Education design jobs in RichmondCreate job alerts

At OFG we allow for greater work life balance and extra time to do the things you love outside work Job Title: SEN Teacher Location: Barton School, Barton-upon-Humber DN18 6DA Hours: 40 hours per week | Monday to Friday | 8.00am - 4.00pm Salary: Up to £42,500 per annum (depending on experience, not pro rata) Contract: Permanent | Term Time plus 5 Training Days Start: September 2026 UK applicants only – no sponsorship available About the Role As an SEN Teacher, you will play a vital role in delivering a high‑quality, person‑centred education for pupils with special educational needs, in line with Company policies, procedures and the standards set by the Regulatory Body. You will create engaging and supportive learning experiences that enable every pupil to make meaningful progress—academically, socially and emotionally. Key Responsibilities • Plan and deliver teaching for individual pupils or small groups, following the School’s Curriculum Framework and associated policies., • Monitor, assess, record and report on each student’s progress, ensuring learning is appropriately challenging and personalised., • Contribute to whole‑school development, supporting initiatives linked to the School Development Plan., • Promote pupils’ educational, physical and moral development, in alignment with Company values and policies., • Design and implement personalised learning environments and programmes that support steady and appropriate progression for each learner., • Lead and coordinate subject areas or key stages, as agreed with the Head Teacher, including assessment and curriculum development., • Create, review and implement individual education plans (IEPs), behaviour plans and other personalised support documents, working collaboratively with colleagues., • Organise and maintain an engaging classroom environment, ensuring resources, displays and groupings stimulate learning and reflect pupils’ needs., • Plan for pupil safety, adhering to risk assessments for all on‑site and off‑site activities., • Support and guide Learning Support Assistants, Tutors and Instructors, ensuring they are well briefed and equipped to deliver effective support., • Manage and support challenging behaviour, helping pupils progress from relying on external control to developing self-regulation., • Work collaboratively as part of a multi‑disciplinary team, maintaining positive and effective relationships with all colleagues., • Access opportunities for subject leadership, contributing to school-wide improvement and strategy. Qualifications Required UK Qualified Teacher Status (QTS) or equivalent About Us Options Barton School is an independent special school in North Lincolnshire for children and young people aged 5–19 with autism and associated complex needs and behaviours that challenge. Located in Barton-upon-Humber, we are easily accessible from Barton, Scunthorpe, Doncaster, Hull, and the surrounding towns. For over 19 years, Options Autism has provided specialist care and education for children, young people, and adults with autism, complex needs, and learning difficulties. As part of Outcomes First Group, we are pioneering innovative, evidence-based approaches that deliver meaningful, measurable outcomes for everyone in our care. We are really proud to say that in 2025 Outcomes First Group were officially certified as a ‘Great Place to Work’ for the sixth year running. Why Join Us? We place pupils and vulnerable young adults at the heart of everything we do, so every day brings the satisfaction of making a real difference. We are committed to the safeguarding and promoting the welfare of pupils and young people. All applicants will be subject to social media checks and successful applicants to a fully enhanced DBS. • Life Assurance, • Pension scheme with options to increase contributions, • “Your Wellbeing Matters” – mental health support and physical health checks, • Flexible Benefits Platform (Vista), including:, • Health, wellbeing and insurance benefits, • Hundreds of UK and international discounts, • Cycle to Work Scheme & Electric Car Purchase Scheme, • Critical illness cover, • Family Growth Support, including enhanced maternity/paternity leave and paid fertility treatment support We reserve the right to close the vacancy early if we receive a high volume of suitable applications. Outcomes First Group is committed to carrying out a fair, thorough and efficient recruitment process in line with Keeping Children Safe in Education. Whilst we aim to keep applicants informed throughout, Outcomes First Group does not accept liability for any loss of earnings or other associated costs incurred by applicants as a result of delays or changes in the compliance process. All stages of the compliance process are subject to necessary safeguarding checks and compliance with statutory requirements, which may affect timescales. #1

Global Head of Food Safety & Defence Location: Hybrid, West London – 2 days a week in office Salary: Up to £150,000 + benefits An ambitious, fast-growing food manufacturing business is seeking a Global Head of Food Safety & Defence. This organisation is a custodian of well-known international brands and is committed to maintaining the highest standards in product quality, ingredients, and talent. The successful candidate will thrive in a purpose-driven, fast-paced environment that values agility, collaboration, accountability, and continuous improvement. This is a senior leadership role offering global scope, strategic influence, and the opportunity to make a significant impact. The Global Head of Food Safety & Defence is accountable for protecting consumers and global brands by leading the design, governance, and execution of food safety and food defence programmes worldwide. This role ensures that products are developed, manufactured, and distributed safely, consistently, and in full compliance with regulatory and customer expectations. It also provides strategic leadership in preventing, detecting, and responding to intentional threats such as adulteration, tampering, and extortion. The position serves as the organisation’s leading subject matter expert in food safety science, including microbiology, toxicology, contaminants, allergens, hygiene, and food defence. Key Responsibilities Global Strategy & Governance • Define and lead the global food safety and defence strategy aligned with business objectives and regulatory requirements, • Establish policies, standards, and performance metrics across food safety, hygiene, allergen control, traceability, and defence, • Lead governance forums and represent food safety at executive level, • Embed food safety and defence considerations into innovation, supply chain, procurement, and operations Food Safety Systems & Compliance • Oversee implementation of global food safety systems (HACCP, environmental monitoring, sanitation, GMP, allergen management), • Ensure compliance with global standards (e.g., BRCGS, FSSC 22000, ISO 22000) and customer requirements, • Lead global audit programmes and oversee regional quality teams, • Develop risk frameworks for high-risk ingredients (e.g., cocoa, dairy, nuts, flavourings), • Food Defence & Product Security, • Lead vulnerability assessments (TACCP/VACCP) and mitigation strategies, • Collaborate with Security, Procurement, and Supply Chain to protect assets and processes, • Ensure product integrity across all logistics and third-party partners Incident Management & Crisis Response • Act as global technical lead for food safety and defence incidents, including contamination, allergen breaches, microbiological events, and malicious threats, • Lead root cause analysis and corrective/preventive actions, • Partner with Legal, Communications, Security, and Regulatory teams during crises Scientific Leadership & Innovation • Provide expertise in microbiology, toxicology, allergens, and emerging food safety risks, • Advise R&D and Operations on hygienic design, processing, and new technologies, • Lead horizon scanning for emerging risks (e.g., fraud, climate impacts, cyber-physical threats), • Collaborate with Regulatory Affairs on assessing and mitigating regulatory changes Talent, Training & Culture • Build and lead a high-performing global food safety and defence function, • Develop training frameworks and certification programmes (including TACCP/VACCP), • Foster a strong, proactive food safety culture across all levels of the organisation External Engagement • Represent the organisation at global forums, regulatory bodies, and industry groups, • Build partnerships with academic institutions and external experts, • Benchmark and implement industry best practices Candidate Profile Education • Degree in Food Science, Microbiology, Chemistry, Public Health, or related field, • Advanced qualifications (PhD or MBA), • Formal training in HACCP, TACCP/VACCP, and relevant regulatory frameworks Experience • Extensive experience in food safety, quality, and risk management within FMCG or large-scale food manufacturing, • Proven leadership of global or multi-regional teams, • Strong experience managing complex supply chains and high-risk ingredients, • Demonstrated success handling major food safety or product security incidents, • Experience in confectionery, chocolate, or bakery sectors advantageous Technical Expertise • Deep knowledge of HACCP/HARPC, GMP, GFSI standards, and global regulations, • Strong grounding in microbiology, toxicology, allergens, and hygienic design, • Expertise in food defence methodologies and risk assessment tools, • Familiarity with digital food safety systems, traceability, and data analytics Key Competencies • Strategic leadership and global influence, • Strong risk assessment and decision-making capability, • Effective crisis management under pressure, • Cross-functional collaboration across technical and non-technical teams, • High level of scientific credibility and innovation mindset, • Cultural agility in global environments, • Clear and impactful communication of complex topics Rewards & Benefits • Competitive benefits package including pension, life assurance, and health plans, • Generous annual leave and flexible benefits, • Wellbeing and employee assistance programmes, • Access to training and development opportunities, • Additional perks such as volunteering days and lifestyle schemes

Subsea Engineering Lead/ Manager Initial 12 Month Contract Outside IR35 Chiswick, London – 3 days per week in office, 2 days per week working from home A fantastic opportunity has become available for a Subsea Engineering Lead/ Manager to work for an operator in the London area. The ideal candidate will have experience of multiphase pumps (MPP) Description Job Purpose: • The key purpose of the role is to provide Subsea Engineering input, oversight, and discipline technical leadership to key Development Studies and Projects (i.e. all the way from Assess to Execute) for Jubilee, • As the Subsea Engineering Lead/ Manager, you will be part of a small owner’s team, the incumbent will also be expected to drive project and contractor performance and support the project manager in ensuring timely, high quality and safe delivery, • Identify and promote value engineering opportunities in subsea scopes, • The role is primarily to support the Jubilee Subsea Multiphase Pumps (MPPs) and also Jubilee Life-of-field Tie-ins (LoFT), but will be expected to provide support to ad hoc project and studies scope that arise, along with the required LLIs for Campaign 2 Responsibilities / Key Objectives: EHS • Demonstrate personal leadership and commitment to EHS performance, • Participate in identification of the major EHS hazards for all scopes, particularly during the early stages of development and support mitigations to acceptable risk levels., • Support project teams and execution contractors to deliver projects, without compromise on safety or quality. Subsea Discipline Engineering • Preparation of subsea basis of design and contractor scopes of work (including the required international/industry standards), • As the Subsea Engineering Lead/ Manager, you will supervise contractor subsea engineering, review subsea engineering deliverables, and provide technical steer and guidance to contractors to optimise design and installation methodologies to achieve the companies project goals, • Review and approval of subsea management of change, respond to technical queries, and prepare subsea Decision Record Memorandums, • As the Subsea Engineering Lead/ Manager, you will propose innovative subsea solutions to optimise subsea development opportunities Technical Coordination and Project Engineering • Lead the development of subsea Scopes of Work / Statement of Requirements, • Ensure that contractors are delivering to the required company and international/industry standards, and meeting cost, schedule and quality requirements, • As the Subsea Engineering Lead/ Manager, you will coordinate technical input from all Company stakeholders including offshore and onshore Operations Disciplines, • Assist with technical assurance audits / peer reviews / peer audits and Gate assurance reviews Education: Tertiary Engineering qualification at degree level Skills: • Minimum 20 years experience in Oil and Gas with 10 years in Subsea Engineering, preferably with deepwater project experience through all stages of the project lifecycle, • As the Subsea Engineering Lead/ Manager, you will have a broad multi-discipline understanding of Subsea Engineering (controls, foundations, structures, pipelines, flexible pipe, umbilicals, vessels, installation, etc), • Deep experience of subsea controls and/or subsea processing will be highly regarded, • As the Subsea Engineering Lead/ Manager, you will have knowledge of the key engineering standards applicable to Subsea Engineering hardware and installation, • Proven understanding of offshore construction, installation and commissioning activities & key interfaces with respect to project management, planning & execution Business Behaviours: • Able to understand the linkage between engineering decisions and overall project outcomes, and drive robust, fit-for-purpose decision making, • Able to progress and prioritize several simultaneous activities, • Methodical, thorough, conscientious to ensure high quality technical output, • Strong interpersonal skills needed to manage internal and external stakeholders and ensure contractor performance. Dynamic and resilient; able to adapt to change.

Role Title: Sales Operations Manager Location: Hammersmith / Hybrid Reporting to: Group COO Company: Scaling global Fintech group (privately owned, debt-free, strong balance sheet) The Opportunity We are a high-growth, global Fintech group of companies with a strong financial position and ambitious plans to 3–4x the size of the business over the coming years. As we scale internationally and continue to professionalise our commercial organisation, we are creating a new Sales Operations Manager role to work closely with our Group COO and senior commercial leadership team. This is a high-impact, high-exposure position designed for a commercially minded, analytically strong individual with a background in Sales Operations, Revenue Operations or Commercial Strategy who is ready to take the next step in their career. The role will sit at the intersection of Sales, Marketing, Finance, Product & Operations, and will play a key role in building the operational engine behind our revenue growth. A core focus of the role will be building the systems, processes, and insights that enable our commercial teams to operate efficiently and scale globally — from pipeline visibility and forecasting to CRM optimisation and commercial performance analytics. Key Responsibilities Building the Revenue Operations Engine • Design and implement scalable sales and revenue operations processes that support a rapidly growing commercial organisation., • Create clear frameworks for lead management, pipeline progression, forecasting and revenue tracking., • Identify operational bottlenecks in the commercial funnel and implement solutions that improve conversion, efficiency and sales productivity., • Ensure the commercial organisation is operating with clear processes, consistent data, and strong operational discipline. Pipeline Visibility & Revenue Performance • Own sales reporting, performance dashboards and revenue analytics across the Group., • Provide insight into pipeline health, conversion rates, deal velocity and sales productivity., • Partner with Sales leadership on forecasting, target-setting and pipeline reviews., • Use data to identify performance trends and recommend improvements to drive revenue growth. CRM, Systems & Commercial Data Infrastructure • Own the CRM and sales technology stack, ensuring it supports scalable commercial growth., • Drive CRM optimisation, data quality, reporting structures and automation across the commercial organisation., • Evaluate and implement tools that improve pipeline visibility, workflow automation and sales productivity., • Ensure leadership has accurate, real-time insight into revenue performance and pipeline health. Commercial Planning & Growth Initiatives • Partner with Finance and leadership on sales forecasting, budgeting and commercial planning., • Support revenue modelling, market expansion initiatives and new product launches., • Help design scalable commercial operating models as the company expands into new markets., • Support leadership with board-level reporting, business planning and strategic commercial initiatives. Cross-Functional Collaboration • Act as the operational bridge between Sales, Marketing, Finance, Product and Operations., • Ensure alignment across the full revenue funnel — from lead generation through to closed revenue and reporting., • Support international market expansion by building the processes and reporting needed to scale commercial activity globally., • Embed a data-driven culture within the commercial organisation. Candidate Profile Background & Experience • 2–4+ years’ experience in a Sales Operations, Revenue Operations, Commercial Operations or Strategy role., • Experience in high-growth SaaS, Fintech, Payments or Technology companies is highly desirable., • Strong experience working with CRM platforms (Salesforce, HubSpot or similar) and commercial analytics tools., • Experience supporting scaling sales teams and building operational frameworks for growth., • Background in consulting, business analytics or commercial strategy is a plus. Education • Strong academic background (Bachelor’s degree required; Master’s, MBA or equivalent a plus)., • Degree in Business, Economics, Finance, Engineering or a related discipline preferred. Skills & Attributes • Highly analytical with strong commercial instincts and problem-solving skills., • Deep understanding of sales funnels, pipeline dynamics and revenue performance metrics., • Strong experience building sales reporting, dashboards and forecasting models., • Systems-oriented and comfortable managing CRM infrastructure and sales technology stacks., • Able to translate complex data into clear, actionable commercial insight., • Strong stakeholder management skills — comfortable presenting to and influencing senior leadership., • Proactive, organised and comfortable operating in a fast-moving, high-growth environment., • Curious and intellectually ambitious; thrives in ambiguity and enjoys building things from first principles. Why Join Us? • Direct exposure to senior leadership and the opportunity to shape how the commercial organisation scales globally., • Play a key role in building the revenue operations infrastructure behind a rapidly growing global Fintech., • Join a financially strong, privately owned business with no debt and long-term ambition., • Work on international expansion and new market launches, with real commercial impact., • Significant scope for career progression as the Group continues to scale., • A role that combines data, systems, commercial insight and strategic impact. This role is ideal for a high-potential Sales Operations or Revenue Operations professional looking to step into a broader, more influential position within a fast-growing global Fintech.

Graduate Electrical Design Engineer – Building Services /MEP £28k - £30k Southwest London, Near Hampton Extensive Training, Development and Mentoring Building Services / Electrical Design Engineer / Trainee Electrical Design / MEP / Engineer / Graduate Electrical Design Engineer / Graduate Electrical Engineer This role is to join the building services design team within a highly regarded building services design consultancy. They have a great ethos and high professional standards making them the perfect place for your formative years as an electrical design engineer. They are responsible for the design of all the mechanical and electrical functions within buildings such as HVAC, lifts, lighting, hot and cold water systems, plant rooms, access control, fire alarm systems and data coms. These functions can be applied to almost every type of building so you could be working on projects in any of the following sectors commercial, retail, hospitality, industrial and education. This role will be working within a team alongside senior electrical design engineers, taking on more responsibilities as you develop as an engineer. Responsibilities • Assisting senior design engineers with the preparation of outline design schemes., • Visiting site during the construction phase to monitor progress., • Production of drawings under the direction of Engineers., • Assisting with the checking of documents and carry out detailed calculations., • Learning the latest building regulations and technical standards, • Undertaking duties to develop your experience and further your training in Electrical Engineering. Qualifications Required • MEng / BEng in Electrical Engineering, • Proficient with Microsoft Excel and Microsoft Project, • Unfortunately, this employer does not have the ability to provide sponsorship so, • temporary UK working visas, including graduate and psw visas will not be accepted.

Position Title: Regional Sales Manager Location: North of England & Scotland region Department: Sales Title of Supervisor: UK Sales & Managing Director Main Purpose of the job: Responsible for identifying, developing, supporting, and delivering new and existing business opportunities within the Northern region which will help the company achieve its sales target plus its business strategic objectives. To promote the Company and the brand by working with the Merchant head offices, branches, Consultants, Specifiers, Design Houses, OEMs, and all other customers to maximise opportunities and make sales throughout the supply chain for the clients product range with particular emphasis on the valve & actuator portfolio. Focus on water utility, large commercial and industrial end-user application. Responsibilities and Duties • Implementing a robust and sustainable business activity to demonstrate year on year growth to meet the company's strategic aims, goals and objectives plus the pull and push strategy., • Identify key influencers within the customers and region to develop business, new product launches and Marketing strategies and make the client a tier one or a preferred supplier., • Setting, negotiating, and implementing all agreed teams and conditions (T&C's) with their customers., • Identify new business opportunities within the customers in the region and develop into orders., • Achieve and exceed sales targets and margins set by the client and the UK Sales Director., • Assist in the development of sales and marketing literature and associated documents to improve the clients brand awareness and recognition., • Provide the main source of expertise to the company on business development issues in relation to the North Region., • Update the company CRM system with all information on all designated customers including orders and projects., • Maintain all required records of sales and other relevant information to enable performance to be measured, monitored, qualified and quantified., • Conduct product training, demonstrations through hosting lunch & learn & CPD training sessions., • To support new and existing customers with product specifications & selection., • Support the Sales Leader within the Head Office to report performance, business, business growth, aims, goals and objectives and other reports back to the shareholder and the business., • To follow the Company's and Group's internal and external procedures, • To carry out any such other duties that may reasonably be requested of you. Education • Engineering or mechanical qualification, degree-level or equivalent. Management • This role has no direct reports. Experience, skills and qualities. • At least three years’ experience & proven track record within relevant industry related to fluid solutions, flow control, water utilities, mechanical equipment, industrial components, rotating equipment, HVAC, plumbing / heating solutions or wider building technologies, • Proven sales track record through a range of channels such as Solution sales, Wholesalers, Distributors, Consultants, Developers, OEM’s, Valves Companies and End Users., • Excellent Commercial knowledge and experience., • Good communication and presentation skills., • An extensive understanding of the industry and the customers within the industry., • Excellent capability of IT systems including Microsoft office, CRM systems (Salesforce)

About the job Job summary Senior Business Analyst As a Senior Business Analyst at the Intellectual Property Office (IPO) you will join an established and supportive community of Business Analysts and work across all areas of projects and service lifecycle. In this role you will work as part of an Agile multi-disciplinary squad alongside product managers, service design, data specialists, developers, and testers to deliver new internal and external services. You will be expected to be proactive and take ownership of analysis activities and deliverables including writing user stories with acceptance criteria, modelling business processes, and contributing to three amigo/refinement sessions. You must be able to build strong working relationships with both internal and external stakeholders at all levels, demonstrating good leadership and collaborative working skills. You will need excellent presentation and communication skills, across a variety of situations and levels of stakeholders. You will work together with IPO colleagues, partner organisations and/or suppliers to ensure that approaches and outcomes are fit for purpose meeting business needs, user needs and IPO standards. Within the Business Analyst Community, you will play an important role in establishing and promoting best practice and standards. You will support the professionalisation and maturity of the Business Analysis practice through peer support, tutoring and mentoring of others in the team. We are looking for enthusiastic people with a desire to pick up new skills in a fast-paced environment and are committed to delivering excellent services for our customers. This is an excellent opportunity for individuals to join our IT team at a time where the IPO has set out how to help make the UK the most innovative and creative country in the world by: • Delivering Excellent IP Services, • Creating a World-leading IP Environment, • Making the IPO a Brilliant Place to Work Working Style This role will be carried out in-line with IPO Hybrid working arrangements where staff are currently expected to spend at least 20% of their time working onsite from one of our offices. This role is based in our Newport Office . The requirement for attendance at an office location can vary by role so we would encourage candidates to discuss working arrangements with the recruiting manager to agree a reasonable balance between working from home and the office. Job description Main duties consist of but are not limited to: • Work alongside product managers to create a pipeline of fully developed user stories ensuring that the business and technical viewpoints are understood and acknowledged., • Undertake key business analysis activities, including but not limited to, requirements elicitation, documentation of business processes, workflows and business rules, using suitable methodologies, tools and standards., • Advise on business scenarios and develop acceptance criteria to ensure requirements can be traced to develop new functionality., • Identify and articulate options considering opportunities and limitations related to business and technology., • Present complex information in a tailored format, allowing you to communicate key findings and put forward recommendations to the wider organisation., • Tutor/mentor/coach BAs and Junior BAs by providing accurate and professional support., • Develop and promote best practice, standards and guidance. Person specification Essential Criteria • Background in Business Analysis with considerable knowledge and understanding of Business Analysis principles and techniques., • Excellent analytical and problem-solving skills to bring clarity to business problems and shape business solutions., • Considerable experience working in a software development setting with technical colleagues i.e. data, developers, testers., • Comfortable working with individuals at various skill levels up to and including senior management levels., • Experience of gaining consensus where there are strong differing opinions., • Strong presentation and communication skills across a variety of situations and levels of stakeholders., • Experience of developing BA best practice, standards and guidance., • Experience tutoring and mentoring others Business Analysts, • BCS International Diploma in Business Analysis, or equivalent. How to Apply Click the 'Apply now' button and complete the application form by providing the following: Your CV • Upload an anonymised copy of your current CV. Please remove all identifying markers such as name, title, education institution etc., • Make sure it clearly shows how you meet the essential criteria listed in the Person Specification. 750-word Personal Statement • Use this to explain why you're suitable for the role ., • Structure your statement around the essential criteria in the Person Specification., • Make sure to provide clear examples to show how you meet each For further information on the sift and interview stages of this recruitment campaign, please head to our 'Things you need to know' section below. Please visit our Civil Service Careers page - IPO - Recruitment Support , Civil Service Careers (civil-service-careers.gov.uk) If you require job-specific information, please contact Dominic Read E-mail: Telephone: Qualifications Candidates must hold a BCS Diploma to be eligible to apply for this role Behaviours We'll assess you against these behaviours during the selection process: • Communicating and Influencing, • Working Together, • Changing and Improving Benefits Alongside your salary of 47,766, Intellectual Property Office contributes 13,837 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides. • Unlimited Pluralsight video learning access, • Access to Microsoft's ESI training suite, • Hybrid working with no core hours, • Substantial support for career progression, • 25 days annual leave moving to 30 days in annual increments, • You will also get 8 days public leave and 1 day privilege leave For more information about what's on offer at the Intellectual Property Office please review our IPO benefit pack attached to the bottom of this advert. Please note that benefits may be subject to change. Things you need to know Artificial intelligence Artificial intelligence can be a useful tool to support your application, however, all examples and statements provided must be truthful, factually accurate and taken directly from your own experience. Where plagiarism has been identified (presenting the ideas and experiences of others, or generated by artificial intelligence, as your own) applications may be withdrawn and internal candidates may be subject to disciplinary action. Please see our candidate guidance (opens in a new window) for more information on appropriate and inappropriate use. Selection process details This vacancy is using Success Profiles (opens in a new window) , and will assess your Behaviours and Experience. Additional details on security and vetting Successful candidates must pass a disclosure and barring security check and if successful you must also hold, or be willing to obtain, a higher Security Clearance . For meaningful checks to be carried out individuals will need to have lived in the UK for a sufficient period of time, depending on the level of clearance, to enable appropriate checks to be carried out and produce a result which provides the required level of assurance. For this role the successful individual will need to have consistently lived in the UK for a minimum 5 years in order to meet the relevant security clearance. Further information on the vetting process can be found at National security vetting: clearance levels - GOV.UK If you have questions regarding this or are unsure if you meet the eligibility criteria, please contact Stage 1 - Sift An initial sift of applications will be carried out to create a shortlist. This will be based on the evidence provided for the following Success Profile elements: Experience Your CV will be used to assess your suitability for the role and Your 750 word Personal statement will demonstrate your Experience against the listed person specification/essential criteria Stage 2 - Virtual Interview If successful at sift you will be invited to attend a Virtual interview via Teams where you will be assessed against the Experience success profile, If successful you will then be invited to an in person interview Specific information regarding the Success Profile elements that will be assessed at interview will be contained within the interview invitation. Stage 3 - In person Interviews If invited to interview Behaviours based questioning will be used. Specific information regarding the Success Profile elements that will be assessed at interview will be contained within the interview invitation. Stage 3 Interviews for this role will be carried out in person at our Newport Office. This recruitment campaign will keep a reserve list for 12 months. If you meet the requirements for this role but aren't offered after passing the interview, you'll be placed on the reserve list. If a suitable position opens up during this time, we will reach out to individuals in merit order. Applicants to note: CVs sent direct to the IPO will not be accepted. There may be important information contained within the job role profile candidates may also wish to refer to. We recommend candidates download and save a copy of the role profile for reference. This post is being advertised to Internal , across Government and external candidates at the same time. Incomplete and/or late submissions will not be accepted or considered. Feedback will only be provided if you attend an interview or assessment. We do not routinely reimburse travel expenses for candidates, however if participating in the selection process would cause you undue financial hardship or if it restricts your ability to participate, please contact the recruitment team for more information. In line with Government guidance, successfully appointed candidates will need to provide documents for our Right to Work checks. Information on this will be sent within the invite to interview text. If you require a reasonable adjustment at any stage of the recruitment process, then please let the recruitment team know via; Please be aware that only one application per candidate is permitted for each recruitment campaign. Multiple applications, including those made using different accounts, may result in your application being withdrawn or rejected at any stage of the process. For more information on the IPO's terms and conditions, please review the attached IPO Modernised Terms and Conditions document attached at the bottom of this advert. Feedback will only be provided if you attend an interview or assessment. Security Successful candidates must undergo a criminal record check. Successful candidates must meet the security requirements before they can be appointed. The level of security needed is security check (opens in a new window) . See our vetting charter (opens in a new window) . People working with government assets must complete baseline personnel security standard (opens in new window) checks. Nationality requirements This job is broadly open to the following groups: • UK nationals, • nationals of the Republic of Ireland, • nationals of Commonwealth countries who have the right to work in the UK, • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities with settled or pre-settled status under the European Union Settlement Scheme (EUSS) (opens in a new window), • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities who have made a valid application for settled or pre-settled status under the European Union Settlement Scheme (EUSS), • individuals with limited leave to remain or indefinite leave to remain who were eligible to apply for EUSS on or before 31 December 2020, • Turkish nationals, and certain family members of Turkish nationals, who have accrued the right to work in the Civil Service Further information on nationality requirements (opens in a new window) Working for the Civil Service The Civil Service Code (opens in a new window) sets out the standards of behaviour expected of civil servants. We recruit by merit on the basis of fair and open competition, as outlined in the Civil Service Commission's recruitment principles (opens in a new window) . The Civil Service embraces diversity and promotes equal opportunities. As such, we run a Disability Confident Scheme (DCS) for candidates with disabilities who meet the minimum selection criteria. The Civil Service also offers a Redeployment Interview Scheme to civil servants who are at risk of redundancy, and who meet the minimum requirements for the advertised vacancy. Diversity and Inclusion The Civil Service is committed to attract, retain and invest in talent wherever it is found. To learn more please see the Civil Service People Plan (opens in a new window) and the Civil Service Diversity and Inclusion Strategy (opens in a new window) .

About the job Job summary Senior Dynamics Developer The IPO is a modern organisation which depends on its IT services to operate and innovate effectively. To provide up to date services to our customers systems need to be developed, improved, and maintained. This position plays a pivotal role in ensuring the core applications are reviewed and continually improved. You will need the appetite to learn new technologies and methodologies for delivering high quality IT services. In this role you will work within a multi-disciplined squad using several technologies to build enterprise grade services. You will be expected to be proactive and take accountability for the squad assigned deliveries. The role will also require the investigation, diagnosis and fix of any system issues. A Senior Developer is expected to contribute to the technical strategy for the department. As a multi-skilled individual specialising in MS Dynamics and Power Apps, you will have the opportunities to develop and mature skills in a core role but extend this to skills typically aligned to other role types. You will have a high level of input in defining which additional skills you can develop. This is a rolling recruitment exercise. Applications will be assessed at regular intervals against the published criteria. Selection decisions will be made on merit, following fair and open competition, in line with the Civil Service Commission's Recruitment Principles. We may appoint candidates as assessment stages are completed and may close the advert early or create a reserve list where sufficient candidates are identified. Working Style This role will be carried out in-line with IPO Hybrid working arrangements where staff are currently expected to spend at least 20% of their time working onsite from one of our offices. This role is based in our Newport Office . The requirement for attendance at an office location can vary by role so we would encourage candidates to discuss working arrangements with the recruiting manager to agree a reasonable balance between working from home and the office. Job description Main duties consist of but are not limited to: Technical • Be responsible for the design, coding, configuration, testing and documentation of large, complex or mission critical applications in a cloud first environment using Dynamics and Power Apps in MS Azure, • Configure and customise both model model-driven and canvas apps, • Develop Power Automate Flows via connectors to the Dataverse and other data sources, • Develop PowerApps integrations with other Azure components such as Logic Apps, Azure Service Bus and Azure Functions, • Work closely with test engineers to reach a common understanding of acceptance criteria, the code base and test coverage, • Work collaboratively with IT and stakeholders, share knowledge and expertise with your wider team, aspire to be a role model within the organisation, champion our culture of learning, development, cross-company collaboration and teamwork, • Proactively investigate problems and opportunities in existing processes, evaluating and communicating findings and recommendations to stakeholders, • Identify and manage defects, incidents, risks and issues in line with IPO standards, • Work within a multi-disciplinary team to deliver highly user focused and successful digital services ensuring governance standards are adhered to, • Assist in implementing toolkits and APIs for purposes such as integration, performance optimisation, security and scalability, • Keeping an open mind and exploring innovative ways to solve problems, working in a fail-fast fashion to provide required functionality, • Embrace a continuous improvement ethos, • Responsible for ensuring that the team test and build activities follow agreed governance and processes, • Proactively apply HMG IA technical security controls according to ISO 27001 & the Security Policy Framework (SPF) Behavioural • Understanding yourself to be a leader (and the impact of your behaviour on others in a project team focused on results), • Engaging Stakeholders (for mutually beneficial collaborative relationships outside of the team), • Share knowledge and expertise with your wider team, aspire to be a role model within the organisation, champion our culture of learning, development, cross-company collaboration and teamwork, • Work across several multi-disciplinary teams to deliver highly focused and successful digital services, • Provide project / delivery management support when required, • Effective management and delegation of tasks within the team, • Applies "progress over perfection" principle, • Takes full responsibility for decisions and delivers, • Inner composure, recovers quickly from setbacks and learns from the experience, • Highly driven & inspires others to move things along and make things happen Personal and Team Development • Drive your own training and self-development, keeping skills up to date and learning new skills, • Promote and display the IPO and Civil Service Values, • Guides more junior members in their personal development, • Coaches and mentors' colleagues, • Continuously improves technical knowledge and stays abreast of latest trends, • Shares knowledge of tools and techniques with your wider team and the business stakeholders Person specification Essential Experience • Has been a key player in delivering technical solutions as part of large projects, • Experienced with modern delivery models such as Scrum and other Agile methodologies, • Advocate of DevOps principles, • Experience working in a Microsoft Azure Cloud first team, • Experience with Azure DevOps Essential Technical • Experience of MS Dynamics CRM and PowerApps platform, • Has a deep understanding of architectural principals such as SOA and Micro-Services, • Technical aptitude, • Proficiency in one or more of these languages: C#, Python, JavaScript, Typescript, • Experience writing and implementing Unit Testing How to Apply Click the 'Apply now' button and complete the application form by providing the following: Your CV • Upload an anonymised copy of your current CV. Please remove all identifying markers such as name, title, education institution etc., • Make sure it clearly shows how you meet the essential criteria listed in the Person Specification. For further information on the sift and interview stages of this recruitment campaign, please head to our 'Things you need to know' section below. Please visit our Civil Service Careers page - IPO - Recruitment Support , Civil Service Careers (civil-service-careers.gov.uk) If you require job-specific information, please contact Dominic Read E-mail: Telephone: Behaviours We'll assess you against these behaviours during the selection process: • Developing Self and Others, • Delivering at Pace, • Working Together Benefits Alongside your salary of 47,766, Intellectual Property Office contributes 13,837 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides. • Unlimited Pluralsight video learning access, • Access to Microsoft's ESI training suite, • Hybrid working with no core hours, • Substantial support for career progression, • 25 days annual leave moving to 30 days in annual increments, • You will also get 8 days public leave and 1 day privilege leave For more information about what's on offer at the Intellectual Property Office please review our IPO benefit pack attached to the bottom of this advert. Please note that benefits may be subject to change. Things you need to know Artificial intelligence Artificial intelligence can be a useful tool to support your application, however, all examples and statements provided must be truthful, factually accurate and taken directly from your own experience. Where plagiarism has been identified (presenting the ideas and experiences of others, or generated by artificial intelligence, as your own) applications may be withdrawn and internal candidates may be subject to disciplinary action. Please see our candidate guidance (opens in a new window) for more information on appropriate and inappropriate use. Selection process details This vacancy is using Success Profiles (opens in a new window) , and will assess your Behaviours and Experience. Additional details on security and vetting Successful candidates must pass a disclosure and barring security check and if successful you must also hold, or be willing to obtain, a higher Security Clearance . For meaningful checks to be carried out individuals will need to have lived in the UK for a sufficient period of time, depending on the level of clearance, to enable appropriate checks to be carried out and produce a result which provides the required level of assurance. For this role the successful individual will need to have consistently lived in the UK for a minimum 5 years in order to meet the relevant security clearance. Further information on the vetting process can be found at National security vetting: clearance levels - GOV.UK If you have questions regarding this or are unsure if you meet the eligibility criteria, please contact Stage 1 - Sift An initial sift of applications will be carried out to create a shortlist. This will be based on the evidence provided for the following Success Profile elements: Experience Your CV will be used to assess your suitability for the role Stage 2 - Interviews If invited to interview Behaviours and Technical based questioning will be used. Please note candidates that proceed to the interview stage will be required to deliver a presentation against the Technical Success Profile. Further details will be provided in the invite to interview information. Specific information regarding the Success Profile elements that will be assessed at interview will be contained within the interview invitation. Interviews for this role will be carried out virtually via Microsoft Teams (video) This recruitment campaign will keep a reserve list for 12 months. If you meet the requirements for this role but aren't offered after passing the interview, you'll be placed on the reserve list. If a suitable position opens up during this time, we will reach out to individuals in merit order. Applicants to note: CVs sent direct to the IPO will not be accepted. There may be important information contained within the job role profile candidates may also wish to refer to. We recommend candidates download and save a copy of the role profile for reference. This post is being advertised to Internal , across Government and external candidates at the same time. Incomplete and/or late submissions will not be accepted or considered. Feedback will only be provided if you attend an interview or assessment. We do not routinely reimburse travel expenses for candidates, however if participating in the selection process would cause you undue financial hardship or if it restricts your ability to participate, please contact the recruitment team for more information. In line with Government guidance, successfully appointed candidates will need to provide documents for our Right to Work checks. Information on this will be sent within the invite to interview text. If you require a reasonable adjustment at any stage of the recruitment process, then please let the recruitment team know via; Please be aware that only one application per candidate is permitted for each recruitment campaign. Multiple applications, including those made using different accounts, may result in your application being withdrawn or rejected at any stage of the process. For more information on the IPO's terms and conditions, please review the attached IPO Modernised Terms and Conditions document attached at the bottom of this advert. Feedback will only be provided if you attend an interview or assessment. Security Successful candidates must undergo a criminal record check. Successful candidates must meet the security requirements before they can be appointed. The level of security needed is security check (opens in a new window) . See our vetting charter (opens in a new window) . People working with government assets must complete baseline personnel security standard (opens in new window) checks. Nationality requirements This job is broadly open to the following groups: • UK nationals, • nationals of the Republic of Ireland, • nationals of Commonwealth countries who have the right to work in the UK, • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities with settled or pre-settled status under the European Union Settlement Scheme (EUSS) (opens in a new window), • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities who have made a valid application for settled or pre-settled status under the European Union Settlement Scheme (EUSS), • individuals with limited leave to remain or indefinite leave to remain who were eligible to apply for EUSS on or before 31 December 2020, • Turkish nationals, and certain family members of Turkish nationals, who have accrued the right to work in the Civil Service Further information on nationality requirements (opens in a new window) Working for the Civil Service The Civil Service Code (opens in a new window) sets out the standards of behaviour expected of civil servants. We recruit by merit on the basis of fair and open competition, as outlined in the Civil Service Commission's recruitment principles (opens in a new window) . The Civil Service embraces diversity and promotes equal opportunities. As such, we run a Disability Confident Scheme (DCS) for candidates with disabilities who meet the minimum selection criteria. The Civil Service also offers a Redeployment Interview Scheme to civil servants who are at risk of redundancy, and who meet the minimum requirements for the advertised vacancy. Diversity and Inclusion The Civil Service is committed to attract, retain and invest in talent wherever it is found. To learn more please see the Civil Service People Plan (opens in a new window) and the Civil Service Diversity and Inclusion Strategy (opens in a new window) .

About the job Job summary Senior Interaction Designer The Intellectual Property Office (IPO) is seeking a senior interaction designer to contribute to its digital transformation. This role involves designing user-centred public services at scale within multidisciplinary teams , aligning with Government Design Principles . Key responsibilities include identifying and resolving complex public infrastructure issues, promoting best practices and standards in user centred design, and mentoring junior designers. The successful candidate will be proactive, take ownership of design activities (like facilitating critiques and documenting user journeys), and possess excellent leadership, collaboration, presentation, and communication skills to work effectively with various stakeholders. Find out more on our Design in Government blog . Working Style This role will be carried out in-line with IPO Hybrid working arrangements where staff are currently expected to spend at least 20% of their time working onsite from one of our offices. This role is based in our Newport Office . The requirement for attendance at an office location can vary by role so we would encourage candidates to discuss working arrangements with the recruiting manager to agree a reasonable balance between working from home and the office. Job description Main duties consist of but are not limited to: • Design and Develop User-Centred Services: Work in agile, multidisciplinary teams to rapidly develop design concepts for complex transformation programs, collaborating with service managers and programme directors. This includes actively participating in user research, creating prototypes, and designing user interactions across various channels, devices, and technologies, all while being able to justify design decisions with evidence and data., • Promote and Implement Design Excellence : Champion a consistent, high-quality user experience by promoting reusable design elements and best practices across the IPO and wider government communities. This involves contributing to user-centred design standards and guidance, utilising the GOV.UK Design System, and ensuring designs meet accessibility, legal, and security requirements, as well as the GOV.UK Service Standard., • Lead and Mentor Design Professionals: Provide management support, coaching, mentoring, and training to other designers (including HEO Interaction Designers), focusing on their development, the quality of their work, and ensuring adherence to best practices. Person specification Essential criteria • Experience working effectively in an agile, multi-disciplinary team environment, delivering iterative design components as part of a project team., • Experience in designing accessible solutions across various channels to meet customer needs. Proven ability to produce essential user-centred design deliverables, such as user flows, process flows, service blueprints, and site maps., • Proficient in using prototyping tools like GOV.UK Prototype Kit, Figma, or Adobe XD to create and validate high-fidelity prototypes., • Experience in conducting usability testing, either independently or collaboratively with user researchers., • Demonstrated experience working with the GOV.UK Design System, Service Manual, and design principles, including the ability to recommend new patterns or update existing ones within the system., • Experience in leading community of practice activities., • Proven ability to mentor and coach designers across the UCD profession. How to Apply Click the 'Apply now' button and complete the application form by providing the following: Your CV • Upload an anonymised copy of your current CV. Please remove all identifying markers such as name, title, education institution etc., • Make sure it clearly shows how you meet the essential criteria listed in the Person Specification. 750-word Personal Statement • Use this to explain why you're suitable for the role ., • Structure your statement around the essential criteria in the Person Specification., • Make sure to provide clear examples to show how you meet each requirement. For further information on the sift and interview stages of this recruitment campaign, please head to our 'Things you need to know' section below. Please visit our Civil Service Careers page - IPO - Recruitment Support , Civil Service Careers (civil-service-careers.gov.uk) If you require job-specific information, please contact Dominic Read E-mail: Telephone: Behaviours We'll assess you against these behaviours during the selection process: • Leadership, • Working Together, • Developing Self and Others, • Delivering at Pace Benefits Alongside your salary of 47,766, Intellectual Property Office contributes 13,837 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides. • Unlimited Pluralsight video learning access, • Access to Microsoft's ESI training suite, • Hybrid working with no core hours, • Substantial support for career progression, • 25 days annual leave moving to 30 days in annual increments, • You will also get 8 days public leave and 1 day privilege leave For more information about what's on offer at the Intellectual Property Office please review our IPO benefit pack attached to the bottom of this advert. Please note that benefits may be subject to change. Things you need to know Artificial intelligence Artificial intelligence can be a useful tool to support your application, however, all examples and statements provided must be truthful, factually accurate and taken directly from your own experience. Where plagiarism has been identified (presenting the ideas and experiences of others, or generated by artificial intelligence, as your own) applications may be withdrawn and internal candidates may be subject to disciplinary action. Please see our candidate guidance (opens in a new window) for more information on appropriate and inappropriate use. Selection process details This vacancy is using Success Profiles (opens in a new window) , and will assess your Behaviours and Experience. Additional details on security and vetting Successful candidates must pass a disclosure and barring security check and if successful you must also hold, or be willing to obtain, a higher Security Clearance . For meaningful checks to be carried out individuals will need to have lived in the UK for a sufficient period of time, depending on the level of clearance, to enable appropriate checks to be carried out and produce a result which provides the required level of assurance. For this role the successful individual will need to have consistently lived in the UK for a minimum 5 years in order to meet the relevant security clearance. Further information on the vetting process can be found at National security vetting: clearance levels - GOV.UK If you have questions regarding this or are unsure if you meet the eligibility criteria, please contact Stage 1 - Sift An initial sift of applications will be carried out to create a shortlist. This will be based on the evidence provided for the following Success Profile elements: Experience Your CV will be used to assess your suitability for the role and Your 750 word Personal statement will demonstrate your Experience against the listed person specification/essential criteria. Stage 2 - Interviews If invited to interview Behaviours and Experience based questioning will be used. Please note candidates that proceed to the interview stage will be required to deliver a presentation against the Ability And Behaviour Success Profile. Further details will be provided in the invite to interview information. Interviews for this role will be carried out in person at our Newport Office. This recruitment campaign will keep a reserve list for 12 months. If you meet the requirements for this role but aren't offered after passing the interview, you'll be placed on the reserve list. If a suitable position opens up during this time, we will reach out to individuals in merit order. Applicants to note: CVs sent direct to the IPO will not be accepted. There may be important information contained within the job role profile candidates may also wish to refer to. We recommend candidates download and save a copy of the role profile for reference. This post is being advertised to Internal , across Government and External candidates at the same time. Incomplete and/or late submissions will not be accepted or considered. Feedback will only be provided if you attend an interview or assessment. We do not routinely reimburse travel expenses for candidates, however if participating in the selection process would cause you undue financial hardship or if it restricts your ability to participate, please contact the recruitment team for more information. In line with Government guidance, successfully appointed candidates will need to provide documents for our Right to Work checks. Information on this will be sent within the invite to interview text. If you require a reasonable adjustment at any stage of the recruitment process, then please let the recruitment team know via; Please be aware that only one application per candidate is permitted for each recruitment campaign. Multiple applications, including those made using different accounts, may result in your application being withdrawn or rejected at any stage of the process. For more information on the IPO's terms and conditions, please review the attached IPO Modernised Terms and Conditions document attached at the bottom of this advert. Feedback will only be provided if you attend an interview or assessment. Security Successful candidates must undergo a criminal record check. Successful candidates must meet the security requirements before they can be appointed. The level of security needed is security check (opens in a new window) . See our vetting charter (opens in a new window) . People working with government assets must complete baseline personnel security standard (opens in new window) checks. Nationality requirements This job is broadly open to the following groups: • UK nationals, • nationals of the Republic of Ireland, • nationals of Commonwealth countries who have the right to work in the UK, • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities with settled or pre-settled status under the European Union Settlement Scheme (EUSS) (opens in a new window), • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities who have made a valid application for settled or pre-settled status under the European Union Settlement Scheme (EUSS), • individuals with limited leave to remain or indefinite leave to remain who were eligible to apply for EUSS on or before 31 December 2020, • Turkish nationals, and certain family members of Turkish nationals, who have accrued the right to work in the Civil Service Further information on nationality requirements (opens in a new window) Working for the Civil Service The Civil Service Code (opens in a new window) sets out the standards of behaviour expected of civil servants. We recruit by merit on the basis of fair and open competition, as outlined in the Civil Service Commission's recruitment principles (opens in a new window) . The Civil Service embraces diversity and promotes equal opportunities. As such, we run a Disability Confident Scheme (DCS) for candidates with disabilities who meet the minimum selection criteria. The Civil Service also offers a Redeployment Interview Scheme to civil servants who are at risk of redundancy, and who meet the minimum requirements for the advertised vacancy. Diversity and Inclusion The Civil Service is committed to attract, retain and invest in talent wherever it is found. To learn more please see the Civil Service People Plan (opens in a new window) and the Civil Service Diversity and Inclusion Strategy (opens in a new window) .

About the job Job summary Senior Data Engineer The IPO is a modern organisation which depends on its IT and Data services to operate and innovate effectively. In order to provide up to date services to our customers both nationally and internationally, our systems need to be developed, improved and maintained. As a Senior Data Engineer, situated within our Digital, Data and Technology (DDaT) Chief Data Office, you will work within a multi-functional delivery team, responsible for the delivery of the robust data services and designs. You will need the appetite to learn new technologies and methodologies for delivering high quality IT services. In this role you will work within a multi-disciplinary squad using several technologies to build enterprise grade services. Specific responsibilities for this role include the development of data systems as required, development and optimisation of ETL layers, maximising opportunities to re-use existing data flows and provide support in relation to data platforms and data integration within our cloud estate. Working Style This role will be carried out in-line with IPO Hybrid working arrangements where staff are currently expected to spend at least 20% of their time working onsite from one of our offices. This role is based in our Newport Office . The requirement for attendance at an office location can vary by role so we would encourage candidates to discuss working arrangements with the recruiting manager to agree a reasonable balance between working from home and the office. Job description Main duties consist of but are not limited to: • Be responsible for data enhancements and executing plans that utilise the current toolkit and the skills of the team to deliver these., • Contribute to the development of a world class Data Engineering capability for IPO IT & Data., • Work closely with our Data Management and Business Intelligence Teams to drive solutions that ensure ease of access to data and help them to work with data more effectively and efficiently., • Build IPO data pipelines, owning the data engineering artefacts., • Build solutions to move data internal & external to IPO., • Engage with stakeholders to build relationships and to gain a thorough understanding of key IPO user groups and design decisions., • Work across groups, projects, and products to implement data engineering solutions to solve complex business problems, using the IPO's chosen technology., • Support the vision for the organisation's use of data in line with corporate goals and vision. Person specification Essential Criteria Essential Technical • Experience of Azure Data Factory (ADF), Data Bricks, Python and other data tooling., • Evidence an ability to design, code, test, correct and document simple programs or scripts., • Experience of cleansing, preparing and formatting data sets., • Awareness of designing scalable solutions and future-proof data services. Essential Experience • Has been a key player in delivering technical solutions as part of large projects., • Experienced with modern delivery models such as Scrum and other Agile., • Advocate of DevOps principles., • Experience with Azure DevOps. How to Apply Click the 'Apply now' button and complete the application form by providing the following: Your CV • Upload an anonymised copy of your current CV. Please remove all identifying markers such as name, title, education institution etc., • Make sure it clearly shows how you meet the essential criteria listed in the Person Specification. For further information on the sift and interview stages of this recruitment campaign, please head to our 'Things you need to know' section below. Please visit our Civil Service Careers page - IPO - Recruitment Support , Civil Service Careers (civil-service-careers.gov.uk) If you require job-specific information, please contact Dominic Read E-mail: Telephone: Behaviours We'll assess you against these behaviours during the selection process: • Developing Self and Others, • Delivering at Pace, • Working Together Technical skills We'll assess you against these technical skills during the selection process: • Experience of Azure Data Factory (ADF), Data Bricks, Python and other data tooling, • Evidence an ability to design, code, test, correct and document simple programs or scripts., • Experience of cleansing, preparing and formatting data sets., • Awareness of designing scalable solutions and future-proof data services. Benefits Alongside your salary of 47,766, Intellectual Property Office contributes 13,837 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides. • Unlimited Pluralsight video learning access, • Access to Microsoft's ESI training suite, • Hybrid working with no core hours, • Substantial support for career progression, • 25 days annual leave moving to 30 days in annual increments, • You will also get 8 days public leave and 1 day privilege leave For more information about what's on offer at the Intellectual Property Office please review our IPO benefit pack attached to the bottom of this advert. Please note that benefits may be subject to change. Things you need to know Artificial intelligence Artificial intelligence can be a useful tool to support your application, however, all examples and statements provided must be truthful, factually accurate and taken directly from your own experience. Where plagiarism has been identified (presenting the ideas and experiences of others, or generated by artificial intelligence, as your own) applications may be withdrawn and internal candidates may be subject to disciplinary action. Please see our candidate guidance (opens in a new window) for more information on appropriate and inappropriate use. Selection process details This vacancy is using Success Profiles (opens in a new window) , and will assess your Behaviours, Experience and Technical skills. Additional details on security and vetting Successful candidates must pass a disclosure and barring security check and if successful you must also hold, or be willing to obtain, a higher Security Clearance . For meaningful checks to be carried out individuals will need to have lived in the UK for a sufficient period of time, depending on the level of clearance, to enable appropriate checks to be carried out and produce a result which provides the required level of assurance. For this role the successful individual will need to have consistently lived in the UK for a minimum 5 years in order to meet the relevant security clearance. Further information on the vetting process can be found at National security vetting: clearance levels - GOV.UK If you have questions regarding this or are unsure if you meet the eligibility criteria, please contact The assessment process will comprise of the following: Stage 1 - Sift An initial sift of applications will be carried out to create a shortlist. This will be based on the evidence provided for the following Success Profile elements: Experience Your CV will be used to assess your suitability for the role. We will refer to the technical skills and experience in the role profile. Stage 2 - Interviews If invited to interview Behaviours and Technical based questioning will be used. Specific information regarding the Success Profile elements that will be assessed at interview will be contained within the interview invitation. Interviews for this role will be carried out virtually via Microsoft Teams (video). This recruitment campaign will keep a reserve list for 12 months. If you meet the requirements for this role but aren't offered after passing the interview, you'll be placed on the reserve list. If a suitable position opens up during this time, we will reach out to individuals in merit order. Applicants to note: CVs sent direct to the IPO will not be accepted. There may be important information contained within the job role profile candidates may also wish to refer to. We recommend candidates download and save a copy of the role profile for reference. This post is being advertised to Internal , across Government and external candidates at the same time. Incomplete and/or late submissions will not be accepted or considered. Feedback will only be provided if you attend an interview or assessment. We do not routinely reimburse travel expenses for candidates, however if participating in the selection process would cause you undue financial hardship or if it restricts your ability to participate, please contact the recruitment team for more information. In line with Government guidance, successfully appointed candidates will need to provide documents for our Right to Work checks. Information on this will be sent within the invite to interview text. If you require a reasonable adjustment at any stage of the recruitment process, then please let the recruitment team know via; Please be aware that only one application per candidate is permitted for each recruitment campaign. Multiple applications, including those made using different accounts, may result in your application being withdrawn or rejected at any stage of the process. For more information on the IPO's terms and conditions, please review the attached IPO Modernised Terms and Conditions document attached at the bottom of this advert. Feedback will only be provided if you attend an interview or assessment. Security Successful candidates must undergo a criminal record check. Successful candidates must meet the security requirements before they can be appointed. The level of security needed is security check (opens in a new window) . See our vetting charter (opens in a new window) . People working with government assets must complete baseline personnel security standard (opens in new window) checks. Nationality requirements This job is broadly open to the following groups: • UK nationals, • nationals of the Republic of Ireland, • nationals of Commonwealth countries who have the right to work in the UK, • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities with settled or pre-settled status under the European Union Settlement Scheme (EUSS) (opens in a new window), • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities who have made a valid application for settled or pre-settled status under the European Union Settlement Scheme (EUSS), • individuals with limited leave to remain or indefinite leave to remain who were eligible to apply for EUSS on or before 31 December 2020, • Turkish nationals, and certain family members of Turkish nationals, who have accrued the right to work in the Civil Service Further information on nationality requirements (opens in a new window) Working for the Civil Service The Civil Service Code (opens in a new window) sets out the standards of behaviour expected of civil servants. We recruit by merit on the basis of fair and open competition, as outlined in the Civil Service Commission's recruitment principles (opens in a new window) . The Civil Service embraces diversity and promotes equal opportunities. As such, we run a Disability Confident Scheme (DCS) for candidates with disabilities who meet the minimum selection criteria. The Civil Service also offers a Redeployment Interview Scheme to civil servants who are at risk of redundancy, and who meet the minimum requirements for the advertised vacancy. Diversity and Inclusion The Civil Service is committed to attract, retain and invest in talent wherever it is found. To learn more please see the Civil Service People Plan (opens in a new window) and the Civil Service Diversity and Inclusion Strategy (opens in a new window) .

Principal-Education is seeking a Teacher of Design & Technology to inspire students with engaging and practical lessons. Applicants must hold Qualified Teacher Status (QTS) or equivalent, possess strong knowledge in Design & Technology and Engineering, and have a passion for hands-on learning.

This role involves working closely with a multi-disciplinary team, developing design and technical solutions, and supporting planning applications.

Principal Education in Hounslow seeks an enthusiastic and committed Teacher of Design & Technology to join their thriving school in September 2026.The role involves delivering high-quality teaching across Key Stages 3 and 4, with potential for Key Stage 5 based on experience.The ideal candidate will

Principal Education is looking for a passionate Engineering Teacher to join our forward-thinking Design & Technology faculty in Hounslow, England.

Part-Time DT Teacher Brentford (Starting September 2026) Prospero Teaching is seeking a passionate and dedicated Design & Technology (DT) Teacher for a secondary school in Brentford, starting September 2026. The school has a supportive and enthusiastic DT department, and is looking for a candidate with excellent subject knowledge who can deliver engaging and creative lessons. Contract Details Location: Brentford, Surrey Position: DT Teacher Contract Type: Permanent, Part-Time Start Date: September 2026 Hours: Part time (Days to be confirmed) Pay: Minimum GBP150 per day Experience, Training, and Qualifications QTS or equivalent Minimum of 1 year teaching experience in the UK Up-to-date Safeguarding training issued within the last year Eligibility Requirements To be considered for this role through Prospero Teaching, candidates must: Hold the right to work in the UK Hold an enhanced child barred list DBS certificate registered with the online update service, or be willing to process a new application Provide two professional child-related references covering the last 2 years Additional Information Prospero Teaching acts as an employment business/education recruitment agency for this vacancy. The successful candidate must complete all safeguarding and vetting checks with Prospero Teaching prior to starting. Benefits Accredited continued professional development courses, including safeguarding and behaviour management Access to in-house Training and Development Team

About the School We are a diverse, ambitious and inclusive secondary academy committed to delivering outstanding education for all learners. We benefit from a strong culture of collaboration, high expectations, and exceptional professional development opportunities. We are proud of our commitment to high academic standards, excellent behaviour, and a curriculum designed to equip students with the knowledge, skills and creativity needed for future success. Our Design & Technology department is a dynamic and practical environment where students develop hands-on skills and design thinking through engaging, real-world projects. The Role We are seeking an enthusiastic and skilled Teacher of Design & Technology, specialising in Resistant Materials, to join our department from September 2026. The successful candidate will deliver high-quality, engaging and practical lessons across Key Stage 3 and Key Stage 4, with a focus on design, manufacture, and material understanding. You will inspire students to develop creativity, precision, and technical skills through workshop-based learning and design projects. This is an exciting opportunity to contribute to a forward-thinking DT department with strong uptake at GCSE and a commitment to excellence in practical education. Key Responsibilities Teach Design & Technology with a specialism in Resistant Materials across KS3 and KS4 Deliver engaging, safe and well-structured practical and theoretical lessons Develop students’ skills in designing, modelling, and manufacturing products Ensure high standards of health and safety in workshops and practical environments Support students in using tools, machinery, and CAD/CAM software effectively Contribute to curriculum planning, resource development, and assessment Monitor, assess, and support student progress to achieve strong outcomes Contribute to enrichment activities such as STEM clubs, competitions, and showcases The Ideal Candidate Will Have Qualified Teacher Status (QTS) or equivalent Strong subject knowledge in Design & Technology, specifically Resistant Materials Experience teaching practical workshop-based DT at KS3 and KS4 Ability to teach design processes, material properties, and manufacturing techniques Confidence using CAD/CAM software and workshop equipment (desirable) Strong classroom management and commitment to safe practice A passion for hands-on, creative, and industry-relevant learning What We Offer A well-resourced and modern DT workshop environment A supportive and collaborative Design & Technology department Opportunities for professional development Engaged students who enjoy practical, hands-on learning Clear pathways for career progression and subject leadership opportunities

We are looking for an experienced enterprise network specialist with significant practical experience in network engineering, operations or infrastructure management, ideally at senior engineer, technical lead or manager level. You will bring strong hands-on capability in complex network infrastructure, including routing, switching, Ethernet fabric technologies, segmentation, perimeter security, VPN/remote access, monitoring and network resilience, alongside advanced firewall expertise; experience with Palo Alto Networks and/or Extreme Networks would be particularly valuable. You will be confident leading complex incidents, root-cause analysis and major changes in live environments, translating high-level requirements and diagrams into practical designs, service standards and well-governed delivery plans. Just as important, you will be a clear communicator and supportive manager who can lead, mentor and develop specialist engineers while building trusted relationships with IT colleagues, cyber security, suppliers and non-technical stakeholders. Experience of supplier management, technical contracts, procurement input, lifecycle planning and budget recommendations will help you succeed, as will a relevant professional qualification, certification or equivalent professional experience and a commitment to continuing professional development. We also welcome candidates who can bring experience of automation, telemetry, Zero Trust/SASE/ZTNA, disaster recovery or public-sector, charity, research, education or visitor-facing environments. As Network Manager at RBG Kew, you will play a pivotal role in keeping the digital foundations of our world-renowned science, collections, gardens and visitor operations secure, resilient and future-ready. Leading the Network Operations Team, you will be both a hands-on technical authority and an inspiring people manager, responsible for the design, operation and continual improvement of our enterprise network, perimeter security, VPN/remote access, monitoring and resilience services across a complex, multi-site and public-facing environment. This is a distinctive opportunity to shape services that support internationally important research, horticulture, public engagement and commercial activity, while helping Kew make the most of secure, reliable digital infrastructure. Interviews are due to take place on w/c 22 June. This role is based at Kew with the option of regular home working, subject to operational requirements. The Royal Botanic Gardens, Kew (RBG Kew) is a leading plant science institute, UNESCO World Heritage Site, and major visitor attraction. Our mission is to understand and protect plants and fungi for the well-being of people and the future of all life on Earth. We are working to end the unprecedented extinction crisis and to help create a world where nature is protected, valued by all and managed sustainably. We will achieve these goals by drawing on our leading scientific research, unrivalled collections of plants and fungi, global network of partners, inspirational gardens at Kew and Wakehurst, and our 260 years of history. Join us on our journey as protectors of the worlds plants and fungi. The salary for this position is £46,556 - £53,882 per annum [Band E] Our fantastic benefits package includes opportunities for continuous learning, a generous annual leave entitlement, flexible working to help you maintain a healthy work-life balance, an Employee Assistance Programme and other wellbeing support such as cycle to work scheme and discounted gym membership. We also offer a competitive pension, an employee discount scheme and free entry into a wide range of national museums and galleries, as well as access to our own beautiful gardens at Kew and Wakehurst. If you are interested in this position, please submit your application through the online portal, by clicking Apply for this job. At Kew, our strength lies in the diversity of our people and the insights they bring. When you join us, you will find an organisation that values your perspective and lived experience. You will receive support to achieve your full potential and access opportunities to develop and progress. Our commitment to equity, diversity, and inclusion is ongoing, shaped by the people who work here and the communities we serve. As a disability confident employer, we are breaking down barriers to be an inclusive workplace for everyone. No agencies please. TPBN1_UKTJ

Job Title: Head of Physical Education Start Date: September 2026 Contract Type: Full-time, Permanent Salary: MPS/UPS + TLR (dependent on experience) About the Role: We are seeking an ambitious and dynamic Head of Physical Education to lead a successful and well-established department from September 2026. This is an excellent opportunity for an experienced PE teacher or current middle leader ready to take the next step in their career. The successful candidate will provide strategic leadership for PE and school sport, promoting excellence in teaching and learning while fostering a culture of participation, teamwork, and high achievement across all key stages. Key Responsibilities: Lead, manage, and develop the PE department to ensure outstanding teaching and learning Design and implement a broad, balanced, and inclusive PE curriculum Drive high standards of student achievement and engagement in physical education Organise and oversee extracurricular sports programmes, fixtures, and events Monitor and evaluate departmental performance, implementing improvements where necessary Support and develop staff within the department through coaching and professional development The Ideal Candidate Will: Hold Qualified Teacher Status (QTS) or equivalent Have a proven track record of successful PE teaching across Key Stages 3–5 Demonstrate strong leadership and organisational skills Be passionate about sport, health, and student wellbeing Have experience in leading extracurricular activities and competitive school sport Be committed to safeguarding and promoting the welfare of young people What We Offer: A supportive and ambitious school environment Excellent facilities and a strong sporting tradition Opportunities for career progression within a high-performing school A commitment to staff development and wellbeing

Senior Building Surveyor - Join a Design and Specification-Focused Practice with Prestigious Clients An interdisciplinary construction consultancy based in Southwest London is seeking an experienced Senior Building Surveyor to join their close-knit team. Renowned for their impressive client portfolio, which includes Harrods and the Natural History Museum, this is a fantastic opportunity to work with high-profile clients while advancing your career. The Senior Building Surveyor Role As the Senior Building Surveyor, you will lead projects from inception to completion, managing an exciting and varied portfolio across retail, education, healthcare, and public sectors. With a strong focus on design and specification, you'll play a critical role in ensuring project excellence and client satisfaction. Key responsibilities include: Design and specification of new structures and renovations. Preparing specifications, obtaining tenders, and managing contract documents. Overseeing contract administration. Leading building surveying projects, ensuring compliance with regulatory standards and client expectations. Engaging with stakeholders, including clients, contractors, and regulatory authorities. The Ideal Senior Building Surveyor will have Qualifications: BSc/MSc in Building Surveying (ideally RICS-accredited). Experience: MRICS qualification or equivalent level of experience. Expertise: Well-rounded knowledge of professional and project services. Attributes: Strong client-facing skills and the ability to manage projects effectively. Desirable: Public sector project experience would be advantageous. In Return Salary: £55,000 - £65,000 Car allowance Structured bonus scheme Paid professional subscriptions Comprehensive health and wellbeing initiatives Generous holiday allowance plus additional days for length of service Latest tech, including laptop and phoneIf you're a Senior Building Surveyor ready to work on prestigious projects within a supportive and innovative practice, contact us today to explore this exceptional opportunity. Chris van Aurich - (phone number removed) Senior Building Surveyor | Associate Building Surveyor | Building Surveyor | Chartered Building Surveyor | Qualified Building Surveyor | Surveyor

Job Title: Design Technology Teacher – Resistant Materials Location: West London Start Date: 1 September 2026 Salary: £41,817 - £63,996 Contract: Permanent Are you an experienced Design Technology teacher specialising in Resistant Materials? Do you set high expectations for your students, supporting them to meet their full potential, across the full DT curriculum? Do you have confident classroom presence, consistently engaging students of all abilities and background in your lessons and with their assessments? New to our school network is an established and growing 11-18 academy in need of a qualified Design Technology (DT) Teacher to join them from September. In this role, you will teach across the DT curriculum at KS3 and KS4 with a specialist focus on Resistant Materials. ECTs with good experience in Resistant Materials are also encouraged to apply. Teachers and leaders at this large secondary school set high expectations for both staff and students, promoting academic excellence across all subjects and maintaining good behaviour. Though behaviour can be challenging, the school employs a clear behaviour policy with an emphasis on accountability and community. The school has a diverse student and staff population, building positive relationships based on empathy and respect. To be considered for this role, you will: Demonstrate excellent subject knowledge and confident classroom presence Hold QTS (Qualified Teacher Status) and have completed your ECT or NQT induction Have experience working in an 11-18 setting Foster positive relationships with your students, setting and maintaining high expectations Demonstrate high standards of professionalism Communicate clearly and confidently, verbally and in writing Hold UK Right to Work At TeacherActive, we understand the impact high quality teaching has on student outcomes. This is why we have a dedicated permanent recruitment team based in London to support qualified teachers match with the right schools and take the next step in their teaching careers. By engaging with TeacherActive for this role, you will gain: A dedicated permanent recruitment consultant offering individualised, expert support Access to a range of schools and roles across our London network Continuous professional development through our free online portal, to register your interest. Vacancy contact: (phone number removed) About TeacherActive TeacherActive is one of the UK’s leading education recruitment agencies, with over 20 years of experience supporting schools and education professionals. We place teachers and support staff into a wide range of temporary, contract and permanent roles, helping candidates find rewarding opportunities that suit their experience, availability and career goals. We pride ourselves on providing an excellent service to both our schools and candidates. Equal Opportunities Statement TeacherActive is an equal opportunities employer and operates as an Employment Business and Employment Agency in providing temporary, contract and permanent job seeking services. Safeguarding and DBS Compliance Registration may involve an enhanced DBS check, ID checks and the supply of good professional references, depending on the role. We are committed to safeguarding and compliance across all placements. Regular external audits have shown repeatedly that our standards are exceptional. We are passionate about finding the right staff for each education environment

External Site Manager I've been tasked to find an External Site Manager for a tier 1 main contractor on a freelance basis. It is to start ASAP and will finish in December 2027. The project is a based in South West London, it is a £50m new build school for the Department for Education (DFE). We will need you to look after packages such as substructure and superstructure; lifting, steel erection, precast planks install. You will be working alongside a Senior Project Manager to deliver the package. Requirements for External Site Manager SMSTS CSCS First Aid at Work Engineering experienceResponsibilities for the External Site Manager Attending and contributing in contractor prestart meetings. Attending and contributing in design team meetings. Chairing weekly sub-contractor progress meetings, taking and issuing meeting minutes. Attending safe starts. Approving RAMS. Attending DABS and contributing to the meeting, discussing coordination with other trades. If necessary taking the meeting, issuing the DABS report to all other team members. Enforcing H&S on site. Identifying potential problems, offering buildability solutions. Someone who is tech savvy. Someone who can engage with the supply chain and other team members.What is being offered Day rate between £(Apply online only) Temporary to permanent option Opportunity to work with a helpful site teamIf you want to hear more about this External Site Manager role please apply with an up-to-date copy of your CV or contact Danny Ireland in our London Office on (phone number removed)

Study Programme Support £27,216 pa (London) £23,261 pa (other locations) + benefits Term time (39 weeks) London, Rochdale, Halifax, Bradford, Manchester and Birmingham This role is being advertised as Education Support Officer, but internally your job title will be Programmes Support. Do you believe every young person deserves the right support, environment and encouragement to thrive? Are you passionate about working with neurodivergent learners with SEND and EHCPs, helping them build confidence, independence and positive futures? At Pinc College, we are creating inclusive, creative and supportive learning environments where every student is valued — and we are looking for dedicated Study Programme Support professionals to help us deliver that vision every day. About Pinc Pinc is an Independent Specialist College offering an inspiring and impactful approach to education and pathways into employment for neurodivergent young people, aged 16-24 years. Through creative study programmes based in galleries, museums and cultural venues across England and Wales, we help students develop confidence, skills and pathways into further education, higher education and meaningful careers. Our approach combines personalised learning, creativity, wellbeing and employability in environments designed to inspire ambition and possibility. We are recruiting Programmes Support roles across several Pinc College campuses and creative learning environments, including London, Rochdale, Halifax, Bradford, Manchester and Birmingham. As Study Programmes Support, you will play a vital role in the day-to-day running of a Pinc College campus, working closely with teachers, the Assistant Head of Programmes and the Head of Programmes to ensure students receive outstanding support. You will help create a safe, structured and inclusive learning environment where students can access learning, regulate emotions and make meaningful progress towards their goals. So, what else are we looking for? Experience supporting young people with SEND in education, youth work or similar settings Strong interpersonal skills with patience, empathy and resilience Good communication and organisational skills Ability to follow direction while working independently when required A positive, collaborative approach to team working Understanding of safeguarding responsibilities * Confidence using basic IT systems and Microsoft Office tools Our Campus clusters are as follows: Leeds Museum & Leeds Art Gallery (Leeds), Cartwright Hall & Dean Clough (Bradford & Halifax), Birmingham Museum & Art Gallery & Aston Hall (Birmingham), Touchstones, Salford Art Gallery, Bolton Museum (Greater Manchester), Manchester Museum, 22 Lever St, Manchester Craft & Design Centre (Central Manchester), Heritage Centre, The Potteries & Middleport (Macclesfield & Stoke), National Museum (Cardiff), Design Museum (London). To find out more about this unprecedented opportunity, including DBS and other requirements, apply now. Closing date: 7th June 2026

Design & Technology Teacher September start Excellent salaries Part time work pattern Ideal for a Design & Technology Teacher specialising in Food Technology Suitable for a Design & Technology ECT or experienced Design & Technology Teacher A Design & Technology Teacher is needed in a Mixed Secondary School & Sixth Form in South West London. This Design & Technology Teacher position will be part time and permanent. Teaching for this Design & Technology Teacher post will be for KS3 to KS4 classes, with a focus on Food Technology. The salary for this Design & Technology Teacher role will be between £40317 and £62496, depending on the qualifications and experience of each applicant. The School A 'Good' Mixed Academy, for pupils aged 11 to 18 years old, located in the London Borough of Wandsworth. There are currently just under 1700 pupils enrolled. Since 2001, the school has always been rated either 'Good' or 'Outstanding' by Ofsted. The school has links to the local football club and a number of notable former alumni include professional footballers. They have a support centre for deaf pupils and a resource base for pupils with Speech Language Communication Needs and Autism Spectrum Disorders. Requirements You're encouraged to apply if you're a recently qualified Design & Technology Teacher or an experienced Design & Technology Teacher. Applications are also welcome if you're a British trained Design & Technology Teacher or overseas trained Design & Technology Teacher. All applicants must have the following in order to be shortlisted for this Design & Technology Teacher position: Right to work in the UK UK QTS or an overseas equivalent Clear and up to date Enhanced DBS Experience as a Design & Technology Teacher in UK schools If you would like to be considered for this opportunity in education and training as a Design & Technology Teacher, then please apply via the link below and send your CV to Rahul at REESON Education as soon as possible. Reeson Education: Reeson Education is England's Premier Recruitment Agency. Established in 2006 by experienced teachers, education professionals and recruitment specialists, we have built our business and reputation on the cores values of honesty, integrity and excellence. We care about education and the provision of education and have established an excellent reputation with schools and teachers alike. Reeson Education is an Equal Opportunities employer and is committed to the highest standards of safeguarding and the promotion of the welfare of children, young people and adults. At Reeson Education we work closely with a large network of Nurseries, Primary Schools, Secondary Schools and Colleges across the UK. Our client base provides us with an abundance of available daily supply, long term and permanent opportunities across all age groups in all areas of England. Please note, where a salary or daily rate range is stated, the higher rate applies to candidates who meet the enhanced experience, training or qualification requirements specified within the advert

Structural Design Engineer £38k-£45k SW19 Do you have 1-4 years of buildings design experience? Would you be interested in joining a cutting edge civil & structural consultancy, based in modern offices a short walk from Wimbledon station? The firm is a medium sized practice, having around 20 staff. They work on the design of commercial, residential and education buildings, both new build construction and refurbishment. Their projects range in value, with an average of £10-15m, but can go up to £120m. You will be joining a well structured team, so will have the opportunity to gain mentorship and experience across a wide range of jobs. Excellent training for chartership will be provided. The office is a modern and pleasant environment in a sought after location close to shops, restaurants, tram and rail. Regular staff social events are arranged and they even have a BBQ area on the office balcony. Staff retention is excellent here. Benefits include 25 days annual Leave, pension, regular CPD sessions, training for Chartership, subsidised gym membership, cycle to work scheme and a bonus scheme. Sam Robson (phone number removed) Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Regional Sales Manager – Modular Buildings and Offsite Construction Job Title: Regional Sales Manager – Modular Buildings and Offsite Construction Industry Sector: Hire Industry, Construction Sales, Temporary and Permanent Modular Buildings, Portable Accommodation, Modular buildings, Modular Construction, Building Systems, Main Contractors, Steel Modules, Public Sector, Off-Site Construction, Modular Construction, Healthcare, Education, Commercial, Pharma and Infrastructure End Users Area to be covered: North London, Northern Home Counties & Anglia Postcodes: All North London postcodes + HA, WD, AL, EN, RM, SS, CM, SG, CO, CB, IP, NR & PE Attractive salary and commisson Benefits: £6,000 Car Allowance + Car option after probation period + comprehensive benefits The role of the Regional Sales Manager – Modular Buildings and Offsite Construction will involve: Field sales role selling high quality range of off-site pre-fabricated temporary and permanent modular buildings via hire and sales (currently 70% sales and 30% hire – although our client is looking to reverse this in the future) Typically (circa 70%) selling into healthcare, education, commercial pharma and infrastructure end users Approx. 30% of your time selling into and managing the tier one contractors/ main contractors Management responsibility for your own dedicated business development coordinator who will support all aspect of the sales function from an internal sales position as well as overseeing in house estimating and design teams Tasked with achieving circa £4m of sales revenue and £1m of rental turnover in your 2nd year Long term focus of this role will be to concentrate on rental projects Large projects sizes (sales from £1m-£10m) and hire from £6,000-£60,000 per week/ multiyear deals) Project currently 80% public sector, looking to grow private sector sales 50% of your time developing new business opportunities, 50% managing existing customer relationships and existing project bank London depot available for internal meetings as required The ideal applicant will be a Regional Sales Manager – Modular Buildings and Offsite Construction with: Proven track record of having sold into healthcare, education, commercial, pharma or infrastructure end users Experience and working relationships (ideally a network of contacts) within the tier one contractors/ main contractors Ideally from the construction hire/ rental industry Comfortable and capable of large project sales £1m+ Solution sales person Preferably some people management experience Specific knowledge of off-site pre-fabricated temporary and permanent modular buildings is not essential but may be advantageous Ideally a good mix of public and private sector field sales experience Ideally some expose to public s initiatives such as.: Building Schools for the Future, NHS trusts, school trusts etc. Technically capable, autonomous in nature Able to develop business strategies and think on your feet Hunger / appetite for new business Self-disciplined, exceptionally customer focussed The Company: Est. 50 Years+ Part of an Established Group £50m+ turnover * 150+ employees Mitchell Maguire is a specialist Construction Sales Recruitment Consultancy, dealing exclusively with Construction Sales Jobs, Construction sales vacancies and Specification sales positions within: Hire Industry, Construction Sales, Temporary and Permanent Modular Buildings, Portable Accommodation, Modular buildings, Modular Construction, Building Systems, Main Contractors, Steel Modules, Public Sector, Off-Site Construction, Modular construction and Healthcare, Education, Commercial Pharma and Infrastructure End Users

Are you an ambitious and enthusiastic Secondary Teacher looking for a new permanent role from September 2026? At Protocol Education, we are partnering with a range of thriving and well-respected secondary schools across Kingston-upon-Thames who are seeking talented teachers to join their teams on a permanent basis for the new academic year. We are currently recruiting teachers across a variety of subject areas, including: • English • Mathematics • Science • Humanities • Modern Foreign Languages • PE • Computer Science • Design & Technology • Business Studies • Art and Creative Subjects These opportunities are ideal for both experienced teachers and Early Career Teachers eager to develop within supportive and forward-thinking school environments. What the Schools Offer: • Permanent full-time teaching positions • September 2026 start dates • Supportive leadership teams and welcoming departments • Excellent CPD and career progression opportunities • Competitive salary packages in line with London pay scales The Successful Candidates Will: • Hold UK QTS or an equivalent recognised teaching qualification • Have experience teaching within secondary education • Be passionate about delivering high-quality lessons • Demonstrate strong classroom management and communication skills • Be committed to supporting students to achieve their full potential Why Register with Protocol Education? • Access to exclusive permanent vacancies across Kingston • Expert support throughout the application and interview process • CV guidance and interview preparation • Dedicated consultants with specialist education knowledge • A personalised and professional recruitment service If you are ready to take the next step in your teaching career and secure a permanent role for September 2026, we would love to hear from you. Protocol Education is committed to safeguarding and promoting the welfare of children and young people. All appointments will be subject to enhanced DBS and compliance checks. All applicants will require the appropriate qualifications and training for this role. Please see the FAQs on the Protocol Education website for further details. All pay rates quoted will be inclusive of 12.07% statutory holiday pay. This advert is for a temporary position. In some cases, the option to make this role permanent may become available at a later date. Protocol Education is committed to safeguarding and promoting the welfare of children. We undertake safeguarding checks on all workers in accordance with the DfE statutory guidance ‘Keeping Children Safe in Education’, this may also include an online search as part of our due diligence on shortlisted applicants. We offer FREE online safeguarding and Prevent Duty training to all our workers. All candidates must undertake or have undertaken a valid enhanced Disclosure and Barring Service (DBS) check and subscribe to the DBS Update Service. Full assistance provided. For details of our privacy policy, please see visit the Protocol Education website

About the School We are a thriving and ambitious all-boys secondary school with a strong tradition of academic achievement, character development, and excellence in technical and vocational education. We are proud of our inclusive ethos, high standards of behaviour, and commitment to preparing students for future study and employment. Our DT and Engineering department plays a central role in the school’s curriculum, offering students hands-on, creative, and industry-relevant learning experiences across product design, engineering principles, CAD/CAM, electronics, and resistant materials. The Role We are seeking an enthusiastic, innovative, and committed Teacher of Design & Technology (with Engineering specialism desirable) to join our successful department from September 2026. You will be responsible for delivering high-quality teaching across Key Stages 3 and 4, with the potential to teach Key Stage 5 depending on experience and subject expertise. The successful candidate will inspire students through practical, engaging lessons that develop creativity, problem-solving, and technical understanding. Key Responsibilities Teach DT and Engineering across KS3 and KS4 (KS5 desirable) Deliver engaging, practical and theory-based lessons in line with the national curriculum Contribute to the development of the Engineering and DT curriculum Maintain high standards of health and safety in workshops and labs Support students in developing practical skills using tools, machinery, CAD software, and design processes Monitor, assess, and report on student progress effectively Contribute to extracurricular activities such as STEM clubs, competitions, and enrichment opportunities The Ideal Candidate Will Have Qualified Teacher Status (QTS) or equivalent Strong subject knowledge in Design & Technology and/or Engineering Ability to teach resistant materials, product design, and engineering principles Experience using CAD/CAM software and workshop machinery (desirable) A passion for practical, hands-on learning and student achievement Strong classroom management and communication skills Commitment to safeguarding and student wellbeing What We Offer A supportive and well-resourced DT/Engineering department Access to modern workshops and specialist equipment Opportunities for professional development and career progression A collaborative and forward-thinking staff team Motivated students who are eager to learn and succeed

Project Manager If you're a Project Manager who knows their way around fit out projects and enjoys managing multiple schemes at once, this one's worth a look. You'll be overseeing a range of education projects across West London and Berkshire, with values ranging from £500k - £5m - giving you a varied workload and the chance to properly take ownership from pre-construction through to delivery. About the role of Project Manager This freelance role focuses on managing multiple smaller education fit out schemes across the West London and Berkshire region. The projects will range between £500k - £5m and will involve both traditional and D&B fit out works. You'll need to be comfortable operating across both pre-construction and delivery phases, working closely with clients, consultants, subcontractors, and internal teams to ensure projects are planned properly and delivered smoothly. It's a role for someone organised, commercially aware, and confident managing multiple live projects simultaneously while maintaining strong communication throughout. Responsibilities for Project Manager Manage multiple education fit out projects from pre-construction through to completion Coordinate design, programme, procurement, and delivery across several live schemes Manage subcontractors and site teams to ensure projects are delivered safely, on time, and within budget Liaise with clients, consultants, and stakeholders throughout all stages of the project lifecycle * Oversee both traditional and D&B fit out schemes across the region Requirements for Project Manager SMSTS CSCS Card First Aid at Work Previous experience managing fit out projects within either traditional or D&B environments Strong understanding of both pre-construction and project delivery phases Experience delivering education projects would be advantageous About the company You'll be joining a well-established contractor with a strong pipeline of fit out work across London and the South East, delivering projects across the education sector with a focus on quality and repeat business. What we offer for Project Manager Competitive freelance day rate Ongoing pipeline of education fit out projects across West London & Berkshire Long-term freelance opportunity with consistent work Supportive team and opportunity to work across a varied portfolio of schemes Call to action If you want to hear more about this Project Manager role, apply with your CV or get in touch with Dylan Russell in our London office on (phone number removed) or (url removed)

Marketing Automation Specialist £20.51p/h-£23.08p/h| Brentford / Chiswick | Hybrid (2 days office) | Immediate start EdTech organisation supporting pre-K-12 education is looking for a Marketing Automation Specialist to join on a temporary basis. This is a hands-on role focused on Marketo campaign execution, email marketing operations and data quality within the marketing function. What you'll do Build, test and deploy campaigns in Marketo Maintain and expand email campaigns (newsletters, webinars, regional activity and follow-ups) Design and update email templates using Knak or HTML/CSS Report on campaign performance, trends and engagement metrics Manage database health, segmentation and lead flow Support campaign execution, inbound requests and deployment scheduling Work with internal teams and regional marketers on campaign delivery Support data clean-up, QA and CRM/marketing system integrationsExperience required: 3+ years' experience in marketing operations or email marketing Strong hands-on experience with Marketo (essential) Experience with email build tools (Knak preferred) Understanding of CRM, automation and campaign tracking Strong attention to detail and data accuracy Able to manage multiple priorities in a fast-paced environmentKey details Temporary assignment (3-6 months initially, potential extension or perm) Immediate start required Office-based in Brentford / Chiswick (2 days per week) £20.51p/h-£23.08p/hHuntress Search Ltd acts as a Recruitment Agency in relation to all Permanent roles and as a Recruitment Business in relation to all Temporary roles. We practice a diverse and inclusive recruitment process that ensures equal opportunity for all we work with, irrespective of race, sexual orientation, mental or physical disability, age or gender. As an organisation, we encourage applications from all backgrounds and will ensure measures are met when required, to allow a fair process throughout. PLEASE NOTE: We can only consider applications from candidates who have the right to work in the UK

Start your Construction career with Thames Water. Kick‑start your future as a Construction Assurance Apprentice, supporting the UK’s largest water and wastewater provider. You’ll support projects through design, build, commissioning, and aftercare—helping integrate new assets smoothly into day‑to‑day operations. What you’ll do as a Construction Assurance Level 4 Apprentice Support construction assurance to meet time, cost, and quality targets. Assist with pre‑construction reviews and readiness checks. Monitor contractor safety, environmental compliance, and asset standards. Help resolve site issues, non‑conformances, and deviations. Work with Operations Readiness teams to ensure smooth asset integration. Help prepare and review RAMS, TWOSAS, and permits. Take part in audits and performance reviews, driving improvement. Support planning, lookahead meetings, commissioning, and aftercare. Where you will work: Location: Hampton, TW12 2ES Hours: 36 hours a week across four working days plus one off-the-job training day, Start date: September 2026 Training and qualification: You’ll study with the University of Built Environment, one of the UK’s leading training providers. Your training includes virtual sessions each week, as well as live seminars and recordings; tasks and learning resources are set on the VLE. Qualification: Level 4 Construction Site Supervisor Standard- Certificate of Higher Education Construction & Built Environment Duration: Permanent contract with a 42-month structured programme What you should bring to the role: GCSE Maths and English (grade 9-4 / A-C) 64 UCAS tariff points or equivalent A full UK driver's licence is required as you'll be travelling across Thames Water sites. If you use your own vehicle for travel, you'll need to have business insurance Strong time management and organisation skills Passionate about learning and aligned with Thames Water’s goals for the future What’s in it for you? Starting salary of £22,500 per annum Annual Leave: 24 days holiday per year, increasing to 28 with the length of service (plus bank holidays) Performance-related pay plan directly linked to company performance measures and targets Generous Pension Scheme through AON Access to lots of benefits to help you take care of you and your family’s health and wellbeing, and your finances – from annual health MOTs and access to physiotherapy and counselling, to Cycle to Work schemes, shopping vouchers and life assurance. Find out more about our benefits and perks (Please note different T&Cs apply if on secondment) Who are we? We’re the UK’s largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It’s a big job, and we’ve got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to come. Learn more about our purpose and values Working at Thames Water Thames Water is a unique, rewarding, and diverse place to work, where every day you can make a difference, yet no two days are the same. As part of our family, you’ll enjoy meaningful career opportunities, flexible working arrangements and excellent benefits. If you’re looking for a sustainable and successful career where you can make a daily difference to millions of people’s lives while helping to protect the world of water for future generations, we’ll be here to support you every step of the way. Together, we can build a better future for our customers, our region, and our planet. Real purpose, real support, real opportunities. Come and join the Thames Water family. Why choose us? Learn more. We’re committed to being a great, diverse, and inclusive place to work. We welcome applications from everyone and want to ensure you feel supported throughout the recruitment process. If you need any adjustments, whether that’s extra time, accessible formats, or anything else, just let us know, we’re here to help and support. When a crisis happens, we all rally around to support our customers. As part of Team Thames, you’ll have the opportunity to sign up to support our customers on the frontline as an ambassador. Full training will be given for what is undoubtedly an incredibly rewarding experience. It’s also a great opportunity to learn more about our business and meet colleagues. Disclaimer: Due to the high volume of applications we receive, we may close the advert earlier than the advertised date, so we encourage you to apply as soon as possible to avoid disappointment

Art Teacher Location: Richmond Salary: M1-M6 (Main Pay Scale) Contract: Permanent ECTs Welcome to Apply We are working with a highly regarded, inclusive secondary school located in the Richmond area, seeking to appoint an enthusiastic and dedicated Art Teacher to join their creative faculty. This is a well-established, fully inclusive Anglican school that welcomes students from all faiths and backgrounds and has an excellent reputation within the local community. The school is guided by a strong ethos of care, respect, and high expectations, which underpins both academic success and outstanding personal development. The Department The Art & Design Technology faculty is a well-resourced and collaborative department, covering Art, Textiles, Graphics, Product Design, Food Preparation and Nutrition, and Design Technology. The department delivers a broad, creative, and practical curriculum across Key Stages 3 and 4, with opportunities at A Level depending on experience. The Role The school is seeking a passionate and creative Art Teacher to join their forward-thinking department. This is an excellent opportunity to inspire students and make a real impact on their creative development within a supportive and well-structured environment. • Plan and deliver engaging and imaginative Art lessons across KS3 and KS4 (A Level available depending on experience) Develop pupils' creativity, technical skills, and confidence across a range of media and processes Encourage experimentation, independent thinking, and high-quality artistic outcomes Use assessment effectively to track progress and provide meaningful feedback Contribute to curriculum development and enrichment opportunities across the faculty Promote positive behaviour, high expectations, and pride in student work Support the wider ethos of inclusion, wellbeing, and academic excellence Person Specification The ideal candidate will: • Hold Qualified Teacher Status (QTS) and be able to teach Art at secondary level Have strong subject knowledge and a genuine passion for Art and creative education Be confident in classroom management and pupil engagement Demonstrate commitment to inclusive practice and supporting learners of all abilities Be a collaborative team player with a proactive approach to departmental development * Be open to professional development and ECT mentoring support where applicable Why Apply? • Work in a highly inclusive and supportive secondary school environment Join a creative and well-resourced Art & Design Technology faculty Benefit from excellent CPD and structured ECT mentoring support Be part of a strong staff wellbeing culture with regular social activities Enjoy excellent transport links and free staff parking * Teach motivated students within a school that values both creativity and achievement

AKT IIs outstanding reputation, stability and growth has attracted the very best professionals with the promise of progressing and expanding their careers. This continued growth has led to the expansion of the company into key geographies across the globe: Cambridge, Manchester and Bristol in the UK, as well as Copenhagen and Toronto internationally. The position. We are currently looking for a highly motivated Design Engineer, responsible for specialist structural engineering design projects from inception to practical completion across all sectors (including workplace, residential, life science, education, retail, hotels, hospitality, sports and leisure). At AKTII you will gain the opportunity to work on some of the most interesting and complex buildings around the world with current complete projects in over 50 countries. The role requires producing detailed design to meet with design and construction programmes, liaising with other disciplines and ensuring the coordination of design and detailing work appropriate to the project. The role and responsibilities. As a Design Engineer your responsibilities include, but are not limited to the following: Carrying out structural surveys of building/desk studies and providing initial advice on any issues that may arise Preparing conceptual and outline designs for structural schemes with support of the wider team Preparing detailed design calculations to Eurocode and relevant design guidance notes using relevant 3D software packages Preparing detailed design drawings and specifications for tender purposes Responding to client requests for information Supporting the production of construction information for issue to contractors Visiting sites during the construction phase to monitor progress and provide advice to contractors Day-to-day support to colleagues from other disciplines within the office Attending team meetings with both internal and external disciplines Required skills. Experience of structural design in concrete, steel and timber structures, as well as experience in other structural materials Experience of working with Eurocode and other local design guidance Knowledge and interest in sustainable design and embodied carbon evaluation A strong analytical knowledge and understanding of engineering principles, combined with practical understanding of buildings and construction A desire to work constructively in a team, finding holistic building design solutions A good understanding of multidisciplinary requirements into coordinated solutions Good communication and interpersonal skills Computer literate with knowledge of design and analysis programmes Understanding of the health & safety regulations and designers responsibilities Qualifications and experience. A good degree in Engineering Experience, competency and flexibility to rise to challenging situations and take on responsibility appropriate to their capability What's in it for you? The chance to work for an innovative, design-led studio based in Cambridge with the opportunity to work on some of the very best projects across UK, Europe and internationally , plus a friendly, dedicated team and a competitive salary. Youll receive AKT IIs many employee benefits including a vibrant social calendar, with many company-funded events and activities. TPBN1_UKTJ

Structural Design Engineer £38k-£45k SW19 Do you have 1-4 years of buildings design experience? Would you be interested in joining a cutting edge civil & structural consultancy, based in modern offices a short walk from Wimbledon station? The firm is a medium sized practice, having around 20 staff. They work on the design of commercial, residential and education buildings, both new build construction and refurbishment. Their projects range in value, with an average of £10-15m, but can go up to £120m. You will be joining a well structured team, so will have the opportunity to gain mentorship and experience across a wide range of jobs. Excellent training for chartership will be provided. The office is a modern and pleasant environment in a sought after location close to shops, restaurants, tram and rail. Regular staff social events are arranged and they even have a BBQ area on the office balcony. Staff retention is excellent here. Benefits include 25 days annual Leave, pension, regular CPD sessions, training for Chartership, subsidised gym membership, cycle to work scheme and a bonus scheme. Sam Robson 07749 155538 Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. TPBN1_UKTJ

Shape the Engineers of Tomorrow We are seeking a passionate, creative, and dedicated Engineering Teacher to join our ambitious and forward-thinking Design & Technology faculty. This is an exciting opportunity to inspire students through practical, innovative, and industry-relevant learning experiences. We are looking for an enthusiastic teacher who can deliver engaging Engineering lessons across Key Stages 3–5 and help students develop the technical knowledge, problem-solving skills, and creativity needed for future careers in engineering and technology. About the Role As an Engineering Teacher, you will: Plan and deliver high-quality Engineering and Design Technology lessons Inspire students through practical and project-based learning Develop students’ technical understanding, creativity, and analytical skills Contribute to curriculum development and enrichment opportunities Maintain high expectations for behaviour, progress, and achievement Support students in achieving excellent academic and vocational outcomes The Ideal Candidate Will Have: Qualified Teacher Status (QTS) or equivalent A degree or strong background in Engineering, Design Technology, or a related field Experience teaching Engineering or DT at secondary level Excellent classroom management and communication skills A commitment to inclusive education and student success The ability to motivate and inspire young people Why Join Us? We pride ourselves on creating a supportive and aspirational learning environment where both students and staff thrive. We offer: A collaborative and welcoming staff team High-quality professional development and career progression opportunities Well-equipped specialist facilities A strong focus on innovation and STEM education A culture that values wellbeing, diversity, and ambition

We are seeking an experienced and proactive Workshop Manager to lead the day-to-day operation of our Mechanical and Electronics Workshop, ensuring it operates safely, efficiently and to the highest technical standards. In this varied and hands-on role, you will supervise and develop a skilled team of technicians, manage workshop facilities, equipment and budgets, and act as a key technical partner across research, teaching and enterprise activities. You will oversee the design, prototyping and manufacture of bespoke experimental rigs, instrumentation and test systems, while providing expert advice on materials, manufacturing methods, electronic integration and commissioning. The role also involves managing supplier relationships, evaluating outsourcing opportunities, developing cost-recovery processes, and driving continuous improvement across workshop operations and services. We are looking for a qualified engineering professional with significant experience managing a technical or engineering workshop environment, ideally within research or higher education industry. You will bring strong leadership skills, practical fabrication and problem-solving expertise, and the ability to balance hands-on technical support with operational and administrative responsibilities. Applicants should have experience in project costing, workshop safety and compliance, and the use of CAD/CAM and engineering design tools such as SolidWorks or Fusion 360. Experience with CNC machining, 3D printing, supplier management or internal charging models would be advantageous. Above all, you will be an organised and collaborative professional who is passionate about delivering high-quality technical support and fostering a positive, inclusive and safety-focused working environment

AKT II is a progressive design-led AEC consultancy which, over recent years, has been recognised as one of the most successful cutting-edge practices in its field, collaborating with architects, developers and contractors both in the UK and internationally. AKT II was formed in 1996 and since then has grown to 350 people, while building a reputation for award-winning innovation, creativity and delivery. The position. Responsible for specialist structural engineering design projects from inception to practical completion in commercial, health, retail, industrial, education, hotels, leisure and other specialist sectors. At AKT II you will gain the opportunity to work on some of the most interesting and complex buildings around the world with current complete projects in over 40 countries. The role requires attendance at project meetings, liaising with other disciplines and producing a detailed design and specification to meet with design and construction programmes, and ensuring the co-ordination of design and detailing work appropriate to the project. It also requires contribution to internal management of projects and associated resourcing appropriate to experience and capability. The role and responsibilities. Reporting to Associate / Associate Director, as a senior engineer responsibilities shall include, but shall not be limited to the following: Carrying out structural surveys of building / desk studys and providing initial advice on any issues that may arise Preparation of detailed design calculations to British Standards, Eurocodes and relevant design guidance notes using relevant 3D software packages Interpreting the Client brief and assist in preparing designs at all stages from scheme through to detail Acting independently to investigate solutions, you will explore options, work closely with partners and peers alike in order to develop and communicate design solutions Preparation of detailed design drawings and specifications for Tender purposes Responding to Client requests for information Attendance at Design Team meetings with Clients, other design collaborators and communicate design ideas through sketches, models and presentations Assist in the production of Construction information for issue to Contractors Visiting sites during the Construction phase to monitor progress and provide advice to Contractors Co-ordinate design information with Engineers of other disciplines With the support of the Team Leader, provide technical guidance and mentoring to junior members of the team Where appropriate, facilitate and organise meetings and CPD training events to contribute to your own development and the development of others Support and participate in AKT IIs Technical agenda Day-to-day support to colleagues from other disciplines within the office Attend team meetings with both internal and external disciplines Required skills. Sound knowledge of structural design in concrete and steel structures, as well as experience in other structural materials. Experience of working with Eurocodes and British Standards A strong analytical knowledge and understanding of engineering principles, combined with practical understanding of buildings and construction The ability to design and deliver structural solutions on major and/or complex projects Aptitude to work on your own initiative and be proactive A desire to work constructively in a team, finding holistic building design solutions A good understanding of multidisciplinary requirements into coordinated solutions Inquisitive, creative, solution-orientated designer. You will be a collaborative, persuasive and engaging individual who gives their all to ensure the client is happy and that the solution is high-quality and practical Excellent planning, organisational and time management skills, with the ability to balance tasks and prioritise to meet strict deadlines Sound communication and interpersonal skills Computer literate with knowledge of design and analysis programmes Understanding of the CDM Regulations and designers responsibilities Qualifications. A good degree in Engineering Experienced Chartered Engineer (either IStructE or ICE or equivalent), recently Chartered or near-chartered The ideal applicant will be able to demonstrate their experience, competency and flexibility to rise to challenging situations and take on responsibility appropriate to their capability What's in it for you? The chance to work for an innovative, design-led company based in Cambridge plus a friendly, dedicated team and a competitive salary. Youll receive AKT IIs many employee benefits including a vibrant social calendar, with many company-funded events and activities. TPBN1_UKTJ

Permanent, 36 hours a week over 40 weeks a year term time only - £32,792 - £35,172 per annum Permanent, 18 hours a week over 38 weeks a year term time only - £15,576 - £16,706 per annum The Counselling and Wellbeing Advisor plays a vital role in supporting and promoting student mental health across the College. Delivering individual and group counselling, workshops and drop-in services, you will work closely with Student Services to provide a holistic, student-centred approach to wellbeing. In this role, you will deliver one-to-one counselling sessions and on occasion, be involved in group delivery, workshops and drop-in support focused on key wellbeing themes. You will maintain accurate and confidential records in line with professional and ethical standards, undertake risk assessments, and respond appropriately to safeguarding concerns. Working collaboratively with internal teams and external agencies, you will ensure students receive the right support, while effectively managing a counselling caseload alongside administrative responsibilities and engaging in continuous professional development. You will contribute to the wider Student Services wellbeing offer by supporting and delivering college-wide wellbeing events and activities. This includes helping to design and facilitate initiatives that promote positive mental health across the student population, as well as delivering wellbeing-focused induction sessions to groups of new students. This will also include creating promotional material and resources and the sharing and dissemination of these via platforms such as Teams and SharePoint. We are seeking a qualified professional with a minimum Level 4 Diploma or Foundation Degree in Counselling, supported by evidence of CPD, or a Level 5 Diploma in Counselling Children and Young People (CYP). You will have at least 200 hours of counselling practice, including a minimum of 50 hours working with children and young people aged 418 if your core training is adult-focused. You will be a registered member of a recognised professional body such as BACP, UKCP or NCPS, and have experience delivering both individual and group counselling sessions. You will have experience working with clients presenting with complex and multiple mental health needs, ideally within educational settings or relevant environments such as CAMHS or NHS services. You will also be skilled in assessing client suitability for counselling, making appropriate referrals to external services, and hold strong communication and interpersonal skills to engage with students, staff and parents. Closing date for the return of a complete online application is 15th June 2026 The benefits package includes generous annual leave of 27 days plus up to 8 additional days over Christmas/New Year as well as an additional 5 days Wellbeing leave to enhance employees physical and mental health. There is an excellent pension scheme that receives a significant financial contribution from the employer (Teachers Pensions or Local Government Pension Scheme), subsidised sports facilities and professional development and training plus a salary sacrifice cycle to work scheme . The benefits package is pro rated for part time staff. As part of our due diligence checks on prospective employees, successful candidates will be subject to an enhanced DBS check, satisfactory references, an online search and proof of eligibility to work in the UK. As outlined in the Public Sector Equality Duty of the Equality Act 2010, we are committed to equality of opportunity for all staff and applications from individuals are encouraged regardless of age, disability, sex, gender reassignment, sexual orientation, pregnancy and maternity, race, religion or belief and marriage and civil partnerships. The South Thames Colleges Group is made up of Carshalton College, Kingston College, Merton College and South Thames College, which merged on 1 August 2017. South Thames Colleges Group is one of Londons largest providers of post-16 education and training and is an ongoing and significant contributor to its local communities. We aim to put students success at the heart of everything we do. We are looking for hard-working and collaborative people who can join our team and help challenge our students to achieve and progress. When you click on Apply, you will be forwarded to the application page which sits on a platform hosted by an external partner called Blue Octopus who support STCG throughout the recruitment process. TPBN1_UKTJ

Graduate Manufacturing & Production Engineer A fantastic opportunity for a graduate engineer to develop a career in production engineering, manufacturing processes, CAD, lean manufacturing, continuous improvement, production troubleshooting, jigs and fixtures, and data analysis. If you’ve also worked in the following roles, we’d also like to hear from you: Graduate Mechanical Engineer, Process Improvement Engineer, Continuous Improvement Engineer, Junior Manufacturing Engineer SALARY: Competitive + Benefits LOCATION: Isleworth, West London JOB TYPE: Full-Time, Permanent WORKING HOURS: 7:30am – 17:00pm (Monday – Thursday) 07:30am – 12:30pm (Friday) JOB OVERVIEW We have a fantastic new job opportunity for a Graduate Manufacturing & Production Engineer to join an engineering team within a dynamic manufacturing company. This role is officially known within the organisation as a Graduate Production & Process Improvement Engineer As the Graduate Manufacturing & Production Engineer you will support production processes, manufacturing documentation, CAD design, lean manufacturing, continuous improvement and data analysis across materials including metals, plastics, foams, plywood and textiles. The Graduate Manufacturing & Production Engineer role will suit a proactive graduate with strong problem-solving skills who wants hands-on exposure to production troubleshooting, project engineering, jigs and fixtures, process improvement and manufacturing operations. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Graduate Manufacturing & Production Engineer include: • Continuous Improvement: Plan, implement and manage improvement initiatives from concept through to completion, supporting efficiency, productivity, quality and cost reduction, • Manufacturing Documentation: Create, update and maintain work instructions, SOPs, visual aids and training materials for production and assembly processes, • Lean Manufacturing: Support 5S and other lean manufacturing activities, contributing to the optimisation of production planning and operational performance, • Production Troubleshooting: Investigate and resolve production-related technical issues in real time alongside production operatives, • Technical Support: Provide hands-on support with machine and tool set-ups, adjustments and operational guidance to minimise downtime, • Jigs and Fixtures: Collaborate with production teams to develop concepts for jigs, fixtures and manufacturing aids, taking responsibility for detailed design and implementation, • Data Collection: Collect, monitor, analyse and report production data to identify trends and support data-driven improvements, • Innovation: Keep up to date with industry trends, emerging technologies and best practice, sharing insights that support business improvement CANDIDATE REQUIREMENTS ESSENTIAL • Education: A bachelor’s degree in mechanical engineering, industrial engineering, manufacturing engineering or a related field, • Problem Solving: Strong problem-solving skills with the ability to think creatively and develop practical solutions, • Project Management: Ability to manage projects independently, take initiative and proactively address potential issues, • Teamwork and Communication: Able to collaborate with colleagues across the organisation, share ideas clearly and apply feedback positively, • CAD Software: Experience with computer aided design software such as SolidWorks, Inventor, Creo or a similar tool, • Microsoft Office: Strong proficiency in Microsoft Office applications, including Excel, Word and PowerPoint DESIRABLE • Manufacturing Knowledge: Understanding of lean manufacturing concepts and continuous improvement tools, • Programming: Working knowledge of Python or a similar programming language to assist with in-house software development, • Analytical Skills: Ability to analyse production data, identify trends and make informed, data-driven decisions, • Work Experience: Previous experience in a professional workplace, preferably within manufacturing or engineering, • ERP Systems: Experience using manufacturing ERP systems BENEFITS • On-the-job training and support, • Stable, long-term employment, • 20 - 25 days annual leave plus bank holidays, • Quarterly discretionary bonuses, • Company pension scheme, • Training and development opportunities, • On-site parking HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV’s of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14695 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Isleworth, West London. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online | http://www.awdo.co.uk AWD-IN-SPJ

Principal Education is recruiting a Head of Design Technology (Engineering Specialist) for a secondary school in East London, starting in September 2026. The ideal candidate will manage the Design Technology department, deliver lessons, and contribute to school improvement.

Strategy Education is seeking a Head of Design Technology / Engineering to lead its DT and Engineering department starting September 2026. Applicants should hold Qualified Teacher Status (QTS) with a strong subject specialism in Design Technology or Engineering.

A secondary school in Barking and Dagenham is seeking a Head of Design & Technology to lead the department and deliver high-quality lessons. Ideal candidates will possess strong leadership skills and experience in teaching Design & Technology at the secondary level.

TimePlan Education is seeking a passionate Head of Design and Technology to join a supportive team in Islington, starting September 2026.

A prominent education recruitment firm is seeking a Head of Design Technology for an Outstanding secondary school in Kingston, South West London. Candidates must have UK QTS and strong academic qualifications, with the responsibility of inspiring and managing the Design Technology department.

An international architecture firm is seeking an experienced Architect for a one-year contract in London, focusing on impactful educational projects. Proficiency in Revit and familiarity with Department for Education specifications are essential.

TLTP Education is seeking a Head of Design & Technology for a permanent position in Barking and Dagenham. This role involves leading the Design & Technology department, delivering high-quality curriculum, and supporting staff. Ideal candidates will have proven teaching experience in secondary educat

Head of Engineering / Design Technology. An ambitious and forward-thinking secondary school in East London is seeking to appoint an experienced and inspirational Head of Engineering to lead a successful Design Technology department from September 2026. Have strong experience teaching Engineering and

Q - Are you an experienced DT Teacher who is looking to make the step up to Head of Design Technology?. The Head Teacher is looking for an ambitious Head of Design Technology who is keen to take their DT Department to new heights. The School is well invested in the Education sector setting new teach

Lead curriculum design, implementation, and review across KS3, KS4, and KS5 (where applicable). A strong subject specialism in Design Technology and/or Engineering. A clear vision for high-quality DT and Engineering education.