Environmental engineer jobs in Syracuse, New YorkCreate job alerts

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: * Define and develop RF system architectures for radar and advanced sensing applications. * Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. * Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. * Conduct trade studies and system optimization to balance performance, cost, and schedule. * Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. * Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. * Perform root cause analysis of system performance issues and recommend design changes. * Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. * Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. * Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. * Demonstrated experience deriving and validating system-level RF budgets. * Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. * Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. * Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. * Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). * US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: * Experience in phased-array architectures and beamforming. * Knowledge of military/aerospace standards and environmental testing. * Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription Lead Projects. Mentor Talent. Build the Future. Are you a skilled transportation engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Highway Department and take a leading role in the design and execution of critical transportation projects across New York State. In this role, you’ll manage projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in highway design modeling and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the region’s most impactful infrastructure efforts: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s degree in Civil Engineering or a related field., • Licensed Professional Engineer (PE) in New York State, • Minimum 8 years of experience in transportation design, with a strong focus on NYSDOT/Federal Aid projects, • Proficiency in AutoCAD/Civil 3D and MicroStation/OpenRoads, • Estimated Salary Range: $97,760 - $120,640/year* WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Energy who excels by transforming complex customer requirements into actionable, data-driven solutions across HVAC, controls, central plant optimization, and integrated energy systems. You lead projects from early concept through design, pricing, and performance validation-leveraging modeling, analytics, and real-world constructability insight to ensure every solution is technically sound, financially viable, and executable in the field. You collaborate seamlessly with Sales, Engineering, and Operations to protect margin, reduce risk, and deliver high-performance building outcomes. Through mentorship, strong communication, and technical leadership, you elevate both project delivery and overall team capability. What are we looking for • Associate degree required; Bachelor's preferred in engineering or related discipline., • 10+ years delivering building infrastructure, energy efficiency, or distributed energy resource projects., • Experience leading technical teams and managing cross-functional coordination., • Expert-level ability in energy modeling, building analytics, load studies, utility consumption analysis., • Deep understanding of HVAC systems, central plant optimization, and building automation controls., • Experience developing performance guarantees, feasibility studies, and detailed design documentation., • Familiarity with M&V practices and IPMVP protocols., • Skilled in evaluating engineering designs for constructability, cost, lifecycle value, and performance risk., • Proficiency with Microsoft Office; experience with industry software tools for modeling, analytics, and design., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Mechanical who excels by transforming mechanical system requirements into high-performance, energy-efficient, and fully integrated building solutions. You lead projects from conceptual design through construction support and commissioning, applying deep technical expertise in HVAC, hydronics, central plant systems, and air distribution to ensure every design is safe, code-compliant, and optimized for long-term reliability. You thrive at bridging early pre-construction solutioning with detailed engineering and field execution-collaborating across mechanical, electrical, structural, controls, and architectural teams to deliver systems that perform as designed in the real world. Through technical leadership, clear communication, and mentorship of engineering and design staff, you elevate project quality, improve constructability, reduce risk, and strengthen Stark Tech's reputation for delivering high-performance mechanical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in mechanical building systems or energy-driven infrastructure projects., • Proven experience leading projects and managing engineering or cross-functional teams., • Expertise in HVAC system design, load calculations, equipment selection, air and fluid distribution, and central plant systems., • Experience defining sequences of operation and integrating mechanical systems with BAS platforms., • Proven ability to conduct system retrofits, upgrades, and performance optimization analyses., • Thorough knowledge of applicable codes, safety standards, and environmental/regulatory considerations., • Skilled in creating Basis of Design documents, narratives, specifications, and construction documentation., • Experience coordinating mechanical designs with electrical, structural, controls, and architectural teams., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description We are currently hiring an entry level Environmental Scientist/Geologist/Engineer in our Environmental division at our Syracuse office. The Environmental Scientist/Geologist/Engineer will support Phase I and II Environmental Site Assessments, environmental investigation and remediation projects at sites with contamination by materials such as solvents, petroleum fuels, metals, and PCBs. You have the opportunity to join a dynamic team working on large, technically engaging, and impactful projects. A successful candidate will be able to perform various tasks including field work, soil and groundwater sampling, drilling supervision, reporting, writing, and support project managers on various projects. Duties • Soil and groundwater sampling, • Field Activity Supervision, • Drilling Supervision, • Report Preparation Salary Range: $24 - $26 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 0-5 Years of experience required /preferred, • BS in Environmental Science, Engineering. or Geology preferred, • MS Office Suite, • Strong communication skills, • 40 Hour OSHA Hazwoper Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o Flexible Work Schedule o Health/Dental Insurance o 401k Plan with Employer Match o Short & Long Term Disability o Profit Sharing o Paid Time Off o Leadership Development Program o Fitness Reimbursement o Tuition Reimbursement o Referral Bonus Program o Wellness Program o Team Building Events o Community Service Events

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain accurate records of project details, including design documents, progress reports, and budget information., • Participate in project planning meetings, coordinating tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure compliance with safety codes, design standards, and regulatory requirements., • Conduct field inspections and prepare detailed bridge and culvert inspection reports., • Provide technical support during construction: respond to RFIs, conduct site visits, and ensure design integrity., • Collaborate with internal teams, subconsultants, regulatory agencies, and clients to ensure seamless project delivery. Your Impact Matters, Your Career Thrives. Work on engaging bridge engineering design projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Health insurance-Medical, Dental & Vision, • 401(k) plan, • Company-paid life and disability insurance, • Hybrid work schedule, • Generous PTO, • Strong work-life balance, • Shareholders program, • A comprehensive range of benefit options to support your well-being, financial security, and peace of mind. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) or ability to obtain it., • Experience with MicroStation, STAAD, Bridge Design Software programs preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure designs adhere to state and local standards, regulations and safety codes., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design, • Provide technical support during construction, respond to RFIs and attend site visits., • Provide technical support during construction, respond to RFIs and attend site visits., • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Project Engineer • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials., • Support Project Managers and Designers throughout the project lifecycle. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural engineering experience, • Concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: A Bridge Engineer– Civil/Structural Full-Time | Hybrid Syracuse, NY Launch Your Career & Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career bridge engineer looking to gain hands-on experience in infrastructure design? Fisher Associates is seeking a Bridge Engineer I or II (Civil/Structural) with 0–5 years of experience to join our collaborative Bridge and Transportation team. In this hybrid role you’ll work on impactful bridge design and transportation infrastructure projects that improve safety and mobility in the communities we serve. This is an exciting opportunity to launch your engineering career with mentorship, professional development, and a clear path to PE licensure. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to take ownership of projects, prioritize effectively, and thrive in a dynamic, fast-paced environment., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Transportation Highway Group Manager – Civil Engineering Syracuse, NY/ Hybrid Lead with Purpose. Design What Moves Communities. Fisher Associates is hiring a Transportation Highway Group Manager, an experienced Civil Engineer to lead the technical design of impactful highway and roadway projects across Upstate New York. If you're driven by engineering excellence, mentorship, and meaningful work, this is your opportunity to grow and make a difference. In this senior technical role, you’ll guide design development, ensure high-quality deliverables for clients like NYSDOT and local municipalities, and mentor junior engineers within a collaborative team environment. At Fisher Associates, we value innovation, integrity, and leadership. Join a firm where your skills are recognized and your career can thrive. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Deliver transportation projects that improve mobility, safety, and quality of life in local communities., • Foster a high-performing, motivated team through clear expectations, constructive feedback, mentoring, and career development., • Oversee the design and execution of highway engineering projects, ensuring compliance with industry standards, regulations, and client requirements., • Serve as a technical lead, guiding the team on best practices, decisions, and troubleshooting as needed., • Implement and oversee quality control processes and conduct technical audits to ensure high standards., • Maintain effective communication with project managers, clients, and cross-functional teams., • Ensure effective resource allocation, adequate staffing, and utilization to meet project and team goals., • Assist in recruiting top engineering talent who align with the team’s technical excellence and company culture., • Lead continuous improvement initiatives to enhance team performance., • Stay current with transportation design trends and emerging technologies, integrating them into project solutions. Your Impact Matters, Your Career Thrives. Work on engaging transportation projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Transportation Group Highway Manager • B.S. degree in Civil Engineering, • 8-15 years’ experience in civil transportation engineering, • Professional Engineering License (PE) preferred or ability to obtain it, • Prior staff management preferred, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionSalary: Title: Staff 2 Engineer/Scientist Location: Syracuse, NY Job Type: Regular Full-Time Whats the Opportunity? Anchor QEA is seeking a full-time scientist or engineer to join our offices in Syracuse, NY, or Bellingham, WA. The applicant will have 0-5 years of experience providing technical contributions to projects, using code to analyze environmental datasets, and supporting the development of mathematical (environmental) models. Successful candidates will have an opportunity to work on a variety of tasks of differing complexities, both independently and in team environments, and learn directly from leaders in the industry. We are interested in a candidate that has the capacity to grow, is a quick learner, is detail-oriented, is a committed team player, has a strong interest and experience in computer coding and related technologies, and possesses strong written and verbal communication skills. Responsibilities: • Analyze and interpret environmental data using statistical, coding, and visualization tools including R and Python., • Develop and apply mathematical models, including preparing inputs, processing outputs, interpreting and presenting results, and communicating findings to technical and nontechnical audiences., • Support internal software and data resource development by becoming proficient in existing scripting tools and contributing to the design and maintenance of new tools, processes, and code libraries., • Assist with the preparation of technical documents, including sampling and analysis plans, remedial investigation and feasibility study reports, and data summaries., • May participate in field assignments for environmental sampling (soil, sediment, groundwater, and surface water), equipment calibration, and data collection; fieldwork may account for up to 25% of time and include travel. What Are We Looking For? Ideal candidates will have the following: • Bachelors or Masters degree in environmental science, environmental or civil engineering, computer science, chemistry, mathematics or a related field (Masters preferred), • 0 to 5 years of relevant professional experience, • Proficiency in one or more scientific computing languages (e.g., Python, R, MATLAB, Julia, C/C++, Rust) and related libraries such as Matplotlib, Tidyverse, NumPy, or Pandas, • Familiarity with software development concepts such as DevOps, CI/CD, cloud computing, API integration, or open-source collaboration, • Experience in applying statistical analysis and environmental modeling methods, particularly for contaminant fate and transport in aquatic systems, • Exposure to in-water and upland remediation projects, including environmental sampling, data analysis, and feasibility studies; experience with contaminated sediments preferred, • Strong technical writing skills for planning documents and regulatory reports, • Proficiency in Microsoft Office applications, • ArcGIS experience a plus, • Critical thinking and strong problem-solving skills, • Strong written and verbal communication skills, • 40-hour HAZWOPER certification (preferred; may be provided upon hire), • Ability to travel for field projects (up to 25%, depending on location and project needs) What Can You Expect? A collaborative work environment where we encourage everyone to bring their authentic self. We offer competitive compensation and benefits. Benefits detailed below. Who Are We? Anchor QEA provides environmental planning, science, and engineering consulting services with the mission of transforming our environment and communities with integrity and vibe. With more than 500 people in offices across the United States, our collective vision is to be an inclusive, sustainable, and growing environmental innovator making generational impacts. By embodying our core values, we strive to be our clients first choice for solving their most challenging problems and to be our employees reason to be excited about going to work each morning. Learn more about Anchor QEA at . How to Apply? Apply online through Anchor QEAs Open Positions page at . Veterans are encouraged to apply. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to Additional Information We work hard to embrace diversity and inclusion. As an equal opportunity employer, Anchor QEA is committed to a diverse, multi-cultural work environment. Anchor QEA does not discriminate in employment based on age, race, creed, gender, religion, marital status, veterans status, national origin, disability or sexual orientation. Employment is contingent upon satisfactory results of a comprehensive background check. Salary and Other Compensation: • Salary Range: 72,000 - $80,000, • Annual Bonus, • Other potential bonus types: Billable Time Bonus, Spot Bonus, Milestone Anniversary Bonus, Receiving Professional License/Certification Bonus, Peer-reviewed Publication Bonus, Employee Referral Bonus. Base Level Benefits for Regular Full-Time Positions: • Healthcare: Medical, dental, vision, basic life and AD&D insurance, • Paid Company and Floating Holidays: 7 paid company and 2 floating holidays annually, • Vacation: 2 weeks accrued paid vacation based on length of service. Vacation may vary by level., • Sick and Safe Time: 80 hours annually

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s)., • Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 5 years related experience, or similar position with experience in the construction field and transportation projects., • NICET Level III certification or successful completion of Fundamentals of Engineering exam required. Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Challenging Bridge Projects. Grow your Career. Build the Future. Are you a skilled bridge engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking an entry-level Bridge Engineer to join our Syracuse Bridge Department and help us deliver some of the largest and most complex infrastructure projects in Upstate New York. Our Bridge team is expanding, and we’re excited to offer you the opportunity to be part of the largest bridge program in our team's history. With active projects in nearly every county across the region, you'll play a key role in shaping critical infrastructure. We proudly serve a diverse range of clients, including NYSDOT, NYSTA, and numerous counties, cities, and villages throughout New York State. This unprecedented workload not only brings meaningful technical challenges to keep you engaged and learning, but also opens the door to unlimited career growth. If you're looking to make a real impact while advancing your professional journey, there's never been a better time to join us. In this role, you’ll support bridge engineering projects from initial planning and design through construction support. Working under the guidance of senior engineers, you’ll contribute to structural analyses, prepare design documents, and assist with field inspections. You’ll bring a strong foundation in civil or structural engineering, a willingness to learn, and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the most impactful infrastructure efforts in Upstate New York: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Bridge Design: Work on every aspect of bridge design projects, including inspection, structural calculations, geometry layout, plan development, and construction coordination., • Project Development: Assist in progressing bridge projects through the design process, including report writing, environmental permit coordination, and development of contract specifications., • Bachelor’s degree in Civil Engineering or a related field., • 0-3 years of experience in bridge design, • Proficiency in AutoCAD/Civil 3D and/or MicroStation/OpenRoads Estimated Salary Range: $73,424 – $92,352* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Job Title: Electrical Engineer Reports To: Maintenance Manager FLSA Status: Exempt Supervisory Responsibilities: No – Individual Contributor Essential Job Functions and Responsibilities: • Electrical engineer must have a strong understanding of electrical manufacturing processes., • Must be able to read, write and analyze electrical schematics and wiring diagrams., • Electrical engineer must have a broad knowledge of electrical principles, wiring specification codes and handbook formulas along with a working knowledge of PLC’s, VFD’s, Motor Control, and Power distribution., • Electrical engineer must have the capacity to analyze a problem from multiple perspective and explore creative solutions., • Must be able to devise testing methods and properties to confirm the functionality of electrical components and systems., • Determines proper type, size of materials and equipment for the job, including power requirements., • Performs electrical work requiring high degree of trade skill to install, test, inspect, adjust, repair and wire all plant equipment and circuits to required voltages and tolerances., • Able to locate, diagnose and remedy troubles quickly to avoid shutdowns and able to adjust all plant equipment to proper operating characteristics., • Fabricates material to be used for electrical equipment., • Performs other related duties as assigned. Required Skills or Abilities: • Ability to work individually or collaboratively on a team., • Utilize precision devices such as voltmeters or other measuring instruments., • Strong organizational skills and attention to detail., • Possesses time management skills with a proven ability to meet deadlines., • Proficient with Microsoft Office Suite or related software. Physical Requirements: • Requires work such as sitting at a desk and computer for periods of time, standing or walking up to 8 hours at a time on hard surfaces., • Must be able to traverse manufacturing plant and warehouse to access a variety of storage spaces and shelving units by stretching, squatting, and/or reaching., • Work is performed in a manufacturing plant with some exposure to environmental factors such as loud noises, odors, variances in temperature or weather and other factors., • Must be able to lift 25 pounds at times without assistance, up to 50 pounds with assistance. Education and Experience: • Requires a bachelor’s degree in Industrial Electrical Engineering or an alike field., • 5-10 years industrial electrical and/or mechanical experience.

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities • Ability to motivate and mentor junior staff., • Project management, communication and multi-tasking skills., • Ability to work with internal and external staff on an individual and team basis., • Ability to challenge one’s self and broaden knowledge base., • Bachelor's of Science or Technology in Electrical Engineering, • 5-10 years of related experience, • PE preferred, FE required, • Experience with the National Electric Code., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash., • Experience with the layout and design of low voltage building distribution systems. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Geotechnical Engineer – Nationwide Opportunities Earth Systems, LLC – part of EnviroTech Holdings (Earth Systems, EnviroTrac, EnviroTactics, Spangler Environmental, Bio-Tech Consulting, Earth Systems Response & Restoration) Looking for a career where your expertise actually makes an impact? At Earth Systems, we’re not your typical environmental consulting firm. With 30+ locations nationwide, our teams of scientists and engineers tackle geotechnical and environmental challenges head-on—combining technical know-how with practical solutions that matter. Position Overview We’re looking for a Geotechnical Engineer who knows the consulting world—someone who’s worked with firms providing Geology, Environmental Science, and Environmental Engineering services. If you thrive in a fast-moving, multidisciplinary environment, this role will give you the chance to lead from the field and solve real-world problems head-on. You’ll take charge of project leadership across multiple regions, using your technical expertise and practical mindset to deliver results that matter. The ideal candidate will hold a PE license and bring proven experience in the environmental consulting industry, with the confidence to step into a leadership role and the drive to make an impact. What You’ll Do * Lead geotechnical investigations and in-situ testing * Deliver foundation design, slope stability, and settlement analysis recommendations * Write and present clear, actionable reports for clients * Scope, budget, and manage projects with support from a collaborative team * Oversee fieldwork and lab testing to ensure QA/QC * Partner with clients, regulators, and project teams to keep work on track * Mentor junior staff and share your expertise What We’re Looking For * Bachelor’s degree in Geotechnical Engineering, Geology, Environmental Engineering, or related field (Master’s a plus) * 5+ years of experience in geotechnical or applied environmental consulting * PE license or EIT with the ability to obtain licensure in the state of hire within 12 months * Proficiency in AutoCAD, gINT, GeoStudio, or similar software * Strong writing skills and experience preparing technical reports * Willingness to travel to project sites within your region What We Offer * Competitive salary and full benefits (medical, dental, vision, life) * 401(k) with company match * PTO, holidays, and flexible scheduling * Phone reimbursement * Hybrid work (office/field/home mix) * Paid training, certifications, and continuing education * A growth-focused, collaborative culture where your voice matters At Earth Systems, you’ll have a seat at the table from day one—and the chance to shape meaningful projects that drive real change. Ready to take the next step? Apply now!

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Precast Project Engineer - Civil/Structural Precast Project Engineer – Shape the Future of Concrete Design and Mentor the Next Generation Are you a precast concrete expert ready to lead and inspire? Fisher Associates is seeking a Precast Project Engineer to serve as a Subject Matter Expert (SME) and guide our team in designing and delivering advanced precast and prestressed concrete structures. In this key role, you’ll mentor junior engineers, ensure design excellence, and drive innovation across diverse civil and structural projects. Working with multidisciplinary teams, you’ll develop efficient, sustainable, and code-compliant precast solutions that shape the built environment. Join Fisher Associates, where your leadership, expertise, and passion for precision fuel impactful projects and professional growth. Apply today to advance your career as a leader in precast concrete engineering and help shape the future of infrastructure design About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Maintain up-to-date knowledge of codes, technologies, and advancements in the precast-prestressed field., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-HYBRID Requirements: What You Bring, Your Expertise as a Precast Project Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 10 plus years of experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • An Office Engineer assists the EIC/Resident Engineer on daily management of construction inspection projects, providing technical and administrative information to others working on the project to ensure that work complies with all engineering standards, codes, and specifications. Responsibilities include, review of daily inspection reports and payment quantities in accordance with NYSDOT/MURK requirements, prepare change orders for overruns, changed conditions, and additional work as well as other project administration roles., • The Office Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience, or similar position with experience in the construction field and transportation projects., • NICET III or equivalent experience, or EIT designation, • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience, • Excellent communication skills, • Ability to supervise or coordinate the work of others, • Knowledge of NYSDOT's Equitable Business Opportunities (EBO) software Estimated Compensation Range: $83,200 - 101,920/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription: Shape the future of infrastructure through innovative highway and bridge engineering Are you an experienced Transportation Project Manager ready to lead high-impact civil engineering and transportation infrastructure projects? Fisher Associates seeks a motivated professional to manage and deliver innovative highway and bridge design solutions. Whether you’re a licensed Professional Engineer (PE) or an EIT nearing licensure, this is your opportunity to advance your leadership career and drive critical infrastructure projects that improve mobility and safety. At Fisher Associates, we support your growth, leadership, and innovation—your success is our priority. Ready to advance your career and shape the future of infrastructure? Apply now to join Fisher Associates! About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years in civil transportation engineering, including project management of DOT-funded highway and bridge projects, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills in transportation sector, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT or PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description Our Client is seeking a Project Engineer - Water/Wastewater to join their growing team in Syracuse, NY! Water and wastewater management presents unique challenges from environmental, health, and economic issues, to regulatory concerns. Our water management experts comprehend these complexities and apply their expertise in all areas of feasibility, design, and master planning, taking into consideration the value of water as a precious natural resource. Our qualified professionals develop creative and effective solutions for any water management project and are dedicated to ensuring that communities receive safe, consistent water and wastewater distribution, collection, and treatment. Responsibilities • Independently apply extensive and diversified knowledge of principles and practices in broad areas of assignments., • Prepare advanced engineering designs and/or technical data for completion and accuracy., • Utilize advanced techniques, theories and practices to complete assignments., • Design and review complete project documents for conformity and quality assurance., • Develop and apply new and/or improved techniques, processes, etc., for designing engineering plans., • Analyze and interpret data, formulate and solve problems., • Prepare or review scopes of work and budgets, and schedule assignments., • Prepare proposals to provide professional services., • Provide direction to engineers, technicians and administrative staff., • Plan and coordinate detailed aspects of engineering work., • Represent the organization in a variety of ways as an expert on engineering assignments., • Work within AutoCAD Civil 3D and alongside the design team managers to successfully complete projects within established budgets and deadlines., • Perform field investigations/ site visits as needed., • Prepare comprehensive draft proposals and change orders for review., • Prepare conceptual layouts in consultation with PM or client., • Review hydraulic calculations., • Review utility layouts., • Conduct team and select client meetings., • Provide technical guidance to Engineers and Senior Engineers., • Prepare and review pump station designs., • Review and respond-to contractor shop drawing submittals, RFIs, and change order requests, with assistance from PM., • Process contractor requests for payment, with assistance from PM. Qualifications • Bachelor of Science degree in environmental engineering or civil engineering., • FE preferred., • PE preferred., • 4-6+ years of experience in the civil/environmental engineering field with a concentration in water/wastewater design., • Experience, including linear (pipeline) work required., • Some experience with pump station design, water & wastewater treatment systems design preferred., • Experience with AutoCAD & OpenRoads is desired., • Excellent communication skills., • Design experience with water and wastewater treatment plant processes and design., • Ability to read, write,and understand English for purposes of comprehending written job-related communications and verbal instructions and interactions.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Maintenance and Calibration Lead is responsible for overseeing and coordinating maintenance and calibration documentation, compliance workflows, and continuous improvement initiatives that directly support the reliability and regulatory integrity of site operations. This role ensures that maintenance and calibration activities are effectively documented in compliance with regulatory requirements and company policies, and that continuous improvement opportunities are identified and implemented. A significant aspect of this role includes exercising independent judgment in reviewing technical documentation, recommending updates to job plans, asset records, and managing corrective actions in Maximo. The Lead acts as a liaison between Maintenance, Metrology, and Quality teams and ensures that work performed is audit-ready and aligns with operational priorities. While not a formal people manager, the Lead provides informal leadership, technical guidance, and mentorship to the team and serves as a point of contact in the absence of the supervisor. Additionally, this role provides dotted-line support to the Metrology Engineer, helping manage Out of Tolerance (OOT) investigations, vendor coordination, and standard documentation workflows—enabling the Metrology Engineer to focus on technical strategy and project support. Duties & Responsibilities • Review and analyze maintenance and calibration documentation within Maximo to ensure compliance with cGMP standards; initiate updates to job plans, asset records, and track corrective actions., • Provide back-up support to the Metrology Engineer, including OOT process initiation, tracking, and vendor coordination., • Conduct periodic audits of maintenance and calibration records for adherence to regulations, SOPs, and Good Documentation Practices; develop and deliver training to reinforce compliance and documentation quality., • Use independent judgment to prioritize and coordinate maintenance and calibration documentation tasks based on operational risk, asset criticality, and compliance impact., • Support cross-functional improvement initiatives to enhance maintenance and calibration reliability and minimize equipment downtime., • Lead or contribute to root cause analysis and CAPA activities related to maintenance or calibration non-conformances., • Serve as point of contact in the absence of the supervisor to ensure operational continuity and team support., • Act as CMMS (Maximo) documentation SME, ensuring data integrity and supporting audit readiness., • Conduct post-maintenance inspections with QA and Operations to verify completion, compliance, and readiness for production., • Maintain strong communication and alignment with internal stakeholders including Quality, Safety, and Technical Services., • Associate's degree in a technical field or equivalent training required; Bachelor's degree in engineering or related field preferred., • 5+ years of experience in an industrial, maintenance, or operations support role., • Proficiency in using CMMS (Maximo) for asset and work order management, job planning, and documentation workflows., • Thorough knowledge of industrial equipment used in pharmaceutical manufacturing., • Strong understanding of FDA, OSHA, and GMP regulations., • Ability to interpret SOPs, technical drawings, and equipment manuals., • Ability to assess and recommend spare parts strategies for reliability and maintainability., • Demonstrated ability to exercise discretion and independent judgment on matters of compliance and documentation quality., • Strong technical writing and documentation review skills. This role requires a combination of office-based and manufacturing environment activities. • Ability to sit or stand for extended periods while reviewing documentation, training staff, and performing compliance work., • Ability to walk through manufacturing, maintenance, and laboratory areas to conduct audits, inspections, and walkthroughs., • Occasional climbing of stairs, ladders, or elevated platforms during facility inspections., • Ability to bend, stoop, kneel, and reach to visually inspect equipment, instrumentation, or work areas., • Ability to lift and carry up to 25 pounds occasionally (e.g., calibration standards, files, or tools)., • Sufficient visual acuity to review technical documents, calibration data, and computerized systems., • Ability to communicate effectively in person and via electronic means. This role is primarily office-based with routine oversight and presence in production, maintenance, and equipment areas. The position may require occasional work in cleanroom or controlled environments and around noise, chemicals, or elevated areas, with appropriate Personal Protective Equipment (PPE). The employee must be able to comply with site safety procedures, gowning requirements, and regulatory controls while performing job duties. Supervisory Responsibilities This position does not include formal direct supervisory responsibilities but provides informal leadership, mentorship, and operational guidance to maintenance and calibration team members. The Lead acts as a subject matter expert (SME), exercises independent judgment in asset management and compliance documentation, and supports coordination of maintenance and calibration workflows in the absence of the supervisor. The role also includes dotted-line support to the Metrology Engineer for standard documentation and vendor-related functions. Travel <5% travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Support planning, design, and implementation of environmental remediation projects, including dredging, capping, stream restoration, and wetland construction. Bachelor's or Master's degree in Environmental, Civil, Coastal, or Geotechnical Engineering. Anchor QEA provides environmental planning, scie

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Independently performs, tests, inspects and records technical work of the highest degree of complexity. Plans and coordinates field construction observation activities and reviews the work of and provides mentoring of other inspectors. Serves as a liaison between the Project Owner, Contractor, and Professional Engineer having project oversight., • Reviews materials against specifications, prepares change orders, prepares and reviews contractor payment applications, and ensures that project records are being prepared in accordance with accepted standards., • A Resident Engineer must be able to fully express thoughts in writing and compile summary reports of other inspectors. Must have the ability to perform with the highest degree of independence, and effectiveness, in the field or in the office, within parameters established through the project plans and specifications. Must be fluent in the use of computers as a tool to aid construction observation., • A Resident Engineer must be an effective communicator with good written communications skills. This position is often required to communicate the requirements of the project plans and specifications to the Contractor and negotiate impacts to the project from changed conditions., • The Resident Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Desired 10 years of related experience required, or similar position with experience in the construction field and transportation projects., • NICET Level IV certification or a Professional Engineer's (PE) license is required. Estimated Compensation Range: $89,440 - 108,160/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

THIS POSITION REQUIRES AN ENLISTMENT IN THE U.As a Combat Engineer, you'll work quickly and skillfully to help Soldiers navigate while on combat missions by constructing bridges, clearing barriers with explosives, and detecting and avoiding mines and other environmental hazards.You'll provide expert