Engineering jobs in Centereach, New YorkCrear alertas

Job DescriptionPart Time Electrical Engineer needed for preparing prototypes and testing. Power electronics experience helpful. Retirees welcome. Full Time electrical engineers who want to supplement main income also welcome. minimum 3-5 years experience Competitive Hourly rate. Ronkonkoma Office (near ISP airport). Need to start ASAP.

Job Description Join North Wind Systems – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineering Analyst will conduct analysis on designs of R&D prototype components and assemblies. Responsibilities: • Performs thermal and structural analysis of product components and assemblies using finite element or hand calculation methods., • Lead a small team of analysts, providing mentorship, reviewing output of team members, and driving analysis tasks to closure. Manages analysis related budgets and schedules and tracks team performance accordingly., • Reviews customer specifications and internal methods to plan analysis activities, determine loading conditions and develop appropriate acceptance criteria., • Supports customer interface meetings and design reviews by presenting analysis plans, status and results as required., • Bachelor’s degree in engineering discipline with 10+ years of related experience, or a combination of education and experience equivalent to above., • Candidate should have excellent communication skills and enjoy working in a fast-paced work environment., • Must be a self-starter, able to work on multiple projects, and prioritize workload., • General familiarity with aerospace research and development test products such as wind tunnel models, test engines and prototype devices; and analysis of these in the subsonic, transonic and hypersonic realms., • Working knowledge of computer-aided modeling codes (NX or SOLIDWORKS preferred), • Expert knowledge of Finite Element Analysis techniques and codes (ANSYS preferred), • Expert knowledge of steady state, transient, modal, buckliing, harmonic response, and random vibration analysis. Also familiar with the modeling of nonlinearities such as contact, material plasticity, large deflections, etc., • Expert ability for performing textbook hand calculations for axial/bending/torsional stress, beam deflection, and free body diagrams, and 1D fluid flow., • Familiarity with Computation Fluid Dynamics work such that you can supervise CFD team members while not necessarily performing the work., • Familiarity with ASME Section VIII pressure vessel design and calculations., • Working knowledge of Mechanics of Materials for the purposes of obtaining material strength and fatigue limits for a wide range of materials including metals, composites, castings, weldments and 3D printed parts., • Working knowledge of stress-based and strain-based fatigue. North Wind is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. North Wind supports safe and drug free workplace through pre-employment background checks and drug testing. The salary range provided is a general guideline. Actual pay will depend on several factors, including, but not limited to, education, experience, training, and other applicable qualifications. North Wind is committed to pay transparency in compliance with applicable state and local laws. All candidates must be eligible to work in the United States.

Job DescriptionSalary: $70-95K DOE Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uPs and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location New York (Long Island)

Job Description Position Title: Senior Test Engineer REV000 Department: Test Engineering Reports to: Director, Test Engineering Job Code: 3i1 FLSA: Salaried (Exempt) EEO Category: 2 - Professionals For more than 60 years, Power Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Test Engineer will be responsible for overseeing and leading all aspects of test engineering for high-reliability electronics products within the organization. This role combines advanced technical expertise, leadership, and problem-solving abilities to manage and execute complex testing tasks, develop test systems, and mentor a team of engineers. The individual will play a key role in ensuring product quality, improving test processes, and driving innovation in testing methods and equipment. Key Position Accountabilities: • Lead and manage the design, development, and implementation of test systems, test fixtures, and test software., • Provide technical leadership in the troubleshooting, analysis, and resolution of complex test-related issues., • Oversee the testing of prototype, production, and customer-returned products, ensuring all tests are performed to meet quality and performance standards., • Collaborate with cross-functional teams (Engineering, Design, Manufacturing) to develop and optimize testing processes that align with production requirements., • Mentor and provide guidance to junior test engineers, fostering an environment of continuous learning, collaboration, and high performance., • Lead failure analysis and root cause investigation for both in-house and customer-returned products, ensuring corrective actions are implemented and communicated to relevant teams., • Champion the continuous improvement of testing methodologies, test equipment, and process optimization., • Provide technical support in test equipment selection and integration, ensuring the team has the proper tools to execute testing procedures effectively., • Review and approve test documentation, including test plans, test reports, and procedures, ensuring compliance with company and customer requirements., • Ensure adherence to industry standards (e.g., MIL-PRF, IPC) in all test activities., • Support the execution of qualification and certification testing as needed to meet customer requirements., • Education: Education: Bachelor's degree in Electrical Engineering or a related field. Graduate degree is a plus., • Experience: 10+ years of experience in test engineering, with at least 3 years in a leadership or senior engineering role overseeing test activities in a manufacturing environment., • Technical Skills:, • Expertise in designing, developing, and optimizing test systems, test fixtures, and software., • Extensive knowledge of testing techniques, test equipment, failure analysis, and debugging., • Proficient in the use of statistical analysis techniques (SPC) and test data analysis., • Knowledge of electronics manufacturing, including Hybrid and PCB manufacturing., • Familiarity with MIL STDs 883, MIL-PRF 38534, 38510, IPC 610., • Leadership Skills: Proven ability to lead, mentor, and develop teams of engineers, ensuring a high level of performance and collaboration., • Strong problem-solving skills with the ability to diagnose complex issues and drive solutions., • Excellent written and verbal communication skills, with the ability to present technical information to various stakeholders., • Experience with test automation, scripting languages (e.g., Python, LabVIEW)., • Familiarity with modern test equipment and emerging testing technologies., • Ability to influence change and drive improvements in testing processes and practices. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description A confidential, industry-leading RF/microwave manufacturer is looking for an experienced RF Amplifier Design Engineer to design, develop, and test low noise and medium power amplifiers using both discrete transistor and MMIC technologies. You’ll work across hybrid and surface-mount designs, run linear and nonlinear simulations, support production, and contribute directly to new product development. This is a hands-on engineering role with real visibility inside the organization. What You’ll Do * Design, develop, and test discrete and MMIC-based low noise/medium-power amplifiers * Build new RF and microwave circuits, components, and products * Perform linear and nonlinear simulations for active and passive circuits * Define specs for microwave components and subassemblies * Support high-reliability testing and screening requirements * Generate design reviews, test reports, and documentation * Work with manufacturing teams to ensure efficient build processes * Estimate project schedules, track engineering labor, and support technical proposals What You Need * Bachelor’s in Electrical Engineering with 4+ years experience, or Master’s with 2+ * At least 2 years designing and simulating low noise amplifiers * Experience designing passive RF/microwave components (couplers, dividers, attenuators) * Experience designing for manufacturability and managing engineering projects * Proficient with linear CAE tools plus exposure to nonlinear CAE * Hands-on lab/test experience: VNAs, noise figure analyzers, spectrum analyzers, power meters, signal generators * Ability to work under a microscope in a cleanroom environment * Familiarity with semiconductor devices like GaAs and GaN * Strong communication skills * Must be able to obtain a Secret-level security clearance Preferred Experience * Familiarity with MIL-specs: MIL-PRF-38534, MIL-STD-202 * Experience aligning and tuning fine-pitch circuits under a microscope * Knowledge of oscillator, synthesizer, PIN-diode, and filter design * System-level cascade and spur analysis * Proficiency with Keysight ADS, RFPro, Ansys HFSS, and EM simulation tools * CAD familiarity: AutoCAD, Inventor * Design/test experience up to 26 GHz or higher (40 GHz preferred) * Hybrid chip-and-wire and PCB SMT manufacturing exposure * Wire bonding experience

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The pay range for this position is between $130,000 and $170,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: We are seeking an experienced Senior Verification Engineer to join our Engineering team. The successful candidate will play a key role in ensuring the functionality, performance, and reliability of FPGA-based designs through a comprehensive verification and validation processes. This position involves developing robust testbenches, creating advanced simulation environments, executing verification suites, and collaborating closely with Design Engineers to achieve first-pass success for FPGA implementations. Key Position Accountabilities: • Design and Development: Develop and implement verification plans, test strategies, and methodologies for complex FPGA-based systems., • Verification and Validation: Execute comprehensive verification processes, including simulation, testbench creation, requirement-based validation and verification per accepted safety standards, and regression testing to ensure design correctness and performance., • Collaboration: Partner with system architects, hardware engineers, and software developers to define requirements and deliver integrated solutions., • Troubleshooting: Diagnose, debug, and resolve FPGA-related issues, including hardware/software interaction challenges and performance optimizations., • Documentation: Prepare and maintain detailed documentation of verification processes, design methodologies, and test results to support traceability and knowledge sharing., • Mentorship: Provide technical guidance, mentorship, and best practices to junior engineers in FPGA design, verification, and validation techniques., • Planning: Develop project schedules, identify resource requirements, and support product development from concept through release., • Education: Bachelor’s or Master’s degree in Electrical or Computer Engineering (or related field)., • Experience: 8–15 years of hands-on experience in FPGA verification and development of complex digital systems, utilizing advanced verification techniques and methodologies., • HDL language & Verification Frameworks: Expertise in VHDL; working knowledge of Verilog, SystemVerilog and UVM for function verification., • FPGA Design Tools: Proficiency in Xilinx Vivado required; familiarity with Intel Quartus and Lattice Diamond is desirable., • Simulation & Debug tools: Experience using ModelSim/Questa and Xilinx Integrated Logic Analyzer (ILA)., • Technical Expertise: Solid understanding of FPGA architectures, digital design principles, and high-speed design techniques., • Protocols: Hands on experience with PCIe, 1G/10G Ethernet, and Time-Sensitive Networking (TSN)., • Problem-Solving: Strong analytical and debugging skills with meticulous attention to detail., • Communication: Excellent verbal and written communication skills, with the ability to collaborate effectively across multidisciplinary teams., • Experience with embedded systems and software development., • Familiarity with hardware/software co-design and system integration. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Job Title: Manufacturing Engineer Job Description We are seeking a dynamic Manufacturing Engineer to join our evolving department, which is creating hybrid engineers capable of handling both methods/operations and design. The role focuses on developing operation sheets and performing tooling design, primarily involving military parts with minimal R&D. The position requires meticulous attention to detailed specifications and manufacturing methods. Responsibilities • Review customer specifications for manufacturing requirements., • Create detailed assembly instructions and operation sheets for production., • Interface with the quality assurance team, request RFVs, and communicate with government entities for technical clarifications., • Collaborate with touch labor teams during first production runs to ensure smooth operations., • Strong understanding of manufacturing engineering and process improvement., • Proficiency in creating assembly instructions and operation sheets., • Experience with tooling design and ERP systems., • Familiarity with manufacturing methodizing for mechanical parts and continuous improvement practices., • A degree in engineering is preferred; however, candidates with 10–15 years of relevant experience without a degree may be considered., • Minimum of 5+ years of experience, with 3 years acceptable if particularly strong. This position requires 100% onsite presence from Monday to Friday, with a flexible start time between 6:30 AM and 8:30 AM at the manager's discretion. The company offers a collaborative culture, is privately owned, and has approximately 100 employees. It is located on Long Island, featuring a 30,000 sq. ft. corporate headquarters and main manufacturing and engineering facility, alongside a 57,000 sq. ft. division for large composite structures. Job Type & Location This is a Permanent position based out of Hauppauge, NY. Pay and Benefits The pay range for this position is $90000.00 - $110000.00/yr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Hauppauge,NY. Application Deadline This position is anticipated to close on Jan 17, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Key Responsibilities: • Design and engineer Medical Air & Vacuum systems in compliance with healthcare regulations and safety standards., • Provide technical support for the installation, maintenance, and troubleshooting of medical gas systems., • Collaborate with sales, project managers, and customers to assess system requirements and deliver customized solutions., • Develop system layouts, schematics, and technical specifications., • Ensure all designs adhere to industry codes, such as NFPA 99 and ASSE 6010, and are compliant with local, state, and federal guidelines., • Oversee and support the installation and commissioning of systems to guarantee they meet performance and safety standards., • Provide training and support to customers on system operation and maintenance., • Stay current with industry trends and advancements in medical gas technologies., • Qualifications:, • Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related technical field., • Strong knowledge of relevant codes and standards (NFPA 99, ASSE 6000, etc.)., • Hands-on experience with the design, installation, and maintenance of medical gas systems., • Strong problem-solving skills and the ability to troubleshoot technical issues efficiently., • Excellent communication skills with the ability to work collaboratively in a team environment.Company DescriptionWe are a leading manufacturer and assembler of Medical Air and Vacuum systems, providing essential equipment to healthcare facilities across the world. Our systems are critical for patient care, and we pride ourselves on our commitment to quality and customer satisfaction. We are looking for an experienced and detail-oriented people to join our team.We are a leading manufacturer and assembler of Medical Air and Vacuum systems, providing essential equipment to healthcare facilities across the world. Our systems are critical for patient care, and we pride ourselves on our commitment to quality and customer satisfaction. We are looking for an experienced and detail-oriented people to join our team.

Job DescriptionDescription: We are seeking a hands-on Automation & Controls Engineer to support, troubleshoot, and improve a wide range of manufacturing equipment in a regulated pharmaceutical environment. This role is ideal for mechanically inclined problem-solvers who enjoy being on the production floor, working directly with machines, controls, and electrical systems – not behind a desk. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 8:00AM – 4:00PM Pay Range: $90,000 - $140,000 per year, depending on experience Start Date: ASAP What makes this role exciting: • A true automation playground – work hands-on with a wide variety of manufacturing equipment, controls platforms, and technologies in a complex pharmaceutical environment., • Real impact, real machines – you’ll diagnose, fix, and improve equipment that directly supports production, quality, and reliability – not abstract or purely digital systems., • High visibility & ownership – your expertise will be relied on across maintenance, engineering, and operations, with meaningful input into equipment improvements and upgrades., • Constant learning & challenge – no two days look the same; you’ll be exposed to diverse machinery, evolving technology, and new technical challenges. At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities: In this role, you will: • Troubleshoot and resolve PLC, electrical, and control system issues across a wide range of manufacturing equipment to minimize downtime and improve reliability., • Design, implement, and optimize machine control systems, including PLCs, HMIs, servos, and electrical components., • Own automation documentation and standards, maintaining current PLC/HMI programs, electrical drawings, and equipment documentation., • Collaborate closely with maintenance, engineering, and operations teams to execute repairs, improvements, change control, and equipment qualification., • Bachelor’s Degree in Electrical Engineering, Automation Engineering, or a related engineering discipline., • Mechanically curious and systems-oriented thinker, • Comfortable working directly on equipment in a production environment, • Enjoys variety, challenge, and continuous learning, • Practical, hands-on problem solver – not purely theoretical, • Hands-on experience with PLC, HMI, and servo systems (Allen-Bradley, Siemens, Mitsubishi), • Experience troubleshooting electrical control panels, sensors, drives, and actuators, • AutoCAD or similar electrical drafting experience preferred, • Working knowledge of OSHA and NEC requirements

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Tuition assistance The RF Engineer applies principles of RF/Electrical Engineering to solve complex technical challenges in research, development, and manufacturing environments. The role focuses on the design, development, testing, and production of RF Power Amplifier devices and systems, providing solutions to both routine and complex engineering issues under general supervision. Key Responsibilities: • Evaluate and test RF circuits, systems, and modules to meet specifications; modify as needed to achieve performance goals, • Conduct Acceptance Test Procedures (ATPs) on complete RF Power Amplifier Systems, • Develop and prototype new RF power amplifier gain stages, ensuring compliance with high-performance specifications, • Collaborate with engineering and manufacturing teams to ensure accurate data transfer and process control during product transition to manufacturing, • Design and develop next-generation RF systems specifically tailored for defense and medical applications in the IMHZ-2GHZ range, • Provide technical support and coordination to facilitate product development, manufacturing, and the transition of new designs into production, • Assist in preparing technical bids and proposals; occasionally attend customer design reviews and field-testing activitiesQualifications: Education: • Bachelors degree in Electrical Engineering (BSEE), Mechanical Engineering, Applied Science, or equivalent experience without a degreeExperience:, • 35 years of experience in microwave/RF design and developmentTechnical Skills:, • Proficiency in RF/microwave design and PCB layout, • Hands-on experience with testing, tuning, and modifying RF circuits, • Familiarity with CAD and simulation tools (ADS, HFSS, AutoCAD, PADS is a plus), • Skilled in using RF test equipment such as network analyzers, spectrum analyzers, power meters, and oscilloscopesSpecialized Knowledge:, • Experience in high-power solid-state amplifier design, • Familiarity with both packaged surface mount components and bare die technologies, • Experience with circuits operating up to 2GHZPreferred Qualifications:, • Proven experience in designing high-power solid-state RF amplifiers, • Knowledge of advanced simulation tools and RF design techniques, • Willingness and ability to travel occasionally for customer support and field service

Job Description$104,400 - $150,000/year + bonus 1st Shift Permanent (Full Time) SUMMARY: A Senior Electrical Design Engineer who analyzes, designs, prototypes, tests, and supports complex analog and digital components, subsystems, and systems. You will develop new product capabilities and improve core products by applying engineering principles, producing robust, requirements-based designs, and supporting products through the full development lifecycle. Typical projects are diverse and technically challenging and will grow your domain expertise and organizational knowledge. Works within engineering and cross-functional teams within and/or across the business unit or division. May have regular customer/supplier interaction. PRIMARY FUNCTIONS: • Develops complex conceptual and detailed Analog and Digital designs by analyzing product performance and customer requirements., • Performs diverse and complex product development, modification, and evaluation of components, subsystems, and systems by applying engineering principles and developing new or unique analysis tools as required., • Experience with microprocessor/microcontroller-based designs which include RAM, FLASH, ADCs, DACs, Supervisory ICs, Op-Amps/Signal Processing, Comparators, Serial Interfaces such as I2C, SPI, CAN, ARINC-429, Discrete Input/Output interfaces, etc., • Experience with requirement-based designs and using tools such as DOORS a plus., • Experience utilizing industry standard schematic entry tools such Dx Designer., • Capable of debug and support of new designs, production builds and field related issues., • Familiar with root cause and corrective action investigation tools., • Support product throughout the life cycle of development, including developing test procedures that ensure proper implementation of requirements., • Prepare for and conducts design reviews and various milestones throughout the product life cycle., • Develops complex conceptual and detailed design specifications by analyzing product performance and customer requirements. Investigates design factors such as function, performance, interchangeability, non-recurring and recurring cost, operational efficiency, and contractual requirements. Performs diverse and complex product development, modification, and evaluation of components, subsystems, and systems by applying engineering principles and developing new or unique analysis tools as required., • Applies scientific analysis and mathematical models to predict and measure the outcome and consequence of design alternatives. Interprets and validates test results for accuracy and precision. Oversees and monitors product acceptance procedures and parameters to achieve customer and product reliability and safety standards (e.g. failure analysis). Utilizes and interprets predictive models to simulate and verify design concepts., • Completes technical project elements (e.g. preparation of product or system layout; defining system architecture; etc.) as assigned. Develops critical data and analysis necessary to present technical product and/or system proposals to customers., • Contributes to the completion milestones associated with specific projects (e.g. create functional diagrams and system layouts; review detailed drawings and schematics; research customer data item requirements). Maintain efforts within defined cost and schedule constraints, including statusing and root cause/corrective actions of associated variances., • Reviews product specifications and/or modifications to ensure clarity, completeness, form, fit, function, and conformity to standards and procedures. Troubleshoots design errors, omissions, and other deficiencies, and recommends revisions, engineering change orders, and improvements to engineering management or the project team., • Provides technical information for review with product engineering teams applying consistent engineering practices, standards, and documentation methods (e.g. structured design process; customer design reviews). Writes supporting documentation for procedures and technical reports., • Conducts complex analysis and devises tests to validate performance in the development of new products, methods, materials or processes. Completes required documentation, generates detailed reports, creates customer proposals and presentations and/or change proposals. Determines required actions, performs or directs completion of tasks, and publishes findings and/or results., • Compiles and analyzes operation, test, and research data, develop acceptance, engineering evaluation, development and qualification/certification test plans, procedures, and reports., • May communicate with customers to identify new business opportunities, present Parker product capabilities, and clarify customers’ technical requirements. May write technical proposals for customers by reviewing and interpreting specifications and requirements., • Mentors or serves as a resource to share specialized knowledge with others. Establishes goals and objectives and tracks performance required to complete projects., • Bachelor’s degree (BS) (or Professional Engineer (PE) certificate) in Electrical Engineering. Master’s degree (MS) preferred., • Demonstrated ability to perform the essential functions of the job typically acquired through 7-9 years of related experience., • Has thorough in-depth knowledge of engineering domain principles, concepts, product standards, and techniques, industry practices, regulations, and policies. Ability to apply broad knowledge of other related engineering areas to area of expertise., • Demonstrated ability to investigate and implement new technologies., • Proficient with engineering design and analysis tools (e.g. DX Designer, PSpice/LTspice); ability to use standard software packages. May require capability using specialized software applications or languages., • Ability to establish individual objectives to complete projects and provide status to the team at project milestones. Ability to effectively influence the overall team and functional objectives., • Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Ability to respond to significant inquiries from customers, regulatory agencies, or marketing/sales teams.

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineer – Digital Integrated Systems is a key technical leadership position that reports to the Office of the Chief Engineer and drives the technical execution of the company’s digital engineering (DE) vision for current and future projects. Experienced in architecting, designing, and integrating digital engineering hardware and software platforms for multi-domain, complex systems. A practitioner of digital engineering tools and model-based approaches who will help guide the company’s digital transformation. Skilled communicator who can operate as an individual contributor and a leader while distilling the value proposition of digital engineering and building company-wide interest in adoption of new digitally integrated approaches and processes. Responsibilities: Digital Engineering Platform Development: Leads the architecture development, design, build, integration, and deployment of a digital engineering hardware and software platform for a new wind tunnel facility complex. Develops digital engineering technology solutions that evolve with the project, are scalable to new applications, and are aligned with government architectures and frameworks. Engages the team to develop the critical DE data flows and workflows that streamline test conduct and improve test utility for aerospace system developers. Leads the development and implementation of DE platform tools, including digital twins, use of machine learning (ML) and artificial intelligence (AI) for improved design processes and test techniques, and integration of modeling and simulation (M&S) workflows for multi-domain design, analysis, and optimization. Digital Transformation: Guides the company’s digital modernization, including helping engineering leadership select and integrate new DE software tools and processes. Engages engineering workforce to support selection and adoption of new DE-related tools and workflows. Creates and leads training sessions with engineering staff to support DE upskilling. Team Management & Collaboration: Creates and leads highly functioning teams to develop digital engineering solutions and products. Effectively communicates the value proposition of digital engineering to grow team-wide understanding and interest. Fosters a collaborative and inclusive work environment that encourages innovation, accountability, and professional growth. Technical Expertise: Experience in architecting, designing and integrating a digital engineering hardware and software platform for a multi-domain, physical system / product. Practitioner of product lifecycle management tools, model-based systems engineering, and creating digital threads between software tools to integrate complex workflows and system development. Cross-functional Support: Partners with Division and Functional leadership to ensure alignment and seamless integration of digital initiatives. Performance Monitoring & Optimization: Tracks and analyzes digital performance metrics, providing insights and recommendations for improvement. Preferred Education / Experience: • Advanced degree in Mechanical Engineering, Aerospace Engineering, or a related discipline, • Minimum 10 years of experience in engineering projects pertinent to the responsibilities listed above, • Strong knowledge of digital engineering tools and technologies, including model-based systems engineering (MBSE), product lifecycle management (PLM) tools, digital twins, digital threads, and cloud-based platforms, • Demonstrated success driving the technical execution of digital engineering platforms and initiatives, • Deep understanding of engineering principles, including mechanical, electromechanical, and aeronautical systems design, test, and evaluation, • Proficiency in interpreting engineering plans, technical drawings, and specifications, • Ability to define complex problems, analyze data, interpret abstract concepts, and develop effective solutions, • Skilled in project management, prioritization, budgeting, and delivering results on time, • Familiarity with Department of Defense (DoD) acquisition processes, R&D funding, and technology development programs, • Excellent written and verbal communication skills, with the ability to tailor messaging to technical and non-technical audiences, • Proficient in Microsoft Office and engineering-related software tools., • Experience with aerospace test systems and / or vehicle development programs, • Background in early-stage research and development, product development methodologies, and innovation strategy

Job DescriptionSenior Magento AWS Cloud Engineer (Marketplace Specialist) Company: FuntoNetwork Location: Remote (Global) Job Type: Full-time Experience Level: Senior (5+ years) Department: Cloud & E-commerce Solutions Reports To: Lead Cloud Architect Job Description FuntoNetwork is seeking a highly skilled Senior Magento AWS Cloud Engineer with expertise in Terraform to design, build, and manage secure, scalable, and high-performance marketplace platforms for our clients. In this role, you will architect end-to-end solutions using Magento Commerce on AWS, automated through Infrastructure as Code (IaC) with Terraform. You will work directly with enterprise clients to migrate, optimize, and secure their Magento-based marketplaces in the cloud, ensuring compliance, resilience, and cost-efficiency. Key Responsibilities • Architect, deploy, and manage Magento 2 Commerce on AWS using Terraform for infrastructure automation., • Design and implement highly available, multi-region AWS architectures for Magento (EC2, RDS/Aurora, ElastiCache, Elasticsearch/OpenSearch)., • Build and maintain Terraform modules for Magento infrastructure, including VPC, security groups, ALB, Auto Scaling, and CloudFront distributions., • Implement CI/CD pipelines for Magento using AWS CodePipeline, GitHub Actions, or Jenkins integrated with Terraform., • Ensure security and compliance (PCI-DSS, GDPR) through AWS WAF, Shield, KMS, IAM policies, and Magento security patches., • Optimize Magento performance on AWS using caching (Redis/Varnish), CDN (CloudFront), and database tuning., • Monitor system health with AWS CloudWatch, New Relic, or Datadog; set up alerts and automate responses., • Collaborate with development teams to implement microservices and serverless extensions (Lambda, API Gateway) for marketplace features., • Provide client-facing consulting on cloud migration, cost optimization, and best practices for Magento on AWS.Required Technical Stack & Skills 1. Magento: • Magento 2 Commerce (Cloud/On-Prem), • Custom module development, theme integration, and API extensions, • Performance optimization, caching strategies, and security hardening 2. AWS: • Core: EC2, RDS/Aurora, ElastiCache (Redis), S3, CloudFront, VPC, • Security: IAM, KMS, WAF, Shield, Secrets Manager, Config, • DevOps: CodePipeline, CodeBuild, CloudWatch, Systems Manager 3. Infrastructure as Code (IaC): • Terraform (mandatory) for provisioning and managing AWS resources, • Experience with Terraform modules, state management, and workspaces 4. Supporting Technologies: • Linux administration (Ubuntu, Amazon Linux), • PHP, Composer, NGINX/Apache, • MySQL/Aurora, Redis, Elasticsearch, • Docker, ECS/EKS (optional but preferred), • Git, GitHub/GitLab, CI/CD toolsQualifications, • 5+ years in Magento development and administration., • 3+ years of hands-on AWS cloud engineering., • 2+ years of Terraform experience in production environments., • Proven experience deploying and managing Magento on AWS at scale., • Strong understanding of PCI-DSS compliance for e-commerce platforms., • Excellent troubleshooting and performance tuning skills., • Ability to work in a client-facing, consulting role with strong communication skills.Preferred Certifications, • AWS Certified Solutions Architect – Associate/Professional, • Magento Certified Professional, • HashiCorp Terraform AssociateWhat We Offer, • Competitive salary + performance bonuses., • Fully remote, flexible work environment., • Opportunity to work on enterprise-level e-commerce projects., • Continuous learning budget (certifications, conferences)., • Collaborative, tech-driven culture with growth opportunities.

Job Description FLSA Status: Salary/Exempt Reports To: General Manager Direct Reports: None Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision-making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Minimum Qualifications Education and Experience • Bachelor of Science in engineering or related field, • 3-10 years of design engineering or relevant experience, • 2-5 years of electrical connector design experience Knowledge • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Other responsibilities, initiatives and ad-hoc projects as required. Compensation range: $90,000 - $125,000

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office with occasional travel to manufacturing location in Mexico The pay range for this position is between $120,000 and $150,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Design Engineer is responsible for developing new magnetics related components based on customer or marketing inputs. They shall have working knowledge of transformer design, property of materials, electrical testing, and design for manufacturability. Performance will be measured on creating designs that meet or exceed customer requirements, timely transition of new designs from concept to production readiness, collaboration with production in suggesting and implementing productivity projects. Key Position Accountabilities: · Design and Development: Plan, conceptualize, and develop new magnetics components using new and innovative technology. Design analog circuits related to high frequency data bus and video signal transmission. Provide material and labor estimates to Sales for customer requests for pricing. • Equipment and Materials Research: Actively seek out opportunities improve existing processes by keeping up with new equipment and material releases. Seek out ways to integrate new equipment and materials to improve productivity., • Collaboration: Work closely with engineers, managers, and other design professionals in the development of prototypes, sustaining efforts, and integration of systems into manufacturing processes. Support the transition of designs from concept to prototype and to full-scale production., • Mentoring and Design Review: Coach junior engineers in solving design issues. Responsible for project management of Design Reviews., • Testing and Validation: Create, review, and verify test setups. Support the execution of testing procedures required for product acceptance and qualification. Collaborate with internal and external facilities to validate design performance against defined specifications., • Engineering Analysis: Perform calculations to support CapEx return on investment decisions., • Material Selection and Development: Choosing the right material for a specific application, considering factors like strength, durability, cost and environmental impact., • Documentation and Compliance: Create, review, and maintain technical drawings, specifications, and product documentation using a mix of CAD (SolidWorks preferred), MS Word, and digital images. Ensure designs and processes meet industry and regulatory standards, including internal engineering standards and product definition procedures., • Continuous Improvement: Apply problem-solving skills to identify areas of improvement in existing designs or manufacturing processes, making recommendations and providing solutions to enhance efficiency, quality, and cost-effectiveness., • Mathematical and Analytical Skills: Strong ability to apply engineering fundamentals, and statistical methods to create innovative, reliable, cost effective design solutions that translate into more design wins., • Design Skills: Strong knowledge of electromagnetic theory, magnetic circuit design, and magnetic material properties., • Analog Circuit Design: Working understanding of analog and digital electronics, signal integrity, power and thermal management is a plus. Simulation experience with LTspice or similar is a plus., • Problem Solving and Innovation: Excellent troubleshooting and critical thinking skills with the ability to propose innovative and creative solutions to complex design challenges., • Communication Skills: Strong verbal and written communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders for internal and external customers. Excellent interpersonal skills to work collaboratively across teams. Bilingual in English and Spanish is beneficial., • Adaptability: Ability to work on several projects at once and shift priorities as needed to meet company goals, • Attention to detail: High attention to detail with the ability to conduct rigorous reviews of designs, calculations, and test procedures to ensure compliance with specifications and quality standards., • Bachelor of Science degree in Engineering discipline required., • Bachelor’s or Master’s Degree in Electrical Engineering preferred, • 7+ years of related experience., • Working Knowledge of Military Specifications., • Experience in Military/Aerospace industry a plus. Work Environment: • This position operates in a mix of office, manufacturing, and lab-based environment., • Some travel may be required for process review at other manufacturing plants or supplier locations. Physical Demands: • Must be able to remain stationary during design and analysis sessions., • Having good manual dexterity and basic soldering / assembly skills to assist in building test and assembly fixtures is a plus., • Ability to lift and move up to 25 pounds of testing or prototyping equipment., • Frequent communication with cross-functional teams; ability to convey complex technical details clearly and effectively. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job DescriptionDescription: We are seeking a Serialization Engineer to join our Operations team, where you’ll play a key role in supporting serialized packaging operations and technical packaging solutions across pharmaceutical products. In this hands-on, cross-functional role, you’ll work closely with Packaging, Quality, Engineering, and project teams to ensure efficient, compliant, and accurate packaging operations from inception through commercial launch. This is an excellent opportunity for someone who enjoys solving technical challenges, learning new serialization technologies, and contributing directly to high-quality pharmaceutical packaging processes. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 9:00AM – 5:00PM Pay Range: $75,000 - $100,000 per year, depending on experience Start Date: ASAP What makes this role exciting: • Hands-on with cutting-edge serialization technology – work directly with Optel Linemaster, Pharmaproof, and other packaging automation systems., • Learn and grow in a fast-paced pharmaceutical environment – gain exposure to packaging design, commissioning, validation, and regulatory compliance., • Cross-functional experience – collaborate with Engineering, Quality, Project Management, and technical teams to see projects from concept to commercial launch. At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities In this role, you will: • Support serialized packaging projects from start to launch by assisting in equipment commissioning, validation, and process optimization for new and existing packaging configurations., • Conduct line trials, studies, and assessments to determine critical process parameters (CPP) and ensure consistent, compliant packaging operations., • Administer serialization operations including serial number management, master recipe creation, EPCIS updates, and shipment event notifications., • Collaborate cross-functionally with Packaging, Engineering, Quality, Project Management, and Business Development teams to solve technical challenges and implement process improvements., • Bachelor’s degree in Packaging Engineering, Mechanical Engineering, Manufacturing Engineering, or a related technical discipline required, • Minimum 3 years of relevant experience in engineering, packaging or serialization roles, preferably in a pharmaceutical environment, • Hands-on experience with packaging equipment, line trials, and process validation strongly preferred, • Knowledge of Pharmaceutical Serialization and Aggregation systems and DSCSA guidelines, • Familiarity with FDA, cGMP, and 21 CFR Part 210, 211, and Part 11, • Strong technical writing and documentation skills, • Hands-on knowledge of packaging equipment setup, operation, and maintenance, • Ability to read and develop engineering drawings, P&IDs, and technical documentation, • Strong problem-solving skills and ability to work in cross-functional teams

Job Description Narda MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: The RF/microwave Amplifier Design Engineer is an experienced professional with the capability to design discrete transistor and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies. Able to synthesize and develop new amplifier components using CAE analysis tools and has hands-on bench troubleshooting and test skills. The individual effectively communicates with contacts inside and outside of own department, customers, and suppliers. Recommends enhancements to systems and processes. Possesses practical project management skills and will work under general supervision to achieve technical performance while meeting schedule and cost operational targets for specific programs and projects with moderate impact on departmental results. Essential Functions: • Design, develop, test and support production of discrete and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies., • Conceptualize and develop new RF and microwave circuits, packages, and products., • Perform linear and nonlinear circuit simulations of microwave active and passive circuits., • Provide direction on hi-reliability specifications, i.e., the screening and testing for our products to be compliant., • Develop specifications for microwave components and subassemblies., • Generate design review presentations and test reports., • Design for ease of manufacturing., • Estimate and track project schedules and labor for engineering developments., • Bachelor’s Degree in Electrical Engineering and a minimum of 4 years prior relevant experience or a Graduate Degree and a minimum of 2 years prior related experience., • A minimum of 2 years designing and simulating low noise amplifiers., • Experience designing RF/Microwave passive components, e.g., couplers, power dividers and attenuators., • Ability to manage projects and interface to other areas., • Experience designing products for manufacturing., • Proficient in linear CAE and experience with non-linear CAE., • Ability to work under a microscope in a clean room environment to test and tune circuits., • Experienced user of microwave test equipment; including network analyzers, noise figure analyzers, spectrum analyzers, power meters and signal generators., • Familiarity with device semiconductors, such as GaAs and GaN., • Ability to gain Secret Level Security Clearance., • Familiarity with MIL specifications, such as MIL-PRF-38534 and MIL-STD-202., • Hands-on experience testing and aligning fine pitch circuits under a microscope., • Design experience with oscillators, synthesizers, and PIN diode circuits., • Knowledge/application of filter synthesis and design., • System analysis experience comprising both cascade and spur analysis., • Proficient use of Keysight ADS, Keysight RFPro, and/or Ansys HFSS simulation tools., • Perform EM simulations of microwave housings, boards, transitions, and passive circuits., • Use of CAD tools such as AutoDesk Inventor and AutoCAD., • Design/test experience of circuits operating through 26GHz is favored, with operation up through 40GHz further preferred., • Experience with both chip and wire hybrid and PCB surface mount manufacturing methods., • 401k, • Health/Dental/Vision insurance, • Life Insurance, • Paid time off, • Tuition Reimbursement Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Associate Test Engineer Location: Long Island NY | Suffolk County Why This Role? If you’re eager to put your Electrical Engineering knowledge to work in high-reliability industries like aerospace, defense, and medical, this role gives you the chance to: • Gain hands-on engineering experience right out of school or military training., • Learn from senior engineers while building, testing, and troubleshooting real hardware., • Be part of a company with a 50+ year track record of innovation and stability., • Contribute to technologies that protect lives and power mission-critical systems. What You’ll Do You won’t just sit behind a screen—you’ll be solving problems, creating tools, and making an impact every day. Here’s a look at the variety you’ll get: • Design & Build: Set up test fixtures, create test jigs, and develop test boxes for new product launches., • Collaborate: Work side-by-side with design engineers and production teams to resolve test challenges., • Code & Automate: Develop C# test routines, support ATE integration, and sharpen your software skills., • Hands-On Problem Solving: Troubleshoot, repair, and support test station hardware and software., • Learn by Doing: Work with PCBs—layouts, assemblies, and testing documentation., • Continuous Impact: Support initial production runs and ensure our products meet the highest standards. What’s In It For You • Career Growth: Direct exposure to product development and engineering management., • Skill Development: Expand your capabilities in C#, analog/digital design, embedded software, and test automation., • Mentorship: Work closely with experienced engineers in a supportive environment., • Meaningful Work: Every project contributes to aerospace, defense, and medical applications. What You Bring • A BSEE in Electrical Engineering or equivalent military technical training., • 0–2 years of engineering experience., • Interest in power electronics, circuit design, and testing., • Familiarity with C# coding, embedded software, and debugging tools (bonus if you’ve dabbled before)., • Curiosity, problem-solving mindset, and eagerness to learn.

Principal Quality Engineer BUSINESS: CIRCOR Aerospace, Inc LOCATION: Hauppauge, NY DIRECT REPORTING: Quality Manager About CIRCOR Aerospace & Defense CIRCOR Aerospace & Defense is focused on the design, development, and manufacture of specialty fluid and motion control products for demanding aerospace and defense applications. CIRCOR products are flying on most commercial and military aircraft, including single and twin aisle air transport, business and regional jets, military transports and fighters, and commercial and military rotorcraft. Other markets include unmanned aircraft, shipboard applications, and military ground vehicles. Business units are in Hauppauge, New York; Corona, California; Warren, Massachusetts; Paris, France; Uxbridge, UK; and Tangier, Morocco. Parent company CIRCOR International is headquartered in Burlington, Massachusetts and CIRCOR Aerospace & Defense is headquartered in Corona, California. Principal Activities · Acting as first line QA contact for customer calls regarding product problems; then liaising internally with appropriate persons to give the customer a prompt response. · Raising and closing In Service Defect Reports (ISDRs). · Where appropriate raising of Corrective Action Requests (CARs) and leading root cause corrective action (RCCA). · Participate in product improvement programs to correct in-field defects and manufacturing abnormalities. · Working with production and other departments to resolve queries. · Carry out detailed "root-cause analysis" and formulate corrective actions. Manage the process of driving changes and improvements as a result of this. · Liaising with purchasing and with suppliers to resolve any supplier certification issues. · Direct contact with customers and suppliers on QA related matters. · Provide technical guidance on quality standards, specifications, and processes. · Drive improvements in key defect drivers, processes, and systems to enhance assembly performance and meet site quality objectives. CANDIDATE REQUIREMENTS Knowledge Skills & Abilities · A strong interest in Quality Assurance in the widest sense is prerequisite with an aptitude for problem solving and continuous improvement. · The job holder should have an outgoing personality and be comfortable dealing with customers and internal personnel at all levels. · Excellent problem-solving skills aimed at identifying and correcting the root causes of problems. · Demonstrated working knowledge of problem-solving tools: 5-Whys, failure mode and effects analysis, 8-D, Pareto analysis, fault tree analysis, Bayesian inference and Ishikawa diagrams. · Thorough knowledge of Word, Excel, Power Point, Visio, Project, and other applicable tools. · Knowledge of Mil Spec Standards. Education & Experience · Bachelor’s degree in Mechanical, or Manufacturing Engineering, or a technical field required with relevant work experience. · Experience with AS9100 and/or ISO9001 quality management systems. · Experience in Lean Six Sigma or continuous improvement practices. · Experience with leading root cause corrective action (RCCA) and applying quality methodologies and tools. PAY RANGE: $100K-110K. Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience CIRCOR is an EEO Employer of Females/Minorities/Veterans/Individuals with Disabilities Our Benefits: • Comprehensive healthcare plans, • PTO and family leave, • 401(K), • Work Life Balance, • Career Development, • Other Benefits & Perks Why CIRCOR: • Work in a collaborative and innovative environment with a focus on professional growth., • Contribute to a diverse and inclusive workforce that values individuality and creativity., • Competitive compensation package and comprehensive benefits.

Position- ATE Engineer Location- Hauppauge, NY 11788 Rate- $65/hr Job descriptions: · 10+ years overall experience in test system software & test hardware development · Strong knowledge in handling NI PXI, PCI Hardware ( DAQ Cards, Chassis). Integrate 3rd party hardware. · Experience in development/ Upgrading automated test equipment , avionics, aerospace programs is a plus. · High level of expertise in developing automated testing equipment for production testing of mixed-signal products and sub-assemblies for MIL/Aerospace applications including analog circuits, embedded microprocessors and FPGAs, and supporting circuitry and power supplies. · Experience or knowledge of RS422/RS232, ARINC, AFDX interface knowledge, TCP/IP & Ethernet, UDP and such communication standards, protocols and/or interfaces is desirable · Experience in managing Software code repositories and Continuous Integration/Deployment is highly desirable · Strong verbal and written communication skills. · Common I/O protocols (I2C, SPI, JTAG, RS-232, RS-422, RS-485, Arinc 429, MIL-STD-1553, etc). · Solid foundation of LabView expertise · High level of experience with hands-on troubleshooting and turn-on of new test systems, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc. · Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents · Skilled in the use of common test bench equipment such as multimeters, DAQs, oscilloscopes, power supplies, RF and optical spectrum analyzers · Hands-on and extremely strong in system bring-up, troubleshooting, calibration, etc. · High level of expertise in NI LabVIEW , Test Stand & Phyton · Experience in reading schematics · Experience in test equipment failure analysis and troubleshooting skills in a production environment. · Experience with prototyping solutions and bench testing methodology · Experience in testing to MIL-STD-810, MIL-STD-461, MIL-STD-1275, RTCA/DO-160 and IPC-610 requirements. · Able to handle ITAR data

What you will do The Sprinkler Designer will be engaged in the preparation of detailed Computer Aided Design (CAD) drawings to assure the efficient and effective placement of our products and systems. How you will do it * Read and interpret construction documents, including drawings, specifications, and contracts. * Interpret and apply applicable NFPA standards to the design and/or layout of the sprinkler systems based on the building type, construction type, hazard classification and architectural features. * Design and layout sprinkler systems using specialized CAD software packages that are based on the AutoCAD platform; coordinate sprinkler system piping with other building components and perform hydraulic calculations. * Perform field check of completed design to verify accuracy. * Work closely with the district contracting teams to understand the contract with the customer, the scheduling of the design process, and the delivery needs of the installation crew; coordinate deliveries of system materials to the job site to meet the optimum installation start date. * Mentor others in the proper execution of sprinkler design using acquired experience, proficiency and knowledge. * Ability to assist sales in design estimations. What we look for Required * High School diploma or equivalent * At least 1-5 years of fire sprinkler design experience * Working experience of AutoCAD, HydraCAD, Sprinkler Design Software or equivalent sprinkler design software Preferred * Ability to solve basic math problems including geometry and algebra * Proficient in AutoCAD, MSOffice, Sprinkler Design Software and a hydraulic calculation program * Interpret and apply applicable NFPA standards for Automatic Sprinkler System Layout * NICET Level II (or higher) certification in Water-Based Systems Layout HIRING HOURLY RANGE: $39-$52 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at #techhiring

Senior Estimator (Civil Engineering / Sitework - Long Island). While the company is prioritizing senior-level talent, we are also open to engaging with.

Job Description Job Title: Architectural Millwork Engineer Location: Long Island, NY Industry: Architectural Woodwork / Millwork (not residential cabinetry or fixtures) Description: We are seeking an experienced Millwork Engineer to join our team in a fast-paced, fully automated architectural millwork environment. The ideal candidate is a highly skilled professional with extensive experience in Microvellum and a deep understanding of custom architectural woodworking fabrication. Precision, efficiency, and familiarity with automated manufacturing processes are essential. Responsibilities: * Develop and prepare detailed engineering and shop drawings using Microvellum (AutoCAD-based). * Interface directly with CNC fabrication equipment; ensure drawings are optimized for production through Microvellum workflows. * Translate architectural and design intent into accurate, buildable millwork components. * Collaborate closely with project managers, production teams, and installers to maintain accuracy and production efficiency. * Work within a fully automated shop environment supporting high-end, custom architectural projects. * Maintain strict quality standards—errors in programming or design have significant production impact. Requirements: * Minimum 10 years of experience in architectural millwork engineering or related fields. * Expert-level proficiency in Microvellum—must already be fluent; this position is not for candidates transitioning from AutoCAD. * Strong understanding of custom woodwork fabrication and construction methods. * Ability to manage multiple projects and priorities in a fast-paced production environment. * Preference for candidates local to Long Island, NY – relocation is not available. * Exceptional attention to detail, problem-solving ability, and technical accuracy. Benefits: * Comprehensive medical, dental, and vision coverage * 401(k) with 20% employer match * Paid vacation, sick, and personal days * Merit-based bonuses * Transportation reimbursement for NYC-based projects Contact:Phone: 605.210.5066Email: Equal Opportunity Employer: We are an Equal Opportunity Employer and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Are you ready to join an award-winning MSP recognized as one of the Best Places to Work? Techworks Consulting is seeking a talented and driven MSP Senior Engineer to support unique, complex customer environments while collaborating closely with a tight-knit, supportive team. If you're passionate about IT and thrive in a dynamic, hands-on setting, this on-site role in Ronkonkoma, NY could be the perfect opportunity for you! We'll Provide: * Robust benefits package including health insurance, dental, 401K, PTO and holidays * Salary range of $85,000-$120,000 * Opportunities for continued growth and learning * Great company culture supported by strong core values What You'll Do: * Serve as a field resource for onsite projects, troubleshooting, and deploying new equipment * Consult with clients on hardware/software rollouts and provide training on deployed systems * Manage and support Windows Server, Virtualization, Cloud Platforms, Active Directory, and Group Policy * Plan and execute projects with effective time management and organizational skills * Perform local and cloud server migrations, including Microsoft Office 365 migrations * Assist Security Engineers with compliance, risk assessments, and business continuity planning * Troubleshoot networks (routers, firewalls, switches, cabling) and conduct wireless network assessments, design, and heat mapping * Collaborate with the Technical Account Management team on Sales Engineering requests Skills You'll Need: * Minimum 3 years of experience in Managed Services and/or IT Consulting * Certifications from Microsoft, CompTIA, or Cisco or the ability to obtain in 90 days * Proficiency with RMM tools, backup solutions, and ticketing systems * Strong Windows Server/Workstation installation, configuration, and troubleshooting skills, along with UTM/router/switching/wireless experience * Excellent customer service skills * Strong communication, troubleshooting, problem-solving, and organizational skills, including accurate time entry and documentation Next Steps: * Quick apply with your resume here OR * Get a head start on our application and aptitude testing process here:

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description Tempest Engineer Full-Time If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has an opportunity for an experienced Tempest Engineer. You will perform and oversee Tempest test and design programs for external clients. Expertise in the areas of Tempest design, test, interpretation of requirements, evaluation of results, and recommendations to meet all Tempest requirements is required for this position. You will be responsible for providing Tempest expertise to clients and their programs and work independently to satisfy client requirements. Responsibilities include but are not limited to: • Prepare test plans, controlling plans, and prepare test reports, • Perform and oversee and/or direct Tempest tests at DTB and at client facilities., • Perform Tempest equipment and facility certifications, • Provide engineering expertise to clients for design. Additional responsibilities will include: • Support of DTB sales team in finding, developing, bidding and proposals, for new clients and programs., • Prepare and present technical presentations to clients, • Establish and maintain a continuing relationship with clients The ideal Candidate will need: • 4 yr. BSEE degree, • Certified Tempest Professional, Level II, • 5+ yrs. in Tempest test experience, • Experience with Tempest specifications, • Hands-on experience with Tempest test instrumentation, NSTISSAM, NACSEM 5112, AMSG a PLUS, • MUST have a strong understanding of the EMI/EMC Tiles software program, • MUST be able to write the necessary programs to support the department's workload, • Must have knowledge to Quote EMI/EMC test programs, full knowledge of MIL-STD-461 and DO-160, • Strong written and verbal communications skills, • US Citizenship and current US government security clearance is required, • Occasional travel required Dayton T. Brown, Inc. offers: • Competitive salaries, • Tuition Reimbursement at up to 100%, • Medical/Dental/Vision/FSA, • 401k with company match, • Profit Sharing, • Employee activities, • A family-friendly work culture, • Cash incentives and recognition awards Dayton T. Brown, Inc. is an equal opportunity employer- Veterans and Disabled. Job Posted by ApplicantPro

Job Description We’re hiring a Fire Sprinkler Designer / Engineer to prepare compliant, buildable fire protection system designs for commercial and industrial projects. This role supports estimating, planning, and successful field execution. What You’ll Do • Produce fire sprinkler system designs and CAD layouts, • Complete hydraulic calculations and technical submittals, • Review plans for NFPA and local code compliance, • Coordinate with project managers, engineers, and field teams, • Experience designing fire sprinkler systems, • Strong knowledge of NFPA standards and local codes, • Proficiency with CAD and hydraulic calculation tools, • Paid time off (PTO) and company holidays, • Opportunities for professional growth and certification support, • Stable pipeline of commercial and industrial projects, • Supportive, team-oriented work environment

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description LHH Recruitment Solutions has an opening for an Account and Sales Manager for our client in the Bohemia, NY area. This direct hire role allows you to expand your account management career within a state-of-the-art technology organization. This on-site position requires a minimum of five-years current experience, a bachelor’s degree in electrical or electro-mechanical engineering as well as experience in conducting technical presentations, trade shows and experience in a OEM environment. Successful candidates will have several years within the aerospace/aeronautics/defense/security fields. Salary range: $75,000.00 - $100,000 plus commission structure RESPONSIBILITIES: • Identify and pursue new business opportunities by conducting market research., • Analyzing market surveys and attend related tradeshows, exhibitions, and conferences., • Generate sales leads, set client appointment, prepare, deliver, and explain quotes, traveling to customer negotiations and closing orders, and assisting with product shipment as needed., • Maintain relationship with OEM customers by making visits and phone calls., • Schedule and conduct technical presentations for current and new customers., • Develop and execute sales plans to achieve objectives – KPIs, revenue, profitability, and market share., • Achieve annual booking plan on a quarterly basis., • Observe and maintain a real time sales forecast, sales database and reporting results., • Collaborate with cross-disciplinary engineering team and operations department., • Able and willing to travel to customer sites or other company locations worldwide (approximately 20%) REQUIREMENTS: • REQUIRED - Bachelor’s Degree in electrical or electro-mechanical discipline., • Experience in a OEM environment., • Willingness to learn and be hands on in a technical environment., • Proven well established verbal and written communication skills., • Highly proficient in Microsoft Office Suite of Tools., • Strong analytical, problem-solving skills and time management., • Ability to operate independently with minimal guidance by management., • Demonstrated proven history of successful sales management and quota achievement., • Willingness and ability to travel domestically and internationally., • Ability to read schematics highly preferred., • Superior proven technical presentation skills. Health insurance, dental insurance and life insurance are offered with this full-time direct hire role. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Pay Details: $115,000.00 to $120,000.00 per year Search managed by: Laura Orozco Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionSalary: $120-$150K Position: Sr. Electrical Design Engineer / Project Engineer III Location: Bohemia, New York Overview: We are seeking a highly skilled Electrical Design Engineerwith a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems. The ideal candidate will have a solid theoretical background in electrical engineering, specifically in power supply design, and experience with designing for manufacturing. Key Responsibilities: • Apply a strong theoretical background in Electrical/Power Supply Concepts to design and develop power supply systems that meet the required specifications and standards., • Design for Manufacturing (DFM): Ensure all designs are optimized for ease of manufacturing, considering cost, scalability, and quality control., • Utilize hands-on experience in electrical power supply design to innovate, troubleshoot, and refine power supply products. Qualifications: • Bachelors degree in electrical engineering or a related field., • 5-10 years of hands-on experience in power supply electrical design, • Thermal system design for power supply, • Knowledge of safety and reliability standards for power conversion devices, • Knowledge in firmware programming a plus, • Knowledgeable in simulation, computation program is a plus, • Manufacturing best practices knowledge is a plus Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description AI Solutions Engineer Are you a technology-focused, problem-solving individual looking to jump-start your career? We are IVIONICS, a growing technology organization in search of a talented AI Solutions Engineer to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? * Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector. * A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office. * Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively. * Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills. * Competitive Compensation. We recognize your hard work and want to reward you for it. In addition to a competitive salary, all employees are eligible for a comprehensive suite of additional benefits including medical/dental/vision, retirement plans, paid time off, and more. Responsibilities: * Design, develop, or implement AI/ML models aimed at enhancing automation in legal workflows - think smart document categorization, contract parsing, and intelligent query systems. * Prepare, clean, and engineer features from structured and unstructured legal and technology operations data. * Collaborate with senior engineers and legal tech consultants to deploy models into production, maintaining alignment with security and compliance standards. * Contribute to research projects, prototypes, and the adoption of new AI architectures and tools. * Monitor model performance, refine for accuracy and stability, and ensure models meet operational demands. * Create clear documentation: model behavior, limitations, processes, and maintenance procedures. * Stay informed about AI/ML developments, best practices in MLOps, and relevant legal-tech innovations. Requirements: * 3–4 years of experience in AI, ML, or data engineering, preferably in a startup or SMB environment. * Strong Python skills with familiarity in AI/ML libraries like TensorFlow, PyTorch, or Scikit-Learn. * Understanding of data structures, statistical modeling, and foundational ML algorithms. * Comfortable working with both structured and legal/unstructured text data. * Commitment to high standards of data governance, documentation, and security. * Experience with data manipulation and analysis tools. * Experience with version control systems (Git/GitHub). * Ability to work with structured and unstructured datasets. * Familiarity with cloud platforms (AWS, Azure, or GCP). * Eagerness to learn and stay current with AI/ML trends and technologies. * Basic knowledge of deep learning concepts (neural networks, CNNs, RNNs) * Experience with natural language processing (NLP) for text analysis and document classification (preferred). * Awareness of data governance, privacy, and compliance standards relevant to legal technology (preferred). IVIONICS is committed to being an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, ethnicity, age, disability, marital status, veteran status, or any other characteristic protected by law. Powered by JazzHR IhH4ohWLzy

My client is a rapidly growing general contractor delivering complex public infrastructure projects throughout the NYC metro area for MTA, NYCTA, Amtrak, and related agencies. In just five years they have grown from 100 to 500+ employees, increased bonding capacity from $300M to $2B, and continues to scale with strategic long-term goals. Their employees work in a culture that fosters work to life balance, family values and a progressive culture which results in employees retiring by 60. Position Overview The Superintendent will lead field operations on large-scale rail and transit projects, overseeing crews, subcontractors, safety, quality, and coordination with agency partners, to ensure immediate and successful project execution. The Superintendent will be executing projects from $60m to $200m+ working closely with multiple agencies and other National General Contractors of Joint Ventures. • Provide on-site leadership and coordinate day-to-day execution of rail construction, maintenance, safety, and operational activities., • Supervise construction crews, subcontractors, and union personnel while maintaining a strong safety culture., • Collaborate with MTA representatives, project managers, and inspectors to ensure compliance with contract requirements and transit standards., • Plan, schedule, and coordinate work activities to minimize service disruptions and maintain project milestones., • Review work plans, daily logs, quality inspections, and ensure work meets engineering specifications., • Monitor field performance and implement corrective actions as needed to meet safety, quality, and productivity goals., • Enforce compliance with all safety regulations, site rules, and transit system access protocols. Compensation and Benefits: • Strong base compensation, • Bonus – Project based ranging from $80k-$120k+, • Industry-leading health insurance (full family coverage), • Dental & vision fully covered, • 401(k) and Profit-Sharing Scheme, • PTO + paid holidays, • Work hard / play hard culture with company events and long-term career security

NOT IT RELATED LHH Recruitment Solutions has an opening for a Project Administrator for our client in the Bohemia, NY area. This direct hire role allows you to expand your project management career within a state-of-the-art technology organization. You will be responsible for the execution and oversight of multiple projects, throughout the entire project execution cycle, according to published scope of work and project definition. Candidates should have experience in capital equipment system projects, financially and commercially, from receipt of purchase order through customer acceptance. This on-site role requires a minimum of three-years current experience in project management experience in a project administration role for a technological manufacturing organization. Prior experience working in the x-ray or non-destructive testing (NDT) market HIGHLY preferred. THIS IS A FULLY ON SITE ROLE. Candidates MUST have experience in preparing and submissions of technical and formal engineering reporting. Salary range estimation: $95,000-$110,000.00 annually. RESPONSIBILITIES: • Primary point of contact for customer and fully responsible for the oversight of customer expectations, communication, and client satisfaction., • Thoroughly review all customer commercial terms and conditions and manage any possible and occurring deviations to ensure all terms are acceptable to both organizations and parties involved., • Ensure project designs and deliverables meet the defined scope of work, technical proposal outlines and/or customer specifications., • Collaborate with multiple teams to develop and implement a budget and schedule for each and every project., • Monitor task completion, purchasing and material control to ensure all completed according to schedule and budget., • Raise red flags for all deviances, possible or occurring., • Manage all project subcontractors, fabricators, vendors in accordance with project SOW., • Manage schedules and budgets aligned with customer requirements., • Prepare weekly reports for management/stakeholders to summarize progress of project execution against budget and schedule including variances and red flags noted., • Work with sales team pre and post-sale to fully understand project scope and pricing., • Interact with a cross-disciplinary engineering team, operations team, installation team and sales team to ensure proper management, execution and completion of project according to defined budget and schedule., • Travel to customer sites worldwide to participate in concept and technical discussions, kick off meetings, oversee installations, or to ensure maintenance of a positive customer relationship. Global travel up to 20% of the time with potential travel to India, China, and France. REQUIREMENTS: • Proficient in SolidWorks., • Proven proficiency in MS Office Suite and MS Project., • Candidates MUST have experience in preparing and submissions of technical and formal engineering reporting., • Must have minimum five (3) years of project management experience with at least two (2) years of concentration on budgeting, cost management and commercial terms oversight., • Should have experience managing capital equipment projects., • Experience working with an ERP or MRP system – MS Dynamics highly preferred., • Proven proficiency in establishing, negotiating, and monitoring commercial terms and conditions., • Must be able to thrive in a fast paced, demanding environment and able to quickly assess project status and take appropriate action to control and maintain project scope, schedule, and budget., • Proven capability of effectively communicating both internally and externally using all available methods of communication., • Prior experience in a QA controlled design environment. (ISO 9000, NQA-1, or similar), • Understanding or prior experience working in the x-ray or non-destructive testing (NDT) market HIGHLY preferred., • Fluency in multiple languages a plus. Health insurance, dental insurance and life insurance are offered with this full-time direct hire role. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance

We are seeking an enthusiastic, engaged engineer who can complement our existing practices and capabilities to support our growing civil engineering staff. Help mentor junior engineering staff. Bachelors Degree in Civil Engineering or closely related discipline.

Senior Manufacturing Engineer At Curtiss-Wright, we lead the design, engineering, and manufacturing of advanced systems and components for the aerospace and defense industry. We are seeking a Senior Manufacturing Engineer to join our team, a role that requires deep technical expertise, strategic thinking, and leadership in driving manufacturing excellence. This is an exciting opportunity for an experienced engineer to influence manufacturing processes at a high level, leading initiatives from concept through production, and ensuring the seamless transition of innovative products into full-scale manufacturing. LOCATION: Hauppauge, NY SALARY RANGE: $94,700 - $110,000/year Please note that the salary range information provided is a general guideline only, reflecting a position based in NY. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. WE TAKE CARE OF OUR PEOPLE Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * YOUR CHALLENGE: \n • Lead the development and implementation of advanced manufacturing methods, process flows, and operational sequences to optimize efficiency, quality, and cost.\n, • Design and oversee the creation of tools, fixtures, and assembly processes to support complex production requirements.\n, • Collaborate closely with design engineering to review product designs, ensure manufacturability, and drive smooth product launches.\n, • Perform detailed manufacturing cost analyses, establish labor standards, and recommend process and tooling improvements.\n, • Develop, maintain, and standardize manufacturing work instructions, standard operating procedures, and documentation.\n, • Mentor and guide cross-functional teams, including design, manufacturing engineering, production, procurement, quality, and inspection.\n, • Lead initiatives in lean manufacturing, process improvement, and labor efficiency, using data-driven analysis.\n, • Bachelor's degree in Mechanical, Manufacturing, or related Engineering discipline; advanced degree preferred.\n, • Extensive experience reading and interpreting complex technical drawings and specifications.\n, • Proficiency with CAD tools (e.g., SolidWorks) and other manufacturing design software.\n, • Deep understanding of mechanical and electronic assembly principles.\n, • Advanced proficiency in Microsoft Office Suite, including Excel, Word, PowerPoint, Project, and Outlook.\n, • Strong analytical, problem-solving, and communication skills, with meticulous attention to detail.\n, • Expertise in statistical analysis and applied mathematics (probability, geometry, trigonometry).\n, • Familiarity with manufacturing standards, process documentation, and ERP systems.\n Our Values Environmental, Social and Governance *Please note, benefits are country specific and may vary from location to location. #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Electrician - Facilities Engineering - Full Time, Evenings. Position Summary: We have an exciting opportunity to join our team as an Electrician - Facilities Engineering - Full Time, Evenings - Facility Mgt-Plant Main&Repair - - Tue.

Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related technical field. This is a full-time, on-site role for a Junior Building Automation Systems (BAS) Engineer located in Ronkonkoma, NY.

The Engineer performs interior and external preventative maintenance and basic repairs in safe and efficient compliance with policies and procedures, brand standards, and federal, state, and local regulations. Responds to engineering service calls. Promptly reports emergencies, accidents, injuries,

Long Island Community Hospital.As Long Island's only independent community hospital, we are 100% committed to becoming the community's healthcare provider of choice with our greatly enhanced services including the Knapp Cardiac Care Center, our highly-advanced heart disease diagnosis and treatment f

J1939, proprietary protocols) for emergency vehicle applications. Work closely with OEMs, upfitters, and engineering teams to define application requirements and implement tailored solutions. Bachelor's degree in Electrical Engineering, Mechatronics, or related field (or equivalent experience).