Trabajos fire en Buffalo, New YorkCrear alertas

What you will do Perform new installation commissioning and service activities on large scale, various manufacturers, Access Control, CCTV, Intrusion alarm and IP Intercom systems. How you will do it • oversee and inspect the installation of equipment to meet customer expectations and manufacturer specifications. Field coordination and communication, system programming, commissioning, AHJ testing and training on new system installations, • Evaluate and diagnose equipment that requires servicing as well as troubleshooting potential field wiring problems, • Provide specific solutions and recommendations to customers on the most efficient and cost effective method in restoring a specific system back to normal condition, • Manage assigned Electronic Systems service requests in regards to field labor hours estimated, • Customer satisfaction through coordination, response to customer requests and problems and clear communication skills, • Prepare reports on daily activities, • May be required to work minimal overtime as the work requires, • Read and understand complicated blueprints, diagrams, schematics, submittals, software/system programs, and operation/product manuals, • Required to lift and or carry equipment and tools, which may be over forty (40) pounds Working environment may involve climbing ladders and scaffoldings with equipment, upwards to forty (40) feet Capable of working in cramped workspaces such as ducts, crawl spaces, above ceilings, etc., • Must adhere to all OSHA and JCI safety policies and procedures, • Complete timesheets, mileage reporting and monthly vehicle reports in a timely manner What we look for Required • 5+ years’ experience with installation and service of fire alarm, access control, CCTV, intrusion and intercom systems. Knowledge of IP based systems required., • Demonstrate working knowledge of electricity and electronics In addition, demonstrate an aptitude for troubleshooting systems and performing necessary repairs, • Security experience with Access Control Systems as well as CCTV Systems required., • Ability to effectively work independently, • Demonstrate a high level of customer service, • Be able to carry and move equipment/tools weighing up to 40 pounds, • Minimum high school/trade school graduate, military, or two year Associate degree in a technical field involving electronics and/or computer based systems., • Working knowledge of personal computers (Windows 7 and later) and Microsoft's suite of Office software, • Working knowledge of IT network systems. Working understanding of IP based protocols., • Ability to use hand and power tools and test equipment such as multi-meters, oscilloscopes, digital analyzers, battery analyzers, frequency meters, decibel meters and communication devices as required, • Excellent verbal and written communication skills, • Ability to read and understand complex building architectural, mechanical and electrical documents, as well as project plans, specifications, schedules and equipment installation/operation/troubleshooting manual., • CCURE 9000 certification preferred but other certifications acceptable.

Job Description IMMEDIATE OPENINGS AVAILABLE The Hood Guys are a rapidly growing Exhaust Hood Cleaning company in the Buffalo and surrounding area. We are seeking Exhaust Hood Cleaners for both Full Time and Part Time people to join our team! Responsibilities: • Cleaning exhaust hoods in restaurants using a pressure washer and other equipment, • No experience needed, will train the right candidate!, • Friendly Personality, • Strong attention to detail, • Strong organizational skills, • Must have a reliable vehicleCompany DescriptionWe've been providing fire prevention / safety services in commercial kitchens for 25 years.We've been providing fire prevention / safety services in commercial kitchens for 25 years.

Job Description Glendale Communities is a local multi-family property management company based in WNY that develops, acquires, invests in, and manages a wide range of multifamily properties. Our mission is to provide first-rate resident living experience and a people-first work environment for our team members. Glendale's professional staff is committed to providing the highest quality management services and housing options with over 4,000 apartments in great locations throughout WNY, Rochester and the Southeast. MAINTENANCE TECHNICIAN II At Glendale the Maintenance Technician plays a key role in the daily operations of the business by performing routine and preventative maintenance at a community to always maintain the physical integrity of the property. The Maintenance Technician II is responsible for all maintenance duties assigned by their supervisor including general upkeep and repairs (patching/painting, drywall, light plumbing) and HVAC service calls. Key Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. • Handle all work assignments in a timely, professional manner., • Refurbish vacancies (Turnovers) including hanging cabinetry painting, cleaning, and general maintenance repairs with some supervision., • Perform general repairs to buildings including, but not limited to interior/exterior painting, repair or adjusting entry doors, replacing light bulbs or fixtures., • Perform general repairs to apartments including, but not limited to: patching and painting of drywall, repairs or changing of locks, light plumbing of sinks and drains, electrical work such as changing outlets and fixtures with some supervision., • Diagnosis of HVAC service calls, repairing/diagnosis HVAC systems in timely fashion with supervision, • Maintain property appearance including maintaining grounds and dumpster areas daily., • On call rotation is required to answer afterhours service calls, • Ensure that all fire and building codes are adhered to; will notify supervisor immediately of any potential safety or building code violations. The requirements listed below are representative of the qualifications necessary to perform the job: • Valid driver's license and clean driving record required., • Prior experience in apartment maintenance is a plus., • General knowledge of electrical, plumbing, and HVAC systems., • Ability to meet established deadlines., • Personable, professional attitude, • Pay commensurate with experience and skillset Benefits • Paid Holidays, • Paid Time Off, • Health, Dental & Vision Insurance, • Life Insurance, • 401(k), • 401(k) Matching, • Tuition Reimbursement

Job Description Glendale Communities is a locally owned multi-family property management company based in WNY that develops, acquires, invests in, and manages a wide range of multifamily properties. Our mission is to provide first-rate resident living experience and a people-first work environment for our team members. Glendale's professional staff is committed to providing the highest quality management services and housing options with over 4,500 apartments in great locations throughout WNY, Rochester and the Southeast. Duties/Responsibilities: To perform this job successfully, an individual must be eager and willing to learn how to complete a variety of residential maintenance tasks. This individual will work with senior maintenance personnel to enhance their skills to work independently. Handle all work assignments in a timely, professional manner. • Minor maintenance tasks including, but not limited to, painting (minor touch-ups to new coats), replacing light bulbs, caulking and minor drywall repair with supervision., • Maintain property appearance including monitoring grounds and common areas daily, maintaining the landscape and snow removal., • Cleaning units in preparation for occupancy including, but not limited to, appliances, fixtures, floors and removal of trash left in units., • Demolition of vacant units with supervision., • On call rotation is required to answer afterhours service calls., • Ensure that all fire and building codes are adhered to; will notify supervisor immediately of any potential safety or building code violations., • Perform snow removal duties as directed by supervisor, including shoveling, blowing and laying salt on icy surfaces., • Maintain integrity of the community by ensuring confidentiality of resident and company information., • Mechanically inclined mindset, • Valid driver's license and clean driving record required., • Own basic hand tools required – hammer, pliers, screwdrivers, etc. a plus!, • Ability to meet established deadlines, • Personable, professional attitudeBenefits:, • Paid Holidays, • Paid Time Off, • Health, Dental & Vision Insurance, • Life, Accident/Illness, Disability Insurance, • Annual Raise, • Holiday Bonus, • Employee Discount, • 401(k), • 401(k) 5% Match, • Dental insurance, • Professional development assistance, • Tuition reimbursement

Job DescriptionResponsibilities include operating heavy machines (Material cutting, welding, drop hammers, presses, drill presses, forklift) for the manufacturing of steel forgings. We produce steel forgings, similar to forged in fire on history channel but with much larger hammers. 1st Shift (6:00 AM - 1:30 PM), 7:00-4:00 for training first week. Benefits offered after 90 days.(Health, Disability, 401k) Must have: -High school diploma/GED -Reliable transportation(NO BUS) Prior experience as Machinist a plus but not a requirement Overtime (Time + 1/2) offered Job Type: Full-time Pay: $18.00 - $21.00 per hour based on experience Schedule: • Home weekends, • Monday to Friday, • Morning shift, • Overtime, • Year round workEducation:, • High school or equivalent (Required)

Job DescriptionCompany Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The Welder/Fabricator at GTI will receive their daily tasks and responsibilities from their working lead. Tasks will be centered around the assembly of materials to create a finished product in accordance with Customer specifications. The individual will be responsible for always maintaining a safe work environment, as well as reading blueprints and schematics for product design. Daily Responsibilities: • Work detail drawings fit-up piece parts in fixturing fit, tack and weld piece parts according to detail drawings with components consisting of steel channels, brackets, angles, sheathing, assemblies and sub-assemblies., • Tack welds all parts together in equipment, ensuring all dimensions are correct to specified drawings., • Weld complete assembly according to specified welding standards., • Correct fabrication mistakes., • Incorporate approved design changes where necessary., • Fabricate shop fixtures as required by assembly personnel per engineering sketch., • Meet production schedule, quality and planned labor hours with limited supervision., • Utilization of hand and power shop tools., • Understand and apply minimally these forms of welding, carbon steel, stainless steel, low alloy., • Normally receives basic instructions on routine tasks and detailed instructions on new assignments., • Read blueprints and drawings and take or read measurements to plan layout and procedures., • Determine the appropriate welding equipment or method based on requirements., • Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)., • Operate angle grinders to prepare the parts that must be welded., • Align components using calipers, rulers etc. and clamp pieces., • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)., • Repair machinery and other components by welding pieces and filling gaps, • Test and inspect welded surfaces and structure to discover flaws., • Maintain equipment in a condition that does not compromise safety.Requirements:, • Proven experience as welder., • Experience using a variety of welding equipment and procedures (TIG, MMA etc.)., • Experience in using electrical or manual tools (saws, squares, calipers etc.)., • Ability to read and interpret technical documents and drawings., • Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)., • Deftness and attention to detail.Additional Qualifications:, • General mechanical background., • Ability to use hand tools and welding tools safely., • Minimum of 1 year experience in mechanical assembly, AWS certification (American Welding Society) for welding of carbon steel using GMAW process position 3G, Vertical up and 4F overhead., • Able to work with limited supervision and follow instructions., • Able to work as a team member in group situations., • Fully understand manufacturing drawings, able to verify dimensions., • Understand tolerance systems., • Complete shop order documentation and time sheets., • Meet internal Company standards for quality and workmanship, • Expected to contribute and maintain conditions that will ensure a healthy and safe working environment., • Working knowledge of torch and plasma equipment., • Working knowledge of GTAW Welding., • Ability to apply workmanship standards and understand and carry out instructions furnished in written, oral or diagram form., • Able to perform basic tasks independently, limited supervision and in a group setting.GTI Fabrication is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Evergreen Health The Maintenance Technician supports operation, inspection, and maintenance processes to mechanical, electrical and plumbing equipment and systems in assigned facilities. Candidate performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc. This person will have the responsibility to provide written reports/logs to the Facilities Manager to assist in the reliable and efficient operation of base building and critical environment functions. As part of the essential functions of this role, the Maintenance Technician will: • Ensure a thorough understanding of properties assigned, Review building operations, preventative maintenance schedules, energy management systems and equipment status, • Complete and provide work order status updates through computerized work order system. Collaborate with the Facilities Assistant and Facilities Manager to resolve problems delaying completion of work orders, • Assist in the development and implementation of preventative maintenance and asset lifecycle programs. Create and maintain logs and inspection reports for testing and preventative maintenance on life – safety equipment, • Perform predictive maintenance, preventative maintenance, maintenance routines and equipment rounds and service requests as directed, • Troubleshoot malfunctioning heating, air conditioning and refrigeration systems to determine the cause of the malfunction, contact and oversee vendor for repairs if needed and outside of skill set, • Inspect buildings for adequate heating, lighting and ventilation, and ensure that properties are properly cleaned, in good order and in good working condition, • Complete general maintenance and minor repair work including but not limited to: doors, windows, toilet seats, toilet flushes, tap washers and interior and exterior painting and sealing, • Move office furniture, machinery, equipment and other materials as requested, • Ensure that clear fire passages are maintained in escape routes of buildings; Maintain and enforce building code guidelines for maintenance, mechanical and electric areas, • Provide on call services to respond and perform emergency repairs or preventative maintenance off hours as directed on nights and weekends Qualified candidate will have a high school diploma, or equivalent, and one (1) year of applicable working experience in general building repair and maintenance, basic plumbing, electrical and HVAC, three (3) years preferred. Candidate must be able to safely crawl, climb and lift at least 50lbs and have knowledge and safe performance practices in the use of relevant equipment and tools. Strong customer service and interpersonal skills, strong organizational and decision-making skills and ability to multitask, prioritize and meet deadlines essential. Must be able to communicate clearly and professionally in writing and verbally. Familiarity with computers and MS Office software (Outlook, Word) preferred. Awareness of and sensitivity to the issues and health disparities faced by underserved populations is essential. Job type: Full-time Required education: High school diploma Required experience: General building repair and maintenance, basic plumbing, electrical and HVAC (1 year)

Job Description Inventory Clerk Full Time Buffalo, NY DiVal Safety Equipment, a leader in the Fire, EMS and industrial safety equipment distribution business, is looking for an Inventory Supervisor with a “whatever it takes” attitude. The main focus of this position is to monitor and maintain the proper inventory accuracy while working directly with the warehouse staff while maintaining a safe, credible and positive working environment reporting to the Assistant Warehouse Manager out of Buffalo, NY. Duties and Responsibilities: • Focus on safety at all times – providing a safe working environment for all employees by enforcing related training and policies for equipment, vehicles and chemicals and monitoring unsafe conditions providing documentation, disciplinary action (if necessary) and continual training, • Responsible for warehouse 01 inventory discrepancy bin for orders with issues, the discrepancy shelf, and the overpull bin, • Assist in running quarterly reports for all warehouses, • Work hand in hand with Inventory Supervisor to assist with inventory issues, and cycle counts, • Run daily inventory reports, • Travel as needed for physical inventory for other locations., • Report any existing or potential safety concerns to management, • Maintain constant communication with the Inventory Supervisor to ensure workload awareness as well as with other DiVal personnel (Sales, Customer Care and Managers) to maximize shipments and deliveries, • Assist with the investigation of any issues that question warehouse credibility addressing all concerns with the highest sense of urgency, • Perform additional warehouse duties that may arise and assigned by the Management, including picking, shipping, receiving., • Willingly participate in further training and certifications as required to meet the future needs of this position Skills and Requirements: • Strong organizational skills and detail oriented, • Ability to lift up to 50 lbs. on a repetitive basis, • Possess advanced computer experience, AS400 background preferred, • Palm pilot / RF training a plus along with formal warehouse equipment training including but not limited to: tow motor, order picker, reach truck and scissors lift, • High school diploma / GED equivalent Benefits: • Medical benefits., • Dental benefits., • 401K., • Paid time off. DiVal Safety Equipment is proud and dedicated to being an Equal Opportunity Employer (EOE) of Minorities / Women / Veterans / Disabled Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location.

Job Description General Warehouse Associate- Full Time Buffalo, NY DiVal Safety Equipment, a leader in the industrial safety, Fire, and EMS distribution business, is looking for a full time General Warehouse associate with a “whatever it takes” attitude. The main responsibilities of this position are to pick/pack orders and deliver to our customers in an accurate and efficient manner with safety being a priority. Candidates must possess: • Positive energy and enjoy assisting and serving others., • Strong productive work ethic and sense of urgency., • Ability to manage multiple tasks., • Live by the Values of DiVal Safety: Be Safe, Be Accountable, Be Credible, Be Positive, Be Smart and Be Committed., • Always focus on safety – safety training and direction must be always adhered to., • Various Warehouse activity, including but not limited to - picking, packing, shipping orders, receiving inventory, and putting stock away., • Prepare and submit all necessary daily paperwork in a timely manner as required., • Complete cleaning and maintenance duties as directed., • Report any existing or potential safety concerns to management., • Reporting directly to the Warehouse Supervisors in alignment with other members of the management team., • Perform additional duties that may arise and assigned by management. Skills and Requirements: • Ability to pass a NON-D.O.T. physical with drug screen., • Strong organizational and time management skills., • Detail oriented and self-motivated., • Ability to lift up to 50 lbs. on a repetitive basis., • Experienced with warehouse equipment including forklifts, electric pallet trucks, elevated work platforms, and manual pallet jacks. (Preferred), • Experience with handheld equipment, like RF scanners, palm devices, and/or tablets. (Preferred), • Basic computer skills a must, AS400 experience a plus., • High school diploma / GED equivalent. Benefits: • Medical benefits., • Dental & vision benefits., • Other voluntary benefits (STD, LTD, Accident, Critical illness, Life insurance)., • Company provided life insurance policy., • 401K. Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location.

Job Description SUMMARY: To help maintain/enhance the value of the property throughout the repair and maintenance of Center structures, furnishings, systems and equipment at the least cost in order to contribute to the maximization of the Center's profitability. DUTIES & RESPONSIBILITY • Assist customers when and where needed, • Perform interior maintenance functions including repairs of fixture, floors, floor tile repairs, paint and prep, concrete cut and sidewall repairs, ceilings and walls. Also includes replacement of lighting devices., • Performs exterior maintenance functions including: repairs of fixtures, roofs, parking lots, and replacement of lighting devices., • Performs preventative maintenance checks on all equipment to keep it in the best possible condition., • Make minor electrical and plumbing repairs on the property., • Performs preventative maintenance checks on HVAC systems, fire protection sprinkler systems and fire extinguishers., • Ability to work from ladders and scissor lifts and boom lifts., • Informs supervisor of potential problems with any equipment used or systems responsible for., • Ability and hands on experience with corded power tools associated with building. maintenance and repairs such as circular saw, table saw, sawzall, and drills., • Act as a liaison with contractors in areas where responsible for maintenance and repair. EDUCATION REQUIREMENTS: High School Diploma or GED required EXPERIENCE: Hands on familiarity with methods and means of Various building maintenance and repairs. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts: in high, precarious places, in outside weather conditions, and is occasionally exposed to risk associated with various forms of building maintenance and repairs. The noise level in the work environment is equivalent to a busy shopping mall. Job Posted by ApplicantPro

Job Description About NovaSource NovaSource Power Services is the world’s #1-ranked solar operations and maintenance (O&M) provider and insight-driven total asset optimization partner for renewables asset owners ready to fuel smart growth. With over 20 years of operating experience and a presence on 5 continents, NovaSource has the global reach and strategic capabilities to achieve our clients’ renewables goals around the world. NovaSource’s comprehensive approach to total asset optimization in addition to O&M services includes value engineering, performance analysis, strategic supply chain management, and advanced monitoring systems. The company operates in key global markets managing over 30GW of solar power plants. NovaSource’s expertise extends beyond solar and includes battery energy storage systems (BESS), offering a complete suite of services for the evolving renewable energy landscape. Basic Job Functions: The Battery Energy Storage System (BESS) Technician is responsible for the safe and efficient operation, maintenance, and troubleshooting of utility-scale energy storage systems. This role supports system uptime and performance through scheduled maintenance, real-time fault response, and root-cause diagnostics of electrical and control systems. Working closely with site operations, OEMs, and remote monitoring teams, the technician ensures reliable system performance across components such as inverters, battery modules, fire suppression, HVAC, and SCADA. This is a field-based, hands-on role ideal for those with strong technical skills, a safety-first mindset, and an interest in contributing to the clean energy transition. Experience: • 1 year of experience in a related position. Education: • High School Diploma or equivalent required., • College or technical degree preferred., • Electrical certifications, state, journeyman, etc. a plus., • Equivalent training in military, utility, or power industry a plus. Physical Requirements: • Bending, kneeling, twisting, the ability to lift up to 70 pounds, the ability to climb ladders, and wear PPE for extended periods of time. Ability to work in high and low temperatures, sun exposure, and navigate on uneven ground on foot., • Ability to differentiate between different colors to manage color-coded wiring., • Good hand-eye coordination. Required Skills/Competencies: • Understanding of electrical safety and arc flash standards., • Ability to follow operating, switching, maintenance, safety and environmental procedures., • Must have a safety background with experience in Lockout Tag Out and Job Hazard Analysis., • Knowledge of industrial or power facility operation and maintenance., • Knowledge of local and national electrical codes., • Basic understanding of Electrical schematics and prints., • Understanding of electrical principles., • With oversight, able to retrieve relay files and documentation., • Familiar with CMMS systems for maintenance tracking., • Proven computer skills in a Windows environment (Microsoft Office Products) is required., • Must demonstrate the ability to communicate in English both verbally and written., • Ability to manage multiple tasks and projects., • Self-directed and accountable, able to think critically about processes and issues., • Valid Driver’s License., • Perform to quarterly key performance indicators, such as actual versus expected energy generation, on-time planned maintenance, and support overall plant and equipment efficiency., • Ensure a safe work environment by strict adherence to company protocols., • Responsible for personal safety, quality and schedule adherence., • Learn, understand, and comply with Job Hazard Analysis, Pre-Job Brief and Lock-Out-Tag-Out procedures., • With supervision be responsible for a variety of PM work including measuring, reading, testing and performing maintenance procedures on all site components., • Communicate effectively and professionally with internal and external stakeholders., • Ensure CMMS work orders are complete in their entirety., • Prepare documents necessary for procurement and utilization of materials and vendor services., • Ensure all documentation and required reports are reviewed, complete, submitted and filed., • Attend, participate in and pass all assigned training in safety, environmental and other areas as assigned., • Maintain work area and site housecleaning to 5S standards., • Inspect and clean PV equipment at assigned location., • Verify SCADA site configuration., • Adhere to Company vehicle maintenance standards and safety standards., • Will report to most senior site manager or supervisor depending on site organizational structure., • Travel may be required depending on the needs of the Company. Office Physical Requirements: All positions in our office require interaction with people and technology while either standing or sitting. In order to best service our customers, internal and external, all associates must be able to communicate face-to-face and on the phone with or without reasonable accommodation. NovaSource is committed to compliance with its obligations under all applicable state and federal laws prohibiting employment discrimination. In keeping with this commitment, it attempts to reasonably accommodate applicants and employees in accordance with the requirements of the disability discrimination laws. It also invites individuals with disabilities to participate in a good faith, interactive process to identify reasonable accommodations that can be made without imposing an undue hardship. Potential candidates will meet the education and experience requirements provided on the above job description and excel in completing the listed responsibilities for this role. US: Diversity Statement – Equal Employment Opportunity It is NovaSource’s policy to provide equal employment opportunity to all applicants and employees. NovaSource disapproves of, and will not tolerate, unlawful discrimination against any applicant or employee because of race, color, national origin or ancestry, gender (including pregnancy, childbirth, or related medical conditions), gender identity, age, religion, disability, family care status, veteran status, marital status, sexual orientation, or any other basis protected by local, state or federal laws.

Job Description Welcome to Good Carbon Co., where we're not just reimagining the future-we're actively building it, one sustainable project at a time. Rooted in our commitment to both our clients and the communities we serve, we're pioneering the transformation of real estate into eco-friendly havens. From acquiring properties to crafting them into super energy-efficient residences, our work is driven by relentless innovation and purposeful problem-solving. At Good Carbon Co., we're more than a company-we're a movement of forward-thinkers, visionaries, and solution architects. And now, we're looking for someone like you to help us keep our spaces clean, welcoming, and ready to inspire. Position Summary The General Property Management Maintenance Technician is responsible for ensuring the proper maintenance, repair, and upkeep of rental properties under the management of the company. This role plays a critical part in maintaining tenant satisfaction, property value, and overall operational efficiency. The Maintenance Technician will report directly to the Maintenance Manager and collaborate closely with other team members. Responsibilities of the Maintenance Technician include but are not limited to the following: Key Responsibilities: Maintenance and Repairs: • Perform routine maintenance tasks such as plumbing, electrical, HVAC, and general repairs to ensure properties are in good condition., • Conduct regular property inspections to identify maintenance needs, safety concerns, and potential repairs., • Respond to after-hours emergency maintenance requests to address urgent issues such as leaks, power outages, and heating/cooling failures., • Develop and follow a preventive maintenance schedule to proactively address potential issues and extend the lifespan of property systems and equipment., • Communicate with tenants regarding maintenance requests, repairs, and scheduled maintenance activities., • Maintain accurate records of maintenance requests, repairs, and related activities., • Ensure that all maintenance activities are carried out in compliance with relevant safety regulations and standards., • Monitor and manage inventory of maintenance supplies and materials., • Maintain the exterior of properties, including landscaping, cleaning common areas, and addressing issues related to curb appeal., • High school diploma or equivalent; vocational training or certification in maintenance-related trades preferred., • Proven experience as a skilled maintenance worker or similar role, demonstrating proficiency in various maintenance disciplines., • Strong technical aptitude and troubleshooting abilities, with a keen eye for detail and precision., • Excellent communication, teamwork, and interpersonal skills, with the ability to collaborate effectively with diverse stakeholders., • Flexible schedule and availability to respond to after-hours emergencies or weekend maintenance tasks as needed., • Commitment to safety, quality, and continuous improvement in all aspects of work., • Ability to work independently with minimal supervision, as well as part of a collaborative team environment. Good Carbon Co. is an equal opportunity employer and will not tolerate discrimination in employment on the basis of race, color, age, sex, sexual orientation, gender identity or expression, religion, disability, ethnicity, national origin, marital status, protected veteran status, genetic information, or any other legally protected classification or status. Good Carbon Co. is committed to maintaining a safe and compliant workplace. As part of our hiring process, all offers of employment are contingent upon the successful completion of a background check. This may include verification of employment history, education, criminal history, and other relevant background information, in compliance with applicable federal, state, and local laws, including the Fair Credit Reporting Act (FCRA) and New York State regulations. By applying to this position, you acknowledge that a background check may be conducted if you are selected for employment.

Job Description Lead Warehouse Associate- Full Time Buffalo, NY DiVal Safety Equipment, a leader in the industrial safety, Fire, and EMS distribution business, is looking for a full time General Warehouse associate with a “whatever it takes” attitude. The main responsibilities of this position are to pick/pack orders and deliver to our customers in an accurate and efficient manner with safety being a priority. Candidates must possess: • Positive energy and enjoy assisting and serving others., • Strong productive work ethic and sense of urgency., • Ability to manage multiple tasks., • Focus on safety at all times – safety training and direction must be adhered to at all times, reporting any existing or potential safety concerns to management., • Assisting locations supervisor with inventory duties, including, cycle counts, review order issues, and investigations., • Including picking, packing, shipping orders, receiving inventory, and putting stock away., • Supervise put away, and ship confirm process., • Assist in implementing vendor error processes., • Teach and train all employees on company processes and procedures., • Responsible for handling issues that may arise in shipping, receiving, inventory, and in vending., • Supervise the ship confirm process., • Report daily metrics to the metrics boards., • Ensuring all orders on the must shipboard have been addressed by the end of the day., • Assist customers in the store with pick-ups, order entry and answering phones., • Complete cleaning and maintenance duties as directed., • Enter vending orders needed for inventory to complete machine set up., • Complete machine set up as needed for customers., • Perform the end of day order close out., • Report any existing or potential safety concerns to management., • Reporting directly to the location Supervisor and other management team members, • Preforming on site replenishment of inventory in vending machines at local customers., • Perform additional warehouse duties that may arise and assigned by management. Skills and Requirements: • Ability to pass a NON-D.O.T. physical with drug screen., • Strong organizational and time management skills., • Detail oriented and self-motivated., • Ability to lift up to 50 lbs. on a repetitive basis., • High school diploma / GED equivalent. Benefits: • Medical benefits., • Dental & vision benefits., • Other voluntary benefits (STD, LTD, Accident, Critical illness, Life insurance)., • Company provided life insurance policy., • 401K. Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location.

Job DescriptionServices Utility Technician- Regular Full Time Buffalo, NY Join the DiVal Safety Equipment team as a member of our fast-paced, well-trained, and dynamic team. The focus of this position is to test, maintain, and repair PPE, electrical gloves, gas detection equipment, and fall protection equipment while ensuring the highest quality of workmanship and professionalism. The ideal candidate has a technical aptitude, is enthusiastic, and has great communication skills. Duties and Responsibilities: • Focus on safety at all times – safety training and direction must be adhered to - report any existing or potential safety concerns to management., • Manage daily activities of the Repair Center including, inventory control, pulling and packaging of orders, preparing and sending quotes, communication with customers, sales professionals and customer care reps., • Provide evaluation, estimates, and repairs to various makes and models of gas detection devices, fall protection equipment, hot sticks, electrical gloves, level A chemical suits, SCBA’s, and hand portable fire extinguishers., • Operate electrical testing equipment in addition to visual inspection., • Contact customers and/or Sales Reps to verify account information., • Accurately complete all required reporting, order processing and customer invoicing., • Assist customers to resolve issues or complaints, referring unsolved grievances to supervisor/management to ensure timely and effective service is provided., • Complete daily workload within defined timelines set by management., • Follow the Values of DiVal: Be Safe, Be Accountable, Be Credible, Be Positive, be Smart and Be Committed., • Perform additional duties that may arise assigned by management. Skills and Requirements: • Excellent communication skills, both written and verbal a MUST., • Strong mechanical aptitude and proficiency in using hand and power tools., • Ability to read and interpret technician manuals, blueprints, and schematics., • Excellent trouble shooting skills., • Computer skills: knowledge of Microsoft Office, CRM, and AS400 (preferred)., • Strong organizational and time management skills a must., • Attention to detail a must., • High School diploma / GED equivalent with 1-3 years prior customer service experience a plus. Benefits: • Medical benefits., • Dental & vision benefits., • Other voluntary benefits (STD, LTD, Accident, Critical illness, Life insurance)., • Company provided life insurance policy., • 401K., • Paid time off. DiVal Safety Equipment is proud and dedicated to be an Equal Opportunity Employer (EOE) of Minorities / Women / Veterans / Disabled. Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location.

Job Description MAINTENANCE TECHNICIAN Come join our AMAZING team!! CRM Rental Management, Inc. is currently seeking a Maintenance Technician at our Mariner Towers Apartments in Buffalo, NY! Please visit: to learn more about CRM. Our company continues to grow and expand providing us with the opening for new talent! Why join our Amazing Team?! CRM Benefits: • 11 paid holidays (includes 1 floating holiday and the day after Thanksgiving!), • Excellent insurance options/benefits that are up to 75% employer paid!, • 100% up to 5% 401k match, • Competitive Salary, • Annual reviews with performance-based bonuses, • EAP including Discount programs The Maintenance Technician’s primary duty is to ensure a safe, secure, and comfortable living environment for residents, visitors, and team members by maintaining the physical integrity of the property. • Carry out assigned duties as requested by the Superintendent in a safe manner according to company policies and procedures, state, and federal laws; e.g., OSHA, ADA, Fair Housing, etc., • Obtain a thorough knowledge of power, water, and gas turnoffs, clean-out traps, fire extinguishers, and fire hydrants on property., • Assists in all aspects of the property's maintenance, including building and grounds interior and exterior, custodial, preventative, corrective, deferred, and emergency maintenance., • Repairs structural wear and damage to buildings., • Grounds keeping and landscaping., • Clean parking areas, sidewalks, alleyways, hallways, and common areas., • Prepares vacant apartments including painting., • 1-2 years of full-time maintenance experience., • Working knowledge of electricity, plumbing, carpentry, HVAC, painting, and various appliances., • Willingness to perform tasks required and to learn and grow. Monday - Friday, 8:00am - 4:30pm. Subject to On-Call. 40 hours per week.

Job Description Maintenance Technician Lornamead is currently seeking a Maintenance Technician to join our team! Lornamead, Inc. manufactures and supplies, hair care, skin care, oral care, and bath products in America. The company offers toothpastes, teeth whitening products and oral analgesics for drug chains, and national food retailers. The company is headquartered in Tonawanda, New York. Your Challenge: • Performs maintenance & repairs related to building, grounds and building systems, in one or more areas such as electrical, plumbing, painting and grounds-keeping., • Assist in equipment installations, upgrades, and continuous improvement projects., • Establishes, monitors, and carries out preventative maintenance procedures and schedules for building, building systems and grounds. Ensures building and systems meet all safety, security and fire regulations and policies. Makes recommendations for major repairs and purchases to supervisor., • Performs painting, mechanical and plumbing maintenance and repairs such as installing switches, replacing lights and other basic electrical repairs, applying paint and other finishes, repairing drywall and floors, disassembling and reassembling equipment, replacing sinks and toilets and applying finishing material as needed to maintain appearance., • Collects and removes garbage and recyclable materials and ensures the safe disposal of hazardous waste., • Cleans external areas such as entranceways, sidewalks and parking lots using manual and power brooms, rakes, shovels, pressure washer and other equipment to remove dirt, leaves, and other refuse (landscaping and snow removal not included)., • Transports equipment, furniture and supplies manually and/or using aides such as dollies and carts., • Document maintenance activities in accordance with cGMP and FDA standards., • 2-5 years of building systems and maintenance experience in a manufacturing environment, • Ability to thrive in a dynamic environment, • Ability to multitask and work on multiple projects at the same time

Work closely with the Head Chef to lead a high-performing kitchen team. Oversee day-to-day kitchen operations, prep, and service. Our kitchen is driven by seasonality, sustainability, and a deep love of Italian heritage – think hand-rolled pasta, fire-roasted meats, house-made ricotta, and bol

Job Description Feed the Soul. Fuel the Culture. Lead the Pit. We are more than just legendary BBQ restaurant concept—it’s an institution built on bold flavor, genuine hospitality, and a love for good times. We’re on the hunt for a passionate and driven Restaurant Manager for our Buffalo, NY location to help us keep the fire burning strong. This is your chance to lead one of the most iconic BBQ joints in the country, where community matters, guests are family, and every shift is a chance to create unforgettable experiences. • Lead the Floor – Inspire and motivate your team to deliver badass service and crave-worthy food, every shift., • Own the Numbers – Drive sales, manage labor, and keep food and beverage costs in check without compromising quality., • Train & Develop – Build a strong, engaged crew that takes pride in the ‘Que and grows with the brand., • Raise the Standard – Maintain our high bar for cleanliness, safety, and compliance with health regulations., • Be the Culture – Represent the Dinosaur spirit inside and outside the restaurant. Support local partnerships, events, and causes. What You Bring: • 2+ years of full-service restaurant management experience, • Strong leadership chops and a team-first attitude, • Excellent communication and conflict-resolution skills, • Hustle, heart, and a sense of humor, • Availability to work nights, weekends, and holidays, • ServSafe certification preferred What We Offer: • Competitive salary + performance-based bonuses, • Medical, dental, and vision insurance, • Company paid Life Insurance, long & short term disability, • 401(k) with company match, • Paid time off and holidays, • Free meals during shift, • Real growth opportunities in a growing restaurant group, • A high-energy, no-BS workplace where authenticity rules If you’re the kind of leader who can command a kitchen, own the dining room, and provide guests memorable dining experiences, we want to hear from you TODAY! PLEASE APPLY TODAY TO BE IMMEDIATELY CONSIDERED FOR OUR RESTAURANT SERVICE MANAGER ROLE IN BUFFALO, NY.

Job DescriptionTeds has been serving up charcoal grilled classics to WNY since 1927. Today, nearly a century after establishing the first store, the business has grown to eight locations across Western New York, our Charcoal Chariot Food Truck and one location in Tempe, Arizona. The principles established by Ted in 1927, continue as our cornerstone today. We strive to serve the highest quality food, cooked to order in a clean and friendly atmosphere. Even better, we cook over open fire. While others shy away from real charcoal, we embrace it. Job Summary: Crew Members learn and perform essential duties in many different areas within our restaurant locations, including cashing customers, dressing dogs like a pro, learning how to grill, and frying- all while providing our signature Ted's fast and friendly customer experience. We are a locally owned, family owned and operated business that takes pride in both employing and serving members of our local communities, at a high level. If you enjoy working with a team in a fun environment where the time flies and you get to make peoples' day on regular basis, Teds might be the right place for you! Requirements Qualifications Guidelines: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: • No experience needed! We will train you!Language Ability:, • Good verbal and written communication skills are necessary., • The ability to read, write and comprehend instruction is necessary.Math Ability:, • This position requires basic math skills.Computer Skills:, • Basic computer skills are required in order to operate the POS (cash register) systems.Supervisory Responsibilities:, • This position has no supervisory responsibilities.Physical Demands:, • This position will require long periods of standing on hard surfaces, occasionally in warm temperatures., • Be able to lift up to 50 pounds, • Be able to reach, lift, and manipulate objects, • There is likely to be extensive lifting of supplies and materials and moderate to loud noise., • There will be constant exposure to hot equipment and oil throughout the work day.

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR HoEj2Ll3sM

Job Description Location This role is based out of the city of Buffalo, NY. Most duties such as performing jobsite visits to work with various clients at their locations for sales quotes and technology-based services are performed in the field. Remaining administrative tasks, such as preparing sales quotes, processing customer contracts and paperwork, will be performed on-site at the office. Job Summary We are seeking a dynamic and results-driven Account Executive with a strong working knowledge of different burglary alarm systems, CCTV and fire alarm equipment. This role involves a combination of new, commercial client acquisitions, acting as the main point of contact, and maintaining relationships with newly established clientele. As an Account Executive with Eastern Security Services, you will play a pivotal role in identifying and pursuing new business opportunities, nurturing client relationships, promoting the adoption of our advanced technology solutions, and driving sales growth. Salary Range $60,000 per year - $70,000 per year, based on experience, plus commissions Responsibilities • Utilize technical expertise to understand client requirements and recommend appropriate solutions., • Effectively communicate the technical features and benefits of products or services to residential and commercial clients., • Conduct product demonstrations to highlight key features and benefits for potential solutions., • Prepare detailed sales proposals to showcase the technical aspects and value proposition of our products or services., • Serve as the primary point of contact for clients, addressing their concerns and ensuring satisfaction., • High School Diploma or Equivalent, • Strong interpersonal skills, both oral and written., • Proficiency of the Microsoft Office Suite (Word, Excel, PowerPoint)., • Solid organization and priority management skills., • Two-year Degree, • 5 years of Alarm Industry experience, • Medical, Dental, Vision, Life & Disability Insurance, • 401k with 401k match, • Paid Vacation and Sick Time, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor.

Job DescriptionTitle: Youth Counselor Schedule: Saturday-Sunday 7:00am-3:00pm Summary of Duties: The Youth Counselor is responsible for all aspects of group living, role modeling solution oriented, strength-based counseling techniques in a non-judgmental, non-authoritarian atmosphere. Youth Counselors provide information about Compass House programs and philosophy. Youth Counselors model appropriate empathy and non-judgmental acceptance, employing relationship-building techniques that enhance and nurture the development of a functional helping relationship. The Youth Counselor will work with the Director of Youth Services, other counselors, volunteers, and interns in maintaining the residence, providing adequate nutritional meals, and conducting program activities which enhance residents’ self-esteem, basic skills and information level, including communication, decision making and problem-solving skills. The Youth Counselor is responsible for the maintenance of the safety and security of all residents, staff, and maintains and models a high degree of situational awareness of residents and residence, while respecting resident’s right and privacy. Accountability: The Youth Counselor is accountable to the Shelter Director, who is responsible for ongoing supervision and mentoring. Responsibilities and Examples of Work: Conducts crisis phone counseling per requests for emergency shelter and other intervention per client needs. Conducts intake interview and client assessment to determine need, eligibility, and admissions procedure as appropriate, per Compass House Intake Policies and Procedures:- secure appropriate history- secure confidentiality releases- discuss and secure client’s agreement to work within Compass House philosophy- complete legally required notification- initiate CPS or DSS procedures as appropriate- initiate appropriate case management steps Supervises admission into program, including house tour, explanation of rules, room assignment, fire safety procedures, introduction to other residents. Plans and implements daily programming in the House around basic daily living skills development, including but not limited to budgeting and meal planning, food preparation, cooking and clean-up, laundry, personal hygiene and household maintenance and management skills. Conducts and documents periodic fire drills and fire safety awareness sessions on all shifts. Solicits youth involvement in activity planning to enhance development independent living skills, including but not limited to money management, apartment acquisition, furnishing and maintenance, job skills training, recreation, group, and peer relationship building. Assists in training, mentoring, supervision and evaluation of student interns and volunteers. Maintains a safe, clean, orderly environment for residents and other staff. Assists in property accountability, including games, crafts, and sports equipment.Maintains records such as logs, contact sheets, and other pertinent information in a timely and dependable manner. Shares pertinent information about residents and program with other staff, volunteers, and interns. Participates in staff meetings, in-service training, and supervisory sessions as scheduled. Provides medical care as appropriate in loco parentis. Answers phone and door as needed. Provides supervision for computer activities. Any other task or responsibility as requested by the Supervisor or Director. Special Conditions: Youth Counselors must be available for a variety of work schedules to provide dependable consistent staff coverage 24 hours a day, seven days a week. Qualifications: High School Diploma or GED plus two years of college with continuation of college in progress or planned. Strong interest in working with adolescent.

Job DescriptionThis is an on call position. To fill for staff when one of our full time employees are unavailable. Available shifts that you could be on call for: 7am-3pm 3pm-11pm 11pm-7am Summary of Duties: The Youth Counselor is responsible for all aspects of group living, role modeling solution oriented, strength-based counseling techniques in a non-judgmental, non-authoritarian atmosphere. Youth Counselors provide information about Compass House programs and philosophy. Youth Counselors model appropriate empathy and non-judgmental acceptance, employing relationship-building techniques that enhance and nurture the development of a functional helping relationship. The Youth Counselor will work with the Director of Youth Services, other counselors, volunteers, and interns in maintaining the residence, providing adequate nutritional meals, and conducting program activities which enhance residents self-esteem, basic skills and information level, including communication, decision making and problem-solving skills. The Youth Counselor is responsible for the maintenance of the safety and security of all residents, staff, and maintains and models a high degree of situational awareness of residents and residence, while respecting residents right and privacy. Accountability: The Youth Counselor is accountable to the Shelter Director, who is responsible for ongoing supervision and mentoring. Responsibilities and Examples of Work: Conducts crisis phone counseling per requests for emergency shelter and other intervention per client needs. Supervises admission into program, including house tour, explanation of rules, room assignment, fire safety procedures, and introduction to other residents. Plans and implements daily programming in the House around basic daily living skills development, including but not limited to budgeting and meal planning, food preparation, cooking and clean-up, laundry, personal hygiene and household maintenance and management skills. Conducts and documents periodic fire drills and fire safety awareness sessions on all shifts. Solicits youth involvement in activity planning to enhance development independent living skills, including but not limited to money management, apartment acquisition, furnishing and maintenance, job skills training, recreation, group, and peer relationship building. Assists in training, mentoring, supervision and evaluation of student interns and volunteers. Maintains a safe, clean, orderly environment for residents and other staff. Assists in property accountability, including games, crafts, and sports equipment. Maintains records such as logs, contact sheets, and other pertinent information in a timely and dependable manner. Shares pertinent information about residents and program with other staff, volunteers, and interns. Provides medical care as appropriate in loco parentis. Answers phone and door as needed. Provides supervision for computer activities. Any other task or responsibility as requested by the Supervisor or Director. Special Conditions: Youth Counselors must be available for a variety of work schedules to provide dependable consistent staff coverage 24 hours a day, seven days a week. Qualifications: High School Diploma or GED plus two years of college with continuation of college in progress or planned. Strong interest in working with adolescent.

Job Description Ready to ignite a retail revolution? We’re hunting for a bold, visionary Director of Marketing to make Ashley | The Wellsville Group the #1 furniture destination in every market we serve. Based in Amherst, NY you’ll craft game-changing strategies, inspire a top-tier team, and drive traffic that fuels explosive sales growth. If you’re a strategic mastermind with a passion for leadership and results, this is your chance to shine with The Wellsville Group! What You’ll Do: • Shape the Vision: Build and execute a killer annual marketing plan to boost store traffic, brand buzz, and profitable sales., • Spark Excitement: Create in-store offers and messaging that fire up our Sales team and customers, lifting average tickets and making every buy a must., • Lead Like a Pro: Mentor a creative Marketing team, fostering collaboration and excellence while guiding one on one., • Crush KPIs: Use data-driven insights and AI tools to optimize campaigns, maximize ROI, and own the annual department budget., • Build Bridges: Partner with sales leaders, licensees, and AFI’s corporate team to align messaging and innovate events, signage, and promotions., • A strategic thinker with a knack for turning data into traffic-driving wins., • A leader with 7+ years of marketing experience, including 3+ in a senior role (retail or furniture a bonus)., • A master communicator, excelling in verbal, written, and public speaking with a flair for negotiation., • Tech-savvy, rocking Microsoft Office, Google Analytics, CRM platforms, and new tools., • Detail-obsessed, organized, and committed to confidentiality in financials and HR., • Ready to travel for when the business calls for it; GM Meetings, brand audits, etc., • Competitive Pay: A salary that matches your impact, plus performance-driven incentives., • Growth That Rocks: Lead a department, and shape the future of a growing retail powerhouse., • Team Vibes: Join a crew that’s exciting, impactful, and fresh, where gratitude and collaboration rule., • Top-Tier Perks: Health, dental, vision, 401(k), PTO, and sweet employee discounts on Ashley’s finest furnishings. If you’re pumped to lead, innovate, and drive Ashley | The Wellsville Groups growth, we want your vision at The Wellsville Group. Step up, inspire, and make waves—apply now!

Job Description Role Overview: The Mechanical Design Engineer Manager is responsible for overseeing the day-to-day operations of the mechanical design team. This position will directly interface with other leadership members of the company, and will serve as the subject matter expert to their team in the mechanical design field. Further, this role will be expected to assist and participate in the design process of Company projects, which are large metal enclosures. Job Responsibilities: • Directly oversee the Mechanical Design Engineers., • Provide managerial insight to the Mechanical Design team, serving as the subject matter expert on the field and company projects., • Manage the Mechanical Design Engineers workload and project schedules., • Participate in company leadership meetings as needed to provide updates and insight on the Mechanical Design team., • Associates degree or equivalent from a vocational training program or technical school, • At least 6 years’ experience as a Mechanical Design Engineer with specialty in structural steel applications, 3 of which are in a managerial capacity., • Familiar with ISO shipping container construction methods., • Familiar with prefabricated and modular construction methods., • Familiar with sheet metal, metal framing and weldments., • Candidate should have good oral and written communication, interpersonal, problem solving and analytical skills., • Proficiency with AutoCAD and BIM/Solid Works is required., • Experience with FEA analysis, weldment design and structural analysis, • Must have a customer service perspective with the ability to communicate effectively with all levels of staff and clients., • The successful candidate should be self-sufficient, have strong computer skills, and be very detail oriented., • Must be proficient in MS Office products including Word, Excel, Outlook.

Job Description Salary: $61,000- $65,000/yr Other Forms of Compensation: Pay Grade: 12 Crothall Healthcare is a Compass One Company that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 1300 healthcare service teams in 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013 and Becker's Top 150 Places to Work since 2016. A division of Compass Group USA, we have more than 26,000 team members. Our core services include: Environmental Services, Healthcare Technology Solutions, Patient Transportation, Laundry & Linen, Facilities Management, and Ambulatory EVS. Learn more at . Job Summary The Unit Safety Manager will be responsible for reducing claims and lost time injuries by providing safety and workers compensation support to the local units. The support provided will include: Training, site visits, inspections, implementation of policies and procedures, communication, and compliance with client requirements. This will be accomplished through routine meetings, conference calls, and on site visits. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. • Ensures that local management receive monthly status reports., • Follows OSHA, DOT and EPA regulations as defined by federal, state, local laws and, • Compass Support Services and client's policies/procedures., • QUALIFICATIONS, • EDUCATION and/or EXPERIENCE Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1469220 Crothall Healthcare ASHLEY VAVROCK [[req_classification]]

Job Description The Kestra team has over 400 years of experience in the external and internal cardiac medical device markets. The company was founded in 2014 by industry leaders inspired by the opportunity to unite modern wearable technologies with proven device therapies. Kestra’s solutions combine high quality and technical performance with a wearable design that provides the greatest regard for patient comfort and dignity. Innovating versatile new ways to deliver care, Kestra is helping patients, and their care teams harmoniously monitor, manage, and protect life. A Territory Manager is responsible for securing new business and managing a sales area independently, often remotely from Kestra main offices. This position contacts and consults with a variety of clients in a mixture of clinical settings. In addition to direct sales responsibilities for a given territory, the Territory Manager provides training, on-going product service and support, and assistance in the reimbursement process. ESSENTIAL DUTIES • Responsible for the sales and ongoing support of Kestra products, • Consistently meet or exceed quarterly and annual sales targets as well as performance-based objectives, • Build and maintain strong, long-term relationships with healthcare professionals across various cardiology specialties (e.g., interventional cardiology, electrophysiology, Cardiac Rhythm Management), • Manage pipeline of customers, • Grow and develop trusted partner relationships with key accounts and stakeholders within the territory in a professional and ethical manner, • Prepare quarterly Business Plans and present to Regional Sales Leadership, driving accountability and results., • Ensure responsible and appropriate use of budgeted expenses by adhering to Kestra policies and procedures, • Attend key exhibits and conventions, as required, • Coordinate patient interaction with Clinical Advisors and Customer Care team, • Provide key insights and timely feedback to Sales Leadership and Marketing to help shape future strategies, • Manage full-cycle sales cycle from introduction and product demonstration to training, delivery, and followup, • Represent Kestra at key industry conferences, conventions, and events, as required., • Serve as a field expert and resource in your territory, including assisting with reimbursement, navigating clinical teams, and responding to client issues and complaints, • Maintain records and Sales data using CRM Technology., • Adhere to Pledge of Confidentiality, • Information regarding a patient of this company shall not be released to any source outside of this company without the signed permission of the patient. Furthermore, information will only be released internally on a need-to-know basis. All Team Members will not discuss patient cases outside the office or with anyone not employed by this company unless they are directly involved with the patient’s case. COMPETENCIES • Passion: Contagious excitement about the company – sense of urgency. Commitment to continuous improvement., • Integrity: Commitment, accountability, and dedication to the highest ethical standards., • Collaboration/Teamwork: Inclusion of Team Member regardless of geography, position, and product or service., • Action/Results: High energy, decisive planning, timely execution., • Innovation: Generation of new ideas from original thinking., • Customer Focus: Exceed customer expectations, quality of products, services, and experience always present of mind., • Emotional Intelligence: Recognizes, understands, manages one’s own emotions and is able to influence others. A critical skill for pressure situations. Requirements EDUCATION/EXPERIENCE REQUIRED: • 5+ years of successful medical device sales experience, • 3+ years of outside sales experience, • Bachelor’s degree from an accredited four-year college or university in Business, Sales, Marketing, or a related field, or an equivalent combination of education and professional experience, • Must reside in the assigned territory, • Ability to drive an automobile with a valid driver’s license and acceptable completion of a motor vehicle report (MVR), • Demonstrated strong business acumen, • Excellent written and verbal communication skills, • Familiarity of MS Office, including MS Teams, • Post offer, must be able to achieve credentialing for hospital system entry including, but not limited to:, • Documentation of vaccination and immunization status, • Completion of background check, • Completion of drug screening testing, • Review and agree to hospital policies and procedures, • Completion of online courses, i.e., HIPAA, Bloodborne Pathogens and Electrical/Fire Safety PREFERRED EXPERIENCE: • Experience in calling Cardiologists, Electrophysiologists, Interventional Cardiologists, or Cath Lab highly preferred, • Demonstrated understanding of Durable Medical Equipment (DME) process flow, • Knowledge of the cardiac care landscape and customer decision-making processes, • Internal candidates who do not have the required experience may still be considered if they have demonstrated consistent performance aligned with sales expectations and have served in a sales support role. WORK ENVIRONMENT • Fast paced field role, • Noise volume typical of being in the field or clinical setting, • Extended hours when needed, based on business needs, • Kestra manufactures and provides life-saving products regulated by the Federal Food and Drug, • Administration and under contract with Medicare. Kestra maintains a drug free workplace and testing is a condition of employment post-offer. PHYSICAL DEMANDS • Frequent repetitive motions that may include wrists, hands and/or fingers, such as keyboard and mouse usage, • Frequent stationary position, often standing or sitting for prolonged periods of time, • Frequent computer use, • Frequent phone and other business machine use, • Ability to lift up to 40 pounds unassisted, at times from in and out of vehicle TRAVEL • Frequent domestic travel by car and/or air required, up to 90 % OTHER DUTIES: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the Team Member. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Benefits Kestra offers a very competitive benefit package including Medical, Dental, 401K with Match, etc. Pay equity is an important part of Kestra’s Culture. Our compensation ranges are guided by national and local salary surveys and take into consideration experience level and internal equity. Each role is benchmarked based on the job description provided If your qualifications and/or experience level are outside of the posted position, we encourage you to apply as we are growing fast and roles that are coming soon may not be posted. Compensation: An annual salary of $100,000, in addition to a bonus and uncapped commission, commensurate with experience and location. Kestra Medical Technologies is an equal opportunity employer. Kestra Medical Technologies does not discriminate on the basis of race, color, religion, national origin, veteran status, age, sexual orientation, gender identity and/or expression, marital status, disability, physical or mental status or any other characteristic protected by law. We are unable to sponsor or take over sponsorship of employment visas at this time. Applicants must be eligible to work for any employer in the U.S. Kestra manufactures and provides life-saving products regulated by the Federal Food and Drug Administration and under contract with Medicare. Kestra maintains a drug free workplace and testing is a condition of employment.

Job DescriptionCanacre’s core services focus on leadership in Environment and Land services throughout the project lifecycle. At Canacre, we emphasize continuous development and growth. Our commitment to investing in industry knowledge and the expertise of our teams sets us apart. Our goals are to provide technical leadership for greater regulatory understanding and certainty and to build collaborative relationships with stakeholders, mitigating tomorrow’s environment, land and right-of-way risks today. At Canacre, we act with honesty and integrity within a culture where trust, collaboration, and teamwork flourish. We commit to diversity, inclusivity and the celebration of successes. Our vision is to foster an environment that promotes inspired and empowered team members who make an impact. The Environmental Monitor - Certified Professional in Erosion Sediment Control (CPESC) will monitor and report on construction-related activities with respect to the general permit requirements of the applicable regulatory agency, the client, and other cooperating/permitting agencies. The role will have a strong focus on monitoring and inspection of Erosion and Sediment Controls (ESC) and the ideal candidate will hold a CPESC designation. In addition to monitoring ESC, the CPESC will monitor and report on construction-related activities in areas of pre-determined biological, cultural, and paleontological sensitive resources. The CPESC will also be responsible for inspecting construction sites to ensure compliance with project-specific Stormwater Pollution Prevention Plans (SWPPP) under the Clean Water Act, as well as compliance with erosion control regulations and applicable environmental regulations and permits. Upon completion of construction activities, the CPESC will monitor the implementation of the appropriate restoration treatments. DUTIES AND RESPONSIBILITIES: • Conduct daily inspection of construction activities for compliance with applicable project approvals, permits (federal, state, and local), and landowner agreements, for the construction of the Project, • Developing site-specific SWPPPs and providing recommendations for the implementation of appropriate Best Management Practices (BMPs), • Oversee implementation of mitigation measures and monitor construction activities within specific areas requiring protection or environmentally sensitive areas, • Conduct regular inspections of a variety of construction sites to identify potential environmental hazards and ensure compliance with SWPPP and other relevant regulations, • Monitor and report general environmental compliance by the Construction Contractor(s) and subcontractors to client, with particular attention to fire, dust, hazardous materials, erosion control, and restoration guidelines, • Locate and facilitate protection and/or avoidance of environmentally sensitive resources such as migratory bird and raptor nests, rare plants and noxious weeds, watercourses, wetlands, high sensitivity paleontological resource, and cultural resources, • Identify sensitive resources and areas of concern prior to upcoming construction activities, and coordinating with construction personnel to discuss, • Act as a resource to construction personnel to explain environmental regulations and relevant application to construction activity, • Verify that construction work areas, access roads, and environmentally sensitive features have been properly marked and flagged before work is initiated in the area, • Ensure that erosion control or other best management practices do not inadvertently cause impact to other sensitive resources, • Act as a point of contact for onsite government agency inspectors, • Inform the Construction Contractor(s) of all potential and existing compliance issues, and coordinate with the Project team to determine appropriate corrective actions, • Coordinate with the Project team for potential stop-work when construction activities violate the conditions of the project approval(s), permits, or landowner conditions, • Identify, document, and oversee corrective actions to resolve non-compliance issues, • Document the resolution of any compliance issues in daily reports, • Maintain and submit daily reports and logs to the Project Team that document construction activities and associated compliance status for that dayOther duties as required QUALIFICIATIONS: • Post-secondary degree in Environmental Science or related field of study, • CPESC Designation or completion of the NYS Erosion and Sediment Control Certificate Program (NYSESCCP), • Minimum 5 years’ professional experience in Environmental Management, compliance, SWPPP inspection and mitigation planning, • Strong knowledge of ESC best practices in construction, • Strong working knowledge of environmental legislation and regulations, • Experience related to transmission line construction would be an asset, • Strong verbal and written communication skills – data collection and interpretation, technical report writing, regulatory permit applications, client communications, etc., • Excellent interpersonal and communications skills, • Strong analytical, problem-solving skills, prioritizing and decision-making skills, • Excellent attention to detail, • Ability to interface successfully with multiple departments, external vendors and/or customers, • Ability to manage multiple responsibilities simultaneously with minimal supervision, • Detail-oriented, self-motivated and highly organized with strong problem-solving skills, • Ability to build strong, lasting relationships with key stakeholders, • Excellent written and verbal communication skills, • Working knowledge of Microsoft Office, • Valid Driver’s License, with ability to maintain insurability under the company’s insurance carrier At Canacre, we are committed to upholding the highest standards of employment practices in each jurisdiction we operate in. We ensure that all employees are fairly compensated for their work, in accordance with the provisions outlined by the Fair Labor Standards Act (FLSA) and provincial employment standards legislation. Canacre is an equal opportunity employer, committed to a diverse workforce. Canacre complies with federal and state/provincial law governing non-discrimination in employment practices. Powered by JazzHR bBmqSwuCKR

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and support services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Fire & Security Service Technician has the ability to program, calibrate, check, test and service access control, CCTV, burglar alarm and fire alarm installations in commercial facilities. What we are looking for: • 1 year of experience with configuring, programming, and checking out security installations., • 1 year experience understanding access control and fire alarm wiring diagram ms and best practices., • 1 year experience with Access Control, CCTV, Burglar Alarm and Fire Alarm systems, especially AccessXpert, Pelco, Axis, VideoXpert, Security Expert, DMP, Notifier, Andover Continuum., • Strong Ethernet networking skills., • MS Office Suite experience., • Strong computer skills., • Basic low voltage electrical testing skills FASA/BASA Certification. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description M/E Engineering is currently interviewing for a Plumbing/Fire Protection Project Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR FE4QecnHrP

Job Description Are You the Trial Lawyer Who's Ready to Fight? Are you a New York-licensed attorney with a passion for fighting on behalf of the disabled and catastrophically injured? Do you dream of trying real cases, making a meaningful difference in your clients' lives, and working with a team that actually goes to trial-instead of just talking about it? Are you tired of pushing paper for a partner who hasn't stepped foot in a courtroom since Bush was president? If you're nodding yes, keep reading. Who We Are: At The New York Injury & Malpractice Law Firm, P.C., we're not like the firms that settle fast and avoid trial. We fight for maximum justice for victims of medical negligence and catastrophic harm. Our purpose is simple and bold: Stopping Medical Injustice. We're based in the beautiful Hudson Valley, with a modern and flexible workplace culture (yes, you can work from home), a team-first mindset, and systems that bring structure, clarity, and peace of mind to your day. What You'll Do: • Lead jury trials in high-stakes medical malpractice and wrongful death cases, • Represent injured clients from intake through verdict, • Prepare pleadings, motions, and legal memos, • Take and defend depositions, • Negotiate settlements that reflect your client's true losses, • Attend court appearances and occasional in-office client meetings, • Collaborate with litigation paralegals, trial paralegals, and our new case managers What You Bring: • J.D. from an accredited law school, • Admitted to the New York Bar, • Experience in at least 3 jury trials, • Deep understanding of New York med mal and personal injury law, • Strong advocacy skills in voir dire, cross-exam, and closing, • Empathy, bedside manner, and a calling to serve, • Hunger to master your craft and grow as a trial lawyer Compensation: • Base Salary: $150,000/year, • Bonus Compensation: In addition to your base salary, you'll earn a generous performance-based bonus equal to 5% to 8% of the firm's legal fee on every assigned case. This is not a cap—your earning potential rises with every verdict, every settlement, and every client you fight for. You will have the potential to exceed six figures in bonus compensation alone. Benefits: • Full health insurance, retirement plan, and firm-paid CLE, • Equity Opportunity: Eligible for an equity ownership interest in the firm-vesting after 3 years of employment, • Trial-First Culture: Immediate trial opportunities with complex, high-stakes cases, • Flexibility to work remotely with structured systems in place Why You'll Love it Here: • A mission-driven firm committed to changing lives, • Elite support team and mentorship from John H. Fisher, a nationally recognized expert in law firm marketing and management and author of 2 bestselling books, The Power of a System and The Law Firm of Your Dreams, • Systems that support your best work-not chaos, • Opportunity to make a profound difference-and build a legacy How to Apply: We don't want a cookie-cutter résumé. Here's how to stand out: 2. Include a writing sample (preferably a trial brief or closing argument), 3. Résumé and references welcome-but your fire and grit matter more. This Isn't a Job. It's a Calling. If you believe that law is about more than billable hours... If you believe in accountability, in restoring dignity, in making the system work for the people it forgets... Then this is your moment. Apply now and join our mission to stop medical injustice-one trial at a time. Company DescriptionAt The New York Injury & Malpractice Law Firm, P.C., we're not like the firms that settle fast and avoid trial. We fight for maximum justice for victims of medical negligence and catastrophic harm. Our purpose is simple and bold: Stopping Medical Injustice. We're based in the beautiful Hudson Valley, with a modern and flexible workplace culture (yes, you can work from home), a team-first mindset, and systems that bring structure, clarity, and peace of mind to your day.At The New York Injury & Malpractice Law Firm, P.C., we're not like the firms that settle fast and avoid trial. We fight for maximum justice for victims of medical negligence and catastrophic harm. Our purpose is simple and bold: Stopping Medical Injustice.\r\n\r\nWe're based in the beautiful Hudson Valley, with a modern and flexible workplace culture (yes, you can work from home), a team-first mindset, and systems that bring structure, clarity, and peace of mind to your day.

Job Description We are currently seeking applications for Alarm Technicians for service and project assignments within the 4-6 hour radius of Buffalo, NY. This role involves the installation, troubleshooting, and repair of structured cabling systems in diverse settings. The position is full-time and entails significant travel. Candidates should be eager to learn and able to assist in other cabling environments as necessary. Ideal candidates will be self-driven and dependable, capable of working independently and adept at problem-solving to ensure tasks are completed efficiently. We offer long-term employment with competitive compensation and a comprehensive benefits package that emphasizes our commitment to our team members. Responsibilities: • Install, troubleshoot, and maintain diverse cabling infrastructures., • Execute low voltage cabling in commercial buildings, including some concrete drilling and conduit work., • Ensure cable management and safety compliance in all installations., • Assist in pre-installation processes by designing and planning technical solutions., • Install cable support structures like j-hooks, cable racks, and inner duct., • Conduct system tests to verify the functionality of installed cables and devices., • Address and resolve issues with cable networks., • Ensure compliance with all relevant safety and legal standards., • Proven experience as a Data Cable Technician., • Strong proficiency in installing and troubleshooting structured cabling in retail settings., • Required state licenses for low voltage, burglar alarm, fire alarm, security, and CCTV., • Willingness for extensive travel and flexible work schedules, including on-call and night shifts, • Familiarity with blueprints and site maps., • Additional experience in CCTV, voice, and fire alarm cabling is beneficial., • Able to identify colors and learn color codes., • Comfortable working in confined spaces and with both copper and fiber installations., • Skilled in operating boom or scissor lifts and comfortable working at heights., • Possession of PPE, basic telecommunication tools, and hand tools., • Reliable personal vehicle with appropriate insurance coverage., • Strong cabling infrastructure knowledge., • Excellent communication, customer relationship, and digital literacy skills., • Experience in conduit installation is advantageous., • $25-$45 hourly rate, dependent on experience and certifications., • Fully paid medical, dental, prescription, and vision coverage., • Life insurance, AD&D, and long-term disability insurance., • Generous paid vacation time and holidays., • Additional benefits including Teladoc, TriaHealth, and services for legal and identity theft protection., • Company-matched 401(k) and IRA retirement plans., • Per-diem allowances for overnight travel., • Reimbursement for travel time and mileage when using a personal vehicle.

Job Description Are you an experienced electrical engineer looking for an opportunity to grow your skills and work on a variety of exciting building projects? We are seeking an Electrical Engineer to join our Buffalo, NY office. In this role, you will work closely with senior engineers, project managers, and multi-discipline teams to develop electrical system designs, drawings, specifications, and reports for a diverse range of buildings. You will have the opportunity to gain experience in various markets, including healthcare, commercial, education, and institutional projects. This is a growth-focused position, ideal for an engineer eager to expand their knowledge and contribute to innovative, high-quality designs. At LaBella, we are passionate about problem-solving, sustainability, and creating impactful solutions for the built environment. The ideal candidate is self-motivated, detail-oriented, and eager to develop their expertise. Your responsibilities may include: Electrical Design & Engineering: • Develop electrical designs for power distribution, lighting, fire alarm, security systems, and telecommunications., • Perform load calculations for generators, transformers, switchgear, panel boards, VFDs, feeders, and branch circuits., • Prepare design drawings, technical specifications, and engineering reports., • Research and implement industry standards and best practices., • Assist with building condition assessments and system evaluations. Collaboration & Project Support : • Work closely with mechanical, civil, and structural engineers, as well as architects., • Assist senior engineers in multi-discipline project coordination., • Communicate with clients, manufacturers, and contractors to address project challenges and develop solutions., • Participate in project meetings and contribute technical insights. Technical Growth & Development: • Stay current with industry trends, codes, and emerging technologies., • Receive mentorship from senior engineers and take on increasing project responsibilities., • Bachelor’s or associate’s degree in electrical engineering, Engineering Technology, or a related field., • EIT certification preferred; working towards or having PE licensure is a plus., • Minimum 5 years of experience in electrical engineering within an A/E consulting firm, or closely related industry., • Experience with building system design. Healthcare experience is strongly preferred., • Proficiency in AutoCAD and Revit is required., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis) is required., • Understanding of national, state, and local electrical codes., • Strong organizational, communication, and problem-solving skills., • Ability to work on multiple projects simultaneously and meet deadlines. Salary Range: $85,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Collaborative team environment with mentorship opportunities., • Exposure to a variety of building projects in different industries., • Competitive salary and hybrid work flexibility., • Support for professional development and career growth. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are seeking a Facilities Custodian / Janitor to join our team! You will be responsible for maintaining a clean and orderly environment. RESPONSIBILITIES: Custodial • Secure the building (e.g., Sunday services, special events), including: setting and disarming the alarm, opening and locking doors, opening/closing windows, turning fans on or off, and ensuring all necessary lights are on or off., • Sweeps and mops all floors, stairwells on all levels of the building and in elevator vestibule and entrances., • Vacuums all areas of the building, including the altar, aisles, stage, and entrances., • Cleans all bathrooms., • Checks and replenishes supplies of paper towels, toilet tissue, and soap., • Opens, closes, cleans, and dusts doors, windows, and sills., • Wipes down pews and kneelers., • Removes garbage from the building., • Performs other related tasks as requested., • Routine set-up of tables and chairs., • Routine and special set-up and clean-up for meetings and events (i.e. table/chair layout), • Set up for Funerals including table set-up; parking restrictions; etc., • Performs and assists with small projects which could require knowledge of carpentry, plumbing, painting, plastering, mechanical and electrical work., • Performs seasonal work such as cleanings the gutters in the Spring and Fall; the installation and removal of window air conditioners., • Ensures that walkways, parking lots, and common areas are free of snow, properly salted, and properly lighted., • Maintains grounds, mows, and edges as needed. Picks up branches, garbage, cleans drains, trims branches., • Operates power and hand tools such as drills, saws, cutters, and hand tools such as wrenches, hammers, saws, shovels, snow blower and other miscellaneous tools. Works with ladders., • Performs routine maintenance on mower, snowblower, grill etc., • Maintains work areas (boiler room, slop room, garage) in clean and orderly condition as well as tools and equipment., • Checks daily the operation of boiler system including chemicals and water levels. Reports any issues., • Monitors the sump pump in the elevator. Clear if plugged., • Checks daily building, grounds and facilities for damage, malfunctions, etc., • Replaces light bulbs inside and outside of building as needed., • Monitors all safety hazards and takes remedial action to ensure correction., • Performs routine checks on smoke detectors; emergency exit window; wall heaters; etc., • May be called to respond any day of the week or hour to alarms, e.g. fire, burglar, etc., • Reports all needed repairs to supervisor this includes inside and outside building/grounds., • Good knowledge of the maintenance and repair of machinery, plumbing, fixtures and equipment, • Ability to make repairs and adjustments to a variety of mechanical equipment, • Ability to understand and follow routine oral and written instructions, • Mechanical aptitude, • Practical problem-solving abilities, • Industrious, reliable and dependable, • Possess good time management skills, • Flexibility with work schedule, • Ability to work independently as well as in conjunction with other staff members and members of the team. Preferred: 1-3 years of building maintenance experience and Trade school certification Minimum: High school diploma and prior experience one of the skilled trades – electrical, mechanical, plumbing, etc. and one to three years of in maintenance experience Company DescriptionWe are a family of faith known as Salem Evangelical Lutheran Church located off McKinley Parkway at 10 McClellan Circle in South Buffalo.We are a family of faith known as Salem Evangelical Lutheran Church located off McKinley Parkway at 10 McClellan Circle in South Buffalo.

Job DescriptionM/E Engineering is interviewing for a Plumbing/Fire Protection Design Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering, P.C. is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of Project Engineer/Designer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer/Designer, Project Engineer/Designer, Group Manager, Associates and or Principal., • Performs assignments independently after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • In addition to duties of CAD Operator., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • May supervise or coordinates the work of CAD Operators., • Associate degree, bachelor's degree, or equivalent combination of experience and education., • CAD (Revit) experience preferred. Compensation Range Powered by JazzHR HfKCYktNDN

Job Description Under general supervision, the locksmith performs locksmithing duties involved in the maintenance, repair and alteration of door hardware for campus buildings and structures. Also included is the management and issuance of keys per university policy. • Cut and issue keys to authorized personnel on campus., • Install, repair, adjust, service and maintain locks, keys, entry doors, and door hardware on campus for all buildings (classrooms, offices, dorm buildings, residences). Maintain hinges, closers, exit devices and all related door hardware., • Repair locks, keys and openers for doors as required under emergency conditions., • Install, repair, adjust, service and maintain locks for file cabinets, padlocks, lockers, desks, lockboxes, anything else that is secured with a locking mechanism., • Maintain inventory for lock systems and prepare requisitions for new purchases. Basic knowledge of computer software used for access control., • Maintain a system of keys, from master keys down to individual keys for a single entry., • Ensure all keys are up to date for fire protection lockboxes and knox box at Canavan., • Provide professional input on replacement of doors, hardware, and locking mechanisms. To include getting quotes for larger installations from reputable contractors., • Inspect and approve work is performed by outside contractors, ensure the work is done properly., • Work collaboratively and professionally with all co-workers andmembers of the campus community., • Transport materials, supplies and equipment to job sites, • Considered essential personnel/responder - which means that this position may be needed at times when the University is closed or in an emergency situation as determined by the supervisor., • Re-key locks and makes keys. Solid understanding of various keying systems of various manufacturer, • Knowledge of Keymark system., • Maintain confidentiality of information (including but not limited to: proprietary information, student and employee personal information, vendor information, pricing and cost information, etc.) both during and after their employment with the University. Any question regarding the confidentiality of material, should be referred to the supervisor. Any violation shall subject the employee to disciplinary action, up to and including termination of employment., • Basic knowledge of other building trades sufficient to perform minor repairs in carpentry, plumbing and electrical., • Use of hand tools and power tools, • Utilize blueprints, diagrams and manufacturer's installation manuals to complete assigned projectsComplete all work requests, document time, materials and detail description of work., • Observe all safety regulations and wear protective gear whenever required., • As of 8/1/2025 ability to provide own hand tools for the purposes of completing assigned work, • Considered essential personnel/responder - which means that this position may be needed when the University is closed or in emergency situations as determined by the supervisor., • Ability to periodically respond to campus emergencies during off hours., • Normal work week is forty (40) hours Monday-Friday with a 30-minute unpaid lunch, but the ability to work extended hours and weekends to respond to emergencies and meet deadlines is required., • A valid New York State driver's license is required that satisfies both university and insurance company underwriting rules and regulations for driving a university motor vehicle., • Any other requested duties to assist Facility Services operations, these may be outside of typical locksmith work. Such duties include assisting with inspections, providing access for contractors, minor repairs etc., • Performs other duties as assigned by supervisor Job Posted by ApplicantPro

Job Description Company Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The QC Technician is responsible for the inspection and testing of materials and finished products at various stages of the manufacturing process to ensure they comply with all applicable laws, industry codes & standards, as well as Company and Customer specifications/standards. Job Responsibilities: • Develop and maintain inspection reports., • Ensure compliance with federal and state laws, as well as company standards and specifications., • Maintain calibration of quality control equipment., • Perform inspections across all stages of production., • Prepare and maintain test data for review., • Evaluate data and draft reports, noting any relevant deviations from existing standards., • Identify areas for quality control improvement and implement new methods accordingly., • Communicate quality or compliance concerns with urgency., • High school diploma or general education degree (GED) required., • Solid understanding of measuring, inspection and test equipment., • Minimum of 2-5 years of inspection and/or production experience in the metals fabrication industry., • Visual weld and welding inspection experience., • Proficiency with Microsoft Office programs, specifically Excel., • Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions., • Ability to lift and/or move up to 50 pounds occasionally., • Specific vision abilities required include close vision, color vision, and the ability to adjust focus. (minimum required visual acuity - 20/20 corrected or uncorrected), • Demonstrated ability to work independently with minimal supervision., • Excellent organizational skills., • Demonstrated ability to analyze and interpret information., • Associate or bachelor’s Degree in a related field., • AWS Certified Welding Inspector - CWI. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Company Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The QC Technician is responsible for the inspection and testing of materials and finished products at various stages of the manufacturing process to ensure they comply with all applicable laws, industry codes & standards, as well as Company and Customer specifications/standards. This is a 2nd shift position with a standard schedule of Monday-Friday, 3:30pm-12:00am Job Responsibilities: • Develop and maintain inspection reports., • Ensure compliance with federal and state laws, as well as company standards and specifications., • Maintain calibration of quality control equipment., • Perform inspections across all stages of production., • Prepare and maintain test data for review., • Evaluate data and draft reports, noting any relevant deviations from existing standards., • Identify areas for quality control improvement and implement new methods accordingly., • Communicate quality or compliance concerns with urgency., • High school diploma or general education degree (GED) required., • Solid understanding of measuring, inspection and test equipment., • Minimum of 2-5 years of inspection and/or production experience in the metals fabrication industry., • Visual weld and welding inspection experience., • Proficiency with Microsoft Office programs, specifically Excel., • Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions., • Ability to lift and/or move up to 50 pounds occasionally., • Specific vision abilities required include close vision, color vision, and the ability to adjust focus. (minimum required visual acuity - 20/20 corrected or uncorrected), • Demonstrated ability to work independently with minimal supervision., • Excellent organizational skills., • Demonstrated ability to analyze and interpret information., • Associate or bachelor’s Degree in a related field., • AWS Certified Welding Inspector - CWI. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Are you passionate about healthcare building engineering systems? We are seeking a Senior Electrical Engineer with a strong background in healthcare building projects to join our Buffalo, NY Office. In this role, you will collaborate with regional leaders and engineering teams to develop concepts, strategies, designs, drawings, specifications, and reports from project inception through construction. You must be able to work independently and as part of multi-discipline teams to drive successful client outcomes in the built environment. This is a unique opportunity to lead and build a team, playing a key role in shaping the future of our healthcare engineering sector. At LaBella, our architects and engineers are problem-solvers, innovators, and change-makers, committed to addressing local and regional challenges, preserving natural resources, and planning for a sustainable future. Duties may include: Project Development & Client Engagement • Scope projects and develop proposals., • Build and maintain relationships with existing and prospective clients., • Function as the lead electrical engineer on multi-discipline projects from proposal through construction., • Serve as a project manager for building engineering-led projects. Electrical Engineering & Design • Develop electrical designs including single-line diagrams, electrical room layouts, panel sizing, lighting, and building systems., • Perform load calculations for generators, transformers, switchgear, MCCs, panel boards, VFDs, feeders, and branch circuits., • Prepare electrical design drawings, specifications, and reports., • Research and present coordinated design solutions., • Conduct building condition assessments and generate reports., • Ensure compliance with national, state, and local regulations, including FGI guidelines, DOH requirements, and CON submissions. Team Collaboration & Leadership • Work closely with mechanical, civil, structural engineers, and architects., • Mentor and train junior engineers., • Delegate and oversee project tasks to ensure successful completion., • Engage with owners, contractors, permitting authorities, and industry organizations. Technical Expertise & Innovation • Serve as Engineer-of-Record and internal technical expert on assigned projects., • Maintain up-to-date knowledge of industry technologies, trends, and best practices., • Passion for healthcare building systems and recognized expertise in the field., • Bachelor’s or Associate’s degree in Electrical Engineering, Engineering Technology, or a related field., • PE license (NY or OH) strongly preferred., • Minimum 10 years of experience in an A/E consulting firm., • Expertise in power distribution, lighting, fire alarm, security systems, and telecommunications design., • Experience with AutoCAD and Revit is a plus., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis)., • Understanding of Arc-Flash Evaluation and electrical safety codes., • Strong writing, organizational, and communication skills., • Attention to detail—because in this role, every detail matters!, • Ability to manage multiple projects simultaneously. Salary Range: $125,000 - $175,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Opportunity to lead and grow a team in a respected firm., • Collaborative, mission-driven culture focused on innovation and sustainability., • Work on impactful projects that shape healthcare environments. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Electro Mechanical Engineering Manager | GTI Fabrication – Buffalo, NY | Phoenix, AZ Location: Buffalo, NY or Phoenix, AZ Full-Time | Electro Mechanical Engineering | Leadership | Competitive Salary + Benefits Company Overview GTI Fabrication is a leader in the design, engineering, and fabrication of custom modular structures, including shipping container-based solutions and ballistic metal fabrication. We serve industries such as DOD contractors, military, disaster relief, and commercial sectors, with manufacturing taking place in our state-of-the-art facility in Buffalo, NY. Our engineering team designs and builds solutions ranging from military training enclosures and live fire ranges to energy storage systems, medical facilities, expeditionary camps, and more. Position Overview We are seeking an experienced Electro Mechanical Engineering Manager to lead our electrical design team. This role will act as the subject matter expert (SME) in electrical engineering, oversee day-to-day operations of the team, and actively participate in the design, development, and testing of electrical systems for large-scale modular metal enclosures and other industrial projects. This individual will work cross-functionally with other engineering leaders and company executives, while also driving technical excellence and mentorship within the team. Key Responsibilities Electrical System Design & Development * Design, develop, and test advanced electrical systems and components * Conduct signal processing, circuit analysis, and system optimization * Perform root cause analysis and troubleshoot electrical issues Technical Leadership & Team Management * Directly oversee and mentor the electrical engineering team * Provide guidance and expertise during system design reviews and project planning * Participate in company leadership meetings to communicate project updates Cross-Functional Collaboration * Collaborate with mechanical design, software, and project management teams * Integrate electrical designs with hardware, software, and industrial systems * Interface with customers and vendors when needed for technical discussions Documentation & Compliance * Create and maintain detailed technical documentation: schematics, diagrams, and specifications * Ensure designs comply with industry standards and regulatory requirements Required Qualifications ✔ Bachelor’s Degree in Electrical or Mechanical Engineering or related field ✔ Minimum 6 years of electrical engineering experience, with at least 3 years in a management or team leadership role ✔ Expertise in CAD software for electrical design (SolidWorks Electrical or equivalent) ✔ Strong knowledge of Industrial Electrical Power Systems ✔ Proficient in signal processing, circuit design, and troubleshooting techniques ✔ Ability to lead, mentor, and develop engineering teams Preferred Qualifications ✔ Master’s Degree in Mechanical or Electrical Engineering or related field ✔ Experience with battery storage, photovoltaics (PV), and renewable energy systems ✔ Familiarity with large-scale enclosure design and modular electrical integration Why Join GTI Fabrication? ✔ Lead complex and impactful modular and industrial projects ✔ Collaborate with cross-disciplinary experts in a growing company ✔ Competitive salary and full benefits package ✔ Be a part of critical projects that support defense, energy, and emergency response industries Apply Today to take your electrical engineering leadership career to the next level at GTI Fabrication!

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The ideal candidate will be responsible for providing engineered drawings for HVAC control systems. You should be able to review specifications and contract drawings for assigned projects. Provide accurate drawings for HVAC control systems and schematics using AutoCAD. Have the ability to size control valves, dampers, air flow stations, and the like for HVAC systems. Experience designing systems with typical DDC control lines such as: Schneider Electric, Tridium, or similar. Be able to write and understand the sequence of operations for HVAC control systems, along with assembling submittals and O&Ms for projects. Additionally, the ideal candidate will possess the ability and willingness to mentor and guide junior design engineers, supporting their growth and development within the team. What are we looking for • Associate degree in Mechanical Engineering/Mechanical Engineering Technology/Electrical Engineering/Computer Engineering or other STEM field with 3-5 years' experience in relevant field., • 4+ years' experience in controls design engineering OR 8+ years as a controls technician., • Sound knowledge of electrical circuits, HVAC, sensors and signal types, and controls required., • Familiarity with common control sequences including ASHRAE Guideline 36P., • Demonstrated capability drafting control drawings in Visio, AutoCAD, or equivalent., • Advanced computer skills and proficiency in MS Office Suite required., • Bachelors degree in Mechanical Engineering/Mechanical Engineering Technology/Electrical Engineering/Computer Engineering or other STEM field with 2-4 years' experience in relevant field., • Experience designing control systems using Schneider Electric EcoStruxure and SpaceLogic. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Hohl Industrial Services is currently seeking a Project Safety Coordinator to join our team! One would be responsible for providing on-site support and oversight of the company's safety program. This role will work closely with site Leadership to ensure daily safety operations, audits, training and overall compliance is being maintained. Responsibilities: • Site Safety Support, • Conduct daily inspections to identify potential hazards and ensure compliance with safety regulations, including Corporate and specific Customer requirements., • Assist Foremen in the completion and auditing of Daily Job Safety Analysis (JSA)/Daily Work Plans., • Attend job planning meetings to help incorporate safety measures into daily work activities., • Support project leadership in ensuring proper use of equipment and personal protective equipment (PPE) to maintain a safe work environment., • Investigate incidents and near-misses, documenting findings and recommending corrective actions., • Collaborate with the Corporate Safety Director, Project Managers, and Supervisors to integrate safety measures into project planning and site execution., • Training & Orientation, • Develop and implement site safety policies and procedures in accordance with OSHA and other relevant standards., • Lead safety toolbox talks in an engaging and understandable manner; ensure full attendance and maintain accurate documentation., • Conduct on-site training as needed for job-specific topics such as forklift and aerial lift operation, fall protection, confined space entry, etc., • Coordinate owner-required orientation and training programs; verify attendance and documentation for site access compliance., • Stay updated on industry's best practices and regulatory changes to continuously improve safety protocols., • Site Audits & Compliance, • Perform regular safety inspections and field observations based on project scope and duration., • Evaluate and document compliance in the following areas:, • Safety Documentation: JSA/Daily Work Plans, SDS sheets, job site postings, HASP, emergency contacts., • Mobile Equipment: Operator qualifications, inspection records., • PPE Usage: Ensure all personnel are using the appropriate protective equipment., • Site Conditions: Assess walking/working surfaces, housekeeping, site access., • Rigging & Hoisting: Review lift plans, crane inspections, rigging qualifications, and operator/rigger/signalperson certifications., • Fall Protection: Ensure fall protection systems are in place and used properly., • Tools & Equipment: Inspect hand and power tools for safe condition and use., • Additional Items: Check for proper storage of compressed gas, scaffold safety, fire extinguisher availability, necessary permits (e.g., hot work, confined space), first aid kits, and use of caution/danger tape., • Confined Space Entry: Monitor and verify safety protocols are followed., • Maintain daily reports to the Corporate Safety Director., • Three to Five (3-5) years of construction related safety experience to include but not limited to rigging, confined space, welding and hot work, steel erection, and fall protection., • OSHA 30 required, but OSHA 510 preferred, • In-depth knowledge of OSHA regulations and construction safety standards, • CSM/CHST preferred, • Valid Drivers License required Hohl Industrial Services, Inc. established in 1950, with headquarters in Tonawanda, NY, is a full service specialized organization that provides for a diverse industrial clientele. Hohl offers a unique range of field, shop, technical, equipment sales and services. With our professional staff of engineers, project managers, skilled tradespeople, fabricators and machinists, we are able to thoroughly study and develop a customized plan to meet all of our client's needs. Combining this with our innovative strategies and techniques, added with our experienced field personnel, we administer these plans in a safe, expedient and economical measure. Job Posted by ApplicantPro

Securitas - JobID: 163885 [Safety Officer / Law Enforcement] As a Security Officer at Securitas, you'll: Observe and report activities and incidents at an assigned client site; Make periodic patrols to check for irregularities and to inspect protection devices and fire control equipment; Preserve or

Job Description Are you passionate about building engineering systems? Do you feel like you’ve hit a plateau or just have a desire to advance your career? We are seeking a Mechanical (HVAC, plumbing and/or fire protection) Designer with a strong focus and background in Building Projects to work in our Buffalo, NY office. This position will work closely with engineering staff to develop designs, drawings, specifications, and reports for buildings from conception to construction. Individual must be able to work independently, as well as part of multi-discipline teams producing electrical engineering documents that detail designs for the built environment. Labella’s architects and engineers are passionate about problem solving, affecting change to address local and regional issues, protecting natural resources, and planning for the future. Requirements Responsibilities: The ideal candidate will be self-motivated with an eagerness to learn new skills. Some of the duties the candidate may be involved in include: • Work with other engineers as part of a Project Team to develop concepts, strategies, designs, drawings, specifications, and reports., • Prepare design drawings using Revit and AutoCAD., • Laying out and sizing of ductwork, HVAC piping, plumbing piping and fire protection systems., • Performing load calculations., • Sizing of equipment., • Coordinating design with other trades., • Perform field investigations to document existing conditions., • Must maintain a positive work atmosphere by behaving and communicating in a professional manner with co-workers, staff, project managers, other disciplines, and all other employees., • Expected to improve current knowledge of technologies and trends, as they apply to the applicable project and market types, and continually strengthens skills. Qualifications: • A passion for building systems, and a desire to become a respected expert on production systems and drawing standards., • Associates Degree in Computer Aided Drafting/Design, Engineering Technology, or related field desired but not required., • A certificate or degree in AutoCAD, Revit, or related field is a plus., • Proficiency in Revit and/or AutoCAD is required., • Minimum 5 years in building system designs., • Building system design experience focused on HVAC ductwork and piping distribution, plumbing piping, and fire protection systems is a plus., • Familiarity with HVAC load calculation programs (Carrier HAP or Trane Trace) is a plus., • Strong writing, organizational and communications skills., • This career requires an attention to detail; the details matter!, • Ability to work on several projects simultaneously. Salary Range: $75,000 - $105,000 annually. The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Canacre’s core services focus on leadership in Environment and Land services throughout the project lifecycle. At Canacre, we emphasize continuous development and growth. Our commitment to investing in industry knowledge and the expertise of our teams sets us apart. Our goals are to provide technical leadership for greater regulatory understanding and certainty and to build collaborative relationships with stakeholders, mitigating tomorrow’s environment, land and right-of-way risks today. At Canacre, we act with honesty and integrity within a culture where trust, collaboration, and teamwork flourish. We commit to diversity, inclusivity and the celebration of successes. Our vision is to foster an environment that promotes inspired and empowered team members who make an impact. The Environmental Compliance Inspector will monitor and report on construction-related activities with respect to the general permit requirements of the applicable regulatory agency, the client, and other cooperating/permitting agencies; as well as monitor and report on construction-related activities in areas of pre-determined biological, cultural, and paleontological sensitive resources. The Environmental Compliance Inspector will also be responsible for inspecting construction sites to ensure compliance with project-specific Stormwater Pollution Prevention Plans (SWPPP) under the Clean Water Act, as well as compliance with erosion control regulations and applicable environmental regulations and permits. The Environmental Compliance Inspector will oversee the proper implementation of mitigation measures and other environmental documents including, but not limited to, biological resources, cultural resources, paleontological resources, fire, dust, hazardous materials, and restoration requirements, as appropriate. Upon completion of Project facility construction activities, field monitors will monitor the implementation of the appropriate restoration treatments. DUTIES AND RESPONSIBILITIES: • Monitor construction activities within specific areas requiring protection or environmentally sensitive areas, • Conduct daily inspection of construction activities for compliance with applicable project approvals, permits (federal, state, and local), and landowner agreements, for the construction of the Project, • Conduct regular inspections of a variety of construction sites to identify potential environmental hazards and ensure compliance with SWPPP and other relevant regulations, • Monitor and report general environmental compliance by the Construction Contractor(s) and subcontractors to client, with particular attention to fire, dust, hazardous materials, erosion control, and restoration guidelines, • Locate and facilitate protection and/or avoidance of environmentally sensitive resources such as migratory bird and raptor nests, rare plants and noxious weeds, watercourses, wetlands, high sensitivity paleontological resource, and cultural resources, • Identify sensitive resources and areas of concern prior to upcoming construction activities, and coordinating with construction personnel to discuss, • Act as a resource to construction personnel to explain environmental regulations and relevant application to construction activity, • Verify that construction work areas, access roads, and environmentally sensitive features have been properly marked and flagged before work is initiated in the area, • Ensure that erosion control or other best management practices do not inadvertently cause impact to other sensitive resources, • Act as a point of contact for onsite government agency inspectors, • Inform the Construction Contractor(s) of all potential and existing compliance issues, and coordinate with the Environmental Compliance Manager and/or Field Lead to determine appropriate corrective actions, • Coordinate with the Environmental Compliance Manager and/or Field Lead for potential stop-work when construction activities violate the conditions of the project approval(s), permits, or landowner conditions, • Identify, document, and oversee corrective actions to resolve non-compliance issues, • Monitor and document restoration activities, • Document the resolution of any compliance issues in daily reports, • Maintain and submit daily reports and logs to the Environmental Compliance Manager and/or Field Lead that document construction activities and associated compliance status for that day QUALIFICATIONS: • Post-secondary degree in Environmental Science or related field of study, • Minimum 5 years’ professional experience in Environmental Management, compliance, SWPPP inspection and mitigation planning, • Minimum 1 year's professional experience in utilities construction industry, • Professional experience working on projects regulated under NEPA or state-equivalent, • Strong working knowledge of environmental legislation and regulations, • Training, qualification or designation related to development of SWPPPs or Spill Prevention, Control, and Countermeasure (SPCC) plans, such as CPESC and CESCL certifications or NYSESCCP required, • Experience related to transmission line construction would be an asset, • Strong verbal and written communication skills – data collection and interpretation, technical report writing, regulatory permit applications, client communications, etc., • Excellent interpersonal and communications skills, • Strong analytical, problem-solving skills, prioritizing and decision-making skills, • Excellent attention to detail, • Ability to interface successfully with multiple departments, external vendors and/or customers, • Ability to manage multiple responsibilities simultaneously with minimal supervision, • Detail-oriented, self-motivated and highly organized with strong problem-solving skills, • Ability to build strong, lasting relationships with key stakeholders, • Excellent written and verbal communication skills, • Working knowledge of Microsoft Office Powered by JazzHR oZD49VR7Nw

Job Description We are currently hiring a Project Architect in our Architectural division at our Buffalo, NY office. The Project Architect will support our Essential Facilities and Municipal Design Studio. The studio is an offset division from LaBella’s Municipal Group. The Essential Facilities Design Studio specializes in architectural projects for fire stations, police stations, SWAT Training, armories, 911 Centers, fire and police training centers, department of public works, ambulance centers, mercy flight hangers, and other miscellaneous municipal work for local and County municipalities. The Architectural Division at LaBella provides comprehensive planning and design services for a wide variety of markets, including Municipal, State, Federal, Healthcare, K-12 and Higher Education, Residential, and Commercial projects. The overall expectations of the Project Architect position are to work with large project teams, including in-house and outside subconsultants, to ensure that all aspects of the project are being met and completed. An individual in this position needs to be capable of delegating aspects of work to the Project Technician and coordinating with all other disciplines to successfully deliver high quality, coordinated projects. The Project Architect will assist the Project Manager with client meetings, design team meetings, and construction administration. In addition, the Project Architect must be motivated and capable of performing all duties with minimal guidance. A successful candidate will be self-motivated with the ability to lead, communicate, coordinate, and motivate. A successful candidate will also possess strong interpersonal, collaboration, and organizational skills, as well as contribute to a positive work environment. This position has excellent advancement opportunities within our corporate structure. Duties Ideal candidate could: • Execute a project start to finish, • Complete thorough and accurate Code reviews, • Have proposal writing experience, • Has experience with client management, • Has a record of executing projects with low change order percentage, • Understands how to execute public works projects, • Has specification writing experience including front end spec preparation, • Bachelor’s or Master’s degree in Architecture, • Registered Architect in the state of New York (desirable but not required), • 8+ years of work experience under a licensed architect, • Prior experience designing projects for Essential Facilities and public works projects is preferred., • Have thorough knowledge and understanding of New York State building codes, • Strong technical design, specification writing and construction document skills, • Well-developed project design and planning skills, • Excellent written and verbal communication skills, • Excellent graphic presentation skills, • Revit BIM Modeling experience, • Microsoft Office (Word, Excel, Outlook, MS Project) Salary Range: $70,000 - $85,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Job purpose The Director of Facilities & Construction will be a strategic leader responsible for the planning, operation, and maintenance of all facilities and infrastructure assets. This role oversees the design, building, renovation, and upkeep of all properties, ensuring safety, compliance, and operational efficiency. The position requires deep knowledge of facilities engineering, construction management, sustainability practices, and vendor relations to support both day-to-day operations and long-term capital improvement strategies. Duties and responsibilities • Oversee all building systems, including HVAC, electrical, plumbing, structural, and fire/life safety systems., • Ensure preventative and predictive maintenance schedules are followed to maximize asset lifespan., • Manage custodial, landscaping, snow removal, and other essential services., • Lead planning, design, budgeting, permitting, and execution of construction, renovation, and tenant improvement projects., • Partner with architects, engineers, contractors, and internal stakeholders to ensure on-time, on-budget delivery., • Oversee bid processes, negotiate contracts, and manage change orders., • Maintain full compliance with OSHA, ADA, NFPA, environmental, and local building codes., • Oversee workplace safety programs, emergency preparedness, and incident reporting., • Ensure all vendor and contractor work adheres to company safety standards., • Develop and manage annual facilities and capital budgets., • Track expenses, analyze cost drivers, and recommend efficiency improvements., • Negotiate vendor agreements for maintenance, construction, and specialized services., • Implement energy management and sustainability initiatives to reduce environmental footprint and operating costs., • Create multi-year facilities master plans aligned with business growth and operational needs., • Maintain accurate records, drawings, and maintenance logs for all assets. Qualifications • Bachelor’s degree in Facilities Management, Engineering, Construction Management, or related field., • Certified Facility Manager (CFM), LEED AP, PMP, or similar credentials strongly preferred., • HVAC, Electrical, or Plumbing certification a plus., • 8+ years in facilities management, construction, or engineering leadership roles., • Proven track record delivering multi-million-dollar construction or renovation projects., • Experience managing distributed facilities in manufacturing, logistics, or commercial sectors., • Strong understanding of mechanical, electrical, and structural systems., • Proficiency with CMMS (Computerized Maintenance Management Systems)., • Familiarity with sustainability standards, building automation systems, and energy efficiency strategies., • Exceptional organizational, budgeting, and vendor management skills., • Strong communication and stakeholder management abilities., • Demonstrated ability to lead cross-functional teams and manage competing priorities. Safety Requirements • Must be able to work in both an office and warehouse environment, • Ability to travel within the Buffalo area as needed, • Follow all GMPs (Good Manufacturing Practices) Physical requirements • Must be able to lift up to 50lbs, • Must have transportation to move between sites in the greater Buffalo area Direct reports Facilities Supervisor Assistant Property Coordinator M-F