Trabajos en Sheffield - Page 18Crear alertas

Summary This role supports the implementation of company policies and the development of strong HSQE standards. It provides competent advice to operational teams, carries out inspections, and helps host external audits. The position is key in promoting a positive safety culture, engaging the workforce, and acting as a reliable HSEQ point of contact. Responsibilities also include investigating incidents and monitoring HSEQ performance across assigned projects. Duties & Responsibilities • Monitor HSQE performance through inspections, audits and engagement., • Take an active role presenting workforce engagement & behavioural safety sessions., • Identify appropriate improvements and engage with the wider team, to assist in supporting continuous improvement of the Keltbray Business Management System., • Support and / or lead on incident investigations., • Prepare written reports as required., • To promote compliance with all HSQE systems, initiatives and requirements., • Be an active ambassador in the promoting and embedding Keltbray H&S strategy and associated initiatives, including the Big Six risk mitigation and management model., • Address any unsafe condition immediately, ensuring corrective actions are taken and recorded. Ensure all incidents, near misses, and unsafe conditions are promptly reported, logged, and investigated in line with Keltbray procedures. Personal Responsibilities: • Advise on accident and ill health prevention., • Advise on the prevention of damage to plant, equipment and infrastructure., • Advise and promote safe systems of work and good working practices., • Advise on levels of safety training, supervision and instruction and be active in securing high standards in these areas., • To carry out routine and regular inspection of all delegated locations and to submit written reports on the findings on the day of inspection., • To escalate all instances of malpractice, all reoccurring findings and poor working standards, • Assist in the production, review and monitor suitability and effectiveness of risk assessments and safe systems of works., • To stop any work activity where hazardous situations are encountered and there is an imminent risk of serious personal injury., • Assist in / lead investigations into all events, identify underlying and root causes and make recommendations for SMART remedial actions to prevent recurrence., • Advise on the selection, maintenance and monitoring the effectiveness of personal protective equipment., • To draft and / or advise in the preparation of 'assessments' required by legislation such as but not limited to, risk, COSHH, HAVS and noise., • Initiate and maintain positive measures to raise the level of the HSQEW performance, safety compliance and awareness, • Liaise with inspectors of the Health and Safety Executive, local authorities, fire, police, ambulance services, as necessary, and to foster links with local safety groups, trade associations, training boards, Institute of Occupational Safety and Health etc., • Advise on the safeguarding of members of the public and other persons who may be affected by site operations and activities., • Assist with the maintenance of all Company Accreditations. Requirements Essential • Institution of Occupational Safety and Health (IOSH) – Technician, • NEBOSH National Certificate in Construction Health and Safety, • NEBOSH Diploma or equivalent, • Kelvin TopSet 1 Day Investigator, • Accident Investigation Report Writing, • Environmental Awareness Knowledge: Essential • Minimum of 2 years’ experience of working within the relevant sectors, to include highly regulated industries, • Minimum of 5 years’ experience of working within the relevant sector, • Temporary Works Awareness Diversity & Inclusion We advocate for difference and champion diversity to foster an inclusive environment that allows our people to bring their true selves to their work every day and enable our people to thrive by promoting health and preventing harm. Keltbray welcomes everyone who shares our values, regardless of their age, belief, disability, ethnicity, gender identity, maternity status, marital status, pregnancy, religion, sex or sexual orientation.

Are you an experienced operational excellence leader with a strong background in manufacturing performance and KPI governance? Are you passionate about building a Zero Loss culture and driving fact-based decision making across multi-site operations? Are you motivated by embedding world-class continuous improvement systems in a fast-paced, high-compliance environment? MacGregor Black is partnering with a leading manufacturing business on the search for a Head of Operations Excellence & Performance. This is a permanent role based in the UK, with responsibility across a multi-site manufacturing network. Key Responsibilities: • Own and evolve the Group-level Operations KPI framework, ensuring clear, reliable and business-aligned performance dashboards across Industrial and CS&L functions., • Lead day-to-day KPI tracking, analysis and root cause investigation, enabling fact-based performance dialogues with site leadership teams., • Define and drive the Zero Loss Culture strategy, embedding TPM, Lean and OPEX methodologies across the manufacturing network., • Build and deliver multi-tiered capability and leadership programmes that strengthen continuous improvement behaviours at all levels., • Partner with Finance and IT to strengthen data architecture, automation and system integration (MES, ERP, WMS), ensuring data integrity., • Identify, develop and deploy best practices and breakthrough improvements across plants, spanning processes, technologies and ways of working., • Support COO-level governance by ensuring alignment between Industrial Master Plan initiatives and Group strategy, tracking delivery and benefits realisation. What We're Looking For: • Experience progressive operational leadership experience within a manufacturing environment., • Background in fast-paced, high-compliance industries such as FMCG, pharmaceuticals or chemicals., • BSc in Engineering or a related scientific discipline (preferred)., • Proven experience designing and embedding manufacturing excellence and continuous improvement systems across multi-site operations., • Strong track record of delivering measurable results across productivity, quality, cost, safety and waste reduction., • Highly capable change leader, able to influence cross-functional teams and drive adoption of new processes and systems., • Confident communicator, comfortable leading fact-based performance dialogues with senior site leadership teams. Salary Circa £110k + benefits package. Please contact Rob Blackburn today for further information.

AgentForce Tester Level: Mid–Senior Location: London, Remote First (1–2 days per month onsite max) Function: AI Testing / Quality Assurance Industry: Public Sector Rate: £575–£595 per day Clearance: SC Clearable Contract: 6 Months (High Extension Potential) About the Role Our client is delivering AI-powered digital capabilities within a secure public sector environment. They are building and scaling intelligent agents on the Salesforce AgentForce platform and need a dedicated Tester to ensure these agents are accurate, reliable, safe, and production-ready. This is not traditional UI testing. You will be validating AI behaviour, conversational accuracy, workflow logic, integrations, and compliance standards. You will sit between Product, Engineering, and business stakeholders to ensure agents perform as intended across real-world use cases. What You’ll Be Doing • Designing and executing structured test plans for AI agents within the AgentForce environment., • Testing conversational flows, APIs, integrations, CRM interfaces, and multi-channel deployments., • Validating intent recognition, response quality, business rule adherence, and safety guardrails., • Conducting regression testing after retraining, fine-tuning, or configuration updates., • Logging reproducible defects and working closely with engineers to validate fixes., • Analysing conversation logs to identify misclassifications, edge cases, and optimisation opportunities., • Monitoring metrics such as accuracy, latency, escalation rates, and user satisfaction., • Supporting compliance, audit readiness, and responsible AI standards in a regulated setting. Ideal Background You will demonstrate: • Proven experience in software testing, QA, or conversational AI testing., • Exposure to functional, regression, exploratory, and UAT methodologies., • Understanding of AI or LLM-based systems, chatbot testing, or NLP concepts., • Working knowledge of JSON, APIs, and automation frameworks., • Strong analytical capability with attention to detail., • Experience in agile delivery environments. Highly desirable: • Experience with Salesforce AgentForce, Agent Builder, or AgentForce Testing Centre., • Exposure to Einstein or similar AI agent platforms. What You’ll Receive • £575–£595 per day., • Remote-first model with minimal London travel., • 6-month initial contract with strong likelihood of extension., • Exposure to AI transformation work within a high-impact government department. Who Should Apply This role suits a technically strong QA professional who understands AI systems beyond surface-level testing. You are structured, detail-driven, comfortable working with ambiguity, and capable of challenging agent outputs where logic or safety is compromised. You must be SC clearable and a sole British national. Non-cleared profiles may be considered if technically strong. If your background includes AgentForce Builder or Testing Centre experience, flag this clearly when applying. Interested candidates should respond with availability and confirmation of clearance status.

Job title: Principal AI Architect Location: Edinburgh / Remote Aveni is redefining how financial institutions use AI. We build real, production-ready agentic systems that reshape how banks, advisers and financial services firms operate, replacing fragmented processes with intelligent, end-to-end workflows. We have been recognised as Fintech of the Year for two consecutive years and awarded Best Specialist Technology Service at the Professional Adviser Awards 2025. Backed by leading investors including Puma Private Equity, and commercially supported by Lloyds Banking Group and Nationwide Building Society, we previously completed one of Scotland’s largest Series A rounds. Since then, we’ve continued to grow rapidly as adoption of AI in financial services accelerates, and we’re now scaling our engineering organisation to meet that demand. Our engineering team includes experienced software engineers and PhD-level AI specialists, with strong ties to the University of Edinburgh, giving you access to exceptional expertise and opportunities for continuous learning as part of the day-to-day work. Summary We are looking for a Principal AI Architect to drive the design and implementation of cutting-edge AI architectures. This role is ideal for a technical leader with deep expertise in AI, LLMs, and autonomous systems, who thrives on solving complex challenges in a fast-paced, innovative environment. You will shape the strategic direction of AI systems, mentor engineering teams, and collaborate with stakeholders to ensure alignment between AI capabilities and business objectives. If you have a passion for building scalable, intelligent solutions that push the boundaries of AI, we’d love to hear from you. Key Responsibilities • Design and develop scalable AI architecture, including LLM integration, APIs, and agentic modules., • Define the technical roadmap for AI systems, ensuring high availability, security, and performance., • Collaborate with data scientists, ML engineers, and software engineers to optimise model deployment and infrastructure., • Establish best practices for AI/ML pipelines, including data ingestion, model training, and inference., • Research and integrate emerging AI technologies, frameworks, and methodologies., • Ensure compliance with regulatory and ethical AI standards. What We’re Looking For • Extensive experience in software architecture, with a focus on AI/ML systems., • Strong knowledge of cloud platforms (AWS, Azure, and GCP) for AI/ML workloads., • Hands-on experience with LLMs (OpenAI, Anthropic, Mistral, etc.) and fine-tuning techniques., • Proficiency in designing and implementing API-driven architectures., • Experience with vector databases, retrieval-augmented generation (RAG), and multimodal AI systems., • Familiarity with AI orchestration tools (e.g., LangChain, LlamaIndex, Ray, Dask)., • Strong programming skills in Python, Go, or JavaScript., • Understanding of MLOps and CI/CD pipelines for AI/ML models., • Knowledge of security best practices for AI applications., • Strong analytical and problem-solving abilities., • Excellent communication and technical documentation skills., • Ability to mentor and guide engineering teams on AI best practices., • Ability to work with academics and translate key technical progress to senior business stakeholders What We Offer • A collaborative and innovative work environment with awesome career growth opportunities, • 34 days holiday plus your birthday off (inclusive of bank holidays), • Share options – we believe in shared success, • Skills development – continuous learning is at our core, expect the development to be front and centre of everything you do, • Remote and flexible working – remote, co-working spaces, or a mix of both, • Life insurance, income protection and private health care, • Freebies and discounts at a range of retailers, • Emotional wellbeing (Employee assistance programme provides access to 24/7 employee counselling and emotional support), • Cycle to work scheme, • Pension scheme (employer contribution matched up to 5%) Join Us in Making a Difference At Aveni, we believe that diversity drives innovation. We're committed to building a team that reflects the diverse communities we serve and creating an inclusive workplace where everyone feels valued and empowered to contribute their best work. If you're passionate about leveraging technology to drive positive change and want to be part of a team that's shaping the future of financial services, we'd love to hear from you. We know that some people are likely to only apply where they meet 100% of requirements, but we’d like to hear from you anyway. Apply now to join us on our mission to transform the financial services industry through AI!

Job Title: Databricks Architect Location: UK/Europe - Remote Engagement Type: Contract (Outside IR35) Role Overview We are seeking a Senior Databricks Architect with 15+ years of experience in Data Engineering/Analytics to design and deliver scalable, secure, and cost-efficient data solutions on AWS. This is a leadership role requiring strong hands-on expertise, proactive risk management, and excellent stakeholder communication skills. Key Responsibilities • Architect and implement data solutions using Databricks on AWS, PySpark, and Python, • Lead cloud migration initiatives, including on-prem to AWS migrations, • Drive GenAI-enabled automation for data asset migration, • Develop scalable data models and deliver actionable business insights, • Design and optimize ETL pipelines (Informatica or similar tools), • Build and deploy PySpark applications for large-scale data processing, • Work on LLM pretraining, fine-tuning, augmentation, and optimization, • Ensure high data quality through cleaning, transformation, and validation (Python/SQL), • Automate data workflows to enhance scalability and efficiency, • Maintain clear technical documentation and best practices Required Experience • 15+ years in Data Analyst/Data Engineer/Data Architect roles, • Strong expertise in Databricks on AWS, • Advanced Python (Pandas, Scikit-learn) and SQL skills, • Proven experience in large-scale cloud data migrations, • Hands-on experience with LLMs and GenAI-based automation, • Strong experience designing secure, high-performance data architectures Key Competencies • Proactive risk & issue management, • Strong requirement clarification and stakeholder engagement skills, • Excellent communication – able to translate technical insights into business value, • Critical thinker with strong problem-solving capabilities, • Self-driven, autonomous, and collaborative approach

Glazing Role Summary Pay: £28,000.00-£32,000.00 per year based on experience level Location: Onsite at our Morecambe Lab Type: Full-time 37.5 hours a week, potential shift working/extended hours may be required in line with the needs of the business, Part time options available (minimum of 28 hours) Job Description: At Optimum RX Lens Specialists, our people genuinely shape our future because we’re proud to be an Employee Ownership Trust (EOT) business. Every team member has a voice, a stake, and a real influence on how we grow. As we continue to expand, we are excited to welcome an experienced Glazing Technician who shares our passion for craftsmanship, collaboration, and innovation. You’ll play a key role in delivering the high-quality glazing our partners trust, while contributing to a positive, people-first culture. Glazing Technician Optimum RX Lens Specialists About Optimum RX Optimum RX is a specialist lens laboratory built on teamwork, innovation, and a real sense of ownership. As an EOT business, every person here helps shape our success and shares in the achievements. Our culture is positive, friendly, and supportive, with a genuine focus on people and continuous improvement. We’re growing fast, and due to ongoing expansion, we’re excited to offer a new opportunity for an experienced Glazing Technician to join our brilliant, hard-working (and fun!) lab team. Every day in the lab brings something new, different jobs, new challenges, fresh ideas, and plenty of teamwork. As an experienced Glazing Technician, you’ll take on advanced glazing tasks, support colleagues, and help deliver the exceptional quality we’re known for. You’ll also be part of a workplace where your ideas matter and your efforts are recognised - one of the great benefits of being part of an EOT! What You’ll Do: Complete advanced glazing, edging, and finishing with accuracy and pride. Operate, maintain, and confidently work with glazing equipment - MEI experience highly desirable but not essential Tackle specialist, complex work (rimless, wrap, drill-mounted, high-curve) with skill and confidence Lead by example in quality control and uphold our commitment to craftsmanship Work closely with the wider team to keep production efficient, positive, and collaborative Bring ideas, creativity, and energy to our continuous improvement efforts Help maintain the fun, friendly culture that makes Optimum RX such a great place to work! Who You Are: Experienced in ophthalmic glazing with excellent technical skills Positive, approachable, and a team player Excited by innovation and new ways of working Comfortable with glazing machinery - MEI experience is a big plus Someone who enjoys a supportive, upbeat workplace Motivated by being part of an EOT where every voice counts and being excited about what’s next?! What We Offer: A positive, people-focused culture backed by the rewards of EOT ownership Competitive salary + benefits A fun, friendly team that supports each other Training, progression, and opportunities to grow your career Being part of a business that embraces innovation and celebrates success together. Job Types: Full-time, Part-time, Permanent Benefits: Canteen Company pension Cycle to work scheme Employee discount and a free pair of glasses each year Free on-site parking

Iron Mountain is seeking a skilled and motivated DevOps Engineer to join our global information management team in UK (100% remote). In this role, you will be responsible for providing critical technical support for applications and hardware, managing our observability strategy, and ensuring the global delivery and performance of our services. You will collaborate closely with network services, software engineering, and development teams to maintain a highly reliable and scalable environment. What You'll Do (Responsibilities) In this role, you will: • Design and Automate Infrastructure: Build and maintain cloud infrastructure on AWS, GCP, or Azure, utilizing tools like Terraform, Ansible, or CloudFormation to automate provisioning., • Optimize CI/CD Pipelines: Develop and manage continuous integration and deployment pipelines using Jenkins, GitLab, or ArgoCD to streamline software delivery., • Enhance Observability: Implement monitoring and logging systems (Prometheus, Grafana, Datadog) to define alerts, dashboards, and log-based metrics that improve application availability., • Lead Incident Management: Respond to real-time outages, perform root cause analysis, and participate in on-call rotations to ensure rapid service restoration., • Ensure Application Sustainment: Oversee the full lifecycle of critical applications, including upgrades, patching, and scaling services to meet global demand while maintaining strict SLOs., • Drive Reliability and Security: Implement self-healing systems, disaster recovery strategies, and security best practices, including regular vulnerability patching and audits. What You'll Bring (Skills & Qualifications) Specific requirements: • Must have UK passport, be UK based for more than five consecutive years and able to obtain Security Clearance The ideal candidate will have: • Previous experience as DevOps Engineer with focus on SRE Engineer., • Strong technical expertise in managed Kubernetes services and cloud networking concepts (VPC, DNS, Load Balancers, and TCP/IP)., • Proven ability in complex troubleshooting using debugging tools like tcpdump or strace and log aggregation tools like the ELK stack or Splunk., • Software Development skills in Python, Java, or .Net, along with experience developing scalable microservices and REST APIs., • A Bachelor's Degree in Computer Science, Engineering, or a related field., • Preferred Certifications: Scrum Master, PMP, or Agile SAFe certification. What We Offer (Benefits): • Location: England (100% remote)., • Competitive Compensation: Salary and benefits aligned with your professional experience., • Work-Life Balance: Flexible work options and alternative arrangements to support your personal needs., • Health & Wellness: Comprehensive health, wellness, and retirement plans., • Growth Opportunities: Access to continuous learning and professional development to accelerate your career. Ready to join the team? Apply Today! Do not miss the chance to join a global leader in storage and information management services.

Field Service Engineer – Food Machinery UK Training → USA Relocation (Visa Sponsored) Location: Birmingham, UK / Kentucky, USA Travel: North America Alexander Steele is partnering with a US-based food machinery and equipment supplier to recruit a Field Service Engineer for an exceptional international opportunity. The successful UK national will complete a training period with the equipment manufacturer in Birmingham, before relocating to Kentucky, USA to support food manufacturing customers across North America. The Role • Install and commission new food manufacturing equipment, • Service, maintain, and repair existing machinery, • Provide on-site technical support to customers, • Travel extensively across North America What’s Offered • Full visa sponsorship and application management, • Accommodation covered for the first 12 months, • Structured UK-to-USA training and relocation, • Long-term career development with a growing international business About You • UK national (visa requirement), • Field Service / Maintenance Engineering background, • Experience with food, packaging, or industrial machinery preferred, • Willing to travel and work independently Apply through Alexander Steele for a confidential discussion.

Location • Remote, but requirement to meet up once a month for in-person collaboration day, • UK based About Akixi Akixi is a fast-growing SaaS analytics company delivering real-time and historical insights for cloud-based communication platforms, including Microsoft Teams, Cisco BroadWorks, and Webex Calling. Our analytics help businesses enhance customer experience, optimize productivity, and drive performance across voice and collaboration channels. Job Summary We are seeking a Senior Platform Engineer with a deep understanding of AWS cloud infrastructure, Infrastructure-as-Code (IaC) tooling such as Terraform, and configuration management using Ansible. The ideal candidate will be a self-starter, passionate about Site Reliability Engineering (SRE) principles, and thrive in collaborative environments. You will play a pivotal role in automating infrastructure, improving reliability and scalability, and ensuring smooth CI/CD pipelines across multiple environments. You'll work closely with software engineering, and security teams to drive platform excellence. Key Responsibilities • Design, build, and manage scalable, secure, and resilient infrastructure on AWS using Terraform (modularized, reusable components)., • Implement configuration management solutions using Ansible, including playbook development, inventory structuring, and role-based automation., • Manage secrets securely using services such as AWS Secrets Manager or HashiCorp Vault., • Implement robust monitoring, alerting, and observability tooling (e.g., CloudWatch, Prometheus, Grafana, Datadog)., • Participate in incident response, root cause analysis, and resilience improvements., • Maintain and evolve CI/CD pipelines using tools such as GitHub Actions, Bitbucket Pipelines, or Jenkins., • Automate deployments for container-based workloads on ECS (Fargate), or Lambda, and manage supporting infrastructure., • Collaborate with development teams to optimize build/deploy cycles and reduce lead time for changes., • Ensure security best practices are embedded into infrastructure provisioning and pipeline execution., • Support compliance and auditing by implementing guardrails and controls as code (e.g., AWS Config, SCPs, IAM policy management)., • Some OOH work is required to maintain the production systems and also will be part of OOH critical ticket rota. Required Skills & Experience • 5+ years in DevOps, SRE, or Cloud Engineering roles., • Expertise in AWS core services: EC2, IAM, VPC, ECS/Fargate, CloudFormation, CloudWatch, RDS, DynamoDB, S3, Lambda., • Strong proficiency in Terraform (HCL) – including workspaces, modules, and Terraform Cloud or similar., • Ansible experience – developing roles, dynamic inventories, managing remote configurations., • Strong scripting knowledge (Bash, Python, or Go)., • Experience with container orchestration and deployment (Docker, ECS, or Kubernetes)., • Proficient with GitOps or IaC-based workflows., • Familiarity with Google SRE practices, particularly around reliability, observability, and operational excellence., • Understanding of systems reliability metrics and associated tooling Soft Skills & Behaviours • Self-driven with a bias toward action and ownership., • Excellent communicator, able to collaborate across disciplines and levels of technical understanding., • Experience working as part of a cross-functional team., • Comfortable working in agile environments (Scrum/Kanban).

Head of Quality – QP We are partnering exclusively with a rapidly expanding advanced pharmaceutical organisation to appoint a senior leader responsible for Quality Assurance across multiple sites. Experience and eligibility as a Qualified Person (QP) is essential. This position combines strategic oversight with hands-on leadership. While QP status is critical from an experience perspective, this role is not expected to perform as an operational QP. It is critical to have managed or overseen QP teams and can demonstrate the capability to guide complex operational and compliance challenges. An understanding and capability of working in fast paced settings with the ability to make critical decisions is essential. The role is fully remote and not tied to a single manufacturing site. However, regular on‑site engagement is essential, with an expectation to visit each UK facility on a regular basis. Flexibility to travel across the UK is therefore critical. A company vehicle or car allowance will be included as part of the overall benefits package. For further information, please contact Mark Bux-Ryan. Key Experience Required • Robust and proven Quality Assurance background within the pharmaceutical sector, • Eligibility and previous experience as a QP, • Deep understanding and practical application of GMP, • Demonstrable people‑leadership capability and genuine passion for leading teams, • Hands-on experience within aseptic or sterile manufacturing environments, • Ability to lead teams effectively in a virtual setting; prior multi-site leadership is beneficial but not essential Keywords: quality, QA, compliance, GMP, manufacturing, sterile, aseptic, senior, head, director, manager, team leader, QP, Qualified Person, terminal, sterilisation

SAP Core Banking Lead Level: Associate Manager Location: London / Bristol / Manchester Industry: Financial Services Consulting Salary: £70,000 to £80,000 + benefits and bonus About the Role Our client is a global professional services powerhouse, operating at massive scale across strategy, consulting, technology, and operations. They work with the world’s largest banks, governments, and institutions to modernise core platforms that underpin national and global financial systems. This role sits within their Banking Transformation practice, focused on the migration of SAP Banking Services 9 to SAP S/4HANA Transactional Banking (TRBK). These are not pilot projects or proofs of concept. This is enterprise-grade transformation, delivered at scale, for major banking clients. You will be trusted with real responsibility from day one, working directly with senior client stakeholders and leading critical parts of complex SAP Core Banking programmes. Flexibility and mobility are required, as client presence is a key part of how this organisation delivers outcomes. What You’ll Be Doing • Leading SAP S/4HANA Transactional Banking (TRBK) transformation programmes for major banking clients., • Driving platform consolidation, data migration, and process harmonisation across legacy and modern banking estates., • Acting as a recognised SAP Core Banking subject matter expert within large, multi-disciplinary delivery teams., • Defining target-state architectures covering deposits, lending, payments, and account management., • Designing and deploying SAP Core Banking components including TRBK, Payments Central, and SAP Fioneer solutions., • Working closely with senior business and IT stakeholders in Retail Banking, Commercial Banking, and Payments., • Leading application design and development activity, owning delivery quality and outcomes., • Mentoring consultants and helping grow the SAP Banking capability within the wider transformation practice., • Supporting sales and pre-sales activity by shaping credible, value-led SAP Core Banking solutions. You will bring: • Deep hands-on experience with SAP S/4HANA Core Banking and Transactional Banking (TRBK)., • Proven involvement in SAP Core Banking upgrades or migrations, ideally within large banking environments., • Strong knowledge of SAP Payments Central, Product Factory, and Business Partner integration., • Experience leading technical design and contributing to cross-team architectural decisions., • Confidence working in complex, client-facing delivery environments., • Understanding of banking regulations, risk, and compliance requirements., • Strong communication skills and the credibility to operate at senior stakeholder level. Nice to have: • SAP ABAP for HANA., • SAP Fioneer solutions., • Exposure to platforms such as Temenos, Mambu, or Thought Machine., • Agile delivery experience (SAP Activate, SAFe). What You’ll Receive • Base salary of £70,000 to £80,000, depending on experience., • Clear, structured progression within a global consulting organisation known for promoting from within., • Exposure to some of the largest and most complex SAP Core Banking transformation programmes globally., • The chance to build a long-term career at the centre of banking technology change., • Access to world-class delivery frameworks, tooling, and learning pathways. Who This Role Suits Best This role is ideal for SAP Core Banking specialists who want: • Bigger programmes, higher stakes, and real delivery ownership., • Exposure to tier-one banking clients., • A clear step into Associate Manager–level leadership., • The credibility that comes from delivering transformation at global scale. This is not a junior or back-office role. It suits people who want ownership, client exposure, and progression within a global transformation practice delivering enterprise-scale SAP programmes.

Join our latest project! CMC are supporting a defence-focused engineering programme (SC not required) and are looking for an experienced Software Validation Engineer to support a critical compliance phase. An embedded C solution has been developed on a PIC18 microcontroller, and we now require an experienced engineer to review, validate, and assess the software against recognised safety standards. This is a remote, milestone-driven contract with direct access to the technical lead and full documentation provided (source code, compiled data, architecture flow). The project will commence at the beginning of April. What you’ll be doing: • Reviewing embedded C code, • Assessing compliance against safety standards, • Producing a formal validation/reporting pack, • Supporting software sign-off in a regulated environment Required Skills & Experience: • Strong experience in embedded C development, • Experience working with PIC microcontrollers (ideally PIC18F series), • Familiarity with MPLAB, • Proven background in software validation within safety-critical environments, • Experience working to recognised safety standards (AOP-52, IEC, MIL, DEF or similar), • Ability to review and assess existing codebases for compliance, • Experience producing formal technical compliance documentation, • Eligibility for BPSS If you think you are suitable, please apply below! Get in touch CMC provide expert engineering solutions on an international capacity for advanced engineering projects. Established in 2016, we set out our mission to be the best service-driven consulting business in global STEM markets, and after rapid growth in just a few years, we’re already delivering true expertise to major technology brands and leading companies around the world. As we expand our reach and take on new projects, we have assignments available for experienced engineering and safety-critical software professionals to join our consultancy and deliver the expert solutions and high level of service we’re known for across multiple ventures. By partnering with CMC you get the chance to work with some of the world’s leading technology specialists. From our global offices we support you with each new project, providing a complete scope of work definition ahead of any engagement so you know exactly what’s required by the assignment before you land on-site. As projects are completed, we continue to support you by securing your next opportunity from our global network of leading technology companies. No terminology in this advert is intended to discriminate on the grounds of experience, and we confirm that we are happy to accept applications from persons of any experience for this role.

Full-Stack Engineer (Java / AWS / Angular) – UK Valcon is a north-western European consulting, technology, and data company with offices in the UK, the Netherlands, Denmark, Sweden, and Croatia. We are private-equity backed and one of the fastest-growing consultancies in Europe, bringing together some of the most exciting technology and consulting teams. We are looking for self-motivated, logical, and intellectually curious Full-Stack Software Engineers to join our expanding Software Engineering capability in the UK. This is an opportunity to help shape the technical landscape while delivering a variety of challenging projects. As a Full-Stack Engineer at Valcon, you will work in small, multi-disciplinary teams to design, develop, and implement innovative software solutions. Responsibilities • Design, develop, and maintain enterprise-grade Java backend services and APIs., • Build front-end applications using Angular for modern, responsive user interfaces., • Develop cloud-native solutions on AWS, including services like Lambda, Fargate, Cognito, and RDS (Postgres)., • Own features end-to-end, collaborating closely with clients and project teams., • Contribute to technical decisions, architecture discussions, and code quality practices. Experience & Skills • Strong experience in Java backend development (Spring Boot or equivalent)., • Experience with AWS cloud services (Lambda, Fargate, RDS, Cognito)., • Experience with Angular (or similar modern front-end frameworks)., • Solid understanding of CI/CD, version control (Git), and infrastructure-as-code principles., • Customer-focused with strong communication, influencing, and relationship-building skills., • Comfortable working in a dynamic project environment and managing change effectively. About You • Takes ownership and initiative, with a positive and proactive approach., • Calm and decisive under pressure, able to balance delivery with long-term technical quality., • Enjoys learning new technologies and contributing to a growing technical community. What We Offer • Hands-on, impactful work across varied projects and clients., • Clear career progression, with opportunities to broaden responsibility and influence technical direction., • Collaborative, informal culture with flat hierarchy and strong emphasis on skill-sharing., • Exposure to cutting-edge cloud and software technologies while staying close to the code.

Title: Principal Forward Deployed Engineer – AI & Customer-Facing Technical Leader Location: Remote Travel: Customer visits 4–5 days/month; occasional team gatherings Salary: Senior: €130–150k base + growth trajectory Principal: €160–200k base + package discussion Tech: Python, JavaScript, Azure, AWS, AI, LLM's, RAG Industry: AI Consultancy The Role We’re looking for talented engineers to join our customer-facing AI practice, from Senior Forward Deployed Engineers through to Principal-level AI technical leaders. You’ll work directly with clients to uncover problems, build prototypes, and guide full AI-enabled solution lifecycles. This is a role for engineers who: • Enjoy building real software that makes a difference, • Are passionate about AI and its practical application, • Thrive at the intersection of technical leadership and client engagement What You’ll Do Customer-Facing Leadership • Lead discovery workshops with technical and business stakeholders, • Represent the organisation’s technical capabilities in high-stakes client meetings, • Build and iterate working AI prototypes quickly, • Architect scalable, maintainable systems from prototype to production, • Guide engineers through technical delivery, code reviews, and architectural discussions, • Elevate team capabilities through knowledge sharing, mentoring, and internal workshops, • Implement AI solutions leveraging LLMs, foundation models, and retrieval-augmented generation (RAG) systems, • Design evaluation frameworks addressing bias, hallucination detection, and business impact, • Explore novel AI applications while integrating traditional ML techniques where appropriate Who We’re Looking For For Senior Engineers: • 5–8+ years building robust, scalable software systems, • Full-stack development capability across modern technologies, • Client-facing experience or technical consulting skills, • 8+ years delivering complex, enterprise-grade software, • Proven AI/ML expertise with production deployment experience, • Advanced knowledge of transformer architectures, foundation models, and prompt engineering, • Senior stakeholder engagement experience and ability to lead high-level AI strategy

Cyber Security Engineer Tech Focus: Azure / Microsoft 365 / Purview / Defender / Sentinel Rate: Circa £500/day Inside IR35 Location: Fully Remote Duration: 6 Months This is a fantastic opportunity for a Cyber Security Engineer to join a small but growing Cloud/Azure team within a global organisation in the construction consultancy sector. The business has now fully moved into Azure Cloud and is looking to strengthen and mature its cyber security posture. You’ll be joining a highly skilled and well‑established security and cloud team that plays a crucial role within the organisation. As the Cyber Security Engineer, you will work exclusively within the Azure Cloud Security Stack. This is a hands‑on role covering both project work and BAU, giving you the chance to contribute to key security initiatives while also supporting day‑to‑day cyber operations. Responsibilities • Managing and improving the organisation’s cyber security posture, • Security remediation activities, • Incident Response, • Vulnerability Management, • Data Lost Prevention What We’re Looking For • Experienced Cyber Security Engineer with strong hands-on experience across Azure & Microsoft security technologies, • Practical experience with: Sentinel, Defender, Purview and Entra ID, • Ability to work independently, proactive and self‑starting, • Excellent communication skills and confidence engaging with both IT and business stakeholders If this sounds like you, please apply with an up‑to‑date CV and we’ll be in touch with more information.

Civil Engineer Permanent | Hybrid/Remote (UK) | Travel as Required An exciting opportunity for an experienced Civil Engineer to support the delivery of utility-scale solar and energy storage projects. This is a technically focused, collaborative role working across development, design, procurement, and construction teams to ensure civil works are delivered safely, efficiently, and in line with UK and international standards. You will take ownership of civil design coordination, support project delivery from concept to construction, and act as the technical interface between internal stakeholders and external engineering partners. Key Responsibilities • Produce and coordinate civil and structural designs compliant with relevant standards and CDM requirements, • Assess and define civil works scope including foundations, piling programmes, drainage, internal roads, and cut & fill analysis, • Review surveys and technical studies (geotechnical, hydrological, FRA, topographical) to inform design decisions, • Manage and review external engineering designs and reports, ensuring alignment with agreed specifications, • Provide technical support during construction, resolving engineering challenges and liaising with subcontractors, • Act as the main technical interface between internal departments, clients, and outsourced civil engineering partners About You • HNC/HND minimum; BSc/BEng or MSc in Civil or Structural Engineering preferred, • Experience within renewables, energy storage, DNO/ICP, consultancy, or related engineering environments, • Strong understanding of UK and international engineering standards and CDM regulations, • Proficient in AutoCAD (Tekla Tedds/Structural Designer advantageous), • Knowledge of drainage design, SuDS, and foundation design for mounting systems, substations, transformers, and BESS, • Structured, organised, and confident communicator with strong stakeholder management skills Desirable • Experience in Solar PV and utility-scale project development, • Familiarity with pile load testing and detailed foundation design, • Exposure to multi-jurisdiction projects and working across time zones, • Knowledge of Energy Storage Systems Why This Role This position offers the chance to work at the forefront of renewable infrastructure, contributing to decarbonisation through technically complex solar and storage projects. You will have the opportunity to influence design strategy, collaborate across multidisciplinary teams, and play a key role in delivering high-quality, construction-ready solutions. VIQU Energy Get in touch with VIQU Energy for a private discussion about this role. You can also contact Jordan Hyde directly through our website. Have someone in mind for this role? We offer rewards of up to £1,000 for successful introductions (T&Cs apply). To stay updated on the latest industry opportunities, follow @VIQU Energy on LinkedIn. Civil Engineer

Overhead Linesman (132kV–400kV Transmission Lines) Job Title: Overhead Cable Linesman (132kV–400kV Transmission Lines) Location: South England Contract duration: 3 months (May – August 2026) Salary: £350 – £400 per day About the role: We are seeking an experienced Overhead Linesman to support a refurbishment project on existing 132kV–400kV high voltage transmission lines across South England. The role focuses on the replacement of insulators and associated line hardware in accordance with National Grid standards and specifications. This position is suited to individuals with strong transmission experience who are comfortable working during line closures and isolations. Key Responsibilities: • Refurbish existing HV transmission lines (132kV–400kV), • Replace insulators, including downlead insulators, spacers, downlead spacers, and associated accessories, • Work safely and efficiently during line closures and isolations, • Carry out inspections and assessments to identify defects and refurbishment requirements, • Ensure all work is completed in line with National Grid standards and health & safety regulations, • Collaborate with the project team to achieve programme targets, • Accurately record work completed and report progress to site management Professional and Personal Attributes: • Qualified Overhead Linesman or equivalent transmission line experience, • Proven experience working on 132kV–400kV overhead transmission lines, • Strong background in insulator and line hardware replacement, • Good understanding of electrical safety rules and isolation procedures, • Ability to work at height and outdoors in varying weather conditions, • Strong safety-first mindset and attention to detail, • Reliable, self-motivated, and able to work effectively as part of a team, • Desirable: Time-served apprenticeship, Level 3 Power Industry Overhead Linesperson, ECS card, ERSU certification #OverheadLines #Linesman #TransmissionLines #132kV #400kV #NationalGrid #ContractWork #PowerIndustry #HV #Refurbishment #SouthEnglan

Key Responsibilities • Lead the design and development of integrated mechanical and electrical engineering systems. • Produce and review concept, detailed, and construction-level design documentation, including drawings, calculations, and specifications. • Provide technical leadership and mentorship to junior and mid-level engineers., • Coordinate with multidisciplinary teams, including architects, structural engineers, and project managers. • Conduct design reviews, risk assessments, and technical assurance activities., • Manage design interfaces between mechanical, electrical, and other engineering disciplines., • Provide engineering support during procurement, installation, commissioning, and testing phases. • Contribute to project planning, cost estimation, and technical proposals., • Ensure all engineering work complies with strict security and confidentiality requirements. Required Skills & Experience • 10+ years of experience in mechanical and electrical design engineering., • Degree in Mechanical Engineering, Electrical Engineering, Building Services Engineering, or related discipline. • Demonstrated experience delivering complex engineering designs for large-scale infrastructure or secure facilities. • Strong knowledge of HVAC, power distribution, lighting, and building services systems., • Proficiency in engineering design tools such as AutoCAD, Revit, or similar CAD/BIM software., • Experience leading technical design reviews and multidisciplinary coordination., • Strong analytical, problem-solving, and decision-making skills., • Excellent communication and stakeholder management abilities. Security Requirements • Must hold active SC or DV clearance, or be eligible to obtain clearance., • Ability to work on classified or sensitive government and defence projects., • Must comply with all security protocols and information assurance policies. Desirable Qualifications • Chartered Engineer (CEng) or working toward chartership through professional bodies such as the Institution of Mechanical Engineers or the Institution of Engineering and Technology. • Experience delivering projects within defence, nuclear, or high-security government environments. • Familiarity with Building Information Modelling (BIM) processes and digital engineering workflows.

Please note in regards to location this role can be based anywhere and travel will be required across England to our ATMS Safe houses Contract: This is a fixed term position until July 2027 with the possibility of extension Working hours: Minimum 35 hours per week Interview Date: Either enter the date or To be confirmed Are you passionate about creating safe, compliant environments that empower those most in need? The Salvation Army’s Anti-Trafficking & Modern Slavery Direct Delivery Department (ATMS DD) is seeking an experienced and committed Building Compliance & Assurance Lead to oversee health, safety, and contractual standards across our network of safe houses and outreach centres. In this pivotal role, you will: • Lead on all aspects of building compliance and assurance for 12 sites (10 safe houses and 2 outreach offices) across England, ensuring survivors and staff are housed and supported in secure, habitable, and dignified spaces., • Work closely with Service Managers, landlords (internal and external), and property colleagues to guarantee that all accommodation units meet statutory health and safety standards, contractual accommodation requirements, and repair timeframes., • Oversee the successful integration of Home Office contractual requirements with internal and third-party building services agreements, ensuring seamless service delivery and robust compliance with the Modern Slavery Victim Care Contract (MSVCC)., • Act as the operational bridge between the Direct Delivery team, TSA Property Department, Salvation Army Homes (SAH), and other stakeholders, strengthening relationships to improve frontline services., • Monitor, review, and report on compliance performance, proactively addressing risks and driving continuous improvement in building safety and quality standards. To be successful in the role you will have; • Strong experience of working successfully in a similar property/housing compliance role, in a demanding contractual/commissioned/regulated work environment, • Strong knowledge and experience of developing and implementing systems/processes to analyse, manage and report on property related compliance risks, • Strong working knowledge of UK housing standards and statutory property compliance, • Strong practical working knowledge of the standard building and maintenance works required for the operation of a varied property portfolio, to enable you to work in partnership with building specialists/contractors to facilitate the completion of works to agreed time, quality and budgetary targets, • NEBOSH General Certificate (or valid certified equivalent), • Full UK driving licence and ability and willingness to travel throughout the UK and Ireland Territory to visit sites/settings on a regular basis, • The ability and willingness to work within and be empathic with the Christian ethos and values of The Salvation Army Mission Join us and be part of a dedicated team making a tangible difference in the fight against modern slavery. Appointment will be subject to satisfactory references, a criminal record check (DBS:Enhanced Adult Workforce DBS Disclosure), Driving Licence, relevant qualifications and evidence of your Right to Work in the UK in line with Home Office requirements. As we are not a licensed sponsor, applicants must already have the right to work in the UK. Details on how to prove your Right to Work can be found ___. Please note that any Salvation Army employees who are under notice of redundancy and apply for this position will be given priority consideration. We reserve the right to close this advert earlier if we feel that we have received sufficient applications. Promoting equality in the workplace and as a disability confident leader scheme employer, we guarantee to interview all disabled applicants who meet all the minimum essential criteria for the vacancy.

Field Service Engineer Hours: Monday - Friday 45 hours per week + Overtime (Paid Door to Door) Company Vehicle + Fuel Card | Overtime | Allowances | Career Progression & Training Company Overview / The Role A leading UK engineering company is looking to expand its field engineering team. The role involves delivering planned and reactive engineering solutions across a wide range of mechanical and electrical depot systems. Due to continued growth, the company is seeking a hands-on Field Service Engineer to support maintenance activities across the Midlands, South and South-East regions. Key Responsibilities • Service, repair, install and maintain depot plant equipment including:, • Production machinery, • Motors, gearboxes & three-phase equipment, • Electrical control systems, • Carry out planned preventative maintenance (PPM) and reactive breakdown work, • Diagnose and fault-find on mechanical and electrical systems, • Complete accurate job reports and service documentation, • Work independently across multiple sites while representing the business professionally, • Support project-based installation work when required Location & Travel • Location: UK Wide (Typically Midlands & South), • Overnight stays typically 1–3 nights per week depending on project and location Salary / Overtime Rates • Up to £45,000 + overtime opportunities paid door to door, • 1.5x – Weekdays and Saturdays, • 2x – Sundays Benefits • Company van + fuel card, • £25 subsistence per night, • £10 stay-away bonus per night, • 26 days holiday + bank holidays, • Clear career progression pathway, • Ongoing technical training and development

Senior Maritime Engineer Hybrid | London Edinburgh Newcastle Liverpool Exeter Brighton Peterborough Southampton Bristol | £70k–£90k + comprehensive benefits Are you a seasoned civil or structural engineer who loves the smell of saltwater and the challenge of complex marine infrastructure? This role gives you the chance to shape major shipyard and port projects across the UK and overseas, working alongside some of the sharpest minds in the maritime space. The role You’ll take a leading role in the design and delivery of maritime civil structures for ports and shipyards, working with steel, concrete and timber in line with relevant international design standards. You’ll be involved from first sketch through to construction – and sometimes decommissioning and reuse – making sure solutions are technically robust, buildable and commercially sound. Key responsibilities include: • Leading design and analysis of quay walls, jetties, dry docks, floating docks, ship lifts and heavy-duty shipyard infrastructure., • Undertaking inspections and condition surveys of existing maritime structures and producing succinct technical reports., • Preparing and checking design calculations, 3D models and drawings before they go anywhere near a client or contractor., • Producing Bills of Quantities, specifications and contract documentation for maritime works., • Acting as Project Manager on small/medium projects or Technical Lead on larger, more complex multi-disciplinary schemes., • Providing day-to-day guidance and oversight to engineers, graduates, technicians and project support colleagues., • Presenting to clients and internal teams, clearly explaining engineering decisions and options in plain English. The environment You’ll be joining a well-established, employee-owned international consultancy that blends engineering, design and advisory services with digital tools and emerging technology. Their mission is to deliver infrastructure that genuinely improves how societies function, and maritime is a critical part of that. Highlights: • Large, highly respected maritime team delivering port and shipyard projects on multiple continents., • Strong track record in masterplanning, feasibility studies and detailed design for some of the world’s most complex ports., • Shipyard projects for commercial and defence clients run from a Southern UK “hub”, with frequent collaboration across the global business. What you’ll bring You’re an experienced civil/structural engineer who thrives on complex marine challenges and is comfortable taking ownership. You can see the bigger picture but are still obsessive about the details that keep infrastructure safe and serviceable. You will likely have: • Significant experience delivering shipyard and heavy marine infrastructure: heavy-duty quays, dry docks, floating docks, ship lifts or similar., • Strong track record taking designs from concept through to construction-ready stage., • Degree in Civil or Structural Engineering (BEng/BSc/MEng/MSc) and chartered or close to chartered with ICE or IStructE., • Solid background in the design of maritime structures and familiarity with relevant international standards and guidelines., • Confidence presenting to clients and stakeholders, and the ability to justify engineering decisions clearly in writing and verbally., • Experience mentoring or supervising junior engineers and supporting professional development (e.g. within ICE training schemes)., • A collaborative, approachable style – you can work across disciplines and build trust with clients as a technical advisor. What’s in it for you You’ll join a business that genuinely puts people first and gives senior engineers the freedom to shape their careers. On offer: • Competitive base salary, performance-related bonus and comprehensive benefits., • Clear pathways for progression into specialist technical leadership, project leadership or people management – or a blend of all three., • Flexible working options, including hybrid and part-time patterns to suit your life outside work., • Support for professional development and chartership, plus opportunities to work on flagship international projects., • A culture that values work-life balance, autonomy and doing the right thing for clients and the wider community. How to apply If you’re a senior maritime structural/civil engineer ready to take a leading role on high-impact shipyard and port projects, apply with your CV and a short note on your most relevant project experience. Shortlisted candidates will be contacted to discuss the role, team and projects in more detail.

Graduate ASIC Verification Engineer Cambridge or remote within the UK Must have internship or placement experience and be based in the UK. An innovative UK fabless semiconductor company developing next-generation secure microcontroller technology for safety-critical embedded systems. Built on advanced capability-based architecture research, the company is already collaborating with several of the world’s leading technology organisations. I am looking for a talented Graduate ASIC Verification Engineer to join a growing verification team. You will work alongside experienced engineers to ensure the functional correctness and quality of complex digital designs used in next-generation semiconductor products. This role is suited to graduates with strong digital design and verification knowledge, excellent academic performance, and relevant industry experience through internships or placements. Key Responsibilities • Develop and maintain verification environments for digital and ASIC designs, • Write SystemVerilog/UVM testbenches to verify RTL functionality, • Create directed and constrained-random tests, • Run simulations, analyse results, and debug failures, • Contribute to coverage-driven verification strategies, • Work closely with design engineers to resolve functional bugs, • Participate in design and verification reviews, • Document verification plans, test results, and coverage metrics Required Qualifications • Bachelor’s or Master’s degree in Electronic Engineering, Electrical Engineering, Computer Engineering, or a related discipline, • First Class or Upper Second Class (2:1) degree from a top engineering university, • Minimum 12 months of relevant internship or industrial placement experience, • Strong understanding of digital logic design and computer architecture, • Knowledge of HDL languages (SystemVerilog, Verilog, or VHDL), • Strong analytical and problem-solving skills, • Good written and verbal communication skills Desirable Skills • Experience with SystemVerilog verification and UVM – through internship, • Exposure to coverage-driven verification methodologies, • Familiarity with EDA tools (Synopsys VCS, Cadence Xcelium, Siemens Questa), • Knowledge of Python, Tcl, or scripting for verification automation, • Understanding of ASIC design flows, • Enthusiasm for semiconductor design and verification On offer is the rare opportunity to work for a British company and remotely, mentorship from experienced ASIC engineers and the opportunity to work on advanced semiconductor projects. You will be entitled to a base salary and company stock options. For more information please contact Rachel Mason at IC Resources

Role: Commissioning Engineer (Distribution Networks) Location: Covering projects across Hertfordshire and the wider East of England region. Turner Lovell are recruiting for experienced Commissioning Engineers to join a leading EPC Contractor. This role sits within a Distribution & Connections team supporting electrical infrastructure projects. You’ll work on substation builds across 11kV, 33kV and 132kV networks, helping ensure safe and reliable integration of new equipment into the live system. Key Responsibilities: • Carry out testing and commissioning of high‑voltage plant and associated protection systems., • Produce commissioning plans and ensure all activities meet current standards and legislation., • Attend client meetings, offer technical input, and help resolve design or installation issues on site., • Review and update technical drawings and documentation., • Promote safe working practices and support colleagues through guidance and mentorship. Requirements: • Qualification at HNC/Degree level in Electrical Engineering., • Proven experience in HV testing and commissioning within distribution networks., • Strong understanding of engineering procedures, regulatory requirements, and safety standards., • Confident decision‑making skills with the ability to improve processes., • Effective communication and teamwork skills, working with clients, designers and site teams., • Knowledge of Health, Safety and Environmental regulations., • Full UK driving licence and willingness to travel to various sites. A great opportunity to join a leading player in electricity transmission and work on high‑impact projects. If this sounds like your next challenge, please apply or contact Yana Arif at / 0207 448 1100.

We are seeking an experienced Lead Engineer – Drive System Specialist to take ownership of engineering activities across complex projects. Key Responsibilities • Lead and manage engineering activities across projects, ensuring compliance with client expectations, legal requirements, and industry standards., • Take full ownership of the Functional Safety lifecycle within projects., • Supervise, guide, and motivate teams of engineers, including external contractors, ensuring high-quality deliverables., • Mentor apprentices, trainees, junior, and graduate engineers to foster professional development., • Collaborate closely with Project Managers to deliver projects on time and within budget, proactively identifying and mitigating technical risks., • Participate in the Engineering Management Working Group, contributing to the development of internal standards and continuous improvement initiatives., • Develop electrical and controls concept designs, including Functional Design Specifications, Safety Requirements Specifications, Single Line Diagrams, Network Topologies, Device Layouts, Cause & Effect Matrices, and Safety Block Diagrams., • Produce software design specifications and develop software/configuration deliverables for PLCs, HMI, SCADA, robots, drives, BMS, and related systems., • Lead Factory Acceptance Testing (FAT), Commissioning, and Site Acceptance Testing (SAT)., • Maintain and own the Technical Construction File., • Undertake other duties as required to support project and business objectives.

Commissioning Manager International | Permanent About the Opportunity An established and growing engineering organisation delivering complex building services solutions across international projects is seeking an experienced Commissioning Manager to lead commissioning activities on technically demanding programmes. Operating across mission-critical and industrial environments, this role is central to ensuring the successful delivery of HVAC, water and air systems within highly regulated project environments. You will play a pivotal part in driving quality, compliance and performance from installation through to final handover. This is a globally focused position. While candidates can be based anywhere, there is a requirement for regular international travel to support live project sites. The Role As Commissioning Manager, you will take ownership of the commissioning lifecycle across multiple projects, ensuring systems are delivered safely, efficiently and in line with client and regulatory expectations. Key responsibilities include: • Lead and manage commissioning activities for HVAC, water and air systems., • Develop and implement commissioning plans, procedures and schedules., • Coordinate with design, construction and project management teams to ensure seamless system integration., • Oversee pre-commissioning, functional testing and performance validation., • Manage specialist subcontractors and commissioning engineers on site., • Ensure compliance with relevant industry standards, client specifications and local regulations., • Review technical documentation, drawings and method statements., • Identify and mitigate commissioning risks across international project environments., • Support client witnessing, troubleshooting and final system handover., • Provide technical leadership and mentoring to commissioning teams. About You You are a technically strong commissioning professional with experience operating in complex engineering environments. Essential requirements: • Proven experience as a Commissioning Manager or Senior Commissioning Engineer., • Strong technical knowledge of HVAC systems, water systems and air handling systems., • Experience working on large-scale, technically complex projects (e.g. industrial, mission-critical, process or infrastructure environments)., • Demonstrated ability to manage commissioning programmes across multiple international sites., • Strong understanding of mechanical building services and system integration., • Experience coordinating multidisciplinary teams and specialist subcontractors., • Excellent communication skills and ability to interface directly with clients., • Background in highly regulated or mission-critical environments., • Familiarity with international commissioning standards and compliance requirements. Why Apply? • Opportunity to work on technically challenging international projects., • High level of autonomy and responsibility., • Exposure to complex HVAC and process-driven environments., • Clear impact on project performance and client satisfaction., • International travel and cross-border project experience. Apply Now If you are an experienced Commissioning Manager with strong HVAC, water and air systems expertise and are open to international travel, we would like to hear from you. Submit your CV via LinkedIn to express your interest. All applications will be treated with strict confidence.

Coastal Engineer Help Shape the Future of Coastal Erosion Protection England | Remote with Travel | Full-Time Are you a coastal or marine engineer looking for something different, something with real impact? Join a specialist team bringing a new alternative solution to the UK’s coastal erosion challenges. If you want meaningful work, technical problem‑solving, and the chance to shape how the UK protects its coastlines, this is the perfect next step. A Role with Real Purpose : • Help safeguard communities, infrastructure, and coastlines across the UK., • Strong European‑style working culture, respectful environment, and positive collaboration are core strengths., • An alternative solution to coastal erosion is entering the UK market., • Varied, hands‑on engineering, from site visits to technical input to solution design, every day brings new challenges., • Autonomy & flexibility, enjoy independence, trust, and the space to manage your own schedule. Tasks will include: • Working directly with consultants, contractors, and asset owners to support coastal erosion projects., • Providing technical insight, engineering judgement, and site‑based understanding of coastal environments., • Visiting project locations and offering practical guidance on installation, design, and implementation., • Preparing solution proposals, calculations, and technical support documents., • Attending industry events, CPDs, conferences, and site meetings., • Contributing to a passionate UK team aiming to transform how coastal protection is delivered. Requirements: Experience in coastal, marine, hydraulic, or water‑sector engineering. You’ll thrive here if you: • Have experience in coastal, marine, water, or civil engineering environments., • Enjoy practical, real‑world engineering as much as technical solutions., • Communicate confidently with a range of stakeholders. To apply for this position, please call Stuart Hensman on +44 (0)2392 228231 or email your CV ARM Maritime; Recruitment Specialists.

Operational Electrical Engineer – Renewable Energy 📍 Location: Remote (UK) 📄 Contract: 6 Months (Potential Extension) 🏢 Recruiter: Spencer Ogden Spencer Ogden is supporting a leading renewable energy operator in the search for an Operational Electrical Engineer to join their central engineering team on a 6-month contract basis with potential for extension. This role plays a key part in ensuring operational renewable assets achieve maximum performance, reliability, and value through strong technical governance and engineering support. The successful candidate will work across the full asset lifecycle including operations, development, construction, R&D, and asset improvement projects. Role Overview The Operational Electrical Engineer will provide specialist electrical engineering expertise to support operational renewable assets, ensuring high standards of safety, performance, and reliability. Working closely with Asset Managers, Engineering teams, and external contractors, you will investigate technical issues, support asset optimisation initiatives, and contribute to long-term engineering strategy across the portfolio. This position will also support new project development through technical due diligence and engineering standards development. Key Responsibilities • Champion a zero-harm safety culture and ensure compliance with all health and safety requirements., • Provide electrical engineering technical support to asset management teams on issues impacting asset performance., • Assist in developing and implementing long-term maintenance strategies for renewable assets., • Lead or support investigations into fleet-wide electrical technical issues and engineering risks., • Conduct site inspections relating to technical issues, asset modifications, and engineering improvements when required., • Prepare technical reports and recommendations for operational engineering programmes., • Support technical incident investigations and non-conformance management., • Identify issues affecting asset availability and generation and recommend engineering solutions., • Assist in managing the engineering risk register and implementing mitigation strategies., • Support contingency planning for major unplanned asset events., • Contribute to strategic spares strategies across operational assets., • Review and technically assess engineering modifications through change management processes., • Support implementation of technical trials and asset improvement programmes., • Conduct technical due diligence and field quality assurance on new renewable energy projects., • Support the development of engineering standards and operational procedures., • Interface with contractors and specialist engineering partners to resolve technical issues. Qualifications • HNC in Electrical Engineering (or working towards an Electrical Engineering degree), • Experience as an Operational Electrical Engineer or similar role, • Strong technical experience within renewable energy, power generation, utilities, or a similar industry, • Proven experience managing technical investigations, engineering issues, or improvement projects, • Strong knowledge of electrical power systems and engineering practices, • Ability to analyse complex engineering problems and present clear technical recommendations, • Excellent communication and stakeholder management skills, • Strong analytical and problem-solving ability, • Ability to work effectively across multidisciplinary teams, • Remote role with occasional site visits as required

Role: Project Engineering Director – HVDC Cables Location: UK & Germany (Hybrid) Role Overview The Project Engineering Director – HVDC Cables provides senior technical leadership for the execution of large-scale HVDC cable system projects (submarine and land), from tender through commissioning. The role ensures safe, compliant, and profitable delivery of complex EPC/EPCI projects while serving as the highest engineering authority within the project organization. Key Responsibilities Engineering Leadership • Lead all engineering activities for HVDC cable systems (±320kV to ±525kV+)., • Govern design reviews, technical risk management, and engineering quality., • Act as final technical decision authority on assigned projects. Project Delivery • Oversee cable system design (XLPE/MI), accessories, route engineering, and installation engineering., • Ensure compliance with contractual and regulatory requirements., • Manage technical interfaces with converter OEMs such as Hitachi Energy, Siemens Energy, and GE Vernova. Tender & System Integration • Support bid development with optimized, risk-balanced technical solutions., • Lead system integration and interface management across converter stations, offshore platforms, and civil works. Manufacturing & Testing • Align engineering with manufacturing capability and qualification testing programs (type tests, PQT, FAT). Client Engagement • Serve as senior technical representative to utilities, TSOs, and developers., • Support executive-level technical discussions and dispute resolution. Qualifications • Master’s degree in Electrical Engineering or equivalent., • 15+ years in HV/EHV/HVDC cable systems., • Proven leadership in large (>€500M) HVDC projects., • Deep expertise in HVDC cable design, thermal rating, insulation coordination, and offshore installation.

Role Summary We’re looking for a practical, electrically focused Engineering Technician to support the assembly, installation, and operation of a wide range of technical equipment used in testing and development work. The role involves hands‑on workshop activity, field deployments, and working with engineers to prepare, run, and maintain equipment at different sites. This position suits someone who enjoys varied work, travel, and being involved directly in building and operating equipment rather than sitting at a desk. Key Responsibilities Equipment Build & Electrical Work • Assemble electrical systems, control panels, and instrumentation according to drawings and guidance., • Install wiring, sensors, actuators, protection devices, and three‑phase power equipment., • Support integration of electrical and mechanical components into complete test setups., • Carry out routine checks, troubleshooting, and repairs during development and testing. Field Operations & Testing • Assist in transporting equipment to sites in the UK and abroad., • Set up and commission systems for trials under supervision from engineering staff., • Operate equipment during test periods and record observations or data as required., • Make on‑site adjustments, replacements, or minor modifications where needed. Workshop Tasks • Fabricate and assemble brackets, mounts, enclosures, and simple structures., • Use common workshop tools for cutting, drilling, grinding, and basic machining tasks., • Help maintain workshop organisation, tool control, and parts inventory., • Prepare equipment for deployment, ensuring all components are ready and safe to use. About You You’ll be well suited to this role if you: • Have strong hands‑on experience with electrical work or mixed‑discipline technician tasks., • Can follow wiring diagrams, schematics, and assembly instructions confidently., • Are comfortable travelling frequently and working at different types of sites., • Are practical, safety‑minded, organised, and able to solve problems proactively., • Can work independently while staying aligned with engineering plans and priorities.

ABOUT US ___, part of Capgemini, tackles the hardest work in data for the world’s largest organizations. We combine intelligent software with deep data expertise to help the Fortune2000 tackle complex data challenges and drive measurable business outcomes with business-ready data. Syniti’s Data First strategy transforms data from an afterthought into a strategic asset—unlocking insights, reducing risk, and fueling growth. With over 5,000 successful projects, we support the full data lifecycle through a unified platform for migration, quality, replication, matching, master data management, analytics, governance, and strategy. Operating globally across industries, Syniti’s award-winning software, expert consultants give enterprises a unique edge in managing and maximizing their data. Syniti’s cloud-native platform sets new standards in enterprise data management, combining powerful SaaS solutions with deep domain expertise. Designed for agility and scale, our technology helps customers accelerate digital transformation, drive innovation, and make confident decisions with trusted data. Every product enhancement is built to solve real business challenges—empowering organizations to unlock value from their data faster and more effectively. THE ROLE We are seeking a Principal Cloud Network Security Architect with a strong background in SaaS cloud operations, AWS networking and security, and regulatory compliance. This role will be instrumental in designing and securing our cloud network infrastructure while aligning security strategies across teams. The ideal candidate is a technical leader, well-spoken, and experienced in pre-sales discussions with customers on networking and security topics. WHAT YOU WILL DO • Cloud Network and Security Architecture: Design, implement, and optimize secure, scalable network architectures in AWS for a high-performance SaaS environment., • Private Cloud and On-Prem Network and Security: Work with customers to resolve complex communication challenges across heterogeneous networks with technology issues related to networking, routing, VPN and Layer 4-7 security filtering at variousappliances in a customer’s topology, • Regulatory Compliance Leadership: Ensure security controls align with SOC 2, NIST 800-53, FedRAMP, and other regulatory frameworks., • Advanced Security Technologies: Deploy and manage PAM (Privileged Access Management), NGFW (Next-Generation Firewalls), WAF (Web Application Firewalls), IPS (Intrusion Prevention Systems), and other security technologies to protect the cloud infrastructure., • Cross-Team Collaboration: Work across teams—including DevOps, Compliance, and Product—to drive security best practices and new processes in a way that aligns with all stakeholders., • Pre-Sales Security Consultation: Engage with customers to explain security architecture, best practices, and risk management strategies during sales and onboarding discussions., • Security Process Development: Define and refine security operations, incident response, and infrastructure-as-code security automation strategies. WHAT IT TAKES • 14+ years of experience in networking and security, with strong AWS security expertise., • SaaS cloud operations experience, managing security and compliance at scale., • 8+ years of network security technologies (PAM, NGFW, WAF, IPS, SIEM, etc.)., • 6+ years of Deep knowledge in AWS networking (VPC, Transit Gateway, Direct Connect, Route 53, Global Accelerator) and security services (Security Hub, GuardDuty, Macie, AWS WAF, Shield, IAM, etc.)., • 5+ years of expertise in leading the implementation and management of regulatory and compliance frameworks (SOC 2, NIST 800-53, FedRAMP, ISO 27001)., • 5+ years of Linux administration, • Proven ability to develop processes, drive adoption of new security strategies, and align security initiatives across teams., • Strong communication skills with the ability to engage with technical and non-technical stakeholders, including executives and customers., • Pre-sales experience in security discussions with customers is highly desirable., • Certifications: AWS Certified Security – Specialty, CISSP, CCSP, or equivalent preferred. Be Curious - Be a lifelong learner. Seek out new ideas to serve customers. Understand our competition and the world. Be permanently dissatisfied with the status quo. Challenge preconceptions. Focus on the future rather than yesterday. Take Action - Be the first. Don’t wait. Take accountability. Inspire others by doing. Fail fast and learn from mistakes. Make a difference every day. Stronger Together - Respect, trust, and look out for each other. Celebrate diverse perspectives. Listen. Build connections and belonging. Act with integrity. Give back. One Syniti family. WHAT WE OFFER • Trust in your talent. At Syniti you will find a supportive environment and access to learning tools, but micromanagement is not our style., • Growth. We are growing rapidly and steadily solving the biggest challenges enterprise companies are faced with today. There was never a better time to join and grow with us. Most importantly you will have the chance to shape our journey and share in our success story., • Support. We all rely on each other and enable each other to be successful. You won’t stand alone., • Curiosity and genuine interest in you. We all have our different stories, all equally fascinating with each depicting a different journey and we want to hear them all., • Recognition. We are the sum of individual achievements, and we always take the time to celebrate them., • An open organisation. Titles don’t define access at Syniti. We stay humble regardless of where we sit in the organisation. We want to hear every voice, listen to all the ideas and make sure everyone’s work is seen and valued. OUR COMMITMENT TO INCLUSION At Syniti, we’re committed to creating a respectful, inclusive, and fair workplace where everyone belongs and thrives. We believe that diverse perspectives make us stronger — and we value the unique backgrounds, experiences, and voices each person brings to our team. We welcome applicants based on their skills and potential, and we’re dedicated to ensuring equal opportunities for all, regardless of personal background. If you need accommodations during the hiring process, please let us know — we’re here to support you.

About Apexon: Apexon is a digital-first technology services firm specializing in accelerating business transformation and delivering human-centric digital experiences. We have been meeting customers wherever they are in the digital lifecycle and helping them outperform their competition through speed and innovation. Apexon brings together distinct core competencies – in AI, analytics, app development, cloud, commerce, CX, data, DevOps, IoT, mobile, quality engineering and UX, and our deep expertise in BFSI, healthcare, and life sciences – to help businesses capitalize on the unlimited opportunities digital offers. Our reputation is built on a comprehensive suite of engineering services, a dedication to solving clients’ toughest technology problems, and a commitment to continuous improvement. Backed by Goldman Sachs Asset Management and Everstone Capital, Apexon now has a global presence. Role Overview We are looking for a highly skilled Senior QA Automation Engineer to join a high-performing engineering team responsible for building and maintaining critical financial platforms. The role focuses on designing robust automation frameworks, ensuring system reliability, and enabling high-quality software delivery through advanced testing practices. The ideal candidate will have strong expertise in Playwright, JavaScript/TypeScript, and API automation, along with experience testing distributed systems and microservices-based architectures. You will work closely with engineering, product, and DevOps teams to embed quality across the entire software development lifecycle while driving improvements in test automation, performance testing, and AI-augmented testing strategies. Key Responsibilities Automation Framework Development • Design, build, and maintain scalable end-to-end automation frameworks using Playwright with JavaScript/TypeScript., • Develop reusable automation libraries and testing utilities to improve efficiency and maintainability., • Ensure high automation coverage across UI, API, and integration layers. API and Integration Testing • Develop and maintain automated tests for RESTful APIs, GraphQL services, and distributed microservices., • Validate service contracts, data integrity, and system interactions across complex integrations., • Utilize tools such as Postman, SuperTest, or Playwright API testing for automated validation. Performance and Reliability Testing • Conduct load, stress, and scalability testing to ensure system stability during high transaction volumes., • Use tools such as Apache JMeter, k6, or similar frameworks to identify performance bottlenecks and optimize system throughput., • Collaborate with engineering teams to analyze results and drive performance improvements. Domain-Focused Test Design • Develop realistic end-to-end test scenarios based on financial workflows such as payments, account management, KYC processes, and ledger systems., • Ensure systems meet high standards for accuracy, resilience, and regulatory compliance. AI-Driven Testing Innovation • Evaluate and implement AI-augmented testing techniques to improve test coverage and reduce maintenance overhead., • Leverage AI tools for test case generation, synthetic data creation, visual regression testing, and intelligent defect detection. CI/CD and DevOps Integration • Integrate automated testing frameworks into CI/CD pipelines using tools such as Jenkins, GitHub Actions, or GitLab CI., • Ensure automated tests run reliably as part of continuous integration and deployment workflows., • Contribute to improving quality gates, test reporting, and release confidence. Required Skills and Experience • Strong hands-on experience with Playwright and JavaScript/Node.js or TypeScript for automation development., • Proven experience testing REST APIs, GraphQL services, and microservice-based systems., • Experience with API testing tools such as Postman or SuperTest and strong understanding of JSON schema validation., • Hands-on experience with performance testing tools such as Apache JMeter, k6, or similar frameworks., • Strong understanding of automation design patterns and scalable test architecture., • Experience working in Agile environments with knowledge of TDD, BDD, and modern QA practices., • Experience integrating automated tests into CI/CD pipelines and DevOps workflows., • Prior experience working within Banking, FinTech, or other highly regulated environments is strongly preferred.

Dynamics NAV/D365 BC Functional Consultant, £75,000 Pearson Carter are currently working with one of the biggest Microsoft Dynamics Gold Partners in the UK They are looking to increase their team due to the rapid growth of the company and growth of their projects. They are looking for an experienced consultant with NAV/Dynamics 365 Business Central experience. They offer an excellent salary of up to £75K depending on experience + benefits + opportunities for progression + training! Get in touch if you’re looking for your next opportunity! Responsibilities: • Deliver end to end D365 Business Central project implementations., • Show expertise and work within Finance, Sales, HR, Inventory and Procurement modules., • Gather requirements and finalise deliverables. Experience: • Must have Dynamics NAV/Dynamics 365 Business Central., • Experience and knowledge about ERP (NAV/BC) implementation methodologies., • Strong project management skills., • NAV/D365 BC Certifications are preferred. Salary They offer an excellent salary package of up to £75,000, depending on experience! + Benefits. Location The Microsoft Dynamics NAV / D365 client has an office in the London – this is a remote role. Applications are welcome from professionals with Dynamics NAV/Dynamics 365 Business Central experience. How to Apply Please apply asap with your CV to be considered for this position. You can also get in touch with me on or 0191 406 6111.

About Quantiphi: Quantiphi is an award-winning, AI-First digital engineering and consulting company focused on delivering high-impact Services and Solutions that help organizations solve what truly matters. We partner with enterprises to reimagine their businesses through intelligent, scalable, and transformative AI—driving measurable outcomes at the very core of their operations. Since our founding in 2013, Quantiphi has tackled some of the world’s most complex business challenges by combining deep industry expertise, disciplined cloud and data engineering practices, and cutting-edge applied AI research. Our work is rooted in delivering accelerated, quantifiable business value—not just technology for technology’s sake. Headquartered in Boston, Quantiphi is a global organization with 4,000+ professionals serving clients across key industry verticals, including BFSI, Healthcare & Life Sciences, CPG, MFG, TME etc. As an Elite and Premier partner to leading cloud and AI platforms such as NVIDIA, Google Cloud, AWS, and Snowflake, we build and deliver enterprise-grade AI services and solutions that create real-world impact. Role: Engagement Manager - CCAI Experience Level: 7+ years Location: Remote (UK) Role Summary: To maximize the ROI of our high-value engineering talent, we require a Technical Program Manager to operate in a high-intensity delivery environment. You will act as a force multiplier, removing logistical friction (travel, access rights, scheduling) to ensure our FDEs remain 100% focused on coding and customer delivery. You will bridge the gap between field challenges and core engineering requirements. Example of Work Required: • Triage issue reports from customers, identify likely root causes, and identify owners on Google/customer team to continue investigation., • Build organization around issues/feature requests, manage ETAs for fixes and improvements for Google-owned issues. Key Responsibilities: • Issue Triage & Root Cause Analysis: Triage issue reports from customers, identify likely root causes, and assign owners within Google or customer teams. Build organization around issues/feature requests and manage ETAs for fixes., • Operationalizing Scale: Enforce strict "train-the-trainer" certification milestones and cohort velocity to scale the team from 8 to 24+ FTEs, preventing quality dilution during rapid expansion., • Systematizing Product Feedback: Transform isolated field challenges into prioritized engineering requirements. Aggregate distributed data on ADK/NGA edge cases to drive roadmap evolution., • Logistical Friction Removal: Remediate transparency of work vertically and horizontally, ensuring FDEs are not bogged down by the logistical friction of handling customer messaging. Core Competencies: • Technical Fluency: "Code comfortable" with the ability to read Python and understand NGA app architecture., • Operational Rigor: Ability to manage high-velocity scaling (1:3 ratio governance)., • Strategic Communication: Centralizing messaging to maintain alignment between Google Engineering and the customer. Minimum Qualifications: • Technical Understanding: Ability to read Python and understand complex software architectures., • Infrastructure Knowledge: Professional-level certification in Google Cloud Infrastructure., • Agent Experience: Understanding of LLM agents, including prompt engineering and core ADK/NGA concepts (instructions, callbacks, tools). Preferred Qualifications: • Leadership Experience: Experience operating at an L7+ level equivalent to shape the practice and make staffing adjustments., • Hands-on Background: Previous hands-on delivery experience, preferably in an FDE-type role, to better understand the technical nuances of the program. What is in it for you: • Be part of the fastest-growing AI-first digital transformation and engineering company in the world., • Be a leader of an energetic team of highly dynamic and talented individuals., • Exposure to working with fortune 500 companies and innovative market disruptors., • Exposure to the latest technologies related to artificial intelligence and machine learning, data and cloud.

About the Role Our client is a fast-growing company building a platform that enables enterprises to manage and scale Kubernetes, cloud infrastructure, and AI/ML workloads across hybrid and multi-cloud environments. They are seeking a Senior Pre-Sales Solutions Architect to work closely with enterprise customers and internal teams to design and implement modern infrastructure platforms supporting cloud-native and AI workloads. This is a customer-facing technical role where you will partner with sales, product, and engineering teams to help organizations adopt and scale modern infrastructure platforms. You will engage with technical leaders including Developers, DevOps Engineers, SREs, Platform Engineers, and Architects, while also working with business stakeholders to demonstrate business and technical value. The role sits at the intersection of cloud infrastructure, on-prem environments, Kubernetes, automation, and AI infrastructure. Responsibilities • Partner with account executives to help customers understand the value of a modern infrastructure orchestration platform., • Lead discovery sessions with customer DevOps, SRE, and platform teams to identify challenges, use cases, and desired outcomes., • Design architectures and implementation plans to automate infrastructure provisioning, governance, and AI/ML workload orchestration., • Deliver technical presentations, demonstrations, and proof-of-value engagements., • Address technical objections and collaborate with product and engineering teams to design effective solutions., • Act as a trusted technical advisor to prospective customers during the evaluation process., • Provide guidance and troubleshooting support across complex infrastructure environments., • Advocate for customers internally by translating requirements into product feedback., • Represent the company at industry events, webinars, and technical conferences., • Travel to customer sites and industry events when required (up to ~35%). Required Experience • Kubernetes, • Containers, • Infrastructure automation, • Hybrid and multi-cloud environments (AWS, GCP, Azure, on-prem), • Ability to clearly communicate complex technical concepts to both technical and non-technical audiences., • Experience supporting the full pre-sales lifecycle, from discovery through technical validation and close., • Background in software engineering, DevOps, platform engineering, or systems architecture., • Strong presentation, communication, and stakeholder management skills. Preferred Experience • Experience with AI/ML infrastructure and GPU-accelerated computing., • Familiarity with AI/ML frameworks such as TensorFlow or PyTorch., • Knowledge of CNCF ecosystem technologies., • Relevant certifications such as:, • Certified Kubernetes Administrator (CKA), • AWS Solutions Architect or similar, • Ability to quickly understand emerging technologies and articulate their value to enterprise customers.

Better places, thriving communities. Main Purpose of Role The Civil Tendering Engineer be responsible for developing proposals for major electrical works including 11/33/132kV projects spanning BESS, Solar Parks, Data Centres I&C etc up to £15m+. Working in close partnership with key stakeholders to include Electrical Tendering Engineers, Business Development, Design Engineers and Project Managers. The Civil Tendering Engineer ensures the successful delivery of proposals to both new and existing customers. These sectors are a key area of growth for ESM Power, and we are looking for an experienced. Civil Tendering Engineer to join our growing and successful team. Key Duties and Responsibilities · Assessment of bid opportunities leading to agreed bid / no-bid review including assessing key projects and client criteria. · Assess and evaluate any risks and potential problems. · Responsible for checking the accuracy and completeness of client's tender documents. · Evaluations of options and alternatives · Assist in the technical and estimating element of preparation of tender and quotations from specification and drawings within defined time periods – In conjunction with Procurements, liaise with Sub-contractors and supplies to obtain the best available quotations. · Review tender documentation and assess a project technically and being responsible for the overall estimate of cost based upon client specification and technical requirements. · Produce formal handover documentation on accepted work. Attend handover meetings where required and explain project scope, estimate, clarifications and assumptions. · Completion of all company procedure documents and financial information including database and tendering diary. · Assist with client meetings to provide technical support. · Ensure a consistent approach for the production of proposals. · Ensure monthly and weekly management reports are generated as required. · Build and maintain tender database. · Assist with the correct closure of projects including lessons learnt. · To work alongside members of the Bid team in review of contract T&C's ensuring suitable terms are referenced on all quotations. · To perform all duties in line with the Company's HSQE Policies and Procedures Job Context/ Key Challenges · To work to challenging deadlines on providing estimates for approval. · To manage interface with Business Development roles and ensure conflicting priorities are satisfactorily resolved. Cross functional working with the project managers / design engineers when handing over new projects and reviewing variations. Dimensions: · Approval of estimates up to £50m. · The Senior Civil Tendering Engineer role will be fully accountable to the Head of Tendering. Qualifications and Experience • The person carrying out this role is likely to be a highly mobile, motivated, and experienced with a proven track record of supporting teams in a demanding customer focused environment. The ability to work under pressure and achieve challenging deadlines is essential., • Excellent communicator at all levels with the ability to build good working relationships both within ESM Power and with external customers., • Preference to hold HNC/HND or similar in Civil Engineering, or other industry role qualification which proves knowledge applicable to this role (e.g. Quantity Surveyor, Project Management), • Experience within the Electrical DNO sector and non-regulated sectors. Or experience in estimating and commercial from civil contractors., • Experienced Estimator / Engineer with a proven track record in providing technical solutions and costing for an electrical and civil engineering environment., • Knowledge of LV to EHV installations, substations and switchgear, • Experience up to and including 132kV. In addition, you will need to demonstrate. • Good knowledge of Microsoft Office, Outlook, Word, Excel., • Good written, verbal and presentation skills., • Self-motivated, enthusiastic and able to motivate staff to meet tight deadlines., • Well organised, tidy worker with good work presentation skills Personal Characteristics • Supportive team player with the ability to positively interact with both technical and commercially orientated staff, possibly outside own area of expertise., • Strong organisational and work management skills., • Excellent influencing and communication skills coupled with the ability to engage with staff at all levels in the organisation., • Versatile, adaptable, willing to learn and impart skills on to others., • Be able to demonstrate impeccable ethical and moral behaviour, coupled with unquestionable integrity and character. Our market-leading offering provides you with benefits that suit your lifestyle. We have a virtual GP on hand for you and members of your household. So you can get expert advice by video or phone without having to leave your home. We offer financial wellbeing assistance through our Salary Finance scheme. For example, you could access 50% of your earned pay before payday for a small fee. Salary Finance also offers competitive loans. When you join us, we’ll give you a link to our flexible lifestyle benefits platform, Choices. You might choose to purchase up to five extra days’ holiday each year. You might buy critical illness insurance, seek dental treatment or buy technology products at an affordable cost. There are many choices! We give you access to high street discounts from thousands of well-known retailers, gyms and more through our MiDeals platform. And we have a cycle-to-work scheme. Life cover of up to four times your salary is available. We also offer enhanced pension contributions, a save-as-you-earn scheme, and a Mitie Matching Share Plan (you could even be awarded free shares in Mitie). We award our employees with Mitie Stars as recognition for their hard work. There are cash prizes up for grabs each month and at the end of the year there’s a chance to scoop a top prize of £10,000! Our success is a direct result of the experience and quality of our people. Progressing your career is therefore a top priority for us. We offer a diverse variety of training and development avenues via a wide selection of learning resources to suit you. Since 1987, Mitie’s 80,000 employees have been maintaining companies globally. We are the UK’s leading facilities management and professional services company, and our clients range from household names in banking, critical government sites as well as hospitals and schools. Join our Mitie Team. Together our diversity makes us stronger.

Senior Flight Control Engineer 📍 United Kingdom (Hybrid) | Full-time, Permanent About the Company Pioneering UAV and autonomous logistics company transforming how critical goods are delivered. They design, build, and operate end-to-end drone systems, combining hardware, software, and regulatory expertise to deliver real-world impact across healthcare, energy, and industrial logistics. Engineers at the company work on operational aircraft, tackling complex flight control and safety challenges while contributing to faster, more sustainable deliveries. With a collaborative, expert team and clear growth opportunities, it is a place where your work directly shapes the future of autonomous aviation. Why This Role Matters You will be the authority on flight control and safety for operational UAVs. Using Pixhawk (Cube Orange) and ArduPilot, you will ensure aircraft fly predictably, repeatably, and defensibly. You will maintain estimator health, tune controllers, and produce flight-test-backed safety evidence that supports regulatory approvals. Your work directly enables drones to operate beyond visual line of sight in critical missions that save time, money, and lives. What You Will Do • Own the configuration, tuning, and validation of Pixhawk and ArduPilot systems, • Plan and carry out disciplined flight tests across normal and failure scenarios, • Analyse flight logs to produce regulator-ready safety evidence, • Act as the flight control authority, mentoring engineers and preventing unsafe changes, • Work closely with airframe, autonomy, software, and operations teams to ensure aircraft performs safely and predictably Why It Is Exciting • Work on operational UAVs delivering critical services across healthcare, energy, and logistics, • Take full ownership of flight control and safety in a company that is scaling fast, • Shape the future of autonomous aircraft operations, with a clear path to Flight Control Lead, • Competitive salary, equity, pension, and training budget provided Who You Are • Five or more years in UAV flight control or GNC, hands-on with Pixhawk and ArduPilot, • Strong understanding of flight dynamics, control theory, and estimator or flight-test analysis, • Experienced in regulated safety processes and producing evidence-backed flight decisions, • BVLOS, redundancy management, or SITL/HITL experience is a plus Benefits of Working Here • VERY competitive salary and equity opportunities, • Pension scheme and paid leave, • Professional development budget for training, conferences, or courses, • Equipment provided to do your job effectively, • Hands-on experience with operational UAVs impacting real-world services, • Career growth opportunities into leadership roles such as Flight Control Lead, • Collaborative, expert team environment with aerospace, autonomy, and robotics specialists, • Mission-driven work - your efforts contribute to healthcare, energy, and logistics solutions in the real world, • Exposure to cutting-edge technology across hardware, software, and autonomous systems If you want to own flight control for aircraft making a real-world impact, this is your opportunity to join a team pushing the boundaries of autonomous aviation

Senior HV Project Manager required to join power arm of a FTSE 250 company. Responsible for a team of construction operatives, site supervisor, project managers and commercial staff the Senior HV Project Manager will lead schemes at voltage levels up to 132kV, ensuring their safe and successful delivery. • Lead direct and subcontract construction and installation teams, • Manage the installation and commissioning of HV systems up to 132kV, • Ensure projects are delivered according to client requirements and industry standards, • Manage projects so that they meet the highest standards of health and safety, • Manage project programme, progress and costs, reporting on associated risks and performance, • Ensure grid connections comply with network operator standards and requirements, • Stakeholder liaison - clients, DNOs, IDNOs, TNOs etc Experience: • Background as a Project Manager on substantial high voltage engineering schemes up to 132kV (substations, new connections etc), • Proven track record managing HV installation and commissioning activities, • Strong understanding of regulatory frameworks and requirements governing the industry Excellent opportunity to join an incredibly busy, thriving and growing organisation. Apply to Andrew Snelgrove at Deploy. • salary range based on skills and experience required for the role

Lead Python Engineer | Python, FastAPI, Start-up | Remote, £90-105k I’m working with a well-funded, mission-driven healthtech company building innovative technology that makes healthcare more accessible and easier to use. They’re scaling their engineering team as they expand their platform across the UK and internationally. They’re hiring a Lead Python Engineer to take technical ownership of their backend and API layer. This is a senior IC (staff/principal-level) role with real influence over architecture, standards and delivery. What you’ll be doing: • Owning backend architecture across core services, • Designing and maintaining scalable APIs (FastAPI), • Building production-grade Python services (async where appropriate), • Driving standards around testing, CI/CD, observability and performance, • Partnering closely with product, mobile and web teams What they’re looking for: • Strong production experience with Python & FastAPI, • Experience building scalable, maintainable backend systems, • High engineering standards across quality, reliability and performance, • Confident communicating trade-offs and taking ownership Nice to have: • SQLAlchemy,, • Docker,, • cloud (AWS/GCP/Azure),, • observability tooling. Package: £90,000 to £105,000 Remote-first (UK-based) Lead Python Engineer | Python, FastAPI, Start-up | Remote, £90-105k

Infrastructure DBA | Outside IR35 | £350 - £425 | 6 months | Remote We’re partnered with an innovative company who are scaling their modern EPR platform into a fully cloud‑based SaaS solution. They’re looking for an Infrastructure DBA to own performance, reliability and zero‑downtime delivery across a large, distributed, sharded database estate. What You’ll Be Doing • Monitoring and optimising distributed/sharded databases, shard allocations, replication health and overall performance, • Tuning and maintaining MySQL (replication, VReplication, patching, performance), • Managing monitoring & alerting with Prometheus, Grafana and associated tooling, • Overseeing backups, restores and DR (validations, dry‑runs, ongoing improvements), • Reviewing DBA updates, maintaining performance baselines and driving infra optimisation, • Supporting data migrations, tenant/table loading and clinical dataset onboarding into SaaS What You’ll Need • Proven experience with large sharded/distributed databases, • Strong MySQL performance tuning expertise, • Comfortable in Linux environments Nice‑to‑Haves • Experience with Vitess, • Python for tooling, automation, or performance analysis If this is a role that suits your skillset and immediately available then please apply for the job advert directly or reach out to myself at . Infrastructure DBA | Outside IR35 | £350 - £425 | 6 months | Hybrid Reading

Solar PV Field Engineer 📢 Reports to: General Manager Are you an experienced Solar PV Installer or O&M Engineer ready to take the next step in your career? We’re offering an exciting opportunity to play a key role in developing and shaping a growing Operations & Maintenance (O&M) department. This isn’t just another field-based engineering role — it’s a genuine career progression opportunity. As the department expands, your position will evolve from hands-on delivery into leadership, with real influence over strategy, growth and team development. 🚀 About the Role You’ll take ownership of Solar PV O&M activities, ensuring systems operate safely, efficiently and to the highest standard. You’ll work closely with the Operations Team and be supported as you help grow this area of the business. Initially hands-on, the role will become increasingly strategic and leadership-focused as the department develops. 🔧 Key Responsibilities Operations & Maintenance • Manage and deliver existing O&M contracts, • Conduct annual inspection and testing across commercial sites, • Monitor remote systems and proactively resolve faults, • Produce detailed monthly performance reports, • Identify system upgrades and performance improvement opportunities Remedial Works & Technical Support • Assess and respond to customer enquiries, • Diagnose faults and determine remedial actions, • Schedule and carry out site visits, • Coordinate subcontractors for larger remedial works, • Present technical recommendations clearly and professionally Department Growth & Leadership • Take ownership of O&M department growth plans, • Support recruitment, training and team development as the team expands, • Drive continuous improvement in processes and service offering ✅ What We’re Looking For • Minimum 2 years’ experience in commercial Solar PV installation, • Strong working knowledge of PV systems (practical experience valued over academic qualifications), • 18th Edition qualification, • NVQ Level 3 in Electrical Testing (2391-52), • Blue CSCS Skilled Worker (or equivalent), • Experience with leading manufacturers such as Solis, SMA, SolarEdge, Schneider, • Comfortable working with inverter reporting software and data analysis, • Working towards NEBOSH Diploma (or equivalent), • Strong organisation, time management and customer communication skills 🌱 About the Company Founded in 2015, the business has grown into a trusted provider of high-quality renewable energy solutions across industry, commerce and agriculture. We pride ourselves on: • Delivering exceptional installation standards, • Supporting a large and loyal customer portfolio, • Investing in people and technology, • Building a reputation for excellence in renewable energy 💡 Why Join? • Genuine career progression into leadership, • Opportunity to shape and grow a department, • Work with a supportive and experienced operations team, • Be part of a business with strong backing and ambitious growth plans, • Contribute to meaningful renewable energy projects If you’re driven, technically strong, and ready to take ownership of your next career move — we’d love to hear from you.

Build the technical foundation of one of the UK's leading end-of-life platforms The opportunity Aura is building a new kind of end-of-life company - one that brings clarity, warmth, and modern thinking to a category most companies get wrong. We support thousands of people through the hardest decisions and stages of life. We're looking for a senior full-stack engineer to join a small tech and product team and take genuine ownership of our technical function. This is not a ticket-picking role in a large engineering org. You'll work directly with a product team across discovery, build and iteration - and you'll work directly with the CTO on the platforms, infrastructure, and integrations that keep the business running. What you'll own Product and feature development • Work across the full product cycle - from early problem definition through to shipped features - in close collaboration with product and design, • Contribute to exploratory new product work where the problem space is still being defined, • Manage WordPress platform end-to-end: performance, plugin management, security, staging, and ongoing improvements, • Maintain and modernise existing solutions, including legacy codebases, reducing technical debt incrementally without disrupting what's working, • Build and maintain integrations across internal systems including HubSpot and ClickUp, • Take joint ownership of the technical backbone that keeps the business running day-to-day What success looks like In six months, you'll know you're succeeding when: • The WordPress platform is stable, well-documented, and improving consistently, • New product features are shipping at pace without accumulating new debt, • The codebase is cleaner and better understood than when you joined, • You're an active, trusted voice in product and design conversations - not just a delivery function What we're looking for • 6+ years of full-stack experience with Laravel/PHP and React or Next.js at the core, • Hands-on experience with WordPress beyond themes - performance, architecture and security, • Comfortable with AWS and Docker deployments, • Familiar with CI/CD pipelines (GitHub Actions or GitLab CI), • Experienced making architectural decisions in a startup or scale-up environment without a large team around you, • Comfortable using AI-assisted development tools (Cursor, Copilot, Claude Code or similar) as a genuine productivity multiplier - with the judgement to know when to override them Bonus, not essential: • Experience working in a product trio alongside a PM and designer, • Familiarity with JTBD or other customer discovery approaches, • Experience with Symfony or PHP 7 legacy migration Who you are • Self-directed and comfortable with ambiguity - you don't need a large team or detailed specs to do good work, • Genuinely interested in building products that help people, not just ship code, • Commercially aware enough to know which technical decisions serve the business and which don't, • Someone who wants ownership, not just responsibility Salary and package • £60-70k, • Contract-to-perm (preferred but negotiable), • Fully remote (UK-based), • Unlimited holiday with a high-trust, flexible culture, • Opportunity to work abroad for one month a year, • Wellness apps and anonymous counselling support

💼 Lead Platform Engineer/Platform Architect - Azure 📍Remote 👉 £80k + bonus My Product Path is working with an established organisation undergoing a large-scale digital transformation programme, modernising its technology stack and cloud platform over the coming years. As part of this journey, they are looking to hire a Lead Platform Engineer to take ownership of their cloud-first platform and help shape the future of their cloud capability. This is a senior technical leadership role combining hands-on engineering with platform strategy, governance, and capability development. The Role • The Lead Platform Engineer will act as the technical authority for the cloud platform, responsible for designing, securing, and evolving a resilient and scalable cloud environment., • You will work closely with Infrastructure, DevOps, and Systems teams to establish platform standards, security principles, and governance frameworks, while also leading the development of the Platform Engineering capability. Key Responsibilities • Cloud Platform Ownership - own the design and ongoing evolution., • Define platform architecture, shared services, and engineering standards., • Act as the technical authority for cloud networking and connectivity, • Resilience & Disaster Recovery - design and implement disaster recovery strategies., • Define regional resilience and failover models., • Lead regular DR testing and validation exercises., • Security & Governance - embed Zero Trust security principles., • Define and maintain platform hardening and security standards., • Ensure designs align with security best practice and governance frameworks., • Platform Standards & DevOps Alignment - establish platform standards, patterns, and guardrails., • Work closely with DevOps teams to deliver infrastructure through Infrastructure as CodeSupport the transition to automated, repeatable deployment models., • Leadership & Capability Development - provide technical leadership and mentorship within the platform team., • Help shape the Platform Engineering operating modelSupport future team growth and capability development. Key Skills & Experience • Proven experience designing and owning cloud platforms at scale., • Strong expertise in cloud networking (Firewalls, Front Door, NSGs, routing, service connectivity), • Experience implementing cloud disaster recovery and resilience strategies, • Strong understanding of cloud security, identity, and Zero Trust principlesExperience acting as a technical authority or platform lead, • Strong collaboration with DevOps teams using Infrastructure as Code (e.g., Bicep, Terraform or similar., • Proven experience designing and owning Azure‑based platforms at scale, with a strong focus on PaaS services and shared platform components, • Deep understanding of Azure networking and traffic flow, including Firewalls, Front Door, NSGs, routing, and service connectivity, • Experience providing platform‑level governance and architectural guidance, rather than solely delivering application infrastructure

Role Overview: The Engineering Director will provide strategic and technical leadership across our Client's engineering portfolio, ensuring the successful delivery of large and complex capital projects within the UK power and energy infrastructure sector. The role is responsible for engineering governance, technical assurance, safety in design, resource management, and stakeholder engagement across all projects. The Engineering Director will oversee engineering teams, ensure compliance with regulatory and legislative requirements, and support the company’s long-term technical and business objectives. Package: Salary - £100,000 - £120,000 Depending On Experience Standard Package Key Responsibilities • Ensure that appropriate and competent engineering resources are assigned to the delivery of large capital and complex design projects., • Identify, manage, and mitigate engineering, quality, and delivery risks to safeguard project quality, programme, and outcomes., • Provide technical leadership and governance, ensuring project designs comply with Engineering Works Information (EWI), applicable standards, and client requirements., • Ensure that technical requirements are clearly communicated to project teams and that designs are developed in line with agreed scopes and strategies., • Lead and oversee the early identification of technologies or systems requiring Technical Authority (TA) approval, and ensure approval plans are developed and implemented., • Schedule and chair design reviews, design assurance activities, and Design Authority Reviews as required., • Lead project coordination activities, including chairing meetings with contractors, consultants, and stakeholders (including remote design office)., • Organise and oversee technical workshops and safety reviews such as HAZID, HAZOP, HAZCON, and other structured risk assessments., • Promote and manage safety across the project portfolio, including Safety in Design, CDM Regulations, and Principal Designer (PD) duties, in collaboration with Project Managers and Lead Engineers., • Review construction methodologies, RAMS, and safety documentation to support safe commissioning and operational readiness., • Provide direct line management and oversight of Engineering Managers and Project Engineers, ensuring effective coordination of day-to-day engineering activities., • Develop, maintain, and strengthen relationships with external stakeholders, including clients, regulatory bodies, transmission operators, and industry partners., • Represent the client at senior technical, regulatory, and stakeholder forums as required., • Support senior management by clearly communicating complex technical issues, risks, and recommendations to enable informed decision-making., • Contribute to the continuous improvement of engineering processes, governance frameworks, and technical standards across the business., • Any other duties as deemed appropriate by the Board to support business growth and operational excellence. Minimum Requirements: • Education & Qualification: o Degree in a relevant engineering discipline (preferably Electrical Engineering) or equivalent professional experience. o Chartered Engineer status or equivalent professional recognition (preferred). • Experience: o Minimum 20 years’ experience delivering major infrastructure and capital projects, including FACTS projects (up to 400kV) within transmission and distribution networks. o Proven track record of managing complex, multi-million pound engineering programmes. o Demonstrable experience engaging with senior stakeholders, regulators, and technical authorities. • Technical Knowledge: o Strong technical knowledge of transmission and distribution networks and associated systems. o In-depth understanding of applicable UK legislation and regulatory requirements, including CDM Regulations, ESQCR, and asset/project governance frameworks. o Advanced understanding of engineering management systems, technical assurance processes, and capital project delivery models. Familiarity with UK DNO/ICP frameworks, NEC contracts, and renewable energy projects. • Skills: o Outstanding leadership, problem-solving, and decision-making capabilities. o Ability to set and steer strategic technical direction across the organisation. o Excellent communication skills, with the ability to challenge, influence, and present complex technical matters clearly and concisely. o Strong stakeholder management and relationship-building skills. • Other: o Eligibility to work in the UK. o Willingness to travel occasionally for project meetings, client engagements, and site visits. o Flexible and adaptable to meet business and project demands.

🔥 Site Engineer | Structural Steel 📍 Location: Nationwide (UK & Ireland) 🏗️ Industry: Structural Steel Fabrication & Construction 🚀 The Opportunity A leading structural steel fabrication and construction contractor delivering fabricated steel solutions across the UK and Ireland is seeking an experienced Site Engineer to join their growing team. This role is critical in ensuring the successful handover of structural steelwork, confirming plumb, line and level compliance with contractual tolerances and issuing handover certification. You will also be involved in turnkey projects, working from greenfield stage through to full project handover, coordinating with multiple trades and delivering accurate as-built documentation. 🔍 Key Responsibilities • Ensure steelwork is installed to correct line, level, and tolerance standards, • Complete and issue handover certification, • Carry out:, • As-built bolt surveys, • Cast-in plate surveys, • As-built steel surveys, • Plumb and line checks, • Casting of “dead” bolts (no cones), • Setting out of road and drainage lines, • TOPO surveys, • Produce as-built drawings using AutoCAD, • Operate Total Stations for surveying and setting out (Leica and/or Trimble robotic systems advantageous), • Manage own workload across multiple sites ✅ Requirements • Minimum 3 years’ experience completing line and level checks for steel structures, • Strong competency with Total Stations (Leica or Trimble preferred), • Ability to process survey data and produce as-built drawings in AutoCAD, • CSCS Card, • Full UK driving licence, • Willingness to travel nationwide and stay away when required, • Conscientious, hardworking, and strong communicator 💡 Why Apply? • Join a well-established structural steel contractor with nationwide projects, • Work on technically demanding steel and turnkey construction schemes, • Long-term opportunity within a growing organisation

Imagine practising medicine with the time, autonomy and support to truly make a difference. What if your next GP role gave you time with patients, clinical autonomy, and the opportunity to care for those who have served their country — all while living in Australia? Acquisitive is a full spectrum talent advisory firm that has partnered with an innovative Australian healthcare provider delivering integrated care to military veterans and their families. This is a purpose-driven GP role focused on complex care, mental health, chronic pain, and modern treatment approaches including medicinal cannabis. What Makes This Role Different This is not a high-volume GP clinic. The model is built around longer consultations and multidisciplinary care for veterans with complex physical and psychological health needs. Your work may include: • Comprehensive primary care for veterans, • Veteran health assessments and care planning, • Medicolegal and clinical reporting, • Prescribing or advocating medicinal cannabis, • Trauma-informed care and mental health support, • Collaboration with specialists and allied health teams You will also support patients connected with the Department of Veterans' Affairs Australia. Why Many UK GPs Choose Australia Australia offers the opportunity to practise medicine within well-supported, modern healthcare environments. ✔Longer consultations ✔ Strong clinical autonomy ✔ Modern clinic infrastructure ✔ Competitive earning potential ✔ Excellent lifestyle and work–life balance Veteran healthcare in Australia is also evolving under reforms such as the Veterans’ Entitlements, Treatment and Support (Simplification and Harmonisation) Act 2025, which is simplifying healthcare access for veterans. Who We're Looking For • CCT-qualified UK General Practitioners, • Registered with the General Medical Council, • Interested in veteran or military healthcare, • Open to prescribing or advocating medicinal cannabis, • Motivated to relocate to Australia Experience in mental health, medicolegal practice, chronic pain or Defence medicine is highly valued. Relocation Support UK GPs benefit from structured pathways to practise in Australia, including the Expedited Specialist Pathway. Support includes: • Registration pathway guidance, • Visa and relocation support, • Clinical onboarding, • Mentorship in veteran healthcare 📩 Interested in exploring a move to Australia? If you’re a UK GP curious about practising in Australia and supporting veteran healthcare, we’d welcome a confidential conversation.

Medical Underwriter (Life & Protection) Location: UK (Fully Remote) Start Date: Early April Company: Albany Beck Client Industry: Life & Protection Insurance About Albany Beck Albany Beck is a Management Consultancy focused on delivering specialist transformation solutions to Financial Services clients. We combine deep industry expertise with modern delivery practices, enabling clients to scale effectively while offering meaningful, long‑term career development for our people. Joining Albany Beck means being part of a consultancy committed to learning, professional growth, and delivering exceptional client outcomes. Role Overview Albany Beck is scaling its Operations practice and are looking to hire multiple Medical Underwriters to support one of our largest Insurance clients, during a critical period of operational transition. The client is launching a new underwriting system and will be releasing their permanent Underwriters to complete system training. To ensure service continuity and prevent backlog escalation, we are deploying a team of experienced underwriters to “hold the fort” and manage live case volumes during this period. This is a fast-moving requirement with urgent start dates. Key Objectives • Reduce and manage an existing underwriting backlog (currently c.10 days and increasing), • Maintain service levels during system training rollout, • Ensure underwriting quality standards remain high throughout the transition, • Support business continuity during a key system launch period Key Responsibilities • Perform medical underwriting assessments across Life & Protection policies, • Review, interpret, and summarise:, • Medical records, • GP reports, • Supporting clinical documentation, • Assess risk in line with underwriting guidelines and regulatory requirements, • Maintain accurate documentation across case files, • Meet agreed daily case handling targets, • Undertake initial quality control reviews during onboarding phase, • Progress to independent case handling following sign-off (with ongoing dip-check quality assurance), • Contribute to backlog reduction efforts while maintaining accuracy and compliance Key Skills and Experience Required • Proven experience as a Medical Underwriter within Life & Protection Insurance, • Strong background in underwriting for Financial Services / Insurance organisations, • Experience reviewing and summarising medical and GP records, • Solid understanding of Life & Protection underwriting risk frameworks, • Ability to manage case volumes efficiently while maintaining quality, • Comfortable working independently in a fully remote environment Ideal Candidate Profile • Immediately available or able to start early April, • Strong attention to detail and quality-focused mindset, • Able to quickly integrate into established underwriting processes, • Comfortable working to daily productivity expectations, • Professional, reliable, and delivery-oriented Why Join Albany Beck? • Immediate opportunity to support a major system transformation within Life & Protection, • Flexible remote working model, • Work with a consultancy experienced in delivering specialist Insurance resource solutions

Service Care Solutions are working in partnership with a specialist ADHD healthcare provider to recruit an experienced ADHD Assessor & Prescriber for an ongoing contract opportunity. This clinician-led service delivers high-quality ADHD assessment, diagnosis and treatment to adults across the UK, helping to reduce waiting times through accessible, patient-centred care. This is a home-based / remote role with optional on-site work available. Through Service Care Solutions, you will join a structured, governance-led service delivering both ADHD assessments and medication management, supporting adults throughout the full diagnostic and treatment pathway. This opportunity is ideal for clinicians who are qualified to assess, diagnose and prescribe, allowing them to manage patients from initial assessment through to medication titration and ongoing care. Job: ADHD Assessor & Prescriber Assessment Pay: £140.00 LTD per assessment (rising to £150 after 200 assessments) Titration Pay: £30 per titration (rising to £35 after 500 titrations) IR35 Status: Outside IR35 Bonus: £250 Welcome Bonus, paid via Service Care Solutions Location: Remote Working Hours: Monday to Sunday, 08:00–20:00 Responsibilities • Conduct comprehensive adult ADHD assessments in line with recognised clinical frameworks, • Gather and review detailed clinical histories, symptom presentation and functional impact, • Produce high-quality diagnostic reports and clinical documentation, • Initiate and manage ADHD medication treatment plans where clinically appropriate, • Conduct medication titration reviews, monitoring treatment response and side effects, • Adjust prescribing plans safely and effectively within scope of practice, • Provide clear outcomes, treatment recommendations and patient education, • Maintain accurate patient records while adhering to clinical governance and data protection standards, • Work autonomously while collaborating with the wider multidisciplinary team Requirements • Qualified Independent Prescriber (V300 or equivalent), • Professional background as a Registered Nurse or Pharmacist, • Current NMC or GPhC registration, • Accredited training in ADHD assessment and diagnosis, • Minimum 6 months’ experience completing ADHD assessments, • Minimum 6 months’ experience conducting ADHD titrations for adults, • Strong clinical decision-making, prescribing and report-writing skills, • Ability to work autonomously in a remote clinical environment How to Apply Why join Service Care Solutions? £250 Welcome Bonus To Apply: Please contact Chris E: T: (01772) 208 963

Job Title: Referrals & Contracts Manager Role Purpose To lead and manage the organisation’s referral pathway, contract management, mobilisation of new services, and bid/tender submissions within a CQC-regulated supported living environment. The role is responsible for ensuring safe, suitable placements, contract compliance, sustainable occupancy levels, and high-quality tender submissions that support strategic growth. This role directly impacts revenue stability, regulatory compliance, and commissioner confidence. Key Responsibilities Referral Management & Placement Oversight • Act as the central point of contact for all incoming referrals from Local Authorities, ICBs, and other commissioners., • Review referral documentation including assessments, risk profiles, funding approvals, and care requirements., • Assess placement suitability in collaboration with Registered Managers and clinical/operational leads., • Coordinate timely responses to commissioners within agreed KPIs., • Maintain a live referral tracker, pipeline forecasting, and conversion analysis., • Ensure placements align with service capacity, skill mix, and CQC registration scope., • Lead mobilisation of new placements from contract agreement to service commencement., • Coordinate staffing requirements, recruitment, training needs, and rota planning., • Ensure all care plans, risk assessments, MAR charts, and compliance documentation are in place prior to go-live., • Liaise with housing providers, landlords, and external professionals where required., • Oversee structured handover to operational teams post-mobilisation., • Maintain oversight of all placement contracts and service agreements., • Review contract terms to ensure pricing, service scope, KPIs, and reporting requirements are understood and adhered to., • Track contract start/end dates, uplift cycles, renewal deadlines, and framework agreements., • Support negotiations on fee uplifts, variations, and amendments., • Ensure services are delivered in line with contractual obligations and funding agreements., • Work closely with finance to ensure billing accuracy and alignment with commissioned hours., • Identify and monitor tender opportunities through procurement portals and commissioner networks., • Lead completion of PQQs, ITTs, DPS applications, and framework submissions., • Coordinate contributions from operations, finance, HR, and quality teams., • Maintain and update a tender library including policies, KPIs, case studies, and CQC evidence., • Track submission deadlines, clarifications, and award outcomes., • Develop and maintain strong professional relationships with commissioners, social workers, care coordinators, and housing partners., • Represent the organisation at provider forums and partnership meetings., • Produce regular reports on referral volumes, conversion rates, occupancy, and contract status., • Monitor trends in referral rejection, voids, and contract performance risks., • Provide data insights to senior leadership to support strategic planning.