Trabajos scientific en GlasgowCrear alertas

Electrical Reliability Engineer Are you experienced in electrical maintenance and looking to advance your career in reliability engineering? We’re seeking an Electrical Reliability Engineer to play a key role in ensuring the reliability and efficiency of electrical systems within a regulated manufacturing environment. In this position, you’ll be responsible for assessing equipment reliability and identifying areas for improvement. You’ll conduct root cause analyses, facilitate inspections, and optimise maintenance practices while working closely with the maintenance team to develop and implement electrical maintenance programmes. Responsibilities • Design and perform critical electrical equipment inspections to ensure reliability., • Analyse and document electrical equipment failures and establish repair alternatives., • Implement risk-based decision-making processes to prioritise maintenance activities., • Develop and enhance preventive maintenance programmes focused on electrical components and systems., • Collaborate with the Maintenance Planner to ensure alignment with CMMS systems., • Provide training and mentorship to team members on electrical reliability practices., • Prepare reports detailing findings, recommendations, and project status., • Assist in budgeting and CAPEX planning related to electrical reliability initiatives., • Coordinate with other departments to drive improvements in inspection and maintenance processes. Requirements • Minimum of five years’ experience in electrical maintenance / reliability engineering within a manufacturing environment is essential., • University level education in Electrical Engineering or a related field is essential., • Strong understanding of Reliability Centred Maintenance (RCM), • Proficient in conducting Root Cause Analysis (RCA) and fault diagnosis., • Familiarity with electrical systems, PLCs, and control circuits. STEM Recruitment Solutions Ltd operates as both a Recruitment Agency and a Recruitment Business. We endeavour to reply to all applications when possible, however on occasions this may not be possible due to volumes of responses. STEM Recruitment is a Scientific, Engineering and Manufacturing Recruitment business supplying talented staff to permanent and temporary opportunities.

We are seeking an Test Engineer - Electrical to join our electrical equipment manufacturing client based in Glasgow. The successful candidate will be responsible for testing and inspecting electrical power systems, ensuring compliance with industry standards. Duties • Performing a variety of electrical testing methods - Flash testing, Ductor testing, VFD testing and more., • Complete QA documentation, • Keep track of test documentation, • Carry out final acceptance tests for customers, • Experience in electrical testing, • Experience working with medium voltage / low voltage switchboards, • Experience working with motor control centres In addition to a competitive salary this role offers the benefit of a 4 day week and the opportunity to develop your career within a leading electrical equipment manufacturer. Join a team dedicated to delivering bespoke electrical solutions and grow your expertise in a supportive environment. STEM Recruitment Solutions Ltd operates as both a Recruitment Agency and a Recruitment Business. We endeavour to reply to all applications when possible, however on occasions this may not be possible due to volumes of responses. STEM Recruitment is a Scientific, Engineering and Manufacturing Recruitment business supplying talented staff to permanent and temporary opportunities.

Our client is seeking a skilled and reliable Maintenance Electrician to join their team in a busy manufacturing environment. This role is vital for ensuring the continuous operation and safety of heavy-duty machinery through proactive maintenance and rapid troubleshooting. The ideal candidate is a time-served Electrical Engineer who is comfortable working independently, particularly during night shifts where they will serve as the primary responder for plant issues. Key Responsibilities • Perform troubleshooting, repairs, and preventative maintenance on motors, transformers, switchgear, breakers, and lighting systems, • Execute plant isolations and issue permits when authorised, • Conduct regular equipment inspections, calibrations, and data collection to identify potential failures early, • Adhere strictly to all safety systems and policies, including risk assessments and the permit-to-work system, • Support root cause analysis for plant issues and contribute to long-term corrective actions, • Use CMMS to generate work requests and maintain accurate equipment histories, • Electrical qualification, • Time-served Electrical Engineer / Electrician, • Minimum of 5–6 years of experience in a manufacturing environment involving heavy-duty machinery, • Knowledge of HV/LV systems, motor control circuits, automation, and instrumentation., • Proven ability to work independently, specifically to handle the demands of a night shift rotation., • Strong troubleshooting abilities and the capacity to interpret complex electrical and process control drawings.

STEM Recruitment Solutions is searching for a Facilities Engineer to join our client based in Glasgow. This role is a temporary position for 12 months. In this role you will play a pivotal role in maintaining our client’s facility and ensuring optimal operational efficiency through planned and reactive maintenance as and when required. There is scope for this role to become a permanent position within the company. As a Facilities Engineer, you will be required to: • Fault find and repair building services and equipment – this can be anything from equipment in the production area, to faulty plumbing or groundskeeping, • Carry out planned preventative maintenance (PPM) schedules, • Handle maintenance requests as and when they come in through the work order systems – document these tasks accurately on the system, • Complete risk assessments prior to any maintenance in adherence to Health and Safety procedures, • Work with other departments to plan and schedule maintenance activities to minimise effect on operations, • Support continuous improvement initiatives across the department and site, • Perform daily plant and utility checks Qualifications and Experience • Engineering qualification (apprenticeship, HNC/HND, or degree) in a relevant discipline, • Open to junior or graduate-level candidates with limited hands-on experience, provided they have a strong engineering education background, • Willingness to learn, • Exposure to maintenance systems, facilities, or process equipment would be beneficial but not essential Shift Pattern: • Monday – Friday, • 08:00am – 16:00pm Salary: • Starting from £17.00 per hour depending on experience STEM Recruitment Solutions Ltd operates as both a Recruitment Agency and a Recruitment Business. We endeavour to reply to all applications when possible, however on occasions this may not be possible due to volumes of responses. STEM Recruitment is a Scientific, Engineering and Manufacturing Recruitment business supplying talented staff to permanent and temporary opportunities.

Our client is an innovative and rapidly growing organisation operating at the intersection of biology, automation, and data science, focused on advancing large-scale proteomics to generate actionable biological insights. To support the growth of their high-performance team, we’re seeking an LC-MS Proteomics Scientist to join their operations in Glasgow. In this position, you will play a key operational role in ensuring smooth day-to-day running of the proteomics laboratory. You will maintain instrument performance, perform Proteomics methods, and help drive efficiency through automation and optimisation. Key responsibilities include: • Execute and support proteomics experiments focused on biomarker discovery and validation, • Develop and optimise LC-MS/MS workflows using advanced techniques (DIA / PRM), • Maintain and troubleshoot Thermo Orbitrap Mass Spectrometry systems, • Integrate automation and liquid handling to improve throughput, • Collaborate closely with scientists, chemists and data teams to support project delivery, • Contribute to technical documentation, reporting and scientific outputs Key Requirements: • BSc, MSc or PhD in Analytical Chemistry, Biochemistry, Molecular Biology or related discipline, • Minimum 3 years’ experience using LC-MS/MS in Proteomics, • Hands-on expertise with Thermo Orbitrap / Tribrid systems, • Strong troubleshooting and maintenance experience for MS instrumentation, • Experience running complete proteomic workflows from sample preparation through data acquisition, • Excellent organisational skills and ability to manage multiple priorities This is a unique opportunity to join an innovative startup at a time of growth. For your work you will be rewarded with a highly competitive salary and opportunities to progress in the company. Apply today to learn more about this exciting position! Keywords: Mass Spectrometry, Chromatography, Analyst, Analytical, Technician, Proteomics, LC-MS, LC-MS/MS, Orbitrap, Thermo Tribrid, Biomarker Discovery, DIA, PRM, Proteome Discoverer, Skyline, FragPipe, Biofluid Proteomics, Automation, Liquid Handling, Protein Analysis, High-Throughput Proteomics, Biomarkers, Instrument Troubleshooting, Glasgow, Scotland, VRS9364PC

Refrigeration Supervisor Glasgow/Edinburgh £58,543.44 (salary including on call standby 1:4) Permanent My client is on the lookout for an experienced Refrigeration Supervisor to join the team. You will have the opportunity to work on one of their leading supermarket contracts. The Refrigeration supervisor is crucial to the delivery of PPM, reactive and testing workstreams whilst supporting with technical assistance to all maintenance teams across the estate. This role will require you to manage, supervise, influence and build strong working relationships with the customer, internal teams and regional Refrigeration engineers. Key Responsibilities – Refrigeration Supervisor • The role is responsible for effectively planning and leading refrigeration teams to ensure all services are completed to the agreed standard and comply with all regulatory and company standards., • This role is also responsible for overseeing all technical standards within the operation. You will be the technical expert and key account holder for FGas ensuring maintenance of our obligations to ensure our ongoing membership, in addition you will support and guide engineers through any training., • Managing a team of 8-12 engineers Qualifications & Experience – Refrigeration Supervisor • Educated to GCSE / Standard Grade level as a minimum, ideally NVQ Level 3/City and guilds 2078/2079., • Ability to maintain and repair a range of refrigeration equipment, • A working knowledge of the maintenance service within the FM industry is essential, with previous working knowledge of a multi-client contracted environment being desirable; and PPM and compliance background., • Previous experience of effectively leading and supervising a team is essential., • Previous experience of developing client relationships would be advantageous., • Strong PC literacy, with experience in extracting, collating and presenting performance data along with a good understanding of the CAFM. On Offer – Refrigeration Supervisor • £58,543.44, • 40 hour week – Monday to Friday (flexibility required 24/7), • Company pension scheme (matched up to 5%), • Private healthcare (BUPA), • Company Van, tools and uniform, • Various employee discount schemes For more information on this role, please contact Harry Waller on 01453 829778 or send a copy of your CV to Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. For details of other opportunities available within your chosen field please visit our website

Welders, must have experience in the Flux-Core process and be familiar with the use of ceramic backing tiles. previous experince in a ship building / repair environment would be an advantage. Only applicants with a full right to work in the UK will be accepeted for this role and no visa sponsorship will be available Dayshift 0700 1630 (Mon-Thurs) Standard 36 - PAYE rate 20.10 + holiday pay / Umbrella 26.90 Weekday & Sat Overtime - PAYE 30.15 + holiday pay / Umbrella 38.40 Sunday - PAYE 40.20 + holiday pay /Umbrella 50.98 Backshift 1400 23.30 & Nightshift 20.30 0600 (Mon-Thurs) Standard 36 - PAYE rate 26.73 + holiday pay / Umbrella 35.67 Weekday & Sat Overtime - PAYE 30.15 + holiday pay / Umbrella 38.40 Sunday - PAYE 40.20 + holiday pay /Umbrella 50.98 Radius allowance of 8.00 per hour on standard 36 for candidates 39 miles+ Ability to satisfy Baseline Security clearance and Disclosure Scotland are mandatory for this key role. Peopleare our businessworldwide Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.

Electricians Location Scotstoun, Glasgow 6 months + contract Highly competitive rates (Standard 36 + overtime) Our client, a highly successful and prestigious Marine Engineering Business is seeking to source Electricians for a large Naval Project Candidate Requirements: Trade Papers (SVQ, NVQ, National Certificate, Modern Apprenticeship, SJIB/Gold card) are required and trade tests are done on first day followed by H&S inductions. Comfortable at working at height/confined space Clear understanding of SHE Induction, COSHH risks awareness and manufacturing processes Candidates with large scale industrial or construction experience will be considered Core responsibilities: Primary working on installation of Cabling and fitting of systems such as Junction Boxes, Fuse panels, etc Cable weaving, glanding (making watertight) and termination Installation of all types of cables (multi-core, single core, co - axle, and fibre optic) & electrical systems (junction boxes, fuse panels, consoles, transformers, switches etc.) cable reeving, cable banding and cable terminations and alignment and installation of all electrical equipment. Using a range of hand tools Dayshift 0700 1630 (Mon-Thurs) Standard 36 - PAYE rate 20.10 + holiday pay / Umbrella 26.90 Weekday & Sat Overtime - PAYE 30.15 + holiday pay / Umbrella 38.40 Sunday - PAYE 40.20 + holiday pay /Umbrella 50.98 Backshift 1400 23.30 & Nightshift 20.30 0600 (Mon-Thurs) Standard 36 - PAYE rate 26.73 + holiday pay / Umbrella 35.67 Weekday & Sat Overtime - PAYE 30.15 + holiday pay / Umbrella 38.40 Sunday - PAYE 40.20 + holiday pay /Umbrella 50.98 Radius allowance of 8.00 per hour on standard 36 for candidates 39 miles+ Ability to satisfy Baseline Security clearance and Disclosure Scotland are mandatory for this key role. Peopleare our businessworldwide Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.

Marking - off materials. Assembling of ships structures, shell, decks, bulkheads, frames, & Longditudinals. Fit and fair steelwork using fairing aids Fabrication of ship items - seats, ladders, false flooring & panels etc. Outfitting Ships items, fitting of hatches, watertight doors, equipment seats & false flooring Forming Material using machine tools Rolling, Flanging & Cutting Machines (guillotine, cropper & mechanical saw) Preparing ship for launch & ship sea trials, manufacture of launch slipway, shores, batons etc. Ship Docking, plate perpetration, using different methods (Oxy fuel gas cutting & Hand Grinding), pressure testing, drilling & lock fitting Understanding of fabrication and installation drawings Understanding of manufacturing processes Clear understanding of SHE risk awareness Good knowledge of their specific trade Understanding of quality standards and work tolerances within the company Understanding of SHE risk awareness Hand skills required for assembly and fabrication purposes Coaching abilities, i.e. passing on knowledge to apprentices Good verbal communication skills Practical problem solving Safety certification i.e. SHE induction, COSHH awareness, working at height etc. Trade papers Peopleare our businessworldwide Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.

If you are a Consultant Endocrinologist looking to introduce greater variety and flexibility into your working week — within a structure that can complement your existing professional commitments — this opportunity offers a high-impact way to apply your expertise within an innovative digital care model. Zest Scientific is partnering with a rapidly expanding, award-winning digital healthcare provider delivering specialist weight management services across the UK and Europe. This organisation is redesigning treatment pathways for obesity and metabolic disease within established healthcare systems — improving access, outcomes and long-term patient engagement. Why This Consultant Endocrinologist Role Is Different This is a senior Consultant Endocrinologist position within an established, multidisciplinary digital service — not a high-volume telemedicine post. As a Consultant Endocrinologist, you will: • Provide specialist consultant oversight within structured weight management programmes, • Lead on complex case review, diagnosis and optimisation of treatment plans, • Maintain clinical governance and high standards across GLP-1 pharmacotherapy pathways, • Contribute to service development and pathway refinement, • Collaborate closely with Dietitians, Psychologists, Obesity Nurse Specialists and Medical Leads, • Support quality improvement, education and potential research initiatives The service has supported close to one million patients across multiple European markets and continues to scale rapidly within the UK. Flexible by Design for a Consultant Endocrinologist • Permanent Consultant Endocrinologist position (part-time or full-time), • Fully remote working from anywhere in the UK, or optional hybrid model (London), • Flexible scheduling to align with existing clinical or portfolio responsibilities, • Home working allowance to create your ideal workspace Competitive Salary & Benefits • Highly competitive Consultant Endocrinologist salary, • Company pension scheme, • Enhanced parental leave, • Training and development allowance to support ongoing professional growth, • Opportunity to work within a high-growth, award-winning digital health service What We’re Looking For in a Consultant Endocrinologist • GMC registered Consultant Endocrinologist with inclusion on the Specialist Register, • Substantial experience in diabetes, obesity and metabolic medicine, • Consultant-level experience, ideally within weight management services, • Confidence working autonomously within a digital care model, • A collaborative, systems-thinking mindset The Opportunity for a Consultant Endocrinologist • Introduce meaningful variety into your professional portfolio, • Influence specialist pathways at scale, • Combine endocrinology expertise with digital innovation, • Deliver measurable, long-term patient impact, • Work within a clinician-led, outcome-focused environment This is a time-sensitive opportunity. If you are a Consultant Endocrinologist motivated by system-level change, professional autonomy, and delivering high-quality endocrine care in a modern, scalable model, apply now. We will schedule an exploratory call to discuss the role and your suitability for this exciting position.

Clinical AI Author – Specialist Physicians (ACAI Program | United Kingdom) Company MetaQare Global Holdings Location: Remote (United Kingdom) Type of Collaboration: Consulting / Independent Professional Engagement Company Address: MetaQare Global Holdings 254 Chapman Rd, Ste 208 #24871 Newark, Delaware 19702, USA Position Overview MetaQare is selecting a limited group of 100 highly respected and influential specialist physicians in the United Kingdom, including Consultants, Clinical Leads, Heads of Department, Medical Directors, Academic Clinicians, and recognised clinical opinion leaders, to join its international program Authors of Clinical AI (ACAI). ACAI is an elite global medical collaboration in which experienced physicians contribute their clinical reasoning, guideline-based expertise, and real-world medical judgment to the development of transparent, explainable, and evidence-based Clinical AI decision models. This is not a traditional employment position. It is a high-level professional collaboration designed for senior physicians with established clinical authority who seek intellectual leadership, international visibility, and lasting impact in the evolution of Clinical AI. Participants act as Clinical AI Authors, directly shaping a new generation of physician-led, ethically grounded clinical intelligence. Your Role as a Clinical AI Author As a Clinical AI Author, you will assume a senior scientific and strategic expert role, including: • Contributing to the design, structuring, and validation of clinical decision-making models within your specialty., • Translating evidence-based UK clinical practice (NICE guidelines, Royal College standards, NHS frameworks, and international guidelines) into structured, explainable decision logic., • Reviewing anonymised clinical cases and participating in senior-level, interdisciplinary peer-review processes., • Collaborating closely with MetaQare’s medical, scientific, regulatory, and technology teams., • Ensuring clinical rigor, traceability, explainability, and ethical integrity of all models., • Your clinical expertise is transformed into a digital clinical decision model reflecting your diagnostic and therapeutic reasoning., • Your judgment supports diagnostic pathways, risk stratification, and treatment decisions with full explainability and auditability., • You receive royalties linked to the validated clinical use of the model you help develop., • Your name becomes part of a select group of 100 physician pioneers shaping the future of Clinical AI in the United Kingdom., • MBBS / MBChB (or equivalent medical degree)., • Full registration with the General Medical Council (GMC)., • CCT (Certificate of Completion of Training) or recognised specialist registration., • Minimum 5 years of independent consultant-level clinical practice., • Preferably experience in leadership roles (Clinical Lead, Consultant, Medical Director, Academic Lead, etc.)., • Strong evidence-based clinical reasoning aligned with NICE and Royal College guidance., • Recognised as a reference expert within your specialty., • Demonstrated interest in medical innovation, Clinical AI, and decision-support systems., • Ability to collaborate as an independent medical consultant. We are seeking senior specialists across multiple disciplines, including but not limited to: Cardiology · Oncology · Dermatology · Gastroenterology · Gynaecology · Neurology · Endocrinology · Paediatrics · Allergy & Immunology · Respiratory Medicine · Internal Medicine · Psychiatry · Rheumatology · Trauma & Orthopaedics · General Surgery · Urology (Additional specialties are welcome.) What MetaQare Offers • Participation in the first global network of physician-developed clinical intelligence., • Comprehensive scientific, ethical, regulatory, and technological support., • Author agreement with a long-term royalty-based compensation model., • International visibility through the Global Medical Innovation Panel. MetaQare was founded with a clear mission: To preserve and scale clinical knowledge across time, institutions, and borders. For the first time, medical expertise can be digitally amplified without compromising scientific rigor, ethics, or transparency. Physicians who join ACAI do not work for AI — they define it. Application Process Please submit your CV along with a brief description of your specialty and current leadership role via LinkedIn Recruiter. Applications are reviewed on a rolling basis by the MetaQare Clinical Committee. 🔗 More information: 📩 Contact:

Senior Medical Writer | Medical Communications | Freelance Contract | Agency | Remote | Flexible Hourly Rate We’re looking for an experienced Senior Medical Writer to support a growing medical communications team across multiple therapy areas and channels. This role would suit someone with a strong background in Publications writing, Medical Affairs materials, multichannel content, or a combination of these, and who is confident working in a client-facing environment. Key responsibilities of the Senior Medical Writer | Medical Communications | Freelance Contract | Agency | Remote | Flexible Hourly Rate • Writing and reviewing content for scientific publications (abstracts, posters, manuscripts), • Developing medical education and multi-channel materials (congress reports, symposia, training materials), • Creating social media posts, banner ads, and digital content for medical audiences, • Working directly with clients and internal stakeholders Experience & Skills of the Senior Medical Writer | Medical Communications | Freelance Contract | Agency | Remote | Flexible Hourly Rate • 10+ years working in a medical communications agency setting, • Background in either publications writing, medical affairs materials or promotional, • Experience in oncology, immunology, and/or cardiovascular disease areas, • Ideally client facing Contractual details of the Senior Medical Writer | Medical Communications | Freelance Contract | Agency | Remote | Flexible Hourly Rate • ASAP start, • Must be available 3+ days per week, • Outside IR35 (for UK candidates)

Job Title: Senior Combat Systems Engineer Salary: Up to £49,000 dependent on skills and experience Location: Scotstoun – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role What you’ll be doing: • Assisting the Technical Lead with producing and developing complex designs, and compartment layouts, in line with specifications, quality and technical standards, and customer requirements. Whilst performing detail design appraisals in assigned areas of the Ship to ensure all design intent is maintained., • Provides support to ongoing Installation, Set to Work and Trials and Acceptance activities., • Investigate into System Obsolescence on Ship installed parts, • Develops and maintains skills and capabilities to be able to provide technical support and knowledge to other design Disciplines as required. (seeking and sharing good practice and knowledge to continuously improve practices and processes)., • Assist with the production / maintenance of design artefacts in support of Detail Designers to ensure that Combat Systems compartment layouts are viable and in line with design intent., • Provide support to resolution of technical issues through Installation, Setting to Work and Trials activities. Applies Systems Engineering and Lifecycle Management Processes to ensure design viability. Your skills and experiences: Essential: • HNC/HND in an engineering or scientific discipline, or equivalent, or demonstration of comparable suitable experience., • Understanding of System Engineering design Lifecycle. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Desirable: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive. The Combat Systems Physical Integration Team: You’ll join the Type 26 Combat Systems Team, working across the full ship lifecycle and multiple platforms. Our work spans a wide range of systems, including Gunnery and Guided Weapons, Communications, Sensors (Above and Below Water), Shared Infrastructure, and Navigation. From early concept and compartment ownership through to setting to work, commissioning, sea trials, and final acceptance, the team is involved at every stage. Along the way, we tackle the challenges of technical change and manage the impacts of obsolescence, ensuring systems remain effective and integrated. Together, we play a key role in delivering the Royal Navy’s next-generation Type 26 Frigates. Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 6th March 2026 – Interviews will take place w/c 16th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-AP1 #LI-hybrid

Job Title: Senior Regulatory Labelling Consultant (Labelling Strategy) Location: UK and Europe – Fully Remote Salary: Competitive Salary + Excellent Benefits Employee Type: Permanent This an exciting opportunity to join a leading CRO and be a client dedicated to an innovative and growing biotech. You will work as a regulatory affairs labelling lead for developing and established drug programs and be accountable for driving global labelling strategies. This is a challenging opportunity to demonstrate your knowledge in managing regulatory processes and supporting cross-functional teams with end-to-end labelling processes. This role can be based in the UK or Europe and offers the right candidate a chance to take the lead on regulatory labelling processes. The position will focus on global markets and previous US and Row market experience is desirable. Responsibilities: • Support end-to-end labelling processes including driving labelling strategies for both development programs and established drugs, and oversee all operational labelling activities., • Be responsible for executing and effective quality control reviews and tracking (primarily) internally used labeling documents (Core Data Sheet, Core Patient Information Leaflet, Core Instructions for Use) and outward facing local/regional labeling (EU SmPC, EU PIL, etc) as well as container and carton labels to meet regional regulatory requirements and ensure consistency between labeling, labels and supportive documents., • Act as operational expert for the Global Labeling tracking in RIMs, ensure development and maintenance of templates, collaboration features and system upgrades., • Contribute to the continuous improvement of the end-to-end labeling process including excellent proofreading/editing skills and compiling supportive documentation., • Support labeling inspection/audit readiness activities., • Conduct international labeling operations activities to support global new product and supplemental applications to product registration, and post approval launches for impacted international markets., • Collaborate with Technical Operations team members to ensure commercial distribution, Regulatory Technology for labeling submissions, PV for safety reporting, and other functional groups. Provide labeling to Advertising and Promotion for marketing pieces, and with Commercial for website postings if needed., • Work with Regulatory Operations, Regulatory Affairs, Tech Ops, etc. for labeling distribution, tracking and quality control., • Utilize regulatory/product knowledge to provide operational support to ensure that labeling materials meet regulatory and company requirements and timelines. Skills and Experience: • University Degree in a scientific degree., • Experienced in the following, CCDS, PIL, USPI, Target label profiles., • 5+ years of experience in drug development especially in labelling, product package coordination, clinical supplies/packaging, supply chain regulatory affairs, or quality., • Good working knowledge of key labeling regulations/guidance and past experience in label development, • The ability to research and create comparator labeling documents, • Electronic document management systems use and / or electronic submission experience, • Solid understanding of requirements for tracking of labeling updates. Understanding of label development and submission processes preferred., • Solid aptitude for use of IT systems; Regulatory Information Management System (RIMS), electronic document management system (EDMS). Ability to manage the review and approval of labeling in a document management system., • The ideal candidate should be action oriented, customer focused, ability to manage workloads and set priorities. In addition, he/she should be capable of dealing with ambiguity, be creative, be comfortable working with multifunctional teams, • Fluent in English written and spoken To be considered for this position you must be based in the following locations: Romania, Lithuania, Poland, Czechia, Hungary, Spain, Italy, Croatia, UK, Ireland, and Serbia. Please note this role does not offer sponsorship and the right candidate must hold the Full Right To Work. For more information please contact

As part of Calibre Scientific, our instrumentation service team works throughout the UK and Ireland on a diverse range of laboratory equipment. We have teams in chromatography, spectroscopy and wet chemistry, and adjacent service teams in lab equipment and services. Our teams support customers in many sectors including healthcare, life sciences, food & drink and pharma agriculture, oil, gas and renewables. Position Summary: This role provides field-based service support for NIR and Wet Chemistry instrumentation across the UK and Ireland. The position comes with full training on Wet Chemistry systems from an experienced Field Service Engineer and training for NIR systems from other Field Service personnel. The Field Service Engineer will deliver servicing, troubleshooting, and breakdown support for legacy FOSS NIR instruments and FOSS/OPSIS Liquid Line wet chemistry systems. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily (other duties may be assigned). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Perform scheduled service, preventative maintenance, and verification on NIR and Wet Chemistry instruments., • Provide on-site and remote diagnostics and breakdown repairs for legacy FOSS NIR systems (e.g., 5000/6500, DS2500, SpectraStar, Rapitec etc.) and FOSS/OPSIS wet chemistry instruments., • Capture and retain technical knowledge from an experienced wet chemistry Field Service Engineer to ensure continuity of expertise., • Manage service visits across the UK & Ireland, including regular travel and some short-notice requirements., • Produce accurate service reports following all site visits and activities., • Complete accurate expense accounting related to travel and service visits., • Use service-related software tools, manage instrument files, and support customers in resolving networking or software-related issues where relevant.

Field Service Engineer Medical Devices North London / East Midlands – Leicester to the North running East to London. Ideal locations – Northampton, Luton, Milton Keyne, Essex, Cambridge across to (Most Western point considered) High Wycombe / Aylesbury. £35-37k Salary / Additional Bonus Excellent package including company car or car allowance / corporate benefits. Market leading manufacturer and reseller who are a global supplier of medical technology for critical care, operating theatre and home healthcare applications. Our mission is to provide high quality innovative products to patients and caregivers... Product Portfolio – Capital and consumable medical ventilation products, Operative care solutions. This role is focused on service provision for ventilators used in the paediatrics and neo-natal space. Role – The Field Based Engineer will be responsible for the support and maintenance of existing ventilation medical device products used in NHS and private hospitals as well as the ‘roll out’ and implementation of equipment at new customer sites. The position involves maintenance and general support across hardware and software with responsibility for ensuring service agreements are adhered to. Key functions to include – • Equipment repairs, • Scheduled routine maintenance, • New product installs, • Customer Education / assistance. Experience required • Candidates who are experienced field service engineers from the medical device or associated markets are of huge interest, but experienced field service professionals used to working on equipment that spans the medical, life science, laboratory or scientific markets are urged to apply., • Biomedical engineers looking to mov into Field Service with real hunger and passion may be considered as may exceptional candidates with non-sector aligned experience (they need to be exceptional)., • Candidates form the armed forced who have service experience with medical products are also of significant interest., • Qualification in technical engineering or technical education with sound technical knowledge, • Technical aptitude to understand, train customers and users on products Excellent mastery of English, • Flexibility to travel and willingness to overnight on occasion (covering other territories), • Ability to work autonomously in a constantly changing environment. Self-motivated with the ability to work independently, • Capacity to manage time constraints, • Driving license Progress Sales Recruitment is a specialist sales only medical recruitment consultancy dedicated to offering client and applicants alike the highest levels of service. With over 8 year’s experience in recruitment we specialise in the following areas of work - Nurse Advisers, Clinical Specialists, Theatre Sales Specialists, Sales Executives, Business Development Managers, Team Leaders, Sales Managers, Sales Directors and all other sales focused roles within the medical sector. Our core therapy areas include Vascular, Endoscopy, Urology, Neurology, ENT, Infection Control, Anaesthesia, Blood Products, Diathermy, Infusion, Orthopaedics, Surgical Instruments and all PCT, Primary, Secondary, Theatre and Rehabilitation products.

The Role: SAR Signal Processing Engineer Remote or Hybrid options available Hybrid base: Bristol We’re working with a space technology team looking to add a SAR Signal Processing Engineer to support the development of advanced satellite radar capabilities. This role is ideal for someone who enjoys working deep in the signal processing stack, from algorithm development through to real data analysis and product generation. What you’ll be working on • Developing algorithms in the field of Synthetic Aperture Radar (SAR), • Prototyping, implementing, and testing SAR processing chains, • Processing and analysing satellite data, and generating value-added products, • Writing technical documentation, project reports, and scientific publications What we’re looking for • Master’s degree in Electronics Engineering, Telecommunications Engineering, or a related field, • At least 2 years of hands-on experience in satellite SAR signal processing, • Strong skills in Python and/or MATLAB or Octave, • Confident communicator with fluent written and spoken English Nice to have • Experience with satellite ground systems, • Knowledge of a compiled language such as C or C++ If you’d like to learn more, or you know someone who could be a strong fit, feel free to reach out or apply directly.

The Opportunity We are working exclusively with a leading UK property and asset management business on the appointment of a Senior Facilities Manager for a high profile science and innovation park in Glasgow. This is a senior site based leadership role supporting the Site Director in delivering first class operational performance across a dynamic, laboratory led environment. This is not a traditional FM role. The successful candidate will play a key part in the strategic positioning, operational excellence and continued growth of a thriving innovation campus supporting life sciences and research led occupiers. The Role Reporting into the Site Director, responsibilities will include: • Supporting the leadership and operational management of the site, • Ensuring compliance across health, safety and statutory obligations, • Supervising operational teams and driving high standards of service delivery, • Monitoring budgets and supporting financial planning to meet agreed targets, • Working closely with occupiers to ensure facilities meet the needs of scientific and commercial users, • Supporting laboratory growth, refurbishment and expansion projects, • Identifying cost saving and value enhancing initiatives, • Contributing to marketing strategy and external positioning of the park, • Building strong relationships with local authorities, government bodies and the wider scientific and business community This role blends operational management, commercial awareness and stakeholder engagement within a highly visible and complex environment. About You • Minimum 3 years experience in a similar Facilities Management role, • Strong knowledge of compliance, health and safety standards, • Experience managing budgets and driving financial performance, • Excellent stakeholder management and client facing skills, • Experience within a science park, life sciences or wet and dry laboratory environment would be advantageous but not essential This is an excellent opportunity for a commercially minded Facilities professional looking to step into a senior role within a growing and innovation focused environment. If you would like to discuss confidentially, please get in touch directly.

Job Title: Supplier and TPM Quality Systems & Compliance Manager Location: Remote (UK or Europe) Salary: up to £65,000 About Us Join one of Europe’s fastest-growing nutrition companies. Kendal Nutricare creates world-class nutrition for every stage of life, from Kendamil infant and toddler formula to Kendalife adult nutrition. We’re a family-owned, purpose-driven business with big global ambitions. In 2025, we were ranked the UK’s fastest-growing food and drink company, with Kendamil now one of the fastest-growing baby brands in the world, the No.1 Organic formula in both the UK and the USA, and available in 40+ countries (and counting). As the only British infant formula manufacturer, we’re proud to produce our award-winning products here in the UK using British full-cream milk, with no palm oil or unnecessary additives. Trusted by families worldwide. We’re scaling fast and building something special. We’re on an exciting path – join us! The Role Kendal Nutricare is seeking a dedicated Supplier & Third-Party Manufacturer (TPM) Quality Systems & Compliance Manager to oversee and enhance the quality and compliance of our supplier network. In this role, you will be responsible for leading supplier and third-party manufacturer quality systems to ensure regulatory compliance, food safety, and adherence to internal standards. The role oversees supplier qualification, specifications, FSVP and QTAs, while monitoring performance and driving continuous improvement. It also leads non-conformity and complaint investigations, ensuring effective root cause analysis, CAPA implementation, and protection of product quality and supply chain integrity. Key Responsibilities • Provide technical support for qualification, approval, and ongoing monitoring of raw material suppliers, packaging suppliers, and third-party manufacturers (TPMs)., • Conduct supplier risk assessments, monitor performance KPIs, and drive continuous improvement programs across suppliers and TPMs., • Review and approve product and raw material specifications, CoAs, allergen documentation, and regulatory compliance to ensure alignment with internal Quality, Food Safety, and regulatory standards., • Collaborate with R&D, Regulatory, PMO, Operations, and TPMs to ensure supplier and material readiness for qualification and new product development., • Maintain and enforce supplier compliance with preventive controls, hazard analysis, FSVP requirements, SOPs, QTAs, and quality system documentation., • Investigate non-conformities, audit findings, deviations, and consumer complaints; conduct root cause analysis and implement effective CAPAs., • Analyze trends and implement risk mitigation strategies to continuously improve supplier and TPM performance and ensure supply chain quality. Qualification and experience: • Bachelor’s degree in Food Science, Microbiology, Chemistry, Engineering, or related scientific field., • 5+ years of experience in Supplier Quality, Quality Systems, or Regulatory Compliance within Infant Formula, Dairy, Dietary Supplement, or CPG industries., • Strong knowledge of global infant formula standards and food safety regulations (e.g., US FDA, Health Canada, Codex)., • Experience with third-party manufacturers and contract manufacturing environments., • Proven ability to create and approve raw material/product specifications and manage Quality Technical Agreements., • Skilled in leading continuous improvement, change management initiatives, and managing consumer complaint investigations related to product quality, safety, and regulatory compliance. What we offer • 33 days holiday (incl. bank holidays), • Matched pension up to 5%, • Free health cash plan & gym membership, • Life assurance (2x salary), • Employee assistance programme, • Product allowance for new parents, • A chance to be part of the fastest-growing infant milk brand in Europe

You will challenge Large Language Models on their understanding of population health, biostatistics, and global health equity—ensuring that the models prioritize scientific consensus and ethical health guidelines. Prior experience in health communication, clinical research coordination, or public

What You'll Do as a Senior Software Engineer. Engage with other system engineers, payload developers, and mission operators to continuously evolve the software in support of scientific objectives. Spacecraft Software Engineer (GNSS).

We are looking for talented Technical Project Manager at the Managing Consultant level. As inventive transformation consultants, we blend our strategic, creative and scientific capabilities, collaborating closely with clients to deliver cutting-edge solutions. Stakeholder Communication: Skilled in p

At Capgemini Invent, we believe difference drives change.As inventive transformation consultants, we blend our strategic, creative and scientific capabilities, collaborating closely with clients to deliver cutting‑edge solutions.Join us to drive transformation tailored to our client’s challenges

Role: Cloud Strategy Consultant / Senior Consultant. As inventive transformation consultants, we blend our strategic, creative and scientific capabilities, collaborating closely with clients to deliver cutting‑edge solutions. As a Consultant: lead a stream of work, produce high‑quality deliverab

Electronics & Controls Engineer.

Strong scientific and strategic understanding of what it takes to drive exciting opportunities towards advanced drug discovery and appreciation of the use of preclinical cancer models to support therapeutic discovery. Therapeutic Opportunities lead. In this key, high‑impact role you'll assess new

Postdoctoral Research Scientist. The CRUK Scotland Institute is a cancer research institute, situated in Glasgow with approximately 250 researchers split across 30 research groups consisting of PIs, postdoctoral scientists, PhD students and scientific officers. We are seeking a highly motivated Post

Job Title: Refrigeration Engineer Location: Glasgow Pay Range/details: £51,027.59 per annum Contract Type: Permanent - Asda Contract Omega are supporting a leading facilities management provider in their search for a Refrigeration Engineer work on a major UK supermarket contract. The right Refrigeration Engineer will be the first line in all service and maintenance throughout allocated sites. They will also effectively maintain service and repair Refrigeration Equipment in customer locations and aid HVAC equipment containing refrigeration circuits. Key Responsibilities - Refrigeration Engineer Carry out reactive and planned refrigeration maintenance within agreed timescales. Diagnose faults, identify non-repairable issues and recommend replacements. Complete all PPM, technical and compliance paperwork accurately and on time. Order and fit parts in line with company procedures. Respond promptly to Helpdesk service calls and complete repairs efficiently. Communicate issues affecting store operations to GSMs and build strong working relationships. Complete surveys, reports and job documentation as required. Participate in the out-of-hours standby rota and arrange cover when needed. Work safely, following all Health & Safety requirements and company policies. Maintain professional conduct and support company/ASDA colleagues to uphold quality standards. Undertake training to keep skills up to date and complete all mandatory online modules. Qualifications & Requirements - Refrigeration Engineer Time-served apprenticeship with NVQ/C&G refrigeration qualification. C&G 2079 / CITB refrigerant handling certificate. Strong refrigeration, electrical, mechanical and diagnostic skills. Ability to read technical drawings and apply relevant H&S legislation. Good communication and customer-facing skills. Self-motivated, professional and able to work at heights using access equipment. Full UK driving licence essential. What we can offer - Refrigeration Engineer 33 Days Holiday (Inc. Bank Holidays). Private Pension. HealthShield Cashback Plan - Reclaim part of your dental/optical costs. OneCity - Employee Discount Platform. Employee Value Awards up to the value of £250. Access to Costco Personal Membership Subscription. Mental and Physical Health Services (Wisdom, Thrive, SkinVision). Electric Car Scheme (Criteria Applies). First Bus Commuter Club - Discounted Bus Travel. For more information on this role, please contact Michael Farrell on 01453 829768 or send a copy of your CV to Candidates who are currently a Refrigeration Engineer, HVAC Engineer, Air Conditioning Engineer, Maintenance Engineer or Service Engineer may be suitable for this position. For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. TPBN1_UKTJ

New: Senior Medical Writer (Remote UK/Europe) - Growing Global HEOR & Market Access Consulting firm.An exciting opportunity to join a growing consulting firm with one of the best staff retention rates in the healthcare/pharma space.Be part of a fun, people focused culture where everyone looks out fo

Network Scientific is a multi‑award‑winning scientific agency with bold growth plans and a reputation for doing things differently. For more than a decade, we’ve partnered with pioneering organisations across the scientific, healthcare, and technology sectors; from start‑ups and university s

You will provide high-level scientific counsel to global pharma clients, diagnosing communication challenges and designing peer-to-peer exchange platforms and scientific narratives that shift perceptions. Oversee the strategic direction of medical communications programmes, including scientific narr

Interpret and analyze complex data, research findings and scientific information to create clear, concise, and accurate tactics for different audiences and channel. Minimum 7 to 12 years of medical/scientific writing experience in pharmaceutical companies or medical communications agencies. Being up

We're a scientific research organisation creating peer-reviewed research articles for publication in top tier journals. We work on files in Adobe Illustrator and we're looking for a designer with expertise with AI files and specific experience in producing high quality figures for scientific researc

Monitoring market information / scientific developments to continue to advance capabilities and scope of technology for the benefit of the end user.

Zest Scientific is partnering with a rapidly expanding, award-winning digital healthcare provider delivering specialist weight management services across the UK and Europe.

Are you interested in a leading role to shape the infrastructure and systems of one of the worlds most widely used scientific data resources?Ensembl is the leading resource for exploring and analysing genomes, used by researchers globally on a daily basis.

A Home Based Technical Sales Engineerwith strong customer facing skills and proven experience of working within a Sales / Inside Sales /Applications role within a Scientific products, Life Science or related electronics environment will join an established High-Tech Company.

Oversee scientific team content development ensuring high quality standards and scientific excellence are consistently delivered. A Scientific Director is the scientific lead on their account(s), responsible for informing and driving the clients communications strategy. Acting as a key scientific le

You will oversee a talented team of medical writers, providing strategic scientific direction, guiding publications and emerging medical communications activities, collaborating, and mentoring to deliver high-quality, impactful content for a demanding, scientifically rigorous European-based client,

Proven scientific leadership across multidisciplinary teams and multiple therapeutic areas, ensuring scientific rigour and excellence throughout all deliverables. Headquartered in Princeton, New Jersey, with teams in Switzerland, the United Kingdom, India, and Japan, we help biopharmaceutical organi

A leading medical device supplier is seeking a Territory Sales Manager for the South London and South East region.The role offers a £42,000 basic salary, commission, and a company car or allowance.Ideal candidates will have sales experience in medical devices, excellent communication skills, and a

We are catalyzing the Scientific AI revolution by designing and industrializing AI-native scientific data sets, which we bring to life in a growing suite of next gen lab data management solutions, scientific use cases, and AI-enabled outcomes. Biology, Chemistry, or related field); able to hold cred

A leading scientific software company in the UK is seeking a Full Stack Engineer to join its innovative team. React, collaborating with various teams to enhance scientific research applications.

An innovative and fast-growing distributor of medical products and services within the pre-hospital, blue light and hospital market places.Established for over 20 years this company has expanded its product range exponentially, making them a go to supplier in their respected field.This is a full-tim

We are catalyzing the Scientific AI revolution by designing and industrializing AI-native scientific data sets, which we bring to life in a growing suite of next gen lab data management solutions, scientific use cases, and AI-enabled outcomes. TetraScience is the Scientific Data and AI Cloud company

Primarily responsible for supporting and developing the BEAS Manufacturing module—covering Item Master Data, Bills of Materials, Routings, MRP, and Capacity Planning—and supporting associated functions such as Engineering, Production, Warehouse, Purchasing, and QC.The role mainly supports BEAS o