Heating jobs in London - Page 9Create job alerts

TristoneNash are working with a provider of social housing, to assist them with the recruitment of a Heating & Ventilation Contracts Manager. The Contracts Manager will oversee replacement, servicing, maintenance, and small project works, ensuring systems are safe, compliant, and operating efficiently Key responsibilities will include: Leading and managing contracts for heating plant, mechanical ventilation, and heat networks, ensuring full compliance with all statutory and regulatory requirements. Monitoring contractor performance against specifications and KPIs, and drive service improvements where required. Overseeing budgets, forecasting, spend control, and authorise payments and variations to ensure value for money. Acting as the key point of contact for contractors, residents, and stakeholders, resolving operational issues and keeping customers informed. Supporting procurement exercises and ensuring contracts align with organisational requirements. Oversee third-party audit programmes and maintain accurate compliance records from inception to closure. Investigate incidents and complaints, embedding lessons learned and promoting a strong culture of safety and compliance. To apply for this position we are looking for: Level 3 NVQ Diploma in Gas Maintenance and Repair (or equivalent experience). Strong technical knowledge of heating and ventilation systems, gas safety, and commercial contract management. Sound understanding of current legislation and regulations, including Gas Safety Regulations 1998, Health & Safety legislation, CDM, and relevant building regulations. Experience managing third-party contractors and delivering large-scale gas testing programmes. Proven ability to manage budgets, forecast spend and deliver value for money while mitigating risk. Ability to maintain accurate compliance and project records from inception to completion. Please submit your CV for consideration or alternatively contact a member of the team for more information

We need an experienced AC and MVHR engineer to join our team. You'll be installing air conditioning systems - from simple splits in houses to big VRV systems in offices and shops. As we also do heating work, there's plenty of work all year round, not just in summer. What You'll Be Doing Installing AC Systems • Fitting split, multi-split and VRV air conditioning in homes and businesses, • Running pipework, making electrical connections and setting up systems, • Charging systems with refrigerant and getting them running properly, • Working on your own or as part of a team on bigger jobs, • Filling out job sheets and handover paperwork Working to Standards • Using your F-Gas ticket to handle refrigerants safely, • Following Daikin, Mitsubishi and other manufacturers' instructions, • Working safely on site and following health and safety rules, • Doing quality work that keeps our customers happy, • Going on training courses to learn about new kit What You Need • F-Gas (essential), • Good experience installing splits, multi-splits and VRV systems, • Know your way around Daikin and Mitsubishi kit, • Can do pipework, brazing and pressure testing, • Full UK driving licence, • Happy working at height and in tight spaces Nice to Have (But Not Essential) • NVQ Level 2 or 3 in air con and refrigeration, • Experience with heating systems, • Heat pump experience, • Worked on commercial jobs before, • Electrical qualifications, • Done service and maintenance work before What's in It for You • Good pay (salary depends on experience), • Van and fuel card, • Training on new equipment, • Pension, • Room to grow with the company. Why Work for Us? The renewable energy sector is booming and we're growing fast. This job gives you steady work all year - AC in summer and ventilation/MVHR work in winter. You'll work with the latest kit and help the UK

Health & Safety Supervisor (Night Shift) Tier 1 Global Energy Infrastructure Contractor Energy from Waste Project Freelance: 18 Months Rate: up to £500 per day Shifts: 6pm - 6am (Monday - Sunday) We are currently searching for a H&S Supervisor for a landmark Energy from Waste project based in East London. This project will deliver a £1.5bn state-of-the-art Energy Recovery Facility, which will serve up to 180,000 homes through direct power production and district heating networks. As H&S Supervisor, you will be required to work on the Night Shift of the project, ensuring works are being delivered safely. The role: Be the H&S Ambassador on the project, coaching, supporting and coaching staff on positive H&S actions. Work collaboratively with Project and Construction Managers to identify and resolve H&S issues. Manage H&S training needs with the H&S Manager Review subcontractor Risk Assessments and Method Statements Controlling H&S systems on site and discussing performance issues where appropriate Conduct regular assessments on site and inform site management of unsafe practices or conditions. Required: 5+ Years experience working as a project-based H&S Supervisor/Advisor Experience in the EfW, Infrastructure, Nuclear or Power Generation sectors preferred Ability to work in a fast-paced environment and give advice on the spot Ability to carry out detailed inspections and recommendations Ability to give training to operatives and have an understanding of how the various trades work Essential Certifications: NEBOSH Desirable Certifications: Temporary Works, First Aider, Mental Health First Aider To apply for this role please send your CV through the portal or get in contact with Sam Marsden at Lonsite directly

Job Title: Mechanical Maintenance Engineer Salary: £48,000 - £50,000 Location: Canary Wharf, East London Job Type: Technical / Engineering Working Hours: Monday - Friday - Split Shift Pattern Job Summary If you have a strong background in Building Services, this could be the perfect opportunity for you. Our client is on the lookout for a committed and talented Mechanical Maintenance Engineer to join their dynamic team. You’ll play a key role in keeping a high-end commercial building running smoothly, safely, and efficiently. You’ll be responsible for maintaining and optimising key mechanical systems such as HVAC (heating, ventilation, and air conditioning), pumps, pressurisation units, pipework, and plant equipment. Mechanical Maintenance Engineer Key Responsibilities • Carry out planned preventative maintenance (PPM) on mechanical systems, • Respond to breakdowns and perform fault finding/repairs, • Maintain HVAC, pumps, boilers, and pipework, • Monitor and operate BMS systems, • Ensure health & safety compliance and follow permits, • Keep accurate maintenance records, • Support energy efficiency and system performance, • Liaise with contractors and building management Mechanical Maintenance Engineer Requirements • Level 2/3 in Mechanical Engineering or Plumbing, • Mechanical APs – desired, • 5 years’ experience in a similar position, • Right to work in the UK, • What’s on Offer, • Competitive salary of up to £50,000 per annum, • 25 Days Holiday, • Overtime, • Progression & training, • Call Out 1 in 3

Pre Construction Manager Location: Romford UK (Hybrid / Office & Site Based) Full-time Overview My client is a leading UK building services contractor delivering large-scale mechanical and electrical design, installation, and commissioning projects across commercial, residential, healthcare, education, and data centre sectors. They are seeking an experienced Pre-Construction Manager to lead early-stage project development, tendering, and technical pre-construction planning across multiple high-value MEP projects. Role You will manage the full pre-construction lifecycle from enquiry through to contract award, ensuring technical, commercial, and delivery solutions are developed and aligned with client expectations. This includes coordinating design input, cost planning, programme development, risk analysis, and bid submissions. Key Requirements Strong background in MEP / building services or construction pre-construction Experience managing tenders, bids, and early-stage project delivery Good understanding of mechanical and electrical systems design and installation Strong commercial awareness and cost planning ability Ability to coordinate multidisciplinary teams (design, estimating, delivery) Strong communication and client-facing skills Package £60,000 - £80,000 30 Days Annual Leave Company vehicle or allowance Pension scheme Private healthcare Performance bonus potential Training and career development opportunities Exposure to large-scale UK construction and MEP projects WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy. TPBN1_UKTJ

If you are a mechanically minded and skilled heating /plumbing engineer who is seeking a new and exciting role in the air source heat pump industry, then this could be the opportunity you have been waiting for! Bright Side Recruitment is assisting a rapidly growing, highly regarded, and very successful business in their search for an Installation Engineer with solid experience in plumbing and heating - NO GAS SAFE REQUIRED! The majority of the work is domestic / residential, along with small commercial projects from time to time. The role is being offered on a full time, permanent basis, Monday to Friday 8am to 4.30pm (4pm on Fridays). The company covers projects in and around the Greater London area, with the occasional project further afield in the Home Counties. The main duties will cover: • Installation and servicing of Air Source Heat Pumps, • Removing existing heating systems, • Upgrading radiators, • Completing pipework runs, • Installation and maintenance of unvented hot water systems, • Installation and maintenance of under floor heating systems, • Fault finding and associated remedial work Experience and accreditations required: • At least 4 years of experience gained from within a similar industry, • NVQ level 3 in Plumbing & Heating (or similar), • L3 certificate in installation & maintenance of heat pumps, • Ability to wire full heat pump system on S & Y plans., • Complete a heat pump installation from start to finish, • A thorough working knowledge and understanding of UK residential water regulations, • Unvented G3 qualification (ideal – not essential), • Full UK MANUAL driving license (6 points MAX), • Own tools and testing equipment (Ideally) What’s in it for you? • Company van & fuel card, • Company workwear, • Parking, tolls, and driving associated charges all paid for (except for parking fines of course), • Auto enrol pension (Nest) So, if you have the required experience and you’re seeking a move to a very exciting and forward thinking plumbing and heating company – please apply today, or contact Bright Side Recruitment for more information

HIU Engineer Fantastic career opportunity - £60k – PLUS Benefits Heating Installation Unit Engineer in London, United Kingdom required for national Heating/Facilities business. Job Description A Heating Installation Unit Engineer in the London area is responsible for the design, installation, maintenance, and repair of heating systems in residential, commercial, and industrial settings. This role requires a strong understanding of heating technology, safety protocols, and compliance with local regulations. Here are the key responsibilities and qualifications: Responsibilities: • Install and commission heating systems, ensuring they operate safely and efficiently. This includes connecting pipes, wiring controls, and testing equipment., • Perform routine maintenance and inspections of heating systems to ensure optimal performance and identify and address potential issues., • Diagnose and repair heating system malfunctions, including replacing faulty components, valves, or pipes., • Implement energy-efficient solutions and advise clients on ways to reduce energy consumption and costs., • Ensure that all heating installations meet local safety regulations and industry standards. Obtain necessary permits and approvals., • Maintain accurate records of work performed, including service reports, equipment manuals, and parts inventory., • Communicate with clients to assess their heating needs, provide cost estimates, and explain maintenance and repair options. Qualifications: • Experience in heating system installation and maintenance. Experience with different types of heating systems, such as gas, electric, or renewable energy systems., • Proficiency in heating system design, installation, and maintenance. Familiarity with a range of heating equipment and control., • strong understanding of local and national regulations regarding heating installations and safety standards., • The ability to diagnose and solve complex heating system issues., • Excellent communication and customer service skills to interact with clients and address their heating needs., • A commitment to safety protocols and the ability to work safely with heating equipment. HIU Engineers in London are essential for ensuring that residents and businesses have reliable and efficient heating systems, especially during the city's colder months. This job description provides a general overview of the role's responsibilities and qualifications

About The Role HomeServe are now recruiting for directly employed Drainage Engineers to join our team! • Location - Kingston-Upon-Thames • Full Time - 40 hours per week. T his includes some weekend, evening and bank holiday work • Salary - £34,720 - £39,310 (salary dependent upon experience). Plus a £1500 guaranteed bonus in your first year HomeServe offers an industry leading reward package to attract the best in our field: • Additional paid overtime • Fantastic pension scheme including Income Protection Cover • 33 days days annual leave (including bank holidays) with the option to buy, sell or carry over up to an additional week • Up to £2500 Smart Tech and Home Improvements salary sacrifices to shop at Ikea and Currys, spreading the cost over 12 months • Free HomeServe Cover 8 policy • Employee assistance programme looking out for you and your family • Company van with fuel card • Use of company tools, uniform and PPE • Access to our private award-winning training facility and our excellent team of field-based coaches to support your ongoing learning and development • Learning and development opportunities • Monthly breakfast meetings with your team to share best practices and keep in touch as well as monthly reviews with your line manager About the role: At HomeServe we put the customers' experience at the forefront of everything we do. As a Drainage Engineer you will undertake the maintenance and repair work of drainage systems in our customers' homes. You will provide industry leading service and help us enhance our reputation, whilst driving customer growth. About You What you must have: • HPWJ Water Ticket • Full UK Driving Licence with no more than 6 penalty points • Excellent customer service • Proactive, 'can do' attitude • Keen eye for detail and problem-solving skills At HomeServe you'll be part of an open, engaged culture where everyone has an equal voice and the opportunity to get involved, as well as make a real difference in our customers' lives. You'll work in a fun, friendly and inclusive environment where people understand the value of their contribution to our goals and are encouraged to recognise a job well done. Training & Support: To help you settle in to your career at HomeServe, you will undertake our extensive training programme. • Week 1 - You will attend our Head Office in Walsall Monday - Friday, where we will cover all things HomeServe, health and safety and provide you with your tools and equipment • Week 2 - You will be buddied up with an experienced HomeServe Drainage Engineer Where geographically appropriate we will pay for your accommodation and meal allowance for your induction. The next steps: If you believe you are who we are looking forward for then click apply now! It's our people that truly make what we do so special. As part of the HomeServe family your job will be to put our customers first and we will give you everything you need to make this happen. About Us Here at HomeServe we work hard to build an inclusive, supportive, engaging and collaborative culture that empowers all our people to do the right thing. HomeServe has got over 30 years' experience taking care of the nations' homes. From home emergency cover to one-off repairs, we're here 24/7. Whether it's plumbing, drainage, heating or electrics our home experts are ready to get the job done. TPBN1_UKTJ

Pump Service Engineer - Field Based £37,000 - £42,000 Basic + Overtime & Callouts (Up to £60,000 OTE) Permanent, Full Time About the Company Our client is a leading specialist hire provider of pumping, heating and cooling solutions across the UK and Ireland. With a strong national depot network and a 24/7 service capability, they support customers with both planned projects and emergency response solutions across a wide range of industries including construction, utilities, facilities management and industrial sectors. The Role Based from the depot, you will work regionally carrying out service, maintenance, installation and breakdown support on a variety of pump systems. This is a field-based role where no two days are the same, supporting customers on both planned works and reactive callouts. Key Responsibilities Service, maintain and repair diesel and electric pump units, submersible pumps and associated equipment Install and commission pumping systems on customer sites Diagnose and fault-find mechanical and electrical issues Attend breakdown callouts as part of a 1 in 3 standby rota Complete service reports and relevant documentation accurately Ensure company vehicle, tools and stock are maintained Deliver high levels of customer service on siteWhat We're Looking For Experience as a Pump Engineer, Service Engineer or Field Service Engineer Strong mechanical knowledge is essential Candidates from other industries will be considered, such as Generator Engineers, Plant Engineers or similar, provided they have solid mechanical experience Ideally experience working on diesel engines and associated systems Strong fault-finding and diagnostic skills Ability to work independently in a field-based role Full UK driving licence (essential) Flexible attitude towards standby and overtimeWhat's on Offer £37,000 - £42,000 basic salary Realistic earnings up to £60,000 with overtime, callouts and standby payments Company vehicle and fuel card Tools and equipment provided Pension scheme Ongoing training and development Stable, long-term career opportunity with a market-leading organisationIf you're looking for a secure role with strong earning potential and plenty of overtime available, apply today with your CV. Pump Engineer - Dartford Pump Engineer - Dartford Pump Engineer - Dartford Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Commercial Mechanical Engineer Contract Role Essex £300 - £320 a day We are hiring a Commercial Mechanical Engineer who is quality driven, dynamic and a skilled individual who is looking for a new adventure in the construction and engineering industry. The Role As our Commercial Mechanical Engineer, you will be responsible for maintaining property services by delivering planned and reactive maintenance to an agreed programme, budget, and quality within the companys operational targets. You will be expected to: To carry out Planned Preventative Maintenance to all Plant Room Equipment as per maintenance schedules. Assisting sub-contractors where necessary, monitoring repairs, or providing assistance where required. To carry out plant inspections, diagnose faults, fit parts, and carry out repairs to mechanical systems, such as pumps, valves, pipework etc. Sound Knowledge, of Heating, and Hot Water system operation and control with understanding of system design. Installation of replacement plant and components such as, Pumps, Valves, Pressure Switches Automatic Air Vents etc. Installation Pipework to include safe isolation of systems repairs and modification. Ability to carry out repairs within communal areas to Radiators, valves, and pipework. Knowledge of communal ventilation systems and ability to carry out the necessary maintenance and repair of these systems. Knowledge of cold-water booster systems, operation, and repair. Identify faults and report issues in a timely manner. Consulting with Suppliers to obtain the necessary replacement component costs to include and labour requirements and submitting these to the Mechanical Supervisor as required. To complete digital records PPMs planned works and reactive repairs for each task using our ACIMs software. To comply with safe working practices ensuring the safety of the workforce and public is always maintained. Liaise with all stakeholders as required to ensure a high-quality service is delivered and a high level of customer satisfaction is achieved. Responsible for the delivery of planned commitments to the client, ensuring agreed KPIs and service levels are being met. To maintain a high standard of customer service for all internal and external facing activities. To attend toolbox talks. To comply with the companys Health and Safety Policy at all times and follow all related safe systems of work. To undertake call out duties on a scheduled out of hours call out rota as required. Working hours will be Monday to Friday, 08:00 am to 17:00 pm The Mechanical Engineer To be considered for our Commercial Mechanical Engineer role, you will have the following skills and experience: Qualifications Desired CCN1, CENWAT, HTR1, CKR1 DAH1 CORT1 CIGA1 ICPN1 TPCP1A BMP1 Experience Experience as a suitably qualified Commercial Mechanical Engineer working in Commercial and Domestic premises. Appropriate industry qualifications. Time served in a Mechanical/Commercial setting, essential. Plumbing pipework skills, copper, steel including pipe threading and mechanical pressing where required. Basic electrical skills. Understanding of Heating, Hot Water and Ventilation systems. Use and ability to train in the use of PDA devices and company software. Skills/Knowledge The ability to establish and maintain effective, professional working. relationships with internal and external stakeholders Excellent communication and interpersonal skills To be able to work as part of a team It is a requirement that a valid full clean driving licence is maintained. If you feel you have the skills for the Commercial Mechanical Engineer, please apply now! TPBN1_UKTJ

Reporting to – Head of Mechanical Maintenance Working Hours: Mon – Fri, 8am – 5pm Probation Period: 6 months Job Type: Full Time, Permanent Job Location: Various Sites & Head Office Start Date: Immediate SCOPE 1. To provide leadership and technical oversight within the Water Services department, with a primary focus on statutory L8 compliance, water hygiene, plumbing, drainage and pump maintenance safety management., 2. East West Connect provide Building Services Maintenance (Reactive, Planned Preventative and Small Works) across RVAC, Gas/Heating, Water Services, Fire & Security and Electrical Compliance., 3. This role supports continued company growth and service quality by ensuring safe, compliant and efficient delivery of all water‑related works. KNOWLEDGE, COMPETENCY REQUIREMENTS 1. Prior knowledge of company policies and procedures for delivering safe and compliant water services in commercial and domestic environments (E), 2. Experience working within an employer’s integrated management system (D), 3. HNC/HND Building Services or Mechanical Engineering – NVQ Level 5 or above (E), 4. Experience with CAFM/CMMS (D), 5. Knowledge of SFG20 maintenance schedules (D), 6. Commercial H&S Awareness Course (D), 7. Full clean driving licence (E) This section provides guidance on competency requirements for the Water Services Manager responsible for delivery and compliance across water systems (water hygiene, closed-loop water quality, pumps, LTHW/LTHH interfaces, domestic and commercial plumbing systems, soil/vent and drainage). Competence should be evidenced through qualifications, relevant experience, and demonstrable ability to plan, supervise, assure and report compliant works. Statutory compliance & water hygiene (ACOP L8 / HSG274 / BS 8580) • Understands legal duties and roles (Duty holder/Responsible Person/Authorised Person as applicable), and can support governance for ACOP L8, HSG274 Parts 1–3 and BS 8580-1 requirements., • Can implement and maintain a Written Scheme of Control: task schedules, responsible persons, escalation routes, corrective actions and record-keeping., • Can review/quality-check legionella risk assessments, schematics, asset registers and logbooks; identify gaps and drive closure., • Can manage monitoring regimes (temperatures, flushing, inspections, tank checks, TMV checks) and interpret results to prioritise remedials., • Understands sampling strategy and actions (e.g., legionella, TVC) including liaison with UKAS labs and applying appropriate corrective controls., • Can plan and supervise remedial works (tanks, calorifiers, dead-legs, insulation, blending valves, pipework alterations) ensuring verification and revalidation., • Can lead/participate in internal audits and client audits; produce evidence packs and close out non-conformances., • Can manage incidents (positive samples, loss of control, contamination) with clear containment, communications and documented lessons learned. Closed-loop water quality (LTHW/LTHH & sealed systems) • Understands closed-loop system purpose and common failure modes (corrosion, scaling, microbiological growth, air ingress, fouling) and the impact on plant efficiency and asset life., • Can specify and manage water treatment regimes (inhibitors/biocides as applicable), sampling frequency, target parameters and reporting., • Can interpret water analysis results (e.g., pH, conductivity/TDS, inhibitor residual, iron/copper, microbiological indicators where applicable) and initiate corrective actions., • Can plan and oversee cleaning/flushing activities (power flush, side-stream filtration, chemical clean) including method statements, waste handling and reinstatement testing., • Understands interfaces with LTHW/LTHH plant (boilers, heat exchangers, pressurisation units, expansion vessels, air/dirt separators) and can coordinate works to minimise operational risk., • Can manage specialist subcontractors and verify deliverables (pre/post samples, certificates, commissioning sheets). Pumps, booster sets & pressurisation systems • Working knowledge of common pump systems: domestic boosters/pressurisation, circulation pumps, sump/effluent pumps, macerators, condensate pumps and associated controls., • Can plan PPM and reactive response: set-point checks, vibration/noise checks, seal/bearing indicators, strainers, non-returns, isolation valves and control panel alarms., • Can coordinate safe isolations (electrical and hydraulic), drain-down/refill, venting and functional testing/commissioning., • Can oversee troubleshooting and ensure evidence-based repairs (fault codes, trend data, flow/pressure checks)., • Can manage specialist OEM/subcontractor support and validate handover documentation (test results, settings, photos, certificates). Domestic & commercial plumbing systems (hot/cold water) • Understands hot and cold water distribution principles in domestic and commercial buildings, including storage, recirculation and temperature control., • Working knowledge of Water Supply (Water Fittings) Regulations/Byelaws, backflow prevention (air gaps, RPZ where applicable), and good practice installation standards., • Can manage TMV lifecycle: selection/fit-for-purpose, routine testing, fail-safe checks, servicing and documentation., • Can plan and supervise installation/modification works: isolation strategy, phased shutdowns, commissioning, disinfection/chlorination where required, and reinstatement verification., • Can assess defects and risks (dead legs, stagnation risk, scalding risk, cross-connections, inadequate insulation) and produce remedial plans and quotations. Soil, vent & drainage systems • Understands soil and vent principles, traps/seals, venting, odour issues and common failure modes in above/below ground drainage., • Can manage planned and reactive drainage works including jetting, descaling, root ingress treatment, minor repairs and renewal planning., • Can interpret CCTV survey outputs and translate findings into remedial scope, priority and costed plans., • Understands environmental and H&S controls relevant to drainage works (waste handling, contamination risks, COSHH, and confined spaces awareness where applicable). Project / contract management (delivery, commercial & governance) • Can define scope from surveys/specifications, develop method of delivery, and produce programmes that protect statutory compliance and site operations., • Competent in procurement and subcontractor management: pre-start reviews, competence checks, RAMS review, supervision, and performance management., • Can control cost, labour and materials; produce accurate quotations; manage approvals, purchase orders and invoicing inputs., • Understands change control: identifying variations, pricing, client sign-off, and maintaining a clear audit trail., • Can manage risk and dependencies (access, isolations, permits, shutdown windows, customer impact) and coordinate stakeholders., • Can produce client-ready deliverables: reports, certificates, O&M information (where required), commissioning records and compliance evidence packs. Leadership, competence assurance & quality • Can supervise multiple workstreams while maintaining quality, safety and compliance; knows when to escalate technical risk., • Can set and maintain a competency matrix for engineers and subcontractors (water hygiene, plumbing, pumps, drainage), including refresher intervals and evidence control., • Can carry out technical and documentation QA checks (service sheets, logbooks, photos, certificates) and reduce rework/returns., • Can coach and develop team members through site visits, toolbox talks (supplementary) and targeted training plans., • Can monitor performance against KPIs/SLA and lead corrective actions for recurring defects and non-conformances. Health, safety & environmental competence (water-related works) • Can review and implement RAMS and site permits relevant to water works (e.g., isolations, hot works where applicable, working at height, plantrooms, lone working)., • Understands COSHH principles for water treatment chemicals and can ensure safe storage, dosing, handling and waste disposal arrangements., • Can ensure safe system of work for drain-down/refill, disinfection, sampling and access to tanks/voids/risers (including confined spaces awareness where applicable)., • Can investigate incidents/near misses and implement corrective actions through the IMS. Typical evidence (minimum/desired) Essential evidence: demonstrable experience managing compliant water services delivery in occupied buildings; proven ability to manage subcontractors and control quality/compliance records; strong working knowledge of ACOP L8 and HSG274 requirements; competent report writing and client communication. Typically desired (role dependent): recognised water hygiene/legionella qualification (e.g., City & Guilds/LCA/WMSoc pathway), plumbing qualification (NVQ L2/3) and/or relevant building services qualification; demonstrable experience managing closed-loop water treatment and pump/pressurisation systems; WRAS knowledge/certification. CPD: maintains ongoing CPD covering water hygiene compliance, water treatment/closed systems, and relevant H&S/commercial contract management topics. DUTIES Team Leadership & Management • Lead a team of Plumbers, Water Hygiene Technicians, Pump Engineers and Drainage Engineers to deliver safe, compliant and high‑quality services., • Provide technical mentorship, support and operational direction., • Identify recurring issues and implement root‑cause corrective improvements., • Facilitate regular team meetings focusing on performance, compliance and continual improvement., • Monitor KPIs, conduct 1‑2‑1 reviews, identify training needs and prepare management reports., • Use SFG20 schedules to optimise PPM planning, statutory L8 compliance and resource allocation. Technical Support & Problem‑Solving • Act as the senior technical authority for all plumbing, drainage, pumps, water hygiene and water treatment operations., • Provide escalation support for complex technical issues, commissioning tasks and diagnostic work., • Ensure all works follow statutory guidance, industry best practice and manufacturer recommendations., • Review water treatment reports, logbooks, legionella monitoring records and compliance documents prior to client submission., • Promote technical excellence and hands‑on development within the team. Water Hygiene, L8 Compliance, Auditing & Accreditation • Lead water compliance across all operational sites., • Ensure full compliance with:, • ACOP L8, • HSG274 Parts 1–3, • BS 8580‑1 – Legionella Risk Assessment, • Water Supply (Water Fittings) Regulations, • Manage internal audits of water hygiene tasks, sampling regimes, monitoring results and engineer competencies., • Ensure all logbooks, monitoring sheets, flushing records, sampling data and remedial actions are accurate and complete., • Oversee water treatment activities for closed systems, calorifiers, cooling towers (if applicable), chlorine dioxide dosing and softening systems., • Maintain readiness for external audits including LCA and client audits., • Investigate water hygiene incidents, non‑conformances and near misses, implementing corrective actions. Plumbing, Drainage & Pump Operations • Oversee maintenance and remedial works across:, • Hot & cold water plumbing systems, • Drainage networks (internal/external), • Booster sets, pressurisation units and general plumbing pumps, • TMVs, calorifiers, tanks and expansion vessels, • Ensure assets are verified and documented appropriately., • Conduct lifecycle assessments and make recommendations for repair, upgrade or replacement., • Ensure correct isolation, drain‑down, reinstatement and testing procedures are followed. Asset Management & Lifecycle • Maintain accurate asset registers and statutory documentation., • Prepare quotations aligned with client budgets and technical requirements., • Use CAFM/CMMS platforms to manage compliance tasks, asset information and performance metrics. Health & Safety Management • Ensure full adherence to Health & Safety policies, RAMS and CPPs across all works., • Promote a strong safety culture, ensuring PPE compliance and safe working practices., • Deliver toolbox talks, safety briefings and awareness training. Continuous Improvement & Innovation • Identify improvements to maintenance processes, reducing costs and improving performance., • Stay updated on emerging technologies, water treatment methods and regulatory changes., • Encourage innovation within the team and evaluate new products and tools for operational benefit., • Consistently champion the company’s core values across all activities. MEETINGS • Attend and prepare reports for management meetings., • Attend pre‑bid and interim bid meetings to provide technical input., • Attend client meetings, recording all discussions., • Attend handover and tender meetings, ensuring accurate documentation., • Attend post‑contract review meetings and track improvement actions., • Attend appraisal meetings, company staff meetings, H&S meetings and team meetings. See full job description for more information

HVAC Engineer £45k-£50k Company based near Greenford Job Overview My client are seeking two skilled and motivated professionals to join their Engineering team: an HVAC Engineer and an HVAC Engineer (Ventilation Bias). Both roles will be responsible for carrying out planned preventative maintenance, reactive callouts and minor project works across a range of HVAC and associated systems, including general fault finding and repair of assets and services. The successful candidates will ensure all work carried out on plant and equipment is accurately recorded and maintained within site manuals, both in hard copy and electronic formats. You will be required to participate in an out-of-hours emergency call-out rota and demonstrate flexibility outside of core working hours when required. Working as part of my clients team, you will develop and maintain effective working relationships with colleagues, clients and customers. A professional and courteous approach when dealing with clients, customers and the general public is essential to uphold and enhance the reputation of my client. You will be expected to continually demonstrate a strong commitment to customer care and maintain clear and effective communication with customers, line management and office support staff at all times. DUTIES Planning and undertaking scheduled maintenance Responding to breakdowns Diagnosing faults Repairing equipment Supervising engineering apprentices Obtaining specialist components, fixtures or fittings Maintaining accurate records Ensuring compliance with company/health and safety legislation Creating maintenance procedures Managing van stocks of supplies and equipment Out of Hours Rota 'on-call' work To develop an extensive knowledge of mechanical, electrical building services and a good understanding of their interfaces with general building works associated with them. To gain knowledge of the employee’s handbook, my clients policies and processes and clients ISO system of works. KNOWLEDGE • Fault finding, rectification, planned maintenance of split systems, multi systems and VRV systems. service chillers, pumps and all associated chilled water pipework, air handling units, ventilation systems, VRV, VRF, multi and split type air conditioning units, stand-alone/close control units, dry air coolers controls & panels., • Sound knowledge of Health and Safety Legislation, Safe Systems of Work and contingency planning, • Ability to interpret from drawings, instructions and specifications, • Good communicator, verbally and written, and have a good level of computer literacy and working knowledge of IT systems and packages that include MSN Office, Outlook & Internet Explorer., • Self-motivated with the ability to make decisions and resolve problems within clearly defined parameters HVAC Ventilation Bias Engineer • Proven experience in the ventilation industry, including ductwork or fire damper testing/remedials - HVAC Ventilation Bias Engineer (E), • Knowledge of TR19 guidelines and BSEN 15780 (E), • Comfortable working in and around plant rooms, at height, or in confined spaces (E) E - Essential, D - Desirable for both positions; NVQ Level 2/3 (C&G) Heating and Ventilating - Industrial and Commercial Installation (6188-30) or Heating and Ventilating - Ductwork Installation (6188-31) or Planned and Reactive Maintenance on Heating and Ventilating Systems (6188-32) or equivalent (E) NVQ Level 2/3 in Refrigeration and Air Conditioning/City & Guilds 2079 – Handling Refrigerants or F-Gas (Category I) certification (D) Fault finding, rectification and planned maintenance experience. (E) Full driving licence (UK (E)) Knowledge Skills Requirements: - Sound knowledge of Health and Safety Legislation, Safe Systems of Work and contingency planning (E) Ability to interpret from drawings, instructions and specifications (E) Good communicator, verbally and written, and have a good level of computer literacy and working knowledge of IT systems and packages that include MSN Office, Outlook & Internet Explorer. (E) • Self-motivated with the ability to make decisions and resolve problems within clearly defined parameters. (E)Substantial practical experience: - have experience of mechanical services, plumbing and heating maintenance on domestic/industrial/commercial systems.(D)Also experience of mechanical maintenance and repairs. (D)Enhanced DBS – Can be arranged (D)Confined Space (D)City & Guilds 2365 or 2357 in Electrical Installation or equivalent (D) SKILLS • Substantial practical experience required: maintenance in a domestic/industrial/commercial scenario., • Must have relevant mechanical qualifications., • To always present a professional image: onsite, in the office and to clients., • Ability to apply basic problem-solving skills to a variety of situations., • Full - Clean driving license that enables the person to drive in the UK., • Ability to establish good relationships with internal and external team members., • Good levels of verbal and written communication skills. OTHER • The ability to travel to a range of sites., • Appreciation that there might be out of hours working, agreed in advance. Join our my client as an HVAC Technician where your expertise will contribute significantly to the comfort and satisfaction of our clients! Job Types: Full-time, Permanent Pay: £45,000.00-£50,000.00 per year Benefits: • Company pension, • Cycle to work scheme, • Health & wellbeing programme, • Life insurance If this sounds like you please send George your cv in the first instance

Reporting to – PPM Contracts Manager Working Hours: Mon – Fri, 8am – 5pm Probation Period: 6 months Job Type: Full Time, Permanent Job Location: Various Sites Start Date: Immediate Scope • To carry out planned preventative maintenance, reactive callouts and minor projects on all associated equipment, general fault finding and repairs to assets and services, • To maintain up to date records of all work carried out on plant and equipment within the site manuals both hard copy files and electronically, • To participate within an out of normal working hours emergency call out rota and be flexible outside of core working hours, • To maintain effective working relationships with colleague’s clients, customers and work as part of the EWC Team, • To deal courteously with clients, customers and the general public to maintain and enhance the reputation of EWC, • To continually demonstrate an understanding and commitment to customer care, • To ensure clear communication with customers, line management and office support staff See full job description for more information Knowledge • Fault finding, rectification, planned maintenance of split systems, multi systems and VRV systems. service chillers, pumps and all associated chilled water pipework, air handling units, ventilation systems, VRV, VRF, multi and split type air conditioning units, stand-alone/close control units, dry air coolers controls & panels., • Sound knowledge of Health and Safety Legislation, Safe Systems of Work and contingency planning, • Ability to interpret from drawings, instructions and specifications, • Good communicator, verbally and written, and have a good level of computer literacy and working knowledge of IT systems and packages that include MSN Office, Outlook & Internet Explorer., • Self-motivated with the ability to make decisions and resolve problems within clearly defined parameters CRITERIA (E = Essential D = Desirable) • NVQ Level 2/3 (C&G) Heating and Ventilating – Industrial and Commercial Installation (6188-30) or Heating and Ventilating – Ductwork Installation (6188-31) or Planned and Reactive Maintenance on Heating and Ventilating Systems (6188-32) or equivalent (E), • NVQ Level 2/3 in Refrigeration and Air Conditioning/City & Guilds 2079 – Handling Refrigerants or F-Gas (Category I) certification (D), • Fault finding, rectification and planned maintenance experience. (E), • Full driving licence (UK (E)), • Knowledge Skills Requirements: – Sound knowledge of Health and Safety Legislation, Safe Systems of Work and contingency planning (E), • Ability to interpret from drawings, instructions and specifications (E), • Good communicator, verbally and written, and have a good level of computer literacy and working knowledge of IT systems and packages that include MSN Office, Outlook & Internet Explorer. (E), • Self-motivated with the ability to make decisions and resolve problems within clearly defined parameters. (E), • Substantial practical experience: – have experience of mechanical services, plumbing and heating maintenance on domestic/industrial/commercial systems.(D), • Also experience of mechanical maintenance and repairs. (D), • Enhanced DBS – Can be arranged (D), • Confined Space (D), • City & Guilds 2365 or 2357 in Electrical Installation or equivalent (D) Skills • Substantial practical experience required: maintenance in a domestic/industrial/commercial scenario., • Must have relevant mechanical qualifications., • To always present a professional image: onsite, in the office and to clients., • Ability to apply basic problem-solving skills to a variety of situations., • Full, Clean driving licence that enables the person to drive in the UK., • Ability to establish good relationships with internal and external team members., • Good levels of verbal and written communication skills. Other • The ability to travel to a range of sites., • Appreciation that there might be out of hours working, agreed in advance. Duties • Planning and undertaking scheduled maintenance, • Responding to breakdowns, • Diagnosing faults, • Repairing equipment, • Supervising engineering apprentices, • Obtaining specialist components, fixtures or fittings, • Maintaining accurate records, • Ensuring compliance with company/health and safety legislation, • Creating maintenance procedures, • Managing van stocks of supplies and equipment, • Out of Hours Rota ‘on-call’ work, • To develop an extensive knowledge of mechanical, electrical building services and a good understanding of their interfaces with general building works associated with them., • To gain knowledge of the EWC employee’s handbook, EWC policies and processes and EWC ISO system of works. Equal Opportunities East West Connect Ltd is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on age, race, colour, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristics. This policy applies to all employment practices within the organisation, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training and apprenticeship. East West Connect makes hiring decisions based on qualifications, merit and business needs at the time

Mechanical Maintenance Engineer – FM Service Provider – Canary Wharf – £47,500 + Package Are you a Mechanical Maintenance Engineer ready for your next challenge with a leading Facilities Maintenance provider? CBW Staffing Solutions is currently recruiting a Static Mechanical Engineer / Plumber to deliver planned and reactive maintenance across a prestigious high-end residential contract in the heart of Canary Wharf. Working as part of a close-knit team of five on site, you'll play a key role in keeping a flagship building running to the highest standards. This is an excellent opportunity for an experienced maintenance plumber already working in a similar environment who is looking to take the next step in their career, with clear routes for progression and a competitive package of up to £47,500. Key Duties & Responsibilities Carry out planned and reactive plumbing maintenance across domestic and commercial installations, including pressure systems, FCUs, pipework, radiators, valves, pumps and motors Exchange domestic central heating components including radiators, cylinders, tanks and system controls Perform power flushing of central heating systems Service and maintain hot and cold water systems, calorifiers, boilers and cold water storage tanks Carry out Legionella control and general plumbing services Work confidently with Heat Interface Units (HIUs) Pressure-test pipe systems and monitor gauges to identify leaks Liaise professionally with residents and clients, providing updates and addressing concerns with a customer-first approach Close down reactive works in line with site requirements and report any issues to the contract support desk Maintain accurate records of inspections, repairs, installations and compliance documentationHours of Work & Package Basic salary up to £47,500 Monday to Friday, 7am – 4pm / 10am – 7pm (rotating) Call-out rota: 1 in 2 20 days holiday + Bank Holidays Tablet and work phone provided Full company uniformEssential Requirements City & Guilds Level 2 in Plumbing (Essential) City & Guilds Level 3 in Plumbing (Desirable) Proven HIU experience Background in high-end residential maintenance Strong track record in commercial building maintenance Multi-skilled, client-facing, with excellent communication Able to pass a DBS check or hold a current DBS certificate Able to provide copies of trade certificatesInterested? If this sounds like the right move for you, send your CV to Dan Barber at CBW Staffing Solutions today — don't miss out on this fantastic opportunity

Sales Manager – HPM & Built Environment Portfolio Hybrid (Dartford, 3 days in office) The salary is up to £37,000 (DOE) plus extremely achievable commission on delegate sales (circa £7,000) and an OTE of £8,000 across HPM & GGP, plus company benefits. We are looking for a driven and commercially minded Field Sales Manager to join our Built Environment portfolio, working across Heating & Plumbing Monthly (HPM), Glass & Glazing Products (GGP), and Roofing, Cladding & Insulation (RCI). In this role, you will play a key part in shaping and delivering commercial strategy across our established print and digital platforms, while also driving delegate sales for our three prestigious industry award ceremonies. You will work in a fast-paced, specialist media environment where commercial awareness, relationship-building, and collaboration are essential. This is a great role for someone who enjoys taking full ownership, understands how to balance competing priorities, and is energised by turning their work into real commercial impact across respected industry brands, engaged professional communities, and high-profile events. As a Sales Manager, you will: Drive revenue across print, digital and event channels on GGP & HPM magazine. Sell delegate places for three major industry award events. Build and develop strong relationships with clients across the built environment sector. Identify and win new business while growing existing accounts. Work closely with editorial and marketing teams to deliver effective campaigns. Manage multiple priorities and revenue streams in a fast-paced environment. Conduct regular UK client and agency face-to-face meetings. About the Portfolio Our Built Environment brands have been trusted voices in the UK construction industry for over 40 years, delivering essential content to contractors, installers, architects, and decision-makers. Alongside our publications, the portfolio includes three leading award ceremonies: Two within the Roofing & Cladding sector, (Pitched Roofing Awards, & Façade Awards). One within the Glass & Glazing sector (Installer Awards). What we’re looking for Must-haves: Proven experience in a revenue-generating sales role. Strong commercial awareness with the ability to negotiate and close deals. Confident building relationships and managing clients face-to-face and over the phone. Highly organised, with the ability to manage multiple revenue streams and priorities. Self-motivated and comfortable working towards targets in a fast-paced environment. A full UK driving licence is required for this role. You will be expected to travel the UK for face-to-face meetings and attending industry events. Ability to work collaboratively within a team to ensure the smooth and efficient running of the portfolio. Nice-to-haves: Experience in the Built Environment sector, publishing, or event sales. Account management experience, with a focus on growing existing relationships. Demonstrate delegate growth for either awards events or conferences. An interest in the built environment, i.e. keen on DIY. If you do not meet every requirement but bring transferable skills, sound judgement and fresh thinking, we encourage you to apply. Why join Mark Allen Group? An exciting opportunity to develop your career within a large and rapidly growing publishing organisation. Be part of a specialist media business with strong, trusted brands and loyal professional audiences. Work in a hybrid environment that supports focus, collaboration and flexibility. Learn and grow through tailored development, mentoring and hands-on experience. Contribute to work that informs, connects and supports industries that matter. Join a culture grounded in passion, creativity, fairness and long-term thinking. How to apply Upload your application via our careers site. You may include a short video introduction if you wish (optional). References or recommendations can also be shared (optional). Right to Work: Applicants must have the right to live and work in the UK. We do not offer visa sponsorship. About Us For over 40 years, Mark Allen Group has built and grown specialist media brands that inform, connect and support professional communities. We operate across healthcare, education, agriculture, business, finance, travel retail, exhibitions and critical communications, combining trusted content, data, events and insight. We are a commercial media owner with a long-term mindset, balancing strong legacy brands with innovation and evolution. Our people play a central role in shaping how our audiences engage with us today and how we grow for the future

Mobile AC Engineer London My client is currently recruiting for a mobile AC engineer in London. You will have your city and guilds or nvq 2 in AC and fgas cat1 and a background in commercial maintenance. Sector: Commercial Maintenance Duties will include all planned and reactive maintenance on heating and cooling including AHU's, fan coil, VRV's, re-gassing and de-gassing, cleaning filters, general maintenance duties as well as reporting back to managers and clients. Salary is 38-45K with van, phone, tablet, tools, uniform and more. Hours are 8-5 Monday to Friday with call out 1 in 8. This is a great opportunity to join a company that can offer ongoing development. If you are interested in this position, please e-mail your CV to Matt at Alex Young Recruitment. TPBN1_UKTJ

Plumbing & Heating Gas Engineer Covering Sevenoaks, Orpington & Bromley Van & Fuel Card Provided We’re currently looking for an experienced Gas Plumbing & Heating Engineer to join a leading social housing provider, delivering high-quality maintenance services across a well-managed

About your role:We need Heating Installation engineers to join our team of experienced Gas Engineers, to ensure that our customers get the help they need, when they need it.

Contracts Manager (Heating & Ventilation) Location: Wembley, London Salary: Upto to £55,000 Contract: Permanent, full time Working pattern: Hybrid working, 2 days per week from the office with travel across London and Hertfordshire Office: North West London This is a strong opp

Plumbing and Heating Engineer (Full Training on Biomass Systems) Field-based role - You can be based in or around the following areas: Preston, Liverpool, Manchester, Sheffield, Blackburn, Bolton, Warrington, Rotherham, Rochdale, Oldham, Stockport, Macclesfield, Chester £32,000 - £38,0

Electrician – Heating Systems (Boilers & Storage Heaters) - SE London Salary: £42,000 + unlimited overtime Benefits: Company van & fuel, 29 days holiday, Pension A new opportunity for a skilled and motivated Electrician to join a busy team working on social housing contracts in SE Lond

About your role:We need Heating Installation engineers to join our team of experienced Gas Engineers, to ensure that our customers get the help they need, when they need it.

Heating, Ventilation & Air-Conditioning (HVAC) Technician.

We are a well-established, family-owned heating and plumbing business with a strong reputation and exciting growth plans.

Assistant Plumbing & Heating Manager Location: Willesden, NW10 2JJ Salary: Negotiable Hours: 7:30am – 17:30pm Monday – Friday Alt Saturdays 6:30am – 15:30pm About The Role: A family owned builders merchants are looking for an Assistant Plumbing and Heating Manager to play a key lea

Various Tasks to be carried out; Monthly PPM and reactive visits relating to plant; Heating & Hot water Calorifiers, Plate Heat Exchangers. Key Responsibilities: Conduct regular inspections and servicing of all heating systems to ensure optimal perf. Mechanical Maintenance Engineer (service and re

Lead the delivery of planned and reactive heating replacement programmes (including BER works) for as, Oil and Renewable fuel types in line with contract requirements. To lead and manage all heating installation activities across allocated contracts, ensuring delivery is safe, compliant, on time, an

Our company is growing, and we have an excellent opportunity for Air Source Heat Pump Engineers or Gas Central Heating Engineers.

Installation, servicing, and repair of heating systems and plumbing works * Working on boilers, radiators, pipework, and hot water systems * Fault finding and diagnostics on gas appliances * Carrying out safety checks and ensuring compliance with regulations * Providing excellent custome

Installation of Communal Heating Pipework & Associated Fittings. Bridge Recruitment is helping one of our established clients recruit an experienced Commercial Heating Engineer to join their ever-expanding team. Responsibility of the Commercial Heating Engineer:.

Heating Plumber/ Gas Engineer – Spider is advertising on behalf of a highly experienced family-owned plumbing service provider who are looking for a Heating Plumber/Gas Engineer to join them in this exciting permanent, full-time role based in Chiswick, West London. About the role: As a Heatin

The UK is on a mission to decarbonise and heat networks are at the centre of that transition.With strong government backing and growing client demand, the heat networks market is expanding rapidly and set to grow significantly over the next decade.Alongside this, the introduction of the Heat Networ

We are seeking an experienced Heating Engineer to join a growing team based in South West London. This role involves delivering high-quality heating solutions to residential and commercial clients across the region. You will be responsible for the installation, maintenance, and repair of heating sys

We are looking for an Assistant Plumbing and Heating Manager to play a key leadership role in driving sales growth, margin, and customer acquisition while supporting the Manager in the day‑to‑day running of this plumbing and heating department within our Builder’s Merchant in Willesden. Strong

Plumbing and Heating Engineer – Full Time (Employed). Pleasant Plumbers is an established plumbing and heating company delivering high-quality installation, maintenance and repair services across residential, luxury residential and commercial properties throughout London. Due to continued growth w

We are seeking an experienced Heating Engineer to join a growing team based in South West London. This role involves delivering high-quality heating solutions to residential and commercial clients across the region.

Bridge Recruitment is helping one of our established clients recruit an experienced Commercial Heating Engineer to join their ever-expanding team.

Job Description Heat Networks EngineerAbout the Role The UK is rapidly transitioning to low-carbon energy, with heat networks playing a key role in achieving net-zero targets.With growing demand and new regulatory standards under the Heat Network Technical Assurance Scheme (HNTAS), this is a fast-