Offres low level à ChesterCréer des alertes d'emploi

Binnies are recruiting for a Consultant Ecologist to have a key role in our Chester-based team area within our growing Ecology team (a CIEEM Registered Practice). We have a strong focus on high quality survey and assessment combined with biodiversity enhancement and restoration across our portfolio of work at all scales and sectors including flood, coastal and maritime, water utilities, transport and renewable power. This key role would also support our growing portfolio of work in England and Wales including natural capital projects and Solutions By Nature; our RSK joint venture providing nature-based solutions via blue-green infrastructure to the water industry.You would be a key part of our national Environmental team and work with our ecologists, landscape architects and other specialists to drive the quality of our surveys and assessments across diverse projects including new reservoir development, river restoration, catchment management, SSSI assessment and coastal management.We are already developing new approaches through our Biodiversity Net Gain (BNG), GIS and Digital Ecology specialists to optimise the use of technology in collecting data and this role would have the benefit of being supported by and learning from the outputs of these exciting work areas.Depending on your skill sets and interest there would also be the opportunity to undertake wider ecological assessment, design and survey work. The successful applicant will be able to author concise and accurate reports to industry good practice guidelines, including methods and results of surveys and Preliminary Ecological Appraisals (or equivalent level reporting). There will be support to learn and input to Ecological Impact Assessment and Habitats Regulations Assessment, as relevant to your specialist interest areas.Our focus for this role is to support our growing and varied project workload in the West of England and Wales and it is expected that frequent site attendance to support these projects will be required. You would be welcome in our excellently-located Chester office as a full time or hybrid worker.Binnies is an Ecological Registered Practice (CIEEM) and Landscape Practice (Landscape Institute) and holds the IEMA EIA Quality Mark, which is a benchmark of our high standards in EIA delivery.About the RoleTo support Binnies in our ambitions for our Ecology team, the role would involve:Working with the Binnies ecology management team to deliver high-quality ecological surveys and reporting, alongside supporting the development of more junior team members.Providing advice on survey requirements to clients and internal project management teams.Discussing proposed survey protocols and site-specific survey plans with internal project teams, including the writing of site and task specific risk assessments.Leading survey teams for specialisms you are qualified and/or licenced in, including the management and analysis of recorded data.Authoring technical reports or report sections for work you have undertaken.Authoring Preliminary Ecological Appraisals and contributing to Ecological Impact Assessments and Habitats Regulations Assessments (with support from more experienced colleagues).Working with our BNG, Nature Recovery, GIS and Digital specialists to maximise use of technology to optimise surveys and reporting.If you would like to discuss the role in advance of making a formal application, please contact our Ecology Team Leader Owen Peat [email protected]Qualifications/RequirementsThe role is suitable for an Ecology professional with several years’ experience and working towards full membership of CIEEM or equivalent. You should possess and be able to demonstrate the following qualifications, skills and knowledge:Have an ecological/environmental related degree.Experience of undertaking habitat survey of non-complex sites, preferably using UKHab (or Phase 1 in Wales).Experience of working under statutory survey licences (carrying out survey work under your own licence or accredited under someone else’s).Competence and experience of utilising standard survey guidance, survey techniques and appropriate survey equipment.Competence in the development of risk assessments for the activity to a suitable standard and in accordance with Binnies’ strong commitment to health, safety and wellbeing.Experience of delivering Preliminary Ecological Appraisals for non- complex sites.Have excellent written and oral communication.Enjoy innovation and embracing advances in technology and ecology.Hold a full UK driving licence.Desirable Experience IncludesHolding a protected species survey licence.Data analysis software experience.Field survey data collection app experience (e.g. Field Maps, Survey123).Ecological Impact Assessment experience.Protected Species Mitigation licencing experience.Ecological Clerk of Works experience.Previous consultancy experience.About UsWe develop intelligent solutions using our award-winning integrated planning and design approach to deliver functional infrastructure and lasting environmental and social legacies. This is backed by a culture that has stayed true since our foundation over 100 years ago. We create new possibilities for humanity through our innovative approach to delivery.Together with our clients, we are always striving to find a smarter way to deliver projects. From providing low carbon, sustainable and resilient water solutions, flood alleviation and environment services, to connecting people with insights and data. Our business exists to improve the quality of life for our local communities today and for generations to come.Binnies is part of the RSK Group, a leading integrated environmental, engineering, and technical services business providing dynamic, multidisciplinary services to a wide range of sectors. RSK was founded in 1989 and has grown considerably since then.At RSK, we operate as a group of businesses that work together seamlessly, aiming for growth through diversification. Our strategy helps us build a strong and resilient business, capable of weathering external challenges, while also providing greater value to our clients and more opportunities for our employees.Since the beginning, our philosophy has remained the same: employ, develop and reward talented individuals. People are crucial to our company, and we recognise that our success hinges on our colleagues' growth. We're committed to preserving RSK's people-first culture, promoting innovation, and fostering a supportive and caring environment for collaboration. At RSK, we want you to be part of our successes and help you reach your career aspirations. We take pride in offering employees fulfilling and challenging careers by promoting ongoing growth and empowering individuals to excel.We are committed to fostering an inclusive workplace that welcomes individuals from all backgrounds, experiences, and perspectives. We firmly believe that embracing and celebrating the diversity in our workforce makes us a stronger and more innovative company.If you're passionate about making a difference, join us as we work together to build a brighter, more equitable, and sustainable future for all. Do you have what it takes?

The Digital Strategy Consultant serves as a trusted advisor to enterprise customers, partnering with them to design and execute transformational SEO and GEO strategies that drive measurable business outcomes. This role leads structured discovery, develops multi-quarter strategic roadmaps, and guides customers in building scalable operating models that embed SEO and GEO into their broader digital marketing ecosystem. The Digital Strategy Consultant works cross-functionally with Sales, Customer Success, and Product to ensure strategic alignment, accelerate time-to-value, and support long-term customer growth within the Enterprise segment. Tasks in the role Strategic Advisory, Discovery & Roadmapping: Serve as a strategic advisor to enterprise customers by leading structured discovery engagements to assess SEO and GEO maturity, operating models, workflows, and organizational readiness. Conduct in-depth opportunity analysis and competitive benchmarking, synthesizing complex insights into executive-ready recommendations. Translate findings into phased, multi-quarter SEO and GEO roadmaps aligned to measurable business outcomes, clearly defining priorities, milestones, and success criteria. Governance, Adoption & Operating Model Transformation: Design scalable SEO and GEO governance frameworks and operating models that enable long-term adoption and cross-functional alignment. Establish scalable standards for workflows, accountability, reporting, and cross-functional collaboration across Marketing, Product, Engineering, and Content teams. Guide customers through change initiatives, stakeholder alignment, and rollout sequencing while diagnosing inefficiencies and recommending process optimizations that increase operational efficiency and reduce friction. Executive Facilitation & Program Leadership: Lead structured workshops, prioritization sessions, and executive briefings to define outcomes and align stakeholders throughout the customer lifecycle, ensuring strategic alignment and long-term value realization.. Track performance against milestones and KPIs, proactively identify risks and implementation blockers, and recommend course corrections as business priorities evolve. Lifecycle Strategy & Growth Alignment: Partner closely with Sales, Customer Success Managers, and Product teams to ensure strategic continuity throughout the customer lifecycle. Identify opportunities for expanded engagement and deeper alignment between customer goals and Semrush capabilities. Act as the voice of the customer by surfacing insights, risks, and product enhancement opportunities that support enterprise digital transformation. Internal Strategy & Methodology Contribution: Contribute to the evolution of internal playbooks, consulting frameworks, and delivery methodologies that increase leverage and consistency across Strategic Services. Share patterns, insights, and best practices to continuously elevate enterprise strategy delivery. 8+ years of experience in digital strategy, SEO and GEO consulting, change management, enterprise advisory, or related roles within SaaS or MarTech environments Proven experience leading structured discovery engagements and translating insights into actionable, executive-level strategic roadmaps Demonstrated ability to design scalable operating models, governance frameworks, and cross-functional workflows Experience influencing senior stakeholders and driving strategic alignment at the Director and VP level. Strong expertise in SEO and GEO strategy, competitive analysis, and performance measurement with the ability to clearly connect strategic initiatives to commercial outcomes. Exceptional facilitation, stakeholder-management, and executive communication skills Ability to identify risks early, manage ambiguity, and re-prioritize initiatives in dynamic enterprise environments Experience working cross-functionally with Marketing, Product, Engineering, and Executive stakeholders Comfortable managing multiple strategic engagements simultaneously while maintaining high-quality outcomes Not required, but a plus Experience with enterprise-level SEO and GEO and digital marketing platforms such as Semrush, BrightEdge, Conductor, Botify, SimilarWeb, or others Familiarity with AI-driven search trends, content strategy frameworks, and advanced analytics integrations Background in digital marketing consultancy or professional services environments Semrush is a brand visibility platform, empowering marketers to command their online presence and create measurable impact. We unify SEO authority and AI visibility, so brands are found, cited, and chosen everywhere search happens. That's how Semrush gained the trust of over 28 million users-from scaling startups to Fortune 500 companies. Some highlights of our success: $470M+ Annual Recurring Revenue with AI products surpassing $38M+ Dollar-based net revenue retention of 104%, as of December 31, 2025 Large deals growing 74% YoY Semrush named a Leader in The Forrester Wave : Search Engine Optimization Solutions, Q3 2025 Exceptional demand for the Enterprise platform, with deals with global giants like JP Morgan, LG, Samsung, TikTok, and others Shared ambition makes a bigger impact. That's why at Semrush, progress is a partnership: You push us forward, we push you further-and we all move as one. Are you ready to be part of this journey? About the opportunityThe Sales team is at the forefront of empowering businesses to achieve online visibility and digital marketing success. Through our selling approach and world-class enablement programs, we equip our team with the tools, resources, and training. This is how we keep delivering meaningful results for our customers. Joining the Sales team also means: Fast forward and continuous career growth: the highest rate of promotions within the organization A team spread across 40+ locations around the globe Offline and online bootcamps as part of our onboarding process President's club-an opportunity to celebrate exceptional results and reward top performers in high-class vacation destination Quota attainment has been recognized as higher than market average, according to RepVue Uncapped commissions About your future tasks About Semrush Consulting Services Semrush Consulting Services is a team of digital strategy consultants, technical experts, and engagement managers who partner with enterprise customers to accelerate platform adoption and unlock measurable value across SEO and GEO, content strategy, competitive intelligence, and broader digital marketing ecosystems. We deliver high-impact onboarding, advisory, implementation, and enablement services across the customer lifecycle. Our team works alongside some of the world's most sophisticated marketing organizations to design scalable operating models, optimize workflows, and build sustainable digital growth systems that drive long-term business impact., A little more about the companySemrush is the leading brand visibility platform, empowering marketers to command their online presence and create measurable impact. Built on the industry's most expansive proprietary dataset, Semrush delivers AI-driven insights across GEO, SEO, Agentic Search Optimization, content marketing, paid media, and social strategy. The company was founded in 2008 and is headquartered in Boston, MA with a global presence across North America, Europe and Asia. We've built something people are proud to be part of. And the awards agree: Great Place to Work, DEI Workplace, Diversity Champion Award, International Inclusion Award, Most Women Friendly Employers, Best Place for Working Parents. All thanks to 1700+ employees who build the company every day. About our Diversity, Equity, and Inclusion commitments Semrush is an equal opportunity employer. We are committed to ensure that everyone feels a sense of belonging in the workplace. We do not discriminate based upon race, religion, creed, color, national origin, sex, pregnancy, sexual orientation, gender identity, gender expression, age, ancestry, physical or mental disability, or medical condition including medical characteristics, genetic identity, marital status, military service, or any other classification protected by applicable local, state or federal laws. We don't just lead the market-we are busy creating a world where Semrush is an unfair advantage for every marketer. Join us! The annual Total Cash Compensation range for this position is $131,000 to $190,000. Compensation ranges for the same role in other countries may differ based on local market conditions, compensation philosophy, and regulatory requirements. Compensation ranges for this role outside of the United States may differ and will be determined based on local market benchmarks, compensation practices, and applicable regulations. • Strong product-market fit recognized by RepVue, • High earning potential with clear quota attainment visibility, • Life insurance, • Low cost medical, dental, and vision plans, • Accidental death and dismemberment (AD&D) insurance, • Dependent Care Savings Accounts and Flexible Spending Accounts, • Health Savings Account, • Short-term and long-term Disability, • Employee Assistance Program, • Employee Resource Groups, • Paid parental leave, • Relief Fund, • Travel coverage #J-18808-Ljbffr

Help us to make a world of difference Urenco is a global leader in the production of low-carbon energy, playing a critical role in delivering secure, reliable nuclear fuel solutions worldwide. We are focused on enabling the sustainable generation of electricity for customers around the world while operating to the highest environmental, social, and regulatory standards. In addition, as part of a strategically important industry, Urenco is now required to support the UK Government in exploring options to re-establish nuclear fuel capabilities to produce reactor fuel for defence purposes. To support this new project, we are seeking a Physics Scientist to join our Capenhurst/Birchwood site. In this role, you will work within our Government Services function as a key interface between site teams and Group stakeholders to ensure effective planning, coordination, and delivery across complex programmes. You will provide scientific and technical expertise to support the development, verification, and assurance of advanced process technologies and facility designs. You will contribute to the design and analysis of complex process systems through scientific modelling, simulation, and computational analysis, ensuring solutions meet safety, performance, and operational requirements. Acting as a delegated Design Authority within your area of expertise, you will support new technology development, provide governance and oversight throughout the asset lifecycle, and contribute to the advancement of innovative methodologies, digital solutions, and artificial intelligence applications across Urenco's operations. At Urenco, we're committed to helping you be your best. If you feel you meet some, but not all, of what we're looking for, we still encourage you to apply. We believe in embracing the passion and potential of our people and offer market-leading training, development, coaching, and mentoring opportunities from some of the brightest minds in the industry. • Provide scientific analysis and computational modelling to support design development and design assurance activities., • Review and approve designs within your area of expertise as delegated Design Authority., • Develop and apply innovative methods, tools, and techniques to optimise process performance and safety., • Support the application of artificial intelligence and advanced technologies within complex process environments., • Provide governance and oversight of design development, project execution, operations, and decommissioning activities., • Establish, maintain, and develop Group Reference Designs and safety case standards., • Conduct design reviews and support supplier oversight activities where required., • Ensure designs align with regulatory, operational, safety, and business requirements., • Promote a proactive safety culture and learning-from-experience approach., • Ensure plant designs incorporate appropriate safety features and industry best practice., • Lead Post Implementation Reviews and support continuous improvement activities., • Support safety case development and design substantiation through technical analysis., • Carry out troubleshooting and debottlenecking investigations for operational facilities., • Analyse complex process and measurement data to identify performance improvements and root causes of events., • Support site teams with specialist technical expertise to resolve operational challenges., • Provide expert advice on core technology and complex process systems. Master's Degree or PhD in Physics, Mathematics, Mechanical Engineering, Nuclear Science, Advanced Technology, or a related discipline. • Recognised specialist within a relevant scientific or technical discipline., • Demonstrable experience supporting the design and delivery of complex process facilities., • Experience applying scientific methods, modelling, and analysis to engineering challenges., • Strong knowledge of computational physics, mathematics, modelling, and simulation techniques., • Ability to analyse complex systems and data to solve technical problems and optimise performance., • Experience supporting safety case substantiation, process development, or technology innovation., • Strong analytical, problem-solving, and communication skills., • Results-focused with a commitment to high performance and quality., • Customer-focused and solutions-oriented approach., • Strong analytical and decision-making capability., • Commitment to safety, innovation, and continuous improvement. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future #J-18808-Ljbffr

Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We are seeking a Technical Safety Specialist (Project Support) to join our Capenhurst site. You will be responsible for implementing and embedding technical safety frameworks across Urenco's project portfolio. Working across nuclear, process, electrical, chemical, machinery, lifting, and stored energy disciplines, you will provide practical guidance that enables projects to implement safety requirements effectively throughout the project lifecycle. You will support project teams from concept design through commissioning and handover, supporting hazard studies, supporting technical safety assessments, and ensuring alignment with Design Authority standards, regulatory requirements, and industry best practice. • Support the implementation of technical safety frameworks across major projects and programmes located globally., • Develop practical guidance, procedures, templates, and working documents to support project delivery., • Promote a proactive safety culture and support the achievement of HSE objectives across the project portfolio., • Provide specialist technical safety advice to project teams and stakeholders., • Facilitate and contribute to HAZID, HAZOP, and LOPA studies., • Support functional safety assessments, SIL determination, and safety verification activities., • Undertake or support fire risk assessments, consequence modelling, and risk assessments where required., • Ensure technical safety risks are identified, assessed, and managed effectively throughout project delivery., • Work closely with Design Authority, R&D teams, subject matter experts, and project teams to ensure safety requirements are integrated into designs., • Review technical documentation, engineering assessments, and safety deliverables., • Support commissioning, safety-critical equipment verification, and handover activities., • Ensure compliance with relevant legislation, regulations, and Urenco standards., • Promote lessons learned, best practice, and knowledge sharing across projects., • Support the development of technical safety processes, methodologies, and training requirements., • Contribute to assurance activities, audits, inspections, and performance reviews., • Maintain awareness of industry developments and emerging best practice., • Degree qualified in Engineering, Science, Health & Safety, or a related discipline., • Chartered status or postgraduate qualifications desirable., • Membership of a relevant professional institution desirable., • Experience delivering technical safety (Process Safety) support within high-hazard or highly regulated environments., • Demonstrable experience in Health, Safety and Environmental management systems., • Experience supporting major engineering, construction, or infrastructure projects., • Experience developing or implementing technical safety improvement initiatives., • Strong understanding of technical safety, hazard identification, and risk management., • Experience supporting HAZID, HAZOP, LOPA, and related safety studies., • Knowledge of relevant HSE legislation, regulatory requirements, and industry best practice., • Strong stakeholder management, communication, and influencing skills., • Results-focused with a commitment to safety excellence., • Strong analytical and problem-solving capability., • Collaborative and customer-focused approach., • Committed to continuous improvement and knowledge sharing. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future. #J-18808-Ljbffr

Urenco is a global leader in the production of low-carbon energy, playing a critical role in delivering secure, reliable nuclear fuel solutions worldwide. We are focused on enabling the sustainable generation of electricity for customers around the world while operating to the highest environmental, social, and regulatory standards. In addition, as part of a strategically important industry, Urenco is now required to support the UK Government in exploring options to re-establish nuclear fuel capabilities to produce reactor fuel for defence purposes. To support this new project, we are seeking a Physics Scientist to join our Capenhurst/Birchwood site. In this role, you will work within our Government Services function as a key interface between site teams and Group stakeholders to ensure effective planning, coordination, and delivery across complex programmes. You will provide scientific and technical expertise to support the development, verification, and assurance of advanced process technologies and facility designs. You will contribute to the design and analysis of complex process systems through scientific modelling, simulation, and computational analysis, ensuring solutions meet safety, performance, and operational requirements. Acting as a delegated Design Authority within your area of expertise, you will support new technology development, provide governance and oversight throughout the asset lifecycle, and contribute to the advancement of innovative methodologies, digital solutions, and artificial intelligence applications across Urenco's operations. At Urenco, we're committed to helping you be your best. If you feel you meet some, but not all, of what we're looking for, we still encourage you to apply. We believe in embracing the passion and potential of our people and offer market-leading training, development, coaching, and mentoring opportunities from some of the brightest minds in the industry. • Provide scientific analysis and computational modelling to support design development and design assurance activities., • Review and approve designs within your area of expertise as delegated Design Authority., • Develop and apply innovative methods, tools, and techniques to optimise process performance and safety., • Support the application of artificial intelligence and advanced technologies within complex process environments., • Provide governance and oversight of design development, project execution, operations, and decommissioning activities., • Establish, maintain, and develop Group Reference Designs and safety case standards., • Conduct design reviews and support supplier oversight activities where required., • Ensure designs align with regulatory, operational, safety, and business requirements., • Promote a proactive safety culture and learning-from-experience approach., • Ensure plant designs incorporate appropriate safety features and industry best practice., • Lead Post Implementation Reviews and support continuous improvement activities., • Support safety case development and design substantiation through technical analysis., • Carry out troubleshooting and debottlenecking investigations for operational facilities., • Analyse complex process and measurement data to identify performance improvements and root causes of events., • Support site teams with specialist technical expertise to resolve operational challenges., • Provide expert advice on core technology and complex process systems., • Master's Degree or PhD in Physics, Mathematics, Mechanical Engineering, Nuclear Science, Advanced Technology, or a related discipline., • Recognised specialist within a relevant scientific or technical discipline., • Demonstrable experience supporting the design and delivery of complex process facilities., • Experience applying scientific methods, modelling, and analysis to engineering challenges., • Strong knowledge of computational physics, mathematics, modelling, and simulation techniques., • Ability to analyse complex systems and data to solve technical problems and optimise performance., • Experience supporting safety case substantiation, process development, or technology innovation., • Strong analytical, problem-solving, and communication skills., • Results-focused with a commitment to high performance and quality., • Customer-focused and solutions-oriented approach., • Strong analytical and decision-making capability., • Commitment to safety, innovation, and continuous improvement. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As a valued member of our team, you will receive: • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. #J-18808-Ljbffr

IKO Industries Ltd. is a market leader in the manufacturing of roofing and building materials. IKO is a Canadian owned and operated business with production facilities worldwide and has many years of unparalleled success in the roofing materials industry. Quality, integrity, and trustworthiness are the values that underlie this success, and we have built this company by hiring people who hold these values. People like you! Location: IKO Glass Fiber Inc., Chester, SC Department: Production Type: Full Time (FT/PT/Cont) IKO Industries Ltd. is a market leader in the manufacturing of roofing and building materials. IKO is a Canadian owned and operated business with production facilities worldwide and has many years of unparalleled success in the roofing materials industry. Quality, integrity, and trustworthiness are the values that underlie this success, and we have built this company by hiring people who hold these values. People like you! • Competitive salary, • Competitive health and benefit plan, • Competitive matched retirement savings program, • The opportunity to join a continuously growing organization with focus on Diversity and Inclusion, • The opportunity to work with an industry leader in manufacturing, • Must have the ability & willingness to perform at the expected level of attendance at IKO Glass Fiber; to work every day, on time, as scheduled., • Promote and maintain IKO safety goals and ensure a safe work environment for all employees. Leads safety and housekeeping efforts and corrective actions within assigned projects and areas. Exemplifies safety in all actions and leads by example., • Responsible for meeting established goals and objectives. Acts as a technical resource for the organization., • Utilizes SPC methods and six sigma methodology to eliminate special cause and reduces common cause variation while striving for continuous improvement., • Ensures customer satisfaction through process control and standardization. Operates, control and maintains furnace and forehearth to ensure safe, efficient, and cost-effective operation. Monitors energy prices and usage and recommends the most cost-effective energy input. Monitors furnace and forehearth condition and takes appropriate preventive actions to prevent furnace outage or leaks. Knows response to power outage procedures, as well as glass leak procedures, etc., • Writes and maintains job instructions, process setup sheets and process check sheets utilizing coach and primary employee feedback., • Initiate cost reduction ideas into the fiberglass melting and forming process to further the goal of being the safest, high-quality, low-cost fiberglass producer. Conducts production trials with both product and or process improvement studies that support continued improvement efforts., • Directs multiple projects simultaneously and prioritizes completion of projects according to company objectives. Documentation of projects and process changes are communicated and updated., • Ensure process setups are documented, communicated, and adhered to on a daily basis to meet customer and company standards., • Maximizes production efficiency. Identifies opportunities for productivity improvements and takes appropriate action. Optimizes existing processes and products., • Responsible for all aspects of the assigned manufacturing processes, including batch, furnace, and sizing, as well as safety, value (productivity) and quality., • Maximizes furnace life through inspections, repairs, and maintenance as well as proper operational control (temperature, pressure, etc.)., • Orders and inventories supplies needed to maintain furnace and forehearth area., • Trains, develops, and works with furnace techs to ensure stable and consistent furnace operations., • Trials new raw materials and gathers data to support or disprove merit., • Monitor the condition of all equipment in the batch, furnace and forehearth area and initiate necessary repairs needed to meet performance and production goals., • Ensure melting temperature profile is maintained in the furnace and forehearth as well as all other important process parameters to ensure high glass quality and high fiber forming efficiencies., • Maintain and troubleshoot system from batch truck and rail unloading, batch mixing, transporting, and charging through the furnace and forehearth., • Maintain proper gas to oxygen ratios in the furnace and forehearth using thermox., • Keeps and inputs all batch formulas. Verifies calibration on batch weighing system., • Profiles and cleans gas/oxy burners and forehearth pencil burners., • Operate, calibrate, and maintain electric boost system., • Opacity reading qualified., • Other tasks as required., • A bachelor’s degree in ceramic, mechanical, or chemical engineering is preferred along with five-years minimum furnace and manufacturing experience., • Green Belt or Black Belt certification preferred. Excellent communication skills, verbal and written., • Ability to provide simple and accurate instructions., • Ability to work at times in a high temperature environment., • Frequent lifting or moving materials up to 10 lbs., • Ability to lift up to 50 lbs., • Regularly required to sit, stand, walk, bend, climb, reach, and grasp., • Ability to climb stairs, ladders and work from heights., • SOME TRAVEL, • I9 VERIFICATION REQUIRED IKO Industries Ltd. is an equal opportunity employer. We are committed to diversity and inclusion and are pleased to consider all qualified applicants for employment without consideration to race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status or disability. IKO Industries Ltd. encourages and welcomes applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. IKO recognizes that its success is due to the strength of its employees. A primary goal of IKO is to promote individual employee's sense of accomplishment and contribution so that employees enjoy their association with IKO. The Company invests in its employees so that they are the most knowledgeable in the industry, and undertakes great efforts to nurture loyalty to, and teamwork at, IKO. We are pleased to offer competitive compensation, health care, a progressive and challenging workplace and a commitment to teamwork and integrity. IKO Industries Ltd. is an equal opportunity employer. We are committed to diversity and inclusion and are pleased to consider all qualified applicants for employment without consideration to race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status or disability. IKO Industries Ltd. encourages and welcomes applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. #J-18808-Ljbffr

Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We’re looking for an Engineer (CE&I). Based at our Capenhurst site, you’ll provide Control, Electrical and Instrumentation (CE&I) engineering support to the Urenco Chemical Process Operations (CPO), delivering safe, compliant and cost-effective engineering solutions. The role supports plant modifications, asset management, reliability improvements and capital projects throughout the full project lifecycle. The CE&I Engineer acts as an Intelligent Customer for externally delivered engineering services and provides technical support to operations, maintenance and project teams. At Urenco we’re committed to giving you opportunities to be your best. We believe in embracing the passion and potential of our people, and to achieve this we offer market leading training and development experiences. Along with the opportunity to be mentored and coached by some of the smartest minds in the industry. • Ensure engineering activities comply with Nuclear Site Licence requirements, legislation and company procedures., • Promote safety through design and support regulatory inspections and audits., • Ensure plant modifications are justified, assessed and implemented through approved change control arrangements., • Develop CE&I engineering solutions for plant modifications and improvement projects., • Produce and review specifications, calculations, engineering drawings, functional design specifications and technical reports., • Support technical investigations, root cause analysis and engineering assessments., • Support project delivery from concept through commissioning and handover., • Develop scopes of work and technical specifications for contractors and suppliers., • Review and approve contractor designs and engineering deliverables., • Provide technical oversight of installation, testing and commissioning activities., • Support project delivery from concept through commissioning and handover., • Develop scopes of work and technical specifications for contractors and suppliers., • Review and approve contractor designs and engineering deliverables., • Provide technical oversight of installation, testing and commissioning activities., • Degree in relevant discipline-specific Engineering or demonstrable experience., • Associate member of a relevant engineering institute, and actively pursuing chartered status., • Incorporated Engineer (IEng), Chartered Engineer (CEng), or actively working towards registration., • Support project delivery from concept through commissioning and handover., • Develop scopes of work and technical specifications for contractors and suppliers., • Review and approve contractor designs and engineering deliverables., • Provide technical oversight of installation, testing and commissioning activities., • Delivery of design improvements on chemical or nuclear facilities., • Demonstrable project delivery experience., • Broad experience of process technologies and equipment., • Collaborative working in multi-disciplined teams leading to successful project outcomes., • Excellent communication, reporting, presentation, negotiation and customer-facing skills;, • Ability to assess problems, feasibility and develop practical solutions., • Sound knowledge of current health and safety legislation, company safety instructions, procedures and management systems;, • Knowledge of up-to-date industrial practices and appreciation of international standards relating to engineering and design;, • Capable of producing high-quality technical documentation including functional and technical specifications and project documentation;, • Ability to maintain and develop own technical knowledge to ensure the best cost-effective and safe solutions are proposed and implemented;, • Capable of exercising authority in the control of contractors and suppliers., • Experience within Documentum, SAP maintenance module, AutoCAD and Amtech Trimble Pro-design would be beneficial. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As an employee of Urenco you will receive: • Annual leave starting at 25 days, which increases by one day for every two years of service, up to a maximum of 30 days. In addition, you will accrue 13 additional days off to be used flexibly. There’s also a newly added scheme for buying and selling holiday, up to 5 days., • A diverse range of family friendly policies., • A generous bonus scheme., • A defined contribution pension scheme; with up to 16% employer’s contribution., • Single private medical and dental cover., • Flexible benefits package; including life assurance and income protection. In addition, you’ll have an opportunity to purchase additional benefits that suit your lifestyle and take advantage of tax and NI savings., • Education and training; we take pride in helping people learn and develop by supporting, accelerating and directing your learning. As well as the completion of mandatory health and safety courses, training packages will be offered to meet your specific needs. Due to the nature of the industry that Urenco operates in, all personnel regardless of employment status working for Urenco are required to obtain security clearance at the level required for their role. Security clearances are assessed in accordance with regulations and official guidance issued by the relevant competent authorities for national security vetting. In certain circumstances, additional enhanced security clearance considerations apply to roles within Urenco owing to the particular activities that the Urenco Group undertakes in relation to uranium enrichment. Successful candidates will need to satisfy security requirements, and all offers of appointment are made subject to the successful approval of all checks initiated. As a truly global company with a presence in the UK, USA, Germany, and the Netherlands, we know that our individual differences make us stronger. Putting people at the heart of our business, we strive to create an open and inclusive workplace that allows every voice to be heard and diversity to thrive. If you require any reasonable adjustments to the recruitment process, please let our talent acquisition team know. Because together, we are one Urenco. We are enriching the world. And enriching your future #J-18808-Ljbffr

Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We’re looking for an Engineer (CE&I). Based at our Capenhurst site, you’ll provide Control, Electrical and Instrumentation (CE&I) engineering support to the Urenco Chemical Process Operations (CPO), delivering safe, compliant and cost-effective engineering solutions. The role supports plant modifications, asset management, reliability improvements and capital projects throughout the full project lifecycle. The CE&I Engineer acts as an Intelligent Customer for externally delivered engineering services and provides technical support to operations, maintenance and project teams. At Urenco we’re committed to giving you opportunities to be your best. If you feel you meet some, but not all of what we’re looking for, please still apply. We believe in embracing the passion and potential of our people, and to achieve this we offer market leading training and development experiences. Along with the opportunity to be mentored and coached by some of the smartest minds in the industry. • Ensure engineering activities comply with Nuclear Site Licence requirements, legislation and company procedures., • Promote safety through design and support regulatory inspections and audits., • Ensure plant modifications are justified, assessed and implemented through approved change control arrangements., • Develop CE&I engineering solutions for plant modifications and improvement projects., • Produce and review specifications, calculations, engineering drawings, functional design specifications and technical reports., • Support technical investigations, root cause analysis and engineering assessments., • Support project delivery from concept through commissioning and handover., • Develop scopes of work and technical specifications for contractors and suppliers., • Review and approve contractor designs and engineering deliverables., • Provide technical oversight of installation, testing and commissioning activities., • Support project delivery from concept through commissioning and handover., • Develop scopes of work and technical specifications for contractors and suppliers., • Review and approve contractor designs and engineering deliverables., • Provide technical oversight of installation, testing and commissioning activities., • Degree in relevant discipline-specific Engineering or demonstrable experience., • Associate member of a relevant engineering institute, and actively pursuing chartered status., • Incorporated Engineer (IEng), Chartered Engineer (CEng), or actively working towards registration., • Support project delivery from concept through commissioning and handover., • Develop scopes of work and technical specifications for contractors and suppliers., • Review and approve contractor designs and engineering deliverables., • Provide technical oversight of installation, testing and commissioning activities., • Delivery of design improvements on chemical or nuclear facilities., • Demonstrable project delivery experience., • Broad experience of process technologies and equipment., • Collaborative working in multi-disciplined teams leading to successful project outcomes., • Excellent communication, reporting, presentation, negotiation and customer-facing skills;, • Ability to assess problems, feasibility and develop practical solutions., • Sound knowledge of current health and safety legislation, company safety instructions, procedures and management systems;, • Knowledge of up-to-date industrial practices and appreciation of international standards relating to engineering and design;, • Capable of producing high-quality technical documentation including functional and technical specifications and project documentation;, • Ability to maintain and develop own technical knowledge to ensure the best cost-effective and safe solutions are proposed and implemented;, • Capable of exercising authority in the control of contractors and suppliers., • Experience within Documentum, SAP maintenance module, AutoCAD and Amtech Trimble Pro-design would be beneficial. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As an employee of Urenco you will receive: • Annual leave starting at 25 days, which increases by one day for every two years of service, up to a maximum of 30 days. In addition, you will accrue 13 additional days off to be used flexibly. There’s also a newly added scheme for buying and selling holiday, up to 5 days., • A diverse range of family friendly policies., • A generous bonus scheme., • A defined contribution pension scheme; with up to 16% employer’s contribution., • Single private medical and dental cover., • Flexible benefits package; including life assurance and income protection. In addition, you’ll have an opportunity to purchase additional benefits that suit your lifestyle and take advantage of tax and NI savings., • Education and training; we take pride in helping people learn and develop by supporting, accelerating and directing your learning. As well as the completion of mandatory health and safety courses, training packages will be offered to meet your specific needs. Due to the nature of the industry that Urenco operates in, all personnel regardless of employment status working for Urenco are required to obtain security clearance at the level required for their role. Security clearances are assessed in accordance with regulations and official guidance issued by the relevant competent authorities for national security vetting. In certain circumstances, additional enhanced security clearance considerations apply to roles within Urenco owing to the particular activities that the Urenco Group undertakes in relation to uranium enrichment. Successful candidates will need to satisfy security requirements, and all offers of appointment are made subject to the successful approval of all checks initiated. As a truly global company with a presence in the UK, USA, Germany, and the Netherlands, we know that our individual differences make us stronger. Putting people at the heart of our business, we strive to create an open and inclusive workplace that allows every voice to be heard and diversity to thrive. If you require any reasonable adjustments to the recruitment process, please let our talent acquisition team know. Because together, we are one Urenco. We are enriching the world. And enriching your future. #J-18808-Ljbffr

Help us to make a world of difference Urenco is a global leader in the production of low-carbon energy, playing a critical role in delivering secure, reliable nuclear fuel solutions worldwide. We are focused on enabling the sustainable generation of electricity for customers around the world while operating to the highest environmental, social, and regulatory standards. In addition, as part of a strategically important industry, Urenco is now required to support the UK Government in exploring options to re-establish nuclear fuel capabilities to produce reactor fuel for defence purposes. To support this new project, we are seeking an R&D Manager to join our Capenhurst site. In this role, you will work within our Government Services function as a key interface between site teams and Group stakeholders to ensure effective planning, coordination, and delivery across complex programmes. At Urenco, we're committed to helping you be your best. If you feel you meet some, but not all, of what we're looking for, we still encourage you to apply. We believe in embracing the passion and potential of our people and offer market-leading training, development, coaching, and mentoring opportunities from some of the brightest minds in the industry. As an R&D Manager, you will play a leading role in the development of UF6-related technology and knowledge ensuring the safe, compliant, and cost-effective design and operation of facilities. You will be responsible for managing R&D activities and projects, building and leading a specialist team, and supervising dedicated R&D facilities and infrastructure. Acting as a technical authority in your field, you will collaborate with stakeholders and support the delivery of strategic technology development programmes. Act as a subject matter expert for UF6-related technologies, providing technical guidance. Lead technology assessments and evaluate Technology Readiness Levels (TRLs) to support project delivery and strategic decision-making. Identify opportunities to improve plant performance, operational efficiency, and technical capability. Plan, mobilise, and deliver R&D and qualification programmes in line with agreed scope, budgets, schedules, and customer requirements. Conduct technical assessments and provide recommendations to senior stakeholders. Document, communicate, and hand over project outcomes to customers and key stakeholders. Support the development of UF6 technology knowledge and R&D capabilities. Monitor emerging technologies and assess their relevance and application. Provide technical expertise during supplier assessments and audits. Ensure R&D activities are conducted safely and in compliance with regulatory and operational requirements. Lead and develop a small specialist team. Foster a collaborative, innovative, and high-performing working environment. Support the ongoing development of people, processes, and technical capabilities. Master's degree, or equivalent qualification, in Mechanical Engineering. Experience within the heavy process, chemical, or nuclear industries, ideally within a highly regulated environment. Proven experience delivering R&D or qualification programmes, including planning, budgeting, execution, and reporting. Experience leading multidisciplinary teams and managing projects across international organisations. Experience evaluating and selecting technologies to meet technical, commercial, and customer requirements. Track record of developing R&D capabilities, including people, processes, technology, and external partnerships. Strong knowledge of UF6 processing and vacuum technologies. Project and programme management expertise, including planning, scheduling, budgeting, and reporting. Strong commercial awareness and stakeholder management skills. Ability to lead, develop, and motivate high-performing teams. Proficiency in English; German or Dutch language skills would be advantageous. Collaborative and team-oriented approach. Passion for innovation and continuous improvement. Commitment to safety, integrity, and inclusion. Strategic mindset with the ability to balance long-term objectives and operational priorities. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As a valued member of our team, you will receive: • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future #J-18808-Ljbffr

SAP Engineering Planner Help us to make a world of difference Urenco offers a rare expertise in enriching uranium for the civil nuclear industry. In fact, we are the only company with the capability to do this at four sites across the world. As a global leader in the production of low carbon energy, we work at the cutting edge of the transition to a sustainable, net zero world. This transformational vision opens up unique and exciting opportunities to build a dynamic, energising, and rewarding career. And right now, we're looking for a Commissioning Planner - Project Testing & Handover. Based at our Capenhurst site location you'll be responsible for the handover of Major CAPEX Capital Projects at CAPENHURST via One Capenhurst Commissioning procedures COM-T01 & CI-Eng-01-03, ensuring legal compliance for completion and submission of commissioning and ongoing maintenance regimes. What will your day look like? Create and maintain SAP Master Data: Carryout plant walkdown / visits Plant hierarchy FLOC's & Equipment Material Master and BOM's Maintenance Plans in line with discipline engineer requirements Loading of data via singular or multiple line volume via Winshuttle. Able to hold technical conversations at a detailed level to ensure that the Capenhurst Maintenance Instructions and technical library are representative of good engineering practices and understand the underlying principles of the specific vendor recommendations with regard to safety and reliability. Awareness of Safety Cases and when reference is required, plus the ability to recognise when the Capenhurst Change Management Process is required. Liaise with Project Engineers, Maintenance and Procurement to identify spares for critical assets. Develop and load BOM's (Bill of Materials) into SAP, to allow for ordering and replenishment of parts in support of the required Maintenance regime. Create / Maintain / Delete Plans as per Project requirements Raise preventative maintenance requests (PMR's) in line with discipline engineering requirements for detailed information about maintenance plans required, including frequency, to be signed off by relevant parties prior to changes in SAP. Ensure procedure followed for obtaining any new Maintenance Plan numbers. Set Plans live after PMR, and COM-T01 is fully approved. Creating / updating ArcGIS maps and related databases to enable department works information to be attached to maintenance plans for aiding maintenance. Liaising with projects to ensure accuracy of data Identify missing assets previously not loaded, or incorrectly loaded into SAP. Liaise and support Engineering to ensure data is correct and accurately recorded in SAP. Create / modify any maintenance plans / BOM's in SAP as required. Liaise with Group IT on improving asset data, and associated asset data standards within SAP. Write / update procedures as necessary Allocate all Maintenance plans / PMR's Allocate all Winshuttle sheets used to identify new / removed assets Allocate all ArcGIS Maps Allocate all Maintenance Instructions Allocate all Bill of Materials Ensure all Operational and Maintenance manuals are listed and recorded in Documentum. Ensure critical spares are identified What do you need to be great at this role? HNC Engineering (or equivalent) Good working knowledge of SAP Asset Management / Maintenance planning modules Working knowledge of ArcGIS Working knowledge of Winshuttle Understanding of technical data (O&M's, Drawings, P&ID's) Our Promise As a truly global company with a presence in the UK, USA, Germany, and the Netherlands, we know that our individual differences make us stronger. Putting people at the heart of our business, we strive to create an open and inclusive workplace that allows every voice to be heard and diversity to thrive. And we support an array of dedicated initiatives, activities, and employee networks to nurture a positive and inspiring work experience.?? Because together, we are one Urenco. We are enriching the world. And enriching your future. Maintenance Planner / Asset Management Coordinator / Project Commissioning Engineer / Maintenance Data Analyst / Reliability Engineer / Asset Data Coordinator / Engineering Planner / SAP Asset management / CAPEX Project handover TPBN1_UKTJ

£500 per day | Inside IR35 | Predominantly Remote | 6-Month Rolling Contract We're looking for an experienced Network Architect with strong IT/OT connectivity and network security expertise to support a major Factory Edge programme. This is an opportunity to shape the network architecture that connects edge computing platforms into complex manufacturing environments, ensuring secure, resilient and repeatable connectivity across factory sites. The role is predominantly remote, with occasional onsite visits to factories in Merseyside (approximately one day per month). Day rate: £500 per day, Inside IR35 Duration: Initial 6 months, rolling contract with potential for extension Location: Remote, with occasional onsite attendance in Merseyside Working arrangement: Predominantly remote Programme: Client Edge as a Service As Network Architect, you'll take ownership of the network architecture and connectivity patterns required to integrate edge infrastructure into factory IT and OT environments. You'll establish secure, standardised and scalable network designs that can be deployed consistently across multiple manufacturing sites, balancing enterprise networking requirements with the need to protect operational technology and production systems. Working closely with enterprise architecture, cyber security, network operations and factory teams, you'll turn architectural requirements into practical, deployable designs and reusable standards. • Design end-to-end network connectivity for factory edge environments, covering LAN/WAN, SD-WAN, routing, switching, firewalls and secure remote access., • Define network segmentation and security boundaries between enterprise IT, edge infrastructure, OT environments and application zones., • Develop repeatable network architecture blueprints and site integration patterns for deployment across multiple factories., • Establish network resilience requirements, including redundant paths, switching, uplinks and critical dependencies., • Ensure alignment with enterprise security policies, zero-trust principles and IT/OT security requirements., • Create high-level and low-level design guidance, network standards and site-readiness assessments., • Work with local factory teams and global network operations to assess existing environments, resolve technical constraints and agree deployable solutions., • Define network assurance criteria and support architecture governance, service acceptance and operational handover., • Proven experience as a Senior Network Architect or Network Architect within a large, complex enterprise environment., • Strong technical knowledge of enterprise networking, including LAN/WAN, SD-WAN, routing, switching, firewalls and network segmentation., • Experience designing secure, resilient connectivity for virtualised infrastructure, distributed platforms or edge computing environments., • Strong understanding of network security architecture, operational resilience and network assurance., • Experience producing reusable architecture standards, network blueprints, HLDs, LLDs and implementation guidance., • Excellent stakeholder management skills, with the ability to work across architecture, security, operations and site-based engineering teams., • A pragmatic, delivery-focused approach to designing standards that can be implemented consistently across multiple locations., • Previous experience working in manufacturing, industrial environments or factory IT/OT architecture., • Knowledge of industrial network segmentation and security frameworks, including IEC 62443 and relevant NIST guidance., • Experience with edge infrastructure platforms such as Azure Local, Dell NativeEdge or Kubernetes-based environments., • Familiarity with ServiceNow, SIAM and enterprise service transition or operational support models., • Factory Edge Network Blueprint., • Standard IT/OT connectivity and segmentation patterns., • Network resilience and secure remote-management standards., • Factory network-readiness assessment templates., • Network design, onboarding and assurance criteria., • Architecture governance, security alignment and operational handover documentation. You’ll enable factory sites to be assessed and onboarded using repeatable network designs, with clear connectivity requirements, robust segmentation and well-defined resilience standards. Your work will help ensure edge deployments integrate securely into existing factory environments without introducing unmanaged connectivity risks, while supporting consistent operations and sustainable ownership across the wider estate. #J-18808-Ljbffr

Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We are seeking a Technical Safety Specialist (Project Support) to join our Capenhurst site. You will be responsible for implementing and embedding technical safety frameworks across Urenco's project portfolio. Working across nuclear, process, electrical, chemical, machinery, lifting, and stored energy disciplines, you will provide practical guidance that enables projects to implement safety requirements effectively throughout the project lifecycle. You will support project teams from concept design through commissioning and handover, supporting hazard studies, supporting technical safety assessments, and ensuring alignment with Design Authority standards, regulatory requirements, and industry best practice. At Urenco, we're committed to helping you be your best. If you feel you meet some, but not all, of what we're looking for, we still encourage you to apply. We believe in embracing the passion and potential of our people and offer market-leading training, development, coaching, and mentoring opportunities from some of the brightest minds in the industry. • Lead Technical Safety Delivery (Projects), • Support the implementation of technical safety frameworks across major projects and programmes located globally., • Develop practical guidance, procedures, templates, and working documents to support project delivery., • Promote a proactive safety culture and support the achievement of HSE objectives across the project portfolio., • Provide specialist technical safety advice to project teams and stakeholders., • Facilitate and contribute to HAZID, HAZOP, and LOPA studies., • Support functional safety assessments, SIL determination, and safety verification activities., • Undertake or support fire risk assessments, consequence modelling, and risk assessments where required., • Ensure technical safety risks are identified, assessed, and managed effectively throughout project delivery., • Work closely with Design Authority, R&D teams, subject matter experts, and project teams to ensure safety requirements are integrated into designs., • Review technical documentation, engineering assessments, and safety deliverables., • Support commissioning, safety-critical equipment verification, and handover activities., • Ensure compliance with relevant legislation, regulations, and Urenco standards., • Promote lessons learned, best practice, and knowledge sharing across projects., • Support the development of technical safety processes, methodologies, and training requirements., • Contribute to assurance activities, audits, inspections, and performance reviews., • Maintain awareness of industry developments and emerging best practice., • Degree qualified in Engineering, Science, Health & Safety, or a related discipline., • Chartered status or postgraduate qualifications desirable., • Membership of a relevant professional institution desirable., • Experience delivering technical safety (Process Safety ) support within high-hazard or highly regulated environments., • Demonstrable experience in Health, Safety and Environmental management systems., • Experience supporting major engineering, construction, or infrastructure projects., • Experience developing or implementing technical safety improvement initiatives., • Strong understanding of technical safety, hazard identification, and risk management., • Experience supporting HAZID, HAZOP, LOPA, and related safety studies., • Knowledge of relevant HSE legislation, regulatory requirements, and industry best practice., • Strong stakeholder management, communication, and influencing skills., • Results-focused with a commitment to safety excellence., • Strong analytical and problem-solving capability., • Collaborative and customer-focused approach., • Committed to continuous improvement and knowledge sharing. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future #J-18808-Ljbffr

The Digital Strategy Consultant serves as a trusted advisor to enterprise customers, partnering with them to design and execute transformational SEO and GEO strategies that drive measurable business outcomes. This role leads structured discovery, develops multi-quarter strategic roadmaps, and guides customers in building scalable operating models that embed SEO and GEO into their broader digital marketing ecosystem. The Digital Strategy Consultant works cross-functionally with Sales, Customer Success, and Product to ensure strategic alignment, accelerate time-to-value, and support long-term customer growth within the Enterprise segment. Tasks in the role Strategic Advisory, Discovery & Roadmapping: Serve as a strategic advisor to enterprise customers by leading structured discovery engagements to assess SEO and GEO maturity, operating models, workflows, and organizational readiness. Conduct in-depth opportunity analysis and competitive benchmarking, synthesizing complex insights into executive-ready recommendations. Translate findings into phased, multi-quarter SEO and GEO roadmaps aligned to measurable business outcomes, clearly defining priorities, milestones, and success criteria. Governance, Adoption & Operating Model Transformation: Design scalable SEO and GEO governance frameworks and operating models that enable long-term adoption and cross-functional alignment. Establish scalable standards for workflows, accountability, reporting, and cross-functional collaboration across Marketing, Product, Engineering, and Content teams. Guide customers through change initiatives, stakeholder alignment, and rollout sequencing while diagnosing inefficiencies and recommending process optimizations that increase operational efficiency and reduce friction. Executive Facilitation & Program Leadership: Lead structured workshops, prioritization sessions, and executive briefings to define outcomes and align stakeholders throughout the customer lifecycle, ensuring strategic alignment and long-term value realization.. Track performance against milestones and KPIs, proactively identify risks and implementation blockers, and recommend course corrections as business priorities evolve. Lifecycle Strategy & Growth Alignment: Partner closely with Sales, Customer Success Managers, and Product teams to ensure strategic continuity throughout the customer lifecycle. Identify opportunities for expanded engagement and deeper alignment between customer goals and Semrush capabilities. Act as the voice of the customer by surfacing insights, risks, and product enhancement opportunities that support enterprise digital transformation. Internal Strategy & Methodology Contribution: Contribute to the evolution of internal playbooks, consulting frameworks, and delivery methodologies that increase leverage and consistency across Strategic Services. Share patterns, insights, and best practices to continuously elevate enterprise strategy delivery. 8+ years of experience in digital strategy, SEO and GEO consulting, change management, enterprise advisory, or related roles within SaaS or MarTech environments Proven experience leading structured discovery engagements and translating insights into actionable, executive-level strategic roadmaps Demonstrated ability to design scalable operating models, governance frameworks, and cross-functional workflows Experience influencing senior stakeholders and driving strategic alignment at the Director and VP level. Strong expertise in SEO and GEO strategy, competitive analysis, and performance measurement with the ability to clearly connect strategic initiatives to commercial outcomes. Exceptional facilitation, stakeholder-management, and executive communication skills Ability to identify risks early, manage ambiguity, and re-prioritize initiatives in dynamic enterprise environments Experience working cross-functionally with Marketing, Product, Engineering, and Executive stakeholders Comfortable managing multiple strategic engagements simultaneously while maintaining high-quality outcomes Not required, but a plus Experience with enterprise-level SEO and GEO and digital marketing platforms such as Semrush, BrightEdge, Conductor, Botify, SimilarWeb, or others Familiarity with AI-driven search trends, content strategy frameworks, and advanced analytics integrations Background in digital marketing consultancy or professional services environments Semrush is a brand visibility platform, empowering marketers to command their online presence and create measurable impact. We unify SEO authority and AI visibility, so brands are found, cited, and chosen everywhere search happens. That's how Semrush gained the trust of over 28 million users-from scaling startups to Fortune 500 companies. Some highlights of our success: $470M+ Annual Recurring Revenue with AI products surpassing $38M+ Dollar-based net revenue retention of 104%, as of December 31, 2025 Large deals growing 74% YoY Semrush named a Leader in The Forrester Wave : Search Engine Optimization Solutions, Q3 2025 Exceptional demand for the Enterprise platform, with deals with global giants like JP Morgan, LG, Samsung, TikTok, and others Shared ambition makes a bigger impact. That's why at Semrush, progress is a partnership: You push us forward, we push you further-and we all move as one. Are you ready to be part of this journey? About the opportunityThe Sales team is at the forefront of empowering businesses to achieve online visibility and digital marketing success. Through our selling approach and world-class enablement programs, we equip our team with the tools, resources, and training. This is how we keep delivering meaningful results for our customers. Joining the Sales team also means: Fast forward and continuous career growth: the highest rate of promotions within the organization A team spread across 40+ locations around the globe Offline and online bootcamps as part of our onboarding process President's club-an opportunity to celebrate exceptional results and reward top performers in high-class vacation destination Quota attainment has been recognized as higher than market average, according to RepVue Uncapped commissions About your future tasks About Semrush Consulting Services Semrush Consulting Services is a team of digital strategy consultants, technical experts, and engagement managers who partner with enterprise customers to accelerate platform adoption and unlock measurable value across SEO and GEO, content strategy, competitive intelligence, and broader digital marketing ecosystems. We deliver high-impact onboarding, advisory, implementation, and enablement services across the customer lifecycle. Our team works alongside some of the world's most sophisticated marketing organizations to design scalable operating models, optimize workflows, and build sustainable digital growth systems that drive long-term business impact., A little more about the companySemrush is the leading brand visibility platform, empowering marketers to command their online presence and create measurable impact. Built on the industry's most expansive proprietary dataset, Semrush delivers AI-driven insights across GEO, SEO, Agentic Search Optimization, content marketing, paid media, and social strategy. The company was founded in 2008 and is headquartered in Boston, MA with a global presence across North America, Europe and Asia. We've built something people are proud to be part of. And the awards agree: Great Place to Work, DEI Workplace, Diversity Champion Award, International Inclusion Award, Most Women Friendly Employers, Best Place for Working Parents. All thanks to 1700+ employees who build the company every day. About our Diversity, Equity, and Inclusion commitments Semrush is an equal opportunity employer. We are committed to ensure that everyone feels a sense of belonging in the workplace. We do not discriminate based upon race, religion, creed, color, national origin, sex, pregnancy, sexual orientation, gender identity, gender expression, age, ancestry, physical or mental disability, or medical condition including medical characteristics, genetic identity, marital status, military service, or any other classification protected by applicable local, state or federal laws. We don't just lead the market-we are busy creating a world where Semrush is an unfair advantage for every marketer. Join us! The annual Total Cash Compensation range for this position is $131,000 to $190,000. Compensation ranges for the same role in other countries may differ based on local market conditions, compensation philosophy, and regulatory requirements. Compensation ranges for this role outside of the United States may differ and will be determined based on local market benchmarks, compensation practices, and applicable regulations. • Strong product-market fit recognized by RepVue, • High earning potential with clear quota attainment visibility, • Life insurance, • Low cost medical, dental, and vision plans, • Accidental death and dismemberment (AD&D) insurance, • Dependent Care Savings Accounts and Flexible Spending Accounts, • Health Savings Account, • Short-term and long-term Disability, • Employee Assistance Program, • Employee Resource Groups, • Paid parental leave, • Relief Fund, • Travel coverage #J-18808-Ljbffr

Urenco is a global leader in the production of low-carbon energy, playing a critical role in delivering secure, reliable nuclear fuel solutions worldwide. We are focused on enabling the sustainable generation of electricity for customers around the world while operating to the highest environmental, social, and regulatory standards. In addition, as part of a strategically important industry, Urenco is now required to support the UK Government in exploring options to re-establish nuclear fuel capabilities to produce reactor fuel for defence purposes. To support this new project, we are seeking an R&D Manager to join our Capenhurst site. In this role, you will work within our Government Services function as a key interface between site teams and Group stakeholders to ensure effective planning, coordination, and delivery across complex programmes. At Urenco, we’re committed to helping you be your best. If you feel you meet some, but not all, of what we’re looking for, we still encourage you to apply. We believe in embracing the passion and potential of our people and offer market-leading training, development, coaching, and mentoring opportunities from some of the brightest minds in the industry. As an R&D Manager, you will play a leading role in the development of UF6-related technology and knowledge ensuring the safe, compliant, and cost-effective design and operation of facilities. You will be responsible for managing R&D activities and projects, building and leading a specialist team, and supervising dedicated R&D facilities and infrastructure. Acting as a technical authority in your field, you will collaborate with stakeholders and support the delivery of strategic technology development programmes. • Act as a subject matter expert for UF6-related technologies, providing technical guidance., • Lead technology assessments and evaluate Technology Readiness Levels (TRLs) to support project delivery and strategic decision-making., • Identify opportunities to improve plant performance, operational efficiency, and technical capability., • Plan, mobilise, and deliver R&D and qualification programmes in line with agreed scope, budgets, schedules, and customer requirements., • Conduct technical assessments and provide recommendations to senior stakeholders., • Document, communicate, and hand over project outcomes to customers and key stakeholders., • Support the development of UF6 technology knowledge and R&D capabilities., • Monitor emerging technologies and assess their relevance and application., • Provide technical expertise during supplier assessments and audits., • Ensure R&D activities are conducted safely and in compliance with regulatory and operational requirements., • Lead and develop a small specialist team., • Foster a collaborative, innovative, and high-performing working environment., • Support the ongoing development of people, processes, and technical capabilities., • Master’s degree, or equivalent qualification, in Mechanical Engineering., • Experience within the heavy process, chemical, or nuclear industries, ideally within a highly regulated environment., • Proven experience delivering R&D or qualification programmes, including planning, budgeting, execution, and reporting., • Experience leading multidisciplinary teams and managing projects across international organisations., • Experience evaluating and selecting technologies to meet technical, commercial, and customer requirements., • Track record of developing R&D capabilities, including people, processes, technology, and external partnerships., • Strong knowledge of UF6 processing and vacuum technologies., • Project and programme management expertise, including planning, scheduling, budgeting, and reporting., • Strong commercial awareness and stakeholder management skills., • Ability to lead, develop, and motivate high-performing teams., • Proficiency in English; German or Dutch language skills would be advantageous., • Collaborative and team-oriented approach., • Passion for innovation and continuous improvement., • Commitment to safety, integrity, and inclusion., • Strategic mindset with the ability to balance long-term objectives and operational priorities. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As a valued member of our team, you will receive: • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. #J-18808-Ljbffr

Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We are seeking a Contracts Delivery Manager to join our team at our Capenhurst site. You will lead a Contract Management team supporting a portfolio of projects, major programmes, or expansion activities. You will be responsible for the development of contract management strategies, resource planning, and the delivery of high-quality contract management support across the project lifecycle. Working closely with project teams, business stakeholders, and suppliers, you will ensure contractual requirements are aligned with project delivery objectives while protecting Urenco's commercial position and supporting successful project outcomes. At Urenco, we're committed to helping you be your best. If you feel you meet some, but not all, of what we're looking for, we still encourage you to apply. We believe in embracing the passion and potential of our people and offer market-leading training, development, coaching, and mentoring opportunities from some of the brightest minds in the industry. • Lead and develop a team of contract management professionals supporting project and programme delivery., • Develop contract management strategies and implementation plans aligned with business and project objectives., • Ensure effective deployment and utilisation of contract management resources across the portfolio., • Support project teams in the development and delivery of contracting strategies., • Ensure contractual requirements are effectively incorporated into project delivery plans., • Manage supplier and contractual relationships to support project performance and minimise commercial risk., • Protect Urenco's commercial position through effective contract management and governance., • Lead portfolio-level reporting and forward resource planning activities., • Monitor project and supply chain performance, identifying issues and supporting corrective actions., • Implement performance metrics and reporting processes that support informed decision-making., • Support continuous improvement through lessons learned and knowledge sharing., • Promote consistent application of contract management standards, policies, and procedures., • Foster a proactive safety culture throughout the project lifecycle., • Degree qualified in a relevant discipline, such as Quantity Surveying, Law, Engineering, or equivalent experience., • Professional accreditation in Contract Management, Procurement, or Project Management (e.g. RICS, CIPS, APM, NEC or equivalent) desirable., • Experience in Commercial, Procurement, or Contract Management roles., • Experience supporting major projects and programmes across sectors such as construction, energy, or nuclear., • Demonstrable experience across the full project lifecycle, from concept development through to project handover., • Strong understanding of contract management, commercial strategy, and supplier management., • Ability to develop contract strategies and manage contractual risk., • Strong leadership, negotiation, stakeholder management, and communication skills., • Commercially aware and results-focused., • Collaborative and customer-focused approach., • Confident decision-maker with a commitment to continuous improvement. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As a valued member of our team, you will receive: • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future #J-18808-Ljbffr

About The Role Right across infrastructure, there's a requirement to not only maintain, but also renew and reimagine. Whatever stage you're at in your career, with us you'll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. We are looking for Design Managers. Where will you be working? At M Group Water, we're at the forefront of delivering innovative design and build sustainable solutions within the water sector across the UK. With a growing portfolio of high-profile water contracts for AMP 8 & beyond, we're committed to driving technical excellence, sustainability, and cutting-edge engineering to transform the way water services are delivered to our stakeholders and the communities. These roles will be based across the South of the UK. Want to be a part of it? We're seeking passionate and talented design and engineering professionals whatever your level to join us across the UK. Whether you're an experienced expert or an ambitious newcomer, this is your chance to work on impactful projects that make a real difference to communities and the environment. Why designing with us is different: • Be part of a collaborative, forward-thinking team where your ideas matter., • Work on diverse, challenging projects that showcase your skills and creativity., • Benefit from continuous learning and development opportunities within a supportive environment., • Play a key role in shaping sustainable water solutions for the future. If you want to design with purpose, innovate with impact, and see the tangible results of your work, M Group Water is where your career will thrive together. Help us develop and deliver essential water and wastewater infrastructure using your engineering expertise! As a Design Manager, you'll be leading and managing the design and technical delivery of clean and wastewater infrastructure projects, ensuring that solutions are safe, compliant, cost-effective, and meet client and operational requirements. The role oversees multidisciplinary design teams, coordinates internal and external stakeholders, and manages the full design lifecycle from concept through to construction and handover. You'll work closely with the framework manager to ensure the capability and capacity of design staff is available on the specific contract. Key Responsibilities: • Managing a design team across multiple disciplines., • Managing the development and delivery of clean and waste water projects, including pumping stations, clean and waste water networks, and associated infrastructure., • Ensuring designs comply with industry standards, regulatory requirements, health and safety obligations, and client specifications., • Planning and monitoring design programmes, resources, budgets, risks, and change control processes., • Acting as the primary technical interface between clients, operational teams, contractors, and external stakeholders., • Driving innovation, sustainability, and low-carbon solutions within project designs., • Reviewing and approving technical outputs while maintaining quality assurance and design governance., • Supporting and mentoring engineers and designers to develop technical capability within the team., • Managing design approvals and handover processes to ensure successful project delivery.What's in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; • Contributory pension scheme, • Online GP service, 24 hours a day, 365 days a year, • Employee assistance programme, • My Rewards portal, access to 1000's of retail discounts, • Life assurance, • Cycle to work, salary finance and give as you earn schemes, • Enhanced maternity, paternity leave and adoption leave, • Reward and recognition scheme, • Recommend a friend – get rewarded for introducing people to us!In addition, this role offers;, • Company car and fuel card with a range of EV and hybrid vehicles to choose from, • My Car Choice our salary sacrifice EV/ Hybrid car scheme, • Private health care – single cover, • Health Care Cash Plan, giving you the ability to claim back medical expenses for things like dental, eyecare and physiotherapy and much more!, • 25 days annual leave plus bank holidays, • Discretionary bonus schemeAbout us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We're one of the Top 100 UK companies actively supporting and recruiting veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. • We're responsible and go further for our people, clients, communities and the planet, • We're open and seek new and better ways of exceeding expectations, • We're together and as one team; the whole is greater than the sum of the parts, • We're ambitious and embrace opportunity, to lead essential infrastructure services for lifeWhether you're a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. It's an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupW JBRP1_UKTJ

Are you an experienced Electrical Design Engineer looking to work on technically complex and high-impact projects? Join our talented Design Team and play a key role in delivering innovative engineering solutions across sectors such as nuclear and pharmaceutical. This is a site based role at Urenco Capenhurst, where you’ll collaborate with multidisciplinary and high performing teams. If you’re passionate about electrical engineering, sustainability, and digital innovation, we’d love to hear from you. Who We’re Looking For: • Experience in a design environment (site construction), • IT literate, with proficiency in: Trimble ProDesign/Amtech (preferred), Relux/DiaLux, AutoCAD 2D, Revit, Navisworks (preferred), and Microsoft Office, • Working knowledge of BS5839 (Fire Alarm Systems) and BS5266 (Emergency Lighting), • Basic understanding of HV equipment , transformers , and LV switchgear assemblies, • Capable of producing cable calculations, SLDs, block and GA drawings, specifications, datasheets, registers, cable schedules, BoMs, and containment sizing, • CompEx Ex12 certification and knowledge of ATEX/DSEAR regulations (preferred) What’s on Offer Our people are our greatest asset. We’re committed to recruiting, training, and developing people, who can drive innovation and help shape the future of energy. We invest in nurturing talent, offer a competitive base salary and a comprehensive benefits package, and support continuous professional development at every level of the organisation. • Medical Health Cover & Life Assurance, • 25 days of annual leave, plus 1 additional day for your birthday, • Pension Scheme, • Car Allowance, • Family Friendly policies (Enhanced maternity & paternity), • Refer a friend bonus scheme, • My Perks (after probation) interest free tech loans, • Real career progression opportunities., • Discretionary annual salary reviews, • Successful candidate Must be willing and eligible to obtain SC security clearance (costs covered by the company) What you’ll be doing • Provide technical support to the contracting, commissioning, and facilities services functions, offering practical solutions, troubleshooting assistance, and expert engineering advice., • Review projects to ensure compliance, completeness, and quality standards are met; prepare detailed reports outlining key findings and recommendations., • Attend client and consultant meetings, present review outcomes effectively, and maintain strong, positive relationships with clients, consultants, and project stakeholders., • Mentor and support junior team members, fostering professional growth and learning within a safe and collaborative environment., • Apply engineering expertise to review and cross reference project specifications, drawings, and schedules, identifying discrepancies and assessing technical risks. Diversity and Inclusion At Dalkia, we believe that a diverse and inclusive workforce is essential to driving innovation and achieving a sustainable energy future. We are committed to creating a workplace where everyone feels valued, respected, and empowered to thrive regardless of background, identity, or lived experience. We welcome applications from all individuals and are proud to be an equal opportunity employer. Together, we’re building a culture that reflects the communities we serve and supports the transition to a net-zero world. About us Dalkia is a leading technical and energy services company in the UK. We are committed to building quality relationships to drive long term value for our clients. Backed by EDF, Britain’s biggest generator of low carbon electricity, we leverage the strength of our Group, without losing the personability of a smaller business. We’re a people-first culture. Guided by our value-added approach and bolstered by the latest technologies, tools and engineering techniques, our expert team will support you throughout the project lifecycle, from design to commissioning, completion and aftercare, ensuring complete satisfaction.

Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We are seeking a Senior Electrical Engineer to join our team at the Capenhurst site. In this role you are a member of a design team that delivers Front End Engineering Design (FEED) to multiple customers within Urenco. This includes technical feasibility studies and best available technology (BAT) studies. As the lead engineer for electrical expertise, you will play a key role in delivering conceptual and basic designs for new builds or modifications of production facilities. You will provide expert knowledge and advice management from a technical seniority perspective on plant design requirement specifications. Additionally, you will provide guidance and oversight on design development to third-party engineering service providers, ensuring high standards and alignment with project goals. At Urenco we’re committed to giving you opportunities to be your best. If you feel you meet some, but not all of what we're looking for, please still apply. We believe in embracing the passion and potential of our people, and to achieve this we offer market leading training and development experiences. Along with the opportunity to be mentored and coached by some of the smartest minds in the industry. • Actively foster a pro-active safety culture within the organisation., • Conduct thorough analysis to drive a "learning from experience" behaviour across teams., • Ensure that advanced plant designs incorporate safety features in line with industry best practices and lessons learned from the (nuclear) business., • Oversee electrical design engineering aspects of centrifuge drive systems, electrical power generation and power distribution rating from site HV to plant LV, providing options and evaluations for feasibility, optioneering, and best available technology studies., • Deliver conceptual designs and design specifications with a focus on electrical engineering expertise., • Produce basic design packages concerning Core Plant Technology (CPT) related to electrical systems and equipment., • Define and maintain CPT design standards, following Urenco’s safety best practices and state-of-the-art technology within the Design Engineering Excellence Centre., • Provide direction and oversight regarding detailed designs and supplier manufacturing quality processes, upon request from site or group project managers., • Establish, control, and maintain Group Reference Design and safety case standards, including core enrichment systems, electrical support systems, and de-conversion process requirements., • Ensure all design and safety case requirements support UTD (Urenco Technology Development) activities., • Lead post-implementation reviews within the electrical expertise area to establish a feedback loop for the Design Authority, ensuring compliance with safety licences, operational standards, and asset management practices., • Educational Background - Bachelor’s or Master’s degree in Electrical Engineering, Power Systems Engineering or Advanced Technology, or equivalent relevant experience., • Expertise and Specialisation - Recognised specialist in your field, with a high level of in-depth knowledge and proven problem‑solving capabilities., • Experience in Quality Management - Solid experience working with quality management systems to ensure high standards in design and production processes., • Track Record in Design Delivery - Demonstrable success in delivering conceptual and basic designs for complex process facilities, with a strong focus on achieving effective and innovative outcomes., • Senior-Level Experience - Extensive experience in plant design, particularly in managing and guiding the development of advanced designs and solutions., • International Collaboration - Willingness and ability to travel internationally to Urenco sites on a regular basis (typically monthly) to support project delivery, collaboration, and the sharing of engineering best practice. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As a valued member of our team, you will receive: • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work‑life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future. #J-18808-Ljbffr

Requisition ID3869-Posted30/09/2026-UK Delivery-HSSE & Planning-Stanlow - EOUK-Project Management Organisation Location: Stanlow Manufacturing Complex, Ellesmere Port Employment Type: Site Based Full Time Role 5 days per week Monday-Friday • 25 days holiday, increasing with service, • Private medical insurance, • Additional flex benefits, including holiday purchase, • Access to Employee Assistance Programme with exclusive access to a range of Discounts, • Free secure on-site car parking About the Company EET (Essar Energy Transition) vision is to be the leading producer of low carbon fuels and establish a blueprint energy transition hub in the North West. EET plays a major role in supplying the Northwest and the wider UK with essential fuels. We produce over 16% of the UK’s road transport fuels, supply key feedstocks to the petrochemical industry, and are investing heavily in low‑carbon energy solutions. We work with major retail fuel brands, supermarkets, Manchester Airport, leading airlines, and regional transport operators. We are also a key partner in the HyNet project, helping to deliver the region’s low‑carbon future. With over 900 skilled colleagues, we offer a strong safety culture, technically challenging work, and some of the best training in the energy sector. As a Senior Environmental Specialist, you will play a key role in supporting the delivery of EET's multi-billion-pound infrastructure and energy transition project portfolio. Reporting to the Environmental Lead, you will provide expert environmental guidance across major development projects, ensuring environmental considerations are fully integrated throughout the project lifecycle. Working closely with project teams, consultants, regulators and external stakeholders, you will help secure approvals,maintain compliance and deliver environmental solutions that support the successful execution of strategic CAPEX projects. You will: • Support and deputise for the Environmental Lead across a portfolio of major infrastructure and development projects., • Lead environmental deliverables associated with planning applications, Environmental Impact Assessments (EIA), environmental permitting and wider regulatory requirements., • Manage specialist environmental consultants and contractor support contracts, ensuring high-quality, cost-effective delivery of services., • Coordinate environmental activities throughout the project lifecycle, working closely with Project Managers and multidisciplinary teams., • Build and maintain effective relationships with regulators, local authorities, community stakeholders and external advisors., • Provide technical expertise on environmental legislation, permitting requirements and planning compliance obligations., • Support the discharge of planning conditions, project environmental requirements and regulatory commitments., • Produce, review and assure technical reports and environmental documentation for internal and external stakeholders., • Monitor regulatory developments and industry best practice to ensure ongoing compliance and continuous improvement., • Contribute to environmental performance monitoring, audit activities and departmental KPI reporting., • Promote EET's commitment to environmental stewardship, compliance and operational excellence. About You To succeed in this role, you'll have: • A degree in Environmental Engineering, Environmental Science or a related discipline., • Chartered membership of a relevant professional institution (such as ISEP or CIEEM), or a clear plan to achieve chartered status within 18 months., • Significant experience supporting major infrastructure, industrial, energy or engineering projects within a complex regulatory environment., • Strong knowledge of UK environmental legislation, environmental permitting and planning frameworks., • Experience delivering Environmental Impact Assessments (EIA), permitting applications and other planning and environmental compliance activities., • Demonstrable project management skills, with experience delivering technical workstreams on time and within budget., • Excellent stakeholder management skills and the ability to engage effectively with regulators, consultants, project teams and senior leadership., • Strong analytical and problem-solving abilities, with the confidence to interpret and apply complex environmental regulations., • Excellent written and verbal communication skills, including technical report writing and presentation experience., • The ability to manage multiple priorities while maintaining a high level of accuracy and attention to detail., • A proactive, collaborative approach and a passion for environmental compliance and continuous improvement. It would be advantageous if you also have: • A master’s degree in an environmental or related discipline., • Experience with ISO 14001 environmental management systems and environmental auditing., • Knowledge of UK ETS, ESOS, CL: AIRE and other environmental compliance frameworks., • Experience in specialist areas such as air dispersion modelling, effluent monitoring, waste management or ENVID studies. #J-18808-Ljbffr

Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We are seeking a Technical Safety Specialist (Project Support) to join our Capenhurst site. You will be responsible for implementing and embedding technical safety frameworks across Urenco’s project portfolio. Working across nuclear, process, electrical, chemical, machinery, lifting, and stored energy disciplines, you will provide practical guidance that enables projects to implement safety requirements effectively throughout the project lifecycle. You will support project teams from concept design through commissioning and handover, supporting hazard studies, supporting technical safety assessments, and ensuring alignment with Design Authority standards, regulatory requirements, and industry best practice. At Urenco, we’re committed to helping you be your best. If you feel you meet some, but not all, of what we’re looking for, we still encourage you to apply. We believe in embracing the passion and potential of our people and offer market-leading training, development, coaching, and mentoring opportunities from some of the brightest minds in the industry. • Support the implementation of technical safety frameworks across major projects and programmes located globally., • Develop practical guidance, procedures, templates, and working documents to support project delivery., • Promote a proactive safety culture and support the achievement of HSE objectives across the project portfolio., • Provide specialist technical safety advice to project teams and stakeholders., • Facilitate and contribute to HAZID, HAZOP, and LOPA studies., • Support functional safety assessments, SIL determination, and safety verification activities., • Undertake or support fire risk assessments, consequence modelling, and risk assessments where required., • Ensure technical safety risks are identified, assessed, and managed effectively throughout project delivery., • Work closely with Design Authority, R&D teams, subject matter experts, and project teams to ensure safety requirements are integrated into designs., • Review technical documentation, engineering assessments, and safety deliverables., • Support commissioning, safety-critical equipment verification, and handover activities., • Ensure compliance with relevant legislation, regulations, and Urenco standards., • Promote lessons learned, best practice, and knowledge sharing across projects., • Support the development of technical safety processes, methodologies, and training requirements., • Contribute to assurance activities, audits, inspections, and performance reviews., • Maintain awareness of industry developments and emerging best practice., • Degree qualified in Engineering, Science, Health & Safety, or a related discipline., • Chartered status or postgraduate qualifications desirable., • Membership of a relevant professional institution desirable., • Experience delivering technical safety (Process Safety ) support within high-hazard or highly regulated environments., • Demonstrable experience in Health, Safety and Environmental management systems., • Experience supporting major engineering, construction, or infrastructure projects., • Experience developing or implementing technical safety improvement initiatives., • Strong understanding of technical safety, hazard identification, and risk management., • Experience supporting HAZID, HAZOP, LOPA, and related safety studies., • Knowledge of relevant HSE legislation, regulatory requirements, and industry best practice., • Strong stakeholder management, communication, and influencing skills., • Results-focused with a commitment to safety excellence., • Strong analytical and problem-solving capability., • Collaborative and customer-focused approach., • Committed to continuous improvement and knowledge sharing. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As a valued member of our team, you will receive: • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future. #J-18808-Ljbffr

General Assistant / Cleaner - Netherfield.Help Create an Exceptional Fitness Environment.At Everlast Gyms, we're committed to delivering outstanding fitness experiences for our members.Our clubs are built on high-quality facilities, exceptional service and an environment where people can train with

Part-Time / Seasonal - working Mondays and Fridays.Join our One Great Team here at Haven as an Accommodation Cleaner, where you'll help create spotless, welcoming spaces for our guests to enjoy their next adventure!.We're looking for reliable, detail-focused team members to take care of our accommod

Holiday allowance up to 32 days relating to length of service, plus holiday purchase scheme, subject to meeting minimum criteria.

Processing returns and carrying out basic product checks Maintaining accurate stock locations and keeping work areas organised Supporting colleagues to ensure orders are completed on time Following safe manual handling and health and safety procedures This Warehouse Operative / Driver opportunity

The role involves maintaining a clean, safe and presentable environment while following site cleaning and safety procedures. Following site-specific health, safety and security procedures. Able to work independently and follow site procedures.

Direct Cleaning Services, We are looking to recruit a suitable operative to work 2.The position is term time with 2 weeks deep cleaning in the summer.The duties will be daily cleaning of a school.We would prefer applicants who are able to commute.If you would like to apply for this position, please

The role focuses on maintaining a clean, safe environment and following site cleaning procedures.

Jobstore are recruiting for Cleaning Operatives to be based on one of our client's sites in or around Derby.We have work available, working 15.Monday to Friday as several locations across the Derby postcode.A current Enhanced DBS certificate is essentail for this position.We are looking for reliable

Recruit4staff are representing a leading food manufacturing and packaging business in their search for a Warehouse FLT Operative to work in Oswestry Job Details: Pay: £34,401 starting salary, rising to £38,631 once signed off as competent in the role Hours of Work: 3 on, 3 off, working 12-hour

Job Description We're currently recruiting a full time Cleaner to join our cleaning and facilities teams for Defence, contracted to 35 hours per week.As one of our dedicated Cleaners, you will help to deliver on our promise to always create the best and brightest experiences for our clients and cus

Cleaner Job In Haringey| Full-Time or Part-Time | Immediate Start We have full-time and part-time cleaning jobs available in your area.Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly.Just click 'apply' and complete our onlin

All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description.

If you are passionate about cleanliness and enjoy working in a dynamic school setting, this position is perfect for you! 10 hours per week Monday-Friday 16:30pm-18:30pm TERM TIME ONLY Duties Perform commercial cleaning tasks across school premises, including classrooms, hallways, toilets, and commun

Do you have the following skills, experience and drive to succeed in this role Find out below. Safely stack and unstack pallets, crates, and containers following established safety procedures. Good level of English Proven experience operating MHE trucks in a warehouse or distribution centre environm

Competitive Salary with extensive benefits : Product allowance – alcoholic & non alcoholic choices Company bonus scheme Life Assurance Access to 24/7 GP services Company pension contribution Generous holiday Access to a range of high street discounts Carlsberg Britvic is the largest multi-beverage

Key Responsibilities Deliver professional cleaning services to a high standard Travel between assigned sites within your designated area Follow company cleaning procedures and health & safety requirements Use cleaning equipment and materials safely and effectively Maintain positive relationships wit

Make sure to apply quickly in order to maximise your chances of being considered for an interview Read the complete job description below. Following health and safety procedures at all times.

If you have warehouse experience and hold LLOP or PPT experience/certification , we want to hear from you! The Role: Loading and unloading vehicles General warehouse duties Moving stock safely around the warehouse Working as part of a busy team Following health & safety procedures Hours: Monday to F

We currently have several positions available, offering the chance to join a supportive team where your contribution is valued, with the following working hours: 5 days per week, 36 weeks per year plus an additional 105 annual clean down hours. You may have experience in the following: Cleaner, Scho

The Role As a Warehouse Operative, your duties may include: Picking customer orders accurately using scanners, pick sheets or warehouse systems Packing and preparing goods ready for dispatch Loading and unloading vehicles safely Receiving, checking and booking in deliveries Putting stock away into t

Shifts | Chiller department |30-35 days holiday (pro rata) | 10% in-store discount | Pension scheme Everyone who works at Lidl brings something unique to the table - but we also have a whole lot in common.As a Lidl Warehouse Operative (Chiller), you’ll make sure our stores receive the right stock

WAREHOUSE OPERATIVE * SHEFFIELD * S20 * DAYS * IMMEDIATE STARTS *.Due to increase in workloads our prestigious independent client are now looking for Warehouse Operatives to join their family orientated team!!.The role of a Warehouse Operative is varied and duties will include.This is a NO

Shifts | Chiller Department | 30-35 days holiday (pro rata) | 10% in-store discount | Pension scheme.Everyone who works at Lidl brings something unique to the table - but we also have a whole lot in common.We’re hard-working, focused and reliable.As a Lidl Warehouse Operative (Chiller), you’ll m

DutiesPicking items accurately from warehouse locationsPacking products ready for dispatchPutting stock away in the correct locationsChecking items for defects or damageReporting any damaged or defective itemsKeeping the warehouse clean, organised and safeFollowing health & safety procedures at all

Picker Packer AM shift - Kettering.At Job&Talent, we are recruiting for a Picker Packer AM shift to work with a leading logistics provider in Kettering.This role is essential for maintaining efficient operations within a fast-paced distribution environment, ensuring that customer orders are processe

Full-time Warehouse Operative role in Doncaster, involving loading plastic food trays onto a conveyor belt and operating a baling machine.Requires physical work and availability to work weekends.

WAREHOUSE OPERATIVE * MANVERS * S63 * WEEKENDS ONLY * IMMEDIATE STARTS *.Due to increase in workloads our prestigious independent client are now looking for Warehouse Operatives to join their family orientated team!!.The role of a Warehouse Operative is varied and duties will include.This