotechnical emphasis preferred., • The following US Military ranks will qualify for this position IF they also meet the education, certification, and licenses requirements from the above section titled "Required Qualifications":, • E-6/E-7/O-2/O-3 About Us ECS Group of Companies (ECS) was founded in 1988 with the goal to raise the standards of professional engineering consulting. Today, we are a leader in geotechnical, construction materials, environmental and facilities consulting services. We are employee-owned with more than 3,000 employees in 100+ offices and testing facilities coast to coast. ECS is currently ranked #66 in Engineering News-Record's Top 500 Design Firms (April 2025), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). For additional information about ECS, visit: ___ ECS is an Equal Opportunity Employer. To learn more, click___.

Project Engineer Who is IC? Independence Construction is expanding our Columbus, OH team! We are looking for passionate individuals to grow with us. Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner’s approach to projects through the company’s work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. As a Project Engineer, your key responsibilities are to assist the project manager and/or superintendent in one or more aspects of a construction project. • Coordination with Subs, vendors, suppliers, and Independence Construction project team., • Administer and monitor compliance with construction contracts with Owners, subcontractors and vendors., • Coordinate and expedite materials and services for the job site, in conjunction with superintendent., • Schedule and manage meetings throughout each phase of construction and preconstruction., • Assist the PM with the management of Project Budget, Budget Revisions, Cost Projections, and Cash Flow Projections. Assist with the generation of reports., • Review and coordinate structural, architectural and MEP drawings throughout the project., • Assist PM in the oversight and management of change management processes., • Collect and analyze the trade contractor proposal for scope changes., • Review and negotiate the cost for the change in scope to ensure the pricing is accurate and fair for the change in work., • Log the change management to the correct cost codes., • Issue the subcontract change order upon approval of the change by Owner and PM., • Responsible for the entire RFI process (initiate, review the response, maintain a log and distribute to team as appropriate., • Responsible for the entire submittal process (initiate, review the submittal, maintain a log and distribute to team as appropriate upon approvals., • Responsible to keep accurate and current at all times the drawing log, submittal log, and RFI log., • Coordinate all project meetings with PM and Superintendent prior to the start of project., • Attend Owner / Architect / CM (Contractor) meetings., • Collect, review and process subcontractor payment applications as assigned by the PM. Assist in compiling owner payment applications., • Assist the Superintendent and PM as requested in creating and updating the Master Schedule., • Quality Control and Quality Assurance - Work with the team (PM, PX, Supt.) for the development of the project QA/QC program., • Assist PM and Superintendent with Close-out process., • Assist with the preliminary punch list process., • Coordinate owner-requested warranty requirements during the warranty period. Do you have what it takes? • Bachelor’s degree in construction management or engineering or equivalent combination of education and experience., • 1-3 years of previous related experience is required, • Strong written and oral communication skills., • Knowledge of budgeting and expense control., • Able to write reports, and business correspondence., • Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines., • Able to perform duties independently., • Computer skills: Microsoft Office applications. Excellent Benefits: • Weekly Competitive Pay!, • Medical, • Dental, • Vision, • FSA & HSA, • Life Insurance + Optional Family Life Insurance, • Short-term and Long-term Disability, • Wellness Incentive Program, • Paid Holidays and PTO, • 401(k) + Company match, • Paid corporate training program, • Tuition Reimbursement, • Stability and a variety of different roles that provide a path to career advancement, • Family-owned and operated since 1956

Job Description Pay range: $30 - $35 per hour, based on experience GFS Chemicals has been a family owned and operated business in Columbus, Ohio, and serving customers worldwide since 1928. Every role in the organization is important and is tasked with meaningful work that impacts the success of some of the world’s great companies. You will be joining an established yet close knit family organization that has been proudly dedicated to quality, service, and innovation in the fine and specialty chemicals market worldwide for nearly 100 years. In addition to a supportive and compassionate culture, GFS offers a comprehensive total compensation and benefit package, intentional in its design to reward your ongoing commitment to the organization. This includes a generous 401k, Profit Sharing Plan, Health Savings Account (HSA) 2:1 Match, Paid Time Off, Company Paid Life Insurance and Accidental Death and Dismemberment, Medical, Vision, Dental Insurance, and much more. Apply now to learn more about GFS Chemicals. Let’s see if we have “Chemistry!” About the Job We are currently seeking a Maintenance Technician Lead to join our GFS Chemicals family at our McKinley Avenue campus in Columbus, Ohio. This is a leadership role responsible for leading complex maintenance projects, mentoring junior staff, and ensuring optimal operation of all facility systems. The Maintenance Technician Lead performs a variety of maintenance duties to reduce and prevent equipment down time, help with equipment installations, maintain building facilities, grounds upkeep, and drive continuous improvement in reliability and plant uptime. This role is responsible for performing preventative maintenance tasks as well as more complex maintenance and repair tasks with minimal supervision. Responsibilities • Lead day-to-day maintenance operations, • Lead troubleshooting and repair of advanced mechanical and electrical systems, • Work with Maintenance Engineer/Planner to oversee execution of maintenance projects and upgrades, • Escalates personnel issues to Maintenance Manager, • Help to develop programs as well as train and mentor lower-level technicians, • Ensure compliance with safety regulations and maintenance standards, • Collaborate with engineering and operations teams to improve system reliability with focus on continuous improvement, • Commitment to house keeping, • Manage on-site contractors, • Utilize CMMS systems, • Track work orders and maintenance activities, • Perform root cause analysis on equipment failures, • Identify improvements to increase equipment reliability, • Responsible for constant, productive communication between maintenance and engineering managers to improve overall work and team efficiency., • Responsible for making day-to-day decisions in the field with limited management guidance where appropriate. Requirements • High school diploma or equivalent, • Associate or Bachelor’s Degree preferred, • 7+ years of maintenance experience in an industrial or commercial setting preferred, • 2+ years leadership or supervisory experience preferred, • Professional certification in one or more relevant technical areas is required (electrical, pneumatic, hydraulic, mechanical trades, boilers, etc.), • Experience in chemical, pharmaceutical, petrochemical, or similar processing environment preferred, • CMMS experience (eMaint preferred), • Advanced knowledge of mechanical, electrical, and control systems, • Ability to work independently, prioritize tasks, and provide direction to others, • Strong leadership and project management skills, • Proven ability to train staff, • Proven decision-making capabilities Additional Qualifications The company will only employ those who are legally authorized to work in the United States for this position. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future are not eligible for hire. EEO/AA/M/F/VETS/Disabled No agency calls or emails, please!

Ames Construction has been building America for more than 60 years, and the people who work here are thereasonwe continue to succeed. We are a full-service,heavy civil and industrial contractorbuildingcritical infrastructure, includinghighways, bridges, mines,dams,rail, andmore.Ourteams take on challenging projects that keep communities safe, supply chainsmoving,and the country connected. At Ames, we areFueled by FamilyandDriven by Ownership. That means welook outfor one another, take pride in what we build, and take responsibility for our actions, our results, and the long-term health of the company. Guided by our core values ofPeople, Team, Our Bond, Persistence, and Vision, we do what we say we will do, push throughchallengesand deliver workwe'reproud of. When you join Ames,you'rejoining a company built for long-term success-where skilled people, strong teams,and disciplined execution come together to build careers and a better future. Please note: Visa sponsorship is not available at this time for this position. The Field Engineer is responsible for managing large and complex construction work at the project site to ensure operations run safely, smoothly, and effectively. This position has a wide range of job responsibilities, depending on the area of specialization. These duties might include working on road, bridge, building, steel structures, or other large projects. This position is classified as "safety-sensitive." Essential Functions • Designs temporary structures used during construction with emphasis on safety considerations, • Inspects installed equipment and technologies. Solves issues that may arise., • Directs foremen or workers on-site, • Conducts research and accurately reports on project status, • Performs quality control inspections and checks work for compliance with contract documents, • Verifies proper materials are used, and that the installations meet project timelines and requirements, • Affirms safety compliance and enforces proper protocols and PPE on site, • May oversee project budget and communications Qualifications • A Bachelor's degree in Engineering or closely related field, • A minimum of one (1) year of previous experience as a field engineer or similar role, • Well-versed in technical aspects of field projects, including machinery, equipment, and construction processes, • Thorough understanding of safety guidelines (OSHA statutes), • Attention to detail, • Outstanding communication skills, • An analytical mind and strong problem-solving ability, • Ability to work in adverse weather and occasional overtime and weekends Working Conditions • Travel - This role will be expected to travel to project locations, sometimes nationally, • Construction site environment - physical ability to stand, walk, crawl, bend, reach and climb. May be exposed to high noise levels., • Compensation: $55,000-$75,000 Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

GAI Consultants is looking for an Electrical Engineering Manager to support our Power and Industry Business Sector. This person will serve as an electrical engineering group manager and project manager for multi-discipline projects for industrial, power, utility, government, health care, educational, and commercial clients. #Remote This position requires technical and management skills as well as client relation skillsets and acting as the overall Project Manager for multi-discipline projects within GAI (such as mechanical, electrical, process, civil, structural, and geotechnical engineering) and directs the electrical tasks, including delegation of tasks to engineering/drafting staff, preparation and checking of calculations, drawing development, preparation of deliverables, and budget tracking. Project work includes new construction, modification projects, condition assessment/rehabilitation, and feasibility studies. Projects include the traditional Time and Expense, Design/Bid/Build delivery method, as well as Owner's Engineer Services and Design/Build. Job description: • Direct and manage the performance of electrical analysis/design and preparation of drawings and specifications per engineering standards and applicable codes., • Provide leadership, coaching and/or mentoring to the electrical group, • Project management responsibilities including delivering scope, schedule, budget, quality, safety and profitability of all projects managed. Plans and manages small to medium value projects and multiple projects at one time. works closely with Project Accounting to monitor and control project cost and billings to meet budget profit, to analyze project performance data and to develop recovery plans as needed., • Generate new work for the business sector through client outreach., • Proposal preparation including scope and budget development and interdisciplinary coordination, • Draft site reports, design narratives, meeting minutes, and project memorandums., • Collaborate with other engineering leads for resource and schedule management, the performance of QA/QC peer reviews, and staff mentorship., • Independently conduct field condition assessments., • Performance of bid and construction phase services including responding to bidder questions, responding to Contractor Requests for Information, and submittal reviews, site visits, and verifying change order documentation., • Perform projects that are managed by other engineering leads., • Have the ability to lift 50 lbs., able to climb ladders, work at heights over 25 ft., • Must be able to wear and work in Personal Protection Equipment including fall protection., • Physically capable of performing field visits to client sites to obtain photos, physical measurements, and view site conditions., • Ability to work independently and direct/oversee engineering and drafting staff on a project basis. General Characteristics • Applies thorough knowledge of current principles and practices of engineering related to the variety of aspects affecting their practice., • Applies progressively acquired expertise to resolve crucial issues and/or unique conditions., • Keeps informed of new methods and developments affecting their practice and recommends new practices or changes in emphasis of projects., • Leads projects of moderate complexity and scope or leads a major project., • Analyzes complex problems across specialty areas appropriate to the practice of engineering., • Predominantly serves as the technical advisor for the practice in the application of advanced concepts and methods in an assigned area., • Keeps informed of new developments and requirements affecting the practice for the purpose of recommending changes in projects or applications., • Predominantly develops new techniques and/or improved processes, materials, or products., • Predominantly plans, schedules, and coordinates the preparation of documents or activities for multiple major projects or is responsible for an entire project of a practice., • Analyzes project management plans for complex engineering projects., • Understands project delivery uncertainties and uses risk management principles to address them., • Reviews operational procedures to ensure compliance with applicable policies and performance measures., • Supervises a staff of engineers and technicians., • Receives administrative supervision with assignments given in terms of broad general objectives and limits., • Provides continued mentored experience to senior staff., • Applies principles of formal strategic and persuasive communications., • Represents their area of specialty within the practice and liaises with related individuals and practices., • Routinely interacts with practice leaders, clients, officials, contractors, and others. At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits of working at GAI include: • Competitive salary -GAI is committed to paying market-based salaries, • Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability and Short-Term Disability (benefits start within 30 days of hire), • New paid Maternity/Paternity/Adoption program, • Generous Paid Time Off and 7 paid holidays, • 401k company match, • Tuition Reimbursement #INDHP EducationBachelors of Electrical Engineering (required) Experience10 years: Heavy industrial, oil & gas, power, chemical, commercial or related industries. Demonstrates sales experience in acquiring new clients, developing/maintaining existing clients. (required) 8 years: Managing technical staff and performing duties such as hiring, budgeting, employee performance, and compensation reviews, creating a group and department goals (required) Licenses & CertificationsProfessional Engineer (required) Driver's License (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

GAI Consultants has a career-building opportunity for an Assistant Engineering Manager within our Power Business Unit's Civil and Environmental Engineering Business Sector. GAI is an established multi-disciplined engineering firm with tremendous growth opportunities in Ohio, West Virginia, Virginia, Maryland and Pennsylvania. The successful candidate will enjoy working in a challenging, fast-paced, and team-oriented environment that will utilize their related experience to develop professionally and grow in today's global environment. This position is Hybrid, can be a fully Remote position for the right candidate. GAI's Power Business Unit focuses on developing and supporting Energy, Institutional, Industrial, and Manufacturing clients. As an Assistant Engineering Manager at GAI, you will have the opportunity to manage civil engineering and permitting tasks, delegate and provide direction to engineering/drafting staff, and lead and review the development of calculations, drawings, and associated project deliverables. You also will develop proposals and monitor budgets. Communication skills are essential to this position, as an Assistant Engineering Manager will need to effectively coordinate with internal and external clients as well as their Engineering Division Manager, Business Sector Leader, and other engineering discipline leads (such as mechanical, electrical, process, environmental, and geotechnical engineering). #INDHP Job Duties: • Plans, designs, and facilitates civil engineering project design tasks such as site grading and drainage design; access road design; erosion and sediment pollution control design; stormwater management design; report preparation; and permitting., • Task management duties include being in responsible charge of technical work, staff planning, budget/schedule management, scope change management, quality assurance/peer reviews, report writing, staff mentorship, and client coordination., • Proposal preparation including the scope and budget development and interdisciplinary coordination., • In addition to proposal preparation, written communication may include the preparation of site reports, narratives, meeting minutes, and project memorandums., • Collaborate with other engineering leads to schedule resource and QA/QC peer reviews., • Independently conduct field condition assessments., • Performance of bid and construction phase services including responding to bidder questions, responding to contractor requests for information, and submittal reviews, site visits, and verifying change order documentation., • A current, valid driver's license is required., • Professional Engineering License preferred. P.E. license in multiple states is a plus., • Applies thorough knowledge of current principles and practices of engineering related to the variety of aspects affecting their practice., • Applies progressively acquired expertise to resolve crucial issues and/or unique conditions., • Keeps informed of new methods and developments affecting their practice and recommends new practices or changes in emphasis of projects., • Leads projects of moderate complexity and scope or leads a major project., • Analyzes complex problems across specialty areas appropriate to the practice of engineering., • Occasionally serves as the technical advisor for the practice in the application of advanced concepts and methods in an assigned area., • Keeps informed of new developments and requirements affecting the practice for the purpose of recommending changes in projects or applications., • Occasionally develops new techniques and/or improved processes, materials, or products., • Occasionally plans, schedules, and coordinates the preparation of documents or activities for multiple major projects or is responsible for an entire project of a practice., • Analyzes project management plans for complex engineering projects., • Understands project delivery uncertainties and uses risk management principles to address them., • Supervises a staff of engineers and technicians., • Receives administrative supervision with assignments given in terms of broad general objectives and limits., • Provides continued mentored experience to senior staff., • Applies principles of formal strategic and persuasive communications., • Represents their area of specialty within the practice and liaises with related individuals and practices., • Routinely interacts with practice leaders, clients, officials, contractors, and others. At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: • Competitive salary -GAI is committed to paying market-based salaries, • Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire), • New paid Maternity/Paternity/Adoption program, • Generous Paid Time Off and 7 paid holidays, • 401k company match Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Battelle delivers when others can't. We conduct research and development, manage national laboratories, design and manufacture products and deliver critical services for our clients-whether they are a multi-national corporation, a small start-up or a government agency. We recognize and appreciate the value and contributions of individuals from a wide range of backgrounds and experiences and welcome all qualified individuals to apply. Job Summary Battelle's Defense and Material Solutions Business Unit is currently seeking a Maritime Electrical Engineer. This position is located at Columbus, OH. We are seeking experienced maritime electrical engineers who have successfully designed and integrated electrical systems in maritime environments. The person selected for this position will be responsible for the design, development, test, and production of complex electronic and electro-mechanical systems for use in maritime environments. The person filling this position will be expected to be able to work independently or function as part of a technical team which may be composed of engineers, technicians, and support staff. This person will lead tasks such as designing electrical schematics, writing embedded firmware, compiling and evaluating design and test data, and preparing technical specifications. The person will be capable of finding solutions and answers beyond their area of expertise. Assignments may involve research for device and technology development; the design, build and integration of hardware and software components for computing systems and networks; and development of specifications for assigned system components. Responsibilities \n • Design innovative electrical solutions for maritime systems\n, • Shape system architecture through concept generation, requirements definition, and test planning\n, • Collaborate hands-on with technicians in lab assembly and testing to validate and refine designs\n, • Accountably lead and manage tasks within budget and schedule, partnering with program managers\n, • Support proposal development and capture management for government contracts\n, • Communicate technical results and project progress to leadership and customers, both verbally and in writing\n, • Mentor and coach junior staff\n, • Contribute to Independent Research and Development (IR&D) studies\n \n • Proven experience designing electrical components and subsystems for maritime environments\n, • Bachelor's degree from an ABET accredited electrical/computer engineering program with 3-5 years of experience OR master's degree in a related field with 1-4 years of experience OR PhD in a related field\n, • Candidate must be a U.S. Citizen with ability to obtain and maintain a government security clearance at the TS/SCI level\n, • Experience with underwater systems\n, • Physically fit to accomplish required tasks including working from ladders and in confined spaces\n, • Ability to work independently and as part of a team\n, • Positive attitude, good character, and eagerness to take on technical challenges\n, • Excellent verbal and written communication and interpersonal skills\n \n • US citizenship with active DOD Level 5 Top Secret (TS) clearance\n, • Master's and/or PhD in a related field (i.e. Electrical/Computer Engineering, Ocean Engineering, Physics, etc.)\n, • Significant mathematical background - math courses or related engineering courses such as control systems, signal processing, etc.\n, • Experience with fiber optic interfaces in harsh environments and optical network design\n Work Environment: Flexible hybrid model; majority in-office in Columbus, OH. Benefits: Live an Extraordinary Life We care about your well-being, not just on the job. Battelle offers comprehensive and competitive benefits to help you live your best life. \n • \nBalance life through a compressed work schedule: Most of our team follows a flexible, compressed work schedule that allows for every other Friday off-giving you a dedicated day to accomplish things in your personal life without using vacation time.\n, • \nEnjoy enhanced work flexibility, including a hybrid arrangement: You have options for where and when you work. Our Together with Flexibility model allows you to work 60% in-office and 40% remote, with Monday and Tuesday as common in-office days, dependent on team and position needs . \n, • \nTake time to recharge: You get paid time off to support work-life balance and keep motivated.\n, • \nPrioritize wellness: Stay healthy with medical, dental, and vision coverage with wellness incentives and benefits plus a variety of optional supplemental benefits.\n, • \nBetter together: Coverage for partners, gender-affirming care and health support, and family formation support.\n, • \nBuild your financial future: Build financial stability with an industry-leading 401(k) retirement savings plan. For most employees, we put in 5 percent whether you contribute or not, and match your contributions on top of that. \n You will have the opportunity to thrive in a culture that inspires you to: \n • Apply your talent to challenging and meaningful projects \n, • Receive select funding to pursue ideas in scientific and technological discovery\n, • Partner with world-class experts in a collaborative environment\n, • Nurture and develop the next generation of scientific leaders\n Battelle may require employees, based on job duties, work location, and/or its clients' requirements to follow certain safety protocols and to be vaccinated against a variety of viruses, bacteria, and diseases as a condition of employment and continued employment and to provide documentation that they are fully vaccinated. If applicable, Battelle will provide reasonable accommodations based on a qualified disability or medical condition through the Americans with Disabilities Act or the Rehabilitation Act or for a sincerely held religious belief under Title VII of the Civil Rights Act of 1964 (and related state laws). Battelle is an equal opportunity employer. We provide employment and opportunities for advancement, compensation, training, and growth according to individual merit, without regard to race, color, religion, sex (including pregnancy), national origin, sexual orientation, gender identity or expression, marital status, age, genetic information, disability, veteran-status veteran or military status, or any other characteristic protected under applicable Federal, state, or local law. Our goal is for each staff member to have the opportunity to grow to the limits of their abilities and to achieve personal and organizational objectives. We will support positive programs for equal treatment of all staff and full utilization of all qualified employees at all levels within Battelle. The above statements are intended to describe the nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, activities and skills required of staff members. No statement herein is intended to imply any authorities to commit Battelle unless special written permission is granted by Battelle's Legal Department. For more information about our other openings, please visit

Job Description Senior Quality Assurance Engineer The GEE Group has partnered with a tier one leader in the automotive equipment industry and offering a great opportunity for an experienced Quality Assurance Engineer. This direct-hire opportunity is ideal for someone well-suited to take ownership of a fast-paced work environment and being challenged. Responsibilities: • Ensuring component part dimensions pass specification testing with the use of CATIA and CMM., • Provide assistance with in house testing and material approvals., • Improving operations by reviewing and reporting reasons for suppliers’ decline or improvement in ratings., • Evaluating and addressing budgetary concerns., • Overseeing customer complaints, ensuring timely problem solving and cost-effectiveness., • Review new model start up process to prevent molding and assembly issues., • Prepare new model paperwork; PQCT, SAP, NMR, etc. Qualified Candidates: • Bachelor's degree in engineering or related field or equivalent experience, • Plastic injection molding experience preferred, • Working experience with CATIA, • Experience with PPAP & PFMEA, • Demonstrated knowledge of quality control techniques and processes, • Knowledge of ISO 9000 and AIAG standards

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team's full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos' engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients' most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor's degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world's toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. November 3, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description Leidos is seeking a Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. Engineers at this level will focus on independent execution of technical tasks using tools like PLS-CADD and PLS-POLE and will contribute to the quality control process. This will involve working with a multi-person Leidos team and supporting clients, project planning, environmental, permitting, and construction management personnel. Work Locations:Ideal candidates will be located in Michigan, Ohio, West Virginia, Maryland, Pennsylvania, & New Jersey working a hybrid schedules. Fully REMOTE positions are available for qualified candidates.Relocation assistance will be provided to those able to relocate within a commutable distance to Walled Lake, MI or Cranberry Township, PA. The Challenge: • Execute technical design and engineering tasks related to high-voltage transmission lines, ensuring compliance with all applicable codes and standards., • Prepare and review technical drawings, specifications, and calculations under the guidance of Lead Engineers or Project Managers., • Perform engineering analyses, including PLS-CADD modeling and structure loading calculations., • Contribute to the team's continuous improvement goals by learning and applying new technical tools, AI, and automation platforms., • Actively communicate and coordinate project progress with the Project Manager (PM) to ensure awareness of and adherence to project schedule and budget. (This directly incorporates your PM/Schedule change.), • Maintain strong technical proficiency in industry-standard software and Leidos design processes. Required Education & Experience: • Bachelor's in Civil, preferred, or Mechanical Engineering with two plus (2 +) years of relevant experience in the design of electric utility transmission systems., • Experience using PLS-CADD and PLS-POLE., • Work effectively in team environment; can also work independently., • Strong interpersonal and written communication abilities, with a focus on effective collaboration across client and project teams., • Work in client office is a possibility and/or periodic travel may be required. Desired Experience: • Experience with TOWER is a plus, • EIT or PE certification is desirable, • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world's toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. February 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Description Leidos is seeking a Senior Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Senior Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. Engineers at this level will focus on independent execution of technical tasks using tools like PLS-CADD and PLS-POLE and will contribute to the quality control process. This will involve working with a multi-person Leidos team and supporting clients, project planning, environmental, permitting, and construction management personnel. Work Locations:Ideal candidates will be located in Michigan, Ohio, West Virginia, Maryland, Pennsylvania, & New Jersey working a hybrid schedules. Fully REMOTE positions are available for qualified candidates.Relocation assistance will be provided to those able to relocate within a commutable distance to Walled Lake, MI or Cranberry Township, PA. The Challenge: • Execute technical design and engineering tasks related to high-voltage transmission lines, ensuring compliance with all applicable codes and standards., • Prepare and review technical drawings, specifications, and calculations under the guidance of Lead Engineers or Project Managers., • Perform engineering analyses, including PLS-CADD modeling and structure loading calculations., • Contribute to the team's continuous improvement goals by learning and applying new technical tools, AI, and automation platforms., • Actively communicate and coordinate project progress with the Project Manager (PM) to ensure awareness of and adherence to project schedule and budget. (This directly incorporates your PM/Schedule change.), • Maintain strong technical proficiency in industry-standard software and Leidos design processes. Required Education & Experience: • Bachelor's in Civil, preferred, or Mechanical Engineering with four plus (4 +) years of relevant experience in the design of electric utility transmission systems., • Experience using PLS-CADD and PLS-POLE., • Work effectively in team environment; can also work independently., • Strong interpersonal and written communication abilities, with a focus on effective collaboration across client and project teams., • Work in client office is a possibility and/or periodic travel may be required. Desired Experience: • Experience with TOWER is a plus, • EIT or PE certification is desirable, • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world's toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. February 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote #Featuredjob

Job Description Environmental Engineer III Greater Columbus Ohio area A Global Automotive Supplier is looking for an Environmental Engineer III to join their team. Company offers: • Medical, Dental, Vision and Life Insurance, • 401K Retirement Savings with Company Match, • Tuition Reimbursement and more Position Summary Administering the company’s Environmental Management System in compliance with all applicable laws. Monitoring, reviewing and making recommendations to the current environmental practices that allow the company to work more efficiently. Minimizing waste and protecting the environment by preventing pollution. • Provide leadership to overall company environmental management system., • Monitor and ensure compliance with all applicable Federal, State and Local Environmental regulations, statutes and permits., • Establish, maintain and nurture positive relationships and communications with Ohio EPA, Mid-Ohio, and Federal EPA., • Collect and report internal Greenhouse Gas emissions to parent company and customer., • Initiate and support Greenhouse Gas reduction activities., • Monitor and report on changes in Environmental Requirements from Federal, State and Local agencies to customer and parent company., • Advise and inform management of compliance changes and activities., • Conduct internal audits to insure compliance activity., • Support facility recycling efforts and report to parent company., • Prepare and submit environmental reports, plans and permit applications to local, state and federal agencies., • Assessing potential environmental risks and provide mitigation plans to reduce incidents, • Leading hazardous waste management and disposal activities, • Leading and implementing Carbon Neutrality projects, data collection activities and reporting of Sustainability efforts, • Developing pollution and waste control programs, • Reviewing and updating SPCC plans as needed, • Conducting timely investigations of all environmental incidents to determine root cause and implement corrective action plans., • Conducting field inspections, including such items as stormwater, spill prevention, and other environmental compliances, • Coordinating HAZCOM/SDS Program for materials used, received and/or processed at the facility. HOW YOU WILL QUALIFY: • Bachelor’s degree in environmental engineering or related field, • Thorough knowledge of permitting for air, water and land regulations, • Demonstrated ability to proactively manage company’s environmental management system and make recommendations for improvement, • Demonstrated analytical skills, • Experience with multi-location plants and 24/7 operation, • Experience with managing an EHS management system including ISO 14001, • Strong focus on behavioral safety and employee engagement, • Ability to influence up and down in an organization About CTI: Compass Tech International (CTI) is dedicated to providing the highest quality Staffing, Recruiting and Managed Services to our customers nationwide, to create greater efficiencies, better results and effective communications to improve their talent access and worker effectiveness while finding solutions for workflow and process improvement. Talk today to your Compass Tech recruiter. If the immediate job opportunities from our 100+ active client companies is not readily apparent, CTI’s team will stick with you to find the right opportunity, or guide you to improve your process to find success. And via that, a brighter career path Company DescriptionAbout CTI: Compass Tech International (CTI) is dedicated to providing the highest quality Staffing, Recruiting and Managed Services to our customers nationwide, to create greater efficiencies, better results and effective communications to improve their talent access and worker effectiveness while finding solutions for workflow and process improvement. Talk today to your Compass Tech recruiter. If the immediate job opportunities from our 100+ active client companies is not readily apparent, CTI’s team will stick with you to find the right opportunity, or guide you to improve your process to find success. And via that, a brighter career path.About CTI: Compass Tech International (CTI) is dedicated to providing the highest quality Staffing, Recruiting and Managed Services to our customers nationwide, to create greater efficiencies, better results and effective communications to improve their talent access and worker effectiveness while finding solutions for workflow and process improvement.\r\n\r\nTalk today to your Compass Tech recruiter. If the immediate job opportunities from our 100+ active client companies is not readily apparent, CTI’s team will stick with you to find the right opportunity, or guide you to improve your process to find success. And via that, a brighter career path.

Job Description Ometek Mechanical/Process Engineer Location: Columbus, OH Position Type: Full-Time Industry: Sheet Metal Fabrication / Critical Power Equipment About Us Ometek is part of a group of companies that collectively supports the design and production of critical power equipment, serving the data center industry as well as other high-reliability industrial markets. Ometek, as the sheet metal fabricator, plays a key role in producing precision components for these applications, while also serving a wide range of customers across diverse industries. This provides our team with exposure to unique engineering challenges and opportunities to work on projects with real-world impact. About the Role We are seeking a skilled and driven Mechanical Engineer to join our growing sheet metal fabrication team. This engineer will design and develop precision sheet metal components, create fabrication documentation, collaborate closely with production teams, and support continual improvement in manufacturability, quality, and efficiency. This role is ideal for someone with strong technical depth, hands-on experience, and leadership capability within a fabrication environment. Key Responsibilities • Design and Development: Create and optimize sheet metal components and assemblies using SolidWorks., • Technical Documentation: Produce detailed engineering drawings, specifications, and other documentation to support manufacturing., • Manufacturing Process: Work with production teams to refine designs for manufacturability, considering processes like laser cutting, punching, bending/forming, welding, and assembling., • Material and Cost Analysis: Select appropriate materials and conduct cost analysis for projects, if applicable., • Quality and Compliance: Ensure all products meet industry standards, safety regulations, and quality control procedures., • Problem-Solving: Troubleshoot manufacturing issues and implement solutions to improve production processes., • Technical Support: Provide technical guidance to junior engineers and production staff. Required • Bachelor’s degree in Mechanical Engineering or related field., • Prior experience with CAD software., • Basic understanding of sheet metal fabrication processes (cutting, bending/forming, welding, and assembly)., • Knowledge of material properties, metallurgy, sheet metal gauges, and structural materials., • Excellent analytical, problem-solving, and troubleshooting abilities., • Strong interpersonal and communication skills for effective teamwork., • 2 or more years of experience with CAD software, particularly with sheet metal features., • Familiarity with CNC programming., • Strong understanding of sheet metal fabrication processes (cutting, bending/forming, welding, and assembly). · Market-competitive salary/wage • 401(k), • Medical Insurance – PPO or HSA, • Dental Insurance, • Vision Insurance, • Life Insurance, • Short- & Long-Term Disability Insurance, • Paid Time Off (PTO)

Job DescriptionWe are seeking a Controls Engineer to support the development, deployment, and continuous improvement of advanced autonomous robotic welding systems. This role sits at the intersection of industrial automation, artificial intelligence, and computer vision — supporting highly flexible robotic platforms designed to operate with minimal traditional programming.This is an opportunity to work on next-generation automation systems that leverage AI to adapt to part variation, optimize weld quality, and increase manufacturing throughput. Key Responsibilities • Design, develop, and implement PLC and motion control systems for robotic welding cells, • Integrate robotics, vision systems, sensors, and AI-enabled automation platforms, • Develop and maintain HMI interfaces and system diagnostics, • Troubleshoot complex electrical and control system issues in production environments, • Support commissioning and startup of automated welding systems, • Collaborate with software, robotics, and AI teams to enhance system performance, • Create and maintain electrical schematics, I/O layouts, and control documentation, • Drive continuous improvement initiatives focused on reliability, uptime, and scalabilityRequired Qualifications, • Bachelor’s degree in Electrical Engineering, Controls Engineering, or related field (or equivalent experience), • 3+ years of experience in industrial automation or robotics controls, • Strong PLC programming experience (Allen-Bradley, Siemens, or similar platforms), • Experience integrating robotic systems (Fanuc, ABB, KUKA, or similar) Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Our Deloitte Strategy & Transactions team helps guide clients through their most critical moments and transformational initiatives. From strategy to execution, this team delivers integrated, end-to-end support and advisory services covering valuation modeling, cost optimization, restructuring, business design and transformation, infrastructure and real estate, mergers and acquisitions (M&A), and sustainability. Work alongside clients every step of the way, helping them navigate new challenges, avoid financial pitfalls, and provide practical solutions at every stage of their journey-before, during, and after any major transformational projects or transactions. SFL Scientific is a Deloitte Business that is part of our Strategy Offering, within our broader Strategy & Transactions practice mentioned above. This specialized team brings together several key capabilities to architect integrated programs that transform our clients' businesses. We are hiring a GenAI Solutions Architect to support the technical design, development, and deployment of novel AI solutions across healthcare, life sciences, manufacturing, consumer, energy, and other industries. Join us at SFL Scientific to expand your technical acumen through the lens of professional services and consulting and help create novel solutions to advance your data science & AI career. Recruiting for this role ends on 11/30/2025. Work You'll Do As a GenAI Solutions Architect, you'll work cross-functionally with data scientists, machine learning engineers, business leaders, and industry experts to develop robust AI infrastructure and deployment services for our novel applications. Key to this role is the ability to demonstrate both traditional data engineering expertise, leveraging cloud/enterprise/open-source solutions, and constructing modern IT improvements for organizations across a wide variety of industries. Key responsibilities: * Work with clients to design, architect, and implement AI-enabled solutions from inception to production deployment * Define client GenAI/AI strategy and technical architecture * Stay ahead of industry trends, evaluate new tools/features, pilot innovative solutions, and shape roadmaps for client-facing GenAI tools * Lead technical strategy and blueprinting of AI/GenAI systems, aligning solution architecture with business objectives, security, and scalability requirements * Collaborate with data scientists, engineers and domain experts to integrate AI outputs into software and product workflows * Oversee deployment of AI applications into production environments, ensuring performance optimization, model monitoring, version control and continuous improvement * Participate in architectural and deployment discussions to ensure solutions are designed for successful scale, security, and high availability in the cloud or on prem * Mentor, motivate, and coach junior members on technical best practices and inspire professional development The Team Our Strategy offering architects bold strategies to achieve business and mission goals, enabling growth, competitive advantage, technology modernization, and continuous digital and AI transformation. Specifically, SFL Scientific, a Deloitte Business, is a data science professional services practice focused on strategy, technology, and solving business challenges with Artificial Intelligence (AI). The team has a proven track record serving large, market-leading organizations in the private and public sectors, successfully delivering high-quality, novel and complex projects, and offering deep domain and scientific capabilities. We are advancing both predictive and generative AI technologies while maintaining a commitment to data-driven decision making across all levels of a client's organization, building solutions that drive growth and create meaningful impact. Made up of experienced AI strategists, data scientists, and AI engineers, they serve as trusted advisors to executives, helping them understand and evaluate new and essential areas for AI investment and identify unique opportunities to transform their businesses. In our consultative approach, we are platform agnostic and committed to providing the best technical solutions for each organization's requirements. Some of our novel use cases including supporting cancer detection, drug discovery, optimizing population health and clinical trials, autonomous systems and edge AI, and GenAI-enabled capabilities in every sector. Qualifications * Bachelor's degree in a relevant STEM field (Computer Science, Engineering, Physics, etc.) or equivalent experience * 4+ years of experience in designing and implementing cloud-native AI architectures (AWS, Azure of GCP) * 4+ years of specific technology domain areas (i.e., software development, cloud computing, systems engineering, infrastructure, security, networking, data & analytics) experience * 4+ years of programming in Python with modern packages (i.e., Docker, Kubernetes, Airflow, Kafka, etc.) * 3+ years of design, implementation or consulting in deploying AI applications with unit and integration testing in enterprise systems and supporting data pipelines, leveraging event-driven or microservices-based architectures * Live within commuting distance to one of Deloitte's consulting offices * Ability to travel 10%, on average, based on the work you do and the clients and industries/sectors you serve * Limited immigration sponsorship may be available Preferred: * Master's degree in Computer Science, Engineering or Physics, etc. or related STEM field * AWS/Azure Certifications (AWS/Azure Certified: Sys Ops Administrator, Dev Ops Engineer, Solutions Architect) * 3+ years of experience deploying AI solutions in regulated or mission-critical industries (i.e., healthcare, life sciences, finance) * 2+ years of experience applying enterprise AI governance, bias mitigation and performance optimization techniques (scaling, configuration, management) in production AI systems The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Deloitte, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $107,600 to $198,400. You may also be eligible to participate in a discretionary annual incentive program, subject to the rules governing the program, whereby an award, if any, depends on various factors, including, without limitation, individual and organizational performance. Information for applicants with a need for accommodation: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or protected veteran status, or any other legally protected basis, in accordance with applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or protected veteran status, or any other legally protected basis, in accordance with applicable law.

GAI Consultants, Inc is seeking an experienced Engineer 3 to lead our growing Bridge Engineering Group within our Ohio Transportation Business Unit. GAI has a growing contract backlog with ODOT, OTIC, and local governments and is expanding our Ohio presence. In addition to providing management and technical leadership to our Ohio bridge projects, this position requires client interaction and business development strategy for specific project opportunities. The successful candidate should also anticipate interaction and involvement with other regional projects in Indiana, West Virginia, and Pennsylvania. Remote and/or hybrid work (home or office) schedules are viable options, and the successful candidate will be eligible for a sign-on bonus. Job Duties: • Design and prepare plans, calculations, and specifications for transportation structures, including highway bridges, retaining walls, box culverts, and other miscellaneous structures per AASHTO and ODOT requirements., • Provide analysis and load rating for existing structures and recommend improvement and strengthening strategies through knowledge and application of appropriate specifications, standards, and design criteria,, • Collaborate with other professionals from various departments and disciplines and discuss requirements with clients to execute projects., • Perform work as part of a team or as a task/project manager, in accordance with the project budget and schedule limitations under moderate supervision., • Prepare engineering cost estimates, the scope of work documents, and proposals and assist other Project/Task Managers with similar duties., • Provide leadership and technical guidance to the project team to ensure quality technical services., • Monitor and enforce compliance with quality control standards and client requirements., • Participate in occasional site visits in construction sites and remote outdoor work environments., • Applies broad knowledge of principles and practices in a specific practice area., • Independently evaluates, selects, and adapts standard techniques, procedures, and criteria., • Leads tasks and projects of moderately complex scopes., • Develops plans, specifications, and other project documents., • Assigns tasks to other technical and non-technical staff. Predominantly plans and coordinates detailed aspects of the engineering work., • Prepares scopes, budgets, and schedules for assignments., • Receives supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters., • Receives direction on unusual conditions and developments., • Mentor direct reports and other engineers., • Possesses advanced oral and written communication skills, including interpretation of complex technical and contractual language., • Considers the needs of diverse project stakeholders., • Leads project meetings and represents the organization in communications pertaining to broad aspects of engineering assignments. At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: • Competitive salary -GAI is committed to paying market-based salaries, • Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire), • New paid Maternity/Paternity/Adoption program, • Generous Paid Time Off and 7 paid holidays, • 401k company match, • Tuition Reimbursement #INDHP #LI-VL1 EducationBachelors of Engineering (required) Experience8 years: Design and prepare plans, calculations, and specifications for transportation structures, including highway bridges, retaining walls, box culverts, and other miscellaneous structures per AASHTO and ODOT requirements. (required) Licenses & CertificationsDriver's License (required) Professional Engineer (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Develop engineering procedures, including document control, submissions management, creation and tracking of Request For Information (RFIs), material samples, documentation and tracking of potential cost changes, documentation and tracking of approved change orders, within budgetary guidelines. Qual