Trabajos post en Huntsville, Alabama - Page 2Crear alertas

Job Description As a national distributor specializing in convenience store products, Lakshmi Distributors, LLC dba CStore Master is anything but ordinary. We’ve invested in in-house software development from the start, allowing us to build cutting-edge ERP tools that give us real-time analytics and operational agility. We don't just keep up with the industry—we set the pace. Want to join this fast-growing innovator in Distribution? If so, we are currently expanding our dynamic team and are on the lookout for a Warehouse Receiver/Driver. What You Will Do As a Warehouse Receiver/Driver, you will be responsible for transporting goods between our two local locations using a company box truck. Because there will not be a lot of deliveries the majority of the time this position will assist the Receiving department where they will be responsible for receiving, inspecting, and organizing goods in a busy warehouse environment. This role requires excellent driving skills, attention to detail, strong organizational skills, and the ability to work efficiently under tight deadlines. Key Responsibilities: • Safely and efficiently operate a box truck, van, or tractor-trailer to deliver goods between designated locations, • Load and unload cargo using pallet jacks, forklifts, or other equipment as necessary, • Adhere to all traffic laws and regulations while driving, • Perform pre-trip and post-trip inspections of the vehicle to ensure it is in good working condition, • Receive and unload incoming shipments from trucks., • Inspect deliveries for accuracy and quality, checking for any damage., • Ensure all goods are accurately recorded and logged into the inventory system., • Organize and store products in the appropriate location within the warehouse., • Collaborate with other warehouse personnel to maintain an organized and clean workspace., • Assist in stocktaking and inventory checks as needed., • Follow all safety and operational procedures to maintain a safe working environment., • Ability to safely operate equipment such as pallet jacks and forklifts, • Knowledge of local traffic laws and regulations, • Must take and pass required DOT medical certification, • Good Driving Record, • High school diploma or equivalent., • Previous warehouse or receiving experience preferred, but not required., • Ability to lift and move heavy items (up to 50 lbs)., • Strong attention to detail and organizational skills., • Basic computer skills (experience with inventory management software is a plus)., • Ability to work independently and as part of a team., • Good communication skills and a positive attitude., • Competitive salary and benefits., • Cutting-edge work environment with robotic technology., • Health insurance, • Dental insurance, • Vision insurance, • 401(k), • Paid time off Pay: $16.00 per hour Schedule: • 9:00 AM – 5:00 PM CStore Master is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, national origin, age, disability, or veteran status

Job Description Job Title: Engineering Technician • Troubleshooting and mechanical assembly expertise., • Experience with sub-assembly, repair, and engineering support., • Proficiency in soldering, blueprint reading, and prototype development., • Familiarity with oscilloscopes and mechanical work instructions., • Strong understanding of subsystems and schematics., • Associate Degree in a technical field preferred., • Prior experience in a mechanically inclined role., • Strong time management and critical inspection skills., • Ability to recognize trends in failures and report to QA., • Meticulous approach to applying consistent methods and processes., • Familiarity with hand tools and soldering, though soldering will not be a regular duty. . Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 17, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionJob Title: Wire Harness Assembler Job Description The role involves assembling electrical and electronic components on printed circuit boards, wiring harnesses, power supplies, and other electrical assemblies or sub-assemblies. This position requires all benchwork, specifically building harnesses for aircraft to the IPC Standard. Accuracy and timely completion of tasks are essential. 10% of the work involves box build-up, requiring the ability to read drawings and work instructions. Responsibilities • Use a wiring diagram to lay out and secure wires., • Strip wires and cut heat shrink tubing., • Attach terminals and cover wires., • Shrink tubing with a heat gun., • Interlace multiple wires and examine connectors., • Seal and crimp wires, attach terminals., • 1+ year experience in wire harness assembly., • Proficiency in harness assembly, cable assembly, blueprint reading, electrical assembly, wiring, and soldering., • Ability to use hand tools, read schematics, and perform electrical wiring., • IPC 610 (Soldering) is a plus., • IPC J-STD is a plus., • Experience in automotive assembly or soldering assembly is beneficial., • Experience with assembly of harnesses for aircraft or similar industries. This is an open-ended contract with potential for direct hire, offering performance-based raises and monthly performance reviews. The company is experiencing extreme growth, providing huge career growth potential and job security. The location offers an excellent quality of life, with a low cost of living, high-paying jobs, and some of the best high school systems in the state. Work Environment The facility is air-conditioned and very clean, with available breakrooms. Candidates must be open to 1st or 2nd shift, with 1st shift running from 6:00am to 2:30pm and 2nd shift from 3:00pm onwards. Job Type & Location This is a Contract position based out of Huntsville, Alabama. Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $21.00 - $29.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician B - 1st shift Job Code: 31132 Job Location: Huntsville, AL Job Schedule: 9/80 work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: L3Haris is seeking a Manufacturing Technician to work at our state-of-the-art Advanced Manufacturing Facility (AMF) North in Huntsville, AL, which is our inert manufacturing facility for fabrication and assembly of small, medium and large case composite rocket motor hardware. Essential Functions: \n • Perform basic operations on filament winding machines under supervision, with a good understanding of fiber placement and tension control. \n, • Assist in resin mixing and resin content checks. \n, • Properly string up a towpreg winding cell, including handling the spools, stringing up the filament winding machines, and assembling/maintaining the towpreg delivery head. \n, • Primarily works in a production setting with medium sized products. \n, • May provide lesser supporting role in larger and complex products. \n, • Learn to fabricate skirt (Skirt Dam Installation, Film Adhesive application, Unidirectional Mat application). \n, • Troubleshoot and resolve less complex issues with the winding process or equipment. \n, • Provide feedback on the winding process and collaborate with engineers to address concerns. \n, • Produce parts, components and final assemblies using composite fabrication, compression molding, metal fabrication, modification, checkout, re-work, quality testing, and assembly utilizing detailed work instructions, schematics, diagrams, layouts or manufacturing test development or diagnostic equipment. \n, • Prepare various components for lay-up, filament winding, cure and post cure using cured and uncured rubber materials and adhesives. \n, • Operation of various machinery and shop equipment which may include but not be limited to ovens, autoclaves, manual lathes, CNC lathes, CNC milling centers, manual mills, boring mills, presses, furnaces, mixers, grinders, swages, paint booths, fume hoods and overhead cranes. \n, • Fabrication and assembly of piece parts into completed sub-assembly using assembly tools. \n, • Perform vacuum bagging and related processes for fabrication and curing composite parts. \n, • Complete structural bonding operations using film adhesives, core materials, and adhesives. \n, • Building of complex layups individually and in small groups. \n, • Build, clean, and properly store large tooling. \n, • Insulation of mandrels and composite cases. \n, • Cast, cure and machining of sand mandrels. \n, • Facilitate and conduct OJT training of technicians as required. \n, • Works with management and supervision to meet critical deadlines. \n, • Conduct routine maintenance and minor repairs without supervision. Ensure the wind cell and winding machines are kept clean and in an orderly fashion. \n, • Monitor the production process more closely and take responsibility for intermediate-level quality control checks. \n, • Accurately complete necessary forms and reports related to the manufacturing process. \n, • Support safety initiatives and adhere to 5S+1 standards \n, • Produce development hardware to support research and development programs. \n, • Troubleshoot processes and identify, modify and/or escalate out of control processes and production escapes. \n, • Assist in the development of process improvement actions within the facility \n\n Qualifications: Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job DescriptionJob Title: Engineering Technician Job Description We are seeking a skilled Engineering Technician with prior sUAS assembly and small component assembly experience. The ideal candidate will have a solid understanding of subsystems in an sUAS and the ability to troubleshoot effectively. A working knowledge of part numbering, BOM structures, and their integration into a product is essential, as is prior experience with schematics, blueprints, and work instructions. Responsibilities • Assemble small components and utilize hand tools with precision., • Troubleshoot and repair mechanical and electronic subsystems in sUAS., • Read and interpret schematics, blueprints, and work instructions to ensure accurate assembly and repair., • Support production and RMA schedules through effective time management., • Conduct critical inspections to review incoming products and determine field failures., • Assist with Root Cause and Correction Analysis (RCCA) alongside team members., • Recognize trends in failures and components to report back to the QA department., • Apply consistent methods and processes meticulously in all tasks.Essential Skills, • Experience with mechanical assembly, troubleshooting, and repair., • Proficiency in reading schematics and blueprints., • Strong skills in mechanical inclination and the use of hand tools., • Ability to utilize soldering skills, though not regularly part of job duties., • Familiarity with oscilloscopes and prototype development.Additional Skills & Qualifications, • Associate Degree in a technical field preferred., • Prior experience in a mechanically inclined role., • Excellent time management skills., • Ability to assist in Root Cause and Correction Analysis., • Strong communication skills to ensure professional interactions.Work Environment The work environment includes a schedule from 6:55 am to 3:30 pm, with some overtime required on Saturdays. The role is based in a startup environment focused on research and development, actively partnering with military organizations for UAS capabilities. The company is growing in the Huntsville area, providing an exciting opportunity for career growth in the field of unmanned aerial systems. Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 18, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Job Title: Aircraft Mechanic - UH-60 Job Location: Guntersville, AL Overview / Job Description: Aircraft Mechanics will be performing Phase Maintenance and Modifications for UH-60 aircraft in Guntersville, AL. Phase Maintenance will consist of PMI 1 and 2. Mechanics will be performing extensive work on the main and tail rotors, engines, hydraulics, flight controls, etc. Modifications will include but are not limited to avionics upgrades, crew compartment upgrades, weapon system / payload upgrades and overall updates to the Blackhawk platform. Aircraft Mechanics will be working in a hangar that is based around the water / in the foot hills of the mountains. The current team is a diverse crew of people from in and around Alabama with quite a few military veterans / professionals from the Army and those who performed Defense Contract work with the SU. We are looking for people who wish to be with our client long term and who want to grow with hem as they expand their business footprint and continue to bring more work to Alabama. Pay Rate: Starting Pay - $34-36.00 an hour (candidates are eligible for raises once converted direct), per diem split available to eligible candidates Shift: Monday – Thursday, 6:00 AM – 4:30 PM (10 hour shifts) Employment Terms: 6-month Contract to Hire(or indefinite contract, your choice) Position Requirements: • Ideal candidates will have 4+ years of Aircraft Maintenance Experience, • UH-60 (or similar platform) experience is preferred, • Phase Maintenance / Depot Level / Heavy Maintenance experience required, • Aircraft modification experience is a plus #AeroJobsAviAL Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $36.00 - $36.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 17, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Avionics Technician Overview Aerotek Aviation is seeking experienced Avionics Technicians to join our team in Guntersville, AL. These technicians will support a long-term UH-60 Blackhawk program, performing phase maintenance, modifications, and installations on U.S. Military Blackhawk aircraft. This is an excellent long-term opportunity with a family-friendly company that values quality, safety, and teamwork. Position Summary As an Avionics Technician, you will be responsible for: • Installing glass cockpits, autopilot systems, and other avionics upgrades across various UH-60 Blackhawk models, • Performing avionics modifications, troubleshooting, and phase maintenance inspections, • Supporting system upgrades and ensuring all work meets FAA and military standards Schedule & Compensation Pay Rate: $36.00/hour + $1.50/hr differential for 2nd shift Benefits: Paid Holidays Shift: 1st Shift & 2nd Shift (Monday–Thursday, 10-hour days) Overtime: Available as needed Skills & Qualifications • 3–4+ years of avionics experience, • Must have avionics modification and installation experience, • Must have avionics troubleshooting experience, • UH-60 / helicopter experience preferred (any military aircraft platform accepted), • Must have own tools or be able to acquire them within the first few weeks of employment Why Join Us? • Long-term, stable opportunity on a respected UH-60 program, • Supportive, team-oriented work environment, • Opportunity for career growth and transition to full-time employment Pay and Benefits The pay range for this position is $36.00 - $36.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 28, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Description We are seeking a skilled Engineering Technician with prior sUAS assembly and small component assembly experience. The ideal candidate will have a solid understanding of subsystems in an sUAS and the ability to troubleshoot effectively. A working knowledge of part numbering, BOM structures, and their integration into a product is essential, as is prior experience with schematics, blueprints, and work instructions. Responsibilities • Assemble small components and utilize hand tools with precision., • Troubleshoot and repair mechanical and electronic subsystems in sUAS., • Read and interpret schematics, blueprints, and work instructions to ensure accurate assembly and repair., • Support production and RMA schedules through effective time management., • Conduct critical inspections to review incoming products and determine field failures., • Assist with Root Cause and Correction Analysis (RCCA) alongside team members., • Recognize trends in failures and components to report back to the QA department., • Experience with mechanical assembly, troubleshooting, and repair., • Proficiency in reading schematics and blueprints., • Strong skills in mechanical inclination and the use of hand tools., • Ability to utilize soldering skills, though not regularly part of job duties., • Associate Degree in a technical field preferred., • Prior experience in a mechanically inclined role., • Excellent time management skills., • Ability to assist in Root Cause and Correction Analysis. The work environment includes a schedule from 6:55 am to 3:30 pm, with some overtime required on Saturdays. The role is based in a startup environment focused on research and development, actively partnering with military organizations for UAS capabilities. The company is growing in the Huntsville area, providing an exciting opportunity for career growth in the field of unmanned aerial systems. Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description • Support the execution and maintenance of the Master Production Schedule (MPS) and short-term planning cycles, • Monitor and analyze material availability, open work orders, and production readiness across all programs with Clear to Build process, • Develop and maintain production planning reports, dashboards, and KPI summaries using ERP and BI tools, • Extract, analyze, and reconcile data from NetSuite ERP to ensure accuracy of BOMs, MRP signals, and order statuses, • Identify planning gaps, schedule risks, or material shortages and recommend corrective actions to management, • Assist in running production simulations and capacity models to support sales demand and operational forecasting, • Collaborate with Supply Chain Procurement, Engineering, Inventory, and Production teams to ensure alignment between planning and execution, • Provide regular status reports on finished goods, WIP, and inventory levels to support daily metric reviews, • Monitor new product development programs with material readiness through planning and data analytics through partnership with Supply Chain, Quality, Engineering, and Production., • Bachelor’s degree in Supply Chain, Operations Management, Business Analytics, or a related field, • 2+ years of experience in a production planning, supply chain, or manufacturing analytics role, • Hands-on experience working within an ERP system to manage production or planning data, • High proficiency in Microsoft Excel, including data modeling, pivot tables, and advanced formulas, • Working knowledge of Power BI, Tableau, or other business intelligence/reporting tools, • Strong analytical skills and a proactive, detail-oriented mindset, • Ability to identify issues in planning workflows and communicate recommendations clearly, • Knowledge with MRP principles, BOM structures, and work order processes, • Ability to develop Power BI or Tableau business intelligence tools preferred, • Hands-on experience within NetSuite ERP This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 18, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionThe Kidcam Program Director is responsible for designing and delivering a dynamic, well-balanced camp experience by planning and executing weekly schedules and activities. This role ensures that programming is engaging, age-appropriate, and reflective of Kidcam’s mission to create a safe, fun, and memorable summer for every camper. * Pre-Camp: The Program Director works closely with the Camp Director to design weekly schedules, organize supply lists, and prepare staff training on how to facilitate activities, games, and transitions. * During Camp: The Program Director oversees the daily flow of programming, ensuring activities are implemented smoothly and on time. They maintain supplies and equipment, provide hands-on guidance to staff, and manage logistics for special events, field trips, and transportation. Their leadership helps ensure campers are actively engaged, transitions are efficient, and program quality remains consistent throughout the summer. * Post-Camp: The Program Director is responsible for closing out program records, inventorying supplies and equipment, and providing feedback on activities to support future planning and continuous improvement.

Job Description Responsibilities • Inspect first articles, in-process parts, and products prior to shipment using gauges, coordinate measuring machines, optical comparators, and vision systems., • Generate spreadsheets for data collection., • Generate first article inspection reports., • Reconcile final inspection documentation for shipments., • Test incoming raw materials., • Use precision measuring instruments including micrometers, calipers, fixtures, and gauges to check work and perform detailed inspection of parts produced., • Read instrumentation and gauges to accurately measure dimensions on parts being machined within specified limits., • Inspection, • Mechanical, • Quality control, • Quality assurance, • Troubleshooting, • Assembly, • Quality inspection, • Mechanical inspection, • Repair, • Blueprint reading, • Calipers, • Micrometer, • Visual inspection, • CMM, • Mechanical and technical capacity, • Organizational skills, • Problem-solving/analytical skills, • Time management, • Initiative, • Good problem-solving and conceptual skills, • Blueprint analysis, • Mechanical system knowledge, • Critical thinking, • Tool familiarity, • Excellent communication skills, • Mathematical skills, • Experience with electrical systems and wiring, • Experience in production and installation This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $23.00 - $27.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 17, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionJob Title: Engineering Technician Job Description We are seeking a skilled Engineering Technician with prior sUAS assembly and small component assembly experience. The ideal candidate will have a solid understanding of subsystems in an sUAS and the ability to troubleshoot effectively. A working knowledge of part numbering, BOM structures, and their integration into a product is essential, as is prior experience with schematics, blueprints, and work instructions. Responsibilities • Assemble small components and utilize hand tools with precision., • Troubleshoot and repair mechanical and electronic subsystems in sUAS., • Read and interpret schematics, blueprints, and work instructions to ensure accurate assembly and repair., • Support production and RMA schedules through effective time management., • Conduct critical inspections to review incoming products and determine field failures., • Assist with Root Cause and Correction Analysis (RCCA) alongside team members., • Recognize trends in failures and components to report back to the QA department., • Apply consistent methods and processes meticulously in all tasks.Essential Skills, • Experience with mechanical assembly, troubleshooting, and repair., • Proficiency in reading schematics and blueprints., • Strong skills in mechanical inclination and the use of hand tools., • Ability to utilize soldering skills, though not regularly part of job duties., • Familiarity with oscilloscopes and prototype development.Additional Skills & Qualifications, • Associate Degree in a technical field preferred., • Prior experience in a mechanically inclined role., • Excellent time management skills., • Ability to assist in Root Cause and Correction Analysis., • Strong communication skills to ensure professional interactions.Work Environment The work environment includes a schedule from 6:55 am to 3:30 pm, with some overtime required on Saturdays. The role is based in a startup environment focused on research and development, actively partnering with military organizations for UAS capabilities. The company is growing in the Huntsville area, providing an exciting opportunity for career growth in the field of unmanned aerial systems. Job Type & Location This is a Permanent position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 25, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionJob Title: Aircraft Structures Technician Overview Aerotek Aviation is seeking experienced Aircraft Structures / Sheet Metal Technicians to join our team in Guntersville, AL. These technicians will perform modifications and installations on UH-60 aircraft as part of a Foreign Military Sales (FMS) government program. This role involves working on autopilot systems and glass cockpits, with the potential for long-term contracts and conversion to a direct position. This is an excellent opportunity with a family-friendly company that values quality, safety, and teamwork in a scenic and affordable location. Position Summary As an Aircraft Structures / Sheet Metal Technician, you will be responsible for: • Performing modifications and installations on UH-60 aircraft, • Working on autopilot systems and glass cockpits, • Utilizing sheet metal and airframe repair techniques, • Reading and interpreting blueprints and engineering drawings, • Ensuring high-quality standards in aircraft modifications Schedule & Compensation Pay Rate: Competitive, based on experience Shift: 1st Shift & 2nd Shift (Monday–Thursday, 10-hour days) Overtime: Available as needed Skills & Qualifications • Minimum of 4-5+ years of experience in aircraft structures, • Proficiency in modification and installation processes, • Ability to read and interpret blueprints and engineering drawings, • Experience in sheet metal repair and aircraft modification, • Experience with rotary-wing aircraft preferred (any platform experience considered), • Must have own tools or be able to acquire them within the first few weeks of employment Why Join Us? • Long-term, stable opportunity with potential for direct hire, • Supportive, team-oriented, and relaxed work environment, • Three-day weekends with a consistent day shift, • Located between Huntsville and Chattanooga in the beautiful, low-cost Guntersville area — known as the fishing capital of the world Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $36.00 - $36.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 28, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: General Production Worker Job Description We are seeking a dedicated and experienced general production worker to join our team in an industrial setting, operating machinery such as furnaces and engaging in machine operation tasks. Responsibilities • Operate industrial machinery, including furnaces, as part of the manufacturing process., • Handle barrels of tungsten powder, placing them in dryers to initiate the chemical manufacturing process., • Perform physical tasks such as moving products and walking up and down stairs throughout the shift., • Maintain productivity in a non-climate controlled environment, managing exposure to high temperatures and residue., • Experience in manufacturing and machine operation., • Ability to lift up to 30 lbs regularly., • Good work history with reliability and consistency., • Experience in a chemical, mechanical, or construction is preferred. Join a dynamic work environment that offers room for growth based on performance. While the work is challenging, it comes with the opportunity to gain valuable experience in the industrial sector. Embrace the chance to work flexible shifts that allow for a work-life balance, with competitive compensation for hard work and dedication. Work Environment The work environment is challenging, featuring a very physical job in a non-climate controlled chemical plant. Employees should expect an ammonia smell and the possibility of becoming dirty due to black powder residue. The plant can be hot, especially in the summer, with temperatures exceeding 120°ree;F. Workers will be trained to handle high-temperature furnaces, robots, and powdered metal. Dress comfortably for manual labor in a tough industrial setting. Job Type & Location This is a Contract to Hire position based out of Huntsville, Alabama. Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 25, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

It is the policy of the Alabama Community College System, including all post secondary community and technical colleges under the control of the Alabama Community College System Board of Trustees, that no employee or applicant for employment or promotion, on the basis of any impermissible criterion

Focus on the core content of the job post, removing all extra metadata, headers, and redundant information.Keep the formatting beautiful and clean, ensuring a high signal to noise ratio.

Company Overview: Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Allied Universal® is hiring a Security Officer - Cleared (Clearance Required - Armed). At Allied Universal, an Armed Cleared Security Officer is entrusted with sensitive information and given the responsibility to protect classified information and personnel. As an Armed Cleared Security Officer, you'll receive specialized training in site-specific security protocols associated with your clearance level, allowing for skill development and professional growth in the security field. RESPONSIBILITIES: • Provide high quality security services, safeguarding personnel, property, and information with professionalism, • Conduct patrols within and around the facility on foot, bicycle, or vehicle to ensure the protection of people, assets, and sensitive or classified information, • Greet guests and employees and escorts visitors and contractors to secure entry and exit points, • Follow site-specific performance manuals and post orders; reporting safety concerns, security breaches, and unusual circumstances via written and oral communication to client and/or other security personnel, • Respond to and assesses security alarms or emergency alarms, • High school diploma or equivalent, or 5 years of verifiable experience, • Must possess a Department of Defense (DoD) position appropriate level security clearance (national security eligibility determinations take into account a person's stability, trustworthiness, reliability, discretion, character, honesty, and judgment), • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment, • Must possess one or more of the following:, • Minimum of three (3) years of security experience on a Department of Defense-cleared site, • Prior military experience, • Minimum of 21 years of age (or higher if required by the state), • Effective written and oral communication and interpersonal skills, • Exceptional customer service skills, • Prior law enforcement or armed security experience, • Health insurance and 401k plans for full-time positions, • Schedules that fit with your personal life goals, • Ongoing paid training programs and career growth opportunities If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . 2025-1468665

Job Description Job Title: CMM Technician Job Description We are seeking multiple skilled CMM Technicians to join an Aerospace contractor located in Huntsville, AL. This is a full-time employment opportunity for those interested in working in a dynamic and technologically advanced environment. Responsibilities • Conduct inspections using micrometers, calipers, optical comparators, and coordinate measuring machines (CMM) with proficiency in GD&T., • Perform first article inspections and utilize laser trackers for precision measurement., • Execute or witness test procedures and generate comprehensive test reports., • Interpret and analyze drawings, assembly schematics, and specifications to prepare inspection reports., • Generate quality documentation including inspection reports, bubble prints, Certificates of Conformance, and Non-Conformance Reports., • High school diploma or GED with 3-5 years of relevant experience., • Proficiency with standard measurement equipment such as micrometers, calipers, and optical comparators., • 4 or more years of experience with Romer Arm, AS1 Scanner, and Leica Laser Trackers., • Fluency in GD&T., • Ability to read and interpret technical drawings and specifications., • Experience with Spatial Analyzer or similar PCMM software is preferred., • Experience in the inspection of complex aerospace hardware and non-conforming materials., • Familiarity with ISO9001/AS9100 quality systems and AS5553 counterfeit prevention. Join a reputable aerospace contractor offering stability and growth opportunities in a full-time capacity post-contract. Work in an environment that values precision, quality, and continuous improvement. Work Environment Enjoy working in a climate-controlled environment designed to maintain optimal working conditions. Job Type & Location This is a Contract to Hire position based out of Huntsville, Alabama Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $24.00 - $43.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 27, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Quality Inspector Job Description Under the supervision of the Quality Manager, the Quality Inspector inspects incoming parts and supplies, performs first article, in-process, and final inspections, and inspects setups and fixtures. The role involves maintaining or scheduling maintenance of testing tools, monitoring inspection schedules, and ensuring compliance with inspection requirements. The Quality Inspector is expected to read and analyze blueprints, quality documents, and manuals, and verify measurements and other specifications against plans. A basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools such as calipers, micrometers, depth gauges, optical comparators, and CMM equipment and software are essential. This position is very hands-on with a variety of mechanical inspection tools. Responsibilities • Inspect first articles, in-process parts, and products prior to shipment using gauges, coordinate measuring machines, optical comparators, and vision systems., • Generate spreadsheets for data collection., • Produce first article inspection reports., • Reconcile final inspection documentation for shipments., • Test incoming raw materials., • Use precision measuring instruments including micrometers, calipers, fixtures, and gauges to check work and perform detailed inspections of machined parts., • Read instrumentation and gauges to accurately measure dimensions on parts being machined within specified tolerances., • Wear proper safety equipment and comply with company safety rules at all times.Essential Skills, • Mechanical and technical capacity., • Organizational skills., • Problem-solving and analytical skills., • Time management., • Initiative., • Good problem-solving and conceptual skills., • Blueprint analysis and mechanical system knowledge., • Critical thinking and tool familiarity., • Excellent communication skills to convey detailed instructions to machine operators, and to communicate with customers and engineers regarding designs and drawings., • Mathematical skills., • Ability to successfully multi-task in a fast-paced, high-throughput environment.Additional Skills & Qualifications, • IPC 610 and IPC 620 certifications., • Wire harness inspection experience., • Experience in high-rate manufacturing, quantitative inspection, and data input., • AS 9100 knowledge., • Open plate inspection experience.Why Work Here? The company offers a positive work environment with an emphasis on safety, teamwork, and development. Employees have opportunities for certification on-site if needed, and the facility supports fast-paced manufacturing without the need for a microscope. Work Environment The position is onsite at a new facility with work hours from Monday to Friday, starting at 6:55 AM for a team meeting. The facility provides a supportive environment with all necessary tools and equipment for quality inspections. Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $23.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 25, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Quality Inspector Job Description Under the supervision of the Quality Manager, the Quality Inspector inspects incoming parts and supplies, performs first article, in-process, and final inspections, and inspects setups and fixtures. The role involves maintaining or scheduling maintenance of testing tools, monitoring inspection schedules, and ensuring compliance with inspection requirements. The Quality Inspector is expected to read and analyze blueprints, quality documents, and manuals, and verify measurements and other specifications against plans. A basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools such as calipers, micrometers, depth gauges, optical comparators, and CMM equipment and software are essential. This position is very hands-on with a variety of mechanical inspection tools. Responsibilities • Inspect first articles, in-process parts, and products prior to shipment using gauges, coordinate measuring machines, optical comparators, and vision systems., • Generate spreadsheets for data collection., • Produce first article inspection reports., • Reconcile final inspection documentation for shipments., • Test incoming raw materials., • Use precision measuring instruments including micrometers, calipers, fixtures, and gauges to check work and perform detailed inspections of machined parts., • Read instrumentation and gauges to accurately measure dimensions on parts being machined within specified tolerances., • Wear proper safety equipment and comply with company safety rules at all times.Essential Skills, • Mechanical and technical capacity., • Organizational skills., • Problem-solving and analytical skills., • Time management., • Initiative., • Good problem-solving and conceptual skills., • Blueprint analysis and mechanical system knowledge., • Critical thinking and tool familiarity., • Excellent communication skills to convey detailed instructions to machine operators, and to communicate with customers and engineers regarding designs and drawings., • Mathematical skills., • Ability to successfully multi-task in a fast-paced, high-throughput environment.Additional Skills & Qualifications, • IPC 610 and IPC 620 certifications., • Wire harness inspection experience., • Experience in high-rate manufacturing, quantitative inspection, and data input., • AS 9100 knowledge., • Open plate inspection experience.Why Work Here? The company offers a positive work environment with an emphasis on safety, teamwork, and development. Employees have opportunities for certification on-site if needed, and the facility supports fast-paced manufacturing without the need for a microscope. Work Environment The position is onsite at a new facility with work hours from Monday to Friday, starting at 6:55 AM for a team meeting. The facility provides a supportive environment with all necessary tools and equipment for quality inspections. Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $23.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Huntsville,AL. Application Deadline This position is anticipated to close on Nov 21, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Focus on the core content of the job post, removing all unnecessary metadata, navigation mentions, and special characters.Keep the formatting beautiful and consistent across the platform.

Focus on the core content of the job post, removing all extra metadata, navigation mentions, and redundant headers.Keep the formatting beautiful and high signal to noise ratio.

Job DescriptionDescription: Summary The Maintenance Technician is responsible for the overall maintenance of the physical plant, under the direction of the Maintenance Supervisor and Community Manager. Essential Duties and Responsibilities Include the following. Other duties may be assigned. • Participate in all types of maintenance projects., • Perform electrical repairs on items such as appliances, fixtures, switches, outlets, circuits, etc., • Perform plumbing work such as cleaning stoppages, replacing fittings, etc., • Replace broken glass, tile, carpet, screens, garbage disposals, fixtures, appliances, draperies and locks., • Paint, interior and exterior., • Perform carpentry work such as fitting doors, freeing windows, replacing and building shelves, sanding and refinishing floors., • Assist in custodial work, including sweeping, mopping, vacuuming, emptying trash, cleaning windows, etc., in common areas and in vacancies when necessary., • Assist in grounds work when necessary, including grounds policing., • Repair concrete, masonry, roofing and fencing, when required., • Train other staff members., • Participate in a standby emergency schedule for evening, weekend and holiday coverage., • Be responsible for stock control and utilization of maintenance materials., • Assist the resident manager in scheduling annual apartment inspections. Be responsible for refurbishing of apartments prior to resident occupancy., • Perform scheduled maintenance on all equipment based on the manufacturers recommendations and operating manuals., • Periodically inspect all units, buildings and common areas, performing repairs and janitorial assistance as scheduled., • Have knowledge regarding water and gas meter cutoffs, all apartment and fixture cutoffs, sewer clean-outs, and post a map of same., • Make sure storage areas and entrances are locked, and adequate lighting in those areas is maintained., • Have knowledge regarding contracts and suppliers, their services, goods and prices., • Assist in apartment follow-up inspections., • Maintain adequate stock of supplies and materials, assure workshop/storage areas are organized, clean and safe., • Concern for work-safety programs., • Willingness to pitch in and work in areas other than strictly repair maintenance; i.e. janitorial, custodial, gardening, etc. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); prior maintenance experience or experience in related field. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Must be able to read and write English. Mathematical Skills Must show basic understanding of math. Certificates, Licenses, Registrations Must have a valid driver's license and be insurable. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk and hear. Must be able to climb stairs and ladders and reach heights of 8 feet with the aid of a ladder. No fear of heights (24 feet or more). The employee must regularly lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee frequently works in outside weather conditions and is frequently exposed to risk of electrical shock. The employee occasionally works near moving mechanical parts and in high, precarious places and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. At Freeman Webb, we're not just offering a job, but a fulfilling career in property management. We believe in the power of teamwork and prioritize a supportive work environment where collaboration thrives. Our brand value, "Support Each Other, Above all We're a Team," sets the tone for how we operate. We are committed to working together, empowering one another, and fostering an atmosphere where everyone's opinion and feedback are valued. In addition to a fulfilling work culture, we provide our employees with competitive benefits, including a 401K plan, paid time off, and other valuable perks. We understand the importance of work-life balance and strive to create an environment where our employees can thrive both personally and professionally. When you join Freeman Webb, you become part of a family. We believe in promoting from within and nurturing the growth of our teams. Professional development and consistent training are at the core of our approach, ensuring that our employees have the tools and knowledge to excel in their roles. We celebrate our collective achievements and recognize the contribution of our diverse teams, which has earned us the honor of being named a Top Workplace in multiple cities year after year. If you are seeking a career that offers growth, a supportive team environment, and the opportunity to make a difference, join us at Freeman Webb Company. Together, we inspire each other to take ownership of our actions and create a positive impact. Apply today and embark on a rewarding journey with us.

Demonstrated quality assurance in project planning, monitoring progress, and ensuring all aspects of a project are thoroughly reviewed to avoid errors or oversights. Lessons Learned: Participating in project post-mortem reviews to capture lessons learned and best practices for future projects. Suppo

Focus on the core content of the job post, removing any extra metadata, navigation, and redundant headers.Keep the formatting beautiful and high signal to noise ratio.

Job Description Title: Drone Integrator and Designer Location: Huntsville, AL Position Status: Full Time Work Schedule: Regular hours are Monday - Friday between the hours of 8:00 am – 4:30 pm. Employees may need to adjust work hours during surge situations. Brief Job Description: The Drone Integrator and Designer will lead all aspects of unmanned aerial system (UAS)integration, including planning, execution, analysis, and reporting. This role ensures compliance with applicable regulations, standards, and safety requirements while delivering reliable performance data to support product development. Responsibilities • Develop and oversee new UAS development and creation, • Develop and oversee plans for UAS systems, subsystems, and components., • Guide procedures, including setup, instrumentation, safety oversight, coordination of Test Readiness Reviews, and post-flight analysis., • Ensure compliance with FAA, military, and industry standards., • Supervise and mentor staff and technicians., • Manage budgets, schedules, and performance documentation., • Coordinate with design, software, and systems engineering teams to resolve issues., • Prepare and present detailed test reports and recommendations., • Maintain safety protocols and risk management processes during testing., • Bachelor's degree in Aerospace, Mechanical, Electrical Engineering, or equivalent STEM field., • 5+ years of UAS engineering experience, with 3+ years in a leadership position., • Strong knowledge of Computer Aided Design i.e. Solid works, etc., • Capability to run 3D printer and software for prototype and low rate production, • Proven track record designing and executing flight and system validation campaigns., • Hands-on familiarity with flight test instrumentation, telemetry, ground control systems, and data analysis tools., • Familiarity with FAA and MIL-STD requirements., • Excellent leadership, organizational, and communication skills., • Must be capable of passing a drug screen, • Must be capable of passing a background check Work may involve sitting or standing for extended periods of time. Position may require typing and reading from a computer screen. Must have sufficient mobility to include but not limited to: bending, reaching, climbing, turning, and kneeling to complete daily duties in a timely and efficient manner. There is a possibility that due to parking availability and location of work, walking moderate to long distances may be required. Must be able to lift, move, and transport items frequently over 10 pounds. Work Environment: Generally, work is conducted in an inside office environment, but may also involve some outside work depending on the task. The inside environment may be in an office or cubicle with close quarters, low to moderate noise, and bright or dim lighting. Outside work may include various environmental conditions including warm and cold climates and while on travel. Axxeum, Inc. is an equal opportunity employer. The company will provide equal opportunity in employment to all employees and applicants for employment. No person will be discriminated against in employment because of race, religion, color, sex, age, national origin, disability, genetic information, military status, sexual orientation, gender identity or any other characteristic protected by applicable federal or state law. This policy applies to all terms, conditions, and privileges of employment and all policies of the company. At the time of hiring, employees are required to sign a written statement acknowledging that they are employed at the will of the company and are subject to termination at any time, for any reason, with or without notice, and with or without cause. Employees who do not have an individualized written employment contract or a collective bargaining agreement are employed at the will of the company and are subject to termination at any time, for any reason, with or without cause or notice. At the same time, these employees may terminate their employment at any time for any reasons.

Job DescriptionAre we the road to your future? We are currently searching for an experienced Environmental and NEPA Manager to support our East Gulf located in Alabama. To be considered for this position, applicants must have at minimum 5 years' experience in transportation/NEPA planning. What you’ll be doing: • Prepare NEPA studies for federally funded projects, including Categorical Exclusions (CE), Environmental Assessments (EA), Environmental Impact Statements (EIS) for various transportation project types and sizes, • Coordinate with internal project teams, • Perform site visits for projects as required, • Lead public involvement efforts for environmental projects, • Manage projects to achieve budget, schedule, and quality requirements, • B.S. or M.S. in Planning, Environmental Science, or related field, • 5+ years of experience in transportation/NEPA planning required, • GIS experience is a plus, • Strong communication, interpersonal, and collaborative team skills are required, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI Alabama

Job DescriptionAre we the road to your future? We are currently searching for a highly motivated Roadway Engineer to join our East Gulf Region in Birmingham, Huntsville, and Tuscaloosa, AL. What you’ll be doing: • Engineering design including geometric design of highways and streets, drainage design (hydrology and hydraulics), • Prepare construction plans and project displays, • Assist in roadway plan set design & production including roadway alignments, cross-sections, drainage, maintenance of traffic and erosion and sedimentation control, • Assist in preparing cost estimates, reports, and technical memos, • Bachelor’s degree in Civil Engineering, • 1 – 5 years of experience, • EI Certification or PE License (if eligible), • Knowledge of fundamental transportation standards, • Familiarity with state and FHWA design standards, guidelines, and policies, • Proficient in the use of MS Office tools such as Excel, Word, and Powerpoint, • Experience with computer programs such as MicroStation, ArcGIS, InRoads, various CAD, and OpenRoads Designer, • Self-motivated to meet individual goals and maintain accountability in a team environment, • Able to maintain project schedules, which may require occasional extended hours and overnight travel, • Effective verbal and written communication skills, • General interpersonal skills including active listening, teamwork, responsibility, dependability, leadership, motivation, flexibility, and patience, • ALDOT or local government design experience preferred, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 Alabama

Job DescriptionPlanet Technologies, the Nation’s leading Microsoft services provider to the public sector, is looking for a highly motivated individual to join our growing team as Cybersecurity Analyst. In this role, you will be supporting impactful projects that make a difference for our country. Responsibilities • Monitors networks and systems for security issues, suspicious activities, and compliance., • Assists in investigating security breaches/incidents and documenting findings., • Participates in system analysis, vulnerability identification, and basic compliance testing., • Supports log analysis to identify anomalous traffic or potential data leaks., • Prepares technical summaries and maintains detailed records., • Communicates compliance gaps and remediation steps to stakeholders., • Maintains awareness of vulnerabilities and threat intelligence., • Assists with audits, data calls, and compliance activities., • Contributes to incident response efforts and post-incident reviews., • Supports implementation and monitoring of security controls and toolsets. Qualifications, • 5+ years of cybersecurity experience expected., • Industry-recognized certifications (e.g., CompTIA CySA+, Security+, CEH) may substitute for some experience., • Familiarity with federal security standards and compliance frameworks is an asset., • Ability to follow technical instructions and learn new technologies or regulations in a dynamic environment., • Ability to work on site up to 5 days per week and the ability to keep or hold a Top-Secret Clearance, • #cjPlanet Technologies is the leading provider of Microsoft Consulting Services to public sector and commercial organizations. Planet has significant experience in deploying business intelligence, cloud services, unified communications, and systems management with an emphasis building, deploying, and managing custom solutions that transform the business operations of federal government agencies. Planet Technologies does not discriminate in employment opportunities, terms and conditions of employment, or practices. All qualified applicants will receive consideration for employment without regard to race, age, gender, religious or political beliefs, national origin or heritage, disability, sexual orientation, protected veteran status, or any characteristic protected by law. Federal Agency Clearance Requirements may require up to a 10-year background investigation - US Citizenship (clearable) is required. Salaries for Cybersecurity Analysts at Planet Technologies range from $90,000 and $140,000. Several factors will impact final pay offered to a successful candidate including but not limited to the type and years of experience within the job, clearance level, the type of years and experience within the industry, education, training, etc. Visit to learn more about us. Details about our benefits can be found here Planet Technologies Benefit Guide 2025-2026 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description THIS POSITION IS CONTINGENT UPON CONTRACT AWARD GENERAL DESCRIPTION Responsible for performing maintenance, inspections, and repairs on CH-47 aircraft, ensuring operational readiness and safety. This position plays a critical role in supporting flight operations and requires a strong technical skill set in helicopter systems, components, and safety procedures. This position may require up to 25% travel. DUTIES • Conduct scheduled and unscheduled maintenance on CH-47 aircraft., • Perform troubleshooting and repairs on all aircraft systems., • Perform routine inspections and pre-flight/post-flight inspections in support of flight operations., • Maintain records and maintenance actions in accordance with service guidance., • Use specialized tools and diagnostic equipment in support of maintenance operations., • High school diploma or equivalent required, • Graduate of a military aircraft repairer school for CH-47 aircraft., • FAA A&P license is preferred., • Minimum of 6 years of experience in aircraft maintenance on rotary wing aircraft., • Must be a U.S. Citizen, • Must have or be able to obtain a Secret Clearance To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. • Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day., • Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices, • Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders., • May be required to lift up to 50 pounds and carry for short distances., • May be required to read dials/gauges, identify small objects and hand tools., • Must be able to see imperfections, micrometer readings and other small scales., • Must be able to communicate by voice and detect sound by ear., • Must be able to distinguish color and judge three-dimensional depth. TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Employment Opportunity Employer and a VEVRAA governed Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities. TNC provides all employees and job applicants equal employment opportunities in hiring and promotion without regard to age, sex, sexual orientation, marital status, race, religion, color, veteran status, genetic information, physical or mental disability, national origin or any other reason prohibited by law. #jsfirm TSG maintains a drug-free workplace and perform post offer, pre-employment and random substance abuse testing. Job Posted by ApplicantPro

Job DescriptionSalary: Job Description: Will be responsible for integrating complex systems in a dynamic, fast-paced environment, specifically within the realms of networking and platform systems integration. You will work closely with cross-functional teams to ensure the seamless integration of hardware and software solutions, delivering high-performance systems. The ideal candidate will have experience in networking and integrating aircraft systems, as well asa strong technical background in troubleshooting and system optimization. Key Responsibilities: • Systems Integration: Design, implement, and troubleshoot systems integrations for both networking and aircraft subsystems., • Networking Expertise: Collaborate with the networking team to design and implement reliable and secure network communications for aircraft systems, ensuring optimal data transfer and performance., • Cross-Disciplinary Collaboration: Collaborate with various engineering teams to ensure that all systems components are correctly integrated and satisfy system requirements., • Testing & Validation: Conduct rigorous integration testing, validation, and verification to ensure systems meet performance, reliability, and safety standards., • Troubleshooting & Problem Solving: Investigate and resolve integration issues that arise during development or post-deployment, providing solutions and support to engineering teams., • Documentation: Prepare technical documentation to support software development, system integration, configuration, and validation processes., • Continuous Improvement: Contribute to the development of best practices and processes for integration to improve efficiency and reduce risks. Work Environment: • Office or lab-based, with occasional travel (up to 25%) to customer or test sites as needed. Education: Bachelors degree in Electrical Engineering, Computer Science, Aerospace Engineering, or a related field. Masters degree is a plus. Experience: • 3+ years of experience in systems integration, with a focus on networking and aircraft systems., • Experience with avionics, flight control systems, or mission systems integration in aircraft., • Experience working with Linux Operating Systems., • Solid understanding of network protocols (TCP/IP, UDP, etc.) and how they apply to real-time aircraft communication systems., • Familiarity with industry standards and regulations related to aircraft/ground systems integration. Skills: • Proficiency in systems integration tools and techniques., • Hands-on experience with network configuration, troubleshooting, and diagnostics., • Familiarity with embedded systems and software integration., • Strong analytical and problem-solving skills., • Excellent communication skills to collaborate with technical teams and provide status updates., • Ability to work in a team-oriented environment and manage multiple priorities. Preferred: • Experience with specific communication protocols (1553, UART, etc.)., • Knowledge of systems like radios, GPS, IFF, and other airborne mission systems., • Familiarity with simulation tools used in aircraft integration., • Knowledge of aircraft safety protocols and standards., • Experience working in an Agile development environment.

Job Description: Position Details: • Pay: Average Annual Earnings of $65,000 to $85,000 depending on Route, • Schedule/ Hours: Monday through Friday; Dispatches between 3:00 AM - 5:00 AM; 12–13-hour Routes, • Drop Yard is located in Madison, ALWe Deliver the Goods:, • Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more, • Growth opportunities performing essential work to support America’s food distribution system, • Safe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose: Food and food service delivery drivers fulfill a critical role in the country’s food supply chain. Our delivery drivers not only make sure the customers’ products arrive at their destination at the arranged times and in good condition, but they are the face of our company – building lasting relationships with our customers! The Driver is responsible for driving a tractor trailer or straight truck on intrastate and interstate local, over-the-road (OTR), shuttle, and overnight and drive and drop routes for the purpose of delivering and/or unloading food and food related products to customers in a safe and timely manner and in accordance with Department of Transportation (DOT) regulations. Primary Responsibilities: • Communicates and interacts with customers, vendors and co-workers professionally ensuring questions are answered accurately and in a timely manner., • Functions as a team member within the department and organization, as required, and perform any duty assigned to best serve the company., • Performs all required safety checks (i.e., pre/post trip) including inspections of tractor/truck and trailer according to Department of Transportation (DOT) regulations; inspects tractor/truck and trailer to insure they meet company safety standards and take appropriate action as needed., • Reports all safety issues and/or repairs required., • Follows all DOT regulations and company safe driving guidelines and policies., • Immediately reports all safety hazards. Inspects trailer for properly loaded and secured freight., • Performs count check of items and check customer invoices of products that have been loaded., • Checks and completes in an accurate and in legible fashion all required paperwork associated with freight., • Moves tractor to the loading dock and attach preloaded trailer as needed., • Drives to and delivers customer orders according to predetermined route delivery schedule., • Unloads products from the trailer, transports items into designated customer storage areas., • Performs damage control checks on items, scans, and contact supervisor about removing orders according to company policy., • Verifies delivery of items with customer and obtain proper signatures., • Collects money (cash or checks) where required. Loads customer returns on to trailer and secures trailer doors., • Ensures that tractor, trailer, and freight are appropriately locked and/or always secured., • Unloads damaged goods and customer returns and bring to the driver check-in and complete necessary paperwork. Unloads all equipment, materials and remove trash from trailers as required., • Completes daily record of hours of service and enter in log in accordance with Federal DOT, state, and company requirements., • Performs general housekeeping duties in tractor, loading dock area and keep trailers clear and clean as required., • At the end of the shift secure all equipment and complete all necessary paperwork. Performance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants and other experts builds close relationships with each customer, providing advice on improving operations, menu development, product selection and operational strategies. The Performance Foodservice team delivers delicious food, but also goes above and beyond to help independent restaurant owners achieve their dreams. Awards and Accolades Performance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Machinist B Job Code: 30243 Job Location: Huntsville, AL Job Schedule: 9/80 work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off- 1st Shift Job Description: Aerojet Rocketdyne, an L3Harris Segment, is seeking a Machinist B to work at our state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL. This is a unique opportunity to work at our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. Essential Functions: • Produce parts, components and final assemblies using composite fabrication, metal fabrication, modification, checkout, re-work, quality testing, and assembly utilizing detailed work instructions, schematics, diagrams, layouts or manufacturing test development or diagnostic equipment., • Operation of various machinery and shop equipment which may include but not be limited to ovens, autoclaves, manual lathes, CNC lathes, CNC milling centers, manual mills, boring mills, presses, furnaces, mixers, grinders, swages, paint booths, fume hoods and automated welding equipment., • Fabrication and assembly of piece parts into completed sub-assembly using assembly tools., • M achining of sand mandrels., • Facilitate and conduct OJT training of technicians as required., • Works with management and supervision to meet critical deadlines., • Produce development hardware to support research and development programs., • Troubleshoot processes and identify, modify and/or escalate out of control processes and production escapes., • Coordinate with maintenance, supervision and/or engineers in the set-up and calibration of equipment., • Participate in preventative maintenance activities., • Clean machines, equipment, and work area according to Standard Operating Procedures Qualifications: • Requires a High School Diploma or equivalent with a minimum of 4 years of prior relevant experience; OR 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience Machining. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job DescriptionAbout Us We are a leading travel agency dedicated to creating seamless and unforgettable travel experiences for our clients. Specializing in personalized itineraries across land, air, and sea, we pride ourselves on offering exceptional service and insider expertise. As we expand our offerings, we are seeking a passionate Cruise Planner to design tailored cruise vacations that delight our clients from embarkation to return. Position Overview As a Cruise Planner, you will help clients discover and book their ideal cruise vacation. This role involves curating customized cruise packages, coordinating travel logistics, and ensuring every detail exceeds expectations. From luxury ocean liners to intimate river cruises, you’ll be the go-to expert for all things cruise-related. Key Responsibilities • Consult with clients to identify cruise preferences, including destinations, cruise lines, cabin categories, and onboard experiences., • Research, design, and book customized cruise itineraries and pre- and post-cruise travel arrangements., • Provide expert advice on cruise lines, ships, excursions, dining, and entertainment options., • Build and maintain strong relationships with cruise line representatives and suppliers., • Assist with travel documentation, including passports, visas, and insurance., • Proactively handle special requests, upgrades, and onboard packages., • Ensure clients receive a seamless and personalized travel experience from start to finish., • Stay up to date on cruise industry trends, promotions, and itineraries.Qualifications, • Previous experience in customer service, • Passion for travel and eager to learn., • Excellent communication and interpersonal skills, with a client-first mindset., • Highly organized with attention to detail and problem-solving abilities., • Ability to work independently and as part of a team.What We Offer, • Opportunity to specialize in the exciting and growing cruise industry., • Training and support to enhance cruise expertise., • Access to industry discounts and potential travel perks., • Competitive compensation and performance incentives., • A supportive and collaborative team environment.

Job Description Are we the road to your future? We are currently searching for an experienced East Gulf Alternative Delivery Roadway Design Lead to support transportation design projects in our East Gulf Region. Located in Alabama or Tennessee OR willing to relocate to one of our offices in either state. To be considered for this position, applicants must have, at minimum, 20 years experience. What you’ll be doing: • Serve as a hands-on, project based, Roadway Lead for our East Gulf projects providing roadway discipline leadership, technical expertise, and roadway design production oversight, • Prepare roadway plan set components including plan, profile, cross section, and detail sheets, • Prepare specification packages, • Calculate quantities and prepare construction cost estimates, • Coordinate with clients and sub-consultants, • Develop and mentor roadway staff, • Licensed PE (Alabama and/or Tennessee preferred), • 20+/- years experience, • Experience with DOT’s on Major Highway and Interstate projects, • Alternative Delivery design experience required, • Competent with MicroStation, • OpenRoad Design experience preferred, • Leadership and Team Building experience, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match “For nearly a century, Volkert has done meaningful work that improves our infrastructure and quality of life. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 TN AL

Job Description Radar Test Engineer Position The Radar Test Engineer position is a full-time position. The individual will support Ballistic Missile Defense System (BMDS) Integrated Ground Tests (GTIs), Distributed Ground Tests (GTDs), and Flight Test (FT) events. Responsibilities • Support the installation and checkout of radar mission data and test scenarios;, • Perform analysis of radar systems using simulation software, comparing simulation results against test case design descriptions and test objectives;, • Document and communicate simulation software anomalies/errors;, • Participate in CONOPs, Radar Operator Procedure Development, and Lessons Learned reviews and documentation;, • Generate Quick-Look reports, perform data reductions, and communicate post-test product readiness to analysts and mission leads;, • Operate and sustain the radar representations in the formal BMDS ground test laboratories;, • Interface with the Test Execution Controller (TEC) or Mission Manager during test events;, • Conduct pre-test and post-test meetings to communicate status and review test scenario results and/ or issues;, • Coordinate with customer regarding asset or team availability to participate in test;, • Present status reports to the Mission Manager and/or Mission Lead. Skills and Competencies • BS degree in Engineering, Math or Science is required;, • 5+ years of test experience required, preferably with DoD systems;, • Knowledge of radar principles including detection, tracking, discrimination and resource management is highly desired;, • Knowledge of the BMDS supporting sensors and weapon systems is preferred;, • Experience with Windows and Linux Operating Systems is required;, • Experience with MATLAB and/or other scripting languages is preferred;, • Demonstrate effective verbal and written communication skills;, • Candidate must have an active SECRET security clearance; IERUS Technologies participates in E-Verify.

Job Description Position Title: Sr. Marketing Specialist Position Type: Full-Time Clearance: No requirement Location: Huntsville, AL - Remote may be considered Salary*: $80,000 - $110,000 *Dependent upon qualifications Summit 7 is here to rise above the ordinary. The work we do here goes far beyond day-to-day projects - it further protects the US defense industrial base from cyber threats, fosters thought leadership, and creates growth opportunities. Our support staff, sales team and technicians are all coming together to make a difference. We also recognize that you're a person with life beyond work, that's why we invest in these meaningful health and welfare benefits: • Excellent health/dental benefits from BCBS, • See into the future with our luxurious VSP vision benefits, • Prepare for the long-haul courtesy of our 401k with company matching, • 10 days' vacation, 7 days sick time Essential Functions The Sr. Marketing Specialist is responsible for owning Summit 7's demand generation engine across all digital and campaign channels. This role leads the planning, execution, and reporting of marketing campaigns, paid media, and email workflows, while collaborating with creative, content, events, PR, and analytics teams to ensure alignment and measurable impact. The Sr. Marketing Specialist will serve as the primary point of contact for all campaigns, ensuring that initiatives (events, PR releases, paid ads, etc.) are launched, tracked, and reported through the appropriate systems with ROI and lead attribution. They will drive conversion rate optimization and assists with user journey development to maximize the effectiveness of all lead generation efforts. Responsibilities • Campaign Ownership & Lead Management, • Act as the campaign owner, coordinating with internal teams to ensure all campaigns are created, executed, and tracked from start to finish., • Ensure all leads are captured and entered into the system and tied to the right campaigns and workflows., • Plan, launch, and manage all marketing campaigns, including post-event lead entry, workflow creation with the content/design team, and reporting., • Collaborate with creative, PR, and events teams to ensure all initiatives are tied to campaigns, including tracking custom URLs and lead sources., • Email, Workflows & Automation, • Own email marketing campaigns and workflow execution (writing and sending emails, coordinating design/content, and setting up automation)., • Help guide the content team on topics and formats most effective for driving leads., • Create and optimize user journeys with the content team to ensure conversion rates are maximized., • Paid Media & Digital Optimization, • Own paid media strategy and execution, including vendor management, campaign management, optimization, and reporting., • Optimize the website for lead generation, including landing pages, calls to action, and overall user experience., • Reporting & Analytics, • Manage campaign reporting, working closely with the data analytics team to deliver accurate, actionable insights., • 5-7 years of B2B marketing experience, with proven success in lead generation, paid media, email marketing, and campaign management., • Demonstrated ability to manage paid media campaigns end-to-end, including vendor relations, targeting, optimization, and reporting., • Strong understanding of conversion rate optimization, website optimization, and user journey development., • Proficiency with marketing automation and CRM platforms (e.g., HubSpot, ServiceNow, etc.)., • Experience collaborating with creative, content, PR, events, and analytics teams to deliver integrated marketing campaigns., • Excellent analytical skills with the ability to interpret data and present performance insights to leadership., • Strong organizational skills with the ability to manage multiple projects and deadlines simultaneously. This position may involve access to information subject to U.S. export control laws, including the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). Qualified applicants will be considered regardless of national origin or immigration status. If a candidate does not meet the definition of a "U.S. Person" (as defined in 22 CFR § 120.15), the company will assess whether an export license is required. If a license is required, any offer of employment will be contingent upon the candidate's eligibility for, and the company's ability to obtain, such a license in accordance with U.S. law. A "U.S. Person" includes U.S. citizens, lawful permanent residents, asylees, and refugees. Work Conditions Work is typically performed in an office environment. Must be able to remain in a stationary position for extended periods of time. The person in this position may need to occasionally move about inside the office to access file cabinets, office machinery, etc. Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer. May occasionally need to position self to maintain computers, including under the desks and in the server closet. The person in this position frequently communicates with employees and clients. Must be able to exchange accurate information in these solutions. Summit 7 Systems is an equal opportunity/ affirmative action employer and an alcohol and drug-free workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Summit 7 Systems requires background checks. Any offer of employment is contingent upon the results of a reference/background check. We are a drug and alcohol-free workplace and require pre-employment drug screening.

Job Description Job Summary: VSolvit is seeking a Market Research Analyst 2 to join our dynamic Business Development team, with a primary focus on Federal civilian agencies. This mid-level position plays a critical role in researching and analyzing Government information technology contracting opportunities, acquisition trends, and competitive landscapes. The analyst will develop actionable reports on opportunities, clients, and competitors and will maintain and update VSolvit’s customer relationship management (CRM) system with relevant opportunity data. This position requires strong research, analytical, and communication skills to support changing priorities and needs of capture managers, proposal managers, and executives. The candidate must be highly organized, attentive to detail, and comfortable supporting multiple simultaneous assignments, be able to deliver measurable results on a daily basis, and be able to work independently in a remote work environment. Candidates for this position must be eligible to attain a security clearance. The ideal candidate will bring prior experience with civilian agency contracting environments (such as DHS, HHS, VA, GSA, DOE, USDA, or Treasury), have a keen eye for detail, and be able to work both independently and collaboratively in a fast-paced environment. As with any position, additional expectations exist. Some of these are, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with the assigned supervisor, and staying focused on the assigned tasks. Responsibilities: • Conduct in-depth market research on Federal agencies and programs to identify new contract opportunities, • Analyze customer needs, acquisition strategies, and buying patterns to support business development targeting, • Track and forecast Government acquisition and spending trends, providing actionable insights to capture and proposal teams, • Collect and analyze data on competitors, including strengths, weaknesses, pricing strategies, and differentiators; prepare competitive intelligence reports, • Conduct partner research to identify qualified teaming partners and assess alignment with VSolvit capabilities, • Monitor industry publications, agency forecasts, and acquisition portals (e.g., SAM.gov, FPDS, USASpending.gov), • Use GovCon research platforms (e.g., GovWin IQ, Federal Compass, Bloomberg Government) to build and maintain saved searches, alerts, and watchlists, • Prepare market research reports, SWOT analyses, and opportunity briefings for leadership review, • Support capture and proposal teams with data gathering, partner coordination, and customer outreach strategies, • Assist with preparation for industry days, conferences, and civilian-focused trade shows, • Maintain CRM opportunity pipelines with accurate, timely updates, • Bachelor’s degree in Business, Marketing, Political Science, Economics, or related field, • 3+ years of experience in market research, business development, or competitive analysis in Federal contracting, • Demonstrated customer service-oriented attitude in support of project managers, • Demonstrated experience with research and analysis of civilian agency opportunities, • Strong proficiency with Microsoft Office Suite (Word, Excel, PowerPoint) and Google Workspace, • Experience conducting qualitative and quantitative research, interpreting industry data, and preparing reports, • Strong organizational and time-management skills, with the ability to prioritize multiple tasks, • Strong written and verbal communication skills, • Must be a U.S. Citizen, • 5+ years of experience supporting market research or competitive analysis in the Federal civilian space, • Demonstrated knowledge of specific civilian agencies (e.g., HHS, DHS, VA, USDA, DOE, Treasury), • Experience conducting opportunity assessments and mapping to company capabilities, • Familiarity with capture/proposal processes in the Federal contracting lifecycle, • Prior experience preparing SWOT analyses, Black Hat reports, or similar competitive intelligence deliverables, • Experience with CRM systems and pipeline management (e.g., Salesforce, HubSpot), • Proposal development or capture support experience in Federal contracting Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job DescriptionEmergency Medicine Physician Position with National Wound Physician Group Clinical satisfaction, autonomy and flexibility, work-life balance No Nights, No Call, No Weekend Clinical Responsibilities Become an expert in wound management, learn from highly qualified wound-certified physician trainers and Fellowship Directors. Utilize cutting-edge clinical technologies and the latest wound care modalities. •Our physicians provide bedside wound care in over 3,200 facilities across 28 states.•We provide physician-level wound management training and a wound fellowship, giving you all the knowledge and expertise for clinical excellence.•W2 physicians earn, on average, $300,000 per year plus benefits for a 30-hour work week (Part-time opportunities available).•Paid Training. Practice Overview: •Full-time work: Monday - Friday (7 am - 4 pm) or part-time available.•No call / No weekend clinical responsibilities.• Physicians deliver modern wound management at the bedside in the post-acute care setting: Skilled Nursing Facilities and Long-Term Acute Care Hospitals.• Our physicians conduct weekly wound rounds at each facility.• Part-time role is a minimum of 3 days per week. The full-time role is 4-5 days per week.• This is a mobile practice: The physicians visit facilities in a 40 – 60 mile radius of the practice location.• Our physicians visit 2-3 facilities per day, treating approximately 20-30 patients per day.• Clinical documentation is at the point of care, in real-time during clinical rounds, using our proprietary wound-specific EMR.• Paid Training is provided during onboarding + 6 months wound care fellowship• W2 employment contract (No work visa sponsorship is available) Benefits: •Full health and retirement benefits provided.•Medical Malpractice with tail is provided.•Mileage reimbursement. Requirements: •Active unrestricted medical license (MD/DO) in the state you wish to practice•Minimum commitment of 3 weekdays per week.What We Look For: Join our team and enjoy an individualized practice with flexibility and work/life balance. If you want to become an expert in your field, learn from highly qualified physician peers, utilize cutting-edge technologies, and spend your time focused on patients and not paperwork, then Vohra may be the right physician practice for you. We place a high value on clinical experience, cultural fit, and passion for helping wound care patients. We have three specific requirements:

Job Description * POSITION IS HYBRID IN CHESAPEAKE, VA * Job Summary The Payroll Manager is responsible for overseeing payroll staff. Their duties include hiring and training Payroll Specialists, coordinating with the finance and HR departments to process payroll for new employees or monitor payroll schedules and managing employee payroll earnings and deductions. As with any position, additional expectations exist. Some of these include, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with assigned supervisor(s), staying focused on the assigned tasks, and completing other tasks as assigned. Responsibilities • Review and approval of payroll processing runs and ability to independently prepare payroll processing when needed, • Reconciliation of payroll to quarterly payroll tax reports; strong working knowledge of payroll tax forms, • Maintains payroll information by designing systems; directing the collection, calculation, and entering of data, • Updates payroll records by reviewing and approving changes in exemptions, insurance coverage, savings deductions, and job titles, and department/ division transfers, • Pays employees by directing the production and issuance of paychecks or electronic transfers to bank accounts, • Prepares reports by compiling summaries of earnings, taxes, deductions, leave, disability, and nontaxable wages, • Determines payroll liabilities by approving the calculation of employee federal and state income and social security taxes, and employer’s social security, unemployment, and workers compensation payments, • Balances the payroll accounts by resolving payroll discrepancies, • Provides payroll information by answering questions and requests, • Maintains payroll guidelines by writing and updating policies and procedures, • Complies with federal, state, and local legal requirements by studying existing and new legislation; enforcing adherence to requirements; advising management on needed actions, • Maintains employee confidence and protects payroll operations by keeping information confidential, • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies, • Completes operational requirements by scheduling and assigning employees; following up on work results, • Maintains payroll staff by recruiting, selecting, orienting, and training employees, • Maintains payroll staff job results by counseling and disciplining employees; planning, monitoring, and appraising job results, • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies, • Contributes to team effort by accomplishing related results as needed, • Bachelor’s Degree in Finance, Business, or other related fields, • 2+ years’ experience supervising a payroll department, • 6+ years’ overseeing end-to-end multi-state payroll processing, • Proven experience managing payroll processes, staff, compliance reporting, and tax filing, • 2+ years’ working with JAMIS software or similar DCAA compliant software, • Master’s Degree in related field, • CPP, FPC, CPA or similar certification, • 4+ years’ experience supervising a payroll department, • Proven experience with compensation and wage structure, benefits administration, worker compensation, employment law, and accounting skills, • Proven experience processing international payroll and tax filing Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job Description Who We Are! Aetos Systems, Inc. was founded in early 2007 to provide a unique work experience. Employees are the foundation of our business. Our leaders work hard every day to empower and support our employees in the development of their careers, giving back to their community and providing their expertise and innovations to our customers - solving real world business problems. Our culture focuses on our people -- our strongest asset -- ensuring they have an environment to provide best-in-class service and solutions to our customers. We always strive to do the right thing. Have you imagined working for a dynamic small business where you are heard, highly regarded and able to do what you love all in one package? This is your opportunity! Join now! Job Summary We are seeking an efficient and detail-oriented Staff Accountant to join our accounting department. The Staff Accountant will be responsible for various general ledger, accounts payable, accounts receivables, and payroll tasks. Duties and Responsibilities • Manage day-to-day accounts payable activities., • Process direct and indirect invoices for payment., • Record monthly credit card statement transactions., • Process Accounts Payable EFT batches., • Process expense reports., • Prepare General Ledger entries as needed., • Handle payroll responsibilities to include:, • Payroll tax and pension activities., • Post bi-weekly leave accruals., • Manage timesheet and labor responsibilities, including:, • Reconciling labor between internal and external timekeeping systems, • Weekly labor processing, • Perform general accounting tasks, such as:, • Analyzing monthly and weekly General Ledger balances, • Assisting with financial audits, • Processing Accounts Receivable payments Required Minimum Education • A bachelor’s degree in a Business-related field, • Deltek Costpoint experience may be considered in lieu of education. Required Skills, Qualifications, Technical Experience, etc. • Proficiency with Microsoft Excel and Deltek Costpoint., • Ability to work independently and collaboratively in a fast-paced, high-volume environment with an emphasis on accuracy and timeliness., • Effective communication skills and the ability to interact professionally with employees and customers., • Excellent attention to detail, organizational skills, and commitment to meeting deadlines. What we offer • Competitive salaries, • Education and professional development assistance, • Multiple healthcare benefit packages & 24/7 virtual on-demand doctors’ visits, • 401K, • Dave Ramsey’s SmartDollar Financial Wellness program, • Civic Leave – time off to support your favorite charity or community, • Paid time off for personal leave and holidays

Job DescriptionThreat Tec, LLC, a rapidly growing Veteran-Owned Business, is the leader of Operational Environment (OE) replication and Threat Emulation/Wargaming solutions. Threat Tec brings innovative thinking and extensive experience to complex challenges for public and private sector customers. We work alongside our nation's defenders, developing solutions that drive success and protect our future. Join a team that is embodied by an unwavering commitment to professionalism, honesty, and innovation. Job Description: As an Engineer/Scientist on the RS3 UAS Contract, you will be integral to the development and implementation of advanced solutions for unmanned aerial systems (UAS). You will collaborate with senior engineers and scientists to execute tasks aligned with project goals and technical requirements. This role requires expertise in either engineering or science, with a focus on problem-solving, technical analysis, and system evaluations. You will be expected to work independently, while also contributing to the mentorship of junior staff. A Secret Clearance is required to ensure secure operations within the project parameters.Education and Experience: • Bachelor’s Degree in Engineering or a related discipline, or equivalent experience., • Must meet DoD 8570.01-M IAT II requirements., • Minimum of 5 years of related job experience, gained post-degree from an accredited institution., • Engineers must have received their engineering degree from an accredited program of study., • Scientists must have received a science degree from an accredited college or university., • Must be capable of receiving guidance from senior-level managers/engineers/scientists and working independently to accomplish assigned tasks.Responsibilities:, • Support the RS3 UAS Contract through engineering or scientific tasks, ensuring compliance with project goals and technical standards., • Collaborate with senior team members to design, develop, and implement UAS solutions., • Conduct technical analysis, assessments, and evaluations related to UAS engineering or scientific projects., • Provide guidance and mentorship to junior engineers and scientists as needed.Skills and Qualifications:, • Strong understanding of engineering or scientific principles, methodologies, and practices related to UAS., • Proficient in technical analysis, problem-solving, and system evaluations., • Excellent verbal and written communication skills., • Ability to work effectively both independently and within a team., • Active DoD 8570.01-M IAT II certification preferred. #TT We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description * POSITION IS ONSITE IN CHESAPEAKE, VA * VSolvit is searching for a Facility Security Officer to join our team. The Facility Security Officer (FSO) manages, administers, and coordinates the DOD or other industrial security program and other security activities to ensure compliance with government and company security policies and procedures for multiple locations (Chesapeake, VA and Huntsville, AL). The FSO is responsible for operation and streamlining security administrative procedures, security inventory control, and supporting the interaction between company employees and our government customer for security related items. As with any position, additional expectations exist. Some of these include, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with assigned supervisor(s), staying focused on the assigned tasks, and completing other tasks as assigned. Requirements * Working knowledge and experience with the National Industrial Security Program Operating Manual (NISPOM) including the proper understanding of classifications, markings, and safeguarding * Uphold all aspects of security related processes and procedures for each contract * Maintain Security Clearances in DISS at the facility cleared level and below for all contracts * Conduct all required Security Trainings and Briefings and keep record both physical and electronic copies * Prepare and administer all documents required for personnel to obtain appropriate badging and access to government facilities and property including but not limited to TASS, CVS, VAL, and SAAR forms * Demonstrated knowledge of government security including DD254s and security classification * Review and implement federal security regulations that apply to company operations * Maintains all security documentation and files in accordance with DSS requirements * Obtain approvals, interpretations, and acceptable deviations for compliance with regulations for each contract with various government agencies * Investigate security violations and prepares reports specifying preventive action to be taken * Processes personnel clearances via JPAS, coordinating visit requests both on JPAS and via hard copy * Collaborate with government customers on security related issues * Ensure that classified and FOUO information entrusted to the company is properly safeguarded as outlined in federal controlling instructions * Preparation, management and interfacing with DCSA during audits * Interface effectively with Senior Management, DoD Officials and Customers * Knowledge of use and application of US government online program, Electronic Questionnaires for Investigations Processing (eQIP) for SF86 application for clearance Basic Qualifications * Facility Security Officer (FSO) Certification * 3+ years of experience as AFSO or FSO * 3+ years of experience working with government security and information assurance processes * 3+ years of experience with protection requirements for handling and safeguarding Personally Identifiable Information (PII) * 3+ years of experience with DISS, NISS, and e-QIP * 3+ years of experience working with Corporate Executives including the following: provide status updates, ensure compliance with NISPOM requirements and provide guidance on security related questions or concerns * 3+ years of experience with MS Office Suite * 3+ years of experience providing employees with personnel security guidance, consistent with the 13 adjudicative guidelines, to best assist them managing their clearances * Demonstrated ability to in-process and maintain +300 employees * Excellent oral and written communication skills * Superior organizational skills * Must be eligible for or have active DoD Top Security Clearance * Must be a U.S. Citizen * If applicable: If you are or have been recently employed by the U.S. government, a post-employment ethics letter will be required if employment with VSolvit is offered Preferred Qualifications * 6+ years of government contracting experience * BS/BA Degree in related field * Completion of FSO Program Management for Non Possessing (Preferred) Facilities or completion within twelve month from start date * Member of NCMS Society of Industrial Security Professionals Company Summary Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job Description Business Development Manager – Federal Services (Remote) Location: Remote (U.S.-based only) Clearance Requirement: Must be able to obtain TS/SCI Citizenship: U.S. Citizenship required About Essnova Essnova Solutions, Inc. is an award-winning, SBA 8(a) and HUBZone certified small business delivering innovative technology solutions, professional services, geospatial services, healthcare solutions, and environmental services to federal, state, local, and commercial clients. Recognized as #163 on the Inc. 500 list of fastest-growing private companies in America and honored as the USDA Small Disadvantaged Contractor of the Year , Essnova is on a mission to empower those who serve by leveraging relentless speed, unmatched efficiency, and bold, innovative solutions to achieve the extraordinary. Our recent prime contract awards on the GSA OASIS+ vehicle across four socioeconomic categories and five critical service domains further solidify our position as a trusted and capable partner for complex federal missions. At Essnova, we are united by exceptionalism, driven by innovation, and obsessed with our customers' success. We offer the dynamism and impact potential of a small business, combined with the resources, contract vehicles, and opportunities characteristic of a company punching well above its weight. Role Overview We’re hiring a Business Development Manager to lead growth efforts across DOD federal agencies. You’ll be responsible for identifying, qualifying, and winning new service contracts, developing key partnerships, and managing capture strategy from pipeline through proposal. This is a high-impact, high-visibility role with direct access to senior leadership. What You’ll Do • Identify and pursue new service contract opportunities across federal agencies, • Lead full lifecycle business development from opportunity identification to post-award handoff, • Build and manage relationships with government buyers, primes, and teaming partners, • Create and execute capture strategies, win themes, and teaming plans, • Negotiate teaming agreements and define partner roles and pricing, • Contribute to compliant, compelling proposal efforts with cross-functional teams, • Track opportunities and pipeline progress using CRM tools, • Drive at least 30% year-over-year revenue growth Requirements What You Must Have • U.S. Citizenship (required), • Ability to obtain a TS/SCI clearance (required), • 10+ years of business development experience in federal IT/professional services, • Proven ability to close multi-million dollar contracts, • Experience with federal contract vehicles (GSA, IDIQs, GWACs, BPAs), • Familiarity with OASIS, STARS, or similar IDIQ ecosystems, • Strong negotiation, capture, and partnership-building skills, • Experience collaborating with proposal and legal teams, • Bachelor’s degree in Business, Marketing, or a related field, • MBA or advanced degree, • Strong analytical and written communication skills Benefits • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off + federal holidays, • Rapidly growing, innovation-focused GovCon firm, • High-ownership environment where your wins matter, • Direct access to leadership, zero bureaucracy, • Culture built on speed, agility, and results

Job Description We are seeking a full-time Real Estate Closing Secretary with at least one year of experience. Responsibilities would include professionally communicating with brokers, builders, agents and lenders along with the preparation of loan closing documents including closing disclosures, lending packages, deeds and mortgages, title policies and other documents related to the real estate closing. Preferred qualifications include; Knowledge of the loan transaction process from execution of contract through post closing Excellent organizational skills Strong attention to detail Self starter, able to work with limited supervision but work well with others Telephone etiquette, personable with positive attitude Can manage stress and able to multi task and prioritize work load Experience with Word Perfect, Microsoft Word, Microsoft Outlook, Microsoft Excel and Title Express a plus. NO EXPERIENCE WILL NOT BE CONSIDERED. Job Type: Full-time

Job Description Rogers Group, Inc., headquartered in Nashville, is a privately held aggregates and asphalt highway construction company operating and meeting customer needs in 12 states with over 3,000 employees. RGI, established in 1908, has the distinction of being recognized as the largest privately held aggregate producer in the United States. We have 86 quarries and 56 asphalt plants across Tennessee, Mississippi, Georgia, Alabama, South Carolina, North Carolina, Kentucky, Arkansas, Texas, Indiana, Illinois, and Ohio. Rogers Group Inc. is currently seeking an Experienced Motor Grader "Finish Grade" Operator in the Tuscumbia, AL / North Alabama operations area, Alabama SMA reporting to the Area Construction Manager & Superintendent. The successful candidate will have a demonstrated ability to lead safety, quality, and revenue generation throughout our existing operations and additional operations through growth. Job Details: \n • Wages start at $30.00hr,\n, • Starting wage will be higher based on verifiable experience. \n, • Fulltime/Permanent \n, • Day Shift\n, • Weekend work may be required\n, • Overtime available along with extensive medical and retirement benefits\n\n Job Responsibilities: \n • Operate motor grader and other heavy or grading equipment to complete grading and fine grading tasks.\n, • Ability to operate equipment with a high degree of competency, skill, and proficiency and in challenging and unique terrain environments.\n, • Perform servicing and maintenance of equipment as trained and directed by management.\n, • Perform daily pre-and post- inspections with appropriate documentation in compliance with company policies.\n, • Effective communication skills applicable to position.\n, • Minimum of 1-3 years of experience in finish grading Required!\n, • Individual must be dedicated to working safely at all times\n, • Experienced working with GPS control preferred\n, • Flexibility to work overtime, weekends, and nights when necessary\n, • Team player\n, • Valid driver's license\n, • Additional:\n, • Distinguish and understand signals.\n, • Read and understand grade stakes.\n, • Use both hands and feet at the same time.\n, • Work in an environment with noise levels that may require hearing protection.\n, • Must be able to hear and understand commands from supervisors, warnings from fellow workers, and alarms on equipment.\n, • Able to use mechanic's hand tools and tape measure.\n, • Able to crawl and climb on, over, under and inside construction equipment.\n, • Lift and carry objects and materials of various weights up to 100 pounds.\n, • Good vision, both close-up and long-distance, and ability to look forward, side to side, and toward the rear of equipment.\n, • Must have good reliable transportation to make it to and from work.\n, • Self-motivated individual - must be able to perform required duties independently, without constant supervision.\n, • Must be willing to work overtime, weekends, and extended hours as needed.\n, • Must be able to work outside in all types of weather and tolerate being exposed to loud noises.\n, • Willingness to work in a team environment and assist co-workers or supervisors with other duties as required.\n, • Able to provide valid documentation for the I-9 Immigration requirement.\n As a Rogers Group employee, you will have access to our competitive company perks, including: \n • Medical, Dental, Vision Insurance plus Health Savings Account with annual company contribution.\n, • Company provided Group Life and Accidental Death & Dismemberment insurance.\n, • Retirement 401(k) with company contribution and match at one year of service.\n, • Company provided Short- and Long-Term Disability.\n, • Paid Holiday's including Christmas shutdown between Christmas and New Years Day.\n, • Paid vacation available after 180-day probationary period and accrued based on years of service.\n, • Annual performance-based merit increases.\n, • Career growth/advancement opportunities.\n\n RGI EEO Statement It is the policy of Rogers Group, Inc. to recruit, hire, and promote individuals based on demonstrated merit and qualifications. We are committed to providing a work environment that is free from discrimination, harassment, and retaliation as protected by applicable federal, state, or local laws. All applications are accepted online at . About Us Rogers Group, Inc., headquartered in Nashville, is a privately held aggregates and asphalt highway construction company operating in 12 states with over 3,000 employees. RGI, established in 1908, has the distinction of being recognized as the largest privately held aggregate producer in the United States. RGI EEO Statement It is the policy of Rogers Group, Inc. to recruit, hire, and promote individuals based on demonstrated merit and qualifications. We are committed to providing a work environment that is free from discrimination, harassment, and retaliation as protected by applicable federal, state, or local laws. All applications are accepted online at .

Job Description Ready to launch your career? RGNext operates, maintains, and sustains mission-critical systems to provide safe and effective launch, testing, and tracking of Department of Defense, civil, commercial and international space lift vehicles. We support ballistic missile, guided weapon and aeronautical tests and evaluations as well as support space situational awareness operations and experiments to defend the United States to ensure our nation’s safety. Our employees serve on the forefront of global defense and space operations. We offer our team of experienced, professional employees an environment of challenging, stimulating and personally and professionally rewarding career opportunities. This position is located on Kwajalein Atoll in the Marshall Islands. Essential Functions • Work on the land and sea-based Flight Safety systems located in the tropical Marshall Islands and aboard the USAV Worthy. Systems include processing and display computers, networks, telemetry, communications, transmitters and marine., • Propose, plan, manage and execute improvement projects. This can include interfaces with government, vendors, cyber, information services, telemetry, communications, supply chain and contracts. Complete progress, test and analysis reports as needed., • Identify and lead process improvement initiatives., • Operate, configure, troubleshoot, and document the systems for mission support. This includes post-mission analysis and documentation., • Support mission operations on Kwajalein Atoll or aboard the vessel USAV Worthy. Travel to Hawaii and CONUS if needed., • Participate or lead troubleshooting efforts, fault detection, fault isolation, repair, testing, and reporting. Includes championing efforts to prevent reoccurrence., • Author and contribute to mission preparation and execution documentation. Interface directly with Reagan Test Site (RTS) customers., • Contribute to overseeing other tasks related to property, calibration, secure room, facilities, and COMSEC., • Provide support for RF Safety to include surveys, analysis, and incident investigation., • Other duties as assigned.Required Skills, • Ability to lead or participate in capturing, defining and evaluating technical requirements., • Strong analytical skills., • Excellent written and oral communication skills., • Proficient in Microsoft Office Suite (Outlook, Word, PowerPoint, Excel) and Microsoft Project., • Ability to identify issues and improvement opportunities. Champion a plan of action and win over others as needed., • Experience in dealing with ambiguity and competing interests., • Ability to prioritize and manage concurrently running projects., • Able to perform activities on towers and elevated structures using the proper PPE., • Familiar with routed and switched IP networking desired., • Ability to work at sea on the USAV Worthy for multi-week stretches. Required Experience, • Bachelor’s Degree in engineering or a related STEM discipline., • Two (2) or more years of military, technical, or post-University degree work experience in related field., • Desired experience:, • Experience in a technical leadership role on a project, team or staff level., • Experience working in a safety-oriented system or product line, desired., • Exposure to requirements capture and life cycle development tools (Jira, Gitlab, DOORs, SharePoint)., • Exposure to Six Sigma, CMMI, INCOSI, FMEA, FMECA, FHA, or other engineering related practices., • Software development experience, desired., • PMP, Security+, Network+, CCENT, and/or CCNA certifications, desired., • Must be able to obtain and maintain a DoD Secret security clearance which requires U.S. Citizenship., • Willingness and physical ability to work aboard a ship at-sea for multiple weeks., • Must be able to relocate to the United States Army Kwajalein Atoll, Marshall Islands., • Must be able to obtain and maintain a U.S. passport., • Able to travel to neighboring islands via helicopter and small plane. Must have a waist circumference of 42” or less to ride in helicopters. RGNext offers our team of experienced, professional employees an environment of challenging, stimulating and personally and professionally rewarding career opportunities and growth. Employees enjoy a robust benefit package on day one, which includes medical, dental, vision, disability and life insurances, generous Paid Time Off and holiday pay, a retirement savings plan with a company match and vesting on day one! Other benefits include flexible scheduling, access to on-base fitness centers and more! We are committed to providing employees a quality work/life balance in a productive, evolving environment. Note: This job description describes the general nature of the duties and requirements of the job. It is not intended to be an exhaustive list or to limit the supervisor's ability to modify work assignments as appropriate. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state or local laws.

Job Description IERUS specializes in electromagnetic spectrum technologies and design for RF, IR, and optical applications. IERUS also supports customers with a diverse set of competencies including software development, air and missile defense, and systems engineering. IERUS develops value for our defense and commercial customers through accelerations of the technology life cycle: identifying, creating, transitioning, and producing technologies with integrity of purpose and product. IERUS is always looking for bright, talented, motivated and dedicated employees in the engineering field. IERUS offers competitive compensation packages, retirement options, and benefits packages. To learn more, please visit . Description: IERUS Technologies, Inc., is seeking a Missile Defense Systems Analyst to join a diverse and flexible team. The ideal candidate will have 3 or more years of experience with Missile Defense Systems tests and analysis. Basic Qualifications: • Must be an US citizen;, • An active Secret clearance or higher is required;, • Bachelor's degree (or higher) in Engineering, Software Engineering, or Computer Science;, • Experience with radar waveform generation and signal processing chain;, • Ability to lead the group that develops plans to test/exercise software-intensive system in various multi-system venues (hardware-in-the-loop and simulation tests/exercises coupled with human-in-the-loop exercises); plans must include/address test/exercise methodology, detailed test/exercise procedures, identification and integration of test/exercise resources, data collection, trans/post-test analysis of results;, • Test/exercise execution in accordance with test/exercise plans in a variety of venues. Near-real-time quantitative/qualitative analysis of test/exercise results during and immediately after test/exercise execution;, • Interpretation of test/exercise results and communication of resulting information to testers, non-testers, and senior program leadership;, • Documentation of test/exercise, to include architecture, problems/lessons learned results versus objectives;, • Development of operational procedures for execution of MDS components;, • Troubleshooting skills on multi-disciplined computer systems and networks required;, • Knowledge of Linux and Windows Operating Systems required;, • Candidate must have familiarity with DoD System Engineering processes as they apply to system testing, to include software test methodologies and terminology along with associated test tools., • Candidate must have developed software/hardware system test or exercise plans alone and/or as part of a small team, using overall and event-specific program objectives, functional/performance requirements, and planned technical capabilities;, • Led/overseen the integration of a system under test and associated resources into a variety of test environments;, • Executed planned test procedures, using GUIs and Linux/Windows commands;, • Evaluated/analyzed test or exercise results in order to characterize system performance;, • Knowledge of the Ballistic Missile Defense System and its elements is highly desired; Huntsville, AL IERUS Technologies is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other federally protected class. IERUS Technologies participates in E-Verify.