Cnc jobs in Phoenix, ArizonaCreate job alerts

Job DescriptionSalary: $25-$29 DOE An "NAP Operator" (Numerical Automatic Programmer) is a role focused on CNC (Computer Numerical Control) machine operation and programming. In Arizona's fabrication industry, this position bridges the gap between mechanical engineering drawings and the physical machining of raw materials, specifically for metal, pipe, or sheet metal parts. Core Responsibilities • MachineSetup & Operation: Calibrate and safely operate heavy fabrication machinery like CNC press brakes, lasers, and waterjets., • Programming & Editing: Input and adjust CNC data, select appropriate tooling, and translate blueprints or mechanical engineering drawings into usable machine programs., • Quality Control: Measure and inspect finished parts using calipers, micrometers, and tape measures to ensure they meet strict dimensional tolerances., • Maintenance & Safety: Perform routine operator-level machine maintenance, troubleshoot minor equipment issues, and adhere strictly to all OSHA-compliant safety standards. Key Qualifications • Experience: Typically requires 1 to 3 years of hands-on experience in a metalworking or manufacturing environment., • Math & Blueprint Reading: Strong shop math skills (fractions, decimals) and the ability to read and interpret mechanical drawings., • Physical Requirements: Must be able to lift up to 5070 pounds, stand for long periods, and comfortably work in non-climate-controlled environments typical of Arizona summers.

Job DescriptionBenefits: • Paid time off, • Competitive salary, • Training & development Small family production machine shop looking for CNC Mill skilled setup machinist/operator. 4 DAY WORK WEEK - NO EVENINGS OR WEEKENDS! PTO, $30 per hour/40 hours a week. Duties: • Follow setup instructions to begin production on new orders., • Run first articles and make necessary changes to offsets or G-code., • Interpret simple dimensions from Blueprints and perform in process inspection., • Set work offsets, tool offsets, and load programs., • Record inspection data., • Replacement of worn or damaged tools (inserts, end mills, drills, etc)., • Preparing tools and tool holders for new operation. Qualifications: • Extensive experience setting up CNC Mills with minimal supervision., • Familiar with Jaws, Fixtures, Tooling, Toolholders, Indicators, etc., • Ability to stand and operate machine for hours at a time., • Ability to read and interpret blueprints on a variety of part types., • Ability to fill out inspection reports., • (Optional) FADAL experience is a plus., • (Optional) GibbsCAM software programming experience is a plus., • (Optional) Ability to to write simple G-code at the machine is a huge plus., • (Optional) CNC Lathe experience is a plus, especially Mazak., • Wages can go up further depending on the optional experience. Perks and Benefits: • Paid time off, • Monday - Thursday work week, 6 am - 4 pm., • Overtime optional and available frequently., • Compensation may go up depending on experience and qualifications.

Job Description Modern Industries is currently looking for Mills Machinist III. We have several openings on 1st and 3rd shift. • 3rd shift: 10% shift differential We are also offering sign-on bonuses: • 1st shift: $2000, • 3rd shift: $4,000 If you're interested, I'd be happy to share more details. Duties/Responsibilities: Loads, Unloads, Starts, and Stops Machines. Monitors the feeds and speeds of machines during the machining process. Watches gauges, dials, and other indicators to make sure machines are working properly and work-pieces meet quality standards. Monitors machines during operation in order to detect dull cutting tools and excessive vibration. Measures dimensions of finished work-pieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures. Calculates and sets machine movements according to drawing specs. Adjusts machine feeds and speeds, changes cutting tools, and/or adjusts machine controls when automatic programming is faulty or if the machine malfunctions. Sets up fixtures, tools, and programs for the operation of machines for first run and repeat parts. Knowledge of machine tools, including their uses and maintenance. Ability to quickly and repeatedly adjust the controls of a machine to exact positions. Ability to control the operations of machining equipment and systems. Ability to determine the type of tools and equipment needed to perform a job. Ability to detect machine errors (i.e. noises, vibrations, etc.). Ability to determine causes of operating errors and to find a solution to the problem. Mathematics knowledge, particularly Trigonometry. Understanding of Metallurgy. Ability to write simple programs. Extensive knowledge of Probe routines and machine macros. Performs other related duties as assigned. Required Skills/Abilities: Knowledge of machine tools, including their uses and maintenance. Ability to quickly and repeatedly adjust the controls of a machine to exact positions. Ability to control the operations of machining equipment and systems. Ability to determine the type of tools and equipment needed to perform a job. Ability to detect machine errors (i.e. noises, vibrations, etc.). Ability to determine causes of operating errors and to find a solution to the problem Knowledge of mathematics, particularly Trigonometry. Understanding of Metallurgy. Ability to write simple programs. Basic programming of probes to set work coordinates and dimension verification Education and Experience: High School Diploma or equivalent. 5-7 years of experience in relevant field. 5S and Lean Manufacturing. Training. Advanced Blueprint Reading. Documentation and Modern’s Production System. Inspection Techniques for Machinists. SPC Charts and Tools. CNC Program Management. Geometric dimensioning and tolerancing. Machine applications, tooling and fixtures. Adjusting boring heads. Physical Requirements: Ability to lift up to 35 lbs. Ability to lift pieces with hoists or cranes. Ability to work standing for periods of time. Special Requirements: • Crane/Hoist Operator Certification. *All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, genetic information or any other protected characteristic under applicable law. You should be proficient in: • CNC Programming, • CNC Machine Installation, • G-Code, • CNC Machine Setup & Changeover, • Machine Setups for Production Runs Machines & technologies you'll use: • CNC Mill (3-4 axis VMC) (Fanuc)

Job DescriptionDescription: Position Description: The CNC Machinist (Mill) plays a vital role in our operations by setting up, and operating computer numerical control (CNC) Mill machines. They are responsible for maintaining safety and quality standards, documenting procedures, and ensuring equipment upkeep to support the achievement of Masterbilt’s business goals and objectives. Essential Duties and Responsibilities: Essential Functions · Plan machining processes by studying work orders, blueprints, and specifications, and interpreting geometric dimensions and tolerances (GD&T). · Set up machines by installing and adjusting chucks, tools, and attachments. · Maintain specifications by observing operations, taking measurements, troubleshooting processes, and adhering to quality assurance procedures. · Ensure safe operations by following safety procedures and regulations. · Conduct preventive maintenance on equipment and troubleshooting malfunctions. · Document actions by completing production and quality logs and staying updated with industry advancements through continuous learning. · Perform other duties, responsibilities, and activities as assigned. Qualifications and Competency Requirements: Experience & Education · High School Diploma or GED, required · Minimum of two years of manufacturing experience required · Minimum of two years of CNC Machining experience required · Proficient with CNC Mill-turn machines including but not limited to: o HAAS VF-5 TR o HAAS UMC750 o DMG Mori DMU 80 eVo with Heidenhain control o Haas GM-2 o Daewoo 3 and 4-Axis mills with FANUC control o Matsuura mills with FANUC control · Understand and accurately complete all job-related paperwork. · Proficient in using micrometers, calipers, and simple gaging tools. · Strong blueprint reading skills to ensure accurate part processing. Additional Attributes · Ability to work independently and closely follow directions · Fundamental knowledge of lean manufacturing principles and techniques · Fundamental knowledge of CNC machining/manufacturing machining principles · High level of attention to detail and ability to multitask. · Excellent communication skills (both interpersonal and written). · Willingness to embrace and actively support the unique culture and values of Masterbilt · Ability to focus on the tasks and details relevant to the position, while also switching quickly between tasks Compliance · Ability to comply with and pass all required background check and drug screening requirements, including but not limited to pre-employment and random drug screening as required/requested. Physical Activities & Working Conditions The physical demands and working conditions described here are representative, but not exhaustive, of those that must be met by an employee to successfully perform the essential functions of this job. This position is typically performed in a production environment and requires the ability to stand for extended periods of up to 6–8 hours. Duties involve frequent sitting, standing, walking, bending, stooping, kneeling, crouching, reaching, squatting, twisting, pushing, pulling, and carrying items. The role requires regular use of hands for operating equipment, keyboarding, and writing, as well as the ability to read, respond, and communicate effectively throughout the day via phone, in-person, and computer. The individual must be able to listen, problem-solve, and respond appropriately in a fast-paced setting, while demonstrating fluency in reading, writing, and speaking English. This position also requires the ability to lift up to 75 lbs. on a sporadic basis. Work Schedule: The typical schedule for this position is Monday-Friday with hours based on a production environment, with occasional nights and weekends, depending on the needs of the position and the organization. Other: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Requirements: Position Requirements: A. Education: High school or equivalent B. Experience: Manufacturing: 2 years CNC Machining: 2 years (Preferred) C. Certification(s): N/A D. Functional Skills: -Must have strong attention to detail • Fundamental knowledge of CNC machining/manufacturing machining principles -Maintains professional and technical knowledge -Familiarity and skill with interpreting technical drawings and blueprints -Demonstrates strong mechanical aptitude -Fundamental knowledge of lean manufacturing principles and techniques -Ability to work independently and closely follow directions is essential E. Technology Aptitude/Skills: Proficient at CNC Lathe machines F. Language Skills: Excellent verbal and written communication, strong ability to create/write work instructions and train others. G. Leadership/Behaviors: Solid collaboration skills, ability to listen to ideas, others, and implement the best enhancements, ability to work with others, be open minded to ideas and try new things. Ability to be positive, conceptualize, and initiate projects effectively. Versatility/flexibility is also key to perform various portions of multiple projects. H. Culture Match Behaviors: Respectful, honest, and steady personality who handles situations with optimism yet holds people accountable; good listener who can be flexible and invoke great ideas to make the best decisions and agile to move from project to project, or department, to help the organization grow and develop. Physical Requirements to Perform Essential Functions: • Ability to operate a motor vehicle, as required for travel in the role, • Ability to stand for up 6-8 hours in one session, • Ability to sit at desk for 2+ hours per day, • Ability to operate keyboard and view computer screen as needed throughout the day, • Ability to write ideas/information in a logical flow as needed throughout the day, • Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day, • Ability to communicate with others via phone, in-person, and computer on-going, • Ability to listen to customers, employees and peers, problem-solve, and respond accordingly, • Ability to read, write and speak English fluently, • Ability to sit, stand, walk, bend, stoop, kneel, crouch, reach, squat, twist, push, pull, and carry items frequently, • Lifting up to 75 lbs. sporadically

Job Description Position Overview: The operator will operate CNC beam-processing equipment (drill lines, coping machines, layout systems, etc.) in a structural steel environment. This role supports beam production per shop drawings, including drilling, coping, and layout, while maintaining accuracy and pace. Key Responsibilities: • Operate CNC beam processing equipment, • Read and interpret shop drawings, • Set up and run material through machines, • Verify parts meet required tolerances, • Perform basic machine adjustments and troubleshooting, • Maintain production flow in a fast-paced environment Preferred Experience: • Structural steel fabrication experience, • CNC equipment and/or DSTV file familiarity, • Experience with overhead cranes/material handling, • General fabrication equipment experience (ironworkers, shears, press brakes, burn tables, saws) Requirements: • Minimum 3 years of fabrication shop experience, • Ability to work in a physically demanding environment (lifting 50+ lbs, standing, bending), • Ability to pass a drug test Compensation & Benefits: • Pay range: $24–$29/hour (DOE), • Health, dental, vision, and life insurance, • 401(k), PTO, holiday pay, and profit sharing About Us: MMI is an industrial contractor and steel fabrication company based in Mesa, AZ, founded in 1974. We are a growing organization with over 120 team members and a strong commitment to our purpose: “To improve the lives of MMI Employees, Customers, & Vendors.” We look for individuals who align with our core values: • Happy – Treat others with respect., • Hungry – Seek growth and adapt, • Hardworking – Driven and quality-focused, • Honorable – Act with integrity and put the team first.

Job Description WHO ARE WE? Horsepower Automotive Group (HPAG), is a leader in the growing automotive aftermarket industry. When you join HPAG, you'll have a unique opportunity to be a part of our exciting and rapidly growing, multi-brand organization. Our brands include Addictive Desert Designs, DV8 Offroad, Flatline Van Co., and Rago Fabrication. We support a collaborative environment and value open participation from individuals with different ideas, experiences, and perspectives. Are you ready to be part of our future? Bend Metal. Build Legends. We're a fully air conditioned facility —a rare find in the Arizona heat. At HPAG you'll be crafting the most innovative off-road truck parts on the market, in-house, made in America, and built to impress. If you love trucks, fabrication, and taking pride in your work this is your place. What We Offer • Air-conditioned facility — because Arizona is no joke, • $20.00–$24.00/hr based on experience with weekly pay, • Monday- Friday 2:00pm–10:30pm, • Paid holidays, • Full benefits package (medical, dental, vision), • All tools and equipment provided Shifts Available • 1st Shift: 5:30am – 2:00pm, • 2nd Shift: 2:00pm – 10:30pm The Role The Press Brake Operator is responsible for the daily operation of press brakes — setup, bending material to spec, basic maintenance, and keeping equipment clean and running safely. Responsibilities • Daily operation of press brake from pre-set programs with minor adjustments for material variations, • Basic setup and loading of tools, • Form parts per specifications to meet quality and production goals, • Maintain and clean equipment regularly, • TRUMPF press brake experience is a plus Knowledge & Skills • Knowledge of sheet metal fabrication and related equipment, • Ability to read and operate basic measurement tools (tape measure, calipers, protractor), • Detail-oriented with a focus on quality and precision, • Self-motivated and responsive to production requirements, • Team player who puts the group's success first, • Ability to work in a fast-paced environment with shifting priorities Requirements • High School Diploma or GED, • Must be 18 or older, • 2 years of fabrication experience preferred, • 2 years of CNC press brake operation preferred It is the policy of Addictive Desert Designs, and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law.

Job DescriptionCompany Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe home is more than just a place — it should be a source of creativity, comfort, and connection. From beautiful walk-in closets and entertainment centers to versatile pantries and home offices, we design custom storage solutions that add value to your life and home by making space for what belongs. Think of it as ‘practical magic.’ Job Description The Machine Operator is responsible for the setup, operation, monitoring, and basic troubleshooting of wood processing equipment. This role includes using wood processing equipment such as automated panel saws, edge banders, CNC routing & drilling equipment, and packing equipment. 3rd Shift: 9:30 PM - 5:30 AM (Sunday to Thursday) What We Offer: • Hourly rates start at $23.24 per hour, • 10 PTO days, 5 sick days, and 10 paid holidays, • 401K retirement plan with company match, • Health insurance - Medical, Dental, and Vision, • Company provided life insurance, • Voluntary overtime available on Saturdays, • Paid 30 minute lunch Duties and Responsibilities: • Operate equipment following all safety processes established within the facility., • Produce the required quality & quantity of parts within established specifications to maximize daily productivity expectations of boards being shipped., • Maintain a log and records of units produced including a record of errors resulting in rejected or discarded pieces., • Inspect equipment prior to use to ensure proper setup and alignment and perform basic and routine adjustments and maintenance., • Maintain a clean, safe, and orderly work area., • Check products per company policy to ensure quality and uniform completion and resolve any identified problems and alert line lead., • Responsible for on/off-loading of products such as tables, rolling racks, or wood crates for eight or more hours, daily., • Produce quality and error-free work., • Ensure proper storage of materials in the warehouse.Qualifications, • Minimum high school diploma or GED required., • Ability to work in all assigned areas of production and perform relief duties when required., • Ability to read and interpret basic mathematical measurements and use/read a tape measure., • Ability to exert up to 50 pounds of force occasionally, ability to frequently stoop, bend and kneel, often reach with hand and arms and grasp, and be able to constantly stand., • Need to have visual acuity to read instructions, operate machines and inspect parts produced., • To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Additional Information Find us on Facebook, YouTube, and Instagram We are an equal opportunity employer. We E-Verify. All your information will be kept confidential according to EEO guidelines.

Job Description Founded in 1902, N. Wasserstrom is a national leader in the manufacturing and distribution of foodservice equipment and supplies. From design through installation, we operate as a global supplier, custom manufacturer, and consolidator of fixtures, furniture, and equipment, delivering flexible solutions to the places where people eat, sleep, work, play, shop, and gather. Our success is driven not just by our national presence, buying power, regional consolidation, logistics operations, creative expertise, and innovative engineering, but by our people. Guided by our core values of Attitude, Effort, Trust, Innovation, and Family, we bring a positive, can-do mindset rooted in teamwork, accountability, and respect for diverse perspectives. We give our best every day by being responsive, resourceful, and resilient, standing by our word and taking ownership of our work. We embrace continuous improvement, encourage new ideas, and learn from mistakes as we push into new territory. Job Summary: This position is responsible for setting up and operating shop machinery to fabricate metal or wood parts for products. Examples of shop machinery include, but is not limited to, saws, CNC routers, and edge banders. Brake Press Operators must be able to read and interpret specifications for parts or products and follow verbal instructions. Brake Press Operators are assigned to a specific area in the manufacturing plant but may also work with other departments. Brake Press Operators may perform other tasks as needed. Essential Duties and Responsibilities • Operate shop machinery to fabricate parts and products, • Load/unload materials onto machines, • Complete basic maintenance and upkeep on machines, • Maintain a clean and organized workspace/shop, • Check work through measuring tools and quality control procedures, • Work with build documents and basic drawings Experience and Education: • Minimum - High School or GED, • Minimum - 1 - 3 months related experience and/or training Position Requirements: • Knowledge of machines used for metal or wood production, such as saws, CNC routers, and edge banders, • Mechanically inclined; ability to work with shop machinery and basic hand tools, • Ability to read a tape measure accurately to 1/16th of an inch, • Ability to add and subtract fractions, • Communicates well with others; speaks and writes clearly; asks for and offers help when needed, • Interpersonal; resolves questions and concerns in a professional manner; maintains confidentiality, • Detail oriented; meets quality standards and demonstrates accuracy and thoroughness, • Organized; completes work in a timely manner; able to prioritize and meet deadlines, • Problem-solver; gathers and analyzes information skillfully and generates suggestions for improving work, • Capable of working independently and as a member of a team; contributes to building a positive team spirit, • Observes and follows safety procedures

Job Description PPS is looking for a skilled CNC Mill Machinist with experience in machine setup and operation to manufacture precision components for clients in the semiconductor, aerospace, defense, and related industries. This is a full-time, permanent opportunity located in a brand-new, air-conditioned facility. The role offers highly competitive pay, excellent benefits, and strong potential for career growth. Key Responsibilities: • Operate and modify CNC programs, • Follow traveler instructions accurately, • Run 3-axis to 5-axis milling machines, • Perform complete machine setups, • Load and unload materials and finished parts, • Measure parts, record inspection data, and meet or exceed production standards, • Interpret complex blueprints, including dimensions, symbols, and notes, • Track and document production counts, • Maintain a clean and organized workspace, • Complete discrepancy/tag documentation as needed, • Collaborate with Engineering to address issues and suggest improvements, • Carry out additional duties as assigned

Job Description We are seeking an experienced and talented Press Brake Operator II to join our team in Chandler, AZ! The Press Brake Technician will be responsible for configuring and operating mechanical press equipment to shape materials used in manufacturing operations. Essential Duties and Responsibilities: · Sets up and operates press brake equipment in order to complete jobs, which may be defined by the number of bends, the complexity of the operation, or the time it takes to complete the job. · Performs operations such as blanking, bending, punching, and forming on a variety of materials based on blueprints and other instructions. · Selects and installs the appropriate tools for the job and performs tracking and machine adjustments. · Strong attention to detail, quality-focused, and willing to learn. Knowledge, Skills, and Abilities: · Ability to read and interpret drawing/print specifications. · Uses precision measuring equipment devices to verify the accuracy of finished products according to the documented procedures. · Completes part router paperwork, updates tracker, and moves the part to the next department. · Performs daily, routine, and preventive maintenance of all tools and equipment. · Documents all issues and inform supervision. · Follows all safety rules and policies. · Performs other duties as required. Educational/Certification Requirement: · High school diploma or GED preferred; or equivalent experience. Work Experience: · 3+ years of experience operating mechanical press brake required Amada CNC experience is a plus

Job DescriptionDescription: Position Summary The CNC Milling Operator 2 is a mid-level CNC milling operator capable of running established milling jobs with moderate independence. This position requires intermediate inspection ability, general GD&T understanding, and the ability to make tool wear offsets. This role is for operators who can maintain production, monitor part quality, and assist with basic tooling or process issues on proven jobs. Key Responsibilities • Operate CNC milling machines (3 axis, 4 axis, 4 axis horizontal, and 5 axis) on established jobs with limited supervision., • Load and unload parts., • Follow documented work instructions, inspection plans, and traveler requirements., • Perform basic part cleaning, deburring, and packaging as required., • Intermediate understanding of precision measurement tools and techniques as instructed including but not limited to calipers, micrometers, go/no-go gauges, etc., • Make basic wear-offset adjustments as required and perform routine tooling changes as outlined by procedures., • Identify worn or broken tooling and notify supervisor., • Identify process variation and notify setup machinists or supervision before producing nonconforming parts., • Identify and escalate to supervisor obvious part defects, tool issues, machine alarms, or process abnormalities., • Accurately record job data and labor in the ERP system and required paperwork, including but not limited to proper part counts, lot control, labor time, and quality data., • Independently keep work area clean, organized, and safe., • Maintain production efficiency and quality standards., • Adhere to company policies and procedures including but not limited to guidelines related to safety, quality, ethics, and attendance. Physical Requirements • Prolonged periods of performing repetitive actions that entail using fine and gross motor skills, bending, and stooping., • Ability to stand for extended periods., • Ability to lift parts/materials with a minimum of 50 pounds at a time., • Visual acuity to read instructions, operate machines, and inspect parts produced. Decision Authority • Will operate established jobs independently., • Must make approved wear-offset adjustments within documented limits., • Must replace simple tooling when trained and authorized., • Will not perform full independent setups., • Will not make program edits. Education and Experience • High school diploma, equivalent diploma, or GED required. This position involves access to export-controlled information and/or items. To be eligible, applicants must be legally authorized to work in the United States and must be able to perform all job duties in compliance with U.S. export control laws and regulations without current or future employer-sponsored export authorization. This job description is intended to provide a general overview of the responsibilities and qualifications associated with this position. It is not intended to be an exhaustive list of all duties, responsibilities, or working conditions. Responsibilities and duties may change at any time based on business needs, and the employee may be required to perform other tasks as assigned. Requirements: 1. Minimum 1 – 3 years of precision CNC milling machining experience preferred., 2. Intermediate mechanical aptitude and hand tool abilities., 3. Intermediate blueprint knowledge required and basic GD&T interpretation., 4. Demonstrated proficiency with a variety of precision measurement tools and methods., 5. Willingness to train precision CNC milling operations, shop math, and inspection methods., 6. Ability to recognize tool wear, poor finish, chatter, burrs, and obvious dimensional drift., 7. Strong written and verbal communication skills with setup machinists, leads, quality, and supervision.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI Fabrication is seeking an experienced Machine Operator Lead to oversee daily production operations while actively supporting CNC machines, press brakes, and other fabrication equipment. This hands-on leadership role is responsible for coordinating workflow, ensuring quality standards, promoting a safe work environment, and supporting the development of machine operators. The ideal candidate is a strong technical operator with proven leadership experience who thrives in a fast-paced manufacturing environment and is committed to continuous improvement. Key Responsibilities • Lead and support a team of machine operators during daily production operations., • Assign work based on production schedules and priorities., • Set up, operate, and troubleshoot CNC machines, press brakes, and other fabrication equipment., • Ensure machines are running efficiently while minimizing downtime., • Verify operators are following work instructions, quality standards, and safety procedures., • Perform first-piece, in-process, and final quality inspections using precision measuring equipment., • Read and interpret blueprints, engineering drawings, and work orders., • Train, mentor, and coach new and existing machine operators on equipment, processes, and best practices., • Coordinate tooling changes, machine setups, and production changeovers., • Monitor productivity and communicate production issues, equipment concerns, and staffing needs to the Production Supervisor., • Assist Maintenance with equipment troubleshooting when necessary., • Maintain accurate production records, machine downtime logs, and operational documentation., • Promote a clean, organized, and safe work environment while enforcing company safety policies.Requirements, • 3+ years of experience operating CNC machines, press brakes, or similar fabrication equipment., • Previous experience leading or mentoring employees in a manufacturing environment., • Strong understanding of machine setup, tooling, and production processes., • Ability to read and interpret blueprints and technical drawings., • Experience using precision measuring instruments such as calipers, micrometers, and gauges., • Strong problem-solving and communication skills., • Ability to prioritize work and manage multiple production demands., • Ability to lift up to 50 lbs. and stand for extended periods. Preferred • Technical certification in machining, manufacturing, or fabrication., • Experience with sheet metal fabrication and production scheduling., • Knowledge of lean manufacturing and continuous improvement practices., • Basic understanding of CNC programming or CAD/CAM systems.Benefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe home is more than just a place — it should be a source of creativity, comfort, and connection. From beautiful walk-in closets and entertainment centers to versatile pantries and home offices, we design custom storage solutions that add value to your life and home by making space for what belongs. Think of it as ‘practical magic.’ Job Description The Machine Operator is responsible for the setup, operation, monitoring, and basic troubleshooting of wood processing equipment. This role includes using wood processing equipment such as automated panel saws, edge banders, CNC routing & drilling equipment, and packing equipment. 2nd Shift: M-F 1:30P – 9:30P What We Offer: • Hourly rates start at $23.32 per hour, • 10 PTO days, 5 sick days, and 10 paid holidays, • 401K retirement plan with company match, • Health insurance - Medical, Dental, and Vision, • Company provided life insurance, • Voluntary overtime available on Saturdays, • Paid 30 minute lunch Duties and Responsibilities: • Operate equipment following all safety processes established within the facility., • Produce the required quality & quantity of parts within established specifications to maximize daily productivity expectations of boards being shipped., • Maintain a log and records of units produced including a record of errors resulting in rejected or discarded pieces., • Inspect equipment prior to use to ensure proper setup and alignment and perform basic and routine adjustments and maintenance., • Maintain a clean, safe, and orderly work area., • Check products per company policy to ensure quality and uniform completion and resolve any identified problems and alert line lead., • Responsible for on/off-loading of products such as tables, rolling racks, or wood crates for eight or more hours, daily., • Produce quality and error-free work., • Ensure proper storage of materials in the warehouse.Qualifications, • Minimum high school diploma or GED required., • Ability to work in all assigned areas of production and perform relief duties when required., • Ability to read and interpret basic mathematical measurements and use/read a tape measure., • Ability to exert up to 50 pounds of force occasionally, ability to frequently stoop, bend and kneel, often reach with hand and arms and grasp, and be able to constantly stand., • Need to have visual acuity to read instructions, operate machines and inspect parts produced., • To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Additional Information Find us on Facebook, YouTube, and Instagram We are an equal opportunity employer. We E-Verify. All your information will be kept confidential according to EEO guidelines.

Job Description Resolute Performance Iron (a Sletten Company) is a specialty steel contractor seeking a CNC Press Brake Operator to complete projects in our shop in Phoenix, Arizona. The ideal candidate will be responsible for setting up and operating press brake machines to bend and shape sheet metal components according to specifications. The majority of our work is in the steel construction industry and solar energy construction. Duties & Responsibilities • Work quickly, productively, and safely without error and consistently meet production goals as set forth by the Foreman, Superintendent, or Project Manager, • Consistently produce quality workmanship as judged by Company standards, • Comply with all company safety and personnel policies, • Set up and operate press brake machines for various metal fabrication tasks, • Read and interpret blueprints and technical drawings to determine specifications and tolerances, • Perform quality inspections on finished products to ensure compliance with specifications, • Fabricate metal components by bending, shaping, and forming materials as required, • Utilize basic math skills to calculate dimensions, angles, and tolerances, • Collaborate with team members to maintain a smooth workflow and meet production deadlines, • Conduct routine maintenance on machinery to ensure optimal performance, • Assist in troubleshooting issues with machinery or production processes as they arise., • Uphold safety as the most important goal of our company., • Support our goal of achieving zero accidentsQualifications, • Proven experience operating CNC press brake machines is preferred, • Knowledge of programming CNC press brake is preferred, • Strong ability in blueprint reading and understanding technical drawings, • Basic math skills for accurate measurements and calculations, • Knowledge of machining processes, including welding, electrical discharge machining, stamping press, and milling machine operations is a plus, • Attention to detail with a focus on producing high-quality work, • Ability to work independently as well as part of a team in a fast-paced environment, • Must be able to climb, bend, stoop, kneel, lift overhead, work at heights, walk/work in rough terrain in order to access equipment, tools, materials, and jobsite in order to complete work.Additional Information, • Shop location is in Phoenix, AZ, • EOE, M/F/D/V welcomed to apply Powered by JazzHR 2207cvkxFa

Job Description WHO ARE WE? Horsepower Automotive Group (HPAG), is a leader in the growing automotive aftermarket industry. When you join HPAG, you'll have a unique opportunity to be a part of our exciting and rapidly growing, multi-brand organization. Our brands include Addictive Desert Designs, DV8 Offroad, Flatline Van Co, Rago Fabrication and C4. We support a collaborative environment and value open participation from individuals with different ideas, experiences, and perspectives. Are you ready to be part of our future? CNC Laser & Press Brake Programmer Horsepower Automotive Group, a leader in the automotive aftermarket industry with multiple off-road and overlanding brands such as: Addictive Desert Designs, C4 Fabrication, Rago Fabrication, DV8 Off-Road and Flat Line Van co, has a CNC Laser & Press Brake Programmer position opening in our Engineering department. Hardworking, positive team players will excel in being involved in the continuous development and introduction of new innovative products into the market. Strong attention to detail and organization skills are a must. Key responsibilities include but are not limited to converting SolidWorks 3D models into flat patterns to laser cut and developing the bend order and programming the tools to work with the CNC press brakes. This position requires critical thinking and some creative process concepts to be successful. Candidates can be trained to use our internal software systems to make the laser cutting programs and bending programs. This position is essential to the success of the entire production line and requires team collaboration throughout the process. Summary of Key Responsibilities Responsibilities and essential job functions include, but are not limited to the following: • Daily tasks of importing 3D models into TruTops Boost to be laser cut and programming press brake bending programs., • Open 3D models within SolidWorks and adding manufacturing features to parts to aid the forming process, • Assist in quality control inspections of the programmed parts Knowledge, Skills, and Abilities: • Ability to work in a fast-paced work environment, • Self-motivated, assertive, and responds to production metrics, • Contributes to building a positive team spirit and puts success of team above own interests, • Ability to read, write, and speak English fluently, • Must be computer literate and able to use normal MS office tools, • Must be familiar with 3D modeling software (SolidWorks), • We are a drug free workplace, so all applicants must be able to pass background check and drug test. Summary of Experience and Education • High school Diploma or GED, • Minimum of two years Laser and Press Brake software hands-on experience, • CNC Press Brake Operator experience a plus, • CNC Laser Cutting Operator experience a plus Compensation Salary: $26 - $28 per hour Hours are 7:00 to 4:00 pm weekdays with minimum after-hours requirements Benefits available after 60-day probation period Job is full-time on location at our main facility in Chandler, Arizona It is the policy of Horsepower Automotive Group, and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law.

Job Description PPS is seeking a skilled CNC Lathe Operator II for our state-of-the-art semiconductor industry fabrication facility in Chandler! This is a full-time permanent role with second-to-none benefits and a high ceiling for advancement! Key Responsibilities: · Set up and operate CNC lathes to manufacture precision components holding tolerances of ±.0005. · Optimize programs and setups to improve efficiency and part quality. · Deburr parts while the machine is running to maintain continuous workflow. · Run multiple machines simultaneously when production demands allow. · Clean and maintain equipment; perform routine preventive maintenance (PMs). · Maintain an organized, clean, and safe work area in accordance with 6S principles. · Read and interpret complex blueprints, engineering drawings, and specifications. · Use precision measuring instruments to verify part conformance to specifications. · Record labor hours, job quantities, and other production data accurately using the labor tracking system. · Complete assigned tasks and production goals on time while maintaining high quality standards. · Collaborate with team members and supervisors to resolve issues and improve processes. · Perform repetitive production work, running large batches of parts efficiently and consistently. The Ideal Candidate Will Possess: • Minimum 2–3 years operating CNC lathes in a precision manufacturing environment., • Proficient in reading and understanding complex blueprints and GD&T., • Experience with GibbsCAM, Mastercam, and SolidWorks preferred., • Familiarity with CNC programming and program optimization a plus., • Strong understanding of tooling, speeds, feeds, and materials., • Strong attention to detail and commitment to quality., • Excellent attendance is required., • Self-motivated, results-oriented, and capable of thriving in a fast-paced production setting., • Ability to work independently and efficiently manage multiple machines., • Haas CNC experience in a plus

Job Description Gear & Spline CNC Operators in Tempe, AZ Aerospace & Defense Manufacturing Looking for experienced gear & spline machinists and apprentice level trainees that would like to learn! Pay would be based on level of related experience. Location: Kimberly Gear & Spline - 1515 W 17th St, Tempe, AZ 85281 Shift: Full time, day shift REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. CNC and manual machine positions available for programmers and operators machining, high precision internal & external splines and gears from 256DP to 2DP in a variety of aerospace components and materials. Job position would involve programming and setup using the latest CNC systems to include German, Japanese and American technology running shapers, hobbers, and gear grinders. Requirements: • Must be at least 18 years old and Authorized to work in the US, • Must be able to lift up to 30 pounds on a regular basis without assistance., • Must be able to stand and/or sit the majority of the shift, • Looking for a self-starter with a great attitude to works well with other team members to perform and support daily company goals., • Punctual Attendance with reliable transportation Pay would be based on level of related experience. Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. CMI Group is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match CMI Group is a federal subcontractor and maintains a drug-free workplace in accordance with the Federal Drug-Free Workplace Act of 1988 and Arizona Revised Statutes § 23-493. All offers of employment are contingent upon the successful completion of a pre-employment drug screening. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act, • Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description About the Company Our client is a leading provider of advanced CNC machine tools, automation solutions, and integrated manufacturing systems. With a strong presence across North America, they support high-precision industries through engineering, installation, service, and technical expertise. The organization is known for its stability, strong customer base, and commitment to innovation in manufacturing. Position Overview We are seeking a highly skilled Senior CNC Service Engineer to support customers across the Bay Area. This role is responsible for installing, maintaining, and troubleshooting high-precision CNC machinery while serving as a key technical resource for customers. This is a senior-level position requiring strong diagnostic capabilities, hands-on expertise, and the ability to support complex service issues in the field. Key Responsibilities • Advanced Troubleshooting & Repair: Diagnose and resolve complex CNC machine issues across mechanical, electrical, hydraulic, pneumatic, and control systems, • Installation & Commissioning: Lead machine installs, setup, calibration, and production integration at customer sites, • Preventative Maintenance: Execute and improve maintenance programs to maximize uptime and reliability, • Customer Support: Serve as a trusted advisor, helping customers optimize machine performance and processes, • CNC Controls: Troubleshoot and support systems including Fanuc, Siemens, Mazak, and Heidenhain, • Documentation: Maintain detailed service reports, diagnostics, and repair documentation, • Emergency Response: Provide timely on-site support to minimize downtime in critical situations, • Safety Compliance: Ensure all work meets safety standards and customer requirements Qualifications • Strong expertise in CNC machine operations, electrical systems, and mechanical troubleshooting, • Experience working with CNC controls such as Fanuc, Siemens, Mazak, or Heidenhain, • Knowledge of servo systems, drives, PLCs, and automation technologies, • Experience with precision alignment tools (laser calibration, ball bar, etc.), • Strong communication skills with the ability to work directly with customers, • Ability to work independently in a field-based role Education & Experience • Associate’s or Bachelor’s degree in Engineering or equivalent hands-on experience, • 8–10+ years of CNC service, repair, and troubleshooting experience, • Strong electrical background with ability to read schematics and prints Travel Requirements • Up to 50% regional travel within the Bay Area and surrounding territory, • Occasional overnight travel may be required Physical Requirements • Ability to lift up to 50 lbs, • Comfortable working in industrial environments (bending, climbing, etc.), • Valid driver’s license required Compensation & Benefits • Competitive hourly rate: $45 – $55/hour, • Comprehensive benefits package (medical, 401k, PTO, etc.), • Strong stability and long-term growth opportunity Additional Information This description is intended to outline the general responsibilities of the role and may not include all duties. Equivalent experience or certifications may be considered in place of formal education.

Job Description Location: Phoenix, AZ Schedule: Monday – Friday (some weekends/overtime possible) Phone: (602) 268-8873 Website: www.alliedmachineworks.com We are seeking an experienced CNC Programmer to create, edit, and optimize CNC programs for milling and turning operations. This role requires strong knowledge of G-code, CAM software (Fusion 360 preferred), tooling selection, and machining strategies. Responsibilities: • Create and optimize CNC programs using Fusion 360 or similar CAM software, • Read and interpret complex blueprints, CAD models, and drawings, • Select appropriate tooling, speeds, feeds, and cutting paths Qualifications: • 3+ years of CNC programming experience required, • Proficient in Fusion 360, Mastercam, or similar CAM platforms, • Strong understanding of G-code and machine setup How to Apply: • Apply in person at: 438 W. Watkins Rd, Phoenix, AZ 85003, • Email your resume to: info@alliedmachineworks.com, • Visit us online: www.alliedmachineworks.com

Job Description Position Summary: Manages and directs engineering department resources and activities. Technical approval responsibility for the design of current production work and new product development activities. Develops and recommends corporate engineering policies and procedures consistent with company objective, including, but not limited to, new product testing procedures, problem solving, and training of engineering personnel. Manages engineering department’s assets, hardware and software, and any of the other related programs or systems within the engineering department. Coordinates with technical support personnel to conduct prototype runs for products or processes. Provides technical responsibility for planning, organizing and coordinating test procedures on current and future designs. Communicates with company personnel on projects, priorities, timetables and budgets as required. Interacts with customers and/or vendors. Develops short term and long term goals of design engineering and research and development. Essential Duties and Responsibilities include, but are not limited to: • Directs department activities to design new products, modify existing designs, improve production techniques, and develop test procedures., • Resolves problems using solutions that involve new techniques, technologies, or concepts., • Analyzes technology trends, human resource needs, and market demand to plan projects., • Confers with management, production, and marketing staff to determine engineering feasibility, cost effectiveness, and customer demand for new and existing products., • Forecasts operating costs of department and directs preparation of budget requests., • Advanced skills with Mastercam, Gibbs Cam, Espree or other CAM software, and CNC machine programming, setup, and operations., • Ability to machine parts to specification of .1mm to .0005mm tolerances working from CAD files, mechanical drawings, and sketches, • Ability to read, understand, and create technical mechanical drawings, sectional views, part notes, dimensions, and tolerances, • Conversational knowledge of G-Code., • Advanced skills in workpiece fixturing., • Expertise calculating/estimating machine cycle times, determining cost effective operation sequences, machinability, and feasibility, • Geometric Dimensioning and Tolerancing knowledge, • Comprehensive understanding of Multi Axis milling, turning, grinding, cutting, EDM, etc. and detailed functional knowledge of most common machine shop tools and machines, • Advises management of new developments which may affect profit, schedule, costs, customer relations, and/or inter-departmental relations., • Provides direction and example for interpretation and application of company policies and procedures to the engineering activities., • Maintains a working knowledge of new technologies which may improve operations and develops recommendations accordingly., • Maintains a working knowledge of safety policies and regulations to ensure duties of self and others are performed in a safe manner., • Other duties as assigned Qualifications: Experience and Education: Bachelor’s degree At least 2 years in a supervisory capacity Technical Skills: Ability to identify and resolve problems in a timely manner or develop alternative solutions Proficient in the use of all Microsoft Office programs and Windows operating system Ability to thrive in a changing, fast-paced growing and dynamic business Detail oriented and able to manage multiple projects simultaneously Strong written and verbal communication skills Excellent organization skills and attention to detail Physical Requirements: Extended screen time Long periods of sitting Potentially long hours Supervisory Responsibilities: Supervises, coordinates, provides leadership to and reviews the work of assigned staff. Directly supervises individual contributors in technical positions and/or entry level professionals. Estimates staffing needs. Assigns work. Recommends candidates for employment and makes recommendations for termination. Conducts performance evaluations and salary reviews for assigned staff. Responsible for the application of company policies. Travel Required: Occasional Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Job Description Night Shift Machinist Positions 20% night shift pay differential CMI Group is looking to hire machinists at our NORTH Phoenix location! Defense & Aerospace Manufacturing (North Phoenix - 101 & Cave Creek Rd). Location: 2688 E Rose Garden Ln, Phoenix, AZ 85050 Shift: Night Shift (20% night shift pay differential) Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. Night Shift Positions: • CNC Lathes, • CNC Mills, • 5 Axis + Machinist, • Deburr / Hand Finisher, • Inspector Requirements: • Minimum High School Diploma or trade school, • Must be at least 18 years old and Authorized to work in the US, • Must be able to lift up to 20 pounds on a regular basis., • Must be able to stand majority of the shift Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. CMI Group is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match CMI Group is a federal subcontractor and maintains a drug-free workplace in accordance with the Federal Drug-Free Workplace Act of 1988 and Arizona Revised Statutes § 23-493. All offers of employment are contingent upon the successful completion of a pre-employment drug screening. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act, • Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description Experienced Night Shift CNC Machinists needed in south Phoenix! CNC Mill, CNC Lathe, Swiss or Grind Machinist Positions Aerospace & Defense Manufacturing Location: 3617 E La Salle St, Phoenix, AZ 85040 Shift: Night shift 20% Differential pay! Department: CNC Mill, CNC Lathe, Swiss Screw, ID Grind or OD Grind REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. RESPONSIBILITIES: • Operate CNC machines without oversight running proven production jobs, • Understand process trouble shooting techniques with the ability to display those attributes, • Demonstrate proper setup techniques, loading, indicating, touch off, of all tooling. Ability to load programs and verify correct operation, revision, etc. Cutting jaws and loading of needed fixtures. First piece buy-off, • Daily machine maintenance (checking fluid levels, cleaning out chips, etc.), • Maintaining a clean and organized work space, • Clear understanding of CNC controls including G & M program codes, • Tool management, entering in offsets without oversight to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars, end mills, drills, etc.), • Ability to read and have a clear understanding of B/P’s including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards, • Proper use of basic inspection, measuring and test equipment to verify machined dimensions of product. Working knowledge of the use of dial bore gages, air gages, intertest gages, etc., • In-process inspection of parts machined. Recording inspection data at the prescribed intervals per the inspection traveler or other company paperwork, • Filling out MOT and job routers, • Maintaining correct part counts on the MOT for the operations performed, • Tagging hardware and recording discrepancies on proper paperwork for hardware known to be discrepant. ALL issues are to be addressed with lead personnel upon discovery, • Communicate any job related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification, • Reporting all machine collisions and malfunctions to lead personnel, • Adhering to all company and industry safety standards and protocols. Understanding of industry buy-off requirements, company specific handling & FOD requirements, product identification requirements, filling out company paperwork properly (MOT, Inspection Travelers, Job Sheets, etc.) Basic Qualifications: • Ability to use computer software, company ERP system, clocking in and out of jobs, etc., • 2+ years of experience running CNC lathes, CNC mills or grinders, • Good understanding of GD&T and industry standards of inspection, • Must be able to stand for the majority of the work shift Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. CMI Group is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match CMI Group is a federal subcontractor and maintains a drug-free workplace in accordance with the Federal Drug-Free Workplace Act of 1988 and Arizona Revised Statutes § 23-493. All offers of employment are contingent upon the successful completion of a pre-employment drug screening. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description Millwork Engineer JBI LLC., dba Western Millwork, Arizona’s largest manufacturer and installer of Architectural Millwork and Casework seeking experienced Engineer to join our drafting/engineering department. REQUIRED ESSENTIAL DUTIES/ RESPONSIBILITIES: Able to read and interpret Architectural drawings. Proficient in AutoCAD. Review scope with team and produce detailed submittal drawings from drawings, scope, and additional information provided by team. Be familiar with typical millwork/casework, trims, and paneling - and their construction. Basic computer skills include, but not limited to, AutoCAD, Microsoft Word, Excel, Outlook, Acrobat reader and basic web/file folder navigation. Excellent communication skills, problem solving abilities, teamwork, time-management skills, and strong attention to detail. Microvellum experience is a plus. Western Millwork will train the right candidates. JOB QUALIFICATIONS: · Bachelor’s Degree or equivalent preferred, not required. · 3+ years engineering experience in architectural millwork manufacturing. · High proficiency in AutoCAD and library use. Experience with Microvellum preferred. · Knowledge of CNC programming and operations. · Knowledge of Architectural Woodwork Standards. · Excellent written and verbal communication skills are required. · Must be self-motivated and team oriented. · Comfortable with a deadline driven schedule with strong time management skill. We request samples of work for review if available. Company DescriptionWestern Millwork dba JBI Interiors specializes in high end Custom Commercial Architectural Woodwork and Finish Carpentry. We pride ourselves in getting the job done on time, we excel at being the best in our industry.Western Millwork dba JBI Interiors specializes in high end Custom Commercial Architectural Woodwork and Finish Carpentry. We pride ourselves in getting the job done on time, we excel at being the best in our industry.

Job DescriptionDescription: Methods Machine Tools was established in 1958 with three employees and a handful of refurbished machines. Since then, the company has become one of the largest privately owned machine tool importers in North America. Job Summary: We are seeking an experienced Field Service Engineer to diagnose, repair, and maintain CNC milling and turning machines at customer facilities. This role involves both mechanical and electrical troubleshooting, requiring a solid understanding of mechanical systems, CNC controls, and electro-mechanical assemblies. The ideal candidate is self-motivated, customer-focused, and has a proven ability to work independently while delivering exceptional service. Mechanical Responsibilities: • Diagnose and repair CNC milling and turning machines at customer locations., • Troubleshoot and repair automatic tool changers, pallet systems, spindles, and turret mechanisms., • Perform ball screw and axis support bearing replacements and alignments., • Repair and align hydraulic and pneumatic systems., • Read and interpret mechanical drawings and part prints to execute precise repairs. Electrical Responsibilities: • Troubleshoot electrical and electronic systems, including CNC controls and electro-mechanical assemblies., • Read and follow ladder and wiring diagrams to diagnose issues., • Utilize tools such as digital multimeters, ohmmeters, and phase checkers for troubleshooting., • Repair CNC controls, including Fanuc systems, and perform programming as needed. Customer Interaction and Support: • Communicate effectively with customers to explain diagnoses, repair progress, and preventive maintenance measures., • Provide professional and courteous customer service to ensure client satisfaction., • Maintain a professional appearance and demeanor when representing the company. Required Skill/Abilities: • Strong verbal and written communication skills., • Proficiency in Microsoft Office Suite., • Ability to stay calm and professional during stressful situations., • Self-motivated with the ability to work independently., • Strong mechanical aptitude, with experience in CNC repair., • Proficient in reading mechanical drawings, part prints, ladder diagrams, and wiring schematics., • Experience using diagnostic tools, including multimeters and phase checkers. Minimum Education and Experience: • Minimum of 5 years of experience in CNC field service., • Hands-on knowledge of Fanuc controls (CNC programming experience is a plus). Supervisory Responsibilities: • None Travel Requirements: • Daily travel to customer facilities Physical Requirements: • Ability to lift up to 50 lbs., • Perform physical tasks such as bending, twisting, and crawling., • Climb step ladders up to 8 feet., • Drive daily to customer locations, with dependable transportation and a clean driving record required. Additional InformationThis job description is designed to provide an overview of basic skills, experiences and education required to perform the job and is not designed to cover or contain a comprehensive listing of all activities, duties, or responsibilities required of the employee to perform the essential functions of the job. In instances where educational degrees are required, the company will take into consideration factors such as additional experience, training, or certifications in lieu of specific educational requirements. Requirements:

Job Description Title: Service Engineer Reports to: Service Coordinator Location: DMG MORI USA- Arizona Hours: Full Time, Core Business Hours Classification: Non-Exempt Travel: 50% or more Annual Base Salary Range: $83k (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Machine installation, maintenance, and repairs., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Provide assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Other duties as assigned. Minimum Requirements: • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers . Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening.

Job Description Position Summary The Purchasing Coordinator is responsible for managing all purchasing activities, maintaining accurate pricing and vendor data, processing POs, coordinating incoming materials, supporting hardware inventory controls, and ensuring the shop receives materials and consumables on time and with full compliance. Primary Responsibilities 1. Shop Releases The Purchasing Coordinator is the primary owner for: • Requisitions, • Steel, Buyouts, Hardware, and Subcontracts (Processing, Sub-Fabrication, etc.), • Link all piece marks in Tekla, • Notify Production Coordinators/CNC Programmers what material has been Reserved as well as what is being procured, • Purchasing, • File all Quotes and POs in the correct Sharefile job folders, • Enter all POs in Vista and Tekla, • Finalize Tekla POs once received, confirming correct pricing and full MTR linkage., • Adjust Vista POs to match Invoices per Accounts Payable as required, • Ensure all Vista POs have the proper Job#/Phase Code/CT, • Enter all Credit Card and 3rd party purchased POs are entered in Tekla for receiving and tracking purposes, • Send JCAs to the Project Admin when reserving Stock inventory, • Monitor promise dates from vendors and resolve discrepancies proactively., • Receiving Hardware/Buyouts, • Receive and tag all hardware and small buyout items in Tekla and stage appropriately., • Maintain an organized hardware rack with all Work Package/PO#s properly labeled.2. Hardware Conex - Maintain accurate inventory for stocked/extra hardware stored in the Hardware Conex3. General Purchasing The Purchasing Coordinator is the primary owner for: • Purchasing – Entered in Vista as a PO or Credit Card with receipt in Expensify, • Repair & Maintenance, • Small Tools, • Supplies, • Consumables, • Current Pricing Index – Maintain Steel index in Sharefile for Estimating and Change Orders, • Vendor Evaluations – Perform annual vendor evaluations and document performance, pricing, reliability, and service qualityKey Interfaces, • Internal:, • Lead Production Coordinator, • CNC Programmer, • Production Manager, • Shipping/Receiving Manager, • Project Manager/Coordinator, • QA/QC Manager, • Maintenance Supervisor, • Plant Manager, • External:, • Vendors Success Measures • Zero unlinked piece marks in Production Control within 24 hours of Shop Release, • 100% of POs in Tekla before received., • 100% of POs in Vista before invoiced., • 95% of Steel, Buyouts, and Hardware received before Date Required., • 98% of purchases charged to the correct Job#/Phase Code/Cost Type in Vista., • 98% of JCAs are sent properly within 24 hours of Reserve., • Pricing index remains current within 30 days of any price change. Additional Information • Office and shop location is in Phoenix, AZ, • Full time position, • Work environment requires the ability to sit, stand, walk on uneven surfaces, and lift up to 50lbs., • EOE. M/F/D/V are encouraged to apply. Powered by JazzHR 7EYs0iAxZ8

Job DescriptionDescription: The Quality Technician plays a crucial role in ensuring the quality of raw materials, purchased components, and production parts throughout the production process. Serving as a representative of the quality department to both internal and external customers, the Quality Technician actively participates in continuous improvement efforts for the quality system. This position is essential for maintaining safety and quality standards, proper documentation, and the maintenance of equipment and gauges to support Masterbilt’s business goals and objectives. Essential Job Functions & Expected Outcomes: • Quality Assurance:, • Inspect incoming materials and components., • Test and inspect parts during and after production to determine product acceptance., • Use calipers, micrometers, and manual and digital gauges to ensure conformance with print specifications and established quality standards., • Coordinate external calibrations and perform internal calibrations on simple gauges., • Interpret part blueprints, material specifications, engineering plans, and geometric dimensions and tolerances (GD&T)., • Operational Maintenance:, • Follow existing policies and procedures, reporting any changes or improvements to Leadership., • Analyze data and review part history to evaluate the reliability of source information., • Resolve testing/inspection problems by checking measuring equipment and communicating issues as appropriate., • Verify calibration and perform preventive maintenance on measuring equipment, troubleshooting malfunctions, and coordinating repairs as needed., • Safety and Professional Development:, • Adhere to all safety procedures and regulations., • Update job knowledge by participating in educational opportunities and reading technical publications. Requirements: • Education: High school diploma or equivalent., • Experience: Minimum of 2 years in manufacturing and metrology experience., • Skills:, • Strong attention to detail and fundamental knowledge of CNC machining/manufacturing principles., • Proficient in Microsoft Office suite, especially Excel., • Excellent verbal and written communication skills., • Ability to interpret technical drawings and blueprints., • Strong mechanical aptitude and understanding of lean manufacturing principles., • Ability to work independently and follow directions closely., • Certifications: Not applicable. Preferred Qualifications: • Experience with ISO 9001 requirements; familiarity with AS9100 and ISO 13485 is a plus. Behavioral Competencies: • Leadership and Collaboration: Demonstrates solid collaboration skills, ability to listen and implement ideas, and work effectively with others., • Adaptability: Versatile and flexible, able to handle multiple projects and tasks, and adaptable to help the organization grow., • Core Values: Exhibits safety-focused behavior, tenacity, hard work, selflessness, teamwork, peaceful coexistence, patience, and perseverance. Physical Requirements: • This position may involve standing, walking, bending, reaching, and use of hands and fingers., • Ability to lift and/or move items up to 50 pounds. Environmental Conditions & Travel: • Regular exposure to an office and manufacturing environment with moderate noise levels., • Occasional requirement to wear suitable Personal Protective Equipment (PPE), such as safety glasses, while in manufacturing departments. Other Information: • Work Hours: 6:00 AM – 2:30 PM, • Supervisory Responsibilities: None., • Product Mix: Includes both aerospace and medical components. Join our team at Masterbilt and be a part of a dynamic environment where quality and safety are our top priorities. Requirements:

Job Description We are seeking an experienced Event Production Manager to lead the on-site execution of live events. This is not a marketing, creative, or content production role. This role is for someone who has hands-on experience running live events, understands audio, video, lighting, and scenic production, and can confidently manage crews, vendors, and real-time show execution in a fast-paced environment. Key Responsibilities • Lead on-site execution of live events, including show flow, crew direction, and problem-solving, • Manage load-in, installation, show operation, and strike of AV, lighting, and scenic elements, • Oversee labor crews, technicians, and vendors on-site, • Advance shows pre-event (run of show, schedules, logistics, technical needs), • Coordinate with internal teams, clients, and partners to ensure seamless delivery, • Troubleshoot technical and logistical issues in real time under pressure, • Ensure events are delivered on time, on budget, and to client expectations Required Qualifications (Must Have) • 3+ years of hands-on live event production experience (corporate events, trade shows, festivals, or touring), • Experience managing on-site crews, vendors, and show execution, • Working knowledge of audio, video, lighting, and staging systems, • Experience with load-in / load-out and live show environments, • Ability to work long hours, nights, weekends, and travel as required, • Strong leadership, communication, and decision-making under pressure Not a Fit If You: • Have only marketing, social media, or content production experience, • Have not worked on-site running live events, • Prefer fully remote or office-only roles What Sets You Apart • Background as a Production Manager, Technical Director, Stage Manager, or Lead Technician, • Experience with large-scale events or complex productions, • Ability to lead teams in high-pressure, fast-moving environments Why Join Us • Established company with 50+ years of industry leadership, • Work alongside a talented, collaborative production team, • Opportunities for growth and advancement, • 100% employer-paid health insurance, plus dental and life coverage, • 401(k), PTO, and additional benefits Apply Today If you’ve run live events on-site, know how to lead crews, and thrive in high-pressure production environments—we want to hear from you. Company DescriptionMerestone is an award-winning production company that specializes in creating custom-designed, high-end environments, including immersive experiences, stage sets, trade show booths, and marketing elements. The company uses advanced equipment like CNC routers, 3D printers, and carpentry tools to bring these designs to life, ensuring a high standard of craftsmanship.Merestone is an award-winning production company that specializes in creating custom-designed, high-end environments, including immersive experiences, stage sets, trade show booths, and marketing elements. The company uses advanced equipment like CNC routers, 3D printers, and carpentry tools to bring these designs to life, ensuring a high standard of craftsmanship.

Job Description About Us: Joined Alloys, a division of Leading Edge Manufacturing (LEM), is headquartered in Phoenix, Arizona. LEM has been a trusted name in the aerospace, precision machining, and defense industries since 1959. Originally founded as Maximet, Inc., and later rebranded as Leading Edge Manufacturing in 2017, we specialize in complex manufacturing processes, including machining, sheet metal fabrication, brazing, heat treating, welding, and non-destructive testing. With AS9100D, ISO9001, and NADCAP certifications, we pride ourselves on producing high-quality precision components and sub-assemblies for a range of industries. Are you an experienced CNC Lathe Operator with expertise in large part machining for the aerospace industry? Joined Alloys, a leader in precision alloy solutions, is looking for a talented professional with 5+ years of hands-on experience to join our dynamic team. MUST BE WILLING TO WORK NIGHTS Key Responsibilities • Operate and maintain CNC lathes to machine large aerospace components with precision and accuracy., • Program, set up, and optimize CNC equipment for large part production, ensuring maximum efficiency., • Interpret technical drawings, blueprints, and specifications tailored for complex, large-scale parts., • Perform quality checks using advanced measuring tools to ensure compliance with strict aerospace standards., • Collaborate with engineering and quality teams to address machining challenges and continuously improve processes., • Maintain machinery and adhere to safety and cleanliness protocols.Qualifications, • 5+ years of experience operating CNC lathes in a manufacturing setting, with significant exposure to large part machining., • Strong understanding of GD&T (Geometric Dimensioning and Tolerancing) and CNC programming for complex components., • Proven ability to machine high-performance alloys used in aerospace applications., • Experience with large-scale production processes, including setup and fixturing for oversized parts., • Exceptional attention to detail and quality assurance mindset., • Strong communication and teamwork skills, with the ability to work collaboratively. What We Offer: • Competitive compensation, • Comprehensive benefits package, including medical, dental, vision, life insurance, short and long-term disability, and 401K, • Paid holidays and paid vacation time, • Opportunities for career growth and professional development, • A supportive, collaborative work environment focused on teamwork and excellence EEO Statement: Leading Edge Manufacturing LLC, dba Joined Alloys, is an Equal Opportunity Employer. We require a pre-employment drug screen, including THC.

Job Description Essential Job Functions: Develops and/or coordinates the creation and modification of manufacturing processes for the fabrication of complex aerospace parts and create CNC Programs. Perform project engineering work in the Engineering Group requiring application of standard and advanced manufacturing techniques, procedures and criteria in developing/improving processes and/or manufacturing systems. Develop thoughts and ideas into engineered solutions with approval from plant management. Effectively participates in a team setting to achieve collective results. Functions: • Identify, create, and apply manufacturing best practices and standards, • Continually seek new manufacturing technology and processing methods that will improve the productivity, cost, quality, and agility of manufacturing, • Develop robust, capable manufacturing processes for the machining of complex aerospace components, • Develop new manufacturing processes and technologies where appropriate, • Serve, when required, as the manufacturing engineering representative on cross-functional projects Knowledge, Skills and Abilities: • Must have the ability to maintain professional customer relationships to correspond with the specific customer’s needs., • Strong interpersonal skills, • Ability to lead cross functional teams, • strong mathematical, analytical and problem solving skills, • technical expertise, • creativity and innovative thinking, • attention to detail, • Strong awareness of safety issues, • communication skills, both verbal and written, • project and time management skills, • A commitment to keeping up to date with technical developments, • The ability to work under pressure and meet deadlines Education and Experience: • Bachelor’s Degree in Engineering, or 5 years of applicable experience, • Must be skilled in the use of 3-D CAD software, CNC Milling & Lathe programming and process development and programming, and GD&T, • Software: SolidWorks, Microsoft Office (Word, Excel, PowerPoint, Outlook), • Knowledge of engineering principles, especially related to machining manufacturing methods and fixturing Preferred: • Experience in Cutting Tool Design and Jig & Fixture Design for Production Equipment, • Experience with Honeywell manufacturing methods is a plus, • Root Cause and Corrective Action experience, • CNC programming experience with CAMWorks is a plus

Job Description The CNC Programmer Machinist is responsible for independently programming and operating 3-axis and 4-axis milling machines to produce precise components. This role involves setting up machines, selecting appropriate tools, and reading blueprints to optimize machining processes. The position requires occasional collaboration with engineering and design teams and offers opportunities for skill enhancement through on-the-job training. Responsibilities • Develop and execute CNC programs for 3-axis and 4-axis milling machines (Fanuc control), • Set up machines and select tools based on job requirements, • Interpret blueprints to ensure accurate production, • Optimize machining processes for efficiency and quality, • Collaborate occasionally with engineering and design teams Required Qualifications • 5+ years of experience in CNC programming and machining, • Proficient in G-code programming and CNC machine operation, • Strong ability to interpret blueprints and perform precision measurements, • Experience with MasterCam CAD/CAM software, • Excellent problem-solving skills and mechanical aptitude, • High attention to detail, • Effective communication skills

Job Description About Us: We are a growing, dynamic company specializing in the fabrication and installation of cabinets and countertops for commercial, multifamily, and residential projects. Our team is driven by a passion for quality craftsmanship, exceptional service, and delivering projects on time. We pride ourselves on creating lasting relationships with our customers and partners, and we’re looking for motivated team members to help us continue to grow and thrive. Position Overview: We are seeking a highly motivated and experienced Cabinet / Millwork Draftsman to join our team. A successful candidate would be responsible for creating accurate cabinet and millwork drawings and support our CNC production workflow. This role is not a generic CAD drafting position. The right person will understand how cabinetry is built, how plans and shop drawings drive production, and how drafting decisions affect CNC output, fabrication, and installation. Key Responsibilities: • Create and revise cabinet / millwork shop drawings, • Interpret architectural plans and field dimensions, • Support Mozaik-based production workflow, • Coordinate with project managers, shop leads, and installers as needed, • Help ensure buildable, production-ready information reaches the shop., • Cabinet Vision, SolidWorks, SketchUp, Bluebeam, Microvellum, and broader CNC / production support experience is a plus Qualifications: • 2 years of experience in cabinet / millwork drafting preferred, • Blueprint reading and shop drawing interpretation, • Cabinet construction knowledge, • Strong attention to detail and ability to work in a fast-paced environment, • Excellent verbal and written communication skills, • Ability to work onsite independently and as part of a team, • Flexible schedule to accommodate job deadlines, • Must be authorized to work in the United States, • Must be willing to undergo a background check and drug screening Why Join Us? • Growth opportunities: As our company continues to expand, there are plenty of opportunities for professional development and career advancement., • Supportive team: Join a collaborative, high-energy team where your contributions will make a direct impact on our success., • Work with the best: Be part of a company known for its exceptional craftsmanship and outstanding customer service. If you're a motivated, organized individual who thrives in a dynamic environment, we’d love to hear from you! Apply today and be a part of our exciting journey as we continue to grow and deliver top-tier projects to our clients. Interested candidates are encouraged to apply by submitting a resume and a cover letter detailing relevant experience. We look forward to hearing from you! Compensation: Pay is $30+/Hour depending on experience. Benefits are available (medical, dental, vision, life, paid time off, etc.) Company DescriptionRCS Countertops & Cabinets is owned and operated by two brothers who have worked in the industry their entire lives. RCS fabricates its cabinets and countertops all under one roof in Tempe, AZ. Installations are done by in-house teams as well. At RCS, we focus on projects in the multi-family industry and we also work with general contractors on commercial and residential projects. We have lots of fun as a team, but our top priority is to have delightful relationships with our customers, our employees, and our suppliers.RCS Countertops & Cabinets is owned and operated by two brothers who have worked in the industry their entire lives. RCS fabricates its cabinets and countertops all under one roof in Tempe, AZ. Installations are done by in-house teams as well. At RCS, we focus on projects in the multi-family industry and we also work with general contractors on commercial and residential projects. We have lots of fun as a team, but our top priority is to have delightful relationships with our customers, our employees, and our suppliers.

Job Description CNC Machinist positions - Experience required! (Aerospace & Defense Manufacturing) DAY or NIGHT Shift 20% Night shift differential pay Location: 3617 E La Salle St, Phoenix, AZ 85040 (40th St and Southern) Shift: Day or Night shift (20% Night shift differential pay) REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. RESPONSIBILITIES: • Operate CNC machines without oversight running proven production jobs, • Understand process trouble shooting techniques with the ability to display those attributes, • Demonstrate proper setup techniques, loading, indicating, touch off, of all tooling. Ability to load programs and verify correct operation, revision, etc. Cutting jaws and loading of needed fixtures. First piece buy-off, • Daily machine maintenance (checking fluid levels, cleaning out chips, etc.), • Maintaining a clean and organized work space, • Clear understanding of CNC controls including G & M program codes, • Tool management, entering in offsets without oversight to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars, end mills, drills, etc.), • Ability to read and have a clear understanding of B/P’s including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards, • Proper use of basic inspection, measuring and test equipment to verify machined dimensions of product. Working knowledge of the use of dial bore gages, air gages, intertest gages, etc., • In-process inspection of parts machined. Recording inspection data at the prescribed intervals per the inspection traveler or other company paperwork, • Filling out MOT and job routers, • Maintaining correct part counts on the MOT for the operations performed, • Tagging hardware and recording discrepancies on proper paperwork for hardware known to be discrepant. ALL issues are to be addressed with lead personnel upon discovery, • Communicate any job related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification, • Reporting all machine collisions and malfunctions to lead personnel, • Adhering to all company and industry safety standards and protocols. Understanding of industry buy-off requirements, company specific handling & FOD requirements, product identification requirements, filling out company paperwork properly (MOT, Inspection Travelers, Job Sheets, etc.) Basic Qualifications: • Ability to use computer software, company ERP system, clocking in and out of jobs, etc., • 2 – 5 years of experience running CNC lathes or CNC Mills, • Clear understand G & M codes for Fanuc based programming, • Good understanding of GD&T and industry standards of inspection, • Must be able to stand for the majority of the work shift Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. CMI Group is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match CMI Group is a federal subcontractor and maintains a drug-free workplace in accordance with the Federal Drug-Free Workplace Act of 1988 and Arizona Revised Statutes § 23-493. All offers of employment are contingent upon the successful completion of a pre-employment drug screening. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act, • Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description CNC Lathe Operator NIGHT SHIFT (20% Pay differential) Aerospace & Defense Manufacturing Location: 3617 E La Salle St, Phoenix, AZ 85040 (40th St and Southern) Shift: Night Shift REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. RESPONSIBILITIES: • Setup & operate to produce high precision aerospace components on ferrous and non-ferrous materials, • Daily machine maintenance (checking fluid levels, cleaning out chips, etc.), • Maintaining a clean and organized work space, • Tool management, entering in offsets to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars. Etc.), • Adhering to all company and industry safety standards and protocols. Understanding of industry buy-off requirements, company specific handling & FOD requirements, product identification requirements, filling out company paperwork properly (MOT, Inspection Travelers, Job Sheets, etc.), • Maintaining correct part counts on the MOT for the operations performed, • Ability to hold tolerances of .0002” - .0005” while maintaining a high level of productivity, • Able to work independently and stay on task – operate 2 machines regularly, • Ability to problem solve and communicate process improvement suggestions with management, • Communicate any job-related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification, • Reporting all machine collisions and malfunctions to lead personnel Required Skills/Abilities: • Familiarity with Mazak machines a plus, • Proficient with standard types of measuring inspection equipment to verify machined dimensions or product – Indicating Micrometers, Bore Gages, Sunnen Gage, & Test Indicators, • Read and interpret of B/P’s including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards and following directions, • Ability to read and interrupt G & M machine codes and program understanding is a plus, • Experience holding tolerances of .0002” - .0005” and surface finish requirements of 16 is a plus, • Strong attention to detail, quality-focused, and willing to learn, • General knowledge of standard shop practices and equipment Basic Qualifications: • High School or GED, • 5+ years’ experience preferred but not required, • Ability to use computer software, company ERP system, clocking in and out of jobs, etc., • Familiarity with Mazak machines a plus, • Familiarity with live tooling a plus, • Must be able to stand for the majority of the work shift Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. CMI Group is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match CMI Group is a federal subcontractor and maintains a drug-free workplace in accordance with the Federal Drug-Free Workplace Act of 1988 and Arizona Revised Statutes § 23-493. All offers of employment are contingent upon the successful completion of a pre-employment drug screening. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act, • Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description Part-Time CNC Machinist positions (Saturday & Sunday only) Aerospace & Defense Manufacturing Location: 3617 E La Salle St, Phoenix, AZ 85040 (40th St and Southern) Shift: Part-Time Saturday and Sunday 6am - 2:30pm (no health benefits offered) REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. CNC Mill or CNC Lathe Responsible for ensuring that every part manufactured aligns exactly with engineering blueprints and technical specifications. Use precision measurement tools such as calipers, micrometers, and depth gauges to verify that finished parts meet strict tolerances. • Operate CNC machines without oversight running proven production jobs, • Understand process trouble shooting techniques with the ability to display those attributes, • Demonstrate proper setup techniques, loading, indicating, touch off, of all tooling. Ability to load programs and verify correct operation, revision, etc. Cutting jaws and loading of needed fixtures. First piece buy-off, • Daily machine maintenance (checking fluid levels, cleaning out chips, etc.), • Maintaining a clean and organized work space, • Clear understanding of CNC controls including G & M program codes, • Tool management, entering in offsets without oversight to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars, end mills, drills, etc.), • Ability to read and have a clear understanding of B/P’s including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards, • Proper use of basic inspection, measuring and test equipment to verify machined dimensions of product. Working knowledge of the use of dial bore gages, air gages, intertest gages, etc., • In-process inspection of parts machined. Recording inspection data at the prescribed intervals per the inspection traveler or other company paperwork, • Filling out MOT and job routers, • Maintaining correct part counts on the MOT for the operations performed, • Tagging hardware and recording discrepancies on proper paperwork for hardware known to be discrepant. ALL issues are to be addressed with lead personnel upon discovery, • Communicate any job related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification, • Reporting all machine collisions and malfunctions to lead personnel, • Adhering to all company and industry safety standards and protocols. Understanding of industry buy-off requirements, company specific handling & FOD requirements, product identification requirements, filling out company paperwork properly (MOT, Inspection Travelers, Job Sheets, etc.) Basic Qualifications: • Ability to use computer software, company ERP system, clocking in and out of jobs, etc., • 2 – 5 years of experience running CNC lathes, • Clear understand G & M codes for Fanuc based programming, • Good understanding of GD&T and industry standards of inspection, • Must be able to stand for the majority of the work shift Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. CMI Group is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match CMI Group is a federal subcontractor and maintains a drug-free workplace in accordance with the Federal Drug-Free Workplace Act of 1988 and Arizona Revised Statutes § 23-493. All offers of employment are contingent upon the successful completion of a pre-employment drug screening. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity ActFair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description SMT Machining is a custom motorcycle wheel manufacturer in the Glendale area. We are a family ran and operated manufacturing facility with 20 years in the motorcycle industry. Job Summary We are a small family owned and operated shop with a large name in the motorcycle industry. We are currently seeking a skilled CNC Machinist to join our dynamic team. The ideal candidate will be responsible for setting up and operating CNC machines to produce precision parts and components according to work instructions and drawing specifications. This role requires a keen attention to detail, strong problem-solving skills, and the ability to work with various machining tools and equipment. The CNC Machinist will play a crucial role in ensuring product quality and efficiency in our manufacturing processes with room for growth as lead machinist. Qualifications: • Knowledge and ability to properly interpret drawings and work instructions., • Ability to use measuring tools including, but not limited to, micrometers, calipers, thread gages, bore gages, dial and test indicators and height gages., • Ability to mount and load tooling, fixtures, vises, jaws and touch off all tooling, set offsets and set work zeros., • Ability to produce a first piece inspection part., • Basic trouble shooting of speeds & feeds, tool application and wear., • Ability to train operators to run and inspect parts approved for production., • Have a clear understanding of the HAAS operation system on both lathe and mills. Duties & expectations: • Operate a CNC machine in a manner that is safe, producing quality product and meeting production expectations set forth by management., • Utilize CNC programs, set up tools, fixtures, work zeros and set up machines with first piece approval., • Work with QC to get the first piece approved and in-process inspection plans in place. Request all inspection or set up gages required to check parts at the machine., • Work with programmers for any technical issues or trouble shooting when needed., • Mentor operators (all shifts) to properly run production and document inspection, as required., • Identify continuous improvement of processes., • Communicate any concerns or issues related to production of parts, safety, and quality to supervisor., • Ensure that the FOD program is being adhered to during production activities., • Only use calibrated measuring equipment whether personal or company supplied., • Handle inspection equipment, machines and parts in a manner that will not cause damage or compromise integrity., • In the event of lack of work or another department needing assistance, you are expected to do any of the following, not limited to: Cleaning, Operator, Manual Machining, Tool Management, Inspection of ongoing production parts., • Maintain a positive attitude and punctuality., • Keep work area clean and organized., • Be a team player in a team-work environment., • Aware of quality policies, procedures, objectives, contribution to conformance of product, safety and ethics. Medical, Dental and Company Benefits offered after 90 days of employment. PTO Hours offered. This is for a full time position from 7am-3:30 pm Mon-Fri Starting pay will be determined based off of experience. Pay will be between $20-$27/ HR With lead machinist opportunity. Company DescriptionSMT Machining is leading the pack in the custom forged billet motorcycle wheels industry. We offer everything from 34′′ big wheels to 18×13 wide chopper wheels with a fit like a glove guarantee for almost any motorcycle out there. We never compromise quality, fitment, or design on any of our custom motorcycle parts and wheels. We’ve been doing this for over 20 years and have become one of the top brands in the nation with more options than any other competitor.SMT Machining is leading the pack in the custom forged billet motorcycle wheels industry. We offer everything from 34′′ big wheels to 18×13 wide chopper wheels with a fit like a glove guarantee for almost any motorcycle out there. We never compromise quality, fitment, or design on any of our custom motorcycle parts and wheels. We’ve been doing this for over 20 years and have become one of the top brands in the nation with more options than any other competitor.

Job DescriptionIs this you? • Fluent in setups and production on CNC lathes?, • At home reading blueprints and dialing in offsets for perfect parts?, • Comfortable verifying results with calipers, micrometers, and gauges?, • Driven to keep machines running safely, cleanly, and efficiently? If so, our team in Gilbert, AZ wants to meet you. What you will do • Set up and run CNC turning equipment to deliver parts to spec, • Interpret drawings/prints to plan tooling and machining approach, • Monitor operations for quality and consistency; make adjustments as needed, • Perform routine maintenance and basic troubleshooting, • Inspect parts and document conformance to requirements, • Maintain a clean, organized, and safe work environment, • Work cross‑functionally to improve cycle times and process reliability, • Follow all company policies, safety practices, and quality proceduresWhat you bring, • High school diploma or equivalent (technical degree preferred), • 5+ years setting up and operating CNC lathes; aerospace experience strongly preferred, • Hands‑on background with Mazak and/or Nakamura machines preferred, • Solid knowledge of machining processes, tooling, and materials, • Proven blueprint reading and documentation skills, • Detail‑oriented problem solver with strong communication, • Capable of working independently while contributing to a teamU.S. Person Requirement Due to compliance with U.S. export control laws and regulations, candidates must qualify as a U.S. Person, defined as: • A U.S. citizen, • A U.S. permanent resident (Green Card holder), • Or an individual with protected status under asylum or refugee designationWhy you’ll like working here, • Work with advanced CNC technologies, • Be part of a tight‑knit, collaborative crew, • Make high‑quality parts in a precision‑focused setting Location: Gilbert, AZ Let’s build something precise together. Apply now.

Job Description Methods Machine Tools, Inc. supplies high-quality, high-precision machine tools and automation solutions, and designs integrated custom machining processes and systems. Headquartered in Sudbury, Mass., and in operation since 1958, Methods provides an end-to-end portfolio of best-in-class products, engineering, service, parts, training, and integration. Methods has more than 300 employees, seven technology centers, one high precision machining center, and has installed in excess of 45,000 machines throughout North America. We currently have the following career opportunity based in Arizona with frequent travel to the following states: CO, UT, NV, NM, ID, WY and MT. Job Summary: We are looking for an experienced Service Engineer to perform the installation, maintenance, troubleshooting, and repair of CNC machines at customer sites. This advanced role requires in-depth technical expertise in CNC machinery, the ability to diagnose complex issues. The position involves frequent travel and direct interaction with customers to ensure optimal machine performance and customer satisfaction. Duties/Responsibilities: • Troubleshooting & Repairs: Diagnose and resolve complex mechanical, electrical, pneumatic, hydraulic, and software-related CNC machine issues., • Installation & Commissioning: Installation and setup of CNC machines, ensuring proper calibration, alignment, and integration with production systems., • Preventative Maintenance: Develop and implement preventive maintenance programs to enhance machine reliability and longevity., • Documentation & Reporting: Maintain detailed service logs, diagnostic reports, and repair documentation. Provide feedback to engineering and product development teams., • Emergency & On-Site Support: Provide rapid response to urgent service calls and critical failures, ensuring minimal downtime for customers., • Compliance & Safety: Ensure adherence to safety protocols, industry standards, and customer requirements when working with high-precision machinery. Requirements: • Knowledge of CNC machine operations, strong ability to read electrical schematics, mechanical systems, and control systems., • Knowledge of automatic tool changers and pallet systems, • Understanding of servo motors, drives, PLCs, and automation systems., • Ballscrew & axis support bearing replacement & alignment, • Excellent verbal and written communication skills to interact with customers, document service activities., • Hydraulic and pneumatic troubleshooting and repair. Minimum Education and Experience: • Applicant should have a minimum of 5 years of experience in CNC field service and knowledge of Fanuc controls. CNC programming experience is a plus., • 8-10 years of experience in CNC machine service, repair, and troubleshooting, with expertise in complex diagnostics., • Strong electrical background., • Understanding of prints / schematics and electrical drawings., • Use of digital multimeter, ohmmeter and phase checker. Supervisory Responsibilities: • none Travel Requirements: • Up to 50% travel, must be willing to travel frequently to customer sites within your territory. (may require overnight stays) Physical Requirements: • Ability to lift up to 50 lbs., • Perform physical tasks such as bending, twisting, and crawling., • Climb step ladders up to 8 feet., • Drive daily to customer locations, with dependable transportation and a clean driving record required. #ZR

Job Description FLAG’s mission is to show our contractors & clients the best this industry can offer by upholding our principles of leadership, service, and exceptionalism. For a Best-in-Class experience, partner with FLAG and allow us to demonstrate how we’re changing the industry, and how we can do the same for you. We are looking to hire a CNC Operator / CNC Machinist in Mesa, AZ 85205. This is a Direct Hire opportunity to join our FLAG Team! CNC Operator / CNC Machinist – 4th Shift Location: Mesa, AZ 85205 Shift: 4th Shift- 6:00pm-6:30am Friday-Sunday Pay Rate: $21.00 – $27.00/hour DOE Employment Type: Contract to Hire Position Summary We are seeking an experienced CNC Operator / CNC Machinist with strong setup, troubleshooting, and precision machining experience in an aerospace or high-precision manufacturing environment. This position is responsible for independently setting up and operating CNC machine tools to manufacture blind fasteners and aerospace components to tight tolerances and engineering specifications. The ideal candidate will have hands-on experience with CNC setup, tooling adjustments, auto-loading systems, SPC, blueprint reading, precision inspection equipment, and troubleshooting CNC machining processes. Key Responsibilities • Setup and operate CNC machine tools including computerized numerically controlled machining equipment, • Adjust tooling, collets, fixtures, and work holding devices for production runs, • Operate and troubleshoot chucker automatic load systems and auto-loading CNC equipment, • Read and interpret:, • Blueprints, • Engineering drawings, • CNC programs, • Technical documentation, • Setup sheets, • Input and verify CNC commands and machine setup parameters, • Perform dry runs and setup verification prior to production, • Troubleshoot machining, tooling, fixture, and programming issues, • Collaborate with programmers and production personnel to resolve operational problems, • Maintain accurate setup cards, production records, and manufacturing documentation, • Utilize SPC (Statistical Process Control) methods to monitor product quality and process performance, • Record production activity and workflow updates in SYMIX ERP/database systems, • Perform in-process inspections using precision measuring equipment including:, • Micrometers, • Calipers, • Indicators, • Comparators, • Precision gauges, • Support Lean Manufacturing, continuous improvement, and production efficiency initiatives, • Assist team members and contribute to overall production workflow and quality objectives Required Qualifications • 3–10 years of CNC machining and setup experience, • Experience operating and setting up:, • CNC lathes, • CNC mills, • Chucker machines, • Auto-loading CNC systems, • Strong knowledge of:, • G-Code, • CNC setup procedures, • Tooling adjustments, • Precision machining, • Aerospace machining standards, • Ability to read and interpret blueprints, GD&T, and engineering specifications, • Experience with SPC and quality control methodologies, • Proficiency using precision inspection instruments and measuring equipment, • Familiarity with ERP/MRP systems such as SYMIX, • Strong troubleshooting and problem-solving skills, • Ability to work independently in a fast-paced manufacturing environment, • Strong written and verbal communication skills Preferred Experience • Aerospace manufacturing, • Blind fastener manufacturing, • Tight tolerance machining, • Lean Manufacturing, • Continuous Improvement environments, • High-volume precision production machining, • Journeyman machining or trade school background Work Environment This position operates in a manufacturing and machine shop environment with exposure to: • CNC machinery, • Moving mechanical equipment, • Cutting oils and metalworking fluids, • Noise and airborne particles Proper PPE and adherence to all safety procedures are required. Qualified candidates are encouraged to apply immediately for consideration.

Job Description Global Thermoforming Inc. is expanding, and we’re looking for a skilled CNC Operator with programming experience to join our growing team. If you take pride in precision, efficiency, and producing high-quality parts, we want to hear from you. What You’ll Do • Set up, operate, and run CNC mills and/or routers, • Program parts using CAM software (Fusion 360, Mastercam, or similar), • Interpret blueprints, CAD models, and work instructions, • Optimize tool paths and machining processes for efficiency, • Perform quality checks using measuring tools (calipers, micrometers, etc.), • Troubleshoot machining issues and make real-time adjustments, • Collaborate with engineering and production teams What We’re Looking For • 3+ years CNC operating experience (mills, routers, or similar), • Strong programming experience (G-code and/or CAM software), • Ability to read and interpret technical drawings, • Attention to detail and commitment to quality, • Experience with plastics and/or aluminum machining is a plus, • Reliable, self-motivated, and team-oriented What We Offer • Competitive pay based on experience, • Stable, growing company with long-term opportunity, • Clean, well-equipped shop environment, • Opportunity to work on diverse, custom projects, • Health benefits and paid time off (if applicable) Why Global Thermoforming? We’re more than just a plastics manufacturer—we’re a full-service fabrication partner offering CNC machining, forming, finishing, and assembly all under one roof. You’ll be part of a team that values craftsmanship, innovation, and getting the job done right. Company DescriptionSmall business, family oriented. Have been in business for 31 years.Small business, family oriented. Have been in business for 31 years.

Job Description We are hiring as soon as possible! Join our dynamic manufacturing team as a CNC Swiss lathe and Lathe Operator and play a vital role in producing high-precision components for the defense and aerospace industries. As a key contributor to our manufacturing facility, you will fully operate, set up, and maintain our Tsugami CNC Swiss lathe and Okuma lathe to ensure efficient production and top-quality output. We value motivated individuals who thrive in a fast-paced environment and are eager to grow their expertise in machining technology. Duties • Operate a Tsugami swiss screw machine as well as an Okuma lathe, ensuring precise execution of complex machining programs, • Read and interpret blueprints, technical drawings, and GD&T specifications to produce accurate parts, • Set up tooling, perform dry runs and be able to fully operate our Tsugami Swiss lathe, • Conduct routine inspections using precision measuring instruments like calipers and micrometers to verify part dimensions and quality standards, • Perform routine maintenance on the machines, including keeping them clean and operating efficiently., • Maintain detailed documentation of production activities, quality checks, and machine settings for traceability and continuous improvement Skills • Strong knowledge of operating CNC swiss lathe machines, lathe operating is a plus, • Proficiency in blueprint reading and understanding GD&T for accurate manufacturing, • Familiarity with Tsugami Swiss controls for changing offsets and running programs, • Basic math skills necessary for calculating dimensions, tolerances, and machine settingsCompany DescriptionHours are Monday-Thursday 6 AM to 4 PM, with optional overtime on Fridays if interested.Hours are Monday-Thursday 6 AM to 4 PM, with optional overtime on Fridays if interested.

Job Description *This role is being filled directly. We do not accept unsolicited outreach from staffing agencies or third-party recruiters. Applications and referrals submitted by third-party recruiters will not be accepted, reviewed, or eligible for placement fees. Position Summary We are seeking a Quality Engineer with deep expertise in gear metrology and CMM-based inspection to join our precision aerospace manufacturing team. This role owns dimensional and geometric quality of gear components produced on Mazak CNC multi-tasking platforms, from in-process checks on the production floor through final CMM verification and First Article Inspection (FAI). Experience with Hexagon CMM hardware and Quindos metrology software for gearing is strongly preferred. You will work cross-functionally with Manufacturing, Engineering, and Programs to ensure every part leaves conforming to drawing and AGMA specifications. Key Responsibilities • Program and operate CMM equipment, preferably Hexagon platforms using Quindos, to inspect involute gears, splines, and related features; PC-DMIS or Calypso experience also considered, • Develop and maintain in-process inspection plans and control plans for gear operations and use of gear data performed on Mazak CNC multi-tasking machines (turning, milling, gear cutting), • Evaluate gear geometry parameters — lead, profile, pitch, runout, tooth thickness, and surface finish (Ra/Rz), against engineering and AGMA tolerances, • Partner with Mazak machine operators and setup technicians to identify in-process quality signals and prevent non-conformances at the source, • Lead First Article Inspection (FAI) activities per AS9102 for new gear programs and engineering changes, • Drive nonconformance (NCR), MRB disposition, and CAPA processes using 8D, 5-Why, and Fishbone root-cause methods, • Perform and interpret Gage R&R / MSA for functional gauges, hard gauges, and CMM routines used in gear inspection, • Apply SPC and process capability analysis (Cpk) to CNC gear manufacturing processes; lead improvement initiatives to reduce scrap and rework, • Ensure compliance with AS9100 and ISO 9001 QMS; support internal, customer, and third-party audits, • Interface directly with customers on quality issues, waivers, deviations, and corrective action closure, • Train operators and inspectors on in-process gear inspection techniques and quality standards Minimum Qualifications • Bachelor's in Mechanical, Manufacturing, Industrial, or Aerospace Engineering or equivalent hands-on experience, • 3+ years of quality engineering experience in aerospace, defense, or precision gear manufacturing, • Hands-on CMM programming and operation, preferably with Hexagon equipment and Quindos; PC-DMIS or Calypso also considered, • Demonstrated knowledge of gear geometry inspection: involute profile, lead, pitch, runout, spline measurement, • Proficiency reading GD&T per ASME Y14.5 and gear engineering drawings, • Working knowledge of AS9100 / ISO 9001 QMS requirements, • Experience with NCR, MRB, and structured CAPA (8D, 5-Why), • Familiarity with AGMA gear accuracy standards, • ITAR compliance requires require that all personnel with access to controlled materials, technology, and data be U.S. Persons as defined under 22 C.F.R. § 120.62 — specifically, U.S. citizens, lawful permanent residents, or individuals with protected status under 8 U.S.C. § 1324b(a)(3) Preferred Qualifications • Experience reading and interpreting Mazatrol CNC programs and setup sheets to support in-process quality verification, • Experience with dedicated gear metrology equipment (Gleason, Klingelnberg, Zeiss gear checkers) in addition to Hexagon/Quindos, • Familiarity with gear manufacturing processes: hobbing, shaping, grinding, shaving, lapping, • ASQ CQE, CQA, Six Sigma Green/Black Belt, or AS9100 internal auditor certification, • FAI experience per AS9102; PFMEA, Control Plans, APQP deliverables, • Knowledge of special processes: heat treat, shot peen, NDT (MT, PT, UT), coating/plating as applied to gears, • Supplier quality experience including SCAR management and incoming inspection, • ERP/MES and electronic QMS (eQMS) tool experience, • Surface finish measurement experience (profilometer, Ra/Rz evaluation) Why Join Us? • Work in a high-quality, aerospace manufacturing environment, • Opportunity to impact product quality, compliance, and customer satisfaction, • Collaborative team focused on continuous improvement and operational excellence, • Career growth and professional development opportunities, • Comprehensive medical, dental & vision, • Paid vacation and sick time *This is an on-site position. We are currently unable to offer relocation assistance, and candidates local to the Tempe/Phoenix metro area are encouraged to apply. All offers of employment are contingent upon successful completion of a pre-employment background check and drug screening. Tube Specialties, Inc. in Tempe, Arizona is a small business that specializes in precision tube fabrication for the Aircraft/Aerospace and Defense industries. Founded in 1973, TSI is dedicated to delivering high-quality, intricate assemblies, including complex manifolds, bent assemblies, and critical components for fighter jets and anti-ballistic missiles. We pride ourselves on our commitment to excellence and innovation. TSI possesses most aerospace certifications (AS9100, NADCAP) as well as we are an E4B4 security company. 7:00am - 3:30pm

Job Description Are you interested in seeing your design go from concept to reality in a matter of weeks, all within the same building? Do you want to interact with and meet the demands of all facets of a company as you grow your career? Are you looking to apply your knowledge in a practical and meaningful way for a leading manufacturer? At SV Microwave, a division of Amphenol, we distinguish ourselves by the quality of our people - high energy, results-oriented individuals - and by being the strongest engineered solution company for our products in the world. SV is a recognized leader in RF and microwave connectors, cable assemblies, and resistive products. Our success is dependent on the ability of our people and, likewise, our people are committed to the success of SV. As a Mechanical Engineer in the Design group at SV Microwave, you will: • Develop manufacturable designs of product using SolidWorks modeling techniques and mechanical tolerance analysis, • Regularly communicate with internal customers (Sales, Quality, Manufacturing) and external customers to define project objectives and updates, • Work directly with SV Applications Engineers and have the opportunity to travel to interact directly with customer engineers to fulfill demand on custom product, • Lead design reviews on complex product with a multidisciplinary group prior to release, • Specify testing protocols/experiments and oversee assembly of prototypes to validate your designs, • Troubleshoot root cause design and component failures and field returns using both experimental and analytical methods. Recommend & implement corrective actions., • Work cooperatively with on-site manufacturing organization to meet production requirements and cost reduction goals through design for manufacturability, • Interface with industry, tradeshows, and evaluate competitors to analyze and recommend new advances in technology, • Perform other duties as assigned and/or required Requirements: • Bachelor's in Mechanical, Manufacturing or Industrial Engineering, • Excellent analytical and IT skills, • Working knowledge of CAD and engineering simulation tools Desired Traits: • Assertive and driven, continuous improvement mindset, • Familiarity with tolerance stack up, • Understanding of CNC machining methods and limitations What we offer: • A challenging, supportive work environment based on trust, transparency and a dedication to excellence, • A meritocracy where a high level of achievement and contribution is rewarded, • Financial security through competitive compensation, incentives and retirement plans, • On the job training and continuous career development opportunities, • 401k with a company match plus an additional employer-paid contribution, • Healthcare including medical, dental and vision, life and disability, • 15 days of Paid Time Off to start and 12 paid holidays, • Tuition reimbursement opportunities and education loan repayment assistance, • The stability of a company with a record of strong financial performance, • Veteran and military-friendly environment, • Complete benefit package includes medical, dental, vision, life insurance, tuition repayment assistance, EAP, a 401k company matched contribution and a 401k non-elective company contribution.This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US Person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3) or eligible to obtain required authorizations(s) from the U.S. Government. Drug free work environment/An Equal Opportunity Employer, Minority/Female/Disabled/Vet/Sexual Orientation/Gender Identity or National Origin Powered by JazzHR 0wxNMhYy6n

Job Description Under general direction of the Director of Engineering, the Mechanical Design Engineer is responsible for new product, mechanical design, product improvements, documentation, production fixture design, reliability analysis as well as providing technical expertise and product knowledge using a variety of engineering disciplines. The Mechanical Design Engineer will also work collaboratively with other members of the Engineering team to ensure that projects are completed in a timely manner. Essential Duties and Responsibilities • Lead engineering projects covering the company’s range of technology and product areas, • Design and develop complete devices that integrate mechanical, electrical/electronic components, • Interact with Product Management, Marketing and Customers to fully understand product requirements and develop cost effective and innovative solutions, • Create solid models and drawings for assembly, components, tooling and fixturing in SolidWorks, • Perform Finite Element Analysis on high stress components, • Work with internal and external vendors and consultants to create and test functional prototypes of new devices, component changes, and design improvements, • Create designs that are aligned with assembly and manufacturing capabilities; perform Design-for-Manufacturing reviews, • Work with Manufacturing Engineering to develop assembly, process control and quality workmanship procedures, • Perform product verification and validations according to the defined design inputs and product specifications, • Develop multi-level Bill-of-Materials, • Write reports, specifications, correspondence, and procedures, • Ensure products comply with and are certified to applicable specifications and regulatory standards, • Stay abreast of any new technologies, including design software, rules, design practices etc., • Perform functional testing and troubleshooting of electronic products, • Perform schematic design, analysis, and Simulation of electronic circuits, • Provide guidance to internal and external sources for PCB layout, • Lead and train members of the Design Team, • Work closely with a wide variety of internal and external customers to define, meet or exceed design parameters during the design phase., • Interface with customers on test related issues when applicable, • Perform other tasks as assigned by manager Job Requirements • BS in Mechanical Engineering, • 3+ years of Mechanical Engineering experience, preferred, • Proficient in software tools including Solid Works, 3D CAD modeling and Microsoft Office applications, • Knowledge of ISO 9001 and AS 9100 structure and requirements, • Expertise with tools such as FMEA, FEA, DFM and statistical techniques, • Strong communication and interpersonal skills to effectively interact with staff at all levels in the organization, • Understanding of commodities including: cable harnesses, CNC milling/lathe, PCBA, box-builds, and electronic components, • Excellent problem solving, data analysis, deductive reasoning and critical thinking skills, • Ability to occasionally lift up to 50 pounds

Job DescriptionEssential Functions / Responsibilities: • Supervise the CNC setup department and ensure the timely completion of all production requirements, • Coordinate with the engineering and production teams to ensure that all machines are running efficiently, • Train and mentor new CNC setup operators, • Monitor and maintain the safety standards of the CNC setup department, • Continuously improve the CNC setup process to optimize production efficiency, • Safety Sensitive Position, • Other duties as needed or requiredWork Environment: The primary work environment is the production floor. Secondary work environment is the office. • Able to lift and/or move up to 50 pounds., • Able to wear Personal Protective Equipment (PPE) through the entire shift., • Ability to be aware of surroundings for safety concerns., • While performing duties of this job the employee will be required to frequently stand on their feet for extended periods of time. Occasion stooping and walking will be required.Required Skills and Qualifications:, • Minimum of 5 years of experience in CNC setup operations and supervision, • Mazak Experience Preferred +++, • Strong knowledge of CNC programming and machine operation, • Proficient in reading and interpreting technical drawings and blueprints, • Excellent communication and leadership skills, • Ability to work in a fast-paced environment and meet production deadlines. Special Requirements: -Safety Sensitive: This job is designated by Valley Forge & Bolt Mfg. Co. as a safety-sensitive position because it includes tasks or duties that Valley Forge & Bolt Mfg. Co. in good faith, believes could affect the safety or health of the employee performing the task or others (ARS 23-493). An applicant or incumbent may be disqualified, disciplined, or terminated, if they are determined to be positive for marijuana or its metabolites, regardless of cardholder status. -Drug-Free Workplace Act of 1988. Valley Forge & Bolt Mfg. Co. is a federal contractor. Applicants who receive a conditional offer of employment will be subject to urinalysis and/or blood screening or other medically recognized tests designed to detect the presence of alcohol and/or drugs as a condition of employment. Further, as a condition of continued at-will employment, employees are subject to urinalysis and/or blood screening or other medically recognized tests designed to detect the presence of alcohol and/or drugs as set forth in the Company's Drug-Free and Alcohol-Free Workplace Policy and Substance Abuse policy. Refusal to take such tests may result in withdrawal of a conditional offer of employment or termination of employment. Applicants will be considered without discrimination because of race, color, religion, sex, national origin, ancestry, citizenship, age, physical or mental disability, veteran or military status, genetic information, pregnancy, or any other category protected by applicable law. Valley Forge & Bolt Mfg. Co. also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and applicable state and local laws. Powered by JazzHR Qn3T6ZZYua

Job Description Job Title: Quality Engineering Manager Job Description The Quality Engineering Manager develops, maintains, and continuously improves the company’s Quality Management System while ensuring that all products and processes meet customer, regulatory, and industry requirements. This role provides hands-on leadership for quality assurance activities, supports manufacturing and engineering, prepares the organization for AS9100 and NADCAP compliance, and champions a strong culture of continuous improvement in a high-mix, low-volume aerospace manufacturing environment. Responsibilities • Lead, mentor, and develop quality personnel while fostering a culture of quality and accountability across the organization., • Maintain and continually improve the AS9100-compliant Quality Management System and ensure adherence to customer, regulatory, and industry requirements., • Coordinate and lead AS9100, NADCAP, customer, and internal audits, including planning, preparation, execution, and follow-up on corrective actions., • Oversee First Article Inspections in accordance with AS9102, including inspection activities, product traceability, calibration, and quality record retention., • Ensure products conform to engineering drawings, customer specifications, and contractual quality requirements., • Lead root cause investigations and drive corrective and preventive actions to eliminate recurring quality issues., • Monitor, analyze, and report quality performance metrics through Management Review and recommend targeted improvement initiatives., • Partner closely with Engineering, Manufacturing, Purchasing, and Operations to resolve quality issues and improve manufacturing processes., • Serve as the primary quality representative for customers, suppliers, and regulatory agencies on all quality-related matters., • Develop, maintain, and control quality procedures, work instructions, forms, and related documentation., • Support supplier quality activities, including supplier evaluations, corrective actions, and performance improvement initiatives., • Promote Lean Manufacturing and continuous improvement initiatives to improve quality, reduce waste, and enhance operational performance., • Provide hands-on support when needed, including backing up quality technicians and inspectors and performing inspections and hand measurements., • Perform additional duties as assigned in support of company objectives and evolving business needs. Essential Skills • 8–10+ years of progressively responsible aerospace quality engineering experience, preferably in smaller companies where individuals perform a wide range of tasks., • Experience administering an AS9100 or ISO-based Quality Management System, including leading (not just participating in) AS9100 audits., • At least 2 years of experience leading and running AS9100 audits, customer audits, and NADCAP audits, including those for paint and anodizing processes., • Experience preparing for and participating in NADCAP audits., • Experience with AS9102 First Article Inspection Reports and FAIR 9102 requirements., • 8+ years of experience performing root cause analysis and driving corrective and preventive actions., • 3+ years of experience managing small teams of Quality Inspectors, Technicians, or Quality Engineers (approximately 1–4 people)., • Strong aerospace quality engineering background, including exposure to major aerospace supply chains and customer quality portals., • Ability to interpret engineering drawings and specifications and apply geometric dimensioning and tolerancing (GD&T)., • Experience with calibration systems and maintaining product traceability and quality records., • Working knowledge of Microsoft Office and ERP/MRP systems, with at least 8 years of experience using ERP systems., • Bachelor’s degree in Engineering (such as Mechanical, Industrial Manufacturing, Aeronautical, Electrical, or Chemical) or equivalent experience., • Strong communication, leadership, and interpersonal skills, with the ability to balance assertiveness and diplomacy when addressing quality issues., • Ability to independently lead and run AS9100 audits and customer audits from day one. Additional Skills & Qualifications • Experience working in smaller aerospace companies where team members frequently wear multiple hats and support hands-on activities., • Experience managing or backing up quality technicians and inspectors, including performing hand measurements and inspection tasks as needed., • Familiarity with customer audits and quality portals for major aerospace companies such as large airframe and engine manufacturers., • Experience with JobBOSS or similar ERP systems., • Experience with Keyence CMM systems and CMM inspection., • Experience with CAPA processes and root cause failure analysis., • Comfort working in a dynamic environment undergoing transitions, such as transferring work from another facility and updating manufacturing documentation, drawings, bills of material, and work instructions., • Entrepreneurial mindset with the ability to accomplish goals using available resources and adapt to changing priorities., • Team-oriented approach with a willingness to take on any task necessary to support quality and production goals. Work Environment The role is based in an aerospace CNC machine shop that operates vertical and horizontal mills and lathes in a high-mix, low-volume contract manufacturing setting. The facility focuses on producing components such as cockpit instrument cluster housings, avionics chassis, and thermal heat exchangers for avionics systems. The organization is relatively small, with around 30 employees, and the quality team currently consists of the Quality Engineering Manager and one Inspector. The environment emphasizes close collaboration between quality, engineering, and manufacturing, and team members often perform both leadership and hands-on duties. The company is in the process of consolidating work from another location, which involves updating and improving manufacturing documentation, drawings, bills of material, and work instructions. The shop environment includes typical aerospace machining operations and inspection activities, with the use of ERP systems such as JobBOSS and metrology equipment including CMMs. Job Type & Location This is a Permanent position based out of Phoenix, AZ. Pay and Benefits The pay range for this position is $100000.00 - $120000.00/yr. Medical Dental Vision, they have several different plans to choose from which we have on file. Workplace Type This is a fully onsite position in Phoenix,AZ. Application Deadline This position is anticipated to close on Jul 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionJob Title: CNC Mill Setup Operator Job Description The Machining Setup Technician is responsible for preparing CNC machining operations for production by setting up machines, tooling, fixtures, and programs. This role ensures safe, efficient, and repeatable manufacturing and serves as a technical resource to support production machinists. The technician ensures that all parts meet engineering, quality, and customer requirements. Responsibilities • Set up CNC machines for production by installing tooling, fixtures, work-holding, and machine offsets according to approved setup documentation., • Load, verify, and prove out CNC programs to ensure machines are production-ready before release to machinists., • Produce and inspect first-piece parts, making necessary machine and tooling adjustments to achieve dimensional conformity., • Ensure that tooling, cutting tools, gauges, and required materials are available and ready before production begins., • Troubleshoot setup, tooling, fixture, and machining issues to minimize downtime and maintain production schedules., • Provide technical assistance to production machinists during job startups and machine changeovers., • Perform tool changes, offset adjustments, and setup corrections throughout production as needed., • Collaborate with Engineering, Quality, and Production to resolve manufacturing issues and improve setup efficiency., • Maintain machines, tooling, and work areas in a safe, clean, and organized condition, adhering to all company safety and quality requirements., • Perform other duties as assigned in support of manufacturing operations.Essential Skills, • Minimum 5 years of CNC machining and machine setup experience., • Ability to read engineering drawings, GD&T, and manufacturing documentation., • Working knowledge of CNC controls, cutting tools, work-holding, and machining practices., • Proficiency in using precision measuring equipment., • Strong troubleshooting, mechanical, and organizational skills.Additional Skills & Qualifications, • Familiarity with AS9100 or regulated manufacturing environments is preferred., • High School diploma or equivalent; technical machining education preferred.Why Work Here? Join a dynamic team where you will have the opportunity to work in a challenging and rewarding environment. Our workplace fosters continuous learning and development, with the chance to collaborate with various departments to enhance your skills and knowledge. We value safety, quality, and a clean working environment, offering a supportive culture for all employees. Work Environment The work environment is a regulated manufacturing setting, with a standard shift from 6 AM to 2:30 PM. Employees are expected to perform visual inspections and must be able to lift up to 50 lbs and stand for long periods. The company provides all necessary tools and equipment to ensure a safe and efficient workspace. Job Type & Location This is a Permanent position based out of Phoenix, AZ. Pay and Benefits The pay range for this position is $28.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Phoenix,AZ. Application Deadline This position is anticipated to close on Jul 22, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description CNC LATHE MACHINIST NEEDED McFarland Machine & Engineering Immediate job openings. We are looking for a CNC Lathe machinist. Willing to work in a fast pace CNC machine shop. We have a competitive benefit package including holiday pay, health insurance, and 401K We are a Machine shop/ Metal Fab shop with 30+ CNC Machines with available: 1st shift hours 7:00 am - 3:30 pm Monday-Friday. Qualifications: 3+ years' experience on CNC Lathe. Must be proficient with measuring tools, Calipers, Mics, Bore Gages, Etc. Must have experience working with blue prints, following traveler/router instructions and strong communication skills. Experience with multi-axis lathes necessary Preferred experienced in job shop environment. Ability to set-up, debug jobs and edit G&M code as needed. Mastercam programming a plus Machines: Okuma, Mori Seiki, Hitachi Seiki, Puma Daewoo, Nakamura Tome.. McFarland Machine & Engineering wants to share in your success. If you are looking for a great company to work for in the south Tempe area please reply to this ad. Company DescriptionEstablished in 2001, McFarland Machine & Engineering offers a wide variety of manufacturing processes not commonly found in one company. At McFarland Machine, we use the latest software and tooling available for designing, programming and machining. We reinvest in technology and training to continually improve our processes.Established in 2001, McFarland Machine & Engineering offers a wide variety of manufacturing processes not commonly found in one company.\r\nAt McFarland Machine, we use the latest software and tooling available for designing, programming and machining. We reinvest in technology and training to continually improve our processes.