Welder jobs in Burbank, CaliforniaCreate job alerts

Job Description Job Title: TIG Welder Job Description This role focuses on precision TIG welding of small hand-sized components for aerospace and defense applications, primarily using aluminum and stainless steel. You will interpret welding symbols, follow strict quality standards, and contribute to the production of high-reliability parts in a manufacturing environment. Responsibilities • Perform high-quality TIG welding on small parts approximately the size of a hand for aerospace and defense products., • Weld primarily on aluminum components, with additional work on stainless steel and other alloys as needed., • Read and interpret welding symbols and technical drawings to ensure accurate weld placement and specifications., • Use appropriate welding techniques for aluminum and stainless steel, maintaining consistent weld quality and appearance., • Follow established procedures, standards, and specifications, including applicable aerospace welding requirements., • Handle, position, and secure small parts and assemblies prior to welding., • Inspect welds visually and functionally to verify quality and conformance to requirements., • Support fabrication activities that relate to welding, including fitting, tacking, and basic preparation of parts., • Lift and move materials weighing up to 25 pounds on a regular basis., • Stand for the majority of the shift while performing welding and related tasks., • Communicate clearly with supervisors and teammates to coordinate work and address issues., • Work overtime and Saturday shifts as required to meet production and customer deadlines., • Adhere to all safety policies and maintain a clean, organized work area in a manufacturing environment. Essential Skills • Experience with TIG welding in a manufacturing or fabrication environment., • Ability to TIG weld on aluminum and stainless steel components., • Ability to read and interpret welding symbols and related technical information., • Strong attention to detail and commitment to producing high-quality welds., • Good communication skills with proficiency in English., • Ability to lift up to 25 pounds on a consistent basis., • Ability to stand for the majority of the workday., • Willingness and ability to work overtime and Saturdays as needed. Additional Skills & Qualifications • Previous welding experience is a strong plus but not strictly required., • Experience welding aerospace components or small precision parts., • Familiarity with welding aluminum, stainless steel, Inconel, and titanium., • Knowledge of MIG welding processes in addition to TIG welding., • Experience working to aerospace welding standards such as D17.1., • Professional experience in fabrication environments, particularly aerospace manufacturing., • Bilingual skills in Spanish are a plus but not required. Why Work Here? You will join a long-established organization that has operated for nearly seven decades without layoffs, providing a sense of security and stability. The company offers guaranteed hours, regular opportunities for pay increases, and clear paths into leadership roles, including advancement within the die cast department for high performers. Many workers have built successful long-term careers here and report strong satisfaction with the environment. Performance-based bonus programs, paid out monthly and tied to company results, create additional earning potential for those who excel. Work Environment This position is based in a large aerospace manufacturing facility with more than 2,500 employees on site. You will work primarily on a first shift schedule, typically from 6:30 a.m. to 4:00 p.m. on weekdays, with Saturday hours from 6:30 a.m. to 12:30 p.m. as needed. The role requires working on your feet for most of the day in a production setting, handling small parts and operating welding equipment. The environment is fast-paced and production-oriented, with a focus on safety, quality, and adherence to aerospace standards. Job Type & Location This is a Contract to Hire position based out of Glendale, CA. Pay and Benefits The pay range for this position is $20.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Glendale,CA. Application Deadline This position is anticipated to close on Jul 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Temporary Welder (MIG & TIG) – 3-Month Contract. Location: Glendale, CA. Duration: Temporary – 3 Months. Start Date: ASAP. Employment Type: Contract / Temporary. Schedule: 7:30am-4:00pm. Job Description: We are seeking a skilled and reliable Welder for a 3-month temporary assignment. The ideal candidate will have hands-on experience with MIG and TIG welding and be able to produce high-quality welds while following safety and quality standards. Key Responsibilities: • Perform MIG and TIG welding on various metal components., • Read and interpret blueprints, drawings, and work instructions., • Set up and operate welding equipment safely and efficiently., • Inspect completed welds to ensure quality and accuracy., • Maintain a clean and safe work environment., • Follow all workplace safety procedures and guidelines. Requirements: • Proven experience with MIG and TIG welding., • Background in Aerospace/Defense is a PLUS!., • Ability to weld sheet metal, steel, aluminum, and/or stainless steel (as applicable)., • Ability to read technical drawings and measurements., • Strong attention to detail and workmanship., • Ability to work independently and meet deadlines., • Welding certification is an asset but not required. Compensation: • Competitive hourly rate based on experience. How to Apply: Interested candidates should submit their resume and relevant experience to jobs@smp-eng.com.

Job DescriptionBurrtec is a well-established refuse and recycling collection company serving over fifteen municipalities throughout Southern California and employing over 1,400 full-time employees. Burrtec continues to grow through company acquisitions and successful bid proposals. It is a family-owned company that firmly believes the key element to its success is knowing how important each employee is in the organization. We are seeking to fill an Equipment Maintenance Helper position for the Burbank Recycling/Material Recovery Facility location. Position Summary: Perform inspections, cleaning, maintenance, and repairs of Material Recovery Facility equipment. ESSENTIAL DUTIES: • Follow safe work practices and adhere to all safety rules and practices., • Assist and support Equipment Maintenance team and activities., • Perform inspections, cleaning, maintenance, and repairs of Material Recovery Facility equipment, including balers, conveyors, screens, magnets, etc., • Perform repair and maintenance of facility building and grounds, • Use hand tools and other equipment for the performance of these activities, • Use a welder, torch, and grinder in the performance of their job, • Work in support of the Equipment Maintenance team and independently on smaller jobs/tasks, • Timely and accurately document work performed on Fleetmate work orders, • Perform other repairs and duties as assigned by management. KNOWLEDGE, SKILLS, AND ABILITIES: • Good interpersonal skills, • Good mechanical and electrical skills, • Good verbal and written communication skills., • Good judgment skills., • Good organizational and cleanliness skills to ensure a safe and organized work area., • Use hand tools, portable power tools, and other equipment as needed. TRAINING AND EXPERIENCE: • One (1) year of previous equipment maintenance and repair experience required, • Vocational school and/or training in equipment maintenance and repair preferred, • Previous experience in the use of hand and small power tools/equipment. PHYSICAL: • Must be able to stand, bend, stoop, and kneel for long periods of time., • Must be able to lift to 50 lbs. WORKING CONDITIONS: • Will be exposed to moderate noise and dust levels., • Work in outdoor areas and be exposed to weather conditions—heat, cold, rain, and wind. We offer competitive wages and an excellent benefits package, including a 401 (k), 100% paid medical/dental/life insurance, and holidays/vacation/PSL.

Senior plc is an international, market-leading, engineering solutions provider with 19 operating businesses in 11 countries. Traded on the London Stock Exchange, Senior designs and manufactures high-technology components and systems for the worldwide aerospace, defense, land vehicle and power & energy markets. Senior Aerospace SSP, a division of Senior plc, is the world's largest aerospace high-pressure ducting system supplier. Starting as 'Stainless Steel Products' in 1945, and acquired by Senior plc in 1995, we are vertically integrated with our own foundry, fabrication shop, and ISO-certified engineering lab, allowing us to design, manufacture, and qualify complex ducting systems for space launch, defense, and commercial aerospace applications worldwide. We are committed to the highest standards of ethics, safety, quality, efficiency, and continuous improvement. At SSP, we believe in building strong relationships with our customers, suppliers, and most importantly, our employees. We foster a welcoming, respectful, and inclusive environment with ample opportunities for professional growth. Join us and find your future in a company that values innovation and integrity. Summary: Requires precision welding of company and customer products in compliance with rigid customer and engineering specifications and requirements using GTAW process. Characteristic of this classification is welding product parts and assemblies (normally in areas of easy access on flat or horizontal surfaces) in accordance with customer specifications and requirements, using gas, inert gas arc. At least one of the following alloy groups in accordance with AWS D17.1 and QOP-62-02, in Groups I, II, III, IV, and VI. Essential Duties and Responsibilities includes the following and all other duties as assigned: • Shall qualify to AWS D17.1 and QOP-62-02 which includes but is not limited to Groups I, II, III, IV, and VI. Weld shall pass visual, radiographic and metallographic examinations. Must understand all weld symbols and weld specifications, • Determines from nature of assignments, blueprints, welding manuals, and established procedures, the sequence of welding operations, tolerances and dimensional requirements and correct relationship of parts., • Performs difficult gas, inert gas arc or metallic arc welding of any types of metals and their alloys on all surfaces (flat, horizontal, vertical or circular) of product parts and assemblies in compliance with customer and engineering specifications and requirements where procedures are well established and incorrect weldments and parent metal failures can be readily detected and repaired., • Weld various types of metals and alloys used in the construction of product, parts, assemblies and equipment involving difficult type of welding such as:, • Thin materials (.010" or lighter to.100"), • Thin materials to castings., • Thick materials (.101" to .5"), • Close to edge (.050" or less) where edge may be readily burned off unless special care is taken., • Thick to thin combination., • Weld formed parts and assemblies where surface profile, finish and contour is critical., • Weld tanks, pressure vessels, piping, and similar items where soundness and penetration of the weld is a vital factor., • Weld parts and assemblies where application of heat to surfaces is a prime factor of distortion and warping which must be held to a minimum in order to maintain specified dimensions and tolerances after welding., • Layout locations of welds and make own setups as required by written instructions. Competencies: To perform the job successfully, an individual should demonstrate the following competencies: • Technical Skills - Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Completes tasks on time or notifies appropriate person with an alternate plan., • Innovation - Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience: Associate degree (A.A.) or equivalent from two-year College or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience. The Welder A requires one the following requirements: • Performs x-ray quality precision welding of company and customer products in compliance with rigid customer and engineering specifications and requirements using GTAW process. At least one (1) of the following certifications must be maintained in accordance with AWS D17.1 and QOP-62-02, in Groups I, II, III, IV or VI. OR • Performs precision welding of company and customer products with two (2) or more certifications in accordance with AWS D17.1 and QOP-62-02, in Groups I, II, III, IV, or VI and actively welds those materials. Departmental job requirements may require more than two (2) certifications. Manufacturing Standards: Operator must obtain and maintain: • SSP Welding Certificate, • "S" Stamp, • Maintain minimum output of 90%, • Maintain minimum product quality acceptance of 95% Target Hourly Rate = $19.16 - $45.18 - Grade 11 Monday - Friday 2nd Shift 3:30pm - 12:00am Joining our team will provide you with a rewarding career with a tight-knit and collaborative team. You will also enjoy a competitive compensation package that includes a market-led base salary, comprehensive benefits package along with wellness benefits, matching 401K plan and paid time off. Apply today for an opportunity to join our team! Trade Compliance Statement Access to our facilities is restricted under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions ), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data. To ensure there is no unexpected delay to your start date with our Company and due to the potential need to obtain an export license, we would like to promptly assess whether such a license is needed to access our facility and/or systems. Such licenses can take several weeks/months to obtain from the U.S. Government. Our Trade Compliance department may reach out to you with a Licensing Assessment form, which we request you kindly complete and return as soon as possible. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EOE M/F/D/V/VEVRAA Federal Contractor

The role involves working on complex ducting systems in a dynamic and supportive environment.This position offers a competitive compensation package, including benefits and a matching 401K plan.

Requirements: The Welder A requires one of the following requirements:.

Characteristic of this classification is welding product parts and assemblies (normally Welder, Welding, AWS, Manufacturing, Metal, Dance, Materials.

In addition to the above, Resistance Welder's are to maintain an organized, clean and safe work area using safety standards and expectations while adhering to all quality practices.

In addition to the above, Welders are to maintain an organized, clean and safe work area using safety standards and expectations while adhering to all quality practices.