Trabajos facilities en ChesterfieldCrear alertas

Job Title: Caretaker (Split Site - Primary Schools) Location: Across two primary school sites within the same trustWorking Hours: 7:30am - 3:30pm flexible Monday to FridayStart Date: ASAP after the Easter break (from 13th April) About the Role:We are seeking a reliable and experienced Caretaker to work across two welcoming primary school sites within the same trust. This is a fantastic opportunity for someone who takes pride in maintaining safe, clean, and well-presented school environments. You will be responsible for the day-to-day running of site operations, ensuring both schools are opened on time and maintained to a high standard throughout the day. Key Responsibilities: • Opening and securing both school sites, • Carrying out general maintenance and minor repairs, • Grounds-keeping and ensuring outdoor areas are safe and tidy, • Monitoring health & safety compliance across both sites, • Previous experience as a Caretaker, Site Supervisor, or Facilities Manager, • Strong practical maintenance skills, • A proactive and reliable approach to work, • Good understanding of health & safety regulations, • Competitive daily rates, paid via our easy-to-use timesheet system, • Access to long-term and permanent opportunities, • Dedicated consultant support throughout your placement, • Free access to over 2,500 CPD courses to support your development through our partnership with The National College, • Flexible working options to suit your lifestyle Apply now to start your next role this April! #INDSHEFF

Data Centre Facilities Lead – Chesterfield (Onsite) My client develops, owns and operates AI infrastructure across the UK, transforming legacy industrial and energy sites into modern, sustainable data centres. They are now looking for a hands-on Data Centre Facilities Lead to support the safe, reliable and efficient operation of critical environments. The Role This position sits at the core of mission-critical operations, overseeing electrical, mechanical and cooling systems to ensure maximum uptime and performance. The successful candidate will take ownership of day-to-day operations, maintenance programmes, incident response and continuous improvement across the site. Key Responsibilities • Oversee operation and maintenance of electrical, mechanical and HVAC/liquid cooling systems, • Drive preventive and predictive maintenance to ensure uptime and reliability, • Manage critical infrastructure including UPS, generators, PDUs, CRAC/CRAH, chillers and BMS/EMS, • Ensure compliance with safety standards, permits, LOTO and regulatory requirements, • Maintain technical documentation (SOPs, SLDs, asset registers), • Supervise contractors and support upgrades, retrofits and commissioning Experience Required • Strong hands-on experience with data centre or mission-critical infrastructure (or similar environments), • Expertise across electrical and/or mechanical systems and HVAC, • Experience with BMS/EMS systems and fault diagnosis, • Knowledge of safety and compliance standards, • Ability to work on-site in Chesterfield 5 days per week

PA to Regional MD/Office Manager - North Midlands We are looking for a highly organised, proactive, and professional Personal Assistant/Office Manager to support our Regional Managing Director and leadership team at our North Midlands Regional Office. This is a varied and fast-paced role where no two days are the same. You will be the central hub of the regional office ensuring the Managing Director’s time is effectively managed, key meetings run smoothly, and the office operates efficiently. If you thrive on organisation, enjoy problem solving, and take pride in keeping things running seamlessly behind the scenes, this role offers a fantastic opportunity to make a real impact. The role: As Personal Assistant to the Managing Director, you will provide high-level administrative and organisational support, ensuring the MD’s time, priorities, and communications are managed efficiently. Alongside this, you will take on the role of Office Manager, overseeing the day-to-day running of the office, coordinating facilities management, supporting the regional team, and ensuring operational processes run smoothly. You will develop a strong understanding of the business and build relationships with colleagues across the organisation, becoming a trusted point of contact for both internal and external stakeholders. Key responsibilities - PA duties - • Manage and prioritise the Managing Director’s diary, workload and meeting schedule, • Handle incoming calls for the MD, ensuring clear messages and effective follow-up, • Organise internal and external meetings, including regional site visits, • Coordinate Board meetings, including preparing board packs and documentation, attending meetings, taking minutes and distributing actions, organising venues and catering, • Coordinate follow-up information requests from the Group Managing Director, • Manage Data Subject Access Requests (DSAR) in line with GDPR, • Handle customer complaints escalated to the MD, working with Customer Services to gather information and prepare responses, • Support the implementation of Health & Safety policies in collaboration with the Group SHE Advisor, • Line manage the Office Receptionist, • Oversee building and facilities management, including waste management and pest control, • Coordinate fire and safety compliance, including servicing of fire equipment and alarm testing, • Order IT equipment and prepare induction documentation for new starters, • Manage the regional fleet vehicles, including collections, returns, valeting, repairs and insurance claims, • Provide IT coordination, requesting equipment and managing replacements while maintaining accurate records for new starters and leavers, • Support budget management and monitor office expenditure, • About you -, • We are looking for someone who is organised, proactive, and comfortable managing multiple responsibilities in a busy environment. You will have - • Experience in a similar PA, Executive Assistant, or Office Manager role, • Excellent written and verbal communication skills, • Strong organisation and time management abilities, • Exceptional attention to detail and accuracy, • The ability to prioritise and multitask in a fast-paced environment, • Confidence working independently and using your own initiative, • Strong discretion and understanding of confidentiality, • Proficiency in Microsoft Office 365 (desirable) Why join us? This is a key position within the regional team where you will work closely with senior leadership and play a vital role in ensuring the office and management team operate efficiently. You will be trusted with real responsibility, enjoy variety in your role, and have the opportunity to contribute to the continued success of the region. If you are a highly organised professional who enjoys being at the centre of a busy, dynamic office, we would love to hear from you. We believe Harron Homes is a place for everyone, no matter where you come from, what you look like or how you identify. Please note due to the volume of applicants, if you have not heard from us within 14 days, please accept this as confirmation that we will not be progressing with your application further on this occasion.

Join Our Growing Team at Harmony Fire – Help us Make Every Home Safer! Since 2017, Harmony Fire has rapidly become one of Europe's fastest-growing companies, ranking as the 72nd fastest-growing company in the region. But we’re not stopping there. We’re on a mission to grow even further, knowing that the more we grow, the greater the impact we can have – from reaching more people and increasing our social impact to offering more opportunities for our talented team. We’re passionate about making a difference, and we’re obsessed with delivering the highest quality in everything we do. Our goal is simple: we want every resident to feel safe at night, knowing their home is 100% compliant and protected. By providing exceptional service, upholding our values, and going above and beyond, we can achieve our vision of making the UK safer, one home at a time. Our Unique Methodology: Think – We challenge pour people to innovate and come up with creative solutions that build a safer, more efficient, and risk-aware future for the business. Protect – We turn research into practical, resilient applications that ensure businesses and individuals can thrive in safer, better-protected environments Sustain – We build lasting partnerships based on trust and understanding clients’ needs to deliver better value As one of the top 25 best service companies to work for in the UK, we’re looking for new team members to join us. Could this be you? What We Look For: At Harmony Fire, we value people who embody these core principles: • Athletes Grit: We want team members who show unwavering determination and resilience. You don’t give up, even when faced with challenges. You’re driven to go the extra mile, pushing yourself to reach new heights of success., • Captains Duty: Leadership isn’t just about a title. It’s about taking responsibility, fulfilling commitments, and always acting with integrity. We believe everyone should take ownership of their actions and contribute to the team’s success., • Fun-Loving Heart: We believe work should be a positive, supportive experience. You’ll contribute to a great work environment by caring for others, spreading positive energy, and enjoying the work you do. Key Responsibilities: • Commercial delivery of projects – to time and on budget, through effective valuations, forecasting revenue, managing handover, ensuring budget sufficient for works, controlling expenditure sign off including prelims, labour, subcontractors & suppliers, monitoring & tracking costs, protecting GP, owning purchasing decisions, signing off payment applications. Identify and resolve with clients any variations., • Deliver an outstanding customer experience – ensuring the ‘Harmony experience’ is delivered through great communication, building positive relationships, resolving issues promptly and ensuring team & subcontractors deliver to the client and Harmony’s expectations., • People management – recruitment, onboarding/induction, addressing issues, ensuring the team is engaged and productive, team training and progression, manage performance, utilisation of people especially direct labour., • Quality control –, works are certifiable and compliant, and to an exceptional standard meeting expectations as set out by Harmony and the requirements of the client. Regular spot checking and auditing of works and sites, ensuring work delivered to the highest standard and certifications when project completed., • Process Management – adherence to all statutory and Harmony processes and procedures – making sure all in the team do the same., • Health and safety – responsible for the implementation of the Harmony H&S policy. Ensuring all work on sites is conducted in a safe manner through induction, regular training and auditing., • External Supplier Management– management of costings, procurement of material and management of labour including sourcing subcontractors as appropriate., • Managing communication – clarity of communication with clients and regular, clear communication with the Pre-Con team and supply chain clearly translating expectations and progress. This role manages the delivery relationship with the client. Qualifications/ Experience: • 3+ years’ experience in construction project management, • Experience of running multiple projects to time and on budget., • BM Trada qualification desirable, • Excellent planning, budgeting and prioritisation skills., • First class written and verbal communication skills Why Harmony Fire? We are dedicated to providing: • A collaborative and supportive environment where you can grow and advance your career., • Tools and resources to help you do your best work., • The opportunity to learn from some of the best professionals in the industry, always eager to share knowledge and expertise., • A Bespoke Personal Development Plan for every employee to help you reach your potential., • Ongoing training, coaching, and mentoring to keep you growing., • Modern, spacious workspaces equipped with state-of-the-art facilities. What We Offer: • Lunch, snacks, and refreshments – including fresh fruit and our popular ‘Take Away Friday’., • Unlimited holiday provision – take the time you need to recharge., • Bonus scheme – earn up to 50% of your annual salary based on performance., • Team socialising budget – we believe in having fun and bonding as a team., • Family-friendly policies – including enhanced maternity and paternity leave., • Cycle to work scheme – promoting health and sustainability., • Reward and Recognition scheme – including exciting European mini-breaks for top performers., • Two company-wide events each year – we celebrate our achievements together., • Auto-enrolment pension scheme – planning for your future. Ready to Join Us? If you’re looking for a company that values your growth, supports your ambitions, and allows you to make a real impact, Harmony Fire is the place for you

Enjoy a career without limits, earning up to 75% of your billing. We are seeking legal professionals that are keen to work on a consultancy, fee sharing basis. Taylor Rose is a top 60 law firm with over 25 offices nationwide. We are offering you a unique opportunity to take back control of your life and earnings. Choose to work from home, one of our offices or both! We are looking for individuals and groups of Solicitors, FCILEx or Licensed Conveyancers with 4 years PQE + to join our consultancy. Why choose us? • Earn up to 75% of what you bill; your split will not drop below 70%., • Choose your own clients, fees, hours and volume of work., • Work from home, 100 days access to hot-desking facilities., • PII cover up to £20 million., • Access to nationwide offices and meeting rooms., • Free calls through our app., • Immediate access to our accreditations., • Fully optimised CMS and electronic systems., • Access to business development., • Dedicated liaison team., • Technical head for ops, legal support and training. And much more. So, if you want a career without limits and freedom, then we may be your next move. To find out more, contact us now to chat confidentially with one of our advisors. PS We have more avenues for professionals wanting to be office-based, working as part of a team or have different qualification levels!

Enjoy a career without limits, earning up to 75% of your billing. We are seeking legal professionals that are keen to work on a consultancy, fee sharing basis. Taylor Rose is a top 60 law firm with over 25 offices nationwide. We are offering you a unique opportunity to take back control of your life and earnings. Choose to work from home, one of our offices or both! We are looking for individuals and groups of Solicitors, FCILEx or Licensed Conveyancers who have expertise in residential or commercial property in the private and/or public sectors with 4 years PQE + to join our consultancy Why choose us? • Earn up to 75% of what you bill; your split will not drop below 70%., • Referral of larger and established clients, • Immediate access to our accreditations and lender panels, • Choose your own clients, fees, hours and volume of work., • Work from home, 100 days access to hot-desking facilities., • PII cover up to £20 million., • Access to nationwide offices and meeting rooms., • Free calls through our app., • Fully optimised CMS and electronic systems., • Access to business development., • Dedicated liaison team., • Technical head for ops, legal support and training. And much more. So, if you want a career without limits and freedom, then we may be your next move. To find out more, contact us now to chat confidentially with one of our advisors. PS If you have less than 4 years experience you may be able to join us as a fee earning consultant, contact us for more details.

Astute's Power Team are working with a global technical services and engineering consultancy to recruit for a Principal Integrity Engineer, specialising in Pressure Systems, to join their expanding Asset Integrity management team. Considering making an application for this job Check all the details in this job description, and then click on Apply. This is a senior, permanent opportunity where you'll lead the delivery of high-value engineering solutions, supporting major clients across the Conventional Power and Clean Energy sectors - including CCGT, Biomass and Energy from Waste facilities. Candidates must have a degree in a relevant field, have at least 5 - 10 years Power Generation experience and be a Subject Matter Expert in PSSR / Asset Integrity / Mechanical Plant. If you would like to discuss this role & the package available, please get in touch. Responsibilities and duties of the Principal Integrity Engineer role: You will be responsible for: • Carrying out integrity assessments of defective or degraded power plant components operating at both low and high temperatures, using techniques such as reverse engineering calculations, fracture mechanics and finite element analysis (FEA)., • Ensuring compliance with relevant legislation and standards, including the Pressure Systems Safety Regulations 2000 (PSSR)., • Supporting and delivering power plant inspections, including steam and water pressure parts, boiler tube surveys and structural/support assessments., • Evaluating materials performance, degradation mechanisms and remaining life to inform asset management decisions., • Providing mechanical engineering expertise to support plant operations, maintenance and long-term reliability., • Developing and implementing risk-based inspection (RBI) strategies., • Reviewing inspection findings and making informed run / repair / replace recommendations., • Producing clear, high-quality technical reports and project deliverables within agreed timescales and budgets., • Preparing technical proposals, tender submissions and supporting business development activities., • Providing technical guidance and mentoring to junior engineers., • Maintaining up-to-date knowledge of industry standards, legislation and best practice. Professional qualifications We are looking for someone with the following: • At minimum a degree in mechanical engineering or similar, • Ideally qualified with a masters, • Chartered Engineer or working towards professional registration is desirable Personal skills The Principal Integrity Engineer role would suit someone who has: • Extensive Power Generation experience is a must, ideally at minimum 10 years, • Familiar with Pressure Systems Safety Regulations 2000 and other relevant legislation, • Experience with Integrity assessment of defective power plant components - low and high temperature (e.g. reverse code calculation, fracture mechanics, finite element analysis)., • Strong organisational and project management skills Salary and benefits of the Principal Integrity Engineer role • Competitive Salary, • Flexible and hybrid working., • Ad-hoc travel across UK & Europe, • Profit share., • Company pension contributions., • Private medical insurance., • Health and wellbeing - digital GP, access to wellbeing app and support., • Enhanced maternity and paternity leave., • Sustainable benefits such as salary sacrifice electric vehicles and cycle to work schemes. INDPOW #LI-DG1 Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. xrnqpay We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.

Type: Casual HoursSalary: £30.47 Per HourClosing Date: Sunday, 19th April 2026We have an exciting opportunity for a Lecturer in Agriculture to join our team at Loughborough College Group, based at Brooksby College. In this role, you will use your expertise to inspire the next generation of agricultural professionals—helping students understand not just how things are done, but the vital why behind modern agricultural practice. As an Agriculture Lecturer, you will deliver teaching across our land-based provision, utilising a wide breadth of agriculture knowledge and experience. Your teaching will directly contribute to shaping the future of a dynamic and rapidly evolving industry. Responsibilities of this role include; Planning, delivering, and assessing engaging lessons across crops, plant and soil and estate skills. Supporting and guiding students through practical and classroom-based learning Developing course materials and contributing to the ongoing improvement of the Land based curriculum. Assessing and reviewing students progression in the workplace. Ensuring high standards of health, safety, and welfare across all teaching and practical activity areas. What we are looking for; Strong, up-to-date industry experience in agriculture—ideally with knowledge of crops, machinery, estate maintenance, or general farm operations. A passion for teaching and inspiring the next generation, with the ability to explain both theory and practical application clearly. Excellent communication and organisational skills, with confidence delivering to learners of varying abilities. A recognised teaching qualification (DTLLS, PGCE, or equivalent) or a willingness to work towards one. It is essential candidates have a full driving licence and the access to a vehicle to use when visiting students in the workplace. Whether you’re currently working within the agricultural sector and seeking your first teaching opportunity, or already have experience in education, we are looking for someone with a genuine passion for innovation—bringing fresh ideas and emerging technologies into the learning environment. With an extensive 850-acre estate, including a mixed-use livestock and arable farm, Brooksby College offers an exceptional practical setting. Our students benefit from a rich blend of classroom learning, demonstrations, and hands-on experience, giving them a strong foundation for successful careers within the industry. As part of our dedicated land-based team, you will contribute to the planning, delivery, and ongoing development of our courses. You will bring excellent subject knowledge, strong industry insight, and the ability to apply a range of engaging, effective teaching methods. Loughborough College Group is formed of Brooksby College, Loughborough College, Stephenson College and IGNITE Performing Arts. We have a vast curriculum across campuses offering challenging and engaging learning experiences for our students. We are and have consistently invested in providing our learners and employees with an outstanding and unrivalled range of modern facilities and resources. Loughborough College Group is striving to attract, develop and retain the very best people by offering a motivating and inclusive workplace in which talent is truly recognised. We are committed to promoting a diverse and inclusive community with the belief that diversity plays an important role in the success of the college. We are proud to have achieved the Investor in Diversity award and we actively encourage applications from individuals who are currently under-represented and from all areas of the community. Alongside this, we are a disability confident employer, and we welcome everyone to consider becoming a part of our journey. As well as our commitment to your professional and personal development, we also offer a generous benefits package including: A competitive pension scheme On-site parking Subsided nursery fees Generous Maternity/Paternity pay Fantastic CPD and inclusive resources for development Opportunities of volunteering within local community and charities We offer a range of family friendly, inclusive employment policies, flexible working arrangements and agile working where the business allows. We provide staff forums, staff working groups for sustainability, staff steering groups for Investors in Diversity and support services to support with mental health and wellbeing for staff from different backgrounds. Kindly be advised that we are unable to provide skilled worker sponsorship for this position. Applicants must have the right to work in the country without the need for sponsorship. Loughborough College Group is committed to safeguarding and promoting the welfare of all students and expects all staff to share this commitment. Please note, all applicants will be subject to an enhanced DBS check. If you require any support to apply for this job, please email

Company Description Great Bear (Part of the Culina Group) provides distribution services to FMCG clients. Customer centric service focus is delivered through a site-level empowered culture. At Culina we have a winning culture, we believe that our culture is one of the reasons our company continues to thrive A place where you're valued, challenged, and inspired! Job Description We would like to present you with an exciting opportunity for a Transport Planner to join our friendly team at ourMarkham Vale siteon a full time permanent basis! Salary:£31,804 per annum. Working hours:Monday-Friday, 9am-5pm. As a Transport Planner you willoverseethe day to day planning of the transport operation. A highly motivated and driven individual, you will be experienced at working in a busy transport department, able to deal with day to day challenges and provide cost effective solutions to the customer. Key Duties of a Transport Planner: • Subcontracting and planning orders out of multiple warehouse facilities and manufacturing sites across the UK., • Planning daily workload for a fleet: vehicles based on and off site., • Dealing with queries and issues by telephone, fax and email from our customers, sub-contract hauliers and warehousing sites., • Liaising with Traffic and Administration teams to ensure the high...

Bricklayer The Army United Kingdom Full-time; Permanent £26,334 a year (after training) Build bridges, buildings, runways and more across the world. As a full-time soldier, entry-level Bricklayer in the British Army, youll: • Become a qualified bricklayer and concreter ready to work on infrastructure projects, • Learn general construction, scaffolding, concreting, block laying and task planning, • Learn to work under tough conditions across the world, • Be between 16 years 6 months and 35 years 6 months, • Have a GCSE Grade A-C/9-5 or Scottish National 5 in Maths, English Language and one other subject, • Be able to pass a basic fitness test. All potential applicants are encouraged to scroll through and read the complete job description before applying. Set yourself up for life. From the start of your training, youll earn £26,334 a year which will go up as you progress in your career. From your first day of training, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the training you need. Step 1 is your initial military training teaching you how to be a soldier which will be basic military training if youre a Junior Soldier and adult basic training if youre a Regular Soldier. Step 2 will be 12 weeks at the Royal School of Military Engineering where youll learn military engineering skills including demolition and bridge building. Step 3 will be 33 weeks of technical training at the Royal School of Engineering learning about brickwork, scaffolding and concreting. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. Youll even get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. xrnqpay You Belong Here.

Trainee Surveyor Do not wait to apply after reading this description a high application volume is expected for this opportunity. The Army - United Kingdom From £26,334 a year Be at the heart of building projects across the world. As a full-time soldier, entry-level Surveyor in the British Army, youll: • Help on building projects such as new bases, runways and more, • Use the latest technology to map out the construction sites and create designs, • Get first-class training in technical drawing, surveying, IT and more, • Work all over the world on projects from combat to disaster relief Set yourself up for life. From the start of your training, youll earn £26,334 a year which will go up as you progress in your career. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training with us, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the training you need. Youll even get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. xrnqpay You Belong Here.

Company Description A high number of candidates may make applications for this position, so make sure to send your CV and application through as soon as possible. My Client is a Northwest-based RICS Chartered Quantity Surveying Practice with over 40 years of experience in providing professional, client-focused cost consultancy services to the public and private sectors. Using both traditional and modern quantity surveying techniques, they help clients maximize value and deliver high-quality projects on time and within budget. Their expertise includes cost management, forecasting, and risk management, with a commitment to delivering personalized service by involving a Partner in every project. With extensive experience across sectors such as healthcare, education, stadia and sports facilities, industrial, commercial, leisure, and retail, they are dedicated to high standards and exceptional results. Role Description They are now seeking a skilled and experienced Senior Quantity Surveyor to join the team. This is a full-time, on-site role based in Bolton. The Senior Quantity Surveyor will be responsible for preparing cost estimates, managing project budgets, conducting feasibility studies, and coordinating tender documents. xrnqpay The role also involves performing valuations, negotiating contracts, and ensuring project delivery within agreed timelines and budgets, maintaining excellent client communication throughout the project lifecycle. Qualifications • Experience in cost estimation, cost management, and project budgeting, • Proficiency in preparing tender documentation and conducting procurement processes, • Strong skills in valuation, financial analysis, and forecasting, • Ability to manage risk assessment and deliver projects within established budgets and timelines, • Expertise in contract negotiation, dispute resolution, and client engagement, • Bachelor's degree or equivalent qualification in Quantity Surveying or a related field, • Membership in RICS or progress toward achieving it, • Effective communication, analytical skills, and attention to detail, • Experience in multiple sectors such as healthcare, education, commercial, or industrial construction is a plus

Electrical Maintenance Engineer Location: Chesterfield Salary: £42,000 DOE Reporting to: Technical & Maintenance Manager Shifts: Days, Full time May involve out of hours work, weekends, or on-call duties. Please read the following job description thoroughly to ensure you are the right fit for this role before applying. Generations People is recruiting for an exciting opportunity, for an Electrical Maintenance Engineer to join a manufacturing company, an established, and stable engineering team based in Chesterfield. Purpose of Electrical Maintenance Engineering is to carry out electrical maintenance, installation, and repair work on plant machinery, equipment, and facilities to ensure maximum operational uptime and compliance with health and safety regulations. Responsibilities for the Electrical Maintenance Engineer role: Diagnose and repair electrical faults in machinery and equipment. Perform preventative and reactive maintenance on electrical systems including motors, control panels, PLCs, conveyors, and lighting systems. Supervising and carrying out planned maintenance routines (PPM) as per schedule, including PAT Testing. Read and interpret technical drawings, electrical schematics, and manuals. Ensure all electrical work complies with relevant regulations and company safety standards. Assist in the installation and commissioning of new equipment. Liaise with other maintenance staff, production teams, and contractors. Supervise Contractors when on site. Maintain accurate records of maintenance activities and parts used. Respond promptly to equipment breakdowns to minimize downtime. Contribute to continuous improvement initiatives and energy efficiency projects. Ensure all duties are carried out safely within the company Health & Safety requirements. Work in industrial environments, including noisy or confined spaces Use of PPE is mandatory. Qualifications & Experience: NVQ Level 3 in Requirements for Electrical Installations; Inspection & Testing Electrical Equipment Strong understanding of City & Guilds 18th Edition Wiring Regulations (BS 7671). Time-served apprenticeship in electrical engineering (desirable). PLC fault finding and basic programming knowledge (advantageous). PAT Testing certification. Skills Required: Proven experience in a similar maintenance electrician role within an engineering or manufacturing environment. General Maintenance work. Strong fault-finding and problem-solving skills. Ability to work independently and as part of a team. Good understanding of health and safety standards and safe working practices. Ability to work under pressure and manage time effectively. Multi-skilled (mechanical skills advantageous). Flexible and adaptable to changing priorities. Strong communication and teamwork skills. Self-motivated with a proactive approach. Ability to manage time / workload. Good communication skills, and able to coach and mentor where required. xrnqpay Keen eye for quality and detail Good problem-solving skills. Can-do positive attitude and energy Good team member and contribute in a positive way to the development of the team and business

Part TimeJoin The Gym Group - and achieve your Personal Best Are you a passionate and people-focused Level 3 qualified Personal Trainer looking to build your career in a vibrant, supportive environment? At The Gym Group , we're not just a gym-we're a nationwide community making fitness accessible to all. With over 240 locations across the UK , we lead the way in providing a high value, 24/7 fitness experience that's inclusive, innovative, and engaging . Why Choose The Gym Group? We put people first-our members and our trainers! Here's why joining us is the best move for your career: ✔ Unrivalled Growth & Training - Our industry-leading induction and ongoing development programs give you the confidence and skills to grow your career and unlock new opportunities. . ✔ Flexibility that Works for You - Choose the hours that suit your lifestyle, with financial security through a guaranteed salary . ✔ Cutting-Edge Facilities - We invest millions every year in refurbishing our gyms and keeping them fitted out with the latest equipment. ✔ Official Hyrox Partner - Be part of the latest fitness trends with dedicated Hyrox training sessions in 120+ gyms nationwide. ✔ Supportive & Inclusive Community - Be part of a team that celebrates diversity, champions collaboration, and helps you succeed. Your Benefits as a Fitness Trainer (Employed Role): ✔ Guaranteed Salary & Financial Security - Enjoy a stable income while doing what you love. ✔ Flexible Contracts - You can choose the hours you are contracted to. ✔ Funded First Aid Qualification - We've got you covered. ✔ Free Gym Membership for you + a friend or family member. ✔ Work-Life Balance - With holiday pay, sick pay, and an Employee Assistance Programme for mental health and financial support. ✔ 24/7 GP Access - Skip the queues and get expert advice anytime. ✔Tooth Fairy - Your smart dental companion - Supporting your oral health with expert guidance. ✔ Exclusive Discounts at top retailers. ✔ Pension Scheme & Share Options - Plan for your future with confidence. Want to Offer Personal Training Services too? We've Got You Covered with our Personal Trainer Rental Agreement : 🔹 Zero-Risk Start - First month's rent 100% free! 🔹 Keep 100% of Your Earnings - being self-employed means no cut for us, no limits, and no sneaky licence fees. 🔹 Ongoing Career Development - to advance your learnings and grow your earnings! 🔹 Free Promotion & Support - Get your name out there with in-gym advertising and social media exposure. 💪 Ready to take your PT career to the next level? Join a community that supports your growth, celebrates your success, and helps you thrive. 📩 Apply now and let's get started! Need assistance? If you have a disability or condition that makes it difficult for you to complete your application online please email your cv to or alternatively call the TGG Recruitment team on and someone will be more than happy to support you. We also want to put it out there that we actively encourage applications from a diverse demographic and we are passionate about your culture and value alignment. We want this to be a match that works for you as much as for us!

Role Title: Quantity Surveyor Skills, Experience, Qualifications, If you have the right match for this opportunity, then make sure to apply today. Location: Derby Role Purpose: You will be responsible for commercially managing projects for multiple projects based at our Rolls-Royce project offices at Derby. This is a great opportunity to develop your career and work on multiple projects from cradle to grave with full responsibility for commercial delivery. You will actively seek to minimise the costs of a project and enhance value for money, while still achieving the required standards and quality for our client. Key Responsibilities • Oversee all commercial aspects of construction projects including contract administration, cost management, and financial reporting. Develop and maintain project budgets, forecasts, and cash flow projections, commercial negotiations with contractors, suppliers, and consultants. Manage change control processes and variations to ensure optimal commercial outcomes., • Administer the Client NEC Option C contract, and Subcontracts issued to supply-chain. Review contract terms, conditions, and amendments and engage with the business to gain approval. Ensure compliance with contractual obligations and manage dispute resolution processes. Coordinate with Senior Leadership Team on contractual matters., • Identify, assess, and mitigate commercial risks throughout the project lifecycle. Implement robust cost control systems and monitor expenditure against approved budgets. Conduct regular cost-benefit analyses and provide recommendations for cost optimisation., • Build and maintain relationships with clients, contractors, consultants, and internal stakeholders. Lead commercial discussions in project meetings and present commercial reports to senior management and client boards. Coordinate with quantity surveyors, project managers, and construction teams to align commercial objectives., • Prepare comprehensive commercial reports including monthly cost reports, cash flow forecasts, and final accounts. Analyse project performance against commercial targets and identify areas for improvement., • Provide input to potential tenders on the project and assist in the Go/No-go process., • Commercial acumen, • Ability toreview weekly, monthly, programmes of works, • Have a through understanding of delay and disruption programmes, • Experience of using Evolution MX System (Finance) or other similar systems., • Experience of preparingmonthly valuations and final accounts, and Cost and Value information for monthly reviews, • Preferred Experienced in NEC3 - Issue and management of Early Warning Notices / EWN Register, Risk Register, Compensation Events and alike (not essential as training can be provided), • Monitors subcontract activities, measure and respond appropriately with applicable notices, • Preparation of Cost reconciliation statements, • Help identify savings and value engineering, • Prepare Subcontracts and record and document information including registration of interest, • Cash management: Commercial processes involved with debt recovery, retentions and cash flow, • Measurement of works and agreements with subcontractors, including placement of sub-contract orders (T&Cs), valuing applications, measurement of variations and final account agreement, • Holds a qualification in Quantity Surveying orConstruction Management, • Membership of professional organisation such as RICS / CIOB (preferred), • Experience of working in industry as a Quantity Surveyor / Commercial Manager within the building/construction/building service industries. Those wishing to develop experience welcome., • Competitive salary & negotiable salary depending on experience, • 25 days holiday plus bank holidays JLL is a Fortune 500 global powerhouse in commercial real estate services, operating in over 80 countries with more than 100,000 employees worldwide. As one of the industry's most respected leaders, JLL provides comprehensive solutions spanning property management, facilities services, investment management, leasing, and strategic consulting to Fortune 500 companies, institutions, and governments globally. The Workplace Management business in the UK delivers high quality projects for Premium clients across the UK including Rolls-Royce and HSBC. If youre looking to step up your career, JLLs Workplace Management business is the perfect professional home. At JLL, youll have a chance to innovate with the worlds leading businesses, put that expertise into action on landmark projects, and work on game-changing facilities and maintenance initiatives. Youll also make long-lasting professional connections through sharing different perspectives, and youll be inspired by the best. xrnqpay Were focused on opportunity and want to help you make the most of yours. Achieve your ambitions join us at JLL!?

Plasterer and Painter The Army United Kingdom £26,334 a year (after training) Work on building projects around the world. As a full-time soldier, entry-level Plasterer and Painter in the British Army, youll: • Add finishing touches to buildings including headquarters, hospitals and military bases, • Master trades including plaster boarding, painting and tiling, • Become an expert in skills like glazing and scaffolding, • Carry out work on a variety of military and civilian projects, • Be between 16 years 6 months and 35 years 6 months, • Have a GCSE Grade A-C/9-5 or Scottish National 5 in Maths, English Language and one other subject, • Be able to pass a basic fitness test. Find out more about this role by reading the information below, then apply to be considered. Set yourself up for life. From the start of your training, youll earn £26,334 a year which will go up as you progress in your career. From your first day of training, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the training you need. Step 1 is your initial military training teaching you how to be a soldier which will be basic military training if youre a Junior Soldier and adult basic training if youre a Regular Soldier. Step 2 will be 12 weeks at the Royal School of Military Engineering where youll learn military engineering skills including demolition and bridge building. Step 3 will be 24 weeks of technical training at the Royal School of Engineering learning about dry lining, painting, wall and floor tiling, planning and site safety. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. Youll even get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. xrnqpay You Belong Here.

Vehicle Mechanic (No Experience Needed) Not sure what skills you will need for this opportunity Simply read the full description below to get a complete picture of candidate requirements. The Army - United Kingdom From £26,334 a year Keep us on track. As a full-time, entry-level Vehicle Mechanic in the British Army, youll: • Keep the Army's vehicles available in barracks and on operations, • Service and maintain all vehicle types from Tanks to HGVs, • Conduct preventative maintenance, • Work in line with Army policy on vehicle maintenance and Health and Safety guidelines Set yourself up for life. During your initial training, youll earn £18,687, after which your salary will rise to £23,496. If you set your mind to it, you could reach Corporal within 5 years, earning £33,065. Youll also receive 38 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training with us, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the entry-level training you need. Youll even get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. xrnqpay You Belong Here.

Are you a Calibration Engineer seeking to join the world's leading calibration services company, offering flexible work options and excellent career growth opportunities? If so, we have an exciting opportunity for you as a Calibration Engineer at one of our sites across the UK. Are you the right candidate for this opportunity Make sure to read the full description below. About the Role Joining our team as a Calibration Engineer, you will be responsible for calibrating a variety of measuring instrumentation and repair facilities to both ISO9001 and UKAS accredited in accordance with Company Procedures, UKAS regulations and recognised specifications. A successful candidate will be expected to independently maintain relevant records of work, data and results in a traceable and auditable manner utilizing EMS management systems. Benefits • Competitive salary, • Continuous development and training plan, • 25 days holiday and the option to buy/sell days, • Flexible working options, • Access to the Trescal PerksHub, • Employee well-being programme, • Medical Health Cash xrnqpay Plan, • Pension and Life Assurance Scheme, • Cycle to work scheme, • Ideally a technical qualification such as HND, HNC, NVQ/BTEC Level 3 or above, • Knowledge of BS EN ISO/IEC 17025:2017, • Good understanding of calibration practices and theories

Carpenter and Joiner The Army United Kingdom £26,334 a year (after training) Master your craft and learn to use it all over the world. As a full-time soldier, entry-level Carpenter and Joiner in the British Army, youll: • Plan carpentry and joinery tasks from sketches and apply them in field, • Learn to use and maintain workshop machinery, • Prepare timber for use, manufacture joints, use adhesives, produce windows, door frames and fitments, • Carry out general construction work including first-fix timber frames and second-fix joinery fitments, • Construct scaffolding, interpret scaffold terms and erect access scaffold and install ladders, • Install partitions, floors, roofing, timber-framed buildings, formwork and shoring, • Be between 16 years 6 months and 35 years 6 months, • Have a GCSE Grade A-C/9-5 or Scottish National 5 in Maths, English Language and one other subject, • Be able to pass a basic fitness test. Submit your CV and any additional required information after you have read this description by clicking on the application button. Set yourself up for life. From the start of your training, youll earn £26,334 a year which will go up as you progress in your career. From your first day of training, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the training you need. Step 1 is your initial military training teaching you how to be a soldier which will be basic military training if youre a Junior Soldier and adult basic training if youre a Regular Soldier. Step 2 will be 12 weeks at the Royal School of Military Engineering where youll learn military engineering skills including demolition and bridge building. Step 3 will be 21 weeks of carpentry training including using machinery and hand tools to make timber building materials. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. Youll even get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. xrnqpay You Belong Here.

Are you an experienced engineering professional ready to lead technical teams and drive operational excellence? Do you want to join a global leader in calibration services with a strong focus on sustainability and career progression? If so, we have an exciting opportunity for you as a Technical Lead Engineer at Trescal. Apply promptly! A high volume of applicants is expected for the role as detailed below, do not wait to send your CV. About the Role Job Purpose Responsible for conducting specialist and complex calibration and repair operations developing and following procedures and ensuring compliance with Client contractual and KPI obligations. Key Responsibilities Calibration of measuring instrumentation to National UKAS standards. Identify and develop productivity improvement opportunities and support operational efficiency projects. Maintain calibration instrumentation, equipment, and facilities to required standards. Analyse complex technical problems and deliver solutions where precedent may not exist. Propose & drive continuous improvement to processes Conduct all duties in accordance with Company Health and Safety Procedures, Policies and Safe System of Work. Complete all assigned Quality and Continuous Improvement activities in accordance with Company Procedures. Maintain and produce accurate Calibration Records enabling the production of Calibration Certificates. Produce, review, develop and audit automated and manual Calibration Procedures in accordance with Company requirements and from Clients and Auditor recommendations. Provide technical support to colleagues on request in line with capability. Lead, co-ordinate and facilitate Technicians and Engineers (not supervise) work; assist in their formal orientation and training. Maintenance of Calibration Certification and files. Participate in Trescal Interlaboratory measurement audits. Participate in external/internal audits as required by the Trescal Quality Manager within the customer/Trescal facility. Occasionally you may be required to perform other tasks which are not included in the above description but are within the capabilities of the individual and where necessary training will be given. Benefits • Competitive salary, • Continuous development and training plan, • 25 days holiday and the option to buy/sell days, • Flexible working options, • Access to the Trescal PerksHub, • Employee well-being programme, • Medical Health Cash Plan, • Pension and Life Assurance Scheme, • Cycle to work scheme Formal qualification in a relevant engineering discipline or extensive demonstrable experience in and understanding calibration, both practical and theory. Strong knowledge of BS EN ISO/IEC 17025. Strong understanding of Windows-based and Laboratory automation software. xrnqpay Advanced and specialized expertise with considerable work experience Good dexterity in order to undertake manual adjustments on high accuracy instrumentation. Key Performance Indicators Sales, EBITDA Turnaround time, on time delivery

Company Description Great Bear (Part of the Culina Group) provides distribution services to FMCG clients. Customer centric service focus is delivered through a site-level empowered culture. Apply promptly! A high volume of applicants is expected for the role as detailed below, do not wait to send your CV. At Culina we have a winning culture, we believe that our culture is one of the reasons our company continues to thrive A place where you're valued, challenged, and inspired! Job Description Reporting to the Senior Solutions Development Manager, you will workwithin the Business Development function, responsible for leading the solution design of tender responses, designing and delivering commercially competitive solutions for warehouse opportunities. This role can be based at any of our Great Bear depots within the Midlands or North area however some travel will be a requirement as part of the role. Working hours: Monday to Friday, 40 hour week. Key Duties of a Solutions Development Manager: • Communicate directly with customers during all stages of the tender process., • Analyse customer requirements including tender documents and data. Assess business development opportunities in the context of Great Bears existing operations and provide executive summaries. Make recommendations regarding the suitability of potential new business., • Plan and coordinate project and tender responses. Make recommendations regarding bid scope. Liaise with Regional Operations Directors, operations teams and specialist functions within the business throughout all phases of the tender process., • Design warehouse and transport solutions taking into account industry best practice, including: Warehouse processes; layouts; equipment; vehicle routing and shift planning, IT systems; management and admin structures., • Develop and execute appropriate models to determine resources (people, equipment, property, IT, transport etc.) to feed into financial models., • Manage quotes for sub-contracting any non-core services which form part of tender scope., • Prepare profit and loss budgets in conjunction with finance teams., • Provide detailed financial and operational comparisons for alternative solutions highlighting risk., • Prepare tender response documentation and presentations., • Assist with the development of company marketing materials., • Maintain an up to date knowledge of developments in the industry through membership of a professional body (e.g. CILT), attending industry events and training courses., • Support the development of other members of the business development team., • Successful track record working in a logistics solutions design role with commercial accountability. Operational experience advantageous., • Ability to lead a team through the tender process and produce high quality results. Leverage support from other departments e.g. IT, operations, HR, facilities management, to ensure appropriate engagement in solutions design and the tender process., • Technically proficient using advanced Microsoft Office Excel functionality (macros; pivot tables; data links; lookups; etc.) with the ability to deal with complex data management., • Current and in depth understanding of commercial warehouse rates and profit & loss., • Confident communicating with Senior Management, Key Stakeholders and customers up to and including Board Level., • Capable of working under pressure to meet critical deadlines and complete objectives., • Experience of automation technologies currently in the market. Our dedicated learning and development programmes are open to every employee to give you the opportunity to shape your own future within logistics and continue to work in an environment where team culture thrives. Our People are the driving force behind our success, which is why we offer a wide range of benefits which include: • Annual Leave Competitive holiday entitlement of 25 days plus the bank holidays., • CompanyBonus We do our best work to succeed together. When we achieve our goals you'll be rewarded through our bonus scheme., • Private Medical Cover This gives you peace of mind, you have choice, flexibility and speed of access to the most clinically appropriate care via Bupa., • Pension scheme we want colleagues to enjoy a comfortable retirementso we offer agreat contribution of 5% employee and 8% employer., • Life Assurance- 4x your annual salary., • Company car or car allowance - business need, • Wellness Via our Employee Assistance Programme,we offer immediate access to a confidential telephone counselling and legal information service that operates 24 hours a days, 365 days a year., • Eye Care Vouchers We can provide you with substantial savings with free eye tests and discounts on prescription glasses., • Reward & Recognition We recognise that employees have gone the extra mile via Employee of the month and year, special recognition and long service awards.

Optimistic - Equity- Kindness- Innovation Collaboration Take the next step in your career now, scroll down to read the full role description and make your application. Kindly note that we do not accept CVs, in line with Keeping Children Safe in Education requirements. All applications must be submitted via the link provided only. Derby College Group (DCG) have a brilliant opportunity for an Estates Officer to join our passionate Estates team.In this role you will aid the relevant estates managers in their day-to-day duties in managing the estate and all related contracts. The Opportunity This role offers an excellent opportunity to contribute to the smooth running and ongoing improvement of a dynamic, multi-site college estate. You will gain valuable experience in facilities management, supporting the maintenance of high building standards while ensuring safety and compliance across all sites. Working closely with the Estates team, you will develop a broad skillset by coordinating maintenance activities, supporting fire safety compliance, and assisting with the management of the vehicle fleet. This is a varied and hands-on role, ideal for someone looking to build a career in estates, facilities, or operations within a supportive and purpose-driven environment. About you You are a reliable, organised, and adaptable individual with a strong attention to detail and a proactive approach to their work. You will be confident working across multiple sites, building positive relationships with contractors and colleagues, and supporting a collaborative team environment. You will bring sound knowledge of Estates and Facilities practices, ideally within a commercial or educational setting, alongside an understanding of safeguarding requirements and current health and safety legislation. Experience in estates, maintenance, building compliance, or a similar operational role is essential, with knowledge of fire safety and compliance being desirableor a willingness to undertake relevant training. A minimum of Level 2 English and Maths is required, along with a full clean UK driving licence, and either a relevant estate or building qualification or equivalent hands-on experience. xrnqpay The Benefits • 34 days holiday (inclusive of 8 bank holidays and 6 closure days where these occur), • Membership of the Local Government Pension Scheme with a 19.9% employer contribution, • Free onsite parking, • Discount at our Ofsted rated Outstanding onsite Little Explorers Nursery, • TOTUM discount card (aka NUS/Student Discount Card) / discounted Tastecard, • Discounts on East Midlands Railway Annual Season Tickets, • Microsoft Office for FREE with 1TB of OneDrive cloud storage, • Discount on treatments at SENSI our onsite salon at the Roundhouse, • Flint Bishop Solicitors free will writing, 1-hour free consultation with family department, 10% discount on Conveyancing services, • Continuous development and progression opportunitiesFor a full explanation of the roles and responsibilities and the person specification, please click on the Apply link below.

An established, first-opinion small animal practice in the Southeast is seeking an experienced Veterinary Surgeon to join their stable, supportive team. This is a replacement role within a well-run practice with low staff turnover, strong clinical standards and a genuine focus on work–life balance. The team is not rushed to hire and is happy to wait for the right person. Salary - £60,000 - £70,000 The exact salary within this banding will be awarded commensurate on experience. Location Interested in this role You can find all the relevant information in the description below. Salfords, Surrey Established first-opinion small animal practice, opened in 2018 and extended in 2021. The practice is operating at capacity with a loyal, established client base and high standards of care. The Role • 4-day working week, • 10-hour days with a paid 30-minute lunch, • Vets finish at 6:30pm; phones off after 6pm, • Opportunity to leave early if work is completed, • 1 in 3 Saturdays (8am–4pm), • TOIL for each Saturday worked, • Mix of consulting and operating, • 15-minute consults as standard, • Longer consults for complex cases, new clients and euthanasia, • Blocked end-of-day admin time, • Currently supported via a sister hospital, • Experienced, self-sufficient GP veterinary surgeon, • Confident managing their own caseload, • Comfortable with routine soft tissue surgery and dentals, • Able to “hit the ground running” without placing pressure on the team, • Happy to support and potentially train new graduates in the future Practice Overview • First-opinion small animal practice, • Stable team with low staff turnover, • Strong leadership with an organised, structured and supportive management style, • Ultrasound, • Dental X-ray (separate prep room), • Laser, • Diathermy, • Suction, • Video equipment, • Separate theatre and prep areas Culture and Development • Open-door, supportive culture, • Daily case discussion encouraged, • Strong mentoring environment, • Emphasis on finishing on time and maintaining balance, • Collaborative team that covers for one another Benefits • Salary: £45,000 – £70,000 DOE, • 4-day working week, • 5 weeks holiday, increasing with service, • Option to buy an additional week of leave, • January / February annual leave incentive, • £1,500 CPD allowance plus paid CPD leave, • Certificate support available, • RCVS fees plus one additional membership paid, • Staff discounts on treatments, food and products For further details on this exceptional role, please click the Apply Now button. If you can specify the best time to talk, please do; we will get in touch when it suits you best. You will then be contacted by one of our specialist consultants, who will provide you with further details about the role. If you would like to talk ahead of sending us your CV, please give us a call on Please note, any contact is in the strictest confidence and we will not send your details to any practice without your expressed consent to do so. Is this role almost right for you, but not quite ticking all the boxes? If so, we have many other roles available and also offer a Bespoke Job Search Service where we work proactively to find you your perfect job. We have been named as the Recruitment Firm of the year at the HealthInvestor Awards, Winners of the Professional Service Provider of the Year at the General Practice Awards, Winners of the Recruitment Award at the LaingBuisson Awards and named on the Recruiter Hot100 list, so in dealing with us you'll be in safe hands! For every placement we make, Menlo Park plants two trees! We plant one on your behalf and the other on the surgery's behalf. xrnqpay By planting two trees we offset 0.6 tonnes of CO2, the equivalent of driving 1,466 miles in a standard car. We want to contribute towards helping save the planet! Josh Deacon

Job Specification: For: Service Engineer Salary: £60,000-£70,000 • Additional uplift when working away, • Working weekends when traveling is double time, • Company Pension Scheme Department: Service Department Location: Chesterfield based, with travel (UK & Overseas) Permanent Position Shifts: Chesterfield Workshop (Mon-Thurs 7.00am till 14.00pm & Fri 7.00 am till 11.00am) Traveling hours (Flexible) Generations are excited to be recruiting a Service engineer to join an innovative and industry-leading company with specialist expertise and experience in the design, manufacture, and installation of environmental machinery. Purpose of Role: • To represent the Company in a positive manner, it is a proactive point of contact for customers and strive to develop and nurture client relationships., • Work with customers at their premises, representing the Company, leading internal and external teams through the Servicing, maintaining and repairing our products., • Be a technical reference point for all Products, feedback to our engineering teams and drive evolution., • Help to drive a positive health and safety culture in every aspect of your role., • You will be part of the Projects and Services Teams involved in the breakdowns and servicing of equipment and systems supplied to our global customers., • You will be required to travel at short notice, • The position is a mixed office/shop/site role with regular overseas travel to perform service visits at customer facilities to troubleshoot and resolve electrical, mechanical, and software issues, and/or to handle scheduled maintenance tasks., • Servicing, maintaining and repairing of electrical and mechanical equipment aimed at improving reliability and efficiency., • Coordinate with the customer or third-party contractor to accomplish tasks., • Provide training and useful information to customer representatives, operators, engineers, and management., • Prepare all documentation related to on-site activities including site visit reports, marked up as built drawings, time sheets, and commissioning documents., • Provide technical support to customers to resolve plant breakdown or reliability issues., • Document any issues or product improvement ideas and present this information to the team., • Occasionally remotely supporting customers will be required out of hours, this is due to the global time zones., • Assist with the assembly and factory acceptance testing of products at our facility in the UK, • This role requires frequent and sometimes short notice travel to many parts of the world. It is expected that this could be up to 30-40% of your working time., • Responsible for planning and booking your own travel to the destination required., • When not traveling to customer site the Testing role below will be carried out in our Chesterfield workshop., • Any reasonable work request to support the business needs. Have you got what it takes to succeed The following information should be read carefully by all candidates. Testing Responsibilities & Duties: • Setting up PLCs, HMIs to the required standard, • Testing electrical control units to ensure compliance with the required outputs, • Fault finding in the event of non-compliance of electrical controls and performing root cause analysis investigations to understand the failure mode, • Implementation of corrective and preventative actions to return the controls to required standard and outputs., • Maintaining, supporting and upgrading hardware & software in line with business requirements, • Ensuring all work is completed in line with the business safe operating procedures providing no risk to H&S, • Complete all required electrical controls in line with production schedule, ensuring on time in full, • All work completed to the Quality standard requirements ensuring fully compliant work including but not limited to current safety regulations and external and internal quality standards, • Fully responsible for taking ownership for area of work, maintaining a safe as practically possible working environment ensuring good housekeeping, safe working practices and general workplace maintenance Environment, Health & Safety: In addition to the role Responsibilities, every employee has overall responsibility for: • Taking reasonable care for your own Health and Safety and the Health and Safety of others who may be affected by your actions., • Working with the Company to ensure a high standard of Environmental Health and Safety management by following the site EHS procedures. Ensuring compliance with all relevant quality standards/procedures in your area. This includes reporting any deviations from these standards/procedures, completing corrective actions and making recommendations to prevent similar deviations in the future., • Maintains safe and clean working environment by enforcing procedures, rules, and regulations., • Maintains product and company reputation by complying with applicable regulations. Qualifications & Experience: • Time served (Engineering discipline Electrically biased), • Min. xrnqpay 2 years electrical installation / service experience (mechanical experience would also be an advantage), • ECS / CSCS Card (preferred), • Min 5 GCSEs Grade C and above, • Experience in Plant / Cast House / heavy manufacturing Environments, • Computer literacy with MS Office, Outlook and Adobe software., • Competent in reading both Electrical and Mechanical drawings essential, • Hydraulic experience (preferred), • Basic knowledge of PLCs, HMIs, companys electrical hardware and software, • Ability to identify non-compliance, • Comfortable and a basic understanding of computers/ computerized systems

Type: Permanent - Full TimeSalary: £32,570 - £38,175 per annumClosing Date: Sunday, 19th April 2026We have an exciting opportunity for a Lecturer in Agriculture to join our team at Loughborough College Group, based at Brooksby College. In this role, you will use your expertise to inspire the next generation of agricultural professionals—helping students understand not just how things are done, but the vital why behind modern agricultural practice. As an Agriculture Lecturer, you will deliver teaching across our land-based provision, utilising a wide breadth of agriculture knowledge and experience. Your teaching will directly contribute to shaping the future of a dynamic and rapidly evolving industry. Responsibilities of this role include; Planning, delivering, and assessing engaging lessons across crops, plant and soil and estate skills. Supporting and guiding students through practical and classroom-based learning Developing course materials and contributing to the ongoing improvement of the Land based curriculum. Assessing and reviewing students progression in the workplace. Ensuring high standards of health, safety, and welfare across all teaching and practical activity areas. What we are looking for; Strong, up-to-date industry experience in agriculture—ideally with knowledge of crops, machinery, estate maintenance, or general farm operations. A passion for teaching and inspiring the next generation, with the ability to explain both theory and practical application clearly. Excellent communication and organisational skills, with confidence delivering to learners of varying abilities. A recognised teaching qualification (DTLLS, PGCE, or equivalent) or a willingness to work towards one. It is essential candidates have a full driving licence and the access to a vehicle to use when visiting students in the workplace. Whether you’re currently working within the agricultural sector and seeking your first teaching opportunity, or already have experience in education, we are looking for someone with a genuine passion for innovation—bringing fresh ideas and emerging technologies into the learning environment. With an extensive 850-acre estate, including a mixed-use livestock and arable farm, Brooksby College offers an exceptional practical setting. Our students benefit from a rich blend of classroom learning, demonstrations, and hands-on experience, giving them a strong foundation for successful careers within the industry. As part of our dedicated land-based team, you will contribute to the planning, delivery, and ongoing development of our courses. You will bring excellent subject knowledge, strong industry insight, and the ability to apply a range of engaging, effective teaching methods. Loughborough College Group is formed of Brooksby College, Loughborough College, Stephenson College and IGNITE Performing Arts. We have a vast curriculum across campuses offering challenging and engaging learning experiences for our students. We are and have consistently invested in providing our learners and employees with an outstanding and unrivalled range of modern facilities and resources. Loughborough College Group is striving to attract, develop and retain the very best people by offering a motivating and inclusive workplace in which talent is truly recognised. We are committed to promoting a diverse and inclusive community with the belief that diversity plays an important role in the success of the college. We are proud to have achieved the Investor in Diversity award and we actively encourage applications from individuals who are currently under-represented and from all areas of the community. Alongside this, we are a disability confident employer, and we welcome everyone to consider becoming a part of our journey. As well as our commitment to your professional and personal development, we also offer a generous benefits package including: A competitive pension scheme Cycle-to-work scheme On-site parking Access to healthcare scheme Subsided nursery fees Up to 44 days annual leave per year Additional annual leave available Generous Maternity/Paternity pay Fantastic CPD and inclusive resources for development Well-being hours Opportunities of volunteering within local community and charities We offer a range of family friendly, inclusive employment policies, flexible working arrangements and agile working where the business allows. We provide staff forums, staff working groups for sustainability, staff steering groups for Investors in Diversity and support services to support with mental health and wellbeing for staff from different backgrounds. Kindly be advised that we are unable to provide skilled worker sponsorship for this position. Applicants must have the right to work in the country without the need for sponsorship. Loughborough College Group is committed to safeguarding and promoting the welfare of all students and expects all staff to share this commitment. Please note, all applicants will be subject to an enhanced DBS check. If you require any support to apply for this job, please email

Type: Permanent - Full TimeSalary: £26,340 Per AnnumClosing Date: Sunday, 19th April 2026We have an exciting opportunity for an Instructor Technician in Agriculture and Countryside Management to join our team at Loughborough College Group, based at Brooksby College. In this role, you will use your expertise to inspire the next generation of agricultural professionals—helping students understand not just how things are done, but the vital why behind modern agricultural practice. Your support will directly contribute to shaping the future of a dynamic and rapidly evolving industry. As an Instructor, you will support teaching across our land-based provision, utilising a wide breadth of agriculture knowledge and experience. Whether you’re currently working within the agricultural sector and seeking your first teaching opportunity, or already have experience in education, we are looking for someone with a genuine passion for innovation—bringing fresh ideas and emerging technologies into the learning environment. Responsibilities of this role include; Supporting, delivering, and assessing engaging practical sessions across Agriculture and Countryside Management Supporting and guiding students through practical learning and contributing to the ongoing improvement of the Land based curriculum. Ensuring high standards of health, safety, and welfare across all teaching and practical activity areas. Working as a technician on the college farm and estate to provide support and expertise whilst maintaining the college environment. What we are looking for; Strong, up-to-date industry experience in agriculture and countryside management. A passion for inspiring the next generation, with the ability to explain practical application clearly. Excellent communication and organisational skills, with confidence delivering to learners of varying abilities. A recognised teaching qualification (DTLLS, PGCE, or equivalent) or a willingness to work towards one. With an extensive 850-acre estate, including a mixed-use livestock and arable farm, Brooksby College offers an exceptional practical setting. Our students benefit from a rich blend of classroom learning, demonstrations, and hands-on experience, giving them a strong foundation for successful careers within the industry. As part of our dedicated land-based team, you will contribute to the planning, delivery, and ongoing development of our courses. You will bring excellent subject knowledge, strong industry insight, and the ability to apply a range of engaging, effective teaching methods. Loughborough College Group is formed of Brooksby College, Loughborough College, Stephenson College and IGNITE Performing Arts. We have a vast curriculum across campus’s offering challenging and engaging learning experiences for our students. We are and have consistently invested in providing our learners and employees with an outstanding and unrivalled range of modern facilities and resources. Loughborough College Group is striving to attract, develop and retain the very best people by offering a motivating and inclusive workplace in which talent is truly recognised. We are committed to promoting a diverse and inclusive community with the belief that diversity plays an important role in the success of the college. We are proud to have achieved the Investor in Diversity award and we actively encourage applications from individuals who are currently under-represented and from all areas of the community. Alongside this, we are a disability confident employer, and we welcome everyone to consider becoming a part of our journey. As well as our commitment to your professional and personal development, we also offer a generous benefits package including: Cycle-to-work scheme On-site parking Access to healthcare scheme Subsided nursery fees Up to 25 days annual leave per year Additional annual leave available Generous Maternity/Paternity pay Fantastic CPD and inclusive resources for development Well-being hours Opportunities of volunteering within local community and charities We offer a range of family friendly, inclusive employment policies, flexible working arrangements and agile working where the business allows. We provide staff forums, staff working groups for sustainability, staff steering groups for Investors in Diversity and support services to support with mental health and wellbeing for staff from different backgrounds. The successful candidate will be employed by The Leicestershire College a subsidiary company of Loughborough College. The terms and conditions of employment offered by the Leicestershire College are different to those of Loughborough College. Please note that employees of the Leicestershire College are based at one of the campus’ of Loughborough College Group. Kindly be advised that we are unable to provide skilled worker sponsorship for this position. Applicants must have the right to work in the country without the need for sponsorship. Loughborough College Group is committed to safeguarding and promoting the welfare of all students and expects all staff to share this commitment. Please note, all applicants will be subject to an enhanced DBS check. If you require any support to apply for this job, please email

Apprentice Chef Check below to see if you have what is needed for this opportunity, and if so, make an application asap. The Army - United Kingdom From £26,334 a year Catering with impact. As a full-time soldier, entry-level Chef in the British Army, youll: • Provide everything from fine dining and state banquets to humanitarian aid and disaster relief, • Be part of a highly respected, specialist team, • Give soldiers the energy and morale they need to complete any mission, • Achieve the highest culinary standards in the most challenging environments Set yourself up for life. During your initial training, youll earn £26,334. If you set your mind to it, you could reach Corporal within 5 years, earning £37,861. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training with us, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the entry-level training you need. Youll even get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. xrnqpay You Belong Here. Apply Now.

Apply today to work as an HGV Class 1 Driver for our client who has one of the biggest names within the HGV industry. With the latest vehicles on the market, this gives you the best HGV experience and a top-range vehicle to work with! Staffline is recruiting HGV Class 1 Drivers in Markham Vale. Consolidated Pay Rates (Paid Weekly) The rate of pay is £14.99 - £19.99 per hour. This role offers 5 out of 7 and 4 on 4 off, AM and PM shifts. Your Time at Work As an HGV Class 1 Driver you will be responsible for: • Conducting pre-trip and post-trip vehicle inspections, reporting any defects or maintenance needs to ensure roadworthiness - Maintaining accurate records of deliveries, logbooks, and other necessary paperwork in compliance with company policies and legal requirements. - Following all safety protocols and procedures, including the use of personal protective equipment (PPE) and adherence to health and safety regulations. Our Perfect Worker Our perfect worker will have excellent communication skills and be able to understand and carry out necessary vehicle checks to ensure vehicle safety and able to report defects correctly. Applicants will comply with on-site health and safety requirements. You will understand and be able to comply with driver's hours and WTD legislation You should hold a valid HGV 1/C+E Licence, DCPC & Tacho cards and have a minimum of 6 months HGV Class 1 driving experience with no more than 6 points no DD/ DR Code convictions. Key Information and Benefits • Earn £14.99 - £19.99 per hour - 24/7 on-site support - Career progression opportunities - Modern Facilities - Great Rates Of Pay Job Ref: D1GBMV About Staffline Staffline is the UK's leading provider of flexible, temporary and permanent workforce solutions, enabling over 28,000 people into good work every day. We operate at more than 350 customer sites across England, Scotland and Wales. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline. TPBN1_UKTJ

A leading facilities management company in the UK is seeking a Cleaner for part-time work. Ideal candidates should be reliable, hardworking, and able to work as part of a team.

A healthcare services provider in the UK is seeking a Patient Caterer to deliver high standards of food and drink service within a hospital setting.The role involves ensuring kitchen areas are clean and serving meals efficiently to patients.Working hours are 15:00 to 19:00, 4 days a week, with possi

A modern dental practice in Chesterfield is seeking an Associate Dentist to provide NHS and private treatments. This role offers a supportive team environment and opportunities for professional development, along with a fully equipped practice featuring modern facilities.

Apply today to work as an HGV Class 1 Driver for our client who has one of the biggest names within the HGV industry. With the latest vehicles on the market, this gives you the best HGV experience and a top-range vehicle to work with! Staffline is recruiting HGV Class 1 Drivers to work in Wakefield - Yorkshire. Consolidated Pay Rates (Paid Weekly) The rate of pay is £18.24 to £23.71 per hour. This role offers various shifts with the start times between 00:00 - 23:59. Your Time at Work As an HGV Class 1 Driver you will be responsible for: • Conducting pre-trip and post-trip vehicle inspections, reporting any defects or maintenance needs to ensure roadworthiness - Maintaining accurate records of deliveries, logbooks, and other necessary paperwork in compliance with company policies and legal requirements. - Following all safety protocols and procedures, including the use of personal protective equipment (PPE) and adherence to health and safety regulations. Our Perfect Worker Applicants will comply with on-site health and safety requirements. You will understand and be able to comply with the driver's hours and WTD legislation You should hold a valid HGV 1/C+E Licence, DCPC & Tacho cards and have a minimum of 6 months HGV Class 1 driving experience with no more than 6 points no DD/ DR Code convictions. Key Information and Benefits - Earn £18.24 to £23.71 per hour - Various shifts - 24/7 on-site support - Career progression opportunities - Modern Facilities - Great Rates Of Pay Job Ref: D1ESLWA About Staffline Staffline is the UK's leading provider of flexible, temporary and permanent workforce solutions, enabling over 28,000 people into good work every day. We operate at more than 350 customer sites across England, Scotland and Wales. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline. TPBN1_UKTJ

Mobile Installation Engineer £33,000 per annum Mon–Fri | Field-Based | Permanent We’re looking for a hands-on Installation Engineer to join a well-established security company. This is a field-based role working across the Midlands and Yorkshire, installing a range of security products. You’ll be trusted to manage your own work once trained, with support always available. The Package £33,000 salary Paid overtime (higher rate at weekends) Company van, tools and uniform Christmas bonus Increasing holidays with service Free parking and onsite facilities Regular company events The Role Install security systems Work on sites across the Midlands & Yorkshire Work independently once trained Deal with customers on-site Overnight stays are rare (1–2 times per year). Overtime is paid for any extra hours worked. What We’re Looking For Experience in installation, engineering or similar Valid UK Drivers license Strong practical skills Able to work alone and manage your own workload Good attitude and reliable Complete work to a high standard

Mobile Service Engineer – Rotary & Mechanical Equipment Location: Chesterfield / Nationwide Travel Salary: £35,000 – £37,000 + Overtime A well-established Chesterfield-based organisation is looking to expand its team of Mobile Service Engineers. This is a varied, hands-on role involving regular travel across the UK and working with rotary and mechanical equipment. Full training is provided, along with genuine opportunities for long-term career development within a growing and supportive business. The Role As a Mobile Service Engineer, you will: Service, maintain, and repair rotary and mechanical machinery at customer sites Travel nationwide, with occasional periods working away from home Diagnose faults and carry out mechanical repairs efficiently Work to high safety, quality, and performance standards Represent the company professionally on client sites What We’re Looking For Experience or working knowledge of mechanical machinery (rotary equipment experience highly desirable) Background in engineering, maintenance, or machine handling Full UK driving licence Flexibility to work away from home for extended periods Willingness to work weekends, bank holidays, and nights when required Reliable, committed team player with a positive attitude Functional literacy skills for reports and documentation What’s on Offer Salary: £35,000 – £37,000, plus overtime Enhanced overtime rates for weekends and additional hours Accommodation paid when working away, including evening meals Company van provided Company pension scheme ‘On call’ arrangement to ensure ongoing work between projects Full training and professional development Modern, state-of-the-art head office facilities Supportive and friendly management team Important: Working hours will vary depending on project demands, so flexibility is essential. This role is ideal for engineers who enjoy travel, hands-on mechanical work, and earning additional income through overtime. For more information, call (phone number removed) to discuss the role in more detail

Mechanical Engineer / Operator-Fitter (Rail Grinding Machines) Location: UK Mobile (Nationwide Travel) Package Overview Starting Salary (Level 1): £43,000 Annual Bonus: 7.5% paid twice yearly (15% total) = £6,450 per year Salary rises after probation and rail safety competencies are passed. Following the rail grinding train around the UK as a service engineer/fitter Working away from home for 3 weeks with 1 rest week every 3 weeks. Shift pattern is 6 days on 1 day off for 3 weeks, then 7 days off. Clear salary and bonus progression annually Job Overview: We are recruiting for experienced Mechanical Engineers / Fitters to join a specialist rail grinding fleet operating nationwide. Working within a close-knit team of approximately 12 engineers per train, you will maintain, fault-find and operate heavy rail-mounted grinding trains that restore rail profiles and ensure the safety and performance of the UK rail network. This is a physically demanding, hands-on role involving mechanical overhauls, hydraulic systems maintenance and night working when trained in the future to operate the grinder train. The role requires extended travel, with 3 weeks per month working away from home. This position would suit candidates from heavy plant, rail, mining, marine, military or other heavy industrial maintenance backgrounds. Key Responsibilities Maintain and operate rail grinding machines in line with operational plans and rail safety standards Carry out preventative and reactive maintenance on mechanical, hydraulic and pneumatic systems Strip down, inspect and rebuild grinding heads, motors, gearboxes and drive assemblies Change and set grinding stones, monitoring grinding output and machine performance Diagnose and repair hydraulic faults (pumps, cylinders, hoses, valves) Complete daily inspections, underframe cleaning and component servicing Fault-find mechanical and basic electrical control systems Work safely within rail possessions during night and weekend shifts Accurately complete maintenance documentation and defect reports Maintenance and Operation: Maintain, fault-find and repair rail grinding machines and on-track plant Carry out preventative and reactive maintenance on hydraulic, pneumatic and mechanical systems Inspect and maintain pumps, motors, gearboxes, hoses, cylinders and valves Diagnose hydraulic pressure faults and mechanical wear issues Strip down, rebuild and replace worn components Undertake daily safety inspections and underframe cleaning Use hand tools, torque equipment and diagnostic test gear Complete maintenance records and work in line with rail safety standards Safety & Compliance: Ensure compliance with health, safety, and environmental safeguards. Complete daily work return forms and maintain machine safety packs and operational records. Serve as 2nd man/fire watch during grinding operations. Carry out Controller of Site Safety (COSS) duties if required. Person Specification: Qualifications & Experience: MUST HAVE: NVQ Level 3 in Mechanical Engineering or a formal apprenticeship in Mechanical/Electrical Engineering. Previous experience in heavy industrial maintenance, such as agriculture, aggregates, rolling stock, offshore, or plant fitting. Hydraulics and pneumatics experience is highly desirable. Must hold a full driving licence, NO MORE THAN 3 POINTS Must pass a full rail medical and drug and alcohol screening test Must pass a criminal record background check (DBS) Work Schedule: Shift Patterns: 6 days on, 1 day off while away, when working a 4-night shift pattern, you will be given 2 days off. You will be working 280 hours over 8 weeks. You will be provided with a detailed monthly rota, but flexibility is essential. Travel: Extensive travel across the UK. Full Hotel lodging will be provided at Holiday Inn hotels or Premier Inns, with your own room and breakfast included. £45 per night paid when working away as your allowance, which is £7,500 per year and paid into your salary each month Holiday & Time Off: 34 days annual leave (including bank holidays). 1 rest week off every 3 weeks (13 weeks per year) Additional Benefits: The use of a company van and fuel card when needed. Life assurance and health care cash plan. Pension scheme. Employee Assistance Programme for well-being. Eye care vouchers. Long service awards and seasonal ticket loan options. Training & Progression: Full training will be provided, including manual handling, machine setup, and pack-away for operation. Progression opportunities include advancing from Level 1 to Level 3, with the chance to increase salary significantly within two years. Opportunities for further progression include training to become a train driver, which requires a psychometric test. Work Environment: You will work in a close-knit team of engineers, building long-lasting relationships. The work involves being on board rail grinding machines, working in dirty and dusty conditions. You will have access to "a comfort carriage" on the trains, providing facilities such as a small breakout area, kitchen, toilets, and a manager’s office. We prioritise your safety, providing full protective gear, including air-supplied masks and safety boots. To apply for this role, please send your CV through the link, and we will call you back ASAP for a chat about your situation and also your availability to attend an interview. #ENG1

PA to Regional MD/Office Manager - North Midlands We are looking for a highly organised, proactive, and professional Personal Assistant/Office Manager to support our Regional Managing Director and leadership team at our North Midlands Regional Office. This is a varied and fast-paced role where no two days are the same. You will be the central hub of the regional office ensuring the Managing Director’s time is effectively managed, key meetings run smoothly, and the office operates efficiently. If you thrive on organisation, enjoy problem solving, and take pride in keeping things running seamlessly behind the scenes, this role offers a fantastic opportunity to make a real impact. The role: As Personal Assistant to the Managing Director, you will provide high-level administrative and organisational support, ensuring the MD’s time, priorities, and communications are managed efficiently. Alongside this, you will take on the role of Office Manager, overseeing the day-to-day running of the office, coordinating facilities management, supporting the regional team, and ensuring operational processes run smoothly. You will develop a strong understanding of the business and build relationships with colleagues across the organisation, becoming a trusted point of contact for both internal and external stakeholders. Key responsibilities - PA duties - • Manage and prioritise the Managing Director’s diary, workload and meeting schedule, • Handle incoming calls for the MD, ensuring clear messages and effective follow-up, • Organise internal and external meetings, including regional site visits, • Coordinate Board meetings, including preparing board packs and documentation, attending meetings, taking minutes and distributing actions, organising venues and catering, • Coordinate follow-up information requests from the Group Managing Director, • Manage Data Subject Access Requests (DSAR) in line with GDPR, • Handle customer complaints escalated to the MD, working with Customer Services to gather information and prepare responses, • Support the implementation of Health & Safety policies in collaboration with the Group SHE Advisor, • Organise company social events when required Office Manager duties - • Line manage the Office Receptionist, • Oversee building and facilities management, including waste management and pest control, • Coordinate fire and safety compliance, including servicing of fire equipment and alarm testing, • Order IT equipment and prepare induction documentation for new starters, • Manage the regional fleet vehicles, including collections, returns, valeting, repairs and insurance claims, • Provide IT coordination, requesting equipment and managing replacements while maintaining accurate records for new starters and leavers, • Support budget management and monitor office expenditure, • About you -, • We are looking for someone who is organised, proactive, and comfortable managing multiple responsibilities in a busy environment. You will have - • Experience in a similar PA, Executive Assistant, or Office Manager role, • Excellent written and verbal communication skills, • Strong organisation and time management abilities, • Exceptional attention to detail and accuracy, • The ability to prioritise and multitask in a fast-paced environment, • Confidence working independently and using your own initiative, • Strong discretion and understanding of confidentiality, • Proficiency in Microsoft Office 365 (desirable). We believe Harron Homes is a place for everyone, no matter where you come from, what you look like or how you identify. Please note due to the volume of applicants, if you have not heard from us within 14 days, please accept this as confirmation that we will not be progressing with your application further on this occasion

Manufacturing Engineer Derbyshire £45,000 –50,000 2pm finish Friday, 4% matched company pension, DIS x2, Medicash healthcare, paid sick leave, 25 days holiday + stats The Company We are supporting an innovative and developing precision engineering organisation, specialising in the machining of large and complex performance-critical components to the aerospace and defence industry. This business has seen over 50% growth over the last 3 years, targeting £14 million turnover in 2025. They continue to expand their capabilities, with a multi-million-pound investment in a new facility, with aims to increase their direct hours by 15% within the next year. With advanced capabilities in both machining and high-integrity fabrications, their state-of-the-art facilities enable them to handle projects of various sizes, up to 9mm diameter, with exceptional precision within a highly regulated, low-volume environment To strengthen their manufacturing capabilities as they continue to grow, they’re now looking for an experienced Manufacturing Engineer to join their highly skilled and dedicated team. The Role The role of the Manufacturing Engineer will be to define, develop and maintain methods of manufacture for precision-machined components. The successful Manufacturing Engineer will be given responsibility for full projects OR specific areas within a project, and work collaboratively alongside fellow Manufacturing Engineers, Production and Quality Engineers to improve the clarity and robustness of the manufacturing processes, as well as reduce any ambiguity between each department. Day to day responsibilities will include; Develop CNC machining strategies, tooling, and fixturing Produce manufacturing routings, operation sheets, and stage documentation Specify materials, subcontract processes (heat treatment, NDT, coatings), and inspection requirements Support non-conformance investigations and assist with corrective and preventive actions Ensure compliance with ISO 9001, AS9100 Utilising the ERP system for route cards to standardise processes across manufacturing Creating CNC programmes Creating own jigs & fixtures – from initial definition, creating route cards to transferring programmes to machinery The Candidate To be successful in your application for this Manufacturing Engineer role you will need: Experience working as a Manufacturing Engineer within a precision manufacturing/highly regulated environment including Defence, Aerospace, Nuclear or Gas Turbines Well versed in reading engineering drawings CAD/CAM system experience This role would ideally suit someone who has worked up from the shopfloor, ideally a Skilled Machinist with an interest in problem solving and leading changes in manufacturing processes Due to the nature of the business, must pass eligibility criteria to work in the UK and on a highly classified site Proactive, self-motivated and able to work under own steam Previous experience of making own jigs/fixtures would be highly advantageous The Benefits In return, our client are offering the successful Manufacturing Engineer; £45,000 – 50,000 (potentially flexible for the right candidate) 4% matched company pension 2pm finish Friday DIS x2 Company sick pay (after 1 years service) Medicash healthcare 25 days holiday + stats ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Electrical Operations Manager Location: East Midlands Type: Permanent - Full-Time Pay: Negotiable (DOE) + Car/Allowance + Benefits A growing and well-established electrical compliance contractor is seeking an experienced Electrical Operations Manager to lead its Electrical Operations division. This is an excellent opportunity for a technically strong leader to join a successful business delivering electrical compliance and service contracts across the commercial sector. Roles & Responsibilities • Managing a team of 20+ office and field-based staff, • Overseeing commercial electrical compliance contracts across various sites, • Coordinating labour planning, materials and operational resources, • Conducting site visits to monitor progress and contract performance, • Working closely with senior management and estimating teams to maintain budgets, • Supporting engineers with technical guidance and problem solving, • Attending client meetings and maintaining strong customer relationships, • Ensuring all work meets required quality and compliance standards, • Supporting NICEIC compliance as a Qualified Supervisor, • Driving operational improvements and efficiencies Contracts typically cover a range of sites including schools, offices, industrial facilities, warehouses, public buildings and healthcare environments. Requirements • Proven experience working as an electrician in maintenance, installation, or service environments, • Ability to work independently and as part of a wider team - Strong fault-finding and problem-solving skills - Excellent communication and customer-facing skills - Good organisational and time-management abilities Qualifications (Essential): • Minimum 3 years' experience as an Electrical Contracts or Operations Manager, • NVQ Level 3 in Electrical Installation (or equivalent), • 18th Edition Wiring Regulations (C&G 2382), • Inspection & Testing (C&G 2391 or equivalent), • Strong understanding of BS7671 and electrical compliance regulations, • NICEIC Qualified Supervisor status, • Experience managing commercial electrical contracts, • Excellent communication and organisational skills, • Ability to manage multiple projects simultaneously Desirable Experience • Health & Safety qualifications (IOSH, SSSTS or SMSTS), • Experience delivering both small and large-scale electrical projects What We Offer • Competitive, • Company car or car allowance, • Fuel card, • Company pension, • Increasing holiday allowance with service, • Career progression opportunities, • Annual salary reviews Next Steps Apply to this Electrical Operations Manager role through this advert. If you would like more information about this role, please contact Kevin McGann in our Construction team on (phone number removed). If successful, you will need to digitally register with our agency (if you haven't already done so). If you have not been contacted regarding your application within 7 days, please assume that you have not been successful. We will, however, retain your application for any future roles for which you may be suitable. About Regional Recruitment This position is being advertised by Regional Recruitment Ltd, an award-winning independent recruitment agency established in 2008. We specialise in permanent, temporary, and contract opportunities across the Commercial, Construction, Industrial, Technology, and Engineering sectors. To explore more roles available across the UK, please visit (url removed) or get in touch with us directly: Telephone: (phone number removed) Email: (url removed)

Mechanical Maintenance Engineer Location: Derbyshire Salary: £53,482 (including shift premium) Shift Pattern: 3 Shift Rotation Hours: 40 hours per week We are working with a well-established international manufacturing business that operates multiple production facilities across the UK and globally. The company produces specialist high-performance products used across a range of commercial and public environments and is known for its focus on quality, innovation and continuous improvement. Due to continued investment and development at their Derbyshire manufacturing site, they are looking to recruit an experienced Mechanical Maintenance Engineer to join their established engineering team. You will be working within a team of engineers supporting a busy manufacturing environment, ensuring equipment reliability and helping to drive improvements across the site. The Role The position involves maintaining a wide range of manufacturing equipment and supporting the site’s shift from reactive maintenance to a more proactive, reliability-focused approach. Key responsibilities include: Carrying out reactive and preventative maintenance across production equipment Fault finding and diagnosing mechanical issues within manufacturing machinery Supporting continuous improvement initiatives to improve reliability and efficiency Conducting routine inspections, servicing and repairs on equipment Ensuring all maintenance work is carried out in line with health and safety standards Working closely with production teams to minimise downtime and resolve issues efficiently Supporting site improvement projects and equipment upgrades Monitoring and improving maintenance performance metrics such as MTTR and MTTF Candidate Requirements The successful candidate will have: A time-served mechanical maintenance apprenticeship (minimum NVQ Level 3 or equivalent) At least 4 years’ experience working within a manufacturing environment Strong mechanical maintenance experience including: Welding Machine shop work Pipe fitting Hydraulics Pneumatics Experience with fault finding and root cause analysis Knowledge of steam systems (desirable) Experience working with planned preventative maintenance systems (CMMS) Good IT skills including Microsoft systems A proactive approach with a focus on continuous improvement Strong communication skills and the ability to work collaboratively across teams You must also be comfortable working within a structured maintenance environment, following risk assessments, safe systems of work and lockout/tagout procedures. Additional Information 3 Shift Pattern Team of engineers on each shift Opportunity to work within a complex manufacturing environment Long-term stability with a well-established employer

Maintenance Engineer, Ripley, Days only Salary: £39,362 | OTE including OT: £45-50K | Benefits: Life Assurance, Health Cash Plan Hours: Mon–Thu 07:30–16:30 | Fri 07:30–12:30 About the Company ATA are partnering with a long-established UK engineering business, founded in 1978, with a modern facility in Derbyshire. The company produces high-integrity components for advanced industries including aerospace, energy, and defence. With ongoing investment in machinery, technology, and facilities, the site has a reputation for precision, quality, and innovation. Demand from key sectors continues to grow, driving further expansion and a supportive, collaborative culture led by an experienced engineering team. They are now looking for a maintenance engineer to join their team. About the Role As a Maintenance Engineer, you’ll maintain a range of CNC machinery, including Toyoda 5-axis multi-tasking machines, 5-axis pallet-loading machines, and gantry milling equipment. You’ll be responsible for: Following the planned preventive maintenance schedule Reacting to breakdowns safely and efficiently Mechanical and electrical fault-finding and rectification Managing contractors on site About You As a maintenance engineer, you’ll be multiskilled, able to work safely on both electrical and mechanical systems, with strong fault-finding skills. Knowledge of electrical safety procedures, including LOTO, is essential, and the ability to manage your own workload independently is key. Prior CNC experience is preferred, whether in maintenance, assembly, installation, or service. All CNC types considered, including laser, plasma, waterjet, EDM, etc. Strong maintenance engineers from other backgrounds are also welcome. Benefits & Opportunity At a time when many businesses are holding back, this company continues to invest heavily. Recent site expansion and the installation of a £2 million machine tool show their commitment to innovation. You’ll have the chance to maintain cutting-edge equipment, gain real ownership of your work, and join a forward-thinking business that supports its engineering team and invests in both people and technology If you think you are the right Maintenance Engineer for this market leader, please press apply, call Ashton on (phone number removed), or email your CV too ATA Recruitment specialises in Manufacturing, Infrastructure, Civil, Transportation and general Engineering recruitment on both a permanent and contract basis – for more opportunities like this one, visit our website. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Conrad Consulting is proud to be supporting a leading professional services organisation with a significant footprint across major UK infrastructure programmes. As they continue to enhance their environmental capability, we are seeking an experienced Environmental Consultant to provide specialist guidance and assurance across a diverse range of construction, facilities management, and infrastructure activities within a high‑profile operational environment. The Opportunity This role is ideal for an environmental specialist who thrives in technically complex settings and enjoys influencing best practice across multidisciplinary teams. You will act as the subject matter expert for all environmental considerations, ensuring that projects and operational activities are delivered responsibly, compliantly, and in line with evolving regulatory expectations. Your overarching purpose will be: To lead environmental assurance across construction, FM, and infrastructure operations—embedding robust environmental standards, driving compliance, and safeguarding the organisation’s commitment to sustainable, responsible delivery. Key Responsibilities Provide expert environmental guidance across construction, facilities management, and infrastructure programmes within a regulated operational environment. Lead environmental assurance activities, ensuring alignment with legislation, industry standards, and internal governance. Support the development, implementation, and continual improvement of environmental management systems. Conduct audits, inspections, and compliance reviews to identify risks, opportunities, and areas for improvement. Advise on environmental impacts, mitigation strategies, and sustainable best practice. Collaborate with project teams, operational leads, and stakeholders to embed environmental considerations throughout project lifecycles. About You You will bring: Strong experience in environmental management within construction, infrastructure, engineering, or regulated industrial environments. Solid understanding of environmental legislation and regulatory frameworks. Previous experience of Defence projects would be beneficial Working knowledge of ISO 14001 and its application within complex operational settings. Familiarity with COMAH environments and associated compliance requirements. Excellent communication and influencing skills, with the ability to guide and challenge stakeholders at all levels. A proactive, solutions‑focused mindset with a commitment to continuous improvement

Company Overview: W Talent Engineering and Manufacturing are supporting a market leading manufacturing company based in Derbyshire, our client is dedicated to delivering high-quality products and services to its customers and has gone through exceptional growth in the past few years leading the way in their industry with more sustainably focused products, which he lead to high capex investment. This excellent manufacturer is now in the market for a Maintenance Manager to focus day to day maintenance activities whilst driving a culture of more proactive then reactive behaviours Position Overview: W Talent Engineering and Manufacturing are seeking a highly skilled and apprenticed trained Maintenance Manager to oversee all aspects of this state of the art manufacturing facility based in Derbyshire. The Maintenance Manager will be responsible for developing and implementing maintenance procedures, managing a team of maintenance engineers, and ensuring the reliability and efficiency of all manufacturing equipment. Responsibilities: Develop and implement maintenance policies and procedures to ensure the reliability and efficiency of manufacturing equipment. Plan and schedule preventive maintenance activities to minimise downtime and optimise equipment performance. Manage a team of maintenance engineers, providing leadership, guidance, and training as needed. Manage a team of maintenance engineers, to challenge status quo and drive behavioural change Coordinate with production and engineering teams to prioritise maintenance tasks and minimise disruptions to production schedules. Conduct regular inspections of equipment and facilities to identify maintenance needs and address issues in a timely manner. Oversee the procurement of spare parts and maintenance supplies, ensuring adequate inventory levels and cost-effective purchasing practices. Monitor maintenance performance metrics and implement continuous improvement initiatives to enhance equipment reliability and reduce maintenance costs. Ensure compliance with health and safety regulations and promote a culture of safety among maintenance staff. Develop and manage the maintenance budget, tracking expenses and identifying opportunities for cost savings.Requirements: HNC/HND, apprentice trained in an engineering discipline is required A bachelor's degree in an engineering discipline would be advantageous Multi skilled engineering capability would be advantageous Knowledge of health and safety regulations and best practices. Proven experience in maintenance management within a manufacturing environment. Excellent leadership and team management skills. Proficiency in maintenance management software and Microsoft Office applications. Strong problem-solving abilities and attention to detail. Excellent communication and interpersonal skills. Ability to work effectively under pressure and prioritise tasksWhat's on Offer: £60,000 plus exceptional benefits package Working for a forward-thinking business

Fleet & Sales Support Executive – Join a High-Performing Team in Chesterfield Location: Chesterfield Town Centre Job Type: 12 Months FTC | Start Date: Immediate | Salary: 28Kpa Edwards Employment Solutions Ltd is an award-winning, independent recruitment agency, proudly partnering with some of the most desirable employers across the East Midlands and Yorkshire. We specialise in connecting ambitious individuals with exciting opportunities in the Office Support, Industrial, and Engineering sectors. We are currently recruiting for a Fleet & Sales Support Executive on behalf of a well-established, nationally operating business based in Chesterfield town centre. This is a permanent role offering a long-term career path within a larger organisation, while working as part of a close-knit, supportive team. About the Role This is a varied and rewarding role at the heart of the fleet and sales operations. It’s ideal for someone who enjoys coordination, thrives in a fast-paced environment, and takes pride in delivering a first-class service. You’ll play a key part in supporting internal teams with the smooth running of asset and fleet management processes. If you have experience in the automotive, motor trade, or fleet industry, that’s a bonus — but it’s not essential. What matters most is a great attitude and a willingness to learn. Key Responsibilities: Coordinating and securing specific fleet assets from suppliers Preparing and providing accurate quotes to Field and Sales teams Managing internal asset sales and maintaining accurate records Providing outstanding customer service via phone and email Collaborating with colleagues to meet deadlines and team objectives What We’re Looking For: We’re looking for someone who is proactive, dependable, and eager to contribute to team success. The ideal candidate will have: A willingness to learn, adapt, and get involved in all aspects of the role Confidence and self-motivation, with the ability to use initiative Strong written and verbal communication skills A positive approach to problem-solving and decision-making Previous experience in Fleet or the Motor Trade (desirable, not essential) Excellent attention to detail and a high level of organisation What’s in It for You: This employer is known for offering a welcoming environment, long-term career opportunities, and modern workplace facilities. Benefits include: Competitive salary Free onsite parking Access to a modern, well-equipped workplace Onsite gym facilities Private medical and dental insurance Company car after 12 months of service Regular company events and team socials Complimentary refreshments including tea, coffee, and fresh fruit How to Apply If you're looking for a role where you'll be valued, supported, and challenged to grow — we want to hear from you. Apply today with your CV or contact our team at (phone number removed) for a confidential chat about your suitability

Maintenance Sales Person/ Srvice sales to win New Business (FIRE AND SECURITY OR ELECTRONIC SECURITY NEEDED 10k Car allowance and uncapped commisison ....MUST sell Fire and Security (or either) already (NEED to know INTRUDER, or FIRE or CCTV sales) Service Sales - Selling Fire and Security Service Contracts, Maintenance Agreements) Benefits £30-70k (dependant on sales can bring in/ have completed) Uncapped OTE (Current earning £50000 - £100,000+) £900pm Car allowance + Full permanent benefits Good own brand and Fire and Security products/ service to sell. Fire and Security sales experience of maintenance contracts, multisite service agreements or national accounts requiring their Fire and Security, CCTV, Intruder Alarms, Access Control or Fire Alarms systems serviced and maintained by new company. NOTE - EXPERIENCE REQUIRED, BUT LOCATION FLEXIBLE IN UK. WILL WIN MULTISITE, RETAIL AND NATIONAL ACCOUNTS WORK FOR FIRE FIRE AND SECURITY SERVICE SALES MAINTENANCE CONTRACTS Maintenance Contract/ National Account/ Service Sales - Security Sales Person Required Security sales of maintenance contracts, Preference for multi site service agreements or national accounts wins End user (facilities Manager type contact) NOT electrical contractor or consultants *OVERVIEW You would get an AMAZING opportunity to work for an independent company that is very successful but because of this needs someone who can work with MD and in his absence to get the most from current accounts, keep them happy and also grow new accounts. You will get help and assistance, but would have a growth mindset, get up and go and would be keen to make some money and be success. You would be used to telephone and face to face sales selling systems and maintenance contracts for Fire & Security Systems but will progress career and earnings here • REQUIREMENTS ALL APPLICANTS WILL HAVE TO HAVE WORKED FOR A SSAIB OR NACOSS/ NSI COMPANY TO HAVE THE CORRECT EXPERIENCE SELLING SECURITY SYSTEMS OR FIRE ALARM SYSTEMS, OR FIA COMPANY IF SOLD FIRE ALARMS. *CONTACT US If you HAVE Fire and Security Sales Experience selling Maintenance Agreements are in Service Sales, or a Systems Sales person who sells Fire & Security, a BDM or Business Development manager or a National Accounts manager (who sells or develops or manages accounts for Fire and Security Installation or Maintenance)... please contact us. We ARE NOT looking for people outside of Fire & Security so you would work for a NSI or NACOSS security company or a Fire alarm, CCTV, Access Control and Intruder Installation and Service sales Service company such as SSAIB. LOOKING TO PROGRESS IN FIRE AND SECURITY SALES - PLEASE APPLY! (EXPERIENCE AND SALES ABOVE £350,000 pa NECESSARY FOR THIS ROLE) Fire and Security Careers is a recruitment Agency for Permanent Vacancies in UK

Hays are delighted to be recruiting a Pricing Administrator and Commercial Admin for a leading business in Chesterfield. This is a newly created job role and the successful candidate will play a key role in ensuring product, pricing, and technical information is accurate and consistently presented across the business. This is a detail-driven role suited to someone who enjoys structured work, data integrity, and Excel-based processes. Key Vacancy information Permanent job Full-time Monday - Friday, 9am - 5pm £28,250 salary 100% based in office in Chesterfield Free Parking Based in a busy, fun team Newly created job opportunity due to growth Key Responsibilities This will be a busy role and part of the sales admin department. The successful candidate will be able to demonstrate upon application the experience required to fulfil the brief of the role as described below; Maintain and review product and pricing data across internal systems. Gather and input information for new products and ensure timely updates. Advise and communicate pricing changes to customers and update price lists frequently. Support Directors with pricing bids and routine reviews Sales Quote production Respond to customer requests for data and maintain external systems as required Support to the marketing team to report trends, commercial marketing information reporting Provide cross-functional support to compliance, logistics, marketing, and accounts teamsSkills & Experience Strong Excel skills (formulas, data manipulation, 'v' look up functions,error checking). Exceptional attention to detail and commitment to data accuracy. Experience with product, pricing, or technical data in an administrative role. Experience with customer procurement systems ( not essential) Familiarity with technical product data or supply-chain environments.What you will get in return Growing business with career opportunities Permanent job role, full time Monday - Friday 9am -5pm Excellent offices and modern facilities Salary guide £28,250 - £28,250 Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Salary: £60,000p/a * Additional uplift when working away * Working weekends when traveling is double time * Company Pension Scheme * When traveling an upfront payment is made directly to cover meal expenses etc. (amount dependant on country of destination) Reporting to: Operations Manager Department: Service Department Location: Chesterfield based, with travel (UK & Overseas) Permanent Position Shifts: Chesterfield Workshop (Mon-Thurs 7.00am till 14.00pm & Fri 7.00 am till 11.00am) – Traveling hours (Flexible) Generations are excited to be recruiting a Service engineer to join an innovative and industry-leading company with specialist expertise and experience in the design, manufacture, and installation of environmental machinery. Purpose of Role: To represent the Company in a positive manner, it is a proactive point of contact for customers and strive to develop and nurture client relationships. Work with customers at their premises, representing the Company, leading internal and external teams through the Servicing, maintaining and repairing our products. Be a technical reference point for all Products, feedback to our engineering teams and drive evolution. Help to drive a positive health and safety culture in every aspect of your role. To support the delivery of engineered and manufactured products by providing a programming, testing, fault finding and quality inspection service for full electrical control units and components in line with business requirements. Service Responsibilities & Duties: * You will be part of the Projects and Services Teams involved in the breakdowns and servicing of equipment and systems supplied to our global customer’s. * You will be required to travel at short notice * The position is a mixed office/shop/site role with regular overseas travel to perform service visits at customer facilities to troubleshoot and resolve electrical, mechanical, and software issues, and/or to handle scheduled maintenance tasks. * Servicing, maintaining and repairing of electrical and mechanical equipment aimed at improving reliability and efficiency. * Coordinate with the customer or third-party contractor to accomplish tasks. * Provide training and useful information to customer representatives, operators, engineers, and management. * Prepare all documentation related to on-site activities including site visit reports, marked up as built drawings, time sheets, and commissioning documents. * Provide technical support to customers to resolve plant breakdown or reliability issues. * Document any issues or product improvement ideas and present this information to the team. * Occasionally remotely supporting customers will be required out of hours, this is due to the global time zones. * Assist with the assembly and factory acceptance testing of products at our facility in the UK * This role requires frequent and sometimes short notice travel to many parts of the world. It is expected that this could be up to 30-40% of your working time. * Responsible for planning and booking your own travel to the destination required. * When not traveling to customer site the Testing role below will be carried out in our Chesterfield workshop. * Any reasonable work request to support the business needs. Testing Responsibilities & Duties: Setting up PLCs, HMIs to the required standard Testing electrical control units to ensure compliance with the required outputs Fault finding in the event of non-compliance of electrical controls and performing root cause analysis investigations to understand the failure mode Implementation of corrective and preventative actions to return the controls to required standard and outputs. Maintaining, supporting and upgrading hardware & software in line with business requirements Ensuring all work is completed in line with the business safe operating procedures providing no risk to H&S Complete all required electrical controls in line with production schedule, ensuring on time in full All work completed to the Quality standard requirements ensuring fully compliant work including but not limited to current safety regulations and external and internal quality standards Fully responsible for taking ownership for area of work, maintaining a safe as practically possible working environment ensuring good housekeeping, safe working practices and general workplace maintenance Environment, Health & Safety: In addition to the role Responsibilities, every employee has overall responsibility for: Taking reasonable care for your own Health and Safety and the Health and Safety of others who may be affected by your actions. Working with the Company to ensure a high standard of Environmental Health and Safety management by following the site EHS procedures. Ensuring compliance with all relevant quality standards/procedures in your area. This includes reporting any deviations from these standards/procedures, completing corrective actions and making recommendations to prevent similar deviations in the future. Maintains safe and clean working environment by enforcing procedures, rules, and regulations. Maintains product and company reputation by complying with applicable regulations. Qualifications & Experience: * Time served (Engineering discipline Electrically biased) * Min. 2 years’ electrical installation / service experience (mechanical experience would also be an advantage) * ECS / CSCS Card (preferred) * Min 5 GCSE’s Grade C and above * Experience in Plant / Cast House / heavy manufacturing Environments * Computer literacy with MS Office, Outlook and Adobe software. * Competent in reading both Electrical and Mechanical drawings essential * Hydraulic experience (preferred) * Comfortable and a basic understanding of computers/ computerized systems * Basic knowledge of PLCs, HMIs, company’s electrical hardware and software * Ability to identify non-compliance

Temporary Receptionist/Front Of House (Temporary - 4 Weeks Minimum) £13 per hour We are currently seeking a professional and reliable Corporate Receptionist to join our team on a temporary basis, starting Monday 20th April. This role is for a minimum of 4 weeks, with the potential for extension. Location: Chesterfield Hours: Monday to Friday, 8:30am - 5:30pm (1-hour unpaid lunch break) The Role: As the first point of contact for visitors, clients, and staff, you will play a key role in creating a welcoming and professional environment. Responsibilities include managing the reception area, answering calls, coordinating meetings, handling post and deliveries, issuing visitor badges, and supporting day-to-day facilities and office operations. You will also ensure health & safety procedures are followed and maintain confidentiality at all times. Key Responsibilities Include: Greeting visitors and managing sign-in procedures Answering and directing incoming calls Managing mail, deliveries, and courier services Scheduling meetings and preparing meeting rooms Ordering office supplies and catering Coordinating visitor and contractor access Reporting maintenance and facilities issues Upholding excellent customer service standards About You: You will be professional, organised, and confident in a corporate front-of-house environment, with strong communication skills and a customer-focused approach. If you're available immediately and looking for a professional reception role, we'd love to hear from you. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Sue Ross Recruitment are delighted to be recruiting on behalf of our client, a long‑established and highly respected professional services organisation, for an organised and proactive Office Administrator to join their Chesterfield-based team. This is a key role at the heart of the business, supporting the smooth day‑to‑day running of the office and ensuring colleagues, visitors, and clients receive an exceptional experience. The position would ideally suit someone who thrives in a varied role, enjoys being the go-to support within an office environment, and takes pride in keeping operations running seamlessly. Working closely with the wider administrative team, you will support the following core operational areas: Front of House • Acting as the first point of contact for visitors and callers, • Providing a warm, professional welcome to clients, • Managing meeting rooms, including set‑up and refreshments, • Handling incoming calls, mail and general enquiries Facilities & Property Coordination • Liaising with suppliers and contractors, • Assisting with maintenance schedules and property-related services, • Helping maintain a safe, compliant and professional office environment General Administration • Providing day‑to‑day administrative support including printing, scanning, binding and document preparation, • Managing office supplies, stationery, PPE and consumables, • Overseeing pool car bookings and basic vehicle checks, • Supporting travel coordination where required, • Assisting with CPD coordination in collaboration with the Training team Health & Safety • Acting as Fire Marshal and First Aider (training provided), • Carrying out routine H&S checks and reporting, • Contributing to a safe and compliant workplace Skills & Experience Required • Previous experience within an administrative or office-based role, • Strong organisational and time-management skills, • Excellent communication skills with a professional, approachable manner, • High level of accuracy and attention to detail, • Ability to work both independently and as part of a team, • Calm under pressure, with the ability to manage a varied workload, • Cost-conscious and able to support budget awareness This is a full-time, fully office based role, working 35 hours per week. Unfortunately due to the number of applications we receive, we are unable to provide individual feedback to all applicants. Please assume that if you do not hear from us within 72 hours that your application has been unsuccessful on this occasion. May we take this opportunity to thank you for expressing an interest in one of our roles and wish you the very best in your search for employment