Aviation management jobs in Phoenix, ArizonaCreate job alerts

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview The ideal candidate will have experience in managing airport planning projects from small to large scale at both general aviation and commercial service airports. The candidate will also have strong communication skills and understanding of aviation planning, environmental, sustainability, land use, construction, and commercial development principles. Experience and understanding of FAA policies and standards is also important. Specific assignments will depend on the skills of the individual. Position Responsibilities • Manage all aspects of the project from identification of opportunities through project close out., • This includes participating and developing material for proposals and project interviews, determining scope of work, estimating fees, negotiating contracts, budgeting and cost control, scope and schedule control, staff resource management and quality control of all assigned projects., • Serve as primary client contact., • Lead public and stakeholder participation sessions., • Coordinate efforts with local, state, regional and federal agencies., • Maintain current knowledge of aviation industry services, projects, and trends., • Bachelors Degree in planning, engineering or a related field., • AICP, LEED AP, ENV SP, PE, AAAE CM certification, or pilots license preferred., • 10 plus years of related experience specific to the position., • Excellent oral and written communication, interpersonal, organizational and analytical skills. $150,000 - $195,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

KP Aviation, an international supplier and procurer of aftermarket aviation components and assets, is searching for the next key member of our team! The Senior Product Line Manager – Engines is responsible for leading the strategy, performance, and execution of the engine component portfolio. This role oversees key areas of the business, including acquisitions, repairs, inventory management, and commercial strategy, with a focus on maximizing asset value and profitability. This position also provides leadership to Product Line Representatives, guiding decision-making through market insights and customer demand. It is a high-impact role that plays a critical part in driving overall business performance and supporting long-term growth within the aviation aftermarket. Remote work may be considered for candidates with the appropriate experience who are located outside the Phoenix area. Your role will take you to new heights, as you will be tasked with these essential job responsibilities: • Own the Product Line: Manage the full lifecycle of (XYZ) engine component assets—from acquisition and teardown through repair, inventory, and financial performance., • Drive Financial Performance: Support underwriting activities, ensuring investments meet ROI/IRR targets and deliver gross margin and EBITDA objectives., • Lead Strategy & Pricing: Develop market-aligned pricing strategies for modules and piece parts to maximize profitability and support growth., • Guide Investment Decisions: Evaluate engines, modules, and material packages, making high-value decisions based on market data and technical insight., • Optimize Teardown & Repair Execution: Oversee workscope development, vendor selection, and material routing to maximize yield, reduce cost, and improve turnaround time., • Align with Sales: Partner with Sales leadership to support customer strategy, demand trends, and key package opportunities., • Build Market Intelligence: Maintain deep insight into platform dynamics, including repair costs, market trends, and supply/demand conditions., • Develop Relationships: Negotiate with MROs, suppliers, internal stakeholders, and customers to secure favorable commercial terms and strategic opportunities., • Shape Inventory Strategy: Drive inventory turnover, reduce aging stock, and contribute to building a sustainable asset pipeline aligned with long-term growth., • Lead & Develop Talent: Mentor and develop a high-performing team, fostering accountability, technical expertise, and commercial awareness., • Represent the Business: Act as a senior representative at industry events, customer engagements, and technical discussions to strengthen market presence., • Perform other senior-level responsibilities as assigned by management. To succeed in this role, you will need to have: • Deep expertise in (XYZ) engine platforms and the commercial aviation aftermarket., • Strong financial acumen, including underwriting, teardown economics, and ROI/IRR-driven decision-making., • Proven experience managing engine lifecycle activities (acquisition, teardown, repair, and resale)., • Advanced understanding of engine records, LLP trace, AD/SB compliance, and shop visit strategy., • Track record of negotiating with MROs, suppliers, and customers to drive value., • Experience leading and developing teams in a fast-paced, asset-driven environment., • Strong analytical, strategic thinking, and decision-making capabilities., • Excellent communication skills with the ability to influence both technical and executive audiences. We significantly value our employees and believe in compensating each with a substantial benefits and compensation package including: • Generous Medical, Dental, Vision, Life and Short-Term Disability coverage (Employer pays 100% of employee premiums), • 401(k) Plan with Employer Contribution, • Profit Sharing and Bonus opportunities, • Voluntary ancillary plans including Life Insurance, Accident and Hospital coverage, • Paid Time Off and Paid Holidays EXPORT CONTROL REQUIREMENTS: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. DRUG FREE WORKPLACE: KP Aviation is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies. BENEFITS: At KP Aviation, we aim to provide a comprehensive compensation package that stands out in the industry, helping us attract, engage, and retain top talent. Our package includes competitive base pay, health, dental, and vision insurance, life and short-term disability coverage, a 401k/retirement plan, paid time off and holidays, and much more. EQUAL OPPORTUNITY EMPLOYER: KP Aviation is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Candidate must be authorized to work in the US Location: Glendale, AZ - Onsite, No Hybrid or Remote Work Position Summary: The Product Line Manager – Airframes is responsible for delivering in-depth market analysis, technical support, and pricing strategies to drive revenue and profitability from the company’s airframe material portfolio. This role supports the sales organization in monetizing owned airframe assets, while also engaging in the evaluation, valuation, and procurement of aircraft and surplus material packages. The position involves strategic purchasing based on market demand, and requires collaboration with internal stakeholders including the Director of Airframe Product Lines, Sales VPs, global Account Managers, and supplier-facing departments. A strong understanding of the commercial aircraft parts aftermarket—particularly availability, demand, and valuation—is essential. Duties & Responsibilities: • Evaluate whole assets for acquisition and define strategies to maximize revenue and profitability, • Manage disassembly processes, coordinate drop shipments, and select component repair stations to optimize cost and turnaround time (TAT), • Ensure that materials are properly certified and readily available to support sales efforts, • Maintain current and competitive pricing structures for managed material, • Build and maintain strong relationships with internal teams and external partners, • Focus on aging inventory and drive redeployment of capital to acquire newer, high-value assets, • Assist the Director of Product Lines in preparing forecasts, valuations, and supporting documentation for internal approval boards (Commercial Review Board, CFO, CEO), • Negotiate pricing and commercial terms aligned with company return targets (ROI/IRR), • Help build and manage a team of Strategic Buyers to inform purchasing decisions through market intelligence and internal demand data, • Report monthly on material sales performance and provide updates on acquired inventory against sales targets Required Qualifications: • Minimum 5 years of experience in aviation material and sales roles, • Demonstrated ability to develop strong relationships with existing and prospective buyers and sellers, • Strong written and verbal communication skills, • Working knowledge of asset management and contract negotiation processes including LOIs and Sales & Purchase Agreements (SPAs), • Strong organizational and prioritization skills across multiple concurrent opportunities, • Ability to work cross-functionally with Technical, Repairs, and Strategic Purchasing teams, • Comfortable operating in a fast-paced environment while maintaining focus and meeting deadlines, • Proficiency in Microsoft Word, Excel, and Outlook Preferred Qualifications: • Bachelor’s degree in Business Administration, Aviation Management, or a related field Travel: • Travel is required to attend conferences and meet with customers or suppliers, as needed by the Executive team Language: • Ability to read, write, speak, and understand English Physical Demands: • Work Environment: 90% office / 10% shop floor (including visits to repair stations and teardown facilities) Working Conditions: • Primarily office-based, with occasional visits to partner repair stations or teardown sites

Summary: We are a fast-paced aviation company with rapid growth opportunity, and we are seeking a highly motivated team member to join our Phoenix facility. Works under the administrative direction of the VP of Operations, with minimal supervision. Responsible for business operations and driving continuous improvement efforts to grow the business unit. Full focus on Safety, Quality, productivity, efficiency, and profitability of departmental and organizational operations for a plant through the provision of effective methods and strategies. This position performs safety-sensitive functions. Essential Duties and Responsibilities • Direct and coordinate activities of departments concerned with the production, sales, and distribution of products, • Manage staff, preparing work schedules and assigning specific duties, • Work with quality procedures and manuals to ensure compliance with company standards, • Review sales, operational metrics and activity reports, and other performance data to measure productivity and goal achievement and to determine areas needing cost reduction and program improvement, • Managing and improving workflow through the constraint and bottleneck processes, • Manage personnel and provide leadership to achieve operational goals this includes but not limited to; staffing requirements, interviewing, hire, managing the cross-training plan, train new employees, • Perform shop floor optimization, lean improvements, and ensure conflict resolution to drive profitable growth, • Cooperatively works cross functionally with other management to ensure appropriate allocation of resources and human power, • Preemptively identifies negative trends and creatively works to achieve win-win solutions with other management when conflicts occur, balancing program requirements with resource constraints, • Effectively addresses customer concerns and obtains solutions such as reallocation of resources, revised schedules or modified contractual specification What you’ll bring: • 5-10 years of experience in operations management is desired, • FAA Airframe and Power Plant License, • Must be certified under FAA Part 65, • Must have knowledge of a general technical field such as engineering, contracts administration, or program management., • Fluent verbal and written English skills are required., • Proficient in the use of computers as well MS Office products, • Must be a team player who will contribute ideas and solutions., • Strong communication skills. Drug Free Policy: This is a drug free company and candidates must be able to pass a pre-employment drug test, physical and background. Random drug tests are performed as well. Benefits: AeroRepair provides a comprehensive suite of benefits including medical, dental, vision, short and long[1]term disability, life, paid time off, tuition reimbursement, and retirement savings with company match focused on a providing health and financial stability throughout the employee’s career. Sign on Bonus: $1,000.00 Conditions Apply. About AeroRepair: AeroRepair is a rapidly growing FAA authorized aviation service provider with nine locations throughout North America. Headquartered in Londonderry, New Hampshire, AeroRepair was founded in 1994. Today, AeroRepair employees are some of the most talented, well-seasoned leaders in the industry. Success for us means being part of a collaborate team where goals are exceeded, and people matter. We offer competitive salary, market leading benefits, a culture of continuous improvement and career advancement in the growing Aircraft Maintenance Industry. If that sounds like something you’d like to be part of, we’d love to hear from you

About WFS Join our Worldwide Flight Services family and contribute to the timely delivery of cargo shipment, luggage, business to customer delivery, and on-time flights while operating safely and securely. We perform at the highest level for our customers every day, and strive to be an exceptional leader in our industry with our teams of cargo, passenger, ramp handling, and technical service experts in 164 airport locations, 18 countries, and on 5 continents. Are you ready to take off on your next career with us? Job Summary The Operations Intern will support daily activities across WFS’s aviation service operations, including cargo handling, express logistics, passenger services, and ground handling functions. Over the course of two rotational assignments, interns gain exposure to warehouse operations, compliance processes, customer service, and workflow optimization while contributing to real business challenges through a capstone project. Responsibilities • Support day-to-day cargo warehouse operations, including shipment receipt, processing, scanning, and material movement., • Assist ground handling teams with aircraft turn operations, ramp safety practices, and equipment staging., • Observe and support passenger service workflows such as check-in, boarding, and customer flow management (site-dependent)., • Collect and record operational data to support productivity, staffing, and workflow analysis., • Assist with operational documentation, regulatory requirements, and audit preparation activities., • Support supervisors with resource planning, routing, and daily shift preparation., • Conduct safety observations and assist with local safety and compliance initiatives., • Engage with airline customers, logistics partners, and internal operations teams to support daily service needs., • Identify an operational improvement opportunity and complete a capstone project including research, data analysis, and a business case presentation to local or regional leadership., • Participate in professional development activities including leadership workshops, Lean Six Sigma introductory training, and structured mentoring. Minimum Requirements • Currently enrolled in an accredited college or university (Associate’s or Bachelor’s degree), • Good academic standing and strong communication skills, • Candidates must be upperclassmen, with a strong preference for juniors and seniors nearing graduation., • Candidates must be located in—or have independently secured housing near—one of the designated internship locations for the duration of the program; housing and relocation assistance are not provided., • Ability to commit to a full-time summer schedule (40 hours/week) plus travel to Dallas. Preferred Qualifications • Preferred majors: Aviation, Supply Chain, Logistics, Business, Operations Management, Engineering, or related fields., • Strong written and verbal communication skills., • Demonstrated interest in aviation, logistics, or operational environments., • Ability to work both independently and collaboratively., • Basic data analysis skills (Excel, Sheets, or BI tools). Target Internship Locations • LAX – Los Angeles, CA, • ORD – Chicago, IL, • DFW – Dallas–Fort Worth, TX, • PHX – Phoenix, AZ Physical Working Conditions & Requirements This role requires exposure to active airport and warehouse environments. Physical Requirements • Ability to stand, walk, or be on feet for extended periods (up to 8 hours), • Lift, push, pull, or move items up to 35–50 lbs. (with or without accommodation), • Work in varying climates including heat, cold, rain, and outdoor ramp conditions, • Ability to bend, kneel, crouch, and climb short steps or ladders as part of operations, • Comfortable around aircraft noise, warehouse equipment, and moving vehicles (PPE provided) Work Environment • Fast-paced operational setting, • Mix of indoor (office), (warehouse) and outdoor (ramp) work depending on rotation, • Required use of PPE: safety vest, hearing protection, gloves, etc., • Must follow all airport security, safety, and regulatory guidelines Perks & Benefits • Want your pay in advance? Access your pay when you need it through DailyPay app!, • Are you a top performer who thrives on recognition? On the spot awards offered through the Awardco Platform including gift cards and more!, • Need quality medical care? Multiple options for both full and part-time employees!, • Want WFS Employee Extras? Travel Discounts, Pet insurance, Discount Shopping & More!, • Looking to stay healthy and improve your life? Wellness Programs offered to all employees!, • Want to invest in your future? 401k program offered!, • Looking to grow and have a career with us? Opportunity for Internal Mobility and transfers available! WFS is an equal opportunity employer committed to employment equity and inclusion. We accept applications from all qualified individuals.

We are seeking an experienced and strategic Senior Heavy Civil / Highway Estimator in Phoenix, AZ (and Flagstaff, AZ) to lead estimating efforts for large-scale infrastructure and transportation projects. This role is responsible for developing competitive, accurate, and risk-aware bids across scopes such as mass grading, earthwork, concrete, asphalt paving, and aviation-related infrastructure. The ideal candidate has strong heavy civil estimating experience, thrives in a high-performance environment, and can influence bid strategy and company positioning to consistently win work. RESPONSIBILITIES AND ESSENTIAL DUTIES: • Analyze plans, specifications, and geotechnical reports to develop accurate, risk-adjusted estimates, • Perform site visits and pre-bid evaluations to assess project conditions and constructability, • Define scopes of work including self-performed vs subcontracted work, • Build and distribute bid packages to subcontractors and suppliers, • Develop and execute pricing strategies, including DBE/SBE participation when required, • Prepare detailed estimates using HCSS HeavyBid, including takeoffs, assemblies, and cost modeling, • Evaluate and level subcontractor and supplier quotes, making award recommendations, • Lead internal bid reviews and challenge assumptions prior to bid submission, • Collaborate with Chief Estimator, project managers, and executive leadership to align bid strategy, • Identify risks and opportunities to improve competitiveness, accuracy, and profitability MINIMUM REQUIREMENTS: • Bachelor’s degree in Construction Management, Engineering, or related field (or equivalent experience), • 5+ years of heavy civil / roadway estimating experience (aviation experience preferred), • Proven experience estimating grading, concrete, asphalt, aggregate, and transportation scopes, • Advanced proficiency with estimating software including HCSS HeavyBid, • Experience with tools such as AGTEK, OST, Primavera P6, and Microsoft Excel, • Strong analytical, communication, and presentation skills with confidence presenting to leadership, • Competitive mindset with a strong “win the work” mentality

ABOUT THE CLIENT We are current representing a company that is a premier, full-service construction management and general contracting firm that operates nationwide with a strong presence in the Southwest. Established over 15 years ago, the organization has built a reputation as a "solution driver," acting as a dedicated partner to clients across a diverse range of sectors, including high-tech (data centers and semiconductors), healthcare, aviation, education, and municipal projects. * ABOUT THE ROLE • Mastering the Flow: You won’t just "watch work." You’ll lead Pull Planning sessions with trade partners to ensure the sequence is flawless. No more "waiting on the sparkies" because the drywallers showed up early., • Mission Critical Strategy: You’ll oversee the most complex parts of the build—Commissioning (Cx), MEP integrations, and clean-room environments where there is zero margin for error., • Mentoring the "Pups": You’ll have a team of Assistant Superintendents and Field Engineers. Your job is to train them to be as good as you are., • Safety as a Value: You’ll lead a jobsite where safety isn't a "check-the-box" activity, but a core part of the Servant Leadership culture. ABOUT THE CANDIDATE • The "Mission Critical" Gut: You’ve spent years in the dirt on Data Centers, Hospitals, or Life Science projects. You understand the "lifeblood" of these buildings (the MEP systems) better than the engineers do., • 12–15+ Years of Field Grit: You started in the trades or came up through the field. You have the "scar tissue" from successful data center builds to prove you can handle the pressure., • The Lean Mindset: You’re tired of the "old way" of building. You’re ready to use Outbuild or Link-it to coordinate your trades and shave weeks off the schedule., • Presence: When you walk into the trailer, people listen—not because you're loud, but because you're the most prepared person in the room.

ABOUT THE CLIENT We are current representing a company that is a premier, full-service construction management and general contracting firm that operates nationwide with a strong presence in the Southwest. Established over 15 years ago, the organization has built a reputation as a "solution driver," acting as a dedicated partner to clients across a diverse range of sectors, including high-tech (data centers and semiconductors), healthcare, aviation, education, and municipal projects. ABOUT THE ROLE • Leading High-Stakes Builds: You’ll run the show on MEP-heavy, $30M–$60M+ projects (Data Centers, Acute Care) where precision is everything., • Mastering Lean: You won’t just be "managing a schedule." You’ll use the Last Planner System™ and digital Lean dashboards to run a cleaner, more predictable job site., • Mentoring the Next Gen: You’ll have a team of APMs and PEs under you. Your success will be measured by how well you grow them, not just the profit margin., • Owner Advocacy: You’ll be the face of the firm for sophisticated institutional clients, acting as a consultant rather than just a contractor. ABOUT THE CANDIDATE • The "Mission Critical" DNA: You understand that a 10-minute power outage on your site is a catastrophe. You know generators, chillers, and UPS systems inside and out., • 8–12 Years of Grit: You’ve paid your dues in the dirt and the trailer. You have at least 5 years of solid commercial experience in North Texas., • Tech-Forward Mindset: You’re an expert in Procore and are excited about using advanced scheduling tools like Outbuild to eliminate waste., • Cultural Alignment: You lead with Servant Leadership. If you have an "ego-first" management style, you won't fit here. We value integrity and respect for the trade partners above all.

LHH is partnering with a large construction company in search of a Senior Estimator for their Tempe, AZ location. In this role, you will have the opportunity to lead high-value estimating efforts for large-scale projects across hard bid/lump sum, construction management and design-build deliver models. They are seeking someone with a deep understanding of commercial concrete structures. This is a direct hire job that offers a salary paying between $140K - $170K base. Here are some more details about this role: RESPONSIBILITIES • Detailed analysis of isometric, as-built and engineering drawings for hard-bid/lumpsum, construction management and large design build projects, • Creates critical path schedules including milestone dates and completion of timelines that satisfy the contract requirements, • Take-offs, materials, construction equipment pricing – ensuring bids validity and price escalation QUALIFICATIONS • Someone coming from commercial concrete structures such as data-centers, higher education or aviation, • Bachelor’s degree in related disciplines or trade experience, • 10+ years of progressive construction cost estimating with at least 12 months of onsite exp BENEFITS • Employee ownership opportunities that build long-term value and commitment, • Discretionary annual bonuses opportunities, • 401(k) with company match, comprehensive medical, dental and vision benefits If you are interested in this role, send your resume to or to visit to see all of our openings. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance

LHH is partnering with a large construction company in search of a Senior Estimator for their Tempe, AZ location. In this role, you will have the opportunity to lead high-value estimating efforts for large-scale projects across hard bid/lump sum, construction management and design-build deliver models. They are seeking someone with a deep understanding of commercial concrete structures. This is a direct hire job that offers a salary paying between $140K - $170K base. Here are some more details about this role: RESPONSIBILITIES • Detailed analysis of isometric, as-built and engineering drawings for hard-bid/lumpsum, construction management and large design build projects, • Creates critical path schedules including milestone dates and completion of timelines that satisfy the contract requirements, • Take-offs, materials, construction equipment pricing – ensuring bids validity and price escalation QUALIFICATIONS • Someone coming from commercial concrete structures such as data-centers, higher education or aviation, • Bachelor’s degree in related disciplines or trade experience, • 10+ years of progressive construction cost estimating with at least 12 months of onsite exp BENEFITS • Employee ownership opportunities that build long-term value and commitment, • Discretionary annual bonuses opportunities, • 401(k) with company match, comprehensive medical, dental and vision benefits If you are interested in this role, send your resume to or to visit to see all of our openings. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance

Job DescriptionDescriptionWe are seeking an experienced Captain to join our Citation X+ at Silver Air. This is not a low-utilization seat. This aircraft operates in a true 135/91 hybrid environment and flies consistently—supporting both owner missions and steady charter demand. The role is best suited for a pilot who understands how a high-performing aircraft operates and values consistency in both flying and compensation. This is an excellent opportunity for someone who wants a unique seasonal lifestyle—spending winters in Scottsdale (SDL) from November through May, and summers in Driggs, Idaho (DIJ) from June through October. The owner provides $1,500/month for camper hookups, covers travel to and from Scottsdale on your days off, and offers condo access in Driggs for short stays. This Citation X+ has recently completed a full modernization, including new paint, redesigned interior, upgraded galley, and Starlink connectivity. It is one of the most well-equipped X+ aircraft flying today—built to perform at a high level operationally while delivering a premium client experience. The Captain is responsible for the safe and prudent operation of the aircraft, but also for how that operation is executed. This is a hands-on, real-world Part 135 environment. You are expected to manage flight planning, weather and risk assessment, and coordinate closely with dispatch and maintenance—while maintaining sound judgment and professionalism in a dynamic schedule. From a business standpoint, this aircraft has been operating at a high level of utilization over the past two years. That consistency is intentional. In Part 135, stable compensation and operational investment are directly tied to how effectively the aircraft is flown. This role benefits from that structure—offering steady flying, funded training, and a compensation model supported by actual aircraft performance. We are looking for a Captain who understands the difference between simulator precision and real-world execution. The Citation X+ is a high-performance aircraft, and expectations are centered on smooth, controlled, and professional operation. Prior PIC turbine experience is required; Citation X/X+ experience is strongly preferred. This is a visible seat with a high-performing account. It requires accountability, consistency, and the ability to operate without heavy oversight. The SDL/DIJ split-base model is a meaningful advantage for the right pilot, particularly those who value seasonal movement and flexibility. For others, especially with fixed home-base or family constraints, it should be considered carefully. If you are a team-oriented pilot who seeks excellence in execution, understands the realities of Part 135 flying, and wants to be part of an operation that is both active and financially grounded, this may be the right fit. What you'll be doing: • Reviewing the maintenance status of the aircraft to ensure airworthiness., • Conducting proper pre-flight inspection in accordance with the approved Aircraft Flight Manual., • Completing check of weather and facilities along the route to be flown and airports to be used, including alternate airports., • Ensuring the flight is conducted in accordance with the policies and procedures of Silver Air and applicable Federal Aviation Regulations., • Ensuring the safety of all passengers, aircraft, and crew., • Total time in all aircraft = 3500 hours/3000 hours as PIC., • Multi-engine time = 3000 hours/2000 hours as PIC., • Total Turbine time = 1750 hours preferred., • Total time in airplane type = 200 hours/100 hours as PIC., • Type rated on CE-750. Or comparable aircraft., • Valid First Class Medical Certificate. This is required., • Previous Part 135 experience. This is preferred, but not required., • Compliant with ICAO Annex I - 2.1.1.0. As it pertains to aircraft engaged in international commercial air transport operations with more than one pilot., • CANPASS authorization. You'll need the ability to obtain and maintain CANPASS authorization for unrestricted travel to/from Canada as a commercial pilot., • Strong customer service skills. Excellent communication skills (verbal and written) will need to be demonstrated with all levels of employees and clients. Communication must always be delivered with a superior level of professionalism., • High level of detail. You'll need to be highly organized with the ability to thrive in changing environments and the flexibility for frequently changing priorities., • Excellent time management skills. You'll need to be able to work on an on-call basis, with the ability to work well under pressure and to multi-task. Silver Air is a 24/7 organization, so this role requires a flexible schedule, including nights, weekends, and Holidays., • Personalized schedule with 14/7 schedule with a 3 Captain Crew., • Our Flight Support team handles travel logistics., • Paid leadership, hospitality, and flight simulator training with a two-year training agreement., • Fly well-maintained equipment with modern technology., • KCM badge, paid medical exams, extra passports, and cell phone stipend., • Premium medical benefits fully paid for employee and family, vision, dental, life insurance, HSA, and FSA., • 5% company match on 401(k) from day one., • Employee Assistance Program for personal concerns., • Flexible leadership team and owner group, • Pet insurance, • Competitive compensation with regular pay reviews.

Job Description Safety Engineer Location: Texas Salary: Competitive Experience Level: 3-5+ Years Description United Trades of America is seeking a Safety Engineer to support and enhance jobsite safety across our diverse construction portfolio. In this role, you'll help implement safety programs, enforce regulatory compliance, and build a culture where safety is embedded in every action. Whether working on aviation, education, multi-family, or civic projects, your impact will be felt daily. Responsibilities • Monitor and enforce project safety compliance on active construction sites, • Conduct daily safety walks, inspections, and audits, • Deliver onboarding, toolbox talks, and safety training sessions, • Investigate incidents, near-misses, and develop corrective action plans, • Maintain accurate safety documentation and reports, • Support project teams with site-specific safety plans and JHAs, • 3+ years of field experience in construction safety (GC preferred), • Knowledge of OSHA 1926 standards and local safety regulations, • OSHA 30-Hour Certification required; CHST preferred, • Strong interpersonal and observational skills, • Competitive compensation and career advancement opportunities, • Full medical/dental/vision benefits + 401(k) match, • A safety-first company culture with strong field support

Job Description Please note: This is an on-site position that requires the selected candidate to work from our North Phoenix, AZ, office. This is not a remote role; we follow a 9/80 onsite schedule, where every other Friday is off. About Acron Aviation (Avionics): Acron Aviation designs, engineers, and manufactures certified avionics systems that support safety‑critical flight operations across commercial and military aviation. Our avionics portfolio includes surveillance, recorders, displays, and related systems developed in regulated environments and deployed on aircraft worldwide. We partner closely with operators and OEMs to deliver reliable, certifiable technology throughout the full product lifecycle—from development and qualification through production and aftermarket support. At Acron Aviation, avionics engineering is rooted in technical rigor, operational discipline, and a customer‑first approach to execution. About our Surveillance Products: Acron Aviation’s Surveillance organization develops and sustains safety‑critical systems that enable aircraft awareness, collision avoidance, and airspace interoperability. Our surveillance portfolio includes ADS‑B, Mode S transponders, traffic collision avoidance, and integrated surveillance solutions deployed across commercial, military, and rotorcraft platforms. This work is performed in highly regulated environments. It requires deep expertise in systems, hardware, software, and RF across the full lifecycle—from requirements and certification through production and in‑service support. Surveillance engineering at Acron Aviation emphasizes technical rigor, disciplined execution, and close coordination with operators and OEM partners. Job Description: Acron Aviation is seeking a Lead System Engineer for ADS-B In projects to play a critical role in the design, implementation, introduction, and certification of a new surface alerting safety function. We are looking for a candidate with strong project management skills and cutting-edge technical expertise. This role demands that you have the ability and desire to work across a variety of functions and teams to find solutions and be comfortable implementing them. You must be flexible, dynamic, and proactively communicate with your co-workers, management, and customers alike. Finally, you must excel at managing your time and prioritizing multiple requests and demands, while thriving in an environment where you enjoy making contributions that positively impact the company’s success. Essential Functions: · Developing new system designs, writing system specifications, and supporting modeling development. · Developing system-level models, creating and validating systems through fast-time simulations, and supporting modeling and testing efforts as needed. · Developing system test procedures and test scripts, executing these tests, and analyzing results. · Assisting with flight tests and analyzing results. · Interfacing with customers, suppliers, and internal functional groups (software engineering, hardware engineering, project lead, program management, customer support, etc.). · Help maintain and develop engineering processes. · Assistance in the design, test, and maintenance of all products. Qualifications: · Minimum of a Bachelor of Science Degree in Aerospace Engineering, Electrical Engineering, or related engineering discipline · Bachelor’s Degree and a minimum of 9 years of prior relevant experience, or a Graduate Degree and a minimum of 7 years of prior related experience. Preferably in the avionics industry · Experience must include writing system requirements and system validation procedures · Extensive experience in systems engineering, MATLAB, Simulink, and Python. · Experience with programming languages C or C++ is welcomed. · Knowledge of ARP-4754A and DO-178 processes · Experience with avionics products (TCAS/ADS-B/SURF-A/displays/flight data recorders) Ideal Candidates · Knowledge of ADS-B In functionality and associated applications that support · Good interpersonal skills and can work with multiple teams, and work directly with Acron customers · Demonstrates ability to take initiative to eliminate barriers and uses resources to ensure desired results · Ability to lead teams through conflict, clarify objectives, and develop consensus and buy-in as required · Ability to see the big picture and advocate integration of systems within the work group · Uses business knowledge to assist others in understanding business decisions and their impact · Fosters an environment that promotes creativity and innovation · Self-motivated with good communication skills · Able to work without appreciable management oversight and direction

Job Description Position Title: Aircraft Mechanic Salary: $35,000/year starting. Performance based raises. Benefits: FES Staff Aircraft Rental Rate, Sick Pay Schedule: Monday-Friday. 7am-4pm, with one hour lunch break. Occasional weekend help. Location: Glendale Municipal Airport, Arizona (KGEU), and satellite locations support Description: Fly Eagle Sport is a fast growing flight school in the Phoenix, AZ area. We are seeking an A&P mechanic to manage and maintain a fleet consisting primarily of Remos GX- Light Sport Aircraft. Additional aircraft, both LSA and/or part 23 aircraft may be added in the future. The mechanic will report to FES management and work with staff to ensure all aircraft are in safe and legal flying condition. This position requires a mechanic that can accomplish self-driven work tasks, maintain an organized work environment, and is excellent at records/logbooks and reports. This position is best suited for someone that is looking to grow with a company and be a part of a booming segment in the aviation training industry. This position will grow with the company and is a vital part of our business. Starting pay is probationary but once this mechanic has proven they are a long term fit, raises will follow. Requirements: · Hold at least an A&P certificate · Have constant and positive attitude towards safety and a deep understanding of the responsibility entrusted to them as an aircraft mechanic · Conduct their work with integrity · Have excellent organizational skills · Security- Must ensure their work space and access to offices are locked when not in use · Possess teamwork, customer service skills, and treats their co-workers with dignity and respect · Solves problems timely and in accordance with proper procedures · Coordinate Maintenance items with other approved mechanics · Communicate effectively the fleet status and issues to FES management · Maintains clean logbooks and proper maintenance entries · Responds quickly to pilot discrepancies to return aircraft to service · Have their own basic set of tools · Be able to follow manufacturer's guidance on routine maintenance and repairs · Be able to move aircraft by hand and conduct general aircraft servicing · Conduct Condition (LSA) and 100-Hour Inspections on fleet aircraft · Occasionally maintain other non-aviation company assets (fuel trailer, golf cart, other vehicles, etc) · Work with local IAs for Annual Inspections on company aircraft · Generate monthly aircraft usage reports for business partners and city requirements · Composite construction/repair skills · Troubleshoot avionics · Calibrate avionics and instruments · Maintain tools and parts accountability at all times · Perform standard part 91 equipment inspections · Occasionally travel (drive or fly) to our other locations to fix aircraft that can’t be flown to our maintenance facility · Be highly productive and goal oriented in a self-driven environment · Can send/receive parts and material shipments for the company · Must take pride in their workplace, keeping tools and parts clean, organized, and labeled. · Must take pride in our workplace, keeping aircraft service items available to customers and help to maintain a clean working environment. · Be resourceful in finding and purchasing aircraft parts and equipment · TSA Flight School Security Awareness Training must be completed yearly Potential Hazards: The job applicant should know and be familiar with potential hazards associated with aircraft maintenance. They will be required to use proper personal protection to prevent injury. Hazards may include but are not limited to: · Loud engine noise · Hot and cold working environment temperatures · Hot and cold parts/material handling · Composite materials, chemicals, and tooling · Sharp objects/tools, aircraft material dust, particle projectiles from grinding/sanding etc. · Machinery and mechanical equipment that can crush, pinch, cut, etc · Lifting heavy objects by hand or by machine · Spinning propellers and other aircraft related operational hazards · Use of ladders or other elevated work · Hazardous fumes: exhaust, chemicals fumes, etc. · Hazardous liquids: oils, gas/fuel, cleaners, lubricants, etc. FES expects and requires the job applicant to use goggles, safety glasses, face shields, ear protection, aprons, gloves, safety harnesses, breathing equipment and any other suitable protective equipment to meet the hazards of any job performed. Preferred Qualifications: · Prefer at least one year of shop experience · Prefer Rotax engine experience/certifications · Prefer flight school fleet experience · Prefer Light Sport Aircraft experience · Prefer holding a Private Pilot Certificate or greater (or can obtain one with us) · Prefer a mechanic that wants to stay long term and grow with this company!

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionLHH is partnering with a large construction company in search of a Senior Estimator for their Tempe, AZ location. In this role, you will have the opportunity to lead high-value estimating efforts for large-scale projects across hard bid/lump sum, construction management and design-build deliver models. They are seeking someone with a deep understanding of commercial concrete structures. This is a direct hire job that offers a salary paying between $140K - $170K base. Here are some more details about this role: RESPONSIBILITIES • Detailed analysis of isometric, as-built and engineering drawings for hard-bid/lumpsum, construction management and large design build projects, • Creates critical path schedules including milestone dates and completion of timelines that satisfy the contract requirements, • Take-offs, materials, construction equipment pricing - ensuring bids validity and price escalationQUALIFICATIONS, • Someone coming from commercial concrete structures such as data-centers, higher education or aviation, • Bachelor's degree in related disciplines or trade experience, • 10+ years of progressive construction cost estimating with at least 12 months of onsite expBENEFITS, • Employee ownership opportunities that build long-term value and commitment, • Discretionary annual bonuses opportunities Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinancePay Details: $140,000.00 to $170,000.00 per year Search managed by: Amy Schwister Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDescription: The Certified Flight Instructor (CFI) is responsible for providing high-quality flight and ground instruction to student pilots in accordance with FAA regulations and company training standards. CFIs play a critical role in developing safe, competent pilots while supporting the overall training experience and operational excellence of the organization. This position requires a strong commitment to safety, professionalism, student success, and adherence to company policies and FAA regulations. Essential Duties & Responsibilities • Provide flight instruction to students in accordance with FAA regulations and company training standards., • Conduct pre-flight and post-flight briefings to support student learning and progression., • Evaluate student performance and provide constructive feedback to support continuous improvement., • Ensure all training is conducted in a safe, professional, and structured manner., • Provide ground instruction covering aeronautical knowledge required for certification., • Prepare students for FAA written exams, oral exams, and practical tests., • Maintain accurate training records, endorsements, and student progress documentation., • Monitor student progression and communicate concerns with leadership., • Ensure all required endorsements and logbook entries are completed in compliance with FAA requirements., • Adhere to all FAA regulations, company policies, and safety procedures., • Participate in the company’s Safety Management System (SMS) by identifying and reporting safety hazards or concerns., • Ensure aircraft are operated safely and in accordance with operating limitations and procedures., • Coordinate with dispatch and other instructors to manage aircraft scheduling and student training needs., • Maintain availability and schedule consistency to support student progression., • Support operational efficiency while prioritizing safety and training quality., • Promote a positive training culture that reflects the organization’s commitment to excellence., • Maintain professional appearance and conduct in accordance with company standards., • FAA Certified Flight Instructor (CFI) Certificate (required), • Commercial Pilot Certificate for Airplane Single Engine Land or Multi-Engine Land (required), • Instrument Airplane Rating (required), • Valid FAA Class II or Class I Medical Certificate, • Strong communication and instructional skills, • Ability to mentor and coach student pilots effectively, • Strong commitment to aviation safety and regulatory compliance, • Professional judgment and decision-making ability, • Ability to manage multiple students and training schedules, • Strong organizational and documentation skillsRequirements:

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Role We are seeking a highly skilled and experienced Electrical Engineer to join our team. The Electrical Engineer will be responsible for designing, developing, and overseeing the implementation of electrical systems and components. Our ideal candidate is self-motivated, goal-oriented, and driven to accomplish department goals. This is an opportunity for a long-term position and to join a growing company. Responsibilities • Generate construction documents via AutoCAD including electrical site plans, single line diagrams, and detailing, • Prepare and procure all appropriate permits for building and construction in appropriate jurisdiction, • Review contractor product shop drawings, • Responding to contractor requests for information, • Conduct field investigations of existing conditions for accurate design implementation as well as during construction to assure product quality, • Preparation of project close out and as-built documentation, • Research and Development of methods and product types to enhance project delivery model., • Development of company engineering standards of design, • Prepares product reports by collecting, analyzing, and summarizing information and trends, • Maintains product and company reputation by complying with federal and state regulations Qualifications • 4 years’ experience as an Electrical Engineer (not required but preferred), • Minimum BS in electrical engineering from an accredited college or university, • Proficiency in Microsoft products, particularly Office (Excel, Word, Email), • Skilled in BIM and use of Autodesk products, particularly AutoCAD, • Able to utilize Adobe Acrobat software, • Excellent verbal and written communication skills, • Exceptional time management, accountability, and prioritization skills, • Self-motivated, goal- oriented, and driven to accomplish department goals, • Ability to be organized, problem solve, and be solution oriented, • Ability to support a fast paced, demanding work schedule; could include late evenings and/or weekends Compensation and Benefits • 10 Paid Holidays, • Flexible Time Off, • 401(k) Company Match, • Health, Dental, and Vision Insurance, • HSA and FSA, • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP)

Job DescriptionDirector, Supply Chain Management Phoenix, AZ | 100% Onsite Healthcare & Aviation A national, mission-driven organization operating at the intersection of healthcare and aviation is seeking a Director of Supply Chain Management to lead complex, safety-critical supply chain operations. This is a senior, Director-level role overseeing enterprise-wide supply chain strategy and execution across both aviation maintenance components and clinical/medical supplies within a highly regulated, decentralized environment. What You'll Do • Lead end-to-end supply chain operations including sourcing, procurement, inventory, logistics, repair/warranty, and vendor management, • Oversee supply chains supporting aviation equipment and parts as well as healthcare/clinical supplies, • Standardize and optimize supply chain processes across multiple operational locations, • Drive forecasting, inventory planning, and cost-effective sourcing strategies, • Build and manage supplier relationships and performance metrics, • Lead, develop, and scale a large, multi-layered supply chain team, • Partner closely with senior leadership in a safety-first, mission-critical environmentWhat We're Looking For, • Bachelor's degree required; Master's strongly preferred, • 10+ years of progressive supply chain leadership experience, • Mandatory industry experience in Healthcare or Aviation (healthcare strongly preferred; both ideal), • Proven Director-level leadership experience (not a manager seeking promotion), • Strong financial, analytical, and executive communication skills, • Experience driving large-scale process improvement and organizational changeWhy This Role, • Direct impact on emergency medical and aviation operations, • High-visibility leadership role with national scope, • Opportunity to modernize and influence complex supply chain systems, • Mission-driven culture with a strong safety-first mindsetAdditional Details, • Reports to a senior executive leader, • Manages 15-20 direct reports; total team size 30+, • 100% onsite with flexible start times (6-3 / 7-4 / 8-5), • Background check, credit check, and drug screen requiredPay Details: $126,000.00 to $188,000.00 per year Search managed by: Nate Padia Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDescription: Cutter Aviation has an immediate need for an energetic and knowledgeable aviation professional to serve as Pilot-in-Command [PIC] of a new PC-24 Pilatus based at our Phoenix Sky Harbor location. This position will involve single pilot operations supporting the owners travel requirements as well as charter flying. As PIC, you will be the primary face of Cutter Aviation and must be an exceptional relationship builder and communicator with the drive to provide world-class customer service to the owner and our clients. The position also will require you to liaison with Cutter Flight Management regarding all phases of aircraft operations and support. He/she is the external representative of our company to our A/C owners, operators, business partners, and to the business aviation community. Key Duties and Responsibilities: • Desire to provide world-class service., • Uncompromising commitment to Safety., • Adhere to a fixed 15 day schedule with flexibility and willingness to cover on demand operations., • Ability to adapt to rotating schedules and short notice callouts., • PIC on the PC-24 in Part 91 and 135 on-demand charter operations., • Follow established procedures for reporting irregularities during flights, ground checks, and maintaining records., • Ensuring compliance with FAA regulations pertaining to actual flight, qualifications, currency and fitness for flight as well as aircraft compliance., • Previous Turbojet Type Rating and/or Turboprop experience preferred., • Multi-Engine Airline Transport Pilot Certificate., • Current 1st Class Medical or ability to qualify for one., • No accidents, incidents or sanctions in the past 5 years., • Knowledge of general aviation aircraft and their service requirements plus the needs of crews and passengers., • Excellent customer service, organizational, and communication skills., • Ability to train an SIC pilot to properly perform their functions., • A sincere desire to assist customers and be part of a team., • Self-starter with the ability to work independently., • Excellent ability to multi-task., • Preference will be given to candidates with:, • 3000 Total Time hours, • 1500 PIC Hours, • 250 PIC Hours in turbine powered aircraft, • Previous experience in on demand charter operations, • Clean driving record., • Able to pass a background check., • Ability to pass a drug screening test., • Attention to detail., • Able to develop a friendly rapport., • Persistence in the face of obstacles., • Professional in appearance and mannerisms., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace.

Job DescriptionSenior Estimator – Heavy Civil / Highway Phoenix, Arizona | Office-Based | Full-Time Build Big. Win Work. Lead the Numbers. We're looking for a Senior Heavy Civil Estimator who wants more than just putting numbers together—you want to own bids, influence strategy, and help win complex infrastructure projects. In this role, estimating is not back-office support—it's a core driver of growth and competitive advantage. You'll partner with leadership, project teams, and operations to deliver accurate, strategic, and winning bids across Arizona's most impactful infrastructure projects. What You'll Do: * Analyze plans, specs, and geotechnical reports with a risk-first mindset * Perform site visits and pre-bid evaluations * Define self-perform vs subcontracted scopes * Build and distribute subcontractor and supplier bid packages * Develop complete estimates using HCSS HeavyBid (takeoffs, assemblies, logic) * Evaluate subcontractor/vendor pricing and make award recommendations * Lead bid reviews, challenge assumptions, and refine strategy * Collaborate with leadership to position bids for profitability and success What We're Looking For:Experience * 5+ years of heavy civil / roadway estimating experience * Proven experience with: * Mass grading & earthwork * Concrete structures * Asphalt paving & aggregates * Transportation infrastructure projects * Aviation project experience (runways, taxiways, aprons) is a strong plus Technical Skills * HCSS HeavyBid (required) * Experience with tools such as: * AGTEK * OST * Primavera P6 * Advanced Excel Education * Bachelor's degree in: * Civil Engineering * Construction Management * Or equivalent experience What Sets You Apart * You've led bids, not just supported them * You think strategically about risk, pricing, and competitiveness * You're confident presenting to executives and project teams * You thrive in a fast-paced, high-performance environment * You bring a win the work mindset Why This Role * Lead estimating on large-scale, complex infrastructure projects * Work alongside leadership that values your expertise and input * Be part of a team that executes what you sell * Strong backlog and long-term stability * Clear growth path into leadership or preconstruction roles Additional Details * Full-time position based in Phoenix, AZ * Relocation support may be available for the right candidate * No visa sponsorship available Apply Today If you're ready to take ownership of bids, influence outcomes, and build meaningful infrastructure, we want to connect with you. #HeavyCivil #EstimatorJobs #ConstructionCareers #CivilEngineering #HCSSHeavyBid #Preconstruction #PhoenixJobs #ArizonaJobs #Infrastructure #RoadwayConstruction #DOTProjects #AviationConstruction #NowHiring #ConstructionJobs #BuildTheFuture #EstimatingJobs #JoinOurTeam

Job Description Job Summary Define the future of aviation. Join Cirrus Aircraft’s team to build the greatest transformation in aviation since the jet engine. certifiable flight technologies to bring simple and safe personal flight to the masses. The Advanced Development Group is a small and nimble team that researches, designs, and tests concepts using rapid, unconstrained set-based design methodologies. The scope of our projects ranges from feature development to end-to-end systems and proof of concept aircraft, spearheading the next products. Look no further, the future of aviation is here. Join our innovative company today. Duties and Responsibilities/Essential Functions • Conduct on-aircraft system integration and validation testing., • Performs fluid dynamics, aircraft performance, and stability and control., • Research, implement, and evaluate software algorithms., • Must be able to independently design and execute bench, ground, and flight tests, and analyze and present results., • Design, execute, and present trade studies pertaining to data, software, and network architecture., • Contribute towards overall architecture and strategy for the advanced flight systems., • Collaboration with electrical and mechanical engineering to achieve fully integrated systems will be required. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Required Education and/or Experience: • Bachelors degree in Aerospace or Mechanical Engineering required., • 6-10 years’ experience in a related field, • Proficient in a professional environment developing MATLAB / Simulink control systems, • Proficient in fluid dynamics, aircraft performance, and stability and control., • Proficient with engineering drawings, CAD software, and engineering configuration management., • Strong communication skills: Be able to concisely document and explain workflows and design choices., • Maintain clear documentation and collaborate with cross-functional teams to align data engineering tasks with broader project goals., • Comfortable in driving results under uncertainty during the earlier stages of development, • Advanced degree in Aerospace or Electrical Engineering., • Experience generating system and simulation models., • Experience troubleshooting and implementing solutions for aerodynamic challenges such as drag, cooling, stability and control, and slow speed handling., • Experience with developmental flight testing., • Experience with physics-based 6DOF simulations., • Experience with configuration and layout of new aircraft., • Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces To perform the job successfully, an individual should demonstrate the following competencies: • Directs Work: Provides direction, delegates, and removes obstacles to get work done., • Situational Adaptability: Adapts approach and demeanor in real time to match shifting demands of different situations., • Manages Complexity: Makes sense of complex, high quantity, and sometimes, contradictory information to effectively solve problems., • 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting., • Employer-Paid Coverages: Group term life, short- and long-term disability insurance., • Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options., • Free Health Tracking: With rewards for meeting health goals., • Generous PTO: 160 hours accrued within the first year., • Employee Referral Bonus: For referring talented candidates., • Career Development: Tuition reimbursement and professional growth opportunities., • Exclusive Discounts: Access to partner and marketplace discounts. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Job DescriptionDescription: Position Summary: Cutter Aviation has an immediate need for an energetic and knowledgeable aviation professional to serve as Pilot-in-Command [PIC] of a new HondaJet HA420 based at the John Wayne-Orange County Airport in California. This position will involve single pilot operations supporting the owners travel requirements as well as charter flying. This is a remote position and as such, the PIC will be the primary face of Cutter Aviation and must be an exceptional relationship builder and communicator with the drive to provide world-class customer service to the owner and our clients. The position also requires on-site management and liaison with Cutter Flight Management regarding all phases of aircraft operations and support. He/she is the external representative of our company to our A/C owners, operators, business partners, and to the business aviation community. Key Duties and Responsibilities: • Desire to provide world-class service., • Uncompromising commitment to Safety., • Ability and willingness to be available 24/7 year-round., • Ability to adapt to rotating schedules and short notice callouts., • PIC on the HA420 HondaJet in Part 91 and 135 on-demand charter operations., • Follow established procedures for reporting irregularities during flights, ground checks, and maintaining records., • Ensuring compliance with FAA regulations pertaining to actual flight, qualifications, currency and fitness for flight as well as aircraft compliance., • Multi-Engine Airline Transport Pilot Certificate., • Previous Turbojet Type Rating and/or Turboprop experience preferred, • Current 1st Class Medical or ability to qualify for one., • No accidents, incidents or sanctions in the past 5 years., • Attention to detail., • Ability to lift 50 lbs., • Excellent Ability to Multi-Task., • Able to develop a friendly rapport., • Professional in appearance and mannerisms., • Self-starter with the ability to work independently., • A sincere desire to assist customers and be part of a team., • Ability to train an SIC pilot to properly perform their functions., • Preference will be given to candidates with:, • 3000 Total Time hours, • 1500 PIC Hours, • 250 PIC Hours in turbine powered aircraft, • Previous experience in on demand charter operations, • Clean driving record., • Able to pass a background check., • Ability to pass a drug screening test., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Reliable, responsible, and dependable in fulfilling obligations., • Sensitive to others' needs and feelings and understanding and helpful on the job., • Pleasant with others on the job and displays a good-natured, cooperative attitude., • Maintains composure, keeps emotions in check. Avoids aggressive behavior even in very difficult situations.

Job DescriptionDescription: Who we are: Advanced Air, LLC is an innovative, service-oriented aviation company headquartered in Phoenix, Arizona. We were founded in 2005 by our President, Levi Stockton, as an FAA approved, Part 135, On-Demand Air Carrier focused on superlative aircraft management and on demand charter. Today, Advanced Air has 22 aircraft, operated in both scheduled and on-demand service, and a diversified portfolio of flying services in turboprop aircraft, business jets and regional passenger jets. Serving more than 13 communities in the southwestern United States, Advanced Air has a deep commitment to operational excellence and metered, sustainable growth. Our successful growth is driven by our adherence to our core values, safety, security, teamwork and reliability. We are in this business for the long run and take a disciplined, thoughtful approach to growth opportunities. About the role and about you: This position is for Second in Command (SIC) of a turbo-prop King Air 350 based out of Phoenix, Arizona and requires a strong ability to multi-task, making high level complex decisions while completing a variety of aviation related tasks. The flying for this position will support the Advanced Air Essential Air Service communities and on-demand charter. The main objective is to provide Advanced Air travelers a world class experience in a fleet of King Air 350’s. While holding up to the standards of Advanced Air, LLC flight operations, interacting with all charter customers, aircraft owners, and airline passenger travelers. What you will do: • Assist the pilot-in-command during all phases of flight in accordance with operating policies and procedures., • Perform a visual pre-flight (walk-around) inspection prior to each flight., • Perform a visual post-flight (walk-around) after each flight., • Assume primary responsibility for the safety of the passengers, crewmembers, cargo, and the aircraft should the pilot-in-command become incapacitated or unable to perform his/her duties., • Have primary operational responsibility for successfully completing the customer service portions of each leg as outlined in the policies and procedures manual., • Review thoroughly and brief the pilot-in-command specifically on all customer service items including, but not limited to passenger pick up, passenger drop off, refueling, customs, private hangar pick up/drop off, private hangar communications requirements, and passenger catering., • Comply with all Federal Aviation Regulations, Company Operations Manual, Operations Specifications, Standard Operating Procedures, and Company Policies and Procedures, • INITIAL NEW-HIRE Consists of all ground training curriculum segments in their entirety, with the aircraft ground being specific to the type(s) of aircraft in which the airman is to qualify. The flight training will cover all required events and maneuvers with none being waived by the qualified flight instructor., • Update flight and duty records, determine eligibility for the next flight assignment and ensure any aircraft maintenance discrepancies are reported to the Captain and reported in accordance with operating policy and procedure, • High school diploma or GED., • 1100 hours total time, 500 PIC, 50 hours multi-engine fixed wing, Commercial Airplane Multi Engine Land, • 500 hours cross-country flight time; 100 hours nighttime, 75 hours instrumental flight time of which 50 were in actual flight., • CFI, CFII, MEI Certificates, preferred but not required., • Successfully pass oral/written exam administered by FAA approved Advanced Air, LLC Check Airman, or a representative of the Administrator within the preceding 12 calendar months as required by FAR 135.293(a), • Successfully complete competency check administered in the type of airplane within the preceding 12 calendar months conducted by a FAA approved Advanced Air, LLC Check Airman or an FAA Inspector, as required by FAR 135.293(b), • Must have completed the 6-month IFR proficiency check given by an FAA inspector or a FAA approved Advanced Air, LLC Check Airman (FAR 135.297), • Demonstrated enroute, arrival and departure procedures by completing an enroute check (FAR 135.299) with an FAA inspector or a FAA approved Advanced Air, LLC Check Airmen, • Must be Knowledge of Federal Aviation Administration rules and regulations., • Must be Knowledge of aircraft maintenance procedures., • Must have Customer/Client Focus, • Must be able to have ability to multi-task., • Must be proficient in MS Office suite (Word, Excel, and Outlook), • Must be able to work flexible schedule, including nights, weekends, and holidays., • Must be able to pass FAA drug/alcohol screening, background checks and submit to random drug test when required., • Maintain a current medical certificate as required by the company., • Ability to work in confined spaces., • Ability to manipulate, push, pull, and lift heavy objects more than 150 lbs., • Ability to climb onto and off an airplane wing as part of the preflight, post flight, or during an over wing emergency exit., • Digital dexterity for aircraft preflight and post flight, • Ability to execute flights of up to 4.5 hours up to a total flight time of 10 hours per day during a 14-hour duty period. What you can expect: • SICs will a compensated at a salary rate of $55,000.00., • Training contract will be required for 12 months from date of completion of initial training., • Flight Crews will work a mixed schedule of Days ON and Days OFF that will generate 10 days off a month. We can tell you all about how great we are, but you probably want to know what is in it for you, so we have compiled a list of our standout benefits: • 401k plan with dollar-for-dollar employer match up to 4%, • 100% Company Paid Health Insurance including Medical, Dental, Vision and $15,000 in life insurance for yourself., • KCM for your personal travel, • Day Off Pay at 200% ($200 per HDO flown), • Hourly Bonus for Flight hours over 65 in a month ($50 p/h 65+), • $2.45 Per Diem pay for all hours associated with Flight Duty The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently stooping, climbing, bending, kneeling, lifting (minimum 50 lbs.) and operating machinery with repetitive motions. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work environment includes working outdoors and in all weather conditions. May incur exposure to constant or intermittent sounds of a pitch or level significant enough to cause marked distraction or possible hearing loss while performing operations on the airfield ramp. Exposure to fumes, dust, loud noise, and or outdoor weather conditions. Selection Guidelines: Formal application, rating of education and experience; oral interviews and reference check; job related tests may be required. The duties listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the position. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.

Job DescriptionDescription: Cutter Aviation is searching for an energetic and knowledgeable Shares Ownership & Managed Sales Executive. The position will function as the primary face of Cutter Aviation and must be an exceptional relationship builder with the drive to provide world-class customer service. As the external representative of our company. The individual will seek to firmly establish Cutter and themselves as the target market’s first choice for charter and aircraft management services. KEY DUTIES AND RESPONSIBILITIES • Use a computerized flight scheduling system to understand aircraft availability, • Maintain positive relationships with owners and clients and managed customers, • Direct contact with clients and owners, • Develop and negotiate aircraft management contracts for Part 135 and Part 91 Fleets., • Develop and build working relationships with new and existing customers in order to understand their requirements for aircraft ownership and management., • Develop, implement and refine an effective marketing strategy., • Prepare and deliver comprehensive responses to Requests for Proposal (RFP)., • Develop Sales campaigns based on market characteristics., • Work with the company President and Flight Manager to formulate and coordinate programs to promote services., • Represent the company at trade exhibitions and networking events., • Monitor industry trends that may affect business strategies., • Stay up to date on competitor activity to identify business opportunities., • Promote and sell charter block-time products., • Must have experience in the sale of aircraft and/or charter services., • Must have experience in the listing and selling of turbine powered aircraft., • Must have experience in negotiating sales contracts, agreements and partnerships., • Must demonstrate good judgment in balancing the needs of the customer with the needs of the company., • Proven ability to interact in a team environment and work effectively with peers to accomplish objectives., • Must be a self-starter able to operate with minimal supervision., • Excellent oral and written communication skills., • Proven ability to manage concurrent projects and prioritize objectives, maintain focus and demonstrate a results-oriented work ethic., • Must be willing to travel (approximately 25-50%), • Must have strong computer skills, • Must be detailed oriented, organized and possess the ability to multitask under pressure of deadline, • Possess proven skills in developing and maintaining customer relationships, • Professional in appearance and mannerisms, • Able to develop a friendly rapport, • Have a sincere desire to assist customers, • Active listening skills., • Must possess a sense of urgency and the ability to meet critical timelines., • Must be self-motivated and be able to work with little or no supervision and to be able to see "the big picture" with respect to efficiency and profitability., • Able to pass a drug screening test, • Able to pass a background check, • Attendance and Dependability: Employee must report to work at the scheduled time and seldom be absent or late. Employee must be able to complete work in an accurate, timely, thorough manner and be conscientious about assignments. Routinely exhibits a sense of urgency to get the job done., • Communication and Contact: Employee must communicate effectively both verbally and in writing with customers, colleagues and superiors. Must maintain strict confidentiality when dealing with sensitive information. Must be friendly, courteous and helpful at all times., • Relationship with Others: Employee must work effectively and relate well to others including superiors, colleagues and customers. Must consistently exhibit a positive and professional attitude when interacting with others. Must maintain constructive working relationships and seek to promote good employee morale., • Meeting Business Goals and Objectives: Employee must be able to set goals and objectives for themselves and to meet or exceed goals set by senior management.

Job DescriptionDescription: Position Summary: Cutter Aviation has an immediate need for an energetic and knowledgeable aviation professional to serve as Pilot-in-Command [PIC] of a new PC-12 Pilatus based at our Phoenix Sky Harbor location. This position will involve single pilot operations supporting the owners travel requirements as well as charter flying. As PIC, you will be the primary face of Cutter Aviation and must be an exceptional relationship builder and communicator with the drive to provide world-class customer service to the owner and our clients. The position also will require you to liaison with Cutter Flight Management regarding all phases of aircraft operations and support. He/she is the external representative of our company to our A/C owners, operators, business partners, and to the business aviation community. Key Duties and Responsibilities: • Uncompromising commitment to Safety, • Desire to provide world-class service, • PIC on the PC-12 in Part 91 and 135 on-demand charter operations., • Ability and willingness to be available 24/7 year round., • Ability to adapt to rotating schedules and short notice callouts., • Ensuring compliance with FAA regulations pertaining to actual flight, qualifications, currency and fitness for flight as well as aircraft compliance, • Follow established procedures for reporting irregularities during flights, ground checks, and maintaining records, • Commercial and Instrument (ATP Preferred), • Previous Turbojet Type Rating and/or Turboprop experience preferred, • Current 1st Class Medical or ability to qualify for one., • No accidents, incidents or sanctions in the past 5 years., • Knowledge of general aviation aircraft and their service requirements plus the needs of crews and passengers., • Self-starter with the ability to work independently., • Ability to train an SIC pilot to properly perform their functions., • A sincere desire to assist customers and be part of a team., • Excellent customer service, organizational, and communication skills., • Professional in appearance and mannerisms., • Able to develop a friendly rapport., • Attention to detail., • Excellent ability to multi-task., • Multi-Engine Airline Transport Pilot Certificate, • 1200 Total time Hours, • 500 Cross Country, • 100 night, • 75 instrument (50 of which were in actual flight), • Previous experience in on demand charter operations, • Ability to pass a drug screening test, • Able to pass a background check, • Clean driving record, • Pleasant with others on the job and displays a good-natured, cooperative attitude, • Reliable, responsible, and dependable in fulfilling obligations, • Maintains composure, keeps emotions in check. Avoids aggressive behavior even in very difficult situations., • Accepts criticism and deals calmly and effectively with high stress situations. Open to change (positive or negative) and to considerable variety in the workplace., • A willingness to take on responsibilities and challenges, • Sensitive to others' needs and feelings and understanding and helpful on the job, • Persistence in the face of obstacles

Job Description Job Title: Commercial Manager - Aerospace, Defense, Industrial Company: Custom Control Sensors, LLC Location: Phoenix, AZ Employee Type: Full Time Exempt Industry: Manufacturing Job Type: Sales Education: Bachelor’s degree required, Technical BS degree preferred Experience: 10 years minimum with proven management experience. Company Overview Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS' Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS' Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001-2008 and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our Company's success. Benefits: • Medical, • Dental, • Vision, • 401k with Match, • Employer funded Life Insurance, Short-term Disability, and Long-term Disability, • Paid Sick and Vacation Leave, • 9 Paid Holidays Commercial Manager – Aerospace, Defense, Industrial The Commercial Manager is responsible for company-wide sales execution and performance management, supporting revenue growth, pricing execution, KPI reporting, and sales operations leadership across Custom Control Sensors’ Aerospace, Defense, and Industrial divisions. This role provides day-to-day commercial leadership and coordination to ensure consistent execution, disciplined pricing, accurate forecasting, regulatory compliance, and effective management of global distribution and sales teams. The Commercial Manager partners closely with Sales leadership and executive stakeholders, Engineering, Operations, Finance, Quality, Export Compliance, and Marketing to translate commercial strategy into measurable results while supporting scalable growth and customer satisfaction across all served markets. Key ResponsibilitiesRevenue Ownership & Sales Execution • Drive and support sales revenue performance across Aerospace, Defense, and Industrial markets in alignment with company growth and profitability objectives., • Drive consistent, technically informed, consultative selling practices across all sales teams and channels., • Ensure disciplined opportunity management, quotation accuracy, and order conversion across global customer base and distribution network., • Partner with outside sales and divisional leaders to execute account strategies, program pursuits, and backlog growth initiatives., • Demonstrate strong business judgment and analytical thinking, including ROI and business case development.Sales Organization Leadership, • Lead and develop assigned sales support and execution teams, ensuring clear roles, accountability, and consistent processes., • Define workflows, performance expectations, and operating cadence to support scalability and efficiency., • Maintain and continuously improve Sales work instructions and procedures., • Coordinate and complete multi-departmental completion of key customer surveys., • Foster collaboration between Sales, Engineering, Operations, Quality, Export Compliance, and Marketing teams., • Promote a disciplined, customer-focused, and compliant sales culture.Pricing Strategy & Commercial Governance, • Coordinate, implement, and administer pricing strategies aligned with margin targets, market dynamics, and competitive positioning., • In collaboration with outside Sales Managers and Sales / Finance leaders, oversee and maintain global price lists, discount structures, customer-specific pricing agreements, long term agreements / contracts, and pricing approval processes., • Analyze pricing performance, margin trends, and win/loss data; provide recommendations to senior leadership.KPI Oversight, Forecasting & Performance Management, • Monitor and report sales KPIs including revenue attainment, pipeline health, quote-to-order conversion, margin performance, and distributor effectiveness., • Manage and facilitate sales forecasting processes to ensure alignment with production planning, inventory management, and financial reporting., • Drive accountability through regular performance reviews, KPI dashboards, and corrective action plans.Global Distribution & Channel Management, • Provide operational oversight and performance management of CCS’s global distributor network across all divisions., • Ensure distributors are supported with pricing, product information, technical documentation, and training resources., • Monitor distributor performance and recommend corrective actions, development plans, or strategic changes as needed., • Support distributor selection, onboarding, and training. Export Compliance & Regulatory Oversight (ITAR, EAR/BIS), • Ensure sales activities fully comply with U.S. export control regulations, including ITAR, EAR, and BIS requirements., • Oversee sales processes involving controlled technical data, drawings, specifications, and services, ensuring proper authorization, licensing, and access controls., • Ensure customer, end-use, end-user, and destination screening requirements are incorporated into sales and distributor processes., • Support export-related audits, internal reviews, and regulatory inquiries; ensure accurate documentation and record retention., • Train, coach, and hold Sales personnel and channel partners accountable for export compliance awareness and adherence., • Support risk assessment and mitigation efforts related to export compliance when entering new markets, geographies, customer segments, or distributor relationships.Marketing, Brand Positioning & Market Presence, • Provide tactical and operational oversight of Sales-aligned marketing initiatives, ensuring consistent messaging, positioning, and brand representation across all served markets., • Partner with internal and external resources to develop and execute digital marketing initiatives, including website content, SEO/SEM, email campaigns, and approved social media activity., • Coordinate and support planning and execution of industry tradeshows and customer events, including booth strategy, messaging, lead capture, and post-event follow-up., • Ensure marketing activities are aligned with CCS’s target markets, product strategy, and growth objectives., • Oversee development of sales and marketing collateral, including presentations, product literature, and proposal support materials., • Ensure all marketing materials and outreach activities are technically accurate, export-compliant, and appropriately controlled.Cross-Functional & Market Engagement, • Serve as a key commercial interface between customers, distributors, and internal CCS teams., • Ensure customer requirements, contractual obligations, and delivery expectations are clearly communicated through contract review., • Maintain awareness of market trends, competitive developments, and customer needs across Aerospace, Defense, and Industrial markets.Skills and Requirements, • Must be ITAR compliant; strong working knowledge of U.S. export control regulations (ITAR, EAR/BIS) required., • Bachelor’s degree required; Engineering or Business degree preferred., • Minimum ten (10) years of experience in technical sales leadership or commercial operations within Aerospace, Defense, and Industrial manufacturing environments., • Demonstrated experience supporting revenue performance, pricing execution, forecasting, and KPI-driven performance management., • Proven experience managing global sales teams, distributor networks, and channel partners., • Strong financial and analytical acumen with demonstrated margin management capabilities., • Excellent leadership, communication, and organizational skills with the ability to influence cross-functional stakeholders., • Proficiency with CRM, ERP, and Microsoft Office tools; advanced Excel skills preferred., • Ability to represent CCS professionally and effectively in customer, distributor, regulatory, and internal engagements., • Moderate travel may be required to support key business reviews, distributor meetings, tradeshows, or customer engagements. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is continuously required to sit, talk or hear, and flex and extend fingers with opposition of thumb; palmar grasp. The employee is frequently required to stand, walk, bend, reach with hands and arms, and move within all areas of the facilities and parking lots. The employee is occasionally required to bend, turn push, pull, and kneel. A computer is used to access, input, and retrieve data. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state or local law NO RECRUITMENT OR STAFFING AGENCIES

Job DescriptionDescription: Position Summary: Avionics Technicians are responsible to the Avionics Supervisor and shall assure that the procedure outlined in the repair station manual as well as all FAA Regulations and manufacturer’s instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, repairs, troubleshooting, modification of aircraft systems, and installations. In addition, component removal and reinstallation, operational checks, and leak checks are all within the responsibility of the avionics technician. The avionics technician is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: • Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator., • Responsible for following the coordinated activities of their shop or area, so as to minimize delays and increase production and efficiency., • Ensure that all work accomplished will be completed in strict accordance with the manufacturer’s maintenance and repair instructions and TITLE 14 CFR part 43., • Exercise all reasonable care to protect all parts-sub assembles; major assembles and completed units against loss or damage., • Ensure that all applicable repair station forms utilized are properly completed., • Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times., • Ensure that proper tools and equipment are available, and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. The technician will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate., • Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department., • Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders., • Communicates with the avionics supervisor concerning progress of the assigned work., • Perform airframe electrical, avionics repairs, inspections, installations and modifications., • Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system., • Interpret technical manuals, drawings and blueprints., • Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc…, • Displays and promotes a positive attitude toward work and other employees., • Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect., • Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks., • Technicians shall have all their work inspected (except for off-site repairs, see off-site maintenance requirements) by an appropriately rated inspector as listed on the “Roster of Management Supervisory and Inspection Personnel” at the completion of each task., • Participates with management to strategize and implement new maintenance tactics., • Provide leadership and communication to other fellow employees. This work requires the following physical activities. • Must have High School Diploma or GED, • Airframe and Powerplant (A&P) Certificate (preferred), • Federal Communication Commission (FCC) License (optional), • Strong understanding in 145 repair station operations/regulations required., • Clean driving record., • Able to pass a background check., • Results oriented – Proven ability to achieve goals. Follow through and meet deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills., • Communication – Oral Communication – speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions. Written Communication – Writes material in clear concise terms., • Leadership – Exhibits confidence in self and to others; Inspires and motivates others to perform well; Effectively influences actions and opinions of others; Inspires respect and trust; Accepts feedback from other. Displays passion and optimism; Mobilizes others to fulfill the vision., • Computer – Knowledge of MS Office Software, AutoCAD, and Corridor. (preferred), • Attention to detail., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace.

Job Description About Acron Aviation (Avionics): Acron Aviation designs, engineers, and manufactures certified avionics systems that support safety‑critical flight operations across commercial and military aviation. Our avionics portfolio includes surveillance, recorders, displays, and related systems developed in regulated environments and deployed on aircraft worldwide. We partner closely with operators and OEMs to deliver reliable, certifiable technology throughout the full product lifecycle—from development and qualification through production and aftermarket support. At Acron Aviation, avionics engineering is rooted in technical rigor, operational discipline, and a customer‑first approach to execution. About our Surveillance Product Line: Acron Aviation’s Surveillance organization develops and sustains safety‑critical systems that enable aircraft awareness, collision avoidance, and airspace interoperability. Our surveillance portfolio includes ADS‑B, Mode S transponders, traffic collision avoidance, and integrated surveillance solutions deployed across commercial, military, and rotorcraft platforms. This work is performed in highly regulated environments. It requires deep expertise in systems, hardware, software, and RF across the full lifecycle—from requirements and certification through production and in‑service support. Surveillance engineering at Acron Aviation emphasizes technical rigor, disciplined execution, and close coordination with operators and OEM partners. Job Description: Acron Aviation is seeking an experienced Project Engineer to join our engineering team in our Surveillance product line. The Project Engineer (PE) manages the technical aspects of a specific project or effort and ensures technical, schedule, and cost targets are met. The PE is similar in nature to the Program Manager (PM), just more functionally focused, with the PM as its primary customer. The PE is both a project manager and a technical leader/expert. A PE’s duties are broad in nature and may encompass multiple phases of a product’s lifecycle, including pursuit, development, production, or post-delivery support. While possessing technical expertise and experience, the individual will coordinate and lead the engineering product development activities. The PE plans, schedules, and directs the engineering support of the assigned projects, and keeps the team on plan through proactive engagement, constant and robust communication/collaboration, and focused risk management. They are responsible for and have authority over all engineering resources associated with or in support of the project, and must continually engage and collaborate with engineering functional leadership to ensure the necessary resources and support are available. The PE musters, shepherds, and leads the engineering team to success, providing quality, error-free technical deliverables to the PM and Acron Aviation customers within the approved budget and schedule. The PE maintains open and clear communication with the PM, the engineering function, and assigned team members, suppliers, and customer(s). The PE is a leader in a vitally important role and accountable to the PM and the engineering leadership team. Essential Functions: • Partner with the PM and Integrated Product Teams (IPTs) to ensure the success of the program; technical, schedule, and cost targets are properly defined and met., • In drawing their support from the engineering function, the PE must constantly engage the other cross-functional leaders to advocate for the program’s needs and priorities while working with leadership to understand and accommodate the demands of competing programs., • Interface and work closely with the customer(s) on technical and contractual requirements. Anticipate and fulfill customer needs to ensure 100% customer satisfaction and continued business expansion; negotiate as required and obtain positive resolution., • Working in conjunction with PM and proposal lead to decompose business case and customer contract requirements into Work Breakdown Structure (WBS) elements, support creation of the detailed Basis of Estimates (BOEs), construct viable Integrated Master Schedule (IMS), determine technical deliverables and associated program risks and opportunities., • Responsible for requirements definition, verification, and distribution, technical baseline development, resource identification and allocation, design trade studies, preliminary design, detailed design, system testing, qualification testing, supporting the handoff to production (production configuration), and ensuring the technical deliverables to support a successful Entry-Into-Service., • Lead the technical development of the program. Serve as the focal point for all engineering development, product definition, resource allocation, task assignment and completion, problem solving, and decision making necessary to accomplish the project charter., • Direct the engineering team assigned to the program, manage their performance, and, through a matrix structure, oversee their participation within the program., • Effectively communicate with the PM and serve as a leader on the project team through a collaborative, trust-based relationship, ensuring all have the latest information available., • Strong knowledge of the job area typically obtained through advanced education combined with experience., • Proficient knowledge of the product lifecycle and obsolescence management., • Proficient knowledge of project management, including earned value and risk/scope management., • Bachelor’s Degree and minimum 9 years of prior relevant experience in project engineering., • Working knowledge of resource-loaded scheduling and proficient with the use of Microsoft Project 2016., • Experience with DO-178, DO-254, DO-160 and ARP-4754 product development.

Job Description Senior Aviation Maintenance Technician (A&P) – Training Fleet Location: Phoenix, AZ Employment Type: Full-Time, 5 days a week About Client A high-volume flight training operation running a general aviation fleet with active daily schedules. The organization offers four defined technician levels with structured pay growth, a collaborative maintenance team, and a strong emphasis on safety and aircraft availability. Compensation & Benefits * Base Salary: $36–$48/hour — Based on experience and qualifications (four defined technician levels) * Relocation Assistance: Available depending on the candidate * Shift: 10-hour shifts; day and night shifts available * Benefits Package: Full Medical, Dental, and Vision insurance; 401(k); Paid Time Off (PTO) Job Summary Oversee and execute both scheduled and unscheduled maintenance on a GA training fleet alongside instructors, maintenance leadership, and operations teams. Best suited for a detail-driven, safety-first mechanic who manages priorities well in a high-tempo training environment. Key Responsibilities * Conduct inspections, maintenance, troubleshooting, and repairs on flight school aircraft in accordance with FAA regulations and internal maintenance procedures * Locate and apply technical documentation including maintenance manuals, wiring diagrams, IPCs, Service Bulletins, and Airworthiness Directives * Record all completed maintenance with accuracy and return aircraft to service in an airworthy condition * Uphold a clean, well-organized, and safety-conscious work environment at all times * Keep maintenance staff, instructors, and management informed on aircraft status and anticipated maintenance timelines * Drive daily workflow by reorganizing task priorities around operational and training demands * Maintain scheduling flexibility across day, night, and 10-hour shifts as coverage requires Minimum Requirements * Active Airframe & Powerplant (A&P) Certificate (required) * Ability to obtain Inspection Authorization (IA) within three months of hire * Minimum 5 years of general aviation experience as a certificated A&P * High school diploma or equivalent (preferred) * Able to lift up to 50 lbs and sustain extended periods of standing, bending, kneeling, or stooping * Accustomed to standard aviation environments including fuel, solvents, aircraft noise, outdoor conditions, and hangar operations Ideal Qualifications * Experience with Piper aircraft preferred * G1000 avionics experience is a plus * Grounded knowledge of 14 CFR Parts 43 and 91 * Proven troubleshooter with the confidence to make independent airworthiness determinations * Articulate communicator who works well within a team setting * Familiar with Microsoft Office; eager to adopt Talon RMS or equivalent maintenance tracking platforms * Precise and thorough in documentation; holds high personal standards for accuracy and compliance * Independent, flexible, and steady under pressure in a dynamic flight training setting How to Apply At Rio Staffing, we specialize in connecting skilled professionals with well-run organizations and high-quality programs. We support you through every step of the process—from application and interview coordination to aligning opportunities with your experience, certifications, schedule preferences, and long-term career goals. Apply with us or reach out today at to find your perfect role.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on safety, quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Engineers is seeking a Managing Engineer with a focus on airfield and landside design and construction. This is a full-time position offering competitive compensation, great employee benefits and an outstanding work environment. Relocation assistance available for qualified candidates. Position Responsibilities You will provide team leadership for the design and construction of horizontal and vertical airfield projects in Southern California. You will lead project management efforts on large/complex engineering projects including budgets, resource alignment, client relations, quality, scheduling, and business development. Responsibilities include supervising engineers and designers, managing clients, engaging in industry events and conferences, administration of consultant/sub-consultant agreements, resolving critical issues/policy matters and delivering challenging projects for our clients. The Managing Engineer oversees and/or coordinates project staff assignments and workload to meet client deadlines. Opportunities exist to lead/support other projects in offices across the country. The Managing Engineer will utilize safe work practices in accordance with federal, state, local, and company standards and Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Skills/Education/Experience • 10 years required and 15 years preferred total of related experience with a preference for at least 5 years of experience working on large/regional airfield design/construction and knowledge of airfield and FAA regulations., • Thorough understanding of FAA procedures, policies and grant administration., • Bachelor’s Degree in Civil Engineering., • Professional Engineering (PE) License (California licensure preferred or able to get CA license within a year required)., • Existing relationships with large airport and aviation market clients a plus., • Private/consulting experience a plus., • Strong communications skills., • Skills to effectively lead and work in large and small multidisciplinary team environments. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionHadrian – Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! About the Workforce Development Team The Workforce Development team is dedicated to cultivating the next generation of manufacturing talent within a challenging, equitable, and meritocratic environment. Our goal is to accelerate the maturity and operational effectiveness of Hadrian's factories through targeted training programs. The team is responsible for developing and managing a comprehensive training system, driving software adoption, standardizing operational processes, and maintaining an integrated training and certification ecosystem. The Role As a Training Program Specialist, you will be the operational owner of training performance across a defined set of stations in our manufacturing environment. You will be responsible for translating new and updated processes into effective, on-the-job learning experiences that result in consistent execution and measurable technician proficiency. Your focus will be on velocity, quality, and team self-sufficiency. You will be the first to master new procedures, working closely with technicians and trainer cohorts to ensure flawless adoption of every process. You will monitor and act on training velocity (time to full crew readiness) and training quality (adherence to standards), closing gaps proactively. Your north star: Every station in your scope runs to standard, every shift, with a self-sufficient team. ***This is a full-time, hourly position and includes equity and comprehensive benefits. What You’ll Do * Lead all training activities for your assigned area, delivering on-the-job instruction and acting as the technical expert. * Work directly with technicians to understand process nuances, pain points, and improvement opportunities. * Master every process in your area and convert new methods into clear, teachable steps. * Train technicians and technician-trainers to ensure consistent, standard execution across all shifts. * Adapt coaching approaches to individual learning styles and support trainees through challenges. * Mentor technician-trainers to promote best practices in training delivery. * Own the full evaluation process, including quizzes, assessments, and progress reporting. * Create and refine evaluation criteria covering both hard and soft skills. * Partner with process designers to define tasks and decision points using structured “if/then” logic. * Maintain up-to-date, version-controlled training content that is always audit-ready. * Ensure returning technicians are aligned with the latest training standards. * Conduct and support training audits to ensure 100% procedural compliance. * Manage a blend of on-the-job and off-the-job training formats. * Collaborate with Learning System Engineers to develop and execute continuous improvement roadmaps. What We're Looking For * 1+ years of experience in a training, instructing, or teaching role with a focus on entry-level individual contributors * At least 2 years of experience working in a production / inspection environment * Proven ability to train people with experience ranging from entry level – mid level * Aptitude for rapid learning, reteaching, and influencing process adoption * Ability to independently recognize human patterns (both macro + micro) and provide actionable, objective, and mature recommendations to leadership What Will Set You Apart * Passionate about training, employee career development, and the Hadrian mission of reindustrializing the nation’s workforce * Training, instructing, or teaching experience in an operational environment * The ability to influence others without direct authority – you will not be a people manager, but your success is directly tied to influencing ability * High emotional IQ – able to self-improve after receiving feedback, provide guidance to trainers, and continuously learn and grow through the role Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR [here ](). Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions. You should be proficient in: • Leadership / People Management, • Labor Management Systems Knowledge, • Manufacturing Instruction (MI), • OSHA 10-Hour Certification (OSHA 10), • Coaching and Mentoring Experience, • Recruiting and Training Experience

Job Description Job Title: SolidWorks Drafter Company: Custom Control Sensors, LLC Location: Phoenix, AZ Employee Type: Full Time Non-Exempt Industry: Aerospace Manufacturing Education: High School or GED, plus 2 years of college or specialty design courses at a technical or trade school Experience: 5 years min. experience in Mechanical Component Drafting Company Overview Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS’ Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS’ Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our company’s success. Benefits: • Medical, • Dental, • Vision, • 401k with Match, • Employer funded Life Insurance, Short-term Disability, and Long-term Disability, • Paid Sick and Vacation Leave Under general supervision, the SolidWorks Drafter is responsible for producing detailed 2D and 3D technical drawings using SolidWorks software, in accordance with CCS’ Engineering Drawing Control procedures. Position also involves data entry and creating or editing Bill of Materials for new or existing products. Key Responsibilities: • Prepare 2D and 3D layouts, section, assembly, detail and source or specification control drawings based on CCS or Customer drawings, sketches, layouts or verbal instructions., • Must be familiar with ANSI 14.5M-“Dimensioning and Tolerancing”., • Edits, revises, and updates changes to existing drawings and Bill of Materials in support of production, sales and customers., • Keeps quality up to acceptable standards with little discrepant work., • Performs tasks equal to or exceeding established standards., • Accomplishes production quotas., • Follows instructions and procedures exactly., • Working consistently or working overtime to meet project deadlines, as required., • Conducts himself/herself in a business-like and civil manner., • Ability to react to changes productively and perform other essential tasks as assigned. Skills and Requirements: • Must qualify as a “U.S. Person” under 22 C.F.R. § 120.15 (ITAR). Verification required prior to employment., • Proficient knowledge in Solid Works or similar 3D design software, Microsoft Word, Excel and other Microsoft Office products as required., • Experience with Syteline or other ERP software systems for entering and maintaining product Bill of Material data is desirable., • Effective time management skills., • Attention to detail., • Continuous improvement focus., • Availability, flexibility, and maturity to represent the Company., • Manual dexterity to safely and proficiently operate company office equipment such as copiers, fax machines, calculators, and personal computers. Utilize word processing, spreadsheet, and presentation application skills., • Ability to sit for prolonged periods in front of a computer., • Ability to read, write, and follow written and verbal instructions in English., • Ability to work well with only a modest amount of repeated instructions., • Be team oriented and possess flexibility and adaptability. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity/Affirmative Action employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. NO RECRUITMENT/STAFFING AGENCIES

Job DescriptionSalary: The Weitz Company is hiring aProject Engineer to join our Southwest Business Unit out of Phoenix, AZ! The Project Engineer is responsible for several functions throughout the duration of the assigned project including planning, buyout, management, and closeout. This role will assist the project team to monitor project status and identify issues that may impact the project schedule and/or budget. If you are looking for an opportunity to join a general construction company who is focused on employee growth and development, this could be a great fit for you! An ideal candidate for this position must be willing to travel once the assigned project is complete, based on the needs of the company. The Weitz Company has been Building a Better Way since 1855. We are a full-service construction company, general contractor, design-builder, and construction manager with office locations throughout the United States. We believe our employees to be our most valuable asset, and we are committed to growing a diverse and inclusive culture that inspires, motivates, and continuously improves. What Youll Do: • Organize, review, update, maintain, and post construction documents/drawings, • Collaborate with project team to complete requests for information (RFI), • Review submittals and other project documents for accuracy against plans and specifications, • Assist in preparing inspections, compliance audits, and the non-conformance log, • Monitor material and equipment delivery status, • Maintain and distribute accurate project logs, • Understand scope of work to be included in subcontracts and/or purchase order agreements, • Track subcontractor requests for change; solicit pricing and draft change orders within delegated authority, • Understand and assist with project schedule management, • Obtain closeout information, gather punch list items, prepare as-built drawings, and assist with warranty process, • Travel and/or relocate to specified work assignments based on the needs of the company What Were Looking For: • Experience:, • 2+ Years construction project management experience preferred, • Industry related degree required, • Previous construction internship or experience in project engineering role is highly preferred, • Aviation construction is preferred, • Skills:, • High level of initiative and problem-solving skills, • Excellent verbal and written communication, • Detail-oriented and highly organized, • Flexibility to balance competing needs, • Ability to build positive relationships across the organization, • Technology:, • Proficient in basic computer software including Microsoft Word, PowerPoint, Excel, and Outlook, • Ability to learn specific job-related software upon hire What We Offer: • Competitive Pay, • Rewarding Bonus Program, • Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings, • Employer-Paid Short- and Long-Term Disability Programs, • Employer-Paid Life Insurance, • Generous Paid Time Off Provisions, • 401K Retirement Savings Plan with Company Match, • Tuition Reimbursement, • Fully Paid Parental Leave, • Voluntary Products Including: Critical Illness Insurance and Accident Insurance, • Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-basedsubsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce.We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicantswill receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicablestate and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable.Click hereto review our Privacy Notice. #LI-MN1

Job Description NOW HIRING! Karber Corporation (K CORP) is a full-service mechanical and plumbing contractor serving a wide range of industries, including data centers, healthcare, manufacturing, education, aviation, commercial offices, and hospitality. We believe talent comes from all walks of life—and that ambition and hard work are the only prerequisites to success. Whether your goal is to become a master tradesperson or the president of the company, there are no limits to what you can achieve at K CORP. We are seeking a dynamic and experienced Service Plumbing Field Supervisor to lead our Plumbing service operations in the Phoenix, Arizona region. This is a high-impact leadership role responsible for overseeing daily operations, driving financial performance, developing team members, and aligning service delivery with our strategic goals. The ideal candidate is a proactive leader with a passion for operational excellence, team development, and customer satisfaction. WHAT WE OFFER: · Competitive salary · Comprehensive benefits including Medical, Dental, Vision, Life & AD&D, and Disability · 401(k) retirement savings with Employer Match Contribution · Employee Discount Program(s) · Employee Assistance Program (EAP) · Paid Time Off · Paid Holidays · A collaborative work environment · Opportunities for career growth in a rapidly expanding company OUR CORE VALUES: · We do what’s right: Being ethical and transparent every step of the way. · We show up: Fully for our customers, our business, and each other, every single time. · We take pride: In bringing buildings to life. · We own our actions: And deliver on our promises. · We stay true: Embracing relentless growth and fostering unstoppable collaboration. · We have fun: While being awesome. ESSENTIAL DUTIES: • Supervise, train, and support plumbing service technicians, • Assist dispatch in scheduling service calls efficiently, • Review Job Work Orders, Invoices, and Projects for accuracy, • Ensure all work complies with local, state, and federal regulations, • Maintain high levels of customer satisfaction through quality service and communication, • Monitor inventory, tools, and equipment, • Manage escalated customer issues and resolve conflicts, • Collaborate with sales and installation teams to ensure seamless operations, • Track KPIs and prepare performance reports, • Diagnoses plumbing issues through observation, testing and setup., • Performs disassembly and reassembly of large or small commercial equipment to perform trouble shooting., • Performs planned maintenance and inspections as indicated in the service agreement., • Handles the following plumbing repairs: stoppages/cabling, pumping and backflow testing/repair/replacement, fixture install/replacement and general troubleshooting or repair, domestic water/sewer or storm water leak/repair, fixture rough in, pump replacement/repair, leak locating/line tracing, hydro jetting and camera., • Responsible for water heater maintenance/troubleshooting/replacement and boiler maintenance, boiler pumps and circulating, boiler controller, troubleshooting and system installation., • Completes service contracts, quoted projects and demand service calls as directed., • Develops long-term relationships with customers and explains work performed to the customer's satisfaction., • Communicates and documents project status to all project stakeholders., • Serves as a lead and front-line resource to service technicians through technical support., • Coordinates the work of subcontractors, and trains and provides guidance to technicians., • Coordinates multi-tech jobs, and accomplishes multiple tasks on multiple projects with minimal impact, if any, between projects., • Reviews job contract specifications and assists with installation plan., • Coordinates work so it aligns with the project and start-up schedule., • Safely drives a motor vehicle and trailer, follows requirements of company vehicle driving policy and adheres to all company safety requirements., • Completes documentation of invoicing data based on hours worked and materials/equipment used to complete the service., • Attract, onboard, and nurture talent to support team growth and succession planning., • Deliver continuous coaching and feedback to elevate team performance and leadership capabilities., • Cultivate cross-location collaboration to share best practices and leverage collective expertise., • Maintain transparent and proactive communication with the director of service., • Ensure major decisions align with company values and goals and are communicated effectively. Requirements: • 10+ years of commercial experience as a Service Plumbing Technician., • Holds a valid Arizona Plumbing License., • Performs as self-managed individual., • Professional demeanor, solid interpersonal skills with good written and oral communication capability., • Demonstrates strong business ethics at all times., • Proficient in-service management software and Microsoft Office, • Ability to work in a fast-paced environment and manage multiple priorities, • EPA Universal Certification preferred, • Strong understanding of plumbing codes, safety regulations, and best practices, • Experience with budgeting, cost control, and resource planning, • Ability to mentor and develop technicians at all skill levels, • Strong problem-solving skills and attention to detail, • Customer-first mindset with a commitment to service excellence, • Ability to analyze performance metrics and implement improvements, • Experience in the plumbing trade industry., • Experience with commercial boiler applications, • Familiarity with the Service Titan or equivalent (EOS) software ., • Proficiency with service management or ERP systems., • Ability to work independently and as a team member., • Professional demeanor and solid interpersonal skills., • Strong business ethics., • Excellent organizational and time management skills., • Positive, personable, and detail oriented., • Effective communication across multiple platforms and levels. Additional Skills: · Proficient in Microsoft Excel, Word, Teams, Bluebeam, and Outlook. · Strong multitasking abilities. · Excellent verbal and written communication skills. · Proficient in data entry. WHY COME TO WORK AT KARBER CORPORATION? If you are passionately committed to building strong teams while maintaining the highest standards, K CORP offers an enthusiastic and supportive environment where leaders can thrive, make impactful contributions, and shape the future of our business. Join us to advance your leadership career in a company that values trust, accountability, and operational excellence. We eagerly invite you to apply and become a part of our K CORP dynamic team! Benefits: • 401(k), • 401(k) matching, • Company truck, • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Fuel card, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Retirement plan, • Vision insurance

Job Description Cirrus Aircraft’s Mission is to deliver an aviation experience that is the pinnacle of innovation, quality, and safety to our customers. Cirrus Aircraft is the recognized global leader in personal aviation and the maker of the best-selling SR Series piston aircraft and the Vision Jet™, the world’s first single engine Personal Jet and recipient of the 2017 Robert J. Collier Trophy. Founded in 1984, the company has redefined performance, comfort and safety in aviation with innovations like the Cirrus Airframe Parachute System® (CAPS®) – the first FAA-certified whole-airframe parachute safety system included as standard equipment on an aircraft. To date, worldwide flight time on Cirrus aircraft has passed 16 million hours and over 250 people have returned home safely to their families as a result of the inclusion of CAPS® as a standard feature on all Cirrus aircraft. Find out more at cirrusaircraft.com. Job Summary The Fleet Manager/Maintenance Controller is responsible for promoting flight safety and delivering exceptional customer service to both internal and external stakeholders. This role provides continuous oversight of the real-time location and status of the Cirrus Managed Aircraft fleet (SR2X and SF50) while developing and executing proactive maintenance strategies to maximize aircraft availability and minimize downtime. The Fleet Manager works closely with Maintenance and Operations teams to ensure compliance with FAA regulations and company policies. Responsibilities include coordinating with service centers and vendors to schedule routine and unscheduled maintenance, managing AOG events, maintaining complete and compliant maintenance records, and partnering with Schedulers and Dispatchers to facilitate the movement of Cirrus-owned, leaseback, and customer aircraft. The position requires availability during normal business hours and on-call responsiveness after hours. Duties and Responsibilities/Essential Functions • Ensure all aircraft are maintained and in airworthiness compliance in accordance with applicable FARs and Cirrus policies., • Provide world-class customer service to internal and external customers by embodying the Cirrus Service Essentials and abiding by the Guiding Principles., • Continuously manage the real-time aircraft location and airworthiness status of fleet., • Develop and implement a proactive maintenance plan by forecasting anticipated future utilization to minimize downtime and ensure maximum asset utilization, making financial decisions about maintenance timing and negotiating with outside service centers to achieve best result for the company., • As an expert in aircraft maintenance programs and airworthiness procedures, determine when and where to complete aircraft service, using tools such as MEL’s to defer maintenance when appropriate., • Coordinate with service centers to schedule and complete routine maintenance or repairs, ensuring that all work is completed on time, within budget, and prioritized according to company needs., • Make financial decisions to address any unforeseen maintenance items that arise from non-routine maintenance events, ensuring that all necessary repairs are completed as quickly and efficiently as possible., • Develop and maintain relationships with aircraft service centers and vendors to ensure that we have access to the best possible maintenance and repair services at competitive prices., • Maintain accurate records of all maintenance and repair activities and provide regular reports to management and the FAA on the status and utilization of our fleet., • Audit aircraft maintenance endorsements logbooks, MELs, FAA-required documents, and supporting documents to ensure that all records are in compliance with FARs and Cirrus requirements., • Partner with the Schedulers and Dispatchers to facilitate and schedule movement of Cirrus-owned aircraft, leaseback aircraft, and customer aircraft by coordinating between Flight Operations, Regional Sales Directors, service centers, and the Duluth production facility., • Monitor and audit aircraft Total and Flight times to ensure accuracy of flight logs and provide regular reporting to the delivery advisory team and the accounting department., • Coordinate with the Delivery Experience team and tax advisors to create leaseback reports to ensure aircraft usage and applicable documentation meets Cirrus’ policy and customers' tax requirements., • Receive, audit, process, and record invoices that provide budget and business analytics., • Coordinate and manage AOG (Aircraft on Ground) maintenance events for our aircraft fleet, including scheduling, logistics, acquisition of parts, and resource allocation., • Liaise with internal and external stakeholders, including maintenance personnel, operators, suppliers, and regulatory bodies, to ensure effective communication and collaboration throughout the maintenance event., • Determine the applicability of all Service Bulletins and Airworthiness Directives that are issued for the fleet and coordinate compliance of each issuance., • Monitor and report on maintenance event progress, providing regular updates to relevant stakeholders and escalating issues or concerns as necessary. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. • Bachelor’s degree in Aviation Management, Aerospace Engineering, Business Management, or related field (required)., • 2-4 years of experience in fleet management, aircraft maintenance control, dispatching, or technical operations (preferred; 0–1 years acceptable with strong internship/co-op experience)., • FAA Airframe & Powerplant (A&P) Certificate and/or Private Pilot Certificate (preferred)., • Strong knowledge of FAA regulations including Parts 43, 91, and 145, with familiarity in interpreting MELs, Service Bulletins, and Airworthiness Directives. To perform the job successfully, an individual should demonstrate the following competencies: • Manages Complexity: Makes sense of complex, high quantity, and sometimes, contradictory information to effectively solve problems., • Optimizes Work Processes: Knows the most effective and efficient processes to get things done, with a focus on continuous improvement., • Organizational Savvy: Maneuvers comfortably through complex policy, process, and people-related organizational dynamics., • Situational Adaptability: Adapts approach and demeanor in real time to match shifting demands of different situations., • 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting., • Employer-Paid Coverages: Group term life, short- and long-term disability insurance., • Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options., • Free Health Tracking: With rewards for meeting health goals., • Generous PTO: 120 hours accrued within the first year., • Employee Referral Bonus: For referring talented candidates., • Career Development: Tuition reimbursement and professional growth opportunities., • Exclusive Discounts: Access to partner and marketplace discounts. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Division: Critical Facilities-Data Centers Project Location(s): Columbus, OH 43085 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt * This position is for a full time traveling assignment supporting an Advanced Technology project, which includes our Data Center, Pharmaceutical, Industrial/Manufacturing, and EV/Battery/Renewables market segment groups (MSG). * Position Description: Oversee and direct preconstruction, engineering, and installation of Special Systems including Division 27 Telecommunication and 28 Electrical Safety, and security specifications for data centers for project types such as sports venues, aviation, federal, healthcare, and detention. Essential Duties & Key Responsibilities: • Manage Special Systems procurement, project budgets, quality, safety, engineering, coordination, scheduling, installation, commissioning, and close-out processes., • Special Systems include Division 27 Telecommunication and 28 Electrical Safety., • Project types include, but are not limited to, security specifications for data centers, sports venues, aviation, federal, healthcare, and detention., • Prepare scope of work documents with a division of responsibility for trades and specific scopes of work for special systems., • Participate in Guaranteed Maximum Price (GMP) development, identify design features that command cost premiums and recommend alternatives that deliver comparable or improved functions, and ensure alignment with scope., • Interpret and review Special Systems contract documents to mitigate and manage project risk including but not limited to schematic design (SD-30% documents), design development documents (DD-60% documents), construction documents (CD-100% documents), bid and award, conformed documents, requests for information (RFI), change orders, submittals, bulletins, as-built drawings, and closeout documentation., • Leverage contract document knowledge to negotiate construction change requests., • Execute integration and successful delivery of Special Systems compliance, construction delivery support, construction coordination, construction quality control, and field engineering from inception through closeout of project., • Develop and maintain relationships with Engineers, Design Consultants, Subcontractors, Suppliers, Inspectors, and Owner's Representatives to ensure alignment with client goals and expectations from initiation to completion of project., • Lead, supervise, and develop Turner Special Systems employees, provide coaching and expert guidance on processes and implementation., • Collaborate with Business Development team and potential clients, contribute to proposal process and presentations., • Foster environment with Special Systems team to provide coaching and expert guidance on processes and implementation and be open to team contributions for continuous improvement., • Participate in hiring process, onboard and deliver timely performance feedback for direct reports, execute/contribute to performance appraisals during annual performance cycle, utilize talent management systems, and identify appropriate training to help with development needs., • Other activities, duties, and responsibilities as assigned. #LI-PB1 Qualifications: • Minimum of 10 years of experience with progressive responsibility and exposure to construction design, cost, sequence, logistics and field installations of substantial Low Voltage systems and IT Infrastructure components or equivalent combination of education, training, and experience, • Experience with installation of one or more major Special Systems and IT Infrastructure components, required, • Working knowledge of Telecommunications Industry Association/Electronic Industries Alliance (TIA/EIA) and Building Industry Consulting Services International (BICSI), • Familiar with range of project delivery methods (e.g., design-bid-build, design-build, and construction manager at risk), • Extensive system integration experience, • Supervisory experience, ability to motivate, coach, and develop high performance teams, • Excellent interpersonal skills, able to lead, negotiate, influence, and engage stakeholders, teams, and others, • Professional and effective written and verbal communications skills with ability to present to technical and non-technical audiences, and tailor communications appropriately, • Advanced project management skills and ability to manage high volume of work for self and team in deadline driven work environment Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee regularly travels both short and long distances via a variety of conveyances. The employee regularly performs work on-site at construction work sites, office locations, and/or off-site venues. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office or remote setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Division: San Diego Project Location(s): San Diego, CA 92101 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt * This position is for a full-time traveling assignment supporting projects across the United States. We are looking for project experience within Aviation, Data Center, Pharmaceutical, Healthcare, Industrial/Manufacturing, and EV/Battery/Renewables market segments. * Position Description: Oversee and direct preconstruction, engineering and field installation of all Mechanical, Electrical, Plumbing (MEP) systems. Reports to: Project Manager, Project Executive, Construction Executive Essential Duties & Responsibilities: Specifically relating to the mechanical and electrical systems (e.g. HVAC, Plumbing, Electrical, LowVoltage, Fire Sprinkler) • Develop and maintain relationships with engineers, design consultants, subcontractors, suppliers, inspectors, and owner's representatives to ensure alignment with client goals and expectations from initiation to completion of the project., • Comprehensive knowledge and understanding of the contract documents (including Turner's contract, plans, specifications and applicable codes)., • Lead, supervise and develop Turner MEP staff, including providing input on or completing performance appraisals., • Oversee daily activities of Engineer-MEP, Superintendent-MEP, and subordinates., • Manage MEP procurement, project budgets, quality, safety, engineering, coordination, scheduling, installation, commissioning, and close-out processes., • Other duties, actions, and responsibilities as assigned. The salary range for this position is estimated to be 130,000.00 - 190,000.00 USD annualized. Qualifications: • Bachelor's degree and minimum ten (10) years' experience with progressively more responsible exposure to design, cost, sequence, logistics and field installations of Mechanical and Electrical systems or equivalent combination of training and experience., • Able to identify design features that command cost premiums and recommend alternatives that deliver comparable or improved function., • Demonstrated ability to present technical material., • LEED accreditation preferred., • Very strong oral and written communication skills required., • Strong computer skills and a familiarity with Microsoft Office Suite of programs., • Knowledge of project management and scheduling software desirable., • Ability to implement leading edge technologies to benefit the project., • Demonstrated leadership and interpersonal skills. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the duties will occasionally require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear (bells, whistles, etc.), stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 50 lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is sometimes exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles or caustic chemicals. The noise level in the work environment is usually moderate. #LI-SC1 Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Division: San Diego Project Location(s): San Diego, CA 92101 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Environmental Health and Safety Compensation:Salaried Exempt * This position is for a full-time traveling assignment supporting projects across the United States. We are looking for project experience within Aviation, Data Center, Pharmaceutical, Healthcare, Industrial/Manufacturing, and EV/Battery/Renewables market segments. * Position Description: Partner with Environmental Health & Safety (EH&S) and project teams to enforce site compliance with company, EH&S programs, policies, procedures, and regulatory requirements on a single construction project within business unit's geographic area. Lead training of safe work practices to educate and inform and guide project teams on management of environmental and hazardous materials reports and conditions. Essential Duties & Key Responsibilities: • Lead, direct, and enforce Environmental Health & Safety (EH&S) on single construction project, based on safety staffing requirements as defined by Headquarters (HQ) EH&S policy., • Manage time and resource allocation and provide safety leadership to assigned project., • Assess project Safety practices and known and potential safety related exposures, develop and implement action plans to mitigate risks, and drive changes to improve project team safety awareness and activities., • Communicate requirements for improving performance to project leadership and team for adoption and adherence to changes, using project specific-safety standards, best management practices, and EH&S policies and procedures., • Understand site safety trends and participate in reducing Project Incident Rates by meeting or exceeding established Business Unit (BU) goals and manage regulatory exposures to zero citations., • Develop training for project site-specific needs to educate project management, employees, subcontractors, and Turner Trade employees on Environmental Health & Safety (EH&S) programs, policies, and procedures and provide training on safe work practices to encourage and enforce adoption and adherence., • Promote safe work practices and safe working conditions in accordance with company and Environmental Health & Safety (EH&S) policies, Federal, State, and Local regulations, and owner contractual requirements., • Maintain and enhance working relationships with project staff and subcontractor Safety Representatives., • Develop and enforce project Safety Program and related policies and procedures., • Identify unsafe actions and conditions and engage with project team to implement immediate corrective actions in accordance with Turner, Federal, State and Local regulations and owner requirements., • Develop accountability model for project team to ensure pre-planning for activities and tasks for subcontractors and trades., • Review subcontractor safety programs for completeness and compliance with company and EH&S policies, Federal, State, and Local regulations, and owner contractual requirements., • Review quality of Pre-Task Plans (PTPs) for project subcontractors and Trades based on contractual requirements., • Hold Preconstruction planning meetings with subcontractors to review site safety program and job hazard analysis for their scope of work and to establish and review risk mitigation plans., • Develop safety action items for Preconstruction meetings and verify subcontractors conduct training as per OSHA standards., • Conduct effective worker orientation program for new employees; administer and record participation., • Collaborate with project leadership to create project specific safety reports, assess metrics, and make recommendations for improvement over baseline., • Ensure timely log of subcontractors' toolbox safety meetings., • Conduct and review project team's safety audits, assess recommended corrective actions, and issue reports of violations and/or unsafe practices for immediate resolution., • Other activities, duties, and responsibilities as assigned. The salary range for this position is estimated to be 130,000.00 - 190,000.00 USD annualized. Qualifications: • Bachelor's Degree from accredited degree program in Occupational Safety & Health, Engineering, or related field of study, and minimum of eight (8) years of related construction safety experience, or equivalent combination of education, training, and experience, • Construction Health Safety Technician (CHST) certification required or within 2 years of appointment, • Completed OSHA 30-hour training and maintain current First Aid/CPR/BBP and AED certifications, • Knowledgeable of Federal, State, and local Environmental Health & Safety regulations, • Working knowledge and consistent application of safety and environmental principles and techniques, • Ability to identify known and potential safety related exposures and lead implementation of corrective actions, • Familiar with general construction operations, • Demonstrate elements of leadership from within, teamwork, and interpersonal skills to build teams and professional relationships, • Professional verbal and written communication skills and effective presentation delivery skills, • Exceptional organizational skills with high attention to detail, • Analytical thinking, good judgment, and complex problem-solving skills. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee must regularly lift and/or move up to 15 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. #LI-SC1 Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do In Viasat Access Edge Devices team, we are looking for members of a software architecture team that can design, write, and deliver software services for our edge devices targeted for aviation, maritime and other markets. Our software teams improve the availability, scalability, and operational efficiency of the services by building automation to prevent the recurrence of field issues. As a Software Architect, you will be directly involved in the creation of new designs, architectures, and methods for large-scale distributed systems. You will work closely with product managers, product owners, senior engineers, and team leads to ensure that design roadmaps are aligned with long-term strategic vision and immediate term business priorities. As part of our DevOps model, you will develop the service end to end including conducting periodic on-call duties using a follow-the-sun model. As a Software Architect, you will also be responsible for evolving the software practices in use by the development teams to drive improvements to quality, agility. The day-to-day Your team is engaged in an exciting integration of multiple global satellite networks. Our venues meet the market needs of multiple businesses including maritime, business aviation, and commercial aviation. As some of our markets have very high standards and are regulated, our architecture must be flexible enough to meet the needs of new and emerging markets while satisfying our mature process and procedure-forward customers. You will take inputs from customers, product owners, regulatory restrictions, and combine them with your technical expertise to help design a new generation of software architecture that scales across all markets. The ability to express these architectures as roadmaps with iterations on the way to longer-term end goals is essential. Your designs should be easily expressed in requirements that DevOps teams can execute with minimal direction. You will also be responsible to enabling software practices that aid with improving our development agility, scalability, reliability and quality. As a Hybrid position, this role provides the advantage of collaborating in-person at one of our global offices for three or more days each week, while also allowing the flexibility to work remotely two days a week. What you'll need • Typically requires 8+ years of related experience with commercial software development in building embedded systems software and with a Master's degree in Computer Science or Computer Engineering; or 10+ years related experience with a Bachelor's degree in Computer Science or Computer Engineering; or 12+ years related experience without relevant degree, • Hands-On experience with constructs of Domain Modeling, Distributed Systems, API Management, Micro-services Architecture (One or more), • Experience working with edge devices that have real-time considerations, device drivers to interface with peripherals, power efficiency, hardware accelerators (FPGA, ASIC, GPUs), Intermittent connectivity, require remote management and operations, • Ability to develop and deliver software using CI / CD and DevOps practices, • Hands-On experience with Object Oriented Programming Languages such as C / C++ / Python / Java / GoLang, • Modern methodologies for independently configuring, testing, and deploying microservices, • Experience with virtualization technologies such as Kubernetes, docker compose, • Strong background in networking, • Strong background in security, • Learning Agility, • Experience with application of AI tooling to aid the development life cycle $161,000.00 - $255,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $200,500.00- $300,500.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do The Senior Configuration Data Management (CDM) Manager is a strategic leader responsible for establishing, governing, and evolving configuration management practices across commercial aviation and space programs. This role sets expectations for data integrity, traceability, and change control across the product lifecycle and ensures alignment with company, contractual, and regulatory requirements, even when standard Configuration Management practices are not explicitly defined or broadly adopted. The Senior CDM Manager provides cross-functional leadership, drives enterprise-level process improvement, and actively influences program and functional leadership to mature configuration management capability, governance, and culture across the commercial business areas. This role represents CDM function to senior leadership, customers and external partners, and reports directly to the Director of Configuration Data Management. The day-to-day • Provides strategic leadership and direction for hardware and software configuration management, including lifecycle control, change governance, and cross-discipline integration across programs and functional organizations., • Leads and oversees configuration management support for proposals and program planning activities, including review of Requests for Proposals (RFPs) and Statement of Work (SOW) to define configuration management scope and work content, establish defensible Basis of Estimates (BOEs), and ensure CM activities across hardware and software are appropriately planned, resourced, and aligned with enterprise standards., • Accountable for establishing and maturing organizational configuration management capability across programs and business areas by setting expectations and influencing consistent application of CM principles; including assessing prime and subcontract contractual, technical, and program documentation to identify CM responsibilities, risks, and dependencies (configuration identification, traceability, data management, change control, and life-cycle governance) and ensuring appropriate CM work requirement flow-down, mitigation, staffing, and governance are established - even when CM is not explicitly stated., • Lead and govern CDM practices across multiple programs/product lines, ensuring consistency, compliance, and alignment with organizational and contractual requirements., • Provide leadership and direction to the CDM team, ensuring clear priorities, performance management, and development of talent., • Provide cross-functional leadership and build partnerships with engineering, operations, quality, supply chain, and program management to strengthen configuration control and traceability., • Translate organizational objectives into actionable strategies, influencing prioritization, priorities, and execution across programs., • Represent the CDM function with authority and credibility to senior leadership, customers, auditors, and regulatory authorities., • Serve as subject matter expert in configuration identification, change management, data management, configuration status accounting, and audit readiness., • Oversee and optimize PLM systems and data governance protocols, driving adoption of innovative tools and technologies to enhance efficiency and digital thread continuity., • Anticipate risks and lead resolution of blocking issues that span multiple programs, ensuring business area continuity and customer happiness., • Ensure compliance with applicable standards and regulations including AS9100, EIA-649, ECSS, ISO-9001, ITAR/EAR, and FAA requirements., • Demonstrated ability to lead cross-functional initiatives, manage competing priorities, and influence senior leaders, customers, auditors, and regulatory authorities., • Evaluate CDM process efficiency and lead continuous improvement initiatives to improve efficiency, scalability, and compliance., • Bachelor's degree in engineering, business, or a related field required or equivalent experience in Configuration Data Management., • 8+ years of progressive managerial experience leading professional staff., • Deep knowledge of configuration management standards (e.g., AS9100, EIA-649, ECSS-M-ST-40) and lifecycle practices across hardware, software, and systems domains., • Demonstrated ability to lead cross-functional initiatives, manage competing priorities, and influence senior leaders, customers, auditors, and regulatory authorities., • Advanced expertise in industry standard PLM systems, data governance, and strategies., • Strong analytical mindset with proven ability to anticipate, identify, and mitigate configuration and program risks to ensure compliance with product and contractual requirements., • Excellent leadership, communication, and stakeholder management skills., • CM 2 or CMPIC certification preferred. $134,500.00 - $212,500.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $160,000.00- $240,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

Teaching Professor (all ranks) in Aviation Programs (Professional Flight) Arizona State University Ira A. Fulton Schools of Engineering The Polytechnic School Location: Polytechnic Campus The Ira A. Fulton Schools of Engineering at Arizona State University (ASU) and The Polytechnic School (TPS) seek applicants for two teaching professor (all ranks) positions in professional flight in our Aviation program. Appointments may be at Assistant Teaching Professor, Associate Teaching Professor, or (Full) Teaching Professor rank, commensurate with the candidate?s experience and accomplishments, beginning August 2026. These positions are career track appointments with a fixed-term academic year contract. It is anticipated that the contract will be renewed annually subject to satisfactory performance and the needs of the university. The Professional Flight in Aviation program is one of the outstanding programs on the ASU Polytechnic campus, attracting students from across the nation and world. The Professional Flight in Aviation program curriculum is unique, using a professional practice model with integrated, active learning strategies and incorporating high-technology simulators. The program graduates earn a Bachelor of Science degree in Aeronautical Management Technology, with a concentration in Professional Flight. More information about the program can be found at . The successful candidate is expected to teach undergraduate and graduate courses as assigned, such as: Private, instrument, commercial, and/or instructor pilot ground schools; Aviation weather/meteorology; Aviation safety; Aviation security; General aviation operations and management; Airport management/planning; Air transportation; Air traffic control; and Unmanned aerial systems. Also, all faculty should be able to assume the FAA Chief Ground Instructor role for Part 141 ground courses; serve on program, school, and university committees as assigned; and serve as faculty advisor for selected student clubs. The Polytechnic School seeks candidates who have a demonstrated record of excellence in teaching that incorporates experiential learning, contributes to our academic programs, promotes transdisciplinary teaching, and helps the university to achieve its aspirations, including enabling student success, transforming society, and valuing entrepreneurship. Faculty members in the Fulton Schools of Engineering are expected to adopt effective pedagogical practices in the development and delivery of courses. Essential Functions · Deliver in-class and online instruction at the undergraduate and graduate level; hold office hours · Conduct laboratory sessions in coordination with lecture content, including instruction using flight simulation technologies · Engage undergraduate and graduate students in a project-based educational setting involving theses, applied and/or course projects · Support and maintain program compliance with FAA Part 141 standards · Participate in educational program design, delivery, and assessment of learning, and develop curriculum · Advise and mentor students · Serve on program and unit committees and participate in college, university and professional service activities · Serve as faculty advisor for selected student clubs QUALIFICATIONS Required Qualifications · Earned Master?s or Ph.D. degree in engineering, aviation, or a closely related field by the time of appointment · Earned FAA Advanced Ground Instructor (or Certified Flight Instructor) and Instrument Ground Instructor (or Certified Flight Instructor Instrument) certificates by the time of appointment · Demonstrated experience in a field applicable to aviation · Commitment to teaching excellence as appropriate to the candidate?s rank Desired Qualifications · Current pilot qualifications · Extensive aviation experience · Evidence of excellence in university teaching · Demonstrated commitment to a collaborative, transdisciplinary approach to teaching Application Instructions The application deadline is March 26, 2026. Applications will continue to be accepted on a rolling basis for a reserve pool. Applications in the reserve pool may then be reviewed in the order in which they were received until the position is filled. To apply, visit and select ?apply now? next to the corresponding position. Candidates will be asked to create or use an existing Interfolio Dossier to submit the following: · Cover Letter · Curriculum Vitae · Statement Describing Teaching Interests and Philosophy (four pages maximum) · Contact Information for Three (3) References ? Name, Position, Affiliation, Email, and Phone The ASU Charter states, ?ASU is a comprehensive public research university, measured not by whom it excludes, but by whom it includes and how they succeed; advancing research and discovery of public value; and assuming fundamental responsibility for the economic, social, cultural and overall health of the communities it serves.? The Fulton Schools of Engineering are dedicated to cultivating excellence, delivering innovation that matters, encouraging bold thinking, fostering a community of learning and collaboration, and building a foundation for all to be successful. Applicants are encouraged to address how their past, current, and future activities align with the ASU Charter and Fulton Schools of Engineering values in their application materials. For additional information regarding position specifics, please contact the search committee chair, Prof. Greg Files at Equal Employment Opportunity Statement A background check is required for employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other basis protected by law. See and . In compliance with federal law, ASU prepares an annual report on campus security and fire safety programs and resources. ASU?s Annual Security and Fire Safety Report is available online at . You may request a hard copy of the report by contacting the ASU Police Department at 480-965-3456.

Job Description KP Aviation, an international supplier and procurer of aftermarket aviation components and assets, is searching for the next key member of our team! The Warehouse Associate - 1st Shift (6AM - 3PM) is not your typical warehouse position. The role is vital to the operations of our company by participating in the core functions of our business. This position is actively involved in the detailed processing of aviation parts and materials in accordance with outlined procedures. Responsibilities include inventory inspection, data entry, receiving and shipping, and material processing. Your role will take you to new heights, as you’ll be tasked with these essential job responsibilities: • Perform inspection of incoming (received) material and ensure proper documentation, • Enter and receive part data into inventory database, • Ensure information entered into inventory database is detailed and accurate, • Record and file trace documents in appropriate locations (electronically and hard copy records), • Locate and pull material for inspection and/or shipment, • Prepare and package material for storage and/or shipment, • Clean and prepare parts as instructed, • Perform physical inventory count as directed, • Relocate material from one location to another to consolidate and manage storage, • Assist others in maintaining an organized and clean warehouse and workstations, • Participate in audits, inspections and quality assessments as directed, • Minimum of 2-3 years of experience in a stockroom/warehouse environment., • Knowledge of computer programs including Microsoft Office applications and databases., • Knowledge of basic warehouse and inventory processes., • Skill in typing and general computer literacy., • Skill in oral and written communication., • Ability to lift at least 50 lbs., • Ability to be flexible, self-directed, and motivated., • Ability to be highly organized and detail-oriented., • Ability to maintain records, review documents for accuracy, organize documents., • Ability to communicate effectively with coworkers, management, and others., • Experience with inventory management a plus., • Experience forklift operation a plus., • Experience with dangerous goods and international shipping a plus., • Starting wage based on experience and qualifications., • Generous Medical, Dental, Vision, Life and Short-Term Disability coverage (Employer pays 100% of employee premiums), • 401(k) Plan with Employer Contribution, • Profit Sharing and Bonus opportunities, • Voluntary ancillary plans including Life Insurance, Accident and Hospital coverage

Job Description KP Aviation, an international supplier and procurer of aftermarket aviation components and assets, is searching for the next key member of our team! The Warehouse Associate - 2nd Shift (3pm to 1:30am) Monday through Thursday 4/10s is not your typical warehouse position. The role is vital to the operations of our company by participating in the core functions of our business. This position is actively involved in the detailed processing of aviation parts and materials in accordance with outlined procedures. Responsibilities include inventory inspection, data entry, receiving and shipping, and material processing. Your role will take you to new heights, as you’ll be tasked with these essential job responsibilities: • Perform inspection of incoming (received) material and ensure proper documentation, • Enter and receive part data into inventory database, • Ensure information entered into inventory database is detailed and accurate, • Record and file trace documents in appropriate locations (electronically and hard copy records), • Locate and pull material for inspection and/or shipment, • Prepare and package material for storage and/or shipment, • Clean and prepare parts as instructed, • Perform physical inventory count as directed, • Relocate material from one location to another to consolidate and manage storage, • Assist others in maintaining an organized and clean warehouse and workstations, • Participate in audits, inspections and quality assessments as directed, • Knowledge of computer programs including Microsoft Office applications and databases, • Knowledge of basic warehouse and inventory processes, • Skill in typing and general computer literacy, • Skill in oral and written communication, • Ability to lift at least 50 lbs., • Ability to be flexible, self-directed, and motivated, • Ability to be highly organized and detail-oriented, • Ability to maintain records, review documents for accuracy, organize documents,, • Ability to communicate effectively with coworkers, management, and others, • Minimum of 1-2 years of experience in a stockroom/warehouse environment, • Experience with inventory management a plus, • Experience forklift operation a plus, • Experience with dangerous goods and international shipping a plus, • Starting wage based on experience and qualifications., • Generous Medical, Dental, Vision, Life and Short-Term Disability coverage (Employer pays 100% of employee premiums), • 401(k) Plan with Employer Contribution, • Profit Sharing and Bonus opportunities, • Voluntary ancillary plans including Life Insurance, Accident and Hospital coverage

Division: Aviation Project Location(s): Dallas, TX 75201 USA Minimum Years Experience: 10+ Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt * This position is for a fulltime traveling assignment. Locations are across the United States supporting our Aviation projects and will report to our Aviation Market Segment Group. Prior aviation or other airport related project experience is strongly preferred.* Position Description: Support the Superintendents and Foremen on the various projects; oversee all trade labor hire, transfer and layoff. Reports to: Deputy Operations Manager, Operations Manager Essential Duties & Responsibilities*: • Coordinate with the Operations Manager for all assignment of Superintendent and Foreman positions., • Assign and coordinate all trade field assignments with the needs of various projects., • Support Superintendent throughout the duration of the job., • Review project schedules with Superintendents/Foreman. Ensure that critical activities and decisions remain on task and that Required On Job (ROJ) dates are provided to the project management team., • Document project field issues that impact budget, quality or schedule, and provide to the project management team., • Respond to subcontractor requests for field issues that impact budget, quality or schedule., • Provide oversight for the Superintendent/Foreman for the development and maintenance of a Resource Allocation Control System (RACS)., • Provide guidance in implementation of the Project Quality Assurance/Quality Control (QA/QC) program., • Identify projects with Self-Perform opportunities and assist in the development of the Self-Perform proposal., • Manage Self-Perform performance., • Work in concert with Business Unit Safety Director to implement the BU Safety Program., • Manage Review of Capabilities, Accomplishments and Progress (ReCAP) progress for field trades people., • Maintain a progression/succession plan for all high-potential tradesmen in conjunction with the Operations Manager (OM)., • Manage training for tradesmen., • Support Business Development, Estimating and the Project Executives (PX's) with development of operational plans for all pursuits. #LI-PB1 Qualifications: Bachelor's degree plus a minimum of ten years' related experience or an equivalent combination of education, training and/or experience. Proven written and verbal communications abilities; proficiency with computer applications, including Microsoft Office suite, SAP, SharePoint, etc. Ability to work independently and as part of a team. Must be able to travel 50%+ of the time. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the duties will occasionally require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear (bells, whistles, etc.), stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 50 lbs. Work Environment: While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts, high precarious places; fumes or airborne particles; outside weather and risk of electric shock. The noise level in the work environment is usually moderate to very loud. *May perform other duties as assigned. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Project Manager (DSA/K-12 Construction) Southern California This Jobot Job is hosted by: Katie Collins Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $180,000 per year A bit about us: For over a century, our company has been a leader in the construction industry, delivering large-scale, high-profile projects across the nation. With a reputation for excellence, innovation, and integrity, we specialize in commercial, institutional, and public infrastructure projects, including education, healthcare, aviation, and government facilities. Our team is committed to delivering high-quality construction solutions while maintaining strong partnerships with clients, architects, engineers, and subcontractors. We take pride in fostering a collaborative and inclusive workplace, investing in employee growth, cutting-edge technology, and sustainable building practices. Our company offers opportunities to work on some of the most impactful and complex projects in the industry, making a lasting difference in the communities we serve. Why join us? Job Perks & Benefits: • Competitive salary + potential performance-based bonuses., • 401(k) with company match., • Comprehensive health benefits (medical, dental, vision)., • Paid time off, holidays, and parental leave., • Professional development and career growth opportunities., • Company vehicle or travel reimbursement (for eligible roles). Job Details Position Overview: We are seeking a Project Manager to oversee DSA and K-12 construction projects from preconstruction to completion. This role involves managing budgets, schedules, subcontractors, and project teams to ensure successful, high-quality project delivery. The ideal candidate will have a strong background in public works and educational facility construction, a track record of delivering projects on time and within budget, and excellent leadership skills. Key Responsibilities: • Manage and coordinate all phases of DSA and K-12 construction projects, from planning to closeout., • Develop and track project budgets, schedules, and timelines to ensure timely completion., • Work closely with clients, architects, engineers, school districts, and subcontractors to facilitate smooth project execution., • Oversee contract negotiations, procurement, and vendor management to maintain efficiency and cost-effectiveness., • Ensure all projects meet DSA compliance, quality standards, safety regulations, and school district requirements., • Proactively identify and mitigate potential risks, delays, and cost overruns., • 5+ years of experience in commercial construction project management, specifically in K-12 and DSA-regulated projects., • Bachelor's degree in construction management, engineering, architecture, or a related field (preferred but not required)., • Strong knowledge of scheduling, budgeting, contract management, and project documentation., • Proficiency in construction management software (e.g., Procore, Bluebeam, Microsoft Project)., • Excellent problem-solving, leadership, and organizational skills. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description As an instructor at Engineering for Kids, you will have an opportunity to inspire kids in the coolest hands-on and technology programs around. From 3-D printing, Robotics, Drone Aviation, Virtual Reality and everything in between, your job is to inspire kids to work creatively and collaboratively to solve a variety of challenges presented to them. Engineering for Kids camps are hands on, student led and teacher assisted. No boring lecturing here, just collaboration and fun! We are hiring for multiple positions, valley wide. Many of our instructors are Primary/Secondary School Teachers, Substitute Teachers and college students majoring in STEM or educational fields. This is a great opportunity to add STEM teaching skills and add supplementary income when school is out. We are currently looking for passionate people to join our team for our upcoming spring break camps in March and summer programs. The position is Full Time when camps are in. Full-Time employment over the summer. STEM Coach As an Engineering for Kids Instructor, it will be your responsibility to inspire your students while delivering engaging content to them. You will be trained on the Engineering for Kids curriculum and given all the tools and materials needed to provide personalized instruction. Your specific duties will include: • Teaching the Engineering for Kids programs, • Managing the day-to-day operations of the classes, control inventory, build objects in curriculum while managing assistant teachers and classroom environment, • Developing rapport with students and establishing a fun learning environment, • Communicating student needs to the Program Manager, • Maintaining a positive attitude and demonstrating enthusiasm for teaching our curriculum, • Providing a safe environment for kids by following all facility processes and procedures. Requirements • Establish a fun environment with high energy and enthusiasm, • Flexible and Dependable, • Reliable Transportation, • Resourceful and adaptable, • Experience leading kids in a classroom environment, • Demonstrated classroom management skills, • Bachelor's degree in Education preferred or pursuing a degree in Education or STEM Field, • Level 1 Fingerprint Clearance card or ability to obtain one & background check Job Type: Full Time - Seasonal

Job DescriptionDescription: Position Summary The Avionics Manager oversees all avionics maintenance, troubleshooting, testing, installations, and inspections within the Part 145 Repair Station. This role ensures work is completed in compliance with FAA regulations, manufacturer data, company manuals, and customer requirements. The Avionics Manager leads a team of technicians, manages workflow, ensures proper tooling and equipment are available, and upholds high standards of safety, quality, and efficiency. Key Responsibilities Regulatory Compliance & Technical Oversight • Ensure all avionics work complies with FAA Part 145 requirements, Repair Station Manual (RSM), Quality Control Manual (QCM), and applicable regulations., • Interpret and apply manufacturer maintenance manuals, service bulletins, wiring diagrams, and technical data., • Oversee troubleshooting, repair, installation, testing, and return to service activities for avionics components and systems., • Supervise, train, and mentor avionics technicians; assign tasks based on skill level and regulatory authorization., • Plan and manage workloads to meet customer schedules and turnaround times., • Conduct performance evaluations and support skills development and certification pathways., • Plan, coordinate, and manage avionics projects from initiation through completion, including upgrades, modifications, installations, and customer driven programs., • Develop and oversee project timelines, resource allocation, workflow sequencing, and cross department coordination to meet all operational milestones., • Track project progress, identify risks or delays, and implement corrective actions to ensure on time and compliant completion., • Ensure proper calibration, handling, and control of avionics tooling, test equipment, and special tooling., • Monitor parts needs and coordinate with the Parts Department for procurement of avionics components, equipment, and consumables., • Manage project documentation, work orders, discrepancies, and repair status., • Serve as the technical point of contact for avionics customers, providing status updates and recommendations., • Work with OEMs, repair vendors, and engineering resources to resolve complex technical issues., • Participate in internal audits, corrective actions, and continuous improvement initiatives., • Maintain a clean, safe, and compliant avionics work area., • Evaluate and implement new technology, tools, and processes that improve quality or reduce cost. Requirements: Required • 5+ years of avionics maintenance experience in a Part 145 Repair Station or similar aviation environment., • Strong knowledge of FAA regulations, aircraft electrical systems, and avionics diagnostic/test equipment., • Experience reading and interpreting schematics, engineering drawings, and wiring diagrams., • Demonstrated leadership or lead technician experience., • FCC General Radiotelephone Operator License (GROL)., • A&P or avionics certification., • Experience with specific airframes relevant to the repair station., • Technical Expertise, • Leadership & Team Development, • Regulatory Compliance, • Project Management, • Problem Solving & Decision Making, • Customer Focus, • Planning & Workflow Management, • Combination of hangar and avionics shop environments., • May require travel to support AOG or customer field service needs., • Clean driving record., • Able to pass a background check., • Ability to pass a drug screening test.