No experience design jobs in WatfordCreate job alerts

Start your Construction career with Thames WaterKick-start your future as a Construction Assurance Apprentice, supporting the UK’s largest water and wastewater provider. You’ll support projects through design, build, commissioning, and aftercare—helping integrate new assets smoothly into day-to-day operations. What you’ll do as a Construction Assurance Apprentice Level 4 Apprentice • Support construction assurance to meet time, cost, and quality targets., • Assist with pre-construction reviews and readiness checks., • Monitor contractor safety, environmental compliance, and asset standards., • Help resolve site issues, non-conformances, and deviations., • Work with Operations Readiness teams to ensure smooth asset integration., • Help prepare and review RAMS, TWOSAS, and permits., • Take part in audits and performance reviews, driving improvement., • Support planning, lookahead meetings, commissioning, and aftercare. Where you will work: Location: Maple Lodge, Rickmansworth, WD3 9SQHours: 36 hours a week across four working days plus one off-the-job training day, Start date: September 2026 Training and qualification: You’ll study with University of Built Environment, one of the UK’s leading training providers. Your training includes virtual sessions each week, as well as live seminars and recordings; tasks and learning resources are set on the VLE. Qualification: Level 4 Construction Site Supervisor Standard- Certificate of Higher Education Construction & Built Environment Duration: Permanent contract with a 42-month structured programme What you should bring to the role:, • GCSE Maths and English (grade 9-4 / A-C), • 64 UCAS tariff points or equivalent, • A full UK driver's licence is required as you'll be travelling across Thames Water sites. If you use your own vehicle for travel, you'll need to have business insurance, • Strong time management and organisation skills, • Is passionate about learning and aligned with Thames Water’s goals for the future What’s in it for you?, • Starting salary of £22,500 per annum, • Annual Leave: 24 days holiday per year, increasing to 28 with the length of service (plus bank holidays), • Performance-related pay plan directly linked to company performance measures and targets, • Generous Pension Scheme through AON, • Access to lots of benefits to help you take care of you and your family’s health and wellbeing, and your finances – from annual health MOTs and access to physiotherapy and counselling, to Cycle to Work schemes, shopping vouchers and life assurance. Find out more about our benefits and perks (Please note different T&Cs apply if on secondment)Who are we?We’re the UK’s largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It’s a big job and we’ve got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to come.Learn more about our purpose and valuesWorking at Thames WaterThames Water is a unique, rewarding, and diverse place to work, where every day you can make a difference, yet no day is the same. As part of our family, you’ll enjoy meaningful career opportunities, flexible working arrangements and excellent benefits.If you’re looking for a sustainable and successful career where you can make a daily difference to millions of people’s lives while helping to protect the world of water for future generations, we’ll be here to support you every step of the way. Together, we can build a better future for our customers, our region, and our planet.Real purpose, real support, real opportunities. Come and join the Thames Water family. Why choose us? Learn more.We’re committed to being a great, diverse, and inclusive place to work. We welcome applications from everyone and want to ensure you feel supported throughout the recruitment process. If you need any adjustments, whether that’s extra time, accessible formats, or anything else just let us know, we’re here to help and support.When a crisis happens, we all rally around to support our customers. As part of Team Thames, you’ll have the opportunity to sign up to support our customers on the frontline as an ambassador. Full training will be given for what is undoubtedly an incredibly rewarding experience. It’s also a great opportunity to learn more about our business and meet colleagues.Disclaimer: due to the high volume of applications we receive, we may close the advert earlier than the advertised date, so we encourage you to apply as soon as possible to avoid disappointment.

CNC Manufacturing Engineer Ruislip Up to £55,000 Are you looking for a role that gives you the freedom to make a real impact and fully utilise your technical expertise? A long‑standing, industry‑secure engineering business is seeking an experienced and enthusiastic Production Engineer to join their team in Ruislip. This is an exciting opportunity to be part of a well‑established operation where you’ll help drive innovation, improve manufacturing capability, and play a key part in expanding the company’s customer base. About the Role As a Production Engineer, you’ll be responsible for programming, setting, and operating advanced 3–5 axis CNC machining centres. You’ll create machining strategies from both CAD models and from scratch when required, while producing high‑precision components to tight tolerances. This is a hands‑on role within a skilled and collaborative team where your experience and ideas will be highly valued. Candidate Requirements • Apprentice trained or relevant engineering qualification, • Minimum 5 years’ experience as a 5 Axis CNC Miller/Programmer, • Knowledge of Heidenhain and Fanuc controls, • Proficient with SolidWorks and Fusion 360, • Ability to create programs from scratch, including when no CAD model is provided, • Experience with fixture and jig design/manufacture Key Responsibilities • Programming, setting, and operating 3–5 axis CNC machining centres, • Creating machining strategies with or without CAD models, • Developing full toolpaths using SolidWorks and Fusion 360, • Working confidently with Heidenhain and Fanuc controls, • Designing and manufacturing fixtures, jigs, and work holding solutions, • Producing high‑precision components to tight tolerances, • Reading engineering drawings/3D models and converting them into efficient machining processes, • Continuously improving machining methods to maximise productivity and quality Shift pattern Monday- Friday 08:00- 17:00

A leading UK fitted furniture company is seeking sales professionals to join its team\n\nThe Role\n\n * \n\n Attend company-booked, in-home appointments (no cold calling)\n\n * \n\n Carry out site surveys and customer consultations\n\n * \n\n Design and sell bespoke fitted furniture solutions\n\n * \n\n Use CAD-based software to create room designs\n\n * \n\n Deliver excellent customer service\n\nFull training is provided; previous sales or customer-facing experience is beneficial.\n\nWhat’s on Offer\n\n * \n\n High volume of inbound, company-booked appointments\n\n * \n\n Excellent earning potential (£50,000–£100,000 OTE)\n\n * \n\n Weekly paid commission\n\n * \n\n Flexible full-time working\n\n * \n\n Full sample kit provided\n\nRequirements\n\n * \n\n Strong communication skills and a positive attitude\n\n * \n\n Valid UK driving licence and own reliable vehicle (business insured)\n\n * \n\n Own telephone and laptop\n\n * \n\n Flexibility to work evenings and weekends\n\n * \n\n Comfortable working self-employed, commission-only\n\nWork Location: In person

Senior Electrical Design Engineer Ready to make your application Please do read through the description at least once before clicking on Apply. Location: Hemel Hempstead (with project exposure across the UK) An established, design-led building services consultancy is looking to appoint a Senior Electrical Design Engineer to support the growth of their MEP team in Hemel Hempstead. This is an excellent opportunity to join a close-knit, collaborative practice known for delivering high-end residential and technically challenging projects across the UK and internationally. The business has built a strong reputation for its hands-on, director-led approach and its ability to deliver intelligent, discreet engineering solutions. You'll be joining a team where quality is prioritised over volume, and engineers are given genuine responsibility, autonomy, and direct access to senior leadership. The Role As a Senior Electrical Design Engineer, you'll take a leading role in the design and delivery of electrical building services systems across a portfolio of bespoke and design-focused projects. Key responsibilities include: • Producing detailed electrical designs including calculations, specifications, and drawings, • Designing systems such as power, lighting, containment, and life safety systems, • Supporting projects from concept design through to installation and commissioning, • Coordinating closely with mechanical engineers, architects, and external consultants, • Attending client and design team meetings, • Carrying out site visits, inspections, and witnessing/commissioning activities, • Degree qualified in Electrical Engineering or Building Services Engineering, • Strong experience in electrical design within the built environment, • Comfortable working across multiple project stages, • Familiar with AutoCAD and/or Revit, • Working towards Chartership or already Chartered (desirable), • Competitive salary (DOE), • 33 days holiday (including bank holidays), • Additional 2-week shutdown over Christmas, • Exposure to high-end, design-led projects, • Close mentorship and direct access to senior engineers and directors, • Clear progression within a growing consultancy This is a great opportunity for an experienced engineer looking to step into a role where they can have real influence on projects and work closely with decision-makers. If you're looking to move away from a large, corporate structure into a more agile, design-focused consultancy-this role offers the chance to develop your career in a more hands-on and meaningful way. Apply now or contact Roberto Sartori on for a confidential discussion. Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. xrnqpay Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Installer London – up to £80,000 LONDON Become a Hillarys Installer – Build Your Own Flexible, Local London Business Looking for a role that lets you work for yourself, set your own hours, and still benefit from the backing of a trusted national brand? Join Hillarys – the UK's leading window furnishings specialist for over 50 years. We're expanding across London, and this is a great opportunity if you're happy to travel into the city while still keeping the freedom and flexibility of running your own schedule. What You'll Do Visit customers in their homes to measure and install our premium blinds and curtains. You'll focus on delivering excellent service, while our Design Consultants handle ordering and payments. No previous experience? No problem. Many of our 1000+ self-employed Installers started with little trade experience. If you do have installation, joinery, carpentry or fitting experience, even better — but our award-winning training gives everyone the skills to succeed. Why This Works for You • Flexibility – Set your own hours and manage your diary around your life., • No need to find customers – We generate the leads; over 70% of customers go on to buy., • Be part of something proven – Installers across the UK enjoy strong earnings and ...

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Apply (by clicking the relevant button) after checking through all the related job information below. The Luton Engineering & Technology team is focused on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. We are looking for anIndustrialisation Engineer to join our Industrialisation team to support Capex / sustainability / NPI projects from cradle to grave across our existing and future programs. Working with Key stakeholders across the site, the post holder key objectives are to support and deliver manufacturing systems in compliance with identified requirements including Producibility, Productivity, Manufacturing cost, Regulatory/Customer/EHS requirements and adherence to Zero Defect Manufacturing (ZDM) standards, whilst delivering these projects to the agreed Budget and Schedule following recognised project management methodologies. TheIndustrialisation Engineer will support and deliver projects including the Planning, Development, Commissioning and Industrialisation of Manufacturing Systems & Processes for the Luton manufacturing site. The engineers development will include internal and external training as required. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday, there is flexibility with working hours as arranged with the manager. There is the requirement to undertake occasional travel when required nationally and internationally, to meet suppliers. Job Responsibilities NPI - the industrialisation Engineer is responsible for the supporting and leading of designated projects including bid development, planning, delivery, and commissioning of Manufacturing Systems and Processes for New Product Introduction programmes [LG3->LG7]. Working with Design Engineering and Programme management, they are responsible for delivering a manufacturing system that fulfils all stakeholder requirements (Safety, Logistics, Quality, Producibility & Business case metrics), including development and maturity of Manufacturing processes and documentation. Capex - the industrialisation Engineer is responsible for the delivery of CAPEX projects, from supporting the business case development through equipment specification, procurement, commissioning and implementation to ensure productivity & quality targets are met. This includes Identification of new technologies and their development & exploitation, and benchmarking of processes across the GKN portfolio of products. Sustainability - the Industrialisation Engineer will lead/support continuous Improvement and obsolescence projects throughout the site as identified by the business. Leadership of Projects - the industrialisation Engineer is responsible for technical leadership of designated industrialisation projects including manufacturing system design, equipment identification and specification, implementation and deliver of APQP activities to ensure robust process capability and ongoing performance. This includes Project Management, Planning, Resource identification, budgeting, & Project reporting within functional and Enterprise standards. Quality Responsible for ensuring implemented solutions deliver the required quality against specification requirements and further deliver sustained manufactured Product quality and drive a quality mind-set within the engineering team and ensure compliance to agreed Customer, Regulatory, Business and functional standards including AS9145 (ZDM). Relationships - Maintain positive, team relationships with internal and external customers, key stakeholders within the business. Foster and champion 5 principles within sphere of influence. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant professional qualification such as HNC/HND/ Degree in engineering (e.g. Automotive, Mechanical, Electrical, Chemical) Technical expertise in Manufacturing Engineering Ability to influence people, build trust and establish effective working relationships within a global organisation Working knowledge of LEAN processes and practices Working knowledge of quality system models such as ISO9001 or AS9100 Experience of collaborating with Procurement, Finance, Works Engineering, Manufacturing Engineering and Operations. Desirable: Project / Program Management Professional Qualification Familiarity with AS9145 APQP process or equivalent Demonstrable experience in Industrial Engineering and demonstrated ability to deliver work in a structured project environment, with evidence of delivering significant improvements in terms of cost/quality of a manufacturing system Familiarity with appropriate digital opportunities for manufacturing systems Familiarity with managing CAPEX / equipment projects through to production implementation. Experience of managing New Product / Process introduction (industrialisation) & existing production process improvements Were seeking people who want to make a difference individuals with the talent, drive and passion to shape the future of what they do. AsIndustrialisation Engineeryoull thrive in a collaborative, cross-functional environment, with exceptional organisational and time-management abilities. Youll confidently support multiple projects at once, demonstrating initiative and clear communication across all levels of the business. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. xrnqpay We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?

Find out exactly what skills, experience, and qualifications you will need to succeed in this role before applying below. Important: All applicants must be able to obtain Security Clearance and must hold dual British Nationality as a minimum. Working: The role offers flexible & hybrid working. It would be beneficial to be on-site 3-4 days a week, depending on the project needs and working remotely other days. Part time working also available The Equipment Design Authority is responsible for ensuring the technical development of certification sign-off and in-service support on two major programmes, Feeding into the Army & Navy. By building on and maintaining a complex structure of functional and physical design, the Equipment Design Authority will ensure every aspect of the product can be verified, validated and accepted into the System capability by our customers. In this role, the Equipment Design Authority will be expected to have a high level of engagement across a variety of technical aspects, including system design, software engineering, electronics and mechanical engineering, in-service reliability and support, safety, cybersecurity and other disciplines. In addition, the Equipment Design Authority will need to ensure the hardware and software design continues to evolve in order to meet the demand of the overall system capability expected by our customers. The Equipment Design Authority will be supported in their career development goals and will ensure expertise are maintained within the team to promote the design goals required of the team and wider organisation. Skill and Experience; • Design leadership for a complex electronics subsystem, • Manage technical risks and opportunities in line with product development requirements, • Developing strong relationships with Product Design stakeholders, • Mastering Systems engineering principles, processes and practices, • Requirements engineering at System, Subsystem or Component level to enable evolution of the product design and system certification, • Broad knowledge associated with the design and build of hardware and software for computer based electronics equipment, • Ability to validate test procedures required to verify products and gather evidence to enable certification. Desirable Experience; • Experience in the Defence or safety regulated environment would be advantageous, • Experience in the Naval / Maritime domain would be advantageous. Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. Company Benefits; • Bonus: Up to £2,500 (based on performance)., • Pension: Up to 14% total contribution., • Parental Leave: Enhanced parental, maternity, and shared parental leave., • Flexi Leave: Up to 15 additional days., • Facilities: On-site perks like subsidised meals and free parking., • Training and Development: Excellent opportunities for career progression and skill development Company Details; • The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business!, • It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People!, • 'Interesting work. Good work-life balance. Employees made to feel valued.' Software Engineer, 5 Dec 2022. *Glassdoor review., • 'Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities' Principal Systems Engineer, 19 Dec 2022. *Glassdoor review., • True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion., • Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. xrnqpay Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. For full information, please get in touch

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. You can get further details about the nature of this opening, and what is expected from applicants, by reading the below. As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required. This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel.The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs. We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As aSenior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. You may have budget accountability for a Work Stream or Work Package Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s) Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s) Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s) Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development. Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC, degree or equivalent experience in electrical or systems engineering Experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment Electronics pcb design experience Good general engineering/technology knowledge base and can demonstrate strategic thinking. Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis. Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods. Strong self-starter, able to execute tasks according to plan. Logical and methodical approach to task planning. Experience managing deployed resources (people you lead but you are not their line manager). Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings. Desirable: A higher degree qualification such as a Masters, PhD or EngD General awareness of budget and schedule management. An awareness of aerospace certification requirements. Experience of the Systems Development Lifecycle process You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. xrnqpay We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?

Earthworks Contracts Manager Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. This is a rare opportunity to take a leading role on one of the UK's most significant earthworks schemes in decades. We're working with a well-established civil engineering contractor, delivering a large-scale earthworks project in the South of England. With a huge earthworks programme already underway and plenty of programme left to run, this is a long-term, high-impact role where you'll have real ownership of delivery, not just oversight. The Role As Earthworks Contracts Manager, you'll take full responsibility for the planning, coordination, and execution of a major earthworks package on a flagship infrastructure scheme. Reporting into senior leadership, you'll be at the centre of operations, driving performance, managing risk, and ensuring delivery stays on track. This is a site-based role suited to someone who thrives in a hands-on environment and is confident leading from the front on complex, self-delivered works. Key Responsibilities • Lead the end-to-end delivery of large-scale earthworks operations, • Take ownership of planning, sequencing, and production outputs, • Ensure high standards across safety, quality, and environmental compliance, • Manage programme milestones and proactively address risks to delivery, • Maintain close integration with site teams to drive productivity and performance, • Oversee cost control, forecasting, and commercial performance alongside project teams, • Manage client relationships, ensuring clear communication and professional reporting, • Handle contractual matters, maintaining compliance and protecting commercial position, • Support and mentor junior engineers and site teams What We're Looking For • Proven experience delivering large earthworks packages in a Project mgr, Contracts mgr, or Construction Manager capacity, • Strong understanding of heavy plant, production rates, and self-delivery models, • Experience working under NEC contracts (NEC4 preferred), • Background in Design & Build projects within civil engineering, • Confident communicator with strong stakeholder and client management skills, • Commercially aware, with the ability to manage cost and programme pressures, • Degree/HND in Civil Engineering or equivalent experience What's on Offer • Competitive salary with performance-related bonus, • Company vehicle or car allowance, • Private healthcare and life assurance, • Pension scheme, • 25 days holiday + bank holidays, • Long-term project pipeline and career progression opportunities, • Lodging allowance where applicable If you're looking for a role where you can genuinely influence delivery on a major earthworks scheme, and see a project through over the long term - then send your CV ASAP! Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. xrnqpay Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

User Researcher (UCD Government) - Remote - Circa £450 per day outside ir35 - 6 months Read on to find out what you will need to succeed in this position, including skills, qualifications, and experience. My client is a global leading IT consultancy. They are seeking an experienced User Researcher to join a multidisciplinary User-Centred Design (UCD) team within a central government client. You will play a key role in ensuring services are designed around user needs, aligning with Government Digital Service (GDS) standards and best practices. Essential Skills & Experience: • Proven experience working within UK central government environments, • Strong knowledge and practical application of GDS principles and service standards, • Demonstrable experience using mixed research methods (e.g. interviews, usability testing, surveys, analytics), • Expertise in synthesising complex research data into clear insights, • Experience presenting findings and engaging with a range of stakeholders, • Ability to advocate for user needs and embed user-centred design practices, • Familiarity with accessibility standards (e.g. WCAG) Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Should the role require the successful candidate to undergo and be eligible for UK Security Vetting. Clearance sponsorship will be provided where required. Due to the nature of the work, candidates should meet the relevant residency requirements. If applicable, Reserved Post nationality restrictions will be confirmed by the client. xrnqpay Damia is committed to inclusive recruitment and welcomes applicants from all backgrounds. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.

Bat Specialist Ecologist A high number of candidates may make applications for this position, so make sure to send your CV and application through as soon as possible. LOCATION FLEXIBLE Leeds, Newcastle, Cockermouth, Leicester, Birmingham, Bristol, London or Southampton Are you a bat specialist, either a BER Registered Consultant or a Natural England Class 2 or above bat survey licence holder? Do you have a desire to apply your bat expertise to a diverse project portfolio with the support of an industry leading team? Have you worked on mitigation licensed projects recently and are looking to become a BER Registered Consultant? Or do you hold a bat disturbance and handling licence in Scotland or Wales, or have licensing and bat project delivery experience in Northern Ireland and ROI? Are you eager to enhance your technical skills and develop your career with a defined professional pathway of your choosing? Do you want to work with a team who value and promote health, wellbeing and a fulfilling working life, recognising the commitment required to conduct nocturnal bat survey work? Role Outline As Tetra Tech builds on its demonstrable track record as one of the leading global environmental consultancies, we are seeking Bat Earned Recognition (BER) Registered Consultants and those who qualify as BER Accredited Agents to strengthen our existing BER expertise in the team. We are also looking to expand our bat expertise in the Scotland, Wales, Northern Ireland and ROI teams. As a multidisciplinary consultancy, our ecologists work closely with colleagues from other teams including Planning, Placemaking, Engineering, Transportation and Asset Management and contribute to the identification of opportunities, tendering and project delivery. With ambitions to grow our UK presence, and to contribute to the continued success of Tetra Techs global business, you will join our established network of over 90+ UK ecologists. Our bat specialists are proactive in developing relationships with colleagues from across the business, liaising with the wider ecology team and other technical teams, and supporting them through all stages of a project. Examples of recent bat projects we have delivered include: • Surveys, BER site registrations and mitigation works for several bat species, including hibernation and maternity roosts across the country;, • Use of advanced bat survey techniques (e.g. on sites in Hampshire, Sussex and Dorset) to confirm whether rare bat species such as Bechsteins are present;, • Use of industry-leading survey technology and data analysis systems to ascertain use of habitats by bats for renewable energy and other land-use projects;, • Survey, licensing and mitigation at a range of sites including listed buildings and complex structures with multiple bat roosts present;, • Survey, BER licensing and mitigation for trees on linear infrastructure projects; and We are looking for bat specialists who are proactive in developing their own knowledge and understanding of bats as well as being able to share their knowledge to support the development of others. We want people who have strong field experience and ambitions to develop their technical skills in line with project requirements. With support from the regional and national ecology teams as well as the national bat lead, and in line with our defined career framework, they will continue to develop their expertise. We Lead with Science and follow the advice of our bat ecologists when investing in top-of-the-range equipment to allow them to deliver their roles successfully. We encourage applications from ecologists who have an interest in technological advancements and who are keen to keep on top of the latest developments and guidance. The role will require site work and some travel dependent on location of projects. However, we operate fully flexible, hybrid working which allows our ecologists to choose where, how and when they work, as long as our clients are receiving the high-quality service they expect. We focus on talent and skills, not postcode. Key Responsibilities • Survey Work, Design and Fee Proposal:Design ecological surveys using industry guidance and prepare fee proposals for projects. Conduct specialist bat surveys and support other protected species projects. Survey work will involve a mix of daytime and night-time based work. The individual will be responsible for coordinating survey schedules and project resources effectively., • Data Analysis, Report Writing and Quality Assurance:Accurately analyse bat data, produce high-quality, detailed reports and mitigation strategies, including and successfully obtaining bat mitigation licences. Experience preparing Ecology chapters for Environmental Impact Assessments and Habitat Regulations Assessment would be an advantage., • Task and Project Management:Actively manage delivery of a task within a project or fulfil the role as a Project Manager (after receiving Tetra Tech bespoke project management training), from inception to completion ensuring timelines, budgets and quality standards are met., • Client Engagement:Work closely with clients, including developers, planners and internal colleagues to provide ecological advice and solutions. Build, develop and maintain strong relationships with clients ensuring clear communication and excellent service., • Team Development:Mentor and inspire junior team members across the national team and provide training and on-site guidance to develop other team members in bat ecology and support them on their journey to obtaining their bat licence., • An appropriate academic qualification in a related discipline, • Natural England Class 2 bat licence and/or equivalent for Scotland, Wales, Northern Ireland, ROI, • Bat Earned Recognition Registered Consultant at any Level preferable (but Level 2 and 3 ideally) or eligible to apply to become a Registered Consultant Over 90+ permanent ecologists, including BER Registered Consultants, roost visitor and low-impact licence holders across 14 offices, working as one cohesive team. • IT systems allow seamless remote and flexible working, so proximity to an office is not a barrier., • Cars or car allowances to every member of the team regardless of grade, including for personal use., • Established TOIL system to allow time management to suit specific personal needs alongside seasonal demands., • Career pathway frameworks provide clarity on how to progress., • We encourage the development of well-rounded ecologists who can talk about all stages of a project., • We offer internal and external training and mentoring, including from our in-house experts., • We award a significant financial bonus to anyone achieving Chartered Ecologist status through CIEEM., • We work closely with many other teams, including our own Planners, Archaeologists, Landscape Architects, Masterplanners and Engineers. We take pride in delivering projects effectively for clients. This often requires colleagues to be together- in offices or on site to ensure the best outcomes. However, when possible, we also advocate for flexibility around how, when, and where you work. There is no 'one approach fits all' each team manages their own way of working, we trust our employees and focus on outputs not inputs. Meeting up with colleague and clients face to face in office environments or on site is important for collaboration, face-to-face meetings, appraisals and development. Inclusion At Tetra Tech, we want everyone to feel like they truly belong. Our goal is to create aworkplace where every person is valued and respected for who they are. Everyone is welcome at Tetra Tech. Opportunities and success should only be determined by attitude, capability and collaborative spirit. xrnqpay Be yourself, without apology. For more information on our company, please visit our website . To apply, please submit your resume and cover letter on the Careers portion of our website at Tetra Tech Europe Careers - Jobs ( ) Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010.

VolkerHighways is a market leader in the delivery of highways and street lighting term maintenance contracts. We build strong collaborative relationships with our clients to drive improvements and efficiency in all our activities. Please ensure you read the below overview and requirements for this employment opportunity completely. We have the capability to deliver major surfacing and public realm infrastructure projects. Our specialist in-house traffic management division provides expert advice and support across the industry, whilst assisting with our own, in-house contracts. We are seeking a talented Bid Writer to join our team in Hoddesdon and help us secure future work through high-quality, compelling tender submissions. As a Bid Writer, you'll lead and coordinate the development of clear, high-scoring written responses for SQs, ITTs and framework tenders. You'll translate technical expertise into persuasive proposals that reflect our strengths, meet client requirements, and maximise our win rates. Key Responsibilities • Produce well-structured, compliant and persuasive responses for highways, street lighting and technology tenders., • Interpret client requirements, scoring criteria and evaluation guidance to shape targeted, winning content., • Plan response structures, storyboards and win themes to ensure clarity and consistency., • Work closely with operational, technical, commercial and sustainability teams to gather and refine information., • Draft, edit and quality-check content, ensuring accuracy, evidence and alignment with the VolkerHighways brand., • Support internal review stages (blue, pink, red, gold) and ensure all submissions are completed to deadline., • Develop case studies and evidence to support a user-friendly bid library., • Experience writing successful bids in highways, street lighting, technology, or other regulated public-sector settings., • Strong understanding of UK public sector procurement and evaluation (e.g. NEC, frameworks)., • Excellent communication skills and the ability to build strong working relationships., • High attention to detail and the ability to manage multiple deadlines simultaneously., • Proficiency in Microsoft Office. Why work with us? VolkerHighways is under the umbrella of VolkerWessels UK which is a multidisciplinary contractor that delivers innovative engineering solutions across the civil engineering and construction sectors including rail, highways, airport, marine, energy, water, and environmental infrastructure. By utilising the specialist skills of each business unit within VolkerWessels UK, VolkerHighways are able to ensure our staff provide unrivalled resources and expertise to our clients. We offer competitive rewards and benefits, recognising the value we place on our employees. We offer a range of benefits, including: • Competitive salary, • Competitive annual leave and an additional day off on your birthday, • Option to buy additional annual leave, • Private medical care, • Pension, • Life Assurance, • Cycle to Work scheme, • Shopping and restaurants vouchers, rewards, and discounts, • Training and development opportunities-comprehensive skills-based training, • Family friendly polices including enhanced maternity benefit, • Flexible working opportunities, • Employee Assistance programme, • Mental health, physical health, and financial support We believe in pushing boundaries in the pursuit of fairness, inclusion and respect. So, our teams can be comfortable that, whatever their background, VolkerWessels UK is a place where they can be themselves and thrive. xrnqpay If you need support with your application, please contact us at Additional information Note for Recruitment Agencies: Our preference is to hire directly, and we will reach out to our Preferred Supplier List (PSL) agencies if this particular role qualifies for release. We kindly request that you refrain from sending speculative CVs. In the event of speculative CV submissions, no fees will be applicable, and we kindly ask that all inquiries to be directed VolkerWessels UK is committed to maintaining healthy, safe and productive working conditions for its entire staff and therefore a drugs & alcohol screening is mandatory for all. #LI-NP1

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. All potential candidates should read through the following details of this job with care before making an application. Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions. We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. ThePrincipal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support. ThePrincipal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions. This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements. Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation. Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods. Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts. Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements. Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences. Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations. Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction. Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning. You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Degree in Aerospace, Mechanical or similar Experience in Aerospace design / or Aerospace product development. Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements. Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches. Familiarity with digital engineering and model based design preferably using CATIA V5. Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders. Desirable: Expert user of CATIA V5 for complex modelling and drawing creation Chartered Engineer status (CEng) Experience working with defence customers and regulatory authorities. Experience in transparencies, composites, or specialist structures/ systems. This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams. You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. xrnqpay We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Based at our Luton Manufacturing site as the Manufacturing Engineering Manager Tooling youll be working across both our Defence and Civil business lines. You will provide and lead a team of Tooling and Cad Engineers in the design, manufacture and maintenance and control of all Site Tools. This will involve the technical capability to create and design tools as solutions to support the manufacturing operations. Youll be accountable for delivering robust, capable manufacturing process technology as it applies to materials, tooling, part fabrication and assembly. The role involves the creation of significant tooling designs from initial concept through to production for the production of aircraft transparencies and Ice Protection Tooling, jigs and fixtures. Among other activities, this will include responsibilities for 4 large CNC machines on site and calibration of current and the development of new or existing tooling. Supporting Manufacturing Engineering teams may also be required. The successful candidate will be experienced in a relevant engineering discipline and have a hands on approach, be able to prioritise jobs, be comfortable liaising with suppliers and other departments. Furthermore responsibilities for Manufacturing Engineering Configuration control, using SAP and more traditional documentation such as Specifications and Routings. The role will also provide leadership, coaching and mentoring to a small team of Tooling Engineers on the Luton site, supporting the Manufacturing Engineering Managers in matters of staff performance and development. The role will also be responsible for the overall load and capacity management of the tooling team members and provide reports and updates on tooling work plans as required by the Manufacturing Engineering Managers and/or Site Head of ME. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. There is the requirement for flexibility for occasional travel in the UK. Job Responsibilities Exemplifying a safety-first mind-set and ensuring compliance with the GKN Aerospace Health, Safety and Environmental policies and standards. Find out more about this role by reading the information below, then apply to be considered. Responsible for the development and support with technical solutions to complex problems within GKN Aerospace environment, our customers and suppliers by utilizing root cause analysis, preventative and corrective action to reduce and support to eliminate non-conformances. Maintain positive, team relationships with internal and external customers, as well as co-workers Responsible for tool fabrication quotes, tooling design and input for new product quotes, tooling configuration changes that involve cost estimation and schedule coordination and New Projects Introduction support. Act as key interface between external tooling suppliers and internal customers such as Program Managers and Engineering Managers Manage and maintain Tooling Engineers workload, skill and development, EHS and welfare to ensure tooling work is sufficiently resourced by the business with appropriate metrics and KPIs Leadership of CNC Engineers and technicians to support production processes on large 5 axis CNC machines Configuration control of Manufacturing documentation to support operations, costings, BOMs routings and specifications. Creation, control and maintenance of master tooling registers for both customer and domestically owned tooling suites Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Technical expertise in Tooling solutions (Engineering), with a professional qualification (BEng, BSc, HNC) or strong background in engineering (Aerospace, Mechanical, or Automotive). Working knowledge of design for manufacture principles and tool/component manufacturing methods and able to provide technical input at all levels of work. Ability to create engineering drawings with an understanding of geometric tolerances and datum features. Organised and structured approach to tasks. Experience in tooling for composites and/or transparencies. Experienced in CAD 3D modelling and drafting (Catia V5). Understanding of inspection/calibration methods and interrogation of results. Be compliant with the Companys Environmental, Health & Safety and Energy procedures. Be proficient in English language, both written and spoken. Desirable: Project Management experience. Understanding of export control and compliance and security marking requirements. Working knowledge of quality system models such as ISO9000, AS9100, or D1-9000. Experience of New Product/process Introduction (Industrialisation) & existing production process improvements. We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Manufacturing Engineering Manager Tooling will have the ability to be agile and shift focus on competing priorities. The successful person will be a self-starter, able to manage own workload with excellent communication skills. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. xrnqpay We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?

About The Role A variety of soft skills and experience may be required for the following role Please ensure you check the overview below carefully. Theres a moment, just before something goes out into the world, when everything clicks into place. The message is clear, the design feels right, and you know its going to connect with someone who needs it. At Alzheimers Society, those moments matter. Every piece of creative work helps people affected by dementia feel seen, supported and understood. As a Junior Designer, youll play a part in making that happen. Working within our Creative team, youll help turn ideas into thoughtful, well-crafted design across digital and print. From campaign visuals to everyday assets, your work will help bring our brand to life in a way that is consistent, accessible and meaningful. Youll collaborate with designers, content specialists and digital colleagues, learning as you go and building your skills in a supportive, fast-paced environment where your work has real impact. What youll do In this role, youll spend your time bringing ideas to life through thoughtful, well-crafted design. Youll work across a mix of digital and print, creating and adapting assets that help communicate important messages and support impactful campaigns. Youll take creative concepts and shape them into clear, engaging visuals that feel consistent, on brand and accessible to a wide range of audiences. Whether youre refining layouts, resizing assets or preparing files for delivery, youll care about getting the details right. Working closely with colleagues across creative, content and digital teams, youll help make sure design supports the bigger picture. Youll be part of conversations, contribute ideas and collaborate to deliver work that lands well and makes a difference. Alongside this, youll manage your own workload, keeping projects moving and maintaining quality even when things are busy. At a glance, you will: • Create and adapt design across digital and print, from social content to campaign materials, • Prepare and deliver artwork that meets brand, accessibility and quality standards, • Collaborate with colleagues to ensure creative supports wider campaigns and activity, • A strong eye for detail and pride in producing accurate, high-quality work, • Good project and time management skills, with the ability to prioritise and meet deadlines, • Confidence managing more than one task at a time, and knowing how to refocus when priorities shift, • A proactive, self-starting approach, taking ownership of your work while knowing when to ask for support, • The ability to build positive working relationships with a range of people

Security Engineer Company Based in Borehamwood Up to £40,000 Company Vehicle, Fuel Card, Overtime, Bank Holidays, Holidays including Christmas 1 x Security Installation Engineer 1x Security Service Engineer Engineer to be no more than a hour away from Borehamwood Multi Skilled Fire and Security Engineers required. To apply for this opportunity you must have or hold the following: • Intruder Service Experience, • Excellent customer service skills, • CCTV IP Knowledge, • Access Control, • Fault Finding experience, • Ability to work by yourself and within a team, • Full UK Driving license This is a well-established and highly recognised organisation in the Fire and Security industry. We offer a wide range of services including design, maintenance and installation of fire systems, intruder, CCTV, and access control. Due to planned growth within the service/installation department. We are now actively looking to recruit an experienced Fire and Security Service Engineers. Benefits Include: • Company Vehicle, • Fuel Card, • Overtime Available, • Mobile Phone, • Call out Allowances, • Generous Annual Leave, including Bank Holidays and Christmas If you are looking for a new challenge and want to work for a forward thinking leading company who will continue to expand and develop. Please contact George on the listed number (phone number removed) or ideally e-mail with a copy of your current CV

Precision finisher? Help us save lives. Deburring Machine Operator | Denham | 37 Hours (Early Friday Finish) The Mission At Martin-Baker, "precision" isn't just a buzzword its a lifesaver. We are the world leader in ejection seats, and every component you touch plays a part in bringing aircrew home safely. We dont just make parts; we make the difference between life and death. The Perks of the Job Work-Life Balance: Finish at 12:00 PM every Friday . Enjoy a long weekend, every weekend. Financial Peace of Mind: Competitive pay + overtime, plus a 9% non-contributory pension (we put in 9%, you don't have to contribute a penny). Security: 4x Life Assurance and a Healthcare Cash Plan. Extras: Cycle to work scheme, nursery benefits, and exclusive discounts via the Martin-Baker+ platform. Subsidised canteen and on-site parking Your Role Working in our fast-paced Machine Shop, youll be the final pair of eyes and hands ensuring our components are flawless. Youll: Use machinery and hand tools to deburr high-precision parts. Set and operate manual machines (milling, broaching, grinding). Read technical drawings and take pride in meeting "zero-defect" standards. Keep your workspace sharp and efficient using 5S principles. What Were Looking For If you have a background in a machine shop and a "quality-first" mindset, we want to talk to you. Youll need: Solid experience in deburring and manual machining. The ability to read and interpret technical drawings. A steady hand and an eye for detail. Bonus points: CNC experience. The Process No black holes here. Youll have an telephone interview with our recruitment team, followed by a site visit to meet the manager and a short practical "trade test" to show us what you can do. About Martin-Baker Martin-Baker is a world-class engineering company with a proud British heritage and a mission that truly matters: saving aircrew lives . From design to manufacture, everything we do supports this purpose. We are committed to inclusion, equal opportunity, ongoing development, and supporting the Armed Forces community as proud signatories of the Armed Forces Covenant. Please note: This role is subject to UK Government BPSS security clearance. Applicants must already have the right to work and currently reside in the UK. Ready to do work that matters? Apply today and join a world-class British engineering legacy. Apply via the link TPBN1_UKTJ

Start your Construction career with Thames Water Kick‑start your future as a Construction Assurance Apprentice, supporting the UK’s largest water and wastewater provider. You’ll support projects through design, build, commissioning, and aftercare—helping integrate new assets smoothly into day‑to‑day operations. What you’ll do as a Construction Assurance Apprentice Level 4 Apprentice Support construction assurance to meet time, cost, and quality targets. Assist with pre‑construction reviews and readiness checks. Monitor contractor safety, environmental compliance, and asset standards. Help resolve site issues, non‑conformances, and deviations. Work with Operations Readiness teams to ensure smooth asset integration. Help prepare and review RAMS, TWOSAS, and permits. Take part in audits and performance reviews, driving improvement. Support planning, lookahead meetings, commissioning, and aftercare. Where you will work: Location: Maple Lodge, Rickmansworth, WD3 9SQ Hours: 36 hours a week across four working days plus one off-the-job training day, Start date: September 2026 Training and qualification: You’ll study with University of Built Environment, one of the UK’s leading training providers. Your training includes virtual sessions each week, as well as live seminars and recordings; tasks and learning resources are set on the VLE. Qualification: Level 4 Construction Site Supervisor Standard- Certificate of Higher Education Construction & Built Environment Duration: Permanent contract with a 42-month structured programme What you should bring to the role: GCSE Maths and English (grade 9-4 / A-C) 64 UCAS tariff points or equivalent A full UK driver's licence is required as you'll be travelling across Thames Water sites. If you use your own vehicle for travel, you'll need to have business insurance Strong time management and organisation skills Is passionate about learning and aligned with Thames Water’s goals for the future What’s in it for you? Starting salary of £22,500 per annum Annual Leave: 24 days holiday per year, increasing to 28 with the length of service (plus bank holidays) Performance-related pay plan directly linked to company performance measures and targets Generous Pension Scheme through AON Access to lots of benefits to help you take care of you and your family’s health and wellbeing, and your finances – from annual health MOTs and access to physiotherapy and counselling, to Cycle to Work schemes, shopping vouchers and life assurance. Find out more about our benefits and perks (Please note different T&Cs apply if on secondment) Who are we? We’re the UK’s largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It’s a big job and we’ve got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to come. Learn more about our purpose and values Working at Thames Water Thames Water is a unique, rewarding, and diverse place to work, where every day you can make a difference, yet no day is the same. As part of our family, you’ll enjoy meaningful career opportunities, flexible working arrangements and excellent benefits. If you’re looking for a sustainable and successful career where you can make a daily difference to millions of people’s lives while helping to protect the world of water for future generations, we’ll be here to support you every step of the way. Together, we can build a better future for our customers, our region, and our planet. Real purpose, real support, real opportunities. Come and join the Thames Water family. Why choose us? Learn more. We’re committed to being a great, diverse, and inclusive place to work. We welcome applications from everyone and want to ensure you feel supported throughout the recruitment process. If you need any adjustments, whether that’s extra time, accessible formats, or anything else just let us know, we’re here to help and support. When a crisis happens, we all rally around to support our customers. As part of Team Thames, you’ll have the opportunity to sign up to support our customers on the frontline as an ambassador. Full training will be given for what is undoubtedly an incredibly rewarding experience. It’s also a great opportunity to learn more about our business and meet colleagues. Disclaimer: due to the high volume of applications we receive, we may close the advert earlier than the advertised date, so we encourage you to apply as soon as possible to avoid disappointment

Are you a driven B2B sales professional who knows how to open doors, build relationships, and convert prospects into meetings? This is a genuinely exciting opportunity to join a specialist, high-performing team operating in the dynamic world of workplace change — and to play a central role in fuelling their growth pipeline. You won't be cold-calling into the unknown. You'll be provided with a curated pool of pre-identified prospects — companies with active or upcoming workplace change projects — and given the tools, platform, and support to convert them into qualified appointments for an established sales team of five. THE ROLE As Business Development Manager, your focus is generating qualified appointments and Microsoft Teams meetings through structured, multi-channel outreach campaigns. Using the Apollo.io CRM platform, you'll design and execute targeted sequences — email, LinkedIn, and phone — aimed at senior decision-makers across procurement, facilities, workplace, and operations functions. This isn't a passive, reactive role. You'll be crafting compelling messaging, refining scripts, creating content for LinkedIn and email marketing, and working closely with the sales team to sharpen what works. It's a role for someone who takes ownership, loves the process of prospecting, and finds real satisfaction in hitting — and beating — their targets. WHO WE'RE LOOKING FOR Candidates will ideally come from a B2B sales or business development background within any of the following sectors — though we're open-minded. If you can sell, we want to hear from you: • Workplace change, fit-out, or workplace design, • Commercial moving, business relocation, or removal services, • Facilities management or property services, • Office furniture, interior fit-out, or FF&E supply, • Commercial real estate or property consultancy, • Document management, records storage, or shredding services, • Technology solutions (AV, IT, telecoms) sold into corporate environments, • Business services — fleet, energy, waste, or similar B2B consultative sales, • Project management or change management consultancy KEY RESPONSIBILITIES • Design and execute outbound sales campaigns using Apollo.io, • Build and optimise multi-channel outreach sequences (email, LinkedIn, phone), • Develop compelling scripts, messaging, and tailored value propositions, • Conduct outreach to senior decision-makers and qualify opportunities, • Book appointments and Microsoft Teams meetings for the sales team, • Maintain accurate CRM records and track activity within Apollo.io, • Follow up in a timely, structured way to maximise conversions, • Collaborate with the sales team to continuously improve campaign performance, • Create LinkedIn posts, case studies, and email content to support brand visibility, • Consistently meet and exceed appointment-setting KPIs WHAT YOU’LL NEED ESSENTIAL: • Minimum 2 years' B2B sales or telesales experience, ideally in business services, • Proven track record in outbound prospecting and appointment setting, • Strong written and verbal communication skills, • Ability to craft persuasive, personalised outreach messages and scripts, • Confidence engaging with senior stakeholders and C-suite decision-makers, • Self-motivated, organised, and comfortable working to clear targets DESIRABLE: • Hands-on experience with Apollo.io for campaign setup and reporting, • Familiarity with LinkedIn Sales Navigator or similar prospecting tools, • Background selling into workplace, FM, property, or transformation sectors, • Experience supporting or working alongside a multi-person sales team, • Flair for social media, content creation, or email marketing WHAT'S ON OFFER • A defined and qualified prospect pool — no cold lists, no guesswork, • Competitive base salary plus performance-based commission, • Clear KPIs and structured support from day one, • The opportunity to work closely with an experienced, high-performing sales team If this sounds like the kind of role where you'd thrive, we'd love to hear from you. Apply now with your CV and a brief note on your most relevant experience

Structural Engineer Herts WD3 £35k-£55k Family run long established small structural design practice require an additional structural engineer to join their happy team. This expansion is due to increasing workload. The role would suit an engineer with a minimum of 3 years of buildings design experience, ideally with experience in the residential sector. Ability to use Autocad would be helpful. The practice is small and very friendly, currently consisting of 6 Engineers and 1 Technician. You should be able to design in all the main materials. Excellent communication skills are essential, as the role will include running your own projects, dealing with clients and architects. The work is very varied, mainly in the residential sector, with projects typically ranging from small up to £4-5m in build value. The station is within easy walking distance from the office. No current or future visa sponsorship can be offered, so you must have the full right to work in the UK long term and live within reasonable commuting distance. Sam Robson (phone number removed) Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Make a Real Impact – Join Us in Transforming Water & Wastewater Treatment in London Are you ready to shape the future of Water & Wastewater treatment and environmental sustainability? We’re offering an exciting opportunity to play a key role in the development and modernisation of our Water & Wastewater Treatment Works across London and the surrounding areas. As part of our dedicated team, you’ll be at the forefront of delivering essential services that protect public health and preserve our environment. This is your chance to contribute to meaningful change, work with cutting-edge technology, and help ensure clean water for generations to come. Apply now to be part of a passionate team committed to innovation, excellence, and environmental stewardship. What you’ll be doing as a Construction Assurance & Integration Engineer Supporting essential design and delivery reviews, identifying risks and issues, and working with stakeholders to resolve them. Conduct health and safety audits to ensure relevant issues are addressed. We are focused on the construction phase of Water & Wastewater projects, assessing and reporting on project progress, addressing issues, and taking the lead on the escalation process if necessary. Ensuring that all non-conformances are identified throughout the pre-construction/construction phase and corrected. Managing, identifying, and resolving snags and liaising with Operators and contractors after the takeover to handle defects, the aftercare process, and performance testing. Monitor, agreed on, and approved takeover tests with the project team. Ensure that the required project documentation meets our specifications and that the information for taking over is approved. Working as an active member of one or more project teams with one or more of our contractors.We are recruiting a role based at Hybrid – Maple Lodge or Hybrid - Hampton Coal Wharf As part of this role, you must be on site 3-4 days a week, 36 hours a week, Monday to Friday. The successful candidate must drive and have a car; the role includes a car allowance of £4,500 per annum. What you should bring to the role Have an HNC or above in an appropriate engineering subject or background in a similar role. Knowledge of health and safety on construction sites, or an SMSTS qualification, can be offered as part of the role if the holder does not currently hold it. Understand design, construction, and operations across industries, including the Water & Wastewater sector. Have a background in project delivery and integration within the construction sector, with on-site experience desirable. Understand Construction (Design and Management) Regulations 2015 with a working understanding of the duty holders’ responsibilities. Be confident in communicating with stakeholders at various levels.What’s in it for you? This is a fantastic opportunity for an established construction and project management professional to work alongside skilled Thames Water project teams. This will enable you to build upon your career into other areas of Project Delivery, as we have to be able to deliver life’s essential services. Competitive salary from £40,000 to £60,000 per annum, depending on skills and experience. Car allowance of £4,500 per annum. 26 days holiday per year, increasing to 30 with the length of service. (Plus bank holidays) Contributory pension – Defined Contribution - Maximum of 12% -2x employee contribution. Personal Medical Assessments – Open to all once a year. Performance-related pay plan directly linked to company performance measures and targets. Wider benefits scheme including our benefits hub, which is packed full of offers and information to save you money and support your wellbeing.Find out more about our benefits and perks (Please note different T&Cs apply if on secondment) Who are we? We’re the UK’s largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It’s a big job and we’ve got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to come. Learn more about our purpose and values Working at Thames Water Thames Water is a unique, rewarding, and diverse place to work, where every day you can make a difference, yet no day is the same. As part of our family, you’ll enjoy meaningful career opportunities, flexible working arrangements and excellent benefits. If you’re looking for a sustainable and successful career where you can make a daily difference to millions of people’s lives while helping to protect the world of water for future generations, we’ll be here to support you every step of the way. Together, we can build a better future for our customers, our region, and our planet. Real purpose, real support, real opportunities. Come and join the Thames Water family. Why choose us? Learn more. We’re committed to being a great, diverse, and inclusive place to work. We welcome applications from everyone and want to ensure you feel supported throughout the recruitment process. If you need any adjustments, whether that’s extra time, accessible formats, or anything else just let us know, we’re here to help and support. When a crisis happens, we all rally around to support our customers. As part of Team Thames, you’ll have the opportunity to sign up to support our customers on the frontline as an ambassador. Full training will be given for what is undoubtedly an incredibly rewarding experience. It’s also a great opportunity to learn more about our business and meet colleagues. Disclaimer: due to the high volume of applications we receive, we may close the advert earlier than the advertised date, so we encourage you to apply as soon as possible to avoid disappointment

Important: All applicants must be able to obtain Security Clearance and must hold British Nationality as their sole/primary nationality. Working: The role offers flexible working but does require engineers on site for a minimum of 3 days per week and is on a secure site where SC clearance is needed. - Due to increased workload, one of our major defence clients is looking for experienced stress engineers to lead the structural design and development of a next-generation complex projects. The Stress Engineers will collaborate closely with multi-disciplinary teams across our UK sites to develop an advanced aerospace structural solution. The team is responsible for the structural and thermal performance of military systems. And will deliver structural and thermal analysis expertise across the whole product lifecycle from studies in the early concept stage and detailed development of engineering designs to manufacturing concessions and in-service support. This role can provide opportunities to gain experience across a wide range of structural analysis disciplines, including but not limited to: Classical hand calculations; CAE Modelling (Static, Dynamic, Fatigue, Aeroelastics, Non-Linear, Impact, Kinematic), Qualification & Design Testing, Fault Investigation & Loads Derivation. - Skill and Experience; Ideally degree qualified in a relevant engineering / science discipline or have significant experience in a relevant field (e.g. Mechanical, Aerospace, Structural Analysis etc.). Proven experience in estimating, planning, leading and delivering a variety of structural analysis work packages, using both classical hand calculation methods and CAE tools. Demonstrated ability in preparing and presenting comprehensive technical reports, conveying complex findings and recommendations to stakeholders, including senior management. Proactive and passionate about developing and improving methods, processes and tools. Able to mentor and support junior engineers providing technical expertise and fostering their professional growth. Self-motivated individuals who are great problem solvers, can take responsibility and work independently as well as a part of multi-disciplinary team. Excellent verbal and written communication skills with the ability to network, influence and manage internal and external stakeholders. Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. Experience using Hyperworks is desirable Composite stress analysis experience would be an asset. Even If you feel like you don't meet every qualification, we encourage you to reach out and apply. Company Benefits; Bonus: Up to £2,500 (based on performance). Pension: Up to 14% total contribution. Parental Leave: Enhanced parental, maternity, and shared parental leave. Flexi Leave: Up to 15 additional days. Facilities: On-site perks like subsidised meals and free parking. Training and Development: Excellent opportunities for career progression and skill development Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. *Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. *Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. For full information, please get in touch

Production Engineer Ruislip Up to £65,000 Are you looking for a role that gives you the freedom to make a real impact and fully utilise your technical expertise? A long-standing, industry-secure engineering business is seeking an experienced and enthusiastic Production Engineer to join their team in Ruislip. This is an exciting opportunity to be part of a well-established operation where you'll help drive innovation, improve manufacturing capability, and play a key part in expanding the company's customer base. About the Role As a Production Engineer, you'll be responsible for programming, setting, and operating advanced 3-5 axis CNC machining centres. You'll create machining strategies from both CAD models and from scratch when required, while producing high-precision components to tight tolerances. This is a hands-on role within a skilled and collaborative team where your experience and ideas will be highly valued. Candidate Requirements Apprentice trained or relevant engineering qualification Minimum 5 years' experience as a 5 Axis CNC Miller/Programmer Knowledge of Heidenhain and Fanuc controls Proficient with SolidWorks and Fusion 360 Ability to create programs from scratch, including when no CAD model is provided Experience with fixture and jig design/manufacture Key Responsibilities Programming, setting, and operating 3-5 axis CNC machining centres Creating machining strategies with or without CAD models Developing full toolpaths using SolidWorks and Fusion 360 Working confidently with Heidenhain and Fanuc controls Designing and manufacturing fixtures, jigs, and work holding solutions Producing high-precision components to tight tolerances Reading engineering drawings/3D models and converting them into efficient machining processes Continuously improving machining methods to maximise productivity and quality Shift Pattern Monday - Friday 08:00 - 17:00 At Morgan Ryder we can provide you with a full range of employment opportunities from short term and fixed term temporary vacancies to permanent positions. We recruit for companies that operate in the following industries: Defence Equipment, Food and Drink Manufacturers, FMCG, Packaging, Engineering, Automotive, Aerospace, Warehousing, Logistics, Waste Management, Petro Chemical, Pharmaceutical, Power & Renewable Energy. Our commitment: Equal opportunities are important to us. We believe that diversity and inclusion at Morgan Ryder Associates are critical to our success as DE&I positive company, so we want to recruit, develop, and keep the best talent. We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic. Please note that calls to and from the offices of Morgan Ryder Associates Ltd. may be monitored or recorded. This is to ensure compliance with regulatory procedures, record business transactions and for training purposes. TPBN1_UKTJ

CNC Programmer/ Operator Ruislip Up to £65,000 Are you looking for a role that gives you the freedom to make a real impact and fully utilise your technical expertise? A long‑standing, industry‑secure engineering business is seeking an experienced and enthusiastic Production Engineer to join their team in Ruislip. This is an exciting opportunity to be part of a well‑established operation where you'll help drive innovation, improve manufacturing capability, and play a key part in expanding the company's customer base. About the Role As a Production Engineer, you'll be responsible for programming, setting, and operating advanced 3-5 axis CNC machining centres. You'll create machining strategies from both CAD models and from scratch when required, while producing high‑precision components to tight tolerances. This is a hands‑on role within a skilled and collaborative team where your experience and ideas will be highly valued. Candidate Requirements Apprentice trained or relevant engineering qualification Minimum 5 years' experience as a 5 Axis CNC Miller/Programmer Knowledge of Heidenhain and Fanuc controls Proficient with SolidWorks and Fusion 360 Ability to create programs from scratch, including when no CAD model is provided Experience with fixture and jig design/manufacture Key Responsibilities Programming, setting, and operating 3-5 axis CNC machining centres Creating machining strategies with or without CAD models Developing full toolpaths using SolidWorks and Fusion 360 Working confidently with Heidenhain and Fanuc controls Designing and manufacturing fixtures, jigs, and work holding solutions Producing high‑precision components to tight tolerances Reading engineering drawings/3D models and converting them into efficient machining processes Continuously improving machining methods to maximise productivity and quality Shift Pattern Monday - Friday 08:00 - 17:00 At Morgan Ryder we can provide you with a full range of employment opportunities from short term and fixed term temporary vacancies to permanent positions. We recruit for companies that operate in the following industries: Defence Equipment, Food and Drink Manufacturers, FMCG, Packaging, Engineering, Automotive, Aerospace, Warehousing, Logistics, Waste Management, Petro Chemical, Pharmaceutical, Power & Renewable Energy. Our commitment: Equal opportunities are important to us. We believe that diversity and inclusion at Morgan Ryder Associates are critical to our success as DE&I positive company, so we want to recruit, develop, and keep the best talent. We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic. Please note that calls to and from the offices of Morgan Ryder Associates Ltd. may be monitored or recorded. This is to ensure compliance with regulatory procedures, record business transactions and for training purposes

Setting Out Engineer Galldris Group Location: Radlett, Hertfordshire An opportunity is available for a Setting Out Engineer to join our team onsite in Radlett, Hertfordshire. To be considered, you will come from a Civil Engineering background with proven experience as a Setting Out Engineer on large-scale civil/highways projects is essential, with Earthworks experience desirable. As the Setting Out Engineer you will be part of a well‑established delivery team operating on a large‑scale civil engineering scheme within the highways and infrastructure sector. Key Accountabilities to include but not limited to: Experience/Knowledge: • Setting out for highways, structures and associated civil engineering works, • Interpreting construction drawings, specifications and design data, • Carrying out surveys, checks and as‑built records, • Maintaining site control and ensuring tolerances are achieved, • Working closely with site management and subcontractors, • Supporting quality assurance processes and health & safety standards, • Resolving technical and setting out issues as they arise on site, • Strong QA/ITP (Inspection and Test Plans) management and ability to interpret technical drawings and specifications Skills: • Previous experience working as a Setting Out Engineer on civil engineering or highways projects, • Strong knowledge of setting out techniques and surveying equipment (GPS, total station), • IT literacy with software such as AutoCAD, Excel, and Word, • Proficient in surveying instruments (Total Station, GPS) and setting out/levelling, • Ability to accurately read and interpret engineering drawings, • A proactive and solutions‑focused approach on site, • A relevant civil engineering qualification or equivalent practical experience Qualifications: • Experience in setting out for civil engineering projects and strong surveying skills, • A degree or HND in Civil Engineering, proven site experience, and proficiency in surveying equipment, • CSCS, • Full driving licence, • Desirable but not essential: IOSH Managing Safely, SMSTS, SSSTS, First Aider, Fire Marshall, IPAF (for MEWPs), Fit for work medical (or safety critical medical), TWS desirable Safety & Compliance: • Knowledge of temporary works, DMRB (Design Manual for Roads and Bridges), and NRSWA (New Roads and Street Works Act) Interested applicants must be eligible to work legally in the UK. Should you feel you have what it takes to be successful in this role then we would love to hear from you. Employee referral scheme - refer a friend or family member to work for Galldris. Galldris is an Equal Opportunities employer and does not discriminate against any protected characteristic. Please note: We are not using recruitment agencies for this role. In the event of speculative CV submissions, no fees will be applicable

Electrical Supervisor – Education Sector (Retrofit Projects) We’re supporting a reputable contractor delivering refurbishment works within live educational environments, who is looking to appoint an experienced Electrical Supervisor to oversee on-site delivery. This role suits someone confident managing teams in occupied buildings, with a strong focus on safety, coordination, and quality. Working Hours • OOH working hours Monday to Friday (4pm till 1am), • Overtime available where required Key Duties • Enforce Health & Safety procedures, including RAMS briefings and PPE compliance, • Supervise operatives, subcontractors, and site activities, • Ensure safe handling and isolation of electrical systems, • Coordinate materials, plant, and workflow to meet programme, • Monitor quality of installation and overall site standards, • Maintain clear emergency routes and safe working environment, • Manage site access, including sign-in/out and end-of-shift security, • Liaise with the Project Manager to resolve technical or design issues, • Act as main on-site contact for stakeholders, • Provide regular progress updates and report incidents, • Maintain site records including diaries, permits, and weekly reports, • Ensure work areas are protected, clean, and operational after each shift Project Scope • Electrical and fire alarm rewire, • Installation of suspended ceilings, • Associated builders’ works and making good Requirements • Enhanced DBS (no unspent convictions), • Black CSCS Card, • First Aid at Work, • NVQ Level 3 in Electrical Installation (or equivalent), • Proven experience supervising electrical works, ideally in live environments

Opportunity to Earn) is based on a competitive rate per parcel (piece-rate) and is regularly exceeded by couriers once up to speed! Your hourly earnings are driven by volume and efficiency, and we boost your income in line with an experienced courier to ensure you earn at least the daily earnings fr

No previous experience is required - full training will be provided. APSE Building Cleaning Innovation Award - 2023. We are looking for people that can bring different perspectives and experiences and especially welcome applications from those who are underrepresented in our organisation.

Please note: We do not accept CV's (either electronically or by mail). There are no formal essential qualifications required for this post. Please note: PVG member’s records are constantly updated with any new vetting information that arises.

We have a legal obligation to ensure that we do not employ any worker who has not been granted the relevant permission to work in the UK. CV Upload: DO NOT upload a CV as this will not be used for shortlisting purposes. Most importantly, you’ll go home knowing you’ve helped someone feel safer, s

Keeping the home clean and safe is no small task, which is why the role of a Bank Housekeeping Assistant is so important.

The successful applicant should have previous cleaning experience in a similar environment and have a friendly, outgoing, and flexible attitude with effective written and oral communication skills.

Please note that salary will be pro-rated for part-time and term-time hours. Please note, successful candidates will be expected to meet the cost of the relevant check which will be deducted from the successful candidate’s first salary payment. Equalities monitoring will be conducted to ensure a f

Previous experience preferred but not essential as full training is provided.

Whether you’re new to care or experienced, this is an opportunity to build a rewarding, long-term career - any truly make a difference!. Experience in supporting adults with challenging behaviour, learning disabilities and/or mental health issues. Committed to the highest standards of care and g

Many couriers exceed this once they’re up to speed! Your pay explained – £15-£18 (Opportunity to Earn) is based on a competitive rate per parcel (piece-rate) and is regularly exceeded by couriers once up to speed! Your hourly earnings are driven by volume and efficiency, and we boost your

No previous experience? No problem! If you have the passion, we’ll provide full training and a structured induction programme. Please note: We are unable to consider Skilled Worker or Student Visa applicants for this role. Whether you’re new to care or experienced, this is an opportu

Become a Self-Employed Delivery Driver with Evri with our new and improved application process now LIVE – apply in as little as 5 minutes and join one of the UK’s largest courier networks Looking for a new role or a more flexible way to earn that fits around your lifestyle? Join Evri

Interested or know someone who might be? Get in touch or apply now. Ensuring compliance with design standards and quality processes. Experience working on complex, coordinated models.

Become a Self-Employed Delivery Driver with Evri with our new and improved application process now LIVE – apply in as little as 5 minutes and join one of the UK’s largest courier networks Looking for a new role or a more flexible way to earn that fits around your lifestyle? Join Evri

LOCATION: NORTHUMBERLAND (NEWBIGGIN, BLYTH, CRAMLINGTON, NORTH SHIELDS). Notifying package managers of all incidents of self-harm, running/missing, substance misuse, damage to property and violent/ abusive behaviour in addition to any other significant risks identified by the support workers immedia

Become a Self-Employed Delivery Driver with Evri with our new and improved application process now LIVE – apply in as little as 5 minutes and join one of the UK’s largest courier networks Looking for a new role or a more flexible way to earn that fits around your lifestyle? Join Evri

SeniorSupport Worker (NO SLEEP INS). Recently receiving 'Good' ratings from Ofsted, they are dedicated to going the extra mile and providing the best support in the industry, thus now aiming for 'Outstanding' rating from Ofsted upon their next inspection. Good news! My client is looking for a Senior

Become a Self-Employed Delivery Driver with Evri with our new and improved application process now LIVE – apply in as little as 5 minutes and join one of the UK’s largest courier networks Looking for a new role or a more flexible way to earn that fits around your lifestyle? Join Evri

Skills, knowledge and experience. Please click on the Apply Now button and fill out our simple one-page application form. As a Housing Support Specialist youll work alongside a multiagency team, supporting people who have experienced the trauma of homelessness, to make positive and lasting changes i

We are recruiting experienced HGV Class 2 (Category C) Drivers for a well-established logistics operation based in Tottenham (N17). EXPERIENCE / QUALIFICATIONS REQUIRED.

We are currently recruiting for an experienced. Full UK driving licence (Category C1 or C) with no more than 6 penalty points. Experience in multi-drop deliveries.