Trabajos makeup en Norfolk, VirginiaCrear alertas

Job Description Job Title: Variable Refrigerant Service Technician Reports to: Variable Refrigerant Director of Technical Operation FLSA Status: Full Time, Non-Exempt (Eligible for overtime) We are 100% employee-owned through an Employee Stock Ownership Plan (ESOP). This is a retirement benefit for our employees that is wholly paid for by the company in addition to 401(k) options for employee contributions. There are approximately 7,000 ESOPs in the United States, governed by the IRS and the U.S. Department of Labor. Research indicates that ESOP companies tend to grow faster in sales and employment. ESOP employees tend to have 2.2 times as much in retirement savings as employees in traditional companies. Position Purpose: The primary purpose of the Variable Refrigerant Service Technician is to provide job site surveys during equipment installation, startup/commissioning of new equipment and systems, warranty service, owner direct preventative maintenance, and troubleshooting/repair services on variable refrigerant air conditioning equipment. This work involves both heat pump and heat recovery variable refrigerant systems including the system control network. This work also includes associated ancillary equipment such as dedicated makeup/outdoor air units. Hoffman is currently the manufacturer’s representative for Daikin Variable Refrigerant equipment. While Daikin is our primary brand and most of our workload, we also provide end user service support for numerous other brands of variable refrigerant equipment. Strong emphasis on customer service. This position may occasionally involve after hour call outs to provide emergency repairs. Provide guidance and direction to administrative personnel to effectively plan, schedule, coordinate, etc. all activities related to field variable refrigerant service and construction/replacement work. Hoffman Mechanical Solutions, Inc. is a company focused on being #1 in the HVAC industry in providing the most innovative HVAC solutions through superior design and customer service. Employment at Will: Nothing herein is intended to create a contract of employment or to guarantee employment for a definite duration. Variable Refrigerant Service Technician Duties and Responsibilities: • Service a variety of HVAC products and equipment and ensure customer satisfaction. Heavy emphasis on variable refrigerant equipment and systems., • Read and understand blueprints, equipment manuals, and engineering specifications to properly diagnose and repair units., • Use a variety of hand-tools and specialty equipment typical of the commercial HVAC Service trade., • Perform job site visits to monitor installation of new equipment. Provide technical support to installing contractor and report installation defects to management as needed., • Provide start up and commissioning service upon completion of construction. Support installing contractor to resolve problems that prohibit proper startup and commissioning. (i.e. piping leaks, communication faults, improper equipment mounting, improper piping installation, etc.), • Perform routine system preventive maintenance by utilizing manufacturer specific data logging device to analyze system performance. Must be able to understand the data and analyze in detail so minor problems such as faulty sensors are found prior to significant equipment damage., • Respond to service calls and utilize manufacturer specific data logging device to troubleshoot and diagnose variable refrigerant equipment and systems. Must be able to find root cause of failure and must be able to make the necessary repairs., • Identify, analyze, diagnose, and repair other non-variable refrigerant systems and products at customer’s location., • Survey customer site for properly operating equipment and report any deficiencies found. Provide sales leads to internal associates as necessary., • Perform preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepare in advance for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating various trades for on-site work., • Diagnose/troubleshoot inoperable equipment and develop action plan for repairs and problem resolution., • Determine replacement parts required, secure materials, and complete repairs on a timely basis. Return any non-used or refundable parts for credit., • Interact face to face with customers to ensure proper and accurate communications exist., • Document all work performed by accurately completing field service reports, equipment log sheets, etc., • Complete and submit all required paperwork on a timely basis., • Operate and be diligent in properly caring for and maintaining a company vehicle., • Provide technical support to customers., • Flexible to work overtime/weekends as necessary to meet customer requirements., • Limited travel required but may include occasional overnight stays., • Stay informed on industry news and trends, products, services, competitors, and relevant information about existing and emerging technologies, and the latest product-line developments. Attend company training seminars to become familiar with product lines. • Conduct oneself in a professional manner as a positive representative of the company both to the customer and public. Knowledge/Experience/Critical Skills Required: • Education/Experience – associate degree or equivalent from a Technical/Trade School with a certificate in Heating, Ventilation, and Air Conditioning. Minimum of Five (5) years related experience preferred or an equivalent combination of education and experience., • Operational knowledge of computers and Microsoft Office software preferred., • Ability to read, comprehend, and write simple instructions and short correspondence. Ability to effectively present information in one-on-one and small group situations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to understand data presented in a graphical format such as pie charts, bar graphs, etc., • Ability to recognize problems and develop the most cost-effective solution. Ability to collect data, establish facts, and draw valid conclusions., • Must pass pre-hire requirements including background check, motor vehicle report, and drug screening., • Must possess valid drivers’ license., • Must possess EPA mandated card for safe refrigerant handling. Universal certification preferred. Physical Demand Requirements: • In order to properly perform the duties of this job, the employee is regularly required to stand, talk, hear and use hands/fingers in order to grasp/handle/feel. The employee frequently is required to walk, reach, stoop, kneel, crouch, climb up and down ladders and/or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. This position requires close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • This position requires frequent working outdoors, inside mechanical/equipment rooms, regularly being exposed to extreme inside/outside weather conditions to include extreme hot and/or extreme cold. This position is regularly exposed to live voltage, moving mechanical parts, and heavy equipment. Frequent exposure to wet and/or humid conditions, elevated and/or precarious workplaces, fumes or airborne particles, risk of electrical shock and vibration. Occasional exposure to toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is typically loud., • Standing: Frequently, • Walking: Frequently, • Sitting: Occasionally, • Stooping: Frequently, • Handling/Fingering: Frequently, • Climbing: Frequently, • Bending: Frequently, • Pushing/Pulling 12 lbs. or less: Frequently, • Lifting/Carrying 10 lbs. or less: Frequently, • Lifting/Carrying 11-50 lbs.: Frequently, • Lifting/Carrying 51-75 lbs.: Occasionally, • Reaching Outward: Frequently, • Reaching Above Shoulder: Frequently, • Squatting/Kneeling: Frequently, • Driving: Frequently This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions, Inc. EOE/Disabled/Veterans

Job Description Whispering Pines Assisted Living Luray, VA Job Title: Cook and Cook Aide Department: Kitchen Reports to: Kitchen Manager Position Summary: prepare meal for resident, family member, guest, and staff, following designated menus, in a manner that optimized nutrition and enhances the dining experience. Consistently uphold the principles, service standards, philosophy and mission Position Responsibilities – Service • Routinely interact with residents to determine and enhance their satisfaction with the meal program, • Ensure an attractive presentation of food on each plate, • Prepare meals according to the daily menu plan and/or as directed by Kitchen Manager, • Serve meal and beverages on times according to meal times. Not early. Not late., • Adjust or adapt recipes to accommodate specific dietary needs, when possible, • Monitor and adhere to portion control standards, • Prepare meals in accordance with sanitary regulation and facility policies and procedures, • Adhere to all proper handling, labeling, and storage protocols for all foods, • Properly document meal intakes and fluid intakes, • Identify and communicate resident dislike and likes with kitchen manage, • Assist in keeping noise levels down during meal times, • Wash, dry, and put away all dishes, • Restock items that are running low or out, • Accommodate sick meals to resident in the dining or bedrooms, • Clean dinging room floor and tables after each meal, • Clean kitchen before leaving shift, • Stock Resident refrigerator and storage bens daily, • Participate in and attend all required in-services training sessions, • Report to administrator refusal and zero percentages of meal intakes, • Communicate any staff or resident issues with the kitchen manage and administrator, • All other duties assignedTeam Effort:, • Assist in ensuring compliance with State and Local Regulations, • Assist Dietician and kitchen manager in developing new menu items and recipes and ordering, • Assist in appropriately interacting with residents, family members and other guest, • Assist all other departments with other duties as needed and/or assigned by Kitchen Manager or AdministratorAction:, • Respond to resident emergencies; provide first-aid assistance and arrange for appropriate medical attention and follow-up, • Practice safety in working around and with equipment, chemicals, tools, and utensils, • No horse playing or agitating resident, • Always call residents by their proper name Ex. Mr. or Mrs. (last name) Dawson or Mrs. Betty (first name, if requested.) Do not reference residents as Nana, Granny, Papa, or other pet names. Reputation: • Maintain professional relationships with all employees - no arguing, • Maintain good hygiene and a professional appearanceSuccess:, • Contribute to resident satisfaction by ensuring that customer’s expectations are met or exceeded, • Maintain efficient and appropriate communication with residents, family members and guest, • Contribute to marketing efforts through appropriate interaction with prospective resident and guest Job Title: Cook and Cook Aide Essential skills, experience and abilities: • Ability to organize and manage multiple priorities, • Strong customer orientation to older adults, • Excellent interpersonal and communication skills, • Positive attitude, enthusiasm and energy, • Ability to read , write, comprehend and follow direction in a recipe, • Prior dining service experience in high column setting, • Previous experience working in a senior living environmentNonessential skills and experience:, • High school diploma or equivalent certificateReporting to the position: No direct reports Dress Code, Tattoos, Piercing and Hygiene • Dietary Department – White or Black Top, Black slacks or pants., • Shoes: Athletic shoes and nursing shoes are acceptable. All shoes need to be slip resistant. No open toe, open back shoes or Croc type shoes. Shoes must be closed toe with back and always worn during working hours. Excludes, Community Relations, Administrator, Resident Care Coordinator, Director, LPN, • Name tag. Required and always visible., • Hair should be clean and presentable as well as up out of the way of care. Long hair should be pulled back. Dietary must wear hair net., • Heavy extremely colorful heavy eye makeup and excessively long eyelashes are not permitted., • Fingernails should be of professional length to provide care safely to residents. ¼ to ½ inch in length. Jewels, beads, heavy glitter nail polish is not permitted. Nails should be clean and filed in a round shape., • No earrings, or jewelry that dangle more than ½ inch., • No lip or eyebrow rings., • No nose or facial piercings, ear or nose rings or bars. Piercings that dangle or hang from the face, ears or nose are prohibited. Facial piercings must be removed prior to shift. Covering is not permitted., • No visible tattoos on the neck, hands, or arms. Tattoos that can be considered objective, vulgar, gang related, or sexually explicit in content must be covered with a garment (ex. sleeve or undershirt) while in the community., • No hoodies, sweatshirts, coats, or jackets are to be worn over the uniform. A long sleeve shirt, under armor shirt or turtleneck are all acceptable examples of what can be worn under the uniform. Head coverings, hats, scarves, wraps, bandanas, etc. are not permitted to be worn while working in the community. Exclusions: Religious requirement. Maintenance employees may wear hats. Dietary employees will wear hair nets, chef hats, and apparel that is required for compliance. Physical Demands and Work Environment: The physical demands and work environment characteristics described her are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: While performing the duties of this job, the employee is often required to stand, walk, sit, use fine and gross motor skills, reach with hands and arms, balance, stoop, kneel, crouch, talk, hear, and or smell. An individual must have the reading ability at the level to comprehend notes. An individual in this position will be required to lift or carry weight in up to 75 pounds. . The employee occasionally works in high precarious places and is frequently expels to heat and risk of electrical shock Intermittent physical activity includes lifting and supporting residents. . The employee must be free of diseases that can be transmitted in the performance of job responsibilities during the stage of communicability. The employee must use proper body mechanics. Work Environment: While performing the duties of this job, the employee is exposed to minimal to moderate noise. The employee will be exposed to blood and/or body fluids. The employee may encounter traumatic situations, such as having to care for mentally ill resident and contact the deceased residents. Employee will be scheduled based on operational needs (e.g., shift rotation, standby, on-call, ect) SLEEPING IS NOT PERMITTED DURING WORKING HOURS. General Sign-Off: This Job Description is intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required of personnel so classified. The employee must be able to work in a fast-paced environment with demonstrated ability to juggle and prioritize multiple, completing tasks and demands and to seek supervisory assistance as appropriate. The employee is expected to adhere to all company policies and procedures. Powered by JazzHR FBtp4Uvjrb

Company Description Cos Bar is a luxury beauty retailer that showcases best-in-class products from prestigious and innovative brands, offering formulas that are both highly effective and elegantly crafted. The company is known for providing a refined, welcoming experience that blends warmth with timeless sophistication. Cos Bar serves a discerning clientele seeking elevated skincare, makeup, fragrance, and wellness essentials. Customers can explore curated selections and personalized service in-store or . Role Description The Store Manager role at Cos Bar is a full-time remote position responsible for overseeing daily store operations and ensuring an exceptional customer experience. This role includes managing sales performance, monitoring key metrics, and guiding the team to meet revenue and service goals. The Store Manager will lead, coach, and develop store staff, oversee scheduling, and maintain brand standards for merchandising and visual presentation, often through remote coordination and communication tools. Additional responsibilities include implementing company policies, managing inventory processes, supporting marketing and promotional activities, and collaborating with leadership to identify opportunities to improve store performance and customer satisfaction. Qualifications • Candidates should possess strong retail and store operations skills, including sales management, inventory oversight, and visual merchandising., • Candidates should possess leadership and people management skills, such as team coaching, performance management, and conflict resolution., • Candidates should possess customer service and clienteling skills, including relationship building, problem-solving, and the ability to deliver a luxury-level experience., • Candidates should possess organizational and administrative skills, including time management, scheduling, and reporting., • Candidates should possess communication and collaboration skills, with the ability to work effectively in a remote environment using digital tools., • Experience in beauty, luxury retail, or related industries is highly beneficial., • Previous experience as a Store Manager or in a supervisory retail role is preferred., • High school diploma required; an associate or bachelor’s degree in business, retail management, or a related field is a plus.

Job Description *Dredge Experience Required* Clamshell Dredge Experience Preferred DREDGE ENGINEERS – MULTIPLE OPENINGS Live anywhere in the US. Curtin Maritime provides fully paid, company-coordinated travel to and from the vessel. Efficiency. Innovation. Integrity. These are our 3 Pillars. At Curtin Maritime, these core values are the framework for safe performance and operational excellence; proof of these pillars is evident in our people and our fleet. For 25 years, Curtin Maritime has been an industry leader in quality maritime solutions. We are a dynamic Marine Construction and Marine Transportation company experiencing rapid growth. Our team provides customers with a complete suite of maritime solutions, allowing us the incredible opportunity to work on unique projects in some of the most amazing places on earth. THIS ROLE: Engineers will work directly with the Port Engineer, and Vessel Captain, applying our three core values of Innovation, Integrity, and Efficiency and maintaining the Curtin Standard onboard. Schedule: This is a full-time position. Days and hours are project specific and will require significant time/travel away from home. This position frequently requires long hours, weekend work, and offshore travel. WHO YOU ARE: Mental Aptitudes • Attention to detail / excellent organizational skills, • Ability to handle stressful situations with focus, including safe and effective decision-making under potentially dangerous conditions., • Continuously demonstrate a strong sense of responsibility and ownership by being proactive in all situations/tasks, • Understanding the importance of being a mentor, the ability to invest in the development and success of others, • Superior communication skills, ability to speak to your audience whether it be the office or instructing/training multi-levels of crew, etc., • Strong logistical and mechanical reasoning skills, ability to not only plan and execute voyage, but also have a complete understanding of the vessel (mechanical and movement) Physical Aptitudes • Agility to traverse uneven ground and walk, gangways at various heights, • Agility to bend, stoop, or squat frequently and climb high steps/ladders several times a day, • Ability to lift 40 pounds safely; moving equipment that is heavy, large, or awkward, • Physical dexterity and strength to catch and handle lines; makeup tows with wire rigging; operate deck machinery; work on equipment that is poorly accessible, • Ability to work below decks in an area that may experience periods of darkness; work in confined spaces, • Ability to think clearly during stressful situations or during an emergency, • Ability to perform emergency duties and use emergency equipment onboard the vessel, • Demonstrate good personal hygiene, always maintain cleanliness, • Must be able to swim Engineer I - $450 - $550/day LICENSES & REQUIREMENTS: • TWIC Card, • MMC – OS/Wiper, • CG Med Cert, • Passport PREFERRED LICENSES & REQUIREMENTS: • MMC QMED/Oiler, • Able Seaman Endorsement, • STCW Basic Training VESSEL PROFICIENCIES: • Assistant or sole Engineer on tugs, • Basic knowledge and troubleshooting abilities on electrical, hydraulic, pneumatic, and mechanical systems, • Tow winch operation, • Cleaning and maintaining an engine room to the Curtin Standard COMPLIANCE: • Basic proficiency in operation of Vessel Management System (VMS), • Understanding and compliance with the Curtin Standard, • Thorough recordkeeping and reporting to Port Engineer LEADERSHIP & MANAGEMENT: • Take ownership of assigned vessels. Maintain inventories, work plans, and be proactive in creating requisitions and leaving the vessel cleaner than you found it., • Manage Deckhands (when applicable) on projects and during downtime., • Partner with the Port Engineer and Captain to plan work while underway. Engineer II - $550 - $650/day LICENSES & REQUIREMENTS: • All those listed in Engineer I, • MMC – QMED/Oiler, • STCW Basic Training VESSEL PROFICIENCIES: • Skilled in all Deckhand I – III position duties, • Engineer “signed off” on multiple vessels in the fleet., • “Figuring it out.” With some guidance, Engineer II’s should be able to get on a new boat and figure out the basic engineering systems on board., • Growing understanding and troubleshooting/repair abilities in all vessel systems COMPLIANCE: • Proficient utilization and operation of VMS, • Beginning understanding of Sub-M, ABS, and USCG requirements LEADERSHIP & MANAGEMENT: • Manage teams on vessel projects and hold all accountable for completing tasks and assignments., • Assist Captain in making sure “everyone always has something to do!”, • Lead by example, don’t just say how it should be done. Do it! Engineer III - $650 - $750/day LICENSES & REQUIREMENTS: • All those listed in Engineer I & II, • DDE 1000 PREFERRED LICENSES & REQUIREMENTS: • STCW - RFPEW VESSEL PROFICIENCIES: • Engineer on all vessels in the fleet, including ocean tugs., • “Figuring it out.” Engineer II’s should be able to get on any boat, without prior knowledge or instruction and figuring out how to engineer it., • Thorough understanding and troubleshooting/repair abilities in all vessel systems, • Critical path and proactive planning to maximize efficiency in operations of the engineering of the vessel including maintaining a constant state of readiness. COMPLIANCE: • Full utilization and operation of VMS, • Thorough understanding of Sub-M, ABS, and USCG requirements, • Experience participating in external and internal audits., • Proven track record of performance in the VMS as well as training others in its use and function LEADERSHIP & MANAGEMENT: • Strong management skills as it relates to fellow crew, vendors, and shipyards., • Maintain a constant training ground onboard the vessel for Engineers I & II and Deckhands., • Provide critical and constructive feedback to other crew and on equipment, jobs, etc. Engineer IV - $750-800/day LICENSES & REQUIREMENTS: • All those listed in Engineer I - III, • DDE 4000 PREFERRED LICENSES & REQUIREMENTS: • STCW – RFPEW, AS-Engine VESSEL PROFICIENCIES: • Skilled at a high level in engineering, troubleshooting, and repair of all equipment in the fleet including: tugs, cranes, winches, electrical systems, pumps, auxiliary equipment, gasoline engines, vehicles, etc., • Heavy repair experience including engine overhauls, power pack replacement, etc., • Experience in system installation on new and retrofit applications including repowers, hydraulic, and other plumbing systems., • Commissioning new vessels to the fleet, including creating critical spares lists and standard operating procedures. “Take a dark dead boat with nothing on it and get it ready to work!”, • Basic welding skills COMPLIANCE: • Well versed in completing external and internal audits, as well as participating in building audit criteria to improve the Curtin Standard, • Proven track record of performance in the VMS as well as training others in its use and function. LEADERSHIP & MANAGEMENT: • Experience managing dry-dockings and repairs., • Ability to act as your own project manager. Interacting with and managing vendors, regulatory bodies, shipyards, Curtin Shoreside Team, etc., • Participate in the creation of SOP’s and other training content. Engineer V - $800 - $875/day LICENSES & REQUIREMENTS: • All those listed in Engineer I - IV, • DDE Any HP – 500 Ton PREFERRED LICENSES & REQUIREMENTS: • STCW – RFPEW, AS-Engine, • STCW - OICEW VESSEL PROFICIENCIES: • Skilled at a high level in engineering, troubleshooting, and repair of all equipment in the fleet including: tugs, cranes, winches, electrical systems, pumps, auxiliary equipment, gasoline engines, vehicles, etc., • Heavy repair experience including engine overhauls, power pack replacement, etc., • Experience in system installation on new and retrofit applications including repowers, hydraulic, and other plumbing systems., • Commissioning new vessels to the fleet, including creating critical spares lists and standard operating procedures. “Take a dark dead boat with nothing on it and get it ready to work!”, • Basic welding skills COMPLIANCE: • Well versed in completing external and internal audits, as well as participating in building audit criteria to improve the Curtin Standard, • Proven track record of performance in the VMS as well as training others in its use and function LEADERSHIP & MANAGEMENT: • Experience managing drydockings and repairs., • Ability to act as your own project manager. Interacting with and managing vendors, regulatory bodies, shipyards, Curtin Shoreside Team, etc., • Participate in the creation of SOP’s and other training content. WHAT WE OFFER: • Competitive Compensation, • Generous benefits package including:, • Medical, • Dental, • Vision, • Short-term Disability, • AD&D/Life Insurance, • 401k (with company match), • Additional option to elect incremental Life Insurance for employee and dependents, and choice to elect Health and/or Dependent Flexible Spending Account. Curtin Maritime is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Lead Mechanic Supervisor - Sheet Metal Purpose: Colonna's Shipyard is looking to obtain a Lead Mechanic Supervisor - Sheet Metal to support our shipyard operations in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. Essential Duties and Responsibilities: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc. Additionally, position will: • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them. Qualifications: • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 7 years related trade experience (in the trade to be supervised)., • Must have knowledge of and ability to use hand tools and instruments associated with trade., • Must be able to work effectively with others., • Must be able to comprehend blueprints, sketches, and templates., • Must be able to enter and move through manholes to reach and work in internally confined spaces., • Must have working knowledge of practices, methods, materials, and equipment used in Sheet Metal, Joinery, and HVAC., • Must have regular, reliable attendance. Preferred Skills/Qualifications: • Some previous supervisory/mentoring experience (such as make-up supervisor) Security Requirements: • Must be able to access Government facilities and be DBIDS eligible., • Position requires US Citizenship. Travel Requirements: • Minimal Travel; 10% or less. Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • Must be able ride ships at sea for extended periods., • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee may be required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard, Inc. is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO). Pay Range: $36.77 - $43.26 Determination of base salary considers various factors, including but not limited to scope of responsibility, candidate's relative and specific experience, education level, key skills, as well as other business considerations. The company also provides a variety of benefits to support employees' best health and wellness. Additionally, the company offers a 401k retirement program with match, paid holidays, and competitive paid time off (PTO)

Lead Mechanic Shipfitter (2nd Shift) - Steel America Purpose: Steel America, a business unit of Colonna's Shipyard, is seeking a Lead Mechanic Shipfitter to support 2nd Shift operations at our site in Norfolk, VA. Position will provide hands-on guidance to a small group of tradespeople, working alongside them to support assigned projects under the direction of the Lead Mechanic Supervisor (LMS) or Shop Foreman. The role includes training, mentoring, and ensuring work is completed safely, efficiently, and to the highest quality standards. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. This is a 2nd Shift position. Job Description: Key responsibilities include: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc., • Determine and apply joint and system tolerances., • Install structural outfit items such as doors, ladders, and foundations., • Complete lay outs using drawings and/or templates and/or by picking up and developing the geometry required from the lofting floor., • Physical assembly in prefabrication and erection on the building site of individual structural elements or prefabricated panels and three-dimensional sub-assemblies., • Tack and Fillet weld as needed with stick and semi-automatic welding equipment., • Sequence assembly and fittings and safely use heating torches in plate heat straightening and shrinkage. Additionally, position will: • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them. Qualifications: • Bachelors or Registered Apprentice (grad) or HS + 5 years related trade experience (in the trade to be supervised), • Must have at least 5 years of experience shipfitting, in a marine or shipyard environment; or have graduated from a registered apprenticeship program relevant to the trade., • Must have a strong understanding of ship construction and structural integrity., • Must be able to pass a tack weld test with Flux Core Welding (FCAW) with the ability to Tack Weld as needed in both the vertical and overhead positions., • Must be trained in the NAVSEA Standard Items that are applicable to the fitter trade and demonstrate an advanced understanding of bevels, types of backing rings, consumable inserts (E/B rings), open roots, saddles, miters and tolerances., • Must be able to comprehend blueprints, sketches, and templates and must be able to calculate and understand units of measure, including fractions and decimals. Preferred Qualifications: • Some previous supervisory/mentoring experience (such as make-up supervisor), • Previous technical training highly preferred., • Relevant certifications in shipfitting, welding, or related fields are preferred. Security Requirements: • U.S. Citizenship Required., • Ability to obtain DBIDS preferred. Travel Requirements: • Frequent Travel; 50% or less. Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard, Inc. is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO). Pay Range: $28.46 - $35.99 Determination of base salary considers various factors, including but not limited to scope of responsibility, candidate's relative and specific experience, education level, key skills, as well as other business considerations. The company also provides a variety of benefits to support employees' best health and wellness. Additionally, the company offers a 401k retirement program with match, paid holidays, and competitive paid time off (PTO)

Welder Foreman - Steel America Purpose: Steel America, a division of Colonna's Shipyard, is seeking a Welder Foreman to support operationsat our site in Norfolk, VA. Position Summary: First level on-site supervisory role that assigns, coordinates, trains, and evaluates team of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge to support production in ship repair/industrial fabrication operations. The position is located onsite in Norfolk, VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require limited travel. Essential Duties and Responsibilities: Key responsibilities include: • Manages key activities in the employee lifecycle for all direct reports (timekeeping, job assignments, training, performance management, coaching/counselling, supervision, etc.) and ensure employees have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • Breaks broader production strategies down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc. Additionally, position will: • Provides daily updates to management to support POD development and execution., • Review project specifications/SOWs and order all project materials in accordance with contract requirements and associated references., • Generates and submits production reports, meeting all technical/customer requirements, to management., • Ensure tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Responsible for project's chemist certificate, daily CPs, and hot work permits., • Manages and initiates QA/Customer calls out and attends/executes TIP inspections., • May serve as backup/makeup to General Foreman, as needed. Required Qualifications: • Must have a Bachelors Degree or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding), and FCAW (Flux Core Arc Welding)., • Must have knowledge of AWS D1.1 (Structural Steel) and NAVSEA code/requirements (MIL-STD-1688 & MIL-STD-1689)., • Must have experience in new industrial fabrication/new construction., • Must have at least one (1) year of experience in welding automation., • Must have ability to understand job specifications, drawings, and corresponding technical references., • Must have regular, reliable attendance. Preferred Skills/Qualifications: • Some previous supervisory/mentoring experience (such as make-up supervisor) preferred., • Experience performing visual inspections of welds and fit ups preferred., • Ability to perform GTAW (Gas Tungsten Arc Welding) and SAW (Submerged Arc Welding) preferred., • Experience or certification in welding NDT preferred., • CWI certification preferred. Travel Requirements: • Minimal Travel; 10% or less. Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO). Pay Range: $33.29 - $42.10 Determination of base salary considers various factors, including but not limited to scope of responsibility, candidate's relative and specific experience, education level, key skills, as well as other business considerations. The company also provides a variety of benefits to support employees' best health and wellness. Additionally, the company offers a 401k retirement program with match, paid holidays, and competitive paid time off (PTO)

Dolce & Gabbana Beauty, a globally renowned luxury brand, is seeking a.

Shipfitter Foreman - Steel America\n \n Purpose:\n \n \nSteel America, a division of Colonna's Shipyard, is seeking a Shipfitter Foreman to support operations at our site in Norfolk, VA.\n \n \nThis position supports operations on our 2nd shift. \n \n \n*Relocation support available on a case-by-case basis, up to $5,000.\n \n Position Summary:\n \n \nFirst level on-site supervisory role that assigns, coordinates, trains, and evaluates team of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge to support production in ship repair/industrial fabrication operations.\n \n \nThe position is located onsite in Norfolk, VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require limited travel. \n \n Essential Duties and Responsibilities:\n \n \nKey responsibilities include: \n \n\n • Manages key activities in the employee lifecycle for all direct reports (timekeeping, job assignments, training, performance management, coaching/counselling, supervision, etc.) and ensure employees have all necessary tools, equipment, work procedures, etc. to work safely and efficiently.\n, • Breaks broader production strategies down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites.\n, • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions.\n, • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc.\n\n \nAdditionally, position will: \n \n\n • Provides daily updates to management to support POD development and execution.\n, • Review project specifications/SOWs and order all project materials in accordance with contract requirements and associated references.\n, • Generates and submits production reports, meeting all technical/customer requirements, to management.\n, • Ensure tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment.\n, • Responsible for project's chemist certificate, daily CPs, and hot work permits.\n, • Manages and initiates QA/Customer calls out and attends/executes TIP inspections.\n, • May serve as backup/makeup to General Foreman, as needed.\n\n Required Qualifications:\n \n \n\n • Must have a Bachelor's Degree or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised).\n, • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding) and FCAW (Flux Core Arc Welding).\n, • Must have knowledge of AWS D1.1 (Structural Steel) and NAVSEA code/requirements (MIL-STD-1688 & MIL-STD-1689).\n, • Must have experience in new fabrication/new construction.\n, • Must have ability to understand job specifications, drawings, and corresponding technical references.\n, • Must have regular, reliable attendance.\n\n \n Preferred Skills/Qualifications:\n \n\n • Some previous supervisory/mentoring experience (such as make-up supervisor) preferred.\n\n \n Travel Requirements:\n \n\n • Minimal Travel; 10% or less.\n\n Physical Requirements:\n \n\n • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.\n, • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.\n, • May ride ships at sea for extended periods\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.\n, • Frequent exposure to noise due to machinery and equipment.\n, • Employee is required to operate trucks, forklifts & man-lifts.\n, • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.\n, • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation\n, • Frequent use of respirator.\n, • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n \n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry.\n \n Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. \n \n \nAdditionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).\n \n \nPay Range: $33.29 - $42.10\n \n \nDetermination of base salary considers various factors, including but not limited to scope of responsibility, candidate's relative and specific experience, education level, key skills, as well as other business considerations. The company also provides a variety of benefits to support employees' best health and wellness. Additionally, the company offers a 401k retirement program with match, paid holidays, and competitive paid time off (PTO)

Shipfitter Foreman - Steel America\n \n Purpose:\n \n \nSteel America, a division of Colonna's Shipyard, is seeking a Shipfitter Foreman to support operations at our site in Norfolk, VA.\n \n \nThis position supports operations on our 2nd shift. \n \n \n*Relocation support available on a case-by-case basis, up to $5,000.\n \n Position Summary:\n \n \nFirst level on-site supervisory role that assigns, coordinates, trains, and evaluates team of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge to support production in ship repair/industrial fabrication operations.\n \n \nThe position is located onsite in Norfolk, VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require limited travel. \n \n Essential Duties and Responsibilities:\n \n \nKey responsibilities include: \n \n\n • Manages key activities in the employee lifecycle for all direct reports (timekeeping, job assignments, training, performance management, coaching/counselling, supervision, etc.) and ensure employees have all necessary tools, equipment, work procedures, etc. to work safely and efficiently.\n, • Breaks broader production strategies down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites.\n, • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions.\n, • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc.\n\n \nAdditionally, position will: \n \n\n • Provides daily updates to management to support POD development and execution.\n, • Review project specifications/SOWs and order all project materials in accordance with contract requirements and associated references.\n, • Generates and submits production reports, meeting all technical/customer requirements, to management.\n, • Ensure tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment.\n, • Responsible for project's chemist certificate, daily CPs, and hot work permits.\n, • Manages and initiates QA/Customer calls out and attends/executes TIP inspections.\n, • May serve as backup/makeup to General Foreman, as needed.\n\n Required Qualifications:\n \n \n\n • Must have a Bachelor's Degree or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised).\n, • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding) and FCAW (Flux Core Arc Welding).\n, • Must have knowledge of AWS D1.1 (Structural Steel) and NAVSEA code/requirements (MIL-STD-1688 & MIL-STD-1689).\n, • Must have experience in new fabrication/new construction.\n, • Must have ability to understand job specifications, drawings, and corresponding technical references.\n, • Must have regular, reliable attendance.\n\n \n Preferred Skills/Qualifications:\n \n\n • Some previous supervisory/mentoring experience (such as make-up supervisor) preferred.\n\n \n Travel Requirements:\n \n\n • Minimal Travel; 10% or less.\n\n Physical Requirements:\n \n\n • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.\n, • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.\n, • May ride ships at sea for extended periods\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.\n, • Frequent exposure to noise due to machinery and equipment.\n, • Employee is required to operate trucks, forklifts & man-lifts.\n, • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.\n, • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation\n, • Frequent use of respirator.\n, • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n \n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry.\n \n Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. \n \n \nAdditionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).\n \n \nPay Range: $33.29 - $42.10\n \n \nDetermination of base salary considers various factors, including but not limited to scope of responsibility, candidate's relative and specific experience, education level, key skills, as well as other business considerations. The company also provides a variety of benefits to support employees' best health and wellness. Additionally, the company offers a 401k retirement program with match, paid holidays, and competitive paid time off (PTO)

Steel America, a division of Colonna's Shipyard, is seeking a Shipfitter Foreman to support operations at our site in Norfolk, VA. This position supports operations on our 2nd shift. Relocation support available on a case-by-case basis, up to $5,000. Position Summary: First level on-site supervisory role that assigns, coordinates, trains, and evaluates team of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge to support production in ship repair/industrial fabrication operations. The position is located onsite in Norfolk, VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require limited travel. Essential Duties and Responsibilities: • Manages key activities in the employee lifecycle for all direct reports (timekeeping, job assignments, training, performance management, coaching/counselling, supervision, etc.) and ensure employees have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • Breaks broader production strategies down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc. Additionally, position will: • Provides daily updates to management to support POD development and execution., • Review project specifications/SOWs and order all project materials in accordance with contract requirements and associated references., • Generates and submits production reports, meeting all technical/customer requirements, to management., • Ensure tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Responsible for project's chemist certificate, daily CPs, and hot work permits., • Manages and initiates QA/Customer calls out and attends/executes TIP inspections., • May serve as backup/makeup to General Foreman, as needed. Required Qualifications: • Must have a Bachelor's Degree or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding) and FCAW (Flux Core Arc Welding)., • Must have knowledge of AWS D1.1 (Structural Steel) and NAVSEA code/requirements (MIL-STD-1688 & MIL-STD-1689)., • Must have experience in new fabrication/new construction., • Must have ability to understand job specifications, drawings, and corresponding technical references., • Must have regular, reliable attendance. Preferred Skills/Qualifications: • Some previous supervisory/mentoring experience (such as make-up supervisor) preferred. Travel Requirements: • Minimal Travel; 10% or less. Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. Respect, Pride, Truth, Family These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO). Pay Range: $33.29 - $42.10 Determination of base salary considers various factors, including but not limited to scope of responsibility, candidate's relative and specific experience, education level, key skills, as well as other business considerations.

Lead Mechanic Rigger - Steel America Purpose: Steel America, a business unit of Colonna's Shipyard, is seeking a Lead Mechanic Rigger to support operations at our site in Norfolk, VA. Position will provide hands-on guidance to a small group of tradespeople, working alongside them to support assigned projects under the direction of the Lead Mechanic Supervisor (LMS) or Shop Foreman. The role includes training, mentoring, and ensuring work is completed safely, efficiently, and to the highest quality standards. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Job Description: Key responsibilities include: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc. Additionally, position will: • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them. Qualifications: • Bachelors or Registered Apprentice (grad) or HS + 5 years related trade experience (in the trade to be supervised), • Must have experience in one or more of the following required: operation of overhead cranes, operation of mobile cranes, and/or operations of heavy mobile equipment (ie. forklifts, combilifts, telescope handlers, electric boat trailers, shipyard transporters, and hustlers)., • Must have experience with crane signal skills, safe rigging practices, setting gangways and platforms, staging erection inspections, ships mooring, material handling, calculating center of gravity, wire size and application, nylon size and application, shackle size and application, chain size and application, chain falls and application, beam clamp type and size, antenna removal and installation, deck machinery and installation, plate and structure installation, cranes/Davits/booms install, fendering removal and installation, hatch and door removal and installation, towing bridles removal and installation, cargo valves, hoses removal and installation, and cargo handling equipment., • Must possess working knowledge of weight testing IAW specified Tech manuals for equipment such as Cranes, Davits, Winches, Anchors, and anchor chains, etc... within safety guidelines., • Ability to understand job specifications, drawings, and corresponding technical references., • Regular, reliable attendance Preferred Qualifications: • Some previous supervisory/mentoring experience (such as make-up supervisor), • Experience performing successful crane and rigging operations within a shipyard environment highly preferred., • Prefer knowledge and experience with underwater hull rigging of shafting, propellers, rudders, etc. Security Requirements: • U.S. Citizenship Required., • Ability to obtain DBIDS preferred. Travel Requirements: • Frequent Travel; 50% or less. Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard, Inc. is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO). Pay Range: $28.46 - $35.99 Determination of base salary considers various factors, including but not limited to scope of responsibility, candidate's relative and specific experience, education level, key skills, as well as other business considerations. The company also provides a variety of benefits to support employees' best health and wellness. Additionally, the company offers a 401k retirement program with match, paid holidays, and competitive paid time off (PTO)

Colonna's Shipyard is looking to obtain a Lead Mechanic Supervisor - Sheet Metal to support our shipyard operations in Norfolk, VA. Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. Essential Duties and Responsibilities: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc. Additionally, position will: • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them. Qualifications: • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 7 years related trade experience (in the trade to be supervised)., • Must have knowledge of and ability to use hand tools and instruments associated with trade., • Must be able to work effectively with others., • Must be able to comprehend blueprints, sketches, and templates., • Must be able to enter and move through manholes to reach and work in internally confined spaces., • Must have working knowledge of practices, methods, materials, and equipment used in Sheet Metal, Joinery, and HVAC., • Must have regular, reliable attendance. Preferred Skills/Qualifications: • Some previous supervisory/mentoring experience (such as make-up supervisor) Security Requirements: • Must be able to access Government facilities and be DBIDS eligible., • Position requires US Citizenship. Travel Requirements: • Minimal Travel; 10% or less. Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • Must be able ride ships at sea for extended periods., • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee may be required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. Respect, Pride, Truth, Family These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard, Inc. is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO). Pay Range: $ 36.77 - $43.26 Determination of base salary considers various factors, including but not limited to scope of responsibility, candidate's relative and specific experience, education level, key skills, as well as other business considerations.

Remote Bilingual (Spanish) Sales - Healthcare Appointment Scheduling.Supplement your income with flexible hours.If you're Bilingual (Spanish / English), have a talent for sales, and are looking for a fast-paced, flexible gig, consider a new Spanish bilingual healthcare program on the Arise® Platfor

A place to share your ideas freely — even if they’re daring or different.Where the true you can learn, grow, and thrive.At Verizon, we power and empower how people live, work and play by connecting them to what brings them joy.We do what we love — driving innovation, creativity, and impact in

Flynn Hut joined the Pizza Hut system in 2021.In 2023, we expanded internationally acquiring Pizza Hut's master franchisee in Australia with 260+ units.Today we are the largest Pizza Hut franchisee in the world with 1200+ locations and are operating in 2 Countries.We continue to grow by building new

Sales Representative | Remote | PT or FT Career Opportunity.Performance-Based | Daily Pay | Full Training Provided.Candidates Must Reside in the U.The Weiner Group is committed to helping individuals and families protect what matters most through simplified issue life insurance solutions that includ

Our secret to leading the way in hospitality? We put our people first!.At Shake Shack, our mission is to Stand For Something Good in all that we do.From our teams to our neighborhoods, we're committed to always doing the right thing.As one of the fastest-growing hospitality brands, we're all about c

LOMENICK is seeking a driven and passionate leader to join our team.With over 120 years of industry leadership, we specialize in providing top-tier business solutions.This role involves servicing an existing portfolio of 2,000 business clients, developing new relationships through referrals and lead

Sales Representative: Cardiac Electrophysiology (EP).We are seeking a high-performing, field-based Sales Representative who will be responsible for acquiring new business and capturing market share within a regional territory.The ideal candidate has a proven track record in medical device sales, a r

Job Title: OUTSIDE SALES REPRESENTATIVE – VERTICAL MARKETS.Location: Jacksonville, FL (remote with travel).Advantage Sport & Fitness, Inc.ASF), headquartered in Ithaca, NY, provides premium fitness equipment and customized fitness space design solutions for commercial facilities across the East Co

Territory Representative - Tennessee, KY, Alabama.You are also a true Boplan Ambassador and culture carrier, both externally and internally.In addition to your own individual performance, this means you will also support team members whenever possible.You will be responsible for both the development

VOLUX Lighting, a division of Dynamic Visual Solutions, is the newest and fastest-growing stage lighting manufacturer providing valuable, innovative intelligent lighting solutions for a wide variety of entertainment and commercial markets.Volux Lighting brand throughout the industry while aligning w

Auris is the payroll and HR partner built for small and medium-sized businesses who can’t afford to get it wrong.Trusted by over 50,000 businesses nationwide, Auris pairs easy-to-use technology with real human services to give leaders the confidence that every detail is done right - so they can fo

Are you looking for a flexible opportunity to build a rewarding career in sales while working remotely? We are currently seeking motivated and customer-focused individuals to join our team as a Remote Sales Representative.Whether you are beginning your career journey or looking to expand your experi

Sell in aesthetics? This peptide line is built for repeat orders and recurring income.Reps run this alongside their current role or full-time.We’re partnered with a rapidly growing company focused on peptide-based therapies, expanding its national sales team.This is a unique opportunity to sell a

Our client is building a significantly larger national sales presence and is looking for an established field sales professional who can make an immediate commercial impact.This is not an entry point into the industry.It is an opportunity for a proven relationship builder to leverage an existing net

Multiple US regions (flexible based on candidate location).TERMINAX is a leading brand in high-performance automotive films, recognized for its innovation in Paint Protection Film (PPF).Built on advanced technology, precision engineering, and decades of research in both R&D and manufacturing, TERMIN

Rudiment Medicine is redefining skin health through precision skincare technology.AI, biomarker science, and aesthetics.Rudiment Medicine is seeking highly motivated, entrepreneurial.We strongly prefer candidates with experience in the aesthetics industry, including:.Licensed aestheticians and medic

GoodEarth Distribution, a national distributor of operational and facilities supplies, is looking for an experienced sales representative who will be well compensated for growing client relationships.We excel in nationwide logistics, cost-effective solutions, and sustainability; we are a true "One-

For one of our clients, we are looking for a Business Development Manager to take ownership of a territory and drive the full sales cycle, from outbound prospecting and discovery through remote product demonstrations, closing, and account expansion.The role focuses on selling technical solutions to

Orthopedic Sales Representative – GLP-1 / RPM Program.Orthopedics, Healthcare, Remote Patient Monitoring, Medical Weight Loss.OptiBMIze is building a specialized metabolic health and surgical optimization program designed specifically for orthopedic practices.We help surgeons improve patient outco

Zuma Nutrition makes whole-plant herbal supplements built around protocols: targeted cleanses that start a customer's journey and daily formulas that carry it forward.More than 120 independent health food stores, co-ops and practitioners carry our line, and many have grown into full-line partners wh

Compensation Includes - Base plus uncapped commission, a $3000 Sign on Bonus, and a guarantee on commission for the first 90 day !!.First American Home Warranty, a member of the First American family of companies, helps homeowners protect what matters most—their homes.We provide home warranty solu

K+ Annual Earning Potential | Uncapped Commissions | Lifetime Residual Income.PureMed Script is a rapidly expanding pharmaceutical technology company connecting medical clinics, healthcare providers, and pharmacy partners through an integrated prescription management and ordering platform.We are see

K and $10M in enterprise value.Our team handles all the legwork - finding, vetting, negotiating, and funding deals, and supporting clients through closing.We're in the process of massive growth and right now have more leads than we know what to do with.The bottleneck is not lead flow.We need sales p

The strongest candidate for this role brings together three capabilities that are rarely found in one person:.Club Industry Knowledge + Technology Credibility.We recognize that very few candidates will be equally strong in all three areas.We are therefore interested in people who are exceptional in

Looking for a career change where your income follows your effort and your schedule is your own? The Cooper Group is growing and looking for people from other industries who are ready to build something for themselves.We want people who are coachable, self-motivated, and good with people.You'll work

Company Description Life Line Foods is a long-established liquid dietary supplement company that has been active in the health food industry since 1969.Its nutraceutical division, Buried Treasure, founded in 1996, specializes in liquid vitamins, minerals, and specialty nutrient formulas.The company

Oldcastle, a CRH company, is reinventing what's possible in building solutions.We are the leading provider of innovative outdoor living products and utility infrastructure solutions for the water, energy, and communications markets throughout North America.We're a trusted and strategic partner to en

Independent Sales Representative (1099) – Medical Aesthetics.Commission-Based | Flexible / Multi-Line | Multiple Territory.Wontech USA brings Korean-engineered medical aesthetic technology to dermatologists, plastic surgeons, and medical spas throughout the United States.KOSDAQ, and distributing p

IT’S TIME TO GROW YOUR CAREER!.Chemsearch FE, A Solenis Company, offers a career destination for talented, passionate and results-driven people who seek the innovation and growth opportunity that we provide.We are a facility resource management company with over 100 years of experience.Chemsearch

Ervin Industries is seeking an autonomous, highly motivated Territory Sales Representative to drive growth across Kentucky, southern West Virginia, and part of the Ohio & Indiana South border area.In this field-based position, you will be responsible for maintaining & expanding Ervin’s footprint i

Thermo Sensors Corporation is seeking an experienced, highly motivated Outside Sales Representative to drive revenue growth and expand market presence throughout Southeast Texas.This individual will be responsible for developing new business opportunities, strengthening relationships with existing c

Equip Payment Solutions is an independent sales company working in the point of sale & credit card processing space.We have reps in 19 states and counting.As we continue to expand throughout the US, we're looking for the best of the best sales reps to add to our team!.At Equip, we’re raising up l

Hospitality, LLC helps restaurants, food & beverage venues, hospitality, entertainment, and other businesses identify technology and business solutions designed to increase revenue, reduce costs, improve operational efficiency, and enhance the customer experience.Through a network of trusted technol

Go Powertrain is a leading distributor of quality powertrain parts serving dealerships and repair facilities.The company specializes in remanufactured and high-quality used engines, transmissions, differentials, transfer cases, steering components, and more.Go Powertrain is known for industry-leadin