Welder jobs in Newport News, VirginiaCreate job alerts

Job Description BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): Experience: Minimum of five years maintenance/commercial/naval experience Required Skills: 1. Multi-pass. All position fillet and butt welds using the SMAW (Shielded metal arc) process, 2. Ability to mirror weld using the SMAW and GTAW processes, 3. Experience working in physically demanding environments (ditches, trenches, ladders, staging, etc.). 4. Familiarity with OSHA regulations relative to the shipbuilding industry., 4. Heating - Oxygen/Propane Heating Torch, 5. Ability to properly use fillet gauges, butt gauges, and a six inch scale. Welding Qualifications: 1. All positions using the SMAW and GTAW processes 2. Thin wall sockets (Required for below 0.187 wall joints) The Welding School will administer tests for the following qualifications: 1. Welders Vision Test (5 Minutes), 2. Visual Inspection of Welds Level I (4 Hours), 3. Pre-heat and Interpass (1 hour), 4. Fire Watch CBT (2 hours), 5. Torch Safety test and practical (3 hours) REQUIRED EDUCATION: High school diploma/GED is required. School must be accredited. WORK HOURS: Full-Time ALL SHIFTS

Job Description Travel Welder/Fabricator Position Job Title: Structural Welder/Fitter $45 & $140 in per diem. This position is located in Newport News, Virginia paying $45 and $140 in per diem Job Description We are seeking an experienced Advanced Shipfitter with a minimum of four years of commercial or naval experience as a first-class Shipfitter The ideal candidate will have extensive skills in single pass tack welding, burning, heating, and the ability to read and comprehend complex structural assembly drawings, blueprints, and sketches. Responsibilities • Perform multi-pass tack welding using the Shielded Metal Arc Welding (SMAW) process., • Operate burning and heating equipment, specifically oxygen/propane burning torches., • Interpret complex structural assembly drawings, blueprints, and sketches, including weld symbols, material types, datum, and reference lines., • Comprehend fractional dimensions using a ruler and lay off piece parts for fabrication and assembly., • Assemble structural piece parts according to specifications with high-quality standards., • Work effectively in physically demanding environments such as shipbuilding or steel fabrication., • Ensure compliance with OSHA regulations relevant to the shipbuilding industry., • Single & Multi Pass Tack Welding, • Burning using Oxygen/Propane Burning Torch, • Heating using Oxygen/Propane Heating Torch, • Ability to read and interpret complex structural assembly drawings, blueprints, and sketches, • Ability to comprehend fractional dimensions using a ruler The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Newport News,VA. Application Deadline This position is anticipated to close on Oct 24, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: • Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions., • Heat oxygen/propane heating torch., • Perform grinding and pick up work as needed., • Complete air carbon arc gouging., • Properly use fillet and butt gauges., • Minimum 8 years of naval/commercial welding experience., • Successfully pass several tests over a three-week period., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass hair follicle test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description Marine Electrician/Maintenance Mechanic/Welder Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Marine Electrician/Maintenance Mechanic/Welder at our Hampton, Va location: Main is seeking a qualified marine electrician/maintenance mechanic/welder with knowledge and experience in 440 VAC powered equipment, HVAC/electronic component troubleshooting and repair. The candidate should also possess in-depth knowledge and experience in commercial power distribution theories and techniques. Applicant must have a dependable work record and a clean background check. DBIDS access to Naval facilities a plus. Must be mechanically inclined and adaptable to the shipyard and industrial environments. Travel may be necessary at times. Shipyard experience is highly preferred. Experience with and understanding of basic blasting and painting equipment (Dust Collectors, Ventilation Blowers, Industrial Size Vacuums, Heaters/AC Units, Blast Pots, Abrasive Recycling Equipment, Deck Blasting Equipment, and Electrical Distribution Panels) is a plus. Job Type: Full-time, hourly Required experience: Five years (5) verified experience as a marine electrician in 440 VAC powered equipment. • Forklift training/certification a plus (additional training will be required once hired for those using a forklift), • Able to make connections of equipment to the distribution panel, • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision, • Must be proficient in the use of basic electrical meters and test equipment (volt-ohm meter, clamp on ampmeter)., • Capable of installing both Russellstoll and Meltric Plug connections, • Basic understanding of Lock Out/Tag Out Procedures, • High Level of critical thinking and troubleshooting ability, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site, • All candidates must submit to drug testing and E-Verification of their right to work in the US, • Reliable transportation a must, • Adherence to Safety and Quality Standards are a must, • Must be physically able to board large vessels via stairs or ladder while carrying necessary tools No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week, work on the weekends or both. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. • Vacation Pay, • Health insurance, • Life insurance, • Dental and vision plan, • 401(k) savings plan Main Industries is an Equal Opportunity Employer (EOE) Job Posted by ApplicantPro

Job DescriptionStructural Welder (Pulse Arc) $45/hr and $140 in per diem Job Description We are seeking a highly skilled Structural Welder with expertise in Pulse Arc welding techniques to join our team. You will be responsible for assisting on the building of nuclear powered submarines and aircraft carriers. This role requires a minimum of four years of experience in naval shipyard environments, specializing in various welding processes including Pulse Arc Welding (GMAW-P), Stick Welding (SMAW), MIG Welding (GMAW), and Flux-Core Welding. Responsibilities • Perform multi-pass, all-position fillet and butt welds using SMAW, GMAW, FCAW, and GMAW-P processes., • Work efficiently in physically demanding environments such as shipboard, sub-assemblies, and staging areas., • Ensure compliance with OSHA regulations pertinent to the shipbuilding industry., • Utilize air carbon arc gouging techniques and properly use fillet and butt weld gauges., • 4+ years of experience with GMAW, FCAW, and GMAW-P welding processes., • Experience in physically demanding environments and working with shipboard sub-assemblies., • Knowledge of OSHA regulations for shipbuilding., • Skill in air carbon arc gouging. The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Newport News,VA. Application Deadline This position is anticipated to close on Oct 13, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! $34/hour- $660/ per week per diem Job Description: • Complete welding projects using flux core and stick processes., • Must be able to read blueprints and other engineering drawings., • Tack weld clips and brackets in to place prior to permanent welding., • Fabricate, align, and assemble structural parts such as plates, bulkheads, and frames., • Ability to comprehend blueprints, sketches, weld symbols, material types, and templates., • Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material. Requirements Job Requirements: • Minimum 5 years of shipyard welding experience., • Successfully pass welding tests to receive job offer., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass drug test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description Job Opportunity: Structural Welder – Pulse Arc Location: Newport News, VA Pay: $45.00/hr (Local) | $55.00/hr (Non-Local) Schedule: Full-Time, Contract | 40 hrs/week About the Role Perform pulse-arc structural welding (GMAW/FCAW) on ship modules. Key Responsibilities • Weld per WPS; multipass/all positions as needed., • Prep/fit joints; manage distortion/heat input., • Support QA/NDT and repairs. Requirements • Recent structural weld test; pulse processes preferred., • Read symbols/prints; strong safety/quality., • HS diploma/GED; background & drug screening. How to Apply Undrae: 757-260-9842 | Ashlie: 423-825-8091 | Jeremy: 206-960-2017 • • Equal Opportunity Statement LEAD is an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion is critical to our success as a growing national company, and we seek

Job Description Chipton-Ross is seeking multiple Structural Welder (Pulse Arc) for a contract opportunity in Newport News, VA. BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): Four years of NNS or naval shipyard experience as a first class Welder. Required Skills: 1.Multi-pass. All position fillet and butt welds using the following processes: SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding), FCAW (Flux Cored Arc Welding) and GMAW-P (Pulse Arc Welding). 2. Heating - Oxygen/Propane Heating Torch. 3. Experience working in a physically demanding environment (shipboard, sub-assemblies, ladders, staging, etc.). 4. Familiarity with OSHA regulations relative to the shipbuilding industry. 5. Air Carbon Arc Gouging. 6. Ability to properly use fillet and butt weld gauges. Welding Qualification: All Welders will be required to pass all position, Multi-pass Butt Weld, Welder Qualification Tests prior to reporting for the first day of productive work. These tests will be in accordance with MIL-STD-248D Paragraph 5.3.3 and the following: A. All position (Horizontal (2G), Vertical (3G), and Overhead (4G)) SMAW (Shielded Metal Arc Welding) process. B. All position (Horizontal (2G), Vertical (3G), and Overhead (4G)) FCAW (Flux Core Arc Welding) process. C. Horizontal (2G) position GMAW (Gas Metal Arc Welding) process. D. All position (Horizontal (2G), Vertical (3G), and Overhead (4G)) GMAW-P (Pulse Arc Welding) process. E. Air Carbon Arc Gouging proficiency test. The Welding School will administer the following tests: 1. All Welding Qualification Tests in "A" (6 hours), "B" (12 hours), "C" (4 hours) above. 2. Visual Inspection of Welds Level I (4 hours). 3. Welders Vision Test (5 minutes). 4. Air Carbon Arc Gouging Proficiency Test (1 hour). Prior to performing work at Newport News all Welders must successfully pass, without training, the above tests at the Newport News welding school. * PPE training means general requirements, eye and face protection, head protection, foot protection, hand and body protection, hearing protection and body harness-personal fall arrest systems (PFAS) and position device systems. Special Requirements: REQUIRED EDUCATION: High school diploma/GED is required. School must be accredited. WORK HOURS: Full-Time ALL SHIFTS Employment will be contingent on clearing a drug screen and background check. Both must clear prior to start date.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent Job Overview:Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education: High school graduate, or GED Responsibilities: • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location Newport News, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: • Read blueprints and other customer specifications/drawings., • Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG)., • Minimum 8 years of naval/commercial welding experience., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass hair follicle test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job DescriptionMust have pipe welding experience. Pass all welding test. Pass background check, able to work in all shipyards and government facilities.

Job Description Job Opportunity: Pipe Welder Location: Newport News, VA Pay: $50.00/hr (Local) | $50.00/hr and $120 Per Day Worked for Per Diem (Non-Local) Schedule: Full-Time, Contract | 40 hrs/week About the Role Weld pipe (GTAW/SMAW; FCAW as required) on carbon/stainless to procedure. Key Responsibilities • Read WPS; maintain purge and interpass temps., • Execute sound root/hot/cap passes; support NDT (VT/RT/PT)., • Perform repairs per QA direction. Requirements • Recent pipe weld test success (6G preferred)., • Knowledge of consumables, joint prep, and cleanliness., • HS diploma/GED; background & drug screening. How to Apply Undrae: 757-260-9842 | Ashlie: 423-825-8091 | Jeremy: 206-960-2017 • • Equal Opportunity Statement LEAD is an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Auto Body Technician Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision? • Paid Weekly, • Continuous Training, • Supportive Team Culture, • Company match 401K, • Medical/Dental/Vision, • Paid Time Off - 6 Paid Holidays, • Rewarding Work Responsibilities • Complete disassembly of vehicle to assist Collision Estimators in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Plan work procedure: follow work order for all operations listed, • Remove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage, • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept., • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards, • Perform other related duties as assigned, • Comply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications • Must be at least 18 years of age, • I-CAR / ASE certifications preferred, • 2-3 years’ collision repair experience preferred, • Valid Driver's License Required, • Customer-focused attitude with the ability to work well in a team environment, • Ability to read and comprehend written instructions and information, • Successful completion of background check required Behaviors/Competencies: • Integrity-Respect and accountability at every level and every interaction, • Customer Service-Provide the highest level of customer service while building customer satisfaction and retention, • Innovation-Develops and displays innovative approaches and ideas to our business, • Teamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, please e-mail or call (470)500-6808. This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

About the Company: Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs About the Role: The Pipe Welder will utilize a variety of welding filler metals and processes to perform pipe welds throughout all phases of ship construction. Responsibilities: • Perform tack, fillet, and full penetration welding on steel foundations and structural and pipe joints in production on aircraft carriers and submarines., • Ensure compliance with safety regulations and standards. Qualifications: • Minimum of five years commercial/naval experience. Required Skills: • Multipass. All position fillet and butt welds using the SMAW Shielded metal arc process., • Ability to fuse inserts and weld carbon steel, stainless steel, and copper nickel pipe using the SMAW and GTAW Gas Tungsten Arc Welding processes., • Ability to mirror weld using the SMAW and GTAW processes., • Heating Oxygen/Propane Heating Torch., • Experience working in physically demanding environments (shipboard, subassemblies, ladders, staging, etc.)., • Familiarity with OSHA regulations relative to the shipbuilding industry., • Ability to properly use fillet gauges, butt gauges, and a six-inch scale. Preferred Skills: • All positions using the SMAW and GTAW processes., • Thin wall sockets required for below 0.187 wall joints.

The Pipe Welder will utilize a variety of welding filler metals and processes to perform pipe welds throughout all phases of ship construction.

Chipton-Ross is seeking multiple Pipe Welders for a contract opportunity in Newport News, VA. Welders Vision Test (5 Minutes) 2. Prior to performing work all welders must successfully pass the above tests and have a completed FORM 1429 and a statement of current maintenance on file with O37 Welding

The Pipe Welder will utilize a variety of welding filler metals and processes to perform pipe welds throughout all phases of ship construction.

Welders Vision Test (5 Minutes). Prior to performing work all welders must successfully pass the above tests and have a completed FORM 1429 and a statement of current maintenance on file with O37 Welding Engineering. Chipton-Ross is seeking multiple Maintenance Pipe Welders for a contract opportunit

Marine Electrician/Maintenance Mechanic/Welder Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Marine Electrician/Maintenance Mechanic/Welder at our Hampton, Va location: Main is seeking a qualified marine electrician/maintenance mechanic/welder with knowledge and experience in 440 VAC powered equipment, HVAC/electronic component troubleshooting and repair. The candidate should also possess in-depth knowledge and experience in commercial power distribution theories and techniques. Applicant must have a dependable work record and a clean background check. DBIDS access to Naval facilities a plus. Must be mechanically inclined and adaptable to the shipyard and industrial environments. Travel may be necessary at times. Shipyard experience is highly preferred. Experience with and understanding of basic blasting and painting equipment (Dust Collectors, Ventilation Blowers, Industrial Size Vacuums, Heaters/AC Units, Blast Pots, Abrasive Recycling Equipment, Deck Blasting Equipment, and Electrical Distribution Panels) is a plus. Job Type: Full-time, hourly Required experience: Five years (5) verified experience as a marine electrician in 440 VAC powered equipment. \n • Forklift training/certification a plus (additional training will be required once hired for those using a forklift)\n, • Able to make connections of equipment to the distribution panel\n, • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision\n, • Must be proficient in the use of basic electrical meters and test equipment (volt-ohm meter, clamp on ampmeter). \n, • Capable of installing both Russellstoll and Meltric Plug connections\n, • Basic understanding of Lock Out/Tag Out Procedures\n, • High Level of critical thinking and troubleshooting ability\n, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site\n, • All candidates must submit to drug testing and E-Verification of their right to work in the US\n, • Reliable transportation a must\n, • Adherence to Safety and Quality Standards are a must\n, • Must be physically able to board large vessels via stairs or ladder while carrying necessary tools\n\n No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week, work on the weekends or both. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. \n • Vacation Pay\n, • Health insurance\n, • Life insurance\n, • Dental and vision plan\n, • 401(k) savings plan\n\n Main Industries is an Equal Opportunity Employer (EOE)

Marine Electrician/Maintenance Mechanic/Welder Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Marine Electrician/Maintenance Mechanic/Welder at our Hampton, Va location: Main is seeking a qualified marine electrician/maintenance mechanic/welder with knowledge and experience in 440 VAC powered equipment, HVAC/electronic component troubleshooting and repair. The candidate should also possess in-depth knowledge and experience in commercial power distribution theories and techniques. Applicant must have a dependable work record and a clean background check. DBIDS access to Naval facilities a plus. Must be mechanically inclined and adaptable to the shipyard and industrial environments. Travel may be necessary at times. Shipyard experience is highly preferred. Experience with and understanding of basic blasting and painting equipment (Dust Collectors, Ventilation Blowers, Industrial Size Vacuums, Heaters/AC Units, Blast Pots, Abrasive Recycling Equipment, Deck Blasting Equipment, and Electrical Distribution Panels) is a plus. Job Type: Full-time, hourly Required experience: Five years (5) verified experience as a marine electrician in 440 VAC powered equipment. \n • Forklift training/certification a plus (additional training will be required once hired for those using a forklift)\n, • Able to make connections of equipment to the distribution panel\n, • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision\n, • Must be proficient in the use of basic electrical meters and test equipment (volt-ohm meter, clamp on ampmeter). \n, • Capable of installing both Russellstoll and Meltric Plug connections\n, • Basic understanding of Lock Out/Tag Out Procedures\n, • High Level of critical thinking and troubleshooting ability\n, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site\n, • All candidates must submit to drug testing and E-Verification of their right to work in the US\n, • Reliable transportation a must\n, • Adherence to Safety and Quality Standards are a must\n, • Must be physically able to board large vessels via stairs or ladder while carrying necessary tools\n\n No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week, work on the weekends or both. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. \n • Vacation Pay\n, • Health insurance\n, • Life insurance\n, • Dental and vision plan\n, • 401(k) savings plan\n\n Main Industries is an Equal Opportunity Employer (EOE)

$2500 SIGN ON BONUS FREE ATDM 16-WEEK WELDER TRAINING PROG IN DANVILLE, VA ( PROGRAM IS UNPAID) Location: Newport News, Virginia, United States Date: Sep 4, 2025 Req ID: 41763 Team: X18 WELDERS Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Full-Time Shift: Multiple Relocation: No relocation assistance available Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role Newport News Shipbuilding, a division of Huntington Ingalls Industries, has partnered with the Department of Defense (DOD) to offer a FREE 16-week training opportunity at Danville Community College in Danville, VA. This is an UNPAID opportunity, however the training and lodging/housing in Danville, VA will be provided and paid for by a grant from the Department of Defense. All housing and utilities for this training is covered by the program, and all participants will be housed in downtown Danville's River district. Participants will be responsible for all other living expenses including meals, etc. Participants that successfully complete the 16-week/600 hour training program will be eligible to start work with the Welding department at Newport News Shipbuilding in Newport News, VA as a Welder earning $28+ per hour and will receive a $2500 sign-on bonus. All participants will be required to apply and successfully complete the Newport News Shipbuilding hiring process. The 16-week/600 hour training program will cover Weld Safety as well as OSHA 10 training. Throughout the course you will learn and build your skills in MIG, TIG, and Flux-Core welding. As a welder, you will first be qualified through the shipyards state of the art welding school. After completion of welding school, you will use a wide range of welding filler metals and welding processes to perform structural and/or pipe welds in all phases of ship construction. Welders perform tack, fillet, and full penetration welding on steel foundations and structural and pipe joints in production on aircraft carriers and submarines. This will be done using various welding processes including SMAW (Shielded Metal Arc Welding), FCAW (Flux Cored Arc Welding), GMAW (Gas Metal Arc Welding), and GTAW (Gas Tungsten Arc Welding). These welds are made in all positions using both manual and mechanized processes and will satisfy all nondestructive tests requirements (visual inspection, magnetic particle inspection, ultrasonic inspection, radiographic inspection). Welders will also receive additional training including certified visual inspection, fire watch, and carbon arcing, and troubleshooting minor welding equipment problems. Click on this link to see a ATDM Video Must Have Candidates have a HS Diploma or GED Must able to work at extreme heights or small confined spaces. Must be able to kneel, squat, crawl, bend, stoop, and climb. Must be able to lift 40 lbs and must take and pass a respirator fit test. Must be able to work assigned shift as production needs. Must be able to pass Physical Agility Test. Must be able to work any shift Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call 1-844-849-8463 for assistance. Press #2 for Newport News Shipbuilding.

Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: • Once assigned, reports directly to the project Supervisor in the performance of his/her responsibilities., • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating an machinery., • Ensures that all Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded., • Reads and understands PPE Policy., • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation., • Lays out material prior to performing welding operations to prevent possible errors., • Maintains good housekeeping practices, turning off machines when not in use, disposing of waste properly sweeping the area, etc., • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant., • Ensures that all requirements of the Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management., • Follows detailed repair procedures and instructions (e.g.; SOW, Specs, RCC, etc.) required completing the production operations., • Notifies Supervisor of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.)., • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process., • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW Std. Items., • Ensures control and assumes responsibility for Level I material controls., • Expertly performs all tasks required as a Welder. Provides mentoring to junior craftsman., • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures., • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop., • 5 years' experience as a welder., • Qualifies as a Welder/Workmanship Inspector in accordance with welding procedures., • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade., • Must be qualified in a minimum of 5 welding/brazing processes to include SMAW, GTAW, FCAW., • Ability to obtain and maintain access to US Navy ships and government facilities., • Ability to communicate effectively, work independently or in a group., • Ability to do basic math, i.e. add, subtract, divide and multiply., • 25' Tape, • Center Punch, • 3 lb beater, • Chalk Box, • Pencil, • Combination Square, • Burning goggles, • Striker, • Full Face Welding Shield, • Welding Gloves, • Slag Hammer, • Bottle Wrench, • 12" Crescent Wrench, • Wire Cutters, • Pliers TO APPLY FOR THIS POSITION, GO HERE:

Flux Core Welder at Riggins Co in Hampton, VA Are you tired of feeling like just another badge number at work? Do you ever feel like no matter how hard you hustle, it's never enough? At Riggins Company, we believe that you don't have to be miserable at your job. There is a better way, and it's here with us! We genuinely care about our team members, and it shows in everything we do. \n • \nIt's a fun place to work: We foster a supportive and enjoyable work environment where you can truly take pride in what you do. \n Description: Riggins Company, located in Hampton, VA, is known for its exceptional work in custom steel fabrication. We are currently seeking skilled Flux Core Welders. As part of our team, you will have the opportunity to showcase your expertise in crafting large structural fixtures for the US Navy and various industries in a work environment that is team-oriented, supportive, and focused on quality. Why Choose Riggins Company: \n • Competitive pay rates\n, • Comprehensive benefits package, including healthcare and retirement plans\n, • Enjoy monthly bonuses, vacation time, and personal leave.\n, • Consistent overtime is available, but not required.\n, • Closed Sundays\n, • Conveniently located in Hampton, VA, minutes off 664\n, • Must pass a FLUX CORE weld test.\n, • Must pass 3G and 4G open root plate tests (x-ray and bend test).\n, • Minimum of 5 years of welding experience in the fabrication industry.\n, • Read and comprehend blueprints, sketches, and templates.\n, • Efficient with cutting torches, burning, and plasma torches.\n, • Clean and prepare surfaces to be welded.\n, • Competitive skill based pay\n, • Insurance offered: Health, Dental, Vision, Life and Disability.\n, • 401(k) with company matching.\n, • Vacation, Personal Leave, and Holiday Pay.\n NOTE: The pay rate is determined by skill level and experience; weld tests are given as part of the interview process. To learn more about Riggins, visit us online at and follow us on social media at @rigginsco. You can find us on Instagram, Facebook, LinkedIn, and Google.

WELDER/STRUCTURE EXPERIENCED Location: Newport News, Virginia, United States Date: Sep 9, 2025 Req ID: 42724 Team: X18 WELDERS Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Full-Time Shift: Multiple Relocation: No relocation assistance available Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role Newport News Shipbuilding, a division of Huntington Ingalls Industries, is seeking qualified welders, with 1+ years of hands on WELDING work experience. Newport News Shipbuilding offers competitive pay, weekly paychecks, paid time off, paid holidays, medical benefits including an on-site health center, 401K company match, employee discounts, and more. As a Welder, you will first be qualified through the shipyards state of the art Welding School. After completion of Welding School, you will use a wide range of welding filler metals and welding processes to perform structural and/or pipe welds in all phases of ship construction. Welders perform tack, fillet, and full penetration welding on steel foundations and structural and pipe joints in production on aircraft carriers and submarines. This will be done using various welding processes including SMAW (Shielded Metal Arc Welding), FCAW (Flux Cored Arc Welding), GMAW (Gas Metal Arc Welding), and GTAW (Gas Tungsten Arc Welding). These welds are made in all positions using both manual and mechanized processes and will satisfy all nondestructive tests requirements (visual inspection, magnetic particle inspection, ultrasonic inspection, radiographic inspection). Welders will also receive additional training including certified visual inspection, fire watch, carbon arcing, and troubleshooting minor welding equipment problems. Watch this Welder video to learn more: Must Have Candidates must have at least one year of experience, or the completion of an AWS accredited school. Must be able to work assigned shift as production needs. Must be able to work at extreme heights or small confined spaces. Must be able to kneel, squat, crawl, bend, stoop, and climb. Must be able to lift 40 lbs and must take and pass a respirator fit test. Must be able to work indoors/outdoors year round in all weather conditions. Must be able to pass Physical Agility Test. Must be able to perform overhead work. Must be able to work overtime as needed. Must be willing to undergo a background investigation and drug screen. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call 1-844-849-8463 for assistance. Press #2 for Newport News Shipbuilding.

WELDER/STRUCTURAL TRAINEE - COMPLETE 3 WEEKS OF FREE TRADES TRAINING Location: Newport News, Virginia, United States Date: Sep 22, 2025 Req ID: 43001 Team: X18 WELDERS Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Full-Time Shift: Multiple Relocation: No relocation assistance available Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role This position is for job seekers with no trades experience willing to complete three weeks of unpaid training in the Welder trade . Newport News Shipbuilding has partnered with the Virginia Ship Repair Association, local Virginia community colleges and maritime training facilities, to offer Marine Trades Training (MTT) programs for individuals interested in learning a trade and working full-time for NNS. The Welding trainee program is offered once a month with 8-10 students per class, and is held at Virginia Peninsula Community College (Hampton, VA), Tidewater Community College (Portsmouth, VA), or Camp Community College (Suffolk, VA). Each (UNPAID) program is 3-weeks (120 hours), 7:00am - 3:30pm (Monday thru Friday). To learn more about the Marine Trades Training (MTT) programs and how the process works, please visit: As a welder, you will begin your career by qualifying though the shipyard's start-of-the-art welding school. Upon completion, you will use a variety of welding filler metals and processes to perform structural and pipe welds throughout all phases of ship construction. Welders are responsible for tack, fillet, and full penetration welding on steel foundations, as well as structural and pipe joints for aircraft carriers and submarines. Welders will employ various welding processes including SMAW (Shielded Metal Arc Welding), FCAW (Flux Cored Arc Welding), GMAW (Gas Metal Arc Welding), and GTAW (Gas Tungsten Arc Welding), and perform welding in all positions using both manual and mechanized techniques. All work will meet stringent nondestructive testing requirements, including visual inspection, ultrasonic inspection, and radiographic inspection. Additionally, welders will receive further training in certified visual inspection, fire watch protocols, carbon arcing, and troubleshooting minor welding equipment issues. Working at Newport News Shipbuilding often involves performing tasks in various weather conditions, at extreme heights on scaffolding, ladders, or elevated platforms and in small, confined spaces such as tanks, compartments, or voids in a ship. These environments require a strong focus on safety, precision, and adaptability, as well as physical agility and comfort working in challenging conditions. Watch this video to learn more: Must Have Must be able to pass a 3-week (UNPAID) program (120 hours), 7:00am - 3:30pm (Monday - Friday) Must be willing to undergo a background investigation and drug screen Must be able to pass physical agility test Must be able to kneel, squat, crawl, bend, stoop, and climb on a daily basis Must be able to lift at least 40 pounds Must be able to perform overhead work Must be able to work overtime as needed Must be able to be clean shaven to wear a respirator Must be able to perform work outdoors, year- round, in all weather conditions Must be able to work at extreme heights Must be able to work in small, tight, confined spaces Must be willing to work any shift Nice to Have High school graduate or equivalent preferred. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call 1-844-849-8463 for assistance. Press #2 for Newport News Shipbuilding.

Marine Electrician/Maintenance Mechanic/Welder Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Marine Electrician/Maintenance Mechanic/Welder at our Hampton, Va location: Main is seeking a qualified marine electrician/maintenance mechanic/welder with knowledge and experience in 440 VAC powered equipment, HVAC/electronic component troubleshooting and repair. The candidate should also possess in-depth knowledge and experience in commercial power distribution theories and techniques. Applicant must have a dependable work record and a clean background check. DBIDS access to Naval facilities a plus. Must be mechanically inclined and adaptable to the shipyard and industrial environments. Travel may be necessary at times. Shipyard experience is highly preferred. Experience with and understanding of basic blasting and painting equipment (Dust Collectors, Ventilation Blowers, Industrial Size Vacuums, Heaters/AC Units, Blast Pots, Abrasive Recycling Equipment, Deck Blasting Equipment, and Electrical Distribution Panels) is a plus. Job Type: Full-time, hourly Required experience: Five years (5) verified experience as a marine electrician in 440 VAC powered equipment. \n • Forklift training/certification a plus (additional training will be required once hired for those using a forklift)\n, • Able to make connections of equipment to the distribution panel\n, • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision\n, • Must be proficient in the use of basic electrical meters and test equipment (volt-ohm meter, clamp on ampmeter). \n, • Capable of installing both Russellstoll and Meltric Plug connections\n, • Basic understanding of Lock Out/Tag Out Procedures\n, • High Level of critical thinking and troubleshooting ability\n, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site\n, • All candidates must submit to drug testing and E-Verification of their right to work in the US\n, • Reliable transportation a must\n, • Adherence to Safety and Quality Standards are a must\n, • Must be physically able to board large vessels via stairs or ladder while carrying necessary tools\n\n No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week, work on the weekends or both. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. \n • Vacation Pay\n, • Health insurance\n, • Life insurance\n, • Dental and vision plan\n, • 401(k) savings plan\n\n Main Industries is an Equal Opportunity Employer (EOE)

Locations: Huntington Ingalls Industries (HII) - Newport News, VA Norfolk Naval Shipyard (NNSY) - Portsmouth, VA South Carolina Mills Marine is looking for a full time Welder. Mills Marine has an extensive benefits package and 401k

Marine Electrician/Maintenance Mechanic/Welder Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Marine Electrician/Maintenance Mechanic/Welder at our Hampton, Va location: Main is seeking a qualified marine electrician/maintenance mechanic/welder with knowledge and experience in 440 VAC powered equipment, HVAC/electronic component troubleshooting and repair. The candidate should also possess in-depth knowledge and experience in commercial power distribution theories and techniques. Applicant must have a dependable work record and a clean background check. DBIDS access to Naval facilities a plus. Must be mechanically inclined and adaptable to the shipyard and industrial environments. Travel may be necessary at times. Shipyard experience is highly preferred. Experience with and understanding of basic blasting and painting equipment (Dust Collectors, Ventilation Blowers, Industrial Size Vacuums, Heaters/AC Units, Blast Pots, Abrasive Recycling Equipment, Deck Blasting Equipment, and Electrical Distribution Panels) is a plus. Job Type: Full-time, hourly Required experience: Five years (5) verified experience as a marine electrician in 440 VAC powered equipment. \n • Forklift training/certification a plus (additional training will be required once hired for those using a forklift)\n, • Able to make connections of equipment to the distribution panel\n, • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision\n, • Must be proficient in the use of basic electrical meters and test equipment (volt-ohm meter, clamp on ampmeter). \n, • Capable of installing both Russellstoll and Meltric Plug connections\n, • Basic understanding of Lock Out/Tag Out Procedures\n, • High Level of critical thinking and troubleshooting ability\n, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site\n, • All candidates must submit to drug testing and E-Verification of their right to work in the US\n, • Reliable transportation a must\n, • Adherence to Safety and Quality Standards are a must\n, • Must be physically able to board large vessels via stairs or ladder while carrying necessary tools\n\n No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week, work on the weekends or both. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. \n • Vacation Pay\n, • Health insurance\n, • Life insurance\n, • Dental and vision plan\n, • 401(k) savings plan\n\n Main Industries is an Equal Opportunity Employer (EOE)

Marine Electrician/Maintenance Mechanic/Welder Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Marine Electrician/Maintenance Mechanic/Welder at our Hampton, Va location: Main is seeking a qualified marine electrician/maintenance mechanic/welder with knowledge and experience in 440 VAC powered equipment, HVAC/electronic component troubleshooting and repair. The candidate should also possess in-depth knowledge and experience in commercial power distribution theories and techniques. Applicant must have a dependable work record and a clean background check. DBIDS access to Naval facilities a plus. Must be mechanically inclined and adaptable to the shipyard and industrial environments. Travel may be necessary at times. Shipyard experience is highly preferred. Experience with and understanding of basic blasting and painting equipment (Dust Collectors, Ventilation Blowers, Industrial Size Vacuums, Heaters/AC Units, Blast Pots, Abrasive Recycling Equipment, Deck Blasting Equipment, and Electrical Distribution Panels) is a plus. Job Type: Full-time, hourly Required experience: Five years (5) verified experience as a marine electrician in 440 VAC powered equipment. \n • Forklift training/certification a plus (additional training will be required once hired for those using a forklift)\n, • Able to make connections of equipment to the distribution panel\n, • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision\n, • Must be proficient in the use of basic electrical meters and test equipment (volt-ohm meter, clamp on ampmeter). \n, • Capable of installing both Russellstoll and Meltric Plug connections\n, • Basic understanding of Lock Out/Tag Out Procedures\n, • High Level of critical thinking and troubleshooting ability\n, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site\n, • All candidates must submit to drug testing and E-Verification of their right to work in the US\n, • Reliable transportation a must\n, • Adherence to Safety and Quality Standards are a must\n, • Must be physically able to board large vessels via stairs or ladder while carrying necessary tools\n\n No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week, work on the weekends or both. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. \n • Vacation Pay\n, • Health insurance\n, • Life insurance\n, • Dental and vision plan\n, • 401(k) savings plan\n\n Main Industries is an Equal Opportunity Employer (EOE)

Marine Electrician/Maintenance Mechanic/Welder Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Marine Electrician/Maintenance Mechanic/Welder at our Hampton, Va location: Main is seeking a qualified marine electrician/maintenance mechanic/welder with knowledge and experience in 440 VAC powered equipment, HVAC/electronic component troubleshooting and repair. The candidate should also possess in-depth knowledge and experience in commercial power distribution theories and techniques. Applicant must have a dependable work record and a clean background check. DBIDS access to Naval facilities a plus. Must be mechanically inclined and adaptable to the shipyard and industrial environments. Travel may be necessary at times. Shipyard experience is highly preferred. Experience with and understanding of basic blasting and painting equipment (Dust Collectors, Ventilation Blowers, Industrial Size Vacuums, Heaters/AC Units, Blast Pots, Abrasive Recycling Equipment, Deck Blasting Equipment, and Electrical Distribution Panels) is a plus. Job Type: Full-time, hourly Required experience: Five years (5) verified experience as a marine electrician in 440 VAC powered equipment. \n • Forklift training/certification a plus (additional training will be required once hired for those using a forklift)\n, • Able to make connections of equipment to the distribution panel\n, • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision\n, • Must be proficient in the use of basic electrical meters and test equipment (volt-ohm meter, clamp on ampmeter). \n, • Capable of installing both Russellstoll and Meltric Plug connections\n, • Basic understanding of Lock Out/Tag Out Procedures\n, • High Level of critical thinking and troubleshooting ability\n, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site\n, • All candidates must submit to drug testing and E-Verification of their right to work in the US\n, • Reliable transportation a must\n, • Adherence to Safety and Quality Standards are a must\n, • Must be physically able to board large vessels via stairs or ladder while carrying necessary tools\n\n No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week, work on the weekends or both. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. \n • Vacation Pay\n, • Health insurance\n, • Life insurance\n, • Dental and vision plan\n, • 401(k) savings plan\n\n Main Industries is an Equal Opportunity Employer (EOE)

Locations: Huntington Ingalls Industries (HII) - Newport News, VA Norfolk Naval Shipyard (NNSY) - Portsmouth, VA South Carolina Mills Marine is looking for a full time Welder. Mills Marine has an extensive benefits package and 401k

WELDER/STRUCTURE (CERTIFICATION REQUIRED) Location: Newport News, Virginia, United States Date: Sep 22, 2025 Req ID: 42908 Team: X18 WELDERS Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Full-Time Shift: Multiple Relocation: No relocation assistance available Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role As a welder, you will first be qualified through the shipyards state of the art welding school. After completion of welding school, you will use a wide range of welding filler metals and welding processes to perform structural and/or pipe welds in all phases of ship construction. Welders perform tack, fillet, and full penetration welding on steel foundations and structural and pipe joints in production on aircraft carriers and submarines. This will be done using various welding processes including SMAW (Shielded Metal Arc Welding), FCAW (Flux Cored Arc Welding), GMAW (Gas Metal Arc Welding), and GTAW (Gas Tungsten Arc Welding). These welds are made in all positions using both manual and mechanized processes and will satisfy all nondestructive tests requirements (visual inspection, magnetic particle inspection, ultrasonic inspection, radiographic inspection). Welders will also receive additional training including certified visual inspection, fire watch, carbon arcing, and troubleshooting minor welding equipment problems. This position is for job seekers who have received and can provide a certificate or diploma in Welding or a directly related field. Directly related fields include AWS Welding (SMAW, GTAW, GMAW, and/or FCAW). Candidates with no experience or certifications are encouraged to apply to the Welder Trainee requisition. Watch this video to learn more: Must Have One or more certificates of completion or diploma in Welding or a directly related field from a high school vocational program, community college, trade school, technical college, apprentice program, post-secondary institution, or military equivalent. Must be willing to undergo a background investigation and drug screen Must be able to pass physical agility test Must be able to kneel, squat, crawl, bend, stoop, and climb on a daily basis Must be able to lift at least 40 pounds Must be able to perform overhead work Must be able to work overtime as needed Must be able to be clean shaven to wear a respirator Must be able to perform work outdoors, year- round, in all weather conditions Must be able to work at extreme heights Must be able to work in small, tight, confined spaces Must be willing to work any shift Nice to Have High school graduate or equivalent preferred Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call 1-844-849-8463 for assistance. Press #2 for Newport News Shipbuilding.

Summary: \n Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. \n Responsibilities: \n\n • Once assigned, reports directly to the project Supervisor in the performance of his/her responsibilities.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating an machinery.\n, • Ensures that all Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and understands PPE Policy.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing welding operations to prevent possible errors.\n, • Maintains good housekeeping practices, turning off machines when not in use, disposing of waste properly sweeping the area, etc.\n, • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant.\n, • Ensures that all requirements of the Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; SOW, Specs, RCC, etc.) required completing the production operations.\n, • Notifies Supervisor of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW Std. Items.\n, • Ensures control and assumes responsibility for Level I material controls.\n, • Expertly performs all tasks required as a Welder. Provides mentoring to junior craftsman.\n, • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.\n, • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.\n, • 5 years' experience as a welder.\n, • Qualifies as a Welder/Workmanship Inspector in accordance with welding procedures.\n, • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.\n, • Must be qualified in a minimum of 5 welding/brazing processes to include SMAW, GTAW, FCAW.\n, • Ability to obtain and maintain access to US Navy ships and government facilities.\n, • Ability to communicate effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • 25' Tape\n, • Center Punch\n, • 3 lb beater\n, • Chalk Box\n, • Pencil\n, • Combination Square\n, • Burning goggles\n, • Striker\n, • Full Face Welding Shield\n, • Welding Gloves\n, • Slag Hammer\n, • Bottle Wrench\n, • 12" Crescent Wrench\n, • Wire Cutters\n, • Pliers\n

Locations: Huntington Ingalls Industries (HII) - Newport News, VA Norfolk Naval Shipyard (NNSY) - Portsmouth, VA South Carolina Mills Marine is looking for a full time Welder. Mills Marine has an extensive benefits package and 401k

Marine Electrician/Maintenance Mechanic/Welder Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Marine Electrician/Maintenance Mechanic/Welder at our Hampton, Va location: Main is seeking a qualified marine electrician/maintenance mechanic/welder with knowledge and experience in 440 VAC powered equipment, HVAC/electronic component troubleshooting and repair. The candidate should also possess in-depth knowledge and experience in commercial power distribution theories and techniques. Applicant must have a dependable work record and a clean background check. DBIDS access to Naval facilities a plus. Must be mechanically inclined and adaptable to the shipyard and industrial environments. Travel may be necessary at times. Shipyard experience is highly preferred. Experience with and understanding of basic blasting and painting equipment (Dust Collectors, Ventilation Blowers, Industrial Size Vacuums, Heaters/AC Units, Blast Pots, Abrasive Recycling Equipment, Deck Blasting Equipment, and Electrical Distribution Panels) is a plus. Job Type: Full-time, hourly Required experience: Five years (5) verified experience as a marine electrician in 440 VAC powered equipment. \n • Forklift training/certification a plus (additional training will be required once hired for those using a forklift)\n, • Able to make connections of equipment to the distribution panel\n, • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision\n, • Must be proficient in the use of basic electrical meters and test equipment (volt-ohm meter, clamp on ampmeter). \n, • Capable of installing both Russellstoll and Meltric Plug connections\n, • Basic understanding of Lock Out/Tag Out Procedures\n, • High Level of critical thinking and troubleshooting ability\n, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site\n, • All candidates must submit to drug testing and E-Verification of their right to work in the US\n, • Reliable transportation a must\n, • Adherence to Safety and Quality Standards are a must\n, • Must be physically able to board large vessels via stairs or ladder while carrying necessary tools\n\n No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week, work on the weekends or both. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. \n • Vacation Pay\n, • Health insurance\n, • Life insurance\n, • Dental and vision plan\n, • 401(k) savings plan\n\n Main Industries is an Equal Opportunity Employer (EOE)

Marine Electrician/Maintenance Mechanic/Welder Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Marine Electrician/Maintenance Mechanic/Welder at our Hampton, Va location: Main is seeking a qualified marine electrician/maintenance mechanic/welder with knowledge and experience in 440 VAC powered equipment, HVAC/electronic component troubleshooting and repair. The candidate should also possess in-depth knowledge and experience in commercial power distribution theories and techniques. Applicant must have a dependable work record and a clean background check. DBIDS access to Naval facilities a plus. Must be mechanically inclined and adaptable to the shipyard and industrial environments. Travel may be necessary at times. Shipyard experience is highly preferred. Experience with and understanding of basic blasting and painting equipment (Dust Collectors, Ventilation Blowers, Industrial Size Vacuums, Heaters/AC Units, Blast Pots, Abrasive Recycling Equipment, Deck Blasting Equipment, and Electrical Distribution Panels) is a plus. Job Type: Full-time, hourly Required experience: Five years (5) verified experience as a marine electrician in 440 VAC powered equipment. \n • Forklift training/certification a plus (additional training will be required once hired for those using a forklift)\n, • Able to make connections of equipment to the distribution panel\n, • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision\n, • Must be proficient in the use of basic electrical meters and test equipment (volt-ohm meter, clamp on ampmeter). \n, • Capable of installing both Russellstoll and Meltric Plug connections\n, • Basic understanding of Lock Out/Tag Out Procedures\n, • High Level of critical thinking and troubleshooting ability\n, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site\n, • All candidates must submit to drug testing and E-Verification of their right to work in the US\n, • Reliable transportation a must\n, • Adherence to Safety and Quality Standards are a must\n, • Must be physically able to board large vessels via stairs or ladder while carrying necessary tools\n\n No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week, work on the weekends or both. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. \n • Vacation Pay\n, • Health insurance\n, • Life insurance\n, • Dental and vision plan\n, • 401(k) savings plan\n\n Main Industries is an Equal Opportunity Employer (EOE)

WELDER/PIPE - EXPERIENCED Location: Newport News, Virginia, United States Date: Sep 18, 2025 Req ID: 42225 Team: X18 WELDERS Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Full-Time Shift: Multiple Relocation: No relocation assistance available Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role Newport News Shipbuilding offers competitive pay, weekly paychecks, paid time off, paid holidays, medical benefits including an on-site health center, 401K company match, employee discounts, and more. As a Welder, you will first be qualified through the shipyards state of the art Welding School. After completion of Welding School, you will use a wide range of welding filler metals and welding processes to perform structural and/or pipe welds in all phases of ship construction. Welders perform tack, fillet, and full penetration welding on steel foundations and structural and pipe joints in production on aircraft carriers and submarines. This will be done using various welding processes including SMAW (Shielded Metal Arc Welding), FCAW (Flux Cored Arc Welding), GMAW (Gas Metal Arc Welding), and GTAW (Gas Tungsten Arc Welding). These welds are made in all positions using both manual and mechanized processes and will satisfy all nondestructive tests requirements (visual inspection, magnetic particle inspection, ultrasonic inspection, radiographic inspection). Welders will also receive additional training including certified visual inspection, fire watch, carbon arcing, and troubleshooting minor welding equipment problems. Watch this Welder video to learn more: Must Have Candidates must have at least one year of PIPE WELDING experience, or the completion of an AWS accredited school. Must be able to work assigned shift as production needs. Must be able to work at extreme heights or small confined spaces. Must be able to kneel, squat, crawl, bend, stoop, and climb. Must be able to lift 40 lbs and must take and pass a respirator fit test. Must be able to work indooors/outdoors year round in all weather conditions. Must be able to pass Physical Agility Test. Nice to Have High school graduate or equivalent preferred Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call 1-844-849-8463 for assistance. Press #2 for Newport News Shipbuilding.

WELDER/STRUCTURE EXPERIENCED Location: Newport News, Virginia, United States Date: Sep 9, 2025 Req ID: 42724 Team: X18 WELDERS Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Full-Time Shift: Multiple Relocation: No relocation assistance available Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role Newport News Shipbuilding, a division of Huntington Ingalls Industries, is seeking qualified welders, with 1+ years of hands on WELDING work experience. Newport News Shipbuilding offers competitive pay, weekly paychecks, paid time off, paid holidays, medical benefits including an on-site health center, 401K company match, employee discounts, and more. As a Welder, you will first be qualified through the shipyards state of the art Welding School. After completion of Welding School, you will use a wide range of welding filler metals and welding processes to perform structural and/or pipe welds in all phases of ship construction. Welders perform tack, fillet, and full penetration welding on steel foundations and structural and pipe joints in production on aircraft carriers and submarines. This will be done using various welding processes including SMAW (Shielded Metal Arc Welding), FCAW (Flux Cored Arc Welding), GMAW (Gas Metal Arc Welding), and GTAW (Gas Tungsten Arc Welding). These welds are made in all positions using both manual and mechanized processes and will satisfy all nondestructive tests requirements (visual inspection, magnetic particle inspection, ultrasonic inspection, radiographic inspection). Welders will also receive additional training including certified visual inspection, fire watch, carbon arcing, and troubleshooting minor welding equipment problems. Watch this Welder video to learn more: Must Have Candidates must have at least one year of experience, or the completion of an AWS accredited school. Must be able to work assigned shift as production needs. Must be able to work at extreme heights or small confined spaces. Must be able to kneel, squat, crawl, bend, stoop, and climb. Must be able to lift 40 lbs and must take and pass a respirator fit test. Must be able to work indoors/outdoors year round in all weather conditions. Must be able to pass Physical Agility Test. Must be able to perform overhead work. Must be able to work overtime as needed. Must be willing to undergo a background investigation and drug screen. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call 1-844-849-8463 for assistance. Press #2 for Newport News Shipbuilding.

Requisition Number: 24841 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $43,604.00 - $59,800.00 Security Clearance: None Level of Experience: Senior Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Job Description Join the HII Mission Technologies - Our Refueling and Complex Overhaul (RCOH) works on the only shipyard to execute the RCOH of aircraft carriers halfway through a nuclear-powered aircraft carrier's 50-year service. The mid-life RCOH includes refueling of nuclear reactors, overhauling most machinery, and modernizing warfare systems. RCOH ensures the Navy's aircraft carriers incorporate improved capabilities needed for success in the remaining 25 years of service. Your accomplishments will make a positive impact supporting the U.S. Navy and America's national defense! We are seeking a TSME Welder to join our growing team. The selected candidate will be supporting RCOH by preforming a number of pipefitting processes and related duties on shipboard piping systems to assist with refit and fleet modernization. Essential Job Responsibilities Master understanding of production and processes. Ability to manage, oversee, schedule and assign tasks to one or more multiple jobs. Installs, operates, maintains, repairs and modifies equipment. Performs a variety of maintenance and technical support on products such as equipment, integrated systems and subsystems, and software at customer and/or field locations. Analyzes and evaluates products and related performance. Troubleshoots and diagnoses malfunctions to eliminate problem in minimum time. Installs, upgrades and removes products ensuring coordinative engineering field change. Maintains effective customer communications and relations. May provide onsite training of customer support personnel. Minimum Qualifications • High School education, or Trade School or equivalent, and 6 years of related experience. Prefer technical/professional certifications. Must provide own hand tools as designated per trades specialty., • Must be able to qualify SMAW & GTAW (Stick/Tig) in all processes of carbon and stainless steel (Pipe/Structural) welding within 90 days, • Able to pass general and specific knowledge exam on welder workmanship, • Recognize, set up, and operate hand and power tools common to the welding trade., • Accurately fit-up and install components and foundations., • Interpret drawings and other weld specific documentation, • Be able to communicate verbally and electronically, follow detailed instructions, and be self-motivated., • Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations.\n Preferred Requirements • Worked onboard US Naval Ships., • OSHA 10 Qualification, • Able to supervise small team, providing guidance as needed., • Ability to obtain higher qualifications needed for the project i.e. ( Aluminum, Copper Nickel), • Ability to obtain thin wall qualification, • Knowledge Oxygen/Acetylene and Plasma cutting processes.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Requisition Number: 24841 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $43,604.00 - $59,800.00 Security Clearance: None Level of Experience: Senior Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Job Description Join the HII Mission Technologies - Our Refueling and Complex Overhaul (RCOH) works on the only shipyard to execute the RCOH of aircraft carriers halfway through a nuclear-powered aircraft carrier's 50-year service. The mid-life RCOH includes refueling of nuclear reactors, overhauling most machinery, and modernizing warfare systems. RCOH ensures the Navy's aircraft carriers incorporate improved capabilities needed for success in the remaining 25 years of service. Your accomplishments will make a positive impact supporting the U.S. Navy and America's national defense! We are seeking a TSME Welder to join our growing team. The selected candidate will be supporting RCOH by preforming a number of pipefitting processes and related duties on shipboard piping systems to assist with refit and fleet modernization. Essential Job Responsibilities Master understanding of production and processes. Ability to manage, oversee, schedule and assign tasks to one or more multiple jobs. Installs, operates, maintains, repairs and modifies equipment. Performs a variety of maintenance and technical support on products such as equipment, integrated systems and subsystems, and software at customer and/or field locations. Analyzes and evaluates products and related performance. Troubleshoots and diagnoses malfunctions to eliminate problem in minimum time. Installs, upgrades and removes products ensuring coordinative engineering field change. Maintains effective customer communications and relations. May provide onsite training of customer support personnel. Minimum Qualifications • High School education, or Trade School or equivalent, and 6 years of related experience. Prefer technical/professional certifications. Must provide own hand tools as designated per trades specialty., • Must be able to qualify SMAW & GTAW (Stick/Tig) in all processes of carbon and stainless steel (Pipe/Structural) welding within 90 days, • Able to pass general and specific knowledge exam on welder workmanship, • Recognize, set up, and operate hand and power tools common to the welding trade., • Accurately fit-up and install components and foundations., • Interpret drawings and other weld specific documentation, • Be able to communicate verbally and electronically, follow detailed instructions, and be self-motivated., • Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations.\n Preferred Requirements • Worked onboard US Naval Ships., • OSHA 10 Qualification, • Able to supervise small team, providing guidance as needed., • Ability to obtain higher qualifications needed for the project i.e. ( Aluminum, Copper Nickel), • Ability to obtain thin wall qualification, • Knowledge Oxygen/Acetylene and Plasma cutting processes.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent Job Overview:Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education: High school graduate, or GED Responsibilities: • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location Newport News, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: • Once assigned, reports directly to the project Supervisor in the performance of his/her responsibilities., • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating an machinery., • Ensures that all Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded., • Reads and understands PPE Policy., • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation., • Lays out material prior to performing welding operations to prevent possible errors., • Maintains good housekeeping practices, turning off machines when not in use, disposing of waste properly sweeping the area, etc., • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant., • Ensures that all requirements of the Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management., • Follows detailed repair procedures and instructions (e.g.; SOW, Specs, RCC, etc.) required completing the production operations., • Notifies Supervisor of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.)., • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process., • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW Std. Items., • Ensures control and assumes responsibility for Level I material controls., • Expertly performs all tasks required as a Welder. Provides mentoring to junior craftsman., • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures., • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop., • 5 years' experience as a welder., • Qualifies as a Welder/Workmanship Inspector in accordance with welding procedures., • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade., • Must be qualified in a minimum of 5 welding/brazing processes to include SMAW, GTAW, FCAW., • Ability to obtain and maintain access to US Navy ships and government facilities., • Ability to communicate effectively, work independently or in a group., • Ability to do basic math, i.e. add, subtract, divide and multiply., • 25' Tape, • Center Punch, • 3 lb beater, • Chalk Box, • Pencil, • Combination Square, • Burning goggles, • Striker, • Full Face Welding Shield, • Welding Gloves, • Slag Hammer, • Bottle Wrench, • 12" Crescent Wrench, • Wire Cutters, • Pliers TO APPLY FOR THIS POSITION, GO HERE:

Flux Core Welder at Riggins Co in Hampton, VA Are you tired of feeling like just another badge number at work? Do you ever feel like no matter how hard you hustle, it's never enough? At Riggins Company, we believe that you don't have to be miserable at your job. There is a better way, and it's here with us! We genuinely care about our team members, and it shows in everything we do. \n • \nIt's a fun place to work: We foster a supportive and enjoyable work environment where you can truly take pride in what you do. \n Description: Riggins Company, located in Hampton, VA, is known for its exceptional work in custom steel fabrication. We are currently seeking skilled Flux Core Welders. As part of our team, you will have the opportunity to showcase your expertise in crafting large structural fixtures for the US Navy and various industries in a work environment that is team-oriented, supportive, and focused on quality. Why Choose Riggins Company: \n • Competitive pay rates\n, • Comprehensive benefits package, including healthcare and retirement plans\n, • Enjoy monthly bonuses, vacation time, and personal leave.\n, • Consistent overtime is available, but not required.\n, • Closed Sundays\n, • Conveniently located in Hampton, VA, minutes off 664\n, • Must pass a FLUX CORE weld test.\n, • Must pass 3G and 4G open root plate tests (x-ray and bend test).\n, • Minimum of 5 years of welding experience in the fabrication industry.\n, • Read and comprehend blueprints, sketches, and templates.\n, • Efficient with cutting torches, burning, and plasma torches.\n, • Clean and prepare surfaces to be welded.\n, • Competitive skill based pay\n, • Insurance offered: Health, Dental, Vision, Life and Disability.\n, • 401(k) with company matching.\n, • Vacation, Personal Leave, and Holiday Pay.\n NOTE: The pay rate is determined by skill level and experience; weld tests are given as part of the interview process. To learn more about Riggins, visit us online at and follow us on social media at @rigginsco. You can find us on Instagram, Facebook, LinkedIn, and Google.

Flux Core Welder at Riggins Co in Hampton, VA Are you tired of feeling like just another badge number at work? Do you ever feel like no matter how hard you hustle, it's never enough? At Riggins Company, we believe that you don't have to be miserable at your job. There is a better way, and it's here with us! We genuinely care about our team members, and it shows in everything we do. \n • \nIt's a fun place to work: We foster a supportive and enjoyable work environment where you can truly take pride in what you do. \n Description: Riggins Company, located in Hampton, VA, is known for its exceptional work in custom steel fabrication. We are currently seeking skilled Flux Core Welders. As part of our team, you will have the opportunity to showcase your expertise in crafting large structural fixtures for the US Navy and various industries in a work environment that is team-oriented, supportive, and focused on quality. Why Choose Riggins Company: \n • Competitive pay rates\n, • Comprehensive benefits package, including healthcare and retirement plans\n, • Enjoy monthly bonuses, vacation time, and personal leave.\n, • Consistent overtime is available, but not required.\n, • Closed Sundays\n, • Conveniently located in Hampton, VA, minutes off 664\n, • Must pass a FLUX CORE weld test.\n, • Must pass 3G and 4G open root plate tests (x-ray and bend test).\n, • Minimum of 5 years of welding experience in the fabrication industry.\n, • Read and comprehend blueprints, sketches, and templates.\n, • Efficient with cutting torches, burning, and plasma torches.\n, • Clean and prepare surfaces to be welded.\n, • Competitive skill based pay\n, • Insurance offered: Health, Dental, Vision, Life and Disability.\n, • 401(k) with company matching.\n, • Vacation, Personal Leave, and Holiday Pay.\n NOTE: The pay rate is determined by skill level and experience; weld tests are given as part of the interview process. To learn more about Riggins, visit us online at and follow us on social media at @rigginsco. You can find us on Instagram, Facebook, LinkedIn, and Google.

Job DescriptionJob Title: Structural Welder/Fitter $45 & $140 in per diem. This position is located in Newport News, Virginia paying $45 and $140 in per diem Job Description We are seeking an experienced Advanced Shipfitter with a minimum of four years of commercial or naval experience as a first-class Shipfitter The ideal candidate will have extensive skills in single pass tack welding, burning, heating, and the ability to read and comprehend complex structural assembly drawings, blueprints, and sketches. Responsibilities • Perform multi-pass tack welding using the Shielded Metal Arc Welding (SMAW) process., • Operate burning and heating equipment, specifically oxygen/propane burning torches., • Interpret complex structural assembly drawings, blueprints, and sketches, including weld symbols, material types, datum, and reference lines., • Comprehend fractional dimensions using a ruler and lay off piece parts for fabrication and assembly., • Assemble structural piece parts according to specifications with high-quality standards., • Work effectively in physically demanding environments such as shipbuilding or steel fabrication., • Ensure compliance with OSHA regulations relevant to the shipbuilding industry. Essential Skills • Single & Multi Pass Tack Welding, • Burning using Oxygen/Propane Burning Torch, • Heating using Oxygen/Propane Heating Torch, • Ability to read and interpret complex structural assembly drawings, blueprints, and sketches, • Ability to comprehend fractional dimensions using a ruler All Shipfitters will be required to pass a Single Pass Tack Welder Qualification Test upon reporting for the first day of work. This test will be: A. Using the Shielded Metal Arc Welding (SMAW) Process. B. With MIL-10718-M (A-5A) Filler Metal of MIL-E-22200/1. C. In both the Vertical Up (3F) and Overhead (4F) positions. The Welding School will administer the following tests: A. Multiple Pass Tack Weld consisting of: • One (1) hour practice, • One (1) hour Vertical test The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Newport News,VA. Application Deadline This position is anticipated to close on Oct 21, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Chipton-Ross is seeking multiple Advanced Shipfitter/Fabricator (Multi-Pass Tack & Burn) for a contract opportunity in Newport News, VA. BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): Four years of commercial/naval experience as a first class Shipfitter. Experience must be documented on "Advanced Shipfitter Summary Sheet" prior to arrival at NNS. 1. Multi-Pass Tack Welding. 2. Burning-Oxygen/Propane Burning Torch. 3. Heating-Oxygen/Propane Heating Torch. 4. Ability to comprehend complex structural assembly drawings, blueprints, and sketches to include weld symbols, material types, datum and reference lines. 5. Ability to comprehend fractional dimensions as with the use of a ruler. 6. Ability to layoff piece parts for fabrication and assembly. 7. Ability to assemble structural piece parts in accordance with specifications in a quality manner. 8. Experience working in a physically demanding environment (shipbuilding, steel fabrication, etc.). 9. Familiarity with OSHA regulations relative to the shipbuilding industry. 10. Use vibratory tools (grinders and needle guns). 11. Air Carbon Arc Gouging. 12. Ability to use Work Packages and Drawings to plan and execute work. 13. Ability to use Molded Lines and Ship Reference Lines to execute required work. 14. Ability to Erect, Set and Makeup Complex-shaped Shell Plates. 15. Ability to Erect, Set and Makeup Decks, Bulkheads, Longitudinals, trunks, etc:, 16. Ability to Install and Replace Hull Inserts and Penetrations, Ability to Install Miscellaneous and Complex Foundations. * PPE training means general requirements, eye and face protection, head protection, foot protection, hand and body protection, hearing protection, and body harness-personal fall arrest systems (PFAS) and position device systems. PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE: 1. Rigger/Material Handling 2. Optical instrument experience (Level, Transit) 3. Shipwright / Erect & Set experience. 4. Tank Testing 5. Mobile equipment operation (JLG, Scissor Lift, etc.) Tack Welding Qualification: All Shipfitters will be required to pass a Multi-Pass Tack Welder Qualification Test upon reporting for the first day of work. This test will be: A. Using the Shielded Metal Arc Welding (SMAW) Process. B. With MIL-10718-M (A-5A) Filler Metal of MIL-E-22200/1. C. In both the Vertical Up (3F) and Overhead (4F) positions. The Welding School will administer the following tests: A. Multi-Pass Tack Weld consisting of: o One (1) hour practice o One (1) hour Vertical test o One (1) hour Overhead test B. Visual Inspection of Weld Level I o Six (6) hours. Prior to performing work at Newport News all Shipfitters must successfully pass, without training, the above tests at the Newport News welding school. WORK HOURS: All shifts. Employment will be contingent on clearing a drug screen and background check. Both must clear prior to start date.

Job Description Travel Welder/Fabricator Position Job Title: Structural Welder/Fitter $45 & $140 in per diem. This position is located in Newport News, Virginia paying $45 and $140 in per diem Job Description We are seeking an experienced Advanced Shipfitter with a minimum of four years of commercial or naval experience as a first-class Shipfitter The ideal candidate will have extensive skills in single pass tack welding, burning, heating, and the ability to read and comprehend complex structural assembly drawings, blueprints, and sketches. Responsibilities • Perform multi-pass tack welding using the Shielded Metal Arc Welding (SMAW) process., • Operate burning and heating equipment, specifically oxygen/propane burning torches., • Interpret complex structural assembly drawings, blueprints, and sketches, including weld symbols, material types, datum, and reference lines., • Comprehend fractional dimensions using a ruler and lay off piece parts for fabrication and assembly., • Assemble structural piece parts according to specifications with high-quality standards., • Work effectively in physically demanding environments such as shipbuilding or steel fabrication., • Ensure compliance with OSHA regulations relevant to the shipbuilding industry., • Single & Multi Pass Tack Welding, • Burning using Oxygen/Propane Burning Torch, • Heating using Oxygen/Propane Heating Torch, • Ability to read and interpret complex structural assembly drawings, blueprints, and sketches, • Ability to comprehend fractional dimensions using a ruler The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Newport News,VA. Application Deadline This position is anticipated to close on Oct 13, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

The Pipe Welder will utilize a variety of welding filler metals and processes to perform pipe welds throughout all phases of ship construction.