Trabajos receiving en Los Angeles, California - Page 4Crear alertas

Job DescriptionAmity Foundation, internationally acclaimed teaching, and therapeutic community is seeking compassionate and enthusiastic individuals with a desire to teach, learn and join our community as a Driver. This groundbreaking opportunity not only will allow you to work with our prison programs to help the inmate population but will also enhance your training and experience in the field. About Amity: Amity Foundation is a safe place where people can change in an environment that fosters trust; where new values can be formed; responsibility developed, and lasting relationships built. Amity is dedicated to the inclusion and habilitation of people marginalized by addiction, homelessness, trauma, criminality, incarceration, poverty, racism, sexism, and violence. Amity is committed to research, development implementation, and dissemination of information regarding community building. Remembrance, Resolution, Reconciliation, Restoration, Renewal About the Position:A Driver is responsible to provide transportation for JCOD STOP prospective and current participants upon release from designated Los Angeles County Jails, California State Prisons, assessment locations (TBD), and Community Based Providers (CBPs) as appropriate. The driver is required to be safety and customer service orientated when welcoming JCOD STOP to the community and other destinations at all times. What You Will Do: • Responsible for providing accessible transportation to STOP participants receiving services in the STOP network of Community Based Providers (CBPs) to STOP locations upon release from LA County Jail institutions., • Assist in coordination of driving schedules with STOP supervisors and faculty., • Ensure that all vehicles are kept clean and presentable., • Maintain accurate records of all STOP participant transportation., • Maintain transportation authorizations in the designated data management system as needed., • May require data entry and/or other administrative tasks as directed by the Data Coordinator., • In rare cases may require overnight accommodation when transporting participants from remote locations., • Possess a high school diploma or its equivalent., • Must have a valid California driver’s license and be eligible for Amity vehicle insurance., • Plus: Knowledge of State of California Laws and Rules of the Road as stated in California Driver Handbook. Two (2) years of experience working with criminal justice involved, substance use disorder (SUD) involved, and/or mental health involved populations., • Data entry and computer skills., • Understanding of causes, symptoms, and effects of substance abuse/mental health challenges; appreciation for the behavioral, psychological, physical, and social effects of drug abuse., • Ability to demonstrate proper attitudes and techniques towards STOP program participants., • Ability to work co-operatively with STOP Area Transportation teams., • Ability to work constructively with diverse people and with parties that may have divergent perspectives and interests., • Flexibility to work evenings and weekends when necessary.What We Offer:, • 100% Employer-Sponsored HMO plan., • PPO Medical, Dental, Vision., • Paid vacation, Sick time, & 11 paid holidays., • 401K, HSA, & Life insurance programs., • Community-oriented workplace., • An organization committed to community action & social justice.

Job Description For nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Inspector Level 2 position in Long Beach, CA. This is an opportunity in which you will be supporting the first or second shift. This is a Full-time position. This is a 3-month contract opportunity, working Monday through Friday on the 1st shift. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you! Key Responsibilities: * • Support the Receiving Department by performing inspections of machined rocket parts and associated documentation to reduce the backlog of parts and paperwork., • Perform detailed inspections—visual, dimensional, and physical—on components, assemblies, and raw materials throughout various production phases (including in-process, final, and first article) to verify compliance with engineering drawings and specifications., • Operate and utilize precision measuring instruments such as micrometers, dial indicators, gauge blocks, height gauges, and profilometers to validate part conformity., • Conduct surface plate inspections and statistical lot sampling based on quality requirements., • Apply sharp visual inspection skills to identify quality issues and product defects, including damage such as burrs, scratches, loose fasteners, dings, and inadequate edge distances., • Identify and categorize nonconformities and confirm that corrective actions or rework have been properly executed., • Receiving shipping documentation for accuracy, confirming part numbers, serial numbers, change notices, and destination data are correct., • 3+ years of hands-on experience with precision mechanical parts inspection., • Strong ability to read and interpret manufacturing drawings and industry/commodity standards., • Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., micrometers, calipers, height gauges)., • Ability to adapt to new technology and software., • Excellent visual acuity to detect defects in complex products., • Must be willing to undergo a background check. This position requires access to ITAR-controlled technical data and/or defense articles. Must be ITAR compliant and must be willing to undergo a background check.

Job Description SUMMARY: With expertise inspects dimensional mechanical or electromechanical piece parts, subassembly or final assembly products in such areas as final inspection, precision assembly, in-process and shipping and receiving. ESSENTIAL DUTIES AND RESPONSIBILITIES: Inspect mechanical and electromechanical parts, piece parts, subassemblies, and assemblies for workmanship and conformance to engineering standards and production specifications. Use precision measuring tools, coordinate measuring machines, and electronic instruments and perform inspections in accordance with authorized specifications and quality control standards. Set up and operate test equipment utilizing hydraulic and air gages, electrical devices, and other types of gages and testing equipment necessary for inspection. Stamp or approve acceptable work or prepare paperwork as required for rework or rejection. Note deviations from specification, purchase orders, dimensions, finishes, material or quality. Ensures the history of the inspection process is kept up to date by properly maintaining the inspection records and history on fabricated and purchased parts. Keeps nonconforming parts from being kept in stock by purging stock when it has been determined that it is questionable, and reinspection is required. QUALIFICATIONS: Possess in-depth knowledge of shop math in order to perform calculations for the inspection of parts. Must possess in-depth knowledge of inspection methods and gauges used in mechanical inspection to verify conformance of purchased or manufactured product to print specifications. Experience with standard inspection tools such as Micrometers, Calipers, Height Gauges, Threaded Plug gages, Threaded Ring Gages, V-Blocks, Optical Comparators, Profilometers required. Must be proficient in the use of Geometric Dimensioning and Tolerancing based upon ANSI Y14.5M practices. EDUCATION and/or EXPERIENCE: Two-year certificate from college or technical school; with a minimum of three (3) years of related experience and/or training; or a High School diploma or GED Certificate and a minimum of five (5) years of related experience and/or training; or equivalent combination of education and experience. Company DescriptionVACCO Industries is a leader in the design and manufacture of high-tech fluid flow components for Space, Defense and industrial applications. We offer a flexible 4-day work week, competitive salary and benefits package and a challenging but rewarding work environment. Due to the nature of our Defense contracts, candidates must be able to verify U.S. Citizenship. VACCO Industries is an Equal Opportunity Employer.VACCO Industries is a leader in the design and manufacture of high-tech fluid flow components for Space, Defense and industrial applications. We offer a flexible 4-day work week, competitive salary and benefits package and a challenging but rewarding work environment. Due to the nature of our Defense contracts, candidates must be able to verify U.S. Citizenship.\r\n\r\n VACCO Industries is an Equal Opportunity Employer.

Job Description Classification: Non-Exempt We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Route Relief/Utility RSR supports the Service Department in its objectives to meet our customers needs through up-selling/cross-selling and providing superior customer service. Main duties are to cover routes and perform service related tasks as required. Reports to the District Manager. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Perform all responsibilities of a Route Sales Representative and related tasks., • Learn and support all routes. Run routes as needed for holidays, vacations or other vacancies., • When not on a route, assist in rush deliveries, renewals, audits, training and any other tasks assigned by supervision., • Solicit new customers, up-sell/cross-sell/sample all lines of service or product and ensure a profitable product mix., • Actively participate in promotions and contests, training and audits., • Follow company policies/procedures regarding new customers, managing customer needs and all aspects of service., • Ensure customer loyalty and outstanding customer service. Build relationships, communicate openly, educate customers and proactively resolve concerns in cooperation with supervision., • Safely operate a delivery vehicle on each trip, following all applicable laws and company policy. Maintain vehicle cleanliness and perform regular vehicle inspections., • Handle and process customer payments. Keep route paperwork current., • Ensure timely and correct deliveries of complete textile loads, pick up soiled textiles and maintain proper inventories in accounts. Service items such as facility maintenance products., • Monitor and report competitive activity. Keep service agreements current and renewed., • Return from route and off load soiled textiles in the receiving area of facility., • Accurately prepare route paperwork and follow check-in procedures., • Follow written and verbal instructions and perform other tasks as directed by supervision. Additional Functions: • Have and maintain a valid Drivers License, CDL when applicable., • Maintain a driving record free of chargeable accidents, speeding, safety or other violations., • Demonstrate excellent skills in the operation of vehicles and verifiable minimum one year experience of safe and successful driving., • Demonstrate excellent skills in customer service and route sales., • Excellent verbal/written communication skills in English, comprehend and follow direction and good time management skills and team player., • High School graduation or similar experience. Qualified drivers license. Travel Requirements: • Daily, by delivery vehicle within a route. Typical Environmental Conditions: • Operating vehicles on public roads, in and out of customer locations, loading areas of a typical industrial laundry facility, Service Center or depot., • Indoor and outdoor areas of a typical industrial facility. Typical Physical Activity: • Physical Demands - sitting, grasping, driving stooping, kneeling, reaching overhead, moving carts up to 500 lbs., lifting up to 75 lbs, standing, walking, writing, speaking, hearing. Eligible candidates must be vaccinated against COVID. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco is an Affirmative Action/Equal Employment Opportunity Employer. Revised: 09/10/2021

Job Description We’re hiring for a Quality Mechanical Inspector Level 2 position in Long Beach, CA. This is an opportunity in which you will be supporting the first or second shift. This is a Full-time position. This is a 6 month contract opportunity, working Monday through Friday on the 1st shift. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you! Key Responsibilities: • Support Receiving Department by performing inspections of machined rocket parts and associated documentation to reduce backlog of parts and paperwork., • Perform detailed inspections—visual, dimensional, and physical—on components, assemblies, and raw materials throughout various production phases (including in-process, final, and first article) to verify compliance with engineering drawings and specifications., • Operate and utilize precision measuring instruments such as micrometers, dial indicators, gauge blocks, height gauges, and profilometers to validate part conformity., • Conduct surface plate inspections and statistical lot sampling based on quality requirements., • Apply sharp visual inspection skills to identify workmanship issues and product defects, including damage such as burrs, scratches, loose fasteners, dings, and inadequate edge distances., • Identify and categorize nonconformities and confirm that corrective actions or rework have been properly executed., • Receiving shipping documentation for accuracy, confirming part numbers, serial numbers, change notices, and destination data are correct., • 3+ years of hands-on experience with precision mechanical parts inspection., • Strong ability to read and interpret manufacturing drawings and industry/commodity standards., • Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., micrometers, calipers, height gauges)., • Ability to adapt to new technology and software., • Excellent visual acuity to detect defects in complex products., • Must be willing to undergo a background check., • Must be ITAR compliant. Apply now and become part of something extraordinary!

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Employee discounts Work schedule: Mon-Friday 8-5PM - go home daily. Saturday and Sunday OFF. Possible OVERTIME. REQUIREMENTS: Valid California Class A Driver and experience with driving manual transmission trucks, operating electric pallet jacks, forklifts and lift-gates. SKILLS AND ATTRIBUTES: Experience with shipping, receiving, procedures a plus. Forklift and electric pallet jack experience a plus, but will train. Experience in a warehouse environment. Pass a drug test, background check and e-verify. Must have customer service skills. Must be a team player. Honest, hard worker. Must be able to lift at least 50lbs. RESPONSIBILITIES: Daily delivery of orders to local customers using electric pallet jacks. General warehouse duties as assigned. Forklift operation. Pulling and assembling orders based on customers' orders. Loading and unloading of trucks. Pick-up of products from local vendors. Clean up and maintenance of work space.

Job Description SMALL AND GROWING AEROSPACE MACHINE SHOP SEEKING QUALIFIED PROFESSIONAL MACHINED PARTS INSPECTOR. IDEAL CANDIDATE WILL BE A SELF-STARTER THAT CAN WORK AND ACCOMPLISH TASKS WITH MINIMAL SUPERVISION AND HAVE MINIMUM 5 YEARS EXPERIENCE IN GD&T, FIRST ARTICLE PLATE INSPECTION, RECEIVING INSPECTION, IN-PROCESS INSPECTION AND REPORTING. GOOD ALL AROUND COMPUTER SKILLS. EXPERIENCE AND WILLINGNESS TO LEARN. GOOD COMMUNICATION SKILLS AND ABILITY TO WORK WITH PRODUCTION PERSONNEL TO RESOLVE QUALITY ISSUES AND BE RESPONSIBLE FOR MAINTAINING A HIGH LEVEL OF QUALITY AND WORKMANSHIP. Company DescriptionGrowing Aerospace Machine Shop. Boeing Silver Rated Supplier. Flexible Schedules, Medical Insurance, 401k, FSA, incentive bonuses and overtime.Growing Aerospace Machine Shop. Boeing Silver Rated Supplier. Flexible Schedules, Medical Insurance, 401k, FSA, incentive bonuses and overtime.

Job Description Job Title: In-Home Staff Assist - Care Partner Location: Thousand Oaks, CA (91359) Compensation: $25 per hour About the Role: We are looking for compassionate and reliable Care Partners with at least 1 year of Dialysis machine experience to provide quality support for patients receiving dialysis in the comfort of their own homes. As a Care Partner, you will work closely with patients undergoing in-home dialysis, ensuring their environment is safe, they are prepped and supported for treatment, and that their overall wellbeing is monitored. You'll be matched with patients based on both skill fit and personality, and supported by a clinical team. Key Responsibilities: • Conduct & Support patient setup for dialysis treatments (e.g., NxStage, Tablo or equivalent machines), • Provide companionship, emotional reassurance, and schedule adherence, • Monitor safety and assist with light activities of daily living (ADLs), • Maintain communication with clinic nurses and care coordinators, • Prior experience supporting dialysis patients (home or clinical setting), • Preferred: Familiarity with home dialysis machines, • Reliable, empathetic, and detail-oriented, • Strong interpersonal communication, • Must be dependable, • Consistent weekly hours at $25/hour, • Stable scheduling tailored to the client's care plan, • Training support and placement assistance, • Work independently while being supported by a clinical care team

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! QUALITY INSPECTOR III - MECHANICAL Based out of Rocket Lab's Headquarters in Long Beach, CA the Quality Inspector III - MECHANICAL is responsible for carrying out inspections using, but not limited to, prescribed inspection criteria. A high level of attention to detail is needed to detect anything related to the product that does not meet engineering/production standards. In this role you will help prevent faulty hardware from progressing in the manufacturing process and support root cause mitigation and elimination of failure modes. You will support the Quality Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors. WHAT YOU'LL GET TO DO: • Perform complex mechanical inspections for purchased parts, 3D-printed components, CNC-machined items, electro-mechanical components, and propulsion assemblies., • Perform all types of precision inspections, including receiving, in process and final assembly inspections. This includes capability to effectively use hand measurement systems and CMM., • Thoroughly document non-conformance in accordance with Rocket Lab systems and procedures in our internal ERP, MES and Issue tracking system., • Collaborate with engineering and management to improve work instructions and identify critical inspection points in the process., • Coordinate with Production personnel to prioritize workload and enable the team to meet key delivery milestones., • Embody a Built in Quality philosophy, consistently detecting non-conformance (Don't accept a Defect – Don't Pass a Defect) and preventing escapes to downstream customers. YOU'LL BRING THESE QUALIFICATIONS AS A QUALITY INSPECTOR III - MECHANICAL: • 5+ years of experience working in a quality assurance role in a quality mechanical manufacturing environment., • Experience with Geometric Dimensioning and Tolerancing (GD&T), • High school diploma or GED THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Experience in space manufacturing in-process environment on engine builds, • Experience with precision measuring equipment such as comparator, romer arm, Keyence Vision System, and/or CMMs (PC-DMIS), • Experience performing visual inspections using borescope, • High level of experience using hand measuring instruments including calipers, micrometers, depth gauges, feeler gauges, pine gauges, thread gauges, surface roughness measurement, microscope etc., • Inspection experience with aerospace components & assemblies, • Experience working with Enterprise Resource Planning (ERP) systems ADDITIONAL REQUIREMENTS: • Ability to work one of the following shifts:, • 5:00AM – 3:30PM Monday– Thursday, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25—$32 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionCompany Description South Bay BMW, located in Torrance, CA has immediate opportunities for technicians to become part of the BMW Family! Job Description As a BMW Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You’ll be at the forefront of innovative automotive diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched., • Performing diagnostic services and troubleshooting to determine repair needs., • Providing labor, time, and parts estimates for repair services., • Performing high quality and efficient repair services for various automotive systems, including engine, steering, suspension, brakes, and air conditioning in accordance with Center and Factory standards., • Performing Quality Control checks for repaired vehicles to ensure repairs are complete., • Completing all required paperwork and documentation for repair services., • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times., • Communicating directly and efficiently with Service Advisors and Parts Department Employees., • Participating in continual BMW proprietary training/education programs to hone skills and develop expertise in industry-leading BMW automotive technologies and processes., • Demonstrating behaviors consistent with Employer's values in all interactions. You’re a passionate, skilled, and dedicated individual who is excited by the opportunity to work on The Ultimate Driving Machine. You’re highly self-motivated and detail-oriented with solid organizational and time-management skills. You’re excited about innovative technologies, ideally have previous European brand service repair experience, and are committed to Fix it Right the First Time to provide the ultimate customer experience. Qualifications • About You, • High school diploma or equivalent., • Possess great mechanical, electrical, and computing skills., • Be 18 years of age or older., • Own a valid driver’s license., • At least 2+ years previous of hands on automotive repair experience in a professional environment or equivelant., • Previous European automotive technician experience a plus, • ASE certifications a plus, • Must be authorized to work in the USA., • Must perform duties and responsibilities in a safe manner., • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, and maintenance of a valid driver's license. Additional Information All your information will be kept confidential according to EEO guidelines. The average California Automotive Technician salary typically falls between $54,435 and $72,877 Per Year. Disclaimer: Salary ranges can vary widely depending on the city and many other important factors, including education, certifications, additional skills, the number of years you have spent in your profession. #automotive #technician #mechanic #BMW #ASE

Job Description Forklift Operator Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. ICP Group is comprised of market leading brands known for innovation, quality, and performance. Founded in 2015 and supported by a lean corporate team, ICP Group has scaled rapidly through organic and acquisition growth into one of the largest coatings, adhesives, and sealants companies in North America. ICP Group is headquartered in Andover, MA and has manufacturing and distribution sites throughout North America, Latin America, UK, Europe and the Asia Pacific region. Key Responsibilities • Responsible in selecting the correct product according to the pick sheet, placing the product on a pallet in a specified manner and placing the completed order at a designated staging area for shipment to our customers and/or dealers., • Operate a Forklift moving raw materials around the plant and loading onto pallets and loading and unloading onto trucks for shipping., • Stacking finished goods onto pallets, wrapping, and loading finished pallets onto trailers., • Must be able to work sitting or standing throughout the shift and work safely in an industrial plant environment using machinery and chemicals., • Able to work in a fast-paced production environment., • Comfortable moving large amounts of product through congested areas using various types of equipment., • Prior loading/unloading experience in a high-volume facility., • Material handling, cycle counting and scanning experience a plus., • 1-2 year of Forklift experience for sit down and standup forklifts., • Forklift Certification preferred., • Shipping and Receiving experience a plus., • Ideal candidates will also have experience using high-reach trucks as well to select product for shipping., • Experience reading and working with SOPs a plus., • Have experience working with chemicals and/or light chemical manufacturing is preferred but not mandatory., • Ability to comprehend and abide by relevant policies/procedures pertinent to safety, quality, security, and operations., • Ability to be flexible and adaptable, and change priorities and direction as needed., • Must have a positive attitude towards work and can work well as a member of a team, • After receiving training, employee must be able to show understanding and competency on safety rules and regulations by written or verbal examination., • Ability to understand and follow posted signage throughout the facility., • Clear understanding of lock-out, tag-out procedures., • Must be familiar with the standard operating procedure and operator manual for the safe operation of the equipment., • Clear understanding of Hazard communication policies., • Experience with Scanner Working Conditions • Required to have 20/20 vision or corrected 20/20., • Employee must have full range of motion to stand, walk, sit, reach, climb, stoop or kneel., • Employee must be able to complete repetitive strenuous work under varying climate conditions., • Employee must be able to safely lift up to 70 Lbs., • Employee must be able to stand for extended periods., • Must be able to work in a plant environment with varying levels of temperature and physical requirements., • Strong communication skills. ICP Group is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Powered by JazzHR XtKPawaSWw

Job DescriptionDescription: About Us: Unis accelerates logistics success with our Transportation Management System that offers unparalleled control, visibility, and adaptability. Unis strives in elevating our employees and operations toward new heights of excellence. As client’s partner with us, we focus on more than just a business relationship; it's an opportunity to unlock a world of value-added services that will enhance operational standards and elevate success by unifying our clients’ supply chain networks through superior technology, assets, and information services. Available Shifts & Pay: 1st Shift: 8am -12pm - Pay $19.00 2nd Shift: 12pm- 4pm - Pay $19.50 Job Description Purpose and Scope: The Forklift Driver ensures efficient and safe movement of products within the warehouse, fulfilling customer orders, assisting with receiving and inventory operations, and maintaining accuracy and speed standards. This role supports a cohesive team environment and promotes workplace safety and respect. Responsibilities: • Operate a forklift to fill customer orders in a fast-paced environment., • Move products efficiently and safely using various equipment., • Use an RF scanner gun to identify the correct products for receiving, moving, gathering, or distributing to complete customer orders., • Document and maintain inventory records., • Assist the Receiving Department with unloading new merchandise from trucks when needed., • Back-up shipping/receiving loading and unloading containers., • Support the Inventory and Returns Departments with daily operations., • Maintain a positive attitude and foster a sense of teamwork., • Assist other departments with work activities as needed., • Build strong relationships within the warehouse to promote a safe and respectful working environment., • Maintain order selection performance standards for speed and accuracy with minimal damage., • Ensure labels and pallets are accurate., • Safety Vest, • String Knit Gloves, • Must be able to lift to 50 LBS. without assistance., • Work from a platform at a height of 30 feet above ground., • Demonstrated troubleshooting abilities. Education/ Training: • High school diploma or GED equivalent preferred., • Clear background check and drug screen, • Completion of forklift driving course, • Previous warehouse experience., • Prior experience as a forklift operator. Unis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race (including traits historically or culturally associated with race, such as hair texture and protective hairstyles), religion (including religious dress and religious grooming), color, age (40 and over), genetic information, disability (mental and physical), medical condition (as defined under state law), national origin (including language use restrictions and possession of a driver’s license issued under section 12801.9 of the California Vehicle Code), ancestry, sex (including gender, gender identity, gender expression), sexual orientation, marital status, familial status, parental status, domestic partner status, citizenship status, pregnancy (including perceived pregnancy, childbirth, lactation, or pregnancy-related conditions), military caregiver status, military status, veteran status, or any other status protected by federal, state, or local law. Unis complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Unis expressly prohibits any form of unlawful employee harassment or discrimination based on any of these protected categories. The duties and responsibilities described above are not a comprehensive list and additional tasks may be assigned.

Job Description About Million Dollar Baby Co. Million Dollar Baby Co. started in 1990 and is proudly family-owned and operated in Los Angeles. Since then, MDB has grown to 7 distinct brands of children's furnishings ranging in style, aesthetic, and price, while carrying some of the industry's most eco-conscious and award-winning designs. We can be found in retailers like Target and Amazon, and specialty retailers like Pottery Barn Kids and Crate & Barrel. Under the Million Dollar Baby Co. parent company are our family of brands: Babyletto, daVinci, Nursery Works, and Namesake. We're proud to offer the most Greenguard Gold–certified cribs on the market and to use FSC-certified sustainable wood across our brands whenever possible. We've also pioneered Styrofoam-free packaging for several of our best-selling collections — an innovation that reduces waste while protecting our products during shipment. At Million Dollar Baby Co., our team members are our #1 priority, and we partner with exceptional partners and retailers around the world who share our core values: • Treat Your Team Like Family — lead with respect, gratitude, empathy, and kindness., • Make an Impact, Drive Results — focus on meaningful work that moves families forward., • Deliver a "Wow" Customer Experience Every Time — every detail matters., • Strive for Continuous Improvement & Learning — keep growing, keep getting better., • Cultivate Quality Conversations — communicate honestly and thoughtfully to build trust. Over the years, our commitment to people, innovation, and a positive workplace culture has earned us five consecutive "Best Place to Work" awards, one of the best workplaces by "Built in LA", a 4.6 rating on Glassdoor, and 13 years on the Inc. 5000 Fastest Growing Companies list — recognitions that reflect the heart of who we are and the community we're proud to build. We'd love to talk to you! About the Role: We are looking for a person who's not afraid of rolling up their sleeves as a Warehouse Associate at MDB Co. This position is a full-time direct-hire position with full benefits 100% paid for by the company. The perfect person for the role should have a positive attitude, be eager to learn, be reliable, and like being part of a team. You will operate powered industrial trucks to load and unload product and materials and deliveries and move them to and from storage areas, loading docks onto railroad cars, trucks, or warehouse racks. This role also involves manual labor, as you will load and unload containers, pick ship, pack, assemble, inspect, and repair products. You will also enter product information into our ERP system via scan guns and computers. You may work in receiving, shipping, returns and replacement parts, inspection, or production, and will partner with other team members in lifting, pulling, or pushing heavy items. What you'll be doing (including but not limited to): • Load & unload containers using a stand up forklift (reach truck) or manually, • Sort product if necessary and ensure that the product is unloaded correctly, • Clean and maintain supplies, tools, equipment, and storage areas to ensure compliance with safety regulations, • Check loads are secure, stacking empty pallets, • Perform daily forklift equipment inspection for safety and proper preventive maintenance, • Pick, pack, and ship product, • Keep records on the use or damage of stock or stock-handling equipment., • Examine and inspect stock items for wear or defects, reporting any damage to supervisors., • Verify inventory computations by comparing them to physical counts of stock, and investigate discrepancies or adjust errors., • Store items in an orderly and accessible manner in warehouses, tool rooms, supply rooms, or other areas., • Mark stock items using identification tags, stamps, electric marking tools, or other labeling equipment., • Complete any other duties and projects that may be assigned., • Follow warehouse safety rules., • Expected hours for the role is the following schedule:, • 1+ year of Reach Truck Forklift experience (Crown reach truck or Raymond experience is highly preferred), • 2+ year of Lead experience overseeing a team of direct reports, • Must learn product and have good attention to detail, • Be a team player and reliable, • Microsoft Office computer skills, • Data entry skills, • Flexible with change, may be rotating from dept. to dept., • Execute assignments in an accurate, timely and safe manner, • Proficient day to day math, language and reading skills California pay range$23—$25 USD Our Benefits: • 100% of your health, dental and vision insurance monthly premiums paid by us!, • Flexible PTO because we respect the need for work/life harmony, • Company matching 401(k), • Vacation reimbursement and health & wellness subsidy programs, • Tuition reimbursement, • Matching charitable donations to the nonprofit organization of your choice, • Company-wide monthly celebrations - lunch is on us!, • Dog-friendly workplace, yes! You can bring your best friend to work Million Dollar Baby Company is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application and/or recruitment process.

Job Description King's Fish House wants to "Welcome You to the House that Seafood Built". With our embodiment of hospitality from the heart and spectacular seafood dishes to delight our Guests, come join our world-class team! Competitive hourly rate $20 - $25 / hour based on experience. We keep it reel! Premium benefits, an amazing company culture, growth opportunities, and more! Are you hooked yet? What do we bring to the table? • Growth Opportunities, • Great training and commitment to promotions from within!, • Teamwork / Flexible Hours, • Education Reimbursement, • Generous Dining Discount, • Professionalism, • Productive Environment, • Strong company culture, • Delicious food in a beautiful restaurant! The Back of House Supervisors support the management team in providing a friendly, helpful and knowledgeable kitchen crew that goes above and beyond at all times. Supervisors are part of a fun, fast paced environment and will have multiple responsibilities from guest interaction, to expediting orders, to hands on cooking. This position is a step before our Management Training and is an opportunity for you to learn the culinary business and grow your career. Once hired, you will be trained to provide friendly, helpful and knowledgeable service that goes above and beyond at all times. You will be exposed to each station in the kitchen and expected to understand our food standards to coach and support others as you execute a shift. You will contribute and excel in a team service environment while supporting the Chef and Sous Chef. ESSENTIAL QUALIFICATIONS: • Minimum of 21 years of age, • High school graduate, some college, • Any previous supervisor experience., • 2 years’ experience in a kitchen/cook role, • Ability to communicate in a satisfactory manner, both verbal and written English., • Ability to compute basic mathematical calculations., • Ability to maintain complete knowledge of all menu and special items, prices and quality standards., • Ability to focus attention to performance of tasks despite frequent stressful, or unusual interruptions., • Ability to perform job functions with minimal supervision., • Oversees the daily receiving, storage, and preparation of all food products., • Records all waste (food product) on tracking sheet, • Nightly protein count, • Assists KM/EKM in counting weekly inventory, • Ensures that all food products meet company recipe specifications for preparation and quality., • Ensures that timing standards are met during production., • Inspects and approve dishes before they go to guest tables. Examine and assess the quality of ingredients and presentation., • Ensures compliance with health and safety regulations. Checking food temperatures, sanitation levels, proper storage, etc., • Cooking when needed to support the flow of the business, • Constant deferral to Manager on duty for business decisions that will effect financials., • Complete opening and/or closing duties as assigned, • Follow maintenance program and cleaning schedule.

Job DescriptionDescription: Forklift Drivers are responsible for utilizing Forklifts for receiving, stocking, picking, packing, and shipping in a distribution center setting. The preferred candidate will have the highest standards of safety, efficiency, and quality for both internal and external customers. Their goal should be to pick, pack and ship all orders with 100% accuracy. Forklift Drivers actively contribute to distribution center safety and promote a zero-accident culture. Principle Accountabilities: · Maintain a safe work environment. · Ensures a culture of safety throughout the organization by following FORMA safety policies and procedures. · Operate a stand-up forklift and/or sit-down forklift to meet daily work requests. · Pull daily wholesale orders. · Load & unload trucks. · Assist putting away product once unloaded via manual/electric pallet jack and/or stand-up forklift. · Assist in counting product at the time of loading and unloading trucks. · Wrap orders with stretch wrap and other packaging supplies as needed. · Stack items on pallets. · Moves product around warehouse and operates warehouse equipment (forklifts, pallet jacks, carts, scanners) safely and efficiently. · Daily lift inspections and reports · Performs additional responsibilities including cleaning and organizing warehouse, picking and packing product, etc. · Provides support during physical inventory counts of distribution center. · Meets deadlines and goals as established by distribution center management. · Maintains a clean and orderly working environment. · Consistently maintains reliable and acceptable attendance. · Works collaboratively with other employees and departments toward common goals and objectives. · Maintains a clean and orderly working environment. Requirements: Required Skills & Experience: · High School Diploma or General Education Degree (GED) preferred, but not required. · A minimum of 3-6 months related experience in a warehouse environment preferred utilizing reach trucks. · Must be able to drive in narrow aisles and open floor space. · Basic computer knowledge. · Ability to use bar code scanners, computers, data entry, generate labels preferred but not required. · Must have an open mind and willingness to learn new tasks/ technology. · Maintain flexible work schedule and adhere to the requirement of working any designated overtime as requested per business and operational needs. · Excellent communication and organizational skills. · Adaptability and foresight to handle unexpected situations. Physical Requirements: · Ability to consistently walk, stoop, kneel, bend 9+ hours a day. · Ability to frequently lift, lower, and carry up to 45 lbs. · Ability to ascend or descend ladders, stairs and/or ramps. · Ability to climb onto and off the forklift, to sit in the forklift for extended periods of time, and to turn his/her body to look in the direction of travel when driving in reverse.

Job DescriptionCompany Description RRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the industry’s most trusted portfolio of creative execution and world-wide business process consulting, with services designed to lower environmental impact. With 22,000 clients, including 93% of the Fortune 100, and 32,000 employees across 28 countries, RRD brings the expertise, execution, and scale designed to transform customer touchpoints into meaningful moments of impact. Job Description SCHEDULE: working with the Production Department. • Responsible for efficient and timely staging, loading and shipping of prepared mailings to guarantee proper quality and compliance with Company policy and USPS requirements., • Properly unload trucks of incoming material. Responsible for safe operations of powered industrial equipment at all times. Load trucks with finished goods; following trailer sheets and transportation manager’s directions. KEY DUTIES/RESPONSIBILITIES • Forklift Operations: Performs shipping scheduling and manages daily work assignments to prioritize loads and ensure accuracy for shipment to USPS. Weighs as required and put in proper location all raw materials. Follows all company guidelines. Unloads trucks with raw materials in a timely and cost effective manner. Coordinates the daily work routine of shipping operations, to include procedure compliance, and material handling priorities. Performs job functions utilizing company equipment in a safe and efficient manner. Ensures all deliveries are made in accordance with contract terms. Provides accurate route delivery information and any independent contract carrier issues., • Organizational: Works closely with machine leads and site supervision, to manage raw materials to ensure continuous production of finished products. Utilizes the Oracle Transportation system to properly generate required shipping and postal documentation. Implements and maintains all components of the Postage Payment Elective agreement (PPE) to comply with Postal regulations in the shipping of standard mail. Provides material handlers with PIC list identifying location of stored client material and available locations for storage. Monitors the orderliness of the warehouse raw material storage areas and takes action as needed to maintain proper organization. Assists in the location of excess material identified by the Client Services Department. Ensures disposition of copy when the Client Services department receives the information entered. Notifies appropriate personnel if there are major variances of client copy., • Administrative: Enters receiving information into computer systems and prepare reports. Performs good housekeeping techniques at the job site areas, properly handling paper waste and debris, and the removal of all potential safety hazards from the general area. Performs complete physical inventories of material as required by procedures and prepare reports. Develops good rapport with postal personnel assigned to the facility. Provides orientation to new employees, to include safety practices training. Monitors the quality of operator reports, to include piece weights and weight verification calculations. Investigates any issues detected in these reports or other receiving documents. Responds to inquiries from other departments regarding the receipt of information on a priority basis. Other duties as assigned. Qualifications Experience / Skills / Abilities: EDUCATION • High School Diploma or GED (Required), • Knowledge of USPS shipping requirements and company transportation, production & receiving procedures., • Attention to detail., • Basic computer software experience such as Microsoft Office Suite and various Warehouse/Transportation/Inventory systems., • Forklift Communicate with other production team members. PHYSICAL DEMANDS / WORKING CONDITIONS • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to carry up to 50lbs, push and pull up to 50lbs, twist, stand, walk, reach, and grip/ grasp throughout the shift. Employees are also required to lift up to 50lbs, squat, and kneel occasionally. Lastly, employees require the ability to work in a fast-paced environment (varying upon equipment)., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, airborne dust, paper particles, and industrial lift trucks. All work environments that exceed OSHA's standard on noise levels require associates to wear the hearing protection that is provided. Disclaimer: Weight requirements may vary by location. Please contact HR Business Partner for further details. Additional Information The national pay range for this role is $18.25. The pay range may be slightly lower or higher based on the geographic location of the hired employee. The actual pay offered may vary based upon, but not limited to: education, skills, experience, proficiency, performance, shift and location. In addition to base salary, depending on the role, the total compensation package may also include participation in a bonus, commission or incentive program. RRD offers benefits including medical, dental, and vision coverage, paid time off, disability insurance, 401(k) with match, life insurance and other voluntary supplemental insurance coverages, plus tuition assistance, maternity leave, adoption assistance, and employer/partner discounts. All employment offers are contingent upon the successful completion of both a pre-employment background and drug screen. RRD is an Equal Opportunity Employer, including disability/veterans

Job DescriptionCompany Description RRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the industry’s most trusted portfolio of creative execution and world-wide business process consulting, with services designed to lower environmental impact. With 22,000 clients, including 93% of the Fortune 100, and 32,000 employees across 28 countries, RRD brings the expertise, execution, and scale designed to transform customer touchpoints into meaningful moments of impact. Job Description SCHEDULE: working with the Production Department. • Responsible for efficient and timely staging, loading and shipping of prepared mailings to guarantee proper quality and compliance with Company policy and USPS requirements., • Properly unload trucks of incoming material. Responsible for safe operations of powered industrial equipment at all times. Load trucks with finished goods; following trailer sheets and transportation manager’s directions. KEY DUTIES/RESPONSIBILITIES • Forklift Operations: Performs shipping scheduling and manages daily work assignments to prioritize loads and ensure accuracy for shipment to USPS. Weighs as required and put in proper location all raw materials. Follows all company guidelines. Unloads trucks with raw materials in a timely and cost effective manner. Coordinates the daily work routine of shipping operations, to include procedure compliance, and material handling priorities. Performs job functions utilizing company equipment in a safe and efficient manner. Ensures all deliveries are made in accordance with contract terms. Provides accurate route delivery information and any independent contract carrier issues., • Organizational: Works closely with machine leads and site supervision, to manage raw materials to ensure continuous production of finished products. Utilizes the Oracle Transportation system to properly generate required shipping and postal documentation. Implements and maintains all components of the Postage Payment Elective agreement (PPE) to comply with Postal regulations in the shipping of standard mail. Provides material handlers with PIC list identifying location of stored client material and available locations for storage. Monitors the orderliness of the warehouse raw material storage areas and takes action as needed to maintain proper organization. Assists in the location of excess material identified by the Client Services Department. Ensures disposition of copy when the Client Services department receives the information entered. Notifies appropriate personnel if there are major variances of client copy., • Administrative: Enters receiving information into computer systems and prepare reports. Performs good housekeeping techniques at the job site areas, properly handling paper waste and debris, and the removal of all potential safety hazards from the general area. Performs complete physical inventories of material as required by procedures and prepare reports. Develops good rapport with postal personnel assigned to the facility. Provides orientation to new employees, to include safety practices training. Monitors the quality of operator reports, to include piece weights and weight verification calculations. Investigates any issues detected in these reports or other receiving documents. Responds to inquiries from other departments regarding the receipt of information on a priority basis. Other duties as assigned. Qualifications Experience / Skills / Abilities: EDUCATION • High School Diploma or GED (Required), • Knowledge of USPS shipping requirements and company transportation, production & receiving procedures., • Attention to detail., • Basic computer software experience such as Microsoft Office Suite and various Warehouse/Transportation/Inventory systems., • Forklift Communicate with other production team members. PHYSICAL DEMANDS / WORKING CONDITIONS • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to carry up to 50lbs, push and pull up to 50lbs, twist, stand, walk, reach, and grip/ grasp throughout the shift. Employees are also required to lift up to 50lbs, squat, and kneel occasionally. Lastly, employees require the ability to work in a fast-paced environment (varying upon equipment)., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, airborne dust, paper particles, and industrial lift trucks. All work environments that exceed OSHA's standard on noise levels require associates to wear the hearing protection that is provided. Disclaimer: Weight requirements may vary by location. Please contact HR Business Partner for further details. Additional Information The national pay range for this role is $18.25. The pay range may be slightly lower or higher based on the geographic location of the hired employee. The actual pay offered may vary based upon, but not limited to: education, skills, experience, proficiency, performance, shift and location. In addition to base salary, depending on the role, the total compensation package may also include participation in a bonus, commission or incentive program. RRD offers benefits including medical, dental, and vision coverage, paid time off, disability insurance, 401(k) with match, life insurance and other voluntary supplemental insurance coverages, plus tuition assistance, maternity leave, adoption assistance, and employer/partner discounts. All employment offers are contingent upon the successful completion of both a pre-employment background and drug screen. RRD is an Equal Opportunity Employer, including disability/veterans

Job Description Emerald Technologies has an exciting opportunity for a quality-oriented Final Inspector - Level III to join its Brea, CA team! The Final Inspector - Level III will perform visual, electrical and dimensional inspection of printed circuit board assemblies; will be responsible for performing receiving inspections of outsourced processes and final assembly inspections while recording results and preparing various quality documents. Candidates must be able to work a minimum of 6 hours per day under a microscope. At Emerald Technologies each employee has a significant role in building innovative products for various industries. Come and work in a supportive, fun team atmosphere where the work is meaningful, and careers have no limits! Responsibilities of the Final Inspector - Level III: • Read blueprints and/or engineering specifications to obtain information such as specified material, electrical, cosmetic requirements and workmanship instructions., • Perform visual and dimensional inspections of printed circuit board assemblies to ensure workmanship which complies with the appropriate requirements from engineering drawings, process specifications, IPC-610 standards, J-STD-001 and customer specific criteria., • Performs inspection on electrical or electronic components by using electrical meters or instruments to confirm adherence to electrical specifications., • Performs inspection of conformal coating under both black and white light., • Perform and record results of first article inspections of boards after Thru-Hole., • Perform sub-assembly, box build, shipping, and receiving inspection as required., • Assist in failure investigations, root cause analysis and corrective action activities and quality improvement projects. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the Final Inspector - Level III: • High School Diploma or equivalent., • Minimum two years of related inspection experience in electronics manufacturing., • Ability to read blueprints, drawings, specifications and PCB gerbers., • Skilled in electrically measuring resistors and capacitors., • Ability to effectively communicate in English both in writing and verbally at the general business level., • Expertise in reading component values by inspecting parts., • Knowledge of various computer programs (Microsoft Excel, Word, Outlook and Adobe). Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Schedule & Budgeted Hours Morning Shift (1 Shift Total) Shift Hours: Monday–Friday, 8:00 AM – 4:30 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs and will be compensated in accordance with California labor law. Budgeted Hours Budgeted Weekly Hours: 40 hours (5 shifts × 8 hours). Overtime: May be required based on production needs and will be compensated in accordance with California labor law.

Job DescriptionCompany Description () is in North Orange County in the city of Brea, California. Life Science Outsourcing, Inc (LSO) is a contract manufacturer of medical devices with in-built capabilities to offer clients full-service solutions through our six divisions. Clients rely on LSO to perform all activities required to introduce their products to market, from sourcing to drop shipping. We are looking for a proactive and enthusiastic Receiving QC Inspector with a good positive energy to join our team. In this role you will be responsible for ensuring that all incoming medical devices meet the necessary quality standards and comply with all applicable regulations. We encourage you to submit a resume with salary requirements. Job Description • Perform incoming inspection of medical devices, including visual inspection and dimensional measurement, • Verify an document product compliance with regulatory and company requirements, • Identify and document non-conformance found during inspection, • Participate in investigations related to non-conformance or product quality issues, • Assist with the development and implementation of inspection procedures, • Maintain accurate and up-to-date records of inspection results, • Communicate effectively with team members, supervisors, and other departments as neededQualifications To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements listed below are representative of knowledge, skill and or ability required. • High school diploma or equivalent, • Experience in quality control related field preferred, • Knowledge of medical devices regulations and standards preferred, • Ability to use measuring tools and equipment, • Detail-oriented with excellent organizational and communication skills, • Ability to work independently and as part of a team This position requires the ability to work on your feet for extended periods of time, as well as the ability to bend, stoop and lift objects. Walk extended distances as needed. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description The position entails working with contracted vendors to ensure the timely and accurately documented service of legal process, as well as the receiving and copying of documents and or items requested under previously served legal process. As well as entering the details of the work into our system so both internal and external clients have an accurate understanding of the status of their orders and the details of the service of the legal documents and the acquisition of the items requested. Specific tasks performed include: • Assigning and scheduling the service of legal process with an approved, contracted vendor through a secure means that protects the identities of the subjects of the request and any Personal Identifiable Information noted in the documents., • Follow up with contracted vendors to verify the results of the jobs given to them, to make sure they were performed within the rules of civil procedure and company guidelines; that all required documentation is filled out accurately and completely, and that all necessary documentation is sent to us in a timely fashion., • Advise Internal clients (Customer Service and Order Entry) of the details of the orders processed and/or the feedback regarding the locations contacted, to ensure that our external client (the law firms, attorneys, and insurance companies we serve) know the results of our efforts as well as any issues that we encountered in our attempts to serve and obtain the records and items they requested, and that the information in our database about the locations we contact is updated to ensure timely and effective service of legal process and procurement of the requested records or items., • To review Invoices sent to us by contracted vendors for accuracy and see to it that payment is processed to pay those invoices in a timely fashion. Experience in dispatching drivers, agents, or service technicians to jobs sites to do work, including entering the time frame needed for the visit, special instructions to follow to effect a proper completion of the job, and follow up to ensure that the job was successfully completed. Standard computer fluency to communicate with the vendors to set up legal process serves and appointments to copy records, including the use of emails, online records portals, as well as phone calls and messages. Experience in Customer Service wherein it was necessary to make arrangements or appointments with a third party, within specific appointment times or ranges of time. The ability to work unsupervised, on the body of work given to you to process, to make sure they are managed so they are done on time, in order of priority. Attention to detail, along with the ability to spot and recognize flaws in documents that need to be corrected prior to being distributed for service. Qualifications: • High School Diploma or GED required, • 1+ year of relevant work experience, • Strong attention to detail and organizational skills, • Ability to handle confidential documents with discretionPerks & Benefits:

Job Description AnySignal is a startup whose mission is to usher in the next generation of RF products and services. For the most demanding space and defense missions, AnySignal provides a flexible platform with world-class performance that is easy to deploy, monitor, purchase, and upgrade. Our team has a diverse range of backgrounds that cover cloud computing to artificial intelligence, communications and sensing, embedded systems, and much more. Role As a Buyer at AnySignal, you will be responsible for driving the success of our supply chain operations by owning day-to-day purchasing, inventory management, and vendor coordination. This is a highly hands-on role: you will manage purchasing cycles directly, build and maintain data models in Excel/Sheets, and collaborate closely with engineers and contract manufacturers to ensure materials are ready for every build. You will play a critical role in enabling new product introduction (NPI) hardware builds, ensuring parts and assemblies arrive on time, and identifying cost efficiencies across the supply chain. Your work will directly influence the pace and efficiency of our hardware development and production. Responsibilities * Source and purchase a wide range of electronic and mechanical components in alignment with BOM requirements. * Own the NPI purchasing process, ensuring boards and components are procured and delivered for engineering test builds. * Place, track, and manage purchase orders with contract manufacturers and suppliers; mitigate risks and recover schedule slips. * Maintain inventory accuracy in systems (NetSuite, ION, etc.), including safety stock levels, consumption tracking, and vendor coordination. * Perform receiving, inspection, and kitting of parts when required for critical builds. * Collect, create, and analyze supply chain data—including purchase price variances (PPVs)—to identify savings and drive efficiency. * Build and maintain spreadsheet models for BOMs, budgets, inventory tracking, and forecasting.Collaborate with engineering on DFM, BOM updates, and ECO integration to ensure seamless transitions from design to production. * Partner with production, logistics, and finance teams to align material readiness with build schedules. Required Skills * 3+ years of purchasing and supply chain experience in hardware-focused industries (space communications, aerospace, PCBAs, robotics, or similar). * Proven ability to independently own and execute purchasing processes end-to-end * History of purchasing EEE components * Advanced Excel/Sheets skills (pivot tables, index-match, conditional formatting; VBA/scripts a plus). * Strong data analysis capabilities and experience working with ERP/MRP systems (NetSuite, SAP, ION, or equivalent). * Ability to interpret and manage multi-level BOMs and technical drawings. * Professional communication skills with both suppliers and cross-functional teams. * Strong problem-solving, organizational, and prioritization skills. * Bachelor’s degree in Supply Chain Management, Business, Engineering, or a related field. Desired Skills * Experience in a startup or New Space environment where flexibility and speed are essential. * Familiarity with PCB assembly processes and electrical components. * Familiarity with IPC standards. * Exposure to qualifying parts to MIL-STD-883 / 810 or NASA 8739 standards. * Knowledge of environmental test flows (HTOL, vibration, thermal-vac). AnySignal values and fosters an inclusive, accessible environment, where all employees and customers feel respected, supported and able to participate. We welcome applications from: women, Aboriginal persons, persons with disabilities, ethnic minorities, visible minorities, veterans, people who identify as LGBTQIA2S+ and others who may contribute to diversification in our environment. Should you have a need for accommodation, AnySignal will endeavor to meet your accommodation needs. At any stage of the recruitment and selection process you may make your needs for accommodation known through contacting our team, in confidence, by email to: . We aim to provide equal access to all applicants with disabilities, please do not hesitate to contact us about accommodations.

Job Description Responsibilities Sign-On Bonus: $20,000.00 or ask us about our Student Loan Payment Program! Artificial Intelligence; Advanced Technology; The very best in patient care. With decades of expertise, we are Radiology Forward. With dynamic cross-training and advancement opportunities in a team-focused environment, the core of our success is its people with the commitment to a better healthcare experience. When you join us as a Nuclear Medicine Technologist, you will be joining a dedicated team of professionals who deliver quality, value, and access in the 21st century and align all stakeholders- patients, providers, payors, and regulators to achieve the best clinical outcomes. You Will: • Performs high quality nuclear medicine and/or positron emission tomography/computed tomography images on patients while providing excellent care., • Assures proper dose of radionuclides are ordered for each patient., • Starts intravenous lines or performs straight stick venipuncture for isotope injection., • Administers radionuclide in a safe and effective manner., • Explains test procedures and safety precautions to patients, guiding them through a sometimes difficult process by gently talking them through the steps and answering their questions and concerns regarding exam procedures and process., • Monitors patients’ well- being during exams; recognizes patient discomfort or medical problems and takes appropriate action., • Maintains a nuclear medicine information system for all patient dosing, calibration, receiving and disposition, and all regulatory reports required by the RAM license., • Under the direction of the radiologist, administers radiopharmaceuticals to detect or treat diseases using radioisotopes., • Demonstrates a high level of competency and ensures team members are safeguarding patient property and Patient Health Information., • Responsible for safeguarding on-site medications following Company policies, procedures, and any legal requirements and ensures employee adherence to on-site medication policies, • Demonstrates and ensures team members a high level of respect for company property, including any cash and patient financial information on-site or on patient portals., • Is responsive to the needs of others by exhibiting and maintaining professional behavior toward patients and coworkers., • Demonstrates high-level respect for patient boundaries and cultural sensitivities during all interactions, including team members' interactions with one another., • Demonstrates ability to interact diplomatically and sympathetically with patients, their families, and the public in a clinical setting, and ensures team members adherence to the same expectation., • Passionate about patient care and exercise sound judgement and an ability to remain professional in all situations., • You demonstrate effective and professional communication, interpersonal skills and respect with patients, guests & colleagues., • You have a structured work-approach, understand complex problems and you are able to prioritize work in a fast-paced environment. To Ensure Success in This Role, You Must Have: • Must have current ARRT(N) or NMTCB certification, • Must have experience working in a high-volume setting., • Requires a high school diploma or GED., • Must have BLS certification. #nucmedsc We Offer: • Comprehensive Medical, Dental and Vision coverages., • Health Savings Accounts with employer funding., • Wellness dollars, • 401(k) Employer Match, • Free services at any of our imaging centers for you and your immediate family.

Job Description Job Title: In-Home Dialysis Care Partner Location: Thousand Oaks, CA (91359) Compensation: $25 per hour About the Role: We are looking for compassionate and reliable Care Partners with at least 1 year of Dialysis machine experience to provide quality support for patients receiving dialysis in the comfort of their own homes. As a Care Partner, you will work closely with patients undergoing in-home dialysis, ensuring their environment is safe, they are prepped and supported for treatment, and that their overall wellbeing is monitored. You'll be matched with patients based on both skill fit and personality, and supported by a clinical team. Key Responsibilities: • Conduct & Support patient setup for dialysis treatments (e.g., NxStage, Tablo or equivalent machines), • Provide companionship, emotional reassurance, and schedule adherence, • Monitor safety and assist with light activities of daily living (ADLs), • Maintain communication with clinic nurses and care coordinators, • Prior experience supporting dialysis patients (home or clinical setting), • Preferred: Familiarity with home dialysis machines, • Reliable, empathetic, and detail-oriented, • Strong interpersonal communication, • Must be dependable, • Consistent weekly hours at $25/hour, • Stable scheduling tailored to the client's care plan, • Training support and placement assistance, • Work independently while being supported by a clinical care team

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Quality team is focused on embedding quality into every part of the design and production process for Terran R. Not just inspecting at the end but influencing how things are built from the start. The team embeds themselves directly within design, manufacturing, test, and launch teams to stay close to the hardware, understand constraints, and proactively shape decisions. As we move beyond initial development into production and then scaled operations, now is the time to put the right processes, controls, and inspections in place without slowing down progress. The team plays a key role in balancing risk, driving a culture of ownership, and ensuring that speed doesn't come at the cost of reliability. Success here means building a quality system that scales with the Terran R program and Relativity as a whole. About the Role: • Perform receiving inspections of PCBA and quality assurance checks on avionics systems with its subassembly, components, wire harnesses and installations to ensure compliance with regulatory standards and company policies., • Maintain detailed inspection records and documentation to track the status and history of avionics components and systems., • Stay current with industry standards, regulations, and best practices related to avionics quality assurance and inspection processes., • Provide guidance and training to other team members on avionics quality inspection techniques and procedures., • Identify opportunities for process improvements and contribute to the development and implementation of quality initiatives within the organization., • Minimum 5 years of experience as a PCBA Inspector in a manufacturing environment, preferably in a quality function., • Proficient in inspecting solder joints, crimping, conformal coating, staking, and surface-mounted devices in accordance with NASA 8739 and/or IPC-J-STD-001, IPC-A-610 standards., • Knowledge of cable harness assembly and inspection following NASA-STD-8739.3 and 8739.4 and/or IPC-A-620 standards., • Experienced in conducting continuity test using DMM and inspection using portable measuring devices., • Familiar with avionics systems, components, and installations is essential, with the ability to interpret engineering drawings, technical manuals, and specifications., • Well-versed in process development and first-time quality efforts., • Highly organized and able to provide structure and direction to the previously undefined., • Experience leading projects or teams, even if not in a leadership role. Demonstrate the ability to take initiative and drive quality improvement efforts. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$33.15—$42.90 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job DescriptionDescription: Cristek is a Qnnect Company, a portfolio company of Arcline Investment Management, with revenues above $80 million and ~350 employees across multiple locations. Cristek manufactures electrical connectors, cable assemblies, harnesses, and related electro-mechanical products, and holds multiple quality certifications including AS9100 & ISO 9001. Cristek, established in 1985, is headquartered in Anaheim, CA with divisions in North Billerica, MA and Minden, NV. SUMMARY OF FUNCTIONS Maintains quality standards by approving incoming materials and recording quality results. Analyzing information, reporting research results, documentation skills, promoting process improvement, safety management, managing processes, manufacturing methods and procedures. DUTIES AND RESPONSIBILITIES • Approves incoming materials by confirming specifications; conducting visual and measurement tests; rejecting unacceptable materials., • Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database., • Keeps measurement equipment operating by following operating instructions, calling for repairs., • Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations., • Involves working with Engineering and other departments to evaluate products and report results., • Updates job knowledge by participating in educational opportunities; reading technical publications., • Accomplishes quality and organization mission by completing related results as needed., • Other duties as assigned.Requirements: EDUCATION AND EXPERIENCE • High School Diploma or equivalent, • Minimum of 2-3 years inspection experience. Experience working with electrical harnesses and/or connectors is preferred. Working knowledge of using video measuring systems is desirable., • Should be familiar with AS9100 and/or ISO 9001., • Must be proficient with Microsoft Office applications (Word, Excel, Outlook), • Must have a good understanding of Geometric Dimensioning & Tolerancing (GD&T) and use of vision systems and/or coordinate measuring equipment., • Must be proficient working with basic precision measuring instruments such as calipers, micrometers, dial/digital indicators, height gages, thread gages, pin gages, etc., • Must have experience performing first article inspection in accordance with AS9102 or equivalent., • Must be comfortable working with binocular microscopes for extended periods, • Must be able to pass Visual Acuity requirements (color, depth perception and field of vision), • Ability to read, comprehend and follow verbal and written instructions., • Must follow strong safety standards, • Must possess attention to detail, • Strong interpersonal skills and ability to work in a team., • Ability to work independently, focus, organize work, and complete assignments on time., • Sitting and standing for long periods. This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. At Cristek, we strive to create an inclusive and supportive work environment, and our benefits package reflects this commitment. Some of our benefit offerings include: • Insurance benefits: We provide our employees with access to comprehensive medical, dental, and vision insurances to ensure they can prioritize their health and well-being., • Paid Time Off (PTO): We believe in the importance of work-life balance, so we offer generous PTO allowances that accrue with each pay period so that our employees can rest and recharge, spend time with family and friends, or pursue personal interests., • Paid Holidays: We recognize the importance of spending time with loved ones during holidays, so our employees receive paid holidays to celebrate and enjoy these moments., • Growth Participation Units (GPUs): We provide growth participation units (GPUs) to our employees, which represent a share of the company's growth and success. Our GPUs are issued to all employees and as we increase the value of our business, they grow in value as well. When the private equity firm that currently owns us sells the company, GPUs will be paid out, with all employees sharing in the profits from the sale., • 401(k) Matching: We offer up to 4% of 401(k) matching to help our employees save for their future., • Short-Term & Long-Term Disability Insurances: We want to ensure that our employees are protected in case of unexpected circumstances, and provide short-term & long-term disability insurances, entirely employer paid., • Tuition reimbursement: We believe in continuous learning and development and offer tuition reimbursement to support our employees' educational goals. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description NO EXTERNAL RECRUITERS PLEASE No Sponsorship/Transfer Available Company Summary: For over 60 years, MeriCal has been at the forefront of innovation in the dietary supplement industry, delivering custom manufacturing and packaging solutions with passion and precision. With state-of-the-art facilities in Southern California and Ogden, UT, we transform ideas into high-quality products—from research and development to the finished products. Our team, with over 30 years of combined experience, is dedicated to crafting exceptional gummies, probiotics, tablets, capsules, chewables, and powders using clinically backed ingredients. At MeriCal, we don’t just meet expectations—we exceed them, every time. Join us and be part of a dynamic, forward-thinking team shaping the future of nutrition! The Opportunity: A Quality Inspector is responsible for ensuring all dietary supplement products comply with the specifications established by Merical and cGMPs. The Quality Inspector is responsible for conducting objective & subjective measures and making determinations if any non-conformance occurred. The Quality Inspector works to guarantee high quality output through random sampling and testing on anything from receiving, in process manufacturing and finished packaging product for release. Items that do not meet specifications are investigated and written documented corrective actions taken to ensure the issue does not occur again. What You’ll Do: • Ensuring Good Manufacturing Practices [21 CFR Part 111,117 & 211) are adhered. Independently perform inspection across multiple production stages proficiently and ensure compliance with quality, • standards., • Ability to follow instructions to comprehend the quality expectations for the materials, components or products., • Conducts sampling (Analytical, Microbial, Customer and Retains] and ensures testing against appropriate methods. Sampling must be conducted appropriately using good technique and verifying, • against dimensional and functional specifications. Maintain records of testing, information, and various metrics such as quantity of defective products per batch., • Collect samples for Analytical, Microbial, Customer and Retains as applicable and document within the appropriate quality record (batch record, specification, unipoint, etc.}., • Communicate to next level leader prior to rejecting raw materials, in process manufacturing or finished product with respect to quality standards., • Performs in process testing [such as allergen, ATP, Water Activity, Brix, Hardness, Thickness, Friability, etc.]. Provides guidance to manufacturing team on corrective actions for out-of-specification results., • Verifies Bill of Materials [bulk & packaging components} and ensures proper 10 tagging and organization of raw materials, components, staged bulk and finished goods on the production floor including reconciliation and pallet counts., • Ability to enter quality data & verify expiration dates into ERP system prior to Finished Goods release., • Verifies batch record matches items staged within manufacturing and packaging lines., • Verifies monitoring equipment [scales, metal detectors, torque meter etc.] is functioning correctly per our established SOPs., • Conduct bulk and final product acceptable quality limit (AQL} inspections per established SOPs. Understands varying sampling schemes based on sample size and AQL parameters., • Responsible for reviewing the cleaning Logs and provide verification authorization signature to release lines., • Ensure proper hold procedures and communication or alert management of any unusual occurrence and any pertinent issues that affect raw materials, production and/or packaging., • Inspects and maintains working environment routinely and ensures adherence to company safety policies and procedures., • May be required to operate forklift, pallet jacks, etc. if needed., • Performs other duties as assigned. What You’ll Bring: • Must have 3+ experience working in a quality related environment., • Should be able to lift a maximum of 25-30 lbs. of material when needed., • Food Safety or Dietary Supplement Experience a plus. Education Requirements: • High School Diploma/Certificate; one-year related experience and/or training; or equivalent combination of education and experience. The Perks: • No-cost vision insurance (yes, you read that right!), employer-paid life insurance, paid company holidays, generous paid time off, sick leave, employee assistance program, and a comprehensive wellness program., • Affordable medical and dental insurance plans are tailored for you and your dependents., • Exceptional supplemental benefits, including Accident, Critical Illness, Hospitalization indemnity plans, and pet insurance., • 401(k) matching plan and more! A reasonable estimate of the current base pay range for this position is $20.00 - $24.00 The compensation offered may vary depending on the candidate’s geographic region, job-related knowledge, skills, and/or education. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: MeriCal is an equal opportunity employer and is committed to providing a workplace that is inclusive and free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. We believe in creating a diverse and inclusive workplace where all employees feel valued and respected, and where differences are embraced as strengths. We are dedicated to fostering an environment that promotes equality and celebrates diversity.

Job Description The Senior Inspector performs receiving, in-process, and final inspection on electronic systems; electromechanical assemblies, or mechanical assemblies and subassemblies. They are responsible for determining whether parts or assemblies are acceptable based on drawing and specification requirements. The position requires accurate & concise communication between production, project management, shipping/receiving, and quality management. Duties and Responsibilities: • Perform all tests, inspections and measurements required by pre-defined instruction and/or experience., • Conduct inspection of incoming raw materials, first article parts, in-process materials, and finished goods, • Inspect both work in progress and completed tasks for compliance in accordance with Purchase Order Instructions, Design Drawings & Specifications, Quality Control Plan, Safety, and contractual requirements, • May Coordinate and assist with scheduled inspections with FAA/EASA regulatory personnel, • Develop training and train junior individuals on inspection equipment and methods, • May Travel to various local and international supplier facilities to preform inspections. Preferred Qualifications and/or Education: • 6+ years of experience working in a Quality Inspection role, • Experience in aerospace electromechanical quality control inspection, • Experience working in an ISO 9001/AS9100 QMS environment, • Must be able to read and interpret schematics, blueprints, specifications, etc. per ASME Y 14.5 and ASME Y 14.100 and able to train junior inspectors, • Able to read and interpret service manuals, diagrams and schematics relative to installation and repairs, • Willing and able to train junior inspectors on how to use various inspection equipment, • 6+ years of experience using mechanical/electrical inspection/test tools (calipers, micrometers, multi-meters, surface plate, height gauges, comparator, gauge blocks, thread gauges, etc.) and/or 6+ years working with FAA CFR Part 21 requirements performing and presenting parts for regulatory conformity inspections should be able to issue 8130’s & Form 1s, • Solid knowledge of AS9102 FAIR requirements and able to train junior inspector on its completion, • Must have a clear understanding of document types that are impacted by Configuration Control Changes; e.g. Drawings & Specifications, Procedures and Work Instructions, • Previous experience working with an ERP or MRP systems, • Proficient computer skills (MS word, Excel, Outlook) Benefits The starting pay range for this position is $25.00 to $31.00 per hour however, the base pay offered may vary depending on the level of the position, skills, experience, job-related knowledge, and location. In addition to a comprehensive package of health benefits that include company contributions, Safran Passenger Innovations offers a variety of additional benefits and perks to enhance your work-life balance experience including but not limited to: • A home allowance to elevate your home workspace, • Discretionary bonus program, • Future financial security with a 401(k) program with a company match, • Paid time off covering vacations, personal time off, and sick days, capped off by an exciting year-end holiday shutdown

Job Description Solid State Devices, Inc. High Density, High Performance, and High Reliability Products for Aerospace & Defense SSDI has been a pioneer in semiconductor manufacturing for over 50 years and has earned a reputation for setting the highest standards of reliability and performance. SSDI's high power and high voltage semiconductors and electronic systems meet the critical needs of many Aerospace and Defense applications. Quality Inspector (Mechanical, Receiving & In-Process Inspection) We are seeking a dedicated and detail-oriented Quality Inspector to join our team! The Quality Inspector will be responsible for performing mechanical, receiving, and in-process inspections to ensure that all products meet our company's quality standards. This role is crucial in maintaining the integrity and reputation of our products and requires a high level of precision and commitment to quality. Key Responsibilities 1. Mechanical Inspection: • Conduct detailed inspections of electrical and mechanical components and assemblies using various measuring tools and equipment (e.g., calipers, microscopes, micrometers, gauges)., • Interpret engineering drawings, specifications, and other technical documents to determine inspection criteria. 2. Receiving Inspection: • Inspect incoming raw materials, components, and products to ensure they meet specified quality standards and purchase order requirements., • Verify supplier documentation, such as certificates of compliance and material test reports., • Maintain accurate records of inspections and create detailed reports on the quality of received goods., • FET / Transistor Die Inspection, • Pre-Cap Inspection that are routine to semi-routine in nature 3. In-Process Inspection: • Perform in-process inspections on production lines to ensure products meet quality standards throughout the manufacturing process., • Monitor production processes for compliance with established procedures and quality standards., • Collaborate with production personnel to identify and address quality issues promptly. 4. Documentation and Reporting: • Accurately document inspection results and maintain inspection records., • Prepare and present quality reports to management, highlighting any areas of concern and suggesting improvements., • Assist in the development and implementation of quality control procedures and standards., • C & TX level In-process Data Review, • C level Final Data Review 5. Continuous Improvement: • Stay updated on industry standards and best practices in quality inspection. 6. Skills: • Proficiency in using inspection tools and equipment, • Strong understanding of mechanical drawings and specifications., • Excellent attention to detail and problem-solving skills., • Ability to work independently and as part of a team., • Effective communication skills, both written and verbal., • Proficient in using computer software for documentation and reporting. Education: • High school diploma or equivalent; technical degree or certification in quality inspection, manufacturing technology, or a related field is preferred., • Minimum of 1 year of experience in quality inspection, preferably in a manufacturing environment., • Proficiency in using inspection tools and equipment., • Strong understanding of mechanical drawings and specifications., • Excellent attention to detail and problem-solving skills., • Ability to work independently and as part of a team., • Effective communication skills, both written and verbal. Salary: $19.00 - $25.00 per hour / Bi-Weekly Pay Schedule (Direct Deposit) This is not a guarantee of compensation or salary, as final offer amount may vary based on experience. Solid State Devices, Inc. proudly offers a comprehensive benefits package to all regular full-time employees, which includes: • Medical, Dental and Vision Insurance, • Group Life Insurance / AD&D (Accidental Death and Dismemberment), • Voluntary Term Life Insurance /AD&D (Accidental Death and Dismemberment), • Paid Time Off (PTO), • 8 Paid Holidays Solid State Devices, Inc. is an Equal Opportunity Employer We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. I understand that if I am extended an offer of employment, it will be conditional upon my successfully passing a post-offer, pre-employment Background and Drug Screen. Upon employment, I agree to the following: • Signing an Employee Creation Assignment & Non-Disclosure, • Abiding by all rules, regulations, and performance standards of Solid State Devices, Inc., • Application forms and materials are the property of Solid State Devices, Inc.

Job Description Basic Scope/Purpose: (The job’s primary purpose or contribution to the department or organization.) Serves at main point of contact at the site for Quality, Health, Safety & Environmental Programs. Conducts receiving, in-process and final inspections in accordance with established guidelines; provides quality tools required for creation of conforming product to associates outside the department; communicates quality principles, practices and requirements to others as appropriate; utilizes advanced quality disciplines in the analysis of processes and product; supports continuous improvement initiatives; utilizes a Lean/Six Sigma improvement approach as appropriate when providing quality support. Principal Accountabilities: (The job’s essential or most important functions and responsibilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Quality: • Serve as the primary Quality Assurance resource to department supervisor(s) for problem identification, resolution, loss reporting and continuous improvement., • Develop, apply and document quality requirements and standards for the manufacture and inspection of product., • Design and implement methods for process control, process improvement, testing and inspection., • Establish supplier quality requirements and monitor and evaluate supplier performance., • Oversight for all internal and external quality audits, along with customer visits., • Develop internal employee training programs to support quality expectations along with training records., • Collaborate with suppliers, customers and internal process owners to resolve quality problems and assure that effective corrective action is implemented., • Support New Product Project teams to provide for smooth transition of New Products into the regular manufacturing process., • Support Engineering, Manufacturing and Marketing with product improvements., • Highlights potential quality issues to management in a proactive manner. · Sr QHSE Specialist Education and/or Relative Experience: (The level of education and/or experience needed to successfully accomplish the essential duties of this job.)(Also show level of education needed for Career Progression) · Bachelor’s degree (B.S.) from four-year college or university; or five years related experience and/or training; or equivalent combination of education and experience. o B.S. degree in Engineering, Environmental, Occupational Health and Safety, Industrial Hygiene, or related fields preferred. · Experience in evaluating/interpreting CalOSHA, EPA, SCAQMD and DOT regulations and NFPA, ANSI, standards. • Working knowledge of the Lean / Six Sigma problem solving methodology., • Excellent communication and influencing skills (written and verbal)., • Strong computer skills including QA applications, word processing, spreadsheets and databases., • Demonstrated history of taking initiative, meeting commitments and assisting in the creation of new tools or solutions to achieve business results., • Highly detail oriented; checks own work, keeps accurate records, organizes information effectively. · GSP or ASP preferred or ability to obtain · Six sigma training (preferred) · Audit experience / ISO9001 / AS9100 · APQP – advanced product quality planning • Developing process control plans · Coordinate the safety and environmental programs within the facility. · Conducts regular QHSE inspections and audits to identify potential hazards and assess compliance with established protocols. · Analyze QHSE data to identify trends and areas for improvement and develop action plans to address any identified issues. · Lead onsite safety committee meetings. · Ensure required training is conducted with associates. · Performs monthly sustainability metrics reporting. · Collaborate with HSE Manager and Human Resources on Workers Compensation claims. · Guide, support, and participate in local safety committee. · Engage the workforce through safety contacts and floor walks that address. housekeeping, safety inspections and safety observations. · Lead incident investigations and recommend corrective actions. · Manage incident reporting process to effectively prioritize, assign action, and close out identified risks in our business. · Promote / develop a positive HSE culture within the assigned sites. · Ensures site environmental compliance with applicable environmental regulations and site permits related to stormwater, air emissions, and waste generation/disposal. · Performs site stormwater sampling. · Performs environmental reporting required by South Coast AQMD, LAFD/CUPA, EPA, California DTSC, and California State Water Resources Control Board. · Coordinates hazardous waste management and reporting. · Performs backup shipping duties as needed.

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experience preferred, • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening, • The work is performed under general supervision, • Valid drivers' license and auto insurance required, • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR xT1FLE9SFz

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Quality team is focused on embedding quality into every part of the design and production process for Terran R. Not just inspecting at the end but influencing how things are built from the start. The team embeds themselves directly within design, manufacturing, test, and launch teams to stay close to the hardware, understand constraints, and proactively shape decisions. As we move beyond initial development into production and then scaled operations, now is the time to put the right processes, controls, and inspections in place without slowing down progress. The team plays a key role in balancing risk, driving a culture of ownership, and ensuring that speed doesn't come at the cost of reliability. Success here means building a quality system that scales with the Terran R program and Relativity as a whole. About the Role: • Perform receiving inspections of PCBA and quality assurance checks on avionics systems with its subassembly, components, wire harnesses and installations to ensure compliance with regulatory standards and company policies., • Maintain detailed inspection records and documentation to track the status and history of avionics components and systems., • Stay current with industry standards, regulations, and best practices related to avionics quality assurance and inspection processes., • Provide guidance and training to other team members on avionics quality inspection techniques and procedures., • Identify opportunities for process improvements and contribute to the development and implementation of quality initiatives within the organization., • Minimum 2 years of experience as a PCBA Inspector in a manufacturing environment, preferably in a quality function., • Proficient in inspecting solder joints, crimping, conformal coating, staking, and surface-mounted devices in accordance with NASA 8739 and/or IPC-J-STD-001, IPC-A-610 standards., • Knowledge of cable harness assembly and inspection following NASA-STD-8739.3 and 8739.4 and/or IPC-A-620 standards., • Experienced in conducting continuity test using DMM and inspection using portable measuring devices., • Familiar with avionics systems, components, and installations is essential, with the ability to interpret engineering drawings, technical manuals, and specifications., • Well-versed in process development and first-time quality efforts., • Highly organized and able to provide structure and direction to the previously undefined., • Experience leading projects or teams, even if not in a leadership role. Demonstrate the ability to take initiative and drive quality improvement efforts. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$29.88—$38.67 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job DescriptionDescription: Signia Aerospace is a global, integrated provider of high-performance systems and specialized components for the aerospace industry. Signia currently operates two complementary business segments: Thermal Management (key brands include ACE Thermal Systems and Mezzo Technologies) and Mission Systems (key brands include Onboard Systems, Lifesaving Systems, and Meeker Aviation). The Signia brands are leaders in their respective markets and provide a compelling value proposition to both aerospace and defense OEMs and end-users. Onboard Systems Hoist & Winch, located in Anaheim, CA is one of the world’s leading providers of Search & Rescue (SAR) and Human External Cargo (HEC) advanced mission equipment for civil, commercial, and military helicopters. Position Overview Location: Anaheim, CA (Onsite) This is a union position covered under a collective bargaining agreement. Starting pay is $25.00 per hour (day shift) and $27.50 (swing shift), per the union contract. The ability to pass a pre-employment background check and an FAA-regulated drug test is required. The Quality Inspector will be responsible for performing inspections, measurements, and tests on products throughout the production process. This role will also support quality engineering and management initiatives by collecting data, implementing corrective actions, and maintaining compliance. What You’ll Do • Perform inspections, measurements and tests of products during the receiving, in-process and final inspections in accordance with documented procedures and work instructions. Collect and record inspection and test results. Complete all required forms and documentation completely and accurately., • Support Quality Engineering and Quality Management by helping to assure compliance with the AS9100, ISO 9001, IPC 610 and IPC 620 and applicable FAA standards and regulations (Part 24 and Part 145, 8130-2’s), • Collect data used to generate key quality metrics that drive efforts to assure continual improvement of Onboard Systems processes and products, • Support the implementation and maintenance of effective corrective actions, as directed, to prevent failure recurrence of Onboard Systems products, • This position requires the ability to communicate in English, both verbally and in writing, to complete inspection reports and understand safety and quality standards., • Inspection experience of complex electro-mechanical parts, • Ability to read and comprehend complex documents to include, but not limited to, drawings, procedures, work instructions, forms and schematics, • Strong attention to detail, analytical skills, and problem-solving capabilities What’s In It for You • This position is part of union, offering negotiated benefits and protections. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status Requirements:

Job Description Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: On-site Hourly Range: $19.50 - $23.00, DOE Location: Chatsworth, CA Fralock is an engineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science, Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locations located throughout Northern and Southern California. VISION To be recognized by our customers as a leading solutions provider of proprietary engineered advanced materials for high reliability, severe environment, and technically challenging applications. MISSION To create value, profitably grow, and share our success with all stakeholders. CULTURE • Respect – We treat others the way they want to be treated., • Integrity – We practice a high standard of ethics in our business dealings with customers, suppliers, and employees., • Responsiveness – We have a sense of urgency in responding to internal and external requests and work proactively to solve problems., • Excellence/Competence – We empower our people to continuously improve and execute high quality work., • Teamwork – We work together to achieve Fralock business objectives by communicating at a high level, by listening and having clarity in our expectations of one another., • Individual Accountability and Personal Responsibility – We do what we have committed to do when we committed to doing it., • Continuous Improvement across all segments of the company This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. Main Functions Perform inspections, checks and tests for quality control for the manufacture of products. Interpret complex drawings, standards, procedures, and test data. Document results of inspections. Maintain calibration system. Typical Duties • Follow procedures, work, and inspection instructions in the job orders, • Perform inspections using CMM, Keyence, calipers, micrometers, or templates, • Work with Production/Receiving Inspection/Purchasing when parts are found out of tolerance, • Document results of inspections using First Article Report AS9102, customer-specific inspection documents, Fralock Dimensional Reports, copies of CMM report or written results in the job order, • Compare actual measurements to drawing tolerances using calibrated tools and inspection systems., • Perform visual inspections using IPC-A-600, IPC-A-610, and J-STD-001 criteria to assess workmanship, soldering, and cosmetic requirements., • Identify, tag, and document nonconforming items; coordinate with Quality and Engineering for resolution., • Issue certificate of conformance, • Maintain CMMs and inspection tools in good condition, including inspection stamp, • Perform calibration of calipers, micrometers and templates, and coordinates outside calibration, • Update and maintain Master Calibration List, • Inspect materials and components upon receipt to confirm documentation, certifications, and traceability meet requirements., • Conduct in-process checks to verify critical features and detect defects early in production., • Perform final inspections to confirm product readiness for shipment, including dimensional, visual, and functional checks., • Capture and upload inspection photos, ballooned drawings, and other evidence into QMS/ERP., • Participate in containment and root cause investigation activities when quality issues arise., • PC literate (Excel, Word, e-mail), • Knowledge in blueprint reading and geometrical tolerances; use of hand-held inspection tools and templates, • Minimum 2 years of quality inspection experience in a controlled manufacturing environment (aerospace, medical, or equivalent)., • Good communication skills both oral and written; English language proficiency for technical documentation and communication, • Proficiency in reading and interpreting engineering drawings and GD&T., • Familiarity with basic measurement tools and inspection equipment., • Competence in using MS Excel, Word, and ERP/QMS data entry., • Familiar with CMM inspection and Statistical Process Control (SPC), • Familiarity with ISO 9001/ AS 9100 and/ or ISO 13485 Standard, • Experience in Aerospace, Medical or Automotive industry, • Knowledge of IPC-A-600, IPC-A-610, and J-STD-001 standards., • Experience with flex/rigid-flex PCBs, SMT assemblies, or precision machined components., • Proficiency with vision systems, CMMs, and SPC tools., • AS9102 FAIR completion experience., • Knowledge in calibration Education Requirements High School Diploma Experience Requirements 2 years minimum in a quality related field Physical Requirements • Ability to multi-task, • Sitting/Walking/Standing, • Lifting in accordance with employee safety handbook Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of a position. Fralock provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Inspector Location: Burbank, CA Pay: $21.50 - $40.50 per hour ???? See our inspection team and workspace in action: Watch our video About the Job We’re looking for a skilled and experienced Inspector to join our Quality team. This role is hands-on and focused on dimensional inspections, first articles, and ensuring every part meets aerospace-level standards. You’ll work with both manual tools and advanced inspection equipment like CMMs and optical comparators. What You’ll Do * Perform dimensional inspections on machined and assembled products * Use calipers, blade and depth micrometers, bore gages, optical comparators, and CMMs * Read blueprints, engineering drawings, and planning documents * Perform First Article Inspections (FAI) and create reports per AS9102 * Conduct receiving, in-process, and final inspections * Inspect threads, bores, surface finishes, and overall part quality * Document results, discrepancies, and communicate issues clearly * Work with Production, Quality, and Engineering teams * Support quality improvement and R&D activities * Use software tools including 1Factory and MAP What You Bring * 1+ years of hands-on inspection experience (aerospace strongly preferred) * Advanced understanding of GD&T and blueprint reading * Comfortable operating manual and DCC CMMs (Preferred) * Familiarity with common inspection equipment and gage usage * Strong attention to detail and ability to work independently * High school diploma or GED required; technical training or equivalent experience (preferred) Physical Requirements * Able to stand, walk, reach, kneel, and crouch as needed * Lift and move up to 50 lbs regularly * Visual acuity for close inspection tasks Why Work With Us * Health Coverage: 100% paid medical, dental, and vision for employees * 401K + Profit Sharing * Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years * 7 Paid Holidays * Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts * Career Growth: On-the-job training, cross-training, and up to $1,000/year for continuing education ???? Apply today and bring your quality skills to a company that values precision, improvement, and teamwork. Learn more about our benefits 6:30 AM – 3:00 PM, Monday to Friday (with overtime opportunities)

Job DescriptionDescriptionVenturi Astrolab, Inc. (Astrolab) is pioneering new ways to explore and operate on distant planetary bodies. We are singularly focused on designing, building, and operating a fleet of multi-purpose commercial planetary rovers to extend and enhance humanity’s presence in the solar system. We are seeking motivated, creative, and exceptional people to join our world-class team. We are seeking a meticulous and experienced Quality Inspector to uphold the highest standards of quality for our products. The Quality Inspector will perform detailed inspections at various stages of production, including receiving, in-process, and final inspections, ensuring compliance with technical drawings, specifications, and industry standards. This role requires proficiency with precision measurement tools and a keen eye for detail to identify defects and ensure product integrity. What you'll do: • Receiving Inspections including incoming packages for gross damage; verification of part number, revision, quantity, and proper Quality Clause documentation per the supplier Quality Manual; dimensional verification to the print and other specification callouts like part marking, etc., • In-Process & Final Inspections including closeout reviews for proper installation, wiring, and functionality; ensure no foreign object debris is present; validate revision, part numbers, flight pedigree, and lot serial numbers; visual inspections for damage; validate conformance to drawing specifications; review test packages; and confirm all contract deliverables are met, • Lead calibration for the organization, • Build procedure review and approval, • Material review board process includes issue ticket review and physical part movement, • Proven experience in quality inspection, preferably in an Aerospace manufacturing or technical environment, • Blueprint reading and GD&T knowledge, • Proficiency with precision measurement tools (calipers, micrometers, height gauges, and bore gauges), • Familiarity with industry standards and technical documentation, • Strong attention to detail and ability to interpret engineering drawings and specifications, • Excellent problem-solving skills and ability to work independently or as part of a team, • Basic computer skills for data entry and documentationWork Environment, • This role may involve standing for extended periods and working in a production or warehouse setting, • Join a team of best-in-class engineers building the foundation of planetary surface exploration, • Equity ownership in the company, • Comprehensive health benefits, including medical, dental, vision, and mental health support, • 401(k) plan with company match, • Flexible PTO and parental leave, • Home office set-up reimbursement, • Fully flexible and remote-friendly work environment, • Weekly lunch stipend, plus complimentary snacks and beverages on-site, • Twice a month, social hour on-site with food and drinks

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule This is a 3 - 4 x 11 rotating shift working alternating Wednesdays. Shifts Available • Sun - Wed 1st shift (5am - 4:30pm), • Sun - Wed 2nd shift (4pm - 3:30am), • Wed - Sat 1st shift (5am - 4:30pm) The Role • Conduct receiving, in-process, and final inspections to ensure conformance to the requirements., • Perform inspections utilizing engineering drawings, standard procedures, calibrated manual gages/tools, and various inspection methods., • Record and maintain accurate data including inspection results, non-conformance reports (NCRs), and other quality documentation., • Collaborate with cross-functional teams to resolve quality issues and implement corrective/preventive actions., • Create and maintain inspection files, interpret results, and produce complete, accurate inspection reports., • Assist Leadership with other various inspections and inspection-related tasks., • Keep the Metrology Lab clean, organized, and safe following 5S principles., • Use metrology Scanners, such FARO, Romer, Creaform C‑Track, MetraSCAN, GOM ScanBox, to acquire geometrical scan data., • Process raw scan data, remove noise, and export files using comprehensive 3D metrology software such as PolyWorks & Zeiss. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • At minimum 1 to 2 year of experience in a Quality inspector role in an aerospace, automotive, or other relevant production environment, • High‑school diploma (required)., • Proficient computer literacy (Windows, Teams, Excel, etc.)., • Ability to read and understand engineering drawings, including knowledge of GD&T, • Ability to lift parts up to 50 lb and operate scanning arms for extended periods., • Strong verbal and written communication skills., • Team‑oriented mindset with high attention to detail., • Ability to analyze and solve complex problemsPreferred Qualifications, • Associate or higher degree in a technical field or equivalent work experience, • Background interfacing with Quality, Engineering, and Production teams, • Experience in regulated or high-performance manufacturing environmentsWork Environment, • Occasionally exposure to noise, machinery, welding, machining, hot surfaces, and airborne particles., • Requires frequent standing, walking, bending, reaching, and handling of precision tools and materials., • Must lift up to 40 lbs. independently and 50 lbs. with assistance., • May involve crouching, climbing, confined spaces, or work at heights., • PPE (including but not limited to safety glasses, hearing protection, gloves, respirators as needed) and company uniform are required., • TCH 02: $23.00 - $32.00/hour, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Dahl Insurance Agency in Northridge, CA is looking for one insurance producer to join our 6 person strong team. We are located on 9836 White Oak Ave Suite 109. Our ideal candidate is a self-starter, punctual, and engaged. Benefits By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description The Shift Manager is responsible for overseeing the daily operations of a shift. It develops and implements production standards that will globally improve efficiency of operations in the press, corn and chip departments through effective implementation of service to sales, cost reduction, inventory, safety, GMP and Quality program procedures. They will serve as a liaison between upper management and line employees, ensuring that all activities are conducted in compliance with internal and external regulations. • Must be familiar with the quality system requirements of the plant., • Ensure that all activities of the process are conducted within the specifications., • Responsible for verifying and control that Flour/Corn production KPI’s (Yield, Waste, Overweight, Efficiency, Labor, etc.) are within or better than budget., • Serve as a liaison between management and line employees., • Ensure that all duties are performed following GMPs., • Responsible for communicating the production schedules to the Supervisors/Leads., • Report any discrepancy in the documentation (work instructions, charts, forms, etc.), • Responsible of the revision of the training needs and for the training for the Supervisors and employees in the different areas, and to keep records. (AIB, training, Safety, etc.), • Responsible for Department safety., • Resolve process problems., • Perform safety and sanitation inspections and keep records., • Resolve problems between employees and document any disciplinary actions., • Controls budget through reduction and control of overtime and manages receiving budget within operational procedures., • Participates with Safety, Sanitation, Quality and new products Committees & actively participates in the HACCP Team, responsible for but not limited to Internal auditing, training, implementation, and corrective actions., • Verifies GMP’s and Safety standards are maintained at all times and act and/or follow-up when deficiencies are noted., • Consistently apply company rules per employee handbook and company policies (i.e. attendance, safety, etc.) and ensure safety regulations, policies and procedures are followed., • Ensures compliance with the HACCP program and AIB gold standard., • Ensures all food safety principles and legal requirements have been applied effectively., • Other duties, as assigned. EDUCATION & EXPERIENCE Bachelor’s degree in manufacturing management, Engineering, Business, or related field required. 5 years of production experience required in a manufacturing environment. Bakery or food/beverage manufacturing preferred. With a minimum of 3 years of experience in a supervisory/managerial capacity required in a manufacturing environment. * Any equivalent combination of related education and/or experience may be considered for the above. KNOWLEDGE, SKILLS, ABILITIES Experience in manufacturing management roles with proven track record in leading manufacturing teams to improve continuously the efficiency of production methods and, ultimately, the quality of products. • Experience and exposure to regulatory inspections (AIB, OSHA, MILITARY, Health Dept., EPA, City & County Inspectors), • Experience with Quality Systems and Programs, • Experience with manufacturing safety concepts, applications, and committees., • Familiar with Good Manufacturing Practices, LEAN Manufacturing, 5's, World Class Manufacturing and/or Six Sigma., • Team management/leadership/development skills, including the ability to manage people in an organization matrix and get the best out of them., • Maturity, self-confidence, and effective communication skills., • A multicultural approach to operating in a diverse business environment., • Budget preparation and Cost analysis, • SAP knowledge preferred., • Effectively communicate in Spanish and English both verbal and written (Required), • Be able to walk long distances and to be on his/her feet for extended periods of time., • Able to work in dusty, noisy, hot, cold, and small areas. Shift: 3rd Salary Range: $88,000.00 - $91,000.00 plus $7k annual Bonus Our Full Benefits Package includes Medical, Dental, and Vision insurance, Life insurance and AD&D Insurance, Short-Term and Long-Term Disability Insurance, and Flexible Spending Accounts. Additionally, we offer a 401(k) plan with matching, Paid, shoe allowances, Vacation Pay and 7 Paid Holidays. Employees also benefit from an employee discount program on products. *This position is eligible for relocation assistance. Gruma Corporation and its affiliates, including but not limited to Azteca Milling, L.P., are committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin, ancestry, sex, gender, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, gender expression, marital status, or any other legally recognized protected basis under federal, state, or local law. The information collected by this application is solely for the purposes of determining suitability for employment, verifying your identity, and maintaining employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act as well as state and local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Gruma. Please inform the company's personnel representative if you need assistance completing any forms or to otherwise participate in the application process. Company DescriptionAt Mission, we believe that good food can take you places. From our humble beginnings as a small tortilla factory in the San Fernando Valley of Los Angeles to becoming a global brand recognized worldwide, we’ve always strived to help you explore the endless possibilities of tortillas and tortilla chips. Since 1977, Mission® has been creating fresh, authentic Mexican food products you can find in your local grocery store including Guerrero, Maseca and Calidad to name a few. Mission®, a subsidiary of Gruma Corporation, is the #1 tortilla company in the U.S. and manufactures a variety of authentic Mexican products. As we’ve grown, we’ve made sure to always put an emphasis on authentic flavors, while providing healthy options that families and friends can enjoy together.At Mission, we believe that good food can take you places. From our humble beginnings as a small tortilla factory in the San Fernando Valley of Los Angeles to becoming a global brand recognized worldwide, we’ve always strived to help you explore the endless possibilities of tortillas and tortilla chips.\r\n\r\nSince 1977, Mission® has been creating fresh, authentic Mexican food products you can find in your local grocery store including Guerrero, Maseca and Calidad to name a few. Mission®, a subsidiary of Gruma Corporation, is the #1 tortilla company in the U.S. and manufactures a variety of authentic Mexican products. As we’ve grown, we’ve made sure to always put an emphasis on authentic flavors, while providing healthy options that families and friends can enjoy together.

Job DescriptionCX2 is a next-generation defense technology company founded to deliver spectrum dominance for the United States and our allies. CX2’s AI-enabled hardware and software platforms detect, disrupt and defend the electromagnetic spectrum across land, air, sea and space domains. We're seeking a detail-oriented and highly organized Logistician to own and manage the logistics and sustainment lifecycle of our hardware programs. You’ll be responsible for ensuring that critical parts, assemblies, and support packages are delivered on time, field-ready, and aligned with customer requirements. This role sits at the intersection of engineering, manufacturing, and field operations—making sure the systems we build are operationally viable and supportable at scale.Overall Responsibilities • Lead logistics execution with a strong emphasis on compliance, traceability, and auditability across receiving, inventory management, warehousing, and shipment throughout the lifecycle., • Own receiving operations, ensuring all inbound materials are verified against purchase and shipping documentation, inspected for condition, serialized or lot-controlled as required, and accurately recorded in inventory systems., • Maintain inventory integrity through strict controls including serial number and lot tracking, controlled issue and return processes, cycle counts, reconciliation, discrepancy investigations, and corrective action documentation., • Manage warehouse operations to ensure secure storage, material segregation, access control, environmental compliance, and handling procedures consistent with military logistics and quality standards., • Oversee domestic and international shipping activities in accordance with U.S. and foreign transportation regulations, customs requirements, export controls, and contractual obligations., • Ensure compliant handling and shipment of ITAR-controlled, sensitive, or classified hardware in alignment with DoD, DDTC, and program-specific security requirements., • Develop, maintain, and audit logistics documentation and records, including bills of lading, export documentation, receiving reports, inventory records, and chain-of-custody artifacts to support internal and external audits., • Collaborate with engineering and manufacturing teams to ensure logistics, packaging, handling, provisioning, and sustainment requirements are defined early and aligned with Integrated Logistics Support (ILS) and military sustainment practices., • Establish, document, and continuously improve logistics, warehouse, and inventory control procedures, ensuring alignment with defense industry best practices, contractual requirements, and audit standards.Required Qualifications, • A minimum of 5 years of experience in logistics or ILS roles—preferably in the aerospace, military, defense, or high-reliability hardware industry., • Experience supporting DoD programs or working within a defense contractor environment., • Strong understanding of MIL-STD, DFARS, ITAR, and government logistics requirements., • Hands-on familiarity with logistics software, ERP tools, and inventory tracking systems., • Clear, structured communicator with a bias for operational excellence and a high standard of precision., • Comfortable working in a fast-paced, startup environment where process is evolving and speed matters., • Current Secret/Top Secret Clearance or an ability to obtain and maintain a U.S. Security clearance.ITAR Restrictions, • To Conform to US Government Regulations, applicant must be a U.S. Citizen or National or U.S. lawful, permanent resident (aka green card holder), or be eligible to obtain the required authorizations from the U.S. Department of State. Note: Those currently on OPTs and/or H1Bs do not currently qualify for ITAR. Learn more about the ITAR here.Bonus Points, • Prior experience standing up logistics or sustainment operations for a new product line or program., • Experience supporting forward-deployed operations or rapid fielding of military systems., • Familiarity with classified material handling and secure shipment procedures.What We Offer, • Competitive salary, stock options and benefits, including health, vision and dental., • 401K enrollment at 90 days., • Generous PTO + most Federal Holidays observed., • Collaborative and inclusive work environment., • Access to the latest tools and technologies., • High levels of responsibility and autonomy., • Professional growth and development opportunities.

Job Description Staff Accountant – Growth Opportunity Torrance, CA Full-Time | Career Advancement Robert Half is partnering with a growing and stable organization in Torrance that is known for promoting from within. This is an excellent opportunity for a motivated Staff Accountant who wants hands-on experience, exposure to leadership, and a clear path for advancement. If you are detail-oriented, analytical, and ready to grow your accounting career in a collaborative environment, this role offers both stability and upward mobility. Responsibilities • Process vendor invoices, match purchase orders and receiving documentation, and accurately record transactions, • Review and process employee expense reports, • Coordinate monthly credit card reconciliations and resolve discrepancies, • Manage fixed assets including additions, disposals, depreciation, and annual physical counts, • Maintain Construction-in-Progress (CIP) accounts and project documentation, • Perform monthly general ledger reconciliations (AP, fixed assets, and related accounts), • Assist with journal entries and month-end close activities, • Support quarter-end and year-end audits by preparing documentation and working with external auditors, • Assist with compliance reporting including sales tax and corporate tax filings, • Perform additional accounting duties as assigned Qualifications • Bachelor’s degree in Accounting or Finance, • 2+ years of accounting experience, • Strong understanding of GAAP principles, • Experience with accounts payable, general ledger reconciliations, and fixed assets, • Proficiency in Excel and accounting systems, • Strong analytical, organizational, and communication skills, • Company promotes from within, • Exposure to leadership and cross-functional teams, • Stable and growing organization, • Supportive team environment • Bachelor's Degree in Accounting or Finance with at least two years of relevant work experience., • Proficiency in Microsoft Excel and other Microsoft Office applications, along with familiarity with accounting software., • Strong attention to detail and ability to meet strict deadlines., • Flexibility to adapt to changing schedules when necessary., • Excellent communication skills for effective collaboration with team members and external partners., • Analytical abilities to solve complex accounting issues and ensure accuracy in financial reporting., • Knowledge of corporate tax, sales tax, and general ledger systems., • Experience with accounts payable processes and fixed asset accounting.

Job Description Overview PowerShopper Corp - Who We Are PowerShopper Corporation is a privately owned wholesale distributor and online eCommerce retailer. We operate a medium-sized sales and distribution operation based in Pasadena, California. We rely heavily on our personnel and their ability to problem solve with respect to all aspects of our operations, ranging from packing and shipping, to customer service, to online sales. We consist of a small staff that has overlapping responsibilities, and are in search of persons comfortable working both roles of customer service as well as working interchangeably in our warehouse. Responsibilities Customer Service Day to day operations for our customer service role include the following: * Able to type 30 WPM. * Comfortable taking inbound sales calls. * Able to learn our product lines and communicate to customers. * Some technical proficiency with Microsoft Office, particularly Outlook and Excel. * Basic arithmetic skills are required. * Able to file documents electronically, self-organization, and self-management. Warehouse Operations Day to day operations for our warehouse role include the following: * Able to comfortably lift 50 lbs or more. * Unpacking and receiving large shipments. * Organizing and maintaining a clean and organized work environment. * Pulling, packing, and scanning of products. * Creating shipping labels. * Creating shipping quotes. * Uploading tracking into order fulfillment system on a timely basis. Our standard hours of operation are Monday through Friday, 8AM to 5PM PST and we are closed on the weekends. Company DescriptioneCommerce retail and distribution warehouse specializing in pet products.eCommerce retail and distribution warehouse specializing in pet products.

Job Description ADMINISTRATIVE ASSISTANT- FLOORING General Flooring Contractor seeking highly organized individual for an administrative assistant position. $21-$23 Per Hour Responsible for the following duties. -Answer phones and support client needs. -Prepare communications to include, memos, emails, invoices, reports, estimates, follow up responses both written and verbal, and other correspondence as needed. -Process necessary information through job runner. -Prepare and edit documents to include letters, reports, instructional documents and others. -Assist team in processing SOP’s. -Receive and process PO’s. -Create work orders for sub-contractors when jobs are scheduled. -Communicate with customers regarding daily and upcoming schedules and keep them informed of job progress with all standard jobs. -Ensure existing customers are receiving the service in which they need and are satisfied with RCS. -Purchasing of materials, inventory control, ordering and processing through the receiving of inventory. -Basic Accounts receivable functions. -Create quotes/bids for clients and contractors. -Process payables & payroll for subcontractors. -Other duties as needed by management. Strong Candidates will exhibit the following: o Bilingual, Spanish Speaking a plus o MS Office/PC proficient o Flexible, resourceful, and intuitive o Ability to set priorities in a fast-paced environment o Strong work ethic o Organized & detail oriented Company DescriptionEstablished in 1989, Regal Commercial Services is the premier flooring and construction contractor in the So. Cal. marketplace.Established in 1989, Regal Commercial Services is the premier flooring and construction contractor in the So. Cal. marketplace.

Job DescriptionManufacturing Operations Manager Salary Range: $89,400 - $130,160 Annual Incentive Eligible Position Overview The Manufacturing Operations Manager will lead all operating departments at the Ceilings Plus plant, including production scheduling, manufacturing, and shipping/receiving. This role oversees 1 Manager, 3 General Foremen, 1 Hourly Supervisor, and approximately 90 hourly employees. The ideal candidate will drive operations excellence through leadership, safety, efficiency, and continuous improvement. Key Responsibilities * Ensure all products produced meet or exceed customer expectations for quality and delivery. * Train, motivate, and maintain a high level of safety awareness among all department employees. * Recognize employee strengths and development needs; provide coaching and create training plans for workforce flexibility and efficiency. * Develop succession plans to ensure long-term organizational stability. * Implement strategies to achieve key performance metrics: safety, cost, quality ratings, and on-time delivery. * Ensure compliance with USG policies, best practices, and standard operating procedures. * Support and implement LEAN strategies; coach employees on continuous improvement tools and processes. * Build strong relationships with manufacturing, reliability, engineering, project management, product management, sales, and customers. * Drive advancement in automation and technology to improve plant performance and product reliability. * Promote innovative safety initiatives and maintain high housekeeping standards. * Assist the Plant Manager with special tasks or projects as required. Qualifications: * Bachelor’s degree in Engineering, Business Management, Construction Management, or related field (preferred). * 7 - 10 years minimum job-related experience required. * 4-5 years of management experience required. * Proven leadership skills with a track record of motivating and developing teams. * Strong organizational, communication, and public speaking skills. * Knowledge of safety compliance programs and continuous improvement methodologies. * Excellent problem-solving and critical thinking abilities; strategic mindset. * Ability to build rapport across all levels and champion talent management and retention initiatives. Rate of pay may be adjusted based on the qualifications and experience of the candidate. USG employees enjoy a number of benefit options for themselves and their families. These include two medical insurance options, as well as vision and dental coverage. The cost of these optional programs varies based on coverage level - employees generally pay 25% of the monthly premium cost, USG pays the rest. These coverage options are offered on the first day of employment with no waiting period. Additionally, USG employees enjoy both a 401(k) Investment Plan with company match and a pension plan. Beyond these main features, employees may also choose from a number of additional programs like life insurance, accident insurance, legal insurance, even pet insurance, just to name a few. USG also offers Quarterly (hourly) / Annual (salary) bonus potential for all employees based on performance metrics tied to safety, quality, and productivity. USG also provides employees with paid time off and paid holidays. Since 1902, Chicago-based USG has been a leader in producing innovative, award-winning products and systems to build everything from major commercial developments and residential housing to home improvements. USG's employees are committed to the highest levels of customer satisfaction and quality in everything we do. Our steadfast commitment to the company's core business values – innovation, quality, integrity, service, diversity, efficiency and safety – have helped us become the company we are today. EOE including disability/veteran

Job DescriptionJob Title: Office Assistant – Construction TechnologyAbout DirtPrep At DirtPrep, we’re transforming the construction industry through cutting-edge technology that brings clarity, efficiency, and data-driven decision-making to job sites. We combine boots-on-the-ground experience with innovative digital tools to support contractors, developers, and engineering teams nationwide. We’re growing fast—and we’re looking for an Office Assistant who thrives in a dynamic environment. Position Summary The Office Assistant plays a pivotal role in supporting both the operations and sales functions at DirtPrep. You’ll be responsible for ensuring smooth office workflows, assisting the sales team with administrative needs, and helping keep client communications and project documentation organized. If you're detail-oriented, tech-savvy, and comfortable navigating both construction lingo and digital tools, this role is for you. ResponsibilitiesOperations Support: * Maintain organized filing systems (digital & physical) for shipping/receiving, rentals, training, and compliance materials * Assist with invoice processing, PO tracking, and scheduling service appointments * Support job site demo and installation coordination logistics (deliveries, scheduling, communications) * Monitor inventory of office and field supplies; coordinate reorders and deliveries * Other duties as assigned Tech Sales & Admin Support: * Answer incoming calls, schedule product demos, team meetings, and travel for the sales team * Assist with updating CRM records (e.g., Salesforce, HubSpot), generating reports, and tracking leads * Prepare and send client proposals, service agreements, and onboarding documentation * Manage internal documentation: templates, SOPs, and presentation materials Requirements * Administrative experience, ideally in construction, sales, or technology * Strong written and verbal communication skills * Proficient in Microsoft Office, Google Workspace, and comfortable with CRM tools (Zoho experience a plus) * Detail-oriented with strong time management and multitasking abilities * Positive, solutions-driven attitude and ability to adapt to fast-changing priorities Physical Requirements * Must be able to lift and carry up to 40 pounds occasionally (e.g., office supplies, equipment, or documents). * Ability to operate a computer and other office productivity equipment, such as printers, scanners, and copiers. * May occasionally need to ascend/descend stairs, bend, kneel, or reach overhead. * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What We Offer * Competitive compensation * Employer provides free individual healthcare and offers dental insurance, vision insurance, and 401(k) matching * Paid time off, sick leave, and company holidays * A tight-knit team of doers and builders * Career growth path into administrative leadership, within sales ops, or customer success teams Want to help modernize one of the most important industries in the world? Come build with us at DirtPrep!

Job Description Turner’s Outdoorsman is looking for a CASHIER to process all store transactions with customers accurately and efficiently using a cash register. Our Cashier is responsible for operating a cash register, processing customer sales by scanning items, collecting payment, processing returns, providing change, bagging purchases, cross-sell and introduce new products, addressing basic inquiries at the checkout counter, and ensuring accurate transactions while delivering friendly customer service. JOB DESCRIPTION: • Welcome customers entering or leaving the store, answer their questions, help them locate items, and provide recommendations. Provide a positive customer experience with friendly, courteous service., • Operating the point-of-sale (POS) system, processing payments, handling returns and managing customer transactions efficiently and accurately. Prove a receipt to every customer., • Maintain a clean, organized, and visually appealing cash counter, including restocking shelves, arranging displays, and ensuring product areas meet merchandising standards., • Follow all store procedures regarding coupons, gift cards, or the purchase of specific items, such as guns or ammo., • Collaborate with fellow team members to achieve sales targets, meet store and individual sales goals and contribute to a positive team environment. Cross-sell and introduce new products., • Understand and actively participate in the promotion of current sales, promotions, and programs to enhance the customer experience and drive sales, • Answer customer inquiries regarding products, store policies, and services, providing knowledgeable and helpful responses to enhance satisfaction., • Creates customer orders., • Complete all necessary firearms paperwork in compliance with legal requirements., • Maintain a constant awareness of firearm safety., • Support loss prevention efforts by monitoring the sales floor, report suspicious activity, and follow security policies, • Assist management with handle loading and unloading of trucks and stock merchandise deliveries., • May fill customer fishing reels using special machines and knot-tying techniques., • Assist in inventory management tasks, including receiving shipments, conducting stock counts, and reporting low stock or product discrepancies to management., • Attend training seminars, including those held off-site., • Perform additional duties as assigned. QUALIFICATIONS: • Legally eligible to work in a firearm environment. - DOJ Certificate of Eligibility Required, • Ability to work a flexible schedule, including weekends, holidays, and occasional evenings., • Strong interpersonal and communication skills to interact effectively with customers and team members., • Work experience as a Retail Cashier preferred but not required., • Familiarity with cash register or other point-of-sale system (POS), • Prior retail or sales experience preferred but not required., • Good communication and interpersonal skills, • Fluent in English, • High School graduate or GED certificate • Knowledge about Hunting, Fishing, or Shooting sports is preferred., • Prior retail and cash handling preferred., • Previous customer service experience preferred. PHYSICAL REQUIREMENTS • Responsible for loading/unloading trucks, lifting up to 50 pounds without assistance., • Must be able to stand, sit, bend, and lift throughout the course of a scheduled shift., • Hours- varied, varied-OT may be required. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Turner's Outdoorsman is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Job Description Under the supervision of the Facilities Director and the Facilities Manager, the incumbent is responsible for the safe delivery of Materials and Vehicles to St. John’s clinics. Benefits: • Free Medical, Dental & Vision, • 13 Paid Holidays + PTO, • 403 (B) retirement match, • Life Insurance, EAP, • Tuition Reimbursement, • SEIU Union, • Flexible Spending Account, • Continued workforce development & training, • High school diploma or GED required., • Experience planning trips/delivery routes using online mapping sites, GPS location devices/smartphones, and maps; Clean driving record, verified through CA Department of Motor Vehicles records., • Load, unload, and deliver pharmacy crates to assigned St. John’s clinics., • Follow procedures for receiving and delivering prescriptions, including giving and receiving appropriate signatures when picking up or dropping off., • Plan delivery route to maximize efficiency and productivity for the day., • When needed, drive St. John’s mobile health clinics. This requires a Class A license., • Carefully complete all required paperwork., • Report potential vehicle problems including urgent repairs, delayed regular maintenance, and equipment wear and tear., • Take company vehicles in for maintenance and/or repair., • Follow all traffic laws, taking care to avoid all accidents and/or moving violations., • Report any vehicle damage, regardless of severity, to Facilities Manager., • Attend meetings, trainings, and other work-related events as needed., • Other duties may be assigned or may be modified as business needs dictate.St. John’s Community Health is an Equal Employment Opportunity Employer

Job Description Join the movement! Erewhon market is trailblazing in the health and wellness industry, and we’re rapidly expanding! Our culture comes from unstoppable leaders, inspiring staff, and the best food and wellness products on the planet. 10+ locations and growing. What we offer: • $20.25 - $25 / hour (based on experience), • 50% off organic meals daily, • 20% off in-store purchases, • Bonuses and sales rewards (for some departments), • HUGE opportunities for career growth, • Follow established produce departmental procedures for receiving merchandise including inspecting the product when delivered, pricing the product and restocking cases to insure freshness and quality, accuracy and product rotation., • Provide excellent customer service and address needs of customers in a timely and effective manner., • Ensure a fresh and appealing produce display by keeping cases and shelves clean and well stocked by front-facing, checking codes, rotating, and removing out-of-date products., • Maintain accurate produce department signage and pricing., • Stock and clean produce shelves and displays., • Maintain produce back stock in good order., • Maintain a safe, clean and well-organized working and shopping environment., • Follow and comply with all applicable health and sanitation procedures and adhere to safe work practices., • Operate and sanitize all equipment in a safe and proper manner., • Previous experience in produce department and stocking/care of organic produce products required., • Good communication skills., • Effective time management skills. Erewhon Market is an equal opportunity employer and we are committed to Equal Employment Opportunity regardless of race, color, national origin, gender, sexual orientation, age, religion, veteran status, disability, history of disability or perceived disability, and per the Fair Chance Ordinance will consider qualified applications with criminal histories in a manner consistent with the ordinance. To all recruitment agencies: We do not accept unsolicited agency resumes and are not responsible for any fees related to unsolicited resumes. By applying, you agree to Erewhon's Notice of Collection policy and all its terms and conditions:

Job Description Join the movement! Erewhon market is trailblazing in the health and wellness industry, and we’re rapidly expanding! Our culture comes from unstoppable leaders, inspiring staff, and the best food and wellness products on the planet. 10+ locations and growing. What we offer: • $19 - $25 / hour (based on experience), • 50% off organic meals daily, • 20% off in-store purchases, • Bonuses and sales rewards (for some departments), • HUGE opportunities for career growth, • Follow established produce departmental procedures for receiving merchandise including inspecting the product when delivered, pricing the product and restocking cases to insure freshness and quality, accuracy and product rotation., • Provide excellent customer service and address needs of customers in a timely and effective manner., • Ensure a fresh and appealing produce display by keeping cases and shelves clean and well stocked by front-facing, checking codes, rotating, and removing out-of-date products., • Maintain accurate produce department signage and pricing., • Stock and clean produce shelves and displays., • Maintain produce back stock in good order., • Maintain a safe, clean and well-organized working and shopping environment., • Follow and comply with all applicable health and sanitation procedures and adhere to safe work practices., • Operate and sanitize all equipment in a safe and proper manner., • Previous experience in produce department and stocking/care of organic produce products required., • Good communication skills., • Effective time management skills., • Ability to consistently lift 35 - 50 lbs, unaided Erewhon has many opportunities for career development and growth as we expand across Southern California with ten current stores (Beverly Hills, Calabasas, Culver City, Grove (Fairfax), Pasadena, Manhattan Beach, Santa Monica, Silver Lake, Studio City, and Venice) and a few more stores coming soon including West Hollywood! Erewhon Market is an equal opportunity employer and we are committed to Equal Employment Opportunity regardless of race, color, national origin, gender, sexual orientation, age, religion, veteran status, disability, history of disability or perceived disability, and per the Fair Chance Ordinance will consider qualified applications with criminal histories in a manner consistent with the ordinance. To all recruitment agencies: We do not accept unsolicited agency resumes and are not responsible for any fees related to unsolicited resumes. By applying, you agree to Erewhon's Notice of Collection policy and all its terms and conditions: