Trabajos head of operations en Chesapeake, VirginiaCrear alertas

Job Description Physical Therapist Naval Medical Center Portsmouth, VA Competitive Salary Position Overview: The Physical Therapist will be providing services to our active-duty military members currently stationed at Portsmouth Naval Base. Position Duties and Responsibilities: • Provide appropriate therapeutic procedures and provide a full range of therapy services in support of patient referrals from the following specialties: Orthopedics, General Medicine and Surgery, Primary Care Clinic, Rheumatology and others as approved by Department Head/Division Officer., • Provide for safe and timely patient care. Develop realistic and documented treatment goals that comply with and satisfy the intent of the referring medical staff., • Administer treatments involving application of physical agents, using equipment such as game ready, blood flow restriction units, mechanical traction, electrical stimulation and ultrasound machines. Evaluate effects of treatment at various stages and adjust treatments to achieve maximum benefit., • Instruct patient and family in treatment procedures to be continued at home. Evaluate, fit, and adjust the patient’s prosthetic and orthotic devices and recommend modification as required., • Provide documented treatment and discharge recommendations to members of the staff in routine, emergency, and special cases as needed., • Provide clinical direction to assistants, technicians, aides, students, etc., • Provide input and attend rehabilitation team meetings, seminars, and quality assurance meetings., • Participate in peer review activities., • HCWs assigned to Pain Management Dept. shall perform the following additional duties:, • Participate in a multidisciplinary team with other health care providers providing consultative services pursuant to optimal health care delivery to patients suffering from pain., • Participate in an on-site designated Extension for Community Healthcare Outcomes (ECHO) tele-mentoring training program., • Participate in tele-mentoring, tele-medicine and tele-consults., • Physical Medicine & Rehabilitation personnel will also perform clerical and scheduling duties in support of patient care and clinic operations and other related administrative duties as assigned. Minimum Qualifications: • Doctor of Physical Therapy degree (preferred) OR Master's degree in physical therapy for graduates prior to January 1, 2016 OR Baccalaureate degree in physical therapy for graduates prior to January 1, 2002., • Provide proof of professional development through continuing education within the last twenty-four (24) months. Possess a minimum of one (1) year experience as an outpatient orthopedic physical therapist within the preceding two (2) years OR have graduated from an accredited Physical Therapy program within the preceding year., • Active licensed as a Physical Therapist., • Must be a US Citizen. Potomac Healthcare Solutions offers the following benefits: • Medical Insurance with PPO and HSA Options (United Healthcare), • Dental Insurance (Humana)*, • Vision Insurance (Humana)*, • 401(k) with Employer Match, • Health Savings Account with Employer Match, • Prescription Drug Program, • Employer Paid Life Insurance and Short-Term Disability (Mutual of Omaha)*, • Voluntary Life Insurance and Long-Term Disability (Mutual of Omaha)*, • Relocation Assistance, • 10 Days Paid Time Off, • 11 Federal Holidays, • Continuing Education Assistance/License Reimbursement, • Employee Assistance Program, • Wellness Incentives and More NOTE: *Effective the 1st day of the month following start date About Potomac Healthcare Solutions: Potomac Healthcare Solutions is an award-winning, dynamic, and rapidly growing healthcare services company with a proven background in providing world-class health services for both government and commercial organizations. We are actively recruiting skilled, caring practitioners to support our rapidly growing program base and supported healthcare facilities. If you would like to be a part of a quality-driven organization and make a difference, we would like to talk to you! If you do not find interest in this opportunity but know of someone who may, we kindly ask that you refer the individual to Potomac Healthcare Solutions by forwarding this job posting. Potomac Healthcare Solutions, LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. #pr2

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to gain experience, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we are looking for the best at what they do' to join our team and help us grow. *Please note that due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Description: We are seeking a skilled and experienced Pipefitter III for Norfolk, VA, to support maritime ship repair and modernization projects. The ideal candidate will possess advanced proficiency in pipefitting within a shipyard or marine industrial environment, demonstrating the ability to lay out, fabricate, install, and test complex piping systems in accordance with MILSPEC, NAVSEA standards, and technical drawings. Duties & responsibilities include but are not limited to: • Interpret and apply detailed technical drawings, MILSPECs, NAVSEA standards, and Work Instructions (WIs) to perform piping system installations and repairs., • Lay out, fabricate, and install piping and tubing for various systems (fluid, drain, fuel, hydraulic, air, etc.)., • Set up, align, and operate a wide range of portable tools and hand tools used in shipboard pipefitting., • Plan and execute pipe bending operations, including layout and cutting of materials to required dimensions., • Machine pipe ends to achieve proper joint design and fit-up based on specifications, • Fabricate and install fixtures, jigs, targets, and supports to ensure alignment during welding operations., • Perform tack welding, brazing (qualified in multiple processes), and other joining techniques as needed., • Flush, clean, and pressure test piping systems and components following Technical Work Documents (TWD) and Work Instructions., • Install and modify piping systems per TEMPALT, SHIPALT, and ORDALT directives and applicable engineering instructions., • Conduct systems troubleshooting to diagnose faults and recommend cost-effective repairs solutions., • Perform and verify mechanical alignments of piping systems and equipment., • Cut, shape, bend, align, and mount piping and associated fittings/components onboard ships., • Prefabricate assemblies in a shop environment to facilitate efficient onboard installation., • Follow all safety protocols and ensure work is performed to the highest quality standards., • Support other production or maintenance tasks as assigned to meet project goals., • Exposure to open-air environments, including noisy, hot, and cold conditions., • Required to visit project sites aboard ships and rigs, both onshore and offshore., • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required., • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components., • Exposure to sound levels exceeding 100 decibels., • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect maritime components and systems, identify defects or irregularities, and safely operate tools and equipment., • May work in confined spaces with limited ventilation., • Requires prolonged periods of sedentary work, including sitting and/or standing., • May be required to operate machinery, power tools, and/or heavy equipment., • Frequent exposure to extreme weather conditions, including high heat and cold., • Must be able to lift up to 50 lbs, or more, climb ladders, and work in confined or elevated area. Qualifications: • 7 or more years of maritime or shipyard pipefitting experience required., • Familiarity with NAVSEA Standard Items, MILSPECs, and shipyard work instructions., • Strong understanding of shipboard mechanical systems and installations., • Must be able to obtain security clearance or meet access requirements for naval shipyards., • Must be able to meet the physical requirements of the job., • Must be able to pass an Audiogram & Respirator Fit Test., • Must be able to communicate effectively to exchange and comprehend information both verbally & electronically with customers & supervisors., • Must have familiarly using MS Office products (i.e. Word, Outlook ect.) Benefits: Benefits: Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of an employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you’re ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected class. “This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans.”

Job DescriptionAt INflow Federal, we’re not just building infrastructure—we’re shaping the future of national defense. We design and engineer secure, intelligent systems that empower mission success through the seamless integration of human insight and machine capability. With deep roots in Department of Defense (DoD) networks and a commitment to operational excellence, we deliver infrastructure that fuels advanced analytics, AI/ML, and data-driven decision-making at scale. Every project is an opportunity to tackle complexity head-on and build solutions that make a real-world impact. Join INflow and help lead the charge toward a smarter, more connected defense landscape. About This Position: INflow Federal is seeking a Wireless Network Engineer to join our Navy program. The NNSY's mission is to safely return warships to the Fleet on time and within budget. The CIO is responsible for installing, managing, and securing all shipyard networks and systems, approving IT acquisitions, and operating a Navy and DoD–compliant Information Assurance program. Our team supports approximately 10,000 enterprise network seats and leads initiatives to improve cyberspace efficiency while managing wired and wireless networks, secure and unclassified enclaves, mobile workforce capabilities, standalone systems, servers, circuits, applications, and end-user devices. Here, your work is more than a job—it's a journey in innovation. With opportunities to work on high-impact projects, access to the latest technologies, and a culture that thrives on creativity and collaboration, INflow Federal is where your expertise can truly make a difference. Job Responsibilities • Installing, configuring, troubleshooting, and monitoring network systems, hardware, and software applications, including, but not limited to switches, routers, wireless access points, firewalls, routing protocols, and network appliances., • Implementation of DISA Security Technical Implementation Guides (STIGs) to ensure compliance of network components. Evaluate and respond to network incidents and perform corrective actions. Support approved change management processes., • Implementing, managing, and configuring complex network environments, including routing, switching, and wireless technologies., • Reviewing security information and event management (SEIM) tools to discover and resolve network events. Implementing and managing security protocols and policies within enterprise networks. Performing root cause analysis and providing recommendations or corrective actions., • Proficiency in advanced routing protocols like EIGRP and OSPF, as well as switching technologies. Understanding and implementing SDN technologies like SD-Access and SD-WAN. Planning, designing, and implementing both local and wide-area enterprise networks., • Working with Department of Defense teams to support project objectives. Contribute to the execution of project or task plan and helps assess and resolve events and issues.Required Skills, • Switches: Network switches (Cisco Nexus series 7000/9000 and Cisco Catalyst series), • Routers: Cisco routers (Cisco 4551, 8500)., • Wireless: Cisco wireless access points (9000 series), Aruba wireless access points (AP275, 375, 515)., • Software: Cisco Wireless LAN controller (WLC), Solar Winds, Cisco ISE, Cisco Catalyst Center (aka DNA), Splunk and Aruba Wireless LAN controller.Education & Certification Requirements, • Bachelors Degree (or 3 additional years or relevant experience), • 4 years of demonstrated knowledge and experience in Cisco networks, including the design, configuration, and installation of enterprise wired and wireless networks, • CompTIA Security+ CE, • Cisco Certified Network Professional (CCNP) certification Clearance Requirements

Job DescriptionAt INflow Federal, we’re not just building infrastructure—we’re shaping the future of national defense. We design and engineer secure, intelligent systems that empower mission success through the seamless integration of human insight and machine capability. With deep roots in Department of Defense (DoD) networks and a commitment to operational excellence, we deliver infrastructure that fuels advanced analytics, AI/ML, and data-driven decision-making at scale. Every project is an opportunity to tackle complexity head-on and build solutions that make a real-world impact. Join INflow and help lead the charge toward a smarter, more connected defense landscape. About This Position: INflow Federal is seeking a Network Engineer to join our team! In this role, you will contribute to the DoD warfighter mission through your passion for technology. Here, your work is more than a job—it's a journey in innovation. With opportunities to work on high-impact projects, access to the latest technologies, and a culture that thrives on creativity and collaboration, INflow Federal is where your expertise can truly make a difference. Duties • Handles outage and maintenance tickets servicing more than 20000 users through onsite and remote troubleshooting assistance for layer 1 – 3 issues, hardware installations of new and upgraded routers, switches, COMSEC/TACLANES, McAfee intrusion prevention systems, Aruba wireless controllers, Riverbed Steelhead WANX’s, device configurations and reconfigurations, and LAN/WAN outage recovery., • This network includes Cisco, Aruba, Brocade, Juniper, Riverbed and McAfee network devices to include Routers, Switches, Access Points, Intrusion Prevention Systems (IPS), Virtual Private Networks (VPN) and WAN Accelerators., • Troubleshooting outages and resolve network related issues., • Local element for COMSEC – given briefings on troubleshooting TACLANES, Trained to re-key the TACLANES., • Install and upgrade network devices and components. This includes switches, routers, and network monitoring devices., • Expected to understand, implement, and follow processes in accordance with current policies and procedures. Performed escalation and additional tasks as directed., • Investigate, resolve, documente, and reporte the cause and corrective actions in the Incident Management System for all incidents assigned by the Service Desk.What We Are Looking For, • Knowledgeable engineer in the field of Ethernet and IP data engineering with 4 plus years’ experience as a Network Technician., • Position requires a high level of project coordination skills to manage the execution of maintenance activities and network outages., • Fundamental understanding of the OSI Model is required., • Experience must include operational support, and configuration of network devices such as servers, routers, switches, associated software tools, and cabling in a large LAN/MAN/BAN/WAN environment., • Knowledge of network protocols such as OSPF, BGP, and EIGRP is a Plus., • Knowledge and experience working with wireless technologies, Virtual Private Networks (VPN), Intrusion Prevention Systems (IPS), and WAN, • Accelerators and associated technologies is highly desirable., • You will be part of a Team of Network Technicians and Engineers.Requirements, • DoD Secret clearance, • CompTIA Security+ CE

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Description: We are seeking a highly skilled and experienced Welder III to join our team in Norfolk, VA. This position is responsible for performing complex welding tasks in support of ship repair and maritime fabrication projects. The ideal candidate will have a strong background in structural and pipe welding, a deep understanding of shipbuilding materials and techniques, and experience working in a shipyard or maritime industrial environment. The successful candidate will join our Fleet Services Group, performing various ship repair, modernization, and Alteration Installation Team (AIT) projects in support of U.S. Navy and commercial maritime clients. This role requires precision, efficiency, and a commitment to quality workmanship in both shop and shipboard environments. Essential duties & responsibilities include, but are not limited to the following: • Join, fabricate, and repair metal and other weldable material by applying appropriate welding techniques., • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems., • Fabricate and install fixtures and jigs required for welding process alignments., • Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process., • Select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD., • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards., • Install or repairs equipment, such as pipes, valves, floors and tank linings., • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding., • Operate manual or semi-automatic welding equipment to fuse basic metal segments, using processes such as flux-cored arc, carbon arc, etc., • Weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions., • Document objective quality evidence to the requisite Continental Tide Forms., • Demonstrate the ability to estimate a drawing package / installation., • Utilize the following: SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Requirements: • Must possess a high school, trade or vocational school degree., • Target of 10 years plus of direct experience in ship repair and installation of HM&E systems and equipment., • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred., • Must have or have the ability to obtain a SECRET clearance., • Must have the ability to obtain base access and security credentials., • Travel may be required within and outside of the continental United States., • Due to export control regulations, this role is open to U.S. citizens only., • Possess basic and some advanced specialized welder's tools., • Exposure to open-air environments, including noisy, hot, and cold conditions., • Required to visit project sites aboard ships and rigs, both onshore and offshore., • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required., • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components., • Exposure to sound levels exceeding 100 decibels., • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment., • May work in confined spaces with limited ventilation., • Requires prolonged periods of sedentary work, including sitting and/or standing., • May be required to operate machinery, power tools, and/or heavy equipment., • Must be able to communicate effectively to exchange and comprehend information., • Frequent exposure to extreme weather conditions, including high heat and extreme cold., • Must be able to lift and carry 30 lbs. or more, depending on the task requirements. Benefits: Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you’re ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at . “This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans.”

Job DescriptionDescription: Tamayo Federal Solutions, LLC, a Department of Defense contractor, is now hiring for DevOps Engineer to support the customer and shall provide system administration services to the Government for both physical and virtual hosted applications. You will provide all services necessary to ensure the efficient operation of all physical and virtual servers. You will support Government requirements to maintain data center computing, storage, and networking capabilities at Government data centers and within associated commercial cloud environments. We are seeking an DevOps Engineer that will be part of an energetic, results-driven team. DevOps Engineer III - At least 5 years of experience in the field or in a related area. Familiar with a variety of the field’s concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals and independently performs a wide variety of complicated tasks. May provide consultation on complex projects and is considered to be the top level contributor/specialist. May lead and direct the work of others. Design, build and maintain a stable and efficient infrastructure to optimize service delivery across production, QA, and development environments throughout the development lifecycle. Monitor, troubleshoot, maintain, and continuously improve building, packaging, and deployment processes. Implement automated infrastructure capabilities like backups, security tools, monitoring. Utilize a consistent DevOps approach to improve all phases of the process and ensure end-to-end quality across functions. Knowledge of deployment/configuration management tools like Jenkins, Maven, Puppet, or Ansible. Utilizes version control tools like GIT, Bitbucket, SVN, or CVS. Experienced with network infrastructure, database, cloud and data center operations, and security protocols. Strong knowledge of Linux and/or Windows OS. Understands AWS and other services. Experience with programming and scripting with languages like Python, Perl, Bash, PHP, Java, SQL, or C++. Typically reports to a manager or head of a unit/department. Work is generally independent and collaborative in nature. Contributes to moderately complex aspects of a project. DevOps Engineer IV - At least 7 years of experience in the field or in a related area. Familiar with a variety of the field’s concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals and independently performs a wide variety of complicated tasks. May provide consultation on complex projects and is considered to be the top level contributor/specialist. May lead and direct the work of others. Design, build and maintain a stable and efficient infrastructure to optimize service delivery across production, QA, and development environments throughout the development lifecycle. Monitor, troubleshoot, maintain, and continuously improve building, packaging, and deployment processes. Implement automated infrastructure capabilities like backups, security tools, monitoring. Utilize a consistent DevOps approach to improve all phases of the process and ensure end-to-end quality across functions. Knowledge of deployment/configuration management tools like Jenkins, Maven, Puppet, or Ansible. Utilizes version control tools like GIT, Bitbucket, SVN, or CVS. Experienced with network infrastructure, database, cloud and data center operations, and security protocols. Strong knowledge of Linux and/or Windows OS. Understands AWS and other services. Experience with programming and scripting with languages like Python, Perl, Bash, PHP, Java, SQL, or C++. Typically requires a bachelor's degree. Typically reports to a manager or head of a unit/department. Work is highly independent. May assume a team lead role for the work group. A specialist on complex technical and business matters. Requirements: Tamayo Federal Solutions, LLC offers a full package of benefits and competitive salary, excellent group medical, vision, and dental programs; 401(k); tuition reimbursement; employee training, development, and education programs; advancement opportunities; and much more! EEO/AA Employer. Protected Veterans and individuals with disabilities are encouraged to apply. Please NO RECRUITERS – Job Applicants ONLY

Job DescriptionAt INflow Federal, we’re not just building infrastructure—we’re shaping the future of national defense. We design and engineer secure, intelligent systems that empower mission success through the seamless integration of human insight and machine capability. With deep roots in Department of Defense (DoD) networks and a commitment to operational excellence, we deliver infrastructure that fuels advanced analytics, AI/ML, and data-driven decision-making at scale. Every project is an opportunity to tackle complexity head-on and build solutions that make a real-world impact. Join INflow and help lead the charge toward a smarter, more connected defense landscape. About This Position: INflow Federal is seeking a SharePoint Developer to support our Navy program. NNSY’s mission is to safely return warships to the Fleet on time and within budget. In this role, you will support the design, development, administration, and maintenance of SharePoint and Power Platform solutions that enable enterprise collaboration, workflow automation, and business process modernization. Here, your work is more than a job—it's a journey in innovation. With opportunities to work on high-impact projects, access to the latest technologies, and a culture that thrives on creativity and collaboration, INflow Federal is where your expertise can truly make a difference. Job Responsibilities • Develop, deploy, and maintain SharePoint solutions, including custom web parts, workflows, lists, libraries, content types, and site collections in both SharePoint Online and SharePoint On-Premises environments., • Administer SharePoint environments, including user permissions, security controls, and governance practices., • Configure and manage SharePoint sites, document management systems, and collaboration solutions., • Utilize SharePoint Designer, InfoPath, and Power Automate to design and automate workflows., • Design, develop, and maintain Power Apps solutions, including both Canvas apps and Model-driven apps., • Create and manage Power Automate workflows to streamline business processes and integrate with data sources such as SQL, SharePoint, and third-party APIs., • Connect Power Apps solutions to multiple data sources, leveraging Common Data Service (Dataverse) and implementing business rules within applications., • Develop client-side solutions using the SharePoint Framework (SPFx)., • Utilize modern JavaScript frameworks such as React or Angular in conjunction with SharePoint and Power Apps., • Develop custom SharePoint and Power Apps integrations using REST APIs, JavaScript, HTML5, CSS3, and jQuery., • Troubleshoot and resolve issues within SharePoint and Power Apps environments, including performance optimization, error diagnosis, and remediation., • Perform routine system maintenance and updates to ensure the stability, security, and availability of SharePoint and Power Apps solutions.Required Skills, • Proven experience developing, deploying, and maintaining SharePoint solutions in both SharePoint Online and SharePoint On-Premises environments, • Strong experience administering SharePoint environments, including permissions, security controls, and governance practices, • Hands-on expertise designing and developing Power Apps solutions (Canvas and Model-driven apps), • Proficiency creating and managing Power Automate workflows to streamline and integrate business processes, • Experience developing client-side SharePoint solutions using SPFx and modern JavaScript frameworks (e.g., React or Angular), • Ability to integrate SharePoint and Power Platform solutions with multiple data sources, including Dataverse, SQL, REST APIs, and third-party services, • Strong skills in web technologies and scripting, including JavaScript, HTML5, CSS3, and jQuery, • Experience troubleshooting, optimizing, and maintaining SharePoint and Power Apps environments for performance, stability, and security, • Ability to perform routine maintenance, updates, and lifecycle support across development, test, and production environmentsEducation & Certification Requirements, • Bachelor’s degree in an IT-related field (or a IAT Level II certification), • 7 years of SharePoint or Power Apps experience (3 years specialized)Desired Certifications, • Microsoft Certified: Power Platform Developer Associate, • Microsoft Certified: SharePoint Developer, • Other relevant Microsoft or SharePoint/Power Platform certificationsClearance Requirements

Job DescriptionAt INflow Federal, we’re not just building infrastructure—we’re shaping the future of national defense. We design and engineer secure, intelligent systems that empower mission success through the seamless integration of human insight and machine capability. With deep roots in Department of Defense (DoD) networks and a commitment to operational excellence, we deliver infrastructure that fuels advanced analytics, AI/ML, and data-driven decision-making at scale. Every project is an opportunity to tackle complexity head-on and build solutions that make a real-world impact. Join INflow and help lead the charge toward a smarter, more connected defense landscape. About This Position: INflow Federal is seeking a SharePoint Administrator to support our Navy program. NNSY’s mission is to safely return warships to the Fleet on time and within budget. In this role, you will support the administration, maintenance, and operation of SharePoint Server environments. This role supports enterprise collaboration and content management capabilities through secure, reliable SharePoint On-Premises and hybrid environments. Here, your work is more than a job—it's a journey in innovation. With opportunities to work on high-impact projects, access to the latest technologies, and a culture that thrives on creativity and collaboration, INflow Federal is where your expertise can truly make a difference. Job Responsibilities • Configuring, managing, and maintaining SharePoint Server (2016/2019) environments., • Administering web applications, site collections, content databases, and service applications., • Managing user permissions, Active Directory group integration, and SharePoint security policies., • Implementing and maintaining governance policies, backup and recovery plans, and disaster recovery strategies., • Administering and optimizing Central Administration, Search Service Application, User Profile Service, and Managed Metadata Services., • Supporting and managing migrations between SharePoint On-Premises and SharePoint Online using tools such as SPMT, ShareGate, or Metalogix., • Performing routine system health checks and applying patches, Cumulative Updates (CUs), and Service Packs (SPs)., • Monitoring system performance, reviewing logs, and responding to alerts or issues affecting SharePoint availability or performance., • Collaborating with infrastructure teams to support Windows Server, IIS, and SQL Server configurations related to SharePoint., • Investigating and resolving SharePoint errors, performance issues, and service disruptions., • Providing Tier II/III support to end users and site owners for SharePoint-related issues., • Maintaining documentation of configurations, procedures, and troubleshooting guidance., • Deploying and configuring custom or third-party SharePoint solutions, features, and web parts., • Supporting solution lifecycle management across development, test, and production environments., • Assisting with SharePoint migrations and upgrades between versions or environments.Education & Certification Requirements, • Bachelor’s degree in an IT-related field or IAT Level II certification (Security+ or higher), • 5+ years of relatable experience Desired Certifications, • Microsoft Certified: SharePoint Server Hybrid Administrator Associate, • Microsoft Certified: Windows Server Administrator, • CompTIA Security+Clearance Requirements

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for "the best at what they do" to join our team and help us grow. Attention to detail and a willingness to learn is essential as you will be fully engaged from the first day. We offer competitive wages in salaried and hourly positions, educational opportunities, relocation reimbursement, competitive employee benefit options, and a 401(k)-retirement plan with company match. We are always looking for top-talent and we look forward to new-thinkers and team-players joining our company! *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Job Description: Continental Tide is seeking a motivated, energetic, and experienced Engineering Technician with a strong electrical background and AIT leadership experience to join our ship modernization and sustainment teams in Norfolk, VA. The ideal candidate is a hands-on technical leader with expertise in U.S. Navy Hull, Mechanical & Electrical (HM&E) or Electronic Systems, capable of driving immediate results in shipboard upgrades, repairs, and system installations. Based on the initiative, the successful candidate may operate as a Project Lead and/or Electrical Subject Matter Expert (SME), the candidate will oversee shipboard electrical installations, lead technical teams, and serve as a key interface with Continental Tide's Program Managers, customers, and subcontractors. This position demands a blend of field experience, leadership capability, and deep technical understanding of Navy electrical systems. Essential duties & responsibilities include, but are not limited to the following: • Serve as the electrical SME and project lead for hull and steel repair projects, managing day-to-day operations onboard ships and in shipyard environments., • Lead electrical teams in cableway management (including lay out of cable paths and penetration requirements), cable installation, terminations, copper/ fiber connectorizations and testing requirements., • Interpret NAVSEA drawings, blueprints, and technical specifications to plan and execute electrical work packages in compliance with 9090-310 REV H or latest version., • Supervise and mentor junior, senior electricians, and helpers to ensure quality craftsmanship and safe work practices., • Collaborate with Project Leads, Program Managers, Engineers, QA &QC, and customer representatives to resolve issues and align project goals., • Assist in tracking and report daily progress, labor hours, and material usage; assist in scheduling and forecasting work., • Ensure all electrical work adheres to NAVSEA Standard Items, ABS requirements, OSHA regulations, and company policies., • Adhere to, maintain, and update all QA documentation OQE to include but not limited to preinstallation inspections, post installation inspections to include repair and testing., • Identify and mitigate project risks, support change orders, and contribute to after-action reporting., • As required perform duties and responsibilities as Site Foremen as a project lead for overall task assignment., • Submit Daily Status Reports (DSR), develop Condition Found Reports, and update progress utilizing Microsoft Project in POA&M (plans of action & milestone) format. Required Qualifications: • Target experience of ten (10) years of direct hands-on experience working with shipboard Navy HM&E or electronic systems., • Five (5) to Seven (7) years previous experience overseeing and directing 'Project-Level' initiatives within corporate or Program-level initiatives and directives., • Experience in directing daily production to attain schedule milestones., • Must be Copper Connector Certified & possess fiber optic experience, • Possess NAVSEA Cableway Inspector, Fiber and Copper Connectorization Certifications., • Proven ability to supervise technical support teams of 5 to 10 tradespersons performing electrical repairs and installations aboard Navy ships., • Demonstrated knowledge of Navy Alteration Installation Team (AIT) processes, shipboard safety procedures, and electrical system testing., • Ability to interpret NAVSEA drawings, electrical schematics, and installation standards., • Familiarity with QA practices and the generation of OQE (Objective Quality Evidence) & QAWB documentation., • Must possess or be able to obtain a Secret Security Clearance., • Possess a high school diploma, GED or industrial school certificate., • Certified in 'Multi-pin' Connectors IAW MIL-STD-2003-5B, • Certified in Fiber Optic IAW 2042C: CFOS/O, CFOS/C, CFOS/S, CFOS/T, CFOS/FC, • Minimum of seven (7) years' experience as a Marine Electrician with 3 or more years of previous supervisory responsibilities*, • Experience with maintaining budgets and material, • Certified to accomplish wire way inspections in accordance with NAVSEA Standard Items, • Experience utilizing Microsoft Office, • Ability to foresee problems, write reports and give suggestions for solving those issues., • Experience communicating directly with management, subcontractors, and customers regarding project cost, staffing, and scheduling., • Exposure to open-air environments, including noisy, hot, and cold conditions., • Required to visit project sites aboard ships and rigs, both onshore and offshore., • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required., • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components., • Exposure to sound levels exceeding 100 decibels., • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment., • May work in confined spaces with limited ventilation., • Requires prolonged periods of sedentary work, including sitting and/or standing., • May be required to operate machinery, power tools, and/or heavy equipment., • Must be able to communicate effectively to exchange and comprehend information., • Frequent exposure to extreme weather conditions, including high heat and extreme cold., • Must be able to lift and carry 30 lbs. or more, depending on the task requirements. Benefits: Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Apply Today: If you’re ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at . Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran”. “This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans.”

Job Description Location: Position requires travel so the candidate can be located anywhere within the US. Why CCI? CCI Systems, Inc. is an Employee-Owned solution provider specializing in telecommunications, comprehensive network assessments, industry-leading engineering, drafting and design services, and 24/7 support services. Come join our team of engineers and experts that guide our customers toward the right choices to future-proof their network for years to come. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking a Field Engineer to provide technical expertise pertaining to customer network upgrades, services, field management and project administration with a full understanding of HFC distribution systems. Responsibilities • Assess Outside Plant (OSP) and Inside Plant (ISP) hardware and infrastructure including but not limited to plant documentation, Hybrid Fiber Coax, (HFC) active and passives, reading and understanding OSP diagrams/drawings, taking and maintaining accurate field notes, operation of a bucket truck, accessing network enclosures and nodes and operation of testing gear., • Correct customer network failures and improve overall network performance using sweep gear and CATV test equipment., • Diagnose and repair plant related issues to reduce upstream noise and forward path impairments within the cable system with the use of standard OSP tools to include OTDR's, TDR’s, light meters, and signal strength meters., • Conduct targeted system sweeps, document findings, and deliver system information to create system reports., • Perform head end and meter set up., • Perform DOCSIS 3.1 testing and assessments., • Calculate system signal losses and make necessary adjustments to resolve issues., • Reduce and diagnose upstream noise within the cable system., • Install/align/optimize HFC equipment including fiber optic nodes and related equipment., • Install in-line devices on system backbone (node, amplifiers, line extenders, taps, splitters, and power supplies) as necessary for sweep and system upgrade projects., • Work with customers, subcontractors, and other team members in the field to define, collect, and determine information from customers and customer facilities for project requirements., • Implement and oversee a team of technically sound, customer-minded, and quality focused technicians and subcontractors tasked with delivery of best-in-the-world services to CCI Systems, Inc. customers., • Assign daily workload to in-house technical staffing and subcontract labor to enable TFS to fulfill contract obligations with customers., • Work with project managers to ensure daily field operations, staffing, quality control and deliverables are driving necessary profitability goals per project., • Approve weekly project documentation; this includes subcontractor production reporting, in-house employee production reporting, technical documentation, and other necessary documentation., • Meet with customers at local level to discuss any project related issues., • Understanding the project SOW and escalation process for deviations., • Report accurate daily project updates for productivity tracking and project billing., • Define, develop, and share technical knowledge and stay current on technical advancements., • Ensure the proper development and training of new employees to assigned project., • 5-7 years’ experience as a Coax Splicer., • 5-7 years’ experience in a HFC Sweep/Technician role within the Service Provider space., • Consulting background and experience working with multiple customers preferred., • Sweep certification preferred., • DOT Certification & Bucket Truck and Safety Certifications preferred., • Test equipment will include but not limited to the following: VIAVI SCU 1800 Sweep Generator, VIAVI OneExpert ONX-630, VIAVI DSP TDR, OTDR, VOM, and Light Meter., • Full understanding of Viavi/JDSU gear regarding sweep; includes head end and meter set up., • DOCSIS testing experience., • Full understanding of an HFC head end; combining, optics (forward and return), and basic understanding of CMTS, FTTX, and ISP., • In-Depth understanding of OSP (outside plant) and proficient in troubleshooting., • Test result evaluation and reporting., • Able to work independently on projects and take direction from teammates and develop skills to advance professionally., • Strong verbal and written communication skills., • Ability to take direction and work within timelines., • Demonstrates leadership skills to positively influence others, mentor, and collaborate with teammates, communicate on the level of others, listen, and understand people in circumstances common in the workplace. Additional information • Approximately 75% nationwide travel is required, typically 14 days on-site, travel days, and 5 days off at home., • Must have a valid driver’s license and a good driving record., • Must be able to pass a DOT Medical Examination to obtain and maintain a DOT Commercial Motor Vehicle Certification., • This is a remote position when not traveling. #LI-DNI

Job DescriptionAt INflow Federal, we’re not just building infrastructure—we’re shaping the future of national defense. We design and engineer secure, intelligent systems that empower mission success through the seamless integration of human insight and machine capability. With deep roots in Department of Defense (DoD) networks and a commitment to operational excellence, we deliver infrastructure that fuels advanced analytics, AI/ML, and data-driven decision-making at scale. Every project is an opportunity to tackle complexity head-on and build solutions that make a real-world impact. Join INflow and help lead the charge toward a smarter, more connected defense landscape. About This Position: INflow Federal is seeking a Data Center Network Architect to join our NNSY program. The NNSY's mission is to safely return warships to the Fleet on time and within budget. The CIO is responsible for installing, managing, and securing all shipyard networks and systems, approving IT acquisitions, and operating a Navy and DoD–compliant Information Assurance program. This team supports approximately 10,000 enterprise network seats and leads initiatives to improve cyberspace efficiency while managing wired and wireless networks, secure and unclassified enclaves, mobile workforce capabilities, standalone systems, servers, circuits, applications, and end-user devices. Here, your work is more than a job—it's a journey in innovation. With opportunities to work on high-impact projects, access to the latest technologies, and a culture that thrives on creativity and collaboration, INflow Federal is where your expertise can truly make a difference. Job Responsibilities • Install, configure, troubleshoot, and monitor enterprise network systems, hardware, and software applications, including switches, routers, firewalls, data center technologies, routing protocols, and network appliances., • Implement and maintain DISA Security Technical Implementation Guides (STIGs) to ensure compliance across network components., • Evaluate, respond to, and remediate network incidents, performing corrective actions and supporting approved change and configuration management processes., • Implement, manage, and optimize data center technologies encompassing network, compute, storage, automation, and security components., • Collaborate with Windows, Unix, and other server administrators to design system architectures, address technical requirements, troubleshoot issues, and implement changes within data center environments., • Apply working knowledge of Cisco data center solutions, including Nexus, UCS, ACI, and Fibre Channel technologies, to support enterprise infrastructure., • Review and analyze Security Information and Event Management (SIEM) tools to identify, investigate, and resolve network events., • Implement and enforce enterprise network security protocols and policies, conducting root cause analysis and providing corrective action recommendations., • Design, plan, and implement local and wide-area enterprise networks using advanced routing protocols such as EIGRP and OSPF and modern switching technologies., • Support and implement Software-Defined Networking (SDN) solutions, including SD-Access and SD-WAN, to enhance network performance and scalability., • Work collaboratively with Department of Defense stakeholders to support project objectives, contributing to task execution, issue resolution, and operational continuity., • Assist in the execution of project and task plans, assessing risks, resolving events, and supporting mission-critical outcomes.Required Skills, • Demonstrated knowledge and experience in Cisco networks; including design, configuring, installing enterprise network devices and working in a data center environment., • Hardware: Cisco Nexus 7000/9000 series switches, Cisco Catalyst switches, Cisco 4551 and 8500 routers, • Software: SolarWinds, Cisco Identity Services Engine (ISE), Cisco Catalyst Center (DNA Center), and SplunkEducation & Certification Requirements, • Bachelor’s degree in an IT-related discipline with a minimum of 10 years of demonstrated networking experience., • Cisco Certified Network Professional (CCNP) certification Clearance Requirements

Job Description Overview Be the reason someone feels safe in the water. As a YMCA Lifeguard, you’ll protect swimmers, prevent accidents, and create a positive, welcoming space for members and visitors. Don’t have certification yet? No problem — we provide free training and lifeguard certification!** No prior experience required. Benefits: • Free training and lifeguard certification, • Ongoing training and recertification, • Free YMCA membership to all YMCA centers, • Flexible schedules, • Opportunities for career advancement OUR CULTURE: The YMCA of Greater Kansas City’s mission and core values are brought to life by our culture. It’s who we are, who we aspire to be and how we show up every day. We are cause-driven. We don’t just show up, we show up with purpose. We are welcoming: we are open to all. We are a place where you can belong and become. We are genuine: we value you and embrace your individuality. We are hopeful: we believe in you and your potential to become a catalyst in the world. We are nurturing: we support you in your journey to develop your full potential. We are determined: above all else, we are on a relentless quest to make our community stronger beginning with you. **Candidates who are not certified may be hired at at a $15.00 training rate then increased after becoming certified. Responsibilities * Models the core values of Caring, Honest, Respect and Responsibility; implements character development and the YMCA core values in all programs and all aspects of center operations. • Continuously scan the pool (every 10 seconds), whirlpool and sauna areas, checking for safe conditions., • Must maintain high level of alertness at all times., • Staff may be videotaped for safety audit purposes and ongoing training., • Will be required to complete 2 hours of in-service training a month., • Position may require environment changes (outdoor to indoor, humid environments)., • Will be required to participate in ongoing training that will be held during operational hours (operational mannequin drops, pool safety checks, CPR checks)., • Enforce all posted rules and any other rules that are required to ensure the safety of all participants., • Must constantly watch the pool and have a rescue tube, whistle, emergency button, and supplemental oxygen barrier mask ready and available at all times, actively scanning 10 x 10. Lifeguard is not to do secondary duties in place of scanning their zone of protection., • Make sure that the pool deck is free of clutter and perform all maintenance duties assigned by Aquatic Director., • Test pool chemical levels and report changes to Aquatics Director immediately., • Fill out all Y accident and incident reports completely and turn into the Aquatics Director., • Responsible for opening and closing procedures., • Responsible for maintaining the continuity of lap swim and moving participants accordingly., • Must be able to be a team player with all staff., • Must notify appropriate staff of any unsafe conditions, needed repairs, complaints, accidents, or injuries immediately. Qualifications • Must be at least 16 years of age., • National CPR, First Aid, Emergency Oxygen, and Lifeguard or Shallow Water certification. Don’t have certification yet? No problem — we provide free training and certification!, • Perform pass and rescue skills., • Able to work with diverse groups of people in a friendly and consistent manner., • Able to pass a physical competency consisting of the following:, • Timed Event, • Must be completed in 1 minute and 40 seconds., • Starting in the water, swim 20 yards. The face may be in or out of the water. Swim goggles are not allowed., • Surface dive, feet-first or head-first, to a depth of 7 to 10 feet to retrieve a 10-pound object., • Return to the surface and swim 20 yards on the back to return to the starting point with both hands holding the object and keeping the face at or near the surface so they are able to get a breath. Candidates should not swim the distance under water., • Exit the water without using a ladder or steps.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Are you interested in joining the only national marine surface preparation painting contractor servicing every U.S. Port? If so, IMIA is the company for you. Don't miss this opportunity to become part of our dynamic team. Apply today. JOB TITLE: Utility-Clean Foreman REPORTS TO: Superintendent, Project Manager Summary of position: Supervise employees performing general labor and/or cleaning work functions for a designated job or jobs. Maintains a high quality of workmanship while supervising work force. Works with other Foremen and shipyard employees to coordinate the job. Inspects all assigned equipment for proper working conditions. Performs repairs, as necessary. May be required to perform additional duties as deemed necessary by the supervisor for the completion of the job in a safe and timely manner. May be assigned work force oversight in other areas of company operations to support critical activities to support job progress. Essential Job Requirements: Perform duties under leadership of Superintendents/Project Managers. Communicate effectively during work product inspections, represent our work during inspections with customers/customer representatives. Organize, supervise, lead, and train employees to complete projects within established guidelines and timeframe and in accordance with standard operating procedures. Provides oral and/or written instruction to workers. Supervise labor crew in all essential job requirements as required or assigned. Submit timesheets of assigned work force. Inspect assigned areas of work and correct any area not up to standard. May be required to perform additional duties as deemed necessary by the Superintendent/Project Manager. Often required to make decisions. All the above shall be performed in a safe and timely manner. Supervisory Responsibilities: Must direct large numbers of employees at one time in a productive and safe manner. Directly supervises employees and carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, making recommendation for hiring, training, planning, assigning and directing work, appraising performance, rewarding and disciplining employees, addressing complaints and resolving problems. Working Conditions: Repetitive, physical work. Regularly exposed to dusty conditions, extreme temperatures, high noise level, chemicals, fumes, airborne particles, ambient weather conditions, hazardous machinery, precarious places, proximity to other employees. Often works on scaffolds and ladders for periods of time. To avoid injury, safety clothing required along with safety devices to protect eyes, head, or hearing. Shift work and overtime involved most of the time. Travel may be required. Aptitude Requirements: Must be able to do simple to complex math. Must be able to carry out written or verbal instructions. Must be able to problem solve, organize, and prioritize work. Required Education: Must read and write with understanding Required Experience: Formal or informal on the job training and 3 years experience in the Marine Industry. Required Skills: Must be able to read and interpret documents such as job specifications, maintenance manuals, safety manuals, etc. Required to direct employees in a productive and professional manner. Physical Requirements: Stamina required; frequently required to stand, stoop, kneel, crouch, climb, and crawl. Required to reach with hands and arms, use hands to feel, grip or handle; regularly required to lift and/or move heavy objects. Must be able to lift and carry up to 50 lbs. Required to use vision for up close, distant, and peripheral inspections. Must be able to see in dim, dusty conditions. Must be able to wear dust mask and/or respirator. Physical agility required. Equipment Used: Pneumatic tools, electric tools, hand tools, vacuums, vacuum bottles, vac, compressors/compressed air, and other tools used in the maritime blasting and coating industry. Items listed are a representative sample but not an all-inclusive list. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Location Portsmouth, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Job Description We are seeking a Head Cook to join our team! You will thrive in a fast-paced environment and dedicate time to expanding our clientele base to establish the restaurant's brand and reputation. Responsibilities: • Oversee day-to-day culinary operations, • Coordinate food and kitchenware orders, • Check freshness and quality of ingredients, • Assist in the development of menu items, • Standardize recipes and plate presentations, • Previous experience in culinary arts, cooking, or other related fields, • Knowledge of cost and labor systems, • Passion for food and cooking techniques, • Strong leadership qualities, • Ability to thrive in a fast-paced environment

Job Description Norfolk Collegiate School is seeking a Director of Libraries and Innovation to provide strategic vision for the school's PK-12 innovation, library, and technology programs. This is an 11-month position that reports to the Assistant Head for Academics. This leader serves as the bridge between information literacy, digital fluency, and design thinking, ensuring that the school's resources evolve to meet the needs of our students and academic priorities. By unifying library services, research initiatives, and maker education, the Director fosters a culture of inquiry, creativity, and ethical technology use across all divisions. Key Responsibilities: • Align library services, educational technology, and innovation spaces with the school's mission to create a cohesive PK-12 program, • Collaborate with faculty to integrate design thinking, research methodologies, and digital tools into the core curriculum, • Oversee the evolution of library operations, ensuring collections and databases support diverse student interests and rigorous academic research, • Evaluate and implement educational technologies and maximize the impact of makerlabs/innovation spaces on student learning, • Lead the development of a PK-12 framework for information literacy, digital citizenship, and ethical research practices, • Stay informed about emerging trends in AI, educational innovation, and library science to serve as a thought leader and resource for faculty, • Bachelor's degree or higher in education, library & information science, educational technology, or a related field, • Leadership experience in a school setting Norfolk Collegiate is an equal opportunity employer and encourages applications from candidates of diverse backgrounds. Applicants are required to certify that all answers provided in their employment application are true and complete to the best of their knowledge. By submitting an application, the applicant authorizes the employer to investigate all statements made in the application and permits contact with institutions, previous employers, or personal references as necessary to make an employment decision. The applicant also consents to a criminal record check, if required. Submission of an application does not constitute an employment contract, nor does any offer of employment, unless explicitly documented in writing and signed by both the employer and the employee. In the event of employment, any false or misleading information provided in the application or during interviews may result in termination. Additionally, employees are required to adhere to all rules and regulations established by the employer.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Description: We are seeking a highly skilled and experienced Welder III to join our team in Norfolk, VA. This position is responsible for performing complex welding tasks in support of ship repair and maritime fabrication projects. The ideal candidate will have a strong background in structural and pipe welding, a deep understanding of shipbuilding materials and techniques, and experience working in a shipyard or maritime industrial environment. The successful candidate will join our Fleet Services Group, performing various ship repair, modernization, and Alteration Installation Team (AIT) projects in support of U.S. Navy and commercial maritime clients. This role requires precision, efficiency, and a commitment to quality workmanship in both shop and shipboard environments. Essential duties & responsibilities include, but are not limited to the following: \n • Join, fabricate, and repair metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. \n, • Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. \n, • Select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. \n, • Install or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.\n, • Operate manual or semi-automatic welding equipment to fuse basic metal segments, using processes such as flux-cored arc, carbon arc, etc. \n, • Weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. \n, • Document objective quality evidence to the requisite Continental Tide Forms.\n, • Demonstrate the ability to estimate a drawing package / installation. \n, • Utilize the following: SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • Target of 10 years plus of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n, • Possess basic and some advanced specialized welder's tools.\n, • Exposure to open-air environments, including noisy, hot, and cold conditions.\n, • Required to visit project sites aboard ships and rigs, both onshore and offshore.\n, • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required.\n, • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components.\n, • Exposure to sound levels exceeding 100 decibels.\n, • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment.\n, • May work in confined spaces with limited ventilation.\n, • Requires prolonged periods of sedentary work, including sitting and/or standing.\n, • May be required to operate machinery, power tools, and/or heavy equipment.\n, • Must be able to communicate effectively to exchange and comprehend information.\n, • Frequent exposure to extreme weather conditions, including high heat and extreme cold.\n, • Must be able to lift and carry 30 lbs. or more, depending on the task requirements.\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at . "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Welder Specialist supports marine and shipboard operations at Oceaneering's Marine Services Division (MSD) in Chesapeake, VA. This role requires advanced welding proficiency, technical judgment, and the ability to perform complex work in high-consequence environments. This role may require overtime. Travel may be required up to 25% of the year. Duties And Responsibilities \n • Perform advanced welding using TIG (GTAW), Stick (SMAW), MIG (GMAW), and Flux-Cored (FCAW) processes.\n, • Interpret blueprints, weld symbols, and technical drawings.\n, • Fabricate and repair structural and piping components.\n, • Select appropriate materials, joint configurations, and welding parameters.\n, • Perform welding in confined spaces and elevated positions.\n, • Meet visual, dimensional, and UT/RT inspection requirements.\n, • Maintain safety, quality, and housekeeping standards.\n REQUIRED \n • High school diploma/GED\n, • Minimum eight (8) years welding experience in an industrial environment, preferably in shipbuilding.\n, • Demonstrated proficiency in TIG, Stick, MIG, and Flux-Cored welding.\n, • Ability to interpret technical drawings and specifications.\n, • Ability to obtain and maintain required welding certifications.\n, • Ability to obtain Deep Submergence Systems & SUBSAFE qualifications.\n, • Must be a U.S. citizen who is not a dual citizen of any other country.\n, • Experience working in marine or naval environment.\n, • Familiarity with SUBSAFE, Deep Submergence Systems, or other high-consequence quality programs.\n, • Experience with UT/RT inspection methods.\n, • Experience with hull penetration, mechanized, and/or automatic welding.\n, • Ability to work independently and perform without oversight.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%.\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Welder Specialist supports marine and shipboard operations at Oceaneering's Marine Services Division (MSD) in Chesapeake, VA. This role requires advanced welding proficiency, technical judgment, and the ability to perform complex work in high-consequence environments. This role may require overtime. Travel may be required up to 25% of the year. Duties And Responsibilities \n • Perform advanced welding using TIG (GTAW), Stick (SMAW), MIG (GMAW), and Flux-Cored (FCAW) processes.\n, • Interpret blueprints, weld symbols, and technical drawings.\n, • Fabricate and repair structural and piping components.\n, • Select appropriate materials, joint configurations, and welding parameters.\n, • Perform welding in confined spaces and elevated positions.\n, • Meet visual, dimensional, and UT/RT inspection requirements.\n, • Maintain safety, quality, and housekeeping standards.\n REQUIRED \n • High school diploma/GED\n, • Minimum eight (8) years welding experience in an industrial environment, preferably in shipbuilding.\n, • Demonstrated proficiency in TIG, Stick, MIG, and Flux-Cored welding.\n, • Ability to interpret technical drawings and specifications.\n, • Ability to obtain and maintain required welding certifications.\n, • Ability to obtain Deep Submergence Systems & SUBSAFE qualifications.\n, • Must be a U.S. citizen who is not a dual citizen of any other country.\n, • Experience working in marine or naval environment.\n, • Familiarity with SUBSAFE, Deep Submergence Systems, or other high-consequence quality programs.\n, • Experience with UT/RT inspection methods.\n, • Experience with hull penetration, mechanized, and/or automatic welding.\n, • Ability to work independently and perform without oversight.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%.\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Welder III supports marine and shipboard operations at Oceaneering's Marine Services Division (MSD) in Chesapeake, VA. This role requires welding proficiency, technical judgment, and the ability to perform complex work in high-consequence environments. This role may require overtime. Travel may be required for up to 75% of the year. Duties And Responsibilities \n • Perform welding using TIG (GTAW), Stick (SMAW), MIG (GMAW), and/or Flux-Cored (FCAW) processes.\n, • Interpret blueprints, weld symbols, and technical drawings.\n, • Fabricate and repair structural and piping components.\n, • Select appropriate materials, joint configurations, and welding parameters.\n, • Perform welding in confined spaces and elevated positions.\n, • Meet visual, dimensional, and UT/RT inspection requirements.\n, • Maintain safety, quality, and housekeeping standards.\n REQUIRED: \n • High school diploma/GED.\n, • Minimum two (2) years welding experience in an industrial environment, preferably in the shipbuilding industry.\n, • Proficiency in TIG, Stick, MIG, and/or Flux-Cored welding.\n, • Ability to interpret technical drawings and specifications.\n, • Ability to obtain and maintain required welding certifications.\n, • Must be a U.S. citizen who is not a dual citizen of any other country.\n, • Experience working in marine or naval environment.\n, • Familiarity with SUBSAFE, Deep Submergence Systems, or other high-consequence quality programs.\n, • Experience with UT/RT inspection methods.\n, • Experience with hull penetration, mechanized, and/or automatic welding.\n, • Ability to work independently and perform with some oversight.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%.\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sound and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Performs electrical and electromechanical repairs. Assist with conducting system grooms and checkouts, and configuration validation. Prepare and install systems alterations. Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Duties And Responsibilities \n • Requires limited supervision/oversight and is familiar with the trade qualifications and can perform most tasks required as an Electrician. \n, • Assist in performing component and/or system troubleshooting to diagnose problems. \n, • Assist with the performance of on-site electrical service for system grooms and checkouts, minor repairs and system configuration validation. \n, • Prepare and install equipment or system alterations in accordance with the technical specifications. \n, • Assist with the conduct of shipboard work for electrical system/component evaluations.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine electrical systems in a repair department or shipyard.\n, • Must have the ability to obtain government base access.\n, • Knowledge and practical skills tests required.\n, • Fiber Optic Splicing, Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. \n, • Must be able to obtain a Secret/Confidential security clearance.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night\n, • Frequently working on or near moving equipment and vibrating equipment\n, • When outdoors, humidity is frequently above 90%\n, • Noise is over 85 decibels\n, • Light is intense/glare\n, • Occasional exposure to open fire/flames/sparks\n, • Frequent exposure to airborne dust, fumes, and gases\n, • Includes exposure to contaminants\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable\n, • Job tasks are performed in close physical proximity to other people\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Pipefitter III role supports Oceaneering's Marine Services Division (MSD) in Chesapeake, VA. This role requires you to read and interpret blueprints and sketches in order to repair, modify, install and dismantle various pipes and fittings associated with shipboard hydraulic, pneumatic and water systems. Strict adherence to safety and quality standards, good housekeeping habits, and a high level of critical thinking and reading comprehension will be the key to success in the role. Frequent travel and overtime may be required. Duties And Responsibilities \n • Requires no supervision/oversight, has experience in the trade qualifications, and can perform all work required as a Pipefitter and will provide mentoring to junior craftsman. \n, • Must be able to understand and perform the set up, alignment, and operation of most portable tools and hand tools used in the trade. \n, • In depth knowledge and understanding of most shipboard piping systems (repair/ installation practices, procedures, pipe bending, alignments and troubleshooting) and blue print reading. \n, • Layout material prior to performing pipe bending operations and machine parts to achieve proper joint design as per Technical Work Documents. \n, • Fabricate and install fixtures, jigs, supports and targets to ensure proper alignment during the welding process. \n REQUIRED: \n • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine piping systems in a repair department or shipyard. \n, • Must have the ability to obtain government base access. \n, • Knowledge and practical skills tests required.\n, • Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. \n, • Must be able to obtain a Secret/Confidential security clearance.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Performs electrical and electromechanical repairs. Assists with conducting system grooms and checkouts and configuration validation. Prepares and installs systems alterations. This role involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Duties And Responsibilities \n • Requires limited to no supervision/oversight, has experience in the trade qualifications, and can perform all work required as an Electrician. \n, • Must be able to follow detailed repair procedures and instructions required to complete electrical production operations.\n, • Perform installation, repair, overhaul or modification shipboard or in shop to electrical or electromechanical systems and components. \n, • Perform component and/or system troubleshooting to diagnose problems. \n, • Assist with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation. \n, • Prepare and install equipment or system alterations in accordance with the technical specifications. \n, • Perform shipboard work for electrical system/component evaluations.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine electrical systems in a repair department or shipyard.\n, • Must have the ability to obtain government base access.\n, • Knowledge and practical skills tests required.\n, • Fiber Optic Splicing, Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. \n, • Fiber Optic, Cable Way Certification and Connector Fabrication experience is preferred.\n, • Must be able to obtain and maintain a Secret/Confidential security clearance.\n, • Must be a US citizen who is not a dual citizen of any other country. \n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%.\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Performs electrical and electromechanical repairs. Assists with conducting system grooms and checkouts and configuration validation. Prepares and installs systems alterations. This role involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Duties And Responsibilities \n • Requires limited to no supervision/oversight, has experience in the trade qualifications, and can perform all work required as an Electrician. \n, • Must be able to follow detailed repair procedures and instructions required to complete electrical production operations.\n, • Perform installation, repair, overhaul or modification shipboard or in shop to electrical or electromechanical systems and components. \n, • Perform component and/or system troubleshooting to diagnose problems. \n, • Assist with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation. \n, • Prepare and install equipment or system alterations in accordance with the technical specifications. \n, • Perform shipboard work for electrical system/component evaluations.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine electrical systems in a repair department or shipyard.\n, • Must have the ability to obtain government base access.\n, • Knowledge and practical skills tests required.\n, • Fiber Optic Splicing, Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. \n, • Fiber Optic, Cable Way Certification and Connector Fabrication experience is preferred.\n, • Must be able to obtain and maintain a Secret/Confidential security clearance.\n, • Must be a US citizen who is not a dual citizen of any other country. \n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%.\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Oceaneering's Marine Services Division (MSD) is seeking Inside Machinists to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. Duties And Responsibilities CNC PROGRAMMING & SETUP: \n • Review and run CNC programs (lathe and mill) using G-code and CAM platforms. \n, • Perform the setup and basic operation of equipment, including lathes, mills, grinders, saws, and/or related shop machinery. \n REQUIRED: \n • High School Diploma/GED.\n, • Ability to perform basic machine operation, tool use, and measurements.\n, • Ability to read and interpret simple blueprints and drawings, and identify basic GD&T.\n, • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.).\n, • Ability to use basic PMI, with assistance.\n, • Ability to follow setup instructions and run programs on one machine type.\n, • Experience machining submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment.\n, • Demonstrates attention to detail. \n, • Strong communication skills with a collaborative mindset. \n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • May require working on or near moving equipment and vibrating equipment.\n, • May be exposed to intense light from welding operations.\n, • Occasional exposure to open fire/flames/sparks from welding and grinding operations.\n, • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection as required for the conditions.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Performs electrical and electromechanical repairs. Assists with conducting system grooms and checkouts and configuration validation. Prepares and installs systems alterations. This role involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Duties And Responsibilities \n • Requires limited to no supervision/oversight, has experience in the trade qualifications, and can perform all work required as an Electrician. \n, • Must be able to follow detailed repair procedures and instructions required to complete electrical production operations.\n, • Perform installation, repair, overhaul or modification shipboard or in shop to electrical or electromechanical systems and components. \n, • Perform component and/or system troubleshooting to diagnose problems. \n, • Assist with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation. \n, • Prepare and install equipment or system alterations in accordance with the technical specifications. \n, • Perform shipboard work for electrical system/component evaluations.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine electrical systems in a repair department or shipyard.\n, • Must have the ability to obtain government base access.\n, • Knowledge and practical skills tests required.\n, • Fiber Optic Splicing, Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. \n, • Fiber Optic, Cable Way Certification and Connector Fabrication experience is preferred.\n, • Must be able to obtain and maintain a Secret/Confidential security clearance.\n, • Must be a US citizen who is not a dual citizen of any other country. \n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%.\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Welder II supports marine and shipboard operations at Oceaneering's Marine Services Division (MSD) in Chesapeake, VA. This role requires welding proficiency, technical judgment, and the ability to perform complex work in high-consequence environments. This role may require overtime. Travel may be required for up to 75% of the year. Duties And Responsibilities \n • Perform welding using TIG (GTAW), Stick (SMAW), MIG (GMAW), and/or Flux-Cored (FCAW) processes.\n, • Interpret blueprints, weld symbols, and technical drawings.\n, • Fabricate and repair structural and piping components.\n, • Select appropriate materials, joint configurations, and welding parameters.\n, • Perform welding in confined spaces and elevated positions.\n, • Meet visual, dimensional, and UT/RT inspection requirements.\n, • Maintain safety, quality, and housekeeping standards.\n REQUIRED: \n • High school diploma/GED.\n, • Minimum two (2) years welding experience in an industrial environment, preferably in the shipbuilding industry.\n, • Proficiency in TIG, Stick, MIG, and/or Flux-Cored welding.\n, • Ability to interpret technical drawings and specifications.\n, • Ability to obtain and maintain required welding certifications.\n, • Must be a U.S. citizen who is not a dual citizen of any other country.\n, • Experience working in marine or naval environment.\n, • Familiarity with SUBSAFE, Deep Submergence Systems, or other high-consequence quality programs.\n, • Experience with UT/RT inspection methods.\n, • Experience with hull penetration, mechanized, and/or automatic welding.\n, • Ability to work independently and perform with some oversight.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%.\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sound and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Welder III supports marine and shipboard operations at Oceaneering's Marine Services Division (MSD) in Chesapeake, VA. This role requires welding proficiency, technical judgment, and the ability to perform complex work in high-consequence environments. This role may require overtime. Travel may be required for up to 75% of the year. Duties And Responsibilities \n • Perform welding using TIG (GTAW), Stick (SMAW), MIG (GMAW), and/or Flux-Cored (FCAW) processes.\n, • Interpret blueprints, weld symbols, and technical drawings.\n, • Fabricate and repair structural and piping components.\n, • Select appropriate materials, joint configurations, and welding parameters.\n, • Perform welding in confined spaces and elevated positions.\n, • Meet visual, dimensional, and UT/RT inspection requirements.\n, • Maintain safety, quality, and housekeeping standards.\n REQUIRED: \n • High school diploma/GED.\n, • Minimum two (2) years welding experience in an industrial environment, preferably in the shipbuilding industry.\n, • Proficiency in TIG, Stick, MIG, and/or Flux-Cored welding.\n, • Ability to interpret technical drawings and specifications.\n, • Ability to obtain and maintain required welding certifications.\n, • Must be a U.S. citizen who is not a dual citizen of any other country.\n, • Experience working in marine or naval environment.\n, • Familiarity with SUBSAFE, Deep Submergence Systems, or other high-consequence quality programs.\n, • Experience with UT/RT inspection methods.\n, • Experience with hull penetration, mechanized, and/or automatic welding.\n, • Ability to work independently and perform with some oversight.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%.\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sound and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Oceaneering's Marine Services Division (MSD) is seeking Inside Machinists with CNC programming, setup, and machining experience to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires knowledge of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. Duties And Responsibilities CNC PROGRAMMING & SETUP: \n • Review and edit CNC programs (lathe and mill) using G-code and CAM platforms. \n, • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines. \n, • Perform the setup and operation of a wide range of equipment that could include lathes, mills, grinders, saws, and/or related shop machinery. \n, • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys. \n, • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes, under some supervision. \n, • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents. \n, • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment.\n, • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances. \n, • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes. \n, • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements. \n REQUIRED: \n • High School Diploma/GED.\n, • Minimum two (2) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment. \n, • Demonstrated proficiency in CNC programming (lathe and mill). \n, • Ability to perform full setup and operate CNC and/or manual machines. \n, • Ability to edit existing programs and perform offsets as needed. \n, • Ability to read and interpret complex blueprints, drawings, GD&T, and technical specifications. \n, • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.).\n, • Ability to perform in process inspections with accurate documentation to maintain quality standards.\n, • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements. \n, • Ability to work independently, with occasional supervision.\n, • Experience with exotic alloys and challenging machining conditions. \n, • Familiarity with NAVSEA or military specifications. \n, • CAM software experience (Mastercam, SolidWorks, etc.). \n, • Demonstrates high attention to detail and quality craftsmanship. \n, • Strong communication skills with a collaborative mindset. \n, • Ability to coordinate effectively with individuals in other departments, such as Quality or Engineering.\n, • Willingness and ability to mentor less experienced Inside Machinists. \n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: \n • This position is considered SHOP/INDOORS which is characterized as follows.\n, • Primarily indoors during the day and occasionally at night\n, • May require working on or near moving equipment and vibrating equipment\n, • May be exposed to intense light from welding operations.\n, • Occasional exposure to open fire/flames/sparks from welding and grinding operations\n, • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection as required for the conditions.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Oceaneering's Marine Services Division (MSD) is seeking a highly skilled Inside Machinist with CNC programming, setup, and machining expertise to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires mastery of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. Duties And Responsibilities CNC PROGRAMMING & SETUP: \n • Review, edit, and optimize CNC programs (lathe and mill) using G-code and CAM platforms. \n, • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines. \n, • Perform the setup and operation of a wide range of equipment including lathes, mills, grinders, saws, and related shop machinery. \n, • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys. \n, • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes. \n, • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents. \n, • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment. \n, • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances. \n, • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes. \n, • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements. \n REQUIRED: \n • High School Diploma/GED.\n, • Minimum five (5) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment. \n, • Demonstrated proficiency in programming, reviewing, or editing CNC programs (lathe and mill). \n, • Ability to perform advanced setups, optimize tool paths, and improve setup instruction sheets.\n, • Ability to operate both CNC and manual machine tools without supervision or guidance. \n, • Ability to perform multi-axis machining operations (e.g., 4-axis or 5-axis mills) as applicable.\n, • Able to read and interpret advanced blueprints, drawings, GD&T, and technical specifications without supervision or guidance. \n, • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.).\n, • Ability to perform First Article Inspections and resolve dimensional issues to meet and exceed quality standards.\n, • Demonstrated knowledge and proficiency in machining practices for tight-tolerance, critical components. \n, • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements. \n, • Ability to work independently from minimal instructions and drive work through completion. \n, • Experience with exotic alloys and challenging machining conditions. \n, • Familiarity with NAVSEA or military specifications. \n, • CAM software experience (Mastercam, SolidWorks, etc.). \n, • Demonstrates high attention to detail and quality craftsmanship. \n, • Strong communication skills with a collaborative mindset.\n, • Ability to collaborate effectively with individuals in other departments, such as Quality or Engineering.\n, • Adaptable and resourceful - able to plan work and think critically in a one-off production environment. \n, • Willingness and ability to train less experienced Inside Machinists to support a culture of continued learning and growth.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • May require working on or near moving equipment and vibrating equipment.\n, • May be exposed to intense light from welding operations.\n, • Occasional exposure to open fire/flames/sparks from welding and grinding operations.\n, • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection as required for the conditions.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Oceaneering's Marine Services Division (MSD) is seeking a highly skilled Inside Machinist with CNC programming, setup, and machining expertise to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires mastery of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. Duties And Responsibilities CNC PROGRAMMING & SETUP: \n • Review, edit, and optimize CNC programs (lathe and mill) using G-code and CAM platforms. \n, • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines. \n, • Perform the setup and operation of a wide range of equipment including lathes, mills, grinders, saws, and related shop machinery. \n, • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys. \n, • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes. \n, • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents. \n, • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment. \n, • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances. \n, • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes. \n, • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements. \n REQUIRED: \n • High School Diploma/GED\n, • Minimum eight (8) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment. \n, • Ability to develop new programs or machining strategies across manual and/or CNC machines.\n, • Ability to perform advanced setups, optimize tool paths, and improve setup instruction sheets on multiple machines.\n, • Ability to operate both CNC and manual machine tools, develop fixturing and processes, and troubleshoot issues without supervision or guidance.\n, • Able to read, interpret, and evaluate advanced blueprints, drawings, GD&T, and technical specifications for manufacturability without supervision or guidance. \n, • Ability to perform multi-axis machining operations (e.g., 4-axis or 5-axis mills) as applicable. \n, • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.).\n, • Ability to perform First Article Inspections and resolve issues to make sustainable quality improvements.\n, • Demonstrated knowledge and proficiency in machining practices for tight-tolerance, critical components. \n, • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements. \n, • Ability to work independently, problem-solve, and train others. \n, • Experience with exotic alloys and challenging machining conditions. \n, • Familiarity with NAVSEA or military specifications. \n, • CAM software experience (Mastercam, SolidWorks, etc.). \n, • Demonstrates high attention to detail and exhibits technical excellence and leadership qualities to drive culture of continuous improvement. \n, • Strong communication skills with a collaborative mindset.\n, • Ability to act as a liaison between supervision and other departments, such as Quality or Engineering.\n, • Adaptable and resourceful - able to plan work and think critically in a one-off production environment. \n, • Willingness and ability to train less experienced Inside Machinists to support a culture of continued learning and growth.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • May require working on or near moving equipment and vibrating equipment.\n, • May be exposed to intense light from welding operations.\n, • Occasional exposure to open fire/flames/sparks from welding and grinding operations.\n, • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection as required for the conditions.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job Description The LHD Project Manager oversees Walashek's LHD Program for the East Coast executing our Boiler and Steam System prime contract with the US Navy. This also includes providing of strategic guidance to superintendents and lead foremen as well as assisting with business development for the Regional Manager. Responsibilities will include the oversight of all applicable projects that affect program and organizational strategies, goals and tactics. This position reports directly to the Regional Manager. Essential Duties and Responsibilities: This position is responsible for the following: (other duties may be assigned) Defines, develops, and maintains production execution for projects within assigned LHD program. Maintains close support to assigned customers, and monitors market forces that impact program. Maintains pro-active stance to keep and increase market share within the program footprint. Supports Human Resource and Corporate objectives by recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising, and reviewing job contributions; planning and reviewing compensation actions; enforcing policies and procedures. Achieves operational objectives by contributing information and recommendations to strategic plans and reviews; preparing and completing action plans; implementing production, productivity, quality, and customer-service standards; resolving problems; participate in audits; identifying trends; determining system improvements; implementing change. Meets financial objectives by forecasting project and program requirements; preparing an annual budget for assigned program; scheduling expenditures; analyzing variances; initiating corrective actions. Updates job knowledge by participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations. Enhances department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Approve purchases/expenditures related to projects/contracts. Meet margin goals for projects. Monitor expenditures against revenue for projects/contracts. Monitor project schedules and command changes to project performance as necessary in order to meet schedules. Monitor customer satisfaction during and after projects. Creates project work plans with input from foremen and Estimating Departments and revises as required. Identifies resources needed and enlists or assigns responsibilities to other team members. Develop and disperse project budgets to Superiors and Subordinates. Holds and directs a pre-job meeting with project staff (Production, QA, Procurement) to ensure understanding of scope and requirements for day-to-day management of projects. Manages day-to-day operations and ensures that production personnel within program are providing safe, quality customer service on-time and on-budget. Investigate deviances in man/hour projections and revenue projections to determine cause (change in scope, poor performance, other) to minimize exposure or recognize source of additional revenue. Perform an overall job analysis with Production and Estimating Departments to review performance and establish standards for future work. Required and/or Desired Education and Experience: Bachelor's Degree in Business Administration, Project Management, Engineering or similar disciplines 10 + years of experience in ship repair/ fabrication experience, and project management particularly with boiler and steam systems may be considered in lieu of a bachelor's degree. Ability to obtain DBIDS and TWIC Credentials for access to USN and Shipping Facilities. Possess a valid driver's license Excellent communication and organizational skills Attention to detail and problem-solving skills Excellent time management skills and the ability to prioritize work Must have strong work ethic, be self-motivated, and able to multitask Strong computer skills and proficient in all Microsoft Office suite applications Able to work in a fast-paced environment with ongoing deadlines Ability to understand and administer OSHA, ABS Classification guidelines, USCG, NAVSEA and SOLAS requirements Working Conditions: Open-air conditions such as noisy, hot, cold, as well as in an office-controlled environment. May have to visit projects aboard ships and rigs both on and offshore as well as confined spaces. Must wear hearing, eye, head protection and proper PPE when required. Visits may require standing on a variety of surfaces and at differing angles, bending over, crouching and climbing up and over obstructions such as scaffolding, ladders, and internal barge and boat structural members. Some climbing (100 feet) and lifting (50 lbs.) involved. Traverse gangways and scaffolding at varying heights while wearing fall prevention equipment. Working with hot and sometimes hazardous materials. Some travel may be required (~10% per year on average) We provide paid holidays, vacation, paid medical & dental and 401(k) benefit Job Posted by ApplicantPro

Job Description We are looking for experienced, skilled mechanics to work in an industrial environment that includes the retubing of steam surface condensers and heat exchangers. This role requires a high level of proficiency in using a variety of tools and equipment, as well as the ability to work independently and adhere to safety protocols. This position has potential for career progression as knowledge, skills and abilities are developed. Hands-on training will be provided. This is a full-time position, and the starting salary range is $15 to $27 per hour based upon relevant experience with the opportunity for advancement to managerial positions for qualified hard-working employees. Comprehensive Health Insurance Program (Dental & Medical), Long Term disability, Life Insurance: Monthly Premiums Paid in Full by Company, Pre-Loaded Health Care Reimbursement Debit Card. Optional group policies: Vision, Life, critical illness, hospital indemnity, accident, spouse and children life insurance (Employee paid). Paid Vacation, Sick Time, and Company Holidays, 401k Program with Company Match. Travel expenses paid for by the company and perdiem paid out weekly. DUTIES AND RESPONSIBILITIES: • Troubleshoot and perform routine maintenance on pneumatic and hydraulic powered tooling, equipment and torquing devices., • Operate hand, pneumatic and hydraulic power tools, equipment and torquing devices safely and with proficiency., • Employ precision measuring equipment to ensure accuracy., • Read, understand, and follow procedures and guidelines., • Work independently with minimal supervision., • Complete mandatory safety training courses in OSHA 10, Fall Protection, Scaffold Use, and Confined Space Entry as well as other safety training courses as required., • Physically capable of climbing stairs, ladders, and scaffolding to access work areas., • Demonstrate flexibility and full range of motion to stoop, crawl, crouch, and work overhead., • Lift objects weighing up to 50 lbs., • Be fit for duty and pass site-specific training and/or security background checks as required., • Use personal protective equipment as necessary including hard hat, safety glasses, hearing protection, and steel-toe or composite-toe work boots. May be required to use respiratory equipment for protection when necessary., • Work at heights and in confined spaces following all safety regulations., • Be willing and able to travel domestically and internationally for extended periods., • Support other service lines including eddy current testing, helium leak inspections, and tube cleaning as requested., • Support financial budgeting process for assigned projects or group of projects, assisting with sales forecasting and estimated project volume for planning purposes., • Interface with Customers, subcontractors, vendors, department managers, and other stakeholders while maintaining a positive and professional demeanor; gathering information and conducting research as needed to respond to Customers' technical/commercial inquires., • Strong analytical and organizational skills: must be a self-starter., • Self-motivated, energetic, and able to work independently with minimal supervision., • Must be reliable and have a strong work ethic., • Good teamwork skills to work effectively with coworkers., • Strong understanding of the use, operation, and repair of mechanical and pneumatic tooling and equipment., • Excellent problem-solving skills and attention to detail., • Commitment to safety and quality standards., • Good communication and organizational skills. Must be able to communicate effectively with colleagues, especially regarding any equipment not functioning correctly., • Previous experience as a condenser mechanic or in a similar role preferred but not required., • Knowledge of condenser operations a plus., • Experience in welding a plus., • Must be able to pass drug screenings, site access training, security background, and obtain nuclear access., • Must have a valid driver’s license, the ability to drive, and be capable of operating company vehicles., • Must have / be able to obtain a valid passport., • Vocational/Technical diploma or certification in related field preferred. Physical Requirements: • Must be able to lift 50 pounds. Medium level work - exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • Must be physically able to perform the duties described above, including reaching (including above your head), bending, climbing, pushing, pulling, twisting, squatting and kneeling to perform repairs, and working in various conditions., • Ability to travel as needed for job assignments and on short notice. We are proud to be an Equal Opportunity Employer (EOE), including disability and veterans.

We are an industry leader and one of the most respected producers of sustainable construction solutions, that is expanding its marketing team — and this position sits at the center of it all. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. Inf

Infrastructure Project Manager Seeking a project manager to assist with an Data center build, migration or Mergers & Acquisition with an IT perspective.AD migration and other IT infrastructure activities.The ideal candidate would be somewhat technical and have PM experience working on IT engineering

The company offers a collaborative environment where professionals can gain broad project exposure, develop estimating and field management skills, and grow into senior leadership roles. Candidates should bring a strong understanding of.

This role offers an exciting opportunity to contribute to the success of diverse projects while working within a collaborative and growth-focused environment. With a strong focus on quality, design, and customer satisfaction, they offer a comprehensive range of products and services that cater to di

A General Manager (GM) oversees a company’s daily operations, drives strategic growth, and ensures departmental efficiency and profitability The GM is responsible for leading all aspects of a Domino’s store operation, ensuring consistent delivery of outstanding customer service, high-quality pro

Minimum 50 hour work week with 1 day off and 1 on call day. Insure all stores are staffed and training of all team members. Self OER’s are performed 1st week of each period and that appropriate corrections are made.

This company has many years of proven excellence and shows no signs of slowing down!. If you bring 3+ years of Plumbing Project Management experience we want to hear from you. GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within mul

Jobot also prohibits harassment of applicants or employees based on any of these protected categories. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as we

SRC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with a company match, life insurance, vacation and sick paid time off accruals starting at 10 days of vacation and 5 days of sick leave annually, 11 paid holidays, tuition reimbursement, and a work environment

Hampton Roads Transit is looking to hire an ERP Technical Services manager that can deliver value to the agency utilizing Microsoft Dynamics 365 Finance and Operations software system to manage its agency finances. Proficiency in using computer systems and the listed software applications associated

Establishes work plan and staffing for each phase of project - arranges for recruitment or assignment of project personnel. Kokosing offers a competitive compensation and benefits package including medical, life, and disability insurance, paid time off and a 401K plan. Reviews project proposal or pl

Solid understanding of restaurant maintenance programs. By cultivating a team of top performers, you'll create a culture that's vibrant, optimistic, and incredibly rewarding. Your success will be reflected in the achievements of your team.

Whether you are looking to launch a new career in one of our many convenient store locations, distribution centers, store support center or with our private fleet team, we are proud to provide a wide range of career opportunities. Knowledge of inventory management and merchandising practices. One ye

The Director of Marketing and Communications for the College of Sciences is responsible for all internal and external communications for the academic unit and serves as member of the College of Sciences' external relations and leadership team. Considerable knowledge of and skill in using Microsoft O

Understands the importance of maintaining horizontal and vertical control of underwater grades (dredge templates), pay verses non-pay quantities, the use of hydrographic surveys to monitor job progress and billings, and has the ability to read & review these surveys and bucket files to ensure effici

Five (5) years of experience as a manager of a team of skilled professional, technical, and support personnel. We are a global operations and solutions integrator delivering full-spectrum intelligence analysis support, training, security, and RD&E support solutions to the Department of Defense and t