Trabajos fire en Memphis, TennesseeCrear alertas

Job DescriptionFire Sprinkler Underground Utility Operator (Mini Track Excavator Operator) Position Summary We are seeking a dependable and safety-focused Underground Utility Operator to support fire sprinkler underground installation projects. This position is responsible for operating mini track excavators and related equipment for trenching, underground fire line installation, hydrant leads, underground piping, and site utility work while maintaining productivity, quality, and safety standards. The ideal candidate has experience working around underground utilities, understands grading and trench safety, and can work efficiently alongside underground fire protection crews. Position Title Fire Sprinkler Underground Utility Operator Reports To • Underground Superintendent Primary Responsibilities Equipment Operation • Operate mini track excavators, trenchers, skid steers, compact equipment, and related underground utility equipment., • Perform trenching for underground fire sprinkler mains and service lines., • Assist with excavation for:, • Underground fire mains, • Hydrant installations, • FDC supply lines, • Valve pits, • Thrust blocks., • Underground tie-ins, • Safely load and unload equipment from trailers. Underground Fire Protection Work, • Assist crews with installation of:, • Ductile iron pipe, • C900 PVC, • HDPE piping, • Underground valves and fittings, • Help maintain proper depth, slope, and alignment of underground piping., • Read and follow site utility plans, blueprints, and markings., • Assist with hydrostatic testing and flushing operations. Safety & Compliance, • Follow OSHA trenching and excavation safety standards., • Ensure trenches are properly protected and safe., • Identify and avoid existing underground utilities., • Participate in daily job site safety meetings., • Maintain clean and organized job sites. Maintenance & Inspection, • Perform daily equipment inspections., • Maintain equipment cleanliness and report maintenance needs., • Monitor fuel, fluids, tracks, hoses, and attachments., • Assist with minor equipment repairs and preventive maintenance. Qualifications Required • Experience operating mini excavators or compact track equipment for UG fire line installations – Minimum experience 5 years., • Valid driver’s license with acceptable driving record., • Ability to work outdoors in varying weather conditions., • Ability to lift 50+ pounds regularly., • Basic understanding of excavation safety practices., • Ability to work overtime and occasional travel if required. Preferred, • Experience in underground fire line installation., • Experience with utility construction or site work., • OSHA 10 or OSHA 30 certification., • CDL license (preferred but not required)., • Knowledge of NFPA underground fire service mains., • Experience reading construction drawings and utility maps. Skills & Abilities, • Strong attention to safety., • Good communication and teamwork skills., • Ability to work independently with minimal supervision., • Strong work ethic and punctuality., • Mechanical aptitude for equipment operation and maintenance. Compensation & Benefits (Customize for your company) • Competitive hourly pay $32-40 per hour depending on experience., • Overtime opportunities, • Company vehicle or equipment transportation assistance, • Health insurance, • Paid time off for Holidays and Vacation, • 401(k), • Training and advancement opportunities Performance Expectations The Underground Utility Operator is expected to: • Operate equipment safely with minimal damage or downtime., • Maintain production schedules., • Support crew efficiency and teamwork., • Minimize utility strikes and rework., • Maintain high safety standards at all times. Powered by JazzHR kmXtjQst2M

Job Description City Brewing Company – Who We Are With our roots in La Crosse, WI, we are proud to be North America’s largest co-packager of alcoholic and non-alcoholic beverages with four locations across the United States. By prioritizing safety and quality for our team, customers and partners, we put Safety and Quality First. We value Customer Focus by treating our customers’ needs as our own and deliver on our commitments together. We promote a culture of One Team by valuing and supporting each other to create shared success. We Take Pride in our work and the products we produce. We believe Clear Communication is essential for effective teamwork. Job Summary The Powerhouse Operator is responsible for general operation and upkeep of steam water tube boilers and monitoring and operation of air and ammonia compressor equipment, performing water analysis and keeping related documentation. Duties and Responsibilities • Operates and maintains automatically controlled, gas-fired, high-pressure boilers, • Operates and maintains ammonia refrigeration equipment including chillers, cooling towers, heat exchangers, and pumps, • Operates and maintains air compressors and air dryers, • Operates and maintains water softening, RO, and chlorine dosing systems, • Takes test samples and controls the addition of chemicals to water systems, • Operates and maintains auxiliary equipment such as feed water pumps, • Maintains proper water level and required steam pressure and supplies steam to meet plant load requirements, • Responsible for routine maintenance of pumps, valves, lines, and other utility equipment, • Monitors fire annunciation panel and computer monitor readouts of boiler room and refrigeration building equipment, • Performs cleaning and housekeeping assignments and any such duties as may be assigned by the supervisor, • Monitors and maintains all needed supplies and parts for safe and efficient operation of boiler room and auxiliary equipment, • Operates and maintains CO2 purification and collection system, • Operates and maintains well pump and diesel fire pump, • Performs all record-keeping duties, including data logging and filing, of boiler room equipment, maintenance procedures, ammonia compliance documentation, safety-related functions, and other miscellaneous events, • Required involvement in HAZMAT and Emergency Response Team, • Clean and maintain the work area, • Perform all duties within GMP standards, • Perform additional duties as assigned Minimum Qualifications • High school diploma or GED, required, • Shelby County Operating Engineers License or equivalent, required, • Required to complete and obtain Shelby County 1st class steam and refrigeration operator licenses, • Understanding and working knowledge of steam and gas/oil-fired high-pressure boilers, • Understanding and working knowledge of refrigeration principles and equipment, • Understanding and working knowledge of air compressors, air dryers, soft water systems, cooling towers, pumps, valves, and auxiliary boiler house and refrigeration equipment, • Understanding and working knowledge of water testing principles, • Understanding and working knowledge of computers and computerized equipment City Brewery is an Equal Opportunity Employer and all applicants will be considered without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description Job Summary We are seeking a talented Pizza Chef to join our team. In this role, you’ll be responsible for preparing delicious pizzas for our customers. The ideal candidate is experienced, social, and able to create a beautiful pizza. If you have a passion for creating meals that “wow,” we want to hear from you. It is required that you have at least 2 years of wood fired oven experience. Responsibilities: • Start a fire in our wood fired oven., • Manage cleanliness in the kitchen area., • Gather wood at beginning and end of shift, • Set up the kitchen with necessary tools and equipment, • Prepare food and present it in an appealing manner, • Maintain appropriate levels of inventory and restock when necessary, • Follow all food safety regulationsQualifications:, • Previous experience as a chef or cook, • Reliable and punctual, • Knowledge of pizzeria techniques and recipes, • Ability to remain calm and thrive under pressure, • Excellent time management skills, • Strong leadership skills

Job Description The Infantry is the backbone of the Army. These Soldiers fill the literal boots on the ground who are responsible for taking or holding ground during any combat operation. You’ll attack, repel, and capture enemy ground forces using advanced weapons and tactics. Job Duties • Assist in reconnaissance operations, • Employ, fire, and recover anti-personnel and anti-tank mines, • Operate weapon systems under various conditions, including engaging targets using night vision sights, • Operate and maintain communications equipment, • Perform as a member of a fire team during training and combat missions, • Process prisoners of war and captured documents, • Aid in the mobilization of vehicles, troops, and weaponry, • Use, maintain, and store combat weapons (e.g., rifles, machine guns, anti-tank mines, etc.) Helpful Skills • Willingness to accept challenges, • Ability to perform well under stress, • Physically and mentally in shape, • Ability to work as a team member Your training and experience as an Infantryman in the Army National Guard will instill discipline and management skills. You’ll learn not only teamwork, but how to lead your team in a combat situation or while responding to a natural disaster. Every employer wants someone with these qualities because these are the people a company can depend on to accomplish any task. The strong work ethic, valuable skills, and undeniable experience you gain in the Army National Guard will give you the edge you need in today's competitive job market. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for an Infantryman requires 14 weeks of Basic Training and Advanced Individual Training (AIT). Part of this time is spent in a classroom and part in the field under simulated combat conditions. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability.

Job DescriptionABOUT xAI xAI's mission is to create AI systems that can accurately understand the universe and aid humanity in its pursuit of knowledge. Our team is small, highly motivated, and focused on engineering excellence. This organization is for individuals who appreciate challenging themselves and thrive on curiosity. We operate with a flat organizational structure. All employees are expected to be hands-on and to contribute directly to the company's mission. Leadership is given to those who show initiative and consistently deliver excellence. Work ethic and strong prioritization skills are important. All employees are expected to have strong communication skills. They should be able to concisely and accurately share knowledge with their teammates. ABOUT THE ROLE: xAI is seeking a Lead Controls Technician to manage day-to-day operations for controls technicians and serve as the primary onsite contact for Instrumentation & Controls (I&C) field work in our data centers and infrastructure. This leadership role combines hands-on technical expertise with team coordination to ensure reliable implementation, maintenance, and optimization of control systems including BMS, EPMS, SCADA, PLCs, and related industrial controls. You will lead troubleshooting and support for critical systems such as cooling, power distribution, and safety protocols while collaborating closely with engineers and operations teams in a fast-paced, high-stakes environment. RESPONSIBILITIES: • Lead and mentor a team of Controls Technicians in the day-to-day implementation, modification, and maintenance of BMS, EPMS, and SCADA systems for data centers, ensuring adherence to engineer specifications and best practices., • Serve as the primary onsite point of contact for I&C field work, coordinating troubleshooting and repairs of critical systems (e.g., chillers, pumps, power distribution) using PLCs and industrial control technologies., • Oversee the preparation, updating, and optimization of HMI graphics and interfaces for effective system monitoring and operator use., • Maintain and enhance automated controls for fire safety, emergency shutdown procedures (ESOP), and other protective systems., • Monitor and report on key performance metrics (e.g., PUE, infrastructure uptime) via dashboards; drive continuous improvement initiatives., • Coordinate cross-functional responses to utility grid events, alarms, and operational needs while prioritizing tasks for the team., • Support commissioning, documentation, and knowledge sharing to build team capabilities and ensure high reliability of controls infrastructure.BASIC QUALIFICATIONS:, • Associate's Degree in a technical field (e.g., Controls Technology, Mechatronics, Automation, Electrical Engineering Technology) or equivalent hands-on experience., • 5+ years of experience working with industrial control systems, including at least 2 years in a lead or senior technician role., • Strong experience with Ignition SCADA or similar platforms and Siemens TIA Portal (or equivalent PLC programming environments)., • Proven ability to troubleshoot and lead resolution of complex I&C issues in live operational environments.PREFERRED SKILLS AND EXPERIENCE:, • Advanced proficiency in IEC 61131-3 programming languages (e.g., ladder logic, structured text) and hardware from Siemens, SEL, Rockwell, or similar vendors., • Experience with HMI development tools, data center or mission-critical facility controls, and performance metrics optimization., • Demonstrated leadership in mentoring technicians, task prioritization, and cross-team coordination., • Strong problem-solving, documentation, and communication skills with the ability to work independently while leading a team., • Familiarity with data center infrastructure (cooling, power, safety systems) and relevant standards/regulations.ADDITIONAL REQUIREMENTS:, • Ability to work extended periods standing, in tight quarters, and exposed to noise., • Willingness to work evenings, weekends, and on-call as needed for critical operations., • Ability to lift or carry 10-15lbs., • Subject to pre-employment drug testing and random drug/alcohol testing. xAI is an equal opportunity employer. For details on data processing, view our Recruitment Privacy Notice.

Job DescriptionFire Alarm Technician Location: Memphis, TN (On-Site) Division: Low Voltage / Fire Protection Company: State Systems, Inc. About State Systems, Inc. Founded in Memphis, TN, State Systems, Inc. is a total protection company providing fire protection, low voltage systems, and life-safety solutions across Tennessee, Arkansas, Mississippi, and Alabama. Our mission is simple: to protect life and property every day through integrity, innovation, and superior customer service. We’re actively seeking a dependable and skilled Fire Alarm Technician to join our team. In this role, you’ll install, program, and service commercial fire alarm and low voltage systems in accordance with project specifications, NFPA standards, and the Authority Having Jurisdiction (AHJ). This position offers long-term growth in a stable and safety-driven company. What You’ll Do As a Fire Alarm Technician, you’ll play a critical role in protecting people and property by ensuring the performance and reliability of life-safety systems. Key Responsibilities: Install, program, and service fire alarm and low voltage systems. Perform inspections, testing, and preventive maintenance on various fire alarm systems. Complete fire alarm installation and service projects in accordance with NFPA 72 and company standards. Test and inspect fire alarm system components such as smoke detectors, heat detectors, and pull stations. Troubleshoot electrical and low voltage issues using diagnostic equipment. Communicate effectively with supervisors, project managers, and customers regarding job status and system deficiencies. Utilize company software to complete reports, daily logs, and inspection forms accurately. Work within a team to collaborate, problem-solve, and support continuous improvement. Ensure all work is performed safely and in compliance with electrical and fire safety codes. Maintain tools, equipment, and company vehicle in good working condition. What We’re Looking For 1+ year of experience in fire alarm or low voltage systems (required). Valid driver’s license with a clean driving record. Strong understanding of NFPA 72 and related codes preferred. Ability to read blueprints, wiring diagrams, and technical specifications. Basic computer proficiency (Microsoft Word, Excel, Outlook). Strong problem-solving and communication skills. Ability to work independently and as part of a team. Physically capable of lifting up to 50 lbs., climbing ladders (12–24 ft), and working in various weather conditions. Arkansas Low Voltage License (preferred). Compensation & Schedule Pay Rate: $15.00 – $30.00 per hour (based on experience, education, and credentials) Schedule: Full-time | Monday–Friday | 7:00 AM – 4:00 PM Supplemental Pay: Referral Bonus | Lead Target Bonus What We Offer At State Systems, we reward performance and support your professional growth in a collaborative, safety-driven culture. Benefits include: 401(k) with company match Health, dental, and vision insurance Life, accident, and critical illness coverage Company vehicle or allowance, phone allowance, and logo attire Flexible Spending & Health Savings Accounts Employee assistance & wellness programs Paid time off and holiday pay Professional development and advancement opportunities Referral and retirement programs Pet insurance and other voluntary benefits Company Overview State Systems, Inc. is a privately owned total protection company headquartered in Memphis, TN. With divisions in Fire Protection, Cleaning Services, Technology, and Low Voltage, we deliver comprehensive safety and facility protection solutions across the Mid-South. Our certified technicians provide high-quality, code-compliant systems and exceptional customer service backed by decades of experience. Learn more at www.statesystemsinc.com. Join a Leader in Life Safety If you’re ready to grow your career in life-safety systems and join a company that values integrity, teamwork, and excellence, apply today to join State Systems, Inc.—a company built on trust and protecting what matters most. Texting Privacy Policy and Information: Message type: Informational; you will receive text messages regarding your application and potentially regarding interview scheduling. Message frequency will vary depending on the application process. Msg & data rates may apply. OPT out at any time by texting “Stop.” Pre-Employment Screening: All employment offers are contingent upon successful completion of a background check and drug screening, in accordance with applicable laws and company policy. SSI Fire & Safety is an Equal Opportunity Employer committed to diversity and inclusion. Powered by JazzHR 6ZqlyMis2u

Job Description Job Title: Engineering Maintenance Supervisor Department: Maintenance/Engineering Reports To: Chief Engineer FLSA Status: Hourly Non-Exempt Summary: This is a full-time supervisor position working the PM shift (second shift). Responsible for repairing, testing, adjusting, or installing equipment, by performing the following duties. Duties and Responsibilities include the following. Other duties may be assigned. • Supervising the PM second shift maintenance/engineers and making sure everyone is productive.*, • Performs scheduled preventive maintenance tasks, such as checking, cleaning, or repairing equipment, to detect and prevent problems.*, • Answers and responds to guest room calls to repair or replace all equipment.*, • Sets up and tests equipment to ensure that it functions properly.*, • Operates equipment to demonstrate proper use or to analyze malfunctions.*, • Tests faulty equipment to diagnose malfunctions, using test equipment or software, and applying knowledge of the functional operation of electronic units and systems.*, • Repairs or adjusts equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.*, • Calibrates testing instruments and installed or repaired equipment to prescribed specifications.*, • Advises management regarding customer satisfaction, product performance, or suggestions for product improvements.*, • Inspects components of equipment for accurate assembly and installation or for defects, such as loose connections or frayed wires.*, • Maintains equipment logs that record performance problems, repairs, calibrations, or tests.*, • Performs preventative maintenance in guest rooms and other areas.*, • Coordinates efforts with other workers involved in installing or maintaining equipment or components.*, • Consults with customers, supervisors, or engineers to plan layout of equipment or to resolve problems in system operation or maintenance.*, • Installs repaired equipment in various settings.*, • Communicates with Chief Engineer to relay all important information between shifts.*, • Fire and Safety procedures.*, • Any other responsibilities delegated by the Chief Engineer.* Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read, analyze, and interpret general business information, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to Front Desk employees and guests. Math Ability: Ability to work with basic mathematical concepts. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: To perform this job successfully, an individual should have knowledge of e-mail, order processing systems, word processing, spreadsheet, internet, and inventory software. Education/Experience: Bachelor's degree (B.A./B.S.) from four-year college or university; or six to eight years related experience and/or training; or equivalent combination of education and experience. Knowledge, Skills, and Other Abilities: • Communication, • Time management Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, use hands, reach with hands and arms, climb or balance, stoop, kneel, crouch or crawl, and talk or hear. The employee is occasionally required to sit, and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include depth perception. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to wet or humid conditions (non-weather), work near moving mechanical parts, work in high, precarious places, fumes or airborne particles, outdoor weather conditions, extreme cold (non-weather), extreme heat (non-weather), risk of electrical shock, and vibration. The noise level in the work environment is usually moderate.

Job Description Company: McCabe Restoration Internal Title: Emergency Services Specialist, Water Mitigation Technician Location: Memphis, TN Position Type: Full-Time, Essential Services Role Objective McCabe Restoration is looking for a resilient and detail-oriented Mitigation Technician to facilitate the recovery and restoration of residential and commercial properties. Reporting to the Restoration Supervisor, you will be responsible for the frontline execution of water, fire, and mold remediation projects. This role requires a blend of technical demolition skills, equipment expertise, and a commitment to customer service during high-stress disaster scenarios. Essential Duties and Responsibilities Property Assessment: Conduct thorough inspections of damaged structures to evaluate moisture levels and fire impact. Document findings through photos and moisture mapping to assist in the insurance claims process. Production Services: Perform on-site restoration tasks including high-volume water extraction, soot and smoke decontamination, and mold abatement. Precision Demolition: Execute controlled removal of compromised building materials (e.g., drywall, flooring, cabinetry). You must distinguish between salvageable and non-salvageable items to minimize unnecessary loss. Environmental Control: Calculate, set up, and monitor specialized drying environments using LGR dehumidifiers, HEPA air scrubbers, and high-velocity air movers. Site Maintenance: Maintain a clean and safe job site at all times, ensuring all equipment is sanitized and staged properly for maximum efficiency. Compliance & Documentation: Accurately record daily progress and drying logs. Ensure all work adheres to IICRC standards and OSHA safety guidelines. Professional Requirements Experience: 3+ years of experience in restoration, remediation, or heavy construction. Technical Proficiency: Strong knowledge of standard structural drying equipment and advanced demolition techniques. Bilingual Skills: Ability to communicate fluently in both English and Spanish is highly valued for team and client coordination. Physical Capabilities: Must be able to lift 50 lbs independently and perform labor-intensive tasks involving overhead work, stooping, and crawling. Availability: Standard shift is 8:00 AM – 5:00 PM with frequent overtime. Mandatory on-call availability for emergency response (evenings and weekends) typically twice per month. Qualifications & Logistics Certifications: IICRC (WRT, ASD, or FSRT) or RIA certifications are preferred and will lead to higher compensation tiers. Residency: Must reside within 20 miles of the Memphis area to meet emergency response time requirements. Compliance: Must possess a valid driver’s license with a clean driving record. Candidates must pass a pre-employment and annual background check, drug screening, physical agility test, and E-Verify. Soft Skills: A positive, solution-oriented attitude is required. You must be able to take direction quickly in fast-paced environments while maintaining empathy for property owners. Why Join McCabe Restoration? At McCabe, we don't just repair buildings; we restore lives. We offer a stable career path in an essential industry, providing the training and support necessary for our technicians to become masters of their craft. We pride ourselves on a culture of accountability, safety, and professional growth.

Job Description The Program Coordinator works under the supervision of the Director of IDD/DIDD. The Program Coordinator provides overall leadership to the department, which includes community homes in which individuals supported by MSSC programs. The Program Coordinator is responsible for maintaining program compliance with all funding sources and agency requirements. The Program Coordinator is responsible for adhering to all regulatory requirements, such as but not limited to MSSC Policy and Procedures, DIDD Provider Manual, Licensure, etc. The Program Coordinator has a responsibility to maintain cooperative relations with external parties, maintain quality service delivery and an exceptional work force. The Program Coordinator is held to a high standard of conduct and professionalism and must represent the agency with the highest level of integrity and positive image. Job Requirements: • Must be willing and able to be trained on all individuals in every home operated by MSSC, • Must be willing and able to follow all therapy plans, BSP's, PCSPs, Medical treatments, any and all Plans of Care related to every individual served by MSSC, • Must be willing and able to work extended hours on any given day of the week, including weekends, as needed, • Must be willing and able to work with coworkers cohesively and alternate assigned homes on a routine, rotating basis, • Must be willing and able to follow documented home visit form and turn it in completed in a timely manner for review and discussion, • Must be committed to creating and supporting a professional workforce; a quality program and life for each individual served; and promoting overall success for the agency., • Must be able to create implementation plans and track goals. Essential Job Functions: • Assure that each home is meeting with all staff every month to discuss issues related to overall management of assigned homes, including but not limited to safety from harm, home maintenance, person centered support plans, community integration, mealtimes, and documentation., • Consistently implement supervisory tools and methods to assure that each assigned home and assigned staff to that home are managed according to MSSC policies and procedures., • Adopt & deliver a coaching, mentor, supportive approach to managing staff and day to day operations within the homes., • Ensure that all medical appts and follow up are met as scheduled; all necessary paperwork is turned into nursing department timely., • Ensure that all Therapy plans are being followed, staff are properly and adequately trained, all equipment is in good, working order at all times., • Be able to be a Trainer to train on any and all plans related to each individual, • Ensure that all PCSP outcomes are being met per the time frame designated, • Ensure that all community outings are appropriate, person centered, and adequately documented., • Ensure that all required and assigned documentation is completed timely (daily per shift) and accurately, to include but not limited to Daily notes, sleep data, MARs, tracking forms, driving log, etc., • Responsible for reviewing, collecting and turning all end of the month paperwork into the office per the designated timeline., • Monitor implementation of the outcomes of each individual's support plan through monthly review of documentation;, • Ensure that all home documentation is being completed according to any individual plan of care, agency policy, state and federal requirements;, • Responsible for addressing acute issues on a daily basis, such as but not limited to transportation for appointments, community outings; management of transportation, vehicle issues; management of maintenance issues, etc, • Monitor and maintain all aspects of quality assurance for assigned homes and staff as well as the assigned vehicle/s; conduct an audit of each home on a monthly basis, using appropriate QA tool for internal assessment; ensure all follow up & corrective action is taken as necessary, • Responsible for ensuring follow up to incidents, med variances, investigations occurred as needed, • Ensure that unannounced supervisory visits are made to each assigned home and there is supporting documentation of the visit findings, • Ensure that all fire and tornado drills are completed timely and documented each month for each home, • Ensure that staff attend training/s as needed within the agency and through external entities in order for the agency to stay in compliance, • Ensure that all homes are appropriately staffed and staying within budgeted staffing hours, based upon the individuals needs per ISP and other plans of care, • Attend any and all meetings related to assigned caseload;, • Responds to calls, emails, texts, all forms of communication in a timely manner, • Serve as primary liaison between funding programs and various outside constituencies;, • Maintain regular communication with family members and other stakeholders;, • Encourage high productivity, commitment and cooperation by sharing information through honest, clear and timely communication; prompt follow up is critical, • Explore ways to motivate, educate and reward staff;, • Provide effective supervision to Staff and Contractors and oversight by establishing clear job expectations, monitoring work performance and providing feedback on a regular basis., • Ensure proper corrective action is taken when staff's performance issues are interfering with the overall operation of the home and/or agency; work in conjunction with Human Resources., • Maintain regular, on-site supervision of assigned homes. Additional Duties: • Participate in management team meetings, incident management meetings, Clinical Review Meetings and other special project/committee meetings;, • Participate in the On-Call Rotation;, • Serve as a member of the training team for pre-service training curriculum as needed, • Participate in public speaking venues to promote MSSC and to recruit residential staff as assigned, • Mentor, coach, train, • Other duties as assigned by the Executive Director or designee. Qualifications: • Bachelor's Degree psychology, special education or related field with two years of experience in the DIDD/IDD Field or comparable program preferred., • Five (5) years' experience in a position of similar scope in lieu of degree., • Excellent interpersonal skills with ability to observe, question, listen and give feedback in a consultative approach., • Excellent problem solving and decision making skills, both within a group and as an individual., • Ability to deal effectively with conflict while maintaining objectivity, diplomacy and tact., • Excellent organizational, verbal, written and computer skills., • Ability to work well independently with strong skills in time management, delegation, follow-up, organization and handling several tasks simultaneously., • Flexibility in assigned working hours., • A high energy level, adaptability, assertiveness, patience and ability to work in a team environment., • Operation of a motor vehicle is required which includes proof of a valid driver's license, an ability to maintain automobile liability insurance as required by state law in Tennessee and an ability to qualify as a driver under MSSC insurance guidelines., • Ability to sit, bend, stoop, reach, stand for long periods of time, and lift up to 50lbs as well work on a computer, staring at the computer screen for extended periods, • Multi-Tasker, • Compassionate, • Team Player Job Posted by ApplicantPro

Job DescriptionThe Contents Restoration Lead will ensure crews arrive to job sites prepared and ready to work. The Contents Restoration Lead will assist crews with packing out or packing back items and cleaning residential and commercial buildings. The Lead will be responsible for accurately documenting jobs as well as ordering supplies needed for the Contents Department. You should be able to communicate professionally and compassionately to homeowners. Key Responsibilities: • Perform on-site contents pack outs after fire and water losses, including careful inventory, labeling, and documentation of customer belongings using paper or digital systems., • Order packing and cleaning supplies for the Contents Department., • Oversee and assist a small crew at job sites., • Clean, deodorize, and restore a wide variety of contents (furniture, electronics, household items, décor, clothing, etc.) affected by fire, smoke, and water, using appropriate chemicals, equipment, and methods., • Structure cleaning; including wiping walls, ceilings, cabinets, and fixtures after fire or water damage., • Identify and separate salvageable vs. non-salvageable items; photograph and document non-restorable items as required for insurance., • Prepare restored contents for return (pack-back), including repacking, labeling, staging, and placement back into the home or business., • Follow all safety, cleaning, and documentation protocols, including proper use of PPE and restoration equipment. Qualifications: • Minimum 1–2 years of experience in restoration contents cleaning and pack outs (fire and water) required., • Experience working for a restoration, moving, or related service company strongly preferred., • High school diploma or GED required., • Valid driver’s license with an acceptable driving record is a must., • Ability to lift 25-40 lbs regularly, stand for extended periods, and work in a fast-paced, physical environment., • Comfortable working in homes and buildings that have experienced fire, smoke, or water damage, including occasional after-hours or on-call work for emergencies., • Strong attention to detail, especially with inventory, labeling, and documentation., • Professional, customer-service mindset with the ability to work respectfully in occupied homes and businesses., • Basic technology skills (smartphone/tablet) to use contents and photo inventory software., • IICRC certifications such as CPT (Contents Processing Technician), FSRT (Fire & Smoke Restoration Technician), or WRT (Water Damage Restoration Technician)., • Prior experience specifically as a Contents Technician, Packout Technician, or Contents Cleaning Tech. This is a full- time position, Monday – Friday 8 am – 430pm. With occasional evenings and weekends for emergency calls as needed. Pay depends on experience.

Job DescriptionDCI is seeking a dedicated and experienced Safety Manager to oversee and enhance our workplace safety programs in various locations. This role is responsible for ensuring compliance with OSHA regulations, developing and implementing safety policies, and fostering a culture of safety across all levels of the organization. The ideal candidate will be proactive, detail-oriented, and committed to maintaining a safe working environment for all employees. Requirements: • Collaborate with management and employees to promote a strong safety culture and continuous improvement., • Develop, implement, and maintain safety policies and procedures in compliance with local, state, and federal regulations (OSHA, EPA, etc.)., • Lead safety training sessions for employees, ensuring adherence to safety protocols and proper handling of equipment., • Ensure compliance with all safety regulations and training requirements: maintain necessary safety training documentation and records, including subcontractor compliance with safety program job site requirements., • Conduct regular safety audits, inspections (both job sites and office workplace conditions), and risk assessments to identify hazards and implement corrective actions., • Travel regionally and nationwide to support culture building, safety initiatives, site inspections and training., • Initial point of contact with affected employee(s)., • Manage care plans and coordinate communications with insurance companies., • Coordinate debrief sessions to determine and apply lessons learned., • Develop and oversee emergency response plans, including fire safety, first aid, and evacuation procedures., • Serve as the primary point of contact for regulatory agencies and represent the company during safety inspections. Qualifications and Experience: • Bachelor’s degree in Occupational Health & Safety, Environmental Science, or a related field (preferred)., • Minimum of 5 years of experience in a safety management role, preferably in a service, construction, or industrial environment., • In-depth knowledge of OSHA regulations, safety best practices, and risk management principles., • Strong leadership skills with the ability to influence and engage employees at all levels., • Excellent communication and training abilities, both verbal and written., • Certification in safety programs (e.g., OSHA 30, CSP, CHST) is a plus., • Ability to analyze safety data and trends to implement effective safety programs., • Proficiency in Microsoft Office Suite and safety management software., • Based out of Memphis, TN headquarters and requires approximately 50% to 75% travel to job sites, vendor locations, and other DCI facilities. No solicitation from headhunters and/or recruiters.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Paul Davis provides professional residential and commercial emergency restoration services for disasters of all sizes. From water and flood damage, to fire damage and mold remediation, Paul Davis franchise professionals are available 24/7 to clean up and repair damage to residential and commercial property. Founded in 1966, Paul Davis is a rapidly growing network of more than 370 independently owned and operated franchises in the United States and Canada. Paul Davis will grow to become over a $2 Billion business in the next 5 years. Position: Commercial Business Development Hours/Week: Full-time, 40+ hours Compensation: • Strong base salary commensurate with experience plus commission, • Bonus opportunities, • Medical, dental and vision coverage offered, • 401(k) with company match, • PTO, sick days and paid holidays, • Cell phone and computer provided by company Reports To: Owner Territory: Memphis, TN and the surrounding area Summary: • To increase awareness of the Paul Davis brand, • To promote the services of Paul Davis, • To build industry relationships Responsibilities: • Build strong relationships with current and potential clients through B2B, organized events, and cold calling, • Organize and schedule a calendar of consistent Business-To-Business visits, • Manage marketing programs found on the Marketing Activity Planner (MAP), • Ensure staff uses the Paul Davis brand correctly in accordance with Brand Standards, • Utilize marketing technology software to upload contacts to the CRM, send email campaigns, customize and print marketing collateral, track sales calls, leads, referrals, and notes, • Collaborate with the franchisor, read weekly communications, and schedule consistent meetings with the Regional Marketing Manager, • Manage social media accounts, post relative content and graphics, monitor all reviews and feedback and reply/ follow-up accordingly, • Attend business networking functions to promote the business, • Coordinate and manage community and charitable events, • Schedule, manage, and present Continuing Education courses, • Research local trade shows and coordinate Paul Davis booth set-up, • Attend training courses and annual conference seminars as requested, • Any other duties and responsibilities may be assigned on a needed basis Skills and Knowledge: • Strong verbal and written communications, • Strategic thinking and planning, • Project management and multitasking capability, • Strong organizational skills, • Exemplary computer skills, i.e. Internet & Microsoft Office Personal Characteristics: • Professional demeanor, • Personable, presentable, articulate, • Open, cooperative, enthusiastic, • Self-directed with exceptional initiative Qualifications: • Marketing, Public Relations or Communications degree, • Two or more years sales and marketing experience, • Franchise, restoration, construction/home improvement, and/or insurance industry experience ideal Paul Davis is an equal opportunity employer.

Job Description Job Title: Inside Sales Associate Company: Security Equipment Supply, Inc. (SES) Location: Memphis, TN Job Type: Full-Time | Non-Exempt About Security Equipment Supply (SES) Security Equipment Supply (SES) is a second-generation, family-owned distributor of low-voltage electronics. Since 1982, we've grown to 16 locations across 11 states, delivering trusted solutions in access control, fire and life safety, surveillance, home entertainment, and more. We’re in a transformative phase—modernizing operations, investing in technology, and enhancing customer and employee experiences. SES is committed to growing talent from within and creating meaningful career paths across the organization. Most roles are hybrid, providing flexibility while driving impact. At SES, we don’t just work here — we care for what we’ve built and the people we work with. Live the SES Way: Family • Respect • Celebration • Excellence • Integrity Work the SES Way: Curiosity • Fun-Loving Spirit • Commitment to Growth Position Overview Live the motto of “The Difference is the Way We Do Business” by serving existing and potential customers through facilitating sale of products / solutions and maintaining up to date industry knowledge. Always represent SES by providing exceptional customer service whether over the phone, by email, through our eCommerce channel, or in person. Seek to help our customers grow their businesses profitably, while increasing throughput to help SES attain our goals. What You’ll Do • Maintain / support existing business relationships with current customers and establish, develop, and build relationships with prospective customers to grow and generate incremental business for SES’s products/services., • Make outbound calls and / or in-person visits to existing and prospective customers within assigned area / territory on a regular basis. Follow up on leads in a timely fashion., • Touch base with customer / prospect monthly, or more frequently as determined by our business with their organization., • Achieve personal sales and gross margin goals as set by the Branch Manager and approved by the Sales Manager. Actively participate in the available commission plan(s) / variable compensation structures., • Use Relationship Management (RM) to track existing and facilitate conversion of potential customers into customers., • Consistently follow up on open quotes and orders., • Resolve customer complaints by investigating problems; developing solutions; and making recommendations to management., • Follow established credit policies/procedures including PCI compliance to protect our customers and SES., • Coordinate sales effort with Sales Management, Marketing, Accounting, and Logistics., • Maintain up to date industry expertise and grow product knowledge through continuous training provided by SES and SES approved partnerships., • Maintain regular, open communication with the Branch Manager in regards to any growth prospects, lost opportunities/business, customer service related opportunities, challenges, or issues., • Ensure all company policies and procedures are followed and violations are reported to the Branch Manager and/or the appropriate Administrative Manager., • Maintain a safe, secure, and clean working environment., • Comply with any reasonable management request., • Contributes to team effort by pursuing outlined goals for Branch of the Year contest, • These goals are aligned with pursuing “The Goal” of increasing throughput, decreasing operating expense, and improving cash flow for the organization., • Communication and coordination with logistic support and CRS as appropriate about customer orders, repairs, and returns. Required Skills • Oral and written communication/comprehension, • Problem sensitivity, • Deductive and inductive reasoning, • Thorough understanding and application of ERP and RM systems, • Possess the ability to work collaboratively and autonomously, • Project/time management, • Responsiveness and follow-through with customers, • Basic knowledge of Microsoft suite of products Required Education and Experience • Associate degree or equivalent combination of education and experience in the field of sales, outside sales, SES experience and / or business development, • Three years of related experience or equivalent combination of education and experience in the field of sales, outside sales, SES experience and / or business development, • Should have or seek to obtain a thorough understanding of low voltage products and solutions, • A commitment to always providing exceptional service Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without reasonable notice. Work Environment This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, and standard software suite(s), such as the ERP (Enterprise Resource Planning) system, and the Microsoft Suite of products. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is occasionally required to stand, walk or sit; use of hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move objects up to twenty-five pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Why Join SES? • Competitive compensation: market-aligned salary + performance incentives, • Profit sharing & retirement: SEP IRA contributions and annual profit-sharing bonuses, • Health benefits: affordable medical, dental, and vision plans, • Career growth: ongoing development, advancement opportunities, and a promote- from-within culture Next Steps As part of our hiring process, we invite you to complete a brief personality survey to help us understand how you work best. https://linkprotect.cudasvc.com/url?a=https%3a%2f%2fgo.cultureindex.com%2fs%2fgRIGxgYPY8&c=E,1,SBjJGOhUNGIp56PfOF2goyAkefuHKAzu-2hSma5XhPaG2TRNTnAg7QPiqw5oI6w9i5f73IZKYW1alNQ4qdUO2B2XEz1cPOzxNbCZog&typo=1 Be part of a growing company where your work matters, your growth is supported, and your success is celebrated.

Entity: Gas & Low Carbon Energy Job Family Group: Engineering Group Job Description: About Archaea Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. Introductory Employment Period Your employment with Archaea will begin with an introductory period of 90 days, starting from your first day of work. The introductory period is intended to support your transition into the role and provide an opportunity for both you and the Company to ensure a strong mutual fit. During this time, we’ll work together to assess how your performance, conduct, and reliability align with the expectations of the position and the values of our organization, while also offering guidance and feedback to help you succeed. During this time, your supervisor will evaluate your ability to meet the expectations of your role, including but not limited to: Consistent and timely attendance Quality and accuracy of work Ability to meet deadlines and productivity standards Adherence to company policies and procedures and the bp Code of Conduct Professional behavior and collaboration with team members and management At the conclusion of the introductory period, your performance will be reviewed. If you successfully demonstrate satisfactory performance consistent with the criteria set forth above, your continued at-will employment will be confirmed. If, however, you do not successfully demonstrate performance consistent with the criteria set forth above, your employment with Archaea will be terminated at the end of the probationary period. Note that, your employment with Archaea is at-will both during the probationary period and if you successfully complete the probationary period. At-will means that either you or Archaea may terminate your employment at any time, with or without cause, and with or without prior notice. About the role The Field Service/Maintenance Technician is responsible for performing highly skilled mechanical, electrical, electronic and instrumentation work in the installation, commissioning, repair, and maintenance of Archaea plant equipment, including but not limited to: troubleshooting simple to complex issues, rigging, maintaining and repairing pumps, engines, electric motors, fans, compressors, piping, valves, filters, traps, vaporizers, heat exchangers, gas meters, gas, instrumentation, MCC’s, VFD’s, and fire detection equipment. This position will be based out of the Memphis, TN area and requires travel to Archaea plants within the region. Key accountabilities Works closely with the plant operations team in the troubleshooting, installation, maintenance, and repair of plant equipment. Repair, replace, and adjust malfunctioning equipment to restore proper operating conditions specified in regulations and repair manuals. Responsible for the general upkeep and maintenance of all facilities and equipment as needed. Tests and calibrates, to established industry standards, equipment such as pressure and temperature transmitters, valve positioners, pneumatic controllers, electronic controllers, pressure and temperature switches and other process control equipment. Records equipment readings, interprets abnormal readings and alarms to take pre-designated corrective action including activation of emergency equipment and procedures. Performs equipment inspections to ensure that the equipment is safely maintained and operable; performs related testing and repair as needed. Calibrates electronic instrumentation, verifies, and adjusts equipment tolerances and records results on calibration checklists. Performs work orders for inspections and both preventive and corrective maintenance in accordance with company procedures. Maintains test equipment calibration records Assists in tracking spare parts inventory reporting deficiencies for restock and reorder. Assists with electrical control system designs and modifications when requested Follows control system techniques and best practices Assists with new plant start up testing. Maintains current knowledge of the latest codes, standards and best practices to encourage electrical safety for personnel and equipment protection. Assists with PLC programming for a wide variety of processes, control system hardware and wiring, HMI systems, and a wide variety of hard-wired control circuits. Assists the bid solicitation process from equipment suppliers and oversees procurement of major control systems components such as switchgear, custom control panels, MCC’s, PLC’s, and HMI systems if requested Assists with quality control over all new control systems equipment, performing pre-delivery inspections and tests at supplier facilities where needed. Observes operating of installed equipment to detect hazards, problems, and the need for service, repair/replacement of mechanical components and necessary adjustments. Assist other maintenance team members in repairs and downtime events. Work shift is 10 hours per day 4 days per week. The work schedule is subject to change per business needs and management discretion. Overtime may be required to meet various business needs. Must be able to travel to plants in region to support maintenance and outage activities Essential Education Graduation from high school (or GED) and three years related Mechanical work experience Vocational Training/ Military Service preferred Essential Experience 1-3 years’ experience with PLC programming and troubleshooting, preferably Allen Bradley, GE (Proficy Machine Edition or Cimplicity), Familiar with HMI programming or troubleshooting (no specific manufacturer). 1-3 years’ experience working with and troubleshooting VFD motor controls and basic process control equipment (pressure, flow, temperature sensors). 1-3 years’ experience with natural gas or LFG fueled engines in either power generation or gas compression applications (preferably Cat engines). Strong communication, CMMS, computer skills, and some experience with automation systems Ability to work with hand tools and various shop equipment (welders, drills, metal cutting, etc.). Good people skills and able to work through conflict to achieve desired results. Ability to service machines, equipment, or devices to remove and replace defective parts. High regard for safety standards. Experience with LOTO and other safety programs Proficient in reading and understanding prints/schematics. Ex P&ID’s, GA’s, control drawings Must possess ability to read and interpret operations and safety manuals, analyze, and apply basic troubleshooting and repair techniques on plant equipment. Ability to work independently with minimum supervision. Desirable Criteria Maintenance of industrial equipment, specifically gas processing equipment 1-3 years I&E experience Any technical certification or training is a plus. Why join us? Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today’s energy system and build out tomorrow’s, apply today! How much do we pay (Base)? 46- $50 *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting. This position offers paid vacation depending on your years of relevant industry experience and will range from 120 – 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays. You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks’ paid leave for the birth or adoption of a child. Learn more at benefits@bp. Join our industry-leading team and you’ll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to: · Quarterly Momentum Bonus · 401K Program · Health, Vision, And Dental Insurance · Life Insurance · Short-Term Disability · Long-Term Disability But above all? You’ll play a key part in helping bp deliver our ambition – to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today! Travel Requirement Up to 50% travel should be expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is not available for remote working Skills: Legal Disclaimer: We are an equal opportunity employer. We do not discriminate on the basis of protected characteristics like race, religion, color, sex, national origin, sexual orientation, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please _. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Job DescriptionReports To: General Manager or Owner "A mind built for excellence. A spirit built for service." What does a Restoration Estimator (RE) with Paul Davis do? • Serve your community when it needs it the most, • Communicate with clients and adjusters the scope and expectations for rebuild, • Celebrate completion of projects with homeowners, grateful to be back in their homes and businesses, along with your Project Managers and office team members, • Learn new things daily about scoping and signing construction projects, • Get results and set proper expectations for others, • Have fun and be part of a growing business and community!Restoration Estimators work with owners, adjusters, and Project Managers after traumatic events such as a fire or flood to clean up and repair damage to residential and commercial property. As a RE, you will be on scene after property disasters to accurately scope projects and sign work for our production teams to complete. You will build relationships with insurance professionals and communicate with property owners the expectations to build the structure back to its original form. Why The Team Needs You? Serving others in their time of need is not easy. We will need you to build foundational relationships based on trust, actively listen, and bring in work for project managers to complete. We also want a fun personality that enjoys getting results. Why Join The Team? We are an industry leader in restoration and reconstruction for insurance providers and commercial properties throughout the United States and Canada. Built upon principles of customer service, dynamic decision-making and leadership, we have the tools to continue our rapid growth. Our team puts emphasis into living our Vision, Mission and Values to be more than just a service provider our Restoration Estimators are on the front lines of restoring their communities by walking damaged properties and scoping estimates for full rebuilds. You will have the autonomy after training to control your schedule and continually seek learning opportunities that will improve your skill set. Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need Mission: To provide opportunities for great people to deliver Best in Class results Team Compensation and Benefits: • Ongoing Leadership Development Program and industry events, • One on One mentorship, • Three months of structured training to learn the Paul Davis Way, • Access to Paul Davis University and regular training opportunities, • Cell phone and computer provided by company, • Company vehicle and gas reimbursement, • PTO and sick days with flexible schedule, • Base commission. Our current REs yearly pay range from $50,000 to $75,000 with Bonus Potential Team Qualifications (Requirements): • Ability to clearly deliver truth and give certainty when property owners need it most, • Proficient with variety of current technology, • Career emphasis on learning and continuing education, • Sound planning and organizational skills, • Excellent communication and presentation skills, • Valid Drivers license and satisfactory driving record required, • Bachelors Degree or equivalent relevant experiencePrevious estimating experience (ex. Xactimate) is welcomed if willing to continually learn within industry. Industry certifications, including IICRC and Lead preferred. If limited experience but you meet all qualifications, we will invest in your training. Role on the Team (Job Functions): • Meet operational objectives of: Sales, Gross Margin, Brand Experience, • Track metrics during bi-weekly GS&R such as Net Promoter Score of 60, • Clearly communicate expectations with project manager and adjuster, onsite as needed, • Profitably scope estimates sign projects to get started, • Communicate and document any change orders and insurance supplements, • Ensure project completes within profit range and service level argreements are hit, • Participate in the on-call rotation, requiring evening and weekend point of contact for any new losses, as determined by the rotating schedule., • Participate in local community events, • Establish relationships with business owners, insurance professionals, and TPA's, • Seek partnerships to improve performance of the team Skills Desired of Team Member: • Self-motivated to get results, • Loves working people and enjoys estimating software, • Effectively schedules ahead while maintaining flexibility, • Excellent interpersonal skills, • Is succinct and professional with written communication, • Enjoys working hard and putting together agreements, • Servants heart to take care of others Are you Paul Davis? Before You Can Take the Field: Working Conditions and Physical Requirements: The physical environment requires the employee to work all types of both indoor and outdoor conditions. Frequently required to use personal protective equipment, having ability to stand or walk, occasionally bending, squatting, climbing stairs and lifting up to 50 pounds. Paul Davis is an equal opportunity employer.

Job Description Fire Sprinkler Designer / CAD Drafter Location: Memphis, TN (On-Site) Division: Fire Protection Company: State Systems, Inc. About State Systems, Inc. Founded in Memphis, TN, State Systems, Inc. is a total protection company providing fire protection, low voltage systems, and life-safety solutions across Tennessee, Arkansas, Mississippi, and Alabama. Our mission is simple: to protect life and property every day through integrity, innovation, and superior customer service. We’re seeking a detail-driven Fire Sprinkler Designer / CAD Drafter to help keep operations organized, efficient, and smooth. This role is ideal for someone who thrives in a fast-paced environment, can multitask effectively, and takes pride in precision. If you’re ready to grow with an always-evolving, family-oriented company—this is your opportunity. What You’ll Do As a Fire Sprinkler Designer / CAD Drafter, you’ll play a critical role in protecting people and property by producing accurate, code-compliant system designs that support our Fire Protection and Low Voltage teams. Key Responsibilities: Embody State Systems’ mission of protecting life and property in every project. Demonstrate knowledge of commonly used concepts, practices, and procedures using AutoCAD and other CAD platforms. Prepare project drawings, specifications, and schematics. Design layouts, perform field checks, create fabrication listings, material and equipment submittals, calculations, installation requirements, and close-out documentation. Ensure all designs comply with NFPA standards and maintain scope of company obligations. Support both Fire Protection and Low Voltage projects. Coordinate with project managers to ensure compliance with all Federal, State, and local codes. Interact professionally with customers, vendors, and coworkers. Utilize Microsoft Word, Excel, and Outlook for documentation and communication. Maintain organization, accuracy, and efficiency across multiple projects. Perform other duties as assigned. What We’re Looking For 2+ years of CAD experience. 2+ years using Windows-based AutoCAD design software. 1–2 years of Fire Sprinkler / Life Safety design experience. Proficiency in Microsoft Word and Outlook (2+ years). Strong organizational and multitasking skills. Ability to prioritize responsibilities in a fast-paced environment. Professional communication skills and collaborative mindset. Ability to work seated at a desk for a standard eight-hour workday. Compensation & Schedule Compensation: Based on education, experience, and credentials Schedule: Full-time | Monday–Friday | 8-hour shifts Payment Frequency: Biweekly Supplemental Pay: Referral Bonus What We Offer At State Systems, we reward performance and support your professional growth in a collaborative, safety-driven culture. Benefits include: 401(k) with company match Health, dental, and vision insurance Life, accident, critical illness, and hospital indemnity coverage Company phone or allowance and logo attire Flexible Spending & Health Savings Accounts Employee assistance & wellness programs Paid time off and holiday pay Professional development and advancement opportunities Referral and retirement programs Pet insurance and other voluntary benefits Wellness programs designed to support your best health Company Overview State Systems, Inc. is a privately owned total protection company headquartered in Memphis, TN. With divisions in Fire Protection, Cleaning Services, Technology, and Fire Alarm, we deliver comprehensive safety and facility protection solutions across the Mid-South. Our certified professionals provide high-quality, code-compliant systems and exceptional customer service backed by decades of experience. Join a Leader in Life Safety If you’re ready to grow your career in fire protection design and join a company that values integrity, teamwork, and excellence, apply today to join State Systems, Inc.—a company built on trust and protecting what matters most. Texting Privacy Policy and Information: Message type: Informational; you will receive text messages regarding your application and potentially regarding interview scheduling. Message frequency will vary depending on the application process. Msg & data rates may apply. OPT out at any time by texting “Stop.” Pre-Employment Screening: All employment offers are contingent upon successful completion of a background check and drug screening, in accordance with applicable laws and company policy. SSI Fire & Safety is an Equal Opportunity Employer committed to diversity and inclusion. Powered by JazzHR 29KAgfQvZE

Job Description Here at Atlantic Track & Turnout Co., we lead the way for manufacturing, supply, and service for railroads, transit systems, and crane runways. We’re proud to be employee-owned and take great pride in the exceptional results we consistently deliver for our partners and customers. For over 60 years, Atlantic Track has put our people first to foster strong teams, products, and services that are second to none. We’re currently seeking a Mechanical Maintenance Manager to join our growing team in Memphis, Tennessee. The selected candidate will ensure all production equipment within our facilities works properly and runs smoothly. This position is a vital part of our everyday operations, as safety for our employees and machine upkeep are critical here at Atlantic Track. This position supports our first shift which operates from 6:00am to 2:30pm Monday through Friday. Roles and Responsibilities: • Administers computerized maintenance management system (CMMS), • Manages Technician team scheduling and work orders, • Trains junior Technicians and conducts continuous performance evaluation and improvement, • Liaises with Safety team to assign projects for site improvement and/or modification, • Troubleshoots equipment issues, • Regularly lubricates equipment, • Orders maintenance supplies/parts, • Follows preventative maintenance program for equipment and facility, • Assists with equipment installations, • Maintains a clean, organized, and safe maintenance shop and facility, • Operates forklift, overhead cranes, and personal lifts, • Assures safety and adherence to all regulatory requirements, • Works with Computer Numerical Control (CNC) Controls / Programmable Logic Controller (PLC), • Diagnoses and repairs mechanical, hydraulic, and pneumatic problems, • Works with multi-meter and performs checks on AC/DC electricity up to 500 volts, • Works safely in a non-climate-controlled environment Minimum Qualifications: • High school diploma or equivalent (GED, HiSET, TASC, etc.), • Minimum of 8 years of mechanical maintenance experience in a manufacturing environment, • Minimum of 2 years of supervisory experience and/or experience as a team lead, • Occupational Safety and Health Administration (OSHA) 30-hour certification, • Ability to lift and move objects weighing up to 50 lbs., • Ability to work on-site in Memphis, Tennessee Preferred Qualifications: • Associate’s or technical degree, • Self-motivated and able to work with minimal supervision, • Team player who can work with others and communicate/relay technical knowledge in a clear and understandable manner, • Experience with Limble CMMS, • Development Dimensions International (DDI) leadership development course completion, • National Fire Protection Association (NFPA) Standard for Electrical Safety in the Workplace (NFPA 70E) certification, • Haas Automation, DN Solutions, or other CNC machining training or certification Atlantic Track offers a holistic benefits package, including competitive pay, 401k plan with company matching funds, health / dental / vision insurance options, life insurance, paid time off, an employee shared ownership plan, and more. We are proud to be an equal opportunity employer. Company DescriptionAtlantic Track & Turnout Co. A Railroad Manufacturing and Supply Company: We’re your single-source solution for Class I and heavy haul railroads, light rail transits, railroad contractors, and industrial enterprises. A Transit System Solutions Supplier: We offer a complete system for your transit needs—from specialized products and product expertise to complete project management. A Crane Runway Solutions Provider: Atlantic Track is the largest integrated and diversified supplier of crane runway materials and services in the country. Since 1964, we have been continuously investing in and expanding our equipment, manufacturing, and distribution capabilities. Our strategically located sales, manufacturing, and distribution facilities across the country ensure prompt customer service. By building a robust inventory and maintaining a national footprint, we can provide more efficient and cost-saving direct delivery. We are an integrated, single-source solution for all of your railroad, transit and crane runway needs.Atlantic Track & Turnout Co.\r\n\r\nA Railroad Manufacturing and Supply Company: We’re your single-source solution for Class I and heavy haul railroads, light rail transits, railroad contractors, and industrial enterprises.\r\n\r\nA Transit System Solutions Supplier: We offer a complete system for your transit needs—from specialized products and product expertise to complete project management.\r\n\r\nA Crane Runway Solutions Provider: Atlantic Track is the largest integrated and diversified supplier of crane runway materials and services in the country.\r\n\r\nSince 1964, we have been continuously investing in and expanding our equipment, manufacturing, and distribution capabilities. Our strategically located sales, manufacturing, and distribution facilities across the country ensure prompt customer service. By building a robust inventory and maintaining a national footprint, we can provide more efficient and cost-saving direct delivery. We are an integrated, single-source solution for all of your railroad, transit and crane runway needs.

Job DescriptionYou will provide support to the Project Staff and the Concrete Strategies safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. This is a full-time traveling position. Responsibilities: • Assist in development of the project safety program., • Establish and conduct jobsite orientation for new project employees., • Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program., • Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program., • Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor’s activity on site., • Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance., • Facilitate training for site personnel and ensure that standards are per the OSHA\Concrete Strategies and in compliance with Federal and State standards., • Ensure and maintain a log of each subcontractor toolbox safety meeting., • Review each subcontractors safety program and ensure that it meets or exceeds the project safety program requirements., • Ensure that each subcontractor designates a safety representative that is properly trained in subcontractors scope of work and has the proper authority to correct safety issues., • Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions., • Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions., • Stop at once any violation or unsafe acts or practices., • Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation and fire control procedures., • Investigate all incidents and generate proper reports., • Establish and maintain all required safety records., • Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues., • Perform other duties as necessary. Qualifications: • Strong management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing., • At least (3) years of safety experience or combination of education/multiple years experience in building construction., • With a working knowledge of safety/environment principles and techniques., • OSHA 30-hour construction accreditation., • OSHA 500 Outreach Trainer is a plus., • Computer skills with familiarity with Microsoft Office.

Job Description About McCabe Restoration McCabe Restoration, based in Memphis, TN, is a leading provider of restoration services dedicated to helping individuals and businesses recover from unforeseen disasters. With a strong commitment to quality, integrity, and customer satisfaction, McCabe Restoration offers a comprehensive range of services, including water damage restoration, fire and smoke damage restoration, mold remediation, and reconstruction. Our experienced team utilizes state-of-the-art equipment and industry best practices to deliver efficient and effective solutions, restoring properties and peace of mind. We pride ourselves on our professionalism, rapid response, and unwavering dedication to our clients throughout the entire restoration process. Job Description Administrative & Documentation Support Enter Customer job information into Job Database (RM, PSA), ensuring thorough and accurate data entry. Send DocuSign Work Authorizations/Contracts to customers for electronic signature after estimate approval in coordination with the Estimator, ensuring payment schedules are outlined in the contract. Handle the processing of trade and supplier invoices to include: Match invoices to purchase orders and flag outliers Review invoices with project managers to secure approval Prepare invoices, and forward to estimator to deliver to customer for payment. Assist in the budgeting process to include: Import estimate into job management system, PSA, if not completed by estimator Review work orders and overall budget to ensure it aligns with company targets Distribute work orders (subcontracts) to trade partners(subcontractors) as identified by the PM’s. Purchase Order must be obtained to move the subcontract. Assist in the creation of job schedules and coordinate changes with the PM’s as necessary Follow up on the payment schedules and ensure collections align with the agreed terms. Attend WIP meetings and coordinate outcomes from the meetings Ensure adherence to company change order policy and assist PM’s and Estimators as necessary in the CO process Sent out by DocuSign and deposits collected prior to any work starting. Third-Party Administrator (TPA) Monitoring Daily monitoring of TPA platforms, including Contractor Connection, Westhill, Sedgwick, etc. Ensure compliance with TPA guidelines and maintain best-in-class performance rankings. Follow up with adjusters for estimate approvals and supplement requests when the estimator requests assistance. Make sure all photos are labeled when needed. The estimator is to copy the PC on all estimates and supplements sent to the adjuster or carrier. Job Tracking & Reporting Attend weekly meetings with VP of Construction, Estimators and PM’s to review all assigned jobs: Received, Scoped, Pending, Sold, WIP (Work in Progress), and Completed. Ensure weekly job notes are updated. If a job remains in the same status for multiple weeks, escalate the issue to the VP of Construction Track collected vs. collections on jobs and alert the VP of Construction if any job exceeds $25,000 in collections. Flag jobs that have started without deductible or deposit collection or a proper draw schedule and notify the VP of Construction. Assist the PM in sending a Punch List to the insured via DocuSign. The PM will provide pictures and all items that need to be completed, and the PC will compile a list and send it to the insured for sign-off Follow up with PM to submit marked complete supervisor estimate to PC for filing. Accountability & Performance Metrics Weekly job status reports shared with PMs and VP of Construction. Attend bi-weekly WIP meetings with VP of Construction Key Performance Indicators (KPIs): TPA compliance and POM scores Job status updates completed weekly Invoice & Contract accuracy rate Number of delayed or on hold jobs Contract & Invoice creation & follow up turnaround time Additional Responsibilities Ensure all claim information is collected, including deductible. Confirm job has been approved for production. Collect ATRs (Authorization to Repair), contracts, COCs (Certificate of Completion aka signoffs), TPAs (Third Party Administrator required documents), Cos (Change Orders), and other documentation. Request EagleView reports as needed. Maintain and update weekly progress notes. Ensure TPA compliance and complete necessary uploads. Prepare and process lien waivers. Compile and submit marked supervisor estimate and supporting paperwork. Coordinate temporary assignments as needed. Assist Estimators in communications with customers, agents, adjusters, and TPAs. Enter project dates accurately into Databases (RM, PSA) (and corresponding TPA systems). Assist Estimators in uploading and organizing job photos in TPA portals, as needed Job Type: Full-time Pay: $40,482.00 - $50,828.00 per year

Job DescriptionPurchasing Manager House Buyers of America is looking for a Purchasing Manager who will be responsible for bidding, managing and negotiating all contracts for our home renovations. This person will oversee all aspects of purchasing including developing detailed scopes of work and recruiting new contractors/ vendors. This is a 100% remote role. What you will do: • Bid out and manage all contracts, submit invoices, track project budgets and work with Field Managers to ensure contractors are performing work per the contract, • Negotiate the lowest cost possible (national production builder pricing) and creatively source newer products to help lower costs and improve quality/ aesthetic appeal of our renovations, • Partner with senior management to determine spec levels, • Develop detailed scopes of work and budgets for each renovation job, • Manage, train and fire General contractors and subcontractors., • Constantly recruit new contractors and vendor relationships through networking and cold calls. Ensure contractors are properly registered prior to starting jobs. About you: • You have 5+ years of purchasing experience with a major home builder and remodeling company, • You have excellent computer skills (including Microsoft Office), • You have a Bachelor's Degree or higher, • You understand and can speak some Spanish (nice to have) Why we are a great place to work: • Our company is FULLY REMOTE!, • Our awesome company culture includes: competitive pay great benefits, great people, casual dress, team events, work hard/ play hard environment!, • Revenue increased 67% year over year Jan-Nov 2025, • Acquisitions increased 71% year over year Jan-Nov 2025, • Dispositions increased 70% year over year Jan-Nov 2025, • We're continuing our nationwide expansion. Over the last year we've expanded to 44 states and Washington DC! House Buyers of America is a residential real estate investment company founded in 2001 and headquartered in Tyson's Corner, VA. We buy, renovate, and resell a high volume of homes offering a guaranteed, fast, and hassle-free sale to people who want to sell their house without paying a Realtor commission. We have a history of strong growth and success, having bought and sold thousands of houses. Our Company went from $0 to $50 million in annual revenue in its first 3 years in business and won the Ernst and Young Entrepreneur of the Year award. Buyers of America is proudly a member of the Inc 5000 list. House Buyers is an equal opportunity employer and does not discriminate by sex, creed, race, or by age. www.HouseBuyersOfAmerica.com

Job Description Join EAD to help solve complex controls and automation challenges in industrial facilities. EAD supports projects across industrial manufacturing facilities, including food processing, pharmaceutical manufacturing, and parcel handling environments. This role offers the opportunity to lead a controls engineering team across projects of varying size and complexity in a fast-paced, multi-discipline, and practical engineering setting. The Controls Engineer delivers accurate, practical, and high-quality controls engineering for industrial and manufacturing facilities. This role is responsible for control system design, programming, field support, troubleshooting, and cross-discipline coordination. EAD expects strong performance at every level: Staff Controls Engineer is expected to perform well in front of clients, work effectively in demanding on-site environments, and take ownership of their work. This role requires sound judgment in active industrial facilities where field conditions, client operations, and project timelines demand a composed, adaptable, and resourceful engineer. What Success Looks Like In this role, success means: • Delivering controls engineering work that is accurate, on time, on budget, and meets client and project requirements., • Producing functional, buildable, and well-documented control system solutions., • Coordinating effectively with project teams, other disciplines, and clients., • Performing confidently and professionally in field environments, including commissioning, startup, and troubleshooting., • Continuously building technical skills and discipline versatility., • Owning your role in the success of the project by asking questions, closing loops, and learning fast. Level Expectations Staff Controls Engineer (7-10 years of experience) • Actively leads the controls engineering scope on assigned projects, including technical direction, schedule ownership, and client coordination., • Leads controls input to proposals and estimates, including scope definition, hours forecasting, and risk identification., • Mentors and supports less experienced engineers through technical guidance and project collaboration., • Serves as a primary technical point of contact for clients, vendors, and project teams on controls matters., • Leads design reviews and drives quality within the controls scope. Key Responsibilities • Design, program, and commission PLC and DCS-based control systems for industrial and manufacturing facilities., • Develop and configure HMI and SCADA applications to meet client and project requirements., • Perform field activities including existing-condition verification, construction support, system checkout, commissioning, startup, and troubleshooting., • Coordinate with mechanical, electrical, process, and other project team members to ensure controls scope aligns with overall project design and intent., • Prepare clear engineering deliverables including control system design documentation, specifications, instrument lists, and panel design input., • Support proposals and estimates with technical input, hours estimates, and scope definition appropriate to level., • Participate in and contribute to design reviews, quality checks, and lessons learned., • Interface with clients, vendors, contractors, and construction teams professionally and effectively., • Maintain knowledge of applicable codes and standards such as National Electrical Code (NEC), National Fire Protection Association (NFPA), Underwriters Laboratories (UL), and International Society of Automation (ISA)., • Communicate proactively with the project team and Discipline Lead regarding progress, issues, risks, and decisions., • Contribute to a safe working environment and follow EAD safety standards and practices. Required Qualifications • Bachelor's degree in Electrical Engineering, Controls Engineering, or a related technical field; equivalent combination of education, military service, training, and experience may also be considered., • Staff: 7–10 years of controls engineering experience in industrial or manufacturing environments., • Experience with PLC and/or DCS-based control system design, programming, and troubleshooting., • Experience with HMI or SCADA programming and configuration., • Experience performing field work including commissioning, startup, and troubleshooting in active industrial facilities., • Experience working with multi-discipline project teams., • Strong written and verbal communication, including the ability to interact effectively with clients, project teams, and field personnel., • Ability to manage time, prioritize tasks, and deliver results within cost and schedule constraints. Preferred Qualifications • Experience in food and beverage, life sciences, pharmaceutical, parcel, or other industrial manufacturing environments., • Experience with Rockwell / Allen-Bradley platforms including ControlLogix and CompactLogix., • CAP, CCST, PE, or similar relevant credentials, or commitment to pursuing one., • Knowledge of NEC, NFPA, UL, and ISA codes and standards., • Experience supporting or leading controls input to proposals and cost estimates., • Professional Engineer (PE), Project Management Professional (PMP), Certified Automation Professional (CAP), or similar relevant credentials., • Established industry relationships and a demonstrated ability to build client trust, support repeat business, and contribute to growth are strongly preferred. Behavioral Expectations • Acts with integrity, sound judgment, and professionalism., • Owns commitments, follows through, and closes loops., • Communicates early and clearly when risks, questions, or changes arise., • Works in a way that helps the broader project team succeed., • Brings a practical, solution-oriented mindset to complex fields and project challenges., • Seeks to understand field conditions, client needs, and cross-discipline impacts before acting. Working Conditions • Office, plant, or client site environment*, • Ability to perform field and client-site work., • Ability to sit and work at computer for extended periods of time, • Ability to walk up numerous flights of stairs or ladders multiple times a day and/or work in tight spaces in extreme conditions, • May work near moving mechanical parts and equipment*, • Office, commercial and/or industrial setting with the potential of exposure to fumes or airborne particles, toxic or caustic chemicals*, • Ability to lift and/or move up to 50 lbs.*, • Travel required, with periods of significant travel depending on project needs., • Occasional night shift work may be required based on client operations and project schedules, though this is infrequent., • Periodic weekend, holiday or evening work as needed, • Maintain a valid driver's license. *EAD will provide training, administrative/engineering controls, and personal protective equipment as necessary. We strongly believe that diversity of experience, perspectives, and background will lead to a better workplace for our employees and a better product for our customers. EAD is an Equal Opportunity Employer Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice.

Job DescriptionFire Sprinkler Apprentice Location: Memphis, TN (On-Site) Division: Fire Protection Company: State SystemsAbout State Systems Founded in Memphis, TN, State Systems is a total protection company providing fire protection, low voltage systems, and life-safety solutions across Tennessee, Arkansas, Mississippi, and Alabama. Our mission is simple: to protect life and property every day through integrity, innovation, and superior customer service.What You’ll Do We are seeking a motivated and dependable Fire Sprinkler Apprentice to join our growing fire protection team. This is an excellent opportunity for someone looking to build a long-term career in the fire sprinkler industry while learning from experienced, licensed professionals. Key Responsibilities • Assist licensed sprinkler fitters with installation, service, inspection, and repair of fire sprinkler systems, • Load, unload, and organize tools, pipe, fittings, and materials, • Cut, thread, assemble, and bond piping and tubing according to specifications under foreman supervision, • Maintain safe work practices, tools, and equipment., • Follow company procedures, safety policies, and NFPA standards, • Travel to job sites as required, • Operate mobile devices (tablet/PDA) for field documentationQualifications, • High school diploma or GED preferred, • Mechanical aptitude and willingness to learn a skilled trade, • Ability to lift 50+ lbs. and work on ladders, lifts, and in various environments, • Strong work ethic, reliability, and positive attitude, • Valid driver’s license and clean driving record preferred, • Prior construction or fire protection experience is a plus, but not required What We’re Looking For, • High school diploma or GED required., • Advanced technical school training or related work experience preferred., • 1+ years of fire sprinkler experience - preferred., • Working knowledge of hand tools, including electric and battery-powered equipment., • Basic computer skills: familiarity with Microsoft Office Suite (Excel preferred)., • Strong communication and problem-solving skills., • Physically capable of lifting 50 lbs. repeatedly and up to 100 lbs. occasionally., • Comfortable working outdoors and in confined spaces., • Valid driver’s license and clean driving record., • NICET certification (preferred).Compensation Hourly Rate: $18–$25.00 (based on experience, education, and certifications) Advancement opportunities into licensed sprinkler fitter roles — where experienced fitters in Tennessee can earn significantly more (technicians often average above $30-$40 per hour depending on experience and certifications)What We Offer At State Systems, we reward performance and support your professional growth in a collaborative, safety-driven culture. Benefits include: • 401(k) with company match, • Health, dental, and vision insurance, • Life, accident, and critical illness coverage, • Company vehicle (if applicable), phone allowance, and logo attire, • Flexible Spending & Health Savings Accounts, • Paid time off and holiday pay, • Employee assistance and wellness programs, • Opportunities for advancement and professional development, • Referral program and retirement plan, • Pet insurance and other voluntary benefitsSchedule: Full-time | Monday–FridayCompany Overview State Systems is a privately owned total protection company headquartered in Memphis, TN. With divisions in Fire Protection, Cleaning Services, Technology, and Fire Alarm, we provide comprehensive life-safety solutions with integrity and expertise. Our certified technicians deliver quality, compliant systems designed to protect lives and property. Learn more at www.statesystemsinc.com.Join a Leader in Life Safety If you’re ready to grow your career in fire protection, apply today to join State Systems, a company built on trust, excellence, and protecting what matters most. Texting Privacy Policy and Information: Message type: Informational; you will receive text messages regarding your application and potentially regarding interview scheduling. Message frequency will vary depending on the application process. Msg & data rates may apply. OPT out at any time by texting “Stop.” Pre-Employment Screening: All employment offers are contingent upon successful completion of a background check and drug screening, in accordance with applicable laws and company policy. SSI Fire & Safety is an Equal Opportunity Employer committed to diversity and inclusion. Powered by JazzHR p4csLmT5ej

Job DescriptionHigher Level BCSP Cert Required CHST / GSP / ASP / CSP You will provide support to the Project Staff and the Concrete Strategies safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. This is a full-time traveling position. Responsibilities: • Assist in development of the project safety program., • Establish and conduct jobsite orientation for new project employees., • Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program., • Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program., • Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor’s activity on site., • Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance., • Facilitate training for site personnel and ensure that standards are per the OSHA\Concrete Strategies and in compliance with Federal and State standards., • Ensure and maintain a log of each subcontractor toolbox safety meeting., • Review each subcontractors safety program and ensure that it meets or exceeds the project safety program requirements., • Ensure that each subcontractor designates a safety representative that is properly trained in subcontractors scope of work and has the proper authority to correct safety issues., • Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions., • Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions., • Stop at once any violation or unsafe acts or practices., • Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation and fire control procedures., • Investigate all incidents and generate proper reports., • Establish and maintain all required safety records., • Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues., • Perform other duties as necessary. Qualifications: • Strong management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing., • At least (3) years of safety experience or combination of education/multiple years experience in building construction., • With a working knowledge of safety/environment principles and techniques., • OSHA 30-hour construction accreditation., • OSHA 500 Outreach Trainer is a plus., • Computer skills with familiarity with Microsoft Office., • Bilingual is a plus.

Job DescriptionDescription:School Building Engineer Gestalt Community Schools Position Summary The School Building Engineer is responsible for ensuring a safe, clean, healthy, and well-maintained learning and working environment for scholars, staff, and the school community. This essential position oversees building operations, preventative maintenance, repairs, custodial services, and facility-related projects, while ensuring the efficient operation of mechanical, electrical, plumbing (MEP), and building systems. The role collaborates closely with school leadership, operations teams, and external vendors and provides support across the GCS network as needed. Key Responsibilities • Perform inspections, preventative maintenance, and general repairs of building systems, equipment, and grounds., • Ensure facilities are safe, functional, clean, and prepared daily for students and staff., • Oversee and direct custodial staff and services., • Monitor and maintain HVAC, electrical, plumbing, security, lighting, and ventilation systems., • Respond to emergency situations and support school operations during critical or inclement conditions., • Utilize the maintenance ticketing system and maintain accurate logs of work performed., • Coordinate and manage special projects, capital improvements, deferred maintenance, and grant-funded work., • Identify work beyond scope and recommend qualified contractors with specifications., • Ensure compliance with all applicable fire, safety, health, environmental, and building regulations., • Maintain tools, equipment, parts, and supplies necessary for facility operations., • Communicate effectively with administrators, staff, students, parents, and external partners., • Maintain confidentiality and uphold ethical and professional standards., • Perform additional duties as assigned and permitted by law.Qualifications, • High school diploma or equivalent required., • Minimum of three (3) years of verifiable maintenance and repair experience in educational, medical, or office settings or certification/licensure in Mechanical, Electrical, Plumbing, or a related field (preferred)., • Valid driver’s license with an acceptable driving record., • Strong interpersonal, communication, and organizational skills., • Demonstrated integrity, initiative, and professionalism., • Ability to communicate effectively in English., • Authorization to work in the United States (Form I-9 compliance required). Requirements:Physical & Environmental Requirements • Ability to lift, carry, stand, walk, reach, and operate tools and equipment., • Visual, auditory, and communication abilities sufficient to perform job duties., • Exposure to varying weather conditions, cleaning chemicals, and a school environment that may be moderately noisy., • Reasonable accommodations may be made in accordance with applicable law.

Job DescriptionGeneral Description:As a Sr. Site Safety Manager, you will provide support to the Project Staff and the Concrete Strategies safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. Responsibilities: • Assist in development of the project safety program., • Establish and conduct jobsite orientation for new project employees., • Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program., • Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program., • Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor’s activity on site., • Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance., • Facilitate training for site personnel and ensure that standards are per the OSHA\Concrete Strategies and in compliance with Federal and State standards., • Ensure and maintain a log of each subcontractor toolbox safety meeting., • Review each subcontractors safety program and ensure that it meets or exceeds the project safety program requirements., • Ensure that each subcontractor designates a safety representative that is properly trained in subcontractors scope of work and has the proper authority to correct safety issues., • Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions., • Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions., • Stop at once any violation or unsafe acts or practices., • Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation and fire control procedures., • Investigate all incidents and generate proper reports., • Establish and maintain all required safety records., • Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues., • Perform other duties as necessary. Qualifications: • Strong management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing., • Education/Experience:, • B.S. in Safety and Health or equivalent., • At least two (4) years of safety experience or combination of education/multiple years experience in building construction, with a working knowledge of safety/environment principles and techniques., • Bilingual in Spanish and intercultural communication skills is preferred., • Computer skills with familiarity with Microsoft Office. Working Conditions:Physical requirements: • Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus., • Requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl., • Occasionally lift and/or move up to 75 pounds., • Regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places, fumes or airborne particles, outside weather conditions and risk to electrical shock.

Job DescriptionABOUT xAI xAI's mission is to create AI systems that can accurately understand the universe and aid humanity in its pursuit of knowledge. Our team is small, highly motivated, and focused on engineering excellence. This organization is for individuals who appreciate challenging themselves and thrive on curiosity. We operate with a flat organizational structure. All employees are expected to be hands-on and to contribute directly to the company's mission. Leadership is given to those who show initiative and consistently deliver excellence. Work ethic and strong prioritization skills are important. All employees are expected to have strong communication skills. They should be able to concisely and accurately share knowledge with their teammates. ABOUT THE ROLE: As an Architectural Designer for the Data Centers, you will lead the strategic planning, design, and execution of facilities and infrastructure solutions for xAI's data centers and site builds. Drawing on expertise in complex, multi-stakeholder projects, you'll collaborate across engineering, procurement, construction, and business teams to deliver integrated, compliant designs that align with aggressive timelines and innovation goals. This position reports to the Facilities Leadership team and is an opportunity that requires travel to different locations and cross-site collaboration. RESPONSIBILITIES: • Support the planning, design, and construction of advanced data centers and AI infrastructure, including high-performance computing facilities at new and existing sites., • Collaborate with civil, structural, MEP, and fire protection disciplines, as well as procurement and construction teams, to develop integrated solutions optimized for scalability, efficiency, and reliability., • Create Basis of Design documents and Request for Quotation (RFQ) packages for external consultants, architects, and vendors; respond to RFIs and iterate based on feedback., • Conduct site visits and assessments to refine designs, incorporating existing site conditions, risk mitigation strategies, and delivery objectives for seamless project execution., • Ensure compliance with local building codes, zoning, and environmental standards while providing technical guidance on architectural elements., • Assist in scoping, estimating, and executing facility and infrastructure projects critical to AI operations and business continuity., • Build and maintain strong cross-functional partnerships with internal stakeholders, including engineering leads, operations teams, and executive leadership, to align on project expectations and streamline workflows., • Develop architectural designs, including drafting, 3D modeling, renderings, and documentation using Revit, AutoCAD, SketchUp, and related tools, • Oversee external partners (architects, engineers, builders, vendors) to ensure design excellence, cost-effective procurement, and adherence to Master Service Agreements (MSAs).BASIC QUALIFICATIONS:, • Bachelor's degree in Architecture from an accredited institution., • Active Architectural licensure; NCARB certification strongly preferred., • 2+ years of progressive experience in architectural design and project management, with direct hands-on involvement in data center development, and site construction in high-tech environments., • Proven track record leading complex, multi-disciplinary projects in fast-scaling organizations (e.g., automotive, tech, or AI infrastructure).PREFERRED SKILLS AND EXPERIENCE:, • Expertise in high-performance computing facilities, such as supercomputer deployments or AI-optimized data centers., • Proficiency in design and collaboration tools: AutoCAD/Revit, SketchUp, Jira/Bluebeam, Adobe Creative Suite, Microsoft Office Suite., • Experience delivering flagship projects for leading tech companies (e.g., HQ relocations, R&D labs, wellness centers with integrated data infrastructure)., • Strong background in global portfolio management, including lease scenario planning and cross-functional collaboration with IT, security, HR, and legal teams., • Familiarity with agile project methodologies for rapid prototyping, site adaptations, and vendor negotiation xAI is an equal opportunity employer. For details on data processing, view our Recruitment Privacy Notice.

Job DescriptionABOUT xAI xAI's mission is to create AI systems that can accurately understand the universe and aid humanity in its pursuit of knowledge. Our team is small, highly motivated, and focused on engineering excellence. This organization is for individuals who appreciate challenging themselves and thrive on curiosity. We operate with a flat organizational structure. All employees are expected to be hands-on and to contribute directly to the company's mission. Leadership is given to those who show initiative and consistently deliver excellence. Work ethic and strong prioritization skills are important. All employees are expected to have strong communication skills. They should be able to concisely and accurately share knowledge with their teammates. ABOUT THE ROLE: The xAI datacenter control systems team is looking for a highly-motivated Controls Engineer to support the operation, design, and optimization of our advanced data center infrastructure. This person will play a key role in maintaining the stability and efficiency of the systems that power xAI's groundbreaking AI research. The Controls Engineer will collaborate with cross-functional teams to monitor and improve the performance of the data center throughout its lifecycle. This individual will work closely with Operations and Maintenance to ensure the systems are running smoothly, from day-to-day management to long-term upgrades and expansions. RESPONSIBILITIES: • Executing the implementation and modification of Building Management System (BMS), Electrical Power Management System (EPMS), and any other SCADA systems critical for the operation of current and future data centers, • Overseeing the operation of critical systems such as chillers, pumps, and power distribution, using PLCs and other industrial control technologies, • Preparing specifications for Human-machine Interface (HMI) including graphics standard for interpretation by Grok, • Implementing and maintaining automated controls for fire safety and emergency shutdown procedures (ESOP), • Developing a corporate-level reporting dashboard to monitor the operational trends such as power usage effectiveness (PUE) and performance/cost, and dynamically adjust the infrastructure set points for optimal performance, • Coordinating with utility providers to automate demand and operational responses to upstream grid eventsBASIC QUALIFICATIONS:, • Bachelor's Degree in an Engineering discipline: Controls and Computer Control Systems, Computer Science, Mechatronic Engineering, Automation Engineering, etc., or equivalent experience, • 5+ years of experience as a hands-on Controls Engineer working with industrial control systems, • Ignition SCADA Programming Experience, • Siemens TIA Portal PLC Programming Experience, • Physical Requirements:, • Ability to work for extended periods of time standing, when needed, • Work is often performed in tight quarters and physical dexterity is necessary to perform job functions, • Comfortable working in an environment requiring exposure to noise, • Ability to lift or carry 10-15lbs, • Ability to work evenings and weekends as needed, • Position is subject to pre-employment drug and random drug and alcohol testingPREFERRED SKILLS AND EXPERIENCE:, • Advanced proficiency in programming industrial equipment in all IEC 61131-3 languages with a focus on structured text and ladder logic, • Experience with industrial control hardware from leading manufacturers (e.g. Siemens, SEL, Rockwell), • Familiarity with Human Machine Interface (HMI / GUI) development using platforms such as Ignition, SEL, etc, • Methodical troubleshooting approach, • Strong documentation and communication skill set, • Technical project management mindset, • Team-player, takes initiative, and highly motivated xAI is an equal opportunity employer. For details on data processing, view our Recruitment Privacy Notice.

Job DescriptionSalary: $20.00 - $21.63 per hour Residential Shift Supervisor Youth Behavioral Health Location: Bartlett, TN Department: Operations Job Type: Full-Time Pay: $20.00 - $21.63 per hour About Youth Opportunity and Bartlett Primary Assessment Center Youth Opportunity is a nationally recognized leader in residential and behavioral health treatment for atrisk youth. Bartlett Primary Assessment Center in Bartlett, Tennessee is a shortterm, traumainformed assessment facility serving youth in need of stabilization and behavioral evaluation. Youth typically remain in care for approximately 30days, during which they receive structured intake, education, multidisciplinary assessment, and life skills programming. Small group settings support emotional safety, initial stabilization, and planning for an appropriate subsequent placement. Residential Shift Supervisor Job Benefits • Medical, dental, and vision insurance, • 401(k) with up to 4% employer match with immediate vesting, • Paid time off (PTO) and 7 paid holidays (Earn 4 hours of PTO each pay period), • Free RX delivery on most medications, • Tuition reimbursement and professional development, • Robust Employee Assistance Program, • Supportive, mission-driven work environment Why Join Youth Opportunity? • Be part of a team making a difference in the lives of vulnerable youth, • Gain experience in a growing field of youth mental health and residential care, • Work in a secure, structured, and supportive treatment environment, • Develop your skills through training, mentorship, and advancement opportunities Position Summary Residential Shift Supervisor Job in Bartlett, TN We are hiring a Residential Shift Supervisor to oversee daily operations and staff during assigned shifts. This role is ideal for professionals looking to grow in youth residential services and behavioral health. The Shift Supervisor ensures the safe and effective operation of the facility and provides leadership and direction to staff working directly with youth in our care. Residential Shift Supervisor Responsibilities • Supervise staff, assign duties, evaluate performance, and provide training and corrective guidance, • Assist with developing staff schedules and ensuring adequate coverage for safe and effective facility operations, • Monitor facility security and ensure compliance with state regulations and agency policies, • Oversee youth behavior management, review incidents, and investigate grievances, • Supervise medication administration and ensure accurate documentation, • Assist with youth appointments, transports, and intake/discharge procedures, • Communicate regularly with leadership regarding staffing, safety, and operational concerns, • Conduct security checks, monitor electronic systems, and oversee room searches as needed, • Provide emergency response coordination during incidents such as fire or severe weather Other Duties Include • Maintain a high standard of role model behavior for youth, • Participate in required training and professional development, • Report incidents or concerns regarding youth safety or staff conduct, • Document shift events, staffing updates, and incidents according to policy, • Perform other duties as assigned or needed Required Qualifications • High School Diploma required; Bachelors Degree preferred, • Minimum of 3 years experience working with youth in a residential setting required, • Prior supervisory experience preferred, • Ability to assess youth with substance abuse, mental health, and trauma history, • Must pass background check and drug screening Preferred Skills • First Aid/CPR certified (or ability to obtain during probationary period), • Strong leadership, supervision, and conflict resolution skills, • Excellent written and verbal communication, • Ability to collaborate with law enforcement, probation, courts, and caseworkers, • Sensitivity to cultural, gender, and individual differences Physical Demands Must be physically healthy and emotionally stable. Ability to engage with youth, participate in activities, and intervene physically if needed. Must be free from communicable diseases as defined by the state. Ability to pass evaluations for physical techniques and written certification exam. Other Requirements • Valid drivers license and safe driving record required, • Must meet state criminal background check requirements, • Must be at least 21 years of age, • Ability to work extended, evening, and/or weekend hours as needed How to Apply Click Apply Now through Indeed to submit your application. Or visit http://www.youthopportunity.com/yourfuture to learn more about our mission and career opportunities. Youth Opportunity is an Equal Opportunity Employer.

Job Description Join EAD to help solve complex controls and automation challenges in industrial facilities. EAD supports projects across industrial manufacturing facilities, including food processing, pharmaceutical manufacturing, and parcel handling environments. This role offers the opportunity to lead a controls engineering team across projects of varying size and complexity in a fast-paced, multi-discipline, and practical engineering setting. The Controls Engineer delivers accurate, practical, and high-quality controls engineering for industrial and manufacturing facilities. This role is responsible for control system design, programming, field support, troubleshooting, and cross-discipline coordination. EAD expects strong performance at every level: Associate Controls Engineer is expected to perform well in front of clients, work effectively in demanding on-site environments, and take ownership of their work. This role requires sound judgment in active industrial facilities where field conditions, client operations, and project timelines demand a composed, adaptable, and resourceful engineer. What Success Looks Like In this role, success means: • Delivering controls engineering work that is accurate, on time, on budget, and meets client and project requirements., • Producing functional, buildable, and well-documented control system solutions., • Coordinating effectively with project teams, other disciplines, and clients., • Performing confidently and professionally in field environments, including commissioning, startup, and troubleshooting., • Continuously building technical skills and discipline versatility., • Owning your role in the success of the project by asking questions, closing loops, and learning fast. Level Expectations Associate Controls Engineer (3-6 years of experience) • Delivers quality controls engineering work with growing independence under the guidance of a Discipline Lead or senior team member., • Performs well in front of clients and in demanding on-site situations., • Supports proposals and estimates by contributing technical input and hours estimates., • Actively builds skills across control system platforms, field environments, and project types., • Participates in design reviews and contributes to quality assurance. Key Responsibilities • Design, program, and commission PLC and DCS-based control systems for industrial and manufacturing facilities., • Develop and configure HMI and SCADA applications to meet client and project requirements., • Perform field activities including existing-condition verification, construction support, system checkout, commissioning, startup, and troubleshooting., • Coordinate with mechanical, electrical, process, and other project team members to ensure controls scope aligns with overall project design and intent., • Prepare clear engineering deliverables including control system design documentation, specifications, instrument lists, and panel design input., • Support proposals and estimates with technical input, hours estimates, and scope definition appropriate to level., • Participate in and contribute to design reviews, quality checks, and lessons learned., • Interface with clients, vendors, contractors, and construction teams professionally and effectively., • Maintain knowledge of applicable codes and standards such as National Electrical Code (NEC), National Fire Protection Association (NFPA), Underwriters Laboratories (UL), and International Society of Automation (ISA)., • Communicate proactively with the project team and Discipline Lead regarding progress, issues, risks, and decisions., • Contribute to a safe working environment and follow EAD safety standards and practices. Required Qualifications • Bachelor's degree in Electrical Engineering, Controls Engineering, or a related technical field; equivalent combination of education, military service, training, and experience may also be considered., • Associate: 3–6 years of controls engineering experience in industrial or manufacturing environments., • Experience with PLC and/or DCS-based control system design, programming, and troubleshooting., • Experience with HMI or SCADA programming and configuration., • Experience performing field work including commissioning, startup, and troubleshooting in active industrial facilities., • Experience working with multi-discipline project teams., • Strong written and verbal communication, including the ability to interact effectively with clients, project teams, and field personnel., • Ability to manage time, prioritize tasks, and deliver results within cost and schedule constraints. Preferred Qualifications • Experience in food and beverage, life sciences, pharmaceutical, parcel, or other industrial manufacturing environments., • Experience with Rockwell / Allen-Bradley platforms including ControlLogix and CompactLogix., • CAP, CCST, PE, or similar relevant credential, or commitment to pursuing one., • Knowledge of NEC, NFPA, UL, and ISA codes and standards., • Experience supporting or leading controls input to proposals and cost estimates., • Professional Engineer (PE), Project Management Professional (PMP), Certified Automation Professional (CAP), or similar relevant credential., • Established industry relationships and a demonstrated ability to build client trust, support repeat business, and contribute to growth are strongly preferred. Behavioral Expectations • Acts with integrity, sound judgment, and professionalism., • Owns commitments, follows through, and closes loops., • Communicates early and clearly when risks, questions, or changes arise., • Works in a way that helps the broader project team succeed., • Brings a practical, solution-oriented mindset to complex field and project challenges., • Seeks to understand field conditions, client needs, and cross-discipline impacts before acting. Working Conditions • Office, plant, or client site environment*, • Ability to perform field and client-site work., • Ability to sit and work at computer for extended periods of time, • Ability to walk up numerous flights of stairs or ladders multiple times a day and/or work in tight spaces in extreme conditions, • May work near moving mechanical parts and equipment*, • Office, commercial and/or industrial setting with the potential of exposure to fumes or airborne particles, toxic or caustic chemicals*, • Ability to lift and/or move up to 50 lbs.*, • Travel required, with periods of significant travel depending on project needs., • Occasional night shift work may be required based on client operations and project schedules, though this is infrequent., • Periodic weekend, holiday or evening work as needed, • Maintain a valid driver's license. *EAD will provide training, administrative/engineering controls, and personal protective equipment as necessary. We strongly believe that diversity of experience, perspectives, and background will lead to a better workplace for our employees and a better product for our customers. EAD is an Equal Opportunity Employer Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice.

Job DescriptionInside Sales Representative — Test & Inspections Location: Memphis, TN (On-Site) Company: State Systems, Inc. Schedule: Monday–Friday Compensation: $65,000–$85,000 (Base + Commission) About State Systems State Systems is a leading provider of life safety, fire protection, and security services across the Mid-South. We take pride in protecting people, property, and businesses through dependable service, technical expertise, and a commitment to excellence. We’re growing — and we’re looking for a detail-oriented, customer-focused Inside Sales Representative to support our Test & Inspections team. About the Role As an Inside Sales Representative – Test & Inspections, you will manage inbound inquiries, support outside sales representatives, and help ensure customers receive accurate quotes, proposals, and service information. You’ll collaborate closely with service, scheduling, and billing teams while maintaining accurate customer records in our CRM. This role is critical in delivering a positive customer experience and supporting continued growth. What You’ll Do Key Responsibilities: Manage inbound sales calls and electronic inquiries through HubSpot and other approved channels. Qualify, document, and process sales opportunities promptly and professionally. Prepare proposals, quotes, and follow-up communications for outside sales representatives. Maintain accurate customer records, opportunities, and communication logs in CRM systems. Coordinate with internal departments to support scheduling and delivery of Test & Inspection services. Provide prompt, courteous, and professional customer support. Track and follow up on open quotes and pending opportunities. Identify opportunities for upselling and cross-selling based on customer needs. Participate in team meetings, training, and process improvement initiatives. What We’re Looking For Minimum 2 years of inside sales or customer service experience (B2B preferred). Experience within service, construction, or life-safety industries is a plus. Proficiency with CRM systems (HubSpot highly preferred). Strong written and verbal communication skills. Excellent organization, accuracy, and time-management skills. Ability to collaborate effectively in a team-oriented environment. Proficiency with Microsoft Outlook, Excel, and Word. Core Competencies Customer Focus Attention to Detail Team Collaboration Professional Communication Adaptability and Initiative Why You’ll Love Working Here At State Systems, our employees are the foundation of our success. We offer a collaborative, professional work environment where your contributions truly matter and your growth is encouraged. Competitive base pay + commission structure Monday–Friday schedule Opportunity to contribute to a mission-driven organization protecting lives and property Join a Leader in Life Safety If you’re ready to grow your career with a company built on integrity, teamwork, and excellence, we’d love to hear from you. Apply today to join State Systems — protecting what matters most. Texting Privacy Policy and Information Message type: Informational — you may receive text messages regarding your application and interview scheduling. Message frequency varies based on the hiring process. Message and data rates may apply. You may opt out at any time by texting STOP. Pre-Employment Screening All employment offers are contingent upon successful completion of a background check and drug screening, in accordance with applicable laws and company policy. Equal Opportunity Employer State Systems is an Equal Opportunity Employer committed to diversity, inclusion, and providing a workplace free from discrimination and harassment. Powered by JazzHR V3YU8zsmXD

Job Description REQUIRED CREDENTIALS: All vessel employees are required to hold a valid Transportation Workers Identification Credential (also known as TWIC®). A valid TWIC is required by the Maritime Transportation Security Act for workers who need access to secure areas of the nation's maritime facilities and vessels. TSA conducts a security threat assessment (background check) to determine a person's eligibility and issues the credential. Information on applying and enrolling for a TWIC card can be found on the Transportation Security Administration's TWIC Website. Per Sub-Chapter M Regulation - Vessel Engineers who do not already hold a Merchant Mariners Credential for Fuel Transfers will be required to obtain an MMC - Tankerman (PIC) Restricted to Fuel Transfers on Towing Vessels. WORK SCHEDULE: The standard work schedule for an engineer is 28 days on the vessel then either 14 or 28 days off. There is normally only one engineer on a boat at a time. Therefore, the daily watch schedule followed by the pilothouse personnel and deck crew does not apply to the engineer. Each engineer will develop a self-directed work schedule which will allow them to be in the machinery spaces on a timely basis and often enough to monitor closely all operating equipment for unusual temperatures, pressures, or other variations from normal operations. When an engineer is off duty, it is their responsibility to get adequate sleep and rest so they are capable of working safely and efficiently when required. An engineer may be requested to return to a boat during their scheduled time off if an emergency arises. PHYSICAL DUTIES OF THE JOB: Engineers must be capable of lifting and moving equipment that may weigh in excess of 100 pounds. It will frequently be necessary to move equipment that is heavy, large, and awkward, sometimes from one level to another. Mechanical lifting devices are provided and must be used as necessary. Assistance must be obtained from other members of the crew when appropriate. The engineer must consider the requirements of a particular job prior to undertaking the task so he or she can be assured that all available equipment or assistance is readily available. All engineers must ascend and descend stairs or ladders, sometimes while transporting tools or objects. They must correctly use portable ladders or stools to allow them to work in the overhead section of machinery spaces and use handrails when appropriate. The engineer must have color vision that allows them to safely work on electrical systems that have color coded wires; make the distinction between warning, alarm, and normal operating lights; discern system components that are identifiable by color code; and observe basic safety precautions that may be related to color identification. An engineer's hearing must be adequate for assuring their own personal safety while working in a machinery space which has high levels of background noise and for detecting changes in operating sounds of machinery. He or she shall be capable of communicating in English with the pilothouse or other personnel via portable or fixed VHF radio as well as intercom systems or voice communication. The engineer must be capable of reading English and to read and understand the various manufacturer's instruction manuals that describe preventative and corrective maintenance procedures for the equipment aboard their boat. The engineer must also be capable of reading and understanding written directives that may affect their job or emergency assignment. The engineer must be capable of performing their assigned emergency duties without undue danger to themselves or the boat. The engineer must know how and when to use the emergency equipment located on the boat and be able to properly wear any safety equipment required by their duties. The physical dexterity required of an engineer demands that he or she be able to manipulate small items in restricted spaces or large objects when using mechanical lifting devices. A broad range of strength and physical dexterity is required. Repairs may require that an engineer reach into difficult to access areas of machinery; work on equipment that has pressurized or hot components; shut off or separate equipment to prevent a safety hazard; trouble shoot equipment that is difficult to access; work in areas that have high noise levels; work below decks in areas that may not be well lighted; and work in restricted spaces. Engineers are responsible for performing any necessary hot work aboard the boat. Hot work includes welding or cutting with an oxygen-acetylene torch (or similar apparatus). The engineer must be certain that any hot work can be performed safely, with no danger for the crew or boat. MISCELLANEOUS DUTIES: The engineer is responsible for safe and efficient operation of all the machinery and associated systems aboard the boat. The daily routine will require that periodic inspections be made of all equipment and machinery spaces. The main engines, generators, steering system, gears, shafts, fuel oil system, fire main, electrical distribution system, emergency equipment, deck winches, lights, alarms, water and air piping systems, fuel tanks, compressors, control systems, marine sanitation system and occasionally barge equipment, will require the attention of the engineer. The engineer shall maintain all the machinery and auxiliary equipment in accordance with the manufacturers recommended standards, as modified by written company policy. They must keep the office advised of problems encountered; parts needed; request assistance when necessary; and assist in major repairs when appropriate. Support from shore-based mechanics will be provided in most repair situations; however, the engineer is responsible for the maintenance and operation of their boat. The engineer is responsible for the transfer of all fuel oil, lube oil, and chemicals aboard the boat. He or she must make every effort to comply with all pollution prevention laws, company policy, and reasonable safety standards. Pollution of the navigable water is against the operating policy of Southern Towing Company. The engineer is responsible for the annual servicing of portable fire extinguishers on the boat and barges. Daily engine room logs shall be maintained accurately and an inventory of all oils and supplies shall be monitored and kept at a level that is adequate to support uninterrupted boat operations. The engineer is responsible to submit monthly engine oil samples to the Port Engineer. The engineer is responsible to test the boat's jigger pumps monthly. The engineer is responsible for the required semi-annual vessel inspection. When a cook is not assigned the engineer will share food preparation duties with other crew members. SECURITY DUTIES: The engineer will perform security duties as directed by the Vessel Security Officer. Duties may include standing security watch, controlling access to the vessel and screening of persons, baggage, supplies, stores and personal effects brought on board. OTHER INFORMATION: Every crew member is required to be aware of and comply with all directives, policies, and procedures contained in the company's Towing Safety Management System (TSMS). Good working relationship with other members of the crew are an important part of the daily routine aboard the boat; every crew member is expected to promote good working relationships.

Job Description Are you an HR Director looking to make an impact in a fast-paced, relationship-driven environment? Join our team and play a key role in supporting growthand helping drive long-term success. The Company: SSI Fire & Safety is a dynamic and rapidly expanding mid-sized holding company specializing in the Fire Life & Safety business. We have aggressive growth targets that we aim to meet through a mix of high organic & inorganic growth. Our organization currently consists of two operating companies – State Systems Inc. and Integrity Fire Safety Services – and we anticipate expanding our portfolio to include additional subsidiaries through strategic acquisitions. Our nationwide workforce of approximately 650 employees delivers critical fire protection and life safety services. To learn more, visit us here. Location of Position: Memphis, TN The Position: The Human Resources Director will be responsible for developing and implementing HR strategies and initiatives with the overall business strategy in mind, through recruiting, onboarding, training, compensation, performance management, employee relations, and compliance. Position Responsibilities: • Develop, improve, and update all company policies & procedures, to include unification of policies across locations., • Ensure company compliance with all applicable federal, state, and local employment laws., • Create and update all company job descriptions and advise and assist managers in job description discussions with employees., • Ensure sign off on policies and training associated with respective policies., • Develop and administer along with HR team the internal Leave of Absence process and toolkit, in compliance with all applicable federal, state, and local law., • Oversee Company payroll and members of the Payroll team., • Manage all Human Resources system related modules, as well as employee & medical files., • Work with a benefits broker to ensure the company's offerings remain fair and competitive., • Evaluate the benefits plan each year and make recommendations for improvements., • Partner with safety and risk team members to ensure work related incidents are handled appropriately., • Implement policies and initiatives to increase employee engagement and retention., • Ongoing management of Performance Management program, ensuring that managers and employees meet deadlines for reviews., • Report to ELT updates on Annual Performance Management Program and implement overall company strategy and goals into program., • Work with senior leadership members and CEO to create company compensation philosophies and provide guidance to managers on annual compensation adjustments., • Manage compensation adjustments, through administering and maintaining unified compensation information., • Identify and manage applicable learning, training, coaching, and development., • Conduct and manage investigations into high-risk situations and employee complaints and claims., • Offer support and guidance to managers on employee relations concerns., • Maintain, improve, and grow internal corrective action process and advise managers on Corrective Action issues, situations, and decisions with employees., • Build, manage, and periodically improve a recruiting framework for the company., • Manage vendor relations for recruiting framework, such as 3rd party recruiters, headhunters, background check company, and drug screening company., • Manage and administer HR functions, alongside HR team, onboarding employees to the company., • Hold Managers accountable and see to the completion of their onboarding responsibilities with new direct reports., • Manage and provide direction to the Safety Coordinator., • Work with the Safety coordinator to identify incident trends and corrective actions. Qualifications: • Bachelor's degree in Human Resources, Business, or a related field., • 7 plus years of strategic HR related experience required, • PHR or SHRM-CP strongly preferred, • Experience working in a multi-location, industrial services organization require, • Proficient in Microsoft Office Suite, • Ability to travel 15% Desired Skills and Competencies: • Strong verbal and written communication, • Detail-oriented, • People judgement, • Leadership, • Strategic Planning, • Decision Making Why Should You Apply? • Benefits (medical, dental, vision), • 401k, • Paid holidays, • PTO Interested? • Apply today and let us know why you would be a great fit for our HR Director position! SSI Fire and Safety is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, national origin, age, disability, genetics, status as a protected veteran, or any other protected status established by federal, state, or local laws. Job Posted by ApplicantPro

Job DescriptionDescription: General Summary The Maintenance Director is responsible for the care, maintenance, safety, and operational readiness of all church and school facilities within Holy Rosary Parish. This position supports the mission of the Diocese of Memphis by ensuring that parish and school properties provide a safe, clean, and welcoming environment for worship, education, and ministry. The Maintenance Director works under the authority of the pastor and in collaboration with the school principal to ensure compliance with diocesan policies, civil regulations, and Safe Environment standards. Essential Duties and ResponsibilitiesFacilities Maintenance • Maintain all parish and school buildings, including the church, classrooms, offices, parish hall, restrooms, storage areas, and auxiliary facilities., • Perform routine repairs and coordinate major repairs related to HVAC, plumbing, electrical systems, carpentry, painting, and general structural needs., • Develop and implement a preventative maintenance schedule., • Maintain records of inspections, repairs, warranties, and service contracts. Grounds & Exterior Care • Oversee landscaping, lawn care, irrigation systems, playground areas, sidewalks, and parking lots., • Ensure safe conditions during inclement weather, including ice mitigation and storm preparation., • Monitor exterior lighting and campus security-related infrastructure. Safety & Compliance • Ensure facilities meet all applicable diocesan policies, fire codes, OSHA standards, and state/local regulations., • Maintain fire alarm systems, extinguishers, emergency lighting, and safety signage., • Assist in implementing diocesan risk management procedures., • Report safety hazards promptly to the pastor and principal. Custodial Supervision • Assist the pastor and principal in the supervision of custodial staff., • Establish and maintain cleaning standards for church and school facilities., • Manage inventory and ordering of custodial and maintenance supplies. Liturgical & School Event Support • Prepare facilities for weekend Masses, Holy Days, sacramental celebrations, Funerals and major liturgical events., • Assist with setup and breakdown for parish and school functions. Vendor & Project Oversight • Obtain bids in accordance with financial policies of the Parish and the Diocese., • Supervise contractors performing maintenance or capital improvements., • Communicate major repair needs to the pastor for approval prior to work being performed. Budget & Stewardship • Assist Pastor in developing and managing the annual maintenance budget., • Practice responsible stewardship of parish and school resources., • Identify long-term capital improvement needs. Requirements: • High school diploma or equivalent required., • Trade certification or technical training preferred., • Minimum of five (5) years of facilities maintenance experience, preferably in a church, school, or institutional environment., • Working knowledge of HVAC, plumbing, electrical systems, and general building maintenance., • Supervisory experience preferred., • Valid driver’s license., • Ability to lift, climb ladders, and perform physical labor as required. Catholic Identity and Conduct Expectations As an employee of the Diocese of Memphis: • The Maintenance Director must agree to abide by the Code of Conduct for Employees and Volunteers (found at www.cdom.org/diocesan-law)., • Employee must demonstrate professionalism, discretion, and respect in interactions with clergy, faculty, staff, students, and parishioners., • Employee must maintain confidentiality in all parish and school matters. Safe Environment Requirements In accordance with the policy of the Diocese of Memphis: • Must successfully complete a criminal background check., • Must complete VIRTUS Safe Environment training prior to beginning employment (or within the timeframe required by the Diocese)., • Must comply with all diocesan Child Protection policies and mandatory reporting laws. Work Environment & Schedule • Position includes both indoor and outdoor work., • Evening and weekend hours may be required to support parish liturgies and school events., • Employee must be available for emergency maintenance situations as needed. Evaluation & Employment Status • Employment is subject to the personnel policies of the Diocese of Memphis., • Performance will be evaluated annually by the pastor, with input from the school principal as appropriate., • Employment is at-will in accordance with Tennessee law.

Job DescriptionDescription: Job Summary The Assistant Chief Engineer is responsible for ensuring proper operations, maintenance, service and repair of all equipment, while supporting the Avion Hospitality goals of guest satisfaction, cost control and profitability. He/she is also responsible for overseeing and participating in the Preventative Maintenance program, ensuring that all rooms and public space meet Avion Hospitality standards. Management-level associates are expected to work as much of each workday as is necessary to complete their job responsibilities; for OEM associates, overtime does apply and is calculated accordingly. Exempt managers must customarily and regular direct the work of at least 3 full-time associates or their equivalents. Primary duties must consist of administrative, executive, or professional tasks more than 50 percent of the time and job duties must also involve the use of discretion and independent judgement more than 50 percent of the time. Education & Experience • High School diploma or equivalent required., • At least 5 years of progressive experience in a hotel or a related field; or a 2-year college degree and 3 or more years of related experience; or a 4-year college degree and at least 2 years of related experience., • Supervisory experience required., • Current Certification as required by Federal, State or Local governing agents pertaining to trade requirements (i.e. HVAC, pool operation, electrical), property specific., • Current certification and licensing to operate and repair the hotels boilers and chillers as required by state, city, and local legislation., • Must have a valid driver's license for the applicable state., • Must be able to convey information and ideas clearly., • Must be able to evaluate and select among alternative courses of action quickly and accurately., • Must work well in stressful, high pressure situations., • Must maintain composure and objectivity under pressure., • Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary., • Must have the ability to assimilate complex information, data, etc. from disparate sources and consider, adjust or modify to meet the constraints of the particular need., • Must be effective at listening to, understanding, clarifying and resolving the concerns and issues raised by coworkers and guests., • Must be able to work with and understand financial information and data, and basic arithmetic functions. Requirements: Job Duties & Functions • Approach all encounters with guests and employees in an attentive, friendly, courteous and service oriented manner., • Maintain regular attendance in compliance with Avion Hospitality standards, as required by scheduling which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which include wearing the proper uniform and name tag when working (per brand standards)., • Comply at all times with Avion Hospitality standards and regulations to encourage safe and efficient hotel operations., • Comply with certification requirements as applicable for position to include: Food Handlers, Alcohol Awareness, CPR and First Aid, • Train and supervise the hourly Engineering staff and coordinate all scheduling., • Review Engineering staff's worked hours for payroll compilation and submit to accounting on a timely basis., • Focus the Engineering Department on their role in contributing to the guest service scores., • Motivate, coach, counsel and discipline all Engineering personnel according to Avion Hospitality standards., • Conduct all 90 day and annual employee performance appraisals according to Avion Hospitality standards., • Prepare and conduct all Engineering interviews and follow hiring procedures according to Avion Hospitality standards., • Attend weekly staff meetings and provide training on a rotational basis using the steps to effective training according to Avion Hospitality standards., • Respond to employee emergency situations using information contained in M.S.D. sheets. Keep M.S.D. sheets current and easily available (with Housekeeping Manager)., • Establish ongoing training for all departments especially Housekeeping, Front Desk and Kitchen to maintain basic upkeep of their departments and equipment., • Adhere to budgeted or re-forecasted expense allotments, using proper procedures for all purchases and keep all necessary items (light bulbs, name tags, etc.) stocked., • Coordinate all inspections of the fire safety systems, including extinguishers, smoke alarms, etc., to maintain proper safety standards., • Manage energy expenses and continually work towards energy conservation., • Participate in required M.O.D. coverage as scheduled., • Ensure that the Preventative Maintenance program is implemented and administered according to Avion Hospitality standards., • Evaluate and spot check the work of all staff and contractors or outside laborers., • Handle guestroom maintenance requests in a timely manner., • Maintain files of and be familiar with all operational manuals and warranty agreements for equipment., • Immediately follow up on any alarms to determine the exact location and cause; determine emergency status and report to Guest Services and/or the General Manager with findings., • Ensure that employees are at all times attentive, friendly, courteous and helpful to guests, all other employees and managers., • Act as emergency contact person., • Attend monthly all-employee meetings and any other functions required by management., • Maintain a professional working relationship and promote open lines of communication with managers, employees and other departments., • Ensure that pool and spa are in compliance with area health codes., • Use proper two-way radio etiquette at all times when communicating with other employees; Ensure the proper use of radio etiquette within department., • Chair Safety Committee, as well as help coordinate fire drills and the training of all employees on safety procedures., • Establish and maintain key control system., • Be familiar with the organization of Avion Hospitality Hotels and know the function of each department., • Conduct daily property tour of the hotel and exterior perimeter for debris and trash removal; Check the lighting and irrigation periodically., • Handle items for “Lost and Found” according to the standard., • Perform any other duties as requested by the General Manager.

Job Description Job Description: State Systems, Inc. of Memphis, TN is seeking a Billing Specialist - Low Voltage/Sprinkler Are you able to multitask and prioritize your responsibilities? Do you have excellent organizational skills? If so, we want you to join our team! The successful candidate will be responsible for Construction & Service billing for multi-locations, A detail-oriented billing professional responsible for accurate invoice processing, payment tracking, and account reconciliation. Ensures timely billing cycles, minimizes discrepancies, and maintains compliance with financial procedures Department: Memphis, Tennessee Office (on-site) Summary: • Interact with customers, vendors and co-workers in a professional manner., • Must be proficient with Microsoft Office (Word, Excel and Outlook)., • Must be able to work sitting at a desk for the standard eight-hour workday., • Work within a team to collaborate, problem solve, and learn in a fast-paced environment., • Work with the Manager, Scheduling Coordinator, and other office staff to ensure a seamless process from scheduling to billing., • Assists with special projects, as necessary., • Must be a professional team player., • Generate and process invoices for clients/customers, • Verify billing data for accuracy and completeness, • Research and resolve billing discrepancies and disputes, • Communicate with customers and internal teams regarding billing issues, • Ensure compliance with company policies and billing procedures Schedule: • 8-hour shift, • Monday to Friday, • Pay: $20-$25 DOETo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Preferred Education and/or Experience: Associate degree (A.A.) or equivalent, from two-year college or technical school; or minimum of two years’ related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: To perform this job successfully, an individual should possess strong computer skills. Proficient in Microsoft Excel, Word and other MS Office products. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to sit. The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and ability to adjust focus. Company Overview: State Systems is a privately owned total protection company based in Memphis, Tenn., which seeks to embody its mission of protecting life and property into every client and product every day. Long-known in the Mid-South for its family-owned leadership and life safety systems, the company’s longest-standing and best-known services – such as fire protection equipment, training and cleaning services – have been enhanced by new technology services such as network integration, structured cabling systems and wireless support. By operating with the utmost integrity, offering superior products and excellent customer service, State Systems has positioned itself as a leader in numerous industries providing a wide range of products and services through four divisions: Fire Protection, Cleaning Services, Technology and Low Voltage. Each division features highly trained and industry-certified professional technicians to install and maintain your system to perform as specified. With years of proven experience in designing and fitting clients with engineered systems, State Systems is committed to finding the right solution for you. Whether you need a stand-alone product or a custom-fitted total integration system, you can trust State Systems to provide top-of-the-line products backed by a highly knowledgeable and dedicated staff. Benefits: • 401(k) / 401(k) matching, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Voluntary insurance, • Company phone or allowance, • Logo attire, • Employee assistance program, • Flexible spending account, • Health savings account, • Opportunities for advancement, • Paid time off, • Holiday pay, • Professional development assistance, • Referral program, • Retirement plan, • Payment frequency: biweekly, • Accident & critical illness benefits, • Hospital indemnity benefits, • Pet insurance, • Wellness benefits State Systems is committed to helping you achieve your best health & rewards you for taking part in a wellness program. An Equal Opportunity Employer: EEO/Drug Free/M/F/Disability/Veterans Ability to Commute/Relocate: • Reliably commute or planning to relocate before starting work (Required), • Work Location: In personExperience:, • Microsoft Excel: 2 years (Required), • Microsoft Word: 2 years (Required), • Microsoft Outlook: 2 years (Required), • High school or equivalent (Required) Powered by JazzHR 54XIDfTr8X

Job DescriptionDescription: PURPOSE: Under direct supervision, this position is responsible for accurately performing the duties and responsibilities described herein. Additionally, this position can be tasked with operating company equipment and vehicles and while operating said equipment or vehicles the employee will use the utmost care and discretion by adhering to all Occupational Health and Safety regulations, all federal/state transportation laws and any related company policies or procedures. Job Summary Candidate must be able and willing to: • Barcode and process new boxes, • Pull access list., • Refile Boxes/Files, • Barcode and process boxes scheduled for destruction., • Perform responsibilities related to bay consolidations., • Demonstrate proficiency in operating a picker forklift or other company equipment., • Prior to signing out equipment performs operations and safety check, including battery, brakes, lift controls, and fire extinguisher., • Proceeds safely to assigned area to pull, load and move boxes., • Warehouse maintenance, • Make pickups and deliveries., • Vehicle maintenance, • Other duties as assigned., • At the end of each day, return equipment to the correct charging station, and prepares equipment for daily (overnight) charge. Unique Challenges • Strong commitment to accuracy and quality, • Be self-motivated and work independently., • Motivated by accountability to productivity, accuracy, and timeliness measurements., • Always maintain strict company confidentiality and security.Requirements: Qualifications • Valid driver’s license with clean MVR and clean background check, • High School Diploma minimum, • Problem solving skills to solve process problems., • Physically able to perform labor intensive tasks every day (Continuous lifting of 40-50 lb. boxes), • Good eye/hand coordination and good motor skills, • Work well under time constraints and productivity requirements., • Willing to follow established procedures yet be creative to offer suggestions for improvements., • Willing to perform tasks at significant heights (12-14 ft.), • Ability to use handheld computer, electric pickers, drive van and bob truck., • Flexibility to accept different work hours and assignments., • Willingness to work overtime., • Strong customer service background, • Detail oriented work style, • Must be dependable, reliable, and mature enough to handle equipment safely and sensibly., • Able to pass a DOT Physical, • Able to driver a van or a 16ft Box Truck VRC is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, disability, medical condition, genetic information, military and veteran status, marital status, age, or any other basis protected by applicable federal, state, or local laws. We also consider qualified applicants with arrest and conviction records consistent with the Fair Chance Ordinance.

Job DescriptionDescription: PURPOSE: Under direct supervision, this position is responsible for accurately performing the duties and responsibilities described herein. Additionally, this position can be tasked with operating company equipment and vehicles and while operating said equipment or vehicles the employee will use the utmost care and discretion by adhering to all Occupational Health and Safety regulations, all federal/state transportation laws and any related company policies or procedures. Job Summary Candidate must be able and willing to: • Barcode and process new boxes, • Experience operating the cherry picker, • Pull access list., • Refile Boxes/Files, • Barcode and process boxes scheduled for destruction., • Perform responsibilities related to bay consolidations., • Demonstrate proficiency in operating a picker forklift or other company equipment., • Prior to signing out equipment performs operations and safety check, including battery, brakes, lift controls, and fire extinguisher., • Proceeds safely to assigned area to pull, load and move boxes., • Warehouse maintenance, • Make pickups and deliveries., • Vehicle maintenance, • Other duties as assigned., • At the end of each day, return equipment to the correct charging station, and prepares equipment for daily (overnight) charge. Unique Challenges • Strong commitment to accuracy and quality, • Be self-motivated and work independently., • Motivated by accountability to productivity, accuracy, and timeliness measurements., • Always maintain strict company confidentiality and security.Requirements: Qualifications • Valid driver’s license with clean MVR and clean background check, • High School Diploma minimum, • Problem solving skills to solve process problems., • Physically able to perform labor intensive tasks every day (Continuous lifting of 40-50 lb. boxes), • Good eye/hand coordination and good motor skills, • Work well under time constraints and productivity requirements., • Willing to follow established procedures yet be creative to offer suggestions for improvements., • Willing to perform tasks at significant heights (12-14 ft.), • Ability to use handheld computer, electric pickers, drive van and bob truck., • Flexibility to accept different work hours and assignments., • Willingness to work overtime., • Strong customer service background, • Detail oriented work style, • Must be dependable, reliable, and mature enough to handle equipment safely and sensibly. VRC is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, disability, medical condition, genetic information, military and veteran status, marital status, age, or any other basis protected by applicable federal, state, or local laws. We also consider qualified applicants with arrest and conviction records consistent with the Fair Chance Ordinance.

Job Description Firefighters First Federal Credit Union has proudly been serving the firefighter community since 1935. We have built trusting relationships within the fire family as the nation’s largest exclusive firefighter credit union . Our commitment to providing our members with exceptional financial products and services, along with our legendary service, has allowed us to grow our membership nationally. Join a team that values its employees, invests in professional growth, and makes an impact in the firefighter community. Are you a dynamic and enthusiastic leader with a passion for serving the community? Currently, we have an immediate opening in our Memphis, TN branch for a Branch Manager (Regional Office Manager) to join our team! The Manager, Regional Office is responsible for the branch operations of the regional office. They are responsible for leading and developing their team, providing after-hour member support, attaining production goals, and expanding membership while delivering legendary member experience. The Regional Office Manager is also responsible for promoting membership expansion by networking with local fire stations, unions, professional firefighter organizations, and attending events. Primary Responsibilities: • Managing all regional office operations. This includes performing routine audits as necessary and fulfilling fiduciary responsibilities., • Ensuring members’ needs are met through a consultative approach, going above & beyond whenever possible through multiple channels, from traditional phone interactions to in-person conversations to Improve the Financial Lives of Our Fire Family, and ensuring every member, every time, is receiving legendary service across all interactions., • Promoting membership expansion by networking with local fire stations, unions, professional firefighter organizations, and attending events where brand exposure is optimal. This includes working with the business development team when needed to support this effort., • Handling escalations which include researching and responding to member inquiries in a timely manner. This includes working with other departments to coordinate responses, research, resolutions, or carry out other required duties to support our membership., • Effectively managing lending and deposit pipelines., • Forecasting and scheduling teams to provide members with adequate coverage each day. Leadership Responsibilities: • Regularly meeting with each team member, managers and FSCs, to coach and mentor to ensure alignment around FFCU’s mission, vision, and values., • Providing team members with training, tools, and resources to successfully perform their jobs., • Holding teams accountable for meeting all service level agreements, ensuring the team’s work is accurate/efficient, and providing coaching, feedback, or training as needed., • Providing and ensuring development opportunities are available for team members as part of their overall career path with the Credit Union., • Leading change by identifying opportunities that consistently raise the bar and improve service levels., • Assisting the Credit Union with executing the business plan of the organization. Basic Qualifications: • Education: Bachelor’s degree., • Minimum of 3 years’ experience as a branch manager or a financial services branch representative., • Experience supervising or managing employees., • Experience with sales and operations at a financial institution., • All candidates must be bondable and maintain bondable status throughout employment in accordance with credit union regulatory requirements. Benefits: We offer exceptional benefits to our employees, including: • Competitive salary with a pay for performance bonus, • Fully paid Medical, Dental, and Vision benefits package for employees., • Fully paid Life insurance, AD&D, short and long-term disability coverage, • 401k plan with a 3% safe harbor from the credit union and a matching program of up to 4%, • Education reimbursement of up to $5,250 annually, along with a 0% education loan assistance program, • Pet Insurance, • 4 weeks of PTO annually including 2 ½ days of float time., • 9 paid holidays plus 2 half days Join our team and make a meaningful impact on the lives of firefighters and their families. We value your skills, expertise, and commitment to serving the community. Apply today to become a part of our mission to strengthen our Fire Family and create a brighter financial future for our members. Firefighters First Federal Credit Union is an Equal Employment Opportunity employer. We do not discriminate based upon race, color, religion, age, gender, marital status, physical or mental disability, medical condition, pregnancy, sexual orientation, gender identity or expression, national origin, veteran status, genetic information, or any other status protected under federal, state, or local law. Firefighters First Federal Credit Union is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact Human Resources at careers@firefirstcu.org.

Job DescriptionState Systems, Inc. We are growing and seeking highly motivated individuals to join our team! Founded in Memphis, Tennessee, we have grown our company to serve businesses and organizations in Tennessee, Mississippi, Arkansas, and Alabama. Job Title: AR Specialist Department: Shared Services Pay Range: $20-$25 DOE Summary: The AR Specialist supports daily receivables operations, including payment posting, account reconciliation, collections follow-up, discrepancy resolution, and customer account maintenance to help maintain accurate records and improve cash flow. Essential Duties and Responsibilities: • Daily - post deposits that are received through the lockbox at the bank, ACH and branch receipts., • Resolve discrepancies in payments and/or receipts., • Track deposits and report variances to staff accountant., • Contact selected group of customers with delinquent open invoices, work with customers as needed to resolve discrepancies., • Answers accounts receivable phone inquiries and follows up., • Work closely with divisions as needed to resolve discrepancies., • Assist in the generation of customer statements to customers based on criteria established by manager., • Obtain and mail invoice copies for customers, as requested., • Research and process charge backs, returns, and bad checks., • Calls and/or mails correspondence to customers as necessary to update accounts., • Assists with related special projects, as required., • The typical work schedule for this position is Monday - Friday from 8:00am to 5:00pm.Education and/or Experience:, • High school diploma or equivalent required; related degree preferred., • 1-3 years of experience in accounts receivable, collections, or related field, • Strong understanding of accounting principles and AR processes, • Proficiency in accounting software and Microsoft Excel, • Excellent communication and customer service skills, • Strong attention to detail and organizational skills, • Ability to handle multiple tasks and meet deadlinesKey Skills & Competencies:, • Accuracy, organization, and attention to detail, • Problem-solving, prioritization, and time management, • Clear communication and strong customer service, • Ability to work independently and collaborate across departments Powered by JazzHR F2dTaTQ8CV

Job Description Build What Matters. Build Your Future. Catamount builds the spaces communities depend on every day. From distribution centers that keep goods moving and medical facilities that provide critical care, to housing, restaurants, and fire stations serving local neighborhoods, our work supports real life. As a best-in-class, 100% employee-owned general contractor with a national reach, we complete projects across diverse markets and regions. This diversity empowers us, keeps our teams moving forward, and creates long-term opportunities for the people shaping our company. Why choose Catamount? We're financially stable, growing, and built for the long haul. Our extensive national backlog and diverse project types provide stability, momentum, and opportunities. At Catamount, careers advance. Employee-owners can grow, move between project types and markets, and build long-term careers without starting over. Teams are carefully staffed, work-life balance is prioritized, and our people are seen as long-term assets. Diverse work. Real stability. Shared success. Position Overview: The Assistant Superintendent plays a crucial role in supporting both the Superintendent and Project Manager in the successful execution of construction projects. This position oversees subcontractor coordination, preparation of comprehensive project reports, facilitating meetings, organizing workspaces and trailers, and executing various tasks as assigned by project leadership Role & Responsibilities: • Effectively prepare a complete Daily Construction Report that is well-written, accurately records weather conditions, delineates specific activities and manpower, and includes project photos taken routinely., • Maintain individual cost tracking logs on site and effectively manage cost expenditures., • Interact with subcontractors in a professional manner by communicating expectations clearly and providing guidance as needed. Address any issues or concerns promptly and professionally to ensure smooth operations., • Proactively schedule work to expedite the project and address any issues with subcontractors early on by planning and organizing tasks in advance and promptly resolving any problems with subcontractors to avoid delays., • Prepare daily and weekly safety reports to ensure all safety protocols are being followed and documented. Attend mandatory monthly safety meetings to stay updated on safety regulations and practices., • Prepares Daily/Weekly/Event SWMP Reports; and ensure that BMP's are in place., • Read, research, coordinate, and understand project documents at least 2-3 weeks prior to the start of tasks to ensure thorough preparation., • Review submittals before the installation of work to verify compliance with project requirements., • Prepare, track, and maintain the project turnover matrix, ensuring it includes all jurisdictional sign-offs and owner requirements., • Develop the project punch-list in association with the Project Manager (PM) to ensure all tasks are identified and addressed. Take responsibility for completing the punch-list within two weeks of its issuance., • Taking part in various aspects of the job, gaining exposure to different tasks and processes, even if not yet fully responsible for them., • Proactively take on various tasks to reduce the workload of superintendents, ensuring they can focus on higher-level responsibilities. Skills & Qualifications: • People and project management skills and abilities, • A safety champion who leads by example, • Refined organizational skills, and the ability to prioritize tasks for self, team, and projects, • Strong communication skills including listening, presenting, interpersonal and written, • Minimum of 2 years of experience training with a general contractor, or equivalent combination of education and experience preferred, • High School Diploma or general education degree (G.E.D.), or preferably a Bachelor's degree from an accredited college or university, • Knowledge of Microsoft Office (Word, Excel, MS Project) and experience with (or ability to learn) Procore Compensation: In addition to offering a competitive base salary, Catamount employees are eligible for additional incentives for merit/performance, project incentives, new hire referrals, and business development commissions. Why You'll Love Working Here • A culture that develops leaders. Grow alongside experienced mentors in an environment rooted in accountability, trust, and shared success., • Work that builds careers. With projects spanning multiple markets, you'll have opportunities to grow, specialize, and evolve as your career goals take shape., • 100% employee-owned. Our Employee Stock Ownership Plan (ESOP) aligns our employee-owners with our mission. When Catamount succeeds, employee-owners share that success., • Benefits that support everyday life. Our comprehensive benefits package includes medical, dental, and vision insurance; life insurance; short- and long-term disability coverage; an Employee Assistance Program (EAP); a 401(k); an ESOP; a generous VacationFlex program; paid sick time; and optional programs such as pet insurance and AFLAC accident, critical illness, and hospital policies. Please refer to the Summary Plan Descriptions for eligibility requirements and additional details. Catamount Constructors Incorporated does not accept unsolicited resumes from agencies or recruiting firms. Any resume submitted to any employee of Catamount without a prior executed agreement will be considered unsolicited and the property of Catamount Constructors Incorporated. Recruiting agencies - thank you for not calling or emailing. Our Commitment to an Inclusive Workplace: Catamount Constructors, Inc. is proud to be an equal opportunity employer and is committed to providing a workplace free from harassment and discrimination. Employment decisions are based on business needs, job requirements and individual qualifications, and we do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity or expression, age, marital status, veteran status, disability status, pregnancy, parental status, genetic information, political affiliation, or any other status protected by the laws or regulations in the locations where we operate. Accommodations are available for applicants with disabilities.

Job DescriptionABOUT xAI xAI's mission is to create AI systems that can accurately understand the universe and aid humanity in its pursuit of knowledge. Our team is small, highly motivated, and focused on engineering excellence. This organization is for individuals who appreciate challenging themselves and thrive on curiosity. We operate with a flat organizational structure. All employees are expected to be hands-on and to contribute directly to the company's mission. Leadership is given to those who show initiative and consistently deliver excellence. Work ethic and strong prioritization skills are important. All employees are expected to have strong communication skills. They should be able to concisely and accurately share knowledge with their teammates. ABOUT THE ROLE: You will oversee mechanical contractors and crews building the advanced mechanical infrastructure for xAI's Data Centers — including large-scale HVAC and cooling systems, chilled water plants, condenser water systems, process piping, pumps, CRAC/CRAH units, cooling towers, and fire protection systems. If you thrive on hands-on leadership, complex industrial mechanical construction, and contributing to high-impact AI infrastructure, join us to help deliver one of the most advanced and efficient data centers in the world. This is a full-time, onsite role based in Memphis, Tennessee, with relocation required depending on additional construction locations within the US. RESPONSIBILITIES: • Oversee and coordinate mechanical installations including chilled water piping, condenser systems, HVAC equipment, cooling towers, pumps, heat exchangers, ductwork, CRAC/CRAH units, and fire suppression systems for xAI Data Centers., • Manage and schedule mechanical contractors, subcontractors, and on-site crews to deliver project milestones on time and to xAI's exacting quality and reliability standards., • Ensure all contractors adhere to mechanical scope, delivering high-integrity cooling and process systems critical to data center uptime, efficiency, and thermal management., • Monitor daily progress of mechanical construction, maintaining detailed logs, red-line drawings, and as-built documentation for all mechanical infrastructure., • Develop and enforce aggressive construction schedules while keeping the project on time and within budget., • Champion and enforce xAI's safety program, building a zero-incident culture across all teams working around heavy mechanical equipment, pressurized systems, and elevated work., • Supervise foremen and mechanical crews, fostering teamwork and accountability in a high-stakes mission-critical environment., • Proactively resolve on-site challenges — material delays, technical conflicts, sequencing issues, and coordination with electrical/civil trades — with a strong focus on mechanical system reliability and code compliance., • Conduct regular site inspections to verify compliance with local regulations, mechanical codes, safety protocols, and xAI's stringent quality standards., • Prepare and present clear progress reports, mechanical construction metrics, and risk updates to senior leadership.BASIC QUALIFICATIONS:, • 3+ years managing mechanical construction teams with strong emphasis on large-scale industrial or mission-critical mechanical projects., • 3+ years of direct hands-on experience in mechanical installations including process piping, HVAC systems, chilled water plants, pumps, and cooling infrastructure — ideally on data centers, industrial processes, or heavy mechanical projects., • High school diploma or equivalency certificate.PREFERRED SKILLS AND EXPERIENCE:, • Postsecondary diploma or degree in construction management, mechanical engineering, or related field., • Proven track record supervising mechanical construction for data centers, hyperscale facilities, or similar mission-critical environments., • Familiarity with Memphis-area building codes, mechanical regulations (IMC, ASME, NFPA), and industrial permitting., • Experience with construction management software (Procore, AutoCAD, Bluebeam, MS Project, etc.) on complex infrastructure projects., • Deep knowledge of mechanical construction critical paths, sequencing, and coordination with electrical/civil trades through commissioning and startup., • Strong understanding of data center mechanical specifications, redundancy requirements (N+1, 2N), energy efficiency, and cooling systems designed for 24/7 operation., • Demonstrated ability to lead diverse crews under tight deadlines while maintaining collaboration and safety., • Expert-level commitment to mechanical safety (pressure systems, LOTO, confined space) and history of building strong safety cultures on regulated sites., • Excellent problem-solving and conflict-resolution skills for technically complex mechanical scenarios., • Proficiency with Microsoft Office suite (Excel, PowerPoint, Word, Teams, Project) for reporting and scheduling.ADDITIONAL REQUIREMENTS, • Ability to relocate within the US depending on construction location(s), • Subject to pre-employment drug screening and random drug and alcohol testing., • Subject to pre-employment and annual post-employment background checks., • Comfortable working in industrial environments with exposure to noise, heavy equipment, excavations, and mechanical systems., • Available for evenings and weekends as site operational needs dictate., • Ability to lift 25+ lbs and perform physically demanding tasks in outdoor/tight conditions. If you are a hands-on mechanical construction leader who excels in high-stakes, mission-critical environments and is ready to drive the delivery of groundbreaking AI infrastructure, we encourage you to apply. xAI is an equal opportunity employer. For details on data processing, view our Recruitment Privacy Notice.

Job DescriptionABOUT xAI xAI's mission is to create AI systems that can accurately understand the universe and aid humanity in its pursuit of knowledge. Our team is small, highly motivated, and focused on engineering excellence. This organization is for individuals who appreciate challenging themselves and thrive on curiosity. We operate with a flat organizational structure. All employees are expected to be hands-on and to contribute directly to the company's mission. Leadership is given to those who show initiative and consistently deliver excellence. Work ethic and strong prioritization skills are important. All employees are expected to have strong communication skills. They should be able to concisely and accurately share knowledge with their teammates. ABOUT THE ROLE You will oversee mechanical contractors and crews building the advanced mechanical infrastructure for xAI's Memphis Data Center — including large-scale HVAC and cooling systems, chilled water plants, condenser water systems, process piping, pumps, CRAC/CRAH units, cooling towers, and fire protection systems. If you thrive on hands-on leadership, complex industrial mechanical construction, and contributing to high-impact AI infrastructure, join us to help deliver one of the most advanced and efficient data centers in the world. This is a full-time, onsite role based in Memphis, Tennessee, with relocation required depending on additional construction locations within the US. RESPONSIBILITIES • Oversee and coordinate mechanical installations during night shift hours, including chilled water piping, condenser systems, HVAC equipment, cooling towers, pumps, heat exchangers, ductwork, CRAC/CRAH units, and fire suppression systems for xAI Data Centers., • Manage and schedule mechanical contractors, subcontractors, and on-site crews to deliver project milestones on time and to xAI's exacting quality and reliability standards., • Ensure all contractors adhere to mechanical scope, delivering high-integrity cooling and process systems critical to data center uptime, efficiency, and thermal management., • Monitor daily night-shift progress of mechanical construction, maintaining detailed logs, red-line drawings, and as-built documentation for all mechanical infrastructure., • Develop and enforce aggressive construction schedules while keeping the project on time and within budget., • Champion and enforce xAI's safety program, building a zero-incident culture across all teams working around heavy mechanical equipment, pressurized systems, and elevated work during night operations., • Lead, train, and supervise foremen and mechanical crews, fostering teamwork and accountability in a high-stakes mission-critical environment., • Proactively resolve on-site challenges — material delays, technical conflicts, sequencing issues, and coordination with electrical/civil trades — with a strong focus on mechanical system reliability and code compliance., • Conduct regular night-shift site inspections to verify compliance with local regulations, mechanical codes, safety protocols, and xAI's stringent quality standards., • Prepare and present clear progress reports, mechanical construction metrics, and risk updates to senior leadership.BASIC QUALIFICATIONS, • 3+ years managing mechanical construction teams with strong emphasis on large-scale industrial or mission-critical mechanical projects., • 3+ years of direct hands-on experience in mechanical installations including process piping, HVAC systems, chilled water plants, pumps, and cooling infrastructure — ideally on data centers, industrial processes, or heavy mechanical projects., • High school diploma or equivalency certificate.PREFERRED SKILLS AND EXPERIENCE, • Postsecondary diploma or degree in construction management, mechanical engineering, or related field., • Proven track record supervising mechanical construction for data centers, hyperscale facilities, or similar mission-critical environments., • Familiarity with Memphis-area building codes, mechanical regulations (IMC, ASME, NFPA), and industrial permitting., • Experience with construction management software (Procore, AutoCAD, Bluebeam, MS Project, etc.) on complex infrastructure projects., • Deep knowledge of mechanical construction critical paths, sequencing, and coordination with electrical/civil trades through commissioning and startup., • Strong understanding of data center mechanical specifications, redundancy requirements (N+1, 2N), energy efficiency, and cooling systems designed for 24/7 operation., • Demonstrated ability to lead diverse crews under tight deadlines while maintaining collaboration and safety., • Expert-level commitment to mechanical safety (pressure systems, LOTO, confined space) and history of building strong safety cultures on regulated sites., • Excellent problem-solving and conflict-resolution skills for technically complex mechanical scenarios., • Proficiency with Microsoft Office suite (Excel, PowerPoint, Word, Teams, Project) for reporting and scheduling.ADDITIONAL REQUIREMENTS, • Subject to pre-employment drug screening and random drug and alcohol testing., • Subject to pre-employment and annual post-employment background checks., • Comfortable working in industrial environments with exposure to noise, heavy equipment, excavations, and mechanical systems., • Available to work night shift as the primary schedule, with flexibility for evenings and weekends as site operational needs dictate., • Ability to lift 25+ lbs and perform physically demanding tasks in outdoor/tight conditions. If you are a hands-on mechanical construction leader who excels in high-stakes, mission-critical environments and is ready to own the night shift on groundbreaking AI infrastructure, we encourage you to apply. xAI is an equal opportunity employer. For details on data processing, view our Recruitment Privacy Notice.

Job Description⁠⁠⁠⁠⁠⁠⁠HPC Industrial, powered by Clean Harbors, is looking for a Hydro blaster/ Field Technician to join their safety conscious team! This Technician will be responsible for the safe & proper execution of HPC-Industrial jobs across all services lines. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? • Health and Safety is our #1 priority and we live it 3-6-5!, • Competitive wages., • Comprehensive health benefits coverage after 30 days of full-time employment., • Group 401K with company matching component., • Own part of Clean Harbors with our Employee Stock Purchase Plan (U.S. Only)., • Generous paid time off, company paid training and tuition reimbursement., • Positive and safe work environments., • Opportunities for growth and development for all the stages of your career. Key Responsibilities: • Act as safety representative responsible for safety policies & procedures of both the company & the customer, including hands-on information regarding operations, safety, equipment, emergency response & administrative functions., • Hands-on operation, when required, of manual and automated hydro-blasting equipment., • Operation of special equipment, such as ultra-high-pressure pumps., • Operate equipment by energizing the pumping equipment and/or any specialized hydro-blasting and/or chemical cleaning equipment, vacuum trucks & cutting equipment being used on the job., • May be required to examine surface cleaned to ensure conformance to company & customer specifications., • Perform routine maintenance on company equipment being used on the job., • In the case of personnel in a supervisor capacity: Interface with customer representatives regarding job setup and scope, ensure performance & customer requirements are met or exceeded and company policies & procedures are implemented at the job site. Report to the branch manager or the designee and implement procedures to obtain results specified by the branch manager Physical demands: • See, read, distinguish, & understand signs in the work area., • Hear & distinguish emergency signals while on duty., • Execute a 180-degree rotary motion of the cervical spine to allow complete movement of the head & neck., • Must be able to extend arms above head., • Frequently bend at waist stoop, squat, kneel, reach & crawl., • Tolerate being wet from head to toe for an unlimited amount of time., • Climb ladders & work from scaffolding & stationary platforms up to heights of 200 ft., • Tolerate & function in confined spaces of a minimum of 5 ft inside diameter., • Hold the back thrust of 50lbs on a straight 66” pipe for a minimum of 1 hour., • Must be capable of working up to 16 hours per shift., • Must be physically capable of using both negative pressure and air supplied respirators., • Must be able to wear protective clothing and/or equipment. This includes, but is not limited to, Nomex coveralls, a back belt, slickers, rubber boots, a fresh air breathing mask, an escape pack, and a hard hat., • Work under extreme climate conditions (excessive high heat index of 95 degree Fahrenheit, 98% humidity; and sub-zero weather conditions) relative to geographical location., • Exposure to dust (chemical & environmental), fumes, (chemical & fluids). Exhaust & highly pressurized fluids. (A respirator will be provided when required.), • Noise levels exceed 85 dBA (hearing protection is provided and required.), • Lift & maintain a minimum of 40lbs. What does it take to work for HPC-Industrial?, • Specific vocational preparation including classroom safety training, on-the-job training & essential experience gained on other jobs., • Language proficiency: understands English at a level to comprehend safety training & respond to instructions in emergency situations., • Valid driver’s license and other requirements of company’s driving policy required when driving company vehicle or using personal vehicle on company business., • Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers., • Provide Federal Transportation Workers Identification Credential (TWIC). About HPC-Industrial: HPC-Industrial, powered by Clean Harbors, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at https://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ect@cleanharbors.com or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *HPC

Job DescriptionDescription: The Food and Beverage Supervisor is responsible for assisting the Food and Beverage Manager in ensuring first quality Food and Beverage service, while maintaining adherence to budgeted payroll and overhead costs. He/she is also responsible for continually working toward improving Food and Beverage sales revenues beyond budget. Management-level associates are expected to work as much of each workday as is necessary to complete their job responsibilities; for OEM or hourly associates, overtime does apply and is calculated accordingly. Job Duties and Responsibilities • Maintain regular attendance in compliance with Avion Hospitality standards, as required by scheduling which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which include wearing the proper uniform and name tag when working., • Comply at all times with Avion Hospitality standards and regulations to encourage safe and efficient hotel operations., • Be familiar with the organization of Avion Hospitality and know the function of each department., • Assist Food and Beverage Manager in maintaining food and beverage costs., • Maintain close communication links with all employees, seeking input regarding food and beverage issues and acting as a motivating influence., • Monitor and follow up on all servers' cash overages and shortages., • Maintain service standards throughout the department by using such quality control instruments as Standard of the Week and coaching sessions., • Immediately follow up on accidents, problems or guest complaints in the Food and Beverage Department., • Be familiar with and able to react to emergency situations by knowing locations of fire and extinguishers and exits., • Maintain proper consistent disciplinary actions for all Food and Beverage employees., • Be familiar with P.O.S. system used in the hotel., • Ensure employees are at all times, attentive, friendly, helpful and courteous to guests, employees and other managers., • Assist the Food and Beverage Manager in wage progress and productivity reports for Food and Beverage Department., • Assist in preparation of staff schedules according to business forecast, maintaining adherence to wage control, productivity standards and guest service scores., • Assist in monthly food and beverage inventories and reconciliations., • Ensure all side work duties are completed by servers., • Assist Food and Beverage Manager in developing promotional ideas., • Assist Food and Beverage Manager in planning and organizing monthly department meetings., • Initiate and promote sales efforts for all service personnel., • Assist the Food and Beverage Manager in preparing for and conducting employee performance appraisals., • Assist the Food and Beverage Manager and Food Production Manager in maintaining and improving the quality and presentation of all food products., • Attend weekly Food and Beverage meeting, daily pre-meal meetings, and other meetings as required by management., • Perform any other duties as requested by management. Requirements: Education and Experience • At least 1 year of progressive experience in a hotel or a related field required. High School diploma or equivalent required., • College course work in related field helpful., • Previous supervisory responsibility preferred., • Must be able to convey information and ideas clearly., • Must be able to evaluate and select among alternative courses of action quickly and accurately., • Must be able to show initiative in job performance, including anticipating what needs to be done before it becomes a necessity., • Must work well in stressful, high pressure situations., • Must maintain composure and objectivity under pressure., • Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary., • Must have the ability to assimilate complex information, data, etc., from disparate sources and consider, adjust or modify to meet the constraints of the particular need., • Must be effective at listening to, understanding, and clarifying the concerns and issues raised by co-workers and guests., • Must be able to work with and understand financial information and data, and basic arithmetic functions.

Job DescriptionSummary:Our mitigation team is usually the first response team on urgent and short notice. This role specializes in restoring residential and commercial properties after emergency water damage, flood damage, mold damage and fire/smoke damage situations. Responsibilities: • Respond promptly to emergencies., • Take moisture readings and pictures at job site. Assessing damages and stopping the continuation of damage. Accurately reporting findings in job management software., • Set up, monitor, and move equipment needed for drying premises, dehumidification, and mold remediation., • Removal of water and mold contaminated materials., • Complete demolition as it relates to water mitigation including, floor removal, moving furniture, etc., • Ensure that safety protocols and industry standards are always followed., • Available for On-Call after hours, holidays, weekend rotating schedules. Qualifications: • High School diploma or equivalent., • IICRC WTR or ASD Certification preferred, but not required., • Prior experience in water mitigation and mold remediation., • Valid Driver’s License., • Available for On-Call after hours, holidays, weekend rotating schedules. Benefits: • 401k company match., • 6 paid holidays., • Medical/ Dental/ Vision/ Supplemental Insurance., • Company will pay for training and certification., • PTO.

Job DescriptionAssistant Manager Job Summary The Assistant Manager delivers exceptional results through others. They assist the General Manager in providing an engaging environment for restaurant teams and guests while focusing on delivering operational excellence. Chicken Salad Chick Assistant Managers embrace and help lead the Chicken Salad Chick Culture, manage administration and maintain the facility. Essential Responsibilities • Serve as a Brand Ambassador for Chicken Salad Chick., • Understand & adhere to all policies, procedures, standards, specifications, guidelines and training programs., • Ensure that all Guests feel welcome and are given responsive, friendly and courteous service., • Ensure that all products are consistently prepared and served according to CSC standards., • Achieve identified objectives for sales, service, quality, appearance of facility and sanitation and cleanliness through training of employees and by creating a positive, productive working environment., • Control cash and other receipts by adhering to cash handling and reconciliation procedures., • Operationally fill in as needed to ensure guest service standards and efficient operations., • Continually strive to develop staff in all areas of managerial and professional development., • Prepare all required paperwork, forms and reports in an organized and timely manner., • Ensure that all products are received in correct unit count and condition and deliveries are performed in accordance with the restaurant’s receiving policies and procedures., • Sets clear expectations on shift and creates a working environment and serves as a role model to create memorable guest experiences., • Takes actions to solve and celebrates guest feedback., • Monitors food and equipment inventories, conducts inventory counts and maintains inventory records., • Monitors compliance with health, safety, cleanliness, security and fire policies, standards and regulations., • Be knowledgeable of restaurant policies regarding personnel and administer prompt, fair and consistent corrective action for violations of company policies, rules and procedures. Required Knowledge, Skills and Abilities • Excellent written and oral communication skills, • Excellent organization skills, • Ability to multitask, • Working knowledge of back office tools, • Ability to quickly learn and master new computer software Education and Experience • One to two years related experience and/or training; or equivalent combination of education and experience Physical Demands • Exert up to 40 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, • Must be able to stand and exert well-paced mobility, including bending and stooping, for the duration of the workday, • Must be able to work and perform all duties at any station in the kitchen or service area General Manager Job Summary The Restaurant General Manager delivers exceptional results through others. They provide an engaging environment for restaurant teams and guests; while focusing on delivering operational excellence. Chicken Salad Chick Managers invest their time in developing future leaders, creating memorable experiences, reinforcing the Chicken Salad Chick Culture; managing administration; and maintaining the facility. The Restaurant Manager consistently keeps our brand promises, inspire their teams and deliver great results. Essential Responsibilities • Serve as a Brand Ambassador for Chicken Salad Chick., • Understand & adhere to all policies, procedures, standards, specifications, guidelines and training programs., • Understand and comply with all federal, state, county and municipal regulations pertaining to health, safety and labor requirements for the restaurant, employees and guests., • Ensure that all Guests feel welcome and are given responsive, friendly and courteous service., • Ensure that all products are consistently prepared and served according to CSC standards., • Achieve identified objectives for sales, service, quality, appearance of facility and sanitation and cleanliness through training of employees and creating a positive, productive working environment., • Develop, plan and implement restaurant marketing, advertising and promotional activities and campaigns, in accordance with the Brand Standards., • Create, communicate, implement and follow up on operations and financial action plans., • Control cash and other receipts by adhering to cash handling and reconciliation procedures., • Make employment and termination decisions consistent with Restaurant Management guidelines., • Oversee and ensure that employee performance appraisals are completed on a timely basis., • Create and maintain schedules for team., • Effectively maximize labor performance by scheduling to business trends while delivering a superb experience to every guest., • Operationally fill in as needed to ensure guest service standards and efficient operations., • Coach and motivate the Assistant Manager(s) and the team., • Continually strive to develop staff in all areas of managerial and professional development., • Prepare all required paperwork, forms and reports in an organized and timely manner., • Ensure that all equipment is kept clean and in excellent working condition through personal inspection and by following the restaurant’s preventative maintenance programs., • Ensure that all products are received in correct unit count and condition and deliveries are performed in accordance with the restaurant’s receiving policies and procedures., • Set clear expectations and create a working environment and serve as a role model to create memorable guest experiences., • Take actions to solve and celebrate guest feedback., • Control food and equipment inventories, conduct daily and weekly inventory counts and keep inventory records., • Identify problems, conduct high-level troubleshooting and seek repair/maintenance support for restaurant equipment to ensure equipment is operational., • Monitor and maintain compliance with health, safety, cleanliness, security and fire policies, standards and regulations., • Be knowledgeable of restaurant policies regarding personnel and administer prompt, fair and consistent corrective action for violations of company policies, rules and procedures. Required Knowledge, Skills and Abilities • Excellent written and oral communication skills, • Excellent organization skills, • Ability to multitask, • Working knowledge of back office tools, • Ability to quickly learn and master new computer software Education and Experience • Three to five years related experience and/or training; or equivalent combination of education and experience Physical Demands • Exert up to 40 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, • Must be able to stand and exert well-paced mobility, including bending and stooping, for the duration of the workday, • Must be able to work and perform all duties at any station in the kitchen or service area Note: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills of those in this job classification. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

Job Description We are seeking a Fire and Security Alarm Technician to join our team! You will install and repair alarm wiring and equipment. Experience preferred; however, all levels are encouraged to apply. Responsibilities: • Install and program new alarm and security systems, • Operate Scissor and Boom Lifts in industrial settings, • Must be comfortable on a ladder, • Troubleshoot and resolve issues with alarms and security systems, • Conduct routine preventative maintenance on alarm systems, • Monitor inventory of service parts, • Maintain Company vehicle cleanliness, • Professional Attitude and willingness to work Qualifications: • Prefer Previous experience in security installation, maintenance, or other related fields, • Familiarity with hand and power tools, • Comfortable in high places, • Ability to handle physical workload, • Strong troubleshooting and critical thinking skills, • Strong attention to detail, • Clean driving record for the past 3-years, • Able to read and follow plans, prints, or written instructionsCompany DescriptionLocal privately Owned Fire and Security Company, Serving the mid-south area since 1974.Local privately Owned Fire and Security Company, Serving the mid-south area since 1974.

Job DescriptionJob description: Overview The Cash Application Specialist is responsible for accurately and timely posting customer payments received through multiple channels, including ACH, lockbox, credit cards, and remote deposits. This role ensures proper application of payments to customer accounts, supports reconciliation processes, and helps maintain accurate accounts receivable records. Responsibilities • Post customer payments received through ACH, lockbox, credit card, and remote deposit channels, • Apply payments accurately to customer invoices using remittance details, • Research and resolve payment discrepancies, short payments, overpayments, unapplied cash, and unidentified receipts, • Reconcile cash receipts with bank activity and internal accounting records, • Partner with Accounts Receivable and Billing teams to resolve payment application issues, • Maintain accurate cash application records and support month-end close activities, • Follow company policies and internal controls for cash application processes, • Respond to internal and external questions related to payment applicationsQualifications, • High school diploma or equivalent required; degree in Accounting, Finance, or related field preferred, • 2+ years of experience in cash applications, accounts receivable, collections, or related accounting support, • Working knowledge of AR processes, reconciliations, debits and credits, journal entries, and account analysis, • Proficiency in accounting software, Microsoft Excel, banking platforms, and remittance processing, • Strong attention to detail, analytical skills, time management, and communication skills in a high-volume environmentPay: $20.00 - $25.00 per hour Powered by JazzHR DUHj1eqnEt