Part time office jobs in Everett, Washington - Page 3Create job alerts

Summary You will serve as a MARINE MACHINERY MECHANIC SUPERVISOR I in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will direct personnel in troubleshooting, repairing, overhauling, and installing marine engines and other equipment, such as propulsion machinery auxiliary generators, pumps, compressor, and fire fighting machinery on vessels.\n, • You will coordinate with contractor technical representative personnel when assigned to perform troubleshooting, analysis, and/or repairs.\n, • You will provide direction to workers by assigning the immediate tasks to be performed by individual members of the group; ensuring proper work methods; and seeing to it that needed plans, blueprints, materials, and tools are available.\n, • You will determine performance of a satisfactory amount and quality of work and review products for acceptability.\n, • You will actively support and promote all aspects of the Equal Employment Opportunity (EEO) Program.\n, • You will check work in progress and when finished to ensure instructions on work sequence, procedures, methods, and deadlines have been met.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a PIPEFITTER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Pipe Shop (Shop 56). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will serve as an Expert Pipefitter leading a group to ensure work assignments are completed.\n, • You will install, modify, fabricate, and repair new and existing shipboard system piping and equipment including low and high pressure air, water, and steam systems.\n, • You will mentor, train and instruct Pipe Shop employees in a wide range of pipefitting duties.\n, • You will inspect completed and in progress work for quality of workmanship and adherence to requirements, specifications, standards, plans, and schedules.\n, • You will perform maintenance, repairs, troubleshooting, installation, modification and testing in the shop and onboard ships.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may require work in confined spaces.\n, • This position requires rotating shift work.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a RIGGING WORKER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will work with Riggers in dry docking and launching operations.\n, • You will direct operations of cranes and similar equipment capacities using standard signals.\n, • You will determine the placement of gear to assure loads are secure and balanced.\n, • You will perform spot checks to assure established rigging methods and safety practices are being followed.\n, • You will utilize protective equipment and clothing for work assignments.\n, • You will demonstrate proficient knowledge of rigging to assist Journeymen Riggers, or lead lesser skilled workers, in installation, removal, and repositioning of machinery, structural members of ships or buildings, heavy equipment or other loads.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job details Domain Performance and Support Job field / Job profile Industrial engineering - Additive manufacturing engineering Job title Manufacturing Engineering Manager Employment type Permanent Professional category Professional, Engineer & Manager Part time / Full time Full-time Job description Job Summary: The Manufacturing Manager will be responsible for facilitating visual management & flow in Manufacturing, and, Materials areas. This role will also support facility-wide flow and product family future state development / implementation. The role will also support lean vision, training, and communication throughout division. Summary of Duties: • Establishes detail planning of manufacturing sequences and furnishes detail operating instructions to production personnel., • Plans logical approach to complex manufacturing problems and their solutions., • Implement/enforce company manufacturing processes and policies., • Analyzes engineering design documents, prototypes and or engineering change orders and determines what equipment, tooling, materials, method of manufacture and facilities are required to produce a particular product in scheduled quantities and that the lowest cost consistent within quality specifications., • Performs and documents make/or buy decisions, • Works concurrently with designers to recommend the best product configuration for lowest mfg cost, • Creates process plans for manufacture or procurement of parts and assemblies, • Creates tools, fixtures and methods to reduce cycle time of manufactured or procured parts or assemblies, • Specifies appropriate tools and fixtures for the manufacturing task, • Recommends new or improved cutting tools, • Recommends improved manufacturing processes or methods, • Evaluates and resolves design related production problems, • Perform other duties and responsibilities as assigned by management Candidate skills & requirements Qualifications: Education: Bachelors degree (BS) in Engineering, Manufacturing, or an equivalent combination of education and (10) years experience which has provided both theoretical and practical knowledge in the field. Experience: Demonstrated ability to perform the essential functions of the job typically acquired through (6) or more years of increasingly responsible experience that included utilizing continuous improvement principles (i.e. lean manufacturing), total quality and problem solving tools. Minimum 3 years of management experience in a technical field. Preferred: Minimum (5) years of Managing experience in a technical field Computer Skill: • Read and analyze reports and drawings., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plain and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public., • Demonstrated ability to handle multiple projects and assignments with attention to detail, • Problem solving, well organized, detailed oriented and accurate. Annual salary USD $103,120 - $162,040 Annually Job location Job location North America, United States, Washington City (-ies) 12810 State Ave Marysville, WA 98271 Applicant criteria Minimum education level achieved Bachelor's Degree Minimum experience level required More than 8 years Additional Languages preferred English (Fluent) ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency Yes

Manufacturing Technician I BLR Aerospace, LLC, a Ducommun Incorporatedcompany, has an immediate opening for Manufacturing Technician I. This is a full-time, on-siteposition for a candidate with relevant production experience, preferably inaerospace or a technical field. BLR is seeking to recruit a ManufacturingTechnician I in the Metro Everett/Seattle, WA area. This is a full-timerole for on-site work performed in our Everett, WA facility. The ideal candidate will have 3-5years of relevant production experience in aerospace structural assembly. Thecandidate must possess the skills and ability to set up, operate, and maintainhandheld manufacturing equipment. Knowledge of and experience with thin sheetmetal assemblies is required. The ability to follow as well as develop anddocument assembly processes and techniques is required. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, producing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications. Our Facility in Everett, WA is located at 11002 29th Ave. W Bldg C19, Everett WA 98204. Why Ducommun? • Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces, • Clean and climate controlled working environment, • Opportunity for career growth, • Responsible for accuracy, competency and efficiency when conducting tasks related to work area.\n, • Follow Work Instructions and processes to ensure assembled parts meet the company's FAA-approved Quality Management System.\n, • Required and accountable for performing quality checks, audits and inspections, and is for the quality of any finished product, subassembly and/or installed components.\n, • Document production operations in corresponding records and/or log sheets in accordance with work instructions.\n, • Regularly perform routine cleaning and maintenance procedures for equipment and the manufacturing area.\n, • Actively participate in the continuous improvement of plant operations by supporting LEAN and continuous improvement initiatives.\n, • Adhere to established workmanship standards, policies and practices relating to quality, cost reduction, safety, and ergonomics during performance of assigned duties\n, • Assist with developing and implementing new production methods for continuous improvement.\n, • Maintain a clean, organized and safe environment throughout the facility.\n, • Follow corporate-mandated Environmental, Health and Safety (EHS) protocols, and report all injuries and/or near misses to supervisor immediately.\n\n Required Skills and Qualifications \n • High attention to detail and experience with inventory management\n, • Accuracy in part selection\n, • Thin Sheet Metal working experience, such as Drilling, Riveting, Trimming/Cutting, Countersinking, Dimpling and Assembly\n, • Capable of standing for extended periods\n, • Ability to occasionally lift upwards of 50 lbs. consistently\n, • Experience working in a manufacturing type of environment\n, • Self-starter requiring limited supervision, and able to perform job assignments with a very high degree of accuracy\n, • Excellent interpersonal skills\n, • A quality-focused approach to producing accurate work\n, • H.S. Diploma or GED\n, • 8 hour shifts\n, • Core hours: Monday - Friday 7:00am - 4:00pm\n, • On-site warehouse/shop and office environment\n, • Standard lunch and break periods\n, • Environmentally controlled work area\n, • Eye and ear protection is provided\n\n Equal Opportunity EmployerVeterans/Disabled 11002 29th Ave W, Bldg C-19 Everett, Washington, 98204 United States

Job details Domain Production Job field / Job profile Quality - Operations quality assurance Job title Quality Inspector 2 - SCI Employment type Permanent Professional category Technician Part time / Full time Full-time Job description Performs first article inspection (FAI) of newly designed or revised products. • Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order. In-process inspection of parts being manufactured., • Inspects sub-assemblies used in the construction of aircraft interiors and all final products prior to shipment., • Interprets and reads engineering drawings, company and customer specifications to ensure accurate part manufacturing. But what else? (advantages, specificities, etc.) Safran Cabin headquarters are in Huntington Beach, California, with a global presence of over 10,000 employees at 39 sites. Site locations are in the United States, Mexico, Brazil, Canada, Germany, France, Czech Republic, the Netherlands, Tunisia and Thailand. Safran Cabin serves over 400 airlines and leasing companies globally and delivers to all airframe OEM manufacturers with a heritage spanning over 80 years in the industry. Safran's Corporate Social Responsibility (CSR) goes beyond our facility walls. We value and support the communities where we live and work. One of Safran's values and CSR pillar is Corporate Citizenship that helps drive economic, social and cultural progress by sharing our gifts with those around us. • Your Career: Safran is committed to providing internal mobility to our employees. We operate globally so the sky is the limit of where your Safran journey can take you., • Your Development: Safran employees have free access to Safran University courses and external tuition reimbursement for approved programs or certifications., • Your Benefits: Our suite of comprehensive benefits include health care (medical, dental and vision), life insurance, 401(k) savings plans with company match, paid time off, Safran Perks with BenefitHub - Employee Discounts & Rewards Marketplace for consumer products/services and more! Candidate skills & requirements Education: High school diploma or equivalent. Experience: 4-7 years. Computer Skill: Familiar with Windows Operating System®. Basic skills with Microsoft office systems. Other Skills: Must possess ability to use precision measuring instruments. Ability to read engineering drawings, specifications and other technical literature is preferred. Ability to effectively use inspection tools such as calipers, micrometers, tape measures, etc. Identify problems with some solving capabilities. Annual salary USD $18.90 - $29.70 Hourly Job location Job location North America, United States, Washington City (-ies) 12810 State Ave Marysville, WA 98271 Applicant criteria Minimum education level achieved High School Diploma/GED Equivalent Minimum experience level required More than 3 years Additional Languages preferred English (Fluent) ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency Yes

Summary You will serve as a RIGGER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will provide technical trade leadership to a small working group.\n, • You will ensure necessary materials are available, and tools and equipment are in good, safe operational condition to accomplish work.\n, • You will recommend specific task assignments for each member of the work crew.\n, • You will instruct subordinates on any unusual work steps or requirements, including the safe operation of equipment.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. Vacancies filled from this announcement may be filled at any grade level listed. If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Date Posted: 2026-03-10 Country: United States of America Location: US-WA-EVERETT-2701 ~ 2701 94th St ~ SNOHOMISH AIRPORT Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance Type: None/Not Required Security Clearance Status: Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. We are seeking a Mechanic at our Everett, WA location to meet growth demands at our facility. The role involves performing major and minor assembly of landing gear components in a timely manner with a focus on quality. What You Will Do \n • Major and minor assembly of landing gear components, assemblies and sub-assemblies, assisted as required.\n, • Mentor Apprentice Mechanics to ensure proper training on gear build, BAC specifications and any other job responsibilities. \n, • Remain certified in all applicable BAC specifications in order to remain a Mechanic.\n, • Read and interpret manufacturing blueprints and other pertinent documents used for assembly of landing gear (i.e. mfg. specifications, quality documentation etc.).\n, • Interface with engineering, planning, inspection and customer in a professional manner.\n, • Assume the responsibility of completing the work assigned in a quality and timely manner.\n, • Work with precision tools.\n, • Comply with shelf-life procedures.\n, • Maintain a clean and professional work area and participate in daily cleaning procedures.\n, • Comply with hazardous material disposal procedures.\n, • Comply with and demonstrate safety policies and procedures.\n, • Perform other duties as required to achieve team goals. \n\n Qualifications You Must Have \n • Typically requires a HS Diploma or a GED\n, • 2 or more years of mechanical/assembly experience.\n\n Learn More & Apply Now! Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary for this role is $30 an hour, however, Collins Aerospace considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Summary You will serve as a ELECTRICIAN LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will determine placement of electrical distribution panels and other equipment.\n, • You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard environment.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will operate power tools (e.g., pipe benders, cutters, power drills) to cut, bend, fit, and thread components of electrical equipment and systems.\n, • You will use hand tools and test equipment to check alignment, output, or resistance to ground and other electrical characteristics.\n, • You will diagnose faulty electrical equipment or systems to determine rework or replacement of faulty components on nuclear ships alterations and repairs.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a MACHINIST SUPERVISOR I in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will use of various types of conventional and/or computer numerical control (CNC) machine tools and their attachments to perform machining operations in the repair and/or manufacture of parts from raw stock.\n, • You will determine work procedures, machine, tools, equipment, and attachments to be used; proper type and size of raw stock, sequence of matching operations, and the speeds and feeds necessary to attain the required finishes and tolerances.\n, • You will work from blueprints, sketches, work orders, models of parts to be made, or other specifications.\n, • You will determine which machine tool and/or attachments to used for each operation to be performed on each machine and make new job setups on different types of equipment involving accurate alignment in order to maintain specified tolerances.\n, • You will establish dimensions, chasing threads or machining angular surfaces; locating and marking surfaces and angles, locating reference points, or other layout work necessary to facilitate job setups on conventional or CNC machine tools.\n, • You will use conventional machine tools and their attachments to perform machining processes requiring special adaption of the equipment or processes for which they were not specifically designed.\n, • You will, through the use of special or improvised tools, fixtures, and setups to machine unusual surface configurations, use machine tools and attachments on curved surfaces requiring machine feeds in different planes simultaneously.\n, • You will produce the desired cuts and finishes on various metals and other materials such as aluminum, brass, bronze, high carbon and alloy steels, chrome, nickel, titanium, molybdenum, super alloys, nylon, rubber, plastics, teflon, etc.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a MARINE MACHINERY MECHANIC LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will apply a variety of methods, procedures, and techniques to layout, install, align, overhaul, repair, and maintain numerous types of marine machinery, equipment, and systems.\n, • You will utilize and apply standard formulas, shop mathematics, trade theories, and industry practices in calculating needed materials and problem solving.\n, • You will utilize various test equipment and measuring devices such as alignment scopes, verniers, micrometers, precision levels, transits, strobe tachometers, bearing bridge gauges, flow meters, hydrostatic testers, and vibration analyzers.\n, • You will set up and operate machine tools such as small lathes, milling machines, drill presses, and precision grinders to manufacture component parts or remachine existing parts such as bushings, bearings, seals, couplings, and pistons.\n, • You will utilize machine tools for onsite milling, grinding, boring, facing, and drilling, and the use of various other portable machine tools to accomplish repairs.\n, • You will disassemble, repair, and rebuild components and assemblies such as shafts, propellers, rudders, engines, and sea valves.\n, • You will operate machinery and equipment for launching and arresting gear systems, missile handling and launch systems, torpedo tubes, periscopes, antennas, sonar, and radar equipment, and shipboard equipment.\n, • You will interpret and apply the requirements contained in technical manuals, shop directives, multiview blueprints, and other documents in determining critical dimensions and key reference points.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a Combined Trades Supervisor II in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will plan overall work assignments on an immediate and long-range basis in accordance with established schedule requirements.\n, • You will ensure plans, blueprints, materials, and tools are available, and needed stock is obtained from supply locations.\n, • You will control the work of the lead shops and coordinating the work of the miscellaneous trades that are assigned work within the zone.\n, • You will participate in combined nuclear and non-nuclear long-range planning efforts and scheduling development.\n, • You will establish, assign, and explain work requirements to subordinate supervisors, setting deadlines, priorities, and sequences to be followed for work operations.\n, • You will identify training and qualification needs of subordinates; effects on-the-job training, recommending personnel actions, and enforcing disciplinary actions.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO SUPERVISE THROUGH SUBORDINATE SUPERVISORS. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Referral lists will be issued on an as-needed basis as vacancies occur. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a SHIPFITTER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will lay out shell, deck and bulkhead plates, I-beams, channels, angles, pipe and round bar and various other structural shapes, gun rings, struts, framing and various foundation structures and other parts from blueprints and templates.\n, • You will cut and shape plates, beams and other heavy metal structural shapes, using various shop machinery.\n, • You will use precision tooling such as micrometers, feeler gauges and torque wrenches for meeting required tolerances per technical work documents when required.\n, • You will report to supervisors on the status and progress of work, nature of work delays and answer questions on overall work operations and problems.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to obtain and maintain a current valid United States driver's license.\n, • You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • You will be required to obtain and maintain a U.S. Passport.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n, • This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.\n, • This position may require rotating shift work.\n, • This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a PIPEFITTER LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will pass on instructions received from supervisors and get work started.\n, • You will work with other workers and set the pace.\n, • You will ensure plans, blueprints, materials, and tools are available, and needed stock is obtained from supply locations.\n, • You will maintain a current knowledge and answer questions of other workers on procedures, policies, written instructions and other directives.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Date Posted: 2026-04-27 Country: United States of America Location: US-WA-EVERETT-11404 11404 Commando Rd COMMANDO Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here: Security Clearance Type: None/Not Required Security Clearance Status: Not Required The Mechanical Assembler I performs a wide variety of mechanical production sub-assembly and assembly operations of a semi-skilled nature to build up and assemble difficult and complex units. What You Will Do: \n • Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operations sheets, wire lists, samples, blue prints, schematics and verbal instructions to perform a wide variety of assembly operations.\n, • Utilizes small hand tools such as soldering irons, wire strippers, crimpers, wrenches, screwdrivers, pliers, and hammers.\n, • Identifies and selects components to be integrated into sub-assembly and assembly units.\n, • Makes own set-ups, alignments and adjustments maintaining tolerance in accordance with instructions.\n, • Disassembles, modifies, reworks, refurbishes, reassembles, and tests units as required.\n, • May provide work leadership to lower level assemblers through assignment or work review of progress and monitoring of results.\n, • Identify and properly use aviation assembly tools.\n, • Read and comprehend drawings and schematics.\n\n Qualifications you must have: • Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline\n Physical Requirements: \n • Ability to work in cramped spaces, often working on knees, lying down, or crawling.\n, • Ability to stand for long periods of time.\n, • Adhere to all safety protocols and procedures to ensure a safe working environment.\n, • Follow regulatory and company standards in the assembly process.\n\n Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. What we offer: Some of our competitive benefits package includes: \n • Medical, dental, and vision insurance\n, • Three weeks of vacation for newly hired employees\n, • Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option\n, • Tuition reimbursement program\n, • Student Loan Repayment Program\n, • Life insurance and disability coverage\n, • Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection\n, • Birth, adoption, parental leave benefits\n, • Ovia Health, fertility, and family planning\n, • Adoption Assistance\n, • Autism Benefit\n, • Employee Assistance Plan, including up to 10 free counseling sessions\n, • Healthy You Incentives, wellness rewards program\n, • Doctor on Demand, virtual doctor visits\n, • Bright Horizons, child and elder care services\n, • Teladoc Medical Experts, second opinion program\n, • And more!\n\n At Collins Aerospace, our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services, we're helping airlines and original equipment manufacturers create a positive experience for their customers. With offices and manufacturing facilities in more than 12 states across the U.S. and more than 10 countries around the globe, we're changing the game of aircraft interiors. Are you ready to join our team? Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Why Join Us? \n • Impactful Work: Your role directly influences the safety and performance of our aircraft cargo systems, making a tangible impact on the industry.\n, • Growth Opportunities: We offer continuous learning and development opportunities, supporting your career advancement within the company.\n, • Collaborative Environment: Join a team that values collaboration, innovation, and excellence. We foster a culture of support and continuous improvement.\n, • Innovative Culture: Be part of a forward-thinking company that is at the forefront of the aerospace industry, constantly striving for innovation and excellence.\n\n The hourly range for this role is $20.23 to $33.11; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. If you are passionate about quality, have an eye for detail, and are eager to contribute to a dynamic team, we would love to hear from you. Apply now and take the next step in your career with us! As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Summary You will serve as a RIGGER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will direct the operation of cranes and similar equipment and direct laborers and helpers.\n, • You will fabricate, install, and repair standing and running rigging and wire cable or fiber rope articles, such as slings, towing bridles, nets, rope ladders, and other ship and boat rigging and weight handling gear.\n, • You will assist in ship docking operations by laying out and handling lines and tackle, snubbing lines on cleats or bollards, hauling on lines with capstans, and performing similar duties.\n, • You will install beam clamps, gin poles, gallows frames, and other supporting structures; and use jacks, pulley blocks, chain falls, rollers, and similar equipment as necessary to move and position heavy items.\n, • You will perform and direct the placement, removal, or re-positioning of machinery, structural members of ships or buildings, heavy equipment, or other loads.\n, • You will estimate the size, weight, equipment capacity, and plans for clearance and safety factors.\n, • You will guide and direct apprentices and helpers in proper and safe rigging practices.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK WITHOUT MORE THAN NORMAL SUPERVISION. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job details Domain Production Job field / Job profile Quality - development quality assurance (design / industrial engineering / tools/ support and services) Job title Quality Inspector 2 Employment type Permanent Professional category Employees / Staff Part time / Full time Full-time Job description Northwest Aerospace Technologies ("NAT"), a Safran Company, is the only EASA DOA Certified aircraft interior reconfiguration group in the United States. Focusing on commercial and military aircrafts, NAT provides first class services in design, engineering, quality, certification, and manufacturing for a variety of Blue Chip customers. POWERED BY TEAMWORK. Are you ready to be part of a team that drives big ideas and even bigger wins? At Safran, we believe in the power of both collaboration and individual contributions. We understand that it takes diverse perspectives, problem-solving skills, dependability, and trust to push each other forward and achieve great success. For us, working here is more than just a job; it's a passion. There's the unique opportunity to lead the way in aerospace and defense and contribute to creating a safer and more sustainable world. We trust our employees to bring bold ideas to build the future of aerospace together, contributing to our ranking by TIME as the leading Aerospace & Defense company on the 2023 World's Best Companies list (#59 on the full list). Join our team and become part of the group that's making amazing things happen on the ground and in the skies. Together, we'll proudly step back and say, "We did that". Job Summary: Inspects, audits and reports on materials, processes and products used in the construction of aircraft interiors using variable or attribute measuring instruments and techniques to ensure conformance with the company's quality standards. This job reports to the Quality Inspection Supervisor or Quality Assurance Manager. Summary of Duties: • Performs first article inspection (FAI) of newly designed or revised products., • Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order. In-process inspection of parts being manufactured., • Inspects sub-assemblies used in the construction of aircraft interiors and all final products prior to shipment., • Interprets and reads engineering drawings, company and customer specifications to ensure accurate part manufacturing. But what else? (advantages, specificities, etc.) Safran Cabin headquarters is located in California, with a global presence of over 11,000 employees at 36 sites. Site locations are in the United States, Mexico, Brazil, Canada, Germany, France, Czech Republic, the Netherlands, Tunisia and Thailand. Safran Cabin serves over 400 airlines and leasing companies globally and delivers to all airframe OEM manufacturers with a heritage spanning over 80 years in the industry. Discover Safran Cabin through our videos: Safran Cabin (safran-group.com) • Your Career: Safran is committed to providing internal mobility to our employees. We operate globally so the sky is the limit of where your Safran journey can take you., • Your Development: Safran employees have free access to Safran University courses and external tuition reimbursement for approved programs or certifications., • Your Benefits: Our suite of comprehensive benefits include health care (medical, dental and vision), life insurance, 401(k) savings plans with company match, paid time off, Safran Perks with BenefitHub - Employee Discounts & Rewards Marketplace for consumer products/services and more! Candidate skills & requirements Education: High school diploma or equivalent. Experience: 4-7 years. Computer Skill: Familiar with Windows Operating System®. Basic skills with Microsoft office systems. Other Skills: Must possess ability to use precision measuring instruments. Ability to read engineering drawings, specifications and other technical literature is preferred. Ability to effectively use inspection tools such as calipers, micrometers, tape measures, etc. Identify problems with some solving capabilities. Annual salary $37,800 - $59,400 annually ($18.17 hr. - $28.56 hr.) Job location Job location North America, United States, Washington, Everett City (-ies) 415 Riverside Rd. WA 98201 Everett Applicant criteria Minimum education level achieved High School Diploma/GED Equivalent Minimum experience level required More than 3 years

Manufacturing Technician I BLR Aerospace, LLC, a Ducommun Incorporatedcompany, has an immediate opening for Manufacturing Technician I. This is a full-time, on-siteposition for a candidate with relevant production experience, preferably inaerospace or a technical field. BLR is seeking to recruit a ManufacturingTechnician I in the Metro Everett/Seattle, WA area. This is a full-timerole for on-site work performed in our Everett, WA facility. The ideal candidate will have 3-5years of relevant production experience in aerospace structural assembly. Thecandidate must possess the skills and ability to set up, operate, and maintainhandheld manufacturing equipment. Knowledge of and experience with thin sheetmetal assemblies is required. The ability to follow as well as develop anddocument assembly processes and techniques is required. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, producing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications. Our Facility in Everett, WA is located at 11002 29th Ave. W Bldg C19, Everett WA 98204. Why Ducommun? • Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces, • Clean and climate controlled working environment, • Opportunity for career growth, • Responsible for accuracy, competency and efficiency when conducting tasks related to work area.\n, • Follow Work Instructions and processes to ensure assembled parts meet the company's FAA-approved Quality Management System.\n, • Required and accountable for performing quality checks, audits and inspections, and is for the quality of any finished product, subassembly and/or installed components.\n, • Document production operations in corresponding records and/or log sheets in accordance with work instructions.\n, • Regularly perform routine cleaning and maintenance procedures for equipment and the manufacturing area.\n, • Actively participate in the continuous improvement of plant operations by supporting LEAN and continuous improvement initiatives.\n, • Adhere to established workmanship standards, policies and practices relating to quality, cost reduction, safety, and ergonomics during performance of assigned duties\n, • Assist with developing and implementing new production methods for continuous improvement.\n, • Maintain a clean, organized and safe environment throughout the facility.\n, • Follow corporate-mandated Environmental, Health and Safety (EHS) protocols, and report all injuries and/or near misses to supervisor immediately.\n\n Required Skills and Qualifications \n • High attention to detail and experience with inventory management\n, • Accuracy in part selection\n, • Thin Sheet Metal working experience, such as Drilling, Riveting, Trimming/Cutting, Countersinking, Dimpling and Assembly\n, • Capable of standing for extended periods\n, • Ability to occasionally lift upwards of 50 lbs. consistently\n, • Experience working in a manufacturing type of environment\n, • Self-starter requiring limited supervision, and able to perform job assignments with a very high degree of accuracy\n, • Excellent interpersonal skills\n, • A quality-focused approach to producing accurate work\n, • H.S. Diploma or GED\n, • 8 hour shifts\n, • Core hours: Monday - Friday 7:00am - 4:00pm\n, • On-site warehouse/shop and office environment\n, • Standard lunch and break periods\n, • Environmentally controlled work area\n, • Eye and ear protection is provided\n\n Equal Opportunity EmployerVeterans/Disabled 11002 29th Ave W, Bldg C-19 Everett, Washington, 98204 United States

Summary You will serve as a RIGGER SUPERVISOR I in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will assign, direct, and review the work of subordinates.\n, • You will plan, schedule, and coordinate work operations.\n, • You will inspect completed work for quality and work order requirements.\n, • You will coordinate work with supporting or related work functions controlled by other supervisors.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: or This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility, qualifications, and time-in-grade requirements must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a SHIPFITTER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will lay out shell, deck and bulkhead plates, I-beams, channels, angles, pipe and round bar and various other structural shapes, gun rings, struts, framing and various foundation structures and other parts from blueprints and templates.\n, • You will cut and shape plates, beams and other heavy metal structural shapes, using various shop machinery.\n, • You will use precision tooling such as micrometers, feeler gauges and torque wrenches for meeting required tolerances per technical work documents when required.\n, • You will report to supervisors on the status and progress of work, nature of work delays and answer questions on overall work operations and problems.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to obtain and maintain a current valid United States driver's license.\n, • You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • You will be required to obtain and maintain a U.S. Passport.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n, • This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.\n, • This position may require rotating shift work.\n, • This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a RIGGING WORK (FORKLIFT OPERATOR) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will be assisting journeyman Riggers in rigging up hoisting and pulling gear for lifting, moving, and positioning heavy loads.\n, • You will be assisting in fabricating, installing, and repairing standing and running rigging, wire and fiber rope items such as slings, towing bridles, nets, and other ship and boat rigging and handling of test weights.\n, • You will be operating an electric, gasoline, or diesel powered fork lift trucks which are capable of lifting loads weighing 10,000 pounds or more.\n, • You will be driving fork lift trucks over rough and sometimes muddy terrain through narrow aisles in outside storage areas.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.\n, • You may be required to lift 100 pounds and occasionally carry equipment that weighs up to 60 pounds.\n, • Work may be performed in shops and aboard ships and submarines, which requires working from uncomfortable and cramped positions which involve stooping, bending, kneeling, reaching, and climbing.\n, • You may be required to climb vertical ladders and occasionally perform work from ladders and platforms.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK WITHOUT MORE THAN NORMAL SUPERVISION. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description • We are hiring immediately for full time PORTER positions., • Location: Canteen - 607 Riverside Road, Suite 130, Everett, WA 98201. Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. Further details upon interview., • Requirement: No previous experience is necessary. Willing to train! About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Maintains cleanliness and sanitation of the front of the house, including all tables, counters, floors, windows and beverage station. Essential Duties and Responsibilities: • Ensures tables are bussed, cleared and cleaned and floors are cleared and swept during peak service times and are prepped prior to service., • Follows safety procedures when transporting dishes and utensils from the front of the house to the kitchen area using trays, bus tubs or carts., • Washes dishes, glasses and pots; cleans cooking stations and equipment to expedite a smooth flow of service while maintaining sanitation standards., • Scrapes and rinses food from dishes and washes them by hand or places them in racks or on conveyor to dishwashing machine depending on assigned equipment. Ensures complete cleanliness and sanitation., • Keeps display equipment clean, free of debris and in compliance with all safety and sanitation standards during meal service., • Helps receive heavy deliveries from dock and transports them to assigned storage areas while observing all safe lifting standards., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1530428 Canteen

Summary You will serve as an ELECTRICIAN LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will serve as an Expert Electrician leading a group to ensure work assignments are completed.\n, • You will be responsible for the repair, overhaul, installation, modification, calibration, and test of electrical systems and equipment on naval surface ships and submarines, both nuclear and non-nuclear.\n, • You will set up, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul surface and sub-surface ship's components.\n, • You will disassemble, clean, and replace visually found defective parts, reassemble, check for more faulty components, replaces the same, align, calibrate and check out equipment using known standards and test equipment.\n, • You will oversee adjustments and repairs to maintain operation of electrical equipment, cause of malfunction or defects and repairs or replaces worn, damaged, or defective parts.\n, • You will assure that all work assignments of the groups are carried out on any of the three shifts as assigned.\n, • You will pass instructions received from supervisors and provide overview of tasks to be performed to other workers.\n, • You will keep supervisor apprised of potential problems, controversial issues, and recommend corrective actions.\n, • You will inspect completed and in process work for quality of workmanship and adhere to requirements, specifications, standards, plans and schedules.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n, • You will ensure plans, blueprints, materials, and tools are available for specific jobs.\n, • You will mentor, train and instruct trade employees in a wide range of electrical equipment.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position may require work onboard ships, the ability to climb vertical ladders and work in awkward positions and confined spaces\n, • This position require may selectee to be willing and able to lift and/or carry loads/items up to 40 pounds in weight.\n, • The incumbent of this position must obtain, maintain and use a government travel card.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a SHIPFITTER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you're within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will provide guidance and direction to Shipfitter shop personnel.\n, • You will provide instruction for nuclear or non-nuclear work of the Structural Group personnel in the skills of the trade.\n, • You will prepare analysis of trade requirements through the use of audits, surveillance, and/or incident reports.\n, • You will provide interpretations and problem resolution for shop employees.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as an ELECTRONICS MECHANIC LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will apply advanced trades knowledge and techniques in of operation, capabilities and limitations of electronic equipment and systems.\n, • You will guide, train and mentor shop personnel performing the removal, disassembly, overhaul, troubleshooting, modification, repair, installation and testing of various electronic equipment.\n, • You will explain work requirements, methods, and procedures, instruct on new procedures, and provide advice when problems arise.\n, • You will setup, operate and troubleshoot the various types of equipment utilized to manufacture and overhaul surface and sub-surface ship components.\n, • You will use a variety of technical manuals and specifications to determine requirements and ensure quality control is maintained.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a SHIPFITTER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will lay out shell, deck and bulkhead plates, I-beams, channels, angles, pipe and round bar and various other structural shapes, gun rings, struts, framing and various foundation structures and other parts from blueprints and templates.\n, • You will cut and shape plates, beams and other heavy metal structural shapes, using various shop machinery.\n, • You will use precision tooling such as micrometers, feeler gauges and torque wrenches for meeting required tolerances per technical work documents when required.\n, • You will report to supervisors on the status and progress of work, nature of work delays and answer questions on overall work operations and problems.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to obtain and maintain a current valid United States driver's license.\n, • You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • You will be required to obtain and maintain a U.S. Passport.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n, • This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.\n, • This position may require rotating shift work.\n, • This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job details Domain Production Job field / Job profile Quality - Operations quality assurance Job title Non-Destructive Testing Level 2 - SCI Employment type Permanent Professional category Technician Part time / Full time Full-time Job description Nondestructive Inspection (NDI) of structural aircraft components, made from graphite/carbon fiber composite materials, to verify internal structural integrity utilizing Ultrasonic Testing processes and equipment. The work includes equipment setup, operation, adjustment, and evaluation/interpretation of test readings/results within established parameters to determine acceptance or rejection of the components. But what else? (advantages, specificities, etc.) Education: High school diploma or equivalent; NDT certified Basic knowledge Microsoft Office (Word, Excel, PowerPoint) • Ability to lift/carry 30 lbs, • Demonstrated ability to use precision measuring instruments, • Ability to read engineering drawings, specifications and other technical literature., • 0-3 year's experience in Quality, aerospace experience preferred, • Effective oral and written communications skills in English required., • Demonstrated ability to handle multiple projects and assignments, • Problem solving, well organized, detailed oriented and accurate., • Previous NDT Certification, Level 1 Classroom Training, and/or Level 2 Classroom training a plus, • Understanding of higher level math (trigonometry) a plus, • Written proof of previous experience/hours/training/certification required, if applicable, • Candidate skills & requirements, • Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate the results for acceptance or rejection, • Be thoroughly familiar with the scope and limitations of the, • technique/method in which they are certified., • Be capable of providing the necessary guidance and/or supervision to trainees and Level 1 personnel in the technique and/or method in which they are certified., • Be familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer., • Have a basic knowledge of product manufacturing and inspection technology., • Affirmatively protect and maintain the confidentiality of Safran products, • As business conditions change, productively react and handle other essential tasks as assigned now or in the future, • Conducts routine tasks as directed, • Able to work independently with high moral and ethical standards with a Quality first mindset., • Able to work any shift and/or overtime Annual salary $50,340.00 - $79,110.00 Job location Job location North America, United States, Washington, Everett City (-ies) 12810 State Ave Marysville, WA 98271 Applicant criteria Minimum education level achieved High School Diploma/GED Equivalent Minimum experience level required More than 3 years Additional Languages preferred English (Fluent) ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency Yes

Manufacturing Technician I BLR Aerospace, LLC, a Ducommun Incorporatedcompany, has an immediate opening for Manufacturing Technician I. This is a full-time, on-siteposition for a candidate with relevant production experience, preferably inaerospace or a technical field. BLR is seeking to recruit a ManufacturingTechnician I in the Metro Everett/Seattle, WA area. This is a full-timerole for on-site work performed in our Everett, WA facility. The ideal candidate will have 3-5years of relevant production experience in aerospace structural assembly. Thecandidate must possess the skills and ability to set up, operate, and maintainhandheld manufacturing equipment. Knowledge of and experience with thin sheetmetal assemblies is required. The ability to follow as well as develop anddocument assembly processes and techniques is required. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, producing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications. Our Facility in Everett, WA is located at 11002 29th Ave. W Bldg C19, Everett WA 98204. Why Ducommun? • Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces, • Clean and climate controlled working environment, • Opportunity for career growth, • Responsible for accuracy, competency and efficiency when conducting tasks related to work area.\n, • Follow Work Instructions and processes to ensure assembled parts meet the company's FAA-approved Quality Management System.\n, • Required and accountable for performing quality checks, audits and inspections, and is for the quality of any finished product, subassembly and/or installed components.\n, • Document production operations in corresponding records and/or log sheets in accordance with work instructions.\n, • Regularly perform routine cleaning and maintenance procedures for equipment and the manufacturing area.\n, • Actively participate in the continuous improvement of plant operations by supporting LEAN and continuous improvement initiatives.\n, • Adhere to established workmanship standards, policies and practices relating to quality, cost reduction, safety, and ergonomics during performance of assigned duties\n, • Assist with developing and implementing new production methods for continuous improvement.\n, • Maintain a clean, organized and safe environment throughout the facility.\n, • Follow corporate-mandated Environmental, Health and Safety (EHS) protocols, and report all injuries and/or near misses to supervisor immediately.\n\n Required Skills and Qualifications \n • High attention to detail and experience with inventory management\n, • Accuracy in part selection\n, • Thin Sheet Metal working experience, such as Drilling, Riveting, Trimming/Cutting, Countersinking, Dimpling and Assembly\n, • Capable of standing for extended periods\n, • Ability to occasionally lift upwards of 50 lbs. consistently\n, • Experience working in a manufacturing type of environment\n, • Self-starter requiring limited supervision, and able to perform job assignments with a very high degree of accuracy\n, • Excellent interpersonal skills\n, • A quality-focused approach to producing accurate work\n, • H.S. Diploma or GED\n, • 8 hour shifts\n, • Core hours: Monday - Friday 7:00am - 4:00pm\n, • On-site warehouse/shop and office environment\n, • Standard lunch and break periods\n, • Environmentally controlled work area\n, • Eye and ear protection is provided\n\n Equal Opportunity EmployerVeterans/Disabled 11002 29th Ave W, Bldg C-19 Everett, Washington, 98204 United States

Summary You will serve as a PIPEFITTER SUPERVISOR I in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will plan work schedules of subordinates and establish priorities on the basis of general work schedules methods and instructions from higher levels of supervision.\n, • You will make recommendations concerning training requirements, skills, and qualifications of personnel.\n, • You will instruct subordinates regarding work requirements, methods, procedures, safe work practices and scheduling requirements.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a ELECTRICIAN LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will determine placement of electrical distribution panels and other equipment.\n, • You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard environment.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will operate power tools (e.g., pipe benders, cutters, power drills) to cut, bend, fit, and thread components of electrical equipment and systems.\n, • You will use hand tools and test equipment to check alignment, output, or resistance to ground and other electrical characteristics.\n, • You will diagnose faulty electrical equipment or systems to determine rework or replacement of faulty components on nuclear ships alterations and repairs.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Manufacturing Technician I BLR Aerospace, LLC, a Ducommun Incorporatedcompany, has an immediate opening for Manufacturing Technician I. This is a full-time, on-siteposition for a candidate with relevant production experience, preferably inaerospace or a technical field. BLR is seeking to recruit a ManufacturingTechnician I in the Metro Everett/Seattle, WA area. This is a full-timerole for on-site work performed in our Everett, WA facility. The ideal candidate will have 3-5years of relevant production experience in aerospace structural assembly. Thecandidate must possess the skills and ability to set up, operate, and maintainhandheld manufacturing equipment. Knowledge of and experience with thin sheetmetal assemblies is required. The ability to follow as well as develop anddocument assembly processes and techniques is required. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, producing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications. Our Facility in Everett, WA is located at 11002 29th Ave. W Bldg C19, Everett WA 98204. Why Ducommun? • Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces, • Clean and climate controlled working environment, • Opportunity for career growth, • Responsible for accuracy, competency and efficiency when conducting tasks related to work area.\n, • Follow Work Instructions and processes to ensure assembled parts meet the company's FAA-approved Quality Management System.\n, • Required and accountable for performing quality checks, audits and inspections, and is for the quality of any finished product, subassembly and/or installed components.\n, • Document production operations in corresponding records and/or log sheets in accordance with work instructions.\n, • Regularly perform routine cleaning and maintenance procedures for equipment and the manufacturing area.\n, • Actively participate in the continuous improvement of plant operations by supporting LEAN and continuous improvement initiatives.\n, • Adhere to established workmanship standards, policies and practices relating to quality, cost reduction, safety, and ergonomics during performance of assigned duties\n, • Assist with developing and implementing new production methods for continuous improvement.\n, • Maintain a clean, organized and safe environment throughout the facility.\n, • Follow corporate-mandated Environmental, Health and Safety (EHS) protocols, and report all injuries and/or near misses to supervisor immediately.\n\n Required Skills and Qualifications \n • High attention to detail and experience with inventory management\n, • Accuracy in part selection\n, • Thin Sheet Metal working experience, such as Drilling, Riveting, Trimming/Cutting, Countersinking, Dimpling and Assembly\n, • Capable of standing for extended periods\n, • Ability to occasionally lift upwards of 50 lbs. consistently\n, • Experience working in a manufacturing type of environment\n, • Self-starter requiring limited supervision, and able to perform job assignments with a very high degree of accuracy\n, • Excellent interpersonal skills\n, • A quality-focused approach to producing accurate work\n, • H.S. Diploma or GED\n, • 8 hour shifts\n, • Core hours: Monday - Friday 7:00am - 4:00pm\n, • On-site warehouse/shop and office environment\n, • Standard lunch and break periods\n, • Environmentally controlled work area\n, • Eye and ear protection is provided\n\n Equal Opportunity EmployerVeterans/Disabled 11002 29th Ave W, Bldg C-19 Everett, Washington, 98204 United States

Summary You will serve as a SHIPFITTER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will install and fit parts on ships and locate positions of pieces by reference to water line, center lines, frame lines and other reference points.\n, • You will install packing, gaskets, liners and similar items where necessary.\n, • You will remove and repair or replace damaged parts of doors, hatches, and ship structures\n, • You will lay out shell, deck and bulkhead plates, I-beams, channel bar, angle bar, and other structural shapes, gun rings, struts, framing, and foundation structures and other parts from blueprints and mold loft templates.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a MACHINIST LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in Shop 31. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will inspects completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees. Demonstrate proper work methods and discuss viable alternatives, considerations, etc.\n, • You will perform research to continually improve trade processes and keeps shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n, • You will assure safety and housekeeping rules are followed.\n, • You will plan, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul marine components from start to post-work review.\n, • You will pass instructions received from supervisors and provides overview of tasks to be performed to other workers.\n, • You will serve as an Expert Machinist leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination and complete annual physicals.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n, • Work is performed in shops and aboard ships and submarines which requires working from uncomfortable and cramped positions which involve stooping, bending, kneeling, reaching and climbing ladders.\n, • This position requires the ability to lift and carry items weighing up to 60 pounds.\n, • This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as an ELECTRICIAN LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will serve as an Expert Electrician leading a group to ensure work assignments are completed.\n, • You will be responsible for the repair, overhaul, installation, modification, calibration, and test of electrical systems and equipment on naval surface ships and submarines, both nuclear and non-nuclear.\n, • You will set up, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul surface and sub-surface ship's components.\n, • You will disassemble, clean, and replace visually found defective parts, reassemble, check for more faulty components, replaces the same, align, calibrate and check out equipment using known standards and test equipment.\n, • You will oversee adjustments and repairs to maintain operation of electrical equipment, cause of malfunction or defects and repairs or replaces worn, damaged, or defective parts.\n, • You will assure that all work assignments of the groups are carried out on any of the three shifts as assigned.\n, • You will pass instructions received from supervisors and provide overview of tasks to be performed to other workers.\n, • You will keep supervisor apprised of potential problems, controversial issues, and recommend corrective actions.\n, • You will inspect completed and in process work for quality of workmanship and adhere to requirements, specifications, standards, plans and schedules.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n, • You will ensure plans, blueprints, materials, and tools are available for specific jobs.\n, • You will mentor, train and instruct trade employees in a wide range of electrical equipment.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position may require work onboard ships, the ability to climb vertical ladders and work in awkward positions and confined spaces\n, • This position require may selectee to be willing and able to lift and/or carry loads/items up to 40 pounds in weight.\n, • The incumbent of this position must obtain, maintain and use a government travel card.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job details Domain Performance and Support Job field / Job profile Quality - Program / customer quality assurance Job title Quality Inspector (Level 1 -3) Employment type Permanent Professional category Employees / Staff Part time / Full time Full-time Job description The responsibility of the Quality Inspector is to conduct various internal quality functions in support of quality, customer, production, engineering and purchasing requirements. Summary of Duties: • Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. Average inspection time per month., • Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database., • Inspects incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and returning unacceptable materials using company's non-conforming material processing procedure. Average inspection time per part received - 15 minutes. Non-conforming material processing - 15 minutes per NC., • Performs Final Product Inspections including IQT306 Inspections (dimensional inspections)., • Delivery Inspections (C of C) and becoming EASA Part 21 Signature Approved for SVS-FR products, • Proficient use of basic inspection tools such as micrometers, calipers, indicators, comparators, surface plate tools, etc., • Become a Customer Approved Source Inspector as needed, • Support various NCR, Deviation and CPAR processing activities as needed, • Develop Internal Auditing skills for becoming a SVS-WA Internal Auditor, • Support Internal FAI related activity as needed, • Support Document Control activities as needed, • Support OEM on quality related issues., • Some travel may be required, • Other activities as determined necessary Job Requirements: • Understands or is willing to learn company, quality management, and system policies and procedures., • Regular, predictable attendance is required., • Must be willing to work overtime as necessary; a flexible work schedule can be arranged within the team., • Ability to work effectively in a fast paced, ambiguous and rapidly changing environment., • Ability to multitask, work on multiple projects at a time, and maintain a clean and organized work area., • Safran Ventilation Systems USA looks for service-oriented team players with strong interpersonal skills, the right attitude and adaptability to an innovative and evolving environment. Candidate skills & requirements Level 1 Education: High school diploma or equivalent is preferred or equivalent experience. Experience: 0-3 years working in the aviation industry. Computer Skill: Familiar with Windows Operating System®. Other Skills: • Ability to use precision measuring instruments and to read engineering drawings, specifications and other technical literature is preferred., • Ability to navigate through various computer programs such as AX, PLM, Databases, etc., • Basic knowledge of dimensional inspection tools and/or the capability of learning how to use various inspection tools., • Capability of learning how to read engineering drawings for performing various product inspections (Final and Receiving inspections)., • Organizational skills, structured and process oriented. Ability to adapt to rapidly changing priorities., • Attention to detail is a must. Level 2 Education: High school diploma or equivalent. Experience: 4-7 years Computer Skill: Familiar with Windows Operating System®. Basic skills with Microsoft office systems. Other Skills: • Must possess ability to use precision measuring instruments. Ability to read engineering drawings, specifications and other technical literature is preferred., • Ability to navigate through various computer programs such as AX, PLM, Databases, etc., • Ability to effectively use inspection tools such as calipers, micrometers, tape measures, etc. Identify problems with some solving capabilities., • Good repair electro-mechanical inspection and troubleshooting skills., • Read and understand CMM', AMM's, SB's, AD's and drawings, technical publications, regulatory requirements and schematics., • Ability to handle multiple projects and assignments with attention to detail., • Identify problems and solve them independently, work with little to no supervision. Level 3 Education: High school diploma or equivalent. Experience: 8+ years Computer Skill: Intermediate skills with Microsoft office: Windows Operating System®, Excel and PowerPoint. Prior use of and advanced abilities within an ERP system. Other Skills: • Thorough electro-mechanical assembly knowledge and troubleshooting skills., • Read and understand CMM', AMM's, SB's, AD's and drawings, customers technical publications, regulatory requirements and schematics., • Strong knowledge of the product and attention to details., • Training skills for both classroom and OJT training., • Ability to handle and schedule multiple projects, schedule and assignments with the inspection team., • Identify problems and solve them independently, work with no supervision. Annual Salary Range: Level 1: $52,155 - $75,625 Level 2: $57,371 - $83,188 Level 3: $70,687 - $102,496 Annual salary USD 52,155 - 102,496 (25.07 - 49.28 per hour) Job location Job location North America, United States, Washington City (-ies) Everett Applicant criteria Minimum education level achieved High School Diploma/GED Equivalent Minimum experience level required First experience Additional Languages preferred English (Fluent) ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency No

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement anexceptional opportunity to work with an elite team of highly trained professionals whose camaraderie,pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of theDepartment of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time tomake your move. DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce thatstrives to protect the American people by safeguarding our borders, deterring illicit activity, andenhancing the nations economic prosperity. Being a CBPO makes you a valuable member of the FederalLaw Enforcement Officer (LEO) profession. Typical assignments include: • Enforcing customs, immigration, and agriculture laws and regulations., • Facilitating the flow of legitimate trade and travel., • Conducting inspections of individuals and conveyances., • Determining the admissibility of individuals for entry into the United States. You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, SanYsidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando, FL; Honolulu, HI; Chicago, IL; Calais,Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, andSault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, andWild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, TroutRiver, and Buffalo, NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo,Presidio, Progreso, and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT;Blaine, Oroville, and Sumas, WA. The preference locations listed above are expected to have vacancies available in the future, however, ifthe duty locations do not have vacancies at the time of your final offer, you may be offered a dutylocation in another geographic location within the United States. Locations offered are based onoperational and mission requirements and critical agency hiring needs for entry-level CBPOs asdetermined by the CBP Office of Field Operations (OFO). Salary and Duty Location Recruitment Incentives and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in ___) will be offered up to a $15,000 incentive per year, for a three-year service contract, in thefollowing locations: • Arizona: Douglas, Lukeville, Nogales, San Luis, • California: Calexico, • Hawaii: Honolulu, • Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro, • Michigan: Detroit, Port Huron, Sault Sainte Marie, • Minnesota: Grand Portage, International Falls, • Montana: Raymond, Sweetgrass, • New York: Alexandria Bay, Champlain, Massena, Trout River, • North Dakota: Dunseith, Portal, • Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford, • California: Otay Mesa, San Francisco, San Ysidro, Tecate, • Florida: Key West You qualify for the GS-5 grade level if you possess one of the following: Experience:A minimum of three (3) years full-time general work experience that demonstrates theability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR Education Substitution:A bachelor's degree or successful completion of a full four (4)-year course ofstudy in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education:A combination of successfully completed collegeeducation AND general work experience. This will be calculated using your resume and official orunofficial college transcripts submitted with your application. You qualify for the GS-7 grade level if you possess one of the following: Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at leastthe next lower grade level that includes: • Performing physical inspections of people, documents or goods for criminal activity, fraud,and/or illegal operations., • Utilizing observational techniques, evaluating facts, and reviewing documentation whileapplying Federal, State, or local laws and regulations. Combination of Experience and Education:A combination of specialized work experience equivalent tothe next lower grade level AND graduate level education from an accredited college or university. Thiswill be calculated using your resume and official or unofficial transcripts submitted with yourapplication. If you have previous or current law enforcement or military law enforcement experience, you mayqualify at the GS-9 grade level. See the GS-9 Job Opportunity Announcement (JOAs) at USAJOBS, thefederal governments official employment site to determine if you qualify. Other Requirements: Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared underinternational law) for at least three (3) of the last five (5) years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcementretirement provisions. Candidates must be referred for selection to the Customs and Border ProtectionOfficer position before reaching their 40th birthday in accordance with Department of HomelandSecurity Directive 251-03. The age restriction may not apply if you are currently serving or havepreviously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.8336(c) or Title 5 U.S.C. 8412(d). Veterans Preference: You may also be eligible for an excepted service Veterans RecruitmentAppointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training:You will be required to complete a paid pre-academy orientation for approximatelytwo (2) weeks at your home port. You will then attend a 101-day training program CBP Field Operations Academy conducted at the Federal Law Enforcement Training Center (FLETC) located inGlynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training,examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southernborder, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program,which will be completed at their home port. Successful completion of the Academy is required for thisposition. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position ofInterest, select Customs and Border Protection Officer.Youll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain toreview ALL details of the job opportunity announcement and follow all instructions in the applicationprocess, including items (resume, transcripts, etc.) to submit. You will be evaluated based on yourresume, supporting documents, and the CBPO Entrance Exam.As a subscriber to the CBP Talent Network, youll receive monthly emails with information aboutwebinars, career expos, and future opportunities with OFO and CBP.

Customs and Border Protection Officer (CBPO)NEW RECRUITMENT INCENTIVES! U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move. DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nations economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Enforcing customs, immigration, and agriculture laws and regulations., • Facilitating the flow of legitimate trade and travel., • Conducting inspections of individuals and conveyances., • Determining the admissibility of individuals for entry into the United States; and Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in ___) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary. Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity. This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level. Promotions are at the discretion of the agency. Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: • Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods., • Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States., • Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security. Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. Other Requirements: Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port. You will then attend a 101-day training program CBP Field Operations Academy conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port. Successful completion of the Academy is required for this position. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of Interest, select Customs and Border Protection Officer. Youll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam. As a subscriber to the CBP Talent Network, youll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

Posting Date 03/12/2026 8130 Evergreen Way, Everett, Washington, 98203-6419, United States of America Monday-Friday hours between 8am-5pm. This is a 32 hour/week need. Incoming HHD RN will work in an office setting with PD RNs, and in a clinic that also services ICHD and PD patients. Prior dialysis nursing experience is required for this role. Case Management experience is desired but not required. DaVita is seeking an organized, self-directed RN to manage Home Hemodialysis (HHD) patients. You'll educate patients and caregivers in-clinic, enabling them to perform dialysis independently at home. This role blends clinical care, patient education, and case management. Key Responsibilities: • Train patients and caregivers on HHD procedures and self-care, • Manage a caseload of HHD patients, including assessments and care planning, • Monitor treatment progress, conduct home visits, and provide on-call support, • Collaborate with interdisciplinary teams to ensure safe, high-quality outcomes Schedule: • Monday-Friday, 8-hour shifts, • Weekends and holidays off, • Flexible scheduling to manage your own caseload Requirements: • RN license in the state of practice, • Valid driver's license, insurance, and reliable transportation, • ADN required; BSN preferred, • Basic computer skills (MS Word, Outlook) Preferred Experience: • Dialysis (HHD, PD, chronic, or acute), • Patient education or teaching background, • Case management or telehealth experience, • CNN or CDN certification What We Offer: • Medical, dental, vision, and 401(k) match, • Paid time off and PTO cash-out, • Mental health and family support (EAP, Headspace, parental leave, etc.), • Paid training and ongoing professional development Empower patients to take control of their care. Make a meaningful impact-apply today. #LI-JC3 At DaVita, we strive to be a community first and a company second. We want all teammates to experience DaVita as "a place where I belong." Our goal is to embed belonging into everything we do in our Village, so that it becomes part of who we are. We are proud to be an equal opportunity workplace and comply with state and federal affirmative action requirements. Individuals are recruited, hired, assigned and promoted without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, protected veteran status, or any other protected characteristic. This position will be open for a minimum of three days. The Wage Range for the role is $45.00 - $62.00/hour. Registered Nurse HHD Experienced: $47.75 - $62.25/hour. If a candidate is hired, they will be paid at least the minimum wage according to their geographical jurisdiction and the exemption status for the position. Washington Exempt: $80,168.40/year Washington Non-exempt: Bellingham: $19.13/hour, Burien: $21.63/hour, Everette: $20.77/hour, Unincorporated King County: $20.82/hour, Renton: $21.57/hour, Seattle: $21.30/hour, Tukwila: $21.65/hour, Remainder of Washington state: $17.13/hour For location-specific minimum wage details, see the following link: ___ Compensation for the role will depend on a number of factors, including a candidate's qualifications, skills, competencies and experience. DaVita offers a competitive total rewards package, which includes a 401k match, healthcare coverage and a broad range of other benefits. Learn more at ___ Colorado Residents: Please do not respond to any questions in this initial application that may seek age-identifying information such as age, date of birth, or dates of school attendance or graduation. You may also redact this information from any materials you submit during the application process. You will not be penalized for redacting or removing this information.

Dental Assistant $3,000 sign-on bonus! Canyon Creek Family and Implant Dentistry is looking for a Dental Assistant to join our team. Why Heartland Dental? Heartland Dental is the nation's largest dental support organization, providing non-clinical administrative support services to more than 3,000 supported doctors across 39 states and the District of Columbia in 1,900+ dental offices. Each Heartland Dental supported office is unique to the community and the patients they serve. Supported doctors are the clinical leaders of their practice, retain full clinical autonomy, and establish their own care philosophies. All Heartland Dental supported doctors are united by a common goal: delivering the highest quality dental care and patient experiences. As a Dental Assistant, you'll enjoy state of the art technology while being surrounded by camaraderie and support. This is where patients come first, and continuous learning is encouraged! Hard-working and motivated, the successful candidate will bring a passion for providing the best patient care to the communities they serve. More about the role • Greet and welcome patients from the start of their dental journey, as well as sustain patient comfort and provide appropriate education throughout treatment, • Conduct a thorough review of the patient's health history in order to provide quality care, • Take and process x-rays and other diagnostic assessments (iTero 3D scanner, digital photography, etc.), • Provide superior chairside assistance (i.e., four-handed dentistry) to supported dentists during a wide variety of procedures in accordance with the state dental practice act, • Utilize Dentrix for patient scheduling and record keeping, • Prepare treatment room with strict adherence to safety protocols and following OSHA & CDC recommendations, • Manage supply and inventory levels, as well as place and expedite orders as needed, • Partner with the providers and team to implement Heartland Dental systems and maximize office workflow What You'll Gain • Competitive benefits including health insurance, retirement savings plans, six paid holidays, and PTO (paid time off), • Front loaded education and training, providing you the opportunity to develop to your full potential, • Opportunity to be a part of a secure company with 20+ years of industry leading experience that provides a stable career with unlimited growth potential About Canyon Creek Family and Implant Dentistry Canyon Creek Family and Implant Dentistry, like each Heartland Dental supported office, is unique to the community and the patients they serve. • Join a 7 person team that thrives on collaboration, communication and community, • Looking for a strong team player eager to grow within the dental field Minimum Qualifications • Working knowledge of dental procedures and terminology, • Experience working in a fast-paced and customer-centric environment, • If required under the state dental practice act, dental assistant certification and/or x-ray certification, • Excellent communication and organizational skills, • The position will have access to minimum PHI necessary for performing job-related functions; regular HIPAA training, aligning with the specific role and responsibilities, will be required; and the individual will need to protect PHI and maintain data safeguards. Preferred Experience • 1+ years of experience in a dental setting, • Dentrix or other dental software experience, • Dental assisting school certification Physical Requirements: • Ability to perform essential duties satisfactorily with or without reasonable accommodation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the position, • Prolonged periods sitting and standing, • Must be able to lift and carry up to 45 pounds at times, • Availability to attend virtual training sessions (or in-person) periodically throughout the year, • As part of our commitment to maintaining a safe and healthy environment for both team members and patients, a tuberculosis (TB) test is required for all new hires in dental office positions. This is a standard requirement for dental office roles and must be completed prior to starting employment. The test will be arranged during the pre-employment process, and any necessary guidance or paperwork will be provided. Not applicable in the state of FL & TN. Who is Heartland Dental? Heartland Dental is the nation's largest dental support organization, providing non-clinical administrative support services to more than 3,000 supported doctors across 39 states and the District of Columbia in over 1,800 dental offices. Each Heartland Dental supported office is unique to the community and the patients they serve. Supported doctors are the leaders of their practice and retain clinical autonomy. All Heartland Dental supported doctors are united by a common goal: delivering the highest quality dental care and experiences to the communities they serve. At Heartland Dental, we're committed to living our core values which promote diversity and inclusion. We provide all employees and applicants for employment the protections of federal, state, and local laws affording equal opportunity in employment.

Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help • You will be identifying and associating metals, alloys and filler metal by color code and standard markings., • You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests., • You will be using test methods for determining metals or alloys., • You will be inspecting completed welding projects., • You will be using various welding machines and welding processes to weld piping parts or structures. Requirements Help Conditions of employment • Must be a US Citizen., • Must be determined suitable for federal employment., • Must participate in the direct deposit pay program., • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326., • Males born after 12-31-59 must be registered for Selective Service., • This may be a bargaining unit position., • You may be required to successfully complete a pre-appointment physical examination., • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal., • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required., • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing., • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs., • This position may require exposure to high noise levels., • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required. Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Chief Aerospace Safety Office (CASO) team are seeking a Mid-Level (Level 3) or Senior (Level 4) Safety & Airworthiness Specialist to join its Regulatory Administration & Airworthiness Compliance team within Boeing ODA (Organization Designation Authorization) in Everett, Washington. This is a unique career opportunity that will support the management and execution of the ODA Unit Member Interference processes, ensuring strict adherence to the requirements of the Aircraft Certification, Safety, and Accountability Act of 2020. This includes early dispute resolution, interference allegation investigations, coordination with Corporate Investigations and Legal, and ensuring compliance with FAA requirements related to interference prevention and resolution. The candidate will apply detailed knowledge of Boeing's ODA procedures, FAA regulations, and the Act's mandates to support root cause analyses and corrective action plans related to interference and certification safety issues In Addition, this role will work closely with a dynamic team of project managers, internal Boeing organizations, and the Federal Aviation Administration (FAA). The successful candidate will lead a variety of compliance-related projects, primarily conducting and managing Root Cause Analyses (RCA) and applying problem-solving models on issues identified by the FAA or internally. This Individual Contributor role requires the use of various project management tools and software to facilitate and conduct investigations related to Airworthiness Non-Compliances and ODA unit member interference. The candidate will conduct research to determine noncompliance with the ODA Procedures Manual, Code of Federal Regulations (CFRs), and the Aircraft Certification, Safety, and Accountability Act of 2020. They will provide oversight and guidance to resolve medium to complex certification/compliance technical issues, clarify procedures related to FAA-issued Letters of Investigation, compliance actions, voluntary disclosures, and Part 25 Airworthiness Non-Compliances. The role involves close coordination with internal stakeholders and the FAA, organizing and conducting meetings to resolve outstanding issues, and cross-functional collaboration between Engineering teams, Regulatory Administration, Safety, Quality, and other organizations. The candidate will ensure regulatory project milestones are met and will create and review documents for internal and external stakeholders, including the FAA. Close monitoring and tracking of assigned action items is expected to support company performance goals. Primary responsibilities: • Manage and execute the ODA Unit Member Interference processes in accordance with Boeing Procedures Manual, FAA regulations, and the Act's requirements, including early dispute resolution and interference allegation investigations., • Coordinate with Corporate Investigations, Legal, ODA administrators, and other stakeholders to ensure timely and compliant resolution of interference and certification safety issues., • Prepare and submit required reports and correspondence to the FAA within regulatory timelines, including initial and final interference reports, ensuring alignment with the Act's transparency and accountability provisions., • Facilitate root cause analyses (RCA) and development of corrective action plans (CAP) for substantiated interference and compliance issues, supporting a culture of safety and accountability., • Utilize project management tools to track and report on interference, compliance, and certification safety metrics., • Maintain confidentiality and handle sensitive information with discretion, supporting whistleblower protections and ethical reporting., • Communicate effectively across departments with strong verbal and written skills to share ideas, present findings, and provide recommendations., • Develop and monitor the implementation of ___ to address substantiated interference and prevent recurrence, • Gather and analyze relevant data to perform root cause analysis and investigations., • Apply critical thinking to evaluate data and processes to support compliance, safety, and interference resolution. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett. Basic Qualifications (Required Skills and Experience): * Level 3: 6+ years of related work experience or an equivalent combination of education and experience * Level 4: 10+ years of related work experience or an equivalent combination of education and experience * 3+ years of experience in project management * 3+ years of experience in systems engineering * Experience or familiarity with regulatory compliance processes, investigations, or dispute resolution Preferred Qualifications (Desired Skills and Experience): * Previous experience with Product Safety in aerospace or related industries * 1+ years of experience with FAA regulations, ODA procedures, and the Aircraft Certification, Safety, and Accountability Act of 2020 * Deep understanding of 14 CFR § 183.57 (ODA Responsibilities) * 1+ years of experience with Root Cause Analysis * Experience with ODA Unit Member Interference reporting and resolution processes * Experience working with Corporate Investigations, Legal, or compliance teams * Knowledge of root cause analysis methodologies applied to compliance or personnel issues * Strong attention to detail and ability to handle sensitive and confidential information * Excellent communication and interpersonal skills. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range • Mid-Level (Level 3): $102,000 - $138,000, • Senior (Level 4): $127,500 - $172,500 Applications for this position will be accepted until Mar. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton , Washington. As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: * Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications. * Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate. * Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks. * Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements. * Monitor manufacturing processes and document findings as required to ensure compliance with quality standards. * Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications. * Screen paperwork for options, substitutions, and effectiveness of parts and materials. * Identify, investigate, and document discrepancies, reporting them to the shop as necessary. * Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records. * Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required. * Coordinate and complete travelers, investigating and clearing check orders as necessary. * Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed. * Ensure that certifications for tools, test equipment, and personnel are current and compliant. * Assist other employees by providing information and answering questions regarding functions, methods, and procedures. * Perform first article inspections and FAA conformities, coordinating results as required. * Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES). * Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives. * Initiate and document any nonconforming materials or assemblies according to specifications and procedures. * Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards. * Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required. * Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers. * Refer to rejection tags and trouble reports to identify problems and initiate corrective actions. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications * 2+ years of experience as a Quality Inspector * 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators * 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design) * Experience working with Microsoft Office (Excel, Word, PowerPoint) * Proficiency in reading, writing, and speaking English Preferred Qualifications: * Electrical experience Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement * This position is for a variety of shifts At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement Applications for this position will be accepted until Apr. 24, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About TransWest: We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. We are seeking professional, safety minded Drivers who have a passion for delivering great customer service to our clients! At TransWest we believe our people are the key to making us successful on a daily basis, so we want to invest in you! Compensation: $27.75 - $33.00/ hour $5,000 sign on bonus for full time (30 hours) $2,500 sign on bonus for part time (20 hours) Pay range dependent on years of experience, CDL class, and endorsements. Premium pay: $2.00 / Hour additional when driving a school bus route $1.00 / Hour additional when driving a motorcoach route Benefits: Quarterly safety bonus Medical, Dental, Vision & Life Insurance 401k with matching Annual pay raises Quarterly safety performance bonuses Holiday pay Uniforms provided Up to 80 hours of paid time off per year, with increases based on tenure Paid DOT medical card & physicals Responsibilities: Transport business clients to and from scheduled routes safely and reliably Conduct daily vehicle safety checks on assigned vehicles and report any defects in a timely manner; complete all required operations documentation fully and accurately daily Create a welcoming environment and deliver seamless experience for corporate commuters Must be professional and safety minded Perform DOT daily inspections on assigned equipment and fuel equipment as necessary Provide excellent customer service in every interaction Maintain vehicle cleanliness Other duties as assigned Requirements: Must be at least 21 years of age Acceptable Motor Vehicle Record Commercial Driver's License Class A, B or C Passenger Endorsement Current/Active DOT Medical Card Must pass pre-employment DOT drug test Enjoy people and excel at customer service Able to communicate proficiently in English Able to work independently, yet able to take direction Employment contingent on background check Ability to work a split shift Monday-Friday; typically starting between 4-6AM and ending between 7-8PM with a midday break Physical Requirements Ability to remain seated and operate a vehicle for extended periods. Ability to enter and exit vehicles, including vehicles with stairs, multiple times throughout the shift. Ability to perform routine vehicle inspections, which may involve bending, reaching, or kneeling. Ability to lift, move, or position items weighing up to 50 lbs. Ability to communicate clearly with passengers, dispatch, and team members. Ability to maintain focus and alertness while driving in various weather, lighting, and traffic conditions. Ability to perform the essential driving functions required to operate the assigned vehicle safely and in compliance with DOT and company standards. TransWest Culture: Come join our close-knit team. We enjoy having summer BBQ’s, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.5c143e31-5e48-4549-b638-05792d185386

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Technician to join our Field team in Everett , Washington As an Aviation Maintenance Technician, you will be essential in maintaining the highest standards of quality and safety in aircraft operations. Your role will involve performing a wide range of maintenance tasks on aircraft structures and systems, where your attention to detail and adherence to safety protocols are critical. A Color Vision Certification may be necessary for portions of this job. You will troubleshoot and inspect aircraft to ensure they are flight-ready, diligently documenting all maintenance activities to comply with industry regulations. Your technical expertise will enable you to execute repairs and modifications effectively, ensuring that all work meets stringent specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities * Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft. * Troubleshoot, inspect, test, repair, and service aircraft and engine systems to ensure they are flight-ready, documenting any nonconforming materials or components according to established specifications and procedures. * Conduct audits and surveillance of manufacturing and quality assurance processes, including customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections. * Utilize technical specifications, sketches, manuals, and FAA publications to effectively complete work assignments. * Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment. * Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules. * Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks. * Interpret and adhere to airworthiness directives, service bulletins, and other approved data. * Apply mathematical calculations to set up and use precision measuring tools for accurate measurements. * Create production aids as needed to facilitate work assignments. * Maintain necessary certifications, licenses, and permits for assigned work. * Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights up to 35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.62 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications * 3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction). * Must be willing to work any shift, including days, evenings, nights, and weekends. Preferred Qualifications: * FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified. * 5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background(an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: * This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement * This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives. Safety Sensitive Statement: This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 16, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help • You will perform reviews of documents associated with completed work and trade processes., • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work., • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program., • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules., • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations., • You will serve as an Expert Welder leading a group to ensure work assignments are completed. Requirements Help Conditions of employment • Must be a US Citizen., • Must be determined suitable for federal employment., • Must participate in the direct deposit pay program., • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326., • Males born after 12-31-59 must be registered for Selective Service., • This is a bargaining unit position., • You will be required to successfully complete a pre-appointment physical examination., • This position requires the ability to lift and carry items weighing 50 pounds., • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing., • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal., • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift., • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs., • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time., • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas., • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required., • This position requires rotating shift work., • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc., • Must maintain visual inspection qualifications per VT-271. Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Health, Safety & Environmental (HSE) Specialist - SCM MV Job details General information Entity Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience. Reference number 2026-178695 Job details Domain Performance and Support Job field / Job profile Health safety and environment - HSE preventionist Job title Health, Safety & Environmental (HSE) Specialist - SCM MV Employment type Permanent Professional category Professional, Engineer & Manager Part time / Full time Full-time Job description Safran Cabin Materials located in Marysville, WA is recruiting for a: Health, Safety & Environmental (HSE) Specialist The Health, Safety and Environmental (HSE) Specialist develops and implements policies, programs and systems meant to promote employee health, safety and environmental performance consistent with all regulatory provisions and the Safran Group reference system. They also advise and support the creation and implementation of the local HSE improvement plan and advise and support site management and operational staff to promote employee health, safety and environmental performance. Help maintain all regulatory provisions and assist with the application of the Safran Group reference systems. Support implementation of Safran Group policy, fundamentals, standards and objectives. Assist with regulatory and legal monitoring. Ensure regulatory registers (including the 'comprehensive assessment') are properly kept and regularly checked. Support operational staff with HSE obligations. Support monitoring and reporting methods adapted to local circumstances. Carry out HSE audits and inspections. Suggest, review and monitor corrective and preventive actions. Support the creation and implementation of the local HSE improvement plan. In liaison with operational staff, identify any significant dangers and hazards and any significant environmental aspects and impacts, and monitor them. Ensure local HSE policy is being applied. Suggest areas of improvement and local improvement initiatives. In liaison with operational staff, establish HSE action plans to achieve set objectives and targets. Monitor the application of action plans. Manage a portfolio of HSE improvement projects. Advise and support site management and operational staff on all HSE activities. Implement Safran Group tools, methods and procedures and suggest ways to improve them. Assist and deploy the HSE training plan. Support communication and awareness initiatives. Assist and update all documentation relating to the HSE Management System. Ensure HSE documents are properly managed and disseminated. Take part in analyses and surveys. Take part in incident investigations, root cause analyses and closure of corrective action plans. Support initiatives that identify and communicate facility risk exposure, prioritize risk reduction needs, and ensure closure of recommendations to reduce risk. Organize emergency drills. Prepare information for Safran Group HSE reporting. But what else? (advantages, specificities, etc.) Safran Cabin headquarters are in Huntington Beach, California, with a global presence of over 100,000 employees at 35 sites. Site locations are in the United States, Mexico, Brazil, Canada, Germany, France, Czech Republic, the Netherlands, Tunisia and Thailand. Safran Cabin serves over 400 airlines and leasing companies globally and delivers to all airframe OEM manufacturers with a heritage spanning over 80 years in the industry. Discover Safran Cabin through our videos: Safran Cabin (safran-group.com) * Your Career: Safran is committed to providing internal mobility to our employees. We operate globally so the sky is the limit of where your Safran journey can take you. * Your Development: Safran employees have free access to Safran University courses and external tuition reimbursement for approved programs or certifications. * Your Benefits: Our suite of comprehensive benefits include health care (medical, dental and vision), life insurance, 401(k) savings plans with company match, paid time off, Safran Perks with BenefitHub - Employee Discounts & Rewards Marketplace for consumer products/services and more! Candidate skills & requirements At Safran Cabin, diversity & inclusion is a source of richness that adds quality of life, performance, and innovation. We welcome diverse contributions and provide equal employment opportunity to all individuals regardless of race, color, religion, sex/gender, sexual orientation, gender identity/gender expression, marital status, pregnancy, age, national origin, ancestry, disability/medical condition, military or veteran status, citizenship status, genetic characteristics or information, or any other characteristic protected by applicable federal, state, and local laws. We seek service-oriented team players with strong interpersonal skills and a positive attitude, adaptable to our innovative and evolving environment. Across all team members, we are looking for the following attributes: * Team oriented * Process focused * Open & honest communication * Quality minded * Ability to persevere and honor commitments * Recognizes success * Executes with urgency * Creates solutions * Customer focused in everything we do Bachelor's degree required. Experience with Health and Wellness, OSHA, EPA, ISO14001, OHSAS18001, Business Continuity Planning, "Green" Manufacturing, LEAN concepts, LEED Design, SixSigma, TSCA, EPCRA, Workers Compensation. 2-5 years HSE experience. Handles basic issues and problems, and refers more complex issues to higher-level staff. Intermediate working knowledge within Safety/HSE. MS Office. Detail oriented. Well organized. Additional Preferred Skills: (not required) Experience in a manufacturing environment. 5+ years' experience in a Safety/HSE role. This description has been designed to indicate the general nature and level of work performed by an employee within this position. The actual duties, responsibilities and qualifications may vary based on assignment or group. Safran Cabin Materials requires a criminal background check and drug screen to be completed and passed for all positions. Annual salary USD 80,170-100,010 Job location Job location North America, United States, Washington City (-ies) 12806 State Avenue WA 98271 Marysville Applicant criteria Minimum education level achieved Bachelor's Degree Minimum experience level required More than 3 years Additional Languages preferred English (Fluent) ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency Yes

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington. As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: * Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks. * Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells. * Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required. * Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives. * Initiate and document any nonconforming materials or assemblies according to specifications and procedures. * Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance. * Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements. * Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies. * Inspect mockups of engineering design changes to ensure adherence to specifications. * Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes. * Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records. * Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required. * Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts. * Document discrepancies and report them to the appropriate personnel for resolution. * Assist in the training and instruction of lower-grade inspectors, providing guidance as needed. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications * 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design). * 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators. * 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices. * Experience as a Quality Inspector. * Experience working with Microsoft Office (Excel, Word, PowerPoint). * Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. * Ability to complete Fall Protection Training. Preferred Qualifications: * Experience inspecting welds / welds certification * Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement * This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement anexceptional opportunity to work with an elite team of highly trained professionals whose camaraderie,pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of theDepartment of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time tomake your move. DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce thatstrives to protect the American people by safeguarding our borders, deterring illicit activity, andenhancing the nations economic prosperity. Being a CBPO makes you a valuable member of the FederalLaw Enforcement Officer (LEO) profession. Typical assignments include: • Enforcing customs, immigration, and agriculture laws and regulations., • Facilitating the flow of legitimate trade and travel., • Conducting inspections of individuals and conveyances., • Determining the admissibility of individuals for entry into the United States. You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, SanYsidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando, FL; Honolulu, HI; Chicago, IL; Calais,Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, andSault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, andWild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, TroutRiver, and Buffalo, NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo,Presidio, Progreso, and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT;Blaine, Oroville, and Sumas, WA. The preference locations listed above are expected to have vacancies available in the future, however, ifthe duty locations do not have vacancies at the time of your final offer, you may be offered a dutylocation in another geographic location within the United States. Locations offered are based onoperational and mission requirements and critical agency hiring needs for entry-level CBPOs asdetermined by the CBP Office of Field Operations (OFO). Salary and Duty Location Recruitment Incentives and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in ___) will be offered up to a $15,000 incentive per year, for a three-year service contract, in thefollowing locations: • Arizona: Douglas, Lukeville, Nogales, San Luis, • California: Calexico, • Hawaii: Honolulu, • Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro, • Michigan: Detroit, Port Huron, Sault Sainte Marie, • Minnesota: Grand Portage, International Falls, • Montana: Raymond, Sweetgrass, • New York: Alexandria Bay, Champlain, Massena, Trout River, • North Dakota: Dunseith, Portal, • Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford, • California: Otay Mesa, San Francisco, San Ysidro, Tecate, • Florida: Key West You qualify for the GS-5 grade level if you possess one of the following: Experience:A minimum of three (3) years full-time general work experience that demonstrates theability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR Education Substitution:A bachelor's degree or successful completion of a full four (4)-year course ofstudy in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education:A combination of successfully completed collegeeducation AND general work experience. This will be calculated using your resume and official orunofficial college transcripts submitted with your application. You qualify for the GS-7 grade level if you possess one of the following: Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at leastthe next lower grade level that includes: • Performing physical inspections of people, documents or goods for criminal activity, fraud,and/or illegal operations., • Utilizing observational techniques, evaluating facts, and reviewing documentation whileapplying Federal, State, or local laws and regulations. Combination of Experience and Education:A combination of specialized work experience equivalent tothe next lower grade level AND graduate level education from an accredited college or university. Thiswill be calculated using your resume and official or unofficial transcripts submitted with yourapplication. If you have previous or current law enforcement or military law enforcement experience, you mayqualify at the GS-9 grade level. See the GS-9 Job Opportunity Announcement (JOAs) at USAJOBS, thefederal governments official employment site to determine if you qualify. Other Requirements: Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared underinternational law) for at least three (3) of the last five (5) years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcementretirement provisions. Candidates must be referred for selection to the Customs and Border ProtectionOfficer position before reaching their 40th birthday in accordance with Department of HomelandSecurity Directive 251-03. The age restriction may not apply if you are currently serving or havepreviously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.8336(c) or Title 5 U.S.C. 8412(d). Veterans Preference: You may also be eligible for an excepted service Veterans RecruitmentAppointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training:You will be required to complete a paid pre-academy orientation for approximatelytwo (2) weeks at your home port. You will then attend a 101-day training program CBP Field Operations Academy conducted at the Federal Law Enforcement Training Center (FLETC) located inGlynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training,examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southernborder, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program,which will be completed at their home port. Successful completion of the Academy is required for thisposition. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position ofInterest, select Customs and Border Protection Officer.Youll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain toreview ALL details of the job opportunity announcement and follow all instructions in the applicationprocess, including items (resume, transcripts, etc.) to submit. You will be evaluated based on yourresume, supporting documents, and the CBPO Entrance Exam.As a subscriber to the CBP Talent Network, youll receive monthly emails with information aboutwebinars, career expos, and future opportunities with OFO and CBP.