Engineering jobs in Syosset, New YorkCreate job alerts

We are looking for a Senior Manufacturing Engineer for our Westbury, NY facility. \n \n Your Responsibilities: \n • Support production activities to achieve shipment schedules through the development and design of methods, processes, specifications, tooling, jigs, fixtures and/or equipment modification in conformance with basic and sound engineering principles, policies and practices.\n\n, • Assure most efficient, economic and productive plant layout, material flow and machine and labor utilization by planning the layout of factory machinery, the sequence of manufacturing operations and the specific procedures required for the fabrication, assembly and/or test of Component's Group products. Prepare and carry out plans to change part or material specifications, manufacturing methods, material or product routing, etc. and/or devise holding mechanisms and required tooling to facilitate product manufacture.\n, • Reduce the cost to manufacture products and increase current efficiencies through research of newer or advanced technologies and development of proposals for automation and/or the redesign of methods, tooling, machine attachments, etc. Also, efficient methodizing will reduce direct labor and, therefore, product cost. Prepare cost estimates involved in the changing from the present to new methods and estimate cost savings as the result of such changes. Recommend or determine the critical make or buy decisions on the basis of the Component's Group technical capabilities, equipment, labor and available capital.\n\n, • Assure production of quality parts, components and products by verifying machine, equipment and tool efficiency and performance. Investigate and initiate corrective action of problems or deficiencies\n\n, • Assure timely introduction of new products and/or methods by communicating and documenting required production operations through the preparation of operation sheets, manufacturing data base entries (ERP (Routings), (Setup sheet info.), (AutoDesk/AutoCad), visual aids and CNC programs if required. In addition, the Senior Manufacturing Engineer is expected to evaluate schedule milestones in early phases of design and prototype work, monitor costs, and assure quality and serviceability are considered during design and manufacture.\n, • Assist in the development and design of new products by providing advice on and determining the producibility of design concepts and the specification requirements that best utilize existing equipment, technologies and manufacturing techniques. In this capacity, the Manufacturing Engineer will inform design engineers of both manufacturing limitations and opportunities and will advise Manufacturing Engineering Management of new capabilities that competitive designs will require for the factory. Provide manufacturing input and provide a smooth transition into efficient production.\n\n, • Support production activities to achieve shipment schedules through the introduction of new technologies, the development and design of methods, tooling, jigs, fixtures and/or equipment modification in conformance with basic and sound engineering principles, policies and practices.\n\n, • Program CNC machines through CAD/CAM, Conversational or manual methods.\n, • Setup, prove-out, and optimize part manufacturing on CNC machines.\n\n, • Train other manufacturing personnel on programming and setup of CNC machines.\n \n Your Profile: \n\n • A Bachelor’s degree in Manufacturing Engineering or a related discipline or the equivalent in experience. \n, • Knowledge of CAD/CAM and a strong knowledge of CNC Programming are necessary. \n, • A full understanding of manufacturing process and the ability to fully apply the theories and concepts of manufacturing is essential.\n, • Typically, the degreed incumbent would require 4 - 5 years directly related experience to perform at this level. \n, • Ten years of varied machine shop, tool making.\n, • CNC programming and machining or other specialized manufacturing experience would be required for non-degreed employees to perform at this level.\n\n \n We offer: \n Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! \n The perks and benefits of working at Oerlikon include the following: \n\n • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • 100% company paid life insurance and disability insurance\n, • Employee Referral Bonus program because why not to bring your friends to work everyday!\n\n \n Why Oerlikon: \n Innovation and innovators thrive at Oerlikon, a leader in engineering solutions that enhance the performance of our products and services. We are diverse in our perspectives but united in our purpose: to develop technologies that reduce resource and energy consumption and help build a healthier, more sustainable and better protected world \n \n #joinoerlikonus #joinourteam \n \n Are you curious? Then release your passion to succeed and APPLY to discover how you can help us build a better world and realize how you can make a personal difference by joining our global team! Our commitment is your success! \n \n For individuals assigned, hired to work or working remotely in/out of California, Colorado, Connecticut, Illinois, Nevada, Washington State, or New York, Oerlikon is required by law to include a reasonable estimate of the current compensation range for this position, which is $110,000 to $130,000 per year. Some positions within Oerlikon may also offer eligibility to participate in a discretionary incentive program. The salary of the finalist(s) selected for the role will be based on a variety of factors that are considered in making compensation decisions including, but not limited to, internal equity, job location, work experience, education, training, certifications, licenses, etc. Therefore, as compensation decisions are dependent on the facts and circumstances of each individual, it is likely that not all applicants will be hired at the highest end of the listed compensation range. Our total compensation package goes beyond base compensation and it will include a competitive benefits package starting with 2 weeks paid time off accrued on a monthly basis, 12 holidays, 48 hours personal/sick time (exception for NY where we follow State law,) medical, dental, vision, 401K, holidays, pet insurance and tuition reimbursement all effective day one of hire. \n \n Agencies: \n Oerlikon only accepts agency resumes for positions that have been explicitly approved by HR for third-party support. We work exclusively with our approved vendors who have agreed to Oerlikon’s terms and conditions and have an executed contract in place. Any resumes or profiles submitted to Oerlikon employees for roles not approved and requested by HR will be considered unsolicited, and Oerlikon will not be obligated to pay a placement fee.

Sr. MEP Engineer/Project Manager US-NY-Syosset Job ID: 2021-2365 Type: Regular Full-Time of Openings: 1 Category: MEP The LiRo Group Overview We have an immediate need for a Sr. Mechanical Engineer (focusing on HVAC designs) for our Syosset, NY location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities This role as Senior Mechanical Engineer will be focused on a mix of project types, everything from critical environment healthcare designs to energy performance work and large public infrastructure projects. The ideal candidate will have extensive experience designing and responding to the needs of multiple clients and projects simultaneously. Additional responsibilities will include: • Lead the design and development of HVAC systems for commercial and institutional projects. Projects can include healthcare work such as operating rooms, CSS, pharmacies, in-patient hospitals, And outpatient facilities. Projects could also be Public Works, with clients such as DASNY, CUNY, NYS OGS, and NYCHA., • Lead a team to conduct site surveys and assessments to gather data for system design and retrofitting., • Collaborate with architects, clients, and other engineering disciplines to integrate HVAC systems seamlessly into building designs., • Utilize engineering software such as AutoCAD, Revit, and HVAC load calculation tools to create accurate designs and calculations., • Perform energy modeling and analysis to optimize system performance and ensure compliance with energy codes and standards., • Provide guidance and mentorship to junior engineers and designers., • Stay updated on industry trends, advancement, and best practices in HVAC design and engineering. Qualifications • Bachelor’s Degree in Mechanical Engineering, Master's Degree preferred, • Professional Engineering (PE) license required, • 10 - 15 years of industry experience, • Proven track record of designing multiple projects at the same time and meet deadlines, • Knowledge of NYS / NYC / International Building Codes., • Familiarity with Healthcare codes and standards is a significant plus, • Strong knowledge of building systems and construction methodologies, with experience evaluating diverse facility types, • Excellent communication skills with the ability to convey technical information clearly to diverse audiences., • A detail-oriented mindset committed to accuracy and precision., • LEED accreditation a plus, • Certified Energy Manager a plus We are committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $130,000: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location. • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 #LI22 PIf0f329f20d89-37820-27987400

Senior Associate Civil Engineer US-NY-Mineola Job ID: 2023-2871 Type: Regular Full-Time of Openings: 1 Category: Civil/Structural Engineering The LiRo Group Overview We have an immediate need for a Senior Associate Civil Engineer for our Mineola, Long Island Office. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities • Serve as lead civil engineer for local townships and villages on Long Island in the consultation, review and preparation of site plans, roadway improvements, drainage upgrades, traffic safety, and streetscape efforts., • As the village or township engineer, lead the preparation of design plans, bid books and specifications, oversight of construction inspections, and final closeout of construction., • Attend planning board meetings and serve as a specialty civil engineering consultant (attendance at evening meetings once per week on average)., • Respond to RFPs and prepare letter proposals for new contracts and task orders., • Lead and direct civil engineering design staff as well as field inspectors on ongoing municipal projects., • Quickly respond and travel to local building departments and departments of public work as LiRo’s representative to support local infrastructure projects., • Perform plan reviews for quality assurance, constructability, and conformance to Nassau County, Suffolk County, and NYSDOT standards., • Financial management of projects and resource staffing., • Attendance at industry functions and business development events Qualifications • Bachelor of Science in Civil Engineering, • 10+ years’ experience in Civil Engineering, • NY PE required, • Ability to provide guidance to junior level engineers, • Understanding and application of local code requirements, • Strong written and verbal communication skills, • Ability to multitask and consistently meet deadlines Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $125,000; Maximum: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role., • Please visit our website for all of our career opportunities at ___ #ID22 #ZR22 PIbf6713d7bc47-37820-33502547

BS in Mechanical Engineering, Electrical Engineering, Materials, Reliability, Industrial Engineering or Physics. RELIABILITY ENGINEER QUALIFICATIONS: 3+ years experience as a Reliability Engineer in Electronics or equivalent industry. One of our clients, a major electronics manufacturer is looking f

Title: Industrial Engineer Salary: $80,000 – $95,000 DOE Location: Melville, NY Duration: Permanent We are seeking an Industrial Engineer who will be working closely with Manufacturing, Engineering, Quality and Management to ensure the highest quality product is delivered to our customers.

Experience must include a minimum of: 5 years of experience with voice services, including Cloud Hosted VoIP, IP Phones, and standard Voice platforms; 5 years of experience with mobility services, including functioning of end devices; 5 years of experience with data services, including broadband and

Esswein Associates is looking for Licensce Landscape architect to work with me on designing High End resdiential designs from the swimming pool to the patios along with the planting.Hopefully work with us on sale of the project fro comission, need to be able to attend ARB Hearing with Me We are Lans

Haugland Group, a privately-owned Long Island, New York-based civil infrastructure and energy construction company has an immediate opportunity for an experienced Project Engineer to join our team. We are looking for an experienced, self-motivated, highly organized individual to join the Project Management team to provide all facets of construction project support, including submittal processing, material management, and budget analysis. At Haugland, we understand that pushing the boundaries of what has been done is essential to develop the infrastructure of tomorrow. The journey won’t be simple, but what gets us there is. At Haugland Group, Our Word is Our Way. We are leaders in building what’s next because we see the path to get there and we’re setting a new standard of exceptional along the way. Let’s build together! Key Functions • Coordinate with the Project Management team on engineering and procedural plans, and suggest project enhancements/value engineering opportunities, • Prepare and track project submittals, • Facilitate Change Order process, prepare monthly budget analysis, and projections/cost to complete, • Manage CPM baseline and updates, • Manage RFI’s and engineering-related inquiries, • Assist with project purchase orders and subcontracts, • Ensure all project materials are approved, delivered and tracked accordingly, • Coordinate with the finance department to prepare, review and evaluate monthly costs, • Update and maintain the company ERP system with all current project information in the appropriate programs Desired Qualifications • 5+ years of relevant experience, ideally in construction management, • Bachelor’s Degree in Construction Management Utility Engineering preferred, • Experience with ERP management and improvements, • Proficient in the use of Microsoft Office and standard computer applications, • Display a high level of initiative, effort, and commitment towards completing assignments in a timely manner, • Ability to identify problems; determine accuracy and relevance of information; use sound judgment to generate and evaluate alternatives, and make recommendations, • Effective communication skills, interpersonal and organizational skills, and a strong work ethic Why Haugland? Compensation range for this role is 90-120k At Haugland Group, our benefits are designed to convey company culture and values which has employees at its forefront. • Excellent benefits package including medical, prescription drug, dental, vision, Health Savings, short/long term disability, and life insurance, • 401k with 5% employer match, • Employer funded Dependent Care FSA, • Potential for annual performance-based raise, • Paid Time off, • Paid company observed holidays, • Educational and professional advancement opportunities, • Frequent company-sponsored events, • Relaxed, friendly office, • Fast paced, exciting environment Haugland Group LLC and its operating divisions, affiliates, related entities, and subsidiaries (collectively, “the Company”) do not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered property of the Company and therefore, the Company will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Only upon the Company’s written request may preferred vendors may be invited to refer talent for specific open positions. In these cases, a fully executed agreement with the Company must be in place and current. We are an Equal Opportunity Employer.

• Design, Permit, Construction Plans, Specifications and Bid Documents, • Hydraulic Modeling and Analysis of Systems, • Site Assessments, Inspections and Condition Assessment of Existing Infrastructure, • Quantity Take-offs and Construction Cost Estimates, • Strong Understanding of Wastewater Treatment Process, • Collaborate with Multidisciplinary Teams including Surveyors, Engineers, Environmental Scientists, etc., • Knowledge of Local Permitting to Ensure Designs meet Regulatory Standards, • Client & Contractor Coordination, • AutoCAD/Civil3D, • Proficient in Microsoft Office, • US Citizenship or Green Card Required

Position Title: Manufacturing Engineer Position Description: Protingent Staffing has an exciting Direct Hire opportunity for a Manufacturing Engineer with our client that is in Plainview, NY. Job Description: • The Manufacturing Engineer is responsible for developing, implementing, and sustaining efficient, compliant, and cost-effective manufacturing processes in a contract manufacturing environment., • This role supports a wide variation of manufacturing processes, including CNC machining, finishing, secondary operations, and small mechanical assemblies for complex medical device components., • The Manufacturing Engineer ensures compliance with FDA Quality System Regulations (21 CFR Part 820) and ISO 13485 standards while leading process optimization, supporting quotations, and driving continuous improvement initiatives across the value stream. Job Qualifications: • Education: Bachelor’s degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or related field., • 10+ years of experience in manufacturing engineering within a regulated environment (medical device preferred)., • Hands-on experience in a machine shop environment., • Experience across a wide range of manufacturing processes, including CNC machining (multi-axis milling/turning), finishing, deburring, cleaning, passivation, and small assembly., • Strong background in process validation (IQ/OQ/PQ) and regulatory compliance (FDA QSR & ISO 13485)., • Proficient in CAD/CAM and GD&T., • Knowledge of value stream mapping, FMEA, Lean Manufacturing, Six Sigma, and SPC., • Ability to support quotation processes with accurate cycle time and cost analysis., • Excellent documentation, communication, and cross-functional teamwork skills., • Ability to manage multiple projects in a fast-paced, contract manufacturing environment., • Strong problem-solving, analytical, and leadership skills. Job Details: • Job Type: Direct Hire, • Salary Rate Range: $110-130K, • Location: Plainview, New York. About Protingent: Protingent is a niche provider of top Engineering and IT talent to Software, Electronics, Medical Device, Telecom, and Aerospace companies nationwide. Protingent exists to make a positive impact and contribution to the lives of others as well as our community by providing relevant, rewarding, and exciting work opportunities for our candidates.

CNC Programming Engineer We are looking for a CNC Programming Engineer to join our Target Rock team! As our CNC Programming Engineer you will interact with and support the machine shop production and personnel. The individual receives minimum direction from the Plant or Manufacturing Engineering Manager regarding methodology of manufacturing. The individual is responsible to generate methods in detailed format for Manufacturing Production. The individual will perform all necessary tool and fixture designs for both manufacturing and quality requirements. The individual will interact with both in-house manufacturing personnel, as well as vendor interaction in the support of all tool and fixture fabrication. The individual supports CNC Programming methods within our manufacturing facility. Location: East Farmingdale, NY Salary/hourly rate: $82,200 to $120,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge \n • Generates Operation Sheets to support all phases of manufacturing within the facility. \n, • Identifies and designs necessary tooling and fixtures required to support manufacturing processes.\n, • Interacts with in-house and vendors in support of manufacturing components, as well as tool and fixture fabrication.\n, • Performs quotations for pricing inquiries, as well as manufacturing budget review for manufacturing processes.\n, • Maintain all applicable manufacturing project documentation.\n, • Additional responsibilities as assigned by Supervisor.\n, • Assists in the training of shop personnel to optimize defined manufacturing processes.\n, • Must be a US citizen\n, • Associate Degree minimum in Manufacturing/Mechanical Technology or equivalent related field or a commensurate level of related experience.\n, • 5 to 10 years experience performing manufacturing engineering responsibilities, inclusive of manufacturing methods, tool and fixture design, and budget and cost analysis. \n, • Working knowledge of Mastercam CAD/CAM software version 8.xx or greater.\n, • Ability to methodize complex parts with minimum supervision. Knowledge of machine shop practices and techniques.\n, • Design and overview tool and fixturing requirements for manufacturing components.\n, • Knowledge of raw materials and related machinability. Ability to define applicable feeds - speeds combinations for established manufacturing process.\n, • Ability to generate CAD drawings.\n, • Capable to analyze manufacturing equipment or tooling problems to efficiently implement solutions to economically solve these production problems in a timely manner.\n, • Broad knowledge of computer-controlled machine tools.\n Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Here, they learn theory and practical application of nuclear physics and reactor engineering.

Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. About BAE Systems Electronic Systems. At BAE Systems, you'll find a rewarding career that truly makes a difference.

The Senior Manager of Cybersecurity Detection Engineering will lead a team of Detection Engineers in designing, implementing, and maintaining advanced detection capabilities to safeguard the organization against emerging cyber threats. Manages and maintains SIEM/Data Lake data management and log ing

Job DescriptionA multi-discipline architectural, engineering, and environmental consulting firm is seeking a Senior Forensics Engineer for their growing office in Huntington, New York! Responsibilities: • Conduct residential and commercial forensic investigations to analyze/determine structural damage for insurance companies, attorneys, private homeowners and property owners, • Investigate and assess damage due to catastrophes, • Prove evaluations are correct by researching technical publications and literature, • Apply engineering principles and practices in accordance with codes and industry standards, • Provide client with detailed forensic engineering reports outlining cause and origin of damage, • Manage multiple projects and meet project deadlines, • Provide clients and team with timelines and project updates Experience: • Bachelor’s Degree in Architecture or Engineering or closely related discipline required, • Master’s Degree preferred, • 6+ years of experience in architectural or engineering, • 1+ year of forensic engineering experience required, • E.I.T. required, • PE License or RA License preferred, • Experience working with law firms and insurance companies preferred, • Experience with depositions and expert testimony preferred, • Prefer management and supervisory experience, • Experience with premises and walking surface investigations, • Experience with product defect cases preferred, • Candidates with experience in accident reconstruction and automotive failure analysis considered Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description A multi-discipline consulting firm is seeking a Project Wastewater Engineer for their growing team in Huntington, New York! Responsibilities: • Perform various engineering tasks including wastewater collection, conveyance, and treatment processes, • Lead engineering evaluations, • Prepare design calculations, reports, plans and specifications, • Perform construction administrative tasks (construction phase management activities, coordinate shop drawing reviews, RFI responses, develop construction change orders), • Communicate directly with clients, • Confirm accuracy of plans/specifications, • Perform field activities (site investigations, witness testing and milestone construction observation), • Supervise/manage junior staff, • Assist with business development (write technical proposals/assist with budgeting), • Lead pursuit of small to moderate size projects Requirements: • BS in Engineering (Civil, Environmental, Chemical or Mechanical), • 5+ experience in design of wastewater treatment plants, collection and conveyance systems, and alternative onsite treatment systems, • PE License or ability to obtain in six months, • Microsoft Office Suite experience (Word, Excel, Access, Teams, Outlook), • Knowledge of Autodesk Revit and Civil 3D software Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

As a Wastewater Staff Engineer at Bohler, you will:. Open and transparent communication with senior leadership as well as local office management. Wastewater treatment/pump station design internship or previous experience preferred.

H2M architects + engineers, a multidiscipline architectural, engineering, and environmental consulting firm in Melville, NY seeks an. Senior Project Electrical Engineer. BS in Electrical Engineering from an accredited program.

Our company is seeking an Industrial Engineer who will be working closely with Manufacturing, Engineering, Quality and Management to ensure the highest quality product is delivered to our customers. Industrial Engineer role at Air Techniques. Review and calculate labor, material and other production

Project Engineer Qualifications. We are seeking a driven and detail-oriented Project Engineer to join our growing team. This role offers hands-on involvement in municipal, infrastructure, and mechanical construction projects, including water, wastewater, and fire protection systems.

Then, working as a Class I Engineer with Chartwell Hospitality may be just the right place for you to use your technical knowledge and knack for fixing.

A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. Provide direct support to Sales and Solutions Engineers in their efforts to position our emerging Altice Products and Services.

In this role, you will work within a project team to support wastewater infrastructure projects from initial project programming through construction with the support and guidance of seasoned professionals. Lead administrative and project management related tasks for various engineering design proje

Procore daily to follow-up on and/or summarize project issues, agreements, communications with owners and subcontractors, etc. Assist in management of all subcontractors.

Maintenance: Perform general repairs and assigned maintenance duties in a satisfactory and timely manner; respond to complaints or problems from guests or other departments in a timely manner; keep tools and maintenance equipment clean and secure; complete preventive maintenance duties on schedule.

Energy Jobline is the largest and fastest growing global Energy Job Board and Energy Hub.We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.We focus on the Oil & Gas, R

This role offers hands-on involvement in municipal, infrastructure, and mechanical construction projects, including water, wastewater, and fire protection systems.

Ensure all project technical requirements are captured on the project's bill of material. Project Engineer to join our Target Rock team!. You will direct all engineering aspects of projects related to design, development, and supply of high-pressure valves for nuclear power applications or industria

Water Resources team at our Melville, NY office.Project involvement and/or supervision of water planning and design projects, water planning, design and construction engineering services.Coordination with other engineering and architecture departments within the firm.Preparation of construction draw

Host Discovery workshops and design work sessions to obtain requirements clarity regarding added technology components and how current settings support Discovery capabilities for new onboarded technologies. Execute deep technical configuration and scripting for ServiceNow ITOM: Discovery patterns, s

Able to communicate ideas and recommendations to non-engineer team members in a clear manner. We are seeking a seasoned Full Stack Developer to work along-side, a team of software engineers, in a collaborative Agile environment to develop and maintain new and existing software applications. Utilize

For over thirty years, SAM has built a reputation as a trusted, knowledgeable, and innovative partner.Our licensed professionals transform petabytes of complex spatial data into intelligent insights in a holistic Managed Geospatial Services (MGS) framework.As North America's premiere MGS company, SA

The Senior Manager of Cybersecurity Detection Engineering will lead a team of Detection Engineers in designing, implementing, and maintaining advanced detection capabilities to safeguard the organization against emerging cyber threats. Work with internal IT teams and external MSSPs for creation and

Manager, Clinical Operations - Clinical Engineering - Mineola. Position Summary: We have an exciting opportunity to join our team as a Manager, Clinical Operations - Clinical Engineering - Mineola. The Operations Manager is accountable for all clinical equipment maintenance.

Job Description Job Description Schivo Medical in Plainview, New York manufactures a diverse range of essential medical technology solutions. Working with us, you will be apart of the manufacturing process of a vast array of different products including robotic surgery instruments medical devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work with a team of professionals that are committed to helping create parts that save lives and help assist you with a fulfilling and rewarding career. Senior Manufacturing Engineer job summary: A Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. Their duties include researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Senior Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • 10 years of work experience as a manufacturing engineer or similar role needed, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g. CAD, MS Office), • Project management skills, • Problem-solving ability, • Teamwork skills, • Degree in Mechanical Engineering or related field(CNC Machining), • Green belt certificate a plus, • Working knowledge with continuous improvement process Senior Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, test, and implement manufacturing process., • Study production and machine requirements, • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Develop and mentor Junior engineers, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with new technology Benefits: • Employee referral, • 401(k), • 401(k) matching, • Dental insurance, • Vision insurance, • Life Insurance, • Employee assistance program, • Health insurance, • Paid time off, • Referral program * Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description Position Description: Seeking a motivated, intelligent and hard-working individual to Develop and maintain quality and regulatory compliance in Genadynes' processes. Individual will ensure compliance with ISO 13485 and MDSAP requirements are maintained. Specific Responsibilities : Ensure the quality and processes are practiced and maintained. Compile documents required for audits. Create and maintain product technical files. Initiate corrective and preventive actions for non-conformities. Maintain/calibrate the accuracy of all testing equipment. Conduct risk assessments of medical devices and processes. Maintaining the effectiveness of quality control system and non-conforming materials control system. Discuss and solve quality problems with vendors. Investigate problems and make improvement on current processes. Develop/design effective test methods. Facilitate software design and development for medical devices. Performance testing and reporting on software, hardware and the compatibility for all accessories. Perform risk assessments for medical devices and accessories. Development and prototyping of new products with existing or new vendors. Abilities: Familiar with FDA CFR 820, ISO 134850, SOPs regulations. Extreme attention to details. Ability to think outside the box with excellent problem solving abilities. Excellent interpersonal, communication, and writing skills. Highly organized. Excellent computational skills. Knowledge of European regulations is a plus. Knowledge of common medical materials (silicone, polyurethane, etc.) Knowledge of electrical circuits and basic programming. Knowledge of C/C++ is a plus. Maintain MDD/MDR EN ISO Experiences: Regulatory compliance. Quality management. Cross functional team management. Quality assurance Requirements: Bachelor degree in mechanical, electrical, material, biomedical engineering or relative field. (Master degree preferred.) Benefits: Medical, Dental, Vision, PTO, 401K, Legal Services, FSA, Life Insurance Salary Range: $68,000 - $72,000/Annual Powered by JazzHR oSPuR7OKHc

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off Location: Long Island, New York Company: Harlequin Design New York Inc. About Us: Harlequin Design New York Inc. is a leading design and fabrication agency specializing in innovative solutions across various industries. We pride ourselves on our commitment to quality, creativity, and collaboration, creating exceptional designs that exceed client expectations. Job Description: We are seeking a talented SolidWorks Engineer to join our dynamic team. The ideal candidate will have a strong background in 3D modeling and engineering design, with a passion for creating precise and functional products. You will work closely with our design and fabrication teams to bring concepts to life and ensure the highest standards of quality and performance. Key Responsibilities: • Develop and modify 3D models and technical drawings using SolidWorks., • Collaborate with engineers and designers to translate concepts into detailed designs., • Conduct feasibility studies and simulations to optimize designs., • Prepare and maintain documentation related to design specifications and revisions., • Assist in prototyping and testing to validate designs and improve performance., • Provide technical support during the fabrication process and address any design-related issues., • Stay updated on industry trends and advancements in CAD technologies.Qualifications:, • Bachelors degree in Mechanical Engineering, Industrial Design, or a related field., • Proficiency in SolidWorks; additional CAD software knowledge is a plus., • Strong understanding of engineering principles, materials, and manufacturing processes., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team-oriented environment., • Effective communication skills, both written and verbal.What We Offer:, • Competitive salary and benefits package., • Opportunities for professional development and career growth., • A creative and collaborative work environment., • The chance to work on diverse projects that make an impact.

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details:

Job DescriptionMulti-discipline architectural, engineering, and environmental consulting firm is seeking a Senior Structural Engineer for their Huntington, New York office! Responsibilities: • Lead/manage the design team in executing/delivering structural engineering assignments and plans, • Prepare calculations, charts and graphs, • Monitor work for code compliance and accepted engineering practices, • Projects include low to mid rise buildings and concrete structures, • Perform inspection/analysis of existing buildings, • Oversee development of construction drawings and design specifications for bids, • Develop proposal letter that includes technical scope and fee, • Prepare client letters and reports, • Manage projected financial budgets, • Mentor/train junior staff Requirements: • Bachelor’s degree in Civil Engineering with a focus on Structural Engineering, • 8+ years of Structural Engineering experience, • EIT required, • PE License preferred, • Experience managing budgets, • Supervisory experience, • Experience writing proposal preferred, • Knowledge of ETABS, STAAD.Pro, RAM preferred, • Knowledge of Revit preferred, • Proficient in Microsoft Word and Excel Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description A multi-discipline engineering firm with over 70 years in business is looking for a Senior Water Resources Engineer for their Huntington team! Responsibilities: • Assist/supervise water planning/design projects (water planning, design, and construction engineering services), • Coordinate tasks with other departments, • Prepare construction drawings/specifications for public bid, • Build/maintain client relationships, • Responsible for high quality projects being completed on time and on budget and meeting quality standards, • Supervise junior staff, • Responsible for financial performance, cost proposals, and project financial performance Requirements: • Bachelor’s degree in Civil, Environmental, Mechanical, Chemical Engineering, or closely related discipline, • 6+ years of water resources or related consulting/design experience, • Experience in wastewater project design preferred, • Construction experience preferred, • PE License preferred, • Experience with CBS (Chemical Bulk Storage) and Petroleum Bulk Storage (PBS) Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job DescriptionA multi-discipline engineering firm with over 70 years in business is looking for a Senior Electrical Engineer for their Huntington, New York office! Responsibilities: • Design electrical systems (power distribution, stand-by power generation, lighting, communication, fire alarm, security systems), • Manage team of electrical engineers in a variety of project design and development tasks:, • drawings, • calculations, • cost estimates, • specifications, • client communication, • contractor submittal reviews, • Review design documents, • Ensure department adheres to QA/QC standards, • Assist with developing QA/QC standards, • Assist with business development initiatives, • Mentor/train junior staff Requirements: • B.S. degree in Electrical Engineering from an accredited program, • 5+ years of consulting experience (designing building power, lighting, communication and security systems), • Experience with HVAC and plumbing systems preferred, • PE License, • Extensive knowledge of the architectural/engineering industry (Federal, State, and local laws/regulations), • Experience using Outlook and Microsoft Office (or similar software), • LEED Accreditation, • Working knowledge of AutoCAD, Revit, and Easy Power preferred Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description Civil Engineer I – Long Island & New York City Location: Long Island & New York City Employment Type: Full-time Salary: $70,000-$90,000 - Commensurate with experience About Us Our firm is a forward-thinking professional services organization with a strong legacy of delivering high-quality, innovative engineering solutions. Our expertise includes civil, structural, transportation, bridge, environmental, landscape architecture, electrical, and mechanical engineering, as well as construction inspection. We are driven by a commitment to excellence, collaboration, and continuous growth—shaping better outcomes for our clients, colleagues, and communities. Position Overview We're looking for a motivated Civil Engineer I to support a wide range of exciting civil design projects. This role offers opportunities to collaborate with experienced engineers and gain hands-on experience in developing plans, specifications, and technical solutions for infrastructure and site development projects. What You'll Do * Perform design calculations and ensure compliance with applicable codes and regulations. * Prepare and review design and construction plans, specifications, cost estimates, and permit applications. * Collaborate with engineers, CADD technicians, and other team members to deliver high-quality results. * Conduct site visits to evaluate project conditions and coordinate with stakeholders. * Draft technical reports, design documentation, and project correspondence. * Participate in client and agency meetings and professional development events. What You'll Bring * Bachelor's degree in Civil Engineering or a related field (required). * 2–4 years of experience in civil design (consulting or professional services preferred). * Engineer in Training (EIT) certification required; PE licensure preferred. * Proficiency in Civil 3D; experience with site layout, grading, and utilities design. * Familiarity with stormwater design software (HydroCAD, HEC-RAS, or SWMM) preferred. * Excellent communication, organization, and multitasking skills. * Ability to travel up to 10% (occasionally on short notice). Why You'll Love Working Here • Competitive base salary and discretionary bonus plan. Comprehensive benefits package, including multiple healthcare plan options, dental coverage, life insurance, short- and long-term disability insurance, and 401(k) with immediate match and vesting. * Paid time off: 15 vacation days, 64 hours of sick time, and 9.5 paid holidays. * Additional perks like Flexible Spending Account (FSA), Employee Assistance Program (EAP), and more. This company is an Equal Opportunity Employer. All qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a Cloud Engineer to join our IT Infrastructure & Security Department. This role will report directly to the Sr. Infrastructure & Security Engineer and is responsible for implementing, maintaining, and improving our cloud IT infrastructure, systems, and AWS environments. The Cloud Engineer will work closely with the DevOps and Product Development teams to ensure secure, scalable, and efficient cloud operations across our production and development environments. The typical base pay range for this position at the start of employment is expected to be between $120,000–$130,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Melville, NY or Columbia, MD. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Assist in researching, designing, and implementing secure, scalable, and cost-effective IT infrastructure, systems, security components, standards, and services., • Maintain, troubleshoot, and resolve issues related to infrastructure, systems, services, security, and accounts., • Continuously monitor the health and performance of the AWS infrastructure, systems, and accounts, identifying issues and implementing solutions for improved efficiency., • Analyze components, logs, services, and specific tools as needed., • Implement, enforce, and configure security policies, controls, services, identity management, and other security measures to protect from unauthorized access and cyber threats., • Stay up-to-date on technology trends and best practices, adapting to evolving cloud IT technologies and management approaches., • Communicate effectively and create accurate documentation of designs, configurations, processes, and procedures., • Collaborate closely with other team members on projects and tasks, ensuring seamless integration and support for IT initiatives., • 5+ years of experience with cloud infrastructure, systems, and security., • Minimum of 3 years of hands-on experience with AWS services., • Strong communication and collaboration skills., • Highly organized with strong analytical and problem-solving abilities., • Ability to work independently and as part of a team., • Commitment to continuous learning and delivering high-quality service. Education & Experience • Bachelor’s degree in Computer Science, Information Systems, Business Technology, or a related field—or equivalent experience., • Proficiency in IT infrastructure, networking, system administration, and security., • Solid experience with AWS services and concepts., • Experience with Infrastructure as Code (IaC) tools such as AWS CloudFormation or Terraform. RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free uniforms, • Health insurance, • Develop detailed technical drawings and specifications for retail window displays and pop ups., • Ensure that all project builds are designed with Health and Safety at the forefront of your mind., • Providing Build Drawings and CNC files., • Liaising with Project Managers on project requirements and deadlines.- Work closely with the Production Team to ensure that designs can be efficiently and accurately produced. • Conduct regular quality checks on prototypes and final products to verify accuracy and adherence to design specifications., • Participate in meetings with clients to present technical drawings and discuss project requirements. • Work closely with the design team whilst designing a project for a client. Ensuring that what is designed is achievable in project guidelines, budgets and timelines - whilst also thinking about whats best for the client., • Identify opportunities to streamline processes, improve efficiency, and enhance the overall quality of drafting work., • Proactively seek feedback and implement best practices to support ongoing learning and professional development.Qualifications: • 5+ years of experience in technical drafting for retail window displays and pop ups., • Must use SolidWorks or Inventor, • Proficiency in CAD software such as SolidWorks or Rhino., • Strong understanding of manufacturing processes and materials. • Excellent management skills with the ability to prioritize tasks and meet deadlines., • Detail-oriented mindset with a focus on quality assurance and continuous improvement.- Strong communication and interpersonal skills to collaborate effectively with cross-functional teams. • Ability to problem solve and troubleshoot technical issues as they arise., • Knowledge of health and safety regulations in the retail industry. If you have a passion for creative design and a strong technical background, we invite you to apply for this exciting opportunity to lead a dynamic team in designing innovative retail displays.

Job Description Manufacturing Engineer (Medical Device Manufacturing, Process Engineering, Continuous Improvement) About the Role: This Manufacturing Engineer position offers the opportunity to play a key role in the production of advanced medical devices and precision-engineered components. The role focuses on optimizing manufacturing processes, enhancing production efficiency, and ensuring product quality in a regulated environment. The Manufacturing Engineer will collaborate across engineering, operations, and quality teams to develop, implement, and continuously improve processes that meet industry standards and safety requirements. Responsibilities: * Design, implement, and optimize manufacturing processes to improve efficiency, quality, and safety. * Develop and validate automated and manual production systems to ensure repeatable and compliant outcomes. * Evaluate manufacturing performance using metrics such as throughput, yield, and cost efficiency. * Provide accurate cost estimates for new and existing projects, supporting pricing and resource planning. * Plan and improve factory layouts, material flow, and equipment utilization for optimal productivity. * Collaborate with cross-functional teams to troubleshoot issues, resolve production bottlenecks, and reduce waste. * Train operators and technicians on new equipment, tooling, and process updates. * Maintain compliance with ISO, FDA, and environmental health and safety standards. * Research and recommend new technologies to advance manufacturing capabilities. * Lead or assist with continuous improvement initiatives and lean manufacturing projects. Qualifications: * Minimum of 5 years of experience as a Manufacturing Engineer or in a related role within a regulated manufacturing environment. * Bachelors degree in Mechanical Engineering, Manufacturing Engineering, or a related field. * Strong knowledge of manufacturing processes, CNC machining, tooling design, and fabrication methods. * Proficiency with CAD software and Microsoft Office Suite. * Proven project management and process improvement experience. * Excellent problem-solving skills and a data-driven approach to decision-making. * Familiarity with quality systems, statistical process control, and root cause analysis. * Commitment to maintaining high safety, quality, and environmental standards. Desired Qualifications: * Green Belt or Lean Six Sigma certification. * Hands-on experience with continuous improvement methodologies and lean manufacturing tools. * Knowledge of medical device manufacturing standards and regulatory compliance. * Experience leading cross-functional teams in a fast-paced production environment. * Strong communication and collaboration skills across departments. (Must be authorized to work in the United States. Sponsorship is not available for this role.)

Job Description Senior Project Engineer – Civil (Long Island & New York City) Location: Long Island & New York City Employment Type: Full-time Salary: $115,000-$150,000- Commensurate with experience About Us Our firm is a forward-thinking professional services organization with a strong legacy of delivering high-quality, innovative engineering solutions. Our expertise includes civil, structural, transportation, bridge, environmental, landscape architecture, electrical, and mechanical engineering, as well as construction inspection. We are driven by a commitment to excellence, collaboration, and continuous growth—shaping better outcomes for our clients, colleagues, and communities. Position Overview We're seeking an experienced Senior Project Engineer – Civil to lead site development and utility infrastructure projects from concept to completion. This role combines technical expertise with project management, offering opportunities to mentor junior engineers, coordinate multidisciplinary efforts, and ensure successful project outcomes. What You'll Do * Manage all aspects of civil engineering projects—planning, design, permitting, and construction. * Lead collaboration with clients, consultants, and contractors to meet project goals. * Oversee project schedules, budgets, and resource allocation. * Ensure design compliance with all regulatory standards and best practices. * Review design plans, cost estimates, and technical specifications. * Represent LKB in client meetings and professional association events. What You'll Bring * Bachelor's degree in Civil Engineering or a related field (required). * 10–15 years of civil design experience (consulting or professional services preferred). * Professional Engineer (PE) license required. * Proven success in managing large-scale land development and infrastructure projects. * Strong leadership, organizational, and communication skills. * Proficiency in Civil 3D; familiarity with HydroCAD, HEC-RAS, or SWMM preferred. * Ability to travel up to 10% (occasionally on short notice). Why You'll Love Working Here * Competitive base salary and discretionary bonus plan. * Comprehensive benefits package, including multiple healthcare plan options, dental coverage, life insurance, disability insurance, and 401(k) with immediate match and vesting. * Paid time off: 15 vacation days, 64 hours of sick time, and 9.5 paid holidays. * Additional perks like Flexible Spending Account (FSA), Employee Assistance Program (EAP), and more. This company is an Equal Opportunity Employer committed to diversity and inclusion in the workplace.

Job DescriptionDescription This person will be responsible for overseeing the procurement of over 150 custom spun metal components we’ve designed over the years. We work closely with our trusted metal spinning and wood turning partners, and have sourced a network of US-based high-quality suppliers who are keeping their time-honored craft alive here in America! The Procurement Engineer will work closely with the Systems and Design Engineers to ensure part requirements are clearly and successfully communicated to our partners. Data for recommended order quantities and historical usage is all available on the company’s meticulously configured DDMRP (Demand Driven Materials Requirements Planning) system – Intiflow and Netsuite ERP. On top of analyzing data, sending emails and phone calls to partners, quoting parts, and submitting purchase orders – yxou will be a central point of contact for our design, engineering, scheduling, production, and receiving departments for all things related to the parts under your control. Key ResponsibilitiesYour responsibilities include: • Quote and Purchase parts – maintain all required inventory at “preferred stock levels”, • Maintain and improve vendor relationships, • Pursue new vendors, • Collaborate with Design and Engineering to understand part requirements, • Collaborate with Receiving department to assist with the quality control inspection process, • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Strong technical skills to navigate our software-based workflows