Highest pay jobs in HitchinCreate job alerts

Job Title : Membercare Assistant (Female) \n Hours : 12 per week \n Rate of Pay : £12.71 per hour \n Location : Fairfield\n \n \nBannatyne is renowned for providing exceptional fitness and wellness experiences across the UK. We are committed to maintaining the highest standards of cleanliness and hygiene to ensure our members have a safe and welcoming environment. We are currently looking for a dedicated and detai...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKCT

On behalf of our client, we are seeking to recruit a Manufacturing Assembly & Integration Engineer Lead on an initial 12-month contract basis. As the Manufacturing Assembly & Integration Engineer your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Role: Manufacturing Assembly & Integration Engineer Pay: £32 - £35 per hour Umbrella rate Location: Stevenage - fully onsite Contract: Monday to Friday, 37 hours per week, 12 months IR35 Status: Inside SC Clearance: SC however can start on BPSS Responsibilities: Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process using FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non-Conformance Process using SAP. Required Qualifications: Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.) AND Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved OR Degree in a relevant subject. Required Experience: Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Understand and work to Company Processes and Procedures. Have the ability to communicate both within the working group and at various levels of the organisation. If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

An opportunity has arisen with my client for a Goods Inwards Inspector to join them on an initial 12 -month contract. As the Goods Inwards Inspector, you will ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Role: Goods Inwards Inspector Pay: £28.71 per hour via Umbrella Company Location: Stevenage Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared Responsibilities: Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspections times are met. Control defect items via segregation from good product. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCBs Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain to the highest level, workmanship standards and product quality. Contribute to the maintenance of an orderly and safe working environment. Skillset/experience required: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. Formal further education certificate to HNC or equivalent certificate. The successful candidate should be a team player who is able to demonstrate customer focus. They should be adaptable to any work-related processes and working practices. Must have goods in inspection experience. Manual handling training. SAP literate is desirable.If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Freelance Site Manager (Holiday Cover) Stevenage, Hertfordshire (SG1) 3 weeks work min Pay: £250 - £270 per day Hill McGlynn Recruitment are proud to be working with a specialist Property Developer delivering regeneration, refurbishment, and new build projects across the residential and public sectors. We are currently recruiting for an experienced Freelance Site Manager to provide holiday cover on a live occupied residential refurbishment project in Stevenage between 10th August and 28th August 2026. This is an excellent opportunity for a professional, customer-focused Site Manager with experience to oversee works on a busy site, where maintaining excellent relationships with residents and the public is essential. The Role As a Site Manager, you will be responsible for the day-to-day management of the site, ensuring all works are delivered safely, on programme, and to the highest quality standards while maintaining a positive experience for residents and the client. Key Responsibilities Managing the day-to-day running of the site during the holiday cover period Supervising subcontractors and coordinating site activities Monitoring health and safety compliance across the project Managing works including: Scaffold adaptations Brickwork and blockwork Sheathing board installation EPDM application Tyvek membrane installation Rendering works Carrying out quality inspections and ensuring works meet specification Managing site records and reporting progress to the project team Liaising professionally with residents, the client, and members of the public Maintaining a clean, safe, and organised working environment throughout the project Requirements Valid SMSTS Valid CSCS Card First Aid at Work Certificate Previous experience managing refurbishment projects Excellent communication and customer-facing skills Polite, patient, punctual, and professional approach Experience using the Fieldview QA system would be advantageous If you're an experienced Site Manager available for a temporary assignment and looking for your next opportunity, Hill McGlynn Recruitment would be delighted to speak with you. Apply today to find out more

On behalf of our client, we are seeking to recruit an Electrical Architect on an initial 6 - month contract. As the Electrical Architect you will be responsible in all aspects of missile development, from the early concept studies to series production and in-service support Role: Electrical Architect Pay: £60 - £85 per hour Umbrella Location: Stevenage, Bristol or Bolton Contract: Monday- Friday, 37 Hours per week, 6 Months Contract IR35 Status: Inside Security Clearance: SC will be required however can start on BPSS Essential Responsibilities Own the electrical architecture and requirements for missile/launcher systems. Define interfaces between subsystems (ICDs, characteristics, constraints). Build the power architecture (budgets, profiles, distribution). Define data comms/processing architecture and system interconnects. Set EMC, bonding, grounding, screening and signal safety requirements. Support integration, test, compatibility checks, qualification and fault-finding. Produce/review technical reports, processes, and guidelines. Perform design assessments and analysis to support compliance and safety. Work to defence/industry standards and support design reviews. Essential Experience Degree-level qualification in Electrical/Electronic Engineering or a closely related discipline (or equivalent experience). Demonstrable experience in electrical/electronic engineering within complex engineered systems. Experience defining and managing system requirements (systems engineering approach). Strong capability in defining electrical interfaces and producing/maintaining Interface Control documents (ICDs). Experience producing clear, structured technical documentation and reports. Working knowledge of relevant defence and/or industry engineering standards (e.g., EMC, safety, grounding, bonding, design assurance). If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

We are recruiting for a talented Hardware Design Engineer to join our client's Test Equipment Hardware Design Capability team on a 6-month contract. Part of the Test Equipment Centre of Excellence (TE CofEx), this team designs, integrates, and validates innovative test system hardware solutions that support products throughout their lifecycle. This is a fantastic opportunity to contribute to cutting-edge projects, ensure technical excellence, and help drive engineering success. Role: Test Development Engineer Pay: £50 per hour Via Umbrella Location: Stevenage Contract: Monday- Friday, 37 Hours per week, 6 Months Contract IR35 Status: Inside Security Clearance: SC Required however can start on BPSS Essential Responsibilities Prepare specifications & develop designs in line with all quality and technical standards. Develop proposals for investigations & solutions, following investigation and analysis of technical issues. Carry out design appraisals to ensure all standards are maintained. Define & specify test approaches, identifying any potential improvements to test/diagnostic processes. Carry out team planning, risk management and quality activities in collaboration with the Engineering Project Manager Production of documentation to support the in-service use of products Support the identification of business opportunities and the preparation of bids Manage assigned budgets and lead, develop and motivate team members Report against work programmes Make Engineering decisions within own sphere of responsibility Ensure team size & capability mix is optimised for successful delivery of work packages & projects Support of less experienced team members Keep up to date in the relevant technical areas Essential Experience Skilled Hardware Design Engineers with proven experience to support the design, integration and validation of test system hardware solutions. Knowledge of test needs and techniques in support of product life cycle development. Experience of Design Proving and performance testing during development. Experience of Environmental and EMC testing during qualification. Strong document writing skills associated with Test Equipment hardware design needs. Experience of managing packages of work is highly desirable. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

We are seeking a dedicated Product Assurance Engineer to join the Product Assurance Engineering team on a six-month contract in Stevenage or Henlow, providing professional quality support to the UK Manufacturing team. In this role, you will ensure independent oversight and assurance of manufacturing processes across all projects, offering expert guidance on quality standards, process improvements, and risk mitigation. Role: Product Assurance Engineer Pay: £35 per hour Via Umbrella Location: Stevenage (Henlow could be an option) Contract, Monday - Friday 37 hours per week, 6 Months Contract IR35 Status: Inside Security Clearance: BPSS to start, SC required, UK eyes only Responsibilities Provision of professional support and advice on all aspects of quality within Manufacturing UK; apply quality expertise to critical business issues to support business excellence, continuous improvement and customer satisfaction. Provision of quality assurance assistance to Manufacturing UK in support of manufacturing excellence including development and delivery of quality awareness and other process and quality-related training. Supporting Manufacturing UK on all programmes to achieve cost, time and quality targets. Assessing and controlling the product assurance quality processes and the resulting outputs. Assuring to and implemented in Company production programmes, and providing the appropriate level of support to improve the effectivity of processes used by the Company Business Management System is correctly tailored Manufacturing UK. Confirm through a programme of Independent assessments and audits that processes and quality requirements are being successfully implemented, applied and improved. Provide reports to Management that identifies the outcome of audits and issues. Monitor and facilitate the progression of any improvements from audit activities and the timely closure of identified issues. Maintaining strong links with Quality Assurance colleagues across MBDA (UK and Overseas) to enable the dissemination and achievement of Quality Objectives within Manufacturing UK. Work with Product Assurance Managers and other functions to define appropriate risk reduction strategies/action plans Support the development and implementation of the Process Effectiveness Review Programmes Interface with Customer Representatives (DQAFF), when required, to support the mitigation of quality issues Provide advice and help in the use of SAP as the non-conformance management tool and identify SAP improvement with respect to the Quality Module. Facilitation and/or support to various levels of Non-Conformance Review Panels Analysis of non-conformance defect data and acting on this data to undertake problem solving investigations identifying defect root cause and corrective action implementation Essential Experience Ideally qualified to minimum HNC/HND in relevant subject. Quality professional, experienced in process-based integrated management systems & business improvement in an engineering / manufacturing environment. Experience using both risk management and practical problem solving tools e.g. 8D, 5Y, PFMEA etc. Good working knowledge of Microsoft Office packages (PowerPoint, Word and Excel) Quality Auditing experience required Extensive knowledge and experience of EN9100/AS9100 Excellent interpersonal skills Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Capability to identify sustainable business improvements & ensure effective implementation Recognise and understand internal and external customer requirements, and respond to them Ability to communicate and influence effectively at all levels of the organisation Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Recognise and understand regulatory and certification requirements, and respond to them Understanding of AS9102 -First Article Inspection Requirements If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

On behalf of our client, we are seeking a Electronics Design Engineer to join my client on an initial 12 month contract. As the Electronics Design Engineer you will be responsible for developing cutting-edge electronic solutions for weapon systems. This will include on board missile sub-systems and Land, Sea and Air based Firing Units. Your role will entail responsibility for the quality and performance of the electronic solution together with providing cost and schedule updates to a project manager. Role: Electronics Design Engineer Pay: Up to £58 per hour via Umbrella Location: Stevenage Contract: Monday - Friday 37 hours per week, 12 months contract IR35 Status: Inside Security Clearance: Security Clearance before starting, UK Eyes only project Responsibilities: You will be responsible for developing cutting-edge electronic solutions for weapon systems. This will include on board missile sub-systems and Land, Sea and Air based Firing Units. Your role will entail responsibility for the quality and performance of the electronic solution together with providing cost and schedule updates to a project manager. You will have a soundtrack record in electronic design capability throughout the product life cycle, i.e. Early concept through to production. The technical solutions you will implement will range across the Power and Analogue Electronics sphere of expertise and will be at both sub-system and board level. This role will require you to liaise with other domains, e.g. Software, Firmware, Mechanical, Environmental, EMC etc. to ensure your designs perform in all respects to the requirements placed upon you. In so doing you will be key to delivering world class missile solutions to our customers.Essential Skills: Degree qualified with significant post qualification experience in Electronic Design, development, and delivery. Someone who can demonstrate the capability to lead significant electronic design work packages and have experience of working within a multi-disciplinary team with the awareness and understanding of the challenges that this may bring. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Altro are recruiting for a Manufacturing Fabrication Team Leader to join our Value Added Services team within our Manufacturing plant based in Letchworth Garden City . This role will be working on a rotating double day shift, Monday to Friday. Our Value Added Services team are responsible for cutting and designing bespoke flooring orders, mainly for the transport industry. You can find our more about these products at the link below: Altro | Flooring Manufacturers & Wall Cladding Suppliers | Altro UK What will you be doing? The Team Leader will be responsible for the ongoing development and coaching of up to 6 Technicians on each shift. Conducting regular one to one's with team members, you will develop people plans to enable individuals to realise their full potential. You will ensure Health and Safety is always of the highest priority and environmental objectives are fulfilled including risk/COSHH assessments, SOP and audits. As well as reviewing all processes within Value added Services to ensure that efficiency levels are achieved/ exceeded, you will monitor and improve all costs and budgets. You will support the application of 5S, visual management and continuous improvement to deliver an inspiring and highly efficient operation, while using Lean tools and techniques to deliver the most effective processes and ensure smooth day to day running of the function, in line with the operational targets. As well as an exciting opportunity and a competitive salary, what do we have offer? Holiday entitlement starts at 25 days (pro rata); if you need a little extra... you can buy some more A defined contribution pension scheme available for all staff Hopefully never needed, but from day one you will be covered by our life assurance scheme Occupational Sick Pay and an onsite Occupational Health Service Confidential 24-hour life management and personal support service for you and your family Free eye tests are available for all employees A paid day off each year to take part in our volunteering scheme Don't worry about getting parked...we have free car parking at all our sites We offer long service awards to all our employees Learning and Development - training and development support, no matter where you are in your career A variety of social events across the group, including the company Christmas party. It might be a long way off but we know it's not always easy to stop working so we provide advice and support to ease the transition to retirement. So who are Altro? A leading European manufacturer and supplier of premium flooring and wall cladding systems for Healthcare, construction and transport. We have been going strong since 1919. Family owned and run, we share family values; we care about you, each other and what we do. What are we looking for? We are looking for someone with proven experience in managing and developing people within a manufacturing/ fabrication environment. High levels of attention to detail and the ability to read and interpret production specifications, work instructions, and technical documentation. If you have experience of using specialised CNC equipment, CAD, CRM and ERP systems, we'd love to hear from you. Everyone is welcome at Altro for who they are, no matter what their background is or how they identify. We appreciate that everyone is different and with that diverse uniqueness we can all thrive. “We don't want you to just work here. We want you to belong here.” If you have the relevant experience and you're ready for a new challenge, click apply today! We can't wait to hear from you. TPBN1_UKTJ

On behalf of our client, we are looking for two Windows Engineers to join on an initial 12 month basis. You will be part of the Digital Excellence function providing IT Services to the business. Role: Windows Engineer Pay: £67.57-£74.32 per hour via Umbrella Contract: 37 hours per week, 12 months contract Location: Stevenage - Fully onsite IR35: Inside SC Clearance: Current DV - UKEO Responsibilities: Provide operational BAU support, administration & configuration management across Infrastructure and Workplace Windows Environments in restricted secret & above networks. Responsible for maintaining a good working knowledge of the business IT environment. Planning & coordinating maintenance and patching across the Windows Environments in restricted secret & above networks. Access & implement changes to the restricted Windows Environment, ensuring minimal disruption to operations. Creation, maintenance & audit of inventory information and asset registers as required. Creation, maintenance & review of comprehensive, high-quality documentation as required. Creation & maintenance of standard problem resolution & fix documentation, to ensure any technical knowledge bases are kept are up to date. Responsible for resolution of incidents related to Windows Services across restricted secret & above networks in line with agreed SLAs, following escalation processes as appropriate. Acting as Tier 2 / Tier 3 support for Windows related issues & problem resolution, performing incident response, investigation & remediation within SLA timeframes. Co-ordinate with incident & Technical managers, following incident management process during high-severity incidents. Identify underlying root causes of reoccurring incidents, assisting in implementation of long-term solutions. Actively participate in lessons learned activities, conducting thorough root cause analysis, and documenting findings, as part of continuous improvement cycle. Responsible for ensuring update and closure of all incidents & requests assigned to team queue in accordance to SLA. Stay current with any developments in Windows technologies, products, practices and trends. Support with monitoring and alerting across restricted secret & above networks. Responding proactively to alerts & implementing threshold and health-based remediation actions as appropriate. Monitor and optimise network/server performance, security, and backups. Ensure compliance with security guidance and best practice in line with adopted security postures. Interface with agreed 3rd party service providers for assistance & technical support, troubleshooting and network management and also to provide technical guidance to the 3rd party suppliers. Bring forward key issues, changes & topics to service meetings for discussion. Participate in Cross-functional Team Collaboration as required. 100% site-based role due to nature of network. Requirements: Must hold DV clearance. Experienced Windows Engineer - must be a generalist with ability to work comfortably across both Infrastructure & Workplace. Hands on skills & in-depth expertise across Windows Server, Windows OS, and Desktop Applications, Virtualisation Platforms including VDI, Storage Solutions, AD & Access Management. Knowledge of networking principles, and excellent troubleshooting skills. If you are interested in applying for this position and you meet the requirements, please apply now! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity

My client is looking for a Live Build Manufacturing Technician to join them on an initial 12-month basis. As the Live Build Manufacturing Technician will be responsible for carrying out manufacturing, test and inspection tasks within the Live Build Facility, in accordance with product certification procedures, allocated budgets and timescales to meet project objectives Role: Live Build Manufacturing Technician Pay: £29.70 per hour via Umbrella, inside IR35 Location: Henlow - fully onsite Contract: 12 Months (possible extension) Hours: Monday - Friday, 37 hours per week Security Clearance: SC required to start Responsibilities: Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant, test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members. The Manufacturing Technician will typically be capable of certifying the product and possess a versatile skill base, with a capability to apply their skills, across a range of tasks utilising equipment and tools, gauges and measuring instruments associated with the production, repair and modification of company products to meet defined build standards and specification requirements. Instructions associated with the task to be carried out would normally be documented by Engineering and take the form of Layouts, Schedules and Test Specifications. Equally these requirements may also take the form of a limited documentation set.Skillset/experience required: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational NVQ3 with Further Education, BTEC ONC/HNC In a relevant Engineering/Manufacturing Subject Experience in a Manufacturing / Craftsman position. Experience in Mechanical fittingIf you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Please note: No visa sponsorship is available for this position. Applicants must already have full and unrestricted eligibility to work in the UK. Candidates requiring visa sponsorship will not be considered. Registered Nurse – Night Nurse Location: Hitchin Hours: 33 hours per week – 3 night shifts per week Shift Pattern: 20:00 – 08:00 Pay Rate: £21.40 per hour Employment Type: Permanent Job Summary We are seeking an experienced Registered Nurse (RGN) to join our well-established client based in Hitchin on a permanent basis. This role is specifically for a Registered Nurse to work 3 night shifts per week, totalling 33 hours. The shifts run from 20:00 to 08:00. The successful candidate will join a highly regarded residential, nursing and dementia care provider, becoming part of a dedicated team committed to delivering exceptional, person-centred care. Essential Requirement – EMAR Experience Applicants MUST have previous experience using EMAR (Electronic Medication Administration Records). This is an essential requirement for the position. Candidates without EMAR experience will not be considered. Key Responsibilities Lead clinical night shifts and provide effective clinical oversight. Assess, plan, implement and evaluate personalised care plans. Promote residents' independence, dignity, choice and wellbeing. Provide clinical guidance and support to care staff. Administer medication safely and accurately, including using the EMAR system. Maintain accurate clinical documentation and medication records. Identify and respond appropriately to changes in residents' conditions. Escalate clinical concerns appropriately and liaise with healthcare professionals where required. Support and mentor Care Assistants through guidance, training and coaching. Act as a Named Nurse for a designated group of residents where required. Participate in clinical audits and quality improvement initiatives. Communicate effectively with residents, families, healthcare professionals and external agencies. Promote a positive, open and supportive team culture. Maintain confidentiality and uphold the highest professional standards. Ensure health and safety procedures are followed and report concerns promptly. Deliver thorough and effective handovers between shifts. Requirements Valid NMC registration as a Registered Nurse (RGN/RN). Previous hands-on experience using EMAR is essential. Previous nursing experience within a care home, nursing home or similar healthcare setting. Strong clinical assessment and decision-making skills. Excellent communication and interpersonal skills. A commitment to delivering high-quality, person-centred care. Ability to work independently and as part of a multidisciplinary team. Good understanding of medication management and clinical documentation. Willingness to complete mandatory and specialist training. Full eligibility to work in the UK. What They Offer £21.40 per hour 33 hours per week 3 x 12-hour night shifts per week (20:00–08:00) Permanent employment Ongoing training and professional development Supportive working environment Opportunities for career progression The opportunity to join a well-established and reputable care provider If you are an experienced Registered Nurse with current NMC registration and proven EMAR experience, we would be keen to hear from you

On behalf of our client, we are seeking a Electronics Design Engineer to join my client on an initial 12 month contract. As the Electronics Design Engineer you will be responsible for developing cutting-edge electronic solutions for weapon systems. This will include on board missile sub-systems and Land, Sea and Air based Firing Units. Your role will entail responsibility for the quality and performance of the electronic solution together with providing cost and schedule updates to a project manager. Role: Electronics Design Engineer Pay: Up to £58 per hour via Umbrella Location: Stevenage Contract: Monday - Friday 37 hours per week, 12 months contract IR35 Status: Inside Security Clearance: Security Clearance before starting, UK Eyes only project Responsibilities: You will be responsible for developing cutting-edge electronic solutions for weapon systems. This will include on board missile sub-systems and Land, Sea and Air based Firing Units. Your role will entail responsibility for the quality and performance of the electronic solution together with providing cost and schedule updates to a project manager. You will have a soundtrack record in electronic design capability throughout the product life cycle, i.e. Early concept through to production. The technical solutions you will implement will range across the Power and Analogue Electronics sphere of expertise and will be at both sub-system and board level. This role will require you to liaise with other domains, e.g. Software, Firmware, Mechanical, Environmental, EMC etc. to ensure your designs perform in all respects to the requirements placed upon you. In so doing you will be key to delivering world class missile solutions to our customers.Essential Skills: Degree qualified with significant post qualification experience in Electronic Design, development, and delivery. Someone who can demonstrate the capability to lead significant electronic design work packages and have experience of working within a multi-disciplinary team with the awareness and understanding of the challenges that this may bring. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Cook When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. Cook Shift Patterns: 07:30 am till 15:30 pm About the role: We are currently recruiting for a Second Chef to join our Hospitality team. Working as a Second Chef at Runwood Homes, you will have the chance to deliver hotel and restaurant standard meals, without the split shifts and long hours. We are looking for warm, motivated, and passionate Second Chefs who are driven by quality and high standards, to deliver person centred hospitality to our residents. Our Second Chefs support our Head Chefs, and take the lead in their absence. Benefits of working with Runwood Homes: 28 days Paid Holiday Weekly Pay Pension Scheme Blue Light Card and access to various other discounts on travel, restaurants, days out and leisure Employee Assistance Scheme that is also available to immediate family members Comprehensive induction and ongoing training Free DBS Check and uniform Funding and support towards obtaining NVQs Opportunities to progress your career within the company Employee of the Month awards Key responsibilities: To ensure that all stages of food preparation are maintained to the highest standards ensuring the well-being of residents. To ensure the cooking and serving of meals are in accordance with the menu, the Company requirements. To ensure compliance with the Food Safety & Hygiene (England) Regulations 2013 / Food Hygiene Regulations (Northern Ireland) 2006 To ensure the quality of meals produced in terms of presentation and taste. To ensure that portion control procedures are maintained ensuring waste is kept to a minimum. Ensure individual dietary requirements are met (e.g. high calorie, low sugar etc.) by following appropriate quantity, charts and recipes or adapting dishes if required. To ensure that the necessary systems and checks are maintained in order to provide a safe, healthy and efficient working environment. To ensure all food and other items are stored correctly. To monitor stock, maintain effective stock rotation and place orders where required. To deputise for the Head Chef where required. About you: The successful Second Chef will have relevant experience within a catering environment. You will have a secure understanding of special dietary and nutritional requirements, and be able to implement methods to ensure these needs are met. You will also have your Food Hygiene Level 2, and ideally an NVQ Level 2. About Runwood Homes: Established in 1987, Runwood Homes is a leading provider of residential care, dementia care, and nursing care services, with a portfolio of 57 homes across England. Our commitment to delivering personalised care is at the core of our mission, as we strive to celebrate the lives of each and every one of our residents. At Runwood Homes, we prioritise the professional development of our staff by investing in comprehensive internal, external, and e-training programs at all levels. This dedication to continuous learning and growth ensures that our team is equipped to provide the highest quality of care to our residents. As we look towards the future, our reputation for delivering innovative care for individuals living with dementia continues to flourish. We are dedicated to pushing the boundaries of care excellence and setting new standards in the industry. All appointments are subject to safer recruitment requirements to ensure the safeguarding of adults. All positions will involve appropriate checks and clearances. You can apply for this role by completing our short application form or by visiting the home where one of our team can help you. TPBN1_UKTJ

CNC Programmer / Setter Letchworth £17.00 - £22 pe hour (DOE) + Overtime + Bonus Scheme Permanent - 37.5 Hours Per Week This is an excellent opportunity for an experienced CNC Programmer / Setter to join a highly skilled manufacturing team, working with modern machinery on a wide range of precision engineering projects. Youll be producing high-quality, one-off and low-volume components for customers across the aerospace, automotive, and engineering sectors. If youre passionate about CNC machining, enjoy problem-solving, and take pride in producing precision work to the highest standards, wed love to hear from you. Whats in it for you? £17.00£22.00 per hour (depending on experience) Regular overtime paid at 1.5x your hourly rate Performance bonus scheme 25 days holiday plus Bank Holidays Company pension and sick pay scheme Modern workshop with high-end machinery and tooling Ongoing training and development opportunities Stable, growing business with genuine long-term career prospects The Role: As a CNC Programmer / Setter , youll be responsible for programming, setting, and operating Doosan machining centres, producing precision components and one-off press tools to exact customer specifications. Your Responsibilities: Programming CNC machining centres from scratch and existing programs Setting and operating Doosan machining centres Carrying out first-off inspections to ensure quality standards are met Optimising tooling and cutter paths to improve cycle times and efficiency Manufacturing precision one-off press tools for in-house production Reading and interpreting engineering drawings What Were Looking For: Were looking for an experienced CNC professional with a strong eye for detail and a passion for precision engineering. Ideally youll have: Proven experience in CNC milling and programming (essential) Experience setting and operating CNC machining centres Ability to confidently read and interpret engineering drawings Experience using CAD/CAM software Knowledge of Delcam or SpaceClaim would be an advantage (training available) Ability to carry out manual handling duties where required Apply Today! If youre looking to join a respected engineering company where your skills will be valued, your development supported, and no two days are the same, wed love to hear from you. Apply today through 3Sixty Talent Management and take the next step in your CNC engineering career! TPBN1_UKTJ

Please note: No visa sponsorship is available for this position. Applicants must already have full and unrestricted eligibility to work in the UK. Candidates requiring visa sponsorship will not be considered. Registered Nurse – Night Nurse Location: Hitchin Hours: 33 hours per week – 3 day shifts per week Shift Pattern: 08:00 – 20:00 Pay Rate: £21.40 per hour Employment Type: Permanent Job Summary We are seeking an experienced Registered Nurse (RGN) to join our well-established client based in Hitchin on a permanent basis. This role is specifically for a Registered Nurse to work 3 day shifts per week, totalling 33 hours. The shifts run from 08:00 to 20:00 The successful candidate will join a highly regarded residential, nursing and dementia care provider, becoming part of a dedicated team committed to delivering exceptional, person-centred care. Essential Requirement – EMAR Experience Applicants MUST have previous experience using EMAR (Electronic Medication Administration Records). This is an essential requirement for the position. Candidates without EMAR experience will not be considered. Key Responsibilities Lead clinical night shifts and provide effective clinical oversight. Assess, plan, implement and evaluate personalised care plans. Promote residents' independence, dignity, choice and wellbeing. Provide clinical guidance and support to care staff. Administer medication safely and accurately, including using the EMAR system. Maintain accurate clinical documentation and medication records. Identify and respond appropriately to changes in residents' conditions. Escalate clinical concerns appropriately and liaise with healthcare professionals where required. Support and mentor Care Assistants through guidance, training and coaching. Act as a Named Nurse for a designated group of residents where required. Participate in clinical audits and quality improvement initiatives. Communicate effectively with residents, families, healthcare professionals and external agencies. Promote a positive, open and supportive team culture. Maintain confidentiality and uphold the highest professional standards. Ensure health and safety procedures are followed and report concerns promptly. Deliver thorough and effective handovers between shifts. Requirements Valid NMC registration as a Registered Nurse (RGN/RN). Previous hands-on experience using EMAR is essential. Previous nursing experience within a care home, nursing home or similar healthcare setting. Strong clinical assessment and decision-making skills. Excellent communication and interpersonal skills. A commitment to delivering high-quality, person-centred care. Ability to work independently and as part of a multidisciplinary team. Good understanding of medication management and clinical documentation. Willingness to complete mandatory and specialist training. Full eligibility to work in the UK. What They Offer £21.40 per hour 33 hours per week 3 x 12-hour DAY shifts per week (08:00- 20:00) Permanent employment Ongoing training and professional development Supportive working environment Opportunities for career progression The opportunity to join a well-established and reputable care provider If you are an experienced Registered Nurse with current NMC registration and proven EMAR experience, we would be keen to hear from you

We are seeking a dedicated Product Assurance Engineer to join the Product Assurance Engineering team on a six-month contract in Stevenage or Henlow, providing professional quality support to the UK Manufacturing team. In this role, you will ensure independent oversight and assurance of manufacturing processes across all projects, offering expert guidance on quality standards, process improvements, and risk mitigation. Role: Product Assurance Engineer Pay: £35 per hour Via Umbrella Location: Stevenage (Henlow could be an option) Contract, Monday - Friday 37 hours per week, 6 Months Contract IR35 Status: Inside Security Clearance: BPSS to start, SC required, UK eyes only Responsibilities Provision of professional support and advice on all aspects of quality within Manufacturing UK; apply quality expertise to critical business issues to support business excellence, continuous improvement and customer satisfaction. Provision of quality assurance assistance to Manufacturing UK in support of manufacturing excellence including development and delivery of quality awareness and other process and quality-related training. Supporting Manufacturing UK on all programmes to achieve cost, time and quality targets. Assessing and controlling the product assurance quality processes and the resulting outputs. Assuring to and implemented in Company production programmes, and providing the appropriate level of support to improve the effectivity of processes used by the Company Business Management System is correctly tailored Manufacturing UK. Confirm through a programme of Independent assessments and audits that processes and quality requirements are being successfully implemented, applied and improved. Provide reports to Management that identifies the outcome of audits and issues. Monitor and facilitate the progression of any improvements from audit activities and the timely closure of identified issues. Maintaining strong links with Quality Assurance colleagues across MBDA (UK and Overseas) to enable the dissemination and achievement of Quality Objectives within Manufacturing UK. Work with Product Assurance Managers and other functions to define appropriate risk reduction strategies/action plans Support the development and implementation of the Process Effectiveness Review Programmes Interface with Customer Representatives (DQAFF), when required, to support the mitigation of quality issues Provide advice and help in the use of SAP as the non-conformance management tool and identify SAP improvement with respect to the Quality Module. Facilitation and/or support to various levels of Non-Conformance Review Panels Analysis of non-conformance defect data and acting on this data to undertake problem solving investigations identifying defect root cause and corrective action implementation Essential Experience Ideally qualified to minimum HNC/HND in relevant subject. Quality professional, experienced in process-based integrated management systems & business improvement in an engineering / manufacturing environment. Experience using both risk management and practical problem solving tools e.g. 8D, 5Y, PFMEA etc. Good working knowledge of Microsoft Office packages (PowerPoint, Word and Excel) Quality Auditing experience required Extensive knowledge and experience of EN9100/AS9100 Excellent interpersonal skills Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Capability to identify sustainable business improvements & ensure effective implementation Recognise and understand internal and external customer requirements, and respond to them Ability to communicate and influence effectively at all levels of the organisation Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Recognise and understand regulatory and certification requirements, and respond to them Understanding of AS9102 -First Article Inspection Requirements If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Sheet Metal Welder / Fabricator Letchworth £17.50 - £22.00 per hour (DOE) + Overtime + Bonus Scheme 37.5 Hours Per Week 3Sixty Talent Management is recruiting on behalf of a well-established and highly respected sheet metal engineering company based in Letchworth . This is an exciting opportunity for an experienced Sheet Metal Welder / Fabricator to join a skilled and supportive production team, working on a variety of prototype and low-volume manufacturing projects for globally recognised customers across multiple industries. Benefits: £17.50£22.00 per hour (depending on experience) Regular overtime paid at 1.5x your hourly rate Performance bonus scheme 25 days holiday plus Bank Holidays Company pension and sick pay scheme Ongoing training and development opportunities Modern workshop with industry-leading equipment Stable, long-established business with excellent career prospects The Role: As a Sheet Metal Welder / Fabricator , youll be responsible for producing high-quality fabricated components for both prototype and low-volume production work. Youll work from detailed engineering drawings to manufacture precision parts that meet exact customer specifications. Your Responsibilities: Fabricate and assemble sheet metal components Carry out high-quality TIG and MIG welding Read and interpret engineering drawings and technical specifications Operate press brakes, laser cutting equipment, and fabrication machinery Work with stainless steel, aluminium, and mild steel Ensure work meets strict quality standards, including ISO 9001 and AS9100 What Were Looking For: Were looking for someone with a strong background in sheet metal fabrication who enjoys producing precision work to the highest standards. Ideally youll have: Proven experience in thin gauge TIG and MIG welding Sheet metal fabrication experience The ability to read and interpret engineering drawings Desirable Skills: Experience within prototype or low-volume manufacturing Knowledge of laser cutting or CNC machinery Understanding of tight tolerance manufacturing and inspection processes City & Guilds qualifications in Welding & Fabrication or an Engineering Apprenticeship (advantageous) If youre an experienced Sheet Metal Welder / Fabricator looking to join a company that invests in its people, offers varied and technically challenging work, and provides genuine long-term career opportunities, wed love to hear from you. Apply today through 3Sixty Talent Management and take the next step in your engineering career! TPBN1_UKTJ

A well-established financial services organisation is seeking an experienced Deputy General Counsel to join its senior legal team.This is a highly visible, board-facing role offering genuine influence over legal, regulatory and commercial strategy at a growing mutual.You'll act as a trusted adviser

At Brave Toys, we create products that spark imagination, creativity, and hands-on learning for children around the world.Through our award-winning brands, CONNETIX and My Creative Box, we design high-quality toys and activity kits aligned to STEAM and MESH principles, helping families learn, play,

Job Title: Product Marketing Manager – Cybersecurity / Network Intelligence.This is not a traditional marketing role.We’re looking for someone who can take highly technical cybersecurity and network intelligence capabilities and turn them into clear, differentiated business messaging.The busines

An exciting UK based Travel operator specializing in UK wide tours and experiences is looking for a Travel Planner to join their team and help arrange bespoke trips for clients.Outstanding progression opportunities, benefits and hybrid working on offer (2 days home working).Specializing in offering

We are delighted to present an exciting opportunity for an enthusiastic.Pitman rota (2 ON, 2 OFF, 3 ON, 2 OFF, 2 ON, 3 OFF).The opportunity to develop your career within a prestigious luxury environment.A supportive and professional team.Deliver a warm, professional welcome to residents and guests,

People & HR Director (Part-Time, 15-20 hours per week).UK Remote / Hybrid (based in Reading office 2-4 days per month).The LeisureLabs Group is the trusted technology partner for the world’s leading fitness and wellness brands.The Group comprises two complementary businesses:.Software-as-a-Service

We are seeking a Senior Azure SQL Server Database Administrator with deep expertise in Microsoft SQL Server, Azure cloud technologies, and support for ArcGIS Enterprise environments.This role is ideal for professionals who excel in SQL Server administration, cloud integration, database performance o

Head of Health, Safety & Environmental.Salary: Up to £95,000 + Benefits (Healthcare, Car Allowance, Bonus, Pension).Location: Central with regular travel to sites.Are you ready to lead a strategic, company-wide HSE programme that truly makes a difference?.Do you have the expertise to shape a proact

Product Manager - Digital Software.Guildford office – 2000, Cathedral Square, Cathedral Hill, Guildford GU2 7YL, United Kingdom.Nexcess provides specialty cloud solutions for organizations where performance and compliance have to coexist.We serve businesses worldwide, from agencies scaling client

Are you a qualified solicitor of England/Wales with an interest in.We’re about to launch a new recruitment campaign with one of our key clients.They’re looking for talented professionals interested in moving into.We’re supporting hiring across two levels:.No prior criminal law experience is re

Able to understand and recognise client and supplier motivators to ensure delivery is executed to the highest standard.

Elevate Legal Talent is supporting a leading global technology organisation with the appointment of a.This is an opportunity for an experienced in-house lawyer to provide broad commercial and regulatory support across the business, with a particular focus on.You will provide pragmatic, commercially

Fully Remote | Flexible Hours | Fee-Split Model.Join a Forward-Thinking Boutique Firm.Are you an experienced Residential Conveyancer looking for more than just another conveyancing role? Do you find that your clients and referrers are choosing.If that sounds familiar, it might be time to consider a

Working closely with Directors and clients, you'll lead search strategy, engage senior executives, provide market intelligence and ensure every assignment is delivered to the highest professional standard.

Sonovision UK is a leading provider of engineering support services, helping customers across the Aerospace, Defence, Energy and Industrial sectors deliver complex engineering programmes.Our teams translate technical information into clear, accurate and user-focused documentation that supports the o

Senior Technical Project Manager.This role will support a large-scale Enterprise Network Services function, driving project execution across cloud, on-premises, and enterprise networking initiatives while ensuring cross-functional teams remain aligned and focused on successful delivery.This is a ful

Grant Thornton is one of the world’s leading professional services networks with member firms in over 150 countries, 80,000 people and global revenues of $8.Member firms offer audit, tax, and advisory services to privately owned companies, publicly listed companies, public sector and not for profi

Join a forward-thinking engineering consultancy delivering high-impact projects across multiple UK water frameworks for AMP8.This is your chance to shape the future of clean water and wastewater infrastructure while working on diverse, technically rewarding design challenges.Delivering innovative EI

Postdoctoral Researcher – STEM.Postdoctoral Researcher – STEM.This opportunity is for experienced.Postdoctoral Researchers and STEM Research Specialists.AI research and evaluation projects.In this role, you'll apply your research expertise to evaluate.AI-generated scientific outputs, technical a

UK Wide (ER team are based in Birmingham however, remote work can be provided if based outside of the Midlands).At Mitie, our people are our greatest strength, and our promise is to create a place to work where you can thrive and be your best every day.Employee Relations team, providing expert advic

Corporate Partner | National Platform | Greater London.Equity + Onsite + IMMEDIATE START.Some moves aren't about needing something new.They're about recognising when your platform has stopped matching your standing.We're advising a national law firm on a discreet search for a Corporate Partner with

We have a great opportunity for an.AI focussed Creative Director of Presentations and Video.Please note candidates must be based within the UK with full working rights.Presentations are central to what the agency do, their creative output also spans a broad range of formats, from digital documents a

They are looking to recruit a Route Surveyor to be responsible for delivering multimodal transport & logistics solutions both internally and to our clients.Working closely with the Heavy Lift & Specialist Transport team, you will provide an engineered and checked transport solution as per the specif

Over the past 20 years, Afiniti’s patented technology has paired customers and contact center agents in real time based on how well they are likely to interact, leading to better experiences across the entire customer journey.As our products evolve, it is our mission to retain and grow revenue by

We are seeking an experienced IFS HCM Consultant to support the implementation and optimisation of IFS Human Capital Management solutions.The successful candidate will work closely with HR and business stakeholders to deliver high-quality functional solutions and ensure successful project outcomes.L

Our customer, an AI technology company is seeking an experienced.This is an exciting opportunity to join a fast-paced technology environment and support the business as it develops and scales AI-driven products and services.Provide practical legal advice on UK and EU data protection and privacy matt

Flexzo Teach | Alternative Provision Facilitator.Flexible teaching opportunities with local schools through a direct booking platform.Flexzo Teach connects Class Teachers with schools for short term, long term and permanent roles.Receive direct booking requests from local educational settings.Work a

A leading consulting firm is looking to grow its Financial Due Diligence (FDD) team within its Transaction Services practice, with a specific focus on the Technology, Media & Telecoms (TMT) sector.This is a high-growth area of the business, and the firm is investing significantly in building out the

Pharma Integrity is a leading provider of healthcare compliance services to pharmaceutical companies advertising prescription medicines in Ireland, the UK and Europe.We work with clients predominantly based in Ireland and the UK, as well as Global organisations based in Europe, to provide expert adv

Talentmark are recruiting for a Regulatory Product Compliance Officer to join a global materials manufacturing company, based near London, on a full time, permanent basis.The salary for this role is up to £55,000 pa.This is a great opportunity to join a successful technical department in a thriving