Trabajos quality control engineer en EdinburghCrear alertas

Job Title: Fire & Security Service Engineer\n\nLocation: Edinburgh\n\nJob Type: Full-Time, Permanent\n\nSchedule: Monday to Friday (plus call-out rota as required)\n\nJob Purpose\n\nWe are looking for a skilled and reliable Fire & Security Service Engineer to join our growing Fire & Security Service teams. In this role, you will be responsible for delivering Planned Preventative Maintenance (PPM), Reactive Maintenance, and emergency support across a range of Fire & Security Systems. You will play a key role in ensuring compliance, safety, and system reliability across customer sites.\n\nKey Responsibilities\n\n * Carry out routine PPM in line with scheduled tasks and industry standards.\n\n * Respond effectively to reactive maintenance calls, breakdowns, and emergency situations.\n\n * Perform fault diagnosis and repairs on a range of fire alarm, CCTV (IP & analogue), access control, and intruder alarm systems.\n\n * Ensure compliance with all relevant Health and Safety legislation and company procedures.\n\n * Complete detailed and accurate job documentation, reports, and asset records.\n\n * Coordinate with subcontractors and suppliers for specialist system support and installations.\n\n * Support and liaise with clients, ensuring a high level of customer satisfaction.\n\n * Take part in an on-call rota for emergency response, as required.\n\n * Identify opportunities for system upgrades, replacements, or improvements.\n\n * Assist other trade teams on-site when required.\n\n * Work proactively to support continuous service improvement and contract growth.\n\nWorking Relationships\n\nInternal:\n\nEngineering Coordinators\n\nService Managers\n\nExternal:\n\nClients and client representatives\n\nSubcontractors, suppliers, and system manufacturers\n\nQualifications & Experience\n\nEssential:\n\n * Recognised Fire & Security Apprenticeship or equivalent experience\n\n * Health & Safety training (e.g. Manual Handling, Working at Height)\n\n * Strong experience in fire alarm systems with supporting certifications\n\n * IP and analogue CCTV system experience\n\n * Current ECS card with Chapter 8 awareness\n\n * IPAF trained\n\n * Minimum of GCSEs (or equivalent) in Maths and English\n\n * Industry experience in service, fault finding, and maintenance of fire & security systems\n\nDesirable:\n\nCity & Guilds 2360 Part 3 or equivalent qualification\n\nExperience with IT and networking related to security systems\n\nSupervisory experience (or ambition for future progression)\n\nKey Competencies\n\n * Teamwork: Works collaboratively to achieve shared goals\n\n * Communication: Clear, professional, and effective with all stakeholders\n\n * Planning & Organisation: Manages time, tasks, and priorities efficiently\n\n * Commercial Awareness: Understands the impact of costs and efficiencies\n\n * Risk Awareness: Identifies and mitigates operational risks\n\n * Customer Focus: Delivers excellent service and builds positive relationships\n\n * Adaptability: Responds positively to change and challenge\n\n * Self-Motivation: Demonstrates initiative and a proactive approach\n\n * Drive for Excellence: Committed to continuous improvement and quality\n\nHealth & Safety\n\nAll staff are required to take reasonable care for the health and safety of themselves and others, and to comply with all company health and safety policies and procedures.\n\nDiversity, Equity & Inclusion at Dalkia\n\nAt Dalkia, we are committed to building a diverse and inclusive workforce that reflects the communities we serve. We value every individual and provide a supportive and respectful environment that promotes equality of opportunity. We welcome applications from all backgrounds, and we are proud to be an equal opportunity employer. Together, we aim to foster a workplace where everyone feels empowered to thrive and contribute their best.\n\nApply now to join a dedicated and forward-thinking engineering team focused on safety, reliability, and service excellence in fire and security systems

Staff Verification Engineer / Tech Lead Edinburgh Compensation: Competitive base salary + bonus + RSUs Additional Support: Relocation package and visa sponsorship available (if required) I am seeking a highly skilled and motivated Staff Design Verification Engineer to join a global semiconductor company based in Edinburgh. In this role, you will be responsible for ensuring the functional correctness and robustness of complex digital and mixed-signal ASIC designs using advanced verification methodologies. You will collaborate closely with architects, designers, and fellow verification engineers to deliver high-quality silicon solutions. Relocating to Edinburgh offers an excellent balance between career growth and quality of life. As a key UK hub for semiconductor and embedded systems development, the city provides access to impactful ASIC and verification work without the intensity and high cost of living associated with larger tech centres. You’ll have the opportunity to work on real silicon in technically engaged teams, where senior engineers can make a meaningful impact. Beyond work, Edinburgh offers a compact, walkable environment, rich cultural heritage, and easy access to nature—contributing to a more balanced and rewarding lifestyle. Key Responsibilities • Develop and execute comprehensive verification plans for complex mixed-signal ASIC designs, • Create and maintain testbenches using SystemVerilog and UVM, • Write and debug test cases to validate functionality, performance, and corner cases, • Perform block-level and full-chip verification, including simulation, coverage analysis, and regression debugging, • Collaborate with design engineers to understand specifications and define verification requirements, • Analyze and resolve issues identified during verification and post-silicon validation, • Mentor junior engineers and contribute to improving verification methodologies and infrastructure, • Participate in code reviews and drive continuous improvement in design and verification practices, • Manage and debug gate-level simulations Qualifications • 10+ years of experience in digital and/or mixed-signal design verification, • Strong proficiency in SystemVerilog, UVM, and industry-standard simulation tools, • Solid understanding of digital design fundamentals, RTL design, and ASIC development flows, • Experience with scripting languages such as Python, Perl, or Tcl for automation, • Familiarity with formal verification, assertion-based verification, and coverage-driven methodologies, • Strong analytical and problem-solving skills with attention to detail, • Excellent communication and teamwork abilities, • Experience with version control systems and CI/CD workflows, • Exposure to additional methodologies (e.g., eRM, HW/SW co-simulation) is advantageous, • Knowledge of standard protocols such as AMBA, I2C, etc. is desirable What’s on Offer This is an excellent opportunity to join a leading semiconductor company in one of the UK’s most desirable cities. The role offers a competitive compensation package, including a base salary of up to £95,000 (DOE), RSUs, and a performance-based bonus. Relocation assistance and visa sponsorship are available where required. For more information, please contact Rachel Mason at IC Resources.

At Spacelabs Healthcare, we’re committed to transforming healthcare through continuous innovation. Our scalable solutions deliver critical patient data across local and remote systems, enabling clinicians to act with confidence and improving outcomes for patients worldwide. We are seeking a Senior Quality Assurance Engineer who will play a pivotal role in ensuring our medical devices are safe, effective, and compliant. This individual will lead Design Controls, Risk Management, and Quality Management System (QMS) governance throughout the product lifecycle—primarily focusing on design and pre‑market activities. Acting as a trusted partner to R&D and Regulatory Affairs, you will help drive informed decision‑making that safeguards patients while enabling compliant innovation. Key Responsibilities Design & Development Quality Leadership • Champion critical thinking across product development teams throughout all stages of design and development., • Serve as a subject‑matter expert in Design Controls, Risk Management, Electrical Safety, and Usability Engineering., • Ensure all design activities are properly executed, accurately documented, and compliant with internal procedures and global regulatory requirements., • Review Engineering Change Orders (ECOs) and design changes to confirm sound engineering practice and maintained device safety and effectiveness., • Oversee efficient progression of design changes with complete, traceable, and compliant documentation., • Participate in cross‑functional design reviews, assessing design plans, inputs, outputs, V&V evidence, and change records., • Identify potential safety or performance concerns and support appropriate risk management activities., • Ensure design decisions are fully justified, documented, and aligned with regulatory expectations. Risk Management • Contribute to risk management activities in accordance with ISO 14971., • Support hazard analyses, FMEAs, and related risk management documentation., • Ensure risk control measures are implemented, verified, and supported by objective evidence., • Provide structured, risk‑based decision‑making to support product safety and compliance., • Ensure risk–benefit evaluations are complete, clear, and aligned with global regulatory expectations. Material Review Board (Design‑Related) While the role does not oversee manufacturing or service activities, you will: • Participate in design‑related reviews of nonconforming materials and investigations where they impact design decisions, safety, or documentation., • Communicate trends or recurring issues to design teams., • Support corrective actions or design improvements based on nonconformance insights. QMS Administration • Conduct internal quality audits to verify compliance with procedures and regulatory expectations., • Lead or support CAPA activities, ensuring effective verification and complete documentation., • Manage process change control for design‑related processes, ensuring proper evaluation, documentation, and approval., • Support external audits/inspections by representing design‑related quality processes., • Educate internal teams on quality obligations and alignment with the Spacelabs Quality Policy., • Maintain and improve QMS procedures, work instructions, and templates. Qualifications • Bachelor’s degree in Quality, Engineering, or related fields (e.g., Computer/Software, Biomedical, Mechanical, Electrical)., • 7+ years of relevant Quality or Engineering experience., • 5+ years working with medical device regulatory requirements, quality standards, and QMS., • Experience maintaining Technical Files, GSRPCs, Risk Management Files, Usability Files, Design History Files, MVPs, and Change Control documentation., • Experience with statistical analysis., • Knowledge of Software as a Medical Device (SaMD) or software within medical devices., • Experience collaborating with teams under design controls during new product development., • Strong communication skills across all levels of an organization., • Highly self‑motivated, organized, and proactive.

Senior Software Engineer – Edinburgh – up to £75K plus benefits (Remote role) Change Digital are supporting a Global Software Technology company in their search for a Senior Software Engineer. As a senior team member, you will be actively involved in mentoring colleagues, driving architecture decisions, developing and improving features and working directly with stakeholders to deliver world-class products. This role focuses on hands-on technical excellence and contributing to the technical evolution of critical systems in a .NET and Azure environment. This is a great opportunity to join a very close-knit, globally dispersed team that thrives in an ecosystem that supports individual excellence and takes pride in its diverse and inclusive work culture centred around great people practices, learning opportunities and having fun! The company culture is the ideal blend of entrepreneurial spirit and enterprise investment, enabling the chance to move at a rapid pace with some of the most complex, leading-edge technologies available. Essential Duties & Responsibilities: The company pushes the boundaries of what is possible in a browser-based application. You will be involved in the development of a key component of our document automation solution and enabling a unification of our client-side and server-side processing, using a variety of technologies including TypeScript and Node.js. In your career you will have worked in an agile team to deliver software of significant complexity. You will be happy working on complex domains or looking at solutions in their wider context. As part of a cross-skilled team, you will: • Write code every day to solve business problems., • Help to drive the engineering quality within the team., • Collaborate with the Team Lead and Product Owner to refine and deliver the best possible solutions., • Interact with the rest of the business to gain deep understanding of our products, customers, and users. Requirements & Skills: Successful candidates will have significant professional experience within a software engineering team and will be: • Capable of delivering robust quality solutions with a high level of autonomy., • Excellent at technical communication and collaboration., • Excited to write a complex browser-based application., • Passionate about great UX and UI. Experience in the following is essential: • 6+ years in software development, with strong expertise in C# on both .NET Framework and .NET Core platforms., • Experience of working with cloud platforms, ideally Microsoft Azure., • Experience of working with, analyzing and debugging production systems., • Strong experience of web development with security-first mindset and knowledge of secure web application practices., • Strong experience creating and consuming APIs, using patterns such as REST., • Experience with ASP .NET MVC, JavaScript or TypeScript., • Strong experience using git, pull request workflows and best practices around branching and source control., • Understanding of production system requirements for enterprise customers including performance, stability, security, and scalability considerations., • Experience working on legacy system modernization projects., • Hands-on experience with containerization concepts (e.g., Docker)., • Proficient in SQL Server and database performance optimization., • SPA frameworks / libraries, preferably React, • Building complex web applications, • Git Experience in the following is desirable: • Azure DevOps, • Docker, • Node.js This role is urgent in nature so please email your CV to or call 077 375 38 248 for more information.

Company Description Waterwhelm's innovative water re-use and desalination technology operates at significantly lower pressures than traditional methods, reducing both capital and maintenance costs. Using waste heat or solar thermal energy, the solution achieves the lowest electricity consumption rate and CO2 emissions in the industry. This groundbreaking circular approach is revolutionising the global water sector by delivering sustainable and cost-effective solutions. Role Description This is a full-time, on-site role based in Edinburgh for a Mechanical Engineer. The Mechanical Engineer will be responsible for designing and developing machinery, creating detailed technical drawings using Computer-Aided Design (CAD) software, and contributing to Research and Development (R&D) projects. Additionally, the role will involve overseeing project management tasks, ensuring timely delivery and effective collaboration across multidisciplinary teams. We are seeking an experienced Mechanical Engineer to take on a dual-role position combining technical engineering expertise with project management responsibilities. This role is ideally suited to a hands-on professional with a strong background in process plant environments, particularly those involving corrosive fluids and explosive gases. Approximately 50% of the role will focus on engineering design, equipment selection, and site work, with the remaining 50% dedicated to managing the successful delivery of plant construction projects. Key Responsibilities Mechanical Engineering (50%) • Specify, select, and evaluate equipment including heat exchangers, pumps, valves, pipework, and structural steel for process plant applications., • Apply in-depth knowledge of materials and component performance in environments involving corrosive fluids and explosive gases., • Oversee and actively participate in the installation of mechanical systems and machinery., • Supervise installation crews on-site, ensuring work is carried out safely, efficiently, and to specification., • Carry out hands-on work where required during installation and mechanical assembly., • Plan, coordinate, and manage all phases of process plant construction projects., • Develop and maintain detailed project schedules, ensuring milestones and deadlines are met., • Perform cost control and budget tracking throughout the project lifecycle., • Manage vendor relationships, including procurement, expediting, and performance monitoring., • Lead detailed resource planning, including labour, materials, and equipment allocation., • Degree in Mechanical Engineering or a related discipline., • Proven experience in process plant environments, particularly with corrosive and hazardous media., • Strong technical knowledge of process plant machinery and components., • Demonstrated experience selecting and specifying mechanical equipment., • Hands-on experience with installation and commissioning of industrial systems., • Solid project management experience, including scheduling, budgeting, and vendor coordination., • Strong leadership and communication skills with the ability to manage teams on-site., • Experience working in industries such as chemical processing, oil & gas, or energy., • Familiarity with relevant industry standards and safety regulations., • A dynamic role combining engineering and leadership responsibilities., • Opportunity to work on complex and technically challenging projects., • Competitive salary and benefits package., • Career development and progression opportunities.

Job Title: Fire & Security Service Engineer Location: Edinburgh Job Type: Full-Time, Permanent Schedule: Monday to Friday (plus call-out rota as required) Job Purpose We are looking for a skilled and reliable Fire & Security Service Engineer to join our growing Fire & Security Service teams. In this role, you will be responsible for delivering Planned Preventative Maintenance (PPM), Reactive Maintenance, and emergency support across a range of Fire & Security Systems. You will play a key role in ensuring compliance, safety, and system reliability across customer sites. Key Responsibilities • Carry out routine PPM in line with scheduled tasks and industry standards., • Respond effectively to reactive maintenance calls, breakdowns, and emergency situations., • Perform fault diagnosis and repairs on a range of fire alarm, CCTV (IP & analogue), access control, and intruder alarm systems., • Ensure compliance with all relevant Health and Safety legislation and company procedures., • Complete detailed and accurate job documentation, reports, and asset records., • Coordinate with subcontractors and suppliers for specialist system support and installations., • Support and liaise with clients, ensuring a high level of customer satisfaction., • Take part in an on-call rota for emergency response, as required., • Identify opportunities for system upgrades, replacements, or improvements., • Assist other trade teams on-site when required., • Work proactively to support continuous service improvement and contract growth. Working Relationships Internal: • Engineering Coordinators, • Service Managers External: • Clients and client representatives, • Subcontractors, suppliers, and system manufacturers Qualifications & Experience Essential: • Recognised Fire & Security Apprenticeship or equivalent experience, • Health & Safety training (e.g. Manual Handling, Working at Height), • Strong experience in fire alarm systems with supporting certifications, • IP and analogue CCTV system experience, • Current ECS card with Chapter 8 awareness, • IPAF trained, • Minimum of GCSEs (or equivalent) in Maths and English, • Industry experience in service, fault finding, and maintenance of fire & security systems Desirable: • City & Guilds 2360 Part 3 or equivalent qualification, • Experience with IT and networking related to security systems, • Supervisory experience (or ambition for future progression) Key Competencies • Teamwork: Works collaboratively to achieve shared goals, • Communication: Clear, professional, and effective with all stakeholders, • Planning & Organisation: Manages time, tasks, and priorities efficiently, • Commercial Awareness: Understands the impact of costs and efficiencies, • Risk Awareness: Identifies and mitigates operational risks, • Customer Focus: Delivers excellent service and builds positive relationships, • Adaptability: Responds positively to change and challenge, • Self-Motivation: Demonstrates initiative and a proactive approach, • Drive for Excellence: Committed to continuous improvement and quality Health & Safety All staff are required to take reasonable care for the health and safety of themselves and others, and to comply with all company health and safety policies and procedures. Diversity, Equity & Inclusion at Dalkia At Dalkia, we are committed to building a diverse and inclusive workforce that reflects the communities we serve. We value every individual and provide a supportive and respectful environment that promotes equality of opportunity. We welcome applications from all backgrounds, and we are proud to be an equal opportunity employer. Together, we aim to foster a workplace where everyone feels empowered to thrive and contribute their best. Apply now to join a dedicated and forward-thinking engineering team focused on safety, reliability, and service excellence in fire and security systems.

Electrical Engineer or Senior Engineer Glasgow or Edinburgh About us Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. About the role We have an opportunity for an Electrical Engineer or Senior Engineer to play a key role in delivering high quality, sustainable electrical engineering solutions across multiple projects in the built environment. You will join our Electrical team based in either our Glasgow or Edinburgh office, offering the opportunity to work with both offices and contribute to projects across Scotland and the wider UK. It’s an exciting time to join our Scotland team. Our Glasgow office—established in 2016 to provide a local presence for projects—has grown into a hub of sector expertise and knowledge that supports work across the UK. The opening of our Edinburgh office reflects our commitment to strengthening relationships with clients on the East Coast by providing a local base for those projects. This role can be based in either Glasgow or Edinburgh, We are a recognised leader in the built environment, shaping some of the most ambitious and technically demanding projects across the residential, hospitality, leisure, commercial, and complex engineering sectors. Our work spans cutting-edge healthcare and research facilities, a broad range of education projects—from primary and secondary schools to further and higher education campuses—high-performance data centres, critical infrastructure and state-of-the-art manufacturing and technology environments. These projects push boundaries and deliver real‑world impact. Driven by a commitment to excellence, we combine innovation, technical expertise, and practical delivery to create solutions that are not only robust and reliable, but forward-thinking and sustainable. Our teams work at the forefront of the industry, collaborating with leading clients across the public and private sectors, both locally and internationally. Working alongside a range of specialist engineers and consultants, you will be joining a collaborative, knowledgeable, highly engaged team who love what they do, and offer a supportive, flexible, and high-performing work culture. You will own project deliverables, manage elements of the internal delivery team, and liaise with multidisciplinary colleagues, clients and contractors to ensure holistic, compliant and commercially aware solutions. You will typically lead defined elements and smaller projects (Engineer) or take full lead responsibility for larger schemes and broader client engagement (Senior Engineer). You will be helping to develop junior staff and foster relationships that support future business growth. In this key and varied role, you can expect to: • Take briefs and deliver electrical design work from inception through to completion., • Produce electrical calculations, drawings and technical documentation that comply with relevant regulations, design guides and client standards., • Ensure quality standards and technical accuracy across deliverables., • Coordinate electrical design with other disciplines (MEP and our specialist groups) and third‑party consultants., • Review and comment on technical information provided by contractors and sub‑contractors; check site installations against the design intent., • Attend and report at design team meetings, client meetings and project meetings., • Witness selected testing and commissioning activities and support handover documentation., • Manage own workload to meet programme deliverables and report progress to your line manager., • Contribute to the professional development of junior colleagues. Additional responsibilities for Senior Engineer: • Develop briefs and take responsibility for delivering a small project or the electrical discipline on a significant/complex scheme., • Exercise considerable autonomy and take ownership for technical decisions and project delivery within cost constraints., • Delegate, manage and check work undertaken by others; mentor and motivate colleagues across project teams., • Play an active role in commercial aspects (scope, risk, cost control) and ensure outputs meet project and budgetary requirements. About you To be successful in this role you’ll need: • Degree or equivalent in Electrical/Building Services Engineering; industry membership preferred., • Working towards or holding IEng/CEng., • Strong technical competence in LV distribution, lighting, earthing/protection and emergency/standby systems; able to produce calculations and drawings., • Proficient with industry software (Revit, AutoCAD, Dialux, OM Electrical) and MS Office., • Able to work independently: deliver an element of a project (Engineer) or lead discipline/small projects and larger schemes (Senior)., • Effective communicator with experience coordinating multidisciplinary teams and liaising with clients/contractors., • Experience of site checking, witnessing testing/commissioning and reviewing contractor submissions., • Demonstrable commitment to meeting programmes and quality standards; commercially aware., • Supportive team player who mentors junior staff and pursues continuous professional development (Senior expected to supervise; Engineer to support). How to apply To apply simply complete a CV profile and submit your application, or for further information please contact If shortlisted, one of our recruitment team will be in touch to arrange an introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. We aim to provide feedback at each stage of the process. Adjustments and accommodations If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. Data privacy We have updated our terms and conditions for candidates, click here to find out more. Recruitment agencies We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list.

Mechanical Project Manager Location: Edinburgh, Scotland Company: Dalkia Scotland Reports to: Operations Manager Job Type: Full-Time Job Purpose At Dalkia Scotland, we’re looking for an experienced and motivated Mechanical Project Manager to join our team. You’ll be responsible for delivering exceptional service to our customers while ensuring projects are completed profitably, on time, and to a high standard. Key Objectives • Deliver projects safely, on time, within budget, and to the agreed specification., • Control costs and enhance profitability., • Drive customer satisfaction and support employee development., • Meet and exceed company performance targets through effective leadership. Key Responsibilities • Lead the successful completion of projects according to quality and commercial targets., • Foster strong customer relationships and identify opportunities for future business., • Ensure installations meet all required standards and regulations., • Develop, lead, and motivate project teams and subcontractors., • Manage budgets and report financial performance to senior management., • Prepare tenders for additional work as required., • Support technical delivery by leveraging internal and external expertise., • Carry out staff appraisals and support succession planning within your team., • Comply with all Health & Safety policies and company procedures. About You Essential Qualifications & Experience • HNC or higher in Building Services Engineering (or equivalent)., • Come from a Mechanical background (Plumbing, Heating, Pipe-fitting etc), • Strong senior management and technical experience in M&E., • Proven knowledge of commercial, financial, and project delivery., • Excellent communication and customer service skills., • High levels of self-motivation and the ability to lead others. Desirable • Chartered Engineer status and a relevant degree., • Financial management experience., • Strong leadership with a commitment to delivering high-quality service. Key Competencies • Leadership & Direction, • Results Through People, • Drive for Excellence, • Team Collaboration, • Clear Communication, • Strategic Planning & Execution, • Commercial & Financial Acumen, • Risk & HSE Management, • Customer Relationship Management Why Join Us? At Dalkia Scotland, we believe in empowering our people to grow and excel. You’ll work in a supportive, team-oriented environment where your contributions directly impact our success. Diversity, Equity & Inclusion Dalkia Scotland is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace where everyone feels respected and valued. We welcome applications from candidates of all backgrounds, abilities, and experiences. Ready to take the next step in your project management career? Apply now to join the Dalkia Scotland team.

DevOps Engineer This hybrid role is based in Edinburgh Why Bright Ascension? Join Bright Ascension and be part of a fast-growing, innovative company transforming how software is built for the space industry. Our technology is used by organisations around the world from universities and space agencies to pioneering start-ups and commercial space companies helping them design and operate space systems faster, more efficiently, and more reliably. Innovation drives everything we do, and our people are at the heart of that success. Through our employee ownership model, everyone has a voice and a genuine stake in the company’s future. With offices in Dundee, Edinburgh, and Bristol and a team of more than 50 talented professionals, we’re entering an exciting phase of growth and expansion. It’s a fantastic time to join us and help shape the future of space technology while building your career in one of the most exciting industries on Earth. We are looking for an experienced and motivated DevOps Engineer. This will be a key role in supporting the delivery of a diverse range of software products and bespoke software services including embedded firmware, developer kits, and scalable cloud-based web applications, as we approach our next exciting period of growth. As a key member of our team, you will design, maintain, and report on the effectiveness of automated build and release pipelines, deploy reliable and secure test environments, and boost developer productivity by creating reusable, well-documented pipeline configuration. We see this role as being full time. Ideally, we would like this role to be based in Edinburgh on a hybrid basis to allow for regular interaction with the wider business and colleagues in other departments. We are at a very exciting time in our ambitious growth plans and have fantastic opportunities for talented individuals to join our team over the next 12 months. What you will do As a member of the team your key responsibilities would be: • Build, test and deploy infrastructure and applications using CI/CD and Infrastructure-as-Code technologies, • Work closely with our engineering teams to understand their requirements and how they build, test and deploy their software to continuously improve quality and accelerate the pace of development, • Set up and maintain environments for both manual and automated testing, ensuring stability, observability and security best practices, including liaising with customers when deploying to customer infrastructure We see experience with the following as essential to the job: • Distributed version control systems (Git, Mercurial etc.), • Expertise with CI/CD tools (Jenkins, GitHub Actions, GitLab CI, Azure DevOps etc.), • Strong scripting ability (e.g. Python, Shell, PowerShell), • OCI container build, management and orchestration (Docker, Podman, Kubernetes, LXC etc.), • Artifact and dependency management and deployment, • Familiarity with networking fundamentals including DNS, IP, firewalls and basic network troubleshooting including VPN configuration Personal skills We're especially looking for someone who: • Enjoys problem solving in a range of programming languages and has an interest in learning new languages, frameworks and build systems, • Works well both independently and in a team as part of a fast-paced technical environment, • Possesses strong verbal and written communication skills, • Is consistently curious, interested in learning new skills and open to new ideas and ways of working Desirable skills and experience This is a wish list and we don’t expect candidates to have experience with everything listed here. We know that experience with specific systems, tools and languages is transferable. We are looking for someone with a broad range of experience who can analyse requirements, select the most suitable tool for the job, adapt to change and is self-motivated to direct their own learning and development. • Infrastructure-as-Code technologies such as Pulumi, Terraform or Cloud-Config, • Configuration management tools such as Chef, Puppet, Ansible or Salt, • Setup and configuration of artifact repositories and package management such as Artifactory, Nexus, Maven, Docker registries or PyPI repositories, • Building reporting dashboards for code quality, test coverage, pipeline performance and release metrics, • Automated testing frameworks including unit, integration and hardware-in-loop testing, • Monitoring and reporting tools, time-series databases and Grafana, • Linux server administration, • Experience with cloud deployment and containerisation technologies, • Secure pipeline design including secrets management, code signing, SBOM and supply-chain security What we can offer you • A highly competitive salary depending on experience with regular reviews, • A fantastic opportunity to join a growing, innovative, employee-centred business pushing boundaries in the space industry, • Flexible hours and hybrid working enabling you to create your ideal work life balance, • 36 days paid holiday per annum, • 6% employer pension contribution, • Enhanced Company Sick Pay and Long-Term Sickness cover, • Health Cash Plan covering dental, physio and optical costs, • Life Assurance cover (4x salary), • Employee ownership through our Employee Benefit Trust, • Enhanced maternity, paternity and adoption pay, • Opportunities for international travel for exhibitions and trade shows, • Investment in your professional development including attendance at relevant events and conferences, • Company events and regular activities for social engagement and team building, • An open, supportive and inclusive environment where you can explore ideas and make a real impact on the product and business Our values • A fantastic opportunity to join a growing, innovative, employee-centred business pushing boundaries in the space industry., • Flexible hours and hybrid working., • 36 days paid holiday per year., • 6% employer pension contribution., • Enhanced Company Sick Pay and Long-Term Sickness cover., • Health Cash Plan covering dental, physio, and optical costs., • Life Assurance cover (x4 salary)., • Employee ownership through our Employee Benefit Trust., • Enhanced maternity, paternity, and adoption pay., • Opportunities for international travel for exhibitions and trade shows., • Investment in skill development and access to relevant events and conferences., • Company events and activities for social engagement and team building. Our values underpin everything we do and guide how we work, collaborate, and grow: • Passion & Innovation – Enjoy what you do and have fun. Be curious and fearless. Unconventional ideas and passion drive true innovation., • Teamwork & Collaboration – Share knowledge, start a dialogue, and succeed together. Success comes through collaboration and support., • Security clearance eligibility may be required depending on project assignments, • An enthusiasm for the space sector and an interest in contributing to the next generation of satellite‑software technologies will be advantageous All applicants must be UK based and have the right to work in the UK. We are working with trusted recruitment partners. No agency enquiries please. Read more: ___

Protec Fire and Security Group/A Bosch Company have an opportunity for a Fire and Security Area Service Manager in Scotland.\n\nThe Area Service Manager is responsible for managing day-to-day service operations within a defined area. The role ensures that service delivery meets SLAs, customer expectations, and company standards while supporting the Regional Service Manager in operational, financial, and team objectives.\n\nKey Responsibilities\n\n1. Operational Management\n\nManage and coordinate service operations across the assigned area to ensure SLA compliance.\n\nAllocate and schedule engineers effectively to meet service demand.\n\nMonitor service performance, including first-time fix rates, response times, and efficiency.\n\nImplement local process improvements to optimize operations.\n\n2. Team Leadership\n\nSupervise engineers and service staff in the area, providing coaching, guidance, and performance feedback.\n\nSupport training and development initiatives to ensure staff competence.\n\nPromote a culture of safety, accountability, and operational excellence.\n\n3. Customer & Account Management\n\nMaintain close contact with clients within the area to ensure satisfaction and address issues promptly.\n\nHandle day-to-day escalations and resolve operational problems efficiently.\n\nSupport service renewals by ensuring high-quality service and client engagement.\n\n4. Financial & Compliance Responsibilities\n\nMonitor area-specific budgets and control operational costs.\n\nSupport the Regional Service Manager in achieving area Gross Margin (%) and EBIT targets.\n\nEnsure adherence to regulatory, safety, and technical standards\n\n5. Onboarding & Service Contracts\n\nSupport onboarding of new clients in the area, ensuring smooth transition and initial service delivery.\n\nAssist in contract renewals, providing operational insight and supporting customer engagement.\n\n6. KPIs & Reporting\n\nTrack and report on area operational KPIs, including SLA compliance, engineer productivity, and customer satisfaction.\n\nProvide regular updates and insights to the Regional Service Manager.\n\n7. Engineers Overtime & Resource Management\n\nApprove local engineer overtime in line with operational needs and budget.\n\nAdjust staffing and resources dynamically to maintain operational continuity.\n\nKey Skills & Competencies\n\n * Strong operational and team management skills.\n\n * Excellent problem-solving and customer service abilities.\n\n * Knowledge of fire and security service operations and compliance standards.\n\n * Ability to make quick operational decisions and manage multiple priorities.\n\n * Effective communication and interpersonal skills.\n\nQualifications & Experience\n\n * Relevant technical or engineering qualification in fire, security, or related field.\n\n * Experience managing field service teams or multi-site operations.\n\n * Familiarity with service contracts, renewals, and client relationship management.\n\nKPIs / Performance Metrics\n\n * SLA compliance and response times\n\n * First-time fix rates\n\n * Engineer productivity and efficiency\n\n * Customer satisfaction within the area\n\n * Budget adherence and contribution to GM (%) & EBIT

Site Engineer – Civil Engineering & Groundworks We are currently representing a leading contractor in the civil engineering and groundworks sector, who are looking to appoint a Site Engineer to join their high-performing team on a major project based in Edinburgh. This is an excellent opportunity to work within a technically strong environment, supporting the successful delivery of complex infrastructure works. The role will suit an individual who thrives on precision, enjoys problem-solving, and is motivated to contribute to a collaborative site team. The Role As Site Engineer, you will play a key role in supporting the technical and operational delivery of the project. You will be responsible for interpreting engineering information, ensuring accurate setting out, and effectively communicating technical requirements to site teams to maintain programme and budget targets. You will also contribute to maintaining high standards across health & safety, quality, and sustainability, while supporting junior team members in their development. Key Responsibilities • Promote safe working practices and support project HSES objectives, • Mentor and support Graduate, Assistant, and Apprentice Engineers, • Collaborate with site teams to ensure smooth project delivery, • Interpret and communicate engineering drawings and specifications, • Produce mark-ups, sketches, and calculations to support site activities, • Raise RFIs and Technical Queries to resolve design discrepancies, • Ensure all engineering information used on-site is current and approved, • Carry out accurate setting out and dimensional control, • Maintain and verify survey control systems, • Produce as-built records in line with project requirements, • Manage and maintain survey equipment and calibration, • Support the delivery of the project Quality Plan, • Conduct site inspections and address minor quality issues, • Interpret specifications and work with Inspection Test Plans (ITPs), • Manage and close out Permits to Work, • Assist with material take-offs, requisitions, and usage tracking, • Support logistics planning and coordination, • Assist with inspections and ensure compliance with procedures, • Act as Temporary Works Inspector/Supervisor when required, • Identify potential variations and escalate appropriately, • Work in line with project programme and contractual requirements About You • HNC (or higher) in Civil Engineering, Construction Management, or Structural Engineering, • Proven experience in setting out and engineering delivery, ideally on concrete frame or similar projects, • Strong understanding of surveying techniques and equipment, with the ability to guide others, • Experience using CAD software for data transfer (EDM/survey equipment preferred), • Previous experience mentoring or supporting junior engineers, • Strong communication skills and attention to detail What’s on Offer • Competitive Salary, • Private Health Insurance, • Company Car / Car Allowance, • Opportunity to work on a major, high-profile project, • Supportive and collaborative team environment, • Career progression and professional development opportunities

COMPANY OVERVIEW\n\nOur client is a renowned nationwide leader in the construction and facilities management industry. Established in the early 1990's, they have grown significantly and secured multiple blue-chip contracts due to their outstanding reputation.\n\nThey are now seeking a skilled and motivated Commercial Gas Engineer to carry out mobile maintenance works to join our clients team in the Edinburgh / |Dunfermline / Livingston and the surrounding areas.\n\nJOB OVERVIEW\n\nThis role will involve servicing, maintaining, and troubleshooting combustion systems and mechanical equipment in a variety of mobile settings, ensuring they are operating at optimum efficiency and in compliance with health, safety, and environmental regulations. The successful candidate will possess a strong technical background in combustion engineering and mechanical systems, with the ability to work independently in a dynamic, mobile environment. Our client base is Managing agents of commercial office blocks & industrial units, Retail & Student Accommodation\n\nJOB RESPONSBILITIES\n\nCombustion System Maintenance & Troubleshooting:\nConduct regular service, maintenance, and repair of combustion and mechanical systems in various mobile units, including vehicles, engines, and industrial equipment.\nDiagnose and resolve issues related to combustion processes, fuel systems, and exhaust systems.\nPerform combustion optimization and efficiency tests, including emission monitoring and reduction strategies.\n\nMechanical System Maintenance:\nOversee the mechanical integrity of mobile systems, ensuring they are in peak operational condition.\nPerform mechanical repairs, replacements, and upgrades on engines, pumps, and other mechanical components.\n\nInstallation & Commissioning:\nInstall, test, and commission combustion and mechanical equipment for new or upgraded systems in mobile settings.\nEnsure proper calibration and setup of systems to meet performance specifications.\n\nSafety & Compliance:\nAdhere to all relevant safety regulations, standards, and codes of practice when working with combustion systems and mechanical equipment.\nRegularly inspect and monitor systems to ensure compliance with environmental, health, and safety regulations.\nKeep up to date with the latest combustion and mechanical engineering standards and best practices.\n\nDocumentation & Reporting:\nMaintain detailed records of all maintenance, repairs, inspections, and testing performed.\nProvide accurate and timely reports to management on system performance, maintenance schedules, and identified issues.\n\nClient Interaction:\nEngage with clients directly during service visits to discuss system performance, offer recommendations, and explain technical solutions.\nProvide excellent customer service and technical support to clients, ensuring satisfaction and building long-term relationships.\n\nContinuous Improvement:\nIdentify opportunities for improving combustion and mechanical systems to enhance efficiency, reduce costs, and meet environmental targets.\nStay informed of emerging technologies and industry trends, incorporating them into operational practices where appropriate\n\nSKILLS & QUALIFICATIONS\n\nEducation:\nACS Commercial Gas Qualifications (COCN1, CIGA1, CDGA1, CORT1, ICPN1A) – Essential\nGas Safe Registration – Essential\nFull Uk Driving Licence - Essential\n\nExperience:\nMinimum of 5 years of experience in a combustion or mechanical engineering role, previous experience working with a facilities management company is a plus.\nProven experience with the installation, maintenance, and troubleshooting of combustion systems (e.g., burners, boilers, gas fired water heaters etc).\nHands-on experience with mechanical/pressurised systems, including pumps, and associated mechanical components.\nPrevious experience working in the field or on-site (mobile or remote) is a plus.\n\nTechnical Skills:\nStrong knowledge of combustion processes, fuel systems, and emission control technologies.\nProficiency in diagnostic tools and techniques for combustion and mechanical systems.\nFamiliarity with modern mechanical engineering software and systems for diagnostics, analysis, and maintenance planning.\n\nSoft Skills:\nExcellent problem-solving skills and the ability to work independently and autonomously.\nStrong communication skills, with the ability to explain complex technical issues to non-technical clients.\nCustomer-focused with a commitment to providing high-quality service.\nExcellent time management and organizational skills to manage mobile workload efficiently.\n\nAdditional Requirements:\nFull UK driving license and willingness to travel regularly within London and surrounding areas.\nAbility to work in outdoor or remote locations and adapt to changing work environments.\nParticipate in an on-call rota to provide emergency response services outside of normal working hours.\nKnowledge of health and safety regulations and ability to work in compliance with legal and safety standards.\n\nSALARY & BENEFITS\n\n£42k - £45k (DOE)\nOn Call 1 in 8\n25 Days Holiday + Bank Holiday\nCompany vehicle\nFuel card.\nPension scheme.\nHealth and wellness benefits.\nOngoing training and professional development opportunities.\nOpportunities for career growth within the organization.\n\nPlease call Clare on (phone number removed) for more information and please apply to this advert to prompt a call back

Description\nWe have an exciting opportunity for you to join a highly skilled team delivering a project in the South West of Edinburgh.\n\nAs a Site Engineer, you will support the technical delivery of these RC frame and groundworks projects. You will have a flair for technical complexity and detail, with a core motivation to engage with, innovate and inspire the teams around you. As an integral part of the operations team, your role will be key to the successful delivery of this project.\n\nCareys Engineers, work as part of a team interpreting engineering information and conveying this to the workforce, to ensure delivery of the project to programme and budget. \nWhat you will be doing:\nHealth and Safety, Environment and Sustainability:\n\nBasic understanding of HSES regulations and good practice and ability to communicate to others\n\nParticipates in delivering project Health, Safety, Environmental and Sustainability targets\n\nProject and Team Management:\nMentors/coaches Graduate, Assistant and Apprentice Engineers \n Construction Methodology:\n\nKeeps a site diary, sharing this information with the site team and contributing to knowledge capture, share initiative\n\nAbility to access and interpret engineering information and effectively communicate with the site team, by way of mark-ups, sketches, calculations, or within their setting out of the works\n\nProvides feedback to the site team on the performance of all project elements, including materials, contractors and designs\n\nEngineering Information, Design Coordination, and process:\n\nAbility to interrogate design information, to determine if the information is suitable to be included in the works, and to write RFIs and TQs to resolve discrepancies within inadequate engineering information.\n\nEnsures that engineering information being used on site is current and of construction status, updating files as required\n\nSetting out, Dimensional Control:\n\nProvides dimensional control for an area of the works, ensuring that surveying instrumentation used is within calibration.\n\nProduces as built surveying compliance checks for an area of the works, ensuring the results are presented in a format suitable to be included in the project records.\n\nEstablishes and maintains control from primary control, carrying out checks to the control provided by others and communicating control information to the team\n\nAble to manage the survey equipment being used on the project\n\nQuality Management:\n\nAssists in delivery of Quality Plan and Assurance targets relevant to the project \n\nCarries out site quality inspections, resolving minor Quality issues as raised by Clients team or self and records on appropriate \n\nQuality Plan documentation and files for retrieval \n\nAble to interpret specification requirements, produce and work to ITPs\n\nProduces, maintains and closes out Permits to Work to the project requirements\n \nProcurement of materials and plant, logistics: \n\nProvides quantity information and carries out material call offs and requisitions, measurement of material usage/reconciliation \n\nAssists with logistics planning and scheduling Temporary Works:\n\nAssists the TWC with TW inspections by taking on duty of TW inspector/supervisor\n\n Checks and communicates that all TW within work area have been applied to the TW procedure Programme, Scope of Works, Commercial: - Commercially aware, and raises possible variations and changes with Senior or Commercial team members prior to construction - Works to site and contract program\n\nWhat you will bring:\n\nYou will possess a qualification in Civil Engineering, Construction Management or Structural Engineering to HNC level or above\n\nA track record of delivering setting out and engineering processes on concrete frame projects.\n\nAbility to use CAD software for data transfer to/from single person working kit EDM preferable\n\nHighly competent in surveying and setting out techniques and able to teach others.\n\nExperience in managing and mentoring Graduate and Apprentice engineers\n\nBenefits\n\n26 days holiday plus bank holidays\n\nPrivate Healthcare\n\nCar Allowance \n\nCompany Pension\n\nVolunteering Days - With Careys Foundation - or other organisations that are important to you\n\nHealth Care Cashplan\n\nCycle to work scheme\n\nCar Leasing Scheme\n\nDiscounted Gym Membership\n\nLife Assurance\n\nBuy/sell holidays\n\nOther discounts and Cashback plans

We are working with a well-established and forward-thinking construction specialist to assist them in hiring a Sub-Agent for their growing team in the East of Scotland. This is an excellent opportunity to join a business with a strong project pipeline and a reputation for delivering high-quality infrastructure and civil engineering works. If you are looking to take the next step in your career with increased responsibility and long-term progression, we would be keen to hear from you.\n\nAs the Sub-Agent your responsibilities will include but are not limited to:\n\n* Supporting the delivery of civil engineering projects from planning through to completion\n* Assisting with the management of site teams, subcontractors, and resources\n* Ensuring works are carried out safely, on time, and within budget\n* Contributing to programme planning and progress reporting\n* Monitoring quality standards and ensuring compliance with specifications\n* Assisting with commercial aspects including cost control and variations\n\nThe successful applicant will be able to demonstrate:\n\n* Previous experience in a Sub-Agent or Section Engineer role within civil engineering\n* Strong understanding of construction processes and health & safety regulations\n* Excellent communication and organisational skills\n* Ability to work effectively as part of a team and support senior management\n* Relevant engineering qualification (HNC/HND/Degree or equivalent)\n\nWhat's in it for you?\n\n* Competitive salary and benefits package\n* Opportunity to work on high-profile infrastructure projects\n* Clear career progression within a supportive and dynamic environment\n\nIf you would like more information or to apply, please feel free to contact Jamie Nicholson using the details provided, or alternatively please click the "apply now" link in confidence.\n\nSearch is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Company One of the countries' largest, most successful and award-winning multidisciplinary engineering consultancies. They have multiple offices across the UK and have a solid reputation for successful project delivery throughout numerous sectors within the Built Environment. Projects can vary from small works to 100m+ across Education, Heritage, High-End Residential, Cultural, Laboratories and more. They have a very modern, open-plan office space, you will get exposure to designing a wide range of electrical systems across multiple jobs and there is an excellent support system in place for staff training and development. They are currently seeking an Electrical or Senior Design Engineer at join their Edinburgh office. Role • Ensuring an understanding of project briefs. Design and specification of all Electrical Building Services systems ., • Design and specification of all Electrical Building Services systems - power, earthing, lighting, life safety, telecoms, security, access control, lifts, lightning protection etc., • Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, dialux, Amtech, in-house developed tools, etc., • Representing the organisation at meetings with clients and contractors., • Site surveys, inspections and monitoring of site works., • Report and technical note writing., • Maintaining complete records and archives to company standards., • Degree or HND/HNC in Electrical Engineering, Building Services Engineering, or a related discipline, • Proven experience in electrical design within a building services consultancy or contractor environment, • Strong knowledge of UK building regulations and standards, including BS 7671 (IET Wiring Regulations), • Experience producing detailed electrical design calculations and drawings (lighting, power, small power, containment, earthing, fire alarm, data, etc.), • Good written and verbal communication skills, • 33 days holiday including publics, • Holiday buy/sell, • 5% pension, • 1 Paid professional membership per year, • Cycle to work Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.

Fire & Security Engineer \n £38,000 - £43,000 OTE + Full Benefits Package\n\nWhat's on Offer\n\nOTE up to £43,000\nRegional coverage across Edinburgh\n22 days holiday + bank holidays\nCompany vehicle \nEmployee referral bonus scheme\nTools, PPE, uniform and ongoing training provided\nHealth & wellbeing support\nEmployee recognition programme\n\nThe Role\n\nService, maintain and install fire alarms, CCTV, intruder alarms and access control systems\nDeliver a high standard of customer service and build strong client relationships\nManage your own workload across a regional patch\nDiagnose faults and carry out effective repairs\nComplete accurate service and compliance reports\nIdentify system issues and recommend improvements\nWork to deadlines while maintaining quality standards\nEnsure full compliance with health & safety regulations\nCollaborate with internal teams to deliver efficient service\nAim for first-time fixes wherever possible\n\nWhat We're Looking For\n\nExperience across both fire and security systems\nRelevant industry qualifications (FIA or equivalent advantageous)\nStrong fault-finding ability\nComfortable with digital reporting systems\nSolid understanding of health & safety practices\nGood communication and customer-facing skills\nSelf-motivated and organised approach\nFull UK driving licence\n\nJoin a well-established and growing organisation delivering high-quality fire and security solutions across Edinburgh. This is a field-based role centred around Edinburgh, covering a regional patch, offering stability, strong earning potential, and a genuinely supportive environment.\n\nINDAV

ABOUT YOU Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. As the Certification Engineer, you will have strong analytical skills, enabling you to review technical documentation, make sound engineering judgements, and support certification decisions. Organised and detail-oriented, you can manage multiple projects while collaborating effectively with colleagues and clients. Required skills and experience: • Degree in electrical engineering or equivalent in terms of education, experience, or training., • Experience in testing and/or certification of electrical products., • Experience with switchgear and control gear products and standards (IEC 61439 series)., • Ability to make sound engineering judgements based on relevant professional experience., • Ability to scrutinise and compare technical documents., • Good IT literacy skills (Microsoft Office). ABOUT THE OPPORTUNITY As the Certification Engineer you will help coordinate the company's product certification activities and take an active role in the product certification process for our ASTA certification schemes. Key activities: • Conducting certification activities (Recommendation and Certification Decision) for all schemes., • Preparation, review and authorisation of test programmes., • Creation and checking of certificates and technical reports., • Assessment of laboratories to ISO 17025 and Intertek Requirements., • Witnessing of testing activities undertaken as part of the ASTA schemes., • Processing and management of enquiries, quotations and orders for type testing and certification., • Regular monitoring of project status including discussions with colleagues in other offices., • Supporting of sales teams to progress the technical aspects of the sales process., • Liaising with clients, including the development of professional relationships and providing technical support., • Undertaking project work primarily for products within the IEC 61439 series of standards. WHAT WE OFFER Join Intertek and become part of our global network of inspiring and entrepreneurial colleagues. We are a global family that values diversity and we thrive working together with precision, pace, and passion. We are working to make the world Ever Better, ensuring the quality, safety and sustainability of products and services used by millions of people around the world. • Competitive salary/benefits, • Development and career opportunities around the Globe, • Working in a highly motivated team and dynamic working environment We are an Equal Opportunity Employer who do not discriminate against applicants. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex or national origin. xrnqpay Intertek operates a preferred supplier arrangement, and we do not accept unsolicited approaches from agencies.

Quality Assurance Engineer shall provide Quality System Design Control mentoring to ensure product design teams use of critical thinking. Were seeking a Senior Quality Assurance Engineer to lead and support Quality Management System (QMS) performance across design, manufacturing, service, and compli

We are looking for a Forklift Service Engineer (Service Technician) to work within our After Sales department to maintain, repair, service and modify the companies range of products. This role comes with a competitive salary, an attractive company pension, a company vehicle, and the opportunity to work for great company. Is your CV ready If so, and you are confident this is the role for you, make sure to apply asap. About the role The role involves servicing, maintaining, and repairing forklift trucks and other material handling equipment. On a day-to-day basis this is what you would be doing: • Service, maintain, overhaul, fault find and resolve faults on company products., • Respond to breakdowns, • Provide local after sales support to customers., • To deal promptly with customer enquiries, problems, or complaints., • To keep control of vehicle stock/deliveries., • Experience in mechanical engineering., • Basic electrical knowledge would be beneficial., • Effective planning and organisational skills., • Able to work on your own initiative., • Excellent communication skills., • Build good rapport with customers., • Competitive salary, • Attractive company pension, • Company vehicle, • Fuel card, • Full tool kit, • Company sick pay, • Voluntary critical illness cover, • Free eye tests, • Free flu jabs, • 24/7 Employee Assistance Programme Toyota Material Handling is the world's number one manufacturer of materials handling equipment providing quality sales and service support across the UK. We foster a culture where our team members are encouraged to continually improve their processes and strive to provide the highest quality in service for our customers. We aim to create a safe environment where our team members feel valued, fulfilled, engaged and happy. We want to attract the best talent and develop our team so that they achieve their full potential. Our commitment is to read each application carefully, however due to the high volume of applications we receive regrettably only those selected for an interview will be contacted. xrnqpay Toyota Material Handling UK is an equal opportunities employer.

AV Installation Engineer Qualifications, skills, and all relevant experience needed for this role can be found in the full description below. Location South of England (field-based role requiring travel across South East & South West regions) Salary Package Competitive salary plus large company benefits, a broad flexible benefits scheme, and two paid volunteering days per year Working Hours 9.00 am - 5.30 pm, Monday - Friday Overview Our client is looking for an Installation Engineer to join a well-established and growing organisation delivering high-quality audio-visual solutions. This is a great opportunity to secure long-term career stability and progression within a respected business that invests in its people, training, and development. We are proud to be supporting our client with this opportunity. This is a field-based role covering client sites across the South of England, including both the South East and South West, depending on project requirements. Role Purpose The Audio-Visual Installation Engineer is responsible for the installation of audio-visual systems across customer environments. This role requires hands-on installation experience, strong attention to detail, and the ability to work effectively with internal teams and subcontractors to deliver high-quality AV solutions. Key Responsibilities Install a variety of AV equipment including projectors, screens, speakers, microphones, video conferencing systems, and control systems Ensure all equipment is installed in line with manufacturer specifications and internal quality standards Read and work from elevation drawings, schematic diagrams, and blueprints Adhere to all health and safety protocols during installations Ensure compliance with company policies and procedures Maintain company vehicle checks and servicing requirements Ensure personal xrnqpay PPE and tools are safe, maintained, and replaced where required Work collaboratively with colleagues and subcontractors on site Participate in training programmes and ongoing professional development Skills and Experience Proven experience in AV installations Ability to interpret and work from technical drawings and schematics Basic fault-finding and problem-solving skills Strong communication and interpersonal skills Ability to work independently and as part of a team Full UK driving licence and willingness to travel extensively across the South of England

COMPANY OVERVIEW Be one of the first applicants, read the complete overview of the role below, then send your application for consideration. Our client is a renowned nationwide leader in the construction and facilities management industry. Established in the early 1990's, they have grown significantly and secured multiple blue-chip contracts due to their outstanding reputation. They are now seeking a skilled and motivated Commercial Gas Engineer to carry out mobile maintenance works to join our clients team in the Edinburgh / |Dunfermline / Livingston and the surrounding areas. JOB OVERVIEW This role will involve servicing, maintaining, and troubleshooting combustion systems and mechanical equipment in a variety of mobile settings, ensuring they are operating at optimum efficiency and in compliance with health, safety, and environmental regulations. The successful candidate will possess a strong technical background in combustion engineering and mechanical systems, with the ability to work independently in a dynamic, mobile environment. Our client base is Managing agents of commercial office blocks & industrial units, Retail & Student Accommodation JOB RESPONSBILITIES Combustion System Maintenance & Troubleshooting: Conduct regular service, maintenance, and repair of combustion and mechanical systems in various mobile units, including vehicles, engines, and industrial equipment. Diagnose and resolve issues related to combustion processes, fuel systems, and exhaust systems. Perform combustion optimization and efficiency tests, including emission monitoring and reduction strategies. Mechanical System Maintenance: Oversee the mechanical integrity of mobile systems, ensuring they are in peak operational condition. Perform mechanical repairs, replacements, and upgrades on engines, pumps, and other mechanical components. Installation & Commissioning: Install, test, and commission combustion and mechanical equipment for new or upgraded systems in mobile settings. Ensure proper calibration and setup of systems to meet performance specifications. Safety & Compliance: Adhere to all relevant safety regulations, standards, and codes of practice when working with combustion systems and mechanical equipment. Regularly inspect and monitor systems to ensure compliance with environmental, health, and safety regulations. Keep up to date with the latest combustion and mechanical engineering standards and best practices. Documentation & Reporting: Maintain detailed records of all maintenance, repairs, inspections, and testing performed. Provide accurate and timely reports to management on system performance, maintenance schedules, and identified issues. Client Interaction: Engage with clients directly during service visits to discuss system performance, offer recommendations, and explain technical solutions. Provide excellent customer service and technical support to clients, ensuring satisfaction and building long-term relationships. Continuous Improvement: Identify opportunities for improving combustion and mechanical systems to enhance efficiency, reduce costs, and meet environmental targets. Stay informed of emerging technologies and industry trends, incorporating them into operational practices where appropriate SKILLS & QUALIFICATIONS Education: ACS Commercial Gas Qualifications (COCN1, CIGA1, CDGA1, CORT1, ICPN1A) – Essential Gas Safe Registration – Essential Full Uk Driving Licence - Essential Experience: Minimum of 5 years of experience in a combustion or mechanical engineering role, previous experience working with a facilities management company is a plus. Proven experience with the installation, maintenance, and troubleshooting of combustion systems (e.g., burners, boilers, gas fired water heaters etc). Hands-on experience with mechanical/pressurised systems, including pumps, and associated mechanical components. Previous experience working in the field or on-site (mobile or remote) is a plus. Technical Skills: Strong knowledge of combustion processes, fuel systems, and emission control technologies. Proficiency in diagnostic tools and techniques for combustion and mechanical systems. Familiarity with modern mechanical engineering software and systems for diagnostics, analysis, and maintenance planning. Soft Skills: Excellent problem-solving skills and the ability to work independently and autonomously. Strong communication skills, with the ability to explain complex technical issues to non-technical clients. Customer-focused with a commitment to providing high-quality service. Excellent time management and organizational skills to manage mobile workload efficiently. Additional Requirements: Full UK driving license and willingness to travel regularly within London and surrounding areas. Ability to work in outdoor or remote locations and adapt to changing work environments. Participate in an on-call rota to provide emergency response services outside of normal working hours. Knowledge of health and safety regulations and ability to work in compliance with legal and safety standards. SALARY & BENEFITS £42k - £45k (DOE) On Call 1 in 8 25 Days Holiday + Bank Holiday Company vehicle Fuel card. Pension scheme. Health and wellness benefits. Ongoing training and professional development opportunities. xrnqpay Opportunities for career growth within the organization. Please call Clare on (phone number removed) for more information and please apply to this advert to prompt a call back

Job Title:Fire & Security Service Engineer Ready to make your application Please do read through the description at least once before clicking on Apply. Location:Edinburgh Job Type:Full-Time, Permanent Schedule:Monday to Friday (plus call-out rota as required) Job Purpose We are looking for a skilled and reliableFire & Security Service Engineerto join our growing Fire & Security Service teams. In this role, you will be responsible for delivering Planned Preventative Maintenance (PPM), Reactive Maintenance, and emergency support across a range of Fire & Security Systems. You will play a key role in ensuring compliance, safety, and system reliability across customer sites. Key Responsibilities • Carry out routine PPM in line with scheduled tasks and industry standards., • Respond effectively to reactive maintenance calls, breakdowns, and emergency situations., • Perform fault diagnosis and repairs on a range of fire alarm, CCTV (IP & analogue), access control, and intruder alarm systems., • Ensure compliance with all relevant Health and Safety legislation and company procedures., • Complete detailed and accurate job documentation, reports, and asset records., • Coordinate with subcontractors and suppliers for specialist system support and installations., • Support and liaise with clients, ensuring a high level of customer satisfaction., • Take part in an on-call rota for emergency response, as required., • Identify opportunities for system upgrades, replacements, or improvements., • Assist other trade teams on-site when required. Internal: • Engineering Coordinators, • Clients and client representatives Essential: • Recognised Fire & Security Apprenticeship or equivalent experience, • Health & Safety training (e.g. Manual Handling, Working at Height), • Strong experience in fire alarm systems with supporting certifications, • IP and analogue CCTV system experience, • Current ECS card with Chapter 8 awareness, • IPAF trained, • Minimum of GCSEs (or equivalent) in Maths and English, • City & Guilds 2360 Part 3 or equivalent qualification, • Experience with IT and networking related to security systems, • Teamwork:Works collaboratively to achieve shared goals, • Communication:Clear, professional, and effective with all stakeholders, • Planning & Organisation:Manages time, tasks, and priorities efficiently, • Commercial Awareness:Understands the impact of costs and efficiencies, • Risk Awareness:Identifies and mitigates operational risks, • Customer Focus:Delivers excellent service and builds positive relationships, • Adaptability:Responds positively to change and challenge, • Self-Motivation:Demonstrates initiative and a proactive approach All staff are required to take reasonable care for the health and safety of themselves and others, and to comply with all company health and safety policies and procedures. Diversity, Equity & Inclusion at Dalkia At Dalkia, we are committed to building a diverse and inclusive workforce that reflects the communities we serve. We value every individual and provide a supportive and respectful environment that promotes equality of opportunity. We welcome applications from all backgrounds, and we are proud to be an equal opportunity employer. Together, we aim to foster a workplace where everyone feels empowered to thrive and contribute their best. xrnqpay Apply nowto join a dedicated and forward-thinking engineering team focused on safety, reliability, and service excellence in fire and security systems.

Energy Jobline ZR is looking for a Process Engineer specialized in injection molding in Edinburgh, Scotland. The role involves designing and implementing manufacturing processes while supporting continuous improvement, quality control, and employee development.

Principal High-Speed Digital Hardware Engineer Certain Advantage is hiring for a Principal Digital Hardware Engineer based in the Edinburgh area. This role is on a contract basis and is hybrid-based. The Company We’re working with an engineering company specialising in solving complex engineering challenges across various industries—from aerospace and automotive to healthcare and semiconductors. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a Principal Digital Hardware Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Creating high-quality and robust digital electronics designs Documenting and recording deliverables Supporting integration & verification activities at the hardware and system level Keeping designs under configuration control Providing progress reportsThe Individual We’re looking for people who can show: High-speed serial communication interfaces/ protocols (e.g. PCIe, Ethernet/ IEEE802.3, SPI, I2C, etc.) and high-speed bus architectures (e.g. DDR3/4) Use of high-speed digital design techniques such as signal termination, controlled impedance, matched length tracking, ground/ power planes, decoupling, etc. Integrating hardware, firmware & software on FPGA and microprocessor-based PCAs Signal integrity & power integrity analysis at board level using Hyperlynx SI/PIThe Benefits: Competitive hourly rate Training and Development Career progressionDoes this sound like your next career move? Apply today. Working with Certain Advantage We go the extra mile to find the best people for the job. If you’re hunting for a role where you can make an impact and grow your career, we’ll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn’t for you, head to (url removed) and register for job alerts and career guidance tips

Site Engineer - Concrete Repairs (QA Focus) Locations: Queensferry & Livingston Rate: £300 per day (CIS) Duration: 6-12 months (with potential extension) We are currently seeking an experienced Site Engineer to join a leading contractor delivering two major concrete repair schemes across Queensferry and Livingston. This is a fantastic opportunity for a detail-oriented engineer who excels in quality assurance and reporting, rather than traditional setting out duties. The Role This position is heavily focused on QA, compliance, and technical reporting. You will play a key role in ensuring all repair works meet required specifications and standards across both sites. Key responsibilities include: Managing and overseeing quality assurance processes on concrete repair works Producing detailed as-built records and reports Accurately measuring and recording: Concrete depths and repairs Rebar installation and positioning Associated structural elements Ensuring works are carried out in accordance with design specifications and industry standards Liaising with site teams, subcontractors, and management to maintain high-quality delivery Maintaining comprehensive documentation and QA records for project handover What We're Looking For Proven experience working as a Site Engineer on concrete repair or structural projects Strong background in QA, inspections, and as-built reporting Ability to demonstrate previous experience with measurement and documentation of concrete and rebar works High attention to detail and a proactive approach to quality control Strong communication and organisational skills Relevant engineering qualification (HNC/HND/Degree or equivalent preferred) Note: This role does not involve setting out - the focus is entirely on QA and reporting. What's on Offer Competitive rate of £300 per day (CIS) Long-term opportunity (6-12 months) with potential for extension Work on high-profile, technically interesting repair schemes Supportive project environment with a strong emphasis on quality delivery

At Spacelabs Healthcare, were committed to transforming healthcare through continuous innovation. Our scalable solutions deliver critical patient data across local and remote systems, enabling clinicians to act with confidence and improving outcomes for patients worldwide. We are seeking a Senior Quality Assurance Engineer who will play a pivotal role in ensuring our medical devices are safe, effective, and compliant. This individual will lead Design Controls, Risk Management, and Quality Management System (QMS) governance throughout the product lifecycleprimarily focusing on design and pre-market activities. Acting as a trusted partner to R&D and Regulatory Affairs, you will help drive informed decision-making that safeguards patients while enabling compliant innovation. Key Responsibilities Design & Development Quality Leadership Champion critical thinking across product development teams throughout all stages of design and development. Serve as a subject-matter expert in Design Controls , Risk Management , Electrical Safety , and Usability Engineering . Ensure all design activities are properly executed, accurately documented, and compliant with internal procedures and global regulatory requirements. Review Engineering Change Orders (ECOs) and design changes to confirm sound engineering practice and maintained device safety and effectiveness. Oversee efficient progression of design changes with complete, traceable, and compliant documentation. Participate in cross-functional design reviews, assessing design plans, inputs, outputs, V&V evidence, and change records. Identify potential safety or performance concerns and support appropriate risk management activities. Ensure design decisions are fully justified, documented, and aligned with regulatory expectations. Risk Management Contribute to risk management activities in accordance with ISO 14971 . Support hazard analyses, FMEAs, and related risk management documentation. Ensure risk control measures are implemented, verified, and supported by objective evidence. Provide structured, risk-based decision-making to support product safety and compliance. Ensure riskbenefit evaluations are complete, clear, and aligned with global regulatory expectations. Material Review Board (Design-Related) While the role does not oversee manufacturing or service activities, you will: Participate in design-related reviews of nonconforming materials and investigations where they impact design decisions, safety, or documentation. Communicate trends or recurring issues to design teams. Support corrective actions or design improvements based on nonconformance insights. QMS Administration Conduct internal quality audits to verify compliance with procedures and regulatory expectations. Lead or support CAPA activities, ensuring effective verification and complete documentation. Manage process change control for design-related processes, ensuring proper evaluation, documentation, and approval. Support external audits/inspections by representing design-related quality processes. Educate internal teams on quality obligations and alignment with the Spacelabs Quality Policy. Maintain and improve QMS procedures, work instructions, and templates. Qualifications Bachelors degree in Quality, Engineering, or related fields (e.g. Biomedical, Mechanical, Electrical). 7+ years of relevant Quality or Engineering experience. 5+ years working with medical device regulatory requirements, quality standards, and QMS. Experience maintaining Technical Files, GSRPCs, Risk Management Files, Usability Files, Design History Files, MVPs, and Change Control documentation. Experience with statistical analysis. Knowledge of Software as a Medical Device (SaMD) or software within medical devices. Experience collaborating with teams under design controls during new product development. Strong communication skills across all levels of an organization. Highly self-motivated, organized, and proactive. TPBN1_UKTJ