Trabajos heating en GlasgowCrear alertas

The post holder will support excellence in learning through the preparation and delivery of high quality learning, teaching and assessment materials and by supporting learners. Key Responsibilities They will work closely and supportively with other colleagues and partners to deliver excellence in learning. The role will specifically involve: • Teaching and Assessment, • Curriculum Development, • Quality and Standards, • Student Support, • Continuing Professional Development It is mandatory for new entrants: • who do not possess the Teaching Qualification in Further Education (TQFE) or equivalent to complete the: • Teaching Essentials Programme within the first 6 months of their employment;, • Professional Development Award within 12 to 18 months; and, • TQFE thereafter in due course. • to be registered with General Teaching Council (Scotland) – provisional or full registration. This post will have a teaching remit at an agreed number of class contact hours. Skills, Knowledge and Expertise The successful candidate would be asked to work with a team to deliver and support students on the SQA SVQ Level 3 (Commercial and Industrial) Installation, Service & Maintenance and Commissioning of Building Engineering Services (Heating, Ventilation, Refrigeration and Air Conditioning, HVRAC) Courses. The post will involve the successful candidate contributing the Electrical Engineering content of the BSE HVRAC curriculum within the Faculty. Applicants should preferably hold a qualification in Electrical Engineering or BSE Service & Maintenance, the minimum of an SVQ Level 3 & 18th Edition IEE Wiring Regulations (BS7671) or have a time served apprenticeship in Building Services Engineering (HVRAC) with an Electrical bias including demonstrable practical industry experience. The post holder will be educated to SCQF Level 8; or have significant relevant experience in the specialist area as an alternative to formal qualifications; or an appropriate vocational alternative, a recognised teaching qualification and evidence of Continuous Professional Development and ideally have experience carrying out/delivering formal and/or informal training within the sector of industry. Knowledge: Demonstrable knowledge of: • Further Education in Scotland, • National priorities for education, • The skills priorities locally Skills and Competencies: • Ability to provide engaging, inclusive and high quality learning and assessment opportunities that meet diverse learning needs, • Contribute to the development of curriculum delivery, • Develop and maintain effective relationships with stakeholders, • Ability to initiate innovation and promote change, • Ability to plan effective and responsive curriculum, • Ability to undertake partnership work and raise the College’s profile externally Experience: • Electrical experience in the building services field is essential, • Ability to provide flexible and innovative approaches to the delivery of the curriculum, including the use of new learning technologies, • Possess effective ICT skills and an understanding of the role of online learning, • Previous experience of individual or group guidance/supervision in a formal or informal setting, • Relevant industrial or practitioner experience in appropriate discipline, • Teaching in a post compulsory education setting and of assessment and moderation in the context of SQA and the National Curriculum Benefits Why work at Glasgow Kelvin: • Access to a generous Pension Scheme., • A professional development review process – continuous professional and personal development., • Professional and personal development for all staff – we offer an extensive range of staff development opportunities and events to support you in your role, help you reach your full potential and plan for your future., • Cycle to Work Scheme., • Mileage Allowance – reclaimable for travel on College Business, • Employee Assistance Programme - a 24-hour service that supports your health and wellbeing., • Flexible Working and Family Friendly Policy – Flexible Working, Maternity, Parental, Paternity and Adoption Leave – enhanced entitlements., • Sick Pay – Enhanced entitlement above the national average., • Wellbeing – a range of activities to enhance and support your wellbeing, access to sports facilities and fitness activities. The closing date for receipt of completed applications is 20 March 2026. Please click on the S1JOBS APPLY button now to start your application. About Glasgow Kelvin College About Glasgow Kelvin College: Glasgow Kelvin College seeks to provide learning opportunities of the highest quality, which engages learners from the widest range of backgrounds, and supports their progression to employment or to further study. We play a vital role in providing accessible vocational and core-skills learning and you will have the opportunity help us create progression opportunities for learners and makes a positive impact on the communities we serve. We deliver high-quality programmes, from introductory to degree level, to around 15,000 students each year from three campus buildings in the North and Northeast of Glasgow and through a large network of community-based centres. The College works with partners to create inclusive progression opportunities in a vibrant and sustainable environment for our learners. Roles within the College are subject to the Protection of Vulnerable Groups Scheme and as such the successful candidate(s) will be required to make an application for membership under the Scheme. At Glasgow Kelvin College, we are committed to fostering a workforce that reflects the diverse society we serve. We believe that our strength lies in our differences, and we actively seek to attract talent from a wide range of backgrounds. Our goal is to create an inclusive environment where everyone feels valued, respected, and empowered to reach their full potential. We are dedicated to being an employer of choice by prioritising diversity, inclusion, and wellbeing. Our inclusive policies and practices ensure that every team member experiences a strong sense of belonging and can thrive both personally and professionally. We are a Disability Confident employer and guarantee to interview applicants who meet the essential job requirements. Join us at Glasgow Kelvin College and be part of a team that celebrates diversity and champions inclusion. Your unique perspective and experiences are not just welcomed—they are essential to our collective success.

Our client is a well-established UK energy engineering business who specialise in the design, installation and long-term maintenance of commercial and industrial HVAC systems. They are currently recruiting for an experienced Heating Engineer/Pipefitter to support a number of commercial and industrial projects on a full-time permanent basis. Key responsibilities include, but are not limited to: • Insta... ZIPC1_UKTJ

Job Title: Small Works Contract Manager Salary: Negotiable Dependent On Experience Location: Glasgow Job Type: Full Time, Permanent HF Group is one of the UK's leading multi-discipline building services contractors, delivering high-quality solutions across Electrical, Mechanical, Fire & Security, Telecommunications, and Automated Controls. With a legacy spanning over 3 centuries and a family culture, we consider all of our employees as part of the family and invaluable assets to our ongoing business. Our head office is in Glasgow with offices in Edinburgh, Manchester, Belfast and Aberdeen, providing services to clients across both public and private sectors throughout the UK. About The Role: As part of our continued growth, we are seeking 2 experienced and pro-active Small Works Contract Manager's to work within our Mechanical divisions, 1 x Glasgow and 1 x Edinburgh. The successful candidates will oversee the delivery of reactive maintenance and small works projects across our HVAC portfolio. These roles are responsible for managing day-to-day operations, co-ordinating engineers, ensuring compliance, and delivering high-quality service to clients. These are hands-on leadership roles and are ideal for candidates who can drive safe, efficient and productive environments. Responsibilities include but are not limited to: • Managing and coordinating reactive HVAC service calls and small works projects, • Supervising and supporting field engineers, ensuring timely completion of jobs, • Overseeing scheduling, resource allocation, and job prioritisation, • Ensuring compliance with health & safety regulations and industry standards, • Liaising with clients to provide updates, resolve issues, and maintain strong relationships, • Monitoring performance, budgets, and KPIs to ensure efficient service delivery, • Preparing reports and documentation for completed works, • Monitoring client portals to track job progress, updates, and compliance requirements, • Proven experience in Plumbing & Heating management, ideally within reactive maintenance and small works area of expertise, • Strong technical knowledge of HVAC systems and industry standards, • Excellent organisational and leadership skills, • Ability to manage multiple projects simultaneously under tight deadlines, • Strong communication and client-facing skills, • Relevant qualifications in HVAC, Plumbing and or Gas, • Competitive Salary, • Car Allowance, • Death in Service Scheme, • Private Medical Care, • Critical Illness Cover, • Opportunities for career progression and professional development Applications close on Friday, 13th March 2026, if you have not heard from us within 4 weeks of the closing date, please assume your application has been unsuccessful on this occasion. Previous candidates need not apply. HF Group is an equal opportunity employer, committed to fostering a diverse and inclusive workplace. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the experience or relevant job titles of; Small Works Manager, Small Works, Small Works Contract Manager, Operations Manager, Small Works Building Contracts Manager, Small Works Construction Manager, HVAC, Plumbing Operative, Plumbing Manager, Heating Management may also be considered for this role.

Company Morgan Hunt are currently working exclusively in partnership with the University of Glasgow for the appointment of a Building Services Engineer (Mechanical) in their facilities services department. In this key role, you'll provide professional expertise in the operation, maintenance, and development of the University's mechanical infrastructure - ensuring their estate remains safe, efficient, and sustainable.Role • Provide technical leadership and advice on all aspects of mechanical building services, including heating, cooling, ventilation, gas, water, and control systems., • Support the planning and delivery of maintenance, refurbishment, and upgrade projects across the estate., • Ensure compliance with statutory and University safety standards, particularly for gas, water hygiene, and mechanical systems., • Contribute to the development and implementation of policies and procedures that promote best practice and sustainability., • Proven experience in building services, facilities, or estates management within a complex environment., • Strong technical expertise in mechanical systems operation, maintenance, and statutory compliance., • Excellent problem-solving, communication, and leadership skills., • A commitment to sustainability, digital innovation, and continuous improvement. Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.

I'm working with a busy Glasgow based main contractor as they look to add an experienced Building Services Manager to their team. They have a healthy pipeline of work secured throughout the Central Belt, spanning retail, education, healthcare, industrial, commercial, and more, offering long-term stability and exposure to diverse, high-quality projects. As Building Services Manager, you will play a key role in ensuring all MEPH elements of each projects are delivered safely, efficiently, and to the highest standard. You will be responsible for, but not limited to: • Coordinating and appointing Mechanical, Electrical, Plumbing & Heating subcontractors., • Supporting and overseeing the commissioning process., • Providing technical guidance to project and design teams., • Ensuring compliance with M&E standards, regulations and best practice., • Driving collaboration between internal and external stakeholders to achieve successful project outcomes. To be considered for this role, you should have: • Proven experience in a mechanical and/or electrical capacity within the construction industry, preferably main contracting., • Strong understanding of M&E principles, design, installation and commissioning., • Excellent communication and stakeholder-management skills. In return, you will receive: • Competitive salary and benefits package., • Supportive working environment with a strong focus on professional development., • The chance to work on a variety of new-build and refurbishment projects across the Central Belt. If you’re a Building Services Manager looking for a new challenge with a busy and reputable contractor, I'd love to hear from you! Legal Information: \nWe act as an employment agency for permanent work and as an employment business for temporary work. \n For roles in the UK, applicants must be eligible to live and work in the UK. \n We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.

Your new company Our client is looking for a Mechanical Technician (Gas Engineer/HVAC) to join their team. Based in Glasgow/Ayr. 21.05 per hour PAYE. Your new role You'll carry out planned and reactive maintenance on heating, ventilation, air conditioning, and plumbing systems. Duties include: • Fault-finding and repairs on mechanical systems, • Supporting installation and upgrade projects, • Operating BMS controls, • SVQ Level 3 / HNC in Mechanical Services (Building Services) or equivalent., • City & Guilds qualification or time-served apprenticeship in a relevant trade., • Strong experience in heating systems and mechanical maintenance., • Knowledge of HVAC systems and plumbing services., • Competitive salary, long term work. If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Facilities Manager 6 month contract Hybrid Glasgow 175 per day Harvey Nash's public sector client is seeking an experienced Facilities Manager to oversee the day‑to‑day management, maintenance, and health & safety operations of a busy office site. You will play a key role in promoting a safe, inclusive workplace and ensuring the building operates efficiently and compliantly. Key Responsibilities: • Manage daily facilities operations and oversee building maintenance activities., • Work closely with contract maintenance providers and procurement teams., • Conduct regular inspections, respond to maintenance requests, and prioritise tasks., • Coordinate external contractors for repairs, upgrades, and planned works., • Ensure compliance with health & safety legislation and conduct audits and risk assessments (e.g., fire safety)., • Maintain systems including heating, alarms, and security equipment., • Monitor budgets and ensure value for money across contracts., • Provide clear health, safety, and facilities guidance to leadership and colleagues., • Develop staff communications on building updates and workplace wellbeing., • Strong background in a facilities management role., • Managing contract maintenance providers., • Coordinating planned and reactive maintenance., • Excellent written and verbal communication skills, with the ability to simplify technical information., • Formal FM or H&S qualification (NEBOSH/IOSH).

Company Morgan Hunt are currently working exclusively in partnership with the University of Glasgow for the appointment of a Building Services Engineer (Mechanical) in their facilities services department. In this key role, you'll provide professional expertise in the operation, maintenance, and development of the University's mechanical infrastructure - ensuring their estate remains safe, efficient, and sustainable. Role • Provide technical leadership and advice on all aspects of mechanical building services, including heating, cooling, ventilation, gas, water, and control systems., • Support the planning and delivery of maintenance, refurbishment, and upgrade projects across the estate., • Ensure compliance with statutory and University safety standards, particularly for gas, water hygiene, and mechanical systems., • Contribute to the development and implementation of policies and procedures that promote best practice and sustainability., • Proven experience in building services, facilities, or estates management within a complex environment., • Strong technical expertise in mechanical systems operation, maintenance, and statutory compliance., • Excellent problem-solving, communication, and leadership skills., • A commitment to sustainability, digital innovation, and continuous improvement. You will receive a salary of 41,064 - 46,049 and enhanced benefits such as 41 days holiday and 14.5% employer pension contribution. WFH is also a possibility for report writing etc. Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.

Company A very successful independent MEP & Sustainability consultancy with a strong presence across the UK. A premium brand in the industry, with a solid track record of project delivery across sectors such as Healthcare, Education, Data Centres, Leisure and more. They are currently seeking an experienced mechanical candidate at either Principal or Associate Engineer level to join their modern, open plan Glasgow city centre office. Role • Lead the design and development of mechanical building systems including HVAC, ventilation, heating, cooling, and domestic water services., • Prepare engineering calculations, system layouts, equipment sizing, and technical specifications., • Support senior engineers in delivering projects from concept design through detailed design and construction stages., • Mentor junior and graduate engineers., • Manage client relationships on assigned projects., • Conduct site visits, inspections, and surveys to assess existing systems and monitor installation works., • Coordinate with architects, structural engineers, electrical engineers, and external consultants., • Ensure designs comply with local building codes, standards, and sustainability requirements. Qualifications / Experience • Bachelor's Degree in Mechanical Engineering / Building Services, • Chartered Engineer status or working towards chartership, • 5-10+ years' experience in mechanical building services design (depending on seniority level)., • Proven experience delivering HVAC and public health systems for commercial, residential, healthcare, education, or mixed-use projects., • Strong understanding of local and international building codes, regulations, and sustainability standards., • Experience working through all project stages: concept, detailed design, tender, and construction., • Demonstrated ability to coordinate with multidisciplinary teams., • Experience in reviewing contractor submittals, shop drawings, and commissioning processes., • Client-facing experience and ability to attend technical meetings. Benefits • 25 days holiday + publics, • Hybrid working, • Enhanced pension, • Yearly salary reviews, • Bonus scheme, • Company away days, • Access to training academies Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.

Northbound Projects are looking for an experienced.We deliver residential renovation projects across.HMOs, serviced accommodation setups and property developments.First and second fix plumbing on refurbishment projects.Boiler installations, heating system upgrades and gas safety work.Pipework altera

Company Description SVM Glasgow, an employee-owned engineering design services consultancy, is a leader in the specialised E&P/M&E design market within the rail industry. With over 25 years of expertise, the company delivers high-quality design solutions for complex railway systems, including earthing and bonding, signalling power distribution, SISS, lighting, HVAC, and public infrastructure. Headquartered in Glasgow, SVM Glasgow serves clients across the UK, from Scotland to the Southeast of England, providing innovative and sustainable engineering solutions. Committed to the professional development of its workforce, SVM Glasgow fosters a collaborative and progressive environment, empowering employees to thrive. Role Description This is a full-time, predominantly site-based role, working out of our Glasgow HQ for a Railway Electrician/Site Engineer. The successful candidate will be responsible for conducting electrical surveys, in support of our design team. Key responsibilities include obtaining source information (use of MFT), applying load and power quality analysers, conducting comprehensive reviews of electrical distribution, recording data and creating sketches/SLD's to support design. This role will NOT cover install. Survey works will predominantly be undertaken on railway and industrial locations/installations throughout the UK, typically ranging from the review of: • DNO supplies (including obtaining EFLI/PSCC), • Principal Supply Points (full review of electrical infrastructure, incl. earthing), • Signalling Power (650V Feeders), • Points Heating, • Lineside Assets, • Earthing/Bonding, • Station/Building Services (including lighting, emergency lighting, containment, power, SISS assets, mechanical plant) Candidate Essentials • Qualified Electrician, with rail knowledge, • Full UK driving licence, • Experience in reviewing and understanding technical electrical drawings, • PTS, • Level C (desired), • Time Management - ability to plan site visits, manage time and input to safety documentation/create RAMS, • Computer skills - ability to download and present survey data, • Available for surveys UK-wide (working away), • Follow stringent D&A policy

Principal Mechanical Engineer Glasgow About us Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, electric vehicle salary sacrifice scheme, stock options, and up to 30 days of annual leave. Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. About the role We have a brand-new opportunity for a Principal Engineer to join our Mechanical team in Scotland. The role will be based in Glasgow. It's an exciting time to join our teams in Scotland. Our Glasgow office was established in 2016 to provide a local presence on our projects. It now houses an abundance of key sector expertise and knowledge that supports projects across the UK. The recent opening of our Edinburgh office represents our desire to forge even stronger relationships with our clients in Scotland, by providing a local presence for our East Coast-based projects. As a Principal Engineer, you will be responsible for supporting and delivering designs for a range of project types and sizes. You will work within a multidisciplinary team of engineers and support staff delivering a consistent high-quality service for clients, ensuring that repeat and new business opportunities are developed and profitability is achieved. In this key and varied role, you can expect to: • Be responsible for dealing successfully with Clients and other professionals to foster and maintain good relationships and create future opportunities., • Promote the full range of services offered by Hoare Lea and contribute to bid preparation., • Define and agree brief with Client, take ownership and consistently deliver profitable schemes., • Lead larger scale schemes and co-ordinate all disciplines being the main Client point of contact throughout a project., • Support in developing and leading a high-performing local team and contribute to staff development., • Manage and prioritise the workload of a project team including specialist groups and effectively delegate, manage and check work undertaken by others., • Monitor project expenditure and report cost and resource requirements to the management team., • Ensure quality standards and technical accuracy is delivered and manage and mitigate risks to business. About you To be successful in this role you’ll need: • Proven experience working as a Mechanical Engineer or closely related role, with a track record delivering on a variety of complex projects., • Understanding of all mechanical services including heating, ventilation and air conditioning., • Experience working in a multi-disciplinary environment, with excellent communication skills with both internal and external clients, and a team-based work approach., • Use of relevant software/tools such as Revit and AutoCAD., • Self-awareness, an open mind, and a spirit of generosity., • Conversant with relevant British Standards., • Consultancy experience., • Previous consultancy experience, you will appreciate the importance of complementary specialisms such as acoustics, fire engineering and computer modelling in the design of buildings and be adept at analysing and interpreting their impact on your work. How to apply To apply simply complete a CV profile and submit your application, or for further information please contact If shortlisted, one of our recruitment team will be in touch to arrange a introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. Adjustments and accommodations If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. Data privacy We have updated our terms and conditions for candidates, click here to find out more. Recruitment agencies We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list.

I'm working with a busy Glasgow based main contractor as they look to add an experienced Building Services Manager to their team. They have a healthy pipeline of work secured throughout the Central Belt, spanning retail, education, healthcare, industrial, commercial, and more, offering long-term stability and exposure to diverse, high-quality projects. As Building Services Manager, you will play a key role in ensuring all MEPH elements of each projects are delivered safely, efficiently, and to the highest standard. You will be responsible for, but not limited to: • Coordinating and appointing Mechanical, Electrical, Plumbing & Heating subcontractors., • Supporting and overseeing the commissioning process., • Providing technical guidance to project and design teams., • Ensuring compliance with M&E standards, regulations and best practice., • Driving collaboration between internal and external stakeholders to achieve successful project outcomes. To be considered for this role, you should have: • Proven experience in a mechanical and/or electrical capacity within the construction industry, preferably main contracting., • Strong understanding of M&E principles, design, installation and commissioning., • Excellent communication and stakeholder-management skills. In return, you will receive: • Competitive salary and benefits package., • Supportive working environment with a strong focus on professional development., • The chance to work on a variety of new-build and refurbishment projects across the Central Belt. If you’re a Building Services Manager looking for a new challenge with a busy and reputable contractor, I'd love to hear from you!

Full-time, Mon–Thu 8:00–17:00, Fri 8:00–16:00.Healthcare, Education, Commercial, Defence, Hospitality, and District Heating sectors.Lead all aspects of mechanical projects as.Manage internal teams, subcontractors, and client communications to guarantee smooth delivery.Implement safety and qual

About the Company Trine Energy is a UK based early stage startup developing products for transmission of electrical power (1MW+) using power of fiber (PoF) as the core technology. PoF is already in use in many industries. However the power used in those applications are in milliwatts. Our power transmission target is orders of magnitude higher. It is a challenging yet exciting problem to solve. We are working on the hypothesis that the production of power is a solved problem. Solar and wind based energy production has been rapidly scaling since the start of the century. In fact there is too much generation of solar and wind power in many European countries leading to curtailment and negative spot price of electricity. Renaissance of fission nuclear reactors and the advancements in fusion means there will be no shortage of electrical power. The challenge will be to distribute that power at a national and global scale. Today, the only option of distributing electrical power over distance is the power grid. It works, but just. It is a super old technology. It takes immense effort to build or expand, and is costly to maintain. According to various studies, ~$1 Trillion of annual investment is needed globally to upgrade and expand the grid networks to reach net zero target by 2050. Governments don’t have fiscal capacity to make such investments. It has not seen any real innovation for a very long time and there is none on the horizon to significantly reduce the cost. It gets unstable when there is too much intermittent power in the mix, which goes against the global drive for energy transition. It is fragmented, and has no global scale. Laser and fiber optic, in comparison, are modern technologies, enjoying rapid innovation. Both are highly flexible products. They have many interesting properties that electricity and power cables don’t have. They can be produced in significantly higher volumes and are easy to deploy. Their cost and performance are improving at Moore’s law scale. This opens the opportunity for us to build products and become an alternative to specific use cases that are easier to develop and implement in the near term, such as providing power redundancy using short distance transmission (<5km) to critical infrastructure such as defense systems and data centers. It is also possible to deliver electrical power as thermal energy for commercial and industrial heating. The long term goal is to create a global network of power, much like the internet, where producers and end users can connect instantly and seamlessly using our technology. The products that solve the energy distribution problem at a global scale have the potential to define a new industry. Our plan is to combine technologies from different fields of science and engineering such as high power diode and fiber lasers, specialised fiber optic, power over fiber, and thermal photovoltaic cells to achieve the goal. By using technologies that are already invented and commercialised, and pushing the boundaries of engineering and finance to create a product that solves one of the biggest energy transition bottlenecks, is a mission worth pursuing. About the role The Photonics Engineer is the engineering lead for high‑power optical delivery at Trine. You will own how multi‑kilowatt to megawatt‑class optical power is generated, guided through fibers and cables, and delivered reliably over 1–100 km. This is a hands‑on, system‑facing role that bridges simulations, suppliers, and early hardware. • Own the high‑power optical delivery path: define fiber types (MMF, LMA, PCF, HCF), core sizes, fiber counts per cable, and operating points for CW power over long distances., • Translate optical and multiphysics simulation results into practical design rules: power per fiber, safe operating areas, bend and routing limits, splicing strategy, and safety margins., • Design and iterate fiber bundle and cabling concepts for underground/undersea deployment, balancing attenuation, thermal limits, reliability, installation, and maintenance., • Specify, evaluate, and qualify lasers and fiber components from OEMs and fiber manufacturers; define technical requirements and compare architectures against performance, operational, and cost KPIs., • Prototype and test early subsystems (delivery rigs, test fibers, connectors, sample cables), define test plans, and feed measurements back into models and design decisions., • Work closely with product, research, and simulation colleagues to align the delivery architecture with near‑term use cases (defence redundancy, data centers, industrial heat) and the scaling roadmap., • Create clear documentation of architectures, assumptions, trade‑offs, and test results that can be shared with suppliers, partners, and future team members. What we are looking for in the candidate • B.E./Tech, M.E/Tech, MSc or PhD in Physics, Photonics, Optical Engineering, or a closely related field., • Hands‑on experience with high‑power fiber delivery: large‑core or specialty fibers (e.g., MMF, LMA, PCF, HCF) at ≥100 W CW, ideally into the kW range., • Solid understanding of nonlinear and damage mechanisms in fibers (e.g., SRS, SBS, thermal damage, fiber fuse) and how they scale with power, length, and core size., • Experience configuring or integrating industrial diode or fiber lasers and their delivery fibers (end caps, collimators, connectors, safety interlocks)., • Working proficiency with Python and at least one simulation environment (in‑house codes, COMSOL, Ansys, or similar) for analyzing propagation and basic thermal effects., • Comfort making design trade‑offs with incomplete data, iterating quickly, and owning decisions in a small, distributed startup team., • Experience in specialty fiber development or industrialisation (e.g., hollow‑core, PCF), including collaboration with fiber drawing facilities or process engineers., • Experience taking fiber or laser technologies from lab concept towards standardised product: defining specs, qualification tests, and working with suppliers to meet them., • Exposure to underground/undersea cable concepts, deployment, or reliability for optical or power cables., • Experience with coupled optical–thermal–mechanical models for high‑power components and systems., • Previous work with defence, energy, or data‑center applications that demand high reliability and robust safety engineering. What we offer • Remote‑first role, open to UK and non‑UK candidates. Full‑time, with the option to start part‑time and ramp up., • Opportunity to define how multi‑MW optical power is moved through fibers at scale and to shape a new class of energy‑distribution infrastructure.

BMSL require Commercial Heating Engineers for a 3 month duration in Glasgow. Duties include all aspects off Heating installation work on a commercial - industrial project. Mid week overtime is being worked. An up to date cscs card is required on this position...

HVAC Engineer (Daikin / Mitsubishi) £48,000 - £52,000 (OTE) + Training + Company Pension Scheme + Company Benefits + Progression + Company Vehicle + Fuel Card + Overnight Allowance + Overtime + Private Healthcare Manchester Are you an Installation / Service Engineer with experience working on HVAC systems looking for an exciting new opportunity to join a rapidly growing organization who are offering in house training and progression opportunities into senior roles? On offer is an exciting new opportunity where you will become a fundamental asset to the business. You will travelling to client sites where you'll perform troubleshooting, maintenance and repairs on various systems, provide technical support and communicate with clients and team members to ensure a high level of service and operational efficiency. This Company have been established for over two decades and have built a fantastic reputation within the industry. They provide comprehensive technical services such as air conditioning, heating systems, ventilation, electrical services and plumbing. They specialize in designing, maintaining and installing these systems for the retail, industrial and commercial sectors. This role would suit a Service Engineer who has experience working on HVAC systems looking to progress and grow with a well-established company who will give you the platform to succeed from the off. The Role: • Travel to client sites, • Perform maintenance, troubleshooting and repairs on various systems, • Covering London Patch, • Service, PPM and reactive maintenance, • Experience working on HVAC systems Keywords: HVAC, Service, Engineer, Maintenance, Repairs, Installation, London, Heating, Ventilation, Field, Air Con, Commercial, Residential Reference Number: BBBH23992 If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

Senior Mechanical Project Manager | M&E Building Services | South Coast / M3 Corridor | £65,000£80,000 + Car / Allowance + Bonus This is a fantastic opportunity for an experienced Mechanical Project Manager to join a respected M&E Building Services contractor delivering mechanical installation projects across the South Coast and along the M3 corridor The company is a well-established and highly regarded M&E Building Services contractor with a strong reputation for delivering high-quality mechanical installations across commercial, education, healthcare, residential, and specialist environments. With a strong pipeline of secured work and continued business growth, they are now looking to strengthen their project delivery team with the appointment of an experienced Senior Mechanical Project Manager. Projects typically range from small works through to larger multi-million pound mechanical building services installations and include HVAC systems, plant rooms, pipework installations, ventilation systems, heating systems, public health services, and associated mechanical infrastructure. This role offers the opportunity to take ownership of projects from pre-construction through to completion while working closely with clients, consultants, commercial teams, subcontractors, and site delivery teams. Role Responsibilities • Managing mechanical building services projects from pre-construction through to completion, • Overseeing project programmes, ensuring works are delivered on time and within budget, • Coordinating mechanical subcontractors, specialist suppliers, and installation teams, • Working closely with commercial teams to manage project costs, variations, and financial performance, • Managing health & safety compliance and ensuring works are delivered in line with industry standards, • Attending client and consultant meetings throughout the lifecycle of projects, • Leading and supporting site delivery teams to ensure successful project delivery, • Monitoring installation quality and ensuring compliance with design specifications Key requirements include: • Proven experience operating as a Mechanical Project Manager or Senior Mechanical Project Manager, • Strong technical knowledge of HVAC systems, pipework installations, ventilation systems, plant rooms, heating systems, and public health services, • Experience delivering mechanical building services installations from pre-construction through to final handover, • Ability to manage subcontractors, consultants, clients, and internal project teams, • Strong programme management and organisational skills, • Excellent communication and leadership ability, • £65,000 £80,000, • Car or Car Allowance, • Bonus Scheme, • Pension, • Holiday Allowance JBRP1_UKTJ

Reward and Benefits on Offer; • Competitive salary, • Generous annual leave allowance, • Pension contribution scheme, • Private healthcare scheme, • Prestigious clients and varied projects, • Joining a stable and growing organisation MTrecs prestigious engineering client is looking to recruit a new Mechanical Building Services Design Engineer to join their growing organisation. The successful candidate should be experienced, self-motivated, and will be responsible for assisting the companys clients with design projects. The projects generally have one to two months durations and are varied in nature, giving the appointed engineer an ever-changing and interesting range of design duties. With a clear-cut progression pathway to Principal Engineer and beyond, this is a fantastic opportunity to take that next step in your career. The Job Youll Do; • Provide experience and assistance for the companys design projects., • Establish working relationships with internal and external stakeholders, as well as the companys clients., • Contribute to meetings with clients, the project team, contractors and other stakeholders., • Undertake and deliver high quality detailed engineering design for Mechanical building services, including calculations, analysis, schematics, drawings, diagrams, models, specifications, and other related documents., • Projects include: Heating Systems, Domestic Hot and Cold-Water Systems, Natural Gas Systems, Ventilation Systems, Comfort Cooling and Air Conditioning System, Fire Suppression and Sprinkler Systems, Plant Room Design, • Degree qualified in a relevant Engineering subject, or equivalent industry experience, • 5-years relevant experience as a minimum., • Good knowledge of relevant legislation, standards, regulations, guides, and all-round good practice., • Extensive knowledge of the Building Services industry, • Able to work independently without supervision, • Availability and willingness to travel if and when required JBRP1_UKTJ

Industrial Refrigeration Commissioning Engineer Manchester £75,000 per annum A global manufacturer of Chillers and Process Cooling equipment. They provide a comprehensive suite of HVAC solutions, from design and supply to installation, commissioning and maintenance for offices, hospitals, data centres and other large facilities. This allows them to help clients improve energy efficiency and operational performance while reducing carbon emissions and meet regulatory requirements. Key Responsibilities: Commission industrial refrigeration systems (e.g. ammonia, CO2, HFC) including pressure testing, evacuation, charging, and system start-up Perform functional testing and calibration of compressors, valves, controls, safety devices, and BMS interfaces Diagnose and rectify faults during commissioning to ensure safe, efficient system performance Verify compliance with design specifications, PED requirements, and F-Gas / environmental regulations Produce commissioning documentation, test records, and support client handover and training Package: £60,000 per annum Overtime (1.5x or 2x), door to door & on-call pay 32 days annual leave Pension scheme Continuous training opportunities What You'll Need: F-Gas certification Commissioning experience Experience handling natural refrigerants (Ammonia & Co2) Full driving licence Interested in hearing more? Call Peter Caulfield on 023 9285 2310 or Email WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

Suitable for: HVAC Applications Engineer | Mechanical Proposals Engineer | HVAC Estimating Engineer | Technical Sales Engineer (HVAC) | Mechanical Applications Engineer | HVAC Estimator | Building Services Proposals Engineer | Technical Estimator Summary A specialist UK HVAC business is seeking an Internal Proposals Engineer to support the development of technical quotations and engineered HVAC solutions. The business designs and delivers bespoke HVAC systems for complex industrial and energy-related applications where performance, reliability and compliance are critical. Working closely with business development and engineering teams, this role focuses on reviewing technical enquiries, developing costed proposals and supporting the conversion of opportunities into secured projects. Role * Review incoming enquiries, specifications and tender documentation * Develop technical and commercial proposals for bespoke HVAC systems * Interpret client requirements and translate them into engineered solutions * Prepare detailed cost estimates, quotations and proposal documentation * Liaise with internal engineering teams to ensure technical feasibility * Support the sales team during the bid and proposal process Requirements * Engineering background within HVAC, mechanical engineering or building services * Experience in proposals, estimating or applications engineering within an engineering or manufacturing environment * Ability to interpret technical drawings and tender specifications * Strong attention to detail and ability to produce clear technical documentation * Good commercial awareness and understanding of costing principles Package * Salary £45,000-£55,000 * 25 days holiday + bank holidays * Company pension * Opportunity to work on technically complex HVAC projects WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

Air Conditioning Service Engineer - M4 Corridor £40,000-£50,000 + Van + Ongoing Training + Pension A well-established and growing HVAC contractor is seeking an experienced Air Conditioning Service Engineer to cover the M4 corridor. This is an excellent opportunity to join a company that genuinely invests in its engineers, offering long-term stability, structured development and clear progression opportunities. The Role As an Air Conditioning Service Engineer, you will be responsible for: * Service, maintenance and fault-finding on a range of air conditioning systems * Diagnosing and repairing system faults efficiently * Delivering high standards of workmanship and customer service * Completing service reports and compliance documentation accurately * Covering commercial sites across the M4 corridor The Package * £40,000-£50,000 basic salary (depending on experience) * Company van and tools provided * Ongoing technical training and development * Clear career progression opportunities * Company pension scheme * Full-time, permanent position Requirements * Proven experience servicing and maintaining air conditioning systems * Valid F-Gas qualification * Strong fault-finding and diagnostic skills * Full UK driving licence * Professional, reliable and customer-focused approach WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

We are currently seeking a skilled and experienced Commercial Gas Engineer for a permanent role covering the Derbyshire area. This position focuses on servicing, fault finding and repair of commercial heating systems across a portfolio of sites. This is an excellent opportunity to join a well-established contractor offering long-term stability, consistent work and the chance to work on varied commercial projects within the region. Role Overview As a Commercial Gas Engineer, you will be responsible for carrying out planned servicing, reactive breakdown repairs and diagnostic work on a range of commercial gas appliances and plant equipment. You will ensure systems are operating safely, efficiently and in full compliance with current regulations. The role will involve attending commercial sites across Derby and surrounding areas. Key Responsibilities • Servicing commercial boilers and gas appliances, • Diagnosing and repairing faults on commercial heating systems, • Carrying out reactive and planned maintenance works, • Ensuring all work complies with current Gas Safe regulations and health & safety standards, • Completing relevant certification and documentation accurately, • Valid Gas Safe registration, • Commercial ACS qualifications, • Proven experience in commercial service and repair, • Strong fault-finding and diagnostic skills, • Annual salary ranging £42,000-£45,000 + OTE, • Opportunities to increase earnings circa £50,000 OTE, • Company van and fuel card provided, • Ongoing training and development opportunities, • Stable, long-term work across the Derby area JBRP1_UKTJ

Position: Commercial Plumber Location: M3 Region Salary: £40,000 - £45,000 DOE Commercial Plumber required for our client, an award-winning HVAC company that has 6 regional offices and has been expanding since it formed over 20 years ago. They offer their customers a complete turnkey solution for the installation, service, maintenance, fault finding and repair on a range of HVAC equipment. Their client base consists of long-standing client relationships with clients such as David Lloyd Leisure, Vue Cinemas, Cineworld, Tate & Lyle, Radisson Hotels, Hilton, Malmaison & more. Commercial Plumber Salary & Benefits • Basic Salary £40,000 - £45,000 DOE, • Company Van - Optional Personal Use of the vehicle, • Profit share scheme applicable after 12 months' service - Up to £3,600 tax free, • Overtime, • 40 hour working week, travel paid after 30 mins each way, • On call allowance (1 in 4/5, £1,200 guaranteed - if called out Travel Paid door to door), • Pension, • 22 days' holidays plus bank holidays this will increase to 25 days after 5 years and 30 days after 10 years. The Commercial Plumber/Mechanical Engineer will be responsible for maintenance, reactive repairs, installations on AHU's, Heating Pumps, Chilled Water Pumps, Pressurisation units, Expansion vessels, 3/4 Way Valves & Actuators throughout Commercial properties. The Mechanical Engineer will also be expected to replace pipework, experience with pipefitting is essential. Commercial Plumber Job Requirements • Experience as a Commercial Plumber/Commercial Mechanical Engineer, • Experience working on Pumps, AHU's, associated pipework etc, • Full Driving Licence JBRP1_UKTJ

Gas Engineer Gas Engineer. A Shaftesbury, Dorset based plumbing and heating firm need a Gas Engineer to join the team. The Gas Engineer will join an award winning team specialising in commercial gas, heating and mechanical work, from reactive maintenance to planned preventative measures and large-scale projects. The Gas Engineer position is a full time on site role based in Shaftesbury, 8.00-17.00 Monday to Friday with a callout rata every 6 weeks, overtime is available. The Gas Engineer role involves the installation, maintenance and repair of gas appliances and central heating systems in both commercial and domestic settings. The Gas Engineer responsibilities include diagnosing and resolving system faults, ensuring compliance with safety regulations, and providing excellent customer service to meet client needs. The Gas Engineer will support building maintenance and collaborate with a team on mechanical and gas-related projects. The Gas Engineer will need: • Competency in Natural Gas, LPG and Central Heating systems, with expertise in installation, maintenance, and troubleshooting., • Knowledge and experience in Plumbing and Building Maintenance, with the ability to work on diverse projects., • Highly proficient in Maintenance & Repair of gas appliances and heating systems, ensuring safety and efficiency., • Strong teamwork and communication skills, with the ability to deliver excellent customer service., • Relevant industry certifications and qualifications (e.g., Gas Safe Registration)., • Previous experience in commercial gas or mechanical work is advantageous., • Valid driver's license for on-site travel as needed. The Gas Engineer paid at an hourly rate depending on experience, bonus, van, pension, holiday and overtime. Self-employed also an option but employed preferred. Proactive People is an employment agency and employment business JBRP1_UKTJ

We currently have a fantastic opportunity for a Plumbing & Heating Contracts Manager to join our clients team based out of their office near to Accrington! Our client is a well established, successful and expanding commercial plumbing & heating company looking to appoint a contracts manager to oversea it's design and build projects. We are pleased to be able to offer this role on a permanent basis. Therefore, if successful you'll be employed directly by our client on a full time, permanent contract. If your looking for a role where you are valued, there's room to grow and your rewarded for what you do, then this could be the role for you. What you'll be doing: You'll be responsible for setting up, running and completing on clients commercial plumbing and heating contracts. Majority of the work is design and build so the ideal candidate would be someone from a mechanical design and build background when it comes to plumbing and heating systems. You'll be required to: • Manage teams on the ground completing the work, ensuring work is completed to the best standard., • Review mechanical drawings to ensure client specifications have been met, it's compliant and accurate., • The ordering / supply of plant, materials and associated equipment., • Liaise with clients and internal management as to progress and flag/deal with any issues., • Ensure each project is delivered upon, on time and in budget., • Occasional site visits / client meetings., • Subcontractor management. Monday - Friday 9:00 AM - 5:00 PM. No weekend working is required. Pay: £65,000.00 - £75,000.00 per year, depending on experience + perks. Experience required: • At least 3 years as a Contracts Manager within the plumbing and heating sector, focusing on D&B projects., • Degree/HNC in Mechanical Engineering OR Building Services OR a related Discipline., • Experience managing multiple contracts, varying in size, complexity and value., • Excellent time management skills., • Excellent customer service skills., • 31 days annual leave (Inc bank holidays)., • Company car OR a car allowance., • Fuel Card., • Career progression and development., • Company pension., • Tech provided. Click 'APPLY' and we'll be in touch! JBRP1_UKTJ

Hexa operates in the construction, civils, mechanical and electrical markets. We are currently recruiting for Plumbers for an industrial project at Fawley, Hampshire. Rates, Hours, Duration £30/hr CIS/Ltd co/umbrella 9 hour days available 2 month expected duration Parking available on site The Role: Installing, repairing, and maintaining industrial pipes, valves, and fittings for water, steam, and hazardous fluids. Requirements: CSCS blue/gold skill card Basic DBS Tools Suitable heating engineer experience D&A test during induction Please apply online. JBRP1_UKTJ

Area Sales Manager Bathroom Products.Job Title: Area Sales Manager Bathroom & Heating Products.Industry Sector: Sales Manager, Bathroom Furniture, Bathroom Mirrors, Bathroom Cabinets, Showers, Enclosures, Radiators, Sanitaryware, Showertrays, Bathroom Lighting, Brassware, Retailers, Retail Showroo

Mechanical Project Manager - HVAC / Mechanical Location: M8, Central Belt corridor Base: Glasgow Salary: Competitive salary depending on experience, plus car allowance £7,800 The role: We’re recruiting a Mechanical Project Manager to lead delivery of HVAC / mechanical projects across commercial premises (managing agents, retail, offices). This is not a building-site/construction site environment — you’ll be managing live environments and coordinating subcontractors to deliver safely on time and on budget. What you’ll be doing: * Manage multiple mechanical/HVAC projects across the Central Belt (often running concurrently) * Coordinate subcontractors, materials, programmes, RAMS and site activity * Ensure compliance with CDM Regulations and H&S best practice * Oversee quality, progress, client communication and handover * Track costs and reporting (projects typically up to £750k) What we’re looking for: * 5+ years’ experience in a Project Manager role within Mechanical / HVAC * Strong knowledge across full HVAC spectrum (AC, ventilation, heating) * Confident managing multiple subcontractors and multiple live projects * Mechanical trade qualifications essential * CSCS / SMSTS not required but advantageous * Familiarity with project/technical software (e.g., AutoCAD/BIM) advantageous * Full UK driving licence Package: * Car allowance: £7,800 * Standar...

Their branch is in the Glasgow area and requires a new Assistant Branch Manager. You should ultimately be able to assist the branch manager with most aspects of how to run a successful branch. Role: Assistant Branch Manager Sector: Construction Materials / Building Supplies / Plumbing and Heating p

Commercial Gas Engineer Location: Norfolk/ Suffolk /Greater London Company With over 65 years of industry experience, our client is a leading provider of complete temperature controlled solutions, delivering expert service, installation, and planned maintenance across refrigeration and air conditioning systems. About the Role Our client is seeking an experienced Commercial Gas Engineer to join their service, installation, and maintenance team. You will deliver both planned and reactive maintenance across a range of commercial heating and hot water systems. This is a varied role covering gas, oil, plumbing, ventilation, and wider plantroom maintenance works. Key Responsibilities * Planned and reactive maintenance on commercial heating and hot water boilers * Servicing and maintenance of package burners * Testing and purging of gas installation pipework * Maintenance of associated systems including pumps, valves, fans, and controls * Domestic and commercial boiler and plant room installations * Installation using soldered, press-fit, and screwed steel pipework systems * Small-scale installation wiring and electrical fault finding * Supporting wider plantroom maintenance including plumbing and ventilation works Essential Requirements • Full clean UK driving licence, • Enhanced DBS check, • Gas qualifications (minimum required):, • Domestic: CCN1, CENWAT, CKHB1, DAH1, HTR1, • Commercial: COCDN1, CIGA1, CORT1, CPA1, DAH1, ICPN1, HTR1, TPCP1, CONGLP1PD (LPG Changeover), • City & Guilds Level 3 Plumbing (preferred minimum), • Unvented Hot Water (G3) certification, • Willingness to travel when required, • Willingness to stay away from home (with notice) Salary / Package * 45-50k + OT (55-60k) * Company pension scheme * Company-provided van, * Tools * Training & development opportunities * Overtime and call-out JBRP1_UKTJ

Full job description Operations Manager Littlehampton £32,000 - £37,000 + Training + Pension Are you an Operations Manager with experience in construction environments looking to develop your career within a supportive and rapidly growing company? This is an excellent opportunity to join a close-knit organisation that offers in-house training, career development, and a company pension. You will play a key leadership role within the Operations team for a well-established mechanical and electrical engineering company known for delivering a wide range of heating services across the commercial and industrial sectors. In this role, you will be responsible for scheduling planned maintenance, raising customer invoices, reviewing completed jobs to ensure all documentation is accurate and complete, raising purchase orders, and managing day-to-day customer requirements. This position would suit an Operations Manager with a background in construction who is comfortable working within site-based environments and is looking to progress within a company that actively invests in its people through training, development, and additional benefits. The Role • Schedule Planned Maintenance, • Raise customer invoices, • Review all jobs upon completion, • Manage day to day operations, • Raise purchase orders and maintain all documentation, • LittlehamptonThe Person, • Previous construction experience (desirable), • Operations Management experience, • Ability to build and maintain relationships, • Proficient use of technologyRef:1652236 Key Words: Operations Manager, Manager, Operations, Heating, Construction, Littlehampton, West Sussex, Brighton, Portsmouth, Worthing If you are interested in this role, click 'Apply Now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Peopleforge Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website and provided upon application. JBRP1_UKTJ

Contracts Manager (Mechanical / Building Services) £60,000 - £65,000 + Bonus Scheme + Private Medical + Progression to Senior Leadership + 27 Days Holiday + Bank Holidays + Company Vehicle + Fuel Card + Benefits Preston Are you an experienced Mechanical Contracts Manager with a strong background in plumbing and heating systems, looking to lead projects and help grow a developing mechanical division within a respected building services contractor? Do you enjoy managing projects from enquiry through to handover, working closely with clients and supply chain partners while ensuring high standards of quality, cost control and delivery? The company is a well-established M&E that is heading into it's 80th year of trading. Based in Preston, the business delivers high-quality electrical and mechanical services to local authorities, schools, universities, healthcare facilities and other public sector clients. This role would see the suitable candidate become a senior member of the mechanical department of the business, looking to onboard new business, provide supply chain support, and be responsible for the successful handover of projects. This is an excellent opportunity for a Mechanical Contracts Manager who wants to take ownership of projects, contribute to the growth of a mechanical department, and progress towards senior leadership within a stable and supportive business. The Role: • Manage mechanical projects from enquiry and tender stage through to installation, commissioning and handover, • Provide technical input and commercial feedback during tender processes where required, • Plan and programme work to ensure projects are delivered on time and within budget, • Source and manage subcontractors across mechanical installations, • Monitor project costs, valuations and variations to protect margins, • Experience as a Mechanical Contracts Manager, or similar, role within building services JBRP1_UKTJ

Junior Mechanical Project Manager | M&E Building Services | Southampton Area | £45,000 £55,000 + Car or Car Allowance + Bonus This is a fantastic opportunity for a motivated Junior Mechanical Project Manager to join a respected M&E Building Services contractor delivering mechanical installations across a wide range of commercial, healthcare, education, and industrial projects. Based just west of Southampton, the company has built a strong reputation for delivering high-quality mechanical building services installations. Their project portfolio includes mechanical packages such as plantrooms, heating and chilled water systems, ventilation, pipework, public health systems, and HVAC installations across both public and private sector developments. With a strong pipeline of work and continued business growth, they are now seeking to appoint a Junior Mechanical Project Manager who is keen to accelerate their development within a structured but hands-on project delivery environment. The Role Salary is negotiable depending on experience within the advertised range. As Junior Mechanical Project Manager you will support experienced Project Managers and Contracts Managers in the delivery of mechanical building services projects from pre-construction through to completion. The role offers excellent exposure to the full project lifecycle including procurement, installation, commissioning, and handover, providing an excellent platform for someone looking to progress into a fully-fledged Mechanical Project Manager position. You will initially assist with the delivery of projects while gradually taking responsibility for smaller mechanical installations as your experience develops. Projects range from smaller mechanical packages through to larger multi-million pound mechanical building services installations across the South Coast and surrounding areas. This is a hands-on role that will involve significant time on site working closely with engineers, subcontractors, and project teams to ensure mechanical installations are delivered safely, efficiently, and in line with project programmes. Key Responsibilities • Supporting Project Managers and Contracts Managers in the delivery of mechanical building services projects, • Assisting with procurement of mechanical plant, materials, and subcontract packages, • Coordinating site teams, subcontractors, and suppliers to ensure works are delivered in line with programme requirements, • Supporting project planning, coordination, and site progress reporting, • Assisting with the preparation and coordination of technical submissions and project documentation, • Attending site meetings and maintaining strong working relationships with clients, consultants, and subcontractors, • Supporting the commercial team with variations, valuations, and project cost reporting, • Ensuring mechanical works are delivered safely and in line with health and safety requirementsAbout You, • Experience working within the Mechanical Building Services sector for an M&E contractor or mechanical contractor, • Experience working on mechanical installations such as HVAC systems, heating systems, chilled water systems, ventilation, pipework, plantrooms, and public health systems, • Previous experience in a supervisory, site management, or junior project management role within mechanical building services, • Strong organisational and communication skills with the ability to work closely with site teams and project stakeholders, • Keen to learn and develop within a growing mechanical contractor environment, • £45,000 £55,000, • Company Car or Car Allowance, • Company Bonus, • Company Laptop and Mobile, • Pension JBRP1_UKTJ

Mechanical Estimator / Senior Mechanical Estimator | Building Services | Southampton area | £60,000 £75,000 + Car/Allowance + Bonus This is a fantastic opportunity for an experienced Mechanical Estimator to join a respected M&E Building Services contractor delivering projects from £100k to £5m. About the Company The company is a well-established M&E Building Services contractor delivering mechanical and electrical installations across the commercial, healthcare, education, industrial, leisure, and public sector environments. Known for their technical capability and consistent project delivery, the business has built strong long-term relationships with clients across the South Coast and surrounding regions. The Role As Mechanical Estimator, you will take responsibility for preparing accurate and competitive mechanical building services tenders from initial enquiry through to submission and project handover. You will price HVAC systems, plantrooms, heating systems, chilled water systems, ventilation, pipework, and public health services across a varied portfolio of building services projects, working closely with Directors and Project Managers to ensure tenders are commercially robust and technically sound. Projects typically range from £100k through to larger multi-million-pound installations across the commercial, healthcare, education, industrial, and fit-out sectors. This role would suit candidates currently working as: Mechanical Estimator, Senior Mechanical Estimator, Mechanical Building Services Estimator, M&E Estimator, or Mechanical Pre-Construction Estimator. Key Responsibilities • Preparing detailed mechanical building services tenders from drawings and specifications, • Producing accurate take-offs and cost plans, • Pricing HVAC systems, plantrooms, heating, ventilation, chilled water, pipework, and public health installations, • Obtaining and analysing supplier and subcontractor quotations, • Reviewing technical documentation and identifying value engineering opportunities, • Undertaking risk analysis and commercial review of tender submissions, • Supporting tender presentations and internal commercial reviews, • Working closely with project delivery teams to ensure smooth handover following tender successAbout You, • Proven experience operating as a Mechanical Estimator within an M&E Building Services contractor environment, • Strong technical knowledge of HVAC, pipework, plantrooms, heating, and ventilation systems, • Experience pricing building services projects across sectors such as commercial, healthcare, industrial, or education, • Strong understanding of pre-construction, tendering processes, and commercial project delivery, • Experience using estimating software such as Ensign or similar platforms would be advantageous, • Commercially astute with strong attention to detail and the ability to produce accurate tender submissionsRemuneration Package Mechanical Estimator, • £60,000 £75,000, • Company Car or £5,000 Car Allowance, • Profit Related Bonus Scheme, • Workplace Pension JBRP1_UKTJ

The role is offering a company van and fuel card, plus overtime and call out opportunities and additional perks and benefits, 25 days of holiday, plus bank holidays, sick pay, life assurance. We are currently seeking a skilled and reliable Mobile Electrician to join a leading company. What the successful Mobile Electrician can expect: • Electrical test and inspection, • Reactive repairs and fault finding, • PPMs, • Full electrical rewiring, • Electrical installation to kitchens and bathrooms, • Universities, • Social Housing, • Council buildings, • Office buildings, • 18th Edition Wiring Regulations qualification, • NVQ Level 3 or equivalent electrical qualification, • 2391, • Location: Mobile covering Hampshire / Surrey / Sussex, • Working across these locations, will be allocated 1 or 2 weeks on that contract JBRP1_UKTJ

Suitable for: Mechanical Project Engineer, HVAC Project Manager, Ventilation Project Engineer, Building Services Project Engineer, M&E Project Engineer, Mechanical Project Manager Overview An established engineering services provider operating in the offshore and energy sectors is seeking a skilled Project Engineer to lead multi-discipline projects from concept through delivery. The business delivers specialist HVAC, ventilation, and mechanical solutions for offshore platforms and energy infrastructure, working with contractors, consultancies, and end users. This role exists to manage complex projects efficiently, ensuring technical excellence, compliance, and on-time execution. You will take ownership of engineering projects, coordinating all technical and delivery aspects. Responsibilities include producing detailed designs using AutoCAD, developing project documentation, maintaining Bills of Materials (BOMs), and verifying component and material compliance. You will peer-review engineering work, support tender documentation, and liaise closely with clients, suppliers, and internal teams. Projects will cover HVAC, ventilation, smoke control, and mechanical building services in offshore and industrial energy environments. Requirements * Proven experience in multi-disciplinary engineering project roles within HVAC, ventilation, or offshore energy sectors * Strong technical knowledge of air handling systems (AHUs, FCUs, ductwork), chillers, VRF/VRV, and building services controls (BMS, LEV) * Proficiency in AutoCAD and modern engineering design tools * Experience producing and managing technical documentation, drawings, specifications, and BOMs * Knowledge of offshore or industrial standards, compliance, and certification processes * Excellent communication skills and ability to collaborate across multi-functional teams * Organised, proactive, and detail-focused approach Package * Salary: £45,000-£55,000 per annum * Company Pension * 25 days holiday + bank holidays * Role involves travel across the UK and offshore locations as required WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

Apply below after reading through all the details and supporting information regarding this job opportunity. Field Service Engineer (Fire / Security) £35,000 - £40,000 (OTE £45k) + Local Patch + Progression + Training + Overtime + Early Finish Friday + 33 Days Holiday + Company Van Glasgow, Scotland Are you a Field Service Engineer or similar from a Fire Alarm / System, Security OR CCTV background, looking for a local patch with great work life balance in a multi-national business with an early finish Friday and opportunities to boost your earnings? In this role you will be servicing Fire Alarm / System, Security and CCTV systems across a range of client sites from Solar, NHS, Private and Commercial sites. You will be working a local patch and will have training and development opportunities. This company are an energy and facilities services provider that designs, installs, and maintains low-carbon heating, cooling, and building systems while helping organisations improve efficiency and reduce emissions. This role would suit a Field Service Engineer or similar from a Fire Alarm / System, Security OR CCTV experience, looking for a stable and secure role with great work life balance. The Role: • Maintain and service Fire, Security and CCTV systems, • Covering an Edinburgh, Perth, Dundee patch, • Training on manufacturing specifics & other areas without experience, • Field Service Engineer or similar

Our client is a well-established UK energy engineering business who specialise in the design, installation and long-term maintenance of commercial and industrial HVAC systems are currently recruiting for an experienced Mechanical Foreman to support and supervise mechanical installation works across a number of commercial and industrial projects. The successful candidate will oversee site based mechanical installation teams delivering plant room installations, system upgrades and full heating system installations within commercial and industrial environments. Key Responsibilities • Supervising and coordinating mechanical installation teams on site, • Overseeing installation and replacement of commercial and industrial heating systems, • Managing plant room installation and refurbishment works, • Supervising installation of HVAC plant and associated pipework, • Working with equipment including boilers, pumps, pressurisation units, expansion vessels, chillers and associated pipework, • Ensuring all work is carried out in line with project specifications, drawings and schedules, • Reading and interpreting mechanical drawings and technical schematics, • Monitoring site progress and reporting to project managers and engineering teams, • Ensuring compliance with health and safety regulations, site procedures and industry standards, • Maintaining high standards of workmanship and site organisation, • Coordinating with engineers, project managers and subcontractors to ensure smooth project delivery Essential Requirements • Proven experience working within commercial or industrial mechanical installations, • Previous experience in a supervisory or foreman role within mechanical or HVAC projects, • Strong knowledge of plant room equipment and commercial pipework systems, • Experience installing equipment such as boilers, pumps, pressurisation systems, chillers and HVAC plant, • Ability to read and interpret mechanical drawings and specifications, • Good understanding of site health and safety and compliance requirements, • CSCS/SSSTS/SMSTS qualified, • Full UK driving licence, • Must be willing to travel and work away from home when required JBRP1_UKTJ

The Package * Salary: £36,000 £45,000 per year (dependent on experience) * 45-hour working week * Company van provided * Tools and uniform supplied * Fuel card included * Ongoing training and development opportunities * 23 days holiday plus bank holidays The Person The ideal candidate will be a skilled and reliable pipe fitter with a flexible approach to both installation and maintenance work. Key requirements: * Proven experience in commercial pipe fitting * Experience in plumbing and heating systems installation and maintenance * Willingness to undertake both installation and maintenance duties * Ability to work independently and as part of a team * Strong work ethic and attention to detail * Good understanding of health & safety practices The Role An opportunity is available for an experienced Commercial Pipe Fitter to join a busy and growing team, working across MOD sites. Key responsibilities include: * Installation of commercial plumbing and heating systems * Carrying out maintenance and repair work as required * Working across a variety of MOD sites * Ensuring all work is completed safely and to a high standard Location: SP9 7QD (within a 20-mile radius) JBRP1_UKTJ

Mechanical Engineer (Level 3) Location: HMP Swaleside Brabazon Road, Eastchurch. Isle of sheppy ME12 4AX Salary: £43,177.30 Contract: Full time | Permanent We are seeking an NVQ level 3 qualified Plumber to join our team at HMP Swaleside, a CATEGORY C & Male PRISON - as a Mechanical Engineer. Join a team that is more than just a group of colleagues - we work Monday to Friday as a supportive and driven family, working together to create a safe and nurturing environment. HMP Swaleside runs like a self-contained TOWN, it takes hundreds of people to keep it functioning, and as the Facilities Maintenance Team we are committed and driving the smooth and safe operation, like a heart that pumps blood through the body, everything we do impacts every prisoner, employee, and visitor, and wider to the families and community. As a Mechanical Engineer you will have the opportunity to work alongside experienced and passionate colleagues who vary from Plumbers, Electricians, Carpenters, Painters, to Cleaners, and Administrators, and others, who are all dedicated to making a positive difference, providing a safe and secure environment for all. If you are looking for a role where you can use your skills to create a better future for others, we encourage you to apply for this compelling opportunity and join us in our mission to promote rehabilitation and positive change and be part of a team that truly makes a difference. We are a Ministry of Justice business and provide critical and time-bound services to HMPPS, and are looking for a Plumber to join us as a Mechanical Engineer with one of the following NVQ Level 3 qualifications and combination of skills: • C&G 6189 Plumbing and domestic heating, • C&G 5962 certificate in Plumbing (Advanced craft), • C&G 6019 Mechanical Engineering services (plumbing), • C&G 6018 heating and ventilation installation, • C&G 6129 certificate in Plumbing, • C&G 214 Engineering systems maintenance, • C&G 6188 Heating and ventilating, • C&G 6088 certificate in heating and ventilating, • C&G 6032 the advanced craft certificate in plumbing, • EAL Diploma in Plumbing and Heating, • Experience working on commercial or industrial heating, water or building service systems., • Unvented water heater vessel course G3 - Highly desirable, • Two years' experience working in a role as a plumber or equivalent, • Be familiar with and able to work to Water supply regulation and Control of Legionella L8 requirements, • Good working knowledge of planned preventive maintenance operations, • Good working knowledge of relevant health and safety requirements JBRP1_UKTJ

In a Nutshell We have an exciting opportunity for a Technical Manager to join our team within Vistry North Midlands, at our Castle Donington office. As our Technical Manager, you will take the lead on project managing the technical matters relating to projects within the region. You will demonstrate a pro-active approach to design development, working within a team environment from the project's inception through to its completion. You will be tasked with the control of the complete design process involving the management of consultants, liaison with the relevant statutory and local authorities and other internal and external stakeholders as necessary. To ensure the designs complies to all necessary legislation, associated standards and Vistry Group specification, policy, and procedures. Your role requires an excellent base level of Health & Safety, Environmental and Technical knowledge, including a good working knowledge of the Highways & Drainage, Building Regulations, NHBC Standards, Planning, and Affordable Housing. We value in-person collaboration and team culture, but we're also committed to supporting flexible working where possible. We encourage you to raise any specific requirements during the interview process so we can explore how this could be accommodated. Let's cut to the chase, what's in it for you • Competitive basic salary and annual bonus, • Company car, car allowance or travel allowance, • Salary sacrifice car scheme available to all employees, • Up to 39 days annual leave plus bank holidays, • 2 Volunteering days per annum, • Private medical insurance, with employee paid cover, • Enhanced maternity, paternity and adoption leave, • Competitive pension scheme through salary sacrifice, • Life assurance at 4 x your annual salary, • Share save and share incentive schemes, • Christmas company shutdown, • Behave in line with our company values - Integrity, Caring and Quality, • Full Current UK Driving License or equivalent, • Experience working within a technical role at a residential house builder or contractor, • Good level of IT literacy with experience of AutoCAD, Outlook, Excel & Word,, • Proven ability in a Technical Coordinator/Manager role of delivering design for projects on time, to budget and quality standards with high customer satisfaction results., • Excellent organisation and time management with ability to multitask., • Commercially aware., • Ability to make decisions within authority., • Able to work as a team member., • Experienced in analysing problems and delivering solutions., • Strong mathematical ability., • Be able to design and interpret the designs and technical demands of others., • Professional aptitude and appearance at all times., • Strives for continuous improvement for the benefit of the company., • Driven to achieve customer satisfaction., • Able to work under pressure, and accept criticism of work, • Be able to work effectively in a team, • Good level of communication skills, with the necessity to liaise with internal staff and external bodies, • Be practical and methodical with good analytical skills, • Embrace the company's core values, • BTEC HND/HNC, Degree or similar in Design, Construction or Civil Engineering, • Member of a professional body such as: ICE, CIAT, CIOB, • Principal Designer and associated Health and Safety training/ qualifications., • Use of Viewpoint drawing management system., • Proficient use of Auto Cad., • Comply with the company Life of Site processes., • Undertake key aspects of the Principal Designer role as defined within the Construction Design & Management Regulation 2015., • Completion of all necessary Health, Safety & Environmental documents, in line with group policy., • Manage the delivery of surveys & reports required for the development and manage associated requirements from design to completion., • Manage the process of obtaining consultant fee proposals and formal appointment documents in accordance with group procedures., • Manage consultants to deliver the civil engineering designs including legal plans., • Undertaking value engineering assessments and ensure buildability., • Manage submission of designs and securing technical approvals for agreements such as S104, S38 and S278., • Following technical approval being granted, managing timely completion of legal agreements., • Manage utility designs and initial mains laying onto site, ensuring legal agreements completed in timely manner., • Manage street naming with local authority, complete plot list and distribute internally and externally of the business., • Assist in production of Sales brochure, legal and sales handover meetings., • Provide information for Housing Association contracts and attendance of progress meetings,, • Manage consultants to deliver the house type working drawing packs and liaise with key suppliers to provide ancillary drawing information for tender, construction and sales packs., • Prepare all drawings and documents for engineering and superstructure elements for tender, followed by the construction issue and sales handover., • Manage the accuracy of information supplied by all departments to ensure no discrepancies., • Submission of all information to building control and warranty providers and obtaining approval of same, obtaining SAP/HEM Assessments together with PEA' and EPC's, etc., • Obtaining and collating all ancillary specialist drawings including hot water supply, heating, kitchen, stair, lintels, p.c. ground floors, and precast upper floors., • Attending and chairing Pre-Start Meetings and briefing all departments on matters related to the engineering and working drawings., • Manage information and liaise with architects, civil and structural engineers and landscape architects, ensuring consistency between various designs., • Assist the Land, Planning & Development teams with advice during the land acquisition stage and assist in the information to discharge of planning conditions., • To monitor and report technical & development fees including S106 obligations. We build more than homes, we're making Vistry. Being a responsible developer and award-winning employer means we live each day through our ethos - doing the right thing. Our behaviours reflect this, as well as our values of integrity, caring and quality. Shaping all we do; they empower us to develop sustainable communities across affordable and private housing. We work in a partnership-led way, and you'll recognise our renowned brands Bovis Homes, Linden Homes and Countryside Homes. Together with Vistry Works, our manufacturing operation, and the functional support of Vistry Services, we're a proud UK Green Building Council member, UK top five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating, and winner of many awards including Top Employer, Global Top Inspiring Workplaces, and Best for Talent Attraction and Outreach. Join us in making Vistry. #LI-AD1 JBRP1_UKTJ

HVAC Engineer Location: We are looking for candidates located in and around Worcester, Manchester and Yorkshire Salary: Starting at £47,000 per annum + Excellent Benefits! Contract: Full time, Permanent Benefits: 23 Days Holiday + Bank Holidays, Door to Door Travel, Mon - Fri, 1.5x Sat and 2x Sun, Specialist Tools, Company Van, Fuel Card, Career Progression and Further Training! MEC Humber is a highly experienced, accredited Mechanical & Electrical contractor delivering nationwide services to domestic, commercial, and industrial clients. Established in 2015 and continuously expanding, we provide a full range of M&E services including plumbing, heating, electrical installations, gas work, drainage systems, and HVAC systems. Registered with Constructionline, CHAS, Gas Safe, F-Gas, WaterSafe and NICEIC, we are committed to delivering compliant, high-quality engineering services across diverse sectors such as healthcare, education, construction, leisure, and more. Due to ongoing business growth, we are seeking a skilled HVAC Engineer to join our expanding operational team. As an HVAC Engineer, you will be responsible for installing, maintaining, fault-finding, and repairing commercial and domestic HVAC and associated mechanical systems across sites within your geographical remit. You will represent MEC Humber on client sites, ensuring professional service delivery, excellent technical standards, and full compliance with safety and industry regulations. This is a field-based role with autonomy and variety, suitable for an engineer who enjoys working across a diverse portfolio of projects. As our HVAC Engineer you will: • Install, maintain, service and repair HVAC systems across domestic and commercial sites, • Diagnose faults and complete corrective actions efficiently, • Carry out planned and reactive maintenance, • Work on ventilation, air conditioning, heating and mechanical systems, • Ensure all work complies with current regulations and internal standards, • Complete accurate job sheets, reports, and documentation, • Communicate effectively with clients and internal teams, • Uphold MEC Humber's high standards of customer service, • Adhere to Health & Safety compliance and safe working practices, • Valid D&C Gas Qualifications, • F-Gas Certification, • Level 3 qualification in HVAC, OR a transferable equivalent mechanical/electrical qualification, • Experience working on HVAC systems in commercial and/or domestic environments, • Strong diagnostic and problem-solving skills, • Experience across multiple M&E disciplines (heating, gas, electrical), • Refrigeration and air handling unit experience (AHU), • Knowledge of MEP systems (as MEC Humber provides full M&E services), • Work with a respected, growing M&E contractor delivering high-calibre engineering projects across the UK, • Join a supportive team of qualified engineers, • Ongoing training and development opportunities, • Diverse site environments and industries No agencies please. JBRP1_UKTJ

Job Title: Showroom Manager Bathroom Showroom Job Type: Full-time, Permanent Salary: Negotiable+ Profit Share Location: Croydon About Us: We are the largest independent networks of plumbing and heating merchants in the UK with over 310 sites nationwide. Our sites are run by people who know their customers, their stock, and their local market. Thats because we give them autonomy and ownership - not a one-size-fits-all script. Job Overview: Were looking for someone who can run this showroom with energy, initiative, and a commercial eye - someone who understands that good design matters, but great relationships and follow-through are what drive results. Youll guide customers through their journey from first enquiry to final order, while also taking a proactive role in building relationships with local installers, developing repeat business, and keeping the showroom front-of-mind with both trade and retail customers. Youll have the freedom to shape your space, tailor your approach, and trade in a way that works for your local market. If youve got a background in showrooms and you enjoy the buzz of helping people make decisions and getting deals over the line, then this is a great opportunity to build something thats truly yours. What Youll Be Doing Running day-to-day operations of the bathroom showroom Leading and coaching Business Development Managers / Bathroom Designers to drive sales and service Developing trade and retail customer relationships Owning local marketing and driving repeat business Maintaining a showroom that inspires - layout, merchandising, displays Supporting customers with design advice and product recommendations Using commercial data to steer performance Working closely with trade installers and the wider site team What Were Looking For Experience in a bathroom, kitchen, interiors, or design showroom People leadership or team supervision experience (preferable) Sales focused with good commercial acumen including margin management, supplier relationships and stock management Strong customer focus and excellent communication skills Creative flair and interest in home design CAD experience (e.g. Virtual Worlds) is a bonus, not essential Full UK driving license What Youll Get Full autonomy to run your own showroom Supportive environment with real decision-making power Career progression across a national independent merchant network Trusted, respected employer in the trade and retail space Keywords:Showroom Manager, Bathroom Showroom, Bathroom Sales, Interior Design, Kitchen Showroom, Retail Management, Home Improvement, CAD Design, Virtual Worlds, Customer Experience, Sales Leadership, Trade Counter, Plumbing Merchant, Design Consultant, Team Leader, Visual Merchandising, Branch Manager, Showroom Design, Plumbing Jobs, Retail Sales Manager JBRP1_UKTJ

Technical Advisor Boilers & Heat Pumps • Are you a Gas Engineer, Boiler Engineer, Air Conditioning Engineer, or Refrigeration Engineer? The Role With their Heat Pump range having been established for a number of years, they are now seeking a Technical Support Engineer who can provide technical support to engineers, installers and end users, with a focus on Heat Pumps, but also boilers, cylinders & controls. The role is based within their offices near Swindon three days a week, with the option of working from home two days a week. Responsibilities • Taking calls from engineers or installers on site for in warranty products, offering technical support and diagnosing faults whilst engineer is on site., • Progress calls for products covered by the manufacturer's warranty to either the onsite engineer or to the customer services team to allocate., • Dealing with customer/installer issues, offering solutions and autonomy to rectify the issue as diplomatically as possible., • Update the database with notes & details regarding interactions with end users, Installers and engineers., • Answer technical related emails that are sent into the departments email address. You will be an Engineer with a solid technical aptitude as either: Heating Engineer, Boiler Engineer, Gas Engineer, Heat Pump or Renewable Engineer, Refrigeration Engineer or Air Conditioning Engineer You will be: • Organised and capable of multi-tasking, • Interested in emerging renewable technology & keen to undertake initial and continued training, • Computer literate (able to use email, documents, etc) Hybrid based - Swindon offices 3 days a week, and home based 2 days a week.] Monday to Thursday 7.30am to 4.30pm or 9am to 6pm (alternating) Friday 7.30am to 4pm or 8.30am to 5pm (alternating) One Saturday morning a month after training (8.30am to 1pm) paid at Overtime Salary circa £40,000 plus associated benefits. Interested in discussing the role or applying? - then contact Dan at startMonday now. Experience; Gas Engineer, Heating Engineer, Gas Technician, Boiler Engineer, Worcester Bosch Engineer, Vaillant Engineer, Viessman Engineer, Baxi Engineer, British Gas Engineer, Homeserve, Heat Pump Engineer, Refrigeration Engineer, Air Conditioning Engineer JBRP1_UKTJ

Our client is one of the largest facilities management and maintenance contractors in theUK, offering market leading opportunities for talented professionals looking for long term career progression. Due to an increase in upcoming projects, there is now a need for aMobile Mechanical Engineerto join this highly successful and forward-thinking organisation. We are looking for aMobile Mechanical Engineerwho wants to work in a diverse rolewhere no two days are the same. TheMobile Mechanical Engineer,will be responsible for: • We are looking for an experienced Mobile Mechanical Engineer to maintain and repair installations such as:, • Ventilation systems (AHU, Intake/extract)., • Heating and cooling systems (Thermal wheels, FCUs, etc.)., • Water system assets, such as (Booster sets, calorifiers, water heaters), • Reporting any defects and keeping them informed of site activities at the time of the service visit., • You will also be required to complete all work-related documentation accurately and on time., • The ideal candidate would have an experience within a Maintenance/Facilities Management environment., • You must have relevant qualifications required e.g. C&G Level 3 or equivalent., • You should also have knowledge of Health & Safety, Permit to Work procedures, and safe systems of working., • You should have the capability to perform manual tasks, including manual handling, working at heights and in confined spaces. JBRP1_UKTJ

We are currently recruiting Gas installation engineers to take on an installation contract on behalf of a market leading company. all works will be in the social housing sector and all jobs will be sent via a pda. The successful Gas Installation Engineer will receive 3-5 jobs a week all based in your chosen working location. in order to take on this position as a service and repair engineer, the successful gas engineer must meet the following criteria: 3 - 5 days per week Weekly Pay Parts Provided Electrician supplied to wire up Essential Requirements: • OwnGasSafe Registration, • ACS Qualifications, • Own Van and Tools, • Criminal Background Check, • Domestic experience, • MINIMUM 2 years experience installing boilers, • Experience managing own workload, • Qualified installer of vented and unvented cylinders, • Ability to work confidently in high end properties, • Experience with power-flushing heating system JBRP1_UKTJ

We are seeking a qualified and experienced Subcontract Domestic Gas Service & Repair Engineer to join our team. The successful candidate will be responsible for servicing, diagnosing, and repairing domestic gas appliances and heating systems in residential properties. This role offers flexibility, guaranteed workload, and competitive weekly pay, making it ideal for self-employed professionals seek...