Trabajos maintenance engineer en Houston, Texas - Page 5Crear alertas

Typically, this position does not have a Chief Engineer on-site at the building and is sometimes the solo engineer at the building. Assist in maintenance/engineering issues as required. Coordinate maintenance efforts with outside contractors, tenant finish personnel, and engineers.

Job DescriptionDescription: Hotel Maintenance Attendant Department: Property Operations and Maintenance Reports To: Director of Engineering/ Chief Engineer FLSA: Non-Exempt Job Summary The Hotel Maintenance Attendant is responsible for assisting with the operation, maintenance, service and repair of equipment as assigned. He/she is also responsible for participating in the preventative maintenance program, handling guest requests and other work orders as assigned. He/she is also responsible for performing the job in a safe and efficient manner and performing trade jobs, such as carpentry, painting, plumbing, etc. May require driving a shuttle van when needed. Education & Experience • Experience in a hotel or a related field preferred., • High School diploma or equivalent required., • Licensed in a trade preferred (plumbing, electrical, HVAC, carpentry, etc.)., • Must have a valid driver’s license for the applicable state., • Must have an acceptable MVR (Motor Vehicle Driving Record) property specific Job Duties & Functions • Assist with the operation, maintenance and repair of equipment., • Change out light bulbs; perform preventative maintenance for guest rooms to include: vinyl repair, touch up paint, minor furniture repair, tub caulking, tile repairs, etc. • Perform preventative maintenance for ice machines, refrigerators, kitchen equipment, laundry equipment, HVAC, guestrooms, meeting rooms, the swimming pool and hot tub. • Perform plumbing repair, laundry equipment repair, preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request. • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings. • Perform other tasks/jobs as assigned by the supervisor or manager. Working Conditions/Environment The following outlines the work environment employees will encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. General This job description is not intended to be all-inclusive; additional details will be specified by the direct supervisor. The associate may also perform other reasonable business duties assigned by their direct supervisor.? Dreamscape Hospitality reserves the right to change this job description, job responsibilities, duties, and working hours as needs prevail. Dreamscape Hospitality is an at-will employer. This document does not constitute a contract of employment, and nothing contained in this job description issued by Dreamscape Hospitality is intended to create a contract of employment or guarantee employment. is a guideline and does not constitute a written or implied employment contract. Requirements:

Job Description JOB SUMMARY Metrology Technicians are skilled operators and interpreters of data collected with state-of-the-art “3D portable metrology technology”. This equipment includes accurate portable coordinate measuring machines (C.M.M. arms), laser trackers, probes, optical scanners, and associated measurement and post-processing software. Capability with other reverse engineering equipment is expected. This position provides services and efficiency gains to internal stakeholders and offsite customers of RMS. JOB REQUIREMENTS AND QUALIFICATIONS Quality Assurance / Inspection / Data Analysis: • Reverse engineer turbomachinery components / assemblies using portable metrology technology, traditional metrology tools (micrometers, comparators, etc.), positive material identification (X.R.F. analyzers), and portable hardness testers., • Provide clear and thorough inspections that can be post-processed and converted into preliminary 3D models or 2D CAD representations., • Understand and apply Form-Fit-Function, Geometric Dimension & Tolerancing, and other drafting best practices when reverse engineering, analyzing, and modeling components., • Perform inspections at RMS facilities or customer sites for maintenance, repair, overhaul (MRO) services, assembly clearances / alignment purposes, machine tool setups, and quality checks., • Generate reports that document inspections executed and summarize results for internal / external customers., • Retain inspected information in accordance with company procedures within digital database software and network folders., • Assist with portable metrology asset management – maintenance, calibration recall, storage, security, etc., • Maintain a clean and safe working environment. Organizational: • Ability to be self-motivated and work alone., • Ability to organize and manage multiple deadlines and priorities., • Ability to handle stressful situations in a calm-cool-collected manner., • Display ownership and accountability for tasks and responsibilities., • Excellent interpersonal and customer service skills., • Excellent verbal and written communication skills., • Ability to interpret and understand specifications, work instructions, and engineering drawings (blueprints)., • Ability to set up parts / assemblies and utilize measuring devices such as portable 3D metrology equipment, portable XRF analyzers, portable hardness testers, micrometers, calipers, thread gages, and other inspection equipment., • Ability to use hand tools, such as wrenches, clamps, vices, up to 1 ¼” REQUIRED EXPERIENCE & QUALIFICATIONS Education: • Proficient in inspection software such as Polyworks, Inspire, Spatial Analyzer, or equivalent., • Competent in CAD software such as AutoCAD, SolidWorks, or equivalent., • Knowledge of machining practices and processes., • Patience, thoroughness, and attention to technical detail., • “Trainability” – willingness and strong ability to learn and to be trained., • Professional and positive oral / written communication and interaction skills with RMS coworkers and RMS customers., • Strong problem solving, critical thinking, and analytical traits., • This is a full-time position working out of our Bethlehem, PA or Houston, TX USA facilities., • Travel is projected to be up to 50%., • This is full-time position requires a minimum of 40 working hours per week. Additional hours, including evenings, weekends, or holidays may be required based on company needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Capable of completing customer site-specific safety training (e.g., BOP+) and security credentials (e.g., TWIC), • Able to understand, read, write, and speak English., • US Citizen / Permanent Resident of the United States with a valid state issued driver’s license., • Ability and willingness to lift objects weighing up to 50 LBS. with assistance, walk, climb, reach above head, and balance., • Must not have allergies or issues related to handling metals including aluminum, bronze, copper, and various grades of steel., • While performing duties of this position, the employee will be required to stand and walk for significant portions of the working hours. While performing the duties of this position, the employee will be expected to work both in an office environment and in a shop or field service environment with exposure to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. Employee will, at all times abide by RMS and/or customer safety regulations and wear appropriate personal protective equipment (PPE) while in these areas. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Houston, TX Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job DescriptionSalary: $21.43-$33.93 ($300-$475 per day) PLEASE NOTE: This opening is NOT an entry level position. If you are not an experienced Deckhand, but would like to become one, please apply to our Maritime Training Program by clicking HERE. Efficiency. Innovation. Integrity. These are our 3 Pillars. At Curtin Maritime, these core values are the framework for safe performance and operational excellence; proof of these pillars is evident in our people and our fleet. For 25 years, Curtin Maritime has been an industry leader in quality maritime solutions. We are a dynamic Marine Construction and Marine Transportation company experiencing rapid growth. Our team provides customers with a complete suite of maritime solutions, allowing us the incredible opportunity to work on unique projects in some of the most amazing places on earth. THIS ROLE: Deckhand II, III will work directly with the Port Captain, and Vessel Captain, applying our three core values of Innovation, Integrity, and Efficiency and maintaining the Curtin Standard onboard. WHO YOU ARE: Mental Aptitudes • Ability to think clearly during stressful situations or during an emergency, • Understand and respect the chain of command; ability to take direction no matter how it is given, • Attention to detail / excellent organizational skills Physical Aptitudes • Agility to traverse uneven ground and to walk, gangways at various heights, • Agility to bend, stoop, or squat frequently and climb high steps/ladders several times a day, • Ability to lift at least 40 pounds safely; moving equipment that is heavy, large, or awkward, • Physical dexterity and strength to catch and handle lines; make up tows with wire rigging; operate deck machinery; work on equipment that is poorly accessible, • Ability to work below decks in an area that may experience periods of darkness; work in confined spaces, • Ability to perform emergency duties and use emergency equipment onboard vessel, • Must be able to swim, • Demonstrate good personal hygiene, always maintain cleanliness DECKHAND II - $300 - $400/day LICENSES & REQUIREMENTS: • TWIC Card, • Pass CG physical & drug test, • MMC (Ordinary Seaman), • CG Medical Certificate, • Passport, • STCW Basic Training PREFERRED LICENSES & REQUIREMENTS: • Able Body Seaman Endorsement (Unlimited, Limited & Special), • STCW Proficiency Survival Craft (Lifeboatman) RESPONSIBILITIES AND GOALS: • Ability to work independently on projects and tasks, • Work safely as directed by supervisor, • Proactively learn and become proficient with the various vessels in our fleet and understand your basic functions as a deckhand on them., • Completed Labor Training Program binder KNOWLEDGE AND SKILL: • Understanding of Curtin Standard and safety procedures, • Basic knowledge to assist as needed with painting, forklift operations, rigging, welding, electrical, and engineering work On Deck: • Making and breaking tow, various configurations (tow wire, push, hip), • Making off lines on cleats, H-bitts and double bitts, • Basic VHF usage, • Basic vessel maintenance, including painting and prepping for paint, greasing, caring for lines and rigging, etc., • Throwing lines (on/ off bits, heaving and grapple lines), • Basic barge calling, • Barge tie up/untie, • Crane signaling and rigging Marlinspike: • Splices (3, 8, 12 strand; molly hogan wire), • Knots (bowline, clove hitch, round turn & 2 half hitches, timber hitch) Engine Room: • Reading gauges/ logging and being able to identify when something is operating outside of normal specifications to notify the Chief Engineer or watch officer., • Clean and inspect equipment, • Trace systems, • Perform basic maintenance/ services House Duties: • Maintain fresh water levels, • Shopping / provisioning, • Inventorying, cooking, cleaning DECKHAND III - $400 - $475/day LICENSES & REQUIREMENTS: • All those listed in DH II, • Able Body Seaman-Special (MT only), • STCW Proficiency Survival Craft (Lifeboatman-Ltd), • Qualified Rigger (Dredge only), • OSHA 30 (Dredge only) PREFERRED LICENSES & REQUIREMENTS: • All Those Listed in DH I and DH II, • STCW RFPNW (MT only) RESPONSIBILITIES AND GOALS: • Work safely as directed by supervisor, • Ability to identify maintenance needs and plan projects and tasks to correct them, • Experienced in use of the Vessel Management System, • Ability to run the deck and lead the deck crew for all operations KNOWLEDGE AND SKILL: On Deck: • Anchor handling, • Rigging tandem tows, • Preparing and rigging barges for tow, • Advanced cargo lashing, • Advanced barge calling/ piloting Engine Room: • Basic electrical, plumbing, carpentry, and mechanical knowledge. House Duties: • Ability to lead deck crew in planning and stowing for long voyages. This includes creating long term food menus, forecasting use of consumables, etc. WHAT WE OFFER: • Competitive Compensation, • Generous benefits package including:, • Medical, • Dental, • Vision, • Short-term Disability, • AD&D/Life Insurance, • 401k (with company match), • Additional option to elect incremental Life Insurance for employee and dependents, and choice to elect Health and/or Dependent Flexible Spending Account. Curtin Maritimeis an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. POSITION PURPOSE NEXERPA's Capital Project Manager will oversee and manage major capital projects valued between $500K - $5M at our chemical manufacturing facilities located across the U.S. The ideal candidate will have a direct experience in project management within the chemical manufacturing industry and a proven track record of successfully delivering Capital projects safely, on time and within budget. The position will require travel to the manufacturing facilities where the projects are located and to vendor locations across the US. 50% travel is expected in this position. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Project Planning and Execution:, • Develop comprehensive project execution plans outlining scope, goals, deliverables, resources, budget, and timelines., • Lead project kickoff meetings to ensure all stakeholders understand project objectives and roles., • Oversee the execution of project plans, ensuring adherence to schedules and milestones., • Budget Management:, • Prepare detailed project budgets, including cost estimates, resource allocation, and contingency planning., • Monitor and control project expenditures, ensuring projects stay within budget., • Working with Project Controls Engineer, conduct financial analysis and reporting to senior management., • Team Coordination:, • Assemble and lead cross-functional project teams, comprised of technical and process engineering, operations, maintenance, procurement, and safety personnel. Team members also include design and construction contractors., • Facilitate regular team meetings to track progress, address issues, and ensure alignment., • Foster a collaborative team environment to drive project success., • Risk Management:, • Identify potential project risks, including technical, financial, and operational risks., • Develop and implement risk mitigation strategies and contingency plans., • Monitor risk factors throughout the project lifecycle and adjust plans as necessary., • Quality Assurance:, • Establish quality control processes and standards for each project., • Leverage MIQA and Inspections functions to conduct quality audits and inspections so as to ensure compliance with industry regulations and safety protocols., • Address any quality issues promptly to maintain project integrity., • Stakeholder Communication:, • Maintain clear and effective communication with all stakeholders, including senior management, project teams, and external contractors., • Provide regular project updates at Monthly Steering Team Meeting, including progress reports, risk assessments, and financial status., • Manage stakeholder expectations and address any concerns or issues., • Performance Monitoring:, • Conduct post-project critiques to identify areas for improvement., • Implement corrective actions to address any deviations from project plans., • Continuous Improvement:, • Implement best practices and continuous improvement initiatives to enhance project efficiency and effectiveness., • Stay updated on industry trends and advancements in project management methodologies., • Promote a culture of continuous learning and development within the project team. QUALIFICATIONS: In order to be qualified for this role, the following is required: • Education: Bachelor’s degree in Chemical, Mechanical or Electrical Engineering, Project Management, or a related field., • Experience: Minimum of 10 years of experience in project management within the chemical manufacturing industry, with a focus on capital projects., • Skills: Strong leadership, organizational, and problem-solving skills. Proficiency in project management software and tools. Excellent communication and interpersonal skills., • Knowledge: In-depth understanding of chemical manufacturing processes, safety regulations, and industry standards., • Certification: PMP certification is a plus WORK ENVIRONMENT: • The Project Manager will be expected to lead multiple projects at multiple locations at the same time. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.

Job Description Primoris Power Solutions simplifies complex power projects by assembling the perfect team and plan for your specific needs. Our Approach We focus on making projects simpler, faster, and more efficient for our clients. Our experts in engineering, permitting, procurement, estimating, project controls, and construction work together to guide you toward the most effective path forward. This comprehensive approach ensures that every aspect of your project is handled with expertise and precision. Flexible Solutions Whether you need stand-alone engineering, construction services, or a fully integrated solution, we've got you covered. We offer a full suite of project delivery methods, including Design-Build (DB) and Engineer-Procure-Construct (EPC). This flexibility allows us to adapt to your unique requirements, ensuring a project delivery approach that maximizes efficiency and value. This position is responsible for providing project management systems and technical direction to EPC projects teams for the purpose of delivering safe, cost-effective and quality execution of small to medium scale electric substation, transmission, and distribution projects and/or client accounts. This position is the single point of accountability for the successful planning, execution and closeout of projects which is accomplished through managing all aspects of projects including scope, schedule, cost, safety and quality as defined in the Project Management Book of Knowledge (PMBOK). Responsible for managing the client relationship and keeping company management informed of project status and issues. Incumbents are expected to develop advanced skills and to have the ability to work independently. Duties & Responsibilities: Under minimal supervision, the EPC Project Manager will provide: • Management of the project in accordance with Primoris Policies and Procedures, • Management of the client and project stakeholders, ensuring effective business relationships are in place and trusted by all, • All aspects of contract negotiation, change order identification, submittal and approval, administration, establishing the system to carry out the contract including management of subcontractors, • Effective change control and risk management processes, • EH&S and Quality programs appropriate for the project, • Thorough estimates and proposals, • Effective project meetings (project kickoff, client alignment, status meeting, progress review, etc), • Provide meaningful performance related feedback/input to appropriate line management and project team members, • Project reporting and status for the project team, management, and client, • Accurate project financial reports to project accounting with adequate backup for management, internal and external accounting and/or SOX requirements, • Effective financial controls to ensure project profitability and expected cash flow positions, • Minimum of 5 years’ experience in the utility industry, • At least 1+ years of past work history in EPC projects, • Experience working directly with material manufacturers in the development of Transmission Lines or HV Electric Substation projects, • Detailed knowledge of project management fundamentals, • Working knowledge of personal computers and software applications with MS office application proficiency including MS Project and/or Primavera scheduling software, • Demonstrated skills in written communications; ability to compose basic as well as complex technical documents, formal letters, invoices, • Demonstrated skills in oral communications; ability to make presentations to large, diverse groups, • High energy level with the ability to work in a fast paced, ambiguous environment with a bias for action, • Proven success in developing and maintaining internal and external relationships while effectively navigating organizational barriers, • High commitment to achieving goals and plans, • Excellent organizational, planning and time management skills, • Demonstrated negotiating and decision-making skills, • Working knowledge of project accounting practices and financial systems, • General understanding of EPC, Fixed Price, Time & Materials, Cost Plus and Unit contract pricing mechanisms, • Working knowledge of the techniques needed to lead and influence others in a matrix organization, • Bachelor of Science Degree in Engineering from accredited college or university, • State registration as a Professional Engineer, • PMP certification, • Skilled in engineering theories and principles Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit . EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Agency Statement We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-AB1

Job DescriptionDescription: Objective Project Manager is involved with the design, production, programming, testing, field service, and training of Engineered Fire Systems. Responsibilities • Review job information on new jobs., • Confirm the job package is complete with site code, discounts, etc., • Confirm that there is a clear understanding of the scope of work., • Contact the customer to follow up after initial introduction from Coordinator., • Review equipment list for compatibility and completeness., • Review the location of critical equipment (control panels, annunciators, etc.), • Obtain a copy of the Specs and read it thoroughly., • Review Drawings and Jobsite. (Fire Marshal Approved Against Wilson Fire Equipment’s), • Confirm location of critical equipment (inquire w/client if necessary)., • Confirm any variations in design from quote or estimate in the Turnover Meeting if there are any cost implications. Turnover Meeting involves Sales, Engineer and Project Manager., • Confirm all necessary specification and code compliance requirements (hardhat, steel toe, etc.), parking restrictions, working hours, prevailing wage, billing requirements, etc., • Confirm job schedule with client, if you have not received it from Project Coordinator. Critical dates in must be in writing., • Approve Budget in a timely manner, typically a 24HR Turnover., • Determine and maintain project scheduling., • Maintain weekly contact with your customer., • Layout preliminary schedule of installation showing rough-in, wire pull, device installation, start-up, and final test., • Attend jobsite meetings when applicable., • Get critical contact names and phone numbers such as electrical foreman, general contractor, etc., • Visit jobsite at least once a week prior to WFE manning the job to keep up to date on job progress., • Ensure that permit is obtained where required., • Requisition project materials for the job., • Plan Ahead, • Estimate and order materials for installation., • Request purchases of projects as to “Just in Time” in order to improve cash flow., • Coordinate with warehouse manager to stage equipment for job., • Coordinate any changes in design or delivery with client prior to any changes. Also, notify any addicted WFE employee of the changes., • Schedule Manpower, • Daily scheduling of work force, • in-house with other Project Managers and Project Coordinator, • Scheduling subcontractor work., • Oversee quality standards of subcontractors., • Approving Subcontract Cost, • Forecast installation requirements-adjust work force as needed., • Fill out and approve time sheets every Monday, • Work overtime as approved (by Installation Manager) and necessary to meet job deadlines., • Production, • Supervise and/or install system in a cost effective but quality manner., • Maintain accurate job file including all correspondence, change orders, and up to date as-built drawings., • Perform programming of system as needed, verifying that system will meet all code and specification requirements., • Perform preliminary test and final test with AHJ and/or customer., • Certify system as required by the State of Texas and local AHJ., • Schedule and Perform customer training of the system as necessary. (With service tech), • Turn in all as-built drawings, signed FMLs to Installation Admin Staff, programming disc., signoff sheets to Installation Manger at jobs end and update Navision/PM Sheet accordingly., • Administration, • Track all in-progress jobs in PM Sheets, • Submittal Package to Customer, • Track labor and equipment costs for job., • Track equipment order deliveries and notify PM, • Coordinate returned equipment for credit from manufacturer., • Submit billing information to accounting, • Log bad equipment and list what’s wrong with it per job. Have warehouse manager sign it., • Review job file at the end of the job for unpaid invoices., • Close out; final payment and retainage, warranty letters, etc., • Tools, • Keep jobsite tools and equipment secure., • Maintain an accurate tool list for each individual Field Employee., • WFE Company Trucks (Project Managers and Technicians), • Maintain a clean vehicle at ALL times, • Have all maintenance performed when needed such as tire rotation, oil changes, repairs, etc., • Current with Monthly Truck Audits – log any damages right away, • Miscellaneous, • Maintain good relationships with various contractors and customers, • Bring job in at under budget., • Working knowledge of general industrial controls., • Knowledgeable of industry manufacturers, distributors, and products., • Be proficient in the use of computer programs: Windows, Microsoft Excel, Word., • Excellent Organization skills, • Proficient in the understanding of NFPA 72, 12, 12A, 2001, the various building codes, and other applicable industry codes., • Nicet Level II in “Fire Alarm Systems”, • Nicet Level II in “Special Hazards”, • State of Texas Fire Alarm Technician’s License, • State of Texas Class A Extinguisher License.

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community “We care for our communities”, • Integrity “We act with integrity”, • Passion “We infuse passion into everything we do”, • Quality “We believe quality comes from a culture of innovation and continuous improvement”, • Serve as Project Manager on CoMET projects including management of projects from the beginning to the end., • Provide mentorship and professional development to other, technical, clerical and support staff members., • Coordinate materials testing activities with subcontractors and Raba Kistner’s field staff., • Prepare laboratory-testing assignments on projects in accordance with the testing program., • Review field data, laboratory test results for completion of client reports., • Submit draft materials testing and engineering reports for review and final reports for co-signature of assigned staff members., • Depending on experience, the employee may be required to complete a training program to familiarize themselves with field and laboratory operations., • Perform field observation services in support of the CoMET activities, as well as for construction engineering investigations., • Adhere to and support the Raba Kistner Safety program implementation and maintenance., • Review prebilling invoices on projects for which the project manager is assigned., • Prepare proposals as assigned., • Directly supervises 2 or more employees. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws., • Actively participate in specific technical and/or professional organizations as directed., • Contact and follow up with Clients on invoicing and status of payment., • Within the first six-month period, achieve an average chargeability goal of not less than 85 percent., • Immediately notify Supervisor and Chief Operating Officer of all potential disputes that may lead to legal claims or litigation., • As requested, support Chief Operating Officer to settle disputes or defend against litigation., • Bachelor’s Degree from an accredited four-year university required., • Must have three (3) to five (5) years’ experience in the CoMET industry with a range of experience in geotechnical services and one (1) to three (3) years of Project Management Experience., • Possess a competent understanding of construction plans and specifications, as well as good, accepted construction practices to be used in the review of assigned engineering reports and construction documents, • Possess valid driver’s license in applicable jurisdiction and meet firm’s auto insurability requirements. Ability to read and understand instructions, labels, reports, etc. Good oral and written communications skills and ability to work in teams at different levels within the organization. Intermediate in Microsoft Office (Word, Excel, PowerPoint, Outlook). The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee may frequently stand, walk, and drive vehicle short and/or long distances. Regularly sit, talk or hear. Occasionally use hands to finger, handle or feel, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl, and taste or smell. Occasionally lift and/or move up to 50 pounds. May be required to occasionally work near moving mechanical parts, work in high, precarious places, fumes or airborne particles, risk of electrical shock, risk of radiation, and vibration; Frequently work in outdoor weather conditions. Noise level for this position is moderate. Position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. Work responsibilities require out of town travel to Raba Kistner offices, client offices and project locations. EOE/Disabled/Veteran Drug Free Workplace #LI-ONSITE

Job Description Burrow Global has an immediate need for an experienced Capital Project Manager for a long term assignment with a chemical plant in the Deer Park area. Candidates for this position will be responsible for technical ownership and execution of engineering projects from design to commissioning and handover/completion. This role requires strong technical knowledge, excellent project management and problem-solving skills, and the ability to work collaboratively with cross-functional teams. Critical Success Factors in Role: • Technical authority on engineering design and compliance with relevant standards and codes, • Drive design, construction and commissioning to deliver project goals. Project Planning: • Input to the development of project plans, including scope, schedule, and budget., • Define project charter, scope, WBS tasks, milestones, and deliverables in collaboration with project team., • Ensure Process Safety in engineering designs to comply with internal and relevant, • industry standards, regulations, and safety protocols., • Ensuring Health, Safety and Environmental factors are addressed in design and, • engineering solutions., • Safety prioritized throughout project execution, with active leadership on safety, • addressing any safety concerns or violations promptly., • Review and approve engineering designs, drawings, and specifications, ensuring that all engineering design complies with industry standards and regulations., • Ensuring engineering standards, specifications, and quality standards are met., • Facilitate project stage gate presentation to upper management and periodic project reviews with various stake holders in the organization., • Coordinate and manage technical work packages in engineering projects, ensuring they are completed on time, within scope, and within budget from design to construction and through to completion of commissioning., • Project progress tracking, coordinating resources (personnel/materials/equipment) to meet project goals., • Provide technical expertise, resolving technical issues from design, through construction and commissioning., • Prepare and maintain comprehensive project documentation, status reports, risk, • assessments, commissioning protocols/reports and technical documentation., • Maintain and revision control project documentation, drawings, and specifications., • Report on project progress to senior management and other stakeholders., • Assist in Project closeout activities: handover of final documentation and systems to, • Identify potential project risks and develop mitigation strategies., • Monitor and manage project risks through life cycle, ensuring timely mitigation and resolution., • Implement and maintain quality assurance processes to ensure project deliverables meet required standards., • Serve as a technical point of contact for clients and stakeholders, providing regular, • updates on project status., • Address client and stakeholder concerns promptly and professionally., • Identifying and owning opportunities for process improvements, • Contribution to the execution of process optimization. Education / Certification Bachelor’s degree or equivalent in Mechanical / Chemical / Civil / EE or relevant Engineering Discipline. Professional Engineer (PE, CEng) license or equivalent is highly desired. Minimum 5-10 years’ experience working in Project Engineering or 3-5 years working in an operational role in industrial contexts, project design and delivery through construction and commissioning. Experience in chemical processing or refinery environment. Knowledge of industry-specific standards and regulations. Experience working within cross functional project teams on multiple projects, with responsibility to own engineering design through commissioning, handover, building project documentation and helping in Request to Close and financial close out of the project. Should be able to execute projects using the stage gate process with min guidance to no guidance. Proficiency in estimation and CAD software and other engineering tools like SAP PM/PP modules, Microsoft Office, and design/drafting software programs (AutoDesk suite; AutoCad, Revit, BIM) and documentation management. Active TWIC Card

Job DescriptionSalary: $110,000 - $155,000 DOE Ready to Take the Next Step in Your Career to Project Management? Curtin Maritime offers hands-on field training designed to equip you with the leadership, management, and problem-solving skills essential for success. Ourcomprehensive training and coaching programs are tailored to develop exceptional project managers who lead with confidence and competence. Efficiency. Innovation. Integrity. These are our 3 Pillars. At Curtin Maritime, thesecore values are the framework for safe performance and operational excellence; proof of these pillars is evident in our people and our fleet. For 25 years, Curtin Maritimehas been an industry leader in quality maritime solutions. We are a dynamic MarineConstruction and Marine Transportation company experiencing rapid growth. Ourteam provides customers with a complete suite of maritime solutions, allowing us the incredible opportunity to work on unique projects in some of the most amazing placeson earth THIS ROLE: As the Project Manager you will be responsible for managing all aspects of marine dredging projects including providing technical/operational expertise to estimating, participating in the preparation of the proposal, labor and resource planning, scheduling, generate and review project requirements, taking a project from preconstruction phase to final approval. WHAT YOULL DO: • The Project Manager is responsible for managing all aspects of CMC dredging projects, • Coordinates and delegates with all Curtin staff related to dredge projects Dredge Superintendents, Port Captains, Port Engineers, Crewing, Project Engineers, Field Engineers, Site Admins, HSSE & SSHOs, Dredge Captain, Dredge Crew, Auxiliary Crews, Yard Support, and Boat Captains., • Project scheduling using Critical Path Method (CPM), • Identify improvements in all systems, safety, project reporting etc., including implementing plans that will yield more efficient dredging methods, • Develop project plan that meets client requirements and timeline, • Overall responsibility for successful execution of the job, • Forecast budget and track expenditures, • Serve as primary contact with client, • Lead all daily communications and meetings with Curtin Management team, • Able to perform all duties related to the CQC Manager on USACE projects as needed, • Work with CMC Construction team to develop project plans that meet client requirements and timeline, • Assist with creation of post award client submittals and other deliverables, • Work with Crewing team to coordinate all vessel and crew needs, • Work with Crewing team to manage project logistics, • Oversee procurement of project equipment and consumables, • Manage all third-party subcontractors and rental companies in conjunction with Site Administrators, • Manage all mobilization efforts, • Oversee all required daily reporting, • Daily QC of survey, dredge plan and productions, • Monitor field engineer/surveyor for prompt distribution of daily deliverables to dredge crews, • Review materials for weekly client meeting, lead meetings, • Continually monitor site conditions for change orders or modifications, • Work closely with Finance for billing and budget tracking, • Provide technical expertise to Estimating to assist in the preparation of proposals, • Regularly track project milestones, • Identify potential conflicts or delays in the project timeline and work to resolve, • Manage resources needed to successfully complete the project, • Ensure compliance with all relevant regulatory agencies WHO YOU ARE: Certifications and Other Requirement • Bachelor's degree in Engineering (any discipline) or Construction Management preferred, • Preferred 3+ years experience in hydrographic survey and/or dredging management, • USACE Construction Quality Management for Contractors (CQM-C) Certification, • RMS competency and ability to update daily reports for clients, • OSHA 30, • 40-Hour EM 385-1-1, • Primavera P6 Certification, • Develop SOPs for dredge operations and project management, • Create cost and production estimates for bids, • Reduces downtime scenarios with excellent planning, maintaining critical spares, and implementing strategies to maximize efficiency, • Identifies and leads the charge on change orders, differing site conditions, REAs, etc., • Ability to mobilize, execute, and demobilize a dredge project from a contractual and operational standpoint with minimal guidance, • Drives cost control and manages project estimates in conjunction with Finance., • Ability to manage multiple projects simultaneously, • Responsible for all contract negotiations with the client and vendors. Conducts negotiations in good faith based on fairness, cooperation and standard of business ethics., • Creates and improves on SOPs, • Acts as a leader and mentor to other staff and new dredge staff, providing training and coaching on administrative duties, • Advanced level in Microsoft Office Applications (Word, Excel, and Outlook), • Working knowledge of AutoCAD, Hypack and/or other Survey software, • Ability to operate small marine vessels preferred, • Technical understanding of construction and maintenance of marine vessels, • Ability to read and understand technical manuals and drawings, ABS, USCG rules, • Valid Drivers License with clean driving record required, • Valid TWIC Aptitudes • Experience in identifying and anticipating design/production work sequence conflicts required, • Excellent written and oral communication skills required, • Demonstrated knowledge of scheduling, possess an ability to monitor progress to schedule and adhere to strict deadlines required, • Willingness and ability to spend time onboard the vessel going up and down staircases and vertical ladders required, • Self-motivated team player with a strong work ethic, • Strong negotiation skills both verbal and written, • Ability to get along with office staff and vessel crewmembers, • Confidence to initiate correspondence with crewmembers and staff, • Work outside as well as inside in an office environment, • Must meet fit for duty requirements upon job offer (pre-employment physical and drug test), • The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces, • Ability to lift up to 50 pounds unassisted Additional Requirements • Rotational 2 weeks on and 2 weeks off, • Willingness to travel to project sites or Long Beach yard as needed., • Ability to work on tight deadlines for project needs outside normal business hours. WHAT WE OFFER: • Competitive Compensation, • Generous benefits package including:, • Medical, • Dental, • Vision, • Short-term Disability, • AD&D/Life Insurance, • 401k (with company match), • Additional option to elect incremental Life Insurance for employee and dependents, and choice to elect Health and/or Dependent Flexible Spending Account. Curtin Maritime is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job DescriptionJob Overview: Key Responsibilities include NPI Introduction, BOM Creation/Management, Packaging definition and validation, Engineering Change management and Shop Floor system setup and maintenance. Duties and Responsibilities: • NPI activities, process failure analysis, • BOM creation/management/Engineering Change management in SAP, • Tooling definition/development for production, • Packaging definition and validation, • Hands on experience with BOM Systems, preferably SAP-S4 Hana, familiarity with packaging design, tooling/fixture design, Quality Tools like Ishikawa diagram or Kaizen/Lean knowledge, FMEA (Failure Mode and Effects Analysis) database/SQL knowledge, MS office applications, • High school diploma or equivalent required., • Completion of two years of college or graduation from a two-year technical college with an associate’s degree; or, • Six Sigma Green/Black Belt or Certified Manufacturing Engineer (CMfgE) is a plus Powered by JazzHR y85rnEzrMe

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. DCI is looking for a versatile engineer to focus on our data integration efforts while providing steady support for our core legacy applications. In this role, you will work alongside other developers to build and maintain the digital pipes that connect our internal systems with our customers and trading partners. If you're a proven engineer with a strong background in AWS and middleware platforms who has a passion for driving innovation, we encourage you to apply. Location: Tampa, FL or Channelview, TX Only candidates in these areas will be considered. This is a hybrid position with an expectation of at least three days per week in our Channelview or Tampa office. Some travel (<20%) may be required. Responsibilities * Integration Development (85%): Gather requirements, develop, test, and deploy point-to-point and multipoint integrations using AWS. * Application Maintenance (15%): Provide ongoing support, bug fixes, and minor enhancements for legacy ASP.NET and .NET Core websites. * Collaborative Delivery: Participate in code reviews, technical documentation, and team stand-ups to ensure integration patterns are consistent and scalable. * AWS Support: Assist in managing integration workflows within our AWS environment (Lambda, EventBridge, S3) * Partner Coordination: Collaborate with technical counterparts at our trading partners to troubleshoot connectivity and data flow issues. Qualifications • Must be able to work in the US for any employer, we are unable to sponsor at this time., • Education: Bachelor’s Degree in CS, Engineering, or a related technical field. 5+ years of professional software development experience. * Experience working within AWS cloud environments. * Ability to troubleshoot complex data transformations and API connectivity issues. * Solid programming skills in C# and the .NET framework. * Strong understanding of SQL and relational database concepts. Preferred Qualifications: * Experience building integrations with Boomi or Mulesoft. * AWS Certified Developer or Solutions Architect (Associate or Professional). * Experience with Event-Driven Architecture (EDA) principles. * Familiarity with containerization (Docker/ECS/Fargate). DCI BENEFITS: • Medical, Dental and Vision Insurance, • 401(k) with generous employer match, • Paid time off, • 10 Paid holidays, • Optional Health savings account & Flexible spending account, • Life insurance, • Parental leave, • Tuition reimbursement

Job Description Working within a team environment, the Repair Technician is responsible for the assembly and disassembly of gas turbine engine components using planning, tooling, workmanship standards and general instructions. Completes necessary documents as directed by the Job Process Controller and Planning Engineer. Conducts visual inspection of components for damage, defects, and wear both prior to and following welding procedures. DESCRIPTION: • Performs disassembly and assembly of gas turbine components and modules., • Inspects individual engine modules & components and assesses condition., • Inspect and clean engine piece parts and assess condition. Create quality welds according to blueprints (weld symbols)., • Responsible for the proper packaging, identifying, and moving of all finished products to the proper location., • Ensure all equipment is properly set up and used in a safe manner and that all safety devices are in use., • Operate forklift, if required and trained., • Operate air tools for blending and/or grinding welds to contour., • Interpret dimension and tolerance symbols identified on prints and verify conformance of work pieces to specifications required by prints, specifications, or procedures., • Performs first piece inspections as well as all subsequent inspections as required by RMF standards., • Monitor equipment and request maintenance when required., • Perform maintenance and repair as required. Required: • A minimum of two (2) years of experience in a manufacturing or warehouse facility, • Experience with the operation of overhead cranes and forklifts., • Possess mechanical aptitude., • Exceptional attention to detail., • Proficient in the use of hand and power tools for successful job performance., • Ability to work in a team environment and effectively communicate., • Ability to follow directions and procedures., • 2-5 years of Industrial Gas Turbine Repair experience, • 2-5 years of Welding experience operating GTAW/TIG welding machines., • Understanding of the abrasive media blast process. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions. • This position is performed in a shop environment., • Frequent standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling., • Moving, carrying, lifting, objects in excess of 50 lbs., • Working extended hours and standing for extended periods of time., • Work in both cold and hot climates., • Work in or near industrial hazards. Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off Job Summary Responsible for ensuring transformer components are produced efficiently, safely, and to the highest quality standards. collaborates with cross-functional teams, including engineering, quality, and production, to identify opportunities for process optimization, troubleshoot issues, and implement continuous improvement initiatives. The Manufacturing Engineer will support production operations by developing, implementing, and improving manufacturing processes. Key Responsibilities • Ensuring transformer components are produced efficiently, safely, and to the highest quality standards., • Manufacturing Engineers collaborate with cross-functional teams, including Engineering, Quality, and Production, to identify opportunities for process optimization, troubleshoot issues, and implement continuous improvement initiatives.Qualifications & Skills:, • Strong project management experience, • Excellent written and verbal communication skills, • Strong attention to detail, • Strong organizational skills, • Proven experience in transformer maintenance, testing, and installation., • Communication proficiency. Critical Thinking., • Interpersonal Skills. Leadership. Self-Motivated. Time management., • Proficiency in Microsoft Office products., • Environment/Physical Requirements: The candidate must be able to complete all physical requirements of the job with or without reasonable accommodation., • Education and Experience: Bachelors degree in mechanical, industrial, or Manufacturing Engineering, or related field required., • 2+ years of experience in a manufacturing or production engineering role required., • Proficiency in AutoCAD software and experience with ERP systems required Salary Salary $80.000 - $120.000 depending on experience Benefits • 401(K), • Health insurance, • Dental insurance, • Vision insurance, • Paid time off, • HolidaysWhy Join Us?, • Opportunity to work on challenging and impactful projects., • Collaborative and dynamic work environment., • Competitive compensation and benefits

Job DescriptionThe Industrial Engineer is an innovative thinker and problem solver that leads in creating, developing, and deploying process improvements to support a safe and efficient lean manufacturing facility. The ideal candidate is an excellent communicator who leads with a mindset of Kaizen (continuous improvement) and respect for people. The candidate will be responsible for driving positive change through the Quikserv Way and Quikserv Production System to establish and sustain a lean manufacturing environment. CORE VALUES: • Customer Focused (develop relationships, exceed expectations, treat customers like you would like to be treated), • Respect (employees, customers, suppliers, our brand), • Teamwork (collaboration, open communication, be passionate and have fun), • Results Driven (strong will to win; work to standard, not to time), • Kaizen (continuous improvement; embrace change; don't settle, share ideas)WE OFFER:, • Competitive pay, • Great benefits package, • Excellent growth opportunities, • Great work/life balanceJob Responsibilities:, • Executes manufacturing “CI” assignments with/without supervision in the value stream., • Create flow by implementing a lean manufacturing system that aligns with strategic objects. Including installation of assembly lines, material pull systems, and u-shaped cells., • Evaluates, assists and able to implement efficiency improvements in determined processes or equipment as assigned with and without guidance., • Evaluates and performs time studies and process observations for efficiency improvements and line balancing., • Develops and maintain standard work and other visual management tools., • Projects may include new and improved layout proposals to improve material and process flow., • Work safely utilizing PPE and following all safety procedures., • Follow all inventory control procedures while implementing Kanban processes., • Assist in training of the necessary Lean transformation tools and techniques as required., • Other duties as assigned by supervisor. Qualifications:, • BS in Industrial Engineering., • Experience in a Lean Environment/Culture and a Continuous Improvement role., • Basic CAD experience required., • Lean basic knowledge required and “practical application” of Lean Tools., • Strong experience with MS Office, including Word and Excel., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals written in English., • Ability to communicate with co-workers and management in a productive manner., • “Proven” ability to “Drive and Develop” Kaizen activity in a Manufacturing environment., • Ability to use hand tools as needed., • Self-motivated – “Driver” type personality and strives for Accuracy and Proficiency at assigned tasks., • Must support and display Quikserv Core Principles while leading by example in Safety & Quality.Physical Demands:, • Must support ability to lift 50 lbs., • Frequent standing, bending, and walking. Powered by JazzHR pOrjEjEdkk

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. DH Pace Company, Inc., will hire an Outside Commercial Sales Representative to represent our Entry Door Division for our commercial line of business in Houston, Texas and surrounding areas. You will have the opportunity to sell the following doors and door related products: Specialty Doors, Automatic Operators, Hollow Metal Doors and Frames, Door Hardware, and Electrical Hardware. If you have a knack for sales and business development, please apply! Position Overview: You will have the opportunity to directly impact sales by cultivating new customers and fostering long-term relationships in Houston and surrounding areas. • Call on commercial and industrial accounts meeting with decision makers to professionally present our commercial entry door product lines in an effort to engineer a door solution for customers such as schools, hospitals, industrial buildings, and municipalities, • Develop scope of work for each proposal and personally handle every detail from initial call to closing the sale; must be proficient with Windows based programs and sales tools, • Meet or exceed sales and gross profit performance standards, • Provide timely, accurate estimates and proposals, • Maintain and update Customer Relationship Management Systems (CRM) daily, • Prefer a minimum three (3) years of outside sales experience calling on business to business – ideally calling on commercial accounts selling new construction and retrofit projects to both end-users and contractors; however, will consider other applicable experience, especially if "mechanical" type products have been sold, • Must possess a Valid Driver's License, • Bachelor's degree, highly preferred, • Possess an ability for technical applications and mechanical systems Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job DescriptionFull Time Lead Protection & Control Field Technician We are looking for a full-time mid-level Protection & Control Engineer to join our team. The ideal candidate will have a strong understanding of protection and controls systems, as well as experience with relays, testing, and troubleshooting. The primary responsibility of this position will be to design, install, and maintain protection and controls systems for electrical power systems. The successful candidate will be able to work independently and as part of a team, and will have excellent communication and problem-solving skills. Responsibilities: • Design, install, and maintain protection and control systems for electrical power systems, • Troubleshoot and repair protection and controls systems, • Develop and implement testing procedures for protection and controls systems, • Work with other engineers and technicians to ensure the safe and reliable operation of electrical power systems Qualifications: • Bachelor's degree in electrical engineering or related field, • 5+ years of experience in the design, installation, and maintenance of protection and controls systems, • Strong understanding of protection and controls principles and practices, • Experience with relays, testing, and troubleshooting, • Excellent communication and problem-solving skills

Job DescriptionService Wire Company, a premier supplier of industrial and utility wire and cable, is currently seeking a Maintenance Supervisor in Houston, TX. If you are looking to join a great organization and a chance to become a part of our growing team, this may be the opportunity for you! Position Summary: The Maintenance Supervisor leads maintenance mechanics and electricians to ensure safe, reliable, and efficient operation of plant equipment and facilities. This role oversees preventive and corrective maintenance, partners with Production to minimize downtime, and ensures compliance with OSHA standards. Responsibilities include scheduling maintenance activities, improving equipment reliability, developing standard procedures, tracking performance metrics, training employees, and supporting continuous improvement and capital projects. Tasks/Duties/Responsibilities: • Leads a team of Maintenance Mechanics & Electricians in predictive & preventative maintenance and machine repair., • Ensure tasks are completed in accordance with OSHA standards and regulations., • Update spare parts file for part numbers creation based on needs and equipment reliability., • Ensures maintenance is scheduled in a timely manner and works closely with Production to schedule and accomplish equipment and facility repairs., • Develop and/or maintain Key Performance Indicators for tracking and reporting the performance of the maintenance function (downtime tracking, work order creation and coordination, repetitive maintenance requests, maintenance responsiveness)., • Provides long-term solutions and day-to-day support to all operating teams having issues with troubleshooting, problem analysis, equipment failures, etc., • Trains employees in proper work methods and safety procedures., • Utilize learned experiences to spread knowledge across shifts, ensuring all maintenance department learns on how to solve and address specific issues on each equipment., • Develop SOP to standardize troubleshooting techniques., • Maintains accurate records of maintenance work performed and inventory., • Sends daily reports to operational team on PM and equipment status., • Modification of PM frequencies based on known/documented failure(s) history., • OEM best-practices and feedback from mechanics/inspections., • Facilitate mechanic and operator inspections., • Creation of nonscheduled work orders, maintain history of repairs and parts used., • Identify capital needs and solutions focused on operational improvements within the facility., • Submit purchase requests based on projects and equipment reliability., • Participate in securing project job bids process and providing recommendations.Knowledge/Skills/Requirements:, • High school diploma or equivalent and 3+ years of maintenance or process/project engineering experience required., • Bachelor’s Degree in Engineering and previous leadership experience preferred., • Strong sense of urgency and decision making, capability to adapt with good planning and priority setting skills., • Experience with process controls and extrusion., • Advanced troubleshooting techniques in mechanical and electrical fields (e.g. PLCs, instrumentation, gearboxes, extruders, dryers, mixers, vacuums, pumps, etc.), • Thorough knowledge of maintenance systems, work order processes, preventive/predictive maintenance, TPM, inventory and scheduling software preferred., • Strong leadership skills (conflict resolution, facilitation, change management skills, decision making, empowerment and delegation) preferred., • Strong written and verbal communication skills., • Proficient with MS Word, Excel, and Outlook.Reports To:, • Plant Maintenance Engineer

Job Description The Test Engineer Data Analyst is responsible for ensuring the availability, accuracy, and analysis of production, product quality, and test system data. The role focuses on transforming complex datasets into meaningful insights through regular reporting, trend analysis, and visualization to support data driven decision making and continuous improvement initiatives. Key Responsibilities * Ensure the availability, integrity, and reliability of production, product quality, and test system data. * Analyze data and generate regular reports (daily, weekly, and ad hoc), including weekly summaries for management review. * Interpret key performance indicators (KPIs), draw conclusions, and provide actionable recommendations for process improvement. * Actively participate in the development and optimization of production and testing processes by supporting data-driven problem-solving activities. * Design, establish, and continuously improve reporting structures and dashboards, including visualization of production and quality indicators. * Develop and maintain data collection tables, diagrams, and visual aids to support cross-functional decision-making. * Identify, analyze, and interpret trends and patterns within complex datasets. * Ensure the ongoing maintenance, accuracy, and reliability of databases and data systems. Compliance and Workplace Standards * Reporting & Accuracy: * Prepare and deliver assigned reports accurately, professionally, and within defined timelines. * Ensure data reflects realistic and factual conditions. * 5S / Workplace Organization: * Maintain a clean and organized workplace in accordance with company 5S standards. * Environmental Protection: * Comply with corporate Environmental, Health, and Safety (EHS) policies and ISO 14001 requirements. * Occupational & Fire Safety: * Adhere to all company regulations related to workplace safety, accident prevention, and fire safety. Qualifications and Experience Required Qualifications * Bachelor’s degree in Economics, Information Technology, Engineering, or a related technical field (or equivalent education). * 3–5 years of professional experience in data analysis, production controlling, or a related role. * Strong database management skills and advanced proficiency in MS Office and Power BI. * Proficient written and spoken English (communication level). Core Competencies * Strong analytical and problem-solving skills. * High level of accuracy and attention to data quality. * Proactive mindset with a positive, solution-oriented attitude. * Ability to work independently as well as collaboratively in cross-functional teams. * Flexibility and capability to perform effectively under pressure. Powered by JazzHR xJ9SINDRm3

Job DescriptionCompany Description What We Live By…… The McWane Way is a core philosophy outlined by the founder J.R. McWane in 1920. Today It encompasses Teamwork, Excellence, Leadership, Environment, Communication, Accountability, Safety and Trust. All team members at every level are expected to know and work by these principles, values, and behaviors. Most importantly, every team member is expected to be able to answer this question, “What does this mean for me?” This is the all-important question because behavior is the best evidence of a living principle. Join the McWane team on the journey to The McWane Way. Who We Are…… McWane Inc. has a newly created division, McWane Plant and Industrial (MPI). This new division, based in Birmingham, AL, combines all Plant and Industrial Products in a single customer-focused package. We offer comprehensive solutions through an experienced team of professionals specifically focused on these two special markets. Our Mission is to be the Plant and Industrial supplier who is “easiest to do business with”. We will make it easier to engineer, specify, and order components for plants. We will provide greater support for smoother delivery, cost-effective installation, and start-up. Most importantly, we will build strong relationships with design engineers, contractors, plant operations teams and project owners to assure we are their first-choice supplier for both new construction and future upgrades. At MPI, you will be part of a fast-paced, collaborative, start-up where you can see, firsthand, how your work translates into positive results. Excellent Benefits include 9 paid holidays plus 2 floating holidays, 3 week vacation accrual the first year, a weekly pay schedule, M-F day shift and OT as required. 401k plan and company health insurance plans, Education Assistance, Wellness Program & Employee Assistance Program. Job Description Position: General Worker Reports to Branch Manager Hourly Rate: $21.91 - $24.10 24-month wage progression plus shift differential Description McWane Plant & Industrial is seeking a General Worker to join our Job Shop Fabrication and Machining operation. The General Worker will perform a variety of tasks assisting with the operation of the plant. This role will also assist colleagues in the servicing, repairing, and adjusting of various pieces of equipment throughout the plant. May assist in performing daily cleaning inspections and maintenance of the plant equipment in order to ensure safe, reliable, and compliant operations that maximize production and minimize interruptions. Additional responsibilities may be assigned. Qualifications Basic Qualification • High School Diploma, GED, or equivalent experience, preferred, • 1st Responsibility - Ensuring personal safety and the safety of your team members., • Assists supervisors and managers in maintaining a safe and healthy work environment., • Wears appropriate PPE which may include fall protection, respiratory protection, hearing protection, foot, hand, head and eye protection., • Responsible for cleanliness of the assigned work area as well as maintaining a safe and clean work environment., • Proactively promotes the McWane Way principles., • Operate machinery used in the production process and or assist machine operators., • Saw cutting ductile iron pipe 3” – 48” diameter and from lengths 1 foot to 20 feet using specified equipment and tools, • Lift raw materials, finished products, and packed items, manually or using hoists and Forklift trucks., • Painting completed products, • Stack, crate, secure items for shipment, • Examine products to verify conformance to quality standards., • Observe and inspect equipment and operations to ensure they are working properly, • Count finished products to determine if product orders are complete., • Mark or tag identification on parts., • Load and unload items from machines, conveyors, and conveyances., • Record information, such as the number of products completed, or dates and times of product production., • Follow all processes and procedures associated with the Clear Water Safety Management Program. Advise management of any deviations from this program., • Regular full-time attendance is an essential function of the job., • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle or feel objects, tools or controls., • The employee is required to communicate both verbally and written in English., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl., • Must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds., • Must be able to meet and adhere physical requirements as well as adhere to wearing the appropriate PPE (steel toed boots, safety glasses and hearing protection), • Must be able to work in dust and fumes., • Will be required to work overtime and extended hours depending on customer and company demands., • Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises., • Must have some knowledge of industrial tools, their uses, and maintenance., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus and determine and distinguish color., • Must have the ability to operate a forklift and obtain certification. Additional Information McWane is a Federal VEVRAA contractor and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA - gender identity or expression, and genetic information) or any other category protected by federal, state or local law. LIMITATIONS AND DISCLAIMER The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. McWane Plant & Industrial. is an EEO/AA employer M/F/D/V. It is the Company's policy to provide equal opportunity for all qualified persons and to prohibit discrimination on the basis of race, color, sex, national origin, religion, age, disability, marital status, sexual orientation, gender identity, citizenship status, or any other legally protected status. We maintain a drug-free workplace and reserve the right to perform substance abuse testing as needed. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Job Description Working within a team environment, the Repair Technician is responsible for the assembly and disassembly of gas turbine engine components using planning, tooling, workmanship standards and general instructions. Completes necessary documents as directed by the Job Process Controller and Planning Engineer. Conducts visual inspection of components for damage, defects, and wear both prior to and following welding procedures. DESCRIPTION: • Performs disassembly and assembly of gas turbine components and modules., • Inspects individual engine modules & components and assesses condition., • Inspect and clean engine piece parts and assess condition. Create quality welds according to blueprints (weld symbols)., • Responsible for the proper packaging, identifying, and moving of all finished products to the proper location., • Ensure all equipment is properly set up and used in a safe manner and that all safety devices are in use., • Operate forklift, if required and trained., • Operate air tools for blending and/or grinding welds to contour., • Interpret dimension and tolerance symbols identified on prints and verify conformance of work pieces to specifications required by prints, specifications, or procedures., • Performs first piece inspections as well as all subsequent inspections as required by RMF standards., • Monitor equipment and request maintenance when required., • Perform maintenance and repair as required. Required: • A minimum of two (2) years of experience in a manufacturing or warehouse facility, • Experience with the operation of overhead cranes and forklifts., • Possess mechanical aptitude., • Exceptional attention to detail., • Proficient in the use of hand and power tools for successful job performance., • Ability to work in a team environment and effectively communicate., • Ability to follow directions and procedures., • 2-5 years of Industrial Gas Turbine Repair experience, • 2-5 years of Welding experience operating GTAW/TIG welding machines., • Understanding of the abrasive media blast process. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions. • This position is performed in a shop environment., • Frequent standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling., • Moving, carrying, lifting, objects in excess of 50 lbs., • Working extended hours and standing for extended periods of time., • Work in both cold and hot climates., • Work in or near industrial hazards. Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

Job Description Outside Sales Manager - Refinery Solutions Houston Tx $100,000 - $130,000 + uncapped commission O&G, and Petro-Chemical – Refineries Gaskets & Mechanical Sealing Solutions We require a sales professional with knowledge of the oil and gas industry. Our client is seeking a dynamic Sales Engineer/Business Development Manager/Outside Sales Manager to join the team in Houston, Texas! What you will have: • Proven track record in refinery sales, • Experience with MRO (Maintenance, Repair, and Operations), • Expertise in selling through distribution channels, • Familiarity with EPC (Engineering, Procurement, and Construction) projects, • Develop and execute strategic sales plans for our refinery solutions, including high-performance gaskets and mechanical sealing systems., • Build and maintain relationships with key decision-makers in the industry., • Collaborate with engineering teams to provide tailored solutions for sealing challenges in refineries, such as high-pressure and high-temperature applications., • Competitive base salary plus uncapped commission structure, • Opportunity to work with cutting-edge refinery technologies, including advanced gasketing and mechanical sealing solutions., • Extensive training and professional development programs Key Products: • Gaskets: High-temperature, high-pressure gaskets designed for reliability and safety in petrochemical processes. The best part of this is, if you are successful in getting the job, we guarantee that you are going to love it. Why? For every 100 people we recruit, 96% are still with their company 12 months later, and 94% are still there 2 years later. That speaks for itself. Want to be a part of this? Of course, you do! If you have the entrepreneurial spirit and passion this position requires then get in touch now before the deadline expires. To apply, click on the apply button below, contact Gareth Symms, or call the Mercury Hampton office directly on 01925 937 311 or WA for Business on +441925 377 097. We aim to respond to all successful applicants within two working days.

Job Description Who We Are Thermon is a diversified technology company and a global leader in industrial process heating, temperature maintenance, environmental monitoring and temporary power distribution solutions. We deliver engineered solutions that enhance operational awareness, safety, reliability and efficiency to deliver the lowest total cost of ownership. Thermon offers over 250 products, software and services across multiple brands, providing a range of offerings from boilers, transportation heaters, and liquid load banks to tubing bundles and heat trace. We are the silent guardians of critical infrastructure. From the relentless demands of chemical plants and the intricate networks of rail and transit to the vital pulse of power generation, we innovate solutions that ensure optimal operation, protect critical assets, and maximize efficiency. We care deeply about the success of our customers, the well-being of our people, and the reliability of every product we design. This drives our unwavering commitment to safety and integrity in everything we do. Through collaboration, we unite a rich legacy of expertise with a trusted global team, partnering side-by-side with our customers. We transfer the warmth needed to make life work. The Role The Sales Manager will be responsible for driving growth across all company product lines and services within the assigned territory, focusing on serving existing customers while expanding into new markets and industries. Key Responsibilities and Accountabilities include • Grow the territory revenue with supportive margins through new projects, new customers, organic growth, market share acquisition and new / expanding markets, • Develop and execute sales strategy, initiate contact with existing and potential customers, • Develop sales forecasts, territory potentials, territory analysis and collaborate with management in setting adequate sales quotas and goals, • Analyze periodically sales objectives for both present and prospective customers, sales and service activity demands and programs for effective sales coverage, • Work cross functionally within the company to communicate with key EPC and Turnaround contacts in the Refining, Chemical, and Petrochemical sites, • Professionally manage assigned territory to achieve bookings targets, • Create and maintain relationships with customers to better understand and achieve their needs in turnarounds and new construction projects, • Make visits to key turnaround teams to identify opportunities for future outages, • Responsible to manage and keep updated information for all opportunity reporting through our CRM sales tool to monitor the opportunities in customers' accounts, • Pro-actively promote and sell Thermon's products and services by visiting customers on a regular, daily, weekly, monthly, as many times as needed and planned basis, • Address customer complaints in accordance with company policy and advise management promptly of any situation beyond the scope of authority, • Influence and develop specifications, track and influence all potential projects, monitor project and purchase order awards to assure customer satisfaction, • Provide feedback and direction to any Thermon dept. on all matters of : opportunity, competition, loss, change, problem of market intelligence and strategy for territory, • Develop strong, long-term, business relationships with customers, • To prepare and present professional presentations to customers relating to Product Services to customer management and staff, • Discuss, negotiate and finalize proposals with customers, • Act as single point of contact when required on difficult company problems with customers to co-ordinate complex customer problems internal and external, • Promote and organize customer visits to Thermon facilities, • Provide advice/ assistance to credit and collection, marketing and completes sales Key Characteristics, Competencies and Skills • Ability to work autonomously and drive results with minimal direct supervision, • Self-driven and motivated, • Able to effectively initiate, develop and maintain multi-level working relationships with customer organizations, • Exceptional customer service skills with the ability to establish and maintain strong customer relationships, • Superior teamwork and leadership skills across a multi-faceted organization, • Strong written and verbal communication skills, • Outgoing, friendly, enthusiastic and sociable, • Experience with CRM is a plus (especially Microsoft Dynamics), • Proficient in use of Microsoft Office Software (Word, Excel, Outlook, PowerPoint, etc.), • Must be comfortable giving and participating in customer training presentations, • Strong sales track record, • "Hunter" sales mentality - ability to help develop a territory from scratch Qualifications • Bachelor of Science in Industrial Distribution, Engineering Technology, Electrical or Mechanical Engineering, • Minimum 2 years work experience as a Sales Engineer, Sales Account Manager or Sales Manager, Industrial product outside sales, preferably selling trace heating systems., • Experience dealing with Refining and Petrochemical projects and plants, construction experience is a plus, • Articulate complex electrical distribution scenarios to engineering groups and well-accustomed to a client-facing role Regular Activities: • Willingness and ability to travel up to + 50% of the time

Are you an experienced engineer or technical professional with the curiosity, initiative, and drive to transition from hands-on engineering into project and portfolio management?. Bachelor of Science in Engineering or STEM discipline, or related technical field. Master’s degree in engineering or r

A Bachelor’s Degree in Engineering, Construction. Certified Professional Maintenance Manager (CPMM).

Job Title: Junior Electrical Engineer. CACI is seeking a Junior Electrical Engineer to support our customer at NSWC Crane. Support electrical system analyses at all levels for total system product integration to include: concept, design, fabrication, test, installation, operation, maintenance and di

KBR’s areas of expertise include engineering, logistics, operations, science, program management, mission IT and cybersecurity. As stewards of critical missions for the Department of Defense, Intelligence Community, NASA, and other key federal entities, we excel in engineering, logistics, operatio

Engineering & Facilities Maintenance Technician 2 (MT2). Engineering & Facilities Maintenance Technician 2 (MT2). You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures.

Under this contract KBR will provide facility maintenance, procurement, critical supply functions, along with foodservice, base camp operations, renovations, construction, and medical services. A Bachelor’s Degree in Engineering, Construction, Facilities, Contracts or related field.

ABOUT Aviation Electronics, Electrical, and Computer Systems Technicians (AV) work on some of the most advanced aircraft systems in the world.They maintain, diagnose, and repair complex electrical and electronic equipment, supporting critical functions such as radar, communications, navigation, and

Responsible for inspecting, maintenance, repairing and preventive maintenance on sites Power Quality, Ground Support Equipment, Fire and Safety Hazards, Lighting Standards, Comprehensive Electrical System Surveys, Electrical System Inspections. Air Force, KBR provides security, base operations, main

Reviews and approves architectural /engineering drawings. Develops and maintains relationships with other engineering organizations to keep abreast of developments in allied fields. Five (5)+ years’ experience with general maintenance, operations, and repair including and not limited too: HVAC, pl

Additional Cash Award available - Apply today to learn more!.This position will dispatch from your home and service our Grand Forks, ND customers.When you join DIRECTV, you'll be a part of a team that's supporting our customers from the front lines.Whether it's connecting them to the latest technol

Electricians: Journeyman and apprentices only with a minimum of 2 years of experience REQUIRED.Pay Range: $33,800-$100,000 per year Work in Houston and greater Houston Area.Ability to work out of town as well.

Coordinate with internal and external stakeholders, including engineers, contractors, vendors, and customers, to ensure that project requirements are met. Bachelor's degree in Engineering, Construction Management or related field.

A degree in a relevant field such as Construction Management, Civil Engineering, or a related discipline is preferred.

Hybrid Schedule + Strong Comp + 401k Match | Build, Own & Grow.This Jobot Job is hosted by: Sierra Johnson.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $110,000 - $130,000 per year.This isn’t your average logistics company — we’re a gl

ABOUT Aviation Electronics, Electrical, and Computer Systems Technicians (AV) work on some of the most advanced aircraft systems in the world.They maintain, diagnose, and repair complex electrical and electronic equipment, supporting critical functions such as radar, communications, navigation, and

Well-known architecture firm looking for a Senior Project Manager with an architecture license with healthcare.This Jobot Job is hosted by: Kal Mayer.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $120,000 - $140,000 per year.An international comp