Entry level maintenance jobs in Reno, NevadaCreate job alerts

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operates and performs changeovers on the lines/equipment within required timelines and demonstrates the ability to consistently meet safety, quality and efficiency goals. Follows work instructions, standards and SOP’s for equipment set up and changeover. Identifies and resolves issues during set up and changeover., • Prepares work area at beginning of shift and cleans up work area at end of shift and/or at end of production run to ensure area is ready for next job. Cleans or sanitizes all food contact surfaces between changes of product. Ensures availability of all required materials and supplies, using the appropriate lift trucks, hand jacks and other equipment once certifications are achieved., • Operates equipment, including troubleshooting and making adjustments in accordance with established work standards. Cleans and assembles equipment according to standard operating procedures., • Conducts quality checks at regular intervals; inspects ingredients and finished product to ensure product is processed according to specifications., • Truthfully and legibly completes required paperwork, written and electric reports. (i.e. Excel, Word, PCDA, Oracle, etc.)., • Reduces downtime by assuring tasks are performed promptly, safely and efficiently., • Performs operator scheduled maintenance checklist., • Diagnoses and performs minor machine maintenance and makes any needed adjustments. Works closely with maintenance when escalation to maintenance is needed for a mechanical issue., • Submits daily report of duties performed and production quantities produced., • Identifies and submits suggestions to improve efficiencies, quality and safety., • Actively participates in root cause analysis and other plant continuous improvement initiatives. Recommends and assists with implementing continuous improvement ideas., • Complies with safety requirements, GMP requirements, and SOP’s/WI’s for work area. Packaging Area: • Conducts quality checks at regular intervals; inspects filled containers and finished product to ensure product is packaged according to specifications., • Assists coworkers set up machine and stacks, marks, packs, and transports finished product. Processing Area: • Examines product for identity and any impurities. Weighs out ingredients as listed using scales with printers and mixes ingredients, using appropriate mixing method, carefully and thoroughly., • Follows batch instructions on BPR or deviation to meet desired specification via use of reactors, blenders, mixers, fitzmill, metal detector, sifter, roller compactor, rotary press, oscillating granulator, tote tumbler, lift truck, hand jack and other equipment. Notifies supervisor, lead or R&D of any concerns with instructions on BPR or deviation., • Records all item and lot number information on production ticket. Documents and updates mix tickets and log book, ensuring that all information is written truthfully and legibly. Enters all information into computer system for tracking and accountability purposes, ensuring that all information is correct., • Lifts and places raw materials into appropriate tote or tank equipment or mixers via automatic or manual lifting. Properly labels bulk containers, mixes etc., • Keeps Quality Control and Research & Development departments informed, to ensure correct amounts of raw materials are used and to recommend improvements to existing products. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED) and six (6) months of related experience and/or training or equivalent combination of education and experience., • Prior experience operating blending/processing and/or packaging machines/equipment preferred., • Experience in a manufacturing environment, preferably food or pharmaceuticals, preferred. PERFORMANCE ABILITY Certification as a Machine Operator in one (1) to three (3) Packaging and/or Processing areas (any combination). • Processing areas: (1) Encapsulation; (2) Roller Compactor; (3) Tablet Coating; (4) Tablet Press; (5) Wet Blending; (6) Dry Blending. Fitzmill is not included., • Packaging areas: (1) Cloud; (2) Oil-1, Oil-4 and HPC (considered certification in one area); (3) Monoblock Oil (4) Powder and/or Mateer (considered certification in one area); (5) Tea; (6) Vitamin. Proven ability through certification to operate various Packaging and Processing equipment according to set standards; set up, run and adjust machines; conduct timely quality checks; perform minor machine maintenance; accurately complete paperwork; and perform sanitation and changeover of equipment. Solid knowledge of machine capabilities, manufacturing process, and ability to troubleshoot. Demonstrated ability to consistently meet quality, safety and efficiency goals. Good problem solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different work centers as business needs require. Strong teamwork skills; ability to work and communicate effectively with others; strong attention to detail skills; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. Ability to work in Packaging and Processing at both the 391 and 395 manufacturing facilities in Bloomingdale. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately complete sanitation/production paperwork. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals to understand weights and measures and to use digital and balancing scales. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Good problem solving ability. OTHER SKILLS AND ABILITIES • Basic understanding of mechanical principles; ability to troubleshoot and adjust machines., • Ability to operate hand operated electronic lifting equipment (Interthor)., • Basic computer and data entry skills required., • Ability to work a flexible schedule, including weekends to support the business. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and walk; ascend and descend stairs and ladders; use hands to finger, handle, and feel; crouch or half kneel, and reach with hands and arms. Critical demands of the position include moving pallets, moving pallet jacks, lifting and loading product, and changing over and cleaning equipment. Packaging: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. from 5 inches to 47 inches and then returning to 5 inches, • Up to 20 lbs. at 30 inches, turn 90 degrees and place at 30 inches, • Ascend and descend stairs carrying 30 lbs., • Up to 55 lbs. from floor onto side, move up to 10 ft. and then return to original position, • Push and pull of force up to 35 lbs. at 54 inch height, • Push and pull of force up to 65 lbs. at 36 inch height, • Reach up to 78 inches Processing: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. to 30 inches, turn at a 90 degree angle and place at 30 inches., • Ascend and descend steps carrying up to 35 lbs., • Up to 50 lbs. to waist height., • Up to 55 lbs. from floor onto side, move 10 ft. and then return to original position., • Push and pull up to 65 lb. force at 36 inch height, • Reach up to 78 inches WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operates and performs changeovers on the lines/equipment within required timelines and demonstrates the ability to consistently meet safety, quality and efficiency goals. Follows work instructions, standards and SOP’s for equipment set up and changeover. Identifies and resolves issues during set up and changeover., • Prepares work area at beginning of shift and cleans up work area at end of shift and/or at end of production run to ensure area is ready for next job. Cleans or sanitizes all food contact surfaces between changes of product. Ensures availability of all required materials and supplies, using the appropriate lift trucks, hand jacks and other equipment once certifications are achieved., • Operates equipment, including troubleshooting and making adjustments in accordance with established work standards. Cleans and assembles equipment according to standard operating procedures., • Conducts quality checks at regular intervals; inspects ingredients and finished product to ensure product is processed according to specifications., • Truthfully and legibly completes required paperwork, written and electric reports. (i.e. Excel, Word, PCDA, Oracle, etc.)., • Reduces downtime by assuring tasks are performed promptly, safely and efficiently., • Performs operator scheduled maintenance checklist., • Diagnoses and performs minor machine maintenance and makes any needed adjustments. Works closely with maintenance when escalation to maintenance is needed for a mechanical issue., • Submits daily report of duties performed and production quantities produced., • Identifies and submits suggestions to improve efficiencies, quality and safety., • Actively participates in root cause analysis and other plant continuous improvement initiatives. Recommends and assists with implementing continuous improvement ideas., • Complies with safety requirements, GMP requirements, and SOP’s/WI’s for work area. Packaging Area: • Conducts quality checks at regular intervals; inspects filled containers and finished product to ensure product is packaged according to specifications., • Assists coworkers set up machine and stacks, marks, packs, and transports finished product. Processing Area: • Examines product for identity and any impurities. Weighs out ingredients as listed using scales with printers and mixes ingredients, using appropriate mixing method, carefully and thoroughly., • Follows batch instructions on BPR or deviation to meet desired specification via use of reactors, blenders, mixers, fitzmill, metal detector, sifter, roller compactor, rotary press, oscillating granulator, tote tumbler, lift truck, hand jack and other equipment. Notifies supervisor, lead or R&D of any concerns with instructions on BPR or deviation., • Records all item and lot number information on production ticket. Documents and updates mix tickets and log book, ensuring that all information is written truthfully and legibly. Enters all information into computer system for tracking and accountability purposes, ensuring that all information is correct., • Lifts and places raw materials into appropriate tote or tank equipment or mixers via automatic or manual lifting. Properly labels bulk containers, mixes etc., • Keeps Quality Control and Research & Development departments informed, to ensure correct amounts of raw materials are used and to recommend improvements to existing products. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED) and six (6) months of related experience and/or training or equivalent combination of education and experience., • Prior experience operating blending/processing and/or packaging machines/equipment preferred., • Experience in a manufacturing environment, preferably food or pharmaceuticals, preferred. PERFORMANCE ABILITY Certification as a Machine Operator in one (1) to three (3) Packaging and/or Processing areas (any combination). • Processing areas: (1) Encapsulation; (2) Roller Compactor; (3) Tablet Coating; (4) Tablet Press; (5) Wet Blending; (6) Dry Blending. Fitzmill is not included., • Packaging areas: (1) Cloud; (2) Oil-1, Oil-4 and HPC (considered certification in one area); (3) Monoblock Oil (4) Powder and/or Mateer (considered certification in one area); (5) Tea; (6) Vitamin. Proven ability through certification to operate various Packaging and Processing equipment according to set standards; set up, run and adjust machines; conduct timely quality checks; perform minor machine maintenance; accurately complete paperwork; and perform sanitation and changeover of equipment. Solid knowledge of machine capabilities, manufacturing process, and ability to troubleshoot. Demonstrated ability to consistently meet quality, safety and efficiency goals. Good problem solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different work centers as business needs require. Strong teamwork skills; ability to work and communicate effectively with others; strong attention to detail skills; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. Ability to work in Packaging and Processing at both the 391 and 395 manufacturing facilities in Bloomingdale. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately complete sanitation/production paperwork. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals to understand weights and measures and to use digital and balancing scales. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Good problem solving ability. OTHER SKILLS AND ABILITIES • Basic understanding of mechanical principles; ability to troubleshoot and adjust machines., • Ability to operate hand operated electronic lifting equipment (Interthor)., • Basic computer and data entry skills required., • Ability to work a flexible schedule, including weekends to support the business. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and walk; ascend and descend stairs and ladders; use hands to finger, handle, and feel; crouch or half kneel, and reach with hands and arms. Critical demands of the position include moving pallets, moving pallet jacks, lifting and loading product, and changing over and cleaning equipment. Packaging: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. from 5 inches to 47 inches and then returning to 5 inches, • Up to 20 lbs. at 30 inches, turn 90 degrees and place at 30 inches, • Ascend and descend stairs carrying 30 lbs., • Up to 55 lbs. from floor onto side, move up to 10 ft. and then return to original position, • Push and pull of force up to 35 lbs. at 54 inch height, • Push and pull of force up to 65 lbs. at 36 inch height, • Reach up to 78 inches Processing: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. to 30 inches, turn at a 90 degree angle and place at 30 inches., • Ascend and descend steps carrying up to 35 lbs., • Up to 50 lbs. to waist height., • Up to 55 lbs. from floor onto side, move 10 ft. and then return to original position., • Push and pull up to 65 lb. force at 36 inch height, • Reach up to 78 inches WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operates and performs changeovers on the lines/equipment within required timelines and demonstrates the ability to consistently meet safety, quality and efficiency goals. Follows work instructions, standards and SOP’s for equipment set up and changeover. Identifies and resolves issues during set up and changeover., • Prepares work area at beginning of shift and cleans up work area at end of shift and/or at end of production run to ensure area is ready for next job. Cleans or sanitizes all food contact surfaces between changes of product. Ensures availability of all required materials and supplies, using the appropriate lift trucks, hand jacks and other equipment once certifications are achieved., • Operates equipment, including troubleshooting and making adjustments in accordance with established work standards. Cleans and assembles equipment according to standard operating procedures., • Conducts quality checks at regular intervals; inspects ingredients and finished product to ensure product is processed according to specifications., • Truthfully and legibly completes required paperwork, written and electric reports. (i.e. Excel, Word, PCDA, Oracle, etc.)., • Reduces downtime by assuring tasks are performed promptly, safely and efficiently., • Performs operator scheduled maintenance checklist., • Diagnoses and performs minor machine maintenance and makes any needed adjustments. Works closely with maintenance when escalation to maintenance is needed for a mechanical issue., • Submits daily report of duties performed and production quantities produced., • Identifies and submits suggestions to improve efficiencies, quality and safety., • Actively participates in root cause analysis and other plant continuous improvement initiatives. Recommends and assists with implementing continuous improvement ideas., • Complies with safety requirements, GMP requirements, and SOP’s/WI’s for work area. Packaging Area: • Conducts quality checks at regular intervals; inspects filled containers and finished product to ensure product is packaged according to specifications., • Assists coworkers set up machine and stacks, marks, packs, and transports finished product. Processing Area: • Examines product for identity and any impurities. Weighs out ingredients as listed using scales with printers and mixes ingredients, using appropriate mixing method, carefully and thoroughly., • Follows batch instructions on BPR or deviation to meet desired specification via use of reactors, blenders, mixers, fitzmill, metal detector, sifter, roller compactor, rotary press, oscillating granulator, tote tumbler, lift truck, hand jack and other equipment. Notifies supervisor, lead or R&D of any concerns with instructions on BPR or deviation., • Records all item and lot number information on production ticket. Documents and updates mix tickets and log book, ensuring that all information is written truthfully and legibly. Enters all information into computer system for tracking and accountability purposes, ensuring that all information is correct., • Lifts and places raw materials into appropriate tote or tank equipment or mixers via automatic or manual lifting. Properly labels bulk containers, mixes etc., • Keeps Quality Control and Research & Development departments informed, to ensure correct amounts of raw materials are used and to recommend improvements to existing products. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED) and six (6) months of related experience and/or training or equivalent combination of education and experience., • Prior experience operating blending/processing and/or packaging machines/equipment preferred., • Experience in a manufacturing environment, preferably food or pharmaceuticals, preferred. PERFORMANCE ABILITY Certification as a Machine Operator in one (1) to three (3) Packaging and/or Processing areas (any combination). • Processing areas: (1) Encapsulation; (2) Roller Compactor; (3) Tablet Coating; (4) Tablet Press; (5) Wet Blending; (6) Dry Blending. Fitzmill is not included., • Packaging areas: (1) Cloud; (2) Oil-1, Oil-4 and HPC (considered certification in one area); (3) Monoblock Oil (4) Powder and/or Mateer (considered certification in one area); (5) Tea; (6) Vitamin. Proven ability through certification to operate various Packaging and Processing equipment according to set standards; set up, run and adjust machines; conduct timely quality checks; perform minor machine maintenance; accurately complete paperwork; and perform sanitation and changeover of equipment. Solid knowledge of machine capabilities, manufacturing process, and ability to troubleshoot. Demonstrated ability to consistently meet quality, safety and efficiency goals. Good problem solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different work centers as business needs require. Strong teamwork skills; ability to work and communicate effectively with others; strong attention to detail skills; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. Ability to work in Packaging and Processing at both the 391 and 395 manufacturing facilities in Bloomingdale. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately complete sanitation/production paperwork. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals to understand weights and measures and to use digital and balancing scales. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Good problem solving ability. OTHER SKILLS AND ABILITIES • Basic understanding of mechanical principles; ability to troubleshoot and adjust machines., • Ability to operate hand operated electronic lifting equipment (Interthor)., • Basic computer and data entry skills required., • Ability to work a flexible schedule, including weekends to support the business. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and walk; ascend and descend stairs and ladders; use hands to finger, handle, and feel; crouch or half kneel, and reach with hands and arms. Critical demands of the position include moving pallets, moving pallet jacks, lifting and loading product, and changing over and cleaning equipment. Packaging: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. from 5 inches to 47 inches and then returning to 5 inches, • Up to 20 lbs. at 30 inches, turn 90 degrees and place at 30 inches, • Ascend and descend stairs carrying 30 lbs., • Up to 55 lbs. from floor onto side, move up to 10 ft. and then return to original position, • Push and pull of force up to 35 lbs. at 54 inch height, • Push and pull of force up to 65 lbs. at 36 inch height, • Reach up to 78 inches Processing: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. to 30 inches, turn at a 90 degree angle and place at 30 inches., • Ascend and descend steps carrying up to 35 lbs., • Up to 50 lbs. to waist height., • Up to 55 lbs. from floor onto side, move 10 ft. and then return to original position., • Push and pull up to 65 lb. force at 36 inch height, • Reach up to 78 inches WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operates and performs changeovers on the lines/equipment within required timelines and demonstrates the ability to consistently meet safety, quality and efficiency goals. Follows work instructions, standards and SOP’s for equipment set up and changeover. Identifies and resolves issues during set up and changeover., • Prepares work area at beginning of shift and cleans up work area at end of shift and/or at end of production run to ensure area is ready for next job. Cleans or sanitizes all food contact surfaces between changes of product. Ensures availability of all required materials and supplies, using the appropriate lift trucks, hand jacks and other equipment once certifications are achieved., • Operates equipment, including troubleshooting and making adjustments in accordance with established work standards. Cleans and assembles equipment according to standard operating procedures., • Conducts quality checks at regular intervals; inspects ingredients and finished product to ensure product is processed according to specifications., • Truthfully and legibly completes required paperwork, written and electric reports. (i.e. Excel, Word, PCDA, Oracle, etc.)., • Reduces downtime by assuring tasks are performed promptly, safely and efficiently., • Performs operator scheduled maintenance checklist., • Diagnoses and performs minor machine maintenance and makes any needed adjustments. Works closely with maintenance when escalation to maintenance is needed for a mechanical issue., • Submits daily report of duties performed and production quantities produced., • Identifies and submits suggestions to improve efficiencies, quality and safety., • Actively participates in root cause analysis and other plant continuous improvement initiatives. Recommends and assists with implementing continuous improvement ideas., • Complies with safety requirements, GMP requirements, and SOP’s/WI’s for work area. Packaging Area: • Conducts quality checks at regular intervals; inspects filled containers and finished product to ensure product is packaged according to specifications., • Assists coworkers set up machine and stacks, marks, packs, and transports finished product. Processing Area: • Examines product for identity and any impurities. Weighs out ingredients as listed using scales with printers and mixes ingredients, using appropriate mixing method, carefully and thoroughly., • Follows batch instructions on BPR or deviation to meet desired specification via use of reactors, blenders, mixers, fitzmill, metal detector, sifter, roller compactor, rotary press, oscillating granulator, tote tumbler, lift truck, hand jack and other equipment. Notifies supervisor, lead or R&D of any concerns with instructions on BPR or deviation., • Records all item and lot number information on production ticket. Documents and updates mix tickets and log book, ensuring that all information is written truthfully and legibly. Enters all information into computer system for tracking and accountability purposes, ensuring that all information is correct., • Lifts and places raw materials into appropriate tote or tank equipment or mixers via automatic or manual lifting. Properly labels bulk containers, mixes etc., • Keeps Quality Control and Research & Development departments informed, to ensure correct amounts of raw materials are used and to recommend improvements to existing products. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED) and six (6) months of related experience and/or training or equivalent combination of education and experience., • Prior experience operating blending/processing and/or packaging machines/equipment preferred., • Experience in a manufacturing environment, preferably food or pharmaceuticals, preferred. PERFORMANCE ABILITY Certification as a Machine Operator in one (1) to three (3) Packaging and/or Processing areas (any combination). • Processing areas: (1) Encapsulation; (2) Roller Compactor; (3) Tablet Coating; (4) Tablet Press; (5) Wet Blending; (6) Dry Blending. Fitzmill is not included., • Packaging areas: (1) Cloud; (2) Oil-1, Oil-4 and HPC (considered certification in one area); (3) Monoblock Oil (4) Powder and/or Mateer (considered certification in one area); (5) Tea; (6) Vitamin. Proven ability through certification to operate various Packaging and Processing equipment according to set standards; set up, run and adjust machines; conduct timely quality checks; perform minor machine maintenance; accurately complete paperwork; and perform sanitation and changeover of equipment. Solid knowledge of machine capabilities, manufacturing process, and ability to troubleshoot. Demonstrated ability to consistently meet quality, safety and efficiency goals. Good problem solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different work centers as business needs require. Strong teamwork skills; ability to work and communicate effectively with others; strong attention to detail skills; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. Ability to work in Packaging and Processing at both the 391 and 395 manufacturing facilities in Bloomingdale. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately complete sanitation/production paperwork. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals to understand weights and measures and to use digital and balancing scales. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Good problem solving ability. OTHER SKILLS AND ABILITIES • Basic understanding of mechanical principles; ability to troubleshoot and adjust machines., • Ability to operate hand operated electronic lifting equipment (Interthor)., • Basic computer and data entry skills required., • Ability to work a flexible schedule, including weekends to support the business. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and walk; ascend and descend stairs and ladders; use hands to finger, handle, and feel; crouch or half kneel, and reach with hands and arms. Critical demands of the position include moving pallets, moving pallet jacks, lifting and loading product, and changing over and cleaning equipment. Packaging: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. from 5 inches to 47 inches and then returning to 5 inches, • Up to 20 lbs. at 30 inches, turn 90 degrees and place at 30 inches, • Ascend and descend stairs carrying 30 lbs., • Up to 55 lbs. from floor onto side, move up to 10 ft. and then return to original position, • Push and pull of force up to 35 lbs. at 54 inch height, • Push and pull of force up to 65 lbs. at 36 inch height, • Reach up to 78 inches Processing: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. to 30 inches, turn at a 90 degree angle and place at 30 inches., • Ascend and descend steps carrying up to 35 lbs., • Up to 50 lbs. to waist height., • Up to 55 lbs. from floor onto side, move 10 ft. and then return to original position., • Push and pull up to 65 lb. force at 36 inch height, • Reach up to 78 inches WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operates and performs changeovers on the lines/equipment within required timelines and demonstrates the ability to consistently meet safety, quality and efficiency goals. Follows work instructions, standards and SOP’s for equipment set up and changeover. Identifies and resolves issues during set up and changeover., • Prepares work area at beginning of shift and cleans up work area at end of shift and/or at end of production run to ensure area is ready for next job. Cleans or sanitizes all food contact surfaces between changes of product. Ensures availability of all required materials and supplies, using the appropriate lift trucks, hand jacks and other equipment once certifications are achieved., • Operates equipment, including troubleshooting and making adjustments in accordance with established work standards. Cleans and assembles equipment according to standard operating procedures., • Conducts quality checks at regular intervals; inspects ingredients and finished product to ensure product is processed according to specifications., • Truthfully and legibly completes required paperwork, written and electric reports. (i.e. Excel, Word, PCDA, Oracle, etc.)., • Reduces downtime by assuring tasks are performed promptly, safely and efficiently., • Performs operator scheduled maintenance checklist., • Diagnoses and performs minor machine maintenance and makes any needed adjustments. Works closely with maintenance when escalation to maintenance is needed for a mechanical issue., • Submits daily report of duties performed and production quantities produced., • Identifies and submits suggestions to improve efficiencies, quality and safety., • Actively participates in root cause analysis and other plant continuous improvement initiatives. Recommends and assists with implementing continuous improvement ideas., • Complies with safety requirements, GMP requirements, and SOP’s/WI’s for work area. Packaging Area: • Conducts quality checks at regular intervals; inspects filled containers and finished product to ensure product is packaged according to specifications., • Assists coworkers set up machine and stacks, marks, packs, and transports finished product. Processing Area: • Examines product for identity and any impurities. Weighs out ingredients as listed using scales with printers and mixes ingredients, using appropriate mixing method, carefully and thoroughly., • Follows batch instructions on BPR or deviation to meet desired specification via use of reactors, blenders, mixers, fitzmill, metal detector, sifter, roller compactor, rotary press, oscillating granulator, tote tumbler, lift truck, hand jack and other equipment. Notifies supervisor, lead or R&D of any concerns with instructions on BPR or deviation., • Records all item and lot number information on production ticket. Documents and updates mix tickets and log book, ensuring that all information is written truthfully and legibly. Enters all information into computer system for tracking and accountability purposes, ensuring that all information is correct., • Lifts and places raw materials into appropriate tote or tank equipment or mixers via automatic or manual lifting. Properly labels bulk containers, mixes etc., • Keeps Quality Control and Research & Development departments informed, to ensure correct amounts of raw materials are used and to recommend improvements to existing products. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED) and six (6) months of related experience and/or training or equivalent combination of education and experience., • Prior experience operating blending/processing and/or packaging machines/equipment preferred., • Experience in a manufacturing environment, preferably food or pharmaceuticals, preferred. PERFORMANCE ABILITY Certification as a Machine Operator in one (1) to three (3) Packaging and/or Processing areas (any combination). • Processing areas: (1) Encapsulation; (2) Roller Compactor; (3) Tablet Coating; (4) Tablet Press; (5) Wet Blending; (6) Dry Blending. Fitzmill is not included., • Packaging areas: (1) Cloud; (2) Oil-1, Oil-4 and HPC (considered certification in one area); (3) Monoblock Oil (4) Powder and/or Mateer (considered certification in one area); (5) Tea; (6) Vitamin. Proven ability through certification to operate various Packaging and Processing equipment according to set standards; set up, run and adjust machines; conduct timely quality checks; perform minor machine maintenance; accurately complete paperwork; and perform sanitation and changeover of equipment. Solid knowledge of machine capabilities, manufacturing process, and ability to troubleshoot. Demonstrated ability to consistently meet quality, safety and efficiency goals. Good problem solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different work centers as business needs require. Strong teamwork skills; ability to work and communicate effectively with others; strong attention to detail skills; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. Ability to work in Packaging and Processing at both the 391 and 395 manufacturing facilities in Bloomingdale. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately complete sanitation/production paperwork. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals to understand weights and measures and to use digital and balancing scales. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Good problem solving ability. OTHER SKILLS AND ABILITIES • Basic understanding of mechanical principles; ability to troubleshoot and adjust machines., • Ability to operate hand operated electronic lifting equipment (Interthor)., • Basic computer and data entry skills required., • Ability to work a flexible schedule, including weekends to support the business. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and walk; ascend and descend stairs and ladders; use hands to finger, handle, and feel; crouch or half kneel, and reach with hands and arms. Critical demands of the position include moving pallets, moving pallet jacks, lifting and loading product, and changing over and cleaning equipment. Packaging: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. from 5 inches to 47 inches and then returning to 5 inches, • Up to 20 lbs. at 30 inches, turn 90 degrees and place at 30 inches, • Ascend and descend stairs carrying 30 lbs., • Up to 55 lbs. from floor onto side, move up to 10 ft. and then return to original position, • Push and pull of force up to 35 lbs. at 54 inch height, • Push and pull of force up to 65 lbs. at 36 inch height, • Reach up to 78 inches Processing: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. to 30 inches, turn at a 90 degree angle and place at 30 inches., • Ascend and descend steps carrying up to 35 lbs., • Up to 50 lbs. to waist height., • Up to 55 lbs. from floor onto side, move 10 ft. and then return to original position., • Push and pull up to 65 lb. force at 36 inch height, • Reach up to 78 inches WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operates and performs changeovers on the lines/equipment within required timelines and demonstrates the ability to consistently meet safety, quality and efficiency goals. Follows work instructions, standards and SOP’s for equipment set up and changeover. Identifies and resolves issues during set up and changeover., • Prepares work area at beginning of shift and cleans up work area at end of shift and/or at end of production run to ensure area is ready for next job. Cleans or sanitizes all food contact surfaces between changes of product. Ensures availability of all required materials and supplies, using the appropriate lift trucks, hand jacks and other equipment once certifications are achieved., • Operates equipment, including troubleshooting and making adjustments in accordance with established work standards. Cleans and assembles equipment according to standard operating procedures., • Conducts quality checks at regular intervals; inspects ingredients and finished product to ensure product is processed according to specifications., • Truthfully and legibly completes required paperwork, written and electric reports. (i.e. Excel, Word, PCDA, Oracle, etc.)., • Reduces downtime by assuring tasks are performed promptly, safely and efficiently., • Performs operator scheduled maintenance checklist., • Diagnoses and performs minor machine maintenance and makes any needed adjustments. Works closely with maintenance when escalation to maintenance is needed for a mechanical issue., • Submits daily report of duties performed and production quantities produced., • Identifies and submits suggestions to improve efficiencies, quality and safety., • Actively participates in root cause analysis and other plant continuous improvement initiatives. Recommends and assists with implementing continuous improvement ideas., • Complies with safety requirements, GMP requirements, and SOP’s/WI’s for work area. Packaging Area: • Conducts quality checks at regular intervals; inspects filled containers and finished product to ensure product is packaged according to specifications., • Assists coworkers set up machine and stacks, marks, packs, and transports finished product. Processing Area: • Examines product for identity and any impurities. Weighs out ingredients as listed using scales with printers and mixes ingredients, using appropriate mixing method, carefully and thoroughly., • Follows batch instructions on BPR or deviation to meet desired specification via use of reactors, blenders, mixers, fitzmill, metal detector, sifter, roller compactor, rotary press, oscillating granulator, tote tumbler, lift truck, hand jack and other equipment. Notifies supervisor, lead or R&D of any concerns with instructions on BPR or deviation., • Records all item and lot number information on production ticket. Documents and updates mix tickets and log book, ensuring that all information is written truthfully and legibly. Enters all information into computer system for tracking and accountability purposes, ensuring that all information is correct., • Lifts and places raw materials into appropriate tote or tank equipment or mixers via automatic or manual lifting. Properly labels bulk containers, mixes etc., • Keeps Quality Control and Research & Development departments informed, to ensure correct amounts of raw materials are used and to recommend improvements to existing products. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED) and six (6) months of related experience and/or training or equivalent combination of education and experience., • Prior experience operating blending/processing and/or packaging machines/equipment preferred., • Experience in a manufacturing environment, preferably food or pharmaceuticals, preferred. PERFORMANCE ABILITY Certification as a Machine Operator in one (1) to three (3) Packaging and/or Processing areas (any combination). • Processing areas: (1) Encapsulation; (2) Roller Compactor; (3) Tablet Coating; (4) Tablet Press; (5) Wet Blending; (6) Dry Blending. Fitzmill is not included., • Packaging areas: (1) Cloud; (2) Oil-1, Oil-4 and HPC (considered certification in one area); (3) Monoblock Oil (4) Powder and/or Mateer (considered certification in one area); (5) Tea; (6) Vitamin. Proven ability through certification to operate various Packaging and Processing equipment according to set standards; set up, run and adjust machines; conduct timely quality checks; perform minor machine maintenance; accurately complete paperwork; and perform sanitation and changeover of equipment. Solid knowledge of machine capabilities, manufacturing process, and ability to troubleshoot. Demonstrated ability to consistently meet quality, safety and efficiency goals. Good problem solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different work centers as business needs require. Strong teamwork skills; ability to work and communicate effectively with others; strong attention to detail skills; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. Ability to work in Packaging and Processing at both the 391 and 395 manufacturing facilities in Bloomingdale. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately complete sanitation/production paperwork. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals to understand weights and measures and to use digital and balancing scales. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Good problem solving ability. OTHER SKILLS AND ABILITIES • Basic understanding of mechanical principles; ability to troubleshoot and adjust machines., • Ability to operate hand operated electronic lifting equipment (Interthor)., • Basic computer and data entry skills required., • Ability to work a flexible schedule, including weekends to support the business. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and walk; ascend and descend stairs and ladders; use hands to finger, handle, and feel; crouch or half kneel, and reach with hands and arms. Critical demands of the position include moving pallets, moving pallet jacks, lifting and loading product, and changing over and cleaning equipment. Packaging: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. from 5 inches to 47 inches and then returning to 5 inches, • Up to 20 lbs. at 30 inches, turn 90 degrees and place at 30 inches, • Ascend and descend stairs carrying 30 lbs., • Up to 55 lbs. from floor onto side, move up to 10 ft. and then return to original position, • Push and pull of force up to 35 lbs. at 54 inch height, • Push and pull of force up to 65 lbs. at 36 inch height, • Reach up to 78 inches Processing: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. to 30 inches, turn at a 90 degree angle and place at 30 inches., • Ascend and descend steps carrying up to 35 lbs., • Up to 50 lbs. to waist height., • Up to 55 lbs. from floor onto side, move 10 ft. and then return to original position., • Push and pull up to 65 lb. force at 36 inch height, • Reach up to 78 inches WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operates and performs changeovers on the lines/equipment within required timelines and demonstrates the ability to consistently meet safety, quality and efficiency goals. Follows work instructions, standards and SOP’s for equipment set up and changeover. Identifies and resolves issues during set up and changeover., • Prepares work area at beginning of shift and cleans up work area at end of shift and/or at end of production run to ensure area is ready for next job. Cleans or sanitizes all food contact surfaces between changes of product. Ensures availability of all required materials and supplies, using the appropriate lift trucks, hand jacks and other equipment once certifications are achieved., • Operates equipment, including troubleshooting and making adjustments in accordance with established work standards. Cleans and assembles equipment according to standard operating procedures., • Conducts quality checks at regular intervals; inspects ingredients and finished product to ensure product is processed according to specifications., • Truthfully and legibly completes required paperwork, written and electric reports. (i.e. Excel, Word, PCDA, Oracle, etc.)., • Reduces downtime by assuring tasks are performed promptly, safely and efficiently., • Performs operator scheduled maintenance checklist., • Diagnoses and performs minor machine maintenance and makes any needed adjustments. Works closely with maintenance when escalation to maintenance is needed for a mechanical issue., • Submits daily report of duties performed and production quantities produced., • Identifies and submits suggestions to improve efficiencies, quality and safety., • Actively participates in root cause analysis and other plant continuous improvement initiatives. Recommends and assists with implementing continuous improvement ideas., • Complies with safety requirements, GMP requirements, and SOP’s/WI’s for work area. Packaging Area: • Conducts quality checks at regular intervals; inspects filled containers and finished product to ensure product is packaged according to specifications., • Assists coworkers set up machine and stacks, marks, packs, and transports finished product. Processing Area: • Examines product for identity and any impurities. Weighs out ingredients as listed using scales with printers and mixes ingredients, using appropriate mixing method, carefully and thoroughly., • Follows batch instructions on BPR or deviation to meet desired specification via use of reactors, blenders, mixers, fitzmill, metal detector, sifter, roller compactor, rotary press, oscillating granulator, tote tumbler, lift truck, hand jack and other equipment. Notifies supervisor, lead or R&D of any concerns with instructions on BPR or deviation., • Records all item and lot number information on production ticket. Documents and updates mix tickets and log book, ensuring that all information is written truthfully and legibly. Enters all information into computer system for tracking and accountability purposes, ensuring that all information is correct., • Lifts and places raw materials into appropriate tote or tank equipment or mixers via automatic or manual lifting. Properly labels bulk containers, mixes etc., • Keeps Quality Control and Research & Development departments informed, to ensure correct amounts of raw materials are used and to recommend improvements to existing products. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED) and six (6) months of related experience and/or training or equivalent combination of education and experience., • Prior experience operating blending/processing and/or packaging machines/equipment preferred., • Experience in a manufacturing environment, preferably food or pharmaceuticals, preferred. PERFORMANCE ABILITY Certification as a Machine Operator in one (1) to three (3) Packaging and/or Processing areas (any combination). • Processing areas: (1) Encapsulation; (2) Roller Compactor; (3) Tablet Coating; (4) Tablet Press; (5) Wet Blending; (6) Dry Blending. Fitzmill is not included., • Packaging areas: (1) Cloud; (2) Oil-1, Oil-4 and HPC (considered certification in one area); (3) Monoblock Oil (4) Powder and/or Mateer (considered certification in one area); (5) Tea; (6) Vitamin. Proven ability through certification to operate various Packaging and Processing equipment according to set standards; set up, run and adjust machines; conduct timely quality checks; perform minor machine maintenance; accurately complete paperwork; and perform sanitation and changeover of equipment. Solid knowledge of machine capabilities, manufacturing process, and ability to troubleshoot. Demonstrated ability to consistently meet quality, safety and efficiency goals. Good problem solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different work centers as business needs require. Strong teamwork skills; ability to work and communicate effectively with others; strong attention to detail skills; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. Ability to work in Packaging and Processing at both the 391 and 395 manufacturing facilities in Bloomingdale. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately complete sanitation/production paperwork. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals to understand weights and measures and to use digital and balancing scales. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Good problem solving ability. OTHER SKILLS AND ABILITIES • Basic understanding of mechanical principles; ability to troubleshoot and adjust machines., • Ability to operate hand operated electronic lifting equipment (Interthor)., • Basic computer and data entry skills required., • Ability to work a flexible schedule, including weekends to support the business. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and walk; ascend and descend stairs and ladders; use hands to finger, handle, and feel; crouch or half kneel, and reach with hands and arms. Critical demands of the position include moving pallets, moving pallet jacks, lifting and loading product, and changing over and cleaning equipment. Packaging: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. from 5 inches to 47 inches and then returning to 5 inches, • Up to 20 lbs. at 30 inches, turn 90 degrees and place at 30 inches, • Ascend and descend stairs carrying 30 lbs., • Up to 55 lbs. from floor onto side, move up to 10 ft. and then return to original position, • Push and pull of force up to 35 lbs. at 54 inch height, • Push and pull of force up to 65 lbs. at 36 inch height, • Reach up to 78 inches Processing: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. to 30 inches, turn at a 90 degree angle and place at 30 inches., • Ascend and descend steps carrying up to 35 lbs., • Up to 50 lbs. to waist height., • Up to 55 lbs. from floor onto side, move 10 ft. and then return to original position., • Push and pull up to 65 lb. force at 36 inch height, • Reach up to 78 inches WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operates and performs changeovers on the lines/equipment within required timelines and demonstrates the ability to consistently meet safety, quality and efficiency goals. Follows work instructions, standards and SOP’s for equipment set up and changeover. Identifies and resolves issues during set up and changeover., • Prepares work area at beginning of shift and cleans up work area at end of shift and/or at end of production run to ensure area is ready for next job. Cleans or sanitizes all food contact surfaces between changes of product. Ensures availability of all required materials and supplies, using the appropriate lift trucks, hand jacks and other equipment once certifications are achieved., • Operates equipment, including troubleshooting and making adjustments in accordance with established work standards. Cleans and assembles equipment according to standard operating procedures., • Conducts quality checks at regular intervals; inspects ingredients and finished product to ensure product is processed according to specifications., • Truthfully and legibly completes required paperwork, written and electric reports. (i.e. Excel, Word, PCDA, Oracle, etc.)., • Reduces downtime by assuring tasks are performed promptly, safely and efficiently., • Performs operator scheduled maintenance checklist., • Diagnoses and performs minor machine maintenance and makes any needed adjustments. Works closely with maintenance when escalation to maintenance is needed for a mechanical issue., • Submits daily report of duties performed and production quantities produced., • Identifies and submits suggestions to improve efficiencies, quality and safety., • Actively participates in root cause analysis and other plant continuous improvement initiatives. Recommends and assists with implementing continuous improvement ideas., • Complies with safety requirements, GMP requirements, and SOP’s/WI’s for work area. Packaging Area: • Conducts quality checks at regular intervals; inspects filled containers and finished product to ensure product is packaged according to specifications., • Assists coworkers set up machine and stacks, marks, packs, and transports finished product. Processing Area: • Examines product for identity and any impurities. Weighs out ingredients as listed using scales with printers and mixes ingredients, using appropriate mixing method, carefully and thoroughly., • Follows batch instructions on BPR or deviation to meet desired specification via use of reactors, blenders, mixers, fitzmill, metal detector, sifter, roller compactor, rotary press, oscillating granulator, tote tumbler, lift truck, hand jack and other equipment. Notifies supervisor, lead or R&D of any concerns with instructions on BPR or deviation., • Records all item and lot number information on production ticket. Documents and updates mix tickets and log book, ensuring that all information is written truthfully and legibly. Enters all information into computer system for tracking and accountability purposes, ensuring that all information is correct., • Lifts and places raw materials into appropriate tote or tank equipment or mixers via automatic or manual lifting. Properly labels bulk containers, mixes etc., • Keeps Quality Control and Research & Development departments informed, to ensure correct amounts of raw materials are used and to recommend improvements to existing products. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED) and six (6) months of related experience and/or training or equivalent combination of education and experience., • Prior experience operating blending/processing and/or packaging machines/equipment preferred., • Experience in a manufacturing environment, preferably food or pharmaceuticals, preferred. PERFORMANCE ABILITY Certification as a Machine Operator in one (1) to three (3) Packaging and/or Processing areas (any combination). • Processing areas: (1) Encapsulation; (2) Roller Compactor; (3) Tablet Coating; (4) Tablet Press; (5) Wet Blending; (6) Dry Blending. Fitzmill is not included., • Packaging areas: (1) Cloud; (2) Oil-1, Oil-4 and HPC (considered certification in one area); (3) Monoblock Oil (4) Powder and/or Mateer (considered certification in one area); (5) Tea; (6) Vitamin. Proven ability through certification to operate various Packaging and Processing equipment according to set standards; set up, run and adjust machines; conduct timely quality checks; perform minor machine maintenance; accurately complete paperwork; and perform sanitation and changeover of equipment. Solid knowledge of machine capabilities, manufacturing process, and ability to troubleshoot. Demonstrated ability to consistently meet quality, safety and efficiency goals. Good problem solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different work centers as business needs require. Strong teamwork skills; ability to work and communicate effectively with others; strong attention to detail skills; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. Ability to work in Packaging and Processing at both the 391 and 395 manufacturing facilities in Bloomingdale. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately complete sanitation/production paperwork. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals to understand weights and measures and to use digital and balancing scales. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Good problem solving ability. OTHER SKILLS AND ABILITIES • Basic understanding of mechanical principles; ability to troubleshoot and adjust machines., • Ability to operate hand operated electronic lifting equipment (Interthor)., • Basic computer and data entry skills required., • Ability to work a flexible schedule, including weekends to support the business. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and walk; ascend and descend stairs and ladders; use hands to finger, handle, and feel; crouch or half kneel, and reach with hands and arms. Critical demands of the position include moving pallets, moving pallet jacks, lifting and loading product, and changing over and cleaning equipment. Packaging: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. from 5 inches to 47 inches and then returning to 5 inches, • Up to 20 lbs. at 30 inches, turn 90 degrees and place at 30 inches, • Ascend and descend stairs carrying 30 lbs., • Up to 55 lbs. from floor onto side, move up to 10 ft. and then return to original position, • Push and pull of force up to 35 lbs. at 54 inch height, • Push and pull of force up to 65 lbs. at 36 inch height, • Reach up to 78 inches Processing: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. to 30 inches, turn at a 90 degree angle and place at 30 inches., • Ascend and descend steps carrying up to 35 lbs., • Up to 50 lbs. to waist height., • Up to 55 lbs. from floor onto side, move 10 ft. and then return to original position., • Push and pull up to 65 lb. force at 36 inch height, • Reach up to 78 inches WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operates and performs changeovers on the lines/equipment within required timelines and demonstrates the ability to consistently meet safety, quality and efficiency goals. Follows work instructions, standards and SOP’s for equipment set up and changeover. Identifies and resolves issues during set up and changeover., • Prepares work area at beginning of shift and cleans up work area at end of shift and/or at end of production run to ensure area is ready for next job. Cleans or sanitizes all food contact surfaces between changes of product. Ensures availability of all required materials and supplies, using the appropriate lift trucks, hand jacks and other equipment once certifications are achieved., • Operates equipment, including troubleshooting and making adjustments in accordance with established work standards. Cleans and assembles equipment according to standard operating procedures., • Conducts quality checks at regular intervals; inspects ingredients and finished product to ensure product is processed according to specifications., • Truthfully and legibly completes required paperwork, written and electric reports. (i.e. Excel, Word, PCDA, Oracle, etc.)., • Reduces downtime by assuring tasks are performed promptly, safely and efficiently., • Performs operator scheduled maintenance checklist., • Diagnoses and performs minor machine maintenance and makes any needed adjustments. Works closely with maintenance when escalation to maintenance is needed for a mechanical issue., • Submits daily report of duties performed and production quantities produced., • Identifies and submits suggestions to improve efficiencies, quality and safety., • Actively participates in root cause analysis and other plant continuous improvement initiatives. Recommends and assists with implementing continuous improvement ideas., • Complies with safety requirements, GMP requirements, and SOP’s/WI’s for work area. Packaging Area: • Conducts quality checks at regular intervals; inspects filled containers and finished product to ensure product is packaged according to specifications., • Assists coworkers set up machine and stacks, marks, packs, and transports finished product. Processing Area: • Examines product for identity and any impurities. Weighs out ingredients as listed using scales with printers and mixes ingredients, using appropriate mixing method, carefully and thoroughly., • Follows batch instructions on BPR or deviation to meet desired specification via use of reactors, blenders, mixers, fitzmill, metal detector, sifter, roller compactor, rotary press, oscillating granulator, tote tumbler, lift truck, hand jack and other equipment. Notifies supervisor, lead or R&D of any concerns with instructions on BPR or deviation., • Records all item and lot number information on production ticket. Documents and updates mix tickets and log book, ensuring that all information is written truthfully and legibly. Enters all information into computer system for tracking and accountability purposes, ensuring that all information is correct., • Lifts and places raw materials into appropriate tote or tank equipment or mixers via automatic or manual lifting. Properly labels bulk containers, mixes etc., • Keeps Quality Control and Research & Development departments informed, to ensure correct amounts of raw materials are used and to recommend improvements to existing products. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED) and six (6) months of related experience and/or training or equivalent combination of education and experience., • Prior experience operating blending/processing and/or packaging machines/equipment preferred., • Experience in a manufacturing environment, preferably food or pharmaceuticals, preferred. PERFORMANCE ABILITY Certification as a Machine Operator in one (1) to three (3) Packaging and/or Processing areas (any combination). • Processing areas: (1) Encapsulation; (2) Roller Compactor; (3) Tablet Coating; (4) Tablet Press; (5) Wet Blending; (6) Dry Blending. Fitzmill is not included., • Packaging areas: (1) Cloud; (2) Oil-1, Oil-4 and HPC (considered certification in one area); (3) Monoblock Oil (4) Powder and/or Mateer (considered certification in one area); (5) Tea; (6) Vitamin. Proven ability through certification to operate various Packaging and Processing equipment according to set standards; set up, run and adjust machines; conduct timely quality checks; perform minor machine maintenance; accurately complete paperwork; and perform sanitation and changeover of equipment. Solid knowledge of machine capabilities, manufacturing process, and ability to troubleshoot. Demonstrated ability to consistently meet quality, safety and efficiency goals. Good problem solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different work centers as business needs require. Strong teamwork skills; ability to work and communicate effectively with others; strong attention to detail skills; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. Ability to work in Packaging and Processing at both the 391 and 395 manufacturing facilities in Bloomingdale. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately complete sanitation/production paperwork. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals to understand weights and measures and to use digital and balancing scales. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Good problem solving ability. OTHER SKILLS AND ABILITIES • Basic understanding of mechanical principles; ability to troubleshoot and adjust machines., • Ability to operate hand operated electronic lifting equipment (Interthor)., • Basic computer and data entry skills required., • Ability to work a flexible schedule, including weekends to support the business. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and walk; ascend and descend stairs and ladders; use hands to finger, handle, and feel; crouch or half kneel, and reach with hands and arms. Critical demands of the position include moving pallets, moving pallet jacks, lifting and loading product, and changing over and cleaning equipment. Packaging: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. from 5 inches to 47 inches and then returning to 5 inches, • Up to 20 lbs. at 30 inches, turn 90 degrees and place at 30 inches, • Ascend and descend stairs carrying 30 lbs., • Up to 55 lbs. from floor onto side, move up to 10 ft. and then return to original position, • Push and pull of force up to 35 lbs. at 54 inch height, • Push and pull of force up to 65 lbs. at 36 inch height, • Reach up to 78 inches Processing: The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 20 lbs. to 30 inches, turn at a 90 degree angle and place at 30 inches., • Ascend and descend steps carrying up to 35 lbs., • Up to 50 lbs. to waist height., • Up to 55 lbs. from floor onto side, move 10 ft. and then return to original position., • Push and pull up to 65 lb. force at 36 inch height, • Reach up to 78 inches WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Our purpose is sustaining energy and water for life, and it is demonstrated in everything we do as a business, and as an employee team. At Liberty, we hire passionate people who care about doing the right thing for our customers. We are entrepreneurial, creative, and outcome-focused. Here, your natural talent and achievements will flourish in an inclusive environment of teamwork, trust and continuous learning. We are always pursuing excellence to exceed our ambitions goals, rewarding both the goal outcome and how we achieve it. Purpose This position is responsible for providing tactical support to implement, monitor and improve Liberty’s EHS management system consisting of policies, procedures, standards, programs, providing training, tools and techniques with the assigned Operations scope, including activities to ensure employee engagement and education, regulatory compliance, hazard identification and control for the assigned Operations scope. The incumbent will be responsible for leading the continuous development of the health and safety culture and positively impacting employee engagement within the assigned scope, through collaboration with local leadership and with the surrounding EHS Team. This position will be responsible for supporting improvements in our EHS risk assessment and risk mitigation process through collaboration with local leadership. The incumbent should have a foundational knowledge of occupational health, safety and environmental regulations and management systems and work with other internal stakeholders to ensure proper functionality and use of such programs with a view to compliance and a commitment to an illness and injury-free workplace. Accountabilities • Tracking of training records for EHS training and maintenance of EHS curriculums in collaboration with Safety Assistant (PTE) the Learning and Development group., • Provide Gensuite technical support and training as needed to ensure daily optimal function of the Gensuite system, • Lead ground-level collaboration with assigned Operations scope for buy-in, understanding, implementation of Liberty EHS policies, procedures, programs and compliance with regulatory requirements, EHS initiatives, critical tasks, and potential areas of opportunity to operationalize safety within local operating procedures and work practices, job-specific, modality-specific, etc., • Coordinate and support hazard identification, risk assessments, JHA, job briefing/planning activities through regular ongoing field crew visits to support proactive observations, coaching and exchange of ideas for safe work practices, • Maintain a level of knowledge of current and emerging legislations, regulations, and trends related to EHS, • Support the updating of Liberty EHS standards, policies, and procedures as needed, • Support coordination and response for planned and unplanned EHS regulatory events, such as but not limited to: requests for information, inspections, complaints, and correspondence from governing bodies (OSHA, DOT, PUC, etc.) as assigned, • Support ongoing monitoring of EHS compliance across the assigned scope and work in collaboration with the business units to resolve deficiencies, prioritize operations and capital spending related to EHS compliance, • Perform and support field/task, facility/site, equipment inspections and calibrations as required, • Actively participate and support emergency and storm response efforts for mutual aid, unplanned events, avalanche/wildfire events, crisis management, etc., • Triage and manage employee injury and illness incidents and claims in collaboration with employees, people leaders, HR, and worker’s compensation third-party representatives, • Facilitate root cause analysis and event learning of all incidents in the assigned scope, in collaboration with local leadership, appropriate with the energy-level and potential risk exposure., • Support development and distribution of EHS communications specific and applicable to the scope/work group supported (flash reports, safety bulletins), • Support and actively participate in assigned scope EHS committees (responsibility may vary depending on representation and existing processes), Operational Excellence Committees, Tool/PPE committees, etc., • Record, track, trend and develop action plans for leading and lagging EHS indicators, • Support and actively participate with the EHS team on projects, • Adequate computer skills for incident report and exchange of information for lessons learned (Microsoft Suite, Gensuite[LM1.1]), • Creating of reports outlining incident metrics and trend analysis to identify high-risk focus areas for improvement. Education and Experience • 5-10 years of field experience at an electric operations role is an asset., • Experience in the field of (but not limited to) Incident Investigation, Behavior Based Safety, Lock-Out/Tago-Out, Electrical Safety, Confined Space Entry, workplace inspections, safety meetings, procedure compilation, etc., is an asset, • Good understanding of and experience working with EHS regulations (both Canadian and US), • Good organizational and multi-tasking skills, • Good interpersonal skills, including the ability to work with and communicate with people at all levels of the organization, • Excellent computer skills (Microsoft Suite, Gensuite, Adobe Acrobat, Publisher) Applications such as ISN, Gensuite, MSDS Online will be learned on the job. Full base salary range $105,000.00- $145,000.00 per year*Liberty considers several factors when extending an offer, including but not limited to, the role and responsibilities, a candidate's work experience, education, training and skills, and geographic location. Algonquin Power & Utilities Corp. is a growing renewable energy and utility company with over $15 billion of assets across North America and internationally. For more than 30 years, Algonquin has demonstrated an unwavering commitment to delivering clean energy and water solutions. Our rapid growth has led both our regulated utility services and renewable energy business groups into different geographies and commodities, but our purpose remains unchanged – Sustaining Energy and Water for Life. Through our operating business (Liberty), we provide regulated electricity, water, and natural gas utility services to over 1 million customer connections, primarily in North America. And, our growing portfolio of clean, renewable wind, solar, hydro and thermal power generation facilities represent over 3 GW of renewable generation capacity in operation and under construction. With our robust, diversified, and growing presence in communities across North America and internationally, we are continually demonstrating our “Think Global, Act Local” business model. What we offer Company funded Pension program 401k with Company match Full insurance benefits (health/dental/vision/life) Collaborative environment with a genuine flexible working policy Share purchase/match plan Defined Contribution savings plan Top Talent Program Volunteer paid days off Employee Assistance Program Achievement fund We are focused on building a diverse and inclusive workforce. If you are excited about this role and are not certain you meet the all the qualification requirements, we encourage you to apply to further investigate the opportunity. We are an equal opportunity employer and value each person’s unique background, diversity, experiences, perspectives and talents. Full participation of all employees in a safe, healthy and respectful environment is key to individual and company success. We are committed to fully utilizing the abilities of all of our employees and expect each of our employees to honor this commitment in their daily responsibilities.

Job Description WE ARE GROWING! United Nissan is seeking a Lube Technician to join our award winning team! Be a part of one of the most successful Nissan dealerships in the United States! PURPOSE: Requires the ability to perform light maintenance and repairs, which include lube, oil, and filter changes, balancing and rotation of tires, and flushing cooling systems and is an entry-level position. ESSENTIAL DUTIES: • Performs work outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Sells lubrication, safety inspection, and other related services. Maintains related records on regular customers, following up periodically with telephone, mail, or personal reminders, in conjunction with the CRC Department., • Checks tire pressure and adds air if needed., • Communicates with parts department to obtain needed parts., • Saves and tags parts of the job if under warranty or if requested by the customer., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Communicates with the service advisor immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time., • Documents all work performed and recommended on the repair order., • Road tests vehicles., • Participates in dealership, and manufacturer-sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Inspects and test drives newly delivered vehicles for obvious damage, missing major components, and drivability functions., • Reports machinery defects or malfunctions to supervisor., • Ensures that customers’ cars are kept clean (NO SMOKING IN ANY VEHICLE!). Notifies service advisor immediately of anything that has happened to change the appearance or condition of the vehicle., • Keeps assigned shop area neat and clean., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in same condition as they were received., • Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-To- Know, etc., • Operates all tools and equipment in a safe manner., • Reports any safety issues immediately to supervisor., • Visually inspect the vehicle for damage and missing component parts, and immediately report any damage or lost items to management, • Complete the Vehicle Inspection Report, and communicate the findings to managements and/or the customer., • Perform all repairs and services indicated on the Vehicle Inspection Report and the Repair Estimate. If additional needed repairs and services are discovered, immediately communicate that information to management., • Visually inspect all tire and wheel assemblies for damage or safety issues; repair all tires from the inside using proper procedures; and report any tire or tube which has been run flat, or which has any damage that would render it unsafe., • Maintain all personal and company-provided tools and equipment in proper operating condition and report missing or damaged tools and equipment to management., • Share, recommend, and suggest products, services, equipment or practices which will improve sales, safety, efficiency, or customer satisfaction.

Job Description About Company 1 Click Logistics, founded in 2018, is a third-party logistics (3PL) provider committed to delivering exceptional service in distribution, warehousing, transportation, and innovative logistics solutions. With locations in Sparks, Nevada; Sacramento, California; Dayton, Ohio; and Hagerstown, Maryland, we are strategically positioned to serve customers across the U.S. Our mission is to serve our customers, team, and community while fostering a unique, employee-centered culture. Our comprehensive services include warehousing and distribution, retail and e-commerce fulfillment, and transportation management, all designed to streamline operations and reduce costs for our customers. We also provide value-added services, such as re-packaging, labeling, and light assembly, to meet specific customer needs. Utilizing advanced technology, our web-based Warehouse Management System (WMS) and integrated Electronic Data Interchange (EDI) connect seamlessly with major retailers, ensuring transparent and efficient operations. Our ability to serve some of the world’s largest retailers, including Walmart, Target, Costco, and Home Depot, reflects our commitment to quality and efficiency. At 1 Click Logistics, we prioritize our employees’ well-being, fostering a supportive and inclusive work environment that empowers our team to provide the exceptional service our customers expect and contribute positively to our community. Job Summary The Software Engineer I is an essential member of the Software Development team, responsible for assisting in the design, development, and maintenance of software applications. This entry to junior level role focuses on writing clean code, learning modern integration methodologies, and supporting the seamless flow of data between systems. Working primarily with ColdFusion and React, this role supports building and debugging applications that drive business operations. This position is ideal for a detail-oriented developer who is eager to grow technical skills in a collaborative, software centric environment. Duties and Responsibilities • Development Support: Write and maintain clean, scalable code using ColdFusion, React, and various frontend frameworks., • API & Integrations: Assist in creating and configuring system integrations using APIs, webhooks, and automated data exports., • Maintenance & Debugging: Revise, update, and refactor existing code to improve functionality and fix bugs., • Frontend Implementation: Develop and enhance user interfaces for nationwide enterprise applications using HTML, CSS, and JavaScript., • Performance Monitoring: Monitor application logs and system health to ensure high availability and performance., • Data Handling: Execute basic database tasks and queries using MySQL resources., • Automation: Monitor automation scripts to ensure successful execution and apply fixes under the guidance of senior engineers., • Documentation: Assist in creating and updating technical documentation and user guides., • Technical Support: Collaborate with the Customer Service Team to troubleshoot application-level issues and identify root causes., • Version Control: Use Git and ticket tracking software (e.g., Jira) to manage code changes and daily tasks., • Performs other duties as assigned.Required Skills and Abilities, • Foundational Tech: Experience with HTML5, CSS3, and JavaScript (ES6)., • Frameworks: Familiarity with React, Bootstrap, or jQuery., • Backend Exposure: Some experience or educational background in ColdFusion (training provided) and MySQL., • Data Formats: Basic understanding of XML, JSON, and CSV data structures., • Problem Solving: Strong analytical skills and a desire to learn complex system logic., • Collaboration: Excellent verbal and written communication skills for effective teamwork., • Organization: Extreme attention to detail and the ability to manage multiple small tasks simultaneously., • Adaptability: A customer service-oriented mindset with a strong work ethic and a desire for professional growth.Education and Experience, • Bachelor’s degree in Computer Science, Information Systems, or a related field (or 3 years of equivalent professional experience)., • 1–2 years of professional Web and Application Development experience preferred (internships count)., • Technical Requirements:, • JavaScript: 1–2 years., • CSS: 1–2 years., • APIs: 1–2 years., • Backend: 1+ year preferred., • Familiarity with AWS or Azure cloud environments preferred.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift 25 pounds at times. 1 Click Logistics is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description POSITION SUMMARY The Lift Mechanic II adds expertise in providing support to the Lift Maintenance department to ensure that the ski lifts are operating in a safe and efficient manner. EDUCATION / EXPERIENCE/ SKILLS AND ABILITY REQUIREMENTS • Must be at least 18 years of age., • Must possess a valid drivers’ license., • Must have knowledge and experience in the operation of fixed and detachable lift systems., • Must have knowledge of safety requirements and procedures., • Must know basics of electrical/ electronics systems, mechanical systems, pneumatic systems, hydraulic systems and control systems., • Knowledge of pre-operational maintenance checklist., • Training and experience on the safe operation of a snowmobile., • Training and experience in the safe operation of heavy equipment., • Knowledge of harness and lanyard use in climbing., • Ability to troubleshoot controls on fixed grip and detachable installations., • Basic alignment skills., • Ability to change sheaves on all lifts., • Knowledge of A.C. – D.C. voltage., • Excellent English communication skills – both written and verbal., • Excellent customer service and organizational skills., • Ability to work under pressure, multi-task and prioritize tasks. CONTACTS INTERNAL: Lift Operations staff, Vehicle Maintenance staff, Grooming staff EXTERNAL: Resort Customers ESSENTIAL DUTIES & RESPONSIBILITIES o Performs all pre-operational checks for lift clearance in the morning o Responsible for filling out pre-operational logs. o Monitors terminals and lines during operation. o Shuts down lift at the end of the business day o Reports data to supervisor. o Operation of APU on all lifts. o Level 2 entry code into control logic screens on detachable lifts. o Operation of computer on pils system for Lakeview lift. o Performs various aspects of summer maintenance. MARGINAL DUTIES & RESPONSIBILITIES o Coordinate and cooperate with other departments as necessary in the completion of the above essential duties. o Provide information and answer questions about the resort to resort guests. o Any other duties that may contribute to the cleanliness, orderliness and overall efficiency of the entire operation and all of the tasks contained therein.

Job Description JOB SUMMARY The Department of Public Works (DPW) Fuel Accounts Manager will share responsibility for educating the community on safe fueling and fuel storage practices on-playa. They will oversee accounts registration at Hell Station on-playa (and occasionally from the Artery or DMV locations as needed). They will lead the Registration Desk team in collecting all necessary information needed to finish setting up accounts including verifying the identities of leads and notifying Mobile Ops to dispatch DPW Field Agents to register assets for fueling. This role will collaborate with the DPW Finance and Records Lead who processes the accounting for all fuel and affiliated products distributed through the Fuel Department, and is responsible for account review pre-season. This temporary, ineligible for benefits role is: • From August - September: Full-Time, Exempt, based on-site out of Black Rock City, Nevada. The deadline to apply for this role is 5:00pm Pacific on June 15th. DUTIES & ESSENTIAL JOB FUNCTIONS Daily Operations (30%) • Accurately set up accounts for all users to ensure that tracking is done properly., • Collaborate and communicate daily with relevant Burning Man Departments, Crew Managers, and Vendors, • Maintain and ensure that educational PETROL materials are available to the DMV, Art Support Services (ASS), Placement, and other teams as needed on Playa; be available for training and questions as requested., • Proactively attend meetings and create reports to keep the DPW Fuel Department Manager informed of progress and areas of concern., • Effectively address fuel safety concerns with BRC Theme Camp Managers and Artist participants in collaboration with the DPW Fuel Department Manager and DPW Fuel Mobile Operations Manager. Documentation and Tracking (30%) • Maintain continuity in documentation, reports, and tracking standards outlined by the DPW Utilities Superintendent., • Manage and collaborate on documentation on participant account statuses throughout the season. Update records for problem users in shared documents., • Keep a basic inventory of all materials. Inventory must be submitted at the end of the postseason., • Work with Google products (Gmail, Docs, Sheets, Drive), Microsoft Word and Excel, and any additional online tools, technology, or applications specific to this role as required., • Commit to improving and updating Standard Operating Procedures (SOP) for this role and crew operations throughout the season for accuracy., • Prepare written feedback for the DPW Utilities Manager describing the successes of the season, areas in need of improvement, and suggestions with the purpose of improved overall efficiency for the next year; Submit an end-of-season EMBER Report. Team Management and Support (25%) • Tactfully manage the DPW Fuel Accounts team of paid and volunteer staff. Reassign and redirect workflow using education, empowerment, and delegation when appropriate or necessary, monitoring team morale and setting manageable work expectations., • Proactively take the lead on the training of crew members under the chain of command., • Review and teach the BRC Rain Contingency Plan, Fuel Spill Response Plan, Burning Man Integrated Plan, and emergency response plans; understand when to execute each with your team., • Create and actively manage staff work schedules, and log and report crew work hours by established deadlines weekly., • Attend and support crew attendance to daily Team Meetings and DPW Morning Meetings as relevant; Assist in running daily meetings for Hell Station Crew and maintain related correspondence., • Oversee activity of DPW Fuel Accounts Lead as they assist with Participant account communications., • Oversee the payment processing by the DPW Fuel Finance and Records Lead and assist with communications with account holders to resolve payment issues. Community Relations (10%) • Maintain clear and respectful communication with the DPW Fuel Team, BRC Departments, Vendors, Participants, and Artists., • Escalate any concerns to DPW Fuel Depot Operations Management or the DPW Fuel Department Manager as appropriate., • Observe safe data-handling practices, and prioritize protecting account holders’ personal and financial information according to PCI Compliance and department standards. Other Functions and Responsibilities (5%) • Work with the Fuel Crew to plan and execute LNT and Waste disposal plans., • Maintain budget awareness: monies spent, current balance, anticipated costs etc. Proactively discuss any potential adjustments or concerns with Management as soon as possible., • Help to establish and oversee the maintenance of a clean and safe worksite; ensure that all team members are provided with the necessary OSHA approved safety equipment., • Read, understand, and abide by the rules and codes of conduct according to the Burning Man Staff policies, protocols, and behavioral standards., • Monitor personal well-being, be aware of work expectations while also setting realistic boundaries, and proactively address any concerns with management., • Perform various other duties as assigned by DPW Fuel Management. LEARNING AND TEACHING • Documentation - Drives the creation, publishing, and maintenance of process documentation related to assigned duties., • Teaching – Takes a leadership role in the acculturation and training of staff. Teaches live or e-learning classes, as requested. Promotes a culture of teaching and learning throughout the community., • Mentoring - Mentors subordinates in acquiring the knowledge, skills, and experience that will allow them to advance in the organization. Aids, encourages, and inspires their team., • Training development - Collaborates with the education team to develop training materials in their area of expertise, as requested., • Learning – Pursues ongoing learning in their area of expertise, working to stay current on emergent knowledge, skills, and processes. Participates in conferences, forums, and networking events, where appropriate., • Speaking – Represents Burning Man as a subject matter expert and culture-bearer, as requested. QUALIFICATIONS Required • Able and willing to follow standards set in necessary training that can be provided on-site., • Working knowledge of OSHA-compliant personal protection equipment, first aid kits, and fire extinguishers., • Must have been to Burning Man and be familiar with the event worksite, Black Rock City and its departments., • Capable of climbing a ladder and safely traversing the top of the fuel storage tanks; Able to drive safely and navigate Black Rock City streets that are congested with pedestrians, bicycles, and mutant vehicles., • Understanding of event production timelines, budgeting and inventory maintenance, and working with integrated plans., • Proficient at navigating digital and online technology; Able to proactively engage in advanced learning, and effectively update existing online applications, tools, systems, spreadsheets, and documents., • Expert in handling data entry with attention to accuracy; highly organized, able to prioritize, and motivated with the ability to adhere to a strict schedule., • Work with Google products (Gmail, Docs, Sheets, Drive), Microsoft Word and Excel, and any additional online tools, technology, or applications specific to this role as required., • Able to maintain consistent organization and tidiness in the work environment and in handling important information (ie, tracking, personnel data, goals and timelines, payroll, etc.), • Clear, service-oriented, and professional communication, verbally and written. Experienced with using 2-way radios and following radio protocol., • Able to embody present and responsive leadership qualities for a diverse team while maintaining firm boundaries and adhering to set standards; Operates with a high level of behavioral integrity and reliability., • Effectively manages own time, the time of individual team members, and the efforts of the team as a whole., • Able to integrate feedback into action, remain calm and focused under pressure or emergency situations, and maintain a professional demeanor that leads by example., • Capable of working in an extreme environment including drastic temperature changes, high winds, poor air quality, and low to no visibility at times., • Ability to temporarily relocate for work at the Burning Man event held in Gerlach, Nevada. Preferred • OSHA 10 Certification (May be acquired through in-house training), • Experience supervising major projects in remote wilderness and/or desert environments., • First-aid knowledge. Note: If you have gained the necessary experience to succeed in this role and have acquired this experience in other ways, we encourage you to apply and share all relevant experience in your application. REQUIRED LICENSES/CERTIFICATIONS • Point-of-sale PCI Compliance Training. (available in-house), • Must have a valid Driver’s License and a good driving record. COMPENSATION Individual compensation decisions are dependent on a variety of factors, including prior experience and geographical location. The anticipated rate for this position: • From August - September is $1250 to $1400 per week. PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • Off-playa: Work is primarily sedentary in nature, no special demands are required., • On-playa: This position requires periods of heavy lifting, bending, kneeling, squatting, and climbing. This position will be physically demanding, and requires individuals with good physical health, and endurance. Work will include the need to find and meet with department representatives who may not be in the vicinity therefore this could include walking or using some form of transportation. Much of the work will be in outside weather conditions and will be exposed to fumes or airborne particles as well as possible extremes in temperature. NOTICE FOR ALL APPLICANTS: • Burning Man Project celebrates the importance of creating a diverse environment and enthusiastically encourages Black, Indigenous, Peoples of Color, LGBTQIA+, Immigrant, women, and people with disabilities, of all ages, to apply., • Burning Man Project provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training., • Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Powered by JazzHR wb5dfaXrxW

Job DescriptionDescription: The Human Resources Operations Manager supports the HR Director in leading and executing human resources initiatives within a fast-growing organization, with a primary focus on employee relations, leave management, workers’ compensation, and ADA compliance. This role is responsible for administering and coordinating all aspects of employee leave programs, workplace accommodations, and workers’ compensation claims while ensuring compliance with federal, state, and local employment laws. This role serves as a strategic and operational partner providing day-to-day HR support across multiple locations. The ideal candidate brings strong expertise in employee relations, employment law compliance, leave administration (FMLA, ADA, workers’ compensation, and state leave laws), performance management, and HR operations. This position is highly collaborative and requires a proactive HR Professional who can balance tactical execution with strategic partnership. Incumbent will help foster a positive, inclusive, compliant, and high-performing workplace culture while supporting employees and managers through all stages of the employee lifecycle. Why SendCutSend? SendCutSend is an on-demand manufacturing company specializing in custom sheet metal and CNC machining. We serve more than 150,000 engineers, fabricators, and businesses across the U.S. and Canada. We operate out of six facilities located in Nevada, Kentucky, and Texas. Our business is built on reliability, accountability, quality, and constant improvement. Everyone here plays a real role in our success. We value people who are collaborative, innovative, and committed to detailed high-quality work. We’re scaling fast and building the future of manufacturing. If you’re excited to join the team and grow with us, we want to hear from you! What you’ll do • Partner with the HR Director to develop and execute HR strategies, workforce planning, organizational design, talent development, and retention initiatives that support organizational growth and evolving business needs., • Manage day-to-day HR operations, ensuring compliance, consistency, scalability, and operational excellence across all people processes, systems, records management, reporting, and documentation., • Lead and coordinate employee lifecycle activities, including onboarding, offboarding, new hire integration, promotions, transfers, status changes, and terminations., • Serve as a trusted advisor to managers and employees on employee relations, performance management, coaching, conflict resolution, corrective actions, investigations, and complex workplace issues while ensuring fairness, consistency, and compliance., • Administer employee leave programs, including FMLA, ADA accommodations, workers’ compensation, parental leave, and state/local leave requirements, while maintaining accurate documentation, records, and reporting., • Partner with employees and managers through the interactive ADA accommodation process and provide guidance on leave administration and workplace accommodations., • Participate in the development, implementation, and maintenance of HR policies, procedures, programs, and practices that align with company culture, business objectives, and employment law requirements., • Ensure compliance with federal, state, and local employment laws and regulations, providing guidance and training to managers on employee relations, accommodations, leave administration, and compliance best practices., • Facilitate employee benefits administration by serving as a liaison between employees and third-party administrators, assisting with enrollments, changes, employee education, and benefit-related inquiries., • Support payroll coordination and ensure accuracy of employee status changes, leave tracking, benefits deductions, and related HR transactions., • Analyze HR metrics and workforce data, including turnover, absenteeism, leave trends, and employee relations data, to identify trends, provide insights, and support strategic decision-making., • Drive employee engagement, recognition, culture-building, performance management, compensation review, career development, and learning and development initiatives., • Collaborate with leadership to support change management, organizational restructuring, workforce growth, and employee retention efforts., • Promote workplace safety, return-to-work programs, injury prevention efforts, and a safe and positive work environment., • Identify opportunities to improve HR processes through automation, efficiency enhancements., • Maintain strict confidentiality and professionalism while handling sensitive employee and organizational information., • Provide cross-functional HR support and contribute to special projects and initiatives as needed. Minimum Qualifications • Bachelor’s degree in Human Resources, Business Administration, or a related field (or equivalent combination of education and experience)., • 7+ years of progressive HR experience in an HR Generalist, HR Manager, People Operations, or similar role, preferably within a manufacturing, technology, or fast-paced corporate environment., • Strong working knowledge of:, • FMLA, • ADA accommodations and interactive process, • Workers’ compensation, • Federal, state, and local employment laws, • Employee relations best practices, • Experience supporting employee relations matters and various types of leaves., • Strong analytical and problem-solving skills., • Excellent written and verbal communication skills with strong attention to detail., • Ability to maintain confidentiality and exercise sound judgment in sensitive situations., • Ability to manage multiple priorities simultaneously in a fast-paced environment., • Ability to effectively handle a broad range of interpersonal contacts, including those at a higher level and those sensitive in nature., • Strong interpersonal skills with the ability to build trust and collaborate across all levels of the organization. Preferred Qualifications • Proficiency in Google Workspace (Google Docs, Sheets, Gmail, etc.)., • Experience supporting manufacturing, plant, or multi-shift operations., • Experience with employee engagement initiatives., • Strong data entry skills with high accuracy., • PHR or SPHR certification preferred., • Experience with Paylocity. Essential Physical Requirements • Ability to sit or stand for extended periods while performing work duties., • Ability to operate standard office equipment, including computers, phones, and printers. Work Environment • Environment is a fast-paced, collaborative environment that requires communication, organization, and coordination across teams in the organization., • Work is primarily performed in an office environment within a manufacturing facility. The role may require interaction with employees and supervisors on the production floor. Extended periods of sitting or computer work may be required. Benefits • Medical, Dental, & Vision coverage, • Paid holidays + PTO, • 401K with company match, • Tuition reimbursement, • Paid parental leave, • Short-term disability, • Lunch provided daily, • Flexible work/life balance, • Employee discount on parts Salary $98,000 - $120,000/annually Requirements:

Job Description JOB SUMMARY The Department of Public Works (DPW) Waterworks Dispatcher will collect and dispatch information and requests for the approved services of the DPW Waterworks department and DPW Plumbing department via radio to the Waterworks team. This person will be responsible for the intake, coordination, tracking, and real-time monitoring of all incoming communications and requests for the DPW Waterworks Department at the Burning Man event. This position will maintain documentation according to shared standards, and update the tracking system and the office map regularly with updates on asset placement. This temporary, ineligible for benefits role is: • From August - September: Full-Time, Non-Exempt, based on-site out of Black Rock City, Nevada. The deadline to apply for this role is 5:00 pm Pacific on June 15th. DUTIES & ESSENTIAL JOB FUNCTIONS Operations (55%) • Collect, track, monitor, and efficiently dispatch incoming information and requests via radio to the DPW Water & Plumbing teams to ensure prompt response times., • Use database and logistics skills in collaboration with DPW Water & Plumbing Management to effectively monitor & adjust driver route schedules as needed to stay under 10 hours for safe and efficient operations., • Participate in Team Meetings and maintain related correspondence., • Review and understand the BRC Rain Contingency Plan, Burning Man Integrated Plan and emergency response plans; understand when to execute each with your team., • Follow guidance & regulations set by the DPW Dispatch Manager to ensure DPW and FCC communications standards are met. Documentation (40%) • Deliver adequate documentation of completed work, reports and progress of any request issues to the DPW Waterworks Manager; Immediately report concerns on the safety of water stored by BRC Infrastructure, Theme Camps, Artists, and Participants., • Work with Google products (Gmail, Docs, Sheets, Drive), Microsoft Word and Excel, and any additional online tools, technology or applications specific to this role as required., • Prepare written feedback for the DPW Utilities Manager describing the successes of the season, areas in need of improvement and suggestions with the purpose of improved overall efficiency for the next year; Submit an end-of-season EMBER Report. Other Functions and Responsibilities (5%) • Maintain clear and respectful communication with the DPW Waterworks Team, BRC Departments, Vendors, Participants, and Artists., • Work with the Waterworks Crew to plan and execute LNT and Waste disposal plans., • Actively participate in the maintenance of a clean and safe worksite using only OSHA approved safety equipment., • Read, understand, and abide by the rules and codes of conduct according to the Burning man Staff policies, protocols and behavioral standards., • Help implement Burning Man’s Integrated Plan and work with all BRC departments to ensure water distribution and safety., • Monitor personal well-being, be aware of work expectations, and proactively address any concerns with management., • Perform various other duties as assigned by DPW Waterworks Management. LEARNING AND TEACHING • Documentation - Assists in the creation, publishing, and maintenance of process documentation related to their assigned duties., • Knowledge sharing – Helps acculturate and educate junior staff in Burning Man culture and business processes., • Training development - Collaborates with the education team to develop training materials in their area of expertise, as requested., • Learning – Pursues ongoing learning in their area of expertise, working to stay current on emergent knowledge, skills, and processes. QUALIFICATIONS Required • Able and willing to follow standards set in necessary trainings that can be provided on site., • Prior experience with radio traffic control and radio technology with the disposition for handling stressful workloads and potential emergency situations in a focused and calm manner., • Experienced (1-3 years) in event production, dispatch, or related field., • Working knowledge of OSHA compliant personal protection equipment, first aid kits, and fire extinguishers., • Must have been to Burning Man and be familiar with the event worksite, Black Rock City and its departments., • Able to safely navigate city streets and access roads that are congested with participants, bicycles, and vehicles., • Proficient at navigating digital and online technology; Able to proactively engage in learning existing online applications, tools, systems, maps, and documents., • Expert in handling data entry with an attention for accuracy; highly organized, able to prioritize, and motivated with the ability to adhere to a strict schedule., • Clear, service-oriented and professional communication, verbally and written. Experienced with using 2 way radios and following radio protocol., • Operates with a high level of behavioral integrity, confidentiality and discretion of sensitive information; maintains tidiness in work ethics and the work environment, and remains calm and focused under pressure., • Capable of working in an extreme environment including drastic temperature changes, high winds, poor air quality and low to no visibility at times., • Ability to temporarily relocate for work at the Burning Man event held in Gerlach, Nevada. Preferred • Occupational background or education in water management or related field., • It is helpful if the candidate has been to Burning Man and is familiar with the event worksite, Black Rock City and its departments., • Experience working in remote wilderness and/or desert environments., • Familiarity with email, reading spreadsheets, and maps., • OSHA 10 Certification (May be earned through in house training)., • First-Aid knowledge., • Preferred to have a valid Driver’s License and a good driving record. Note: If you have gained the necessary experience to succeed in this role and have acquired this experience in other ways, we encourage you to apply and share all relevant experience in your application. COMPENSATION Individual compensation decisions are dependent on a variety of factors, including prior experience and geographical location. The anticipated rate for this position: • From August - September is $15.50 to $17.00 per hour. PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • On-playa: Work is primarily sedentary but will also include the need to find and meet with department representatives who may not be in the vicinity, therefore this could include walking or using some form of transportation. Some of the work will be in outside weather conditions and will be exposed to fumes or airborne particles as well as possible extremes in temperature. NOTICE FOR ALL APPLICANTS: • Burning Man Project celebrates the importance of creating a diverse environment and enthusiastically encourages Black, Indigenous, Peoples of Color, LGBTQIA+, Immigrant, women, and people with disabilities, of all ages, to apply., • Burning Man Project provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training., • Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Powered by JazzHR cbFF4rqwWQ

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Supervises the maintenance and repair of all operations and production equipment including all packaging machinery, capsule manufacturing, processing equipment, warehouse and order fulfillment equipment (including conveyors, lift trucks, and other material handling equipment), process HVAC systems, and other ancillary systems (including compressed air and dust collection units). Develops and evaluates bids for work by maintenance subcontractors and submits to manager for approval. May also be required to directly maintain and repair any of the listed equipment, depending on the needs of the department., • Tracks, updates, and helps to schedule all preventive maintenance activities at the headquarters plant, as well as throughout the Company’s retail stores., • Supervises the maintenance and repair of the physical plant operations area and supervises plant janitorial and sanitation work including cleaning and replenishment of plant lavatory supplies., • Works with Engineering on new and used equipment installation and rebuild projects. Performs other project work on an as-required basis., • Checks plant premises for possible pest entry or presence and arranges suitable countermeasures. Works with the Maintenance Manager to schedule and arrange spraying for infestation control throughout manufacturing and warehousing areas., • Assists in the planning, development, and implementation of new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of machinery, labor, and materials., • Monitors and updates the shop supply inventory and the equipment parts inventory., • Assists in the procurement and liquidation of operations and production equipment, as well as equipment, furnishings, and fixtures at the retail stores., • Works with engineering on new construction or remodeling projects in the plant on an as-required basis. Develops and evaluates bids from subcontractors including electrical, plumbing, HVAC, etc. and submits proposals to the Maintenance and Engineering Manager for approval., • Assists in supervising the maintenance, repair and construction work in all retail stores. Develops and evaluates bids from subcontractors and submits to the Maintenance Manager and Engineering Manager for approval. Acts as general contractor in coordinating and supervising work of subcontractors in store construction or repair projects. Provides assurance that work is completed on a timely basis and according to plans and specifications., • Reports on potential problems and progress on current projects in a timely manner., • Complies with safety and GMP requirements. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures (SPP). Reports ALL workplace incidents to manager immediately. Communicates concerns to manager, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. Responsible for safe work performance in area. Ensures the completion of job safety analyses, safety inspections and employee training. Acts as primary communicator of safe work practices and information to department. Facilitates employees’ participation in the safety activity card program and on safety teams. Completes incident investigation reports and submits them to manager by end of shift on which the incident is reported. Conducts safety contacts and documents corrective and preventative actions. Enforces company policies, procedures, SOP’s, SPP’s and safe work practices. SUPERVISORY RESPONSIBILITIES Directly supervises shift employees in the maintenance department. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • Bachelor's degree (B.S. or B.A.) and three to five years related experience and/or training or equivalent combination., • Course work or equivalent experience with basic concepts of engineering and physical science required. LANGUAGE SKILLS Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to top management, public groups, and/or boards of directors. MATHEMATICAL SKILLS Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Excellent problem-solving and analytical skills required. OTHER SKILLS AND ABILITIES • Ability to understand and apply basic engineering, physical science, and industrial design concepts., • Ability to understand and interpret engineering drawings. Has knowledge of practical use and care of hand tools and basic machine tools, • Excellent time management, attention to detail, verbal and written communication skills, listening, decision-making, and organization skills required., • Excellent computer skills required, including Microsoft Word and Excel skills., • Excellent interpersonal skills needed, including coaching, team-building and training skills. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; ascend and/or descend stairs; stoop, kneel, crouch, or crawl. The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 10 lbs. from ground level and hold weight overhead; return weight to starting position., • Tighten and/or loosen a standard torque wrench up to 50 ft./lbs., • Up to 33 lbs. from 5 inches off ground and raise to 47 inches and then return 33 lbs. to original position., • Up to 60 lbs. from 31 inch shelf and 2-hand carry for up to 5 ft. and then return 60 lbs. to 31 inch surface. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. Frequently exposed to all the FDA designated major food allergens (Milk, Eggs, Fish, Crustacean shellfish (e.g., crab, lobster, shrimp), Tree nuts (e.g., almonds, walnuts, pecans) except for peanuts, Wheat and Soybeans, Sesame. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE #hpnow

Job Description The role of QA/QC Inspector I provides inspections, examinations, and tests for electrical and mechanical components during construction projects in the mission critical environment. You will have the opportunity to tap into your curiosity and collaborate with industry personnel to maintain quality standards during construction of cutting-edge facilities. • This role requires significant travel, with expectations of up to 50-75% annually, especially if you are not currently residing near one of our key job site locations such as:, • Reno, NV, • Monroe, LA Responsibilities • Read and interpret documents such as safety rules, equipment and site drawings, specifications, operating and maintenance instructions, and procedure manuals., • Perform and record results for inspections, examinations, and tests., • Use tools and equipment required for quality control and assurance., • Determine measuring and test equipment is in proper condition for use., • Effectively write and communicate reports and correspondence. Speak before groups of customers or employees of partner organizations., • Coordinate with internal and external personnel for day-to-day scheduled activities., • Review QA/QC plans, schedules, and reports., • Review inspection, examination, and test procedures., • Setup inspections, examinations, and tests. Requirements • Education and experience requirements (one of the following):, • High school graduation or General Equivalency Diploma (GED) equivalent and 2 months of related experience in equivalent inspection, examination, or testing activities with Mechanical, Electrical, and Plumbing (MEP) systems. Experience is preferred with large project constructions practices in critical environments., • Completion of college level work leading to an Associate Degree in a related experience: Project management or similar role, 3-5 years, Construction and Mission Critical experience and environments preferred discipline plus 1 month of related experience in equivalent inspection, examination, and testing activities., • Visual acuity requirements:, • Ability in at least 1 eye to meet Snellen fraction threshold of at least 20/30 for near and far vision., • Ability to distinguish colors and contrast normally encountered in testing., • General understanding of all mechanical and electrical building systems, • Military Experience a plus, • Computer Skills: Microsoft Office Programs, Smartsheet, and Ajera experience is a plus, • Experience budgeting and forecasting, • Math Skills: Must be able to calculate figures and amounts (percentages and proportions), • Communication: Problem-solving, must be able give oral and written instructions professionally and clearly, • Outstanding organizational skills, • Ability to work from home and work effectively, • Familiarity with business and financial principles, • Leadership ability, • Travel: Ability to work effectively from a dedicated home office, with required travel to project sites 50-75% of the time, as noted above. Top Skills & Proficiencies • Detail Oriented, • Leadership, • Organization, • Responsiveness, • Decision-Making, • Data Entry Skills, • Data Processing Skills, • Dependable, • Reporting Skills, • Deadline Oriented, • Critical Thinking and Problem-Solving Skills, • Planning and Organizing, • Meme Generation, • Communication Skills, • Influencing and Leading, • Teamwork, • Negotiation, • Adaptability, • Stress Tolerance Work Conditions & Physical Demands • Must have a dedicated home office that is conducive to daily responsibilities., • Must be able to move about the work area and travel to work-sites as needed or required., • Must be able to communicate with a variety of individuals; must be able to follow verbal and written instructions/directions and respond to inquiries, • Must be able to frequently perform strenuous physical activity including but not limited to: stand for eight or more hours at a time, move in rugged or unstable conditions, work in adverse weather, handle or feel objects, tools or controls which may not be visible, reach overhead. Occasionally may be required to climb or balance, stoop, kneel, crouch or crawl., • Must be able to carry test equipment up to 30 pounds. #IND1

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin? Committed. Innovative. Engaged. If you're looking to take career to the next level and work with some of the best and brightest in the industry, we want to hear from you. We are an organization built on integrity. We have a culture that empowers people, embraces diversity, and inspires everyone to do their best. Rosendin is one of the largest electrical contractors in the United States employing over 7,000 people. We are the largest EMPLOYEE-OWNED company in the industry which means you will be a company owner too and have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success which means you benefit tremendously. YOUR NEXT OPPORTUNITY: The Assistant Project Manager is an entry-level project management position and is expected to learn and develop competency in the Essential Duties and Responsibilities. In addition, the APM is responsible for providing administrative and construction support for our Project Management team. WHAT YOU'LL DO: Manage project documentation, including submittals, RFIs, (Return for Information), and meeting minutes. Oversee project activities as assigned by the Project Manager, including planning, coordinating, circumventing/resolving problem areas, ensuring all company/project policies, procedures, and standards are maintained, etc. Maintain change orders, submittal, and document (drawing) control logs. Prepare required logs and other project documentation for construction meetings. Responsible for contract submittals that are accurate and timely. Responsible for creating and issuing the Subcontractors' contracts. Responsible for the assembly and timely delivery of the Owner and Maintenance Manuals. Ensure that the project quality control plan is followed. Interacts with subcontractors to ensure we have obtained the correct documentation and drawing for the Owner and Maintenance Manuals. Responsible for keeping the Warranty Log up to date. Attend company/project meetings with clients, subcontractors, etc., and provide project management support Cooperate with and technically assist field personnel assigned to the area of responsibility. Monitor other contractors' activities and progress. Responsible for creating the Job Information Sheets and establishing Job Files. Prepares price change orders and project reports and documentation. Works with payroll to ensure accurate payroll information. The duties and responsibilities describe this position's general nature and scope of work. This is a partial listing, and other responsibilities will be assigned based on the position's role within the business unit. WHAT YOU'LL NEED TO BE SUCCESSFUL: Knowledge of construction technology, scheduling, equipment, and methods required Tactful and has a professional demeanor, and ability to interact effectively with managers, employees, vendors, and others Strong organizational, record-keeping, and follow-up skills Strong attention to details Demonstrated excellence in organization and time management skills Identify and meet customers' expectations and requirements Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Oracle preferred Prioritize and manage multiple tasks, changing priorities as necessary Work under pressure and adapt to changing requirements with a positive attitude Oral and written communication skills as required for the position Self-motivated, proactive, and an effective team player Interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others WHAT YOU BRING TO US: Bachelor's degree in Construction Management or related field Minimum 1 year of experience in a construction-related role Can be a combination of training, education, and relevant work experience that is equivalent TRAVEL: • Up to 25% WORKING CONDITIONS: General work environment - This position is performed primarily on active construction sites. Activity includes sitting for extended periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning. Noise level is typically low to medium. Occasional lifting of up to 30 lbs. We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits ESOP - Employee Stock Ownership 401k Annual bonus program based upon performance, profitability, and achievement 17 PTO days per year plus 10 paid holidays Medical, Dental, Vision Insurance Term Life, AD&D Insurance, and Voluntary Life Insurance Disability Income Protection Insurance Pre-tax Flexible Spending Plans (Health and Dependent Care) Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law.

Job Description JOB SUMMARY The Department of Public Works (DPW) Mobile Fuel Dispatcher will collect and dispatch information and requests via radio to the Mobile Fuel Operations team. This person will be responsible for the intake, coordination, tracking, and real-time monitoring of all incoming communications and requests for the DPW Fuel Department at the Burning Man event. This position will maintain documentation according to shared standards, and update the tracking system and the office map regularly with updates on asset placement. This temporary, ineligible for benefits role is: • From September - September: Full-Time, Non-Exempt, based on-site out of Black Rock City, Nevada. The deadline to apply for this role is 5:00 pm Pacific on MAY 11th DUTIES & ESSENTIAL JOB FUNCTIONS Daily Operations & Maintenance (55%) • Collect, track, monitor, and efficiently dispatch incoming information and requests via radio to the DPW Mobile Fuel Operations team to ensure prompt response times., • Use database and logistics skills in collaboration with the DPW Assistant Manager of Mobile Fuel Operations to effectively monitor & adjust truck route schedules as needed to stay under 10 hours for safe and efficient operations., • Participate in Team Meetings and maintain related correspondence., • Review and understand the BRC Rain Contingency Plan, Fuel Spill Response Plan, and Burning Man Integrated Plan and assist in execution if necessary., • Follow guidance & regulations set by the DPW Dispatch Manager to ensure DPW and FCC communications standards are met. Documentation and Tracking (40%) • Keep an ongoing accurate and legible log of all dispatch communications and their resolution status., • Document any issues with Fuel Department operations and deliver written reports to DPW Mobile Fuel Ops Management., • Work with Google products (Gmail, Docs, Sheets, Drive), Microsoft Word and Excel, and any additional online tools, technology, or applications specific to this role as required., • Commit to improving and updating Standard Operating Procedures (SOP) for this role throughout the season for accuracy., • Prepare written feedback for the DPW Utilities Manager describing the successes of the season, areas in need of improvement, and suggestions with the purpose of improved overall efficiency for the next year; Submit an end-of-season EMBER Report. Other Functions and Responsibilities (5%) • Maintain clear and respectful communication with the DPW Fuel Team, BRC Departments, Vendors, Participants, and Artists., • Work with the Fuel Crew to plan and execute LNT and waste disposal plans., • Participate in the maintenance of a clean and safe worksite using only OSHA-approved safety equipment., • Read, understand, and abide by the rules and codes of conduct according to the Burning Man Staff policies, protocols, and behavioral standards., • Monitor personal well-being, be aware of work expectations, and proactively address any concerns with management., • Perform various other duties as assigned by or discussed with DPW Fuel Management. LEARNING AND TEACHING • Documentation - Assists in the creation, publishing, and maintenance of process documentation related to their assigned duties., • Knowledge sharing – Helps acculturate and educate junior staff in Burning Man culture and business processes., • Training development - Collaborates with the education team to develop training materials in their area of expertise, as requested., • Learning – Pursues ongoing learning in their area of expertise, working to stay current on emergent knowledge, skills, and processes. QUALIFICATIONS Required • Able and willing to follow standards set in necessary training that can be provided on-site:, • Liquid fuel handling, • Completed DPW Liquid Fuel Operations packet, • Accurate use of handheld digital devices for tracking needs, • Working knowledge of OSHA-compliant personal protection equipment, first aid kits, and fire extinguishers., • Capable of climbing a ladder and safely transversing the top of the fuel storage tanks to measure the fuel levels., • Able to safely navigate city streets and access roads that are congested with participants, bicycles, and vehicles., • Proficient at navigating digital and online technology; Able to proactively engage in advanced learning, and effectively update large amounts of data in existing online applications, tools, systems, spreadsheets, and documents., • Expert in handling data entry with attention to accuracy; highly organized, able to prioritize, and motivated with the ability to adhere to a strict schedule., • Operates with a high level of behavioral integrity, confidentiality, and discretion of sensitive information; maintains tidiness in work ethics and the work environment, and remains calm and focused under pressure., • Able to efficiently and accurately track fuel usage and Fuel Team operations with a high attention to detail., • Clear, service-oriented, and professional communication, verbal and written. Experienced with using 2-way radios and following radio protocol., • Capable of working in an extreme environment including drastic temperature changes, high winds, poor air quality, and low to no visibility at times., • Ability to temporarily relocate for work at the Burning Man event held in Gerlach, Nevada. Preferred • It is helpful if the candidate has been to Burning Man and is familiar with the event worksite, Black Rock City and its departments., • Experience working in remote wilderness and/or desert environments., • Familiarity with email, reading spreadsheets, and maps., • OSHA 10 Certification (May be earned through in-house training)., • First-Aid knowledge., • Preferred to have a valid Driver’s License and a good driving record. Note: If you have gained the necessary experience to succeed in this role and have acquired this experience in other ways, we encourage you to apply and share all relevant experience in your application. REQUIRED LICENSES/CERTIFICATIONS N/A COMPENSATION Individual compensation decisions are dependent on a variety of factors, including prior experience and geographical location. The anticipated rate for this position: • From August - September is $14.00 to $16.00 per hour. PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • On-playa: Work is primarily sedentary but will also include the need to find and meet with department representatives who may not be in the vicinity, therefore this could include walking or using some form of transportation. Some of the work will be in outside weather conditions and will be exposed to fumes or airborne particles as well as possible extremes in temperature. NOTICE FOR ALL APPLICANTS: • Burning Man Project celebrates the importance of creating a diverse environment and enthusiastically encourages Black, Indigenous, Peoples of Color, LGBTQIA+, Immigrant, women, and people with disabilities, of all ages, to apply., • Burning Man Project provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training., • Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Powered by JazzHR lrzL1gAQaJ

Job DescriptionDescription: GENERAL SUMMARY: The Operations Coordinator reports directly to the Regional Director, Northern Nevada and performs support functions for NV Operations. The Operations Coordinator is responsible for the collection, transfer, maintenance, and organization of accurate and complete data related to company facilities, maintenance, transportation, and salvage operation activities so that it may be used to analyze operational efficiency and effectiveness. The Operations Coordinator screens, contacts and schedules interviews through Paylocity. Additionally, the Operations Coordinator is responsible for performing organizational administrative functions such as filing, routing correspondence, and organization of common office supplies. This position works cooperatively with all Goodwill Industries® of Sacramento Valley and Northern Nevada, Inc. (Goodwill) staff and acts responsibly with confidential and proprietary information. ESSENTIAL DUTIES & RESPONSIBILITIES: The following reflects management’s definition of essential functions for this job but does not restrict the tasks that may be assigned. Management may assign or reassign duties and responsibilities to this job at any time due to reasonable accommodation or other reasons. • Responsible for scanning and electronic filing of Goodwill facilities documents including but not limited to licenses, correspondence, warranty information and testing results into asset management software (AMT) as requested., • Responsible for processing salvage receipts and entering data into salvage spreadsheets., • Prepares, renews, and processes Purchase Orders for NV Operations and related services consistent with applicable deadlines., • Effectively communicates with each store to maintain their employee staffing levels., • Effectively communicates with vendors and coworkers to answer questions, disseminate or explain information, and address complaints., • Assists Regional Director with ordering, scheduling, vendor communications, etc., • Routes and distributes daily incoming and outgoing mail, deliveries and emails to appropriate staff., • Performs data entry and prepares typed materials as requested., • Maintains knowledge of and ensures compliance with company policies, CARF standards, safety and security regulations., • Other related duties as assigned. Requirements: QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the minimum knowledge, skill and/or ability required. • Must be at least 18 years of age, • Excellent analytical skills and logical thinking to organize and evaluate workflow., • Strong interpersonal and communication skills., • Ability to maintain a professional and courteous attitude and work co-operatively within a team environment., • High level of attention to detail and thoroughness., • Efficient time management., • Ability to manage multiple tasks., • Proficient digital literacy such as Microsoft Excel and Word applications., • Ability to operate computer systems, internet, database software, scanner, printer, copier, fax machines, and email., • Must provide proof of identification and eligibility to work in the United States of America., • Must be able to perform essential functions of this job description with or without reasonable accommodation., • No record of disclosure of criminal conviction that indicates and an ongoing tendency toward theft, violence, dishonesty, deceit, drug manufacture or sale, moral turpitude, or predatory behavior., • High adaptability required POSITIONS SUPERVISED: • No positions supervised. POSITION INFORMATION: This position is a full time, non-exempt position eligible for Medical, Dental, Vision, Life Insurance; 403(b) retirement plan; Paid Holidays, Vacation and Sick Leave. . This position is employed by Goodwill Industries® of Sacramento Valley and Northern Nevada, Inc. WORK CONDITIONS/HAZARDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to drive, stand, walk, sit, use hands and fingers, reach with hands and arms, climb or balance, stoop, kneel, crouch or crawl and talk or hear. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Work environment is usually hectic/fast paced with frequent short deadlines and instances of unusual situations. Travel to various company locations may be required. This job description does not cover all the activities, duties or responsibilities required of this role. Omission of specific statements of duties does not exclude them from the position if the work is similar or related to the position. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice to accommodate the needs of the organization. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.

Job DescriptionSalary: $80k-$500k+ (uncapped) Position Overview A.C. Moate Industries is expanding in the Reno, Nevada market and is seeking an experienced Asphalt Estimator / Sales Professional to support and drive this growth. This role is best suited for a results-driven professional who excels at developing relationships, generating new business opportunities, and managing the full sales and estimating process. The ideal candidate brings industry experience, operates independently, and has a strong track record of converting opportunities into revenue. This is not an entry-level position. Key Responsibilities • Conduct on-site meetings with clients to assess project needs, • Evaluate pavement conditions, including asphalt, sealcoat, striping, and repair scopes, • Develop and present accurate, professional estimates and proposals, • Manage the full sales cycle from initial contact through contract execution, • Build and maintain long-term client relationships, • Perform consistent follow-up to secure new and repeat business, • Contribute to market expansion efforts within the Reno commercial sector Qualifications • Minimum of 5 years of experience in asphalt, paving, or construction estimating and sales, • Demonstrated success in closing deals and managing client relationships, • Strong understanding of pavement systems and maintenance solutions, • Excellent communication, negotiation, and presentation skills, • Self-motivated with the ability to work independently, • Strong organizational and time management skills, • Valid drivers license required, • Ability to work in the field and maintain a flexible schedule as needed Preferred Experience • Established relationships within:, • Commercial Property Management, • General Contracting, • Facility Management, • Real Estate Development Compensation & Benefits • Annual earnings potential of $80,000 $500,000+, • Uncapped commission structure, • Company vehicle provided (Tesla or Truck), • Tesla option includes home charging assistance and on-site charging access, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off

Job Description The Management Trust Position Title: Community Support Specialist Location: Reno, NV Reporting To: Regional Manager Status: Non-Exempt, Full-Time Salary: $17.00 - $19.00/Hourly DOE COMPANY PROFILE: The Management Trust is a community association management company. We believe that building and maintaining a community takes more than just hammers and nails. It takes integrity, trust, experience, and support. Our success is based on the belief that effective management anticipates our clients’ needs, not merely reacts to them. We are a company of creative and committed individuals driven by grand aspirations and are proud to be the only 100% employee-owned community management firm in the nation. Our Employee Owners are encouraged to actively participate in growing our business by helping define best practices every day. It is in this spirit that we encourage you to explore this opportunity to join The Management Trust team. EMPLOYEE OWNER POSITION PURPOSE: The Community Support Specialist (CSS) is responsible for providing exceptional customer service and quality administrative support to both internal and external clients, including, but not limited to: partnering with Community Association Managers (CAMs) and Assistant Community Association Managers, managing complex Work Orders and Architectural Review requests, managing amenity requirements, performing special projects/research, and various coverage (i.e. phone). JOB DUTIES AND RESPONSIBILITIES: • Receive customer phone calls and answer questions related to the status of work orders, ARC requests, or Association responsibilities, • Maintain current community information for Welcome Packet in appropriate system location, • Manage review, assignment, and follow-up for complex Association Work Orders requiring committee approval, a board approval process, or specialized vendors, • Document actions taken with system notes, • Box, archive, and log documents for off-site storage not less than annually per Association, • Process compliance notices (either post-inspection or as needed) in accordance with community guidelines, add fines and hearing outcomes as directed by CAM or ACAM following a Board meeting., • Manage, review, and process complex ARC applications (e.g. outside architect, deposit, or special plans or paperwork required), • Monitor for status and timelines of ARC Applications and maintain system records as needed, • Maintain system entry and logs for homeowner records including parking passes, amenity reservations, deeded parking or storage, • Manage tracking and distribution of access devices for communities including keys, fobs, or parking passes, • Manage amenity reservation processes in accordance with community guidelines, • Manage and organize physical ballots returned to office for elections, • First escalation for all homeowner phone calls transferred from reception, • Depending on location, may be required to provide periodic relief for Division Receptionist (if Receptionist is absent, during lunch periods, etc.), • Monitor for completion of ad-hoc Community Support Task items such as managing access device projects, special mailers, newsletter information, • Support updating of Association information in system of record including Board and Committee information, vendor contact information, updates to rules and maintenance obligations, and document libraries, • Coordinate with Service providers for questions, such as those related to access to the community or parking enforcement, • Support in documentation of maintenance of third-party systems utilized by specific communities, • Other duties and special projects as assigned QUALIFICATIONS: • High School Diploma (or equivalent); Associate’s Degree preferred, • Proficiency in administrative support – generally between 1-4 years, depending on the position level, • Experience with Microsoft Office suite of products, • Ability to identify and prioritize tasks, • Ability to multi-task and provide support to multiple communities while understanding their unique rules and requirements, • Conflict resolution skills, • Highly organized and able to monitor records for pending deadlines, • Excellent written and verbal communication, • Ability to provide high-level customer service with astute attention to detail and organization, • Must be a team player, • Ability to utilize technology including phone systems, reports, and office equipment to efficiently discharge tasks, • Adaptable and dependable with a solid attendance record, • Professional and respectful demeanor with all internal and external customers at all times SPECIAL POSITION REQUIREMENTS (VARIES BY LOCATION/NOT A GLOBAL REQUIREMENT): • None ESSENTIAL FUNCTIONS: • Use standard office equipment, including: computer, phone, copier/scanner, etc., • Be stationary for periods of time, • Relocate up to (25) pounds, • Travel to and from offsite locations SUPERVISES OTHERS? IF SO, LIST: • None SCHEDULE & TRAVEL: • Monday-Friday from approx. 8:00 am-5:00 pm, • This position may require occasional long hours to meet business needs The Management Trust is an Equal Opportunity employer. We celebrate and support diversity. TMT reserves the right to modify this job description at any time based on business need.

Job Description We are seeking motivated individuals to join our team as HVAC Maintenance Technician Trainees. This entry-level position is designed to provide hands-on training and mentorship, equipping you with the skills needed to excel in the HVAC industry. You will work alongside experienced technicians, learning the ins and outs of HVAC customer service, sales, maintenance and service. NOTE - Heavy Customer Service - In Home Residential HVAC (Hourly + Commission Role) Interviewing now for training class starting July 13th 2026 After training you will be able to: • Customer Interaction: In-home sales, suggest products and services as required by homeowner., • Assist with HVAC maintenance and repair: Support senior technicians in performing maintenance and repairs on various HVAC systems., • Learn diagnostic techniques: Gain knowledge of advanced diagnostic tools and methods to identify and resolve HVAC issues., • Perform basic maintenance tasks: Conduct routine system checks, clean components, and replace filters., • Customer interaction: Develop customer service skills by assisting with client interactions and addressing their concerns professionally., • Safety and compliance: Adhere to all safety standards and regulations, ensuring a safe working environment., • Documentation: Assist in maintaining accurate records of services performed and parts used. Qualifications: • Education: High school diploma or GED; enrollment in or completion of an HVAC training program is a plus., • Skills: Strong willingness to learn, excellent problem-solving abilities, attention to detail, and effective communication skills., • Physical Requirements: Ability to work in various conditions, including confined spaces and at heights; physical stamina and dexterity., • Attitude: Reliable, self-motivated, and eager to develop a career in HVAC. Benefits: • Paid Training Program, • Potential to Earn $60-80k in Your First Year (Hourly + Commission Role), • Company Vehicle + Gas Card, • Tools Provided, • 401k, Medical, Dental, Vision, and Life Insurance Apply today #SIRP #CGTRN #ASI Pay Range$60,000—$80,000 USD About Sierra Air: Sierra Air has installed over 30,000 heating and cooling systems in this area since 1986. We’ve earned a great reputation for providing our customers with friendly, reliable service and practical solutions that result in year-round comfort and savings. Honesty, integrity, and excellent customer service is our constant goal and top priority. Carrier Corporation has selected us as their “Elite Leadership Dealer” for the Northern Nevada area. This allows us access to Carrier equipment and training that is not available to any other dealer. Privacy Policy

Location: Sparks, NV Job Type: Full time Requisition ID: JR100073 RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV. Position Summary The Customer Support & Service (CSS) Field Service Repair Coordinator is primarily responsible for the planning, organizing and execution of Government, and Commercial repair activities via direct support of RIX Field Service Technicians, as well as associated operational and administrative duties. This is a specific, focused position coordinating repair, troubleshooting, and other on-site activity of RIX products for RIX Customers. Responsibilities • Planning and coordination of all Field Service Repair and support activities for RIX Technicians., • Maintain professional and organized communication with customers., • Participate in external and internal calls/meetings as directed., • Provide pricing proposals, maintenance of budgets, security access letters/forms, Invoicing, expense management, (track expenditures and transactions), to client and local performance requirements and Standards., • Communicate with customers through external/customer portals., • Negotiate with clients and supply a visible Schedule of RIX personnel for RIX Management, with a goal of maximum customer satisfaction, and the best level of personnel utilization achievable., • Foster and support positive relationships across RIX Teams and with external stakeholders., • Ensure technology is used appropriately for all operations (video conferencing, presentations etc.)., • Support Filed Service Technicians with Material and expedite where required., • Ensure implementation of RIX policies, application of RIX procedures, and development of associated practices. Recommend and implement process improvements as identified., • Responsible for accurate and timely data entry into the company ERP System., • Acts and performs as a back-up, where appropriate for the CSS Director of Customer Support., • Performing all assignments and other duties in the best interest of the company, our RIX Technicians and/or as directed. Minimum Qualifications • Associate degree in Business Administration, Program Management, or related field from an accredited college or university, or 3 or more years of relevant experience in Government services or Field Service., • Knowledge and experience in budgeting, documentation, and reporting., • Proficient in MS Office., • Solid Understanding of Purchase Orders, Firm, Fixed Price (FFP)/Time& Material(T&M), and Cost Plus (Cost+) Contracting methods, principles, and practices, • Superb time-management and organizational skills., • Outstanding verbal and written communication skills., • Detail-oriented and efficient., • Ability to communicate with others to exchange information both orally and in writing., • Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. Preferred Qualifications • 3 or more years of relevant experience in a Field Service environment Physical Requirements 1. Must have the following physical abilities: • Ability to stoop, kneel, crouch, bend, stretch, reach, and lift., • Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers. Compensation: $30.00 + DOE Equal Opportunity RIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations). About RIX Industries RIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our ‘focused on the future’ mantra seriously – whether we’re supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we’re poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture. PIeed4435fde85-37820-40716960

Job DescriptionDescription: Vortex Doors, America’s highest quality and most customer-centric commercial and industrial door repair company, is seeking Service Technicians to join our team of door industry professionals. We are considering applicants with door experience or entry level with no experience! As an Service Technician, you will play a crucial role in installing, repairing, and maintaining various types of doors and related hardware, ensuring they function efficiently and safely. Your attention to detail, problem-solving abilities, strong mechanical aptitude, and commitment to quality workmanship will be essential in meeting our customers' needs. Key Responsibilities: • Door Installation: Install and repair a variety of commercial doors using appropriate tools and equipment., • Repairs and Maintenance: Diagnose and conduct routine repair door-related issues, such as broken springs, hinges, locks, and electrical components., • Hardware Installation: Install and configure door hardware, such as locks, handles, closers, and access control systems., • Safety Compliance: Ensure that all installed doors meet safety and building code regulations and standards., • Customer Service: Provide excellent customer service by addressing client inquiries, explaining repair processes, and offering solutions to door-related problems., • Documentation: Maintain accurate records of service visits, repairs, and installations, and provide reports as required., • Troubleshooting: Diagnose, identify, and resolve technical issues with doors efficiently. Communicate with customers offering cost-effective solutions., • Quality Assurance: Perform quality checks on installations and repairs to ensure they meet company standards. Great Reasons to Work at Vortex: • Industry-Best Training., • Commercial/Retail door opening, hardware, and storefront glazing training., • Manual operated doors and dock equipment training for Industrial openings., • Hollow metal door, frame, and hardware training., • Strong Safety Culture., • Positive Work Environment., • Recognitions and Rewards., • Comprehensive health benefits, 401K match, 8 company paid holidays, and PTO., • Company provided uniforms and an annual boot allowance. Work Schedule: • Full-time shifts are available between Vortex business hours of 7:00 AM - 5:30 PM, Monday through Friday with potential overtime and on-call hours.Requirements:, • High school diploma or equivalent., • 2+ years’ experience in the commercial door service industry is a plus., • Knowledge of various door types, brands, and hardware is a plus., • Ability to use hand and power tools effectively., • Excellent problem-solving and troubleshooting skills., • Proficiency in performing mathematical calculations involving fractions and reading a tape measure accurately for precise measurements and installations., • Good communication and customer service skills., • Attention to detail and a commitment to quality workmanship., • Knowledge of safety regulations and adherence to safety protocols., • Valid driver's license with a clean driving record, • Physical ability to lift up to 50 pounds., • Physical ability to continuously lift and bend, climb ladders up to 20’ in height, work on knees for extended periods of time and proficient operating power tools., • Additional ongoing training provided.

Job Description $20–$25/hour | No Weekends. Ever. | 1–2 Hrs/Night | Start This Week $800 SIGN-ON BONUS - Paid after 90 days. Show up, do the work, collect your bonus. We're hiring Valet Porters in the Spanish Springs area. If you want a short, reliable evening shift that fits around your life - with competitive pay, no weekends, and a team that takes care of its people - this is it. Spots fill fast. Apply today and you could be on a route by the end of this week. WHY PEOPLE LOVE THIS JOB Short shifts - Most Porters finish in under 2 hours and are home for the night. No weekends. Ever. Your evenings are short and your weekends are completely yours. You work independently with no micromanagement - you run your route at your own pace. This shift is built for busy people: students, second-job seekers, and caregivers love it because it wraps around an existing schedule. The route is consistent and predictable - same time, same community, every week. And if you're thinking longer term, every manager at WSI started as a Porter. We promote from within, 100% of the time. WSI is also an award-winning employer, recognized 6 times for service excellence including the 2024 Greystar Outstanding Partnership Award and 2024 Vendor of the Year. WHAT YOU'LL DO Each evening you'll walk your assigned Sparks or Spanish Springs apartment community. You'll collect bagged trash, recycling, and cardboard from residents' doors and transport everything to the onsite dumpster, chute, or compactor. You'll separate recycling, check for contamination, and tidy up common areas. Check-in and check-out happens through a mobile app where you'll document your route, upload photos, and leave courtesy notices when needed. SCHEDULE AND PAY Shifts run Monday through Friday evenings only. Typical start time is 6:30 or 7:00 PM and most Porters finish within 2 hours. There are no weekend requirements. Pay is $20 per hour at standard sites and $25 per hour at sites that require use of a personal open-bed pickup truck. WHAT YOU NEED You must be 18 or older with a valid Nevada driver's license and auto insurance. A smartphone with an active data plan and location services is required. You should be reliable, professional, and self-motivated, and able to walk extensively, climb stairs, lift and carry up to 50 lbs, and work outdoors in varying weather. A personal open-bed pickup truck is required at select sites, where pay increases to $25 per hour. You must be able to speak, read, and write in English. No experience? No problem. We train everyone. If you show up and do the work, you'll succeed here. ABOUT WSI TRASH AND RECYCLING VALET Founded in Utah in 2010, WSI is a family-owned, majority women-operated company and a recognized industry pioneer in valet trash and recycling. We serve apartment communities across Utah, Nevada, and Idaho with over 30,000 doors served every night. Our Porters are the backbone of what we do and we take care of the people who take care of our communities. WSI has earned six industry awards for service excellence, sustainability, and client satisfaction including the 2015 Business Recycler of the Year, 2017 and 2019 Industry Partner of the Year, 2018 Best of State, 2024 Greystar Outstanding Partnership Award, and 2024 Vendor of the Year. WSI Trash and Recycling Valet is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Apply today. Applications are reviewed on a rolling basis and qualified candidates are contacted as positions open. trash valet, valet trash, recycling valet, valet porter, trash porter, apartment porter, residential porter, property porter, waste porter, sanitation porter, trash technician, valet trash technician, recycling technician, doorstep trash collection, door to dumpster, trash pickup, trash runner, bin porter, waste handler, grounds porter, evening job, night job, part-time evening, short shift, 1 hour shift, 2 hour shift, second job, side job, side hustle, supplemental income, extra income, extra money, no weekends, work after 6pm, evening only, nighttime job, weeknight job, low hour job, quick shift, student job, college student, retiree job, stay at home parent job, caregiver job, DoorDash alternative, Uber alternative, Amazon Flex alternative, delivery alternative, walking job, outdoor job, solo work, work alone, Spanish Springs jobs, Sparks jobs, Reno jobs, Sun Valley jobs, north Reno jobs, Washoe County jobs, part-time jobs near me, evening jobs near me, $20 an hour, $25 an hour, start this week, fast hire, quick hire, no experience required, entry level, training provided, no degree required, general labor, will train, beginner friendly, active job, physical job, get paid to walk, no desk job, hands on work, independent route, multifamily services, apartment community, property services, residential waste collection, waste management, sanitation services, facilities services, property maintenance, community maintenance, concierge trash, valet waste, doorstep collection, amenity services, WSI, Waste Solution Innovators, Nevada trash valet, Nevada porter job Job Posted by ApplicantPro

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Production Areas: • Performs all daily duties as stated in the Master Sanitation Schedule:, • Cleans and sanitizes all common areas such as hallways, lockers, locker areas, sanitation rooms, dust collector rooms, drains, docking areas, ovens, ceiling vents and tiles, • Deep cleaning of production work stations as requested, • Removal and disposal of trash and cleaning of garbage bins, • Assist production personnel with changeovers and workstation cleaning., • Operates the following equipment to assist with sanitation:, • Electric pallet jack, forklift and man-lift to assist in performing the sanitation duties, • Floor scrubbers, power washers and explosion proof vacuums, • Dust collectors, • Checks Soap Titrations and water temperature in tote washers., • Refills soap, sanitizers, paper towels, and other personal protective equipment., • Assists with continuous improvement by Identifying opportunities for quality and sanitation., • Performs sanitation related tasks including but not limited to scrubbing, mopping of the floors, walls and equipment; removing trash; using the proper chemicals / equipment and all other related duties as assigned., • Operates electric pallet jack, forklift and man-lift to assist in performing sanitation duties., • Completes daily task documentation as required., • Reports all repairs and maintenance issues throughout the facility in a timely manner., • Supports Production and Quality teams through sanitation efforts and initiatives., • Complies with safety, cGMP, SOP and SQF requirements. Warehouse and Non-Production Areas: • Performs all daily duties as stated in the cleaning schedule, • Cleans and sanitizes all common areas such as cafeteria, offices, restrooms, entrances, stairwells, lockers, conference rooms., • Washes walls, ceiling, and woodwork; washes windows, door panels, and sills., • Cleans washrooms, including sinks, toilets, and floors. Replenishes bathroom supplies., • Cleans warehouse areas including loading docks, rails, racks, restrooms and offices., • Deep cleaning of offices, hallways, and other common areas., • Removal and disposal of trash and cleaning of garbage bins., • Operates the following equipment to assist with sanitation, • Electric pallet jack, forklift and man-lift to assist in performing the sanitation duties, • Floor scrubbers, power washers and vacuums, • Refills soap and sanitizers., • Assists with continuous improvement by Identifying opportunities for quality and sanitation., • Performs sanitation related tasks including but not limited to scrubbing, mopping of the floors, walls and equipment; vacuuming, removing trash; using the proper chemicals / equipment and all other related duties as assigned., • Operates electric pallet jack, forklift and man-lift to assist in performing the sanitation duties., • Completes daily documentation as required., • Reports all repairs and maintenance issues throughout the facility., • Supports Production and Quality teams through sanitation efforts and initiatives., • Complies with safety, cGMP, SOP and SQF requirements. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP’s, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. PERFORMANCE ABILITY QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED), • Experience in manufacturing sanitation environment, preferably food or pharmaceuticals helpful., • Prior forklift experience preferred. LANGUAGE SKILLS Ability to read and interpret documents such as MSDS sheets, safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to fill out sanitation/production paperwork accurately. Good verbal communication skills required. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. OTHER SKILLS AND ABILITIES • Basic computer and data entry skills required., • Ability to operate various types of powered industrial equipment (electric pallet jack, forklift and man ) required., • Good attention to detail skills required., • Exhibits strong teamwork skills; possesses a good, “can do” attitude; collaborates with others; works in a fast-paced environment while following all company policies and procedures, including all safety policies; and exhibits flexibility and willingness to learn new tasks, change tasks and work in different areas as needed. REASONING ABILITY Ability to apply commonsense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and/or walk; ascend and/or descend stairs; and reach with hands and arms, including overhead reaching and horizontally on a ladder (up to 10 feet); bend, stoop, kneel, crouch, or crawl. Employee will be required to use a lift truck, with a height of up to 20 feet. The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: • Up to 30 lb. force for up to 25 feet and then pull to original position., • Up to 33 lbs. from 5 inches off ground and raise to 47 inches and then return 33 lbs. to original position., • Up to 50 lbs. for 3 feet at waist level; lift bag/box onto side and return to original position., • Up to 60 lbs. from 31 inch high shelf and 2-hand carry for up to 5 ft. and then return 60 lbs. to 31 inch surface. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. This position works in all areas of NOW’s manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

Job Description Job Title: Maintenance Technician Reports To: Lead Maintenance RCMI Property: Village at Iron Blossom GENERAL PURPOSE OF JOB The Maintenance Technician supports the overall maintenance operations of the property by performing corrective, preventative, emergency, and cosmetic repairs, as well as completing make-ready units. This role ensures the physical asset is maintained in a safe, functional, and visually appealing condition consistent with company standards and operational objectives. DUTIES, RESPONSIBILITIES AND KEY ACCOUNTABILITIES The following duties are essential to the successful performance of this position. This list is not exhaustive and may be supplemented as necessary to meet operational needs. 1. Preventative & Routine Maintenance Performs ongoing maintenance and repairs to preserve property integrity, including: • Electrical and plumbing systems, • HVAC systems (A/C and heating), • Boilers (gas and electric), • Water irrigation systems, • Interior and exterior lighting, • Gas fixtures and appliances (when applicable), • Security systems and fire protection equipment, • Pool and pool equipment, • Grounds maintenance and detailing 1. Corrective & Emergency Repairs Diagnoses and performs repairs to maintain safe and functional property conditions, including: • Roofing, gutters, fasteners, • Ceiling leaks and walls, • Stairs, gates, fences, patios, railings, • Doors, locks, cabinets, windows, sliding glass doors, • Tile, carpet, flooring, • Fireplaces and ceiling fans, • P.O. boxes and locking systems 1. Unit Turns & Make-Ready Process • Completes make-ready units in accordance with quality standards, • Prepares units for occupancy within required timelines, • Coordinates with management regarding readiness status 1. Inventory, Tools & Shop Management • Maintains clean, organized, and safe maintenance shop, • Ensures adequate inventory of parts and supplies, • Properly stores and maintains tools and equipment, • Reports major repair needs prior to expenditures 1. Customer Service & Professional Conduct • Provides professional and courteous service to residents, • Maintains professional appearance at all times, • Communicates effectively with management and residents, • Supports team members and property operations 1. On-Call & Additional Assignments • Participates in on-call rotation, • Responds to after-hours emergencies as required, • Completes special projects assigned by Lead Maintenance, Property Manager, or Regional Maintenance Supervisor 1. Other Projects and Duties • Complete additional projects assigned by the Senior Leadership or Regional Supervisor as the business needs may arise. 1. Key Accountabilities • Timely completion of assigned work orders and service requests, • Completion of make-ready units within established turn-time standards, • Proper reporting of major repairs prior to cost expenditure, • Participation in on-call rotation and emergency response, • Maintenance of safe and organized shop and work areas, • Compliance with safety policies and company procedures CAREER PROGRESSION Maintenance Technician roles may progress based on performance, certifications, and demonstrated leadership: • Maintenance Technician I (Entry Level), • Maintenance Technician II (Intermediate), • Maintenance Technician III (Advanced), • Lead Maintenance Technician, • Area Maintenance Supervisor Advancement is based on experience, certifications, technical competencies, performance, and business needs. POSITION REQUIREMENTS Core Competencies • Technical Proficiency - Demonstrates working knowledge of building systems and performs repairs accurately and safely., • Problem Solving - Identifies root causes of maintenance issues and implements effective, lasting solutions., • Time Management - Prioritizes work orders and tasks efficiently to meet deadlines., • Attention to Detail - Ensures repairs and make-ready units meet quality standards without oversight., • Customer Service Orientation - Maintains professional and courteous interactions with residents and team members., • Communication Skills - Clearly communicates repair needs, project updates, and concerns to management., • Safety Awareness - Adheres to OSHA standards and company safety procedures at all times., • Team Collaboration - Works cooperatively with maintenance and management teams to support property goals. EDUCATION and/or EXPERIENCE • High School Diploma or GED equivalent required, • 1–3 years of maintenance experience required, • HVAC Certification preferred, • Valid Driver’s License required COMPUTER, TECHNICAL & EQUIPMENT SKILLS • Basic Microsoft Office proficiency, • Ability to safely operate high-powered maintenance tools and equipment, • Working knowledge of building systems, HVAC, plumbing, and electrical systems WORK ENVIRONMENT This job entails moderate noise and clear vision. The frequency of exposure to work environment conditions is as follows • Close vision (clear vision at 20 inches or less) – Viewing Computer Screen, • Wet or humid conditions (non-weather): none, • Work near moving mechanical parts: 1/3 – 2/3, • Work in high, precarious places: under 1/3, • Fumes or airborne particles: under 1/3, • Toxic or caustic chemicals: under 1/3, • Outdoor weather conditions: over 2/3, • Extreme cold (non-weather): under 1/3, • Extreme heat (non-weather): under 1/3, • Risk of electrical shock: under 1/3, • Risk of Radiation: none, • Work with explosives: none, • Vibration: none PHYSICAL DEMANDS The frequency to physical demands are listed below: • Stand: over 2/3, • Sit: under 1/3, • Walk : over 2/3, • Use hands to finger, handle, or feel: over 2/3, • Reach with hands and arms: over 2/3, • Climb or balance: 1/3 to 2/3, • Stoop, kneel, crouch, or crawl: over 2/3, • Talk or hear: over 2/3 LIFTING OR FORCE EXERTED The frequency to lifting or force exerted are listed below: • Up to 10 pounds: over 2/3, • Up to 25 pounds: 1/3 to 2/3, • Up to 50 pounds: under 1/3, • Up to 100 pounds: none. Associates are required to request for assistance in carrying heavier items, especially over 100 pounds

Job Description WHY JOIN THE AMES COMPANIES We have amazing Benefits! Medical, Dental, Vision, Life Insurance, Wellness, 401K, Holidays Employee Assistance Program, Vacation Days, Disability, and much more. WHO WE ARE The AMES Companies, headquartered in Lake Nona-Orlando, FL has a rich American history. The AMES story goes back to 1774, when Captain John Ames began making America’s first shovels. AMES® brand is the third oldest consumer brand in the country, and its tools helped build America for more than two hundred years. You can learn more about our history here. Our business lines include Home Organization, Lawn and Garden Tools, Outdoor Living, and Cleaning Tools. Our leading global brands are sold to homeowners and professionals involved in new construction, remodeling, and maintenance activities. To learn more about our business lines, visit our website: https://www.homebyames.com/en-us/. WHO YOU ARE The Distribution Operator 4 - Trainer is responsible for operating a forklift, electric pallet jack, reach truck, other material handling equipment for the purpose of moving, locating, relocating, stocking and counting merchandise in accordance to production standards. All associates must be able to cross train in all core distribution functions including unloading, put away, picking, replenishing, loading, small parcel area, rework, returns, display building, and possess basic WMS skills. WHERE YOU WILL WORK This is an on-site position, working at our Reno, NV facility Monday through Friday. RESPONSIBILITIES Perform required Distribution Operator 4/Trainer duties and core distribution functions including partial picking, full picking, loading, unloading, replenishment and put away, also including hand unloading import containers and assisting with projects as assigned. • Ensures the hand-held terminals are maintained and fully charged, ready to update and download in a timely manner, • Ensures that all receiving and/or shipping data entry is completed. Takes daily counts of inventory and assures mis-picks are accounted for., • Prepares all shipping and/or receiving documents accurately and in a timely manner, • Schedules inbound and/or outbound appointments with carriers, • Document any and all discrepancies with paperwork on inbound and/or outbound shipments, notify supervisor on discrepancies, • Strong computer skills and the ability to multitask, • Strong communication skills for internal and external customers, • Regularly performs job duties at a rapid pace, • Follow all safety policies & procedures; including, but not limited to wearing all required personal protective equipment (PPE). REQUIREMENTS • At least two of the three stand up forklift certifications (walkie rider, pacer and or reach truck), • RF scanning device experience and/or training or equivalent combination of training and experience, • Must pass and maintain industrial lift truck certifications ENVIROMENTAL/PHYSICAL REQUIREMENTS Physical demands described here are representative of those that must be met to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. • While performing the duties of this job, the employee is regularly required to stand on concrete floor with/without floor mats; and use hands to finger, handle, or feel; reach with hands and arms (which may include above and/or below shoulders); bend, stoop, kneel, crouch, or crawl and talk or hear. The employee is regularly required to use left and/or right hand for simple grasping; fine work, pushing/pulling and fast paced assembly. The employee is occasionally required to walk, climb or balance. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds with assistance. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts; high, precarious places and vibration. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals and risk of electrical shock. The noise level in the work environment is usually moderate to loud. WORK AUTHORIZATION The AMES Companies will only employ those who are legally authorized to work in the United States. The Company does not currently sponsor immigration visas for this role.

Job Description Pay range: Entry level/Level 1: $28-32/hour While working under the supervision of a Team Leader, and within the scope of a written Safe Work Plan (aka Job Hazard Analysis), the platform technician carries out complex composite repairs for wind turbine blades as well as a wide variety of inspection, maintenance, and upgrade services in the field setting. The Technician may use blade access platforms of any size or configuration, or “Bronto Skylift” with related equipment to access and complete work tasks at considerable height. The Technician may also participate in rescue operations, administrative tasks, and customer support. Work hours, locations, shift times, and nature of work assignments are not guaranteed and can vary greatly. Travel is extensive, and time away from home can span several weeks at a time. Safety, integrity, technical capabilities, customer service, and an ability to function effectively in a team environment are essential. MAJOR RESPONSIBILITIES/ACTIVITIES: • Carries out a wide variety of inspection, maintenance, and repair services using blade access platforms or “Bronto Skylift” trucks and related equipment to access and complete work tasks at considerable height., • Represents MISTRAS in a positive and professional manner at all times, regardless of adversity., • Provides exemplary customer service and support (internal and external) that reflects integrity, collaboration, and timely follow-through., • Works effectively within a team structure to complete operational and administrative assignments on time, with good quality., • In accordance with MISTRAS safety procedures, reflects an intense focus on safety, health, and risk management concerns and takes pride in safeguarding self and others during each job assignment., • Adheres to MISTRAS procedures for all “at height” projects., • Serves as a safe, effective and valued member of the team as gauged by periodic assessments. Customer feedback may also be taken into account., • Adheres to the scope and technique standards based on level of certification., • Punctual, prepared, and ready to work at the designated start time for each shift., • Completes all training assignments on time and with satisfactory performance ratings., • Follows Company policies, procedures and work instructions at all times., • Meets the availability and attendance standards established by the Company., • Other duties and responsibilities as assigned and as outlined in company policies, procedures, and directed work practices. MINIMUM REQUIREMENTS: • High school graduate or GED. Relevant bachelors and advanced degrees are an asset., • At least one year of wind blade composite repair experience preferred., • At least three years of general work experience preferred., • Meets the Company’s first-aid, CPR, and AED certification requirements at time of hire or within 60 days thereafter. Current team members must maintain certification at all times., • Valid driver’s license within the state of primary residence, without restrictions, and possession of a valid Passport or the ability to obtain one within 90 days., • Able to travel by any means (air, rail, ship, ground, etc.), without geographical limitations (county or state boundaries, international travel, etc.) or any other restrictions that might interfere with logistics. ESSENTIAL PHYSICAL FUNCTIONS: • If assigned by the Company, must undergo and successfully pass medical clearance examination(s), physical agility test(s), and/or functional capacity test(s) administered by Company-approved clinicians., • Capable of carrying out strenuous, repetitive, or tedious work often in adverse conditions (heat, cold, wind, extreme height, darkness, etc.) and often for extended periods of time., • Frequent carrying, pushing, and pulling motions while completing work tasks or managing tools/equipment is to be expected. Frequent lifting up to 30 lbs and occasional lifting up to 60 lbs without assistance., • Work tasks can be particularly stressful to fingers, hands, wrists, elbows, shoulders, neck and spine., • Repetitive hand and finger manipulation tasks, most often while wearing protective gloves., • Repetitive use of hips, knees, ankles, and feet while operating rope systems, using industrial ladders, or moving around work sites., • Must possess adequate near and distance vision, hearing, and speaking ability. MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. #LI-AB1 Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description JOB SUMMARY The Department of Public Works (DPW) Fuel Tracker will ride along on deliveries to accurately track and log all diesel and gasoline fuel distributed from an assigned fuel vehicle. They will assist the Fuel Truck Driver to efficiently and safely navigate their route and communicate via radio with DPW Mobile Fuel Dispatch regarding daily delivery updates. As needed, they will act as a traffic guard, maintaining an awareness of surroundings and participant movement. This temporary, ineligible for benefits role is: • From August - September: Full-Time, Non-Exempt, based on-site out of Black Rock City, Nevada. The deadline to apply for this role is 5:00 pm Pacific on June 29th. DUTIES & ESSENTIAL JOB FUNCTIONS Daily Operations & Maintenance (50%) • Assist the driver in following daily fuel delivery routes as assigned by DPW Mobile Fuel Ops Management, ensuring safe and efficient mobile fuel delivery to infrastructure, artists, and theme camps., • Provide daily reports to DPW Mobile Ops Management regarding total fuel distribution, safety issues, or concerns with fuel users., • Facilitate safe mobile fuel delivery and adhere to safety standards set by DPW and OSHA guidelines., • Proactively prevent fuel losses by following procedures and guidelines laid out by DPW Fuel Management., • Participate in Team Meetings and maintain related correspondence. Documentation & Tracking (45%) • Accurately and completely record and reconcile all daily fuel fills in tracking paperwork and the Fulcrum app in a legible manner., • Prepare written feedback for the DPW Utilities Manager describing the successes of the season, areas in need of improvement and suggestions with the purpose of improved overall efficiency for the next year; Submit an end-of-season EMBER Report. Other Functions and Responsibilities (5%) • Maintain clear and respectful communication with the DPW Fuel Team, BRC Departments, Vendors, Participants, and Artists., • Participate in the execution of crew LNT and Waste disposal plans., • Participate in the maintenance of a clean and safe worksite using only OSHA-approved safety equipment., • Read, understand, and abide by the rules and codes of conduct according to the Burning Man Staff policies, protocols, and behavioral standards., • Monitor personal well-being, be aware of work expectations, and proactively address any concerns with manager., • Perform various other duties as assigned by or discussed with DPW Fuel Management. LEARNING AND TEACHING • Documentation - Assists in the creation, publishing, and maintenance of process documentation related to their assigned duties., • Knowledge sharing – Helps acculturate and educate junior staff in Burning Man culture and business processes., • Training development - Collaborates with the education team to develop training materials in their area of expertise, as requested., • Learning – Pursues ongoing learning in their area of expertise, working to stay current on emergent knowledge, skills, and processes. QUALIFICATIONS Required • Able and willing to follow standards set in necessary training that can be provided on-site:, • Liquid fuel handling, • Completed DPW Liquid Fuel Operations packet, • Accurate use of handheld digital devices for tracking needs, • Working knowledge of OSHA-compliant personal protection equipment, first aid kits, and fire extinguishers., • Must have been to Burning Man and be familiar with the event worksite, Black Rock City and its departments., • Capable of climbing a ladder and safely traversing the top of the fuel storage tanks; Able to drive safely and navigate Black Rock City streets that are congested with pedestrians, bicycles, and mutant vehicles., • Capable of entering and exiting a vehicle numerous times during each shift., • Expert in handling data entry with attention to accuracy; highly organized, able to prioritize, and motivated with the ability to adhere to a strict schedule., • Operates with a high level of behavioral integrity, confidentiality, and discretion of sensitive information; maintains tidiness in work ethics and the work environment, and remains calm and focused under pressure., • Proficient at navigating digital and online technology; Able to proactively engage in learning existing online applications, tools, systems, maps, and documents., • Able to maintain consistent organization and tidiness in the work environment and in handling important relevant information (ie, tracking, personnel data, goals and timelines, payroll, etc.), • Clear, service-oriented, and professional communication, verbal and written. Experienced with using 2-way radios and following radio protocol., • Capable of working in an extreme environment including drastic temperature changes, high winds, poor air quality, and low to no visibility at times., • Ability to temporarily relocate for work at the Burning Man event held in Gerlach, Nevada. Preferred • It is helpful if the candidate has been to Burning Man and is familiar with the event worksite, Black Rock City and its departments., • Experience working in remote wilderness and/or desert environments., • Familiarity with email, reading spreadsheets, and maps., • OSHA 10 Certification (May be earned through in-house training)., • First-Aid knowledge., • Preferred to have a valid Driver’s License and a good driving record. Note: If you have gained the necessary experience to succeed in this role and have acquired this experience in other ways, we encourage you to apply and share all relevant experience in your application. REQUIRED LICENSES/CERTIFICATIONS N/A COMPENSATION Individual compensation decisions are dependent on a variety of factors, including prior experience and geographical location. The anticipated rate for this position: • From August - September is $15.00 to $16.50 per hour. PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • On-playa: This position requires periods of heavy lifting, bending, kneeling, squatting, and climbing. This position will be physically demanding, and requires individuals with good physical health, and endurance. Work will include the need to find and meet with department representatives who may not be in the vicinity, therefore this could include walking or using some form of transportation. Much of the work will be in outside weather conditions and will be exposed to fumes or airborne particles as well as possible extremes in temperature. NOTICE FOR ALL APPLICANTS: • Burning Man Project celebrates the importance of creating a diverse environment and enthusiastically encourages Black, Indigenous, Peoples of Color, LGBTQIA+, Immigrant, women, and people with disabilities, of all ages, to apply., • Burning Man Project provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training., • Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Powered by JazzHR tZHuWL9S1J

Job DescriptionDescription: Why join us? Our Vision – To provide outstanding garage door repair service, complete customer satisfaction and a program that rewards excellence from our franchisees, technicians, and staff. Our Mission – To establish Precision Door Service as the public standard and national household name in garage door repair service. Our Values – Culture, Reliable People, Career Oriented, Industry Standard Training and Safety, Competitive Salaries & Benefits, Garage Door Leaders The Garage Door Technician serves as the sales and service technician for garage doors, garage door openers, and related components. The technician provides multiple alternative recommendations for repair and replacement of necessary parts for garage doors. He or she will sell appropriate services or replacement options. The technician will interact with customers daily providing them with excellent customer service. Most residential service work is done on existing garage doors and opener systems. Work assignments are received from the call center or Customer Experience Specialist (CXS.) Any problems, questions, or issues will be referred to the Branch Manager for clarification or resolution. The Garage Door Technician is the first line of support for customers and is expected to maintain a neat and clean appearance and to treat all customers with decency and respect. Key Responsibilities: • Repair garage door service upon request., • Provide estimates for remodel and repair bid requests., • Attending and participating in all required safety meetings and training sessions., • Learning the basics of track alignment, track adjustment, adequate back hangs, operator arm, photo eye setting, and other door and operator repairs., • Learning basic door and operator maintenance skills and reviewing new products when appropriate., • Retaining an appropriate level of product knowledge for products offered., • Ensure all scheduled work is performed to the customer’s satisfaction and resolve issues or problems., • Reviewing Work Order/Invoice information for accuracy and completeness before departing the job., • Collection of payment for services rendered at time of job completion., • Promote Precision Door Service products and services wherever possible., • Ensure truck is fueled, serviced, and ready for operation prior to beginning of workday., • Ensure truck is restocked with appropriate service material daily., • Assisting in unloading of trucks when needed., • Maintain timecards for compensation through the company’s payroll software for accurate record keeping of time worked., • Perform a variety of secondary support tasks as requested by the Branch Manager Requirements: • Knowledge of materials, methods, and tools involved in the installation of garage doors, openers, and related components., • Knowledge of principles and methods for showing, promoting, and selling products or services to include marketing strategy and tactics, product demonstration, sales techniques, and sales control systems., • Skill in using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems., • Ability to take accurate measurements and estimate the materials needed., • Ability to provide excellent customer service by assessing customer needs, meeting quality standards for services, and evaluating customer satisfaction., • Ability to identify mechanical problems and review related information to develop and evaluate options and implement solutions., • Ability to identify specific brands of doors, openers, keyless entry systems, and related components., • Ability to close sales deals., • Ability to establish and maintain effective and cooperative working relationships with those contacted in the course of the work., • Ability to follow complex instructions and communicate effectively orally and in writing., • Ability to organize work for timely completion., • High school diploma or GED; supplemented by garage door experience, preferably in sales, installations, and repairs., • Proven sales experience closing deals directly with customers, preferably in the garage door industry., • Able to work a flexible schedule including weekends, holidays, and evenings to accommodate phone calls from customers., • Must be able to sit for extended periods of time (driving and travel time.), • Must possess a current valid driver’s license. Core Competencies • Customer-focused and Customer Service Orientation – Works with clients and customers to assess their needs, provides information or assistance, resolves their problems or satisfies their expectations; knows about available products and services; is committed to providing quality products and services; honors all of the franchise’s commitments to customers by providing helpful, courteous, accessible, responsive, and knowledgeable customer service., • Effective Communications – Practices meaningful two-way communication by speaking clearly, paying close attention and seeking to understand others, listening attentively and clarifying information attending to nonverbal cues, and responding appropriately; influences and ensures support for proposed ideas., • Service Focus and Teamwork – Values and delivers high quality, professional, responsive, and innovative service while cooperating with others to accomplish common goals; works with others within and across the company to achieve shared goals; treats others with dignity and respect and maintains a friendly demeanor; values the contributions of others., • Interpersonal Skills – Shows understanding, friendliness, courtesy, tact, empathy, concern, and politeness to others; develops and maintains effective relationships with others; may include effectively dealing with individuals who are difficult, hostile, or distressed; relates well to people from varied backgrounds and different situations; is sensitive to cultural diversity, race, gender, disabilities, and other individual differences., • Job Mastery and Continuous Learning – Takes steps to develop and maintain knowledge, skills, and expertise necessary to achieve positive results; participates fully in relevant training programs and actively pursues other opportunities to develop knowledge and skills., • Sales Skills - Excels in prospecting and lead generation, identifying opportunities and leveraging outreach strategies to engage potential customers; a consultative selling approach to align solutions with customer needs, while negotiation and closing skills help secure deals and foster long-term partnerships. Working conditions • Tasks are regularly performed inside and/or outside with potential for exposure to adverse conditions, such as dirt, dust, pollen, odors, fumes and/or poor ventilation, wetness, humidity, rain, temperature, and noise extremes, machinery and/or moving vehicles, vibrations, electric currents, animals/wildlife, toxic/poisonous agents, gases or chemicals, oils and other cutting fluids, violence and/or disease, or pathogenic substances. Physical requirements Depending on the functional area of the assignment, tasks involve the ability to medium to heavy work. As a technician, you must be able to lift up to 100 lbs. and carry up to 50ft. Physical efforts usually involve lifting, *This is a commission-based role with an average earning potential of $80,000–$140,000 per year. Actual earnings are based on individual performance and a variable commission rate of 15%-17% on net sales. Paid training is provided during the first 12 weeks to ensure your success at a pay range of $20.00 to $22.00. Training pay offered may vary depending on geographic region, internal equity, job-related knowledge, skills & experience, among other factors. At Precision, we invest in our team with comprehensive benefits, including medical, vision, and dental coverage, plus a 401(k) for eligible positions. Our company's pay period is Sunday through Saturday, with WEEKLY payroll! That means payday is EVERY Friday!

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discounts, • Health insurance, • Paid time off, • Training & development, • Vision insurance Entry Level Tire Technician for a Locally-Owned Retail Tire Store and Service Center. NO EXPERIENCE NECESSARY, WE WILL TRAIN RIGHT CANDIDATE Full time regular; 40 hours per week, Monday-Saturday - Overtime Possible We offer a matching 401K, health insurance, paid holidays and time off, on the job training, a friendly, family oriented work environment, and all you need to be successful. Join our team today! POSITION SUMMARY Entry-level Tire Technicians needed for busy family owned shop with a friendly, professional work environment. We will train the right candidates, and advanced training for those starting their automotive career available. As a Tire Technician, you will be responsible for servicing and performing maintenance of tires and wheels, oil changes, and other basic vehicle maintenance in an accurate and timely manner. You are honest, have a solid work ethic and high motivation. ESSENTIAL DUTIES AND RESPONSIBILITIES • Mounting and dismounting automotive tires, • Installing new wheels, • Attaching and re-balancing wheels, • Repairing, rotating, and inflating tires, • Performing oil changes or any type of flushes and maintenance, • Calibrating TPMS, • Inventory stocking, • Participating in training & follows safety procedures, • Testing and installing batteries, • Test-driving vehicles after maintenanceQUALIFICATIONS, • Valid driver's license, • Must be at least 18+ years old, • Must be flexible in scheduling and able to work overtime as needed during hours shop is open. Shop hours Monday-Friday are 7:30am-5:00pm; and Saturday are 8am-4pm., • Ability to learn new concepts and use technical materials, • Ability to move and lift up to 60 poundsWork Remotely, • No

Completes daily, weekly and monthly checklists on building equipment maintenance procedures and maintains records of scheduled maintenance procedures. Responds to emergency maintenance requests as required. Performs minor electrical maintenance to include but not be limited to replacement or repair

Exposure to high noise level (ear protection may be required in some areas).

The statements in this job description are intended to describe the general nature and level of work being performed by people assigned to this work.

Exposure to high noise level (ear protection may be required in some areas).

Warehouse Associate La-Z-Boy Furniture Galleries.La-Z-Boy is hiring one exceptional full-time Warehouse Associate for our store in Reno, NV.This is much more than your average warehouse associate job, you will be working alongside our Sales Associates, Designers and Store Manager as part of a high-

Exposure to high noise level (ear protection may be required in some areas).

Warehouse Associate And Forklift.We are seeking a skilled Forklift Operator to join our dynamic team in a fast-paced warehouse environment.The ideal candidate will have experience in warehouse distribution and be proficient in operating various types of heavy equipment, including forklifts and palle

Exposure to high noise level (ear protection may be required in some areas).

Now Hiring Swing Shift Warehouse Crew Member.We are currently seeking reliable and motivated individuals to join our Swing Shift Warehouse Crew in a food production environment.This is a great opportunity for candidates looking for steady, full-time work with long-term potential.Job Description: Ke

We are the leader in professional hair color, selling and distributing professional beauty supplies across 11 countries through our Sally Beauty and Beauty Systems Group businesses.Sally Beauty offers products for hair color, hair care, nails, and skin care to retail customers looking for salon qual

Logistics & Warehouse Associate - Data Center.CBRE has a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disabil

Exposure to high noise level (ear protection may be required in some areas).