Parts jobs in Houston, Texas - Page 19Create job alerts

Job Description DESCRIPTION: (Including but not limited to) Working within a team environment, the Blast Operator position is responsible for the blasting duties centered on ensuring parts to be coated are cleaned and prepped by customer specifications as contained within the work order. KEY FUNCTIONS • Will operate in machine blast operations, forcing abrasive material onto a component's surface through a nozzle., • Loads parts into sandblast equipment, maintains adequate supply of blast sand in hopper., • Configure and run blast machines in accordance with the customer’s specifications., • Collect materials, tooling, and blast products prior to initiating operation., • Use hand tools to repair, clean, and adjust equipment., • Comply with all company policies and procedures including Health, Safety and Quality Assurance policies., • Checks work visually, makes minor decisions; detects and reports defective items and unusual conditions to proper supervision., • Sand blasts parts following established methods and procedures to remove surface contaminants and imparts proper surface finish. WORK QUALIFICATIONS: Required: • A minimum of two (2) years of experience in a manufacturing or warehouse facility, • Proven proficiency in fundamental shop math, including handling fractions and decimals, • Proficient in the use of hand and power tools for successful job performance, • Ability to work in a team environment and effectively communicate, • Ability to follow directions and procedures, • 2-5 years of Industrial Gas Turbine Repair experience Required: HS diploma or GED WORK ENVIRONMENT: Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential functions. • Willingness to work a flexible schedule to meet the demands of the role., • Must be able to sit, stand and walk for long periods of time or until the end of the assigned shift. ADA JOB REQUIREMENTS: Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

Job DescriptionDescription: SUMMARY: The Technical Sales Representative is a highly technical sales professional who combines technical expertise with strong sales abilities to promote and sell Evolution’s products for complex motion control applications. Evolution provides innovative solutions for hydraulic, electrical, automation, pneumatic, controls, and lubrication applications. Utilizing a proven sales process, the Evolution Motion Solutions Technical Sales Representative partners with customers to identify their needs, understand their business, and ultimately provide tailored solutions for their applications. This position reports to the Regional Sales Manager. PRIMARY DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform each primary duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform primary duties. • Product Knowledge: Possess an in-depth understanding of the technical details and features of the products of Evolution’s partner suppliers., • Customer Engagement: Interact with customers to determine their needs and provide technical solutions to meet or exceed their expectations., • Sales Presentations: Conduct compelling and technically sound presentations to showcase our products and services to potential customers., • Technical Support: Provide pre-sales technical assistance and support, addressing customer inquiries and concerns related to our products., • Collaboration: Work closely with our supplier partners to stay updated on product enhancements, new products, and industry trends., • Profitability: Be responsible for managing the overall profitability of each customer, • Sales Targets: Meet or exceed sales targets and objectives, taking a proactive approach to identifying and pursuing new business opportunities., • Relationship Building: Cultivate and maintain strong relationships with customers and suppliers., • Documentation: Prepare and maintain accurate records of sales activities, customer interactions, and project information. EDUCATION: • Bachelor’s degree in a related technical field is desired but not required., • High school diploma or GED certification is required., • Proven track record in sales, especially in selling technical products or services., • Demonstrated ability to learn and apply technical concepts to product lines., • Proven skills to effectively communicate with engineers and technical designers to determine and deliver appropriate customer solutions., • Ability and desire to work independently without direct supervision., • Ability to persuade and influence others through excellent verbal, written, and presentation skills., • Aptitude to negotiate and close deals, understanding both the technical and business aspects of the sales process. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Position requires long periods of sitting while driving or riding as a passenger in an automobile. Must be able to move through customer sites, including warehouses, shipyards, oil field rigs, manufacturing facilities, and related machinery, etc. Ability to effectively communicate using company-issued devices such as laptop, mobile phone, etc. Travel is required. This job description is intended to convey information essential to understanding the scope of the position and is not an exhaustive list of skills, efforts, duties, responsibilities or working conditions associated with it. Evolution Motion Solutions is an Equal Opportunity Employer

Job Description Great Western Trailer (GWT) is actively hiring skilled and motivated Trailer Technicians to join our growing team at our Houston, TX facility. If you have experience in semi-trailer maintenance and repair and are looking for a company that values your skills and dedication, we encourage you to apply today. Be a part of our team – Apply now! What’s in it for you? • Weekly Paychecks – Get paid on time, every time., • Weekday Schedule – Monday-Friday, 8:00 AM – 4:30 PM (No weekends!)., • Comprehensive Benefits Package – Health, dental, vision, and life insurance., • 401K, Flexible Spending & Health Savings Account options., • Paid Time Off & Sick Leave – Enjoy work-life balance. GWT is looking for dedicated individuals who are: • Quick Learners – Willing to follow instructions, ask questions, and grow their skills., • Team Players – Punctual, reliable, and able to work independently or collaboratively., • Inspect and repair semi-trailers, including brakes, wiring, bodywork, lift gates, and more., • Install and replace add-on components such as toolboxes, winches, and ramp kits., • Perform fabrication and welding as needed., • Reliable transportation to and from work., • Own a personal set of hand tools (except in California)., • Strong mechanical aptitude and experience with semi-trailer equipment and maintenance., • Ability to operate hand tools, power tools, and pneumatic tools safely and efficiently., • Valid driver’s license (a plus, but not required)., • 3+ years of experience in semi-trailer repairs., • Certified brake and FHWA inspector or ability to obtain certification., • Industry certifications such as ASE or welding certification., • Frequent standing, walking, kneeling, and lifting (up to 50 lbs.)., • Work may be performed in a shop, yard, or mobile service environment., • Exposure to mechanical parts, chemicals, fumes, and varying temperatures. Great Western Trailer (GWT) is a fast-growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states—and more expansions coming soon! We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK. Apply Today! If you have the skills and passion for semi-trailer repair, we want to hear from you. Join a company that values your hard work and offers opportunities for career advancement. Apply now and take your career to the next level with Great Western Trailer in Houston, TX! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631; (956)247-2467; (281)965-2749 Walk-ins Accepted! Apply today! 815 Sheila Lane Channelview, TX 77530 Office Hours: 8:00 AM-5:00 PM General Information Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and shipyard's best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description FloWorks is a leading, privately held specialty industrial supplier of pipe, valves, fittings, and related products, as well as a provider of technical solutions to the energy and industrial sectors. Headquarters in Houston, Texas, Floworks is dedicated to delivering exceptional products, expertise, and service to its customers. Job Information: As the Senior Data Engineer you are responsible for building, managing, and optimizing cloud-based data solutions to support business processes and analytics across the organization. This role requires expertise in ETL development, data modeling, cloud technologies, and business intelligence to ensure data integrity, insightful analysis, and effective reporting. Key Responsibilities: Data Analytics: • Build and manage cloud ETL processes for data extraction, transformation, and loading from multiple sources into data lakes and data warehouses primarily within Microsoft Data Fabric., • Apply business rules, audit, and stage data to ensure data integrity and compliance., • Develop fact and dimension tables to support Power BI report development and other business intelligence needs., • Create visualizations and reports to meet business requirements and support decision-making., • Provide business analysis, problem-solving, and creativity to identify KPIs and metrics that drive business goals., • Ensure timely and accurate performance on assigned projects, maintaining compliance with project budgets and deadlines., • Proactively engage in projects, recognize and resolve problems, and implement solutions independently., • Collaborate with cross-functional teams to gather complete datasets and communicate findings company-wide., • Integrate data across systems using REST and SOAP APIs, including authentication (OAuth), API keys, pagination, rate limits, retries, and error handling., • Design and manage scalable data ingestion pipelines that pull data from SaaS platforms such as Salesforce, NetSuite, Workday, or ERP systems., • Build and maintain internal data APIs to support curated datasets for analysts and applications., • Translate API payloads (JSON, XML) into internal data models for loading into data lakes, warehouses, or MDM environments., • Support Master Data Management (MDM) processes by integrating and synchronizing core business entities across platforms, ensuring consistent, governed, and high‑quality master data throughout the ecosystem., • Implement middleware workflows using platforms such as Azure Logic Apps, Azure Data Factory, MuleSoft, Boomi, or Informatica Cloud., • Develop event‑driven integrations using messaging systems such as Azure Service Bus, Kafka, or RabbitMQ., • Build end‑to‑end orchestration workflows that call APIs, transform data, and deliver it to destination systems., • Apply integration patterns such as ETL/ELT, Change Data Capture (CDC), event streaming, batch vs. real‑time ingestion, and data synchronization., • Ensure secure API access (OAuth flows, token refresh logic) and apply governance practices for PII, auditability, and cross‑platform data flows., • Bachelor’s degree in technology, mathematics, statistics, accounting, finance, or a related quantitative discipline., • Over 5 years of experience in data analytics Microsoft Fabric (high grade)., • Prior in-depth hands-on experience with system integrations utilizing Boomi is required for this position., • Expert in SQL (a must-have skill)., • Highly experienced in cloud technologies, with a strong preference for Microsoft Fabric, DBT, and Azure. Experience with Databricks, Snowflake, and AWS may also be considered., • Proficient in Python programming and data modeling using the Kimball Method (Star Schema)., • Skilled in analytical and visualization tools, with a strong preference for Power BI. Experience with Tableau may also be considered., • Experience and passion for training data science and machine learning models., • Familiarity with Git and source control concepts., • Experience with Databricks, Airflow, Python, AI, AWS, and data integrations with ERPs or Salesforce is a plus., • Ability to work with Azure DevOps and cross-functional teams to define analytics use cases and translate them into technical solutions., • Frequently required to stand, • Frequently required to walk, • Continually required to sit, • Continually required to utilize hand and finger dexterity, • Occasionally balance, bend, stoop, kneel or crawl, • Continually required to talk or hear, • Continually utilize visual acuity to read technical information and/or use a keyboard, • Occasionally required to lift/push/carry items up to 25 pounds, • Occasionally work near moving mechanical parts, • Occasionally exposure to outside weather conditions This role operates in a professional office environment with flexibility for hybrid work. Standard office equipment such as computers, phones, and printers are used. Occasional visits to warehouses or operational sites may be required. The Perks of Working Here FloWorks offers a competitive benefits package designed to support your health, financial well-being, and work-life balance. Highlights include: • Medical, Dental & Vision Insurance with multiple plan options, • Company-paid Life and Disability Insurance, • 401(k) with company match, • Health Savings & Flexible Spending Accounts, • Supplemental coverage (Accident, Critical Illness, Hospital Indemnity), • Employee Assistance Program (includes 3 free counseling sessions), • Identity Theft Protection at discounted rates This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. Committed to fostering a culture where every individual is valued and empowered to contribute to shared success. FloWorks participates in the US Government’s E-Verify program.

Job Description ABOUT EXMAR OFFSHORE EXMAR Offshore, a part of the EXMAR Group of companies () is a multi-disciplinary maritime and offshore solutions provider, designing and delivering sustainable and efficient value to its customers worldwide for the production, storage, supply and transportation of oil and gas. EXMAR Offshore has evolved from its marine engineering roots to become a truly innovative owner, offshore designer and engineer, as well as service provider to the global energy industry. BENFITS OFFERED • 100% Paid Employee Medical, Dental and Vision Insurance Plans, • Dependent Medical, Dental, and Vision Insurance Plans, • Company Paid Group Life and Accidental Death & Disability (AD&D), • Company Paid Short-Term & Long-Term Disability, • Term-Life, Portable Life Insurance Plans, • Critical Illness, Accident & Hospital Indemnity Plans, • Wellness Incentive Plans, • Paid Holidays, • Paid Time Off, • Development & Training Opportunities, • 401(k) Matching As a Project Engineer at Exmar Offshore, you’ll play a central role in bringing large-scale offshore projects to life, connecting technical teams, managing critical workflows, and ensuring every moving piece aligns from concept to completion. You’ll partner with engineers, contractors, and stakeholders across disciplines to: • Keep projects on track through schedule management and deliverable tracking, • Translate technical challenges into actionable solutions, • Drive data-informed decision-making through reporting and performance analytics The ideal Project Engineer a detail-oriented problem solver who thrives in complex, fast-paced project environments. With a strong technical foundation and natural organizational skills, you bring structure to moving parts and clarity to ambiguity. You’re at your best when collaborating across teams: connecting engineers, vendors, and stakeholders to keep projects aligned and progressing. You’re comfortable working with data, building tools, and translating insights into action, all while managing multiple priorities with precision. Success in this role comes from your ability to: • Balance technical understanding with project coordination, • Communicate clearly across cross-functional teams, • Stay organized and proactive in dynamic, deadline-driven environments, • Leverage data to track performance and drive decisions WHAT YOU’LL DO: • Leverage a technical background to support the accurate identification, definition, communication, and resolution of project engineering challenges., • Act as a liaison between engineering teams, contractors, vendors, and project stakeholders to ensure accurate and timely exchanges of technical data., • Understand the project engineering workflow to support the development and management of multi-disciplinary schedules, including the critical path method., • Track and expedite project deliverables towards timely completion., • Evaluate resource allocation and validate the planning thereof., • Support project performance measurement and monitoring activities and identify risks for further attention and mitigation., • Develop and maintain accurate Excel tools to organize data, and to calculate metrics such as key performance indicators., • Generate reports and dashboards that clearly and concisely summarize topics such as project progress, including effective data visualization (e.g., charts, graphs)., • Independently troubleshoot issues and, when appropriate, exercise good judgement to escalate problems as appropriate., • Track, expedite, and closeout Classification Society findings., • Support the project change management process., • Ensure proper file management, including storage, version control, and accessibility., • Organize and maintain project SharePoint sites in a consistent manner to ensure that the team has access to the latest project information including onboarding guides, organization charts, contact lists, etc., • Establish and implement project management processes to effectively plan, coordinate, execute, and closeout projects., • Ensure coordination between disciplines (engineering, procurement, construction, etc.) to avoid design, • clashes, schedule conflicts, and scope misalignments., • Define, assign, track, and expedite project actions., • Support Management of Change process definition and implementation., • Monitor project risks and challenges, develop mitigation strategies, and escalate critical concerns to project leadership., • Provide accurate, timely reporting on project status, trends, and forecasts to inform decision-making and project management efforts., • Ensure the effective use of project management tools (e.g., the in-house tool P-EX) and promote data integrity, user adoption, and system optimization., • Foster a collaborative team culture by facilitating regular coordination meetings, workshops, and reviews between involved parties., • Ensure compliance with project requirements as applicable to project management., • Continuously improve project processes and practices through lessons learned, feedback loops, and process refinement across projects., • Bachelor’s degree in Civil Engineering, , Mechanical Engineering, Technical, Management, or related fields, • 2+ years of experience within an engineering environment., • Experience working in the oil and gas industry., • Proficiency in Microsoft Excel (i.e., advanced skills including formulas, pivot tables, graphing, data analysis,, • and reporting)., • Strong proficiency with Microsoft Teams and Outlook for communication, scheduling, and collaboration., • Excellent written and verbal communication skills., • Strong interpersonal skills to work collaboratively within a team environment., • Ability to manage multiple tasks simultaneously and meet deadlines., • Fluent in written and verbal English. Other languages are assets., • Proficiency with the Microsoft Office Suite, particularly Word, and PowerPoint, Visio, Power BI, or similar tools used for data management and reporting, expert level excel is a plus, • This position requires full-time on-site presence at our Houston, TX offices (77042), • Applicants must be legally authorized to work in the United States at the time of application.

Job Description Construction Manager CLASS SUMMARY: Manages and oversees the construction of capital improvement projects to ensure compliance with all local, state and federal regulations. Consistently communicates accurate information to residents and other stakeholders to inform upcoming project tasks that may be impactful. Projects may include the installation of water and sanitary mains, drainage systems, sidewalks and roadway construction. Position is funded from capital improvement proceeds and may not be extended beyond the funding allocated for capital improvements. TYPICAL CLASS ESSENTIAL DUTIES: (These duties are a representative sample; position assignments may vary.)1.Manages and oversees various construction projects in the field, including field inspections of civil construction workmanship and/or materials; reviews construction plan documents; and enforces all applicable codes, laws, and regulations.2.Enters data into computer systems in the field to produce accurate construction records and prepares daily/weekly/monthly progress reports for administration and record-keeping.3.Identifies and assists in resolving compliance issues related to capital improvement projects; monitors testing lab contracts and activities for materials testing including, but not limited to concrete, asphalt, embedment/backfill of underground utilities.4.Coordinates with internal and/or external departments, personnel, and agencies, including the public and contractors; leads construction meetings to facilitate department operations; work may involve providing technical and general information and assistance to the public, contractors, and relevant stakeholders; and addresses and resolves complaints. 5.Prepares, maintains, compiles, and/or reports, records, updates, files, and other documentation; and maintains and/or updates applicable databases and systems to ensure timely and accurate documentation while in the field. 6.Processes and oversees resident and stakeholder issues related to capital improvement projects including complaints, inquiries, project schedule, and other related issues while in the field.7.Performs other duties as assigned TRAINING AND EXPERIENCE: High School Diploma or GED and five (5) years of experience in public sector construction and capital improvement projects; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above. LICENSING REQUIREMENTS: Valid Texas driver's license. Preference will be given to candidates that have earned the designation Certified Public Infrastructure Inspector (CPII) or similar through the American Public Works Association. KNOWLEDGE: • Civil construction, • Coordinate, schedule and lead construction meetings, • Material testing firms as needed, • Construction plans, specifications, submittals, etc., • Survey benchmarks, elevations, and construction staking, • Basic math skills including ability to scale and measure distance and compute quantities and costs, • Records management, • Manage/lead multiple construction projects, • Perform daily inspections of all workmanship, • Using computers and related software applications to generate daily and periodic reports of work progress, • Communication skills, both oral and written, • Providing customer service;, • Conducting field inspections;, • Mediating hostile situations;, • Performing mathematical calculations;, • Interpreting and applying applicable laws, codes, rules, and regulations;, • Verify and approve monthly invoices for payment PHYSICAL REQUIREMENTS: Positions in this class typically require: climbing, balancing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, feeling, talking, hearing, seeing and repetitive motions. Heavy Work: Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of forces constantly to move objects. Incumbents may be exposed to hazardous physical conditions, such as, mechanical parts, electrical currents, and vibrations; atmospheric conditions, such as fumes, odors, gases, and poor ventilation; hazardous materials, such as chemicals, blood, and other bodily fluids; extreme temperatures; inadequate lighting; work space-related movement restrictions; intense noise; and other environmental conditions, such as, challenging behaviors, imminent danger, and threatening environments. In order to be hired, applicants will need to pass a background check, a drug screen, physical exam, and a reference check. Job Posted by ApplicantPro

Job Description Alliance Auto Body Parts is now part of the XL Parts | The Parts House family of brands, creating expanded opportunities for employees across a growing automotive aftermarket network. We are hiring for multiple positions across our locations and building a pipeline of candidates for current and upcoming opportunities in warehouse, driving, sales and operations. If you are looking for a stable company with real growth potential, apply today. Open Roles May Include • Warehouse Associates, • Order Pullers (picking and staging orders), • Shipping and Receiving Associates, • Delivery Drivers (non-CDL and CDL), • Inside Sales and Counter Sales, • Outside Sales Representatives, • Customer Service and Administrative SupportRequirements, • Reliable and strong work ethic, • Ability to work in a fast-paced environment, • Attention to detail and accuracy, • Ability to lift and move parts as needed, • Valid driver’s license for driving roles, • Bilingual English/Spanish is a plus, • Automotive or aftermarket parts experience preferredGrowth OpportunitiesMany of our leaders started in entry-level roles. We promote from within based on performance, reliability and initiative.Career paths may include:Warehouse Associate → Lead → Supervisor → Operations ManagerDriver → Lead Driver → SupervisorSales → Territory Manager → LeadershipAdditional InformationPre-employment screening may be required including background check, drug screening and motor vehicle record review for driver rolesEqual opportunity employerApply TodaySubmit your application to be considered for current and future openings.

Job Description Combilift Depot is seeking a Mechanic to repair and maintain Combilift forklifts in the Houston area. Your position will require repairing existing customers used and new forklifts. We are looking for a long-term employee to join our team as we expand throughout Texas & Louisiana. Job Duties: • Repairing forklifts., • Diagnose issues with forklifts., • Keeping your work area clean., • Help identify parts that are needed for repairs., • Fill out legible paperwork., • Demonstrate safe operation of job duties., • Be a team player and work with other employees., • Other duties as assigned. Job Requirements: • Must take basic knowledge test to confirm above experience., • Basic Mechanic & Testing Tools, • Current driver's license., • Reliable transportation to get to work., • Professional Appearance., • Read/Write., • Positive attitude & team player., • Able to lift 50 lbs., • Able to work Monday thru Friday – must be reliable and show up to work every day., • Able to communicate directly with others around you., • High School Diploma, GED, or 12 months recent verifiable experience., • Must be able to pass drug test, driving record check, & background check. Job Benefits: • Competitive Hourly Pay, • 5 day work week, • Company Vehicle, • Company Cell Phone & Computer, • Uniforms, • Ongoing education on Combilift products, • Advancement Opportunities, • Paid Holidays, • Paid Vacation, • 100% Paid Employee Health Insurance, • Life Insurance, • Vision & Dental Insurance Options, • 401K with Company MatchCompany DescriptionCombilift Depot was established in 2007 as a family owned and operated forklift dealership specializing in selling, renting, and servicing niche forklifts and attachments to end users. The company has grown to be one of the largest Combilift dealership in the country and currently operates out of 4 physical locations: Tomball (Houston), DFW, San Antonio, and Lafayette. As our company continues to grow, we are looking to add qualified employees to our team.Combilift Depot was established in 2007 as a family owned and operated forklift dealership specializing in selling, renting, and servicing niche forklifts and attachments to end users. The company has grown to be one of the largest Combilift dealership in the country and currently operates out of 4 physical locations: Tomball (Houston), DFW, San Antonio, and Lafayette. As our company continues to grow, we are looking to add qualified employees to our team.

Job Description Who We Are: Born in sunny San Diego, Blenders Eyewear was forged from fun. It all started in a crowded California club in 2012, when founder Chase was inspired by a simple set of off-brand shades and a dope DJ set. What began as a night with close friends and good tunes turned into a full-blown passion for sunglasses and a belief that great style didn’t have to come with a big price tag. Our Mission At Blenders, we design Sun, Snow, and Prescription eyewear with the understanding that compromise is overrated. Every creation is equal parts stylish, performance-driven, and price-friendly—no exceptions. We craft gear for those who lust for life’s adventure and believe it’s better to “Blend Out” than blend in. So if you’ve always felt the day sounds better when you press ‘Play’ on your passions; that hard work is the hook that makes life’s song work; and that great things really can be born from a good time, you should hit us with your credentials. Because like us, it sounds like you’re here to change the game, not just play it. The Future Is Bright at Blenders… are you ready to Live Forward together? We’re searching for a Sales Associate—let us know you have what it takes below! About the Role: Reporting to the Retail Store Manager, the Sales Associate, or as we like to call Shade Specialist, is responsible for providing a world-class customer experience. This role has a direct and immediate impact on the success of Blenders. The Shade Specialist has a positive attitude, professional vibe and is always willing to go above and beyond for our customers. Primary Responsibilities Customer Service: • Communicates the values and brand of Blenders, • Stays up to date on new launches and styles while providing accurate product information, • Anticipates the needs of customers while always offering exceptional style advice, • Assists the ASM & SM with inventory management and cash reconciliation, • Accurately processes all payment transactions through the POS system, • Keeps the store tidy by performing all regular cleaning activities that are assigned, • Maintains safe working conditions for all employees and customers and resolves any safety concerns quickly, • Collaborates with the Managers on ideas to reinvent retail and the Blenders shopping experience, • Maintains stock levels on the floor, • Maintains a positive relationship with the Store Management team, • 1-3 years of retail experience or related field, • Genuine interest in providing outstanding customer service, • Basic understanding of sales practices, • Friendly and enthusiastic, • Strong communicator, • Effectively speak with customers, peers and management, • Self-motivated, • Ability to train and give clear direction, • Problem solving skills Besides working in the Houston Galleria with some of the coolest people you will ever meet, Blenders also offers: • Blenders is growing fast! We've got some incredible opportunities for learning and growth ahead. This is a part-time position operating out of our Houston Store and reporting directly to the Retail Store Manager. The retail store hours are Monday through Sunday. Blenders Eyewear is proud to be an Equal Opportunity Employer. Blenders Eyewear is committed to providing diversity and inclusion training to all employees, and we do not discriminate on the basis of race, religion, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided upon on the basis of qualifications, merit, and business need. Powered by JazzHR AcPuYBIcBU

Job Description JOB TITLE: BILINGUAL MANDARIN CHINESE - PURCHASING AGENT EMPLOYER: Auto Fit USA LLC DEPARTMENT: Purchasing REPORTS TO: COO BILINGUAL MANDARIN CHINESE - PURCHASING AGENT SUMMARY: Seeking an experienced Procurement Assistant who demonstrates a positive attitude, is self-motivated, eager to learn, and is a multi-tasker balancing routine duties and complex tasks in a fast-paced environment. The ideal candidate will be a problem-solver, able to effectively enter and track information, and execute plans and tasks required with keen attention to detail, accuracy, timing, and project completion. Candidates will possess excellent communication skills, be organized, and take initiative in ensuring that operations and purchases proceed smoothly and that projects are delivered with a high level of performance. Being a team player is a must. Top candidates will have experience and demonstrate an understanding and commitment to delivering superior service BILINGUAL MANDARIN CHINESE - PURCHASING AGENT DUTIES AND RESPONSIBILITIES: • Manages the flow of goods from acquisition to delivery and project close-out and billing activities; Assists with the management and tracking of the flow of goods from acquisition through delivery, labeling, and billing for auto body parts; assists in the purchase order development, expediting and tracking process; ensures orders are processed timely fashion. Processes shipments and deliveries expeditiously daily and including scheduling, coordinating, and inspecting. Processes damages and returns of merchandise and claim through our vendors., • Maintains company databases, records, and reports; Enters information into order management, project management, and tracking software; interfaces with billing systems; Extracts data, verifies corrects records; Assists with reconciling and basic accounting functions., • Plans, coordinates enters, tracks, and processes coordinate physical inventories of property and records inventory flow-through; Tracks costs, expenses, and other goods related to managing company assets and purchases; Manages warehouse communications and relationships related to inventories., • Interfaces with and assists with Vendor/Supplier Management, set-up, and coordination including selection, and maintaining pricelists, databases, materials data, and other supplier information, • Provides direct administrative and clerical support for procurement, project management, and the company overall., • Reports on the status of merchandising efforts in an accurate and timely manner; analyzes data and directs changes to improve the success of merchandising plans., • coordinates purchasing details with vendors including but not limited to pricing revisions, order cancellations, discontinued items, acceptable substitutes, backorders, delivery date revisions, and invoice discrepancies and payments., • Performs other related duties as assigned by management., • Develops merchandise sources; solicits bids and quotations; evaluates vendor reliability. PURCHASING BUYER AGENT QUALIFICATIONS: • Bachelor’s degree (B.A./B.S.) in Business, Supply Chain Management, or equivalent with a focus in procurement /purchasing or related discipline, • Bilingual in English and Mandarin (REQUIRED), • Two to four years of related experience or equivalent., • Commitment to excellence and high standards, • Excellent written and oral communication skills, • Excellent presentation skills, • Strong organizational, problem-solving, and analytical skills, • Ability to manage priorities and workflow, • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm, • Proficient in Microsoft Office, • Proven leadership and business acumen skills, • Proven ability to handle multiple projects and meet deadlines, • Strong interpersonal skills., • Ability to deal effectively with a diversity of individuals at all organizational levels., • Good judgment with the ability to make timely and sound decisions, • Creative, flexible, and innovative team player PURCHASING BUYER AGENT COMPETENCIES: • Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem-solving situations; Uses reason even when dealing with emotional topics., • Delegation--Delegates work assignments; Matches the responsibility to the person; Gives authority to work independently; Sets expectations and monitors delegated activities; Provides recognition for results., • Business Acumen--Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals., • Cost Consciousness--Works within approved budget; Develops and implements cost-saving measures; Contributes to profits and revenue; Conserves organizational resources., • Organizational Support--Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity., • Strategic Thinking--Develops strategies to achieve organizational goals; Understands organization's strengths & weaknesses; Analyzes market and competition; Identifies external threats and opportunities; Adapts strategy to changing conditions., • Quality--Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity--Meets productivity standards; Completes work in a timely manner; Strives to increase productivity; Works quickly., • Dependability--Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. PURCHASING BUYER AGENT PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Continually required to stand, sit, and walk., • Continually required to utilize hand and finger dexterity., • Continually required to talk or hear., • Continually utilize visual acuity to use a keyboard., • Occasionally required to lift/push/carry items up to 25 lbs. PURCHASING BUYER AGENT JOB TYPE: • Store Hours: Monday-Friday 8 AM-6 PM, Saturday 8 AM-3 PM, • Health insurance, • Vision insurance, • Dental Insurance, • Employee discount, • 401K, • Accident Emergency Treatment Benefit, • PTO, sick days, and vacation days

Job DescriptionCompany Overview : Dozee Health AI is the pioneer in Contactless Remote Patient Monitoring (RPM), proven to drive transformation at scale. Headquartered in Bengaluru, India, Dozee has emerged as India’s no. 1 RPM Company. We are seeking visionary individuals to help us in this very exciting journey. As a part of our dynamic team, you’ll have the opportunity to collaborate with top healthcare providers in the country, applying AI-powered RPM solutions to tackle some of the most pressing challenges in healthcare - enhancing staff efficiency, improving patient outcomes, and pioneering the next generation of care models Role Overview We are seeking a dynamic, hands-on marketing professional to lead the execution of Dozee’s marketing initiatives in the U.S. market. This role requires someone energetic, creative, and execution-driven — capable of running digital campaigns, coordinating events, managing on-ground activities, and building Dozee’s visibility among key healthcare stakeholders. You will be responsible for generating qualified leads, driving brand visibility, managing event participation, and ensuring consistent messaging across channels. Key Responsibilities * Execute end-to-end marketing campaigns targeting SNFs and other healthcare facilities across digital, event, and direct channels. * Manage lead generation activities — including paid ads, SEO, webinars, email marketing, and social media campaigns. * Plan and execute on-ground marketing — trade shows, conferences, facility events, and healthcare forums. * Oversee CRM usage (HubSpot or similar) to manage lead pipelines, track campaign ROI, and ensure seamless collaboration with the sales team. * Support brand communication — develop content for newsletters, case studies,and thought leadership posts. * Coordinate with creative teams and vendors for content, design, and event collateral. * Research market trends, competitor activity, and partnership opportunities in the SNF and healthcare space. * Monitor performance metrics, generate reports, and recommend optimizations to improve impact. Qualifications * 5-8 years of marketing experience, preferably in healthcare, medtech, or B2B technology. * Proven experience in digital campaign execution, event marketing, and CRM management (HubSpot, Salesforce, or similar). * Strong project management skills — able to juggle multiple campaigns and events with tight deadlines. * Excellent communication, storytelling, and interpersonal skills. * A self-starter with a hands-on mindset, comfortable working in a fast-paced, entrepreneurial environment. * Experience engaging with healthcare providers, SNFs, or institutional buyers is a plus. About Dozee () Vision & MissionSave Million lives with Health AI Dozee is India’s leading AI-Powered contactless Remote Patient Monitoring (RPM) and Early Warning System (EWS). A solution that continuously monitors patients and provides early warnings of clinical deterioration, enabling timely interventions and enhancing patient safety in hospitals, nursing facilities and patient homes. A "Made in India for the World" solution, Dozee has pioneered the world’s first non-contact blood pressure monitoring system. Trusted by leading healthcare providers in India, the USA, and Africa, Dozee is transforming patient safety and care by enhancing outcomes and reducing costs. Dozee is adopted by 300+ hospitals and monitors 16000+ beds across 4 countries. Dozee has monitored over 1 Mn Patients, Delivered 35000+ Life Saving Alerts and Saved 10 Mn+ Nursing Hours. VideosScience Behind Dozee : Ballistocardiography & Artificial Intelligence100 Dozee deliver 144 life saving alerts and INR 2.7 Cr of saving - Sattva StudyDozee saves life of a mother at homeLeading Healthcare Game changers work with DozeeIntroducing Dozee VSDozee Shravan - A clinical grade RPM service Dozee in News: Bloomberg - Oct 21, 2024From AI Beds to Remote ICUs, Startups are plugging India's health GapsNews18 - Oct 26, 2024Now, You Can Remotely Monitor Your Loved Ones in Hospital With Bengaluru Start-Up's 'Shravan'Analytics India Magazine - Oct 29, 2024Dozee Harness AI for Personalised Patient CareET HealthWorld - Sep 16, 2024We trust AI everyday - From Google Maps to Smartphones, So why not use it to enhance patient safety in healthcare?BW healthcareworld - Oct 29, 2024Dozee's AI-Powered System Predicts Patient Deterioration 16 Hours in Advance

Job Description Job Description: Assist carpenters in the construction, installation and fabrication of form structures of wood, patent form systems, or a combination of both. General Requirements: • Practice safety rules., • Follow verbal and written instructions., • Safe use of hand & power tools., • Report to and assist immediate supervisor., • Perform quality work as determined by project specifications., • Accountable for all tools and materials at the end of your shift., • Class A/B/C:, • Clean and oil patented forms., • Use handsaw., • Drive nails., • Strip forms., • Use sledge hammer and stripping bar., • Identify parts and sizes of panels for patented forms., • Identify form hardware to erect forms., • Identify nail types and sizes., • Perform basic math., • Make measurements using a tape to the 1/8” tolerance., • Operate portable generators., • Use form hardware to erect forms., • Recognize and identify unsafe conditions and the regulations applicable to employee’s work environment to control or eliminate any hazards of other exposure to illness or injury., • Class A/B:, • Identify patented form hardware., • Identify lumber by grade and size., • Identify parts of a form and purpose of each., • Know and practice OSHA scaffold and ladder rules., • Hand signal equipment operators., • Use form hardware., • Read blueprint plans and elevations., • Class A:, • Build radius forms, haunch forms and fireproof beams., • Install block-outs and pipe sleeves., • Use a framing square for layout work., • Assemble patented forms., • Read and interpret civil blueprints to perform erection tasks., • Identify reinforcing steel., • Set anchor bolts and embeds., • Perform rigging for lifts., • Form chest from blueprints., • Form manhole., • One (1) to four (4) years of experience in specified skill (depending on mechanic level)., • Written pre-employment qualification test., • Post-offer drug/alcohol screen and physical evaluation., • New Hire Orientation Quiz, • Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace., • Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.)., • Must comply with company’s drug and alcohol abuse policy., • Must be able to pass physical examination, pre-employment if necessary, and as required by the company., • Able to climb and maintain balance on ladders, scaffolding, stairways, etc., • Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.)., • Able to carry 50 lbs. of tool and/or materials. It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director., • Must be able to stand or walk for long periods of time., • Location: industrial construction sites and/or fabrication shop, • Mobility Barriers to Access Job Site:, • Uneven ground level, • Obstructed pathways, • Work performed at low and/or high elevations, • Competitive compensation paid weekly, • Best-in-class; Medical, Dental, Vision, and LTD/STD, • 401(k) with company match, vested day-one, • Employee Stock Purchase Plan [ESPP], • Tuition Reimbursement, • Paid Time Off, Holiday Pay, and Community Service Paid Time Off, • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit . Primoris Energy Services is a major direct-hire contractor in the U.S. delivering self-performed turnkey industrial construction and EPC services. We offer these services to our clients within the refining, gas processing, chemical/petrochemical, hydrogen, power generation, mining, pulp and paper industries from the first groundbreaking activity all the way through commissioning and start-up of the project. Primoris forms a partnership with our customers and major stakeholders from early-stage engineering through construction completion and commercial operation, safely, on-time, and within budget. EEO Statement We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Third-Party Agency Notice Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement.

Job DescriptionDescription: Service Manager - Memorial West At Hilltop Residential, we are proud of our vibrant culture. We are a world-class real estate investment company that provides unparalleled excellence to our customers and investors. Hilltop is dedicated to creating an unforgettable experience not only as a great place to live, but also a great place to work, and we are honored to have received the recognition as a Great Place to Work three years in a row, as well as being named a Top Workplace by the Houston Chronicle! If you want to be a part of a fast-growing company that puts their employees first – Hilltop Residential is it! Hilltop Residential Offers Great Benefits! • Competitive Pay • 401k with Company Match • Comprehensive Medical, Dental and Vision Plans • Paid Life Insurance • Employee Referral Program • Short and Long Term Disability • Paid Time Off • Employee Rent Discount Program • Rapidly Growing Company with Opportunities for Growth Essential Responsibilities • Organize, prioritize, and guarantee service requests and repairs are made correctly and in timely manner, • Inspect grounds, buildings, and other community features daily to minimize liability concerns and ensure excellent curb appeal at all times, • Oversee turnkey operations; ensure vacant units are made rent-ready in a timely manner, • Understand and execute service requests using computer software systems daily, • Perform turnkey work as required and ensure all make-readies are inspected, • Follow the standard operating procedures, • Keep basic knowledge of local and state codes for permitting, sign ordinances and pool regulations, • Follow and enforce the company's policies and procedures, • Communicate effectively with residents, fellow associates, vendors, and supervisors, • Work with community director to handle maintenance-related resident problems, • Assist community director with documenting counseling sessions with maintenance staff, • Maintain a preventative maintenance program to minimize emergency and service repairs, • Maintain hazard communications program; teach and promote safe work practices, • Assist with recruiting, hiring, and training of quality staff; recommend promotions and terminations when necessary, • Work with community director to obtain competitive bids for maintenance-related expenses, • Understand and adhere to budget guidelines, • Purchase supplies and vendor services using standard purchase order systems and proper bidding procedures under the supervision of community director, • 1+ years of hands-on general maintenance experience, • Strong proficiency with property management software systems, • Availability to work a flexible schedule, including weekends, • Rotating on-call responsibility for after-hours emergencies, • EPA/HVAC license or certification, • Valid driver's license and/or access to reliable transportation This role will require an EPA Universal or HVAC certification. If you meet all other requirements and are chosen for this position, Hilltop Residential will invest in your professional development by covering the cost for you to obtain the required certification. Applicants are evaluated on the basis of job qualifications—not race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, veteran, marital or domestic partner status, citizenship or any other status or characteristic covered by federal, state or local law.

Job DescriptionGopuff is looking for Operations Associates (OAs) to join the operations team. Directly reporting to a Site Leader, OAs play an essential role at Gopuff that requires drive, perseverance, positivity, and enthusiasm for the challenge. You will accomplish a variety of operations responsibilities including picking, packing, receiving product both within our site and accompanying kitchen (if applicable), and working with our partner drivers. Customers turn to Gopuff to provide their everyday essentials—day and night, rain or shine. We're assembling a team of thinkers, dreamers and risk takers who are ready to help us reshape the world of retail faster than ever before. And it doesn't hurt if you like snacks. Responsibilities: -Pick and pack items for dispatch to customers-Receive and unpack pallets of product from vendors, ensure physical inventory count matches purchase order/invoice, and resolve discrepancies-Manage inventory and re-shelving of canceled orders-Clean and organize sales floor and overall facility-Manage waste and spoilage through strict compliance with FIFO practice-Contact customer for substituted or out-of-stock items-Handle, scan and move product in a safe and well-organized manner-Stand, push, pull, squat, bend, reach and walk during shifts-Use carts, pallet jacks, dollies and other equipment to move product-Handle products that may contain tobacco, nicotine, and/or alcohol-Work in freezer locations periodically throughout shifts-Capability to walk several flights of steps periodically throughout the day-Prepare quality beverages and food menu items for all customers by observing all recipes and presentation standards-Ensure accuracy of all food and beverage packaged for delivery-Follow health, safety and sanitation guidelines for all products-Receive and put away order/invoice, and resolve discrepancies when they do not match expiration requirements-Maintain Kitchen Facility organization and standards to ensure resources can be accessed while managing waste and spoilage through mindful pouring and food preparation-Prepare, package and stage/handoff orders Qualifications:-High School Diploma or GED Equivalent-Experience working in a restaurant or retail environment (preferred, not required)-The ability to work a fluid schedule and be available during peak shifts (1st, 2nd, 3rd shifts)-General working knowledge of basic web-based software applications (e.g. Google G-Suite)-Stand and walk for the duration of an assigned shift-Lift up to 49 pounds-Available to work flexible hours that may include mornings, evenings, weekends, nights and holidays #LI-DNPWhat We Offer • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay: Pay:, • Gopuff pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based on a cost-of-labor index for that geographic area., • Houston, TX: $13.70 per hour

Job DescriptionSales Supervisor – Malbon About MalbonCommitted to golf's evolution, Malbon is a lifestyle brand revolutionizing the sport by weaving in the energy of fashion, music, art, and design. Founded in Los Angeles in 2017 by Stephen and Erica Malbon, the brand is rooted in a bold philosophy of self-expression and inclusivity. Its distinctive apparel and accessories set Malbon apart, guided by the power of collaboration and community. From global partnerships with Nike, adidas, and New Balance to ambassadors like PGA Champion Jason Day and LPGA standout Charley Hull, Malbon’s not just reshaping golf—they’re building a movement. About the RoleWe’re looking for a Sales Supervisor to join our Malbon boutique in Houston, TX. This role is perfect for a leader who thrives on the sales floor, motivates others by example, and creates a customer experience that feels authentic, elevated, and connected to our brand culture. As a Sales Supervisor, you’ll support the Store Manager in driving results and maintaining operational excellence while leading by presence on the floor. You’ll coach team members, oversee daily functions like inventory and merchandising, and ensure every customer interaction reflects Malbon’s commitment to creativity, inclusivity, and the love of the game. This is a part-time, in-store leadership role with scheduling inclusive of mornings, evenings, weekends, and holidays.What You’ll Do • Deliver an elevated, customer-first experience while embodying Malbon’s mission and brand values., • Lead by example on the sales floor—supporting your team in hitting sales goals and delivering standout service., • Partner with the Store Manager to analyze KPIs (conversion, UPT, AOV) and drive continuous improvement., • Train, coach, and motivate team members; identify future leaders and support their growth., • Support daily operations including inventory management, shipment processing, fitting room oversight, and visual merchandising., • Assist with local activations, events, and community-building initiatives that connect the store to its market., • Represent Malbon as a cultural ambassador, bringing energy and product knowledge to every interaction.What We’re Looking For, • 2+ years of retail or customer-facing experience; previous leadership or key holder experience strongly preferred., • Passion for golf and culture—a strong understanding of the sport, its traditions, and its intersection with fashion and lifestyle., • Proven sales acumen with the ability to engage customers, upsell effectively, and drive results., • Strong communication and leadership skills, with the ability to inspire and support a team., • Flexible availability, including nights, weekends, and holidays., • Active floor presence, including the ability to stand/walk for extended periods, climb ladders, and lift up to 50 lbs., • Must be 18+ years of age.The Malbon Mindset, • Customer-Centric & Hospitality-Driven – Creates real, authentic connections and anticipates needs with style and care., • Agile & Entrepreneurial – Thrives in a fast-paced, ever-changing retail environment., • Team Player with Range – Collaborates openly, gives/receives feedback, and builds trust., • Brand Champion & Product Expert – Shares knowledge with passion, using it to educate and inspire.

Job DescriptionWith over 59 stores and the largest avocational cooking program in the US, Sur La Table offers an unsurpassed selection of exclusive and premium-quality goods for the kitchen and table – and the culinary expertise and inspiration to go along with it. Whether the job entails interacting with our customers, driving digital growth, or providing vital behind-the-scenes support, we’re all here for the same reason – to roll up our sleeves and create happiness through cooking and sharing good food. Position OverviewAs a Seasonal Chef Instructor, Savory at Sur La Table, you are the in-store expert and advocate for all things savory cooking. You deliver #bestincenter service, a company-wide standard for excellence in service, by sharing specialized knowledge in culinary techniques, cooking fundamentals, and personalized instruction that supports all company initiatives. The Seasonal Chef Instructor, Savory plays a key role in inspiring a love for cooking while driving sales of cookware, cutlery, and kitchen tools through hands-on savory classes and engaging culinary instruction. Key ResponsibilitiesCustomer Experience & Brand Representation· Represent Sur La Table’s brand and culture by creating memorable, educational experiences that inspire repeat visits and customer loyalty. · Deliver exceptional in-store culinary experiences focused on savory cooking classes that reflect Sur La Table’s passion for food, teaching, and high standards, while following provided recipes and game plans to ensure consistency and quality.· Communicate technical cooking concepts and savory techniques in a clear, encouraging, and approachable manner.· Maintains expertise by staying current on products, actively engaging in available training, and independently seeking out additional resources.Sales & Business Performance· Drive sales by upholding kitchen standards, encouraging second class sign-ups through strong customer engagement, and promoting retail items used or featured in class.· Deliver class revenue goals by ensuring high enrollment, positive reviews, and guest return rates.· Consistently meet or exceed culinary program goals by delivering exceptional classes that drive customer engagement and sales. Performance is measured by key KPIs such as second-class sign-ups, retail culinary product sales, and guest feedback through Google reviews.Team Engagement & Store Support· Assist in setting up and breakdown of classes including organizing mise en place, prepping ingredients, and cleaning workstations.· Clean and sanitize dishes and equipment promptly to ensure smooth kitchen operations.· Assist with restocking, organizing, and maintaining kitchen supplies and tools to support overall store readiness.Operations & Compliance· Ensure compliance with food safety standards, local health codes, and sanitation regulations.· Properly handle all tools, ingredients, and kitchen equipment to maintain a safe and efficient work environment.· Maintain accurate inventory levels, minimize shrink, and control supply and culinary expenses.· May handle liquor, wine, and beer in compliance with state and location alcohol regulations, company policies, including enforcing age restrictions.· Ensure store safety and cleanliness, addressing any maintenance needs promptly.· Adhere to applicable wage and hour laws. Accurately records time worked according to SLT Policy.· Model and ensure consistent adherence to all Sur La Table policies and standard operating procedures (SOPs). Physical Requirements· Ability to communicate verbally and work cooperatively with associates and customers.· Ability to remain standing for up to 4 hours at a time.· Ability to move about the store directing class participants while selling to customers and retrieving merchandise from stockroom or sales floor.· The capability to accurately perceive and differentiate variations in intensity or quality of flavors or odors, or to identify specific tastes or scents using the tongue or nose.· Ability to grab, reach, push, pull, bend, stoop, kneel and crouch to demonstrate, retrieve and/or replenish merchandise and/or cooking equipment.· Ability to use hands to seize, hold, grasp, turn, or otherwise to chop, whisk, slice, stir, juice and/or demonstrate other techniques.· Ability to lift and/or move merchandise weighing up to 50 lbs.· Ability to ascend/descend ladders to retrieve and/or move merchandise.· Ability to operate a computer, POS system, keyboards, merchandise scanners and mouse to accomplish work.· Available to work between 12 and 16 hours per week, with a flexible schedule, including nights, weekends, and holidays. While this is the minimum availability, scheduled hours may differ based on business needs.· Regular and predictable attendance with the flexibility to adjust class assignments based on demand.· Ability to work in a variable kitchen environment included but not limited to open flames, hot surfaces, temperature variations, various food allergens both physical and airborne. Qualifications & Experience· Must be 21 years of age or older at the time of employment.· A degree in culinary arts is preferred; however, candidates with extensive culinary experience and demonstrated technical proficiency will be considered in lieu of formal education.· 1-2 years of kitchen operations experience.· Valid Food Manager Certification.· Excellent communication, problem-solving, and decision-making abilities.· Passion for community engagement and providing exceptional customer experiences.This job description represents a summary of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. Responsibilities, tasks, and duties of the jobholder might differ from those outlined in the job description and other duties, as assigned, may be part of the job. This job description is not an employment agreement or contract. Sur La Table has the exclusive right to alter this job description at any time without notice. The CSC family of brands provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, provincial, state or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. Washington state applicants only: If you believe that this job posting does not comply with applicable Washington state law, please notify us by sending an email to . It is unlawful in Massachusetts to require or administer a lie-detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The CSC family of brands is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, please contact . We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Bayway Auto Group is an award-winning and growing auto group in the Houston and surrounding area that holds a reputation of excellence and prides itself on its commitment to customer satisfaction! We truly value our team members, as they hold the most important job there is, ensuring that our customers have a wonderful car buying experience. We offer competitive pay & benefits and enjoy rewarding and recognizing them for outstanding effort and results. We are currently searching for Sales Associates who have a high level of integrity, are hardworking and motivated to join our team. Position Summary Position: Car Sales Associate (Used) Classification: Full Time; Exempt (Commission Base) Reports To: General Manager Work Location: In person; South Houston near I-45 and Beltway Essential Duties include but are not limited to: • Stay up to date and knowledgeable of Kia products, services, and inventory, • Utilize marketing tools and networking to build customer base, • Determine each customer's needs by utilizing the Customer Needs Analysis Process, • Select, Present and Demonstrate vehicles per the Vehicle Selection Presentation and Demonstration Process, • Seek Customer Agreement to purchase/lease a vehicle per the Customer Agreement Process, • Encourage repeat and referral business as well as customer satisfaction by utilizing our client Relation Management (CRM) tool, • Deliver new vehicles per the established Vehicle Delivery Process, • Introducing and educating the buyer to the Dealership Service and Parts Department to ensure they continue to return with all their service needs, • Clearly understand and communicate vehicle equity, values, and trade in options to customers, • Understand all applicable Federal, State and Local law governing the sales or lease of a vehicle, • Attend all Sales Meetings, • Other Duties May be assigned Knowledge, Skills & Abilities: • Basic computer skills required to maintain CRM, • Strong sales, communication, and customer service skills, • Able to work individually as well as part of a team. Relevant Work Experience & Other Requirements: • Must meet dealerships requirements for employment which include background check and drug screening, • Must have a valid driver’s license and be insurable based on driving record., • Must be a minimum of eighteen years of age, • Must be punctual and reliable. Physical Requirements: • Must be able to sit, stand, and/ or walk for extended periods of time Compensation & Benefits: • Competitive Commission Based Pay Plan, • Paid Time Off, • 401K retirement plan & annual employer match, • Health, Vision, and Dental benefits, • Health Savings Account, • Company Paid Life Insurance, • Disability, Voluntary Life, & Supplemental plan options, • Discounts, perks, and incentives, • Paid Training, • Opportunity for Growth & Development, • Safe & Team Oriented Work Environment Bayway Auto Group is an Equal Opportunity Employer. We do not discriminate based upon race, religion, color, sex, age, national origin, or disability. We commit to providing reasonable accommodations to qualified individuals with disabilities, as required by the Americans with Disabilities Act (ADA).

Job Description Join Our Dynamic Team at Custom Air Products & Services, Inc. Are you ready to be a crucial part of a rapidly growing company that values hard work, excellence, and teamwork? At Custom Air Products & Services, Inc., we take pride in our commitment to providing top-notch service and tailored installations of commercial and industrial HVAC systems in Houston and surrounding areas. If you are dedicated, skilled, and eager to contribute to our continued success, we encourage you to apply and become a key player in our top-quality service delivery and customized installations. Job Overview: Custom Air Products & Services, Inc. is seeking a highly motivated and detail-oriented Estimator to join our growing team. As an estimator, you will be an integral part of our Sales and Service Department, contributing to the growth and efficiency of our operations. Your primary responsibility will be to assess, analyze, and estimate service repairs and maintenance contracts, ensuring accuracy and alignment with customer expectations and company standards. In this role, you will collaborate closely with our sales team, service technicians, and management to comprehensively understand project scopes and specifications. Your keen attention to detail and analytical skills will be crucial in producing detailed bid work sheets based on customer requirements, project complexities, and industry standards. Job Duties: Project Scope Analysis: • Engage in comprehensive discussions with sales personnel, service technicians, and management to thoroughly understand project scopes and specifications., • Leverage your expertise to produce meticulously detailed bid work sheets that encapsulate the intricacies of each project., • Undertake the responsibility of managing service projects from initiation to completion., • Employ analytical skills to compute costs associated with labor, materials, and time., • Proactively identify and resolve any discrepancies by collecting and analyzing pertinent information., • Collaborate closely with the sales and management teams to ensure that all estimates align with company standards and adhere to specific code requirements., • Demonstrate a commitment to ongoing professional development by attending educational workshops and staying abreast of industry trends., • Update essential documents, including "Master" bid sheets, parts order logs, and service call notes in the company's system., • Actively participate in weekly meetings with the Service Department management team., • Critical Thinking and Problem-Solving: Ability to analyze complex situations, identify challenges, and devise effective solutions., • Planning and Organizing: Strong organizational skills to manage multiple tasks and develop systematic plans., • Decision-Making: Make timely and informed decisions based on a thorough understanding of project requirements., • Effective Communication Skills: Clear and concise communication with internal teams, customers, and stakeholders., • Delegation: Efficiently delegate tasks for streamlined workflow and optimal resource utilization., • Teamwork: Seamless collaboration with cross-functional teams, fostering a positive team culture., • Minimum 5 years of estimating experience., • Knowledge in the HVAC industry We value our team members and offer competitive benefits, including: • 401K with company match, • Medical insurance, • Dental insurance, • Vision plan, • Prescription plan, • Health Savings Account, • Life insurance and disability coverage, • Paid Time Off If you have a strong work ethic, a commitment to excellence, and the desire to be part of a winning team, we invite you to apply and embark on a rewarding career with Custom Air Products & Services, Inc. Be part of a company that values your contributions and invests in your future. Apply now to take your career to new heights! Connect with Us: To learn more about Custom Air Products & Services, Inc., visit us on: • Facebook, • Twitter, • LinkedIn, • Our Website

Job Description Pay: $95,000.00 - $115,000.00 per year Company Overview Leading the industry in electrometrical components; dedicated to innovation and high-quality design. With fully automated production facilities, the organization has been serving the electronic control industry for over three decades, delivering reliable and high-performance products worldwide. Job Summary We are seeking a dynamic Component Application Engineer specializing in Low & Medium Voltage Power Distribution. In this role, you will drive system design, project management, and technical support for power distribution components. Your expertise will help optimize electrical systems, ensure seamless project execution, and contribute to innovative solutions in power distribution applications. You will serve as a technical authority—guiding customers through product selection, application design, system integration, and compliance with UL, IEC, and IEEE standards. If you’ve worked closely with switchgear, circuit protection, vacuum interrupters, and electromechanical protection systems, this role was designed for you. Responsibilities • Provide technical application support for LV and MV circuit breakers, vacuum interrupters, contactors and switchgear components, • Advise customers on proper product selection, protection coordination, and system design, • Support OEMs, panel builders, utilities, and switchgear engineering teams with integration, application review, and troubleshooting, • Interpret and apply applicable standards, including: UL 489, UL 508, IEC 60947, IEEE C37, • Lead or support application testing, validation, and customer qualification activities, • Collaborate cross-functionally with Engineering, Product Management, and Sales on new and existing product applications, • Prepare technical documentation, including application notes, data sheets, and customer-facing reports Experience Applicants must have direct experience with most of the following technologies: • Vacuum interrupters, • MCCB / MCB circuit breakers, • RCD / GFCI breakers, • DC circuit protection devices, • ATS systems or switch disconnectors, • IEC contactors / DP contactors, • Thermal overload relays Qualifications • Bachelor’s degree in Electrical Engineering or related field., • 5+ years of application engineering in LV/MV power distribution or switchgear., • Ability to interpret electrical schematics, protection curves, and coordination studies., • Understanding of arc interruption, trip unit behavior, and electromechanical protection mechanisms., • Reclosers or medium-voltage distribution equipment, • Utility or switchgear field experience, • Familiarity with EV/DC fast-charging protection requirements Job Type: Full-time Job Location: Remote in Texas Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceCompany DescriptionAn Electronic Parts Distribution Company in Automotive Industry.An Electronic Parts Distribution Company in Automotive Industry.

Job Description About the Role: As a Service Advisor at Houston Motorsports, you will serve as the primary liaison between customers and the service department, ensuring a seamless and positive experience throughout the vehicle maintenance and repair process. Your role is critical in accurately assessing customer needs, communicating service options, and coordinating with technicians to deliver timely and high-quality service. You will manage service appointments, provide detailed estimates, and keep customers informed about the status of their vehicles. By fostering trust and satisfaction, you will contribute to customer retention and the overall reputation of Houston Motorsporrts. Ultimately, your efforts will drive operational efficiency and support the business’s growth by enhancing customer service excellence. Minimum Qualifications: • Previous experience in a customer service role, preferably in automotive or powersports service advising., • Basic knowledge of vehicle maintenance and repair processes., • Strong communication and interpersonal skills., • Experience working in a powersports dealership or similar environment., • Familiarity with manufacturer service guidelines and warranty procedures, • Ability to read and interpret technical service manuals and repair orders., • Greet customers promptly and professionally, understanding their service needs and concerns., • Schedule and manage service appointments, ensuring optimal workflow for the service team., • Prepare accurate service estimates and explain recommended repairs or maintenance to customers., • Coordinate with technicians to monitor repair progress and update customers accordingly., • Maintain detailed records of customer interactions, service orders, and vehicle histories., • Handle customer inquiries and resolve any service-related issues to ensure satisfaction., • Promote additional services or products that meet customer needs and enhance their experience. The required skills enable the Service Advisor to effectively communicate complex technical information in an understandable manner, ensuring customers feel informed and confident about their service decisions. Strong interpersonal skills are essential for building rapport and trust, which directly impacts customer satisfaction and loyalty. Proficiency with service management software allows for efficient scheduling, record-keeping, and tracking of service orders, streamlining daily operations. Preferred skills such as technical knowledge and certification enhance the advisor’s ability to accurately assess service needs and provide expert recommendations. Additionally, bilingual abilities facilitate clear communication with a broader customer demographic, improving overall service accessibility and experience.

Job Description Now Hiring: Heavy Equipment Diesel Mechanic Boatman Industries, Inc. is seeking a highly skilled diesel mechanic with hands-on experience working on high pressure water pump equipment. Responsibilities will include the maintenance and repair of mechanical, electrical, hydraulic, and diesel systems on a variety of equipment. Location: Hobby Airport Area - 7355 Airport Blvd. Houston, TX 77061 Position Type: Full-Time Pay: Competitive, Based on Experience / We offer Full Benefits Package Key Responsibilities: • Diagnose, service, and repair high pressure water pumps, related hydraulic systems and diesel engines, • Troubleshoot and repair technical problems, • Interpret parts and service manuals in order to properly diagnose repairs needed as well as order appropriate parts, • Disassemble and reassemble engines and component parts, • Strong diesel mechanical background with direct experience in high pressure pumps, • Solid understanding of diesel engines, pressure testing, and troubleshooting, • Ability to communicate and interface effectively with personnel in and outside the organization, • Ability to read technical schematics and service manuals

Job Description Job Summary We are seeking a detail-oriented and experienced CNC Programmer / Machinist to program, set up, and operate CNC machines. This dual role requires expertise in both programming (CAD/CAM) and hands-on machining to produce precision parts to tight tolerances. Ideal candidates are problem-solvers who can take parts from print to production with minimal supervision. Key Responsibilities • Program CNC mills and/or lathes using Mastercam, Fusion 360, or other CAM software., • Set up machines, select appropriate tools, and load materials., • Operate CNC machinery to produce parts according to blueprints and specifications., • In-process inspection of finished parts using precision measuring instruments (e.g., calipers, micrometers, CMM)., • Adjust offsets and tooling as necessary to maintain tight tolerances., • Read and interpret technical drawings, GD&T, and CAD files., • Troubleshoot machining or programming issues and suggest improvements., • Maintain cleanliness and organization of work area and equipment. Required Qualifications • 3+ years of experience as a CNC Programmer with CAD/CAM software such as Mastercam (preferred), Fusion 360, etc., • CNC and manual machining experience (mills, lathes, grinders)., • Proficient with G-code, M-code, and CNC controls (e.g., Fanuc, Haas, Mazak, etc.)., • Ability to read and interpret engineering drawings and GD&T., • Understanding of machining various metals and materials (aluminum, stainless steel, etc.)., • Experience with fixturing, +/-.0002” tolerancing, machine process improvements., • Skilled in the use of measuring tools and inspection equipment., • Familiarity with lean manufacturing or continuous improvement., • Experience with 4-axis or 5-axis CNC machining. Company DescriptionCoastal Mechanics is a manufacturer of high-precision Aviation and Military custom components. We are dedicated to maintaining the highest standards of quality, and we recognize that our staff is our greatest asset. If you are a detail-oriented, organized, and experienced professional, we'd love to hear from you.Coastal Mechanics is a manufacturer of high-precision Aviation and Military custom components. We are dedicated to maintaining the highest standards of quality, and we recognize that our staff is our greatest asset. If you are a detail-oriented, organized, and experienced professional, we'd love to hear from you.

Job DescriptionDiesel Mechanic Job Description • Competitive pay $20.00 - $22.00 an hour DOE, • Temp to hire., • The position is in South Houston, • Monday-Friday 7:00 am-5:00 pm (Some Saturdays)Our client, one of the largest line pipe distributors in the United States is looking for a reliable Diesel Mechanic. Your New Role: As a Diesel Mechanic, repair and maintenance of forklift, heavy equipment, and trucks in accordance with factory and industry standards, run diagnostics where applicable, and work closely with other team members to meet company goals. What You Will Do:, • Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications., • Repair and replace damaged or worn parts., • Operate and inspect machines or heavy equipment to diagnose defects., • Diagnose faults or malfunctions to determine required repairs., • Dismantle and reassemble heavy equipment using hoists and hand tools., • Clean, lubricate, and perform other routine maintenance work on equipment and vehicles. What You Need:, • High School Diploma or GED, • 1 – 3 years of pipe yard and forklift experience, • Knowledge of Diesel Engine and Hydraulic Systems diagnostics and preventive maintenance., • Must be willing to work overtime as needed., • Regularly lift and/or move objects up to 50 lbs., • Must be able to pass pre-employment screenings. Your New Organization: Enjoy competitive compensation, health, vision, and dental insurance plans, and a 401(K) plan. Get paid weekly through direct deposit for every hour you work. When you partner with The Reserves Network, you get to work with experienced recruiters who will advise you on all aspects of your job search and career aspirations. Ready to take control of the way you work? Complete our application today and join The Reserves Network team, where your skills and contributions will be valued and rewarded. For additional information, call 281-724-4930. Your Career Partner: Veteran-founded and family-owned, The Reserves Network specializes in connecting exceptional talent with rewarding opportunities. With our extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. Please submit your application for consideration in this and other positions and gain exclusive access to our mobile app for job notifications.As an equal-opportunity employer, we value our employees and foster an environment of respect, integrity, and trust in every aspect of employment. However, you identify and whatever your background, we encourage you to apply today. #TRN705ZRCompany DescriptionThe Reserves Network is more than a staffing agency—we're a career partner. With a strong reputation for placing top talent across eight key specialties— Industrial & Manufacturing, Office & Professional, Accounting & Finance, Healthcare, Engineering, Executive & Management, Real Estate, and Information Technology—we prioritize your professional growth and job satisfaction. We offer personalized career guidance, access to exclusive job opportunities, and a supportive team dedicated to helping you reach your career goals. When you join The Reserves Network, you're not just filling a position; you're building a career with a company that values your skills and aspirations.The Reserves Network is more than a staffing agency—we're a career partner. With a strong reputation for placing top talent across eight key specialties— Industrial & Manufacturing, Office & Professional, Accounting & Finance, Healthcare, Engineering, Executive & Management, Real Estate, and Information Technology—we prioritize your professional growth and job satisfaction. We offer personalized career guidance, access to exclusive job opportunities, and a supportive team dedicated to helping you reach your career goals. When you join The Reserves Network, you're not just filling a position; you're building a career with a company that values your skills and aspirations.

Job Description Lighting Controls Department Scheduler Peterson Scharck & Associates (PSA) – Systems & Controls Team Location: Houston, TX (In-Office) Job Type: Full-Time The Role Peterson Scharck & Associates is seeking a highly organized, customer-centric Department Scheduler to join our Systems & Controls Team. This individual will serve as the primary point of contact for our clients and field technicians, ensuring that lighting controls commissioning projects move from the initial request to successful completion. If you are a detail-oriented professional who enjoys "puzzles"—aligning technician availability with project deadlines while maintaining top-tier customer service—this is the role for you. Key Responsibilities • Technician Coordination: Manage the daily and long-term calendars for our field technicians, optimizing travel and project hours for lighting controls commissioning., • Project Lifecycle Management: Follow every commissioning job through its entire lifecycle, ensuring no project "stalls" between the site visit and final sign-off., • Documentation Management: Gather, organize, and archive all project-related documentation, including startup reports, closeout photos, and commissioning logs., • Customer Relations: Serve as the professional voice of PSA, communicating scheduling updates, requirements, and project status to contractors and end-users., • Cross-Functional Support: Work closely with the Applications Specialists to ensure technicians have the necessary submittals and design intent documents prior to arriving on site. Required Skills & Qualifications • Customer Service Excellence: A proven track record of handling client requests with professionalism, empathy, and clarity., • Extreme Attention to Detail: Ability to manage multiple moving parts, deadlines, and documentation sets without losing accuracy., • Proactive Problem Solving: Ability to pivot schedules quickly when site conditions change or delays occur., • Communication Skills: Strong written and verbal communication for professional email correspondence and phone coordination., • Tech Savvy: Proficiency in standard office software and a quick learner of project management tools (e.g., Basecamp). Why PSA? We offer a fast-paced, collaborative work environment where your contributions directly impact the growth of our most exciting business segment. • Competitive Compensation: Commensurate with experience., • Comprehensive Benefits: Health/Dental insurance, 401k with match, and Life/Accident insurance., • Culture: A team-oriented sales environment that values reliability and self-motivation.Company DescriptionPeterson Scharck & Associates is a leading lighting and lighting controls manufacturer's sales representative located in Houston, TX. Our mission is to provide the best value in lighting and lighting controls systems solutions to the design and construction community in the greater Houston and Southeast Texas region. We do this by combining our industry leading architectural and commercial brands with the expertise and creative talent of our professional staff to transform our clients' challenges into practical and affordable solutions which achieve both design and performance intent.Peterson Scharck & Associates is a leading lighting and lighting controls manufacturer's sales representative located in Houston, TX. Our mission is to provide the best value in lighting and lighting controls systems solutions to the design and construction community in the greater Houston and Southeast Texas region. We do this by combining our industry leading architectural and commercial brands with the expertise and creative talent of our professional staff to transform our clients' challenges into practical and affordable solutions which achieve both design and performance intent.

Job Description About Sungrow: Sungrow North America is a leading provider of renewable energy solutions, specializing in the development and manufacturing of photovoltaic inverters and energy storage systems. The company offers a comprehensive range of products and services designed to optimize the performance and efficiency of solar power installations. Sungrow North America is known for its commitment to innovation, high-quality standards, and exceptional customer service, aiming to provide sustainable and reliable energy solutions to meet the growing demand for clean power. The Position: The Service Quotation Specialist is a key commercial support role within Sungrow’s Service organization, responsible for preparing and managing all out-of-warranty, out-of-scope, and non-standard service quotations for PV and BESS customers across North America. This role also leads warranty extension outreach, coordinates scoping with internal teams, and tracks customer follow-ups through PO and invoice completion. This position requires owning short-cycle aftermarket commercial activity, ensuring accurate pricing, proper coordination, and timely customer response. The role reports to the Service Commercial Lead and works closely with Field Service, Service Engineering, Service Operations, Spare Parts, Supply Chain, Finance/AR, and HQ. Essential Duties and Responsibilities: • Prepare and issue quotations for out-of-warranty service work, including labor, materials, and mobilization., • Coordinate with internal teams (Field Service, Service Engineering, Operations, Parts, Supply Chain, Finance, Legal) to confirm scope accuracy and pricing., • Conduct proactive outreach to customers nearing warranty expiration and provide warranty extension options and pricing., • Maintain organized tracking of all quotes, customer follow-ups, PO statuses, and related documentation., • Support accurate invoicing by ensuring proper handoff from quotation to execution and collaborating with Finance., • Follow up on Accounts Receivable for all invoices related to service work quoted by this role., • Maintain and update pricing templates, quote logs, cost references, and internal approval documentation., • Communicate with customers and Sungrow Headquarters as needed; Mandarin language ability preferred for HQ coordination., • Experience in aftermarket service quoting, field service support, or commercial operations (energy, electrical equipment, or industrial OEM experience preferred)., • Strong understanding of service workflows, field execution requirements, and cost drivers., • Excellent written and verbal communication skills., • Highly organized and detail-oriented, able to manage multiple time-sensitive requests., • Strong analytical and commercial thinking skills., • Bachelor’s degree in Business, Engineering, Economics, or related field., • 2–5 years experience in a commercial, service, or technical operations role., • Proactive, customer-focused, and able to work with minimal supervision., • Contract role based out of Houston, TX, • Compensation commensurate with experience, • Competitive benefits package and employee programs Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job DescriptionGopuff is looking for Operations Associates (OAs) to join the operations team. Directly reporting to a Site Leader, OAs play an essential role at Gopuff that requires drive, perseverance, positivity, and enthusiasm for the challenge. You will accomplish a variety of operations responsibilities including picking, packing, receiving product both within our site and accompanying kitchen (if applicable), and working with our partner drivers. Customers turn to Gopuff to provide their everyday essentials—day and night, rain or shine. We're assembling a team of thinkers, dreamers and risk takers who are ready to help us reshape the world of retail faster than ever before. And it doesn't hurt if you like snacks. Responsibilities: -Pick and pack items for dispatch to customers-Receive and unpack pallets of product from vendors, ensure physical inventory count matches purchase order/invoice, and resolve discrepancies-Manage inventory and re-shelving of canceled orders-Clean and organize sales floor and overall facility-Manage waste and spoilage through strict compliance with FIFO practice-Contact customer for substituted or out-of-stock items-Handle, scan and move product in a safe and well-organized manner-Stand, push, pull, squat, bend, reach and walk during shifts-Use carts, pallet jacks, dollies and other equipment to move product-Handle products that may contain tobacco, nicotine, and/or alcohol-Work in freezer locations periodically throughout shifts-Capability to walk several flights of steps periodically throughout the day-Prepare quality beverages and food menu items for all customers by observing all recipes and presentation standards-Ensure accuracy of all food and beverage packaged for delivery-Follow health, safety and sanitation guidelines for all products-Receive and put away order/invoice, and resolve discrepancies when they do not match expiration requirements-Maintain Kitchen Facility organization and standards to ensure resources can be accessed while managing waste and spoilage through mindful pouring and food preparation-Prepare, package and stage/handoff orders Qualifications:-High School Diploma or GED Equivalent-Experience working in a restaurant or retail environment (preferred, not required)-The ability to work a fluid schedule and be available during peak shifts (1st, 2nd, 3rd shifts)-General working knowledge of basic web-based software applications (e.g. Google G-Suite)-Stand and walk for the duration of an assigned shift-Lift up to 49 pounds-Available to work flexible hours that may include mornings, evenings, weekends, nights and holidays #LI-DNPWhat We Offer • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees

Job DescriptionPosition: Materials Manager Report: Sen. Director, Operations, Head of HSD (APD) Div Department: Materials Location: Houston or relocation as required Main job function 1. INVENTORY CONTROL: The Materials Manager will be responsible for the BU raw material Inventory level and the aging inventory performance aligned with the BU directives. The Materials Manager will be responsible for inventory target setting and achieving those targets by working together with all relevant departments to ensure the effective controls that exist within all areas of the BU, 2. MATERIALS SUPPLY and PLANNING: The Materials Manager will be responsible for ensuring that sufficient Materials are ordered aligned with requirements generated by the MRP to allow the business to function based on the customer demands and forecasts. In the case of Excess /Obsolete materials exposures, it will be the Materials manager’s responsibility to ensure that all is done to eliminate any exposures to the BU in a timely manner. Materials shortage management, forecast/commit process, and related activities and processes., 3. SUPPLIER SELECTION: The Materials Manager will be responsible for ensuring that all suppliers to BU are of business legitimacy, they are not listed on any applicable government's prohibited parties lists, and suppliers must have the required valid certifications. The Materials Manager needs to manage the Supplier's business screen and Supplier performance scorecards annually, 4. Key Performance Indicators: The Materials manager’s responsibility is to ensure that KPI (Key Performance Indicators) are all set, they are followed up and results are aligned with the expectations to eliminate any exposures to the BU in a timely manner, 5. IQL: In the case of problematic suppliers’ invoices (IQL), it will be the Materials manager’s responsibility to ensure that all is done to eliminate any exposures to the BU in a timely manner, 6. Projecte and NPI: In the case New Product Implementation (NPI) it will be the Materials manager’s responsibility to ensure that all purchasing activities related to NPI parts are actioned in a timely manner to eliminate exposures to the BU The Material Manager must provide professional support all ongoing and new projects when it required by management of the BU. Duties and Responsibilities (Including but not limited to...) 1. DISPOSALS: The Materials Manager is responsible for ensuring that the supply of Materials is available on the shop floor to allow for continuous production., 2. FORECAST: The Materials Manager will be responsible for managing component forecast with suppliers, PO placement, and inventory levels to meet with BU demand., 3. COMMUNICATION: The Materials Manager will be responsible for establishing and maintaining effective communications with all members of the Materials group, ensuring that all employees are aware of all issues within the Group, BU, and the Factory., 4. TEAMWORK: The Materials Manager will, as part of the site Management team, be required to act as a good team member, being aware of all business issues affecting the company at any point in time. In certain circumstances, the Materials Manager may be required to deputise for another staff member or the Plant Manager in both an Internal and/or External capacity. The Materials Manager will be required to participate during customer visits and presentations., 5. APPRAISALS: The Materials Manager will be responsible for administering the agreed structured appraisal system for all employees within the Materials Group. This will be the basis for assessing an employee’s overall performance and the subsequent salary increases and /or promotions that may result. It will also be required to conduct both Training Needs Analysis and Succession Planning, and to ensure ongoing Employee Development., 6. MEASUREMENTS: The Materials Manager will be responsible for the following measurements: • FORECAST COVERAGE, • MATERIAL SHORTAGES, • RAW MATERIAL INVENTORY AND AGING INVENTORY, • Degree or Diploma in a relevant discipline., • Must have at least two years of experience in management and five years of experience in Materials, preferably within the high volume manufacturing and ISO/QS knowledge.First priority skills, • General skills: good communication, presentation, verbal, managerial, logical, organizing & problem-solving skills, • Must be able to work independently and in a team, to think visually, to be responsible for others' work. Must be with high endurance, technically oriented, to be able to do the job precisely, and to be able to prioritise, • Must have a good command of written and spoken English., • Must be an advanced user of Word, Excel PC software, • Must have, ISO 9001, QS9000, ISO 14001 knowledge. Must have FMEA, APQP, QSA, MSA, and SPC knowledge.Secondary skills, • Should have analytical skills., • Should have knowledge of MRP / ERP systems., • Should be an effective team player., • Should be able to communicate to large groups and executives comfortably., • Must be flexible with respect to work schedule and location., • Should possess a current clean driving license. vjhldKQ9h4

Job Description About Us McMillan James Equipment Company (MJEC) is a manufacturers’ representative offering commercial HVAC, plumbing, hydronics, and controls equipment — plus expert service, start-up support, and a complete range of OEM and aftermarket parts across Texas and beyond. We tackle complex challenges with creative solutions, always guided by honesty, integrity, and transparency — because doing what’s right matters, even when it’s not the easiest path. The Opportunity We’re always interested in connecting with talented professionals in Building Automation and Controls. Whether you’re an experienced technician, programmer, or project specialist, we’d love to learn more about your background for future openings within our Building Automation team. Possible Roles May Include: * BAS Field Technicians (Levels I–III) * BAS Programmers * Project Engineers or Coordinators * Controls Specialists Who You Are You have a knack for problem-solving, an eye for technical detail, and a drive to deliver high-quality work. You enjoy collaborating with project managers, engineers, and contractors to bring smart building systems to life. Why MJEC You’ll be part of a team that values innovation, expertise, and doing the job right the first time. MJEC offers opportunities for professional development, on-the-job learning, and career growth within a forward-thinking, collaborative culture. Interested? Apply here to be considered for future Building Automation & Controls openings. We’ll review your background as new roles become available.

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. DCI is searching for a dynamic Vice President of Procurement/Chief Procurement Officer (CPO) to lead all purchasing activities, strategic sourcing, and vendor relationships to drive cost efficiency, supply chain stability, and alignment with corporate goals. Position is located in either Tampa, FL or Houston, TX Position Responsibilities: • Sets DCI’s procurement vision, category/vendor strategies, and goals/objectives in alignment with those from the three core business units, • Collaborate, support, and drive alignment with site-level operational leaders to ensure long-term buy-in and compliance with sourcing programs, • Partner and provide support to all sites to deploy necessary buying tools, policies, central buying support, reporting and best practices to drive savings and ensure supply of needed services and materials, • Accountable for delivering procurement-driven EBITDA improvement in line with value creation plan, • Build the capabilities of the DCI procurement function, upskill staff, and identify tools, analytics and gaps needed to effectively serve DCI business units; continuously assess team for improvement and professional growth, • Develop aggressive strategic sourcing strategies across all categories, including defining specific roadmaps of actions with milestones, • Lead execution of strategic sourcing fundamentals (e.g., category strategies, competitive RFPs, regional sourcing, supplier consolidation, long-term contracts, etc.) and partner with procurement staff to drive broader sourcing actions (e.g., e-Auctions, P2P catalogs, value engineering, etc.), • Determine compliance processes and KPIs with the business once suppliers are selected and contracts negotiated, • Monitors KPIs / performance measurements and addresses supplier non-performance, DCI non-compliance and procurement service level issues, • Partner with finance and business leaders to ensure savings capture, compliance, tracking and retention, • Build effective relationships with key supplier executives as well as peers in the industry, • Partner with DCI operations to resolve constrained and late delivery issues, • Develops and manages central procurement organization budget, • Establishes communication plans regarding procurement activities, • 15+ years of experience with 10+ years’ experience as a procurement and/or supply chain business leader with successful track record of procurement-driven EBITDA impact, • International experience beneficial, • Robust knowledge of how to leverage A.I., • Exposure and familiarity with infrastructure, chemical and logistics industries; experience with PE-backed firms is beneficial, • Familiarity with maintenance, fleet, facilities, parts, chemicals, indirect and capex spend, • Expertise in negotiations and managing complex contractual arrangements, • Demonstrated expertise in procurement processes and systems, e.g., P2P, spend analytics, etc., • Strong organizational building and leadership skills, • Strong interpersonal and communication skills; ability to work effectively across business units, • 401(k) with generous employer match, • Medical, Dental and Vision Insurance, • Paid Time Off, • 10 Paid Holidays, • Short and Long Term Disability Insurance, • Tuition Reimbursement, • Parental Leave

Job Description ReviveRX is the premier licensed pharmacy specializing in health, wellness, and restorative medicine. We focus on treating the source, not just the symptoms, utilizing industry-leading technology. Collaborating with innovative pharmacists, healthcare providers, and pharmaceutical manufacturers, we provide personalized care. Our mission is to optimize treatment, revolutionize healthcare, and empower individuals to live vibrant lives. We welcome you to join us in our commitment to holistic wellness and personalized medicine. Position Summary The Vice President of Quality is responsible for establishing, leading, and continuously elevating the company's overall quality and regulatory compliance. This executive role holds accountability for the integrity of ReviveRx's Quality Management System (QMS), encompassing quality assurance, quality control, document and record control, complaint management, and incoming quality. The VP of Quality serves as a primary steward of patient safety and product quality, ensuring that all compounded preparations are produced, tested, and distributed in full compliance with applicable USP Standards, State and Federal laws and regulations. This role is a highly visible executive position requiring daily interaction with C-Suite executives, cross-functional operational leaders, and the broader quality leadership team. The VP of Quality is expected to be both a strategic visionary and a hands-on leader - someone who can set the direction for where the quality organization needs to go while simultaneously driving execution and accountability across the team. Key Responsibilities Quality Strategy & Organizational Leadership • Set the strategic vision, direction, and roadmap for ReviveRx's entire quality organization — encompassing Quality Assurance, Quality Control, Document/Record Control, Incoming Quality, and Complaint Management functions, • Serve as one of the most senior quality voices within the organization, advising the CQO and other C-Suite executives on quality risk, compliance posture, and quality strategy, and overall strategic quality investment priorities, • Build, lead, mentor, and develop a high-performing quality leadership team, leading and overseeing a team of quality assurance and quality control professionals, • Partner with operational leadership and executive leadership to foster and institutionalize a self-sustaining quality culture throughout the organization, • Drive the evolution of ReviveRx's quality organization from its current state to a best-in-class compounding quality function capable of supporting significant operational scale, • Own and be accountable for the design, implementation, maintenance, and continual improvement of ReviveRx's Quality Management System, • Ensure the QMS is fully compliant with all applicable USP Standards, • Provide executive oversight of all core QMS elements: CAPA management, deviation and nonconformance management, change control, document and record control, complaint management, incoming quality, batch record review, and supplier quality, • Ensure adequate escalation pathways, management review cadences, and quality metrics/KPIs are in place to provide real-time visibility into quality system health, • Drive the selection, implementation, and optimization of electronic Quality Management System (eQMS) platforms to support operational scale and inspection readiness, • Serve as ReviveRx's senior representative during FDA, state board of pharmacy, and other regulatory inspections, • Collaborate closely with Regulatory Affairs personnel to ensure the Quality Unit stays apprised of, acts upon and implements (i.e., ensures compliance and quality) with all applicable state licensure requirements, • Works closely with the CQO and other C-Suite executives on any/all communications with the FDA, and other regulatory bodies, • Assists, as needed, the Regulatory Affairs function, with quality related matters with any/all Form FDA 483 observations, Warning Letter, and state board deficiency citations, • Provide strategic leadership and executive oversight for nonconformances, associated investigations, root cause analysis, risk assessments and other associated problem management processes and tools across the organization, • Ensure all CAPAs, investigations, nonconformances, and remediatory actions are recorded, tracked, completed, and verified for effectiveness within committed timelines, • Hold quality and operational leadership accountable for timely closure of open quality events, aging CAPAs, and overdue investigations, • Ensure adequate trending of quality metrics/potential systemic quality issues, drive proactive potential assessment and risk, • Oversee ReviveRx's complaint management program, ensuring all product and service complaints are properly logged, tracked, trended, and acted upon, • Ensure the organization has robust processes for evaluating adverse events, determining appropriate regulatory reporting obligations, and escalating serious patient safety concerns, • Partner with the Complaint Coordinator and operational leadership to drive timely, thorough, and compliant resolution of all customer complaints, • Provide executive oversight of ReviveRx's Quality Control function, including all analytical and microbiological testing programs, environmental monitoring, stability programs, and third-party contract laboratory management, • Partner with the leadership of the QC function on laboratory startup strategy, design, and operationalization of ReviveRx's internal testing capabilities, • Ensure QC operations are inspection-ready, scientifically sound, and have integrity in all data, and utilize practices that stay compliant with all applicable USP Standards and State and Federal regulations, • Partner closely with operations, compounding, dispensing, supply chain, procurement, facilities, and regulatory affairs leadership to ensure quality is embedded across all operational processes, • Provide strategic quality guidance during new product introductions, process changes, facility expansions, and technology transfers, • Serve as a constructive but uncompromising quality partner to operational teams — maintaining quality independence while supporting operational success, • Lead change management initiatives to implement new quality systems, processes, and cultural expectations across the organization, • Recruit, develop, and retain top quality talent across all levels of the quality organization, • Build organizational capability in quality science, regulatory knowledge, investigation techniques, and continuous improvement methodologies, • Establish mentoring and development programs to grow the next generation of quality leaders within ReviveRX, • Create a high-accountability, high-support quality culture where team members are empowered to raise issues, solve problems, and drive improvements/improved outcomes, • Bachelor's degree in Pharmaceutical Sciences, Chemistry, Life Sciences, Engineering, or related technical field, • 15+ years of progressive experience within the pharmaceutical and/or compounding industry, • Minimum 7-10 years in senior quality leadership roles with direct P&L or budget accountability, • Demonstrated experience owning regulatory inspection strategy and serving as the primary senior quality representative during FDA and/or state board inspections, • Proven track record of successfully managing regulatory observations, Warning Letters, 483s, or state board deficiencies, • Demonstrated experience building, scaling, and leading quality organizations in growth-stage or highly regulated environments, • Track record of successful senior executive-level collaboration and influence, • Deep knowledge of applicable USP Standards (USP <797>, <795>, <800>, <1163>) as well as all applicable State and Federal laws and regulations, • Comprehensive understanding of QMS design and management aligned with ICH Q10, • Expertise in CAPA systems, deviation management, complaint handling, change control, and document control, • Deep understanding of Good Manufacturing Practices (GMP) and Good Documentation Practices (GDPs), • Exceptional executive leadership with the proven ability to coach, mentor, inspire, and develop quality leaders and teams at all levels, • Advanced degree (MS, PhD, PharmD, MBA), • Six Sigma certification (Green Belt or higher), • PMP or equivalent project management certification, • Direct experience with sterile and/or non-sterile compounding, pharmaceutical manufacturing, or specialty pharmaceutical operations, • Primarily in a professional office setting within a regulated pharmaceutical compounding facility, • Frequent presence on the production floor and in cleanroom/controlled environments, • Fast-paced, highly regulated, and deadline-driven, requiring the ability to manage competing priorities while maintaining rigorous attention to detail, • Regular exposure to pharmaceutical compounding areas, including cleanrooms and sterile manufacturing zones, may occur, • Flexibility in working hours to accommodate regulatory inspection schedules, audit preparation activities, and executive-level business needs, • Occasional travel may be required for regulatory agency meetings, vendor audits, industry conferences, or multi-site oversight activities, • Ability to sit for extended periods while performing administrative, analytical, and computer-based tasks, • Ability to stand and walk for extended periods during floor audits, inspections, and facility walkthroughs, • Occasionally required to gown and enter cleanroom or controlled environments in accordance with applicable SOPs and USP standards, • Competitive salary, • Comprehensive health, dental, and vision insurance, • 401k with employer match, • Paid Time Off

Job DescriptionAs our Project Safety Assistant, you will play a key role in supporting field safety efforts across our construction projects. You will assist project teams with daily inspections, documentation, training support, and hazard‑prevention activities to help maintain safe, well‑organized, and compliant job sites. You will work closely with superintendents, project managers, trade partners, and field crews to identify hazards, support corrective actions, maintain safety records, and reinforce company and OSHA requirements. This role is hands‑on and field‑focused, requiring strong communication, attention to detail, and a proactive mindset in dynamic construction environments. Experienced Project Safety Assistants may take on greater responsibility in conducting safety talks, leading portions of site orientations, aiding incident investigations, and contributing to continuous improvement in project safety culture. Successful team members in this role are observant, dependable, eager to learn, and committed to promoting a safe and productive jobsite for everyone involved.Your Skills • Safety Support & Field Presence, • Hazard Identification & Reporting, • Regulatory Awareness, • Safety Documentation & Recordkeeping, • Training & Orientation Support, • Communication & Collaboration, • Problem‑Solving & Situational Awareness, • Organization & Time Management, • Eagerness to Learn & GrowYour Skills, • Some experience in construction, safety, or related field preferred, but strong candidates with high motivation and willingness to learn are encouraged to apply., • Basic understanding of construction activities and typical jobsite hazards., • OSHA 30 preferred., • Strong communication and documentation skills., • Ability to work in a fast‑paced field environment and support multiple jobsite needs., • Ability to walk job sites, observe work, and support safety tasks throughout the day., • Bachelor’s degree in occupational health and safety or related field is a plus.Total Rewards, • Employee ownership, • Competitive pay, • Profit sharing, • Career development and continuing education assistance, • Generous PTO after a full year of service, • 401(k) with 6% match (traditional and Roth), • Medical, dental and vision insurance with free eligible medications through Rx ‘n Go, • Health Savings Account (HSA) with SpawGlass contribution

Job DescriptionSunbelt Supply is a global provider of flow control solutions. We maintain one of the largest and most diversified selections of valves, actuators, actuation accessories and specialty PFF in North America, comprised of more than 50 major manufacturers. We provide in-house valve automation services, including CAD design and drawings, machine, fabrication, assembly shops featuring CNC machinery, and automation repair work. Sunbelt Supply is a subsidiary of FloWorks International LLC, which is a privately held company located in Houston, Texas. Job Information: The Director, Strategic Sourcing – Sunbelt is responsible for leading sourcing strategy, manufacturer selection, and commercial negotiations across assigned product categories. This role partners closely with Sales leadership to support growth initiatives and works with Inventory Management to inform stocking and working capital decisions. The role directly manages Strategic Sourcing Specialists and serves as the primary commercial owner of sourcing outcomes. Key Responsibilities: • Lead multi-line manufacturer selection, negotiation, and strategic sourcing decisions, • Build and maintain senior-level strategic supplier relationships, • Lead and manage assigned personnel to support operational and strategic objectives, • Align sales teams to broader sourcing strategies including partnering with key account teams on AML considerations, • Partner with Inventory Management to build business cases supporting inventory decisions, • Coordinates with and supports Capital Projects teams to ensure alignment between project bids and overall sourcing strategy, • Facilitate cross-selling and cross-business-unit sourcing efforts, • Drive measurable cost improvements while supporting service and availability goals, • Bachelor’s degree required; Supply Chain, Business, or related field preferred, • 7+ years of experience in strategic sourcing or procurement, • Strong background in industrial distribution, flow control, or MRO environments, • Demonstrated negotiation, commercial acumen, and executive presence This role operates in a professional office environment with flexibility for hybrid work. Standard office equipment such as computers, phones, and printers are used. Occasional visits to warehouses or operational sites may be required and 30% travel is required. Physical Demands This role may require standing, walking, sitting, and frequent use of hands and fingers. Occasional lifting up to 25 pounds may be required. This role may involve exposure to warehouse environments, moving mechanical parts, and moderate noise levels during site visits. The Perks of Working Here FloWorks offers a competitive benefits package designed to support your health, financial well-being, and work-life balance. Highlights include: • Medical, Dental & Vision Insurance with multiple plan options, • Company-paid Life and Disability Insurance, • 401(k) with company match, • Health Savings & Flexible Spending Accounts, • Supplemental coverage (Accident, Critical Illness, Hospital Indemnity), • Employee Assistance Program (includes 3 free counseling sessions) This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. Committed to fostering a culture where every individual is valued and empowered to contribute to shared success. FloWorks participates in the US Government’s E-Verify program.

Job DescriptionDescription: Job Title: Process Engineering Technician Classification: Full-time, Hourly Non-Exempt Reports To: Production Supervisor Location: Kymera – CASL Houston and Thermal Spray Solutions Locations (Travel Required) ABOUT THE COMPANY: Kymera International is a leading global producer of specialty metal powders, pastes, and granules, catering to industries such as aerospace, defense, automotive, and electronics. Our mission is to drive innovation while adhering to the highest standards of sustainability, operational excellence, and ethical business practices. We are committed to continuous improvement and regulatory compliance on a global scale. Job Overview: The Thermal Spray Process Technician is responsible for supporting daily operations in the thermal spray shop through expert equipment operation, process development, and technical leadership. This role combines hands-on production responsibilities with equipment maintenance, operator training, and continuous improvement initiatives to support quality, safety, and production goals. The Thermal Spray Process Technician serves as a technical resource for operators, engineers, and leadership to ensure consistent, repeatable, and high-quality coating processes. Duties and Responsibilities: Thermal Spray Operations • Operate, monitor, and troubleshoot thermal spray consoles and related equipment to ensure consistent coating application., • Set up spray parameters and assist with programming for new and existing parts to meet customer and engineering requirements., • Verify process adherence, spray parameters, and documentation during production runs., • Lead development of new spray processes for parts that are new to the shop, including trials, validation, and documentation., • Work with departments including Engineering, Quality, and Production to establish spray programs, part routing, and quality requirements., • Drive process improvements to increase throughput, reduce scrap, improve coating quality, and enhance process repeatability., • Perform routine maintenance and minor repairs on shop and spray equipment to ensure safe and reliable operation., • Identify equipment issues and coordinate external service or support when needed., • Assist with tooling concepts and basic toolmaking activities to support production and process development needs., • Support scheduling, workflow management, and maintaining a clean, organized, and safe work area., • Serve as a technical point of contact for operators and supervisors on thermal spray processes and equipment., • Train operators on thermal spray equipment operation, safety requirements, and best practices. At Kymera International - we provide a competitive benefits package to support your health, well-being, and financial security, including: • Generous Time Off: 11 annual company-paid holidays and flexible PTO., • Healthcare Savings: Flexible Spending Accounts (FSA), Health Savings Accounts (HSA), and comprehensive dental and vision coverage., • Retirement Support: 401(k) plan with a competitive company match., • Insurance Coverage: Company-paid short-term disability and life insurance, with additional voluntary options like critical illness, hospital care, and long-term disability coverage., • Competitive pay., • Strong technical understanding of thermal spray processes, equipment, and materials., • Mechanical aptitude with the ability to troubleshoot equipment and process issues., • Ability to read and interpret engineering drawings, specifications, and work instructions., • Strong communication skills with the ability to train and support operators effectively., • Attention to detail and commitment to safety, quality, and continuous improvement., • Ability to work independently and collaboratively in a production environment., • Proven ability to enforce and uphold quality standards, with a strong attention to detail and a working knowledge of quality control processes and inspection procedures., • Strong knowledge of safety procedures, PPE usage, and work in regulated environments and commitment to assisting in leading and maintaining a safe and efficient work environment., • Reliability and ability to lead by example with excellent attendance and punctuality., • Ability to adapt to change and maintain flexibility to changes in workload and responsibilities., • Ability to travel up to 25%, • Possess and maintain a valid US Passport, • Eligibility for employment in US., • Associate degree or technical training in manufacturing, engineering, or related field preferred, or equivalent experience., • Minimum 3 years of HVOF thermal spray process experience, including knowledge of materials and processes., • Prior experience in a thermal spray, coating, machining, or similar manufacturing environment required., • Ability to stand, walk, and perform repetitive manual tasks for extended periods., • Strength to lift, carry, push, or pull up to 50 pounds unassisted., • Capability to perform physical tasks such as bending, kneeling, crouching, and reaching., • Coordination and manual dexterity to safely operate machinery, tools, and equipment while maintaining focus on ergonomics and safety., • Ability to work safely in environments with potential exposure to dust, fumes, and noise.

Job Description At Rodney Hunt, we are problem-solvers, focused on a common purpose: solving flow control challenges of the water & wastewater industry. As a global technology and engineering leader, we provide solutions for customers in industrial and municipal markets. Job Overview: The Aftermarket Sales Assistant provides administrative and operational support for the company’s aftermarket sales and service functions. Working under the direction of the aftermarket and sales teams, this role helps facilitate customer requests, prepare documentation, and assist with order processing for gates and water control systems. The ideal candidate is detail‑oriented, service‑minded, and eager to support internal teams in delivering high‑quality aftermarket products and services. Key Responsibilities: • Coordinate aftermarket sales orders including spare parts, repair kits, upgrades, and maintenance services for water control gate products., • Communicate with customers, sales representatives, production, and service teams to ensure order accuracy, scheduling, and timely fulfillment., • Manage inventory levels of critical spare parts and coordinate replenishment with procurement and warehouse teams., • Review engineering drawings to ensure accuracy, compliance with standards, and adherence to client requirements to generate quotes, • Collaborate with design engineers, drafters, and other stakeholders to resolve discrepancies, clarify design requirements, and ensure alignment with client objectives., • Process warranty claims and coordinate with customers and service teams to resolve issues in compliance with company policies., • Maintain detailed records of aftermarket orders, service requests, and customer interactions in CRM and ERP systems., • Assist in preparing quotes and proposals for aftermarket parts and services in collaboration with sales and estimating teams., • Track and report on aftermarket sales metrics, customer satisfaction, and service response times., • Support logistics related to shipping and delivery of aftermarket parts and equipment., • Collaborate with technical teams to stay informed about product updates, service bulletins, and aftermarket support programs., • Bachelor’s degree in Business, Supply Chain, Engineering, or related field preferred; equivalent experience considered., • 1 - 3 years of experience in aftermarket sales coordination, customer service, or supply chain support in a manufacturing or industrial environment., • Basic understanding of drafting standards, GD&T, or mechanical components is required., • Knowledge of water control systems, mechanical equipment, or heavy industrial products preferred., • Proficient in ERP and CRM systems (e.g., NetSuite, Salesforce) and Microsoft Office Suite., • Strong organizational, communication, and problem-solving skills., • Experience working in gate manufacturing, water infrastructure, or related industries., • Familiarity with warranty claim processes and aftermarket service best practices., • Primarily office-based with occasional visits to production or warehouse areas., • Standard office environment with some periods of sitting, standing, and computer work.

Job DescriptionPosition Summary The Quality Assurance Supervisor is responsible for leading and maintaining the Quality Management System (QMS), ensuring compliance with customer, regulatory, and internal requirements. This role drives a preventive quality culture, supports operational excellence, and ensures consistent execution of quality processes across SMT/EMS manufacturing operations. It is responsible of supervise the quality portion for NPI & Change Management, for ensuring end-to-end quality readiness for new product introductions and engineering changes, driving a holistic, system-based approach across design, process development, supply chain, and manufacturing execution. Key Responsibilities 1. Quality Systems Management • Ensure compliance with QMS standards (e.g., ISO 9001, IPC standards, customer-specific requirements), • Maintain and improve procedures, work instructions, and control plans, • Drive standardization across production lines and processes 2. Process Assurance & Compliance, • Monitor adherence to defined manufacturing processes (SMT, assembly, test), • Ensure proper implementation of:, • PFMEA and Control Plans, • ESD controls and handling requirements, • Traceability and serialization systems, • Enforce layered process audits (LPA) 3. Defect Prevention & Continuous Improvement, • Lead root cause analysis using structured methodologies (8D, 5 Whys, Fishbone), • Drive corrective and preventive actions (CAPA), • Partner with Industrial Engineering and Production to reduce defects:, • Solder defects (bridging, tombstoning, insufficient solder), • Assembly and test escapes, • Promote a zero-defect mindset across teams 4. Quality Performance Management, • Track and report key KPIs:, • First Pass Yield (FPY), • DPPM (Defective Parts Per Million), • Scrap and rework rates, • Customer complaints and returns, • Analyze trends and trigger improvement actions, • Provide regular reporting to plant leadership 5. Team Leadership & Development, • Supervise and develop Quality Engineers, Technicians, and Inspectors, • Define roles, responsibilities, and performance expectations, • Provide coaching and technical guidance, • Ensure adequate staffing and training coverage 6. Customer & Supplier Quality Interface, • Act as liaison between customer quality teams and internal operations, • Support customer audits and business reviews, • Ensure timely and effective response to customer complaints (8D reports), • Collaborate with Supplier Quality on incoming issues impacting production 7. New Product Introduction (NPI) Support, • Ensure quality readiness for new product launches, • Participate in design and process reviews, • Validate inspection and test strategies (AOI, ICT, FCT), • Approve first article inspections (FAI) and pilot builds 8. Documentation & Data Management, • Ensure accurate and timely documentation of quality records, • Maintain defect databases and lessons learned, • Bachelor’s degree in Engineering (Industrial, Manufacturing, Electronics, or related field) preferred Experience, • 3–7 years of experience in Quality within SMT/EMS or electronics manufacturing, • Prior supervisory or leadership experience preferred (Engineers, Technicians)Technical Skills, • Strong knowledge of:, • SMT processes and electronics manufacturing, • IPC standards (IPC-A-610, J-STD-001), • Quality tools (8D, PFMEA, SPC, MSA), • Experience with inspection technologies (AOI, SPI, AXI, ICT, FCT). 1vzgpJrJRo

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE The Manager, Financial Planning & Analysis (FP&A) plays a strong role in supporting the financial planning and strategic initiatives of the Rio Grande LNG (RGLNG) project and NextDecade. The Manager, FP&A is responsible for leading critical processes including elements of the RGLNG and NextDecade annual budgeting process, construction budget management, and supporting ongoing system implementation of FP&A platforms. This role will partner with business teams to analyze and provide insights on monthly performance and support strategic initiatives.KEY RESPONSIBILITIES: • Own elements of the annual operating budget and plan process including assumptions, data gathering, consolidation, comparative analysis, and plan drafting and review, • Responsible for monthly actual vs budget analysis and commentary for NextDecade and RGLNG budgets, • Build, maintain and oversee advanced Excel models to support financial forecasting and scenario planning, • Support expanded reporting and analysis related to growth and development of organization through transition to operations, • Participate in FP&A and Accounting system implementation and maintenance, as needed, including continuous improvements and enhanced functionality as applicable, ensuring data integrity and consistency across financial systems and reporting tools, • Partner with department heads and senior leadership to support strategic decision-making, • Prepare and present financial analyses, reports, and executive and Board-level presentations, • Prepare ad-hoc analysis as applicable, • Mentor and/or manage FP&A AnalystsREQUIREMENTS:, • 6+ years of progressive FP&A, Finance, Accounting, Consulting, Corporate Development, or Economic Planning experience, preferably within the Energy sector., • Strong background in financial modeling, • Experience in project management or team leadership, • Experience implementing or managing FP&A systems is a plus, • LNG industry experience is a plus, • Strong understanding of financial systems architecture and integration, • Excellent communication skills, with the ability to translate complex financial data into actionable insights, • Highly organized, detail-oriented, and capable of managing multiple priorities in a fast-paced environment, • Experience with SAP, planning tools (e.g., OneStream, Anaplan or similar platform), and/or PowerBI preferred, • Comfortable working independently and collaboratively across teams

Job Description Position Title: Software Product Manager Location: Houston, Texas Employment Type: [Full-time] About Us Polymaker is a global leader in high-quality 3D printing materials and solutions, dedicated to pushing the boundaries of additive manufacturing. Our innovative spirit drives us to create products and tools that empower designers, engineers, and manufacturers worldwide. We’re now expanding our ecosystem with a new, cutting-edge software solution — and we’re looking for an experienced Software Product Manager to lead this project from vision to launch. Role Overview As a Software Product Manager at Polymaker, you will define, develop, and launch a next-generation web-based tool that empowers users to visualize and choose Polymaker materials. You will own the product vision and roadmap, working closely with a small team of developers to ensure that the software delivers outstanding performance, usability, and value. You’ll balance technical requirements with user experience and business goals, ensuring our new platform meets the needs of the 3D printing community. Key Responsibilities • Define and communicate a clear product vision, roadmap, and strategy, aligned with market and user needs., • Translate complex customer and market requirements into actionable product specifications, user stories, and priorities., • Lead the end-to-end product development cycle, ensuring timely delivery and high-quality execution., • Oversee and coordinate a small team of developers working on front-end, back-end, and rendering pipeline tasks., • Evaluate and make critical decisions on software architecture, server infrastructure, and deployment strategies., • Research and understand customer segments, usage patterns, and pain points to guide design and feature development., • Shape the business model and monetization strategy for the software solution., • Develop plans for testing, beta releases, feedback loops, and iterative improvements., • Serve as the bridge between technical development, user experience, and business stakeholders., • Ensure best practices in security, file handling, and rendering performance for high-fidelity 3D visualization. Qualifications • Proven experience managing browser-based software products from concept to launch., • Strong understanding of software architecture, web infrastructure, servers, and deployment pipelines., • Working knowledge of 3D file formats (e.g., STL), 3D rendering engines, and basics of slicing or print preparation workflows., • Ability to balance technical details with strategic business thinking and user experience design., • Experience managing a small team of developers, including planning, prioritizing, and reviewing deliverables., • Excellent project management and organizational skills; familiarity with agile methodologies., • Strong analytical and problem-solving skills, with the ability to adapt and iterate quickly., • Effective communicator comfortable engaging with technical teams, stakeholders, and customers., • Experience with cloud services, security best practices, and performance optimization is a plus., • Knowledge or interest in 3D printing, digital fabrication, or manufacturing strongly preferred. Ideal Candidate Profile • Visionary: You can translate a big idea into a clear, actionable roadmap., • Technically Fluent: You understand the moving parts of modern software architecture and can work effectively with developers., • Customer-Focused: You dig deep into user workflows and design solutions that solve real problems., • Organized Leader: You can manage timelines, priorities, and resources across multiple deliverables., • Innovative: You seek new ways to deliver value and stay ahead of the curve in an evolving industry. What We Offer • The chance to shape and launch a brand-new product in an innovative and rapidly growing industry., • The opportunity to work with advanced 3D printing technologies and talented teammates., • A collaborative and supportive work environment where your ideas have real impact., • Competitive salary and benefits package., • Opportunities for growth and professional development.

Job Description Houston Behavioral Healthcare Hospital (HBHH) is unique in so many ways. Our facility is located in a serene, picturesque setting within the Spring Branch District of West Houston. We have highly qualified caring staff ready to provide exceptional service. Houston Behavioral Healthcare Hospital is currently recruiting for a Fulltime Activity Therapist Psychiatric. Position: The Activity Therapist Psychiatric Serves as a member of the interdisciplinary treatment team, to provide therapeutic recreational and activity services to adult, adolescent, or child patients under HBHH care for emotional or substance abuse problems. • Develops and implements activity Therapy treatment plans in concert with the interdisciplinary treatment team., • Demonstrates sound application of AT Theory and methodology, • Contributes effectively to discharge planning., • Plans and prepares for activities. Requirements Education: Bachelors degree in a relevant field (e.g., recreational therapy, music therapy, art therapy, occupational therapy required.). Certification or registration preferred. Excellent communication, assessment, evaluation, and interpretation skills. Knowledge of psychiatric and addictive disease diagnoses and treatment; flexibility; teaching or training skills helpful; understanding of, or ability to understand, DSM 5 -TR methodology. Minimum Experience: Minimum of 2 years experience in a healthcare field. Inpatient psychiatric experience preferred. Requirements: CTRS, TRS/TXC, MT-BC, ATR, LOTR. CPR(Upon completion in Orientation or have a current CPR) and Hospital De-escalation Certification (Upon completion in Orientation) Physical Requirements: Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible among of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for Sedentary Work and the worker sits most of the time, the job is rated Light Work. Activities occur inside and outside. Includes variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. Benefits 401-K Tickets at Work PTO and PTO Cash Out STD/LTD Medical, Dental and Vision EAP

Job Description General Technologies, Inc. is looking to hire a Production Supervisor to provide additional support to our team! Purpose: Accomplishes manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job results; coaching, counseling, and disciplining employees; initiating, coordinating, and enforcing systems, policies, and procedures. Responsibilities (Include but are not limited to): • Set daily objectives and communicate them to employees, • Organize workflow by assigning responsibilities and preparing schedules, • Oversee and coach employees on a daily basis, • Ensure the safe use of equipment and tools on a daily basis, • Check production output according to specifications, • Submit reports on performance and progress, • Identify issues in efficiency and suggest improvements, • Assure that new employees are receiving adequate training on how to safely use machinery and are following procedures, • Ensure housekeeping is maintained on a daily basis, • Maintain positive employee relations and adhere to Company policies and safety standards, • Proven experience as Production Supervisor or similar role, • 2-3 years' experience of 'hands-on' injection molding, • Experience in using various types of manufacturing machinery and tools, • Must be able to troubleshoot and adjust molding parameters to maintain quality and maximum output, • Must be able to respond to problems by performing corrective technical or mechanical solutions, • Must be able to engage in frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • Must be flexible; able to work extended hours and weekends when required, • May be required to sit or stand for long periods of time, • Must be able to lift up to 50 pounds, • Basic knowledge in MS Office, • Organizational and leadership abilities, • Communication and interpersonal skills, • Self-motivated with a results-driven approach, • Problem-solving skills, • High School Diploma; Degree in a technical, engineering or relevant field will be an advantage, • Bilingual (English & Spanish) is not mandatory but is a plus Schedule: • Mon-Fri 1:45pm-11:15pm, • Must be able to work overtime and on weekends when needed Physical Demands: The description below is intended to describe the general content and requirements for the performance of this job but is not limited to: • While performing the duties of the job, the employee may be required to stand; walk; sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell., • The employee must be able to lift and/or move up to 50lbs., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Some duties may be removed at any time and new duties may be added as GTI continues to grow. If and as required under federal or state law, upon request, reasonable accommodations which do not create an undue hardship will be considered, discussed, offered and implemented (if accepted) to enable persons with defined disabilities to overcome barriers to the performance of essential functions of the position. Job Posted by ApplicantPro

Job DescriptionDescription: Position Type: Full Time Description: The Assembly Supervisor/Manager is responsible for supervising and coordinating the material flow and activities of subassembly, assembly, and shipping of the company’s products. The incumbent is accountable for the following functions and responsibilities: • Issue and assign Work Orders to assembly personnel as directed by the Production Schedule., • Coordinate the work flow within the department and coordinate with other departmental Supervisors as needed., • Monitor Production Schedule for the Assembly department, schedule upcoming activities, and adjust work schedules to meet production schedules., • Develop and maintain quality and productivity metrics and implement ongoing plans to continuously improve the Assembly department’s performance., • Manage inventory of materials related to assembly and production of final product., • Provide input for monthly department budget and review budget when needed., • Assign duties and examine work for exactness, neatness, and conformance to policies and procedures., • Evaluate assembly procedures and safety procedures on an on-going basis to ensure that all procedures are revised as needed and author documents as needed., • Analyze and resolve work problems and/or assists workers in solving work problems., • Follow the "SQDC" process to gather, analyze, and evaluate data to recommend and implement process improvements that allow for maximum efficiency and productivity., • Update the "SQDC" board and prepare for the boardwalk meeting and present when needed., • Interact with the Quality Control department to ensure that only quality products are produced and released for shipment to customers., • Work with Purchasing to ensure that all needed materials are readily available for use in Assembly, including but not limited to raw materials, parts, and safety equipment., • Coordinate with Shipping and Receiving to meet logistical goals with freight companies., • Supervise/manage Assembly personnel, including supervising/managing daily activities, interviewing, onboarding, training, performance management, disciplinary actions, and terminations, as per company policy., • Perform all the functions and responsibilities of subordinate roles when required., • Maintain a safe and clean work environment by following standards and procedures and comply with legal regulations., • Perform other functions and responsibilities as assigned. Requirements: QUALIFICATIONS/EXPERIENCE REQUIRED: The incumbent must at a minimum possess the following: • High school diploma or GED., • Five years of assembly experience in a manufacturing setting is required. Seven plus years of experience is preferred and a minimum of three years in a supervisory level., • Ability to read, write, and speak the English language fluently., • Strong analytical and problem-solving skills., • Ability to perform intermediate-to-advanced computer skills, including Microsoft Word and Excel as well in an ERP system. Experience working in Fishbowl is preferred., • Ability to successfully manage multiple tasks and timelines in a fast-paced environment., • Ability to liaise professionally with team members and system users., • Ability to perform assigned tasks with minimal supervision., • Strong verbal and written communication skills., • Ability to travel within the continental United States on an as-needed basis. The incumbent must be able to: • Lift a minimum of 50lbs, repeatedly, without assistance and up to 100lbs with assistance., • Push/pull heavy objects with the proper equipment., • Wear the appropriate Personal Protective Equipment when required (i.e., safety glasses or side shields, steel-toe footwear, etc.)., • Stand for long periods of time; up to 8-12 hours a day.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled CNC Fabricator. The CNC Fabricator produces a variety of sheet metal parts, which meet dimensional requirements. Set up and align parts per shop prints in preparation for CNC operations, and final fabrication assembly. Working either individually, or as part of a small team to produce metal buildings and enclosures. Job Duties: • Consults blueprints, work orders, and/or schematics to safely construct a specified structure; develop additional sketches if needed., • Selects appropriate material for each job based on the desired or necessary strength., • Load and unload raw materials and equipment, set up and calibrate accessories, and program the CNC machine, • Cuts, bends, and shapes sheet metal to required dimensions., • Measures and cuts according to specifications, blueprints, or directions., • Verifies conformance of workpiece to specifications, using square, ruler, and measuring tape., • Perform assigned work such as punching holes for screws or bending., • Sets up and operates fabricating machines, such as brakes, and shears., • Coordinates require shutdowns and startups of equipment., • Develops and maintains records for projects and repairs, • Maintains clean and orderly workspace, • Performs other related duties as assigned, • Notify the lead person or Inspector when the product is ready for inspection, • Maintains a clean and safe work area each day and returns tools to their proper locations, • High school diploma or equivalent preferred, • Forklift certification preferred, • Two plus years of CNC experience required, • Two plus years of experience in forklift operating required, • Two plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, etc.) required, • Two plus years of experience in shear, brake press, turret punch, band saw, grinder, ratchet straps, and other hand tools required, • Two plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • High levels of organizational and time management skills required, • High levels of analytical, observational, and active listening skills required, • High levels of reliability required, • Excellent communication skills, both written and verbal required, • Ability to pass physical, drug, driving, and background check required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Ability to read a tape measure and prints required, • Ability to convert decimals to fractions and utilize conversion charts required, • Excellent manual dexterity required, • Alignment with company core values required, • Ability to read tape measure down to 1/32”, • Ability to read decimals/fractions on measurements Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionDescription: Regional Marketing Manager – Drive Growth. Lead Strategy. Make an Impact. Ready to take ownership of a market and make your mark? We’re looking for a Regional Marketing Manager who is equal parts strategist, leader, and doer. This is a hands-on role where your ideas won’t sit on a shelf, you’ll bring them to life across multiple locations and see the direct impact on patient growth and business success. If you thrive in a dynamic, fast-moving environment and enjoy being in the field, collaborating with teams, and driving measurable results, this role is for you. What You’ll Do You’ll lead marketing efforts across your region, connecting strategy with execution: • Analyze market trends, patient needs, and competition to build targeted marketing plans, • Launch and manage campaigns across digital and traditional channels, • Track performance (ROI & KPIs) and continuously optimizing growth, • Travel to clinic locations, support local initiatives, and ensure marketing is aligned on the ground, • Partner with sales, leadership, and vendors to drive alignment and performance, • Identify grassroots opportunities and creative ways to grow each market, • Evaluate and improve patient experience across all touchpoints, • Recruit, train, and manage regional marketing team members, • Lead multi-location marketing strategy across digital, traditional, referral, and community channels, • Drive patient acquisition for premium surgical services including LASIK, cataract, dry eye, and specialty care, • Manage agency partners, media buys, SEO, PPC, social media, and creative production, • Analyze ROI, lead quality, conversion funnels, and campaign performance, • Build physician referral growth strategies and co-management outreach programs, • Oversee brand consistency across all markets and touchpoints, • Launch promotions, events, webinars, and growth initiatives, • Strong leadership and communication skills, you know how to influence and inspire, • A data-driven mindset with the ability to turn insights into action, • Proven ability to manage multiple priorities in a fast-paced environment, • A hands-on approach, you’re just as comfortable executing as you are strategizing, • Bachelor’s or master’s degree in marketing, Communications, or a related field, • 5+ years of marketing experience (healthcare or ophthalmology experience preferred), • Visible Impact: Your work directly drives patient growth and clinic success, • High Ownership: Lead strategy and execution for your region, • Dynamic Environment: No two days are the same, be active, engaged, and in the field, • On-site role with regular travel to clinic locations, • Active, fast-paced work setting with both office and field responsibilities You won’t just be joining a company—you’ll be joining a team that invests in you. • Day-One Benefits: Medical, dental, and vision coverage with company contributions, • Affordable Healthcare: Options for you and your family, plus $0 copay virtual care (primary care, mental health, dermatology, and more), • Invest in Your Future: Company-matched 401(k) + student loan repayment matching, • Work-Life Balance: 18 days of PTO starting day one + rollover options, • Flexibility with Your PTO: Convert unused time into cash, 401(k), or student loan payments, • Extra Protection: Company-paid life and AD&D insurance, • Wellness Support: Employee mental health assistance program + HSA/FSA options, • Exclusive Perks:, • Free annual eye exams for you and your family, • Significant discounts on LASIK, cataract surgery, and optical goods, • Pet insurance and additional voluntary benefits, • Career Growth: Certification reimbursement and real advancement opportunities, • A Culture You’ll Enjoy: Employee celebrations, rewards, and referral bonuses

Job Description Quality Inspection Lead Precision Manufacturing | Aerospace | SpaceX | Oil & Gas Houston, TX Area $42–$45/hour + 100% Employer Paid Health Insurance We are partnering with a highly specialized precision manufacturing company that supports customers across Aerospace, SpaceX, Oil & Gas, Automotive, and international industrial markets. This is not a high-volume production environment where you inspect the same part repeatedly every day. This is a high-mix, precision-focused operation where quality matters more than speed. Their shop is clean, air-conditioned, highly organized, and built around long-term quality performance. They are seeking a Quality Inspection Lead to step into a critical role as a long-tenured employee prepares for retirement after 16 years. This position serves as a key checkpoint before products move to customers and will play a major role in maintaining quality standards across complex machined and welded components. Why This Opportunity Stands Out • $42–$45/hour compensation, • 100% employer-paid health insurance, • Clean, air-conditioned facility, • Work with Aerospace, SpaceX, and Oil & Gas customers, • Modern inspection equipment, • High variety of parts and projects, • Quality-focused environment (not chaotic production pressure), • Stable leadership team, • Perform First Article Inspections on machined components, • Review blueprints, dimensional drawings, and balloon drawings, • Conduct detailed inspections on complex parts, • Write and manage Non-Conformance Reports (NCRs), • Oversee calibration schedules and documentation, • Ensure quality documentation remains accurate and audit-ready, • Work closely with machining, production, and leadership teams Experience with the following is highly preferred: • CMM equipment, • Optical comparators, • Vision measurement systems, • Precision measuring tools, • Strong quality inspection experience in manufacturing environments, • First Article Inspection experience is required, • Experience writing NCRs, • Experience managing calibrations, • Ability to read blueprints and dimensional drawings, • Strong computer/documentation skills, • High attention to detail, • Strong communication skills Experience in any of the following environments is highly valued: • Aerospace, • Oil & Gas, • Medical device, • Automotive, • Precision machining Work Schedule • 12-hour shifts, • 1-hour lunch break Ideal Candidate You’ll thrive here if you enjoy: • precision work, • accountability, • autonomy, • problem solving, • working in smaller teams We are committed to creating a diverse workplace and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment regardless of race, religion, gender, sexual orientation, age, disability, veteran status, or other protected classifications.

Job Description This entry-level Project Engineer opportunity is a springboard to grow your earnings and career – if you are meeting company standards, you will receive a $10k raise within your first 6 months and additional $10k raises for the next 2 years ($30k in raises over the next 3 years). While Project Manager is the most common next step (this promotion path normally takes 3 years but can be quicker, depending on YOU and your pace), you'll have the chance to explore other exciting opportunities within our different departments. Project Engineer – What You Will Do You will play a pivotal part in supporting our team of Project Managers and making sure construction projects are running smoothly from start to finish. • Support and maintain data, information, communications, and approvals required by project and company requirements between owner, contractors/subcontractors, or other project-related entities, • Participate in and maintain document and project control systems and procedures., • Attend project meetings to include documentation, administration, and tracking of relevant information and statuses, • Obtain, track, and document contractor and subcontractor contractual requirements (and construction plans and specs) on areas of safety, performance, project staff, and equipment as directed by project manager, • Assist in project closeout procedures You will support multiple projects concurrently. You will work in the office and out in the field (estimated 70% of your time will be performed in the field or on job sites). No overnight travel. Project Engineer– Required Skills, Experience & Personality Fit • Comfort with working on site at a job site / travel throughout the Houston area to job sites, • You are not happy with the status quo – you want to do BETTER, • You enjoy communicating with many different people every day (you might even call yourself an extrovert!), • Organization skills – you are a master at juggling many moving parts and keeping the team organized You will receive medical, dental and vision insurance options, paid time off, paid holidays, and a 401k plan with annual company contribution. In addition, our office provides you access to on-site health care for urgent care items and prescriptions for you and your family. This role requires successful completion of a drug test, background check and clean driving record prior to start date.

Job Description Reports to: VP of Engineering Fleetzero is electrifying global maritime shipping with marine-grade lithium-iron-phosphate battery systems built for the harshest environments on the planet. Our Leviathan battery platform is in active ABS Product Design Assessment, with hardware on test rigs today and production hardware shipping in the near term. We are hiring a Senior Test Engineer to take full ownership of our battery test program: The rigs, the procedures, the automation, and the evidence packages that turn engineering work into class-approved, vessel-ready hardware. This is a hands-on role for an engineer who is equally comfortable wrenching on a fixture at 6 AM, debugging a CAN trace at noon, and presenting a thermal propagation test report to an ABS surveyor at 4 PM. You will own our hardware-in-the-loop (HIL) infrastructure, our cell/module/system-level test cells, and the requirements-to-evidence traceability that holds the whole program together. You will work shoulder-to-shoulder with our hardware, firmware, and systems teams to design tests early, fail hardware fast, and produce documentation that is self-explanatory to a first-time reader. If you have ever looked at a battery abuse test cell and thought "I could run this better," this is your job.What you'll do * Own the test rigs. Take full responsibility for our existing cell, module, and pack-level test stations: cyclers, environmental chambers, abuse test enclosures, HV safety systems. Improve them. Document them. Make them auditable. * Stand up our HIL program. Architect and build hardware-in-the-loop infrastructure to validate BMS firmware (CMU/PMU/SMU layered architecture) against simulated cell, contactor, and vessel-level fault conditions. Drive HIL coverage upstream into the firmware development cycle. * Author the test program. Write test plans, procedures, and reports for characterization, verification, validation, and abuse testing: including thermal propagation, overcharge, over-discharge, external short circuit, vibration, IP ingress, and thermal cycling. Make every report stand on its own as ABS evidence. * Run witness testing. Execute ABS and USCG witness tests on-site, including pre-test dry runs, surveyor walkthroughs, and post-test documentation packages. * Build traceability. Tie every test case back to a requirement, every result back to a test case, and every certificate back to a result. Help us mature requirements-to-test traceability tooling across the engineering organization. * Automate and instrument. Develop Python (or equivalent) automation for cycler control, DAQ, post-processing, and report generation. Eliminate manual data wrangling wherever it shows up. * Diagnose failures. Lead root-cause investigation when hardware fails on the bench, in qualification, or in the field. Translate findings into design and process changes. * Grow the function. Help shape Fleetzero's test engineering culture as we scale from R&D into production. Mentor junior engineers and technicians as the team grows around you. What you bring * Degree in Electrical Engineering, Mechatronics, or related field, or equivalent hands-on experience. We care about what you can do, not where you sat for four years. * 5+ years of test engineering experience in batteries, energy storage, EV powertrains, aerospace, or another safety-critical hardware domain. * Direct, hands-on experience with battery cyclers (Arbin, Maccor, Bitrode, Chroma, or equivalent) at the cell, module, or pack level. * HIL experience using NI, dSPACE, Speedgoat, or equivalent platforms, and a clear point of view on what makes a HIL test rig actually useful versus merely impressive. * Comfortable working around high-voltage DC systems. You know what an arc flash boundary is and you respect it. * Strong scripting and data analysis skills in Python (preferred), MATLAB, or LabVIEW, including comfort building test automation from the ground up. * Working knowledge of CAN, RS-485, Modbus, and other industrial communication protocols. * Clear technical writing. Your test reports do not require a phone call to interpret. Nice to have * Experience supporting class society (ABS, DNV, Lloyd's, BV) or regulatory (USCG, Coast Guard, FAA, NHTSA) witness testing. * Familiarity with UL 1973, UL 9540A, IEC 62619, UN 38.3, or equivalent battery safety standards. * Functional safety background (IEC 61508, ISO 26262, or marine equivalents). * Experience building out a test lab from scratch: Fixturing, safety systems, fire suppression, ventilation, HV lockout-tagout. * Marine, naval, or shipboard experience. Bonus points if you have ever stood a watch. How we work We are a small, dense engineering team in Houston. We test early, test often, and break hardware on purpose. We work in person because integration problems live in the gaps between disciplines, and the gaps close faster when you can walk over to the next bench. We document because the next person who reads our work might be a class surveyor, a customer's chief engineer, or a future version of ourselves at 2 AM in a shipyard. Our team includes mariners, fabricators, software engineers, sales people. We respect the trades and the textbooks equally. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJoin the Chastang Ford Family as a Retail Sales Consultant or Commercial Account Manager! Location: Houston, TX Compensation: $48,000 – $200,000+ (Salary + Commission) Languages: Bilingual (English/Spanish) preferred About the Opportunity Are you a people person with a passion for cars and a drive to succeed? Chastang Ford—The Ford Truck Experts—is looking for energetic, motivated individuals to join our vehicle sales team as a Retail Sales Consultant or Commercial Account Manager. Whether you're just starting out or looking to take your sales career to the next level, we’ll give you the tools, training, and support to thrive. Why Chastang Ford? We’re not just a dealership—we’re a family business with deep roots in Houston since 1933. At Chastang Ford, we believe in: • Investing in your growth and success, • Transparency and trust at every level, • Freedom to make decisions and lead, • A healthy work-life balanceWhat You’ll Do, • Become a Ford product expert and help customers find the perfect vehicle, • Respond quickly and professionally to all internet leads via email, phone, text, and CRM, • Guide customers from online inquiries to in-store appointments and remote vehicle purchases when necessary, • Proactively follow up with unsold leads and past customers, • Build lasting relationships and a personal pipeline of repeat and referral business, • Self-market through social media, email campaigns, and community outreach to grow your personal brand, • Keep CRM updated with detailed notes, activities, and follow-ups, • Stay sharp with current product knowledge, promotions, and digital selling techniques, • Affordable living, • World-class healthcare, • A booming arts and sports scene, • Great schools and family-friendly neighborhoods, • A quick 30-minute drive to the beach!Perks & Benefits, • $60K–$200K+ earning potential, • 401(k) with company match, • Dealer-covered Health Savings Account (HSA), • Life insurance, • Paid holidays and birthdays off, • Medical, dental, and vision plans, • Employee discounts on vehicles, parts, and service

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE The Senior Accountant will be responsible for assisting with the Company’s day-to-day accounting and reporting functions including the monthly, quarterly, and annual accounting close process. KEY RESPONSIBILITIES • Manage the monthly, quarterly, and annual accounting close process to support the preparation of monthly management reports and the Company’s required 10-Q and 10-K SEC filings., • Prepare and/or review monthly reconciliations of general ledger accounts., • Assist with preparation of management reporting package., • Prepare, record, analyze and report accounting transactions and ensure the integrity of accounting records for completeness, accuracy, and compliance with U.S. GAAP and internal policies., • Coordinate and collaborate with peers within the Company as well as Accounting, to ensure processes are created and performed efficiently and accurately., • Interface with external auditors with respect to the Company’s financial statements., • Assist with certain accounting and internal control functions as needed., • Other accounting and special projects as requested.EDUCATION, SKILLS, EXPERIENCE, & COMPETENCIES, • 5+years of accounting experience., • Big 4 accounting experience is a plus., • Strong US GAAP knowledge, • Experience with SAP S4/RISE is a plus., • Strong critical thinking, interpersonal, communication, and customer service skills, • Ability to effectively interact with senior management., • Required/preferred education:, • Bachelor’s degree in Accounting, Finance or related field.