Trabajos inspection en ChesterfieldCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Job Description Enjoy a permanent Electrician role offering a company van, a fuel card, and generous pension and holiday. As an Electrician you will be: - Working in domesticproperties - Completing responsive repairs and maintenance - Testing and inspection - Installations I'd love to speak to an

Production Operative Immediately required £12.71 to £17.28 per hour - weekly pay Ongoing regular work - with a genuine opportunity for permanent employment - training is provided Working in a Foundry Based in North East Derbyshire, Dronfield area Hours of work available Monday to Thursday - 6am to 6pm or 5:30am to 5:30pm 4 days on 4 days off - 6am to 6pm Nights 5.30pm to 5.30amDuties of a Production Operative Working in a foundry environment Machine Operating Knocking off castings Pouring molten metal Grinding / angle grinding - using power tools Quality Inspection Using overhead cranes and PPT trucks All training will be provided Heavy, physical work Experience of a Production Operative Ideally worked in a foundry / factory environment / machine operating role before Machine Operating Power tools Hand tools Worked in manufacturing and production environment Detail of a Production Operative £12.71 to £17.28- weekly pay Immediate starts Genuine opportunity Choose to work: Monday to Thursday - 6am to 6pm or 5:30am to 5:30pm 4 days on 4 days off - 6am to 6pm Weekends - Friday, Saturday and Sunday - 6am to 6pm Genuine opportunity for permanent employment Physical Work Worked in manufacturing and production within a foundry Based in North East Derbyshire, Dronfield area If you are interested in the Production Operative days role - please click apply The Job People is acting as an Employment Business in relation to this vacancy. We are an Equal Opportunities employer and welcome applications from all backgrounds. We do not charge candidates any fees or request deposits at any stage of the recruitment process. By applying for this position, you agree to The Job People holding and processing your personal data in accordance with our Privacy Policy on our website

Night Production Operative Immediately required £15.36 to £17.28 per hour - weekly pay Hours of work 5.30pm to 5.30am Monday to Thursday - overtime available if required Ongoing regular work - with a genuine opportunity for permanent employment - training is provided Working in a Foundry Based in North East Derbyshire, Dronfield area Duties of a Night Production Operative Working in a foundry environment Machine Operating Knocking off castings Pouring molten metal Grinding / angle grinding - using power tools Quality Inspection Using overhead cranes and PPT trucks All training will be provided Heavy, physical work Experience of a Night Production Operative Ideally worked in a foundry / factory environment / machine operating role before Machine Operating Power tools Hand tools Worked in manufacturing and production environment Detail of a Night Production Operative £15.36 to £17.28- weekly pay Immediate starts Monday to Thursday 5.30pm to 5.30am Genuine opportunity for permanent employment Physical Work Worked in manufacturing and production within a foundry Based in North East Derbyshire, Dronfield area If you are interested in the Night Production Operative days role - please click apply The Job People is acting as an Employment Business in relation to this vacancy. We are an Equal Opportunities employer and welcome applications from all backgrounds. We do not charge candidates any fees or request deposits at any stage of the recruitment process. By applying for this position, you agree to The Job People holding and processing your personal data in accordance with our Privacy Policy on our website

If you are an experienced Registered Manager who thrives on commissioning and wants the opportunity to shape a residential care home, this role offers genuine ownership from day one. Based in Derbyshire, you will lead a full pre-opening journey with the backing of an established care provider. Package & Benefits • Salary of £(phone number removed) per annum. • 20% performance related bonus. About the Company The provider operates high-quality care homes with a strong focus on resident experience, and consistent care standards. They invest in their homes and leadership teams to support sustainable, high-quality services. Key Responsibilities • Manage a medium sized residential care home. • Achieve and maintain CQC registration, embedding strong governance and compliance from the outset. • Recruit, develop, and lead a high-performing senior and frontline team. • Establish a positive culture focused on quality, dignity, and sustainable growth. About You • Proven experience commissioning a care home or service. • Experience working as a Registered Manager in a CQC-regulated care environment. • Strong understanding of regulatory requirements and inspection readiness. If you are considering your next step and would value a confidential conversation about whether this role fits your experience and career goals, please reach out to Max at Leaders in Care. (url removed)

Ready to find the right role for you? Salary: £45,192.64 per annum plus overtime and Veolia benefits Hours: 40 hours per week Location: 5 Park Road, Holmewood, Chesterfield, S42 5UY When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. Whether you're looking to overhaul the industry, or just do a good day's work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you: Refer an Engineer to us once you've joined and earn £1000 Access to our company pension scheme Free physiotherapy and 24/7 GP service Discounts on everything from groceries to well known retailers Access to a range of resources to support your physical, mental, and financial health Ongoing training and development opportunities, allowing you to reach your full potential What you'll be doing: Work as the senior team leader of a team of other electrical or mechanical engineers and mechanical fitters, often consisting of two or more engineers across a range of sites Carry out electrically complex and detailed asset overhauls and replacements Undertake complex electrical repairs and modifications dewatering equipment, pumps, pipework, valves and other ancillary equipment Working under CDM regulations on projects work Leading remedial work on dewatering EICA systems Troubleshooting on dewatering electrical systems: filtration, centrifuge Design and installation to WIMES of electrical control systems including switchgear Complete wiring and cabling works Carry out electrical inspections, services and repairs to customers' dewatering assets machines Undertake standby cover and overtime as required as well as flexibility to work away from home Complete test reports, installation certificates and customer feedback documents Complete customer paperwork such as permits to work and safety paperwork Please note some mechanical crossover is part of the role and the role will not be 100% electrical at all times What we're looking for: Previous experience in working in an industrial environment NVQ or a recognised apprenticeship in electrical engineering maintenance at Level 3 BS Inspection & Testing qualification & 18th Edition ICA experience Full UK Driving License Compex Trained Confined Space Trained First Aid Trained IOSH TrainedWhat's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

Warehouse and Logistics Operative Are you an unappreciated or frustrated Warehouse Operative, and feel that you have a lot more to offer your employer Are you full of great ideas but you don’t presently feel listened to, and could you add a whole lot more that would make the tasks even quicker, easier and better Do your efforts and performance successes go unrecognised by your present employer, or do you feel you’re not being rewarded appropriately for the results you are getting Do you love doing a great job on time, and fulfilling all your orders daily If you want to join an established business that will appreciate your successes, compensate you accordingly, and be an important cog in their growth plan, then this is the job for you! Our client is a Pump Retail Specialist based in Chesterfield and who supply nationally and have an in-house repair facility. They are seeking an experienced, passionate and results-oriented Warehouse and Logistics Operative, and someone who wants to progress their career. This is an important role, and you will be part of a growing, successful team who are focused on getting the business to the next level. Salary and Hours: Full-Time or Part-Time Pro Rata: £13 – £15 per hour plus overtime / bonus Full-time working in the office Monday – Thursday, 8:00am – 5:00pm and Friday, 8:00am – 4:00pm Benefits They Offer: Paid training Career growth opportunities Healthcare insurance after 2 years of continuous work Dental insurance after 2 years of continuous work Sick pay cover Early finish on a Friday Duties and Responsibilities: Book daily couriers, generate shipping labels, and ensure all dispatch paperwork is accurate. Pick, pack, and dispatch customer orders in a timely manner. Receive deliveries, check against purchase orders, and store goods correctly. Maintain accurate stock levels within the system, including regular stock counts and reporting shortages / overstock. Keep the warehouse / workshop organised, tidy, and compliant with health and safety requirements. Assist with returns, repairs, and customer collections, ensuring correct documentation and handling. Support workshop activities where required, including builds, hose assemblies, and basic equipment checks / cleaning. Telephone support to proactively advise customers on the progress of their shipment. Prepare equipment for servicing or dispatch (cleaning, visual inspection, basic prep work). Log stock movements into the CRM or accounting system (e.g. Sage) where required. Provide operational support to the wider team as needed. Results Expected: All customer orders are picked, packed, and dispatched accurately and on time each day. Courier bookings and shipping paperwork are completed correctly, ensuring no delays in collections or deliveries. Stock records are kept accurate through timely logging, counts, and reporting, reducing shortages and overstock. The warehouse / workshop is kept clean, organised, and safe, supporting efficiency and compliance with H&S. Returns, repairs, and customer collections are handled smoothly and professionally. Workshop and operational staff are supported effectively, freeing up their time to focus on core duties. Knowledge, Skills and Abilities: Ability to organise and prioritise daily tasks to ensure all orders are dispatched on time. Basic IT skills to use courier booking systems, generate labels, and update stock records. Understanding of safe manual handling practices and general health and safety awareness. Attention to detail to ensure accuracy in stock control, deliveries, and paperwork. Ability to work both independently and as part of a team, supporting colleagues when required. Willingness to learn about the company’s products and services to assist with workshop / operational tasks. A positive, practical attitude with the flexibility to adapt to varied duties within the role. Meet These Standards: Be punctual, reliable, and presentable always. Follow company health and safety rules and use safe manual handling practices. Complete tasks accurately and with attention to detail, reducing errors and delays. Maintain a clean and organised work area, taking pride in the company’s facilities. Communicate clearly with colleagues, supporting teamwork and smooth handovers. Experience Needed: Practical, hands-on work (e.g. warehouse, workshop, trade, or similar). Use of basic IT systems for tasks such as data entry, printing labels, or booking deliveries. Working in a team environment and following instructions accurately. Maintaining a tidy and organised workspace. Handling goods, tools, or equipment safely. Other Requirements: Physically able to carry out manual handling tasks (lifting, moving, and packing goods safely). Willing to work flexibly, supporting other areas of the business when required. Prepared to work occasional overtime during busy periods to ensure orders are dispatched on time. Comply with all company health, safety, and environmental procedures. Maintain a positive and proactive attitude, even when carrying out repetitive or varied tasks. In Summary If you want to join a well-established business and be a catalyst for their future growth, then this is the job for you! Come join our client’s team and contribute to their mission of delivering Exceptional Pumping Installations and Servicing. Their selection process is unique in the marketplace and attracts motivated, productive team members, who they know will be successful and have a great career with them. They look forward to hearing from you. Don't miss this opportunity. Start your application NOW

Experienced Design Engineer sought for a specialist Original Equipment Manufacturer (OEM) of pedestrian operated electric tugs and utility vehicles designed to manoeuvre industrial loads. Our client combines their specialist knowledge and experience with manufacturing ability to provide customers with a completed solution. Over 80% of their production is exported to Europe, Asia, Africa, Middle East, Australia and New Zealand. Design Engineer Role: • Create innovative 3D design concepts, GA & Manufacturing drawings in response to application data gathered from the customer., • Ensure design meets manufacturing, technical, cost and customer requirements whilst keeping safety and quality at the forefront of every decision., • Active participation in design reviews and technical discussions., • Identification of suitable suppliers for required parts and components., • Production of design calculations and reports, bill of materials, operations and maintenance manuals, test documents, risk assessments and other documents as necessary., • Ability to prioritise and manage multiple workflows according to project budget and timescale., • Inspection of ordered goods upon delivery, as required, to ensure conformity to purchase order and other specific requirements., • Practical and hands-on shopfloor build as required - overseeing manufacture, assembly and testing activities. Design Engineer Requirements: • Engineering Degree Qualification or HND., • Fully proficient (min. 3 years) with CAD, SolidEdge beneficial., • Creation and ongoing maintenance of BOMs., • Previous experience / strong personal interest in DC electric motors, motor controllers and wiring would be a significant advantage., • Fully proficient with MS Office., • Proven ability to communicate Engineering proposals and concepts to customers., • Experience with FEA preferred, but not essential., • Excellent problem-solving skills with a genuine ‘can-do’ and innovative attitude., • Any foreign language skills would be an advantage. Fluent English essential., • A good timekeeping and attendance record. Design Engineer Benefits: Competitive Salary, 38.5 hour working week, 24 Holiday Days + Bank Holidays, rising with length of service, Company Pension (9% Employer + 5% Employee), ‘Early-Finish’ Fridays, Free on-site parking. Design Engineer Applications: This vacancy is only available to Candidates with relevant experience as detailed in the job description. Due to volume of applications, we are unable to respond to applicants who do not possess the required skills and experience. Recent Graduates who do not have the required level of industry experience need not apply. Candidates must be authorised to work in the country where this role is located BEFORE making an application

Are you a skilled Rolling Stock Technician looking for your next challenge in the rail industry? Looking for a role where your expertise is valued, your impact is visible, and no two shifts are ever the same? If so, TXM Recruit are working in partnership with a high-profile railway client. They are expanding their projects and are looking for multiple Rolling Stock Technicians to join their team located in the East Midlands on a contract basis. This role is paying £19 per hour (circa £40,000 per annum). Key Accountabilities: Servicing, maintenance, repair and overhaul of traction and rolling stock components and plant equipment inspection. Ensuring that as part of a team, your own and your team’s work targets are met. Carry out all work to agreed standards and that all work undertaken is recorded and “signed off” on the prescribed documentation. Support and give guidance to all members of the team. Fault finding on rolling stock as directed by Team LeaderSpecific Experience: Qualified to NVQ Level 3 standard in a relevant mechanical/electrical (or dual-skilled) engineering or maintenance discipline (e.g. Traction and Rolling Stock) or have completed a recognised apprenticeship. Practical experience of mechanical and electrical discipline desired. Knowledge of ISO 9002 and ISO 14001, IMS and Safety regulations. Competent in Depot Protection System. Main Details: Job Title: Rolling Stock Technicians Location: East Midlands Contract: 6 Months (ongoing) Pay Rate: £19.46 per hour (circa £40,000 per annum) Hours of Work: Monday to Friday – 07:00 – 19:00 (60 hours per week) Shortlisted candidates will be required to pass an online safety assessment and safety critical medical before an offer can be made. This is a fantastic opportunity to join an exciting, friendly, and fast paced team, delivering essential services. TXM Recruit is an equal opportunities employer. If you have any specific requirements or require assistance or reasonable adjustments to be made for you during the selection process due to disability or long-term health condition, we will do our best to assist you. If you want to register your interest and apply, please contact me on the below or apply online: Miren Chauhan Delivery Consultant Email: (url removed)

Production Operative Days Immediately required for regular ongoing work - with a genuine opportunity for permanent employment £12.96 to £13.44 per hour - weekly pay - overtime available Hours of work: 6am to 6pm or 5:30am to 5:30pm Monday to Thursday *This is accessible with public transport - train or bus Working in a Foundry - training is provided Based in North East Derbyshire, Dronfield area Duties of a Production Operative Days Working in a foundry environment Machine Operating Knocking off castings Pouring molten metal Grinding / angle grinding - using power tools Quality Inspection Using overhead cranes and PPT trucks All training will be provided Heavy, physical work Experience of a Production Operative Days Ideally worked in a foundry / factory environment / machine operating role before Machine Operating Power tools Hand tools Worked in manufacturing and production environment Detail of a Production Operative Days £12.96 to £13.44 per hour - weekly pay Monday to Thursday Immediate starts Genuine opportunity for permanent employment Days 6am to 6pm or 5am to 5:30pm - overtime available Physical Work Worked in manufacturing and production within a foundry Based in North East Derbyshire, Dronfield area If you are interested in the Production Operative days role - please click apply The Job People is acting as an Employment Business in relation to this vacancy. We are an Equal Opportunities employer and welcome applications from all backgrounds. We do not charge candidates any fees or request deposits at any stage of the recruitment process. By applying for this position, you agree to The Job People holding and processing your personal data in accordance with our Privacy Policy on our website

£28-32/hour Umbrella PAYE Exciting Opportunity for a Highway Inspector in Derbyshire An excellent opportunity has arisen for a reliable and experienced Highway Inspector to join my client's highway maintenance team in Nottinghamshire. This is a key role responsible for ensuring the safe condition of the highway network, assisting with reactive maintenance works and statutory inspections in line with the Highways Act 1980. The ideal candidate will have experience in highway inspection and maintenance, with a strong focus on safety, record-keeping, and compliance. The main duties of the Highway Inspector include: ·Inspecting, investigating and ordering necessary works to maintain the highway network safely. ·Conforming to relevant legislation, policy and codes of practice for highway maintenance. ·Maintaining accurate records for inspection, maintenance and to support statutory defence in case of legal claims. ·Investigating third-party insurance claims, providing inspection records, and attending court as necessary. ·Liaising with a range of stakeholders including elected members, the public, emergency services and neighbouring authorities. ·Inspecting works completed by in-house teams, contractors and third parties, ensuring compliance with relevant standards. ·Reporting on the need for more substantial works such as resurfacing or reconstruction. ·Assisting with the enforcement of highway safety legislation and ensuring safe working practices on site. ·Contributing to the development of new technology, systems, policies, and procedures for effective service delivery. The Highway Inspector will have key experience in: ·Highway or civil engineering construction methods and maintenance treatments. ·Experience using specialist IT software systems, databases, and spreadsheets. ·Managing their own workload, working methodically, and maintaining accurate records. ·Performing dynamic risk assessments and maintaining a professional approach. ·A minimum of 3 years' experience in highway inspection. ·A valid NRSWA accreditation. ·A valid LANTRA Highway Inspection ticket. ·A full UK driving licence and the ability to travel independently. For more details and to apply for the role, please call James Allbon at Carrington West on (phone number removed) or email . FOOTNOTE: If you feel that you are right for this role technically, but the rate, location, or seniority does not suit you specifically, please still feel free to send us your CV. We constantly recruit for similar roles at all levels across the UK. We are always keen to chat with you discreetly about your employment situation. Even if you are happy in your current role for now, we always welcome calls from Highway, Construction, and Local Government professionals looking to explore future opportunities. Our specialist team has over 40 years of combined experience in this market. Please contact James Allbon at Carrington West on (phone number removed) for more information. By applying for this position, you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third-party clients specifically relevant to any roles you have applied for. If at any stage, you wish to withdraw your consent, please email (url removed)

Location: Chesterfield Start Date: ASAP Duration: Ongoing (with potential for permanent role for the right candidate) Approach Personnel are currently seeking an experienced Site Manager to join a traditional build housing development in Chesterfield. This is a front-end focused role on a live residential scheme consisting of 15 plots, with 6 already roofed. The project is traditional construction (not timber frame) and includes brickwork, scaffold, and roofing packages progressing on site. We are looking for someone with strong experience in early-stage and front-end site management, ideally within residential developments, and confident overseeing brickwork, scaffold, and roofing operations. Key Responsibilities • Manage day-to-day site operations across a traditional build housing scheme, • Oversee subcontractors across brickwork, scaffold, and roofing packages, • Coordinate site activities across multiple plots and ensure smooth workflow between trades, • Ensure safe systems of work for scaffold erection, inspection, and ongoing use, • Oversee roofing works including sequencing, safety compliance, and quality control, • Manage brickwork progress and ensure build quality and programme alignment, • Maintain strict Health & Safety standards including inductions, RAMS, and site compliance, • Monitor progress across all plots and drive programme delivery, • Carry out quality inspections, snagging, and handover preparation, • Liaise with subcontractors, suppliers, and project stakeholders Essential Requirements • Valid SMSTS certification, • Valid First Aid at Work (FAW), • Valid CSCS Card (Black card preferred), • Scaffold Inspection Ticket (essential), • Proven experience in traditional build residential schemes, • Strong front-end site management experience, • Confident managing brickwork, scaffold, and roofing packages What We Offer • Ongoing work with long-term stability, • Potential for permanent position for the right candidate, • Opportunity to work on a progressing residential development, • Immediate start available Apply Now To apply, please send your CV along with your qualifications, availability, and salary/day rate expectations. If you would like to discuss the role before applying or require any further information, please feel free to get in touch directly. Applications will be reviewed on a rolling basis due to the urgent requirement

CNC Turner – Programmer / Setter / Operator Location: Chesterfield Pay Rate: £17.00 – £18.00 per hour Full-Time | Permanent We are currently recruiting for an experienced CNC Turner to join a well-established and growing engineering company. This is an excellent opportunity for a skilled machinist with strong programming, setting, and operating experience on CNC lathes using Fanuc controls. The Role You will be responsible for programming, setting, and operating CNC turning machines while ensuring components are produced to high-quality standards and tight tolerances. Key Responsibilities: Programming, setting, and operating CNC lathes with Fanuc controls Reading and interpreting engineering drawings Working to tight tolerances and high precision standards Setting tools and understanding cutting speeds and feeds Producing programs using G Codes including Using inspection and measurement equipment including: Deburring machined components during production cycles Maintaining a safe, clean, and organised working environment Working in line with ISO9001 quality standards Candidate Requirements Proven experience as a CNC Turner / Programmer / Setter / Operator Strong knowledge of Fanuc controls Ability to work independently and as part of a team Good attention to detail and quality standards Positive and proactive attitude Strong communication and organisational skills Flexible approach and willingness to learn and improve What’s on Offer Competitive hourly rate of £17–£18 per hour Overtime opportunities available Stable, long-term opportunity Supportive working environment Excellent career progression prospects If you are an experienced CNC Turner looking for your next opportunity, apply today

CNC Machinist Location: Barton Under Needwood Rate: £18.99 per hour (PAYE) Contract: 6 Month Contract or Permanent Hours: 40 hours P/W • Monday – Thursday: 7:00am – 4:00pm • Friday: 7:00am – 1:00pm Overtime: Available The Opportunity Join a well-established rail engineering team working out of a brand new purpose built facility on critical components that keep the UK moving. This is a great opportunity for a skilled CNC Machinist looking for stability, great hours, and a long-term career path in a safety-critical industry. The Role You’ll be at the heart of precision machining, producing and restoring high-value rail components to tight tolerances and exacting standards. This is a hands-on, varied role where quality and attention to detail are key. Key responsibilities include: • CNC and manual machining (lathes & milling) • Working from engineering drawings and procedures • Precision inspection using metrology equipment • Fault finding and solving machining challenges • Maintaining high quality and safety standards • Supporting 5S and continuous improvement • Assisting and mentoring junior team members Required Experience & Skills Essential: • CNC machining experience (rail, automotive, or similar) • Strong mechanical mindset with hands-on ability • Confident working to tight tolerances • Good math's and measurement skills (metric & imperial) • Self-motivated and able to work independently • Comfortable in a fast-paced, physical environment Desirable: • Mentoring or training experience • Knowledge of 5S / continuous improvement Machine Experience Experience with the below is highly advantageous: Rottler CNC Equipment • F98Y, F79A, F69A • 3 Axis CNC (live tooling) Typical tasks: • Reboring and refacing engine blocks • Line boring bearings and housings • Sleeving transmission casings • Reworking engine components • Basic TPM activities Crank Grinding • Robbi REX 2200 RM (Manual / Semi Auto) Tasks include: • Grinding crankshaft journals • Polishing and finishing components • Wheel dressing and balancing • TPM activities Metrology & Inspection You’ll be working to micron-level tolerances, using: • Verniers, micrometres (internal & external) • Dial indicators, height gauges • Go / No-Go gauges, slip gauges Accuracy and attention to detail are essential. Apply Now If you’re a CNC Machinist looking for solid hours, overtime, and a long-term opportunity in rail, this is your chance. About Ford & Stanley Group Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing, and retaining the best talent from shop floor to boardroom. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services – permanent and temporary. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. Ford & Stanley Executive Search – Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy. Services advertised by Ford & Stanley are that of an employment consultancy business